Sno Pusher Literature

Comments

Transcription

Sno Pusher Literature
888-PUSH-SNO
P R O D U C T
B R O C H U R E
www.snopusher.com
Quality.
Value.
Unbeatable.
Unmatched.
Snow & Ice Removal
Professionals
Whether you are a part-time or full time snow
removal business, Pro-Tech Sno Pushers are
a vital tool to have for your operations. As
the first manufacturer to produce and sell the
containment plow more than 15 years ago,
we have seen first hand how our Sno Pusher
can increase the productivity and profitability
of a company. Because the Sno Pusher is a
containment plow that captures snow and
moves it forward, instead of off to the side,
our plows are up to 500% more efficient than
a standard truck plow. We make models to
fit all sizes of loaders, backhoes, skidsteers,
tractors and forklifts. Pro-Tech understands
that your snow removal business is only part
of or a growing piece of your operations. As
a result, our Sno Pushers are created to be a
low risk, high reward purchase. That means
they are extremely affordable and usually pay
for themselves within the first year. Whether
you are servicing parking lots, ramps,
industrial sites or any other non-roadway
space, the Sno Pusher will provide you low
hassle and huge efficiencies.
Professionals
Choose
www.snopusher.com
Benefits of Using a Sno Pusher
Increased Productivity
You can get the job done faster. A Sno Pusher can expand snow removal volume by as much as 500% over conventional
blades or buckets. This is accomplished by taking several yards of snow that are contained in front of the Sno Pusher and
moving it off the property. Conventional snow plowing either moves the snow to the left or the right (still on the property).
When using just a bucket, the capacity of the bucket becomes the limiting factor. Bucket capacities range in general from 1yd.
to 4yd. Sno Pushers push 5yds to 38yds of snow (depending on equipment horsepower and weight) in one push.
Enhanced Profitability
One Pro-Tech Sno Pusher will do the work of 3 to 4 trucks, loaders or backhoes and your snow removal business will
become a greater profit center.
1. Fewer operators required
2. Fewer equipment hours required
3. Fewer machines to maintain and set up prior to season
4. The ability to do more jobs in less time (greater revenue).
5. Lower capital costs.
6. Per Pusher Profit is increased.
Greater Durability
Your Sno Pusher will be a productive tool for years to come.
1. High-quality construction and superior design translates into longer life and more reliable performance.
2. Unique structural design offers superior strength, yet is lighter than typical plowing attachments. Loaders, backhoes
and skid steers can easily handle the weight of a Sno Pusher without loss of power or productivity.
3. Few moving parts means less possibility of damage or replacement.
4. It’s easy to use - minimal operator training is required. Attach and go within 5 minutes.
5. Interchangeable between machines - an alternate machine can use the same Sno Pusher.
Cost Advantage
1. The Sno Pusher is priced well below traditional plows and snow attachments.
2. Proven to pay for itself quickly.
3. Fewer replacement parts result in lower maintenance costs.
3-Point Safety System
Protects your equipment investment, your operators and your exposure to property damage and liability.
1. Rubber cutting edge with trip action is designed to match contour of surface being plowed. The blade will run right
over any obstacles.
2. Wear shoes are raised at a 45 degree angle in the front and the rear with a 6”w height to ride over obstuctions and up
curbs. Reduces impact and damage to contract sites.
3. Quick Change Attachment System - an engineered breakout force in the chain clevis allows the unit to break free from
the machine’s bucket when accidental impact with immobile objects occurs. This results in greatly reduced damage to
equipment and contract site, and injury to operator.
888-PUSH-SNO
www.snopusher.com
Let Pro-Tech help you gain even greater efficiencies in
your snow removal business.
Pro-Tech’s wide range of product models and sizes gives snow professionals the opportunity to maximize
efficiencies. We want to provide professionals not only the best Pro-Tech product for their specific machine,
but the best Pro-Tech product for their specific application. Below are important variables to take into account
when choosing the right Pro-Tech for your needs.
LOT SIZE
The size and model of your machine will have a large impact on what type of Sno Pusher you purchase.
Pro-Tech makes Sno Pushers to fit on Loaders, Backhoes, Skid Steers, Compact Tractors, Heavy Duty Loaders, Tele-handlers, and Forklifts. However, your lot size must also be factored in as well. You need to take into
account the room you will have to maneuver inside of the lot and the obstacles that stand in your way.
