QuickSpecs

Transcription

QuickSpecs

Resposta da HP Brasil Indústria e
Comércio de Equipamentos
Eletrônicos Ltda. para
Departamento Estadual de Trânsito
– DETRAN - SP
EDITAL DE PREGÃO ELETRÔNICO Nº 101/2015 - OFERTA DE
COMPRA N.° 292303290572015OC00069
São Paulo, 05 de outubro de 2015.
BD7391-SR1061511_Proposta_Técnica_Comercial_ OPI-0124692326
HP Brasil Indústria e Comércio de Equipamentos Eletrônicos Ltda.
Avenida Tamboré, 74 – Bloco 7 – 1º andar
Tamboré - Barueri, São Paulo, Brasil, 06460-010
www.hp.com.br
Valter Antonio Sgroi Artea
Representante Legal
Tel.: +55 11 94301-6145
e-mail : [email protected]
Ao
Departamento Estadual de Trânsito – DETRAN - SP
Prezados (as) Senhores(as):
Temos o prazer apresentar a nossa proposta técnico-comercial referente ao EDITAL DE
PREGÃO
ELETRÔNICO
Nº
101/2015
OFERTA
DE
COMPRA
N.°
292303290572015OC00069.
Estamos confiantes que as informações contidas nesta proposta possam atender suas
necessidades, demonstrando desta maneira a potencialidade de nossa empresa nos termos
de qualidade de produtos e serviços.
Esta proposta foi desenvolvida por HP Brasil Indústria e Comércio de Equipamentos
Eletrônicos Ltda., que analisou todos os aspectos necessários para uma implementação
bem sucedida.
Estamos confiantes em demonstrar os benefícios de valor agregado da proposta e construir
um relacionamento de negócio sólido e benéfico para ambas as partes.
Colocamo-nos à disposição para quaisquer esclarecimentos que se faça necessário.
Atenciosamente,
_________________________________________________________
Representante Legal
Resposta da HP para DETRAN-SP
Índice
1. Anexo II – Modelo de Proposta ....................................................................................... 4
2. Informações Complementares ...................................................................................... 14
4. Anexos ............................................................................................................................ 16
HP Confidential—subject to use restriction
Page-3
1. Anexo II – Modelo de Proposta
Ao
Departamento Estadual de Transito de São Paulo – DETRAN-SP
Rua João Brícola, 32 – Centro – São Paulo – SP.
REF.: PREGÃO ELETRÔNICO Nº 101/2015
PROCESSO DETRAN/SP N° 304394-0/2015
Item
Quant.
Descrição do Material
MICROCOMPUTADOR ALL-IN-ONE
Preço
Unitário R$
3.764,20
Preço Total
R$
2.183.236,00
Microcomputador All-In-One proposta em
atendimento ao item 1 do Anexo I, inofrmar:
a) Nome do fabricante: Hewlett-Packard
b) Modelo: HP ProOne 400 G1 All-in-One
Business PC (19.5" Non-Touch)
c) Nº de referência (Part Number): CTO
PROCEDÊNCIA: BRASIL
Placa-mãe e padrão da Memória RAM
propostas no Desktop do item 1 do Anexo I,
informar:
a) Nome do fabricante: HP
1
580
b) Modelo: HP ProOne 400 G1 All-in-One
Business PC (19.5" Non-Touch)
c) Padrão da Memória RAM: DDR3 – 1600 MHz
non ECC
Processador proposta em atendimento ao item
1.2 do Anexo I, informar:
a) Nome do fabricante: Intel
b) Modelo, frequência e cache: Pentium G3220T
– 2.6 GHz de frequência e 3 MB de cache.
Disco Rígido proposta em atendimento ao item
1.11 do Anexo I, informar:
a) Nome do fabricante: HP
b) Tecnologia, Modelo e Capacidade: Solid State
Hybrid Drives (SSHD) 500GB
c) Nº de referência (Part Number): E1C62AA
Page-4
Sistema Operacional proposto em atendimento ao
item 1.22 do Anexo I:
a) Nome do fabricante: Microsoft
b) Modelo: Windows 8.1 Pro
c) Nº de referência (Part Number): OEM
Validade da proposta: 60 (sessenta) dias, a contar da data fixada para a sessão de
processamento do Pregão.
Representante Legal
ANEXO I
MEMORIAL DESCRITIVO
ESPECIFICAÇÕES TÉCNICAS BÁSICAS REQUERIDAS
MICROCOMPUTADOR ALL-IN-ONE
DESKTOP ALL-IN-ONE
1.1 QUANTIDADE
a) Serão fornecidos 580 (quinhentos e oitenta) Microcomputadores All-in-One
novos, idênticos e sem uso anterior. O modelo ofertado está em linha de
produção, sem previsão de encerramento, na data de entrega da proposta.
1.2 PROCESSADOR
a) 01 (um) processador – Intel Pentium G3220T, padrão de arquitetura do
processador x86 de 32 bits com suporte à extensão 64 bits, com tecnologia de
fabricação de 22 nanômetros e memória cache integrada ao processador.
b) Cache L2 e/ou L3 de 3MBytes.
c) A velocidade do barramento de comunicação do processador com o restante do
sistema de 5 GT/s (Gigatranfers por segundo).
Page-5
d) Pontuação mínima de 210 obtida com software BAPCO SYSmark 2007 no modo
customizado e selecionando o cenário SYSmark 2007 Preview Rating, com 3
(três) interações, conforme procedimentos especificados nos itens 1.2.1, 1.2.2 e
1.2.3 do edital.
e) O processador implementa mecanismos de redução de consumo de energia
compatível com o padrão ACPI versão 2.0 ou superior e possui controle
automático para evitar superaquecimento que possa danificá-lo.
1.3 MEMÓRIA RAM
a) Serão fornecidos com 4GBytes de memória RAM por computador.
b) Barramento de memória do tipo DDR3 1600 MHz ou superior,
1.4 CIRCUITOS INTEGRADOS DE CONTROLE AUXILIAR DO PROCESSADOR
(CHIPSET)
a) O chipset suporta velocidade do barramento de comunicação com o processador
de no mínimo 5GT/s, de acordo com o processador ofertado.
b) O chipset suporta no mínimo memória RAM do tipo DDR3 com freqüência igual
a 1600MHz.
c) Possui controladora SATA III, com no mínimo 1 conector
d) Implementa mecanismos de redução de consumo de energia compatível com o
padrão ACPI versão 1.0 ou superior.
1.5 PLACA MÃE (MOTHERBOARD)
a) O BIOS do tipo Flash Memory, utilizando memória não volátil e eletricamente
reprogramável.
b) Mostra no monitor de vídeo o nome do fabricante do computador sempre que o
computador é inicializado.
c) A inicialização do computador é realizada na sequência definida pelo usuário, via
CDROM e/ou disco rígido, bem como suportar pela placa de rede através do
recurso WOL (Wake on LAN) compatível com o padrão PXE (Pré-boot Execution
Enviroment).
d) Possui recursos de controle de permissão através de senhas, uma para inicializar
o computador e outra para acesso e alterações das configurações do BIOS.
1.6 PORTAS DE COMUNICAÇÃO
a) Todos os conectores das portas de entrada/saída de sinal são identificados no
padrão de cores PC-99 System Design Guide, bem como pelos nomes ou
símbolos.
b) 06 (seis) portas USB, sendo 04 (quatro) portas na versão 2.0 e 2 (duas) na versão
3.0.
c) 01 (uma) porta da interface de rede padrão RJ45.
d) Possui 1 porta HDMI sendo por meio de adaptador, fornecido com o equipamento.
1.7 INTERFACE DE REDE
a) 01 (uma) interface de rede por computador.
b) Padrão PCI, on-board.
c) Interface de rede padrão Gigabit Ethernet.
d) Opera automaticamente nas velocidades de comunicação de 10Mbps ou
100Mbps ou 1000Mbps, bem como no modo full-duplex.
Page-6
e) Compatibilidade funcional e operacional com os padrões IEEE 802.3 para
10baseT (Ethernet), IEEE 802.3u para 100baseTX (Fast Ethernet) e IEEE
802.3ab para 1000baseT (Gigabit Ethernet).
f) Possui recursos de Wake on LAN (WOL) e Pré-boot Execution Enviroment (PXE).
g) Leds de sinalização para link e atividade;
1.8 INTERFACE DE REDE WIRELESS
a) 01 (uma) interface de rede wireless por computador;
b) Padrão PCI ou superior;
c) Segurança WPA, WPA2;
d) Compatibilidade funcional e operacional com os padrões IEEE 802.11b IEEE
802.11g e IEEE 802.11n.
1.9 CONTROLADORA DE VÍDEO
a) 01 (uma) controladora de vídeo por computador.
b) Padrão PCI Express ou superior.
c) Tamanho de memória de vídeo de no mínimo 128MBytes, com mecanismo de
alocação dinâmica ou não da memória RAM do sistema, permitindo que parte da
memória RAM do sistema seja alocada para vídeo à medida que seja necessária
e liberada quando não estiver sendo usada.
d) Resolução gráfica de 1600 x 900 pixels
1.10
CONTROLADORA SATA
a) 01 (uma) controladora SATA III com no mínimo 01 conector, integrada à placamãe.
b) Taxa de transferência de dados de no mínimo 6GB/s ou superior.
1.11
a)
b)
c)
d)
DISCO RÍGIDO TIPO SSHD
01 (um) disco rígido por computador.
Tipo interno ao gabinete.
Disco rígido padrão SATA III.
Capacidade de armazenamento por disco de 500GB com unidade Flash integrada
de 8GB.
e) Velocidade de rotação de 5400rpm.
f) Taxa de transferência de dados de no mínimo 6GBytes/s ou superior.
g) Tecnologia de pré-falha SMART (Self Monitor Analysis Report Test) incorporado.
1.12
a)
b)
c)
d)
e)
UNIDADE ÓPTICA DVD-RW
01 (uma) unidade por computador.
Tipo interno ao gabinete.
Padrão SATA ou tecnologia superior.
A unidade óptica possibilita leitura e gravação.
Fornecido software para gravação de DVD e CD, compatíveis com os padrões
suportados pela unidade fornecida.
1.13
KIT DE ÁUDIO
01 (um) Kit de Áudio composto por 01 (uma) Controladora de som, 01 (um) Altofalante por computador.
a)
Page-7
b)
c)
1.14
a)
b)
1.15
a)
b)
A controladora possui 01 (uma) saída amplificada para canais estereofônicos e
01 (uma) entrada para microfone.
Fornecido Alto-falante interno com amplificador de sinal, de modo a eliminar o
uso de caixas de som externas.
WEBCAM
Possui 01 (uma) webcam integrada por computador.
Resolução de 1MP (HD)
LEITOR DE CARTÃO DE MEMÓRIA
Fornecido 01 (um) Leitor de cartão de memória por computador.
Compatível com cartões SD (Secure Digital) e MMC (MultiMedia Card).
1.16
TECLADO
a) Fornecido 01 (um) teclado por computador.
b) Teclado com conjunto de no mínimo 104 teclas com teclado numérico e teclas de
função.
c) Compatibilidade com o padrão ABNT Variant 2.
d) Conector do cabo de sinal padrão USB.
1.17
MOUSE
a) Fornecido 01 (um) mouse por computador.
b) Mouse tipo óptico com 3 botões, sendo 2 para seleção de objetos e 1 tipo scroll
para rolagem.
c) Resolução de no mínimo 1000dpi.
d) Conector do cabo de sinal padrão USB.
1.18
MONITOR DE VÍDEO
a) Fornecido 01 (um) monitor de vídeo integrado ao gabinete formando único
volume.
b) Tipo Matriz Ativa TFT LCD e tecnologia LED policromático de 19,5” polegadas.
c) Formato widescreen 16:9.
d) Resolução gráfica suportada de 1600 x 900 pixels.
1.19
a)
b)
c)
d)
GABINETE DA CPU
Gabinete tipo All in One.
Possui no mínimo 01 (uma) baia para unidade óptica.
Possui no mínimo 01 (uma) baia interna para disco rígido.
O computador possui botão liga/desliga e deve ser desligado por software
mantendo pressionado o botão, o qual deve possuir dispositivo de proteção para
prevenir o desligamento acidental do computador.
e) Possui display ou Leds acoplados no computador para indicar e permite monitorar
as condições de funcionamento do mesmo.
f) Possui base que permita ajuste de altura e inclinação.
1.20
FONTE DE ALIMENTAÇÃO
a) Fornecida 01 (uma) fonte de alimentação interna ou externa, bivolt com seleção
automática 100 ~ 240 VAC, capaz de sustentar a configuração máxima do
computador.
Page-8
b)
c)
Fornecido cabo para cada fonte de alimentação de energia elétrica com plugue
padrão NBR 14136 (novo).
Fornecido adaptador para cada cabo de alimentação fornecido, isto é, do novo
padrão NBR 14136 para o padrão NEMA 5-15P.
1.21
SISTEMA OPERACIONAL
a) Desktop será entregue com 01 (uma) licença, bem como com as mídias de
instalação (DVD-ROM), do sistema operacional corporativo MS-Windows 8.1
Professional 32 bits na versão e release mais recente, com suporte a
DOWNGRADE, contudo o equipamento deverá vir instalado de fábrica e
devidamente configurado com o sistema operacional Microsoft Windows 7
Professional 32 bits.
b) O Desktop e todos os seus periféricos são compatíveis com os sistemas
operacionais Windows 7 e Windows 8 Professional 32/64bits.
c) Apresentado relatório emitido pela lista de compatibilidade HCL Microsoft,
comprovando que o equipamento proposto está homologado para o Sistema
Operacional citado no item “a” 1.21 do anexo 1 deste edital na plataforma
Microsoft encontrados no site:
https://sysdev.microsoft.com/en-US/Hardware/lpl/.
d) O Desktop é fornecido com drivers para a interface de rede, controladora de
vídeo, controladora de disco, unidade DVD-RW e demais componentes.
1.22
AGENTE PARA GERENCIAMENTO E INVENTÁRIO
a) Para o gerenciamento e inventário do computador, será disponibilizado um
agente DMI ou WMI, o qual deverá informar no mínimo o número de série,
fabricante e número do ativo fixo do equipamento em campo editável; modelo e
freqüência de clock do microprocessador; quantidade de memória RAM instalada;
tamanho total do disco rígido; versão da BIOS e do sistema operacional instalado.
1.23
QUALIDADE DO EQUIPAMENTO
a) Será entregue Certificado ou Relatório de Avaliação de Conformidade emitido por
um órgão credenciado pelo INMETRO ou Certificado similar, comprovando que o
COMPUTADOR está em conformidade com a norma IEC 60950 (Safety of
Information Technology Equipment Including Eletrical Business Equipment), para
segurança do usuário contra incidentes elétricos e combustão dos materiais
elétricos.
b) Possui identificação impressa com o nome do fabricante, modelo e número de
série, estas identificações não poderão ser feitas com etiquetas auto-adesivas de
fácil remoção ou danificação.
1.24
RESPONSABILIDADES COM O MEIO AMBIENTE
a) O modelo do equipamento ofertado está registrado no EPEAT (Electronic Product
Environmental Assessment Tool) da Agência de Proteção Ambiental (EPA), na
categoria Silver ou Gold, no site: http://www.epeat.net, comprovando que o
equipamento atinge as exigências para controle do impacto ambiental em seu
processo de fabricação.
b) O modelo ofertado está em conformidade com o padrão RoHS (Restriction of
Hazardous Substances), isto é, ser construído com substâncias que não agridem
o meio ambiente tais como: cádmio (Cd), mercúrio (Hg), cromo hexavalente
(Cr(VI)), bifenilos polibromados (PBBs), éteres difenilpolibromados (PBDEs) e
chumbo (Pb).
Page-9
1.25
ACESSÓRIOS
a) Serão fornecidos junto com o computador, todos os acessórios e cabos para o
pleno funcionamento do mesmo.
1.26
ACONDICIONAMENTO
c) Os computadores e os acessórios serão acondicionados em embalagens com
caixa e calços de proteção especialmente desenvolvidos para suportar o
empilhamento e as vibrações.
1.27
DOCUMENTAÇÃO TÉCNICA
a) Serão fornecidos manuais técnicos do usuário e de referência contendo todas as
informações sobre os produtos com as instruções para instalação, configuração,
operação e administração.
2. CONDIÇÕES CONTRATUAIS
2.1. LOCAIS DE ENTREGA
a) Os equipamentos e manuais técnicos especificados neste documento deverão ser
entregues, de forma descentralizada, nas dependências do CONTRATANTE nas
localidades relacionadas na "RELAÇÃO DE UNIDADES, QUANTITATIVOS, CIDADE",
distribuídos no Estado de São Paulo
CIRETRAN
FRANCA
PIRACICABA
SÃO JOSÉ DOS CAMPOS
TAUBATÉ
GUARUJÁ
EMBU DAS ARTES
JAÚ
SERTAOZINHO
VALINHOS
GUARATINGUETA
LEME
CRUZEIRO
IBIÚNA
LENÇÓIS PAULISTA
TAQUARITINGA
UBATUBA
ARAÇOIABA DA SERRA
BARRINHA
QUANTIDADE
58
41
58
58
5
12
6
6
12
11
5
7
7
7
7
7
17
17
Page-10
BERTIOGA
BILAC
CORDEIRÓPOLIS
ITARARÉ
MIRANDÓPOLIS
PILAR DO SUL
SANTA ROSA DE
VITERBO
AURIFLAMA
BOA ESPERANÇA DO SUL
CAFELÂNDIA
CARDOSO
CESARIO LANGE
CONCHAS
GENERAL SALGADO
GUARÁ
IACANGA
JACUPIRANGA
JUNQUEIRÓPOLIS
JUQUIÁ
TOTAL
17
17
17
17
17
17
17
10
10
10
10
10
10
10
10
10
10
10
10
580
b) A Contratada deverá observar os seguintes procedimentos:
 As entregas deverão ser agendadas previamente com o funcionário responsável da
CIRETRAN informado na respectiva Ordem de Fornecimento;
 A nota fiscal de entrega só será aceita para pagamento se, no respectivo canhoto,
contiver o nome legível do funcionário da CIRETRAN autorizado a recebê-la, seu respectivo
registro e sua assinatura.
e) 2.2. PRAZOS DE ENTREGA
a) Deverá ser observado Cronograma Mensal definido pela Administração do
DETRAN.SP, contemplando as UNIDADES / CIRETRANs aptas a receber os equipamentos
nos 30 dias ulteriores à emissão da respectiva Ordem de Fornecimento (OF).
f) 2.3 INSTALAÇÃO
Page-11
a) É de responsabilidade do CONTRATANTE a instalação dos produtos especificados
neste memorial;
b) A CONTRATADA obriga-se, caso solicitado pelo CONTRATANTE, a prestar suporte
técnico na instalação dos produtos especificados neste documento.
g) 2.4 ACEITE
a) O CONTRATANTE emitirá o termo de aceite após a constatação de que os nomes e
modelos dos produtos fornecidos correspondem aos propostos e que estes atendem às
especificações técnicas básicas requeridas na aquisição;
b) O prazo máximo para emissão do termo de aceite dos produtos especificados neste
documento é de 15 (quinze) dias a contar da data de entrega dos mesmos. Caso os
produtos apresentem defeito ou não atendam às especificações técnicas básicas
requeridas, o prazo de aceite será reiniciado após a solução dos problemas detectados;
c) O prazo máximo para a CONTRATADA solucionar os problemas reportados é de 05
(cinco) dias a contar do comunicado do CONTRATANTE;
d) Caso haja reincidência dos problemas reportados o aceite será novamente interrompido
e a CONTRATADA será comunicada para substituir os produtos com defeito por outros
novos, no prazo máximo de 05 (cinco) dias.
h) 2.5 GARANTIA E ASSISTÊNCIA TÉCNICA
a) O prazo mínimo de garantia dos equipamentos especificados neste memorial é de 36
(trinta e seis) meses a contar da data de aceite dos mesmos;
b) Durante o prazo de garantia deverá ser substituída sem ônus para o CONTRATANTE, a
parte ou peça defeituosa, exceto quando o defeito for provocado por uso inadequado dos
equipamentos;
c) Os serviços de reparo dos equipamentos aqui especificados deverão ser executados no
local de uso dos equipamentos (ON-SITE) ou na impossibilidade, no centro de manutenção
da CONTRATADA;
d) O período de disponibilidade para serviços de manutenção dos equipamentos aqui
especificados é de segunda a sexta-feira, das 8h00 às 18h00, exceto feriados;
e) O prazo máximo para atendimento e reparo/solução do(s) problema(s) que
ocasionou(aram) o chamado dos equipamentos especificados neste documento é de 16
Page-12
horas contadas a partir da abertura do chamado e dentro do período de disponibilidade
especificado na alínea “d” deste subitem;
f)
sejam
Caso o reparo/solução dos equipamentos especificados no(s) item(ns) não
solucionados no prazo máximo estipulado, a CONTRATADA deverá colocar à
disposição um equipamento idêntico ou no mínimo equivalente. Se o problema não for
solucionado no prazo máximo de 30 (trinta) dias corridos, o EQUIPAMENTO deverá ser
substituído definitivamente por um novo, abrindo-se, para isso, novo período de garantia, a
partir da data do seu recebimento definitivo;
g) A empresa fabricante do equipamento deverá dispor de um número telefônico para
suporte técnico e abertura de chamados técnicos;
h) Todos os drivers para os sistemas operacionais suportados devem estar disponíveis
para download na web-site do fabricante do equipamento.
Page-13
2. Informações Complementares
Validade da Proposta
Conforme ítem 3 do edital. O prazo de validade da proposta será de 60 (sessenta) dias.
Prazo de Pagamento
Conforme ítem X. DA FORMA DE PAGAMENTO do edital. 1. Os pagamentos serão
efetuados em 30 (trinta) dias (artigo 2º do Decreto nº 32.117, de 10/08/1990, com redação
dada pelo Decreto nº 43.914, de 26/03/1999), contados da apresentação da nota
fiscal/fatura nas respectivas CIRETRANS, conforme especificações do Memorial Descritivo,
que integra o Anexo I deste Edital, à vista do respectivo Termo de Recebimento Definitivo
do objeto ou Recibo, na forma prevista no subitem 4 do item IX.
Prazo de Garantia
Conforme anexo I, subitem h) 2.5 GARANTIA E ASSISTÊNCIA TÉCNICA. O prazo mínimo
de garantia dos equipamentos especificados neste memorial é de 36 (trinta e seis) meses
a contar da data de aceite dos mesmos;.
Prazo de Entrega
Conforme edital anexo I subítem e) 2.2. PRAZOS DE ENTREGA: a)
Deverá
ser
observado Cronograma Mensal definido pela Administração do DETRAN.SP, contemplando
as UNIDADES / CIRETRANs aptas a receber os equipamentos nos 30 dias ulteriores à
emissão da respectiva Ordem de Fornecimento (OF).
Dados Bancários
Número
Praça de
do
Agência Conta Corrente Pagamento
Banco
Banco
Banco do Brasil S/A
001
1914-3
5.221-3
São
Paulo/SP
CNPJ
22.086.683/0001-84
Dados de faturamento
Para Efeito de Faturamento – Filial Louveira SP
Hardware
Endereço: Av. José Luiz Mazzali, 360 - Galpão B - Parte 6 - Residencial Burck
CEP 13290-000 - Louveira - SP
CNPJ: 22.086.683/0003-46
Inscrição Estadual: 421.028.859.113
Inscrição Municipal: 7795
Dados para efeito de correspondencia
–
–
–
–
–
Razão Social: HP Brasil Indústria e Comércio de Equipamentos Eletrônicos Ltda.
Endereço: Alameda Araguaia, 1142, CEP: 06455-000– Alphaville – Barueri – SP
Telefone / Cel: (11) 9.7237.0275
E-mail: e-mail do [email protected] ou [email protected]
A/C: Sales Operations VDO – Sra.Vanessa Santos
Page-14
Sâo Paulo, 05 de outubro de 2015.
Representante Legal
Page-15
3. Anexos

