vertical blinds - Blinds Express

VERTICAL BLINDS
Price List and Product Information Guide
April 2011
Effective April 2011
PRODUCT OVERVIEW
PRODUCT OVERVIEW:
• Durable vinyl louvers offer superior light control and are
easy to clean
• Fabric louvers are available as free hang or inserted into
channel panel
• Aluminum Super-Vue® headrail with pantograph spacing
system
raber, a leading brand for
• Valance options and wood cornices top the look for a
more finished appearance
decades,
• Many styles coordinate with Graber 2" Designer Vinyl
horizontal blinds
has given design professionals
the resources to define what window
fashion is today – the confident
expression of personal style.
From custom quality horizontal and
vertical blinds, to soft fabric shades
to the decorative hardware that
frames your window with artistic style,
the Graber brand offers everything
you need to create classic designs.
Depend on Graber for a look
that’s timeless.
2
Effective April 2011
TABLE OF CONTENTS
Product Overview....................................................................................................................................................................... 2
How to Place an Order............................................................................................................................................................... 4
Measuring Information............................................................................................................................................................... 5
Size Considerations, Manufacturing Deductions, Mounting Considerations............................................................................ 6
Price Chart Index and Louver Information................................................................................................................................. 7
PRICING
Price Group A: VINYL: Crown.................................................................................................................................................. 8
Price Group B: VINYL: Stowe, 31/2" Channel Panel.................................................................................................................. 9
Price Group C: VINYL: Cachet, Decatur Sculptured, Homespun II, Quantum...................................................................... 10
INYL: Georgetown, Prairie, Rapture, Satin Stripe
Price Group D: V
FABRIC: Brighton, Grasses............................................................................................................................ 11
Price Group E: VINYL:
Haiti, Masterclass, Nueva
FABRIC: Strings, Tahiti Weave....................................................................................................................... 12
Price Group F: V
INYL: Driftwood, Embassy, Safari
FABRIC: Malaga, Stratus................................................................................................................................. 13
Price Group G: FABRIC: London, London Tweed, Tango...................................................................................................... 14
OPTIONS AND FEATURES
Cut-Outs, Connecting Louver Chains, Bottom Chain and Clip, Mixed Louvers,
Stacking Options, Vinyl S-shape Louvers and Projection Brackets.................................................................................... 15
Angled Windows and Paired or Butted Blinds........................................................................................................................ 16
Bay or Corner Windows........................................................................................................................................................... 17
Curved Headrails...................................................................................................................................................................... 18
Valances.................................................................................................................................................................................... 19
One Touch® Control................................................................................................................................................................. 20
Super-Vue® Headrail and Replacement Pricing....................................................................................................................... 21
GENERAL INFORMATION
3½" Louver Stacking Chart...................................................................................................................................................... 22
3½" Louver Stacking Chart For One Touch Control . ............................................................................................................. 22
Warranty Information and Cleaning Instructions...................................................................................................................... 23
3
Effective April 2011
HOW TO PLACE AN ORDER
1. QUANTITY of blinds
2. SIZE OF BLINDS: WIDTH first, then HEIGHT.
See page 5 for Measuring Information.
3.
INSIDE OR OUTSIDE MOUNT:
For inside window frame installation,
mark order “Inside Mount”. For outside
window frame installation, mark order “Outside Mount”.
INSIDE MOUNT
4a. CONTROL LOCATIONS:
Indicate whether control should be located
on the left or right side of the blind (right is standard).
4b. One Touch® Control System available, see page 20.
5.
BLIND STYLE:
When placing your order, specify:
• Style of PVC or fabric
• Color number
• Free hang or channel panel insert
• Valance type
6.
•
•
•
•
•
•
•
•
OPTIONS (pages 15-18):
Cut-outs
Angle windows
Butted blinds
Corner windows
Mixed louvers
Bay windows
Curved headrail
Stacking options
7. DELIVERY:
Indicate sold to address.
TO PRICE YOUR ORDER:
1. Select blind type, size, color and options.
2. Add together the base price for the blind and options to determine total price of the blind.
ORDERING CHECKLIST:
Remember these important details when placing an order to avoid problems later:
• Specify inside or outside mount
• Recheck the color name and number
• Recheck the width and height measurement requirements
• Confirm product type
• Confirm purchase order number or reorder number is included
• Verify order completion with Store Associate
4
OUTSIDE MOUNT
Effective April 2011
MEASURING INFORMATION
HOW TO MEASURE
Measure each window individually as
size variances are common. Record
width first, then height to the nearest
1
⁄8". Measure width from left to right,
height from top to bottom using a
steel tape measure.