SNOW TYPE
Pro-Tech is able to offer our customers a solution for any type of snow or ice they encounter. We offer our
standard rubber edge pusher, which is ideal for wet and slushy snow. We offer our IST pusher, which is perfect
for removing ice or hard pack that is present on ground surfaces. We also offer our Switchblade model which
has both rubber and steel options in one unit, giving the user the ultimate versatility in changing conditions.
OPERATOR EXPERIENCE/ USAGE
In any snow removal operation, operators of equipment are going to vary in how they utilize that equipment.
At Pro-Tech, we have tools and parts to make every operator run our equipment as level and safe as possible.
We offer higher density shoes that last longer than our standard shoes. We have options to insure the Sno
Pusher stays level during operation. The self leveling gauge is a tool that connects to the side of the unit and
lets the operator know when the Sno Pusher is level and when it is not. We also offer a self leveling shoe that
extends off the back of the Sno Pusher, eliminating operator tendency to put extra down pressure on the back
of the shoe.
888-PUSH-SNO
www.snopusher.com
SITE APPLICATION
Pro-Tech has snow removal solutions for just about any commercial job. We developed certain models of Sno
Pushers as a direct result from customer recommendations on how to make their snow removal operations
more efficient. Here is a brief description of each of our product categories.
• Standard Rubber Edge Pusher. Models to fit loaders, backhoes and skidsteers. Easy to use, the
standard rubber edged pusher is versatile on any site. The rubber edge is perfect for wet, heavy
snow conditions.
•C
ompact Sno Pusher. Made to fit on compact tractors. This is a smaller profile pusher that is very
efficient on small sites and hard to reach areas.
• Fold Out Sno Pushers. Pro-Tech offers a solution for the contractor that is transporting their Sno
Pusher from site to site. The Fold Out Sno Pushers give the contractor the ability to move from
different sites with their equipment without obstructing other lanes of traffic. Both sides fold in to
decrease the Sno Pusher width down to 8’6”, or the width of one lane of traffic.
• P ull Back Sno Pusher. Our Pull Back model is a perfect tool for loading docks or condo sites
because it lets you get up close to garages or doors and pull snow away.
• A ngle Sno Pusher. The Angle Sno Pusher fits on backhoe and loader models. This pusher works
very efficiently in clearing roadways inside of a lot, as well as more specific applications like Culde-Sacs.
• IST Sno Pusher. These models fit on loaders, backhoes and skidsteers. They have a steel trip edge
cutting system, perfect for clearing ice and hard pack.
• S witchblade Sno Pusher. These models fit on loaders, backhoes and skidsteers. They are a two
sided pusher with one side equipped with a rubber edge and the other side equipped with a steel
edge. Versatile for any site application.
• S uper Duty. This is the largest and heaviest model of Sno Pusher. Intended for large excavating
loaders, this product is ideal for very big, wide open spaces.
• Fork Tube Sno Pusher. This model attaches to any sized fork lift. It’s ideal for industrial sites or any
facility that already has a forklift and is removing snow themselves.
• S idewalk V Plow. This heavy duty V Plow attaches to skidsteers and tractors to clear snow
from sidewalks.
888-PUSH-SNO
SPL Loader Model
Moldboard 48”, Sideplates 48” x 48”
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
SP10L
SP12L
SP14L
SP16L
SP18L
SP20L
SP24L
SP30L
2100 lbs
2200 lbs
2350 lbs
2500 lbs
2750 lbs
2900 lbs
3500 lbs
4500 lbs
1.25 yd Loader
1.5 yd Loader
2 yd Loader
3 yd Loader
3.25 yd Loader
3.25 yd Loader
3.25 yd Loader
3.25 yd Loader
12 yd
15 yd
18 yd
21 yd
23 yd
26 yd
31 yd
38 yd
10’
12’
14’
16’
18’
20’
24’
30’
Be sure to always use Pro-Tech
replacement parts.