Anexo01_HP ProOne 400 G1 All-in-One PC
Page-16
QuickSpecs
HP ProOne 400 G1 All-in-One PC (19.5inch Non-Touch)
Overview
HP ProOne 400 G1 All-in-One Business PC
FRONT
1.
Microphones (optional)
2.
Webcam activity LED
3.
Webcam (optional)
4.
Power button
5.
Speakers
c04128088 United States QuickSpecs
Page 1
QuickSpecs
Overview
BACK
1.
Stand
2.
Security screw
3.
Power connector LED indicator
4.
Power connector
5.
DisplayPort
6.
RJ-45 Gigabit Ethernet port
7.
Security lock slot
8.
(4) USB 2.0 ports
9.
Serial RS-232 port
10.
Stereo audio line out
11.
VESA mount
Page 2
QuickSpecs
Overview
SIDE
1.
Optical Disc Drive (optional)
2.
Optical eject button
3.
Optical activity LED
4.
Hard Disc Drive activity LED
5.
Media Card Reader activity LED
6.
SD Media Card Reader (optional)
7.
(2) USB 3.0 Ports, including 1 fast charging port
8.
Microphone jack
9.
Headphone jack
At A Glance
Windows 7 or Windows 8.1
19.5 inch diagonal widescreen WLED backlit anti-glare LCD
Integrated all-in-one form factor
Intel® H81 Express chipset
Page 3
QuickSpecs
Overview
Intel 4th Generation Core™ processors
Integrated Intel HD Graphics
Integrated Realtek RTL8151GH-CG GbE Ethernet Controller
Optional wireless connectivity:
Intel Dual Band Wireless-N 7260 (mini PCI Express)
Intel 802.11 a/b/g/n
WLAN and Bluetooth Combo Card
HP 802.11 a/b/g/n Bluetooth® 4.0
WiDi support (with Intel 7260 WLAN and Intel® HD Graphics)
Optional Integrated 1 MP webcam & dual microphone array
Business quality speakers
DTS Sound +™
Up to 16 GB of DDR3 SDRAM, dual channel memory support, two SODIMM slots
Self-Encrypting Solid State Drive, 500GB Self-encrypting Drive, 1TB Solid State Hybrid Drive
Optional Slim Tray-load SuperMulti DVD Writer, DVD-ROM, or BDXL Blu-ray Writer Optical Disc Drive
Optional SD Media Card Reader
Serial port
DisplayPort out
Integrated VESA 100 x 100 mounting holes
Skype Ready
Low Halogen
ENERGY STAR® qualified. EPEAT® registered where applicable/supported. See www.epeat.net for registration status by country.
CCC, CECP & SEPA Certified
Page 4
QuickSpecs
Standard Features and Configurable Components (availability may vary by country)
OPERATING SYSTEM
Preinstalled
Windows 8.1 Pro (64-bit)*
Windows 8.1 (64-bit)*
Windows 7 Professional (32-bit)**
Windows 7 Professional (64-bit)**
Windows 7 Professional (32-bit) (available through downgrade rights from Windows 8.1 Pro)***
Windows 7 Professional (64-bit) (available through downgrade rights from Windows 8.1 Pro)***
Windows 7 Home Premium (32-bit)**
Windows 7 Home Premium (64-bit)**
Windows 7 Home Basic (32-bit)**
FreeDOS
Novell SUSE Linux Enterprise Desktop 11
*Not all features are available in all editions of Windows 8.1. Systems may require upgraded and/or
separately purchased hardware, drivers and/or software to take full advantage of Windows 8.1
functionality. See http://www.microsoft.com.
**Not all features are available in all editions of Windows 7. This system may require upgraded and/or
separately purchased hardware to take full advantage of Windows 7 functionality. See
http://www.microsoft.com/windows/windows-7/ for details.
***This system is preinstalled with Windows® 7 Pro software and also comes with a license and media for
Windows 8.1 Pro software. You may only use one version of the Windows software at a time. Switching
between versions will require you to uninstall one version and install the other version. You must back up
all data (files, photos, etc.) before uninstalling and installing operating systems to avoid loss of your
data.
PROCESSORS
Intel® 4th Generation Core™ i7 Processors
Intel® Core™ i7-4790T
Up to 3.9 GHz Max. Turbo Frequency (2.7 GHz base frequency), 8 MB cache, 4 cores, 8 threads
Intel® HD Graphics 4600
Supports DDR3 memory up to 1600 MT/s data rate
Intel® Stable Image Platform Program (SIPP)
Intel HD Graphics 4600
Intel Stable Image Platform Program (SIPP)
Page 5
QuickSpecs
3.1 GHz base frequency, 4 MB cache, 2 cores, 4 threads
Intel® Core™ i3-4330 T
Supports DDR3 memory 1600 MT/s data rate
Intel® 4th Generation Pentium® Processors
Intel® Pentium™ G3440T
Intel® HD Graphics
Intel® Pentium® G3420T
Intel HD Graphics
Intel® Pentium™ G3240T
Intel® HD Graphics
Intel® Pentium® G3220T
Intel HD Graphics
Page 6
QuickSpecs
Intel® Celeron® Processors
Intel® Celeron™ G1840T
Intel® HD Graphics
CHIPSET
Intel® H81 Express
SMBIOS
System Management BIOS, previously known as DMI BIOS, is used to store system management information.
HP BIOSphere
Key features of the HP BIOS include:
Deployment and manageability - HP BIOS provides several technologies that help integrate the HP ProOne 400 Business PC into
the enterprise, such as PXE, and F10 Setup support for 12 languages.
Support UEFI specification 2.3.1
Thermal and power management - The HP BIOS provides and enables thermal and power management technologies so
component temperatures are managed for high reliability and to assist in operating the HP Business Desktop computer in any
enterprise environment.
Thermal Controlled Fans - Automatic or manual controlled fan speeds for cooling and acoustic performance Serviceability - HP
BIOS provides diagnostic and detailed service information.
Upgrades and recovery - HP BIOS provides numerous ways to upgrade HP Business Desktop computers, including BIOS updates
from within DOS (DOSFlash), BIOS updates from within Windows (HPQFlash), HP Client Manager, and fail-safe recovery
(Emergency Boot Block Recovery). In addition, the HP Business Desktop BIOS Utilities tool enables replicated BIOS setup
throughout the Enterprise; it is available from within the BIOS F10 setup and from the support website.
HP BIOS uses PKI signing of the BIOS for trusted BIOS upgrades and recovery.
Additional HP BIOS Features:
Power-On password - Helps prevent an unauthorized user from powering on the system.
Administrator password - Also known as the setup password, this helps prevent unauthorized changes to the system
configuration. If the administrator password is not known, the BIOS version cannot be changed and changes cannot be made to
BIOS settings using F10 setup or under the OS.
Advanced Configuration and Power Interface (ACPI) - Represents a significant innovation in power and configuration
management, allowing operating systems and applications to manage power based on activity and usage. HP Pro models use
ACPI to provide power conservation features.
S5 Max Power Savings setting supports EU Lot6 requirement and allows the computer to power down below 1W is S5 (when
turned off). When S5 Max Power Savings feature is enabled power to slots is turned off along with WOL functionality.
Master Boot Record Security - Helps to prevent changes and/or infections to the Master Boot Record caused by viruses or
malicious code.
HP BIOS Protection - prevents unauthorized updates or changes to the BIOS due to malware, viruses, or malicious BIOS updates.
Based on NIST SP800-147 policy guidelines.
GRAPHICS
Integrated (depends on processor)
Intel HD Graphics: 4600 or 4400. Please see specific processors for graphics configuration.
Graphics controller
Intel® Processor Graphics
Page 7
QuickSpecs
DisplayPort
Memory
Supported Graphics APIs
Support for 1 external display
Up to 1.8GB DDR3
DX11.1, OpenGL 4.0, OpenCL 1.2, full 1080p Blu-Ray Disc (H264) playback in hardware
WIRELESS DISPLAY
WiDi support with Intel Dual Band Wireless-N 7260 (mini PCI Express) and Intel® HD graphics
Desktop system requirements for Intel® Wireless Display
System Component
Requirement
Processor
4th generation Intel® Core processor
Graphics
Intel® HD Graphics
Wireless
Intel Dual Band Wireless-N 7260
Software
Intel® My WiFi Technology and Intel® Wireless Display must be pre-installed and enabled
OS*
Windows 7 32-bit/64-bit Home Premium, Ultimate, Professional; Windows 7 32-bit Home Basic
* Windows 8.1 supports Wireless Display natively.
DISPLAY
19.5" diagonal TN widescreen WLED backlit anti-glare LCD
Display Panel
Type
Viewable image area (H x V) (mm)
Screen opening (H x V) (mm)
Resolution(H x V)
Aspect ratio
Contrast ratio (typical)
Brightness (typical)
Adjustable Tilt Stand/Tilt Angle
TN (Twisted Nematic) LED Backlit LCD
433.92 x 236.34
434.92×237.34
1600 × 900
16:9
1000:1
250nits (cd/m2)
Viewing angle (typical)
R/L 170°, U/D 160°
Pixel pitch (H x V) (mm)
0.2712 x 0.2626
Backlight lamp life (to half brightness)
30,000 hours minimum
Color support
Over 16 million colors (through FRM)
Anti-glare
Yes
Default color temperature
Warm (6500K)
NOTE: All performance specifications represent the typical specifications provided by HP's
component manufacturers; actual performance may vary either higher or lower.
10º to +25º to the vertical plane
WEBCAM & MIC
Optional integrated 1 MP webcam & dual microphone array; maximum resolution of 1280x720
STORAGE
3.5" SATA Hard Drive
500 GB, 7200 rpm, SATA 6.0 Gb/s, SMART IV
1 TB, 7200 rpm, SATA 6.0 Gb/s, SMART IV
Page 8
QuickSpecs
2.5" SATA Hard Drive
500 GB, 7200 rpm, SATA 6.0 Gb/s, SMART IV
2.5" Self-Encrypting Solid State Drive
128 GB, SATA, Self-Encrypting Opal 2 Solid State Drive
180 GB Intel Pro 1500, SATA, Self-Encrypting Opal 1 Solid State Drive
256 GB, SATA, Self-Encrypting Opal 2 Solid State Drive
2.5" Self-Encrypting Drive
500 GB, SATA, Self-Encrypting Drive
2.5" Solid State Hybrid Drive
500 GB, SATA, Solid State Hybrid Drive
1 TB SATA, Solid State Hybrid Drive
Optical Disc Drive
Slim SATA DVD-ROM
Slim SATA SuperMulti DVD Writer
Slim SATA BDXL Blu-ray Writer
No included Optical Disc Drive
Removable
HP Slim Removable SATA HDD Frame/Carrier
Media Card Reader
HP 5-in-1
Supports Secure Digital (SD, SDHC, SDXC, Memory Stick (MS), Memory Stick Pro (MS Pro))
MEMORY
Type
Non-ECC, DDR3 SDRAM, 1600 MHz, SODIMM
Maximum
16 GB
# of Slots
2
204-pin supporting dual-channel memory
Maximized dual-channel performance requires SODIMMs of the same size and speed in both memory slots.
NOTE: Full availability of 4 GB or more of memory requires a 64-bit operating system. With Windows 32-bit operating systems, the
amount of usable memory is dependent upon your configuration, so that above 3 GB all memory may not be available due to system
resource requirements.
NETWORKING/COMMUNICATIONS
Ethernet (RJ-45)
Integrated Realtek RTL8151GH-CG GbE LOM 10/100/1000
Page 9
QuickSpecs
With Wake-on-LAN
NOTE: The term "10/100/1000" or "Gigabit" Ethernet indicates compliance with IEEE standard 802.3ab for Gigabit Ethernet, and does
not connote actual operating speed of 1 Gb/s. For high-speed transmission, connection to a Gigabit Ethernet server and network
infrastructure is required.
Wireless
Intel 802.11 a/b/g/n wireless 7260 PCIe minicard (optional)
Up to 300 mbps data rate
HP 802.11 a/b/g/n wireless PCIe minicard with Bluetooth Combo (optional)
Up to 300 mbps data rate
Bluetooth 4.0 compliant
Works with a wide range of Bluetooth devices
AUDIO/MULTIMEDIA
DTS Sound +™
Realtek ALC3228 codec - 16 & 24-bit PCM
Integrated business class 2.0 speakers (2W x 2)
Stereo headphone jack
Microphone in
Stereo line out
Optional integrated 1.0 MP webcam & dual microphone array - Up to 30 frames/sec
KEYBOARDS AND POINTING DEVICES
Keyboard
HP USB Standard
HP Wireless Keyboard & Mouse
HP USB CCID SmartCard Keyboard
HP USB PS/2 Washable Keyboard
Mice
HP USB Optical Mouse
HP USB 1000dpi Laser Mouse
HP USB PS/2 Washable Scroll Mouse
104 keys plus special functions for Mute, Volume Up, Volume Down, Sleep & Multimedia control
keys
Separate numeric keypad
Cable length 71 in (180 cm)
104 keys plus special functions for Mute, Volume Up, Volume Down, Sleep
Separate numeric keypad; two buttons with scroll wheel acting as third button
Operates at ~ 2.4 GHz and supports a working distance of up to 23 ft (7m)
Keyboard contains 25% post-consumer recycled plastic material
104, 105, 106, 107, 109 layout (depending upon country)
All ISO 7816 smart cards
SpillSeal® keyboard technology protection
USB & PS/2 support in one solution
Separate numeric keypad
Cable length 7ft (2.2m)
Two buttons with scroll wheel
71 in (180 cm)
1000 dpi support
Cable length 70.8 in (180 cm)
SpillSeal® mouse technology protection
Page 10
QuickSpecs
8.8 ft total 70 cm+ 2m extension
SECURITY
Security lock slot
HP UltraSlim Cable Lock (optional)
USB port disable (configurable at factory)
Rear cover security screw
POWER
External 120W, up to 89% efficient, active PFC
100-240V AC
Power Efficiency
Volts
89%
230
88%
100/115
SOFTWARE COMPONENTS AND APPLICATIONS WITH WINDOWS
Included
Security
MultiMedia
Communication
HP Value Add
3rd Party
Windows 7
Computrace
HP Device Access Manager with Just In Time
Authentication
HP Drive Encryption
HP File Sanitizer (SSDs and Hybrid Drives not
supported)
HP Disk Sanitizer External Edition1
HP Client Security
HP Trust Circles Standard
Microsoft Security Essentials
Cyberlink Power DVD, BD
Cyberlink Power2Go (Secure Burn)
Cyberlink YouCam BE
HP ePrint Driver2
HP Manageability (activation required)
HP PageLift
HP Recovery Manager
HP Support Assistant
HP Recovery Disk Creator
Adobe Flash Player
Box
Foxit PhantomPDF Express for HP
Skype
Buy Office
Windows 8.1
Computrace
HP Device Access Manager with Just In Time
Authentication
HP Drive Encryption
HP File Sanitizer (SSDs and Hybrid Drives not
supported)
HP Disk Sanitizer External Edition1
HP Client Security
HP Trust Circles Standard
Microsoft Defender
Cyberlink Power DVD, BD
Cyberlink Power2Go (Secure Burn)
HP Wireless Hotspot
HP ePrint Driver2
HP Manageability (activation required)
HP PageLift
HP Recovery Manager
HP Support Assistant
Box
Foxit PhantomPDF Express for HP
Skype
Microsoft Products
Buy Office
1 Available via download.
2 Requires an Internet connection to HP web-enabled printer and HP ePrint account registration (for a list of eligible printers, supported
documents and image types and other HP ePrint details, see www.hp.com/go/eprintcenter).Requires optional broadband module.
Broadband use requires separately purchased service contract. Check with service provider for coverage and availability in your area.
Separately purchased data plans or usage fees may apply. Print times and connection speeds may vary.
Page 11
QuickSpecs
ENVIRONMENTAL & INDUSTRY
ENERGY STAR® qualified models available
EPEAT® registered where applicable/supported. See www.epeat.net for registration status by country.
Industry standard certifications:
UL
CSA
FCC compliance
ENERGY STAR®
EPEAT® Gold
EUP Lot6 Tier2
CCC
CECP
SEPA
CEL
For accessibility information on HP products, please visit: http://www.hp.com/accessibility.
WEIGHTS & DIMENSIONS
Weight
With stand
12.2 - 12.9 lbs
5.55 - 5.84 kg
Without stand
11.2 - 11.8 lbs
5.07 - 5.36 kg
Shipping box
18.9 lbs
8.58 kg
Dimensions
(W x D x H)
Shipping pallet (50 units)
967.8 lbs
439 kg
With stand
19.5 x 3 x 13.5 in
494.9 x 77 x 342.7 mm
Without stand
19.5 x 2 x 13.4 in
494.9 x 52 x 339.4 mm
Shipping box
23.3 x 7.6 x 17.6 in
591x 193 x 448 mm
Shipping pallet (50 units)
47.2 x 39.4 x 93.3 in
1200 x 1000 x 2370 mm
Detailed dimensions
Page 12
QuickSpecs
TEMPERATURE, HUMIDITY, ALTITUDE
Temperature
Operating
Non-operating
Relative humidity
Altitude
(unpressurized)
Operating
Operating
Non-operating
41 to 95°F
5 - 35°C
-22 to 149°F
-30° to 65°C
15 - 80% at 26° C
0 to 6500 ft (0 to 2000 m)
0 to 15,000 ft (0 to 4,572 m)
PORTS
I/O Ports - Standard
2 - USB 3.0 (2 side including 1 fast charging)
USB Fast Charging Port:
Up to 2.5A charging current (5 times the maximum current supported by a USB 2.0 port; 2.8 times the maximum current
supported by a USB 3.0 port)
D+/D- CDP/DCP Modes per USB Battery Charging Specification 1.2
D+/D- Shorted Mode per Chinese Telecommunication Industry Standard YD/T 1591-2009
Supports non-BC1.2 Charging Modes by Automatic Selection
D+/D- Divider Modes 2.0V/2.7V and 2.7/2.0V
D+/D- 1.2V Mode
Supports Sleep-Mode Charging
Automatic SDP/CDP Switching for Devices That do not Connect to CDP Ports
4 - USB 2.0 (rear)
Page 13
QuickSpecs
1 - Microphone in (side)
1 - Headphone jack (side)
1 - Serial RS-232 (rear)
1 - Stereo audio line out (rear)
1 - Power connector (rear)
1 - RJ-45 (rear)
1 - DisplayPort
DisplayPort connector supports multimode technology to support connection to DVI-D, HDMI and VGA monitors with optional adapters
or to a DisplayPort monitor with a DisplayPort Cable.
DisplayPort Cable
Provides a direct connection between the PC's DisplayPort interface to the display's DisplayPort
interface
DisplayPort To DVI-D Adapter
Provides a connection from the PC's DisplayPort interface to the display's DVI-D interface;
adapts the DP output to the DVI-D input
DisplayPort To HDMI Adapter
Provides a connection from the PC's DisplayPort interface to the display's HDMI interface;
adapts the DP output to the HDMI input
DisplayPort To VGA Adapter
Provides a connection from the PC's DisplayPort interface to the display's analog VGA interface;
adapts the digital DP output to the analog VGA input
SLOTS
1 - mini PCIe half-length (used by optional wireless LAN module)
BAYS
1 - 3.5" internal; Supports One - 3.5" hard drive or up to One - 2.5" hard drives (HDD/SSD/SED/SSHD)
1 - 5.25" external; Slim Line Optical Drive
SERVICE AND SUPPORT
On-site Warranty1: Standard three-year (3-3-32) limited warranty delivers three years of on-site, next business day3 service for parts
and labor and includes free telephone support4 24 x 7. One-year onsite and labor are not available in all countries. Service offers terms
up to 5 years by choosing a Care Pack. To choose the right level of service for your HP product, visit HP Care Pack Central:
www.hp.com/go/cpc
NOTE 1: Terms and conditions may vary by country. Certain restrictions and exclusions apply. Other warranty variations may be offered
in your region.
NOTE 2: One-year (1/1/1) in Mexico only.
NOTE 3: On-site service may be provided pursuant to a service contract between HP and an authorized HP third-party provider, and is
not available in certain countries. Global service response times are based on commercially reasonable best effort and may vary by
country.
NOTE4: Technical telephone support applies only to HP-configured Compaq and third-party HP qualified hardware and software. Tollfree calling and 24 x 7 support may not be available in some countries.
Page 14
QuickSpecs
Technical Specifications - Graphics
Intel HD Graphics
VGA Controller
DisplayPort
Bus Type
RAMDAC
Memory
Maximum
Graphics
Memory
Integrated
Multimode capable; supports HDCP, Display Port Audio (2 streams), HBR2 link rates
N/A
N/A
Intel graphics do not have dedicated memory but utilizes some of the computer's system memory The amount of memory
used for graphics depending on the amount of system memory installed, BIOS settings, operating system, and system load.
32 MB is pre-allocated for graphics use at system boot time. Additional memory can be allocated at boot time by the BIOS
for PAVP (Protected Audio Video Playback) support for playback of protected video content.
Additional memory is allocated for graphics as needed using Intel's Dynamic Video Memory Technology (DVMT), to provide
an optimal balance between graphics and system memory use.
Microsoft Windows 7
Windows 8.1
Up to 1.7GB
Up to 1.8GB
NOTE: the actual amount of maximum graphics memory can be less than the amounts listed above depending upon your
computer's configuration.
32 bits/pixel
Maximum
Color Depth
Graphics/Video 4th Generation Core processors:
API Support
The Processor Graphics contains a refresh of the seventh generation graphics core enabling substantial gains in
performance and lower power consumption. Up to 16 EU support.
Next Generation Intel Clear Video Technology HD Support is a collection of video playback and enhancement
features that improve the end user's viewing experience
Encode/transcode HD content
Playback of high definition content including Blu-ray Disc
Superior image quality with sharper, more colorful images
DirectX Video Acceleration (DXVA) support for accelerating video processing
Full AVC/VC1/MPEG2 HW Decode
Advanced Scheduler 2.0, 1.0
Windows 7, Windows 8.1, Linux OS Support
DirectX 11.1
OpenGL 4.0
