Technical datasheet pdf

Comments

Transcription

Technical datasheet pdf
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
1. TECHNICAL DATA
LIGHT FITTING
Bdoy is made from AlSi alloy treated with polyester poder paint.
CLAMPS
Steel with eye Ø 18 mm
POWER SOURCE
230V, 50Hz
LAMP
See tables by model
IP PROTECTION
IP 65
INSULATION CLASS
Class I
WORK TEMPERATURE
-20 ºC to +40 ºC
ACCESORIES (INCLUDED)
Protective guard
Clamps for earthing internal and external.
ATEX MARK
II 2GD Ex de tD IIC T3-T6
CABLE ENTRY
Max. Section of connecting conductors 4mm2.
2. IMAGES
LUMEX
PAGE
1/8
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
3. DIMENSIONS
WITHOUT REFLECTOR BELL
WITH REFLECTOR BELL
PAGE
2/8
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
4. VERSIONS AND AVAILABLE POWERS
FOR TEMPERATURES –20 ºC to +50 ºC
Class
Tª
Tmáx sup. (ºC)
Lámpara incandescente 200W E27
T4
114
Lámpara incandescente 150W E27
T4
102
Lámpara incandescente 60-100W E27
T5
90
Luz mezcla 160W
T4
100
Vapor de mercurio 80W
T4
105
Sodio 50W
T4
109
Vapor mercurio 125W
T3
131
Vapor sodio 110W
T4
109
Lámpara fluorescente compacta TC-D
26W
T6
70
Ref.
EX116
EX117
EX118
EX119
Light source
Weight Voltage
(Kg)
(V/Hz)
8/8.5
Cable
gland
Screw
Plug
M25x1.5
M25x1.5
V-Ex
HSK-V-Ex
M25x1.5
230 V
50 Hz
HSK-K-Ex
9-16mm
8.5 / 9
THERE ARE AVAILABLE VERSIONS ON DEMAND TO TEMPERATURES BETWEEN –20 ºC TO +40 ºC
WHIT OTHER SOURCES OF LIGHT.
PAGE
3/8
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
5. LUMEX ACCESORIES
REF.
DESCRIPTION
EX106
Protective guard
EX107
Flange with glass
EX108
Lampshare
EX109
Holder for immovable fixing to celing
EX110
Blinding plug
EX111
Optical red insert
EX112
Optical green insert
EX113
Optical clear with refractor for sinalling
Purposes
EX114
Wrench M 205 x 2 type
EX115
Flange cable grand
PAGE
4/8
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
6. ATEX MARKIED NOMENCLATURE
PROTECTION
MODE
II 2 DG
GROUP
TEMPERATURE
CLASS
Ex
d
IIC
T6
Ex
tD
A21
IP66
PROTECTION
MODE
ZONE
IP PROTECTION
DEVICE
CATEGORY
T 85ºC
TEMPERATURE
CLASS
ATEX ZONE CLASSIFICATION
GROUP II FIXTURES: ABOVE GROUND INDUSTRIES
ZONE
CATEGORY
EXPLOSIVE ENVIRONMENT PRESENCE
Zone 0
1G (gases and vapors)
Zone 20
1D (powders)
Zone 1
2G (gases and vapors)
Zone 21
2D (powders)
Zone 2
3G (gases and vapors)
Never in normal service, only for short periods
Zone 22
3D (powders)
of time.
Constant, permanent.
Occasional, frequent.
GROUP I FIXTURES: MINES WITH FIRE-DAMP
M1
Presence (methane, dust)
M2
Presence risk (methane, dust)
PAGE
5/8
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
PROTECTION MODES
SYMBOL
PROTECTION TYPE
ZONE
d
Explosion proof
1,2
e
Increased security
1,2
ia
Intrinsic security
0,1,2
ib
Intrinsic security
1,2
o
Oil inmersion
2
p
Pressurized
1,2
q
Below sand
1,2
m
Encapsulated
1,2
n
Antisparks
2
TEMPERATURE CLASS
*
TEMPERATURE CLASS
MÁX. SURFACE TEMPERATURE (ºC)
T1
450
T2
300
T3
200
T4
135
T5
100
T6
85
The material marked as IIB suited to applications requiring material marked as IIA and IIC adapted for
IIA and IIB.
PAGE
6/8
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
CLASSIFICATION OF GASES AS
YOUR TEMPERATURE OF IGNITION (*)
TEMPERATURE CLASS
GROUPS
GASES
I
Methane (fire-damp)
•
Acetone
Acetic acid
Ammonia
Ethane
Methylene chloride
Methane (CH4)
Carbon oxide
Propane
•
•
•
•
•
•
•
•
A
T1
N-Butane
N-Butyl
T2
T3
•
•
Ethyl nitrite
C
T6
•
Acetaldehyde
Ethyl ether
B
T5
•
•
N-Hexane
II
T4
•
Ethyl
Ethyl oxide
Sulfur hydrogen
•
•
Acetylene (C2H2)
Carbon Sulfur (CS2)
Hydrogene (H2)
•
•
•
•
PAGE
7/8
Código: FT-OR01-I
Revisión: 0
25/03/2013
LUMEX
7. APPLICATIONS AND CONSTRUCTIONS DETAILS.
For illumination of industrial spaces (indoor, under cover and outdoor), other then mines, especially places with
high ceillings Applications:

Locations where volatile flammable liquid transfer from one container to another.

Garages and car repair shops. It excludes garages of private use for parking of 5 vehicles or less.

Interiors of paint booths where spray systems are used and their immediate environment when using solvents.

Dries of material with inflammable solvents

Places of extraction of fats and oils that use inflammable solvents.

Places with warehouses of inflammable opened liquids or that could be opened.

Zones of laundries and dry cleaner's shops in which inflammable liquids are used.

Rooms of fuels.

Facilities where they take place, manipulate, store or consume inflammable gases.

Pump rooms and / or compressor flammable liquids and gases.

Interiors of refrigerators and freezers in which inflammable matters are stored in opened containers, easily
perforables or with slightly consistent closings
Technical description:
Luminaire consists from body, basic plate and flange with protective glass. Body and flange are made from AlSi
alloy treated with polyester poder paint. Luminaire can be suspended by the help pendant with eye Ø 18 mm.
The connecting area (increased safety “e”) is placed on the side of the body and equipped with connecting clamps and 2 cable glands M25x1.5 for cables Ø 9-16 mm (10-16 mm by versions F). Area is enclosed with securing screw; thread shapes a rift of flameproof encloruse “d”. Protective hardened glass is resistant against mech
chock min 7J and is fixed in the flange; the connection is filled with polyeurethane putty. The mobile steel hinge is
fixed to the flange and enables to hang up the flange during mounting or dismounting. Steel parts are glavanized
and treated with chromating. Luminaire is designed as through-way one, when used piece there is necessary to
substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug. The
blinding parts can be delivered on order optionally.
* For major information put in touch with the technical department.
PAGE
8/8