Integgrated - ASI Building Products

Comments

Transcription

Integgrated - ASI Building Products
Full Product Line Catalog
Integ
grated
Revised May 2006
Solutio
ons
Table of Contents
PowerPole.......................................... 2
MX Series........................................... 3
PRO 19 .................................................4
PRO 14 ................................................4
Pro Cut-Off ........................................ 5
Pro Cut-Off Gauge ........................... 5
Side-Winder ....................................... 5
Brake Buddy ..................................... 5
Snap Stand ........................................ 5
Angle Gauge ...................................... 5
MAX-I-MUM XL ................................. 6
Adjustable MAX Cut-Off ................ 6
“Windy” SP ........................................ 7
Folding Legs ...................................... 7
Slitters ............................................... 7
PRO-Coiler .......................................... 7
Siding and Saw Tables................ 8-9
Portable Flashing Brake ...............10
Bronco Job Horse
and Leg Extensions....................01
Specifications ..............................11-12
™
The Only Drill Powered
Scaffolding System
Nine
PowerPoles
were used
to install
200 foot
seamless
siding. All
drills were
plugged into
a 20 amp
breaker.
Place drill in
the “quick
connect”
brace and
you’re
“locked and
loaded”.
• Quickly moves material and crew
– increases time on the job.
• Drill provides rapid lifting – improves
job performance.
• No more pumping
– creates more energy and focus.
Increased Profitability
Your Competitive Advantage!
• Easy to assemble and transport
which increases job efficiency.
• No more pumping
– drill does all of the work,
eliminates fatigue.
• Single carton packaging
– easy to warehouse and distribute.
2
Tapco Products Company (800) 521-7567
•
• Made from structural grade
aluminum creating a safe and
stable system.
• Independently locking lever
“clicks” to confirm that you
are locked in place.
• Rigid triangular standoff brace
sets a new standard in support.
www.TapcoTools.com
Commercial Bending System
System includes an MX Series™ Brake, MX Stand™ and Adjustable MAX Cut-Off™
Die castings with
reinforcing ribs
Double-walled
pivot arms
New ergonomic
handles
Adjustable
MAX Cut-Off™
Moving hinge system
is easy to maintain
Superior Bending Capacity
Total Stability
• Revolutionary moving hinge system increases bending power
without marring materials. Also slides for easy maintenance.
• Die-castings with reinforcing ribs to reduce deflection and
increase bending performance.
• Double-wall pivot arms provide added strength.
• Ergonomic handles provide added leverage.
• Brake features a 19 5/8" throat depth with a 1 7/16" mouth opening.
• MX Stand offers complete
stability with its trapezoid
design.
• Wider plank increases
stability while bending.
3
Tapco Products Company (800) 521-7567
•
www.TapcoTools.com
PRO 19™
Bends and manufactures trim work on
the job site with maximum throat depth for
expanded capabilities.
• Tapco's exclusive Unilink technology!
You’ll never have to adjust your brake again.
• 19" (48,3 cm) throat depth—largest in the industry for more efficient bending.
• Stores material inside bender—reduces handling and flipping of material and speeds up bending.