RP1000: SPL Binder Kits
RP2010: Standard wear shoe SPL
RP2030: Heavy Duty wear shoe SPL
RP2050: Super Duty wear shoe SPL
RP2090: Self Leveling shoe SPL
RP2202: 10’ Rubber Cutting Edge SPL
RP2203: 12’ Rubber Cutting Edge SPL
RP2204: 14’ Rubber Cutting Edge SPL
RP2205: 16’ Rubber Cutting Edge SPL
RP2206: 18’ Rubber Cutting Edge SPL
RP2207: 20’ Rubber Cutting Edge SPL
RP2208: 24’ Rubber Cutting Edge SPL
RP2209: 30’ Rubber Cutting Edge SPL
RP1200: Level Gauge
Standard Features:
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- 1 1/2” x 10”
- Slotted to adjust
- Reversible
SPL Loader Model
www.snopusher.com
888-PUSH-SNO
SPB Backhoe Model
Moldboard 36”, Sideplates 36” x 36”
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
SP10B
SP12B
SP14B
1300 lbs
1450 lbs
1600 lbs
2 x 4 Backhoe
4 x 4 Backhoe
1.2 yd Backhoe
9 yd
11 yd
13 yd
10’ 12’
14’
Be sure to always use Pro-Tech
replacement parts.
RP1001: SPB Binder Kits
RP2011: Standard wear shoe SPB
RP2031: Heavy Duty wear shoe SPB
RP2051: Super Duty wear shoe SPB
RP2091: Self Leveling shoe SPB
RP2202: 10’ Rubber Cutting Edge SPB
RP2203: 12’ Rubber Cutting Edge SPB
RP2204: 14’ Rubber Cutting Edge SPB
RP1200: Level Gauge
Standard Features:
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- 1 1/2” x 10”
- Slotted to adjust
- Reversible
SPB Backhoe Model
www.snopusher.com
888-PUSH-SNO
SPS Skid Steer Model
Moldboard 36”, Sideplates 36” x 36”
Model Width
Approx. Weight
SP06S
SP08S
SP10S
SP12S
650 lbs
800 lbs
950 lbs
1100 lbs
6’ 8’
10’
12’
Be sure to always use Pro-Tech
replacement parts.
RP2011: Standard wear shoe SPS
RP2031: Heavy Duty wear shoe SPS
RP2051: Super Duty wear shoe SPS
RP2091: Self Leveling shoe SPS
RP2250: 6’ Rubber Cutting Edge SPS
RP2252: 8’ Rubber Cutting Edge SPS
RP2254: 10’ Rubber Cutting Edge SPS
RP2255: 12’ Rubber Cutting Edge SPS
RP1200: Level Gauge
Machine Application (Min.)
Snow
Capacity
36 - 46 HP Skid Steer
46 - 70 HP Skid Steer
70+ HP Skid Steer
85+ HP Skid Steer
5 yd
7 yd
9 yd
11 yd
Standard Features:
Fully Welded Construction
Universal Skid Steer Coupler*
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- 1” x 6”
- Slotted to adjust
- Reversible
* A quick change post receptacle attachment
is also available
SPS Skid Steer Model
www.snopusher.com
888-PUSH-SNO
IST Loader Model
ISL Moldboard 52”, Sideplate 48” X 62”
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
2300 lbs
2400 lbs
2550 lbs
2700 lbs
2950 lbs
3100 lbs
3700 lbs
1.25 yd Loader
1.5 yd Loader
2 yd Loader
3 yd Loader
3.25+ yd Loader
3.25+ yd Loader
3.25+ yd Loader
13 yd.
16 yd.
19 yd.
22 yd.
24 yd.
27 yd.
32 yd.
IS10L
IS12L
IS14L
IS16L
IS18L
IS20L
IS24L
10’
12’
14’
16’
18’
20’
24’
Standard Features:
Be sure to always use Pro-Tech
replacement parts.
RP1000 – ISL Binder Kits
RP2016 – Standard wear shoe for ISL
RP2036 – Heavy duty wear shoe for ISL
RP2057 – Super duty wear shoe for ISL
RP2702 – 10’ Steel Cutting Edge for ISL
RP2703 – 12’ Steel Cutting Edge for ISL
RP2704 – 14’ Steel Cutting Edge for ISL
RP2705 – 16’ Steel Cutting Edge for ISL
RP2706 – 18’ Steel Cutting Edge for ISL
RP2707 – 20’ Steel Cutting Edge for ISL
RP2708 – 24’ Steel Cutting Edge for ISL
RP2469 - IST Tensioner
RP1200 – Level Gauge
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Steel Cutting Edge
- 5/8” Hardened Steel Cutting Edge
- Components are easily replaceable
Pro-Tech specially patented IST replaces conventional
mechanical mechanisms
- 7” between moldboard and ground
-Smooth, non shocking tripping action
-Non evasive & safe
IST Loader Model
www.snopusher.com
888-PUSH-SNO
IST Backhoe Model
ISB Moldboard 40”, Sideplate 40” X 52”
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
IS10B
IS12B
IS14B
1500 lbs
1650 lbs
1800 lbs
2 x 4 Backhoe
4 x 4 Backhoe
1.2 yd Backhoe
10 yd.
