Versa-Pod - KFS Industries Inc.

Versa-Pod
®
Keng's Firearms Specialty, Inc. © 2012
www.versa-pod.com
Versa-Pod® is Quality and Innovation
QUALITY means superior materials are used throughout
Quality means that there are 18 TIG welds in every Versa-Pod bipod. Unlike our competition, we don't simply make idle claims about being durable
- we give you proof. The proof is in the way we build our bipods.
304 STAINLESS STEEL - Solid
304 stainless castings are used
at critical stress points like the
knuckle joint.
Our competitors use fabricated
sheetmetal construction.
There are 5 welds on each lower leg
band, ensuring it will never separate
from the bipod leg
POSITIVE LOCKING Our designs all use positive
locking notches. The load that
the leg is able to sustain is 15
times greater than that of designs which use a friction-type
locking mechanism.
SOLID LEGS On our bipods, the legs are
machined from solid metal
(aluminum or steel), not
hollow, bent sheetmetal
like on our competitor's
bipods. You won't
get that "springy"
feel when you
take your shot.
Compare and see the difference
yourself - when our competitors
make bipods which they claim to
have "positive locking" legs, the
legs have radial grooves which
are lathe turned, simple and
cheap - but weakens the entire
leg. Our locking notches are individually machined ONLY where
the latch locks the leg - more
expensive, but much stronger.
We don't cut corners and neither
should you.
Each leg section is press-fit
into the upper leg housing and
then permanently secured by 4
TIG welds
SOLID STEEL LATCHES The locking latches are wire-EDM cut
from solid blocks of 4140 chromemoly steel. Our latches are unmatched for strength and precision.
SUPERIOR DIE CASTINGS Aluminum alloy parts are
die-cast of AL14130 using
pressures upwards of 30,000
PSI. This ensures parts that
are essentially porosity-free
yet lightweight.
NYLON 66 Reinforced Nylon 66 is extremely tough,
able to withstand temperatures ranging
from -13° F (- 25° C) to 302° F (140° C).
Reinforced fibers mean parts that are nearly
impossible to break.
All Versa-Pod products are covered by our Limited Lifetime Warranty against defects in materials and
workmanship. See packaging for warranty detail
2
www.versa-pod.com
Keng's Firearms Specialty, Inc. © 2012
INNOVATION means new features never before offered on one bipod
TILT AND PAN CONTROL
All Versa-Pod® bipods have built-in tilt and pan movements
- essential for making shots on real-world targets under
actual conditions. The all-new 50-Series Versa-Pod® bipods
have an additional friction lock feature (patent pending) that
enables the user to limit the amount of tilt/pan movement
desired, or to lock down the movements altogether.
AXIAL ROTATION (CANT) CONTROL
The ability to quickly correct for uneven ground is crucial
for making a first-shot hit - yet most bipods don't offer this
important feature. All Versa-Pod® bipods have built-in cant
correction. The all-new 50-Series Versa-Pod® bipods feature
a new friction lock mechanism (patent pending) operated by
the shooter's non-shooting hand, so it's now possible to limit
the degree of cant rotation, or to lock it down completely.
SPRING-POWERED LEGS
When you're in the prone or sitting
position, raising your rifle even an inch
SET-UP ON ANY SURFACE, INSTANTLY
or two is often difficult. Some bipods make
All Versa-Pod® bipods have built-in cant correction, coupled
this task even harder by making the shooter
with one-touch operation leg latches for extremely fast shot
pull out the legs against spring tension. The
set-up on just about any surface, under any conditions.
all-new Versa-Pod® 50-Series bipods all come
with spring-powered legs that make it easier to
elevate your rifle when you are prone or sitting.
Keng's Firearms Specialty, Inc. © 2012
www.versa-pod.com
3
Versa-Pod® 50-Series Bipods with Friction Lock Controls
Prone Models
(150-100)
Versa-Pod® Model 52 Bipod U.S.Pat.No.7,631,455 Elevates centerline of bore from 9 inches fully retracted
to 12 inches fully extended. Weight: 1.28 lbs (0.54 Kg) /
Standard Prone Bipod with Pan/Tilt and Cant
1.68 lbs (0.76 Kg) with Universal Mounting Adapter
Friction Lock Model 150-052
The classic prone-length Versa-Pod®, now with added friction lock control for the tilt/pan and cant rotation. Now you
can use the built-in movements to follow targets in motion or tighten down for sighting in at the range all with the
same bipod. Also featuring spring-powered legs for quicker, easier adjustments. Adjusts from 9 inches to 12 inches in
six increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).