Open CL 1.2
Supported Display Resolutions and Refresh Rates
NOTE: other resolutions may be available but are not recommended as they may not have been tested and qualified by HP
Resolution
Refresh Rates
800x600
60 Hz
1024x768
60 Hz
1152x864
60 Hz
1280x600
60 Hz
1280x720
60 Hz
1280x800
60 Hz
1280x960
60 Hz
1280x1024
60 Hz
1360x768
60 Hz
1366x768
60 Hz
1400x1050
60 Hz
1440x900
60 Hz
Page 15
QuickSpecs
Technical Specifications - Graphics
1600x900
1600x1200*
1680x1050
1920x1080
1920x1200*
1920x1440*
2560x1440*
2560x1600*
* Only supported on displays connected to the external DisplayPort connector.
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Page 16
QuickSpecs
Technical Specifications – Hard Disk and Solid State Storage
Introduction:
HP Serial Advanced Technology Attachment (SATA) Hard Drives maximize the performance of HP Business PCs by providing the
technologies to meet your increasing storage demands with high-capacity drives offering superior reliability and performance.
SATA provides faster data transfer speeds, better system cooling airflow, more bandwidth, more headroom for speed increases in
future generations and better data integrity. A next-generation technology, the SATA interface connects hard drives to the PC
platform enabling easy aggregation of multiple hard drives into a single PC. This offers you the additional benefits of dedicated
bandwidth, the ability to more easily identify device failures and scalability. The HP ProOne 400 G1 Series Business PC supports the
latest SATA 6.0Gb/s specification.
SMART IV Technology
Self Monitoring Analysis and Reporting Technology (SMART) hard drive technology allows hard drives to monitor their own health and
to raise flags if imminent failures are predicted. If the drive determines that a failure is imminent, the SMART hard drive technology
enables the intelligent manageability or management software to generate a fault alert. While the current versions of SMART hard
drives do a good job monitoring the data on the hard drive media, the ever increasing emphasis on reliability and quality has promoted
HP to implement SMART IV technology which constantly checks that the data flow from host interface to media and media to host
interface is not compromised. This is accomplished by inserting a 2 byte parity code into every 512 byte block in the data path of the
hard drive's Cache RAM. This unique parity checking performed by HP's SMART IV technology hard drives, allows for more complete
error detection coverage encompassing the entire data path between the host and the hard drive.
Smart IV is also known as IOEDC: I/O Error Detection Code.
Native Command Queuing
NCQ or Native Command Queuing is a SATA protocol extension that allows the hard drive to have several write or read commands
outstanding at the same time. In contrast, normal non-queued operation requires each command to be completed before the next
command is issued by the host system. Queuing allows the drive to complete the commands in the order that allows for best overall
throughput. It also involves an advanced method of transferring data to or from the host, called First Party Direct Memory Access
(FPDMA), which allows the hard drive and the host controller to manage the data transfers for multiple outstanding commands,
without involving the host processor. NCQ can contribute to better performance but the results are dependent on many factors,
including the access patterns of the various applications and operating system functions that are initiating drive accesses. Enabling
NCQ features in the hard drive requires AHCI support from the host system BIOS, controller, and driver. AHCI support is typically
implemented in RAID configurations
NOTE: GB = 1 billion bytes. Actual available capacity is less.
HP 500-GB 7.2K rpm SATA 6.0Gb/s 3.5” Hard Disk Drive
Capacity
Rotational Speed
Interface
Buffer Size
Logical Blocks
Seek Time (typical reads,
includes controller overhead,
including settling)
Height (nominal)
Width (nominal)
Operating Temperature
500,107,862,016 bytes
7,200 rpm
SATA 6 Gb/s
16 MB
976,773,168
Single Track:
2.0 ms
Average:
11 ms
Full-Stroke:
21 ms
1 in/2.54 cm
Media diameter: 3.5 in/8.89 cm
Physical size: 4 in/10.2 cm
41° to 131° F (5° to 55° C)
Page 17
QuickSpecs
HP 1-TB 7.2K rpm SATA 6.0Gb/s 3.5" Hard Disk Drive
Capacity
Rotational Speed
Interface
Buffer Size
Logical Blocks
including settling)
Height (nominal)
Width (nominal)
1,000,204,886,016 bytes
7,200 rpm
SATA 6 Gb/s
32 MB
1,953,525,168
Single Track:
2.0 ms
Average:
11 ms
Full-Stroke:
21 ms
1 in/2.54 cm
Media diameter: 3.5 in/8.89 cm
Physical size: 4 in/10.2 cm
41° to 131° F (5° to 55° C)
HP 500-GB 7.2K SATA 6.0Gb/s 2.5" Hard Disk Drive
Capacity
Rotational Speed
Interface
Buffer Size
Logical Blocks
including settling)
Height (nominal)
Width (nominal)
500,107,862,016 bytes
7,200 rpm
SATA 6 Gb/s
16 MB
976,773,168
Single Track:
2.0 ms
Average:
12 ms
Full-Stroke:
25 ms
0.374 in/9.5 mm
Media diameter: 2.5 in/63.5 mm
Physical size: 2.75 in/70 mm
41° to 131° F (5° to 55° C)
HP 128 GB SATA 2.5" Self-Encrypting (SED) Solid State Drive
Unformatted Capacity
Architecture
Interface
Height
Width
Length
Weight
Performance
128 GB
Self-Encrypting (SED) Solid State Drive using NAND Flash and SATA interface
SATA 6 Gb/s
.267 in/6.80 mm
2.75 in/69.85 mm
3.94 in/100.2 mm
0.121 lb (55 g) max
Host Transfer Rate:
600 MB/s
Sequential Read:
Up to 520 MB/s
Sequential Write:
Up to 340 MB/s
* Actual performance may vary depending on use conditions and
environment
** NOTES:
1. Measured at HP 8570p@Win7 x64
2. Performance measured using CrystaldiskMark 3.01c
3. Drive was connected as primary
Page 18
QuickSpecs
Power
System Reliability
Environmental
(all conditions, non-condensing)
System power consumption:
Active* - 0.78A / 3.891W (typical)
Idle** - 0.005A / 0.026W (typical)
* Active power is measured during execution of IOMeter 2006 in Windows 7
** Idle power is measured on DOS Idle status with DIPM on
MTBF - 1,500,000 Hours
Operating Temperature:
32° to 158° F (0° to 70° C)
Relative Humidity:
5% to 95%
Shock:
1500G, duration 0.5ms, Half Sine Wave
HP 256 GB SATA 2.5" Self-Encrypting (SED) Solid State Drive
Unformatted Capacity
Architecture
Interface
Height
Width
Length
Weight
Performance
Power
System Reliability
Environmental
(all conditions, non-condensing)
256 GB
Self-Encrypting (SED) Solid State Drive using NAND Flash and SATA interface
SATA 6 Gb/s
.267 in/6.80 mm
2.75 in/69.85 mm
3.94 in/100.2 mm
0.121 lb (55 g) max
Host Transfer Rate:
600 MB/s
Sequential Read:
Up to 520 MB/s
Sequential Write:
Up to 460 MB/s
* Actual performance may vary depending on use conditions and
environment
** NOTES:
1. Measured at HP 8570p@Win7 x64
2. Performance measured using CrystaldiskMark 3.01c
3. Drive was connected as primary
Active* - 0.78A / 3.891W (typical)
Idle** - 0.005A / 0.026W (typical)
* Active power is measured during execution of IOMeter 2006 in Windows 7
** Idle power is measured on DOS Idle status with DIPM on
MTBF - 1,500,000 Hours
Operating Temperature:
32° to 158° F (0° to 70° C)
Relative Humidity:
5% to 95%
Shock:
1500G, duration 0.5ms, Half Sine Wave
HP 500-GB 7200 RPM SATA 2.5" Self-Encrypting (SED) Hard Disk Drive
Capacity
Rotational Speed
Drive Type
Interface
Segmented Buffer with write
cache
Number of Sectors
Seek Time (typical reads)
500,107,862,016 bytes
7,200 rpm
Self-Encrypting Drive (SED) with SATA interface
SATA 6 Gb/s
32768 KB - A portion of buffer capacity used for firmware
976,773,168
Single Track:
Average:
Full-Stroke:
1.0 ms
13 ms
25 ms
Page 19
QuickSpecs
Media Diameter
Height
Width
Length
Weight
2.5 in/63.5 mm
0.267 in/6.8 mm, ±0.2mm
2.75 in/69.85 mm, ±0.25mm
3.945 in/100.2 mm, ±0.25mm
3.35 oz/95 g (max)
32° to 140° F (0° to 60° C)
HP 500 GB SATA 6G 2.5" 8GB Solid State Hybrid Drive (SSHD)
Formatted Capacity
Spindle Speed
Drive Type
Interface
Cache Buffer
NAND Flash
Commercial Multilevel Cell
(cMLC)
Number of Sectors
Height
Width
Length
Weight
500 GB
5,400 rpm +/- 0.2%
Solid State Hybrid Drive (SSHD) technology with NAND Flash
SATA 6 Gb/s
64 MB
8 GB
976,773,168
Single Track:
2.0 ms
Average:
12 ms
0.268 +/-.008 in (6.8 +/- 0.2 mm)
2.750 +/- 0.010 in (69.85 +/- 0.25 mm)
3.951 +0.008 / -0.010 in (100.35 +0.20 / -0.25 mm)
0.209 lb/95 g (max)
32° to 140° F (0° to 60° C)
HP 1-TB SATA 6G 2.5" 8GB Solid State Hybrid Drive (SSHD)
Formatted Capacity
Spindle Speed
Drive Type
Interface
Cache Buffer
NAND Flash
Commercial Multilevel Cell
(cMLC)
Number of Sectors
Height
Width
Length
Weight
1 TB
5,400 rpm +/- 0.2%
Solid State Hybrid Drive (SSHD) technology with NAND Flash
SATA 6 Gb/s
64 MB
8 GB
976,773,168
Single Track:
2.0 ms
Average:
12 ms
0.374 +/-.008 in (9.5 +/- 0.2 mm)
2.750 +/- 0.010 in (69.85 +/- 0.25 mm)
3.951 +0.008 / -0.010 in (100.35 +0.20 / -0.25 mm)
0.254 lb/115 g (max)
32° to 140° F (0° to 60° C)
Page 20
QuickSpecs
Technical Specifications - Removable Storage
HP Slim SuperMulti DVD Writer Drive
Height
12.7mm height
Orientation
Either horizontal or vertical
Interface type
SATA/ATAPI
Disc recording capacity
Up to 8.5 GB DL or 4.7 GB standard
Dimensions (W x H x D)
5.0 x 0.5 x 5.0 in (128 x 13.6 x 129 mm)
Weight (max)
0.42 lb (190 g)
Write speeds
Read speeds
Access time
(typical reads, including settling)
Power
Environmental conditions
(operating - non-condensing)
DVD-RAM
Up to 5X
DVD-R DL
Up to 6X
DVD+R
Up to 8X
DVD+RW
Up to 8X
DVD+R DL
Up to 6X
DVD-R
Up to 8X
DVD-RW
Up to 6X
CD-R
Up to 24X
CD-RW
Up to 24X
DVD-RAM
Up to 5X
DVD-RW, DVD+RW
Up to 8X
DVD-R DL, DVD+R DL
Up to 8X
DVD+R, DVD-R
Up to 8X
DVD-ROM DL, DVD-ROM
Up to 8X
CD-ROM, CD-R
Up to 24X
CD-RW
Up to 24X
Random
DVD-ROM: 170 ms (typical), CD-ROM: 170 ms (typical)
Full Stroke
Stop Time
6 seconds typical
Source
Slimline SATA DC power receptacle
DC Power Requirement
5 VDC ± 5%-100 mV ripple p-p
DC Current
5 VDC (< 1000 mA typical, 1600 mA maximum)
Temperature
41° to 122° F (5° to 50° C)
Relative Humidity
10% to 90%
Maximum Wet Bulb Temperature
84° F (29° C)
Page 21
QuickSpecs
HP Slim Blu-ray BDXL Drive
Height
12.7mm height
Orientation
Interface type
SATA/ATAPI
Disc recording capacity
Up to 128 GB QL, 100 GB TL, 50 GB DL or 25 GB standard SL
5.04 x 0.5 x 5.0 in (128 x 12.7 x 127 mm) without bezel
Weight (max)
Up to 0.37 lb (170 g) without bezel
Write speeds
Read speeds
Triple-layer
Quadruple-layer
BD-R
Up to 4X
Up to 4X
BD-RE
Up to 2X
Not supported
Single-layer
Double-layer
BD-R
Up to 6X
Up to 6X
BD-RE
Up to 2X
Up to 2X
DVD-R
Up to 8X
Up to 6X
DVD-RW
Up to 6X
Not supported
DVD+R
Up to 8X
Up to 6X
DVD+RW
Up to 8X
Not supported
DVD-RAM
Up to 5X
N/A
CD-R
Up to 24X
N/A
CD-RW
Up to 24X
N/A
Triple-layer
Quadruple-layer
BD-R
Up to 4X
Up to 4X
BD-RE
Up to 4X
Not supported
Single-layer
Double-layer
BD-ROM
Up to 6X
Up to 6X
BD-R
Up to 6X
Up to 6X
BD-RE
Up to 6X
Up to 6X
DVD-ROM
Up to 8X
Up to 8X
DVD-R
Up to 8X
Up to 8X
DVD-RW
Up to 8X
N/A
DVD+R
Up to 8X
Up to 8X
DVD+RW
Up to 8X
N/A
Page 22
QuickSpecs
Access time
Power
Environmental conditions
(operating - non-condensing)
BDMV (AACS Compliant Disc)
Up to 6X/2X (Read/Play)
N/A
DVD-RAM
Up to 5X
N/A
DVD-Video (CSS Compliant Disc)
N/A
CD-R/RW/ROM
Up to24X
N/A
CD-DA(DAE)
N/A
Random
BD-ROM: 205 ms (typical), DVD-ROM: 185 ms (typical),
CD-ROM: 165 ms (typical)
Full Stroke
BD-ROM: 350 ms (typical), DVD-ROM: 345 ms (typical),
CD-ROM: 340 ms (typical)
Source
DC Current
5 VDC -1200 mA typical, 2000 mA maximum
Temperature
41° to 122° F (5° to 50° C)
Relative Humidity
10% to 80%
Maximum Wet Bulb Temperature 84° F (29° C)
HP Slim DVD-ROM Drive
Height
12.7mm
Orientation
Interface type
SATA/ATAPI
5.04 x 0.5 x 5.0 in (128 x 12.7 x 127 mm) without bezel
Weight (max)
Up to 0.37 lb (170 g) without bezel
Read speeds
Access time
Power
Environmental (all conditions
non-condensing)
DVD+R/-R/+RW/
-RW/+R DL /-R DL
Up to 8X
DVD-ROM
Up to 8X
CD-ROM, CD-R
Up to 24X
CD-RW
Up to 24X
Random
Full Stroke
Source
DC Current
5 VDC - <1000 mA typical, < 1600 mA maximum
Temperature
41° to 122° F (5° to 50° C)
Relative Humidity
10% to 80%
Maximum Wet Bulb Temperature
(operating)
84° F (29° C)
Page 23
QuickSpecs
Page 24
QuickSpecs
Technical Specifications – Memory
System Memory Support
The HP ProOne 400 G1 Business PC supports the 4th generation Intel® Core™ processor family. Based on a new PC micro-architecture,
the processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH). Unlike previous
generations, the 4th generation Intel® Core™ processor includes an Integrated Memory Controller (IMC). The IMC supports
DDR3/DDR3L protocols with two independent, 64-bit wide channels each accessing one or two DIMMs.
Two channels of DDR3/DDR3L unbuffered small outline dual in-line memory modules (SO-DIMM) with a maximum of two
DIMMs per channel
Single-channel and dual-channel memory organization modes
Data burst length of eight for all memory organization modes
Memory data transfer rates of up to 1600 MT/s; actual supported data transfer rate determined by the configured processor.
64-bit wide channels
DDR3/DDR3L system memory I/O voltage of 1.5V
Theoretical maximum memory bandwidth of:
21.3 GB/s in dual-channel mode assuming 1333 MT/s
25.6 GB/s in dual-channel mode assuming 1600 MT/s
Platform Memory Support
The All-in-One supports up to two (2) industry-standard DDR3-SDRAM SO-DIMMs.
CAUTION: You must shut down the computer and disconnect the power cord before adding or removing memory modules. Regardless
of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to an active AC outlet.
Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system
board.
NOTE: For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available due to
system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.
Page 25
QuickSpecs
Technical Specifications - Networking/Communication
Realtek RTL8151GH-CG GbE LOM Network Adapter
Connector
System Interface
Controller
Memory
Data rates supported
IEEE Compliance
Bus architecture
Data transfer mode
Power requirement
Network transfer mode
Network transfer rate
Environmental
Management
RJ-45
Integrated on PCA
Realtek RTL8151GH-CG Gigabit Ethernet Controller
16 KB FIFO packet buffer memory
10/100/1000 Mbps
802.1P
802.1Q
802.3
802.3ab
802.3az
802.3u
PCI Express
PCIe-based interface for active state operation (S0 state)
Requires 3.3V and 1V or just 3.3V with integrated regulators
Power consumption 0.425 W
Full-duplex
Half-duplex (not supported for the 1000BASE-T transceiver)
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Operating Temperature: 32° to 158° F (0° to 70° C )
Operating Humidity: 60% RH
WOL, auto MDI crossover, PXE, Muti-port teaming, Advanced cable diagnostic
Intel Dual Band Wireless-N 7260 802.11 a/b/g/n (2x2) Wireless Network Interface Connection
Wireless LAN Standards
Interoperability
Frequency Band
Antenna Structure
Data Rates
Modulation
IEEE 802.11a/b/g/n
Wi-Fi certified (802.11 a/b/g/n WMM, WPA, WPA2 and WPS)
Cisco Compatible Extensions Program compliant with Microsoft Windows 7, Windows Vista and XP.
NOTE: WLAN supplier's client utility is required for Cisco Compatible Extensions support with Microsoft
Windows XP. WLAN may also be compatible with certain third-party software supplicants. WLAN
supplier IHV extensions required for Cisco Compatible Extensions support for Microsoft Windows
Vista.
802.11b/g/n
2.402-2.482 GHz
802.11a/n
4.9 - 4.95 GHz (Japan)
5.15 - 5.25 GHz
5.25 - 5.35 GHz
5.47 - 5.725 GHz
5.825 - 5.850 GHz
2 transmit; 2 receive (2x2)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: MCS 0 ~ MCS 15, (20MHz, and 40MHz)
Direct Sequence Spread Spectrum
Page 26
QuickSpecs
CCK, BPSK, QPSK, 16-QAM, 64-QAM
IEEE and WiFi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES.
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through CCX4 and CCX Lite
WAPI
Security
NOTE: Check latest software/driver release for updates on supported security features.
Multinational support with frequency bands and channels compliant to local regulations.
Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
IEEE 802.11 compliant roaming between band Access Points
2.4G: +13.5dBm minimum
5G: +12dBm minimum
Sub-channels
Network Architecture Models
Roaming
Output Power
Power Consumption
Power Management
Receiver Sensitivity
NOTE: Receiver sensitivity is
measured at a packet error rate of
8% for 802.11b (CCK modulation) and
a packet error rate of 10% for
802.11a/g (OFDM modulation).
Antenna Connections
Form Factors
Weight
Dimensions
Operating Voltage
Temperature
Humidity
Altitude
LED Activity
NOTE: Maximum output power may vary by country according to local regulations.
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode: 250 mW (WLAN associated) In Power Save Polling mode and on battery power.
Idle mode: 100 mW (WLAN unassociated)
Radio off: 100 mW (WLAN unassociated)
ACPI compliant power management
802.11 compliant power saving mode
802.11g:-90 dBm (6 Mbps), -89 dBm (9 Mbps), -87 dBm (12 Mbps), -85 dBm (18 Mbps), -82 dBm (24
Mbps), -79 dBm (36 Mbps), -76 dBm (48 Mbps), -74 dBm (54 Mbps)
802.11b:-95 dBm (1 Mbps), -93 dBm (2 Mbps), -91 dBm (5.5 Mbps), -88 dBm (11 Mbps)
802.11g:-90 dBm (6 Mbps), -89 dBm (9 Mbps), -87 dBm (12 Mbps), -85 dBm (18 Mbps), -82 dBm (24
Mbps), -79 dBm (36 Mbps), -76 dBm (48 Mbps), -74 dBm (54 Mbps)
2 U.FL type connectors (output impedance of 50 ± 2 ohms)
PCI-Express Half-MiniCard
0.0068 lb (3.1 g)
0.12 x 1.06 x 1.18 in (3.1 x 26.8 x 30.0 mm)
3.3V +/- 9%
Operating:
14° to 158° F (-10° to 70° C)
Non-operating:
-40° to 176° F (-40° to 80° C)
Operating:
10% to 90% (non-condensing)
Non-operating:
5% to 90% (non-condensing)
Operating:
0 to 10,000 ft (3,048 m)
Non-operating:
0 to 50,000 ft (15,240 m)
LED Amber - Radio OFF; LED White - Radio ON
HP 802.11a/b/g/n Wireless Minicard with Bluetooth Combo
Dimensions (L x H)
Chipset
1.18 x 1.06 in (30 x 26.8 mm)
Broadcom BCM43228 + BCM20702
Page 27
QuickSpecs
System interface
Network standard
Frequency band
Operating temperature
Storage temperature
Humidity
Operating voltage
PCI Express x1
802.11 a/b/g/n
Bluetooth: 2.402 - 2.480 GHz
Wi-Fi: 802.11a - 5.15-5.85 GHz; 802.11bg 2.412-2.4835 GHz
32° to 131°F, operating (0° to 55°C, operating)
-40° to 176°F, non-operating (-40° to 80°C, non-operating)
5-90% operating
5-95% non-operating
3.3 V ±9% I/O supply voltage
Platform/WLAN Mode
Power Consumption
Wi-Fi
Tx Mode
Rx Mode
Bluetooth
Tx Mode
Rx Mode
Standby Mode
Output Power
(2x2 - Tolerance +/- 1.5 dBm )
Radio Off
802.11 a
802.11 b
802.11 g
802.11 n/2.4G
802.11 n/5G
Security
Antenna
Power Consumption
515 mA
425 mA
40 mA
38 mA
Wi-Fi + Bluetooth - 165 mA
Wi-Fi only - 165 mA
Bluetooth only - 0.5 mA
77 mA
15.5 dBm@6Mbps; 15.5 dBm@54Mbps
18.5 dBm@11Mbps
16.5 dBm@6Mbps; 16.5 dBm@54Mbps
20MHz: 18 dBm@MCS0; 18 dBm@MCS15
40MHz: 17 dBm@MCs0; 17 dBm@MCS15
20MHz: 16 dBm@MCS0; 16 dBm@MCS15
40MHz: 16 dBm@MCs0; 16 dBm@MCS15
IEEE 802.11i 64-/128-bit WEP encryption
WPS, WPA, WPA2, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11i
Dual antenna connectors
Page 28
QuickSpecs
Technical Specifications - Audio
Realtek ALC3228 High Definition Audio
Type
HD Stereo Codec
Ports
Internal Speaker Amplifier
Sampling
Analog Audio
# of Channels on Line-Out
Internal Speaker
Integrated
Realtek ALC3228 4-channel codec
Line-In/Microphone input ports are 47K (nominal) at the pin
Line-Out intended to drive an external 10K load (nominal) and an on board shunt resistor of 20-47K
(nominal)
Headphone-Out designed to drive 32 ohm (nominal) headphones or a 10K (nominal) load
All ports are 3.5 mm
2.2W/channel Class-D stereo BTL speaker amplifier@ 4 ohms and 5V
The ALC3228 audio CODEC provides stereo 24- bit, full duplex resolution supporting sample rates up to
192kHz by the DAC and ADC. Additional sample rates are supported by the driver software.
Yes
4 Channels (2 stereo DACs and 2 stereo ADCs) with 24-bit resolution
Yes
Page 29
QuickSpecs
Technical Specifications – Keyboards and Mice
HP USB Keyboard
Physical characteristics
Electrical
Mechanical
Environmental
Keys
104, 105, 106, 107, 109 layout (depending upon country)