• Lightweight, high-tech anodized alloys and computer designed die castings.
• Patented “Moving Pivot Hinge” increases bending power without marring material.
• Patented inside working pockets and 23/8" (6,0 cm) mouth opening.
• 180° hemming capability for making more rigid panels.
• Available in 8'6", 10'6" and 12'6" lengths.
PRO 19™
Shown with:
• Angle Gauge
• Side-Winder
• Snap Stand
• Wheel Kit
19” Throat depth
PRO 14™
Bends and manufactures trim work on the job site.
• Tapco's exclusive Unilink technology!
You’ll never have to adjust your brake again.
• 14" (35,6 cm) throat depth with patented large inside
working pockets and a 23/8" (6 cm) mouth opening.
• Lightweight, high tech anodized alloys and computer
designed die castings for strong, durable performance.
• Patented “Moving Pivot Hinge”, the world’s most advanced
hinge design, for unparalleled bending performance.
• Fast, strong, positive clamping.
• 180° hemming capability for making more rigid panels.
• Available in 8'6", 10'6" and 12'6" lengths.
• Heavy Duty version available in 10'6" length.
PRO 14™
14” Throat depth
Shown with:
• PRO Cut-Off
• PRO Cut-Off Gauge
• Side-Winder
• Snap Stand
• Wheel Kit
4
Tapco Products Company (800) 521-7567
•
www.TapcoTools.com
Pro™ Cut-Off
Brake Buddy™
Quickly, safely, and easily makes factory quality
cuts in coil stock, sheet metal, and vinyl right on
your brake.
Instant roll forming tool for portable brakes.
• Produces straight, square
cuts. Reduces scrap and
eliminates knifing damage to
costly bending hinges.
• Lightweight aluminum
construction built to last.
• Hardened and captured tool
steel cutting knives for safety and durability.
• Eliminates use of dangerous utility knives and open blades.
• For use with all PRO Series Brakes (1995 and after).
• Molded carrying case protects tool when not in use.
Includes
molded plastic
storage case.
• Quickly and easily forms brick mold trim and decorative
ribs in .019 aluminum, PVC coated
aluminum, and vinyl coated trim coil.
• Steel lower rollers for durability.
• Utilizes the edge of
the material itself as
Includes
a guide while the rib
molded plastic
spacing is adjustable.
storage case.
Rib and Brick Mold
rollers included.
• Enables you to offer
added style and
individuality to all
your jobs.
Roller Options
Saves time and labor
in scoring and
breaking off material.
Rib Rollers
Pro™ Cut-Off Gauge
For use with the PRO 19 and PRO 14.
• Easily identifies distance for Cut-Off usage.
• Simplifies Cutting
PRO Cut-Off Gauge
(sold in pairs) #12250
Simply turn adjustment handle until roller
is at desired position for multiple ribs.
Brickmold Rollers
(shown above)
RIB PROFILE
BRICKMOLD PROFILE
Traditional
Brickmold Roller*
*Sold separately
TRADITIONAL BRICKMOLD PROFILE
V-Groove
Rollers*
*Sold separately
V-GROOVE PROFILE
Snap Stand™
Heavy Duty Transportable Support for all PRO Series
Brakes, ProTrax and MaxTrax Saw Tables.
•
•
•
•
Side-Winder™
Works in tandem with PRO Series Brakes to
prevent coil damage.
• Allows you to feed coil directly into the jaws of your
PRO Brake. Decreases damage from handling coil stock.
• Attaches in seconds to the PRO 19 or PRO 14.
(modification may be needed to use unit on MAX-I-MUM
units & 12'6" PRO brakes)
• Holds up to 24" (61,0 cm) wide coil.
Weighs only 24 lbs. (10,7 kg)
Keeps the coil at
your side where
you need it!
Legs adjust independently to level on uneven ground.
