Test Report

Transcription

Test Report

I
B
Test
Report
PCIE-9450
Created By:
Angel Yu
Revised By:
Hj Hsu
Date Created:
2005 / 12 / 30
Date Last Updated:
2006 / 03 / 01
PCB Version
1.1
Sample Quantity
3
BIOS Version:
Revision:
PCIE-9450 V1.0
(11/16/2005)
V1.1
Executed By:
Lun Lee
DATE COMPLETED:
2006 / 03 / 01
Approved By:
Mars Jiang
II
Table of Contents
1.0
INTRODUCTION.............................................................................................................. 1
2.0
FUNCTIONAL EXERCISES ........................................................................................... 2
2.1
3.0
TEST SOFTWARE ................................................................................................................ 2
DQV CHECK LIST ........................................................................................................... 3
3.1
AMI BIOS TEST RESULT .................................................................................................. 3
3.2
OPERATION SYSTEM TEST RESULT .................................................................................... 5
4.0
HARDWARE TEST RESULT .......................................................................................... 6
5.0
RELIABILITY TEST RESULT ....................................................................................... 8
5.1
TEMPERATURE TEST RESULT ............................................................................................. 8
5.1.1
Cold Boot ................................................................................................................. 8
5.1.2
Warm Boot................................................................................................................ 9
5.2
6.0
POWER ON/OFF TEST RESULT ........................................................................................... 9
HARDWARE TEST LOG............................................................................................... 10
6.1
EUT I NFORMATION (MISC.) ............................................................................................ 10
6.1.1
CPU........................................................................................................................ 10
6.1.2
Memory .................................................................................................................. 10
6.1.3
Hard Drive ............................................................................................................. 11
6.1.4
CD-ROM Drive...................................................................................................... 11
6.1.5
Floppy Drive .......................................................................................................... 12
6.1.6
USB Drive .............................................................................................................. 12
6.1.7
Power Supply ......................................................................................................... 12
6.1.8
Backplane............................................................................................................... 12
6.1.9
Add on Card ........................................................................................................... 13
7.0
SYSTEM PERFORMANCE TEST................................................................................ 14
7.1
SYSTEM PERFORMANCE TEST ......................................................................................... 14
7.2
PCI-E 16X VGA CARD PERFORMANCE TEST ............................................................... 17
8.0
8.1
THERMAL ANALYSIS RESULT .................................................................................. 18
SYSTEM CONFIGURATION ................................................................................................ 18
III
8.2
HARDWARE TEST EQUIPMENT ......................................................................................... 18
8.2.1
Infrared Thermography.......................................................................................... 18
8.2.2
TVS-700 Specifications .......................................................................................... 19
8.3
SOFTWARE TEST PROGRAMS & TOOLS............................................................................ 20
8.3.1
Front Side............................................................................................................... 20
8.3.2
High Temperature Area.......................................................................................... 20
8.3.3
Back Side................................................................................................................ 21
8.3.4
High Temperature Area.......................................................................................... 21
8.4
USB 2.0 HIGH SPEED COMPLIANCE TEST ....................................................................... 22
8.5
BUS-POWERED DROOP TEST ........................................................................................... 23
8.6
TEKTRONIX STAT TEST .................................................................................................. 24
8.7
TEKTRONIX PCI-E TEST ................................................................................................. 26
8.8
NUSTREAMS IPC NIC TEST............................................................................................ 28
8.8.1
Data Integrity Test Setting...................................................................................... 28
8.8.2
Transmit Performance Test Setting ........................................................................ 29
8.8.3
Receive Performance Test Setting.......................................................................... 30
8.8.4
Round Trip Time Test Setting.................................................................................. 31
8.8.5
Media Type Test Setting.......................................................................................... 31
9.0
ENVIRONMENTAL TESTS .......................................................................................... 32
9.1
TEMPERATURE FACTOR ................................................................................................... 32
9.2
COLD BOOT..................................................................................................................... 33
9.3
WARM BOOT ................................................................................................................... 33
9.4
POWER ON/OFF TEST ...................................................................................................... 33
10.0
APPENDIX A ................................................................................................................... 34
10.1
BOOT SEQUENCE: ............................................................................................................ 34
10.1.1
Loading the CD-ROM Driver:............................................................................... 34
10.1.2
Printer setup: ......................................................................................................... 34
11.0
APPENDIX B: DRIVER LOADING INFORMATION, NOTES, ISSUES ETC… .. 35
12.0
TEST REVISION HISTORY.......................................................................................... 36
IV
1.0 Int roduction
The following procedure should be followed for testing all hardware compatible products.