Dimensions
(L x W x H)
18.12 x 6.47 x 0.96 in (46.03 x 16.43 x 2.44 cm)
Weight
2 lb (0.9 kg)
Operating voltage
+ 5VDC ± 5%
Power consumption
50-mA maximum (with three LEDs ON)
System interface
USB Type A plug connector
ESD
CE level 4, 15-kV air discharge
EMI - RFI
Conforms to FCC rules for a Class B computing device
Microsoft® PC 99 - 2001
Functionally compliant
Keycaps
Low-profile design
Switch actuation
55-g nominal peak force with tactile feedback
Switch life
20 million keystrokes (using Hasco modified tester)
Switch type
Contamination-resistant switch membrane
Key-leveling mechanisms
For all double-wide and greater-length keys
Cable length
6 ft (1.8 m)
Microsoft PC 99 - 2001
Mechanically compliant
Acoustics
43-dBA maximum sound pressure level
50° to 122° F (10° to 50° C)
Non-operating temperature
-22° to 140° F (-30° to 60° C)
Operating humidity
10% to 90% (non-condensing at ambient)
Non-operating humidity
Operating shock
40 g, six surfaces
Non-operating shock
80 g, six surfaces
Operating vibration
2-g peak acceleration
Non-operating vibration
Drop (out of box)
26 in (66 cm) on carpet, six-drop sequence
Drop (in box)
42 in (107 cm) on concrete, 16-drop sequence
Approvals
UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC
Ergonomic compliance
ANSI HFS 100, ISO 9241-4, and TUVGS
Kit contents
Keyboard
Installation Guide
Warranty Card
Safety and Comfort Guide
Page 30
QuickSpecs
HP Wireless Keyboard and Mouse
Dimensions (H x L x W)
Keyboard
Weight – Without Two AA Alkaline 1.94 lb (880 g)
Batteries
Mouse
Receiver
1.09 x 18.1 x 6.47 in (27.87 x 460.3 x 164.3 mm
1.46 x 4.53 x 2.47 in (37 x 115 x 62.9 mm)
Weight – Without Two AA Alkaline 0.15 lb (67 g)
Batteries
0.33x 1.79 x 0.72 in (8.4 x 45.5 x 18.4 mm)
Weight
0.21 oz (5.9 g)
Cable Length – Minimum
6 ft (1.8 m)
Range
32.8 ft (10 m)
Windows 7 Home Basic*, Windows 7 Home Premium*, Windows 7 Professional Edition 32*, Windows 7
Professional Edition 64*, Windows 7 Ultimate Edition 32*, Windows 7 Ultimate Edition 64* Windows
Vista or Windows XP
Available USB port for the receiver
CD-ROM Drive
*This system may require upgraded and/or separately purchased hardware and/or a DVD drive to install
the Windows 7 software and take full advantage of Windows 7 functionality. See
http://www.microsoft.com/windows/windows-7/ for details.
System Requirements
Environmental
Product Safety
UL; CSA /TUV (Europe only); CE Mark; CB Report
Ergonomics
ANSI; ISO (Europe only); GS Mark (Germany only)
EMC
FCC; CE; ACA (-tick); BSMI; KC ; VCCI
CE Mark
EN 55022:2010; EN 55024; EN 301489-1; EN 61000
Design Guidelines for PCs
PC 99 - connector overmold colors; PC 2001 - full functionality
Telecom
All local telecom requirements and approvals for intended markets
USA
FCC Title 47 CFR, Par 15, Subpart C; other local requirements
Country Support
US, Belgium, Switzerland, Spain, Denmark, Netherlands, France,
Germany, Italy, Portugal, Sweden, Norway, Finland, UK, Poland,
Czech Republic, Turkey, Greece, Austria, Bulgaria, Cyprus, Estonia,
Hungary, Ireland, Latvia, Lithuania, Luxemburg, Malta, Romania,
Slovakia, Slovenia, Vietnam, HK, Australia, NZ, Malaysia, Singapore,
Indonesia, Philippines, Thailand, Canada, China, Japan, Korea,
Taiwan, India, Venezuela, Ecuador, Russia, Ukraine, Israel, Croatia,
United Arab Emirates, Peru, Brazil, Chile, Argentina, Mexico, South
Africa, and up to 193 countries worldwide.
Keyboard contains 25% post-consumer recycled plastic material
HP USB Smart Card (CCID) Keyboard
Introduction:
Boost your security, simplify access procedures and reduce the costs associated with managing networks by preventing unauthorized access
to your computers and networks using smartcard technology with the HP Smart Card (CCID) Keyboard.
Page 31
QuickSpecs
The USB Smart Card (CCID) Keyboard is a full-sized keyboard that takes advantage of digital signatures and certificates to secure the
environment for transactions performed on both public and private networks. The USB Smart Card (CCID) Keyboard works with all smart
cards that comply with ISO standard 7816.
Smart cards are easy-to-use credit card-sized devices which require multiple forms of information to be validated before you gain access to
your accounts or resources. Used worldwide, smart cards strengthen access to a network or other resource using dual-factor authentication.
Implementing a two-factor authentication (or multi-factor authentication) process reduces the risk of unauthorized access by verifying and
validating your identity in one of the following ways:
Something you know – a combination of username and password or PIN
Something you have – a smart card or security token.
Something you have (smart card) plus something you know (PIN), improves user-access security within corporate network environments.
Smart cards are used in government agencies, healthcare companies and the finance industry.
HP ProtectTools Smart Card Manager provides authentication software for the smart card. The Smart Card Reader module works with the HP
ProtectTools Security Manager and enables the user to setup, use, and manage the smart card. This allows strengthened security with HP
patented technology.
Protects against unauthorized access with smart card technology
Delivers even greater security when combined with a HP ProtectTools smart card and the HP
ProtectTools Security Software
Combination of username and password or pin with a smart card or security token
Key Benefits:
Secures online transactions using digital signatures and certificates
Conforms to industry standards for ease of setup and use
Delivers long product life and quiet operation with high-impact materials and lubricated keys
Spill drain feature
Keys
Physical Characteristics
Electrical
Mechanical
Form factor
Colors
Dimensions
(H x W x D)
Weight
Operating voltage
Power consumption
System interface
ESD
EMI - RFI
Languages
Keycaps
Switch actuation
Switch life
Switch type
Cable length
Acoustics
104, 105, 106, 107, 109 layout
(depending upon country
USB basic smart card keyboard
Carbonite/Silver
18.2 x 6.3 x 1.3 in (46.3 x 16.1 x 3.3 cm)
2 lb (0.9 kg) minimum
+ 5VDC ± 5%
100-mA maximum (with four LEDs ON)
30+ available
Standard design
55 g nominal peak force with tactile feedback
20 million keystrokes
(using Hasco modified tester)
Contamination-resistant membrane
6 ft (1.8 m)
50° to 122° F (10° to 50° C)
Page 32
QuickSpecs
Environmental
SmartCard Function
Approvals
Ergonomic Compliance
Kit Contents
Operating humidity
Operating shock
Non-operating shock
Operating vibration
Drop
(out of box)
Drop
(in box)
Support
Interface
-22° to 140° F (-30° to 60° C)
40 g, six surfaces
80 g, six surfaces
All ISO 7816 smart cards
Reads from and writes to all ISO7816-1, 2, 3, 4 memory and
microprocessor smart cards (T=0, T=1)
Chipset
SCM STCIII
Standard APIs supported
PC/SC, EMV2000, CT-API
Power
USB Port
Short circuit detection (protects smart card and reader)
Power supply compliant with ISO7816 and EMV (5V, 60 mA)
Supports 3-V and 5-V cards
Power consumption
100-mA maximum draw
Communication
From card
9600 bps to 330,000 bps
From computer
12 Mbps (USB transfer speed)
Landing mechanism
Contact device
Friction contact
Card insertions rating
Up to 100,000 insertion cycles
Interface modes
CCID protocol
Reader performance interface
USB connection
Electro-magnetic standards
Europe
2004/108/EC
USA
USAFCC part 15
CE-Mark, UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC, EMV2000, USB-IF
ISO 9241-4, TUVGS
Keyboard, I/O Security and Documentation CD, warranty card
HP USB PS/2 Washable Keyboard
Physical Characteristics
Electrical
Keys
104 (US) Layout, 105 (EU) layout - depending upon country
Dimensions
(L x W x H)
17.67x 6.62 x 1.38 in (449 x 168 x 35 mm)
Weight
1.7 lb (0.77 kg) minimum
Operating voltage
+ 5VDC ±5%
Power consumption
50-mA maximum (with three LEDs ON)
System interface
ESD
EMI - RFI
Page 33
QuickSpecs
Mechanical
Environmental
Microsoft® PC 99 - 2001
Keycaps
Stepped -profile design
Switch actuation
55-g nominal peak force with tactile feedback
Switch life
20 million keystrokes
Switch type
Contamination-resistant switch membrane
Cable length
7 ft (2.2 m)
Acoustics
50° to 122° F (10° to 50° C)
4° to 149° F (-20° to 65° C)
Operating humidity
Operating shock
40 g, six surfaces
Non-operating shock
80 g, six surfaces
Operating vibration
Drop (out of box)
Drop (in box)
Operating system support
Windows® 7, Windows Vista, Windows XP Professional
Approvals
UL, cUL, FCC, CE, TUV GS, VCCI, BSMI, C-Tick, KCC, USB-IF, WHQL, EN/IEC 60601-1, IP66/NEMA4X
Ergonomic compliance
ANSI HFS 100, ISO 9241-4, and TUVGS
HP USB Mouse
Dimensions
(H x L x W)
1.5 x 4.5 x 2.5 in (3.7 x 11.5 x 6.3 cm)
Weight
0.22 lb (0.10 kg)
Cable length
70.9 in (180 cm)
System requirements
Available USB port
Dimensions
(H x L x W)
1.47 x 4.53 x 2.47 in (37.3 x 114.97 x 62.86 mm)
Weight
3.360 oz (102g)
Page 34
QuickSpecs
Cable length
70.9 in (180 cm)
System requirements
Available USB port
Environmental
32° to 104° F (0° to 40° C)
Non-operating Temperature
-4° to 140° F (-20° to 60° C)
Operating Humidity
10% to 90%
(non-condensing at ambient)
Resolution
1000dpi
Tracking Speed
45 cm/sec
Cable Length
70.9 in (180 cm)
Mechanical
HP USB PS/2 Washable Mouse
Weight
Environmental
Electrical
Mechanical
Scroll wheel
1.56 x 2.44 x 4.61 in (3.95 x 6.21 x 11.7 cm)
4.44 oz (126 g)
-32° to 104°F (0° to 40° C)
Non-operating temperature -4° to 140°F (-20° to 60° C)
Operating humidity
10% to 90% (non condensing at ambient)
10% to 90% (non condensing at ambient)
Operating shock
40 g, 6 surfaces
Non-operating shock
80 g, 6 surfaces
Operating vibration
2 g peak acceleration
4 g peak acceleration
Drop (out of box)
80 cm height onto asphalt tile over concrete or equivalent, 5-drop in 5 direction
except the cable face
Operating voltage
5 VDC ± 10%
Power consumption
100mA
System consumption
PS/2 mini-din connector
ESD
CE level 4, 15 kV air discharge
EMI-RFI
Microsoft® PC99 – 2001
Resolution
400 ± 20% DPI
Tracking speed
10 in/s (25.4 cm/s) maximum
Acceleration
100 in/s/s (2.54 m/s/s)
Switch actuation
61 g nominal peak force
Switch life
3,000,000 operations (using Hasco modified tester)
Switch type
Low force micro-switches
Tracking mechanism life
155 mi (250 km) at average speed of 10 in/s
Cable length
6 ft (1.8 m)
Microsoft PC99 – 2001
Width
8 mm
Diameter
1.01 in (25.6 mm)
Maximum rotation speed
48 rats/sec
Switch type
Light force micro-switch
Page 35
QuickSpecs
Regulatory approvals
Compatibility
Switch life
Mechanical life
Compliant
Operating system support
1 million operations
Minimum 200,000 revolutions
UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC
Windows 7, Windows Vista Business 64*, Windows Vista Business 32*, Windows
Vista Home Basic 32*, Windows 2000, Windows XP Professional or Windows XP
Home 32* (No driver is required for this device. Native support is provided by the
operating system.), xpe, ce.net, Linux, XP-64
* Certain Windows Vista product features require advanced or additional
hardware. Windows Vista Upgrade Advisor can help you determine which
features of Windows Vista will run on your computer. To download the tool, visit:
http://www.windowsvista.com/upgradeadvisor. For Windows Vista system
requirements, visit: http://www.windowsvista.com/systemrequirements.
Page 36
QuickSpecs
Options and Accessories (sold separately)
AFTER MARKET OPTIONS:
MEMORY
HP 2GB DDR3-1600 (PC3-12800) SODIMM
Part Number
B4U38AA
B4U39AA
B4U40AA
DATA STORAGE DRIVES AND ACCESSORIES
HP 1TB, 7200 rpm, SATA -6.0 Gb/s
HP 500GB, 7200 rpm, SATA -6.0 Gb/s
HP 500GB SATA , 6G (8GB cache) Solid State Hybrid Drive (SSHD)
HP 128GB SATA Solid State Drive
HP Slim SATA DVD-ROM Drive
HP Slim SATA BDXL Blu-Ray Writer Drive
HP Slim SATA SuperMulti DVD Writer Drive
HP Slim Removable SATA HDD Frame/Carrier
HP Slim Removable SATA HDD Carrier
Part Number
QK555AA
QK554AA
E1C62AA
QV063AA
VP033AA
E0X94AA
QS209AA
C1N41AA
E3F39AA
INPUT DEVICES - KEYBOARD AND MOUSE COMBO
HP USB PS/2 Washable Keyboard & Mouse
HP Wireless Keyboard & Mouse
HP USB Keyboard and Mouse + mousepad
Part Number
BU207AA
QY449AA
B1T09AA
INPUT DEVICES - KEYBOARD
HP USB Smart Card (CCID) Keyboard
HP USB Keyboard
Part Number
BV813AA
QY776AA
INPUT DEVICES - MOUSE
HP USB Mouse
Part Number
QY778AA
QY777AA
SECURITY
HP UltraSlim Cable Lock
Part Number
H4D73AA
GRAPHICS - VIDEO ADAPTERS AND CABLES
HP DisplayPort Cable Kit
HP DisplayPort To DVI-D Adapter
HP DisplayPort To HDMI Adapter
HP DisplayPort To VGA Adapter
HP DVI Cable
USB Graphics Adapter
HP Dual Output USB Graph Adapter
Part Number
VN567AA
FH973AA
BP937AA
AS615AA
DC198A
NL571AA
C5U89AA
STANDS AND MONITOR ARM
HP Single Monitor Arm
Part Number
BT861AA
Page 37
QuickSpecs
Options and Accessories (sold separately)
HP Quick Release
EM870AA
MISCELLANEOUS
Belkin 7-Outlet Surge Protector for North America 120V
Belkin USB to Serial Adapter
Belkin CAT5e Patch Cable RJ45/RJ45
HP Business Headset
Part Number
AG290AA
EM449AA
AH122AA
QK550AA
ADDITIONAL MONITORS FOR MULTI-DISPLAY CONFIGURATIONS
HP EliteDisplay E201 20-inch LED Backlit Monitor
HP EliteDisplay E221 21.5-inch LED Backlit Monitor
HP EliteDisplay E231 23-inch LED Backlit Monitor
HP LA2405x 24-inch LED Backlit Monitor
HP EliteDisplay E271i 27-inch LED Backlit Monitor
HP EliteDisplay E221c 21.5-inch WebCam LED Backlit Monitor
HP L2206tm 21.5-inch LED Backlit Touchscreen Monitor
Part Number
C9V73AA
C9V76AA
C9V75AA
D0P36AA
D7Z72AA
D9E49AA
B0L55AA
LANDESK SOFTWARE (E-DELIVERY)
Contact your HP representative for available options.
Part Number
Page 38
QuickSpecs
Changes
QuickSpecs Changes
HP ProOne 400 G1 All-in-One PC (19.5” Non-Touch)
July 17, 2014 - From Version 4 to 5
Changed
Updated to correct a version issue.
June 12, 2014 - From Version 3 to 4
Changed
Processors and Software Components were revised.
April 3, 2014 - From Version 2 to 3
Changed
Removed mentions of multistream.
March 10, 2014 - From Version 1 to 2
Changed
Security was revised.
DA-14700 5 - Version 5 - July 17, 2014
© Copyright 2014 Hewlett-Packard Development Company, L.P. All rights reserved.
The information contained herein is subject to change without notice and is provided "as is" without warranty of any kind. The warranties for
HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows
and Windows 7 are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Intel and Core are
registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries. Bluetooth is a registered trademark of Bluetooth
SIG, Inc., in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.
Page 39
QuickSpecs
HP DisplayPort Adapters
Overview - HP DisplayPort to HDMI Adapter
Models
HP DisplayPort to HDMI Adapter
HP DisplayPort to DVI-D Adapter
HP DisplayPort to VGA Adapter
HP DisplayPort to Dual Link DVI-D Adapter
BP937AA
FH973AA
AS615AA
VN567AA
NR078AA
Model
Converts the DisplayPort connector
on a HP Compaq Business Desktop
computer or HP Workstation to a
HDMI port. The adapter has a
latching DisplayPort connector on
one end and HDMI connector on the
other for connecting to a HDMI
monitor cable.
NOTE: Adapter only converts a
DisplayPort output to HDMI input; it
will not convert a HDMI output to a
DisplayPort input.
NOTE: The DisplayPort connector should be attached to the graphics card's DisplayPort
connector on the HP Compaq Business Desktop computer or HP Workstation, and the HDMI
connector should only be attached to the monitor HDMI input connector using a HDMI cable.
NOTE: Adapter only converts a DisplayPort output to HDMI input; it will not convert a HDMI
output to a DisplayPort input.
Key Benefits
Converts a graphics card's DisplayPort output to a HDMI output for use with a HDMI monitor.
Adapter length (approximate): 8 in (20 cm)
Latching DP connector for a secure connection
DA - 13111 Worldwide QuickSpecs — Version 17 — 4/2/2013
Page 1
QuickSpecs
Overview - HP DisplayPort to HDMI Adapter
Compatibility
The HP DisplayPort to HDMI Adapter supports the products listed below if they have a DisplayPort connector in the back of the
system or if they have a graphics card installed that has a DisplayPort connector. DisplayPort outputs are sometimes notated by the
DP++ icon. It supports all HP monitors that feature a HDMI interface.
HP Compaq 6000 Pro MT, HP Compaq 6000 Pro SFF, HP Compaq 4300 Pro SFF, HP Compaq 6005 Pro MT, HP Compaq 6005 Pro SFF,
HP Compaq 6005 Pro USDT, HP Compaq 6200 Pro MT, HP Compaq 6200 Pro SFF, HP Compaq 6300 Pro MT, HP Compaq 6300 Pro SFF,
HP Compaq 6300 Pro AiO, HP Compaq 8200 Elite SFF, HP Compaq 8200 Elite CMT, HP Compaq 8200 Elite MT, HP Compaq 8200 Elite
USDT, HP Compaq 8300 Elite CMT, HP Compaq 8300 Elite MT, HP Compaq 8300 Elite SFF, HP Compaq 8300 Elite USDT, HP Compaq
8300 Pro AiO, HP Compaq 6305 Pro MT, HP Compaq 6305 Pro SFF, and HP rp5800 Retail System.
HP xw4600, xw9400, Z400, Z600 and Z800 Workstations, HP TouchSmart 9100.
NOTE: Please check this product's web page on HP.com for current compatibility information.
NOTE: Not all models are available in all regions.
Spares information
617450-001
Service and Support
The DisplayPort to HDMI Adapter has either a one-year limited warranty or the remainder of the warranty of the HP product in which
it is installed. Technical support is available seven days a week, 24 hours a day, by phone, as well as online support forums. Certain
restrictions and exclusions apply.
Technical Specifications
Connectors
DisplayPort plug and HDMI receptacle
Adapter length
(approximate)
Adapter weight
8.0 in (20.0 cm)
Option kit contents
HP DisplayPort to HDMI Adapter, documentation
0.10 lbs (0.05 kg)
Page 2
QuickSpecs
Overview - DisplayPort to DVI-D Adapter
Model
single link DVI-D port. The adapter
has a latching DisplayPort connector
on one end and DVI-D connector on
the other for connecting to a DVI-D
monitor cable.
NOTE: The DisplayPort interface should be attached to the graphics card DisplayPort Adapter on
the HP Compaq Business Desktop computer or HP Workstation, and the DVI-D connection should
only be attached to the monitor DVI-D interface.
NOTE: Adapter only converts a DisplayPort output to DVI-D input; it will not convert a DVI-D
output to a DisplayPort input.
Key Benefits
Converts a graphics card's DisplayPort output to a DVI output for use with a Single Link DVI-D monitor.
Compatibility
The HP DisplayPort to DVI-D Adapter supports the products listed below if they have a DisplayPort connector in the back of the system
or if they have a graphics card installed that has a DisplayPort connector. DisplayPort outputs are sometimes notated by the DP++
icon. It supports all HP monitors that feature single link DVI interface.
HP Compaq 6000 Pro MT, HP Compaq 6000 Pro SFF, HP Compaq 4300 Pro SFF, HP Compaq 6005 Pro MT, HP Compaq 6005 Pro SFF, HP
Compaq 6005 Pro USDT, HP Compaq 6200 Pro MT, HP Compaq 6200 Pro SFF, HP Compaq 6300 Pro MT, HP Compaq 6300 Pro SFF, HP
Compaq 6300 Pro AiO, HP Compaq 8200 Elite SFF, HP Compaq 8200 Elite CMT, HP Compaq 8200 Elite MT, HP Compaq 8200 Elite USDT,
HP Compaq 8300 Elite CMT, HP Compaq 8300 Elite MT, HP Compaq 8300 Elite SFF, HP Compaq 8300 Elite USDT, HP Compaq 8300 Pro
AiO, HP Compaq 6305 Pro MT, and HP Compaq 6305 Pro SFF.
HP xw4600, xw9400, Z400, Z600 and Z800 Workstations, HP TouchSmart 9100, HP rp5800 Retail System.
Page 3
QuickSpecs
Overview - DisplayPort to DVI-D Adapter
Spares information
662727-001
Service and Support
The DisplayPort to DVI-D Adapter has either a one-year limited warranty or the remainder of the warranty of the HP product in which it
is installed. Technical support is available seven days a week, 24 hours a day, by phone, as well as online support forums. Certain
Connectors
DisplayPort and DVI-D single link connector
Adapter length
7.5 in (19.0 cm)
Adapter weight
0.10 lbs (0.05 kg)
Option kit contents
HP DisplayPort to DVI-D Adapter, documentation
Page 4
QuickSpecs
Overview - DisplayPort to VGA Adapter
Model
AS615AA
VGA port. The adapter has a
latching DisplayPort connector on
one end that connects to the
graphics source and VGA connector