(150-100)
Versa-Pod® Model 51 Bipod U.S.Pat.No.7,631,455 Elevates centerline of bore from 7 inches fully retracted
to 9 inches fully extended.
Weight: 1.18 lbs (0.54 Kg) /
Short Prone Bipod with Pan/Tilt and Cant
1.58 lbs (0.72 Kg) with Universal Mounting Adapter
Friction Lock Model 150-051
A never-before offered short prone bipod from Versa-Pod®. For shooters who prefer to be a little lower to the ground
when shooting from the prone position. Also the ideal length when shooting from a bench or the hood of a vehicle.
Same friction lock controls and spring-powered legs as 150-052. Adjusts from 7 inches to 9 inches in five increments.
Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).
(150-100)
Versa-Pod® Model 50 Bipod U.S.Pat.No.7,631,455
Super Short Prone Bipod with Pan/Tilt and Cant
Friction Lock Model 150-050
Elevates centerline of bore from 5 inches fully retracted
to 7 inches fully extended. Weight: 1.10 lbs (0.5 Kg) /
1.50 lbs (0.68 Kg) with Universal Mounting Adapter
The specialist's bipod - one of shortest bipods on the market. Developed at the request of professional snipers who
need to be as close to the ground as possible. Extremely quick to use and easy to carry, yet utilizing the same rugged
construction as all Versa-Pod bipods. Same friction lock controls and spring-powered legs as 150-052. Adjusts from 5
inches to 7 inches in three increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).
4
www.versa-pod.com
Keng's Firearms Specialty, Inc. © 2012
Versa-Pod® 50-Series Bipods with Friction Lock Controls
Sitting Models
(150-100)
Versa-Pod® Model 53 U.S.Pat.No.7,631,455
Standard Sitting Position Bipod with Pan/Tilt
and Cant Friction Lock Model 150-053
Elevates centerline of bore from 15 1/2 inches fully
retracted to 23 3/4 inches fully extended
Weight: 1.58 lbs (0.72 Kg) / 1.96 lbs (0.89 Kg) with
Universal Mounting Adapter
Like the Model 3 in every way, but with newly added friction lock controls for the tilt/pan movement and axial rotation. Both controls are operated by the off hand, so there is no interference with the actual firing of the rifle. Springpowered legs need only 1/3 the amount of time that traditional gravity pull legs to deploy to proper height. Adjusts
from 15 1/2 inches to 23 3/4 inches in twelve increments. Non-marring rubber feet. Includes one Universal Mounting
Adapter (150-100)
(150-100)
Versa-Pod® Model 54 U.S.Pat.No.7,631,455
Extended Length Sitting Position Bipod with
Pan/Tilt and Cant Friction Lock Model 150-054
Elevates centerline of bore from 20 inches fully
retracted to 31 inches fully extended
Weight: 2.0 lbs (0.91 Kg) / 2.38 lbs (1.08 Kg) with
Universal Mounting Adapter
Another never-before offered length from Versa-Pod®. A bipod for use while sitting in a folding chair or hunting stool.
Has the same friction lock controls for the tilt/pan movement and axial rotation as other 50-Series bipods.
Spring-powered legs take less than a second to deploy to their maximum length. Adjusts from 20 inches to 31 inches
in sixteen increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).
Keng's Firearms Specialty, Inc. © 2012
www.versa-pod.com
5
Classic Versa-Pod® Models
(150-100)
Elevates centerline of
bore from 9 inches fully
retracted to 12 inches
fully extended
Versa-Pod® Model 2 Bipod
Standard Prone Bipod / Non-Marring Rubber Feet
Model 150-002 Steel/Aluminum Alloy Weight: 1.04 lbs (0.47 Kg) / 1.44 lbs (0.65 Kg) with Universal Mounting Adapter
Model 160-002 All-Steel Construction Weight: 1.48 lbs (0.68 Kg) / 1.90 lbs (0.86 Kg) with Universal Mounting Adapter
The foundation of the Versa-Pod® line since its introduction in 1995. Has built-in pan and tilt movements to enable
tracking of targets moving simultaneously in two planes. Also has built-in axial rotation for quick corrections on
uneven ground. One-touch operation to extend legs, adjusts from 9 inches to 12 inches in six increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).