Brakes and Saw Tables easily snap and lock in place.
Durable aluminum for long life.
Folds flat for easy
storage.
• Sets up in seconds.
• Optional wheel kit
(shown) allows for
easy movement.
Snap Stand™
• Five height
• Optional Wheel Kit:
adjustments
Easy to attach,
from 29" - 34".
10" Pneumatic tires,
Steel hub.
Angle Gauge
• Mounts easily on any PRO
or MAX-I-MUM II brake
built after 1995.
• Quickly shows the
bending angle.
Angle Gauge for PRO and
MAX series brakes #11663
Tapco Products Company (800) 521-7567
5
•
www.TapcoTools.com
MAX-I-MUM XL System
Includes MAX-I-MUM II ™, MAX Snap Stand, MAX Snap Stand Wheel Kit
and MAX Cut-Off ™ (vMAX 20 also includes tune-up kit)
• Bends and forms commercial metals on the job site.
Used for commercial, architectural and industrial sheet metal fabrication.
• 19" (48,3 cm) throat depth with a 23/8" (6,0 cm) mouth opening.
• Constructed with lightweight, high-tech, anodized
alloys for strength, durability, and portability.
• Strong, computer designed die castings
for the toughest jobs.
• Patented “Moving Pivot Hinge” increases
bending power without marring materials.
• Quick, strong, and positive clamping.
• Unique hemming capability (180° overbends).
• Portable, for use in the shop or on the job site.
• Available in 8'6", 10'6", 12'6" and 14'6" lengths.
(NOTE: 14'6" comes with 2 Snap Stands for even support.)
• Adjustable MAX Cut-Off included in purchase.
Adjustable MAX Cut-Off™
Makes factory quality cuts in commercial sheet metals
right on the MX SERIES or MAX-I-MUM II™ Brakes.
• Heavy duty roller shear.
• Adjustment allows cuts on a large range of materials.
• Hardened and captured tool steel cutting knives for
safety and durability.
• Eliminates the need for unsafe utility knives and
conventional shears.
• Pays for itself by reducing scrap and costly knifing
damage to bending hinges.
Includes
molded plastic
storage case.
Adjustable nut
6
Tapco Products Company (800) 521-7567
•
www.TapcoTools.com
“Windy” SP™ Port-O-Brake®
The “Workhorse of the Industry” for over 30 years.
• Locking system design provides more clamping power
with less effort. Locks on a wider variety of material
thicknesses with no need for adjustments.
• 14" (35,6 cm) throat depth.
• Stainless steel bending edge.
Accurate built-in depth gauges.
• Capable of 130° overbends.
• Accommodates PRO-Coiler to keep your coil off the
ground and at your fingertips for faster bending.
• Removable bending handle for easy transport.
• Available in 8'6" and 10'6" lengths.
Folding Legs
Light duty leg set for use on the “Windy” SP .
• Tubular steel construction.
• 30" high, folds compactly.
Port-O-Slitter®
MAX-Slitter™
Portable precision slitting and rib forming system
for use in the shop or on the job site.
Portable precision slitting and rib forming system
for use in the shop or on the job site.
• Slitters come with two sets of cutting knives to make single
or multiple factory quality cuts in aluminum, steel, galvanized
steel, stainless steel, copper, vinyl, paper and some textiles.
(Ask your distributor for details.)
• Forms strengthening ribs and perforates most materials.
• 24" (60,9 cm) Port-O-Slitter with 2" (5,1 cm) shaft, weighs only
82 lbs. (37,2 kg).
• Optional 1/2 H.P. Motor Kit
(specify 110v or 220v),
available.
• 48" Slitters come with two sets of cutting knives to make
single or multiple factory quality cuts in aluminum, steel,