on the other for connecting to a
VGA monitor cable.
NOTE: The DisplayPort interface should be attached to the graphics card DisplayPort Adapter on
the HP Compaq Business Desktop computer or HP Workstation and the VGA connection should
only be attached to the monitor VGA interface.
NOTE: Adapter only converts a DisplayPort output to VGA input; it will not convert a VGA output
to a DisplayPort input.
Key Benefits
Converts a graphics card's DisplayPort output to a VGA output for use with a VGA monitor.
Latching DisplayPort connector for a secure connection
Compatibility
The HP DisplayPort to VGA Adapter supports the products listed below if they have a DisplayPort connector in the back of the system
or if they have a graphics card installed that has a DisplayPort connector. DisplayPort outputs are sometimes notated by the DP++
icon. It supports all HP monitors that feature VGA interface.
HP Compaq 6000 Pro MT, HP Compaq 6000 Pro SFF, HP Compaq 4300 Pro SFF, HP Compaq 6005 Pro MT, HP Compaq 6005 Pro SFF,
HP Compaq 6005 Pro USDT, HP Compaq 6200 Pro MT, HP Compaq 6200 Pro SFF, HP Compaq 6300 Pro MT, HP Compaq 6300 Pro SFF,
HP Compaq 6300 Pro AiO, HP Compaq 8200 Elite SFF, HP Compaq 8200 Elite CMT, HP Compaq 8200 Elite MT, HP Compaq 8200 Elite
USDT, HP Compaq 8300 Elite CMT, HP Compaq 8300 Elite MT, HP Compaq 8300 Elite SFF, HP Compaq 8300 Elite USDT, HP Compaq
8300 Pro AiO, HP Compaq 6305 Pro MT, and HP Compaq 6305 Pro SFF.
HP xw4600, xw9400, Z400, Z600, Z800 Workstations, HP TouchSmart 9100, HP rp5800 Retail System.
NOTE: Using the HP DisplayPort to VGA Adapter may require an update to the graphics driver installed on your system. To install the
most up-to-date graphics driver go to: www.hp.com.
Spares information
663103-001
Service and Support
The HP DisplayPort to VGA Adapter has either a one-year limited warranty or the remainder of the warranty of the HP product in
which it is installed. Technical support is available seven days a week, 24 hours a day, by phone, as well as online support forums.
Certain restrictions and exclusions apply.
Page 5
QuickSpecs
Overview - DisplayPort to VGA Adapter
Connectors
DisplayPort and VGA connector
Adapter length
8 in (20 cm)
Adapter weight
0.1 lbs (0.06 kg)
Option kit contents
HP DisplayPort to VGA Adapter, documentation
Maximum vertical refresh 85 Hz
rate
Display support
162 MHz RAMDAC
Display max resolution
1600x1200
HP DisplayPort to VGA adapter display resolutions and refresh rates
NOTE: Other resolutions may be available but are not recommended as they may not have been tested and qualified by HP. Using the
HP DisplayPort to VGA Adapter may require an update to the graphics driver installed on your system. To install the most up-to-date
graphics driver go to: www.hp.com.
Resolution
Max refresh rate
640x480
85
800x600
85
1024x768
85
1280x720
85
1280x1024
85
1440x900
75
1600x1200
60
1680x1050
60
1920x1080
60-R
1920x1200
60-R
NOTE: 60-R denotes reduced blanking timings are used. Not all monitors support reduced blanking timing.
Page 6
QuickSpecs
Overview - DisplayPort Cable Kit
Model
VN567AA
Connects a DisplayPort connector
on an HP Business Desktop
computer to a DisplayPort
connector on a monitor.
HP DisplayPort Cable
Key Benefits
Connects a DisplayPort connector on an HP Business Desktop computer to a DisplayPort connector on a monitor.
6.6 ft (2.0 m) cable
Compatibility
The HP DisplayPort Cable supports the HP Compaq 6000 Pro MT, HP Compaq 6000 Pro SFF, HP Compaq 4300 Pro SFF, HP Compaq
6005 Pro MT, HP Compaq 6005 Pro SFF, HP Compaq 6005 Pro USDT, HP Compaq 6200 Pro MT, HP Compaq 6200 Pro SFF, HP Compaq
6300 Pro MT, HP Compaq 6300 Pro SFF, HP Compaq 6300 Pro AiO, HP Compaq 8200 Elite SFF, HP Compaq 8200 Elite CMT, HP
Compaq 8200 Elite MT, HP Compaq 8200 Elite USDT, HP Compaq 8300 Elite CMT, HP Compaq 8300 Elite MT, HP Compaq 8300 Elite
SFF, HP Compaq 8300 Elite USDT, HP Compaq 8300 Pro AiO, HP Compaq 6305 Pro MT, and HP Compaq 6305 Pro SFF.
HP TouchSmart 9100, HP rp5800 Retail System.
Compatible with any graphics card that has a DisplayPort output. DisplayPort outputs are sometimes notated by the DP++ icon.
Page 7
QuickSpecs
Overview - DisplayPort Cable Kit
Spares information
487562-001
Service and Support
The HP DisplayPort Cable Kit has either a one-year limited warranty or the remainder of the warranty of the HP product in which it is
installed. Technical support is available seven days a week, 24 hours a day, by phone, as well as online support forums. Certain
Connectors
HP DisplayPort Cable
Adapter length
6.6 ft (2.0 m)
Adapter weight
0.26 lbs (0.120 kg)
Option kit contents
HP DisplayPort Cable, documentation
Page 8
QuickSpecs
Overview - HP DisplayPort to Dual Link DVI-D Adapter
NR078AA
Converts the DisplayPort
connector on an HP Compaq
Business Desktop computer or HP
Workstation to a dual link DVI port.
The adapter has a latching
DisplayPort connector on one end,
and a USB connector and DVI-D
connector on the other end for
connecting to a DVI monitor cable.
NOTE: The USB cable of the DisplayPort to Dual Link DVI-D adapter is for power only and should
be connected to one of the system's rear USB ports. USB hubs may not provide sufficient power
and are not recommended for use with this adapter.
Key Benefits
Converts a graphics card's DisplayPort output to dual link DVI
Resolution up to 2560x1600
Supports all HP monitors that feature dual link DVI interface, including the HP LP3065 30-inch Widescreen LCD Monitor
Compatibility
The HP DisplayPort to Dual Link DVI-D Adapter supports the products listed below if they have a DisplayPort connector in the back of
the system or if they have a graphics card installed that has a DisplayPort connector. DisplayPort outputs are sometimes notated by
the DP++ icon. This adapter is supported on the following HP products:
HP Compaq dx2390 Microtower, HP Compaq dx2400 Microtower, HP Compaq dx2450 Microtower, HP Compaq dx7400 Microtower,
HP Compaq dx7500 Microtower, HP Compaq dx7500 Small Form Factor, HP Compaq dc5800 Microtower, HP Compaq dc5850
Microtower, HP Compaq dc7800 Convertible Minitower, HP Compaq dc7900 Small Form Factor, HP Compaq dc7900 Convertible
Minitower, HP Compaq dc7900 UltraSlim Desktop, HP Compaq 6000 Pro Microtower, HP Compaq 6000 Pro Small Form Factor, HP
Compaq 6005 Pro Microtower Business PC, HP Compaq 6005 Pro Small Form Factor, HP Compaq 6200 Pro Microtower, HP Compaq
6200 Pro Small Form Factor, HP Compaq 6300 Pro Microtower, HP Compaq 6300 Pro Small Form Factor, HP Compaq 8200 Elite Small
Form Factor, HP Compaq 8200 Elite Convertible Minitower, HP Compaq 8200 Elite Microtower, HP Compaq 8200 Elite Ultra-Slim
Desktop, HP Compaq 8300 Elite Convertible Minitower, HP Compaq 8300 Elite Microtower, HP Compaq 8300 Elite Small Form Factor,
HP Compaq 4300 Pro Small Form Factor Business Desktop PCs.
HP xw4600, xw9400, Z400, Z600 and Z800 Workstations, HP TouchSmart 9100, HP rp5800 Retail System.
Page 9
QuickSpecs
Overview - HP DisplayPort to Dual Link DVI-D Adapter
Spares information
572033-001
Service and Support
The DisplayPort to dual link DVI-D Adapter has either a one-year limited warranty or the remainder of the warranty of the HP product
in which it is installed. Technical support is available seven days a week, 24 hours a day, by phone, as well as online support forums.
Certain restrictions and exclusions apply.
Connectors
DisplayPort, USB and DVI-D dual link connectors
Adapter length
18.69 in (47.47 cm)
Adapter weight
0.375 lbs (0.17 kg)
Maximum vertical refresh 60 Hz
rate
Monitor support
Supports all HP monitors that feature dual link DVI-D interface
Display max resolution
2560x1600
Option kit contents
HP DisplayPort to Dual Link DVI-D Adapter, documentation
© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical
or editorial errors or omissions contained herein.
Microsoft and Windows are US registered trademarks of Microsoft Corporation.
Page 10
QuickSpecs
HP Height Adjustable and Reclining Stand
Overview
Stand in upright position
Stand in recline position
Models
Part Number: C1N43AA
Introduction
Designed specifically for use with the HP Compaq Pro 6300 All-in-One, HP Compaq Elite 8300 All-in-One, HP ProOne 600 G1 All-inOne, HP EliteOne 800 All-in-One Business PCs, the HP Height Adjustable and Reclining Stand gives you the freedom to create a unique
space that works for you.
Key features and benefits
Create a single or multi-user all-in-one environment that complements your desktop, kiosk or lobby in the most spaceconstrained environments
Easy-attach, industry-standard VESA mounting bracket
Wide range of high and low tilt positions that bring your display into perfect view
Vertically adjusts more than 4-inches
Tilt angle reclines up to 60 degrees
Rotates to landscape or portrait orientation
Swivels from left and right 360 degrees
Built to withstand 10,000 cycles on lift and tilt mechanisms
Page 1
QuickSpecs
Overview
Compatibility
HP ProOne 600 G1 All-in-One, HP EliteOne 800 All-in-One, HP Compaq Pro 6300 All-in-One and HP Compaq Elite 8300 All-in-One
Business PC.
Service and support
Your Option Limited Warranty is a one (1) year (HP Option Limited Warranty Period) parts replacement warranty on any HP-branded
or Compaq-branded options (HP Options). If your HP Option is installed in an HP Hardware Product, HP may provide warranty service
either for the HP Option Limited Warranty Period or the remaining Limited Warranty Period of the HP Hardware Product in which the
HP Option is being installed, whichever period is the longer but not to exceed three (3) years from the date you purchased the HP
Option. NOTE: Certain restrictions and exclusions apply. Consult the HP Customer Support Center for details.
Page 2
QuickSpecs
Stand Specifications
Dimensions
(H x W x D)
Stand weight
Unpackaged (H x W x D):
15.9 x 10.5 x 9.8 in (402.9 x 267.4 x 247.7 mm)
Packaged (H x W x D):
13.3 x 19 x 13.9 in (337 x 482 x 352 mm)
Unpackaged: 16.5 lbs (7.5 kg)
Packaged: 19 lbs (8.63 kg)
Height adjustment
Up to 110 mm vertical
Tilt angle
Operating life
Lowest position: => -5° to +60°
Highest position: => -5° to +30°
10,000 cycles on lift and tilt mechanisms
Color
Black
VESA external mounting
Supports 100x100 mm VESA standard
© 2012-2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Page 3
Solid State Hybrid Drives (SSHD) for HP Business
Desktop PCs
QuickSpecs
Overview
Models
HP 500GB SATA 6G 2.5 (8GB Cache) SSHD Drive
E1C62AA
Introduction
Get the responsiveness of solid state memory and the capacity of a hard drive in a highly affordable package with the HP SATA solid
state hybrid drive (SSHD), which delivers fast boot-up, shut down, and application loading.
Benefits
Enjoy 8 GB of solid state memory and 500 GB of hard drive capacity in a compact, hybrid drive design that delivers a faster
boot-up and enhanced application performance compared to a conventional hard disk drive.
Enjoy super-fast access to the files you use most with Adaptive Memory™ technology, which copies frequently-used data
stored on the hard drive to solid state memory for faster loading.
HP Drive Lock
Solid State Hybrid Drives (SSHD) offer enhanced security via a new Drive Lock. When enabled, this ATA security feature set prevents
software access to user data on the drive until one or two user-defined passwords are provided.
SMART IV technology
Self-Monitoring Analysis and Reporting Technology (SMART) hard drive technology is allows hard drives to monitor their own health
and to raise flags if imminent failures are predicted. If the drive determines that a failure is imminent, the SMART hard drive
technology enables the intelligent manageability or management software to generate a fault alert. While the current versions of
SMART hard drives do a good job monitoring the data on the hard drive media, the ever increasing emphasis on reliability and quality
has promoted HP to implement SMART IV technology which constantly checks that the data flow from host interface to media and
media to host interface is not compromised. This is accomplished by inserting a 2 byte parity code into every 512 byte block in the
data path of the hard drive's Cache RAM. This unique parity checking performed by HP's SMART IV technology hard drives, allows for
more complete error detection coverage encompassing the entire data path between the host and the hard drive.
Smart IV is also known as IOEDC: I/O Error Detection Code.
Native Command Queuing
NCQ or Native Command Queuing, is a SATA protocol extension that allows the hard drive to have several write or read commands
outstanding at the same time. In contrast, normal non-queued operation requires each command to be completed before the next
command is issued by the host system. Queuing allows the drive to complete the commands in the order that allows for best overall
throughput. It also involves an advanced method of transferring data to or from the host, called First Party Direct Memory Access
(FPDMA) that allows the hard drive and the host controller to manage the data transfers for multiple outstanding commands, without
involving the host processor. NCQ can contribute to better performance but the results are dependent on many factors, including the
access patterns of the various applications and operating system functions that are initiating drive accesses. Enabling NCQ features
in the hard drive requires AHCI support from the host system BIOS, controller, and driver. AHCI support is typically implemented in
RAID configurations.
NOTE: GB = 1 billion bytes. Actual available capacity is less.
Performance
HP Solid State Hybrid Drives offer high instantaneous (burst) data-transfer rates (up to 6Gb/s) on platforms with 6Gb/s capable host
chipsets.
Page 1
QuickSpecs
Desktop PCs
Overview
Compatibility
HP 500GB SATA 6G 2.5 (8GB Cache) SSHD Drive are compatible with HP ProDesk 600 G1 Tower, HP ProDesk 600 G1 SFF, HP ProOne
600 G1 AiO, HP EliteDesk 800 G1 Tower, HP EliteDesk 800 G1 SFF, HP EliteDesk 800 G1 USDT, HP EliteOne 800 G1 AiO, HP Compaq
6305 Pro MT, HP Compaq 6305 Pro SFF.
NOTE: Not all hard drive models are available in all regions.
Operating Systems supported: Windows 8 Pro, Windows 8, Windows 7 Home Basic*, Windows 7 Home Premium*, Windows 7
Professional Edition 32*, Windows 7 Professional Edition 64*, Windows 7 Ultimate Edition 32*, Windows 7 Ultimate Edition 64*,
Windows Vista Business 64†, Windows Vista Business 32†, Windows Vista Home Basic 32†, Windows 2000, Windows XP Professional
or Windows XP Home 32. No driver is required for this device. Native support is provided by the operating system.
*This system may require upgraded and/or separately purchased hardware and/or a DVD drive to install the Windows 7 software and
take full advantage of Windows 7 functionality. See http://www.microsoft.com/windows/windows-7/ for details.
† Certain Windows Vista product features require advanced or additional hardware. Windows Vista Upgrade Advisor can help you
determine which features of Windows Vista will run on your computer. To download the tool, visit:
http://www.windowsvista.com/upgradeadvisor. For Windows Vista system requirements, visit:
http://www.windowsvista.com/systemrequirements.
Service and Support
Your Option Limited Warranty is a one (1) year (HP Option Limited Warranty Period) parts replacement warranty on any HP-branded
or Compaq-branded options (HP Options). If your HP Option is installed in an HP Hardware Product, HP may provide warranty service
either for the HP Option Limited Warranty Period or the remaining Limited Warranty Period of the HP Hardware Product in which the
HP Option is being installed, whichever period is the longer but not to exceed three (3) years from the date you purchased the HP
Option.
Page 2
Desktop PCs
QuickSpecs
500 GB
(QK554AA)
Formatted Capacity
500 GB1
Height
6.8 +/- 0.2 mm (0.370 +/-.008 in)
Width
69.85 +/- 0.25 mm (2.750 +/- 0.010 in)
Length
100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)
Weight
95 g (0.209 lb)
Interface
Serial ATA
Synchronous Transfer
Rate (Maximum)
Up to 6 Gb/s
Cache Buffer
64 MB (64,768 KB)
Seek Time2
Seek measurements are
taken with nominal power
at 25°C ambient
temperature. All times are
measured using drive
diagnostics.
The specifications in the table below are defined as follows: Track-to-track
seek time is an average of all possible single-track seeks in both directions.
Average seek time is a true statistical random average of at least 5000
measurements of seeks between random tracks, less overhead.
Single Track
2 ms
Spindle Speed
5400 rpm
Sectors
976,773,168
41° to 131° F (5° to 55° C)
Option Kit Contents
HP Solid State Hybrid Drive, the appropriate cable for the drive, installation
guide
Average
12 ms
Average Latency
5.6 ms
1. GB = 1 billion bytes. Actual available capacity is less.
2. These drives are designed to consistently meet the seek times represented. Physical seeks, regardless of mode (such as track-totrack and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted,
benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.
© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical
or editorial errors or omissions contained herein. Microsoft and Windows are US registered trademarks of Microsoft Corporation.
Page 3
HP Client Automation Standard software
Data sheet
Can you meet your client
management challenges?
•Quick time to value: Leverage out-of-the-box
functionality for common use cases such as
deployment and migration, application installation,
automated patch content acquisition and distribution,
and self-service management
Managing client devices effectively and efficiently
is a mission-critical function for today’s businesses.
However, that challenge is growing in complexity with •Ease of administration: A single, integrated
Web-based console for centralized management of
increasingly frequent and varied security threats, more
your client environment from a single set of screens
stringent availability and compliance requirements,
with a common look and feel
and a growing mobile and remote workforce. This
volume of change, combined with what are often
manual processes, can stretch already-thin IT resources Unique features for HP client devices
While HPCA Standard Edition has many capabilities
to the breaking point.
for both HP and non-HP client devices, customers
who manage HP desktops and notebooks can take
advantage of the following unique capabilities:
HP Client Automation
Standard Edition highlights
and features
HP Client Automation (HPCA) Standard Edition
software is designed to provide an affordable,
easy-to-use, and quick-to-deploy offering that can
solve your pain points
•Ease of deployment: Install and configure in
30 minutes with an integrated infrastructure
designed for self-deployment
Integrated alert monitoring
•Automatically flags disruptive occurrences for
administrative action
•Includes reports to help pinpoint particular issues such
as chassis intrusion or hardware component failures
Automated driver and BIOS updates
•Compares to the latest updates available from HP
on an ongoing basis to determine whether BIOS or
driver updates are necessary
•Automatically acquires and updates relevant
Softpaqs for BIOS, device drivers, and applications
HP Client Automation software helps IT
organizations significantly reduce operational
costs and improve quality of service by
automating many routine tasks in managing the
client environment such as patching, application
deployment, and OS provisioning—including
notebook PCs and thin clients.
Integration with HP ProtectTools
•Provides remote initialization of embedded
TPM chips in HP hardware
•Integrates with HP ProtectTools software for
security management
Integration with HP Software Out-of-Band
Management Console
•Supports for managing PCs and
notebooks equipped with Intel vPro
and AMD DASH technologies
•Enables remote management of PCs and
notebooks irrespective of the OS or the
power state of the machine