⁄4 1⁄2 3⁄4
⁄8 3⁄8 5⁄8 7⁄8
1
1
Do not use a cloth tape.
Inside Mount
Inside mount blinds are installed inside the
window casing or door, or wall to wall in a room.
The window casing must be at least 3" deep for
flush track mount or 33⁄4" deep for flush louver
mount. Otherwise, an angle bracket may be
necessary.
(Minimum recessed space = 23⁄8").
3"
1.Measure the exact inside width of window
casing from one inside edge to the other in
three different places. Record the narrowest
measurement.
2. Measure the exact height in three different
places from top edge of opening to top of
sill. Record the shortest measurement.
3. Measure the window diagonally in two places
as shown. If the two diagonal dimensions are
not equal, we recommend an outside mount
application for optimal shade function and
aesthetics.
4. Do not take deductions. Allowances are
made at the factory to ensure a perfect fit.
Outside Mount
Outside mount blinds are installed outside the
window casing, covering an area larger than the
window itself.
1. Measure the exact width of window, including
the frame if there is one. Add 3" for each side
(6" total overlap) to ensure light control and
privacy.
2. Measure the exact height of window from
top edge of molding to bottom edge, or to
top of sill if there is one. Add 3" to allow for
adequate mounting area above the window.
3. If blind extends to the floor (i.e., to cover
patio door) measure the exact height of
window from top edge of molding to the floor
and add 21/2" to allow for adequate mounting
area above the window. This will give room
for 1/2" clearance so the louvers do not touch
the floor.
4. T
he factory makes NO allowances on outside
mount.
NOTE: To have the entire window uncovered
when blinds are fully open, see below section.
HOW TO MEASURE FOR UNCOVERED WINDOW
(F.B.W.)
1. D
etermine the clear opening width for one-way stack or
split stack (See diagrams) - the additional 3" shown for
privacy is recommended if ordering one-way stack.
Clear Opening
(C.O.)
2. M
atch the clear opening width with dimension found under
“C.O.” COLUMN on page 22. For even spacing, round up
width measurement to the next size in the stack chart. Split
stack will have even numbers of louvers.
3. O
rder the corresponding dimension found in the “F.B.W.”
(Finished Blind Width) column on page 22.
One Way Stack
Finished Blind Width
(F.B.W.)
(F.B.W.)
Example: One-Way Stack
If determined width for clear opening window view is 521⁄4",
order width needed to provide full unobstructed view is 663⁄4".
Clear Opening
(C.O.)
5
Split Stack
(recommended for
balanced appearance)
Finished Blind Width
(F.B.W.)
Effective April 2011
PRODUCT INFORMATION
SIZE CONSIDERATIONS SUPER-VUE® (G-71) HEADRAIL
Cord/Chain Control
One Touch® Wand Control
9"
191"
12"
144"
9"
1443⁄8"
12"
96"
Minimum Width
Maximum Width
Minimum Height
Maximum Height
Minimum Depth for Inside Mount
Minimum Depth for Headrail Flush Mount
Minimum Depth for Louver Flush Mount
Maximum Overall Blind Area
3"
33⁄4"
23⁄8"
3"
33⁄4"
10,080 sq. in
N/A
Headrail
Flush
Mount
Louver
Flush
Mount
MANUFACTURING DEDUCTIONS
1. INSIDE MOUNT – CEILING OR TOP OF WINDOW FRAME
(STANDARD)
A 5⁄8" manufacturing height
deduction is taken for blinds
being installed as inside,
ceiling mount without a
valance. An additional
1⁄8" manufacturing height
deduction is taken if a
valance is included.
3. O
UTSIDE MOUNT – WALL OR BACK (STANDARD)
No manufacturing height deduction is taken.
2. INSIDE MOUNT – WALL OR BACK OF WINDOW FRAME
A 1" manufacturing height deduction is taken for blinds
being installed as inside mount using the L-bracket for
a wall mount. An additional 1⁄8" manufacturing height
deduction is taken if a valance is included, to accommodate
the height of the valance clip.
4. O
UTSIDE MOUNT – CEILING OR TOP (OPTION)
No manufacturing height deduction taken.
