Guía de Referencia de Patrones

Guía de Referencia de Patrones
Patrones con texturizado profundo
Los productos de metal de Rigidized® se crean mediante un proceso único que mejora la durabilidad y belleza de los metales llanos. El
proceso de Rigidized® puede ser aplicado a CUALQUIER METAL. Los patrones están disponibles en una gran variedad de anchos y
grosores. Consulte los datos técnicos en la parte posterior.
El aspecto de las muestras de patrones que aparecen en los folletos podría variar ligeramente de los productos reales en cuanto
a especificación, tamaño y color. La profundidad de los patrones varía según el calibre. Los patrones no se muestran en su
tamaño real. Para obtener una exactitud completa, pida una muestra.
Anchos máximos de patrones disponibles:
914mm
(36")
1219mm 1524mm
(48")
(60")
1ACC
914mm (36")
ACC 4i
914mm (36")
1HR
914/1219mm
(36"/48")
1NA®
914/1219mm
(36"/48")
1CS
1RL
914/1219mm
(36"/48")
1RL
914/1219mm
(36"/48")
1HM
914/1219mm
(36"/48")
1SLG
914/1219mm
(36"/48")
3FL
914/1219mm
(36"/48")
914mm (36")
2WL®
2FL
1UN
914mm (36")
2WL®
914/1219mm
(36"/48")
3ND
914/1219mm
(36"/48")
4LB
914/1219mm
(36"/48")
6HC
914/1219mm
(36"/48")
6SL®
914/1219mm
(36"/48")
5HR
6WL®
Placa con Banda de Rodadura
RSS.3
914/1219/1524mm
(36"/48"/60")
Industrial
7DL
1219mm (48")
RTP®
914/1219/1524mm
(36"/48"/60")
STP
914/1219mm
(36"/48")
914/1219/1524mm
(36"/48"/60")
914/1219mm
(36"/48")
5WL® 914/1219/1524mm
(36"/48"/60")
60LTH
XTP
914/1219/1524mm
(36"/48"/60")
914/1219mm
(36"/48")
En relieve
3SQ
1250mm (49.21")
SANDTEX
1219mm
(48")
LINEN
1250mm (49.21")
Datos técnicos
tamaños disponibles
Patrón
Ancho Máximo
Grosor en acero inoxidable
Grosor en otros metales
1ACC
914mm (36”)
0.018” - 0.125”
0.018” - 0.125”
ACC 4i
914mm (36”)
0.018” - 0.125”
0.018” - 0.125”
1CS
914mm (36")
0.46 - 1.91mm (0.018"-0.075")
0.25 - 2.03mm (0.010"-0.080")
1HM
914mm (36")
0.46 - 0.91mm (0.018"-0.036")
0.25 - 1.57mm (0.010"-0.062")
1HR
914/1219mm (36"/48")
1.22 - 1.52mm (0.048"-0.060")
1.22 - 1.57mm (0.048" - 0.062")
1NA®
914/1219mm (36"/48")
0.46 - 1.91mm (0.018" - 0.075")
0.25 - 2.29mm (0.010" - 0.090")
1RL
914/1219mm (36"/48")
0.46 - 3.05mm (0.018" - 0.120")
0.46 - 3.18mm (0.018" - 0.125")
1SLG
914/1219mm (36"/48")
0.46 - 1.22mm (0.018" - 0.048")
0.25 - 1.57mm (0.010" - 0.062")
1UN
914/1219mm (36"/48")
0.46 - 3.05mm (0.018" - 0.120")
0.46 - 3.18mm (0.018" - 0.125")
2FL
914/1219mm (36"/48")
0.61 - 3.05mm (0.024" - 0.120")
0.51 - 3.18mm (0.020" - 0.125")
2WL
914/1219mm (36"/48")
0.46 - 0.91mm (0.018" - 0.036")
0.20 - 0.81mm (0.008" - 0.032")
3FL
914/1219mm (36"/48")
0.46 - 1.52mm (0.018" - 0.060")
0.25 - 1.57mm (0.010" - 0.062")
3ND
914/1219mm (36"/48")
0.46 - 0.91mm (0.018" - 0.036")
0.61 - 1.02mm (0.024" - 0.040")