These are generic tests that will help ensure hardware compatibility with other PC devices and
software. Any board-specific features should be tested accordingly. Because this test plan is a
generic test plan that doesn’t cover features that vary and are specific to the Mother Board and the
BIOS it is using other test plans may be required. See the BIOS test plan for tests specific to BIOS
feature validation. Use the touch screen validation test plan for touch screen validation etc. Features
tested in other test plans do not need to be repeated for this test plan.
The test results should be recorded individually as each test is performed. If all of the listed
sections of each test pass then check the passed box. If a failure occurs in any given section of a
test then make a note of the failure in the comments space for that test. If the tests do not pass, or
cannot be run, then check the failed box. Log any anomalies even if it’s not considered a failure.
BIOS revision, Driver revision, OS type and revision (i.e. Service Pack) and test software
revision information must be recorded here (for tracking purposes, when identifying or attempting
to recreate issues during debug).
Specific instructions needed to load the drivers correctly must also be recorded here if there
are any. They may be placed in the Appendix. B
The tests are divided into several categories:
Diagnostics
Benchmarks
Applications
Operating Systems
Hardware compatibility
1
2.0 Functional Exercises
2.1
Test Software
M.C.C Winstone 2004
Revision 1.0
Check-it for DOS
Revision 3.0
QTpro for DOS
Revision 3.2
Business Winstone 2004
Revision 1.0.1
3DMark 2001 SE Build 330
Revision 3.3
SiSoftware Sandra 2005.SP2a
Revision 1.0
HD Tach
Revision 3.0.1
Microsoft DOS
Revision 6.22
Microsoft Windows 2000
SP4
Microsoft Windows XP Professional
SP2
Hardware Compatibility Test (HCT)
11.2
2
3.0 DQV Check List
Na me
ICP Mo de l No.
Date
BIOS Ve rsio n / File Na me
S240
PCIE-9450 V1.1
2005/12/30
V1.0 / S240R10.B16
3.1
AMI BIOS Test Result
Date
BIOS Ve rsio n / File Na me
Te st Engine e r:
2005/12/30
V1.0 / S240R10.B16
Hj Hsu
Te st Ite m
Main Function
Advanced
Function
Te st De script io n
Te st Re sult
(Pass/Fail)
1) System overview
Pass
2) System Time
Pass
3) System Date
Pass
4) CPU Configuration
Pass
Te st Proce dure
Max CPU ID Value Limit
Hyper Threading Technology
5) IDE Configuration
Pass
ATA/IDE Configuration
Compatible/Enhanced Test
6) FDC Enable/Disable Test
Pass
7) Super IO Configuration
Pass
COM Port Function Test
COM1 disable & Use COM 2
COM2 disable & Use COM 1
COM1 & COM2 Swap
Parallel Port Function Test
8) Print function on DOS6.22 / Windows XP
Pass
9) IRDA Function Test
Pass
3
10) Hardware Monitor check
Pass
11) DMI/Power Management Function Test
Pass
S1 / S3
(ACPI)
12) APM Configuration Test
Pass
Power Management/APM [Enabled /
Disabled]
Power Button Mode [On/Off / Suspend]
Restore on AC Power Loss
Resume on Ring
Resume on LAN
Resume on RTC Alarm
Boot Function
Security
13) USB Function Test (1.1/2.0)
Pass
USB Floppy Boot
Pass
USB CD-ROM Boot
Pass
USB HDD Boot
Pass
USB Flash Disk Boot
Pass
14) Quick Boot [Enabled / Disabled]
Pass
15) Quiet Boot [Enabled / Disabled]
Pass
16) Bootup Num-Lock [On/Off]
Pass
17) LAN Boot Rom Test
Pass
18) ZIP-100 / ZIP-250 Support Test (Boot)
Pass
19) CD-ROM Boot Test
Pass
20) Change Supervisor password
Pass
Always USB device boot first!