Features for all client devices
HPCA Standard Edition provides a full suite of
management capabilities for both HP and
non-HP client devices, including:
Quick and easy installation and integration
•A simple installation process with components
pre-configured for increased out-of-the-box
capabilities
•Automatically discovers networked client devices
through both network scanning and importing from
LDAP-compliant directory services or flat files
•Utilizes management agents pre-installed on certain
HP hardware
•Enables remote deployment of management agents
to end-user devices
2
Simplified task management
•Integrated, Web-based management console to
perform common configuration and management
tasks, including managing client hardware, software,
and remote operations
•Wizard-driven, step-by-step processes for deploying
operating systems, patches, software, and operating
systems as well as other operations
•An easy-to-use interface for creating reports,
defining dynamic, inventory-based device groups,
and configuring the management infrastructure
Fully automated operating system deployment
and migration
•Systems can be fully deployed from “bare metal”
or migrated to a new operating system without ever
needing a desk-side visit
•Retains and migrates individual user settings and
data so that the user’s new system looks and works
just like the previous system
•Automatically preserves display settings, files, and
preferences of all kinds, even across version upgrades
Automated, continuous patch management
•Seamless acquisition and publication of Microsoft ®
Windows patches
•Dynamic reporting, showing which machines are
non-compliant and at greatest risk
•Verifies compliance to assigned patch levels,
reducing the risk of accidental removal, deletion, or
corruption of patches
Automated, flexible software distribution
•Enables group-driven distribution of applications,
content, and updates
•Provides both “push” and “pull” deployment options,
enabling administrators to automatically deploy
required software while offering end users the flexibility
to install authorized software on their own schedules
•Automatically completes jobs assigned to offline
machines when network access is detected
•Supports deployment of MSI applications, HP
Softpaqs, self-executing installation programs, and
delivery of multiple files and folders
Thin-client management
HPCA Standard Edition also includes full management
capabilities for the HP thin clients, including:
•Discovery and inventory
•Remotely install software and softpaq updates
•Power management
•Capture and deploy images
These capabilities are available on all HP thin clients
with the following operating systems:
•Windows CE 5.0 and 6.0
•Windows® XP Embedded
•HP ThinConnect
•Debian Linux
•eLinux
Deploy a solution that
can grow with your
changing needs
HP Client Automation Standard Edition provides a
migration path to HP Client Automation Enterprise
Edition and to the broader, advanced, and automated
HP Business Service Automation solution for managing
enterprise computing devices and applications—such
as PCs, servers, workstations, storage, and network
devices—on any platform across very large, complex,
heterogeneous, and continuously changing IT
environments. In addition, your license investment
in HP Client Automation is fully protected. When
migrating from HP Client Automation Standard
Edition to Enterprise Edition, you only need to pay the
difference in licensing costs.
For enterprises deploying HP Business Service
Automation solutions, HP can help enhance your
infrastructure through integrations with HP IT Service
Management (ITSM) software solutions to run a
service-centric IT environment closely aligned with
business requirements. No matter what the size of
your organization, HP provides a complete hardware
and software solution to meet your needs. With
HP, you can implement an integrated PC hardware
and manageability solution to reduce the costs of
managing PCs in your environment immediately, and
then grow it over time to fit with your changing needs.
3
A complete solution
Comprehensive training
HP provides a comprehensive curriculum of
HP Software and IT Service Management courses.
These offerings provide the training you need to
realize the full potential of your HP solutions, increase
your network optimization and responsiveness, and
achieve better return on your IT investments.
With more than 30 years experience meeting complex
education challenges worldwide, HP knows how to
train. This experience, coupled with unique insights
into HP software, positions HP to deliver a better
training experience. For more information about these
educational courses, visit www.hp.com/learn
The smartest way to invest in IT
HP Financial Services provides innovative financing
and financial asset management programs to help
you cost-effectively acquire, manage, and ultimately
retire your HP solutions. For more information on these
services, contact your HP sales representative or visit
www.hp.com/go/hpfinancialservices
Contact information
To find an HP Software sales office or reseller near
you, visit www.managementsoftware.hp.com/buy
For more information about HP Client Automation,
contact your HP representative or visit
www.hp.com/go/client
Technology for better business outcomes
To learn more, visit www.hp.com/go/bsa
© Copyright 2008–2009 Hewlett-Packard Development Company, L.P. The information contained herein
is subject to change without notice. The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services. Nothing herein should be construed
as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
4AA2-0088ENW Rev. 1, May 2009
HP Services
Get the most from your software investment
HP provides high-quality software services that
address all aspects of your software application
lifecycle needs. With HP, you have access
to standards-based, modular, multi-platform
software coupled with global services and support.
The wide range of HP service offerings—from
online self-solve support to proactive mission-critical
services—enables you to choose the services that
best match your business needs.
For an overview of HP software services, visit
www.managementsoftware.hp.com/service
To access technical interactive support,
visit Software Support Online at
www.hp.com/managementsoftware/services
To learn more about HP Software Customer
Connection, a one-stop information and learning
portal for software products and services, visit
www.hp.com/go/swcustomerconnection
HP’s Compliance with the Restriction of Hazardous
Substances (RoHS) Directives
HP is committed to compliance with all applicable laws and regulations,
including the upcoming material restrictions requirements of China’s Management
Methods for Controlling Pollution by Electronic Information Products, otherwise
known as China RoHS Phase II and the EU RoHS revision, otherwise know as
RoHS 2010.
HP has met the requirements of the several RoHS legislations currently in effect.
We have also met our internal goal of eliminating or reducing RoHS substances
to the EU specified levels for virtually all HP brand electronic products worldwide,
except where it is widely recognized that there is no technically feasible
alternative (as indicated by an exemption under the EU RoHS Directive).
As of July 1, 2006:
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, CA 94304
www.hp.com
•
All HP products put on the market into the EU and EFTA Member States
are in compliance with the EU RoHS requirements.
•
HP has also met the requirements of similar Japanese labeling legislation
that applies to many Hewlett-Packard personal computing products. You
can find HP’s J-MOSS declarations at - www.hp.com/go/jisc0950.
As of January 1, 2007:
• HP met California’s Electronic Waste Recycling Act of 2003 (Senate Bill
20) substance restrictions, otherwise known as California RoHS, by the
effective date.
•
HP met its internal voluntary goal to meet the EU requirements on a
worldwide basis for virtually all HP branded products, except where it is
widely recognized that there is no technically feasible alternative (as
indicated by an exemption under the EU RoHS Directive.
As of March 1, 2007:
•
HP met the Phase I labeling requirements of China’s Management
Methods for Controlling Pollution by Electronic Information Products,
otherwise known as China RoHS.
As of January 1, 2008:
•
HP met the Korean legislation “The Act for Resource Recycling of
Electrical/Electronic Products and Automobiles”, otherwise known as
Korean RoHS. You can find HP’s Korean RoHS declarations at www.hp.com/go/korearohs.
HP continues to plan for further RoHS “like” legislation in other jurisdictions and
will meet any additional requirements that arise.
For more than 10 years, HP has actively investigated alternatives to the use of
lead in its electrical and electronic products while ensuring that product quality is
not compromised. In 1998, HP introduced its General Specification for the
Environment (GSE), which restricted suppliers’ use of a number of substances in
HP products, including some of the substances restricted by the EU RoHS
Directive.
In 2001, HP’s central engineering group and enterprise computing business
established a team to begin the formal process of addressing RoHS, including
building and testing lead-free product prototypes. In early 2003, this team was
incorporated into a company-wide RoHS team that is now managing all aspects
of HP’s global response to the EU’s RoHS Directive, as well as other similar
legislation emerging around the world.
In addition to the company’s commitment to adherence with RoHS legislation, HP
is participating in the development of global standards for the restriction of
specific potentially hazardous substances. As regulations similar to the EU’s
RoHS Directive are proposed in other countries, HP is working along with others
in our industry to promote the harmonized global standards we believe will
accelerate the industry transition to EU RoHS compliance on a worldwide basis.
HP’s initiative to address the RoHS Directive is part of the company’s Design for
Environment program, which includes using materials more efficiently, finding
alternatives for designated materials, designing for energy efficiency, and
designing products that can be easily recycled.
More detailed information can be found at www.hp.com/environment:
2006 Global Citizenship Report
Product Environmental Impacts
Design for the Environment
Materials Innovation/Eliminating Materials of Concern/RoHS
General Specifications for the Environment
J-MOSS/JIS-C-0950 Material Declarations
China RoHS – English version
China RoHS – Chinese version
Korean RoHS Declarations
© Copyright Hewlett-Packard Company 2006 All Rights Reserved. Reproduction, adaptation, or translation without prior
written permission is prohibited except as allowed under copyright laws.
ARK | Intel® Pentium® Processor G3220T (3M Cache, 2.60 GHz)
Página 1 de 3
Intel® Pentium® Processor G3220T
(3M Cache, 2.60 GHz)
Specifications
- Essentials
Status
Launched
Launch Date
Q3'13
Processor Number
G3220T
# of Cores
2
# of Threads
2
Clock Speed
2.6 GHz
Intel® Smart Cache
3 MB
DMI2
5 GT/s
# of QPI Links
0
Instruction Set
64-bit
Instruction Set Extensions
SSE4.1/4.2
Embedded Options Available
No
Lithography
22 nm
Max TDP
35 W
Thermal Solution Specification
PCG 2013A
Recommended Customer Price
TRAY: $64.00
Datasheet
Link
- Memory Specifications
Max Memory Size (dependent on memory type)
32 GB
Memory Types
DDR3-1333
# of Memory Channels
2
Max Memory Bandwidth
21.3 GB/s
ECC Memory Supported ‡
Yes
- Graphics Specifications
Processor Graphics ‡
Intel® HD Graphics
Graphics Base Frequency
200 MHz
Graphics Max Dynamic Frequency
1.1 GHz
Graphics Video Max Memory
1.7 GB
Intel® Quick Sync Video
Yes
Intel® Clear Video HD Technology
No
# of Displays Supported
3
‡
- Expansion Options
PCI Express Revision
PCI Express Configurations
3.0
‡
Max # of PCI Express Lanes
Up to 1x16, 2x8, 1x8/2x4
16
- Package Specifications
Max CPU Configuration
1
TCASE
66.4 C
Package Size
37.5mm x 37.5mm
Graphics and IMC Lithography
22nm
Sockets Supported
FCLGA1150
Low Halogen Options Available
See MDDS
http://ark.intel.com/products/77774/Intel-Pentium-Processor-G3220T-3M-Cache-2_6...
08/08/2014
Página 2 de 3
- Advanced Technologies
Intel® Turbo Boost Technology ‡
Intel® vPro Technology
No
‡
No
Intel® Hyper-Threading Technology
‡
Intel® Virtualization Technology (VT-x)
No
‡
Yes
Intel® Virtualization Technology for Directed I/O (VT-d) ‡
No
Intel® VT-x with Extended Page Tables (EPT) ‡
Yes
Intel® TSX-NI
Intel® 64
No
‡
Yes
Idle States
Yes
Enhanced Intel SpeedStep® Technology
Yes
Thermal Monitoring Technologies
Yes
No
- Intel® Data Protection Technology
AES New Instructions
No
Secure Key
Yes
- Intel® Platform Protection Technology
Trusted Execution Technology ‡
Execute Disable Bit
No
Yes
‡
Compatible Products
- Server/Workstation Board
Compare
Product Name
Status
Select All
Board
Form
Factor
Chassis
Form
Factor
Socket
Intel® Server Board S1200V3RPL
Launched uATX
4U Rack
or
Pedestal
LGA1150
Intel® Server Board S1200V3RPS
Launched uATX
Rack or
Pedestal
Intel® Server Board S1200V3RPO
Launched uATX
Intel® Server Board S1200V3RPM
Launched uATX
Embedded
Options
Available
Max
TDP
Recommended
Customer Price
95
W
N/A
LGA1150 No
95
W
N/A
1U Rack
LGA1150 No
95
W
N/A
1U Rack
LGA1150
95
W
N/A
Yes
Yes
- System
Compare
Product Name
Intel® Server System P4308RPLSHDR
Status
Launched
Chassis Form Factor
Board Form Factor
4U Pedestal
uATX
Socket
LGA1150
Ordering and Spec Information
Trade Compliance Information
ECCN
5A992A
CCATS
NA
US HTS
8542310000-HYBRD
Ordering and Spec Information
Spec Code
Ordering Code
Step
RCP
Intel® Pentium® Processor G3220T (3M Cache, 2.60 GHz) FC-LGA12C, Tray
SR1CL
CM8064601483713
C0
$64.00
All information provided is subject to change at any time, without notice. Intel may make changes to manufacturing life cycle, specifications, and product descriptions at any time, without notice. The
information herein is provided "as-is" and Intel does not make any representations or warranties whatsoever regarding accuracy of the information, nor on the product features, availability,
functionality, or compatibility of the products listed. Please contact system vendor for more information on specific products or systems.
"Intel classifications" consist of Export Control Classification Numbers (ECCN) and Harmonized Tariff Schedule (HTS) numbers. Any use made of Intel classifications are without recourse to Intel and
shall not be construed as a representation or warranty regarding the proper ECCN or HTS. Your company may be the exporter of record, and as such, your company is responsible for determining the
correct classification of any item at the time of export.
08/08/2014
Página 3 de 3
“Announced” SKUs are not yet available. Please refer to the Launch Date for market availability.
Some products can support AES New Instructions with a Processor Configuration update, in particular, i7-2630QM/i7-2635QM, i7-2670QM/i7-2675QM, i5-2430M/i5-2435M, i5-2410M/i5-2415M.
Please contact OEM for the BIOS that includes the latest Processor configuration update.
‡ This feature may not be available on all computing systems. Please check with the system vendor to determine if your system delivers this feature, or reference the system specifications
(motherboard, processor, chipset, power supply, HDD, graphics controller, memory, BIOS, drivers, virtual machine monitor-VMM, platform software, and/or operating system) for feature compatibility.
Functionality, performance, and other benefits of this feature may vary depending on system configuration.
See http://www.intel.com/content/www/us/en/architecture-and-technology/hyper-threading/hyper-threading-technology.html?wapkw=hyper+threading for more information including details on
which processors support Intel® HT Technology.
Max Turbo Frequency refers to the maximum single-core processor frequency that can be achieved with Intel® Turbo Boost Technology. See www.intel.com/technology/turboboost/ for more
information.
The Recommended Customer Price (“RCP”) is pricing guidance for Intel products. Prices are for direct Intel customers and are subject to change without notice. Taxes and shipping, etc. not included.
Prices may vary for other package types and shipment quantities, and special promotional arrangements may apply. Listing of these RCP does not constitute a formal pricing offer from Intel. Please
work with your appropriate Intel representative to obtain a formal price quotation.
System and Maximum TDP is based on worst case scenarios. Actual TDP may be lower if not all I/Os for chipsets are used.
Low Halogen: Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly
meet JS-709 requirements, and the PCB / substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment.
For benchmarking data see http://www.intel.com/performance.
Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different processor families. See
http://www.intel.com/content/www/us/en/processors/processor-numbers.html for details.
Processors that support 64-bit computing on Intel® architecture require an Intel 64 architecture-enabled BIOS.
Send us your feedback!
08/08/2014
Page 1 of 2
SYSmark® 2007 Preview 1.06.1109
Test Summary
Project Name
No. of Iterations
System Conditioning
2014-07-30 06.18 - 7
3
false
Scores
E-Learning
VideoCreation
Productivity
3D
Official Rating
209
250
201
218
Iteration 1
211
249
202
218
SYSmark® 2007 Preview Rating
Iteration 2
209
248
199
218
Iteration 3
209
253
200
218
219
Operating System Summary
Operating System:
Language:
File System:
DirectX:
Microsoft .NET Framework:
Keyboard Language:
Microsoft Windows 7 Professional
English (United States)
NTFS
DirectX 9.0c
Version: v1.1
en-us;@%SystemRoot%\system32\mlang.dll,-4386
Hardware Summary
CPU
Vendor:
CPU Name:
Code Name:
CPU Model Number:
Family Stepping:
Core Frequency:
Bus Frequency:
L1 Cache:
L2 Cache:
L3 Cache:
CPUID Flagset:
Physical Core:
GenuineIntel
Intel
Intel(R) Pentium(R) CPU G3220T @ 2.60GHz
family: 6; model: C; stepping: 3
2594
UnknownMHz
L1 T-Cache -1KuOps; L1 Data Cache -1KB
-1KB
-1
MMX SSE SSE2 SSE3 IA32E NX
8
Platform
Vendor:
BIOS Mode:
BIOS Release Date:
Board Vendor:
Board Model:
Board Version:
Hewlett-Packard
Default System BIOS
20140423000000.000000+000
Hewlett-Packard
18EA
Unknown
Memory
Memory Channel:
Memory Capacity:
Memory Speed:
BANK 0
2047 MB
1600 MHz
Storage
Hard Drive Model:
Hard Drive Buffer:
Hard Drive Size:
Hard Drive Type:
Hard Drive Speed:
about:blank
ST500LM0 00-1EJ162-SSHD SCSI Disk Device
476937 MB
7/30/2014
Page 2 of 2
Video
Vendor:
Chipset:
Driver:
MemorySize:
Resolution:
Type:
Intel Corporation
Intel(R) HD Graphics
igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
10.18.10.3383
1785 MB
1600 x 900 x 4294967296 colors
PCI
Audio
Vendor:
Type:
Driver:
Realtek High Definition Audio
Integrated
RTKVHD64.sys Version:6.0.1.7161
Vendor:
Type:
Driver:
Bluetooth Hands-free Audio
Vendor:
Type:
Driver:
Intel(R) Display Audio
Integrated
IntcDAud.sys Version:6.16.0.3131
btwaudio.sys Version:6.5.1.2900
Network
Driver:
MediaType:
Connected:
Type:
Bluetooth Device (Personal Area Network) 6.1.7600.16385
Ethernet 802.3
FALSE
Integrated
Driver:
MediaType:
Connected:
Type:
Broadcom BCM943228HMB 802.11abgn 2x2 Wi-Fi Adapter 6.30.223.201
Ethernet 802.3
FALSE
PCI
Driver:
MediaType:
Connected:
Type:
Realtek PCIe GBE Family Controller 7.85.423.2014
Ethernet 802.3
FALSE
PCI
Display Devices
Vendor:
Brightness:
Resolution:
RefreshRate:
Size:
about:blank
Unknown
100
1600 X 900
60 Hz
Unknown
7/30/2014
Graphics Drivers — Supported graphics APIs and features
Página 1 de 2
Select a Different Product
Guide Me
Identify Your Product
Search for Drivers
Search for Documents
Search for Specifications
Contact Support
Did you find this information
to be helpful?
Yes
Graphics Drivers
Supported graphics APIs and features
No
If you have additional
feedback, please let us
know.