SPECIAL MOUNTING CONSIDERATIONS
WALL-TO-WALL BLINDS: If blind width extends wall-to-wall in
a room.
1. Follow measuring instructions for Inside Mount.
2. If blind is to be mounted to ceiling, specify track clips. If
blind is to be mounted to wall, specify angle brackets.
CEILING MOUNT: For blinds mounted to ceiling.
1. If blind width extends from wall-to-wall, mark order “INSIDE
MOUNT". Follow measuring instructions for Wall-to-Wall
Blinds.
2. If blind width does not extend wall-to-wall, mark order
“OUTSIDE MOUNT". Follow measuring instructions for
Outside Mount.
3. Specify track clips on order.
SPECIAL NOTE – When blind is drawn fully open and
consumer wants all of the window to be uncovered, total
overlap may need to be more than 6".
6
Effective April 2011
PRICE CHART INDEX AND LOUVER INFORMATION
FABRIC LOUVERS 3½"
Fabric Name
Louver Style
Fabric Content
Privacy Level
Price Chart
Page
FH/INS
100% Polyester
LF
D
11
Grasses
FH/INS/N
88% Polyester/7% Cotton/5% Flax
LF
D
11
London
FH/INS/N
100% Polyester
LF
G
14
London Tweed
FH/INS/N
100% Polyester
LF
G
14
Malaga
FH/INS/N
100% Polyester
LF
F
13
Stratus (FR)
FH/INS
37% Fiberglass / 63% Vinyl on Fiberglass
LF
F
13
Strings
FH
100% Rayon
LF
E
12
Tahiti Weave
FH/INS/N
50% Polyester / 50% Polypropylene
LF
E
12
Tango
FH/INS/N
100% Polyester
LF
G
14
Brighton (FR)
‡
VINYL LOUVER 3½"
Vinyl Name
Louver Style
Privacy Level
Price Chart
Page
Cachet* (FR)
N
RD
C
10
Crown* (FR)
N
RD
A
8
Decatur Sculptured* (FR)
N
RD
C
10
Driftwood (FR)
N
RD
F
13
Embassy (FR)
N
RD
F
13
Georgetown (FR)
N
RD
D
11
Haiti (FR)
N
RD
E
12
Homespun II* (FR)
N
RD
C
10
Masterclass (FR)
N
RD
E
12
Nueva* (FR)
N
RD
E
12
Prairie (FR)
N
RD
D
11
Quantum* (FR)
N
RD
C
10
Rapture* (FR)
N
RD
D
11
Safari* (FR)
N
RD
F
13
Satin Stripe (FR)
N
RD
D
11
Stowe* (FR)
N
RD
B
9
FR=Fire Retardent
FH=Free-Hang
INS=Channel Panel Insert
N=Neutral to streetside
RD=Room Darkening
LF=Light Filtering
‡=Available in coordinating
FashionPleat® and EvenPleat®
pleated shades
*=Available in coordinating 2"
Designer Vinyl horizontal blinds
LOUVERS
Embossed Vinyl Verticals
Fabric Vertical Blinds
echnology has changed the face of Graber vinyl
T
verticals so dramatically you would think they were
made of fabric.
Fabric louvers come with sewn-in bottom
weights in free-hanging louvers and optional
chains and clips.
Whatever the style, all embossed vinyl affords value,
durability, easy cleaning and superior light control.
To increase privacy and room darkening, fabric
louvers can be inserted into Channel Panels.
The crystal clear edge channels are nearly
invisible, yet hold fabric securely and will not
yellow over time. The opaque vinyl louvers
provide complete privacy.
Coordinating 2" Designer Vinyl Horizontals
raber offers an array of styles in 2" Designer Vinyl
G
horizontal blinds, which coordinate beautifully with
many vinyl vertical styles. For pricing, see the Graber
2" Designer Vinyl Horizontal Price List and Product
Information Guide.
Due to the nature of louver materials
(both fabric and vinyl prints), colors may
vary slightly from dye lot to dye lot. Exact
matches cannot be guaranteed.