Elevates centerline
of bore from 9 inches
fully retracted to 12
inches fully extended
(150-100)
Versa-Pod® Model 150-001
bipod shown on Colt® AR-15®
Model SP1 Rifle with optonal 150-101 adapter
Versa-Pod® Model 1 Bipod
Standard Prone Bipod / Ridged Metal Feet
Model 150-001 Steel/Aluminum Alloy Weight: 1.04 lbs (0.47 Kg) / 1.44 lbs (0.65 Kg) with Universal Mounting Adapter
Model 160-001 All-Steel Construction Weight: 1.58 lbs (0.72 Kg) / 2.0 lbs (0.91 Kg) with Universal Mounting Adapter
Same as Model 2 in all respects, except ridge metal feet work better in sand or on wet ground. Ideal for tactical rifles used
in non-urban environments. All-steel model (160-001) is recommended on rifles chambered for .300 Winchester Magnum
and larger. Adjusts from 9 inches to 12 inches in six increments. Includes one Universal Mounting Adapter (150-100).
(150-100)
Elevates centerline of
bore from 15 1/2 inches
fully retracted to 23 3/4
inches fully extended
Versa-Pod® Model 3 Bipod Standard Sitting
Position Bipod / Non Marring Rubber Feet
Model 150-003 Weight: 1.40 lbs (0.64 Kg) / 1.80 lbs (0.82 Kg) with Universal Mounting Adapter
The classic sitting position bipod. One of the best-selling sitting position bipods on the market today. The built-in pan
and tilt movements allow the shooter to track small game moving simultaneously in two planes. The axial rotation
feature allows for quick corrections when setting up on uneven ground - no need to fiddle with the length of each leg.
One touch operation to extend legs into position. Adjusts from 15 1/2 inches to 23 3/4 inches in twelve increments.
Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).
6
www.versa-pod.com
Keng's Firearms Specialty, Inc. © 2012
PRONE POSITION BIPODS / SPECIAL MODELS
Versa-Pod® Model 2 with UIT Rail Adapter
Model 150-032
Versa-Pod® Model 2 supplied with UIT Rail Adapter (150-601)
Weight: 1.48 lbs (0.67 Kg) All other specifications same as 150-002.
Versa-Pod® Model 1 with UIT Rail Adapter
Model 150-031
Versa-Pod® Model 1 supplied with UIT Rail Adapter (150-601)
Weight: 1.48 lbs (0.67 Kg)
All other specifications same as 150-001
Versa-Pod® Model 2 with M16A2 Handguard Adapter
Model 150-013
Versa-Pod® Model 2 supplied with M16A2
Handguard Adapter (150-116)
Weight: 1.48 lbs (0.67 Kg)
All other specifications same as 150-002
(150-200)
Versa-Pod® Model 20 Bipod / Tactical Model
Short Prone Bipod / Ridged Metal Feet / Spring-Powered Legs
Model 150-020 Steel/Aluminum Alloy Construction
Weight: 1.0 lb (0.46 Kg) / 1.40 lbs (0.64 Kg) with Universal Mounting Adapter
Shorter than the Model 1 Bipod, adjusts from 7 inches to 9 inches in four increments. Addition of internal springs makes deployment of the legs much faster than
gravity pull on standard bipods. Also makes height adjustments much easier when
in prone position. Includes one Universal Mounting Adapter (150-200)
Elevates centerline of bore
from 7 inches fully retracted
to 9 inches fully extended
(150-200)
Versa-Pod® Model 49 Bipod Patent Pending
Super Short Prone Bipod with Pan/Tilt and Cant Friction Lock,
Tactical Model
Model 150-049
Weight: 1.10 lbs (0.5 Kg) / 1.56 lbs (0.71 Kg) with Universal Mounting Adapter.
A tactical version of our super-short Model 50 bipod. Developed at the request of professional snipers who need to keep as close to the ground as possible. New 50-series
head offers full friction lock control of pan, tilt and axial rotation. Amazingly compact
and easy to carry, yet has all of the features and rugged construction of our standardlength bipods. The rugged ridged aluminum foot is die-cast around the bipod leg, with
concentric grooves designed to “grip” the foot onto the leg, making it almost impossible to break off. Suitable for a wide variety of terrain under all conditions.