Remaining Characters: 300
For the best compatibility with application and games, use the Intel® Driver Update Utility, or
go to Download Center for the latest graphics drivers.
Click (+) or the section descriptions to expand the content:
Submit
4th Generation Intel® Core™ Processors
We appreciate all feedback,
but cannot reply or give
product support. Please do not
enter contact information. If
you require a response,
3rd Generation Intel® Core™ Processors
contact us.
2nd Generation Intel® Core™ Processors
Intel® Core™ Processors
Intel® Pentium® Processors with Intel® HD Graphics
The products below do not support the following features: Intel® Insider™ technology,
Intel® InTru™ 3D Technology, and Intel® Clear Video HD Technology.
Intel® Graphics
Chipsets
Intel®
Intel®
Shader
Quick
Wireless
DirectX* OpenGL* OpenCL* model
Sync
Display
support
Video
Intel® Pentium®
Processors
3000/G3000 Series
with Intel® HD
Graphics
11.1
4
No
5
No
No
Intel® Pentium®
Processors
2000/G2000
Series with Intel®
HD Graphics
11.0
4
No
5
No
No
Intel® Pentium®
Processors J2850
with Intel® HD
Graphics
11
4
1.2
5
Yes
No
Intel® Pentium®
Processors
900/B900/
G600/G800
Series with Intel®
HD Graphics
10.1
3.1
No
4.1
No
No
Intel® Pentium®
Processors
G6000/P6000/U5000 10.1
Series with Intel®
HD Graphics
2.1
No
4
No
No
Intel® Celeron® Processors with Intel® HD Graphics
Older Graphics Products
Graphics API Information
Determining Graphics API Information
This applies to:
2nd Generation Intel® Core™ Processors with Intel® HD
Graphics 3000/2000
3rd Generation Intel® Core™ Processors with Intel® HD
Graphics 2500
3rd Generation Intel® Core™ Processors with Intel® HD
Graphics 4000
4th Generation Intel® Core™ Processors with Intel® HD
Graphics 4200
Graphics 4400
Graphics 4600
Graphics 5000
Intel® 82Q965 Graphics and Memory
Controller Hub (GMCH)
Intel® B43 Express Chipset
Intel® Celeron® Processors with Intel® HD
Graphics
Intel® Core™ Processors with Intel® HD
Graphics
Intel® G31 Express Chipset
Intel® Pentium® Processors with Intel® HD
http://www.intel.com/support/graphics/sb/CS-033757.htm
08/08/2014
Graphics Drivers — Supported graphics APIs and features
4th Generation Intel® Core™ Processors with Intel®
Iris™ Graphics 5100
4th Generation Intel® Core™ Processors with Intel®
Iris™ Pro Graphics 5200
Intel® 82810 Graphics and Memory Controller Hub
(GMCH)
Intel® 82815 Graphics Controller
Intel® 82830M Graphics and Memory Controller Hub
(GMCH)
Intel® 82845G Graphics Controller
Intel® 82852/82855 Graphics Controller Family
Intel® 82865G Graphics and Memory Controller Hub
(GMCH)
Intel® 82915G/82910GL Express Chipset Family
Intel® 82945G Express Chipset
Intel® 82946GZ Graphics Controller
Intel® 82G965 Graphics and Memory Controller Hub
(GMCH)
Intel® 82Q963 Graphics and Memory Controller Hub
(GMCH)
Página 2 de 2
Graphics
Intel® Q33 Express Chipset
Mobile Intel® 4 Series Express Chipset
Family
Mobile Intel® 915GM/GMS, 910GML Express
Chipset Family
Mobile Intel® 945GM Express Chipset Family
Mobile Intel® 965 Express Chipset Family
Solution ID: CS-033757
Last Modified: 06-Aug-2014
Date Created: 20-Aug-2012
http://www.intel.com/support/graphics/sb/CS-033757.htm
08/08/2014
Instituto Nacional de Metrologia,
Normalização e Qualidade Industrial
INFORMAÇÕES SOBRE OS ACORDOS DE
RECONHECIMENTO MÚTUO NO CAMPO DA
ACREDITAÇÃO DE LABORATÓRIOS
Documento de caráter orientativo
DOQ-CGCRE-007
Revisão 01 – JANEIRO/2008
MOD-SEGEQ-002 – Rev. 00 – Apr. JUL/06 – Pag. 0/02
DOQ-CGCRE-007 – Revisão 01 – JANEIRO/2008
Página 01/05
INFORMAÇÕES SOBRE OS ACORDOS DE RECONHECIMENTO MÚTUO NO CAMPO DA
ACREDITAÇÃO DE LABORATÓRIOS
SUMÁRIO
1 Objetivo
2 Campo de Aplicação
3 Responsabilidade
4 Siglas
5 Introdução
6 Acordos de Reconhecimento Mútuo no Campo da Acreditação de Laboratórios
7 Registro de Alterações Neste Documento
Anexo – Relação dos Organismos de Acreditação Signatários de Acordos Internacionais de Acordos
de Reconhecimento Mútuo no Campo da Acreditação de Laboratórios
1 OBJETIVO
Este documento fornece orientações sobre os acordos de reconhecimento mútuo, regionais e
internacionais, assinados pela Cgcre/Inmetro no campo da acreditação de laboratórios de ensaio e
calibração.
2 CAMPO DE APLICAÇÃO
Este documento se aplica à Dicla, particularmente aos laboratórios acreditados e postulantes à acreditação
e aos avaliadores e especialistas que atuam nos processos de acreditação de laboratórios.
3 RESPONSABILIDADE
A responsabilidade pela revisão deste documento é da Dicla.
4 SIGLAS
APLAC
Dicla
Cgcre
EA
ILAC
IAAC
Inmetro
Asia-Pacific Laboratory Accreditation Cooperation
Divisão de Credenciamento de Laboratórios
Coordenação Geral de Acreditação
European co-operation for Accreditation
International Laboratory Accreditation Cooperation
Interamerican Accreditation Cooperation
Instituto Nacional de Metrologia, Normalização e Qualidade Industrial
MOD-SEGEQ-002 – Rev. 00 – Apr. JUL/06 – Pg. 02/02
Página 02/05
5 INTRODUÇÃO
Os acordos de reconhecimento mútuo entre organismos de acreditação de laboratórios são uma das
formas mais efetivas de facilitar a eliminação da necessidade de re-ensaio de materiais e produtos nos
países importadores, problema identificado pela Organização Mundial do Comércio (OMC) como umas
das maiores barreiras técnicas ao comércio. A Cgcre/Inmetro, juntamente com organismos de acreditação
congêneres de outros países, vem buscando estabelecer, por meio de cooperações regionais e
internacionais de organismos de acreditação, acordos que possam promover a confiança daqueles que se
utilizam dos resultados de ensaios e calibrações. Atualmente a Cgcre/Inmetro mantém acordos de
reconhecimento mútuo com 58 organismos de acreditação de 46 economias. Com estes acordos os
resultados dos ensaios e calibrações realizados pelos laboratórios acreditados pela Cgcre/Inmetro passam
a ser aceitos pelos demais organismos de acreditação signatários, que, tal como a própria Cgcre/Inmetro,
devem ainda promover o acordo em seus próprios países, divulgando-o às autoridades reguladoras, à
indústria e a todos os envolvidos com o comércio exterior. Os acordos de reconhecimento mútuo entre
organismos de acreditação, serão, cada vez mais, ferramentas facilitadoras do comércio e uma base
técnica para os acordos de comércio exterior entre governos.
6 ACORDOS DE RECONHECIMENTO MÚTUO NO CAMPO DA ACREDITAÇÃO DE
LABORATÓRIOS
6.1 International Laboratory Accreditation Cooperation – ILAC (http://www.ilac.org)
A ILAC é a cooperação internacional que reúne organismos de acreditação de laboratórios de todo o
mundo. A Cgcre/Inmetro é membro da ILAC desde a sua criação. Desde 1996, a ILAC tem desenvolvido
mecanismos para implementação de seu acordo internacional no campo da acreditação de laboratórios,
cuja documentação base foi definida durante sua Assembléia Geral, organizada pelo Inmetro, no Rio de
Janeiro, em outubro de 1999.
Em 2 de novembro de 2000, em Washington DC, durante a Conferência ILAC 2000, o acordo da ILAC
(ILAC Arrangement) foi assinado por 34 organismos de acreditação de laboratórios de 26 economias dos
5 continentes, incluindo a Cgcre/Inmetro, único representante da América Latina. O acordo entrou em
vigor a partir de 31 de janeiro de 2001, passando seus signatários a reconhecer a equivalência dos seus
sistemas de acreditação de laboratórios e se comprometendo a promover o acordo e a aceitação dos
certificados de calibração e relatórios de ensaio emitidos pelos laboratórios acreditação por seus parceiros
internacionais.
6.2 European co-operation for Accreditation – EA (www.european–accreditation.org)
A EA é a cooperação para acreditação de laboratórios e organismos de certificação e inspeção que
envolve os países membros da Comunidade Européia. A Cgcre/Inmetro mantém um contrato de
cooperação com a EA desde 1998.
Participam do acordo multilateral da EA apenas organismos de acreditação oriundos dos países membros
da Comunidade Européia.
A EA também mantém acordos bilaterais com organismos de acreditação de países não pertencentes a
Comunidade Européia, tais como o A2LA (Estados Unidos), o NATA (Austrália) e o SANAS (África do
Sul).
Página 03/05
Em 1998 a Cgcre/Inmetro apresentou requerimento para assinar um acordo bilateral com a EA e, em 30
de janeiro de 2001, após a realização de avaliação de pares, foi assinado o acordo bilateral de
reconhecimento mútuo.
Embora um organismo de acreditação que tenha acordo bilateral com a EA não tenha obrigação de
reconhecer outros organismos que também tenham acordo bilateral com a EA, atualmente, todos os
organismos que tem acordo bilateral com a EA são também signatários do acordo da ILAC e,
consequentemente, aceitam os certificados emitidos pelos laboratórios acreditados pela Cgcre/Inmetro.
6.3 Interamerican Accreditation Cooperation – IAAC (http://www.iaac.org)
A IAAC é a cooperação que reúne os organismos de acreditação de laboratórios e de organismos de
certificação e inspeção de países das Américas. Participam da cooperação 19 membros plenos e 10
membros associados de 20 países, reunindo as principais economias da América do Norte, América
Central, Caribe e América do Sul.
Em outubro de 2002 foi assinado seu primeiro Acordo Multilateral de Reconhecimento Mútuo na
atividade de acreditação de laboratórios. Todos os signatários do acordo da IAAC são também signatários
do acordo da ILAC.
6.4 Asian-Pacific Laboratory Accreditation Cooperation – APLAC
( http://www.aplac.org/members/members_mra.htm)
A APLAC é a cooperação que reúne os organismos de acreditação de laboratórios da Comunidade
Econômica da Ásia-Pacífico (APEC).
Embora a Cgcre/Inmetro não mantenha acordo bilateral com a APLAC, os certificados e relatórios
emitidos pelos laboratórios acreditados pela Cgcre/Inmetro são aceitos pelos organismos de acreditação
daquela cooperação, á que todos os seus membros são signatários do acordo da ILAC.
7 Registro de Alterações Neste Documento
Foram feitas as seguintes alterações:
1) Substituição do termo “credenciamento” por “acreditação”.
2) Atualização da relação de signatários dos acordos de reconhecimento mútuo e eliminação de dados de
localização e símbolo de acreditação desses signatários devido à impossibilidade de manter esses
dados atualizados.
______________________
/ANEXO
Página 04/05
ANEXO
Relação dos Organismos de Acreditação Signatários de Acordos Internacionais de
Acordos de Reconhecimento Mútuo no Campo da Acreditação de Laboratórios
Abaixo incluímos a relação de organismos de acreditação signatários de acordos internacionais de
reconhecimento mútuo no campo de acreditação de laboratórios, válida em 09/10/2007. Tendo em vista
que o processo de reconhecimento mútuo é dinâmico e são incluídos novos signatários com freqüência,
recomenda-se que os interessados busquem informações atualizadas sobre novos signatários dos acordos
nos sites da ILAC (http://www.ilac.org), EA (www.european–accreditation.org) e IAAC
(http://www.iaac.org).
1.
País / Economia
África do Sul
2.
Alemanha
3.
4.
5.
6.
7.
Argentina
Austrália
Áustria
Bélgica
Brasil
8.
Canada
9.
10.
11.
12.
13.
14.
15.
Costa Rica
Cuba
Dinamarca
Egito
Eslovaquia
Eslovênia
Espanha
16. EUA
17.
18.
19.
20.
21.
22.
Filipinas
Finlândia
França
Grécia
Holanda
Hong Kong,
China
23. Índia
24.
25.
26.
27.
Indonésia
Irlanda
Israel
Itália
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Organismo de Acreditação
South African National Accreditation System (SANAS)
DATech Deutsche Akkreditierungsstelle Technik GmbH
Deutsche Akkreditierungsstelle (DACH)
Deutscher Kalibrierdienst (DKD)
Deutsches Akkreditierungssytem Prufwesen (DAP)
Organismo Argentino de Acreditacion (OAA)
National Association of Testingg Authorities (NATA)
Bundesministerium fur Wirtschaft und Arbeit (BMWA)
Belgian Accreditation Structure (BELAC)
Coordenação Geral de Acreditação (CGCRE/INMETRO)
Escopo do Acordo
Ensaio e Calibração
Ensaio
Ensaio
Calibração
Ensaio
11. Canadian Association for Environmental Analytical Laboratories (CAEAL)
Ensaio
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Ensaio
23.
24.
25.
26.
27.
28.
Standards Council of Canada (SCC)
Ente Costarricense de Acreditación (ECA)
National Accreditation Body of Republica de Cuba (ONARC)
Danish Accreditation (DANAK)
National Laboratories Accreditation Bureau (NLAB)
Slovak National Accreditation Service (SNAS)
Slovenian Accreditation (SA)
Entidad Nacional de Acreditacion (ENAC)
International Accreditation Service, Inc. (IAS)
American Association for Laboratory Accreditation (A2LA)
Assured e Calibração and Laboratory Accreditation Select Services
(ACLASS)
National Voluntary Laboratory Accreditation Program (NVLAP)
Philippine Accreditation Office (PAO)
Finnish Accreditation Service (FINAS)
Comite Francais d’Accreditation (COFRAC)
Hellenic Accreditation System S.A. (ESYD)
Dutch Accreditation Council (RvA)
29. Hong Kong Accreditation Service (HKAS)
30. National Accreditation Board for – testing and Calibration Laboratories
(NABL)
31. National Accreditation Body of Indonesia (KAN)
32. Irish National Accreditation Board (INAB)
33. Israel Laboratory Accreditation Authority (ISRAC)
34. Servizio di Taratura in Italia (SIT)
35. Sistema Nazionale per l’Accreditamneto di Laboratori (SINAL)
Calibração
Ensaio
País / Economia
36.
37.
38.
Malásia
39.
México
40.
Noruega
41.
Nova Zelândia 42.
Polônia
43.
Portugal
44.
Reino Unido
45.
República Checa 46.
República da
47.
Coréia
República
Popular da
48.
China
Romênia
49.
Singapura
50.
28. Japão
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
Página 05/05
Organismo de Acreditação
International Accreditation Japan (IAJapan)
Japan Accreditation Board for Conformity Assessment (JAB)
Voluntary EMC Laboratory Accreditation Center INC (VLAC)
Department of Standards Malaysia (DSM)
entidad mexicana de acreditación a.c. (ema)
Norsk Akkreditering (NA)
International Accreditation New Zealand (IANZ)
Polish Centre for Accreditation (PCA)
Instituto Portugues de Acreditacao (IPAC)
United Kingdom Accreditation Service (UKAS)
Czech Accreditation Institute (CAI)
Escopo do Acordo
Ensaioe Calibração
Ensaio
Korea Laboratory Accreditation Scheme (KOLAS)
China National Accreditation Service for Conformity Assessment (CNAS)
Romanian Accreditation Association (RENAR)
Singapore Accreditation Council (SAC)
Ensaio
41. Suécia
51. Swedish Board for Accreditation and Conformity Assessment (SWEDAC)
42. Suíça
52. Swiss Accreditation Services (SAS)
53. Bureau of Laboratory Accreditation, Department of Science Service, Ministry
of Science and Technology (BLA-DSS)
54. Thai Industrial Standards Institute (TISI)
55. The Bureau of Laboratory QualityStandards, Department of Medical
Sciences, Ministry of Public Health, Thailand (BLQSDMSc)
56. Taiwan Accreditation Foundation (TAF)
57. Turkish Accreditation Agency (TURKAK)
58. Bureau of Accreditation (BoA)
43. Tailândia
44. Taipei
45. Turquia
46. Vietnã
_______________________
Ensaio
Ensaio
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier's Name:
Supplier's Address:
DoC #: TPC-P033-R2
11445 Compaq Center Drive West, Houston, TX 77070, USA
declares, that the product
Product Name and Model:
Desktop PC; HP ProOne 400 G1 AiO Business PC (19.5” NT)
Regulatory Model Number: 1) TPC-P033
Product Options:
All
conforms to the following Product Specifications and Regulations:
EMC:
EN 55022: 2010 +AC:2011 Class B
EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008
EN 55024: 2010
FCC CFR 47 Part 15
ICES-003:2012
Safety:
IEC 60950-1:2005+A1:2009
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011
EN 62479:2010
Telecom:
EN
EN
EN
EN
EN
300 328 V1.8.1
301 893 V1.7.1
301 489-17 V2.1.1
301 489-1 V1.9.2
62311:2008
Energy Use:
Regulation (EC) No. 617/2013
EN50564:2011
Version 5.2 ENERGY STAR Product Specification for Computers (automatic power management)
RoHS:
EN 50581:2012
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC, the R&TTE Directive 1999/5/EC, the Ecodesign Directive 2009/125/EC, the
RoHS Directive 2011/65/EU and carries the
marking accordingly.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation and
test reports, this number should not be confused with the marketing name or the product numbers.
Houston, Nov. 14,
2013
Joe Sharkey, Manager
Houston Product Compliance Center
Local contact for regulatory topics only:
EMEA:
U.S.:
Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
www.hp.com/go/certificates
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
TPC-P033
OPTIONS
CATEGORY & DESCRIPTION
REGULATORY MODEL NUMBER
Wilkins Peak 7260HMW NB 802.11a/b/g/n
7260HMW NB
Bumblebee BCM943228HMB WLAN 802.11
a/b/g/n + BT combo
BCM943228HMB
AC adapter
HSTNN-XA25
Product environmental attributes – THE ECO DECLARATION
The declaration may be published only when all rows and/or fields marked with an * are filled-in (n.a. for not applicable).
Additional information regarding each item may be found under P14.
Brand *
Hewlett-Packard
Company name *
Contact information *
Hans Wendschlag
http://www.hp.com/hpinfo/globalcitizenship/environment/contactem
ail.html
http://www.hp.com/hpinfo/globalcitizenship/environment/
Internet site *
Logo
Additional information
The company declares (based on product specification or test results based obtained from sample testing), that the product
conforms to the statements given in this declaration.
Type of product *
Integrated PC
Commercial name *
HP ProOne 400 G1 AIO Business PC (19.5” Non-Touch)
Model number *
400 G1
Issue date *
1/7/2014
Intended market *
Global
Europe
Asia, Pacific & Japan
Americas
Other
Additional information
This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.
Quality Control
Item
QC1 *
QC2 *
Requirement met
Yes
The company enforces an internal quality control scheme to ensure the correctness of this eco declaration
The company is a member of an eco declaration system that enforces regular independent quality control
such as organized by IT-Företagen (see www.itecodeclaration.org).
Annex B of ECMA-370 4th e d i t i o n A m e n d e d , F e b r u a r y 2 0 1 0
Page 1 (6)
No
Model number *
400 G1
Issue date *
1/7/2014
Logo
Product environmental attributes - Legal requirements
Item
P1
P1.1*
P1.2*
P1.3*
P1.4*
P1.5*
P1.6*
P1.7*
P1.8*
P1.9*
P1.10*
P2
P2.1*
Requirement met
Yes
P3
P3.1*
Batteries
If the product contains a battery or an accumulator, it is labeled with the disposal symbol and if it contains
more than 0.0005% of mercury (for button cells only) by weight, or more than 0.004% of lead, it shall be
marked with the chemical symbol for the metal concerned, Hg or Pb. Information on proper disposal is
provided in user manual. (See legal reference)
Button cells used in the product do not contain more than 2% by weight of mercury. Other batteries or
accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. (See legal reference)
Batteries and accumulators are easily removable by either users or service providers (as dependent on the
design of the product). Exception: Batteries that are permanently installed for safety, performance, medical
or data integrity reasons do not have to be “easily removable”. (See legal reference)
Safety, EMC connection to the telephone network and labeling
The product complies with legally required safety standards as specified (see legal reference).
P3.2*
The product complies with legally required standards for electromagnetic compatibility (see legal reference).
P3.3*
If product is intended for connection to a public telecom network or contains a radio transmitter, it complies
with legally required standards for radio and telecommunication devices (see legal reference).
The product is labeled to show conformance with applicable legal requirements (see legal reference).
P2.2*
P2.3*
P3.4*
P4
P4.1*
P4.2*
P4.3*
P5
P5.1*
P5.2*
P5.3*
No
n.a.
Hazardous substances and preparations
Products do not contain more than; 0.1% lead, 0.01% cadmium, 0.1% mercury, 0.1% hexavalent chromium,
0.1% polybrominated biphenyls (PBB) or 0.1% polybrominated diphenyl ethers (PBDE). (See legal
reference and Note B1)
Products do not contain Asbestos (see legal reference).
Comment: Legal reference has no maximum concentration value.
Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC),
hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum
concentration values.
Products do not contain more than; 0.005% polychlorinated biphenyl (PCB), 0.005% polychlorinated
terphenyl (PCT) in preparations (see legal reference).
Products do not contain more than 0.1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the
chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS),
Tris-(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (see legal reference).
Comment: Legal reference has no maximum concentration values.
Textile and leather parts with direct skin contact do not contain more than 0.003% Azo colorants that split
aromatic amines. (See legal reference and Note B1)
Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as
pentachlorophenol and derivatives (see legal reference).
Parts with direct and prolonged skin contact do not release nickel in concentrations above 0.5
2
microgram/cm /week (see legal reference).
Comment: Max limit in legal reference when tested according to EN1811:1998.
REACH Article 33 information about substances in articles is available at (add URL or mail contact):
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/reachdesktop-pcs.html
Consumable materials
If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium max 0.01% (see
legal reference and Note B1).
If ink/toner is used in the product, it does not contain cadmium max 0.1% by weight (see legal reference).
If the ink/toner formulation/preparation is classified as hazardous according to applicable regulations, the
product/packaging is adequately labeled and a Safety Data Sheet (SDS) in accordance with these
requirements is available (see legal reference).
Product packaging
Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and
hexavalent chromium by weight of these together.
Plastic packaging material is marked according to ISO 11469 referring ISO 1043 (see legal reference).
The product packaging material is free from ozone depleting substances as specified in the Montreal
Protocol (see legal reference).
Note B1: Restriction applies to the homogeneous material, unless other specified and expressed in weight %.
Annex B of ECMA-370 4th edition Amended, February 2010
Page 2 (6)
Model number *
400 G1
Issue date *
1/7/2014
Logo
Product environmental attributes - Market requirements - Environmental conscious design
Requirement met
Item
P6
P6.1*
*=mandatory to fill in. Additional information regarding each item may be found under P14.
Treatment information
Information for recyclers/treatment facilities is available (see legal reference).
P7
P7.1*
Design
Disassembly, recycling
Parts that have to be treated separately are easily separable
P7.2*
Plastic materials in covers/housing have no surface coating.
P7.3*
Plastic parts >100g consist of one material or of easily separable materials.
P7.4*
Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043.
P7.5
Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6*
Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
P7.7*
Product lifetime
Upgrading can be done e.g. with processor, memory, cards or drives
P7.8*
Upgrading can be done using commonly available tools
P7.9.
Spare parts are available after end of production for: 5 years
P7.10
P7.12
Service is available after end of production for:
years
Material and substance requirements
Product cover/housing material type:
Material type: ABS 94HB
Material type:
Electrical cable insulation materials of power cables are PVC free.
P7.13
Electrical cable insulation materials of signal cables are PVC free
P7.14
All cover/housing plastic parts >25g are free from chlorine and bromine.
P7.15
All printed circuit boards (without components) >25g are halogen free. as defined in IEC61249-2-21.
(See Note B2)
Flame retarded plastic parts >25g in covers / housings are marked according ISO 1043-4:
Marking: PBT-GF30 FR(40)
Alt. 1
Chemical specifications of flame retardants in printed circuit boards >25g (without components):
TBBPA (additive)
, TBBPA (reactive)
, Other; chemical name:
, CAS #:
P7.11*
P7.16
P7.17
Yes
No
n.a.
Material type:
Alt. 2
Chemical specifications of flame retardants in printed circuit boards (without components) >25g according
ISO 1043-4: FR(40)
P7.18
Alt. 1
Flame retarded plastic parts >25g contain the following flame retardant substances/preparations in
concentrations above 0.1%:
Comment: No legal limits exist, this is a market requirement.
1. Chemical name:
, CAS #:
2. Chemical name:
, CAS #:
3. Chemical name:
, CAS #:
Alt. 2
Chemical specifications of flame retardants in plastic parts >25g according ISO 1043-4:
PBT-GF30 FR (40)
P7.19
Plastic parts >25g are free from flame retardant substances/ preparations above 0.1% classified as R45,
R40, R46, R48, R50, R51, R53, R60, R61 and any combination of these (See Note B3)
P7.20
P7.21
P7.22
P8
P8.1*
Of total plastic parts’ weight >25g, recycled material content is 0 %.
Of total plastic parts’ weight >25g, biobased material content is 0%.
Light sources are free from mercury
If mercury is used specify: Number of lamps:
and max. mercury content per lamp:
Batteries
Battery chemical composition: lithium/manganese dioxide
P8.2
Batteries meet the requirements of the following voluntary program/s:
mg
Note B2: IEC61249-2--21 has maximum limits for chlorine and bromine but does not address fluorine, iodine and astatine
which are included in the group of halogens.
Note B3: 'Starting from January 2009, Risk phrases can be replaced by Hazard phrases according to the Globally
Harmonized System (GHS), mandatory by December 2010.
Page 3 (6)
Model number *
400 G1
Issue date *
1/7/2014
Logo
Product environmental attributes - Market requirements (continued)
Item
P9
9.1
Requirement met
Yes
No
Energy mode *
Power
level
100 V AC
ENERGY STAR® On Mode *
(System Idle)
ENERGY STAR® Low Power
Sleep Mode* (S3 - Windows
“Standby”) With Wake On LAN
(WOL) Enabled
at Power level
115 V AC
at Power level
230 V AC
26.56 W
26.98 W
27.36 W
1.17 W
1.17 W
1.20 W
0.86 W
0.86 W
ENERGY STAR Program
Requirements for Computers: Ver. 6.0
52.5 kWh/year
52.9 kWh/year
ENERGY STAR Program
System Off/Apparent Off Mode 0.85 W
(ACPI S5) With Wake On
LAN(WOL) Enabled* (Test
Unit connected to AC Mains,
AC adapter connected to AllIn-One PC, if applicable)
51.6 kWh/year
ETEC *
at Reference / Standard
modes and test method *
Annual Energy Consumption
(calculated value) for each
input voltage
Display resolution*: 1600 x 900 Megapixels (Applies only to Integrated PCs (All-In-One PC)
Print Speed *
:
for
energy
®
ENERGY STAR Program
®
ENERGY STAR Program
®
®
®
ENERGY STAR Program
Requirements for Displays (Ver. 6.0)
Images per minute
Default time to enter energy save mode:
®
ENERGY STAR Program
minutes
P9.2*
Information about the energy save function is provided with the product.
P9.3*
The product meets the energy requirements of the following voluntary program/s:
ENERGY STAR version: 6.0 Tier:
Product category: Desktop PC
Others specify:
Emissions
Noise emission – Declared according to ISO 9296
Mode
Mode description
Declared
Declared A-weighted
A-weighted
sound pressure level L pAm (dB)
sound power
Bystander positions
level LWAd (B) Operator position
Desktop
(only if product is not
or Desk side
operator attended)
Idle
* Fans on, HDD spinning (if applicable)
* 3.6
25
P10
P10.1
n.a.
Energy consumption
For the product the following power levels or energy consumptions are reported:
Operation
* Fans on, HDD spinning
* 3.6
25
Other mode
Measured according to:
P10.2
ISO7779
Other
ECMA-74
(only if not covered by ECMA-74 with LpAm measurement distance
m)
The product meets the acoustic noise requirements of the following voluntary program/s:
Page 4 (6)
Model number *
400 G1
Issue date *
1/7/2014
Logo
Product environmental attributes - Market requirements (continued)
Requirement met
Item
P10.3*
P10.4
P10.5
P10.6
P11
P11.1*
P11.2*
Yes
P11.3*
Paper containing post-consumer recycled fibers can be used, provided that it meets the requirements of
EN12281.
2-sided (duplex) printing/copying is an integrated product function.
P12
P12.1*
Ergonomics for computing products
The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
P12.2*
The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
P13
P13.1*
Packaging and documentation
Product packaging material type(s): PAPER/Corrugated & PLASTIC/Plast. Other
Product packaging material type(s): PLASTIC/Polyethylene low density
Product packaging material type(s): PLASTIC/EPE-Expanded Polyethylene
Product packaging material type(s): PAPER/Cardboard & misc
Product plastic packaging is free from PVC.
P13.2*
P13.3*
P13.4*
Rev.
P13.5
P14
All
sections
P9
No
n.a.
Chemical emissions from printing products
Test performed according to ECMA-328 (ISO/IEC 28360) standard
, other specify:
Typical emission rate (print phase) is (mg/h):
Dust
Ozone
Styrene
Benzene
TVOC
Chemical emission requirements of the following voluntary program/s
are met for :
Dust
Ozone
Styrene
Benzene
TVOC
Electromagnetic emissions
Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary
program/s:
Consumable materials for printing products
A Safety Data Sheet (SDS) is available for the ink/toner preparation, even if not legally required (see P4.3).
weight (kg): 2.827
weight (kg): 0.432
weight (kg): 0.166
weight (kg): 0.95
Specify media for user and product documentation (tick box):
Electronic
, Paper
, Other
For paper user and product documentation, please specify contained percentage of post-consumer recycled
fiber: 0 %
User and product documentation do not contain chlorine bleached paper
Additional information (See Note B4)
1. Product environmental information contained in this declaration is valid as of the date the declaration is published. Changes to
external standards referenced in the IT Eco-Declaration may invalidate some information contained in this declaration over time.
1. The energy measurements presented in this declaration are for a typically configured PC featuring a hard disk drive, a high
efficiency power supply, and a Microsoft Windows® operating system.
2. HP Personal Computers are offered in multiple configurations. The system power consumption measurements may change as
the configuration changes (i.e. as hard disk drives, memory, graphics cards, and other components are changed or added).
P10
3. HP computers marked with the ENERGY STAR® Logo are qualified with the applicable U.S. Environmental Protection Agency
(EPA) ENERGY STAR specifications for computers. For more information about HP’s ENERGY STAR qualified products, visit
www.hp.com/go/energystar and select the applicable product category to find PC models that meet the ENERGY STAR
specifications.
1. Acoustic noise information published on the ECMA 370 The Eco Declaration represents a typically configured product base
model only. If optional items with moving parts are added, like extra hard disks or graphic cards with fans etc, these can change
acoustic noise values for which HP can take no responsibility.
Note B4: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and
hitting the <Enter> key.
Page 5 (6)
Legal references Europe Annex B
Re fer en ce
De c la rat ion ite m
2002/95/EC (ROHS Directive)
P1.1, P4.1
REACH, Annex XVII
P1.6, P1.8, P4.2
REACH, Annex XVII
P1.4
REACH, Annex XVII
P1.2
REACH, Annex XVII
P1.7
REACH, Annex XVII
P1.9
Regulation (EC) No. 2037/2000, 2038/2000, 2039/2000
P1.3
N o r we g i a n r e g u l a t i o n r e l a t i n g t o r e s t r i c t i o n s o n t h e u s e
of certain dangerous chemicals 20.12.2002
P1.5
2006/66/EC (Battery and accumulators Directive)
P2.1, P2.2, P2,3, P3.4, P8.1
2006/95/EC (Low Voltage Directive)
P3.1, 3.4
2004/108/EEC (New EMC Directive)
P3.2, 3.4
1999/5/EC (R&TTE Directive)
P3.3, 3.4
“REACH" Regulation (1907/2006), annex VII
P1.10
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP)
P4.3
REACH article 31, annex II
P4.3
2004/12/EC (Directive on packaging and packaging
wa s t e )
P5.1
(97/129/EC) (Commission Decision on Identification
System for Packaging Materials
P5.2
2037/2000/EC Regulation on Substances that Deplete
the Ozone Layer
P5.3
2002/96/EC (WEEE directive)
P3.4, P6.1
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP)
P7.19
Page 6 (6)
Windows Certified Products List
Página 1 de 2
Sign in
Search Dev Center with Bing
Dev Center - Hardware
DASHBOARD
GET STARTED
DESIGN
DEVELOP
DEPLOY
SUPPORT
Dev Center - Hardware > Windows Certified Products List
By Hewlett-Packard Company
Certification details
Verification report:
1629313 - Certification Report - 12/23/2013
Certification status:
Windows 7
Windows 7 x64
Certified for Microsoft Windows 8.1 Client family, x64
Product types:
Feature and AQ's:
X86
X64
8.1 X64
-
All-In-One
Windows 7 Client