12 yd.
14 yd.
10’
12’
14’
Standard Features:
Be sure to always use Pro-Tech
replacement parts.
RP1001 – ISB Binder Kits
RP2017 – Standard wear shoe for ISB
RP2037 – Heavy duty wear shoe for ISB
RP2058 – Super duty wear shoe for ISB
RP2702 – 10’ Steel Cutting Edge for ISB
RP2703 – 12’ Steel Cutting Edge for ISB
RP2704 – 14’ Steel Cutting Edge for ISB
RP2469 - IST Tensioner
RP1200 – Level Gauge
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Steel Cutting Edge
- 5/8” Hardened Steel Cutting Edge
- Components are easily replaceable
Pro-Tech specially patented IST replaces conventional
mechanical mechanisms
- 7” between moldboard and ground
-Smooth, non shocking tripping action
-Non evasive & safe
IST Backhoe Model
www.snopusher.com
888-PUSH-SNO
IST Skidsteer Model
ISS Moldboard 40”, Sideplate 40” X 52”
Model Width
Approx. Weight
800 lbs
950 lbs
1100 lbs
1250 lbs
IS06S
IS08S
IS10S
IS12S
6’
8’
10’
12’
Machine Application (Min.)
Snow
Capacity
36 - 46 HP Skid Steer
46 - 70 HP Skid Steer
70+ HP Skid Steer
85+ HP Skid Steer
6 yd.
8 yd.
10 yd.
12 yd.
Standard Features:
Be sure to always use Pro-Tech
replacement parts.
RP2017 – Standard wear shoe for ISS
RP2037 – Heavy duty wear shoe for ISS
RP2058 – Super duty wear shoe for ISS
RP2700 – 6’ Steel Cutting Edge for ISS
RP2701 – 8’ Steel Cutting Edge for ISS
RP2702 – 10’ Steel Cutting Edge for ISS
RP2703 – 12’ Steel Cutting Edge for ISS
RP2469 - IST Tensioner
RP1200 – Level Gauge
Fully Welded Construction
Universal Skid Steer Coupler
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Steel Cutting Edge
- 5/8” Hardened Steel Cutting Edge
- Components are easily replaceable
Pro-Tech specially patented IST replaces conventional
mechanical mechanisms
- 7” between moldboard and ground
-Smooth, non shocking tripping action
-Non evasive & safe
IST Skidsteer Model
www.snopusher.com
888-PUSH-SNO
Switchblade SBL Loader Model
SBL Moldboard 48”, Sideplate 48” X 48”; Now with IST Steel Trip Edges
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
SB10L
SB12L
SB14L
SB16L
SB18L
SB20L
2625 lbs
2750 lbs
2938 lbs
3125 lbs
3438 lbs
3625 lbs
1.25 yd. Loader
1.5 yd. Loader
2 yd. Loader
3 yd. Loader
3.25+ yd. Loader
3.25+ yd. Loader
12 yd.
15 yd.
18 yd.
21 yd.
23 yd.
26 yd.
10’
12’
14’
16’
18’
20’
Be sure to always use Pro-Tech
replacement parts.
RP1000 – SBL Binder Kits
RP2010 – Standard wear shoe for SBL
RP2030 – Heavy Duty wear shoe for SBL
RP2050 – Super Duty wear shoe for SBL
RP2090 – Self Leveling shoe for SBL
RP2202 – 10’ Rubber Cutting Edge for SBL
RP2203 – 12’ Rubber Cutting Edge for SBL
RP2204 – 14’ Rubber Cutting Edge for SBL
RP2205 – 16’ Rubber Cutting Edge for SBL
RP2206 – 18’ Rubber Cutting Edge for SBL
RP2207 – 20’ Rubber Cutting Edge for SBL
RP2720 – Steel Breakaway Edge for SBL
RP1200 – Level Gauge
Standard Features:
Fully Welded Construction
Two Sets of Quick Change Post Receptacles
- Fits any machine
Four Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Dual Cutting Edge System
- Rubber Side: 1 1/2” x 10”, reversible
- Steel Side: 5/8” Hardened Steel cutting edge
Components are easily replaceable
Pro-Tech specially patented IST replaces conventional
mechanical mechanisms
- 7” between moldboard & ground
- Smooth, non-shocking tripping action
- Non evasive & safe
The benefit of a rubber edge pusher & a steel edge
pusher combined in one unit.