Change User Password
21) On Board VGA Function Test
Pass
Display Mode Test
Pass
Chipset Function 2D Display Test
Pass
3D Display Test
Pass
4
22) On Board LAN Function Test
Pass
(Download /upload enable/disable)
23) Audio Function Test
Download Avg :24Mbytes
Upload Avg : 18Mbytes
Pass
(Play / Record enable/disable)
24) RTC/System Clock Test
Pass
60hrs RTC lose 3 sec
System fast 4 sec
25) Boot without Keyboard & Display Card
Pass
Test
Other Function
3.2
26) Linux Boot Test
Pass
27) Y2K Support Test
Pass
28) Driver Test
Pass
29) DIO Function Test
Pass
Operation System Test Result
Te st Re sult
(Pass/Fail)
DOS 6.22
Pass
Windows 2K / XP / 2003
Pass
Red Hat 9.0
Pass
SuSe 9.0
Pass
Re ma rk
5
4.0 Hardware Test Result
Date
PCB Ve rsio n
Te st Engine e r:
2005/12/30
1.1
Lun Lee
Te st Ite m
Jumper Setting
and
Connector Test
Te st Re sult
(Pass/Fail)
Clear CMOS
Pass
Front Panel – Reset Button
Pass
Front Panel - Power LED
Pass
Front Panel - HDD LED
Pass
Front Panel – Speaker
Pass
PS/2 Mouse & Keyboard Port
Pass
PS/2 Keyboard Port (KB1)
Pass
USB Ports Connector (1-7 Ports)
Pass
Parallel Port Connector
Pass
Serial Port Connector
Pass
Stand by Power Connector
Pass
Power Connector
Pass
FAN 1/2 Connector
Pass
CPU Power Connector
Pass
IrDA Infrared Interface Port
Pass
Digital I/O Connector
Pass
DDRII 1 / DDRII 3
Pass
DDRII 2 / DDRII 4
Pass
Te st Proce dure
Memory Test
Onboard Function On Board VGA Function
Pass
6
Test
On Board IDE Function
Pass
On Board SATA Connector
Pass
Compact Flash Card socket
N/A
On Board LAN Function
Pass
CD_IN Connector
N/A
Side Speaker out Connector
Pass
SPDIF_OUT Connector
Pass
Front Audio Connector
Pass
HD Audio Link Signals Connector
Pass
Digital I/O Connector
Pass
IrDA Infrared Interface Port
Pass
PCI1
Pass
PCI2
Pass
Add on Card Slot PCI-Express 16X
Pass
PCI-Express 4X
Pass
PCI-Express 1X
Pass
7
5.0 Reliability Test Result
Date
PCB Ve rsio n
Te st Engine e r:
2005/12/30
1.1
Angel Yu
System Configuration ：
BIOS： PCIE-9450 V1.0 11/16/05
CPU: Intel Pentium 4 2.8 GHz FSB 800 MHz (Dual code)
Memory： Apacer DDR2 UNB PC4300 CL4 512MB*4
VGA Card： On Board Intel 82945G / Display Reso lution : 1024x768, 32 bit Co lor
HDD： HITACHI HDS722512 VL AT20 123.5 GB
O.S.： Windows XP professional version 2002 service pack 2
Power： AcBel ATX-400C-A2ADB 400W
5.1
Temperature Test Result
Te st Re sult
Re ma rk
(Pass/Fail)
60℃ Burn-in 12 Hours
Pass
Run HCT11.2 System stress burn in test
-20℃ Burn-in 12 Hours
Pass
Run HCT11.2 System stress burn in test
5.1.1
Cold Boot
Ite m
Te mp.