7
VANE MATERIAL
INSERTED IN
GROOVER
LOUVER MATERIAL
INSERTED IN
CHANNEL PANEL
Effective April 2011
OPTIONS AND PRICING
CUT-OUTS
MIXED LOUVERS
•
•
•
•
No charge
Available only on free-hang blinds
Blind must stack away from cut-out area
Specify size and base price by maximum width and height of
blind; then order as shown below
• Mail or fax drawing to identify size and location of cut-out
(see example) to the attention of the Specialty Department
(see page 23 for address)
• Minimum cut-out width 3½"
For mixed colors of same
louver material, add 10% to
base price. For mixed louver
materials, add 10% to base
price of highest price group.
Must indicate valance color.
CUT-OUTS
STACK
CUT-OUT
5"
8"
STACKING AND CONTROL LOCATION OPTIONS
• Blinds are standard with same side stack and controls
• Stacking options, standard control locations are as follows:
a. Center/uneven stack
Right controls
b. One-way draw, stack right
Right controls
c. One-way draw, stack left
Left controls
d. Opposite stack and control Left stack/Right control
• Non-standard control location must be noted
CONNECTING LOUVER CHAINS – VINYL LOUVERS
• No charge
•C
onnecting louver chain available on some vinyl blind styles
(not available with S-shape louvers)
Same Side Stack
and Controls
Opposite Stack
and Controls
Right Controls
Reversible
Standard
Left Controls
Reversible
•S
ingle nickel-plated chain runs through center of the louvers
at the bottom of the blind
Split Stack
Right Controls
BOTTOM CHAIN
Split Stack
Left Controls
Chain and traversing cord must be at the same end of the track.
BOTTOM CHAIN & CLIP – FABRIC LOUVERS
VINYL S-SHAPED LOUVERS
• No charge
• S-shaped louvers are NOT reversible
•C
onnecting chain and clips available for free-hang fabric
louvers
•O
n Right Stack and Split Stack, the high side (or convex
side*) of the louver is to the right of the louver stem hole
•S
ingle nickel-plated chain with clips attached at back of
louvers at the bottom of the blind
•O
n Left Stack only, the high side (or convex side*) of the
louver is on the left side of the louver stem hole
• All free-hang fabric louvers have sewn-in bottom weights
*When viewed from the textured side of the louver
•B
ottom chains N/A with
inserted fabric louvers
PROJECTION BRACKETS
No Additional Charge
FREE HANG
FABRICS WITH
SEWN-IN WEIGHTS
43⁄8" projection brackets are available.
15
Effective April 2011
OPTIONS AND PRICING
ANGLED WINDOW BLIND
• A
DD 50% TO PRICE OF SLOPED WIDTH AND LONGEST
LOUVER LENGTH.
• Ideal for sloping, cathedral-type window types
• Only available in single stack cord control vertical blinds
• Louver stack and cord control must be at the highest point
of the window.
• Exact dimensions must accompany orders for angled blinds to
ensure proper fit.
• Steepest slope possible is 55°.
• Maximum size: 144" wide x 144" long, depending on angle.
• Minimum low end is 6".
• Square Corner valance only (must be mitred at time of
installation)
Angle
Width
Left
Side
Right
Side
Width
PAIRED BLINDS (BUTTED BLIND)
•P
rice as two separate blinds
• The appearance of a Split Stack blind can be achieved by
pairing blinds; the center opening point can be either on
center or off center
• Paired blinds can also be used when the required width is
larger than the maximum width available for a single blind
• Specify Paired Blinds (Butted Blinds) on your order
• Control locations must be same as stack
• Square Corner Valance with dust cover only
• Available with One-Way cord and chain only
PAIRED BLINDS
16
Effective April 2011
OPTIONS AND PRICING
MEASURING GUIDES
B
Three-Sided Bay Window
B. Width of the center window from corner to corner.
Angle A-B. Angle between windows (A) and (B).
Angle B-C. Angle between windows (B) and (C).
Measure bay angle using protractor or angle finder. Or use two
business cards in bay corner as illustrated and fax to customer
service.
B
B
A
A
Angle A-B
Angle B-C
FRONT VIEW
CEILING
Four-Sided Bay Window
Measure:
A & D. Width of side windows from the corners to the point you
would like the blind to cover.
B & C. Width of each window from corner to corner.
Angle A–B.
Angle between windows (A) and (B).
Ange B–C.
Angle between windows (B) and (C).
Angle C–D.
Angle between windows (C) and (D).
C
C
Measure:
A & C. Width of side windows from the corners to the point you
would like the blind to cover.
A
B
CEILING
D
C
ROOM WALL
ROOM WALL
Measure bay angle using protractor or angle finder. Or use two
business cards in bay corner as illustrated and fax to customer
service.