galvanized steel, stainless steel, copper, vinyl, paper and
some textiles. (Ask your distributor for details.)
• Forms strengthening ribs and perforates most materials.
• Motor kit available in 110v or 220v. Saves even more time!
Port-O-Slitter shown with
optional accessories:
Slitter Snap Stand,
Slitter Cut-Off,
and PRO-Coiler
The MAX Slitter System comes
with MAX Slitter, Slitter Cut-Off,
Slitter Snap Stand with wheels,
1/2 H.P. Motor Kit (specify 110v
or 220v), and one Modular Table.
PRO-Coiler™
Portable trim coil holder for use with “Windy” SP™ and Port-O-Slitter®.
•
•
•
•
•
Lightweight and easy to use.
Attaches and detaches easily.
Holds up to 24" x 100' coil.
Allows coil changes in seconds.
Helps to increase production and
eliminate waste.
Tapco Products Company (800) 521-7567
* Perforating rolls
sold separately.
•
www.TapcoTools.com
7
ProTrax™ Saw Table
The saw table designed for professional siding mechanics.
• Fast & Easy Setup.
• Work surface 13" wide.
•
•
•
•
•
•
•
•
•
•
Cuts multiple angles from 3/12 to 12/12.
Weight 80 lbs (deck 60 lbs / boom 20 lbs).
Sub-structure provides self cleaning surface.
Accomodates almost any 7¼" circular saw.
Captured saw track provides secure & safe operation.
Free-floating saw boom for flexibility
and time savings at the job site.
Lightweight and durable tubular frame system.
Fits on Snap Stand.
Optional Deck Extender Kit expands deck to 20"
in width; converts to universal work station
for layout and cutting of materials.
Cuts 3/12 pitch on panels up to 9" tall.
ProTrax™
Shown with:
• Snap Stand
• Wheel Kit
(saw not included)
ProTrax™ Deck Extender Kit
• Extends table deck from 13" to 20" to accomodate wider materials
including siding, soffit, and decorative siding profiles.
• Converts the saw table into a layout table or universal workstation.
• Kit contains 2 extensions.
8
Tapco Products Company (800) 521-7567
•
www.TapcoTools.com
MaxTrax™ Saw Table
The saw table designed for professional siding mechanics.
saw table with oversized work surface
• First table designed specifically for oversized
shake and shingle panels or 16" soffit.
• Work surface 20" wide.
• Cuts angles from 3/12 to 12/12 even on 16" panels.
• Designed for ease of set up, break down and use.
• Sub-structure provides self cleaning surface.
• Accomodates almost any 7¼" circular saw.
• Free-floating saw boom for flexibility and
time savings at the job site.
• Captured saw track provides
secure & safe operation.
• Lightweight and durable tubular frame system.
For optimum performance the MaxTrax should
be used in conjunction with the Snap Stand
MAXTrax™
Shown with:
• Snap Stand
• Wheel Kit
(saw not included)
MiniTrax™ Saw Table
mini
light duty saw table
• Lightweight, only 47 lbs.
• Compact
• Captured saw track
• Full range of angles from 3/12 to 12/12
• Spring loaded material grip
• Aluminum frame
MiniTrax™
Shown with:
• Pair of Broncos
(saw not included)
Full range of angles
from 3/12 to 12/12
9
Tapco Products Company (800) 521-7567
•
www.TapcoTools.com
Portable Flashing Brake
A portable Hand Brake
• Many uses: chimney flashing and counter flashing, wall flashing,
window sills, window wrapping and siding, door thresholds.
• Simply insert material between the plates, press down, and bend.
• Combine units to increase the length of flashing bent at one time.
• Available in 36" and 48" lengths.