4LB
914/1219mm (36"/48")
0.46 - 1.52mm (0.018" - 0.060")
0.25 - 2.29mm (0.010" - 0.090")
5HR
914/1219mm (36"/48")
0.61 - 1.52mm (0.024" - 0.060")
0.64 - 1.57mm (0.025" - 0.062")
5WL
914/1219/1524mm
(36"/48"/60")
0.46 - 1.91mm (0.018" - 0.075")
0.20 - 1.91mm (0.008" - 0.075")
6HC
914/1219mm (36"/48")
0.61 - 2.67mm /3.05mm max
914mm wide (0.024" - 0.105" /
0.120" max 36" wide)
0.61 - 3.18mm (0.024" - 0.125")
6SL®
914/1219mm (36"/48")
0.46 - 1.22mm /1.52mm consulte
con la fábrica para averiguar el
ancho máximo (0.018" - 0.048" /
0.060” consult factory for max width)
0.61 - 3.18mm (0.024" - 0.125")
6WL®
914/1219/1524mm
(36"/48"/60")
0.46 - 3.05mm (0.018" - 0.120")
0.20 - 3.18mm (0.008" - 0.125")
60LTH
914/1219/1524mm
(36"/48"/60")
0.46 - 1.91mm (0.018" - 0.075")
0.25 - 2.29mm (0.010" - 0.090")
7DL
1219mm (48")
0.91 / 1.52 / 1.91mm (0.036" /
0.060" / 0.075")
N/A
LINEN*
1250mm (49.21")
0.74 - 1.91mm (0.029" - 0.075")
N/A
SANDTEX®*
1219mm (48")
0.91 - 1.52mm (0.036" - 0.060")
N/A
3SQ*
1250mm (49.21")
0.74 - 1.91mm (0.029" - 0.075")
N/A
RSS.3
914/1219/1524mm
36"/48"/60")
0.74 - 3.05mm (0.029" - 0.120")
0.91 - 3.18mm (0.036" - 0.125")
RTP®
914/1219/1524mm
36"/48"/60")
0.46 - 3.05mm (0.018" - 0.120")
0.25 - 3.18mm (0.010" - 0.125")
STP
914/1219mm (36"/48")
1.91 - 2.67mm (0.075" - 0.105")
2.03 - 2.54mm (0.080" - 0.100")
XTP
914/1219mm (36"/48")
0.61 - 1.91mm (0.024" - 0.075")
0.61 - 2.03mm (0.024" - 0.080")
3.QLT
1219mm (48")
0.61 - 0.74mm (0.024" - 0.029")
0.61 - 0.81mm (0.024" - 0.032")
Square
1118mm (44")
0.74mm (0.029")
0.81mm ** (0.032")**
Diagonal
1143mm (45")
0.74mm (0.029")
0.81mm ** (0.032")**
Checkerboard
1118mm (44")
0.74mm( 0.029")
N/A
Harlequin
1143mm (45")
0.74mm (0.029")
N/A
Diamond
1143mm (45")
0.74mm (0.029")
0.81mm ** (0.032" )**
Mosaic
1143mm (45")
0.74mm (0.029")
N/A
®
®
Rigidized® Metals Corporation | 658 Ohio Street | Buffalo, New York 14203 | EE.UU.
TELÉFONO GRATIS 800.836.2580 | TEL. 716.849.4760 | FAX 716.849.0401 | www.rigidized.com
Rigidized® y Rigid-Tex® 1NA®, 2WL®, 5WL®, 6WL®, 6SL®, RTP® y Sandtex® son marcas comerciales
registradas. ©2015 por Rigidized® Metals Corporation 10/15
3.QLT | 4.QLT | 6.QLT
SQUARE
DIAGONAL
CHECKERBOARD
HARLEQUIN
DIAMOND
MOSAIC
Longitudes estándar: 2438mm, 3048mm,
3658mm
*Disponible solamente en acabado templado
(Annealed) brillante
**Disponible solamente en aluminio y cobre
7DL en acabado 2B solamente
Por favor llame al departamento de servicio al
cliente en cuanto a acabados específicos, especificaciones de patrones, tamaños no
estándares, información técnica y muestras
gratis.
Entre los metales texturizados se
encuentran los siguientes: acero
inoxidable, cobre, aluminio, latón, titanio, bronce,
acero, perforado, galvanizado y
galvanelado.