SIDE WALL
SIDE WALL
L
E
SID
L
WA
SID
EW
AL
L
ANGLE A-B
ANGLE B-C
ANGLE C-D
FRONT VIEW
Five-Sided Bay Window
Measure:
A & E. Width of side windows from the corners to the point you
would like the blind to cover.
B, C & D. Width of each center window from corner to corner.
Angle A–B.Angle between windows (A) and (B).
Ange B–C. Angle between windows (B) and (C).
Angle C–D.Angle between windows (C) and (D).
Angle D–E.Angle between windows (D) and (E).
CEILING
CEILING
A
B
ROOM WALL
L
E
D
SI
WA
SIDE
BACK WALL
SIDE W
ALL
SI
DE
AL
W
W
AL
L
ANGLE B-C
ANGLE A-B
17
E
ROOM WALL
LL
Measure bay angle using protractor or angle finder. Or use two
business cards in bay corner as illustrated and fax to customer
service.
D
C
ANGLE C-D
ANGLE D-E
Effective April 2011
OPTIONS AND PRICING
CURVED HEADRAIL SPECIFICATIONS
• Minimum width 48"; maximum width 168".
• See chart for feasibility.
• Not available with valances or cornices.
•H
eadrails with a depth greater than 9" have a crating surcharge, which is
already included in price of headrail
• Not available with One Touch® Control.
CURVED HEADRAIL BEND RADIUS CHART
50
80" RADIUS LINE
45
BEND RADIUS
CHART
40
"X" (INCHES) DEPTH
35
LE
IB
AS
FE AY
T
K
NO S O
US DIU
DI
A
RA D R
D
N
EN BE
30
25
20
B
15
10
140
130
120
110
100
90
80
70
60
5
50
Headrail cannot be bent to a radius tighter than 80".
To check your application for bend radius:
1. Determine preferred application - A, B, or C (below).
2. Measure “B” and “X” for your application (diagrams below).
3. On the Bend Radius Chart, draw a line up from your “B” dimension and over
from your “X” dimension.
4. If your two lines intersect below the 80" radius line, application is okay.
If lines intersect above the 80" radius line, application is not feasible.
5. Factory will make allowance for louver clearance.
6. If radius is less than 100", only split stack is available.
Note: D
epending on bend and finished blind width, separate tracks may
be recommended by factory.
"B" (INCHES) WIDTH
BEND RADIUS TO BE CALCULATED BY SPRINGS
CURVED HEADRAIL MEASURING GUIDE
See appropriate window drawing. To insure a proper fit, fax or mail a diagram with order
to the attention of the Specialty Department (see page 23 for address).
FACTORY WILL MAKE ALLOWANCE FOR LOUVER CLEARANCE.
Measurements should be taken from wall to wall or window to window.
STANDARD APPLICATION (A)
Measure exact window baseline (B) and depth (X). Factory will make deduction for louver
clearance. Diagram shows back corner of track sitting on the baseline.
OPTIONAL APPLICATION (B)
Measure exact window baseline (B) and depth (X). Indicate that front corners of headrail
should be flush with baseline. Factory will make appropriate deductions. Diagram shows front
corners of track sitting on the baseline. This application could leave light gaps at end of track
giving visibility to outside.
OPTIONAL APPLICATION (C)
Measure exact window baseline (B) and depth (X). Also indicate recessed wall measurement.
Factory will take deductions for louver clearance. Diagram shows track extending beyond the
baseline. This will help cover the side walls to eliminate and light gap.
CURVED HEADRAIL SURCHARGE (Add to retail price of blind)
SIZE
SURCHARGE
48"
63"
75"
85"
88"
100"
113"
120"
132"
144"
158"
168"
$126
181
208
231
239
266
294
310
336
364
390
417
18
Effective April 2011
OPTIONS – VALANCE INFORMATION
VALANCES
Valance Type
Charges and Details
Standard Valance
The standard valance is a lightweight Stay-Clear™ channel panel system
available in white and ivory with a closed corner and clear edge guaranteed
not to yellow. Valance includes a standard dust cover and 51⁄2" return. Inserts
may include all fabric and vinyl louvers in Crown profile (S-shaped louvers
use matching crown profile for valance insert).
The standard valance is included with the purchase of each blind. Standard
replacement valance available at single Horizon price, see price chart.