Adjusts from 5 inches to 7 inches in three increments. Includes one
Tactical Universal Mounting Adapter (150-200)
Keng's Firearms Specialty, Inc. © 2012
www.versa-pod.com
7
MOUNTING ADAPTERS
Versa-Pod® adapters are designed to look and feel like they are an
The Versa-Pod® system has many adapters that enhance the
utility of your bipod. All adapters are designed to be easy-to-install
and do not require any modification to the basic firearm.
original part of your rifle, not an add-on. The same superior materials and attention to detail goes into each adapter as on our bipods.
Universal Mounting Adapter
Model 150-100
Weight: 0.38 lbs. (0.17 kgs)
Fits all standard rifle stocks fitted
with Uncle Mike's®-type Q.D. sling
stud. A freely-rotating Q.D. stud is
mounted on the bottom of knurled
nut for sling mounting
Universal Mounting Adapter,
Tactical Model
Model 150-200
Installs in seconds without tools. No
modifications to stock necessary.
Weight: 0.44 lbs. (0.20 kgs)
Same as 150-100 except equipped
with push-button release 1 5/8"
sling loop for use with 1 1/4" and
1 1/2" slings.
UIT Rail Adapter
Model 150-601
Weight: 0.4 lbs. (0.20 kgs)
Fits rifles equipped with UIT rail
(also referred to as Anschutz® rail)
in forend. Common examples:
Steyr® SSG PII,
Savage® Model 12 VSS,
Blaser® R 93 LRS 2.
Freeland Rail Adapter
Model 150-602
Model 150-602AL
Weight: 0.45 lbs. (0.20 kgs)
Fits American-made rifles using
the Freeland™ pattern rail.
Common example: McMillan®
Fiberglass stocks.
Versa-Pod Freeland Tube Adaptor,
Special Dimensions for Armalite
Accessory 1 5/8" Sling Loop
Model 150-701
Model 150-711
Note: 150-601 adapter shown on stock
with factory-fitted UIT rail, 150-602
Freeland@ rail adapter installs in the
same manner but is not interchangeable
Weight: 0.06 lbs. (0.03 kgs)
Fits different brands of stocks
and other accessories equipped
with flush-cap mountings. Secure
push-button release.
Versa-Pod H.D. Push-Button Swivel
Stud for Embedding into Gunstock
Model 150-108
Weight: 0.26 lbs. (0.12 kgs)
4 1/2 inch length with concentric
grooves for epoxying into stock.
8
www.versa-pod.com
Keng's Firearms Specialty, Inc. ©2012
GUN-SPECIFIC ADAPTERS
Accuracy International® Adapter
Model 150-808
rear view
front view
Weight: 0.38 lbs. (0.17 kgs)
Fits all Accuracy International® rifles and
chassis-type stocks. Precisely engineered
for a flawless fit. Allows any bipod from the
Versa-Pod® system to be used, also compatible with Parker-Hale® bipods.
Clip-on Adapter for M16A1/A2 Bayonet Lug
Model 150-101
150-101 Adapter shown on
Colt® AR-15® Model SP1
Weight: 0.18 lbs. (0.08 kgs)
Fits all M16-type rifles with bayonet lug.
Attaches in place of M7 or M9 bayonet. Will
also fit other rifles that use the standard M16
bayonet like the Ruger® Mini-14 GB
150-101 Adapter shown on
Ruger® Mini-14 GB Model
Springfield Armory® M1A Adapter
Model 150-807B
Versa-Pod Bottom-Mounted MIL-STD-1913
Accessory Rail for Springfield M1A SOCOM
150-807B
Ruger® Mini-14® Adapter
Model 150-103
150-103 Adapter shown mounted
on Ruger® Mini-14
Weight: 0.20 lbs. (0.17 kgs)
Fits Ruger® Mini-14® (not GB Model) and
Mini-30® rifles. Longer 8-36 hex head screws
(included) replace the two rearmost gas block
screws.
Heckler & Koch® Model 91/93 Adapter
Model 150-105
Weight: 0.24 lbs. (0.09 kgs)
Fits the factory-supplied wide forend with
bipod attachment slot on Heckler & Koch®
Models 91 and 93. Will not fit slimline
G3-type forends.