System.Client.Aero
System.Client.BluetoothController.Base
System.Client.BluetoothController.USB
System.Client.BrightnessControls
System.Client.Buttons
System.Client.CPU
System.Client.Digitizer.Base
System.Client.Digitizer.Touch
System.Client.Firewall
System.Client.Firmware.UEFI.GOP
System.Client.Graphics
System.Client.MediaTranscode
System.Client.PCContainer
System.Client.SystemConfiguration
System.Client.SystemImage
System.Client.SystemPartition
System.Client.VideoEncode
System.Client.VideoPlayback
System.Client.Webcam
System.Client.Webcam.Specification
System.Fundamentals.DebugPort
System.Fundamentals.DebugPort.USB
System.Fundamentals.Firmware
System.Fundamentals.Firmware.Boot
System.Fundamentals.Graphics
System.Fundamentals.Graphics.Display
System.Fundamentals.Graphics.Display.Firmware.VBE
System.Fundamentals.Graphics.DisplayRender
System.Fundamentals.Graphics.InternalDisplay
System.Fundamentals.HAL
System.Fundamentals.Input
System.Fundamentals.MarkerFile
System.Fundamentals.Network
System.Fundamentals.NX
System.Fundamentals.PowerManagement
System.Fundamentals.PXE
System.Fundamentals.Reliability
System.Fundamentals.Security
System.Fundamentals.SignedDrivers
System.Fundamentals.SMBIOS
https://sysdev.microsoft.com/en-US/Hardware/LPL/ProductDetails.aspx?ProductID=...
08/08/2014
Página 2 de 2
System.Fundamentals.SystemAudio
System.Fundamentals.SystemAudio.3rdPartyDriver
System.Fundamentals.SystemPCIController
System.Fundamentals.SystemUSB
System.Fundamentals.USBBoot
System.Fundamentals.USBDevice
System.Fundamentals.WatchDogTimer
System.Server.Base
System.Server.Graphics
System.Server.SMBIOS
System.Server.SVVP
System.Server.SystemStress
System.Server.Virtualization
System.Server.WHEA
Network sites
Windows Dev Center
Other links
Windows Dev Center home
SUPPORT
Windows Store apps
Microsoft Connect
Internet Explorer
Desktop
Hardware
© 2014 Microsoft. All rights reserved.
Terms of use
| Trademarks
| Privacy & Cookies
| Site feedback
https://sysdev.microsoft.com/en-US/Hardware/LPL/ProductDetails.aspx?ProductID=...
| United States (English)
08/08/2014
Windows hardware certification report: Approved
Submission ID:
Submission date:
Hardware certification
completion date:
Company:
1629313
12/23/2013
12/23/2013
Product name:
Category:
Product type:
Qualification level:
HP ProOne 400 G1 AiO Business PC
Systems
All In One
Logo - System - Windows 7 x64
Logo - System - Windows 7
Marketing names:
Additional information:
CPU model:
INTEL_CORE_I3_PROCESSOR
CPU speed:
3000_MHZ
Firmware interface:
UEFI
BIOS manufacturer:
Hewlett-Packard
BIOS version:
L03 v02.02
BIOS date:
12/13/2013
BIOS URL:
http://www.hp.com
Windows hardware certification report: Approved
Submission ID:
Submission date:
Hardware certification
completion date:
Company:
1629903
1/1/2014
1/2/2014
Product name:
HP ProOne 400 G1 AiO Business PC
Systems
All In One
Certified for Microsoft Windows 8.1 Client family, x64
Category:
Product type:
Qualification level:
Marketing names:
Additional information:
CPU model:
INTEL_CORE_I3_PROCESSOR
CPU speed:
3000_MHZ
Firmware interface:
UEFI
BIOS manufacturer:
Hewlett-Packard
BIOS version:
L03 v02.02
BIOS date:
12/13/2013
BIOS URL:
http://www.hp.com
Página 1 de 3
EPEAT Registry
•
•
•
•
Quick Search
Search by Manufacturer
Full Search
Company List
← Back
Product:
PRE:
Country:
Product Type:
Manufacturer:
URL:
HP ProOne 400 G1 AIO Business PC (19.5” NT)
EPEAT, Inc.
Brazil
Integrated Desktop Computers
Hewlett-Packard
http://www.hp.com
Rating:
Registration Date:
1/7/2014
Monitor Type:
Flat Panel
Monitor Size:
19.5 in
Product Status:
Active
Exceptions:
Except FreeDOS and Linux configurations
Manufacturer Part #:
UPC:
EAN:
Consumer or Institutional: Consumer
EPEAT Criteria Detail
Yes R 4.1.1.1 Compliance with provisions of European RoHS Directive upon its effective date
Yes O 4.1.2.1 Elimination of intentionally added cadmium
Yes R 4.1.3.1 Reporting on amount of mercury used in light sources (mg) 1,0,
Yes O 4.1.3.2 Low threshold for amount of mercury used in light sources
Yes O 4.1.3.3 Elimination of intentionally added mercury used in light sources
Yes O 4.1.4.1 Elimination of intentionally added lead in certain applications
Yes O 4.1.5.1 Elimination of intentionally added hexavalent chromium
Yes R 4.1.6.1 Elimination of intentionally added SCCP flame retardants and plasticizers in certain
applications
Yes O 4.1.6.2 Large plastic parts free of certain flame retardants classified under European
Council Directive 67/548/EEC
Yes O 4.1.7.1 Batteries free of lead, cadmium and mercury
Yes O 4.1.8.1 Large plastic parts free of PVC
Yes R 4.2.1.1 Declaration of postconsumer recycled plastic content (%): 0
No O 4.2.1.2 Minimum content of postconsumer recycled plastic
No O 4.2.1.3 Higher content of postconsumer recycled plastic
http://ww2.epeat.net/ProductDisplay.aspx?action=print&type=detail&productid=1167... 08/08/2014
Página 2 de 3
Yes R 4.2.2.1 Declaration of renewable/bio-based plastic materials content (%): 0
No O 4.2.2.2 Minimum content of renewable/bio-based plastic material
Yes R 4.2.3.1 Declaration of product weight (lbs): 15.56 Pounds
Yes R 4.3.1.1 Identification of materials with special handling needs
Yes R 4.3.1.2 Elimination of paints or coatings that are not compatible with recycling or reuse
Yes R 4.3.1.3 Easy disassembly of external enclosure
Yes R 4.3.1.4 Marking of plastic components
Yes R 4.3.1.5 Identification and removal of components containing hazardous materials
Yes O 4.3.1.6 Reduced number of plastic material types
Yes O 4.3.1.7 Molded/glued in metal eliminated or removable
Yes R 4.3.1.8 Minimum 65 percent reusable/recyclable
Yes O 4.3.1.9 Minimum 90 percent reusable/recyclable
Yes O 4.3.2.1 Manual separation of plastics
Yes O 4.3.2.2 Marking of plastics
Yes R 4.4.1.1 Availability of additional three year warranty or service agreement
Yes R 4.4.2.1 Upgradeable with common tools
Yes O 4.4.2.2 Modular design
Yes O 4.4.3.1 Availability of replacement parts
Yes R 4.5.1.1 ENERGY STAR®: 6.0-Computers
Yes O 4.5.1.2 Early adoption of new ENERGY STAR® specification: 6.0-Computers
Yes O 4.5.2.1 Renewable energy accessory available
No O 4.5.2.2 Renewable energy accessory standard
Yes R 4.8.1.1 Reduction/elimination of intentionally added toxics in packaging
Yes R 4.8.2.1 Separable packing materials
Yes O 4.8.2.2 Packaging 90% recyclable and plastics labeled
Yes R 4.8.3.1 Declaration of recycled content in packaging
12,0,0;1,50,50;5,50,50;9,50,50;11,0,0;3,50,50;13,0,0;
Yes O 4.8.3.2 Minimum postconsumer content guidelines
No O 4.8.4.1 Provision of take-back program for packaging
No O 4.8.5.1 Documentation of reusable packaging
Yes R 4.6.1.1 Provision of product take-back service
Yes O 4.6.1.2 Auditing of recycling vendors
Yes R 4.6.2.1 Provision of rechargeable battery take-back service: HP Rechargeable Battery
Takeback Program
Yes R 4.7.1.1 Demonstration of corporate environmental policy consistent with ISO 14001
Yes R 4.7.2.1 Self-certified environmental management system for design and manufacturing
organizations
Yes O 4.7.2.2 Third-party certified environmental management system for design and
manufacturing organizations
Yes R 4.7.3.1 Corporate report consistent with Performance Track or GRI
Yes O 4.7.3.2 Corporate report based on GRI
EPEAT Criteria Summary
Criteria Category Summary
4.1 Reduction/elimination of environmentally sensitive
materials
4.2 Materials selection
4.3 Design for end of life
4.4 Product longevity/life cycle extension
Optional
Points
8/8
0/3
5/5
2/2
Página 3 de 3
4.5 Energy conservation
4.6 End of life management
4.7 Corporate performance
4.8 Packaging
2/2
1/1
2/2
2/4
Total Optional Points: 22/27
This Product is also registered in:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Australia
Austria
Belgium
Bulgaria
Canada
China
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
India
Ireland
Italy
Japan
Latvia
Lithuania
Luxembourg
Malta
Netherlands
New Zealand
Norway
Poland
Portugal
Romania
Singapore
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
United Kingdom
United States

QuickSpecs

Transcription

Similar documents

CF-SX4 Fact Sheet

See more

Taming Your Indicator Consumption Pipeline

Compaq Presario Data Sheet

Media Engine - WDL Systems

Compaq Presario Data Sheet

ELE22MIC - Microprocessors.

PRODUCT BRIEF D54250WYK - Intel® Technology Provider

HP Pavilion Data Sheet

Presentation