51⁄2" return
Horizon™ Valance
The Horizon valance system features the Stay-Clear channel panel with a sleek
rounded corner that accommodates vinyl and fabric louvers as inserts. Dust
cover is standard.
Only available as outside mount.
51⁄2" return
7P
5P
3P
1P
Double Horizon Valance
T
T
T
T
The same base system is used to create a Horizon double channel panel
valance with the ability to create a layered valance treatment. Dust cover is
standard.
Only available as outside mount.
51⁄2" return 45⁄8" return
7P
5P
3P
1P
T
T
T
T
ADDITIONAL INFORMATION – VALANCES
1. S-shaped vinyl louvers use matching crown profile for
valance insert.
Max Valance Widths
2. Hinged and spliced valances only available on standard
valance.
Standard
Horizon
with Ext Bracket
Double Horizon
with Ext Bracket
3. Customer must choose alternative top treatment for blind
orders beyond these maximum valance widths.
19
PVC
FABRIC
191"
178"
173"
175"
170"
191"
191"
191"
1893⁄4"
1893⁄4"
Effective April 2011
OPTIONS – ONE TOUCH® CONTROL INFORMATION
• No additional charge
• A slender wand controls louver rotation and traversing of
the blind
• Simple, convenient, safe (no cords and chains to get
tangled in)
• Recommended for homes with children or pets
• Available with one-way draw only; no center opening
Ordering Tips:
Blind Size Limitations:
Minimum Width – 9"
Maximum Width – 144"
Minimum Height – 12"*
Maximum Height – 96"
Maximum Overall Area – 10,080 sq. in.
*Minimum wand length is 33"
Wands for Blinds Mounted to Floor Level:
If the vertical blind is a patio door or if the bottom of the
vertical blind touches the floor, the following chart indicates
wand height:
Blind Height
Wand Height
77" or less*
33"
77 ⁄8" to 92"
48"
92 ⁄8" to 96"
60"
1
1
Wands for Blinds Mounted above Floor Level:
Keep in mind that the wand height is determined by
the finished blind height. If the headrail distance from
the floor is greater than 77" or if there is any furniture
in front of the blind, specify a 48" or 60" wand for easy
accessibility.
*If blind is less than 35", wand would be longer than louvers.
The standard cord and chain control is recommended.
Height
Standard 48" wand
Height
84"
48"
77"
Standard 33" wand
Width
Width
20
Effective April 2011
SUPER-VUE® HEADRAIL AND REPLACEMENT PRICING
E-Z Open™ Feature
• Allows for automatic rotation of the vertical louvers to the
open position when one pulls on the cord to traverse the
blind
• Minimizes “cord and chain confusion" by automatically
rotating louvers open before they are traversed to the
stacked position
• Prevents damage to stems and carriers and provides
easy one-step operation for opening the vertical blind
•N
ot available with cord tension pulley, One Touch®, center
stack or opposite stack
•F
ully-enclosed drive and flush end caps provide a secure
fit and clean, finished appearance
• Rack and pinion gear system allows louvers to rotate
smoothly and easily
• Centrally located carrier stems make the headrail reversible
for right or left installation; the clear nylon stems are nearly
invisible, yet extremely strong, and have low-friction wheels
that allow the blind to be opened and closed with ease
• Top-of-the-line quality, the anodized aluminum channel and
heavy-duty operating mechanism are backed by a limited
lifetime warranty
• Exceptionally smooth traverse action requires very little
draw force to open and close blind
• Galvanized steel end caps enclose headrail ends for a
secure fit and cleaner, more finished look
• Proportional louver spacing of the steel pantograph
traversing system keeps louvers evenly spaced whether the
blind is closed or partially open
• Symmetrical controls on rotation chain and traverse cord
allow easy operation and reversibility
G-71 SUPER-VUE
1 15/16"
1 3/8"
Super-Vue® Headrail only, no louvers
$
25"
38"
51"
63"
76"
85"
88"
101"
120"
145"
170"
178"
191"
35
51
67
84
100
113
118
133
161
193
227
234
255
NOTE: Minimum width 9" exact.
21
Effective April 2011
LOUVER STACKING CHARTS
3½" LOUVER STACKING CHART
NO. OF
LOUVERS
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
SINGLE STACK
SPLIT STACK
F.B.W. C.O. F.B.W. C.O.