• One side brakes flashing at 3½". The other side brakes counter
flashing 5/8" for leglet.
48" Brake
36" Brake
Bronco™ Job Horse
• Ideal for exterior applications where uneven and
difficult ground conditions are common.
• A pair of Broncos can be set up with a level
platform height of 34" to 60".
• Each pair easily supports a 24 foot plank or 600
pounds per pair.
• The extra wide frame (48" average base spread)
and tapered tripod design provide stable plank
access.
• A positive lock spring pin engages every 1½" on
each leg.
• Weighs only 46 pounds per pair; folds flat for easy
transport and storage.
Bronco™ Leg Extensions
• Leg Extensions allow the Bronco to go as high as 90".
• 3 leg extensions per box.
10
Tapco Products Company (800) 521-7567
•
www.TapcoTools.com
Specifications
Accessories
Tables
Brakes
ITEM #
PRODUCT
Feet
LENGTH
Meters
WORKING WEIGHT
Pounds Kilograms
24'(ht.)
7.32m
148.1 lbs.
67.18 kg
13394
PowerPole
14470
MX 8
8'6"
2.59 m
314 lbs.
142.4 kg
14471
MX 10
10'6"
3.20 m
325 lbs.
147.4 kg
14472
MX 12
12'6"
3.81 m
341 lbs.
154.6 kg
10556
PRO 19 Brake
8' 6"
2,59 m
96 lbs.
43,4 kg
10558
PRO 19 Brake
10' 6"
3,20 m
121 lbs.
54,7 kg
10560
PRO 19 Brake
12' 6"
3,81 m
147 lbs.
66,8 kg
10565
PRO 14 Brake
8' 6"
2,59 m
87 lbs.
39,3 kg
10567
PRO 14 Brake
10' 6"
3,20 m
106 lbs.
48,1 kg
10569
PRO 14 Brake
12' 6"
3,81 m
129 lbs.
58,4 kg
10568
PRO 14 Heavy Duty Brake
10' 6"
3,20 m
127 lbs.
57,6 kg
11017
MAX-I-MUM XL Commercial Bender System
8' 6"
2,59 m
133 lbs.
60,1 kg
11018
MAX-I-MUM XL Commercial Bender System
10' 6"
3,20 m
158 lbs.
71,6 kg
11019
MAX-I-MUM XL Commercial Bender System
12' 6"
3,81 m
190 lbs.
86,0 kg
10997
MAX-I-MUM XL Commercial Bender System
14' 6"
4,42 m
217 lbs.
98,3 kg
11067
MAX 20 (includes stand, cut-off and tune up kit) OFFSHORE
8' 6"
2,59 m
133 lbs.
60,1 kg
11068
MAX 20
10' 6"
3,20 m
158 lbs.
71,6 kg
11069
MAX 20
12' 6"
3,81 m
190 lbs.
86,0 kg
11070
MAX 20
14' 6"
4,42 m
217 lbs.
98,3 kg
10828
“Windy” SP Port-O-Brake
8' 6"
2,59 m
86 lbs.
38,9 kg
10829
“Windy” SP Port-O-Brake
10' 6"
3,20 m
104 lbs.
47,2 kg
11850
ProTrax Saw Table
8' 4"
2,54 m
82 lbs.
37,2 kg
11988
ProTrax Deck Extender Kit
—
—
9 lbs.
4,1 kg
12282
MaxTrax Saw Table
8' 4"
2,54 m
113 lbs.
51,3 kg
12181
MiniTrax Saw Table
5' 6"
1,67 m
47 lbs.
21,3 kg
10379
PRO Cut-Off with case
—
—
8 lbs.
3,6 kg
12234
PRO Cut-Off Gauge
—
—
1 lb./pair
0,45 kg
12261
Adjustable MAX Cut-Off with case
—
—
9 lbs.
4,1 kg
11676
Brake Buddy with Case
—
—
13 lbs.
5,9 kg
11720
Snap Stand
—
—
37 lbs.
16,8 kg
11989
Wheel Kit for Snap Stand
—
—
10 lbs.
4,5 kg
10776
Side-Winder
—
—
24 lbs.
10,9 kg
10148
Folding Legs for PRO 14
—
—
14 lbs.
6,4 kg
10147
Folding Legs for “Windy” SP
—
—
13 lbs.
5,9 kg
CAPACITIES
All Vinyl
Sheet Aluminum: Up to 16ga. (.050)
Galvanized: Up to 22ga.
CR Sheet & Coil Steel: Up to 22ga.
Soft & Annealed Copper: Up to 32oz.
Stainless Steel, ½ hard: Up to 24ga
Soft Aluminum: Up to .030
Galvanized steel: Up to 28 ga.
Copper sheet & coil: Up to 16 oz.
Soft Aluminum: Up to .030
Galvanized steel: Up to 28 ga.
Copper sheet & coil: Up to 16 oz.
HEAVY DUTY
Soft Aluminum: Up to .040
Galvanized steel: Up to 26 ga.
Copper sheet & coil: Up to 20 oz.
Aluminum: Up to .040
Galvanized steel: Up to 24 ga.
Soft & annealed copper: Up to 32 oz.
Stainless steel, ¼ hard: Up to 24 ga.
Soft Aluminum: Up to .030
Galvanized steel: Up to 29 ga.
PRO Cut-Off Cutting Capacities
