Well Light Accessories

Comments

Transcription

Well Light Accessories
Simple. Durable. Innovative.
Well Light Accessories
(CWLG1CB, CWLG2CB, CWLR1CB, & CWLGLENS)
Old world craftsmanship. . .tomorrow’s technology™
®
CAST Well Light Accessories - Increase Safety & Reduce Maintenance
Description:
CAST Lighting recommends the use of one or more of the following
accessories to increase the safety and reduce maintenance on your well
light installation.
CWLG1CB:
A 6.75” diameter solid bronze grate that secures to the well light
housing using a 3-32 hex head cup point screw with a 10/24 thread X
1-1/4” long. This application should be used in the areas where well
lights will be exposed to traffic.
CWLG1CB
CWLG2CB:
A 6.75” diameter solid bronze grate that secures to the well light
housing using a 3-32 hex head cup point screw with a 10/24 thread X
1-1/4” long. The opening in the middle allows for optimal light output
and measures: 3 1/8” x 1 5/8”. This application should be used with the
MR-16 well lights and LED Ground Lights.
CWLGLENS:
This is an optional application to be used with the CWLG1CB and is a
flat glass 4.35” in diameter (XCGGL) that secures to the underside of the
grate using (2) 8-32 screws with nylon washers, included with purchase.
The use of the CWLGLENS can help prevent the buildup of debris
within the well light.
CWLR1CB:
CWLG2CB
A 5.5” diameter solid bronze ring, which includes a 5.25” convex pyrex
glass lens (XCG538) and secures to well light housing with 2 stainless
thumb screws. This is for use in non-traffic areas, such as planting beds,
where it will keep debris from building up inside the well light.
CWLGLENS
CWLR1CB
www.cast-lig h t i n g . c o m
8 0 0 . 9 1 4 . CA S T
© Copyright 2016, CAST Lighting LLC. All rights reserved.
Revised March 2016

Similar documents