101⁄8 67⁄8 131⁄4 91⁄2 121⁄2 71⁄4
3
1
16 ⁄8 12 ⁄8
195⁄8 147⁄8 183⁄4 121⁄2
223⁄4 171/2
257⁄8 201⁄8 251⁄8 177⁄8
29
223/4
321⁄8 253⁄8 313⁄8 231⁄4
353⁄8 281⁄8
381⁄2 303/4
373⁄4 281⁄2
5
3
41 ⁄8 33 ⁄8
443⁄4 361⁄8 44
343⁄4
477⁄8
383⁄4
51 413⁄8 501⁄4 391⁄8
541⁄4 44
573⁄8 465⁄8 565⁄8 441⁄2
601⁄2 493⁄8
635⁄8 52
627⁄8 493⁄4
3
5
66 ⁄4 54 ⁄8
70
573⁄8 691⁄8 55
F.B.W. = Finished Blind Width
TIP:
NO. OF
LOUVERS
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
SINGLE STACK
F.B.W. C.O.
731⁄8 60
761⁄4 625⁄8 3
79 ⁄8 651⁄4
821⁄2 677⁄8 853⁄4 705⁄8
7
88 ⁄8 731⁄4 92
757⁄8 951⁄8 785⁄8 981⁄4 811⁄4
1013⁄8 837⁄8 1045⁄8 861⁄2
1073⁄4 891⁄8 1107⁄8 913⁄4
114
941⁄2 1171⁄8 971⁄8 1203⁄8 993⁄4
1231⁄2 1023⁄8
1265⁄8 1051⁄8 1293⁄4 1073⁄4
1327⁄8 1103⁄8 SPLIT STACK
F.B.W. C.O.
751⁄2 603⁄8
813⁄4 653⁄4
88
71
943⁄8 761⁄4
1005⁄8 811⁄2
107
867⁄8
1131⁄4 921⁄8
1191⁄2 973⁄8
1257⁄8 1023⁄4
1321⁄8 1081⁄8
NO. OF
SINGLE STACK
LOUVERS F.B.W. C.O.
43
136 113
44
1391⁄4 1153⁄4
45
1423⁄8 1183⁄8 46
1451⁄2 121
47
1485⁄8 1235⁄8
48
1513⁄4 1263⁄8 49
155
129
50
1581⁄8 1315⁄8 51
1611⁄4 1341⁄4 52
1643⁄8 137
53
1671⁄2 1395⁄8
54
1705⁄8 1421⁄4 55
1737⁄8 1447⁄8
56
177
1475⁄8 57
1801⁄8 1501⁄4
58
1831⁄4 1527⁄8 59
1863⁄8 1551⁄2
60
1895⁄8 1581⁄4 61
191
1591⁄8
62
SPLIT STACK
F.B.W. C.O.
1383⁄8 1133⁄8
1443⁄4 1185⁄8
151
124
1571⁄4 1291⁄4
1635⁄8 1345⁄8
1697⁄8 1397⁄8
1761⁄4 1451⁄4
1821⁄2 1501⁄2
1883⁄4 1557⁄8
191
157
C.O. = Clear Opening
For even spacing on outside mounts, round
up width measurement to the next size in the
stack chart. Split stack blinds must have even
number of louvers.
3½" LOUVER STACKING CHART FOR ONE TOUCH® CONTROL
NO. OF LOUVERS 3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
SINGLE STACK
F.B.W.
C.O.
93⁄4
127⁄8
16
191⁄4
223⁄8
251⁄2
255⁄8
313⁄4
35
381⁄8
411⁄4
443⁄8
471⁄2
505⁄8
537⁄8
57
F.B.W. = Finished Blind Width
TIP:
61⁄8
83⁄4
111⁄2
141⁄8
163⁄4
191⁄2
221⁄8
243⁄4
273⁄8
30
323⁄4
353⁄8
38
405⁄8
433⁄8
46
NO. OF LOUVERS
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
SINGLE STACK
F.B.W.
C.O.
601⁄8
631⁄4
663⁄8
695⁄8
731⁄8
761⁄4
793⁄8
821⁄2
853⁄4
887⁄8
92
951⁄8
981⁄4
1013⁄8
1045⁄8
1073⁄4
485⁄8
513⁄8
54
565⁄8
595⁄8
621⁄4
65
675⁄8
701⁄4
73
755⁄8
781⁄4
807⁄8
831⁄2
861⁄4
887⁄8
NO. OF LOUVERS 35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
SINGLE STACK
F.B.W.