150-105 Adapter shown mounted
on Heckler & Koch® Model 93
Remington® 870 Adapter
Model 150-106
Weight: 0.30 lbs. (0.14 kgs)
Replaces the magazine cap on tubular
magazine of Remington® Model 870 and
Model 1100 shotguns. Note: should not be
used in conjunction with extended magazines.
M16A2 Handguard Adapter
Model 150-116
150-116 Adapter shown mounted
on Colt® AR-15A2® Sporter II
Keng's Firearms Specialty, Inc. © 2012
Weight: 0.44 lbs. (0.20 kgs)
Fits the A2-style lower handguard through
rearmost ventilation hole. Will not damage
heat shield. Note: will not work with M4-spec
handguards with double heat shields.
www.versa-pod.com
9
PICATINNY RAIL ADAPTERS
All Versa-Pod Picatinny rail adapters are designed specifically to fit the U.S. Military's
MIL-STD-1913 pattern rail. The steel dovetail blocks are wire-EDM cut for a precise fit.
Model 150-618
Standard Version
Weight: 0.88 lbs. (0.40 kgs)
New, reduced-size vertical foregrip adapter
for the RAS forend-equipped M4 carbine and
other weapons equipped with MIL-STD-1913
rail forends. Standard 6.3mm stud allows for
full range of axial rotation on all Versa-Pod
bipods. New feature: embedded flush-caps
on both sides provide additional attachment
points for slings. Made of PA66 material, which
is heat-resistant to more than 300° F and is
super-tough (30% glass fiber reinforced)
Model 150-658
Limited Axial Rotation Version
Weight: 0.88 lbs. (0.40 kgs)
Like 150-618 adapter, but with larger
9.4mm stud that eliminates the axial
rotation feature on all Versa-Pods.
Also features embedded flush-caps
on both sides. Made of PA66 material, which is heat-resistant to more
than 300° F and is super-tough (30%
glass fiber reinforced)
Model 150-698
Vertical Foregrip Only
Weight: 0.82 lbs. (0.37 kgs)
By popular demand, uses the same
sturdy attachment mechanism as on
our 150-618 and 150-658 adapters,
but without the Versa-Pod bipod spigot.
Features embedded flush-caps on both
sides. Made of PA66 material, which is
heat-resistant to more than 300° F and is
super-tough (30% glass fiber reinforced)
MIL-STD-1913 (Picatinny) Rail Adapter,
Handrest Type
Model 150-603 Weight: 0.54 lbs. (0.24 kgs)
A smaller adapter for those who don't need a
full vertical foregrip. New feature: embedded
flush-caps on both sides to provide additional
attachment points for slings.
MIL-STD-1913 (Picatinny) Rail Adapter, Clip-On Type
Model 150-611
Model 150-612 Non-Canting
Weight: 0.30 lbs. (0.14 kgs)
Even more compact than the 150-603, totally eliminates the Nylon 66 hardware. Tightens onto Picatinny
rail using 1/2" hex head nut. Nut is non-removable to
prevent loss.
Dovetail block slides onto standard MILSTD-1913 rail and is retained with solid
steel square pin. No tools required for
installation or removal. Can be easily
re-positioned anywhere along the length
of rail.
Free Float Tube Adapter
Model 150-630
Weight: 0.45 lbs.
Fits all 2” diameter free float tubes
with a quick detach sling swivel stud.
Common examples: Bushmaster
and DPMS
10
www.versa-pod.com
Keng's Firearms Specialty, Inc. © 2012
PICATINNY RAIL BIPODS
Versa-Pod® Model 2 with MIL-STD-1913
Rail Adapter
Model 150-462
Versa-Pod® Model 2 supplied with MIL-STD-1913
(Picatinny)
Rail Adapter (150-603)
Weight: 1.5 lbs (0.68 Kg) All other specifications
same as 150-002
Versa-Pod® Model 2 with MIL-STD-1913
Rail Vertical Grip Adapter
Model 150-480
Versa-Pod® Model 2 supplied with MIL-STD-1913
(Picatinny)
Rail Vertical Grip Adapter (150-616)
Weight: 1.9 lbs (0.86 Kg) All other specifications
same as 150-002
Lightweight Picatinny Rail Bipod with
Raptor Feet
Model 150-923
Model 150-924 9” - 12”
Weight: 1.02 lbs. (0.46 kgs) Elevates
centerline of bore from 7 inches fully
retracted to 9 inches fully extended.