Switchblade SBL Loader Model
www.snopusher.com
888-PUSH-SNO
Switchblade SBB Backhoe Model
SBB Moldboard 36”, Sideplate 36” X 36”; Now with IST Steel Trip Edges
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
SB10B
SB12B
SB14B
1625 lbs
1813 lbs
2000 lbs
2 x 4 Backhoe
4 x 4 Backhoe
1.2 yd. Backhoe
9 yd.
11 yd.
13 yd.
10’
12’
14’
Be sure to always use Pro-Tech
replacement parts.
RP1001 – SBB Binder Kits
RP2011 – Standard wear shoe for SBB
RP2031 – Heavy Duty wear shoe for SBB
RP2051 – Super Duty wear shoe for SBB
RP2091 – Self Leveling shoe for SBB
RP2202 – 10’ Rubber Cutting Edge for SBB
RP2203 – 12’ Rubber Cutting Edge for SBB
RP2204 – 14’ Rubber Cutting Edge for SBB
RP2722 – Steel Breakaway Edge for SBB
Standard Features:
Fully Welded Construction
Two Sets of Quick Change Post Receptacles
- Fits any machine
Four Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Dual Cutting Edge System
- Rubber Side: 1 1/2” x 10”, reversible
- Steel Side: 5/8” Hardened Steel cutting edge
Components are easily replaceable
Pro-Tech specially patented IST replaces conventional
mechanical mechanisms
- 7” between moldboard & ground
- Smooth, non-shocking tripping action
- Non evasive & safe
The benefit of a rubber edge pusher & a steel edge
pusher combined in one unit.
Switchblade SBB Backhoe Model
www.snopusher.com
888-PUSH-SNO
Switchblade SBS Skidsteer Model
SBS Moldboard 36”, Sideplate 36” X 36”; Now with IST Steel Trip Edges
Model Width
Approx. Weight
SB06S
SB08S
SB10S
SB12S
813 lbs
1000 lbs
1188 lbs
1375 lbs
6’
8’
10’
12’
Be sure to always use Pro-Tech
replacement parts.
RP2011 – Standard wear shoe for SBS
RP2031 – Heavy Duty wear shoe for SBS
RP2051 – Super Duty wear shoe for SBS
RP2091 – Self Leveling shoe for SBS
RP2250 – 6’ Rubber Cutting Edge for SBS
RP2252 – 8’ Rubber Cutting Edge for SBS
RP2254 – 10’ Rubber Cutting Edge for SBS
RP2255 – 12’ Rubber Cutting Edge for SBS
RP2722 – Steel Breakaway Edge for SBS
RP1200 – Level Gauge
Machine Application (Min.)
Snow
Capacity
36 - 46 HP Skid Steer
46 - 70 HP Skid Steer
70+ HP Skid Steer
85+ HP Skid Steer
5 yd.
7 yd.
9 yd.
11 yd
Standard Features:
Fully Welded Construction
Reversible Universal Coupler Mount for Skidsteers
Four Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Dual Cutting Edge System
- Rubber Side: 1 1/2” x 10”, reversible
- Steel Side: 5/8” Hardened Steel cutting edge
Components are easily replaceable
Pro-Tech specially patented IST replaces conventional
mechanical mechanisms
- 7” between moldboard & ground
- Smooth, non-shocking tripping action
- Non evasive & safe
The benefit of a rubber edge pusher & a steel edge
pusher combined in one unit.
Switchblade SBS Skidsteer Model
www.snopusher.com
888-PUSH-SNO
PBS/PBB Pull Back Model Moldboard 36”, Sideplates 36” x 36”
Model Width
Approx. Weight
PB06S
PB08S
PB10S
PB12S
PB10B
PB12B
800 lbs
975 lbs
1130 lbs
1260 lbs
1530 lbs
1700 lbs
6’
8’
10’
12’
10’
12’
Machine Application (Min.)
46 - 70 HP Skid Steer
70+ HP Skid Steer
85+ HP Skid Steer
85+ HP Skid Steer
4 x 4 Backhoe
1.2 yd Backhoe
Snow
Capacity
5 yd
7 yd
9 yd
11 yd
9 yd
11 yd
Enclosure option available
Be sure to always use Pro-Tech
replacement parts.