All Vinyl
Aluminum: Up to .030
Galvanized steel: Up to 28 ga.
Copper: Up to 16 oz.
MAX Cut-Off Cutting Capacities
Aluminum: Up to .050
Galvanized steel: Up to 24 ga.
Soft Copper: Up to 32 oz.
Stainless Steel: Up to 24 ga.
11
Tapco Products Company (800) 521-7567
•
www.TapcoTools.com
Specifications
Tune-Up Kits
Slitters
Accessories
ITEM #
continued
PRODUCT
Feet
LENGTH
Meters
WORKING WEIGHT
Pounds Kilograms
11719
Bronco Job Horse, each
—
—
23 lbs.
10,4 kg
11833
Bronco 66" Leg Extensions, 3 legs/box
—
—
8 lbs.
3,6 kg
12240
Portable Flashing Brake, 36" length
3'
0,91 m
8 lbs.
3,6 kg
12241
Portable Flashing Brake, 48" length
4'
1,22 m
10 lbs.
4,5 kg
10367
PRO-Coiler
—
—
10 lbs.
4,5 kg
10385
24" (60,9 cm) Port-O-Slitter– 2" (5,1 cm) diameter Shaft
—
—
82 lbs.
37,2 kg
10238
MAX Slitter 48" System
—
—
250 lbs.
113,4 kg
12357
24" (60,9 cm) Slitter Snap Stand
—
—
20 lbs.
9,1 kg
12358
48" (121,9 cm) Slitter Snap Stand
—
—
37 lbs.
16,6 kg
10667
24" (60,9 cm) Slitter Cut-Off
—
—
4 lbs.
2,0 kg
10666
48" Slitter Cut-Off
—
—
7 lbs.
2,9 kg
10252
48" (121,9 cm) Modular Table
—
—
13 lbs.
5,9 kg
10388
POS 1/2 HP Motor 110V
—
—
42 lbs.
19,1 kg
10389
POS 1/2 HP Motor 220V
—
—
42 lbs.
19,1 kg
10244
MS 1/2 HP Motor 110V
—
—
42 lbs.
19,1 kg
10245
MS 1/2 HP Motor 220V
—
—
42 lbs.
19,1 kg
10819
TUNE-UP KIT for PRO-III, PRO 2000, PRO 14 and PRO 19 — 10' and smaller
10820
TUNE-UP KIT for “Windy” SP Port-O-Brake
10821
TUNE-UP KIT for W-13 , W-14, and S-II Port-O-Brakes
10818
TUNE-UP KIT for MAX-I-MUM II Benders (10' and smaller), and 12' PRO & PRO HD Brakes
11115
TUNE-UP KIT for MAX-I-MUM 12' and 14' Benders
12280
UNILINK RETROFIT KIT FOR PRO-III, PRO 2000, PRO 14 and PRO 19 — 8'6 / 10'6
12281
UNILINK RETROFIT KIT FOR PRO-III, PRO 2000, PRO 14 and PRO 19 — 12'6
CAPACITIES
24” PORT-O-SLITTER:
Soft Aluminum: Up to .030
Galvanized steel: Up to 28 ga.
Copper: Up to 16 oz.
MAX Slitter:
Soft Aluminum: Up to .040
Galvanized steel: Up to 24 ga.
Soft & annealed copper: Up to 32 oz.
Stainless steel, ½ hard: Up to 24 ga.
(Also upgrades Pivot Links of Pro-II )
All Tapco Tools are made under one or more of the following U.S. Patents:
3,161,223 4,321,817 4,651,553 4,489,583 4,493,200 4,445,356 4,372,142
4,766,757 3,817,075 4,557,132 4,240,279 4,671,094 3,482,427 4,494,397
3,559,444 5,343,728 5,353,620 5,505,069 Other U.S. & Foreign Pats. Pend.
12
29797 Beck Road • Wixom, MI 48393-2834
Phone: (800) 521-7567 • Fax: (888) 459-0702
www.tapcotools.com
© 2006 Headwaters Construction Materials, Inc.
www.theTapcoGroup.com
Item# 10813
T5396-CT 5/06

Similar documents

Tapco Brake and Tools - Lansing Building Products

Tapco Brake and Tools - Lansing Building Products with no need for adjustments. • Stainless steel bending edge. • Capable of 130° overbends. • Removable bending handle for easy transport. • Throat depth: 14", mouth opening: 3/4". ITEM #

More information

Tapco Brochure

Tapco Brochure with no need for adjustments. • Stainless steel bending edge. • Capable of 130° overbends. • Removable bending handle for easy transport. • Throat depth: 14", mouth opening: 3/4". ITEM #

More information

Tapco Tools Brochure

Tapco Tools Brochure Soft Aluminum: Up to .030 Galvanized Steel: Up to 28 ga. Copper sheet & coil: Up to 16 oz. Soft Aluminum: Up to .030 Galvanized Steel: Up to 28 ga. Copper sheet & coil: Up to 16 oz. Soft Aluminum: ...

More information