P/S Off
1
-20℃
1 Hour
2
-20℃
3
60℃
4
60℃
On/Off
Te st Re sult (Pass/Fail)
Re ma rks
Pass
100 Times
1 Hour
Pass
Pass
100 Times
Pass
8
5.1.2
Warm Boot
Ite m
Te mp.
P/S Off
1
-20℃
1 Hour
2
-20℃
3
60℃
4
60℃
5.2
On/Off
Te st Re sult (Pass/Fail)
Re ma rks
Pass
100 Times
1 Hour
Pass
Pass
100 Times
Pass
Power On/Off Test Result
Te st Time s
Pass Time s
Fa il T ime s
Re ma rk
25℃
1500
1500
0
ATX
60℃
1000
1000
0
ATX
-20℃
1000
1000
0
ATX
9
6.0 Hardware Test Log
Please include a description of all hardware used during testing.
important.
6.1
Model and Serial number are
EUT Information (Misc.)
6.1.1
CPU
Mfg.
Mo de l
Ca pacity/Spe e d
Inte rface
De scriptio n
Dual code
Intel
820
Pentium 4 2.8GHz
Socket 775
FSB:800MHz
Dual code
Intel
840
Pentium 4 3.2GHz
Socket 775
FSB:800MHz
Dual code
Intel
650
Pentium 4 3.4GHz
Socket 775
FSB:800MHz
Intel
520
Pentium 4 2.8GHz
Socket 775
FSB:800MHz
Pentium 4 3.73GHz
Socket 775
FSB:1066MHz
Intel
Dual code
6.1.2
Intel
670
Pentium 4 3.8GHz
Socket 775
FSB:800MHz
Intel
560
Pentium 4 3.6GHz
Socket 775
FSB:800MHz
Intel
506
Pentium 4 2.66GHz
Socket 775
FSB:533MHz
Intel
346
Celeron D 3.06GHz
Socket 775
FSB:533MHz
Intel
336
Celeron D 2.8GHz
Socket 775
FSB:533MHz
Intel
331
Celeron D 2.66GHz
Socket 775
FSB:533MHz
Memory
Mfg.
Dual Channel
512MB*4
Dual Channel
1GB*4
Dual Channel
512MB*4
Mo de l
Ca pacity/Spe e d
Inte rface
De scriptio n
ELPIDA
Apacer
UNB PC4300 CL4
512MB
DDR2
E5108AB-5C-E
05060WQKG
Kingston
KHX5400D2K2/2G
1GB
DDR2
Kingston
KHX5400D2K2/1G
512MB
DDR2
10
Dual Channel
2GB*2
Dual Channel
512MB*4
Transcend
2G DDR2 533
2GB
DDR2
ELPDA
Transcend
512MB DDR2 667
512MB
DDR2
Hynix Hy5ps12821A
Twinmos
PC2-4300
256MB
DDR2
8D221B-ED
ellxir
PC2-4200U
512MB
DDR2
Dual Channel
256MB*4
Dual Channel
512MB*4
6.1.3
M2U51264TU88A0F37B
Hard Drive
Mfg.
Mo de l
Ca pacity/Spe e d
Inte rface
Maxtor
6Y120P0032211
120GB
IDE
Maxtor
4G160J8
160GB
IDE
Maxtor
6B300R0
300GB
IDE
SAMSUNG
SP1203N
120GB
IDE
Seagate
ST380011A
80GB
IDE
Seagate
ST330083LA
300GB
IDE
HITACHI
HDS722512VLAT20
123.5GB
IDE
HITACHI
HDS722580VLSA80
82.3GB
SATA
SATA I
HITACHI
HDT722525DLA380
250GB
SATA
SATAII
WD
WD2500KS-00MJB0
250GB
SATA
SATAII
Maxtor
SATA 150 HD
120GB
SATA
SATAI
De scriptio n
6.1.4
De scriptio n
CD-ROM Drive
Mfg.
Mo de l
Ca pacity/Spe e d
Inte rface
Benq
652A
52X
CD-ROM
LITE-ON
16X SOHC-5232
52X
LITE-ON
LTD163D
52X
DVD-ROM
DVD-E616P1
16X
DVD-ROM
ASUS
CD-RW/DVD
-ROM
IDE
11
6.1.5
Floppy Drive
Mfg.