Standard Features:
Standard Features:
Fully Welded Construction
Universal Skid Steer Coupler for PBS models
Quick Change Post Receptacle Attachment for PBB
models
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- PBS models: 1” x 6”
- PBB models: 1 1/2” x 10”
- Slotted to adjust
- Reversible
RP1000 – PBB Binder Kit
RP2011 – Standard wear shoe for PBB/PBS
RP2031 – Heavy Duty wear shoe for PBB/PBS
RP2051 – Super Duty wear shoe for PBB/PBS
RP2091 – Self Leveling shoe for PBB/PBS
RP2250 – 6’ Rubber Cutting Edge for PBS
RP2252 – 8’ Rubber Cutting Edge for PBS
RP2254 – 10’ Rubber Cutting Edge for PBS
RP2255 – 12’ Rubber Cutting Edge for PBS
RP2202 – 10’ Rubber Cutting Edge for PBB
RP2203 – 12’ Rubber Cutting Edge for PBB
RP1200 – Level Gauge
Convert a standard skidsteer or backhoe
pusher into a pull back.
RP1201 - 6’ Pull Back Kit
RP1202 - 8’ Pull Back Kit
RP1203 - 10’ Pull Back Kit
RP1204 - 12’ Pull Back Kit
RP 1210 - 6’ Pull Back Enclosure Panel
RP1211 - 8’ Pull Back Enclosure Panel
RP1212 - 10’ Pull Back Enclosure Panel
RP1213 - 12’ Pull Back Enclosure Panel
PBS/PBB Pull Back Model
www.snopusher.com
888-PUSH-SNO
Super Duty Loader Model
SDL Moldboard 60”, Sideplate 62” X 88”
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
SD10L
SD12L
SD14L
SD16L
SD18L
SD20L
SD24L
SD30L
2800 lbs
3300 lbs
3800 lbs
4300 lbs
4800 lbs
5400 lbs
6400 lbs
8400 lbs
4+ yd Loader
4+ yd Loader
4.5+ yd Loader
4.5+ yd Loader
4.5+ yd Loader
4.5+ yd Loader
4.5+ yd Loader
4.55+ yd Loader
19 yd
23 yd
27 yd
31 yd
35 yd
39 yd
47 yd
57 yd
10’
12’
14’
16’
18’
20’
24’
30’
Standard Features:
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Super Duty Shoes
- 4x the life of regular shoes
- Extended length for self leveling
- 100% more surface area to further extend life
- Bolt on, Replaceable
Rubber Cutting Edge
- 2” x 12”
- Slotted to adjust
- Reversible
Be sure to always use Pro-Tech
replacement parts.
RP1003 – SDL Binder Kits
RP2056 – Super Duty wear shoe for SDL
RP2290 – 10’ Rubber Cutting Edge for SDL
RP2291 – 12’ Rubber Cutting Edge for SDL
RP2292 – 14’ Rubber Cutting Edge for SDL
RP2293 – 16’ Rubber Cutting Edge for SDL
RP2294 – 18’ Rubber Cutting Edge for SDL
RP2295 – 20’ Rubber Cutting Edge for SDL
RP2296 – 24’ Rubber Cutting Edge for SDL
RP2297 – 30’ Rubber Cutting Edge for SDL
RP1200 – Level Gauge
Super Duty Loader Model
www.snopusher.com
888-PUSH-SNO
SPC Compact Model
Moldboard 28”, Sideplates 28” x 28”
Model Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
SP06C
SP07C
SP08C
SP09C
SP10C
375 lbs
430 lbs
480 lbs
530 lbs
585 lbs
30 HP/ 2500 lbs
35 HP/ 3000 lbs
40 HP/ 3500 lbs
45 HP/ 4000 lbs
50 HP/ 4500 lbs
3 yd
3.5 yd
4 yd
4.5 yd
5 yd
6’ 7’
8’
9’
10’
Standard Features:
Be sure to always use Pro-Tech
replacement parts.