Exactly like the RD-923 bipod that
we supplied to the U.S. military,
except that the legs on this version are not springpowered. Raptor feet function superbly under all
types of conditions and in different terrain.
Heavy-Duty Picatinny Rail Bipod with Raptor
Feet Restricted Military Sales Only
Model 180-MZ-091
Weight: 1.96 lbs. (0.89 kgs) Elevates
centerline of bore from 9 inches fully
retracted to 12 inches fully extended.
Designed for full-time use on the RAS
forend equipped M249 SAW. All steel
construction. Non quick-detachable
mechanism. Attaches to MIL-STD1913 rail with two 10-32 machine
screws. Spring-loaded legs. Large knurled tensioning knob to control tilt and pan movements.
Forward-Mounted MIL-STD-1913
(Picatinny) Rail for M14/M1A®
Versa-Pod® 150-923 bipod shown
mounted on Springfield Armory®
M1A® with 150-807 rail installed
Model 150-807
Keng's Firearms Specialty, Inc. © 2012
Lightweight Picatinny Rail Bipod with Rubber Feet
Model 150-925
Weight: 0.98 lbs. (0.45 kgs) Elevates centerline of bore from 7 inches fully retracted to 9
inches fully extended. Same as the 150-923
bipod, except with non-skid, no-marring
rubber feet. Spring-powered legs.
Model 150-926, 9”-12”
Heavy-Duty Picatinny Rail Bipod with Rubber Feet
Model 180-MZ-251
Weight:1.46 lbs. (0.66 kgs) Elevates centerline of bore from 7 inches fully retracted
to 9 inches fully extended. Same as the
180-MZ-091 bipod except with non-skid,
no-marring rubber feet. Spring-powered
legs. Large knurled tensioning knob to
control tilt and pan movements.
Large, easy-to-use knurled knob
allows for total control of pan and
tilt movements with off hand.
Versa-Pod® Model 51 bipod shown mounted on
Springfield Armory® M1A® using 150-603 Adapter with
150-807 rail. 150-611 adapter can also be used
www.versa-pod.com
11
Versa-Pod
®
Versa-Pod® BattlePack LTD for Accuracy International Rifles
Model 150-683, 7”-9”
Model 150-684, 9”-12”
The BattlePack LTD For AI Rifles – At the range, on patrol, or in
the mud, with just a few simple turns change your legs to suit
whatever terrain you find yourself in! Molle pouch will easily
integrate into your existing configuration and is built tough – go
ahead and abuse it! This unit is avaiable in 7”-9” and 9”-12”.
Versa-Pod® BattlePack LTD
Model 150-519, 7”-9”
Model 150-529, 9”-12”
The BattlePack LTD Small – This new configuration enhances
all the things that make a Versa-Pod great. Tighter tolerances
mean less movement resulting in greater accuracy. At the
range, on patrol, or in the mud, with just a few simple turns
change your legs to suit whatever terrain you find yourself in!
This unit is available in 7”-9” and 9”-12”.
OEM INQUIRIES WELCOME
We are suppliers of high-quality bipods
to various military forces, government
agencies and companies throughout
the gun industry. Contact us with your
requirements and we will work with
you to design and build the perfect
bipod for your company's needs.
Versa-Pod
®
Versa-Pod® Model 150-052 bipod
shown on Rock River Arms® DEA
Carbine with 150-603 adapter.
is manufactured by:
Keng's Firearms Specialty, Inc.
875 Wharton Drive, SW
P.O. Box 44405
Atlanta, GA 30336-1405
U.S.A.
Tel. (404) 691-7611
FAX (404) 505-8445
E-mail: [email protected]
www.versa-pod.com
Versa-Pod and the Versa-Pod logo are registered trademarks of Keng's Firearms Specialty, Inc. All other trademarks used in this catalog belong to their respective owners.
Specifications and availability are subject to change without prior notice. Not responsible for typographical errors.
Versa-Pod products are manufactured under one or more of the following U.S. patents: 5,711,103 5,815,974 Other patents pending
Printed in U.S.A.