C.O.
1107⁄8
114
1171⁄8
1203⁄8
1231⁄2
1265⁄8
1293⁄4
1327⁄8
136
1391⁄4
1423⁄8
1451⁄2
1485⁄8
1513⁄4
155
156
911⁄2
941⁄8
963⁄4
991⁄2
1021⁄8
1043⁄4
1071⁄2
1101⁄8
1123⁄4
1153⁄8
118
1203⁄4
1233⁄8
126
1283⁄4
1291⁄4
Split Stack One Touch not available.
C.O. = Clear Opening
To determine stack use the formula
Stack = FBW – CO
22
Effective April 2011
WARRANTY INFORMATION
Type of Warranty
Limited Lifetime on:
•1⁄2", 1" and 2" Aluminum Horizontal Blinds, 2" headrail and
components, Wood, Faux Wood and Composite Blinds,
Vertical headrails, channel panels, valances, sheer fabric
and painted or stained cornices (unfinished cornices are
not warranted).
Three year on:
•2" vinyl slats, 2" acrylic slats, Vertical louvers (vinyl,
S-shaped and fabric).
What is Covered
This product is warranted against original defects in materials
or workmanship for as long as the original purchaser owns the
product provided that:
1. Poduct was properly installed in a residential dwelling;
2.Product was made or assembled exclusively from Springs
Window Fashions materials and components;
3. Springs Window Fashions recommendations were followed
with regard to limitations and specifications.
Who is Covered
This warranty extends only to you as the original purchaser of
the above stated product.
Obligations to the Consumer
The obligations of Springs Window Fashions are limited to
the repair or replacement of parts or products found to be
defective.
Springs Window Fashions is not responsible for shipping costs
or labor costs, for measuring and taking the product down or
for remeasuring or reinstalling the product.
If repairs are made under this warranty, the repairs will be
made with like or similar parts.
What the Warranty Does Not Cover
This warranty does not cover conditions or damages caused
by abuse, accidents, alterations, misuse or failure to follow
instructions for measurement, installation, use, cleaning or
maintenance. Normal wear and tear, including but not limited
to the items or occurrences below, is not covered by the
warranty.
• Unfinished cornices.
•When left for extended periods in direct sunlight, plastics
tend to yellow or crack.
•Some slight warpage, as well as natural variations in color
and grain, are normal with a wood product and are not
considered defects. Areas of high humidity may cause
excessive warpage of wood slats.
•Some loss of color intensity or discoloration may occur in
plastic materials or wood finishes when exposed to direct
sunlight over long periods of time.
•All fabrics can lose original intensity after long exposure to
the sun.
•Colors may vary from lot to lot and may not exactly match
samples of previous purchases.
•All cords will eventually wear out.
Springs Window Fashions considers these items and
occurrences normal wear and tear and they are not covered
by this warranty.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WRITTEN OR ORAL WARRANTIES OR OBLIGATIONS AND
LIABILITIES.
No person is authorized to extend or alter this warranty.
SPRINGS WINDOW FASHIONS SHALL HAVE NO LIABILITY
WHATSOEVER FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so this limitation or
exclusion may not apply to you.
Service
Warranty claims must be accompanied by the original sales
receipt as well as details regarding the nature of the problem,
location of the product, etc. To obtain warranty service
contact:
Customer Service Center
Springs Window Fashions, LLC
8467 Route 405 Highway South
PO Box 500
Montgomery, PA 17752-0500
You may also email windowfashions@springswindowfashions.
com or call 1-800-221-6352
CLEANING INSTRUCTIONS
Fabric Louvers – Dust or vacuum with an upholstery
attachment. For soil removal, sponge with a mild detergent
and warm water solution (or dry fabric cleaner) and blot dry.
Do not immerse Fabric louvers in water or dry clean.
Vinyl Louvers – Dust or vacuum with an upholstery
attachment. For soil removal, sponge with a mild detergent
and warm water solution and wipe dry. Vinyl louvers may
be removed and immersed in water. Also, if a thin film of
mild detergent is left on Vinyl louvers, it will eliminate static
electricity.
23
Effective April 2011
Springs Window Fashions
Middleton, WI
For additional Graber products, go to
24
graberblinds.com
19-0404-01 (4/11) 110001