RP1002 – SPC Binder Kit
RP2012 – Standard wear shoe for SPC
RP2032 – Heavy Duty wear shoe for SPC
RP2052 – Super Duty wear shoe for SPC
RP2092 – Self Leveling shoe for SPC
RP2250 – 6’ Rubber Cutting Edge for SPC
RP2251 – 7’ Rubber Cutting Edge for SPC
RP2252 – 8’ Rubber Cutting Edge for SPC
RP2253 – 9’ Rubber Cutting Edge for SPC
RP2254 – 10’ Rubber Cutting Edge for SPC
RP1200 – Level Gauge
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- 1” x 6”
- Slotted to adjust
- Reversible
SPC Compact Model
www.snopusher.com
888-PUSH-SNO
APL/APB Angle Model
APL Moldboard 48”, Sideplate 48” x 48”
APB Moldboard 36”, Sideplate 36” x 36”
Model Width
Approx. Weight
AP12L
AP14L
AP16L
AP18L
AP20L
AP12B
AP14B
2000 lbs
2100 lbs
2250 lbs
2500 lbs
2650 lbs
1350 lbs
1500 lbs
12’
14’
16’
18’
20’
12’
14’
Machine
Application (Min.)
1.5 yd Loader
2 yd Loader
3 yd Loader
3.25 yd Loader
3.25 yd Loader
4 x 4 Backhoe
1.2 yd Backhoe
Be sure to always use Pro-Tech
replacement parts.
Standard Features:
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- 1 1/2” x 10”
- Slotted to adjust
- Reversible
RP1000 – APL Binder Kit
RP1001 – APB Binder Kit
RP2010 – Standard side wear shoe for APL
RP2030 – Heavy Duty side wear shoe for APL
RP2050 – Super Duty side wear shoe for APL
RP2090 – Self Leveling side wear shoe for APL
RP2011 – Standard side wear shoe for APB
RP2031 – Heavy Duty side wear shoe for APB
RP2051 – Super Duty side wear shoe for APB
RP2091 – Self Leveling side wear shoe for APB
RP2014 – Standard rear small wear shoe for APL/APB
RP2034 – Heavy Duty rear small wear shoe for APL/APB
RP2054 – Super Duty rear small wear shoe APL/APB
RP2330 – 12’ Rubber Cutting Edge for APL/APB
RP2331 – 14’ Rubber Cutting Edge for APL/APB
RP2332 – 16’ Rubber Cutting Edge for APL
RP2333 – 18’ Rubber Cutting Edge for APL
RP2334 – 20’ Rubber Cutting Edge for APL
RP1200 – Level Gauge
APL/APB Angle Model
www.snopusher.com
888-PUSH-SNO
FPL/FPB Fold Out Model
FPL Moldboard 48”, Sideplates 48” x 48”
FPB Moldboard 36”, Sideplates 36” x 36”
Model
Width
Approx. Weight
Machine Application (Min.)
Snow
Capacity
3450 lbs
3650 lbs
3850 lbs
4050 lbs
1920 lbs
2070 lbs
2220 lbs
1.5 yd Loader
2.5 yd Loader
3.5 yd Loader
4.5 yd Loader
4x4 1.25 yd Backhoe
4x4 1.25 yd Backhoe
4x4 1.25 yd Backhoe
19 yd
21 yd
23 yd
26 yd
11 yd
13 yd
15 yd
FP14L
FP16L
FP18L
FP20L
FP12B
FP14B
FP16B
13’10”/ 102”
15’10”/ 102”
17’10”/ 102”
19’10”/ 102”
11’9”/ 98”
13’9”/ 98”
15’9”/ 98”
Be sure to always use Pro-Tech
replacement parts.
Standard Features:
Fully Welded Construction
Quick Change Attachment
- Post Receptacle connection
- Fits any machine
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- 1 1/2” x 10”
- Slotted to adjust
- Reversible
RP1004 – FPL Binder Kits
RP1005 – FPB Binder Kits
RP2010 – Standard wear shoe for FPL
RP2030 – Heavy Duty wear shoe for FPL
RP2050 – Super Duty wear shoe for FPL
RP2090 – Self Leveling shoe for FPL
RP2011 – Standard wear shoe for FPB
RP2031 – Heavy Duty wear shoe for FPB
RP2051 – Super Duty wear shoe for FPB
RP2091 – Self Leveling shoe for FPB
RP2360 – 12’ Rubber Cutting Edge for FPB/FPL
RP2361 – 14’ Rubber Cutting Edge for FPB/FPL
RP2362 – 16’ Rubber Cutting Edge for FPB/FPL
RP2363 – 18’ Rubber Cutting Edge for FPL
RP2364 – 20’ Rubber Cutting Edge for FPL
RP1200 – Level Gauge
FPL/FPB Fold Out Model
www.snopusher.com
888-PUSH-SNO
FTF Forklift Model
Moldboard 36”, Sideplates 36” x 36”
Model Width
Approx. Weight
Machine Application (Min.)
FT06F
FT08F
FT10F
FT12F
FT14F
950 lbs
1100 lbs
1250 lbs
1400 lbs
1550 lbs
5,000 lb machine
6,000 lb machine
8,000 lb machine
8,000 lb machine
10,000 lb machine
6’
8’
10’
12’
14’
Be sure to always use Pro-Tech
replacement parts.
RP1001 – FTF Binder Kit
RP2011 – Standard wear shoe for FTF
RP2031 – Heavy Duty wear shoe for FTF
RP2051 – Super Duty wear shoe for FTF
RP2091 – Self Leveling shoe for FTF
RP2200 – 6’ Rubber Cutting Edge for FTF
RP2201 – 8’ Rubber Cutting Edge for FTF
RP2202 – 10’ Rubber Cutting Edge for FT
RP2203 – 12’ Rubber Cutting Edge for FT
RP2204 – 14’ Rubber Cutting Edge for FT
RP1200 – Level Gauge
Snow
Capacity
5 yd
7 yd
9 yd
11 yd
13 yd
Standard Features:
Fully Welded Construction
Fork Tube Receivers
- 3” x 8” Fork Tube Holes
- Receivers protrude out 17 1/2” from moldboard
Wear Shoes
- Hardened AR Abrasion Resistant Plate
- Bolt on, Replaceable
Rubber Cutting Edge
- 1 1/2” x 10”
- Slotted to adjust
- Reversible
FTF Forklift Model
www.snopusher.com
888-PUSH-SNO
VPS Heavy Duty V-Plow Model
Plow is 60” wide and 36” tall”
Plow weight is approximately 700 lbs
Be sure to always use Pro-Tech
replacement parts.
RP2015 – Standard Wear Shoe for VPS
RP2035 – Heavy Duty Wear Shoe for VPS
RP2055 – Super Duty Wear Shoe for VPS
RP2730 – Steel Cutting Edge for VPS
Standard Features:
Heavy duty, fully welded construction
Universal Skid Steer Coupler
Wear Shoe
- 5/8” thick shoe
Cutting Edge
- 5/8” x 8” steel edges
Plow comes complete and ready to use
VPS Heavy Duty V-Plow Model
www.snopusher.com
888-PUSH-SNO
www.snopusher.com
Make your Pushers more efficient by upgrading your parts
Shoe Strength
Shoe Type
Approximate
Brunell Rating
Regular Shoe
400 (380 - 440)
Heavy Duty
Shoe
500 (440 - 500)
Super Duty
Shoe
600 (475 - 550)
Typical
Wear Life
Weight
Loader size (48” long) 120 lbs/ shoe
Backhoe/ Skid size (37” long) 60 lbs/ shoe
2x Regular Shoe
Loader size (48” long) 120 lbs/ shoe
Backhoe/ Skid size (37” long) 60 lbs/ shoe
4x Regular Shoe
Loader size (48” long) 120 lbs/ shoe
Backhoe/ Skid size (37” long) 60 lbs/ shoe
Shoe Options
UHMW Shoe
• This shoe has a UHMW, or polyurethane, pad bolted on to the bottom of it
• Great in applications were a steel bottomed shoe will damage your plowing surface
• The UHMW pad cannot be bolted to a standard shoe, must be bolted on our thinner bottomed shoe designed for a UHMW pad
Extended or Self Leveling Shoe
• This shoe style extends off the back end of the Pusher by 16”
• This eliminates excess down pressure on the back of the shoe
• Keeps a the pusher level and balanced, creating an even amount of pressure throughout the whole length of the shoe
• Increased surface area actually increases the lifespan of the shoe
• Length of a standard loader shoe: 48” • Length of a standard backhoe/ skidsteer shoe: 36”
• Length of an extended loader shoe: 64” • Length of an extended backhoe/ skidsteer shoe: 52”
888-PUSH-SNO
www.snopusher.com
Level Gauge
This handy tool attaches to the Sno Pusher and lets the operator know that the unit is level, to optimize snow removal.
Save dollars on wear shoe replacement by avoiding uneven wear on Sno Pushers. Fits all Sno Pusher models!
Unit level
Hydraulic Fold Out
Unit not level
Quick fold your Fold Out Pusher wings from the comfort of your cab.
Comes in both 12 volt or 3rd valve styles.

Similar documents

2015 product catalog - Pro

2015 product catalog - Pro perform exceptionally, are priced right, and readily available.

More information