Mo de l
Ca pacity/Spe e d
Inte rface
TEAC
FD-235HF
1.44”
FDC
Panasonic
JU-256A198P
1.44”
FDC
Mfg.
Mo de l
Ca pacity/Spe e d
Inte rface
De scriptio n
MITSUMI
D353FUE
1.0
USB
Floppy
IBM
MDF82E
1.0
USB
Floppy
Microsoft
RT9401
1.0
USB
Keyboard
GENUINE
1GB
2.0
USB
Flash Disk
1.0
USB
DVD-ROM
1.0
USB
Wheel Mouse
USB
Printer
De scriptio n
6.1.6
USB Drive
LITE-ON
CR-R2-U2-LSC24081
Logitech
M-BJ58
Canon
i6100
6.1.7
Power Supply
Mfg.
Mo de l
Ca pacity/Spe e d
Inte rface
FSP
FSP460-
400W
ATX
SevenTeam
ST-350BKV
350W
ATX
AcBel
ATX-400C-A2ADB
400W
ATX
6.1.8
Backplane
Test Description
1) PE-6S V1.0
2) PE-10S V1.0
De scriptio n
Test Result (Pass/Fail)
Remark
Pass
Pass
12
6.1.9
Add on Card
Mfg.
Mo de l
ICP
Inte rface
De scriptio n
IVC-200
PCI
Capture Card
Creative
Sound Blaster CT4670
PCI
Sound Card
Adaptec
Adaptec 29160
PCI
SCSI Card
Adaptec
Adaptec 2940UW PRO
PCI
SCSI Card
Intel 82543
PCI
Gigabit LAN Card
Intel 82545
PCI
Gigabit LAN Card
Intel
Intel
Intel® PRO/1000T Server
Adapter
Intel® PRO/1000T Server
Adapter
Ca pacity/Spe e d
3COM
3C905B-TX
PCI
10/100 LAN Card
SUNIX
LAN 1400
PCI-E 1x
LAN Card
SUNIX
SATA 2400
PCI-E 1x
SATA II RAID Card
Realtek
8168
PCI-E 1x
Gigabit LAN Card
Gigabyte
GV-NX66T128D
PCI-E 16x
VGA Card
PCI-E 16x
VGA Card
ASUS
EXTREME
AX800XT/2DT
SATA II
Ndivia GeForce
6600GT
ATI X800
13
7.0 System Perf ormance Test
7.1
System Performance Test
System Configuration
BIOS
Memory
：PCIE-9450 V1.0 2005/11/16
： elixir DDR2 4200 U 512MB*4 (M2 TU51280 AF-37B)
VGA Card ： On Board Intel 82945G / Display Reso lution : 1024x768, 32 bit Co lor
HDD
：SEAGATE ST3120026A 120GB
SATA HDD： Seagate ST3250824AS 250GB ( SATA II)
Western Digital WD2500KS-00MJB0 250GB ( SATA II)
DVD-ROM：LITE-ON 16 X SOHC-5232K CD-RW/DVD-R OM
O.S
：Windows XP professional serv ice pack 2
Power
：Seventeam ST-350BKV 350W
Intel
Pentium 4
3.8 GHz 2M
FSB 800MHz
Intel
Pentium 4
3.73 GHz 2M
FSB 1066MHz
Intel
Pentium 4 *1
3.2 GHz 2M
FSB 800MHz
Intel
Pentium 4
2.66GHz 1M
FSB 533MHz
Intel
Celeron D
3.06 GHz 256
FSB 533MHz
Business Winstone 2004
V1.0.1
24.6
24.3
22.1
19.5
18.3
M.C.C Winstone 2004 V1.0.1
33.4
34.1
31.6
25.4
25
3DMark® 2003 build V3.6.0
1639
1634
1555
1476
1466
ZD CPUmark™ 99 Ver: 1.0
221
217
188
157
156
PCMARK™ 04 build 1.3.0
4980
4368
5346
3203
3466
CPU
Program
SiSoftware Sandra 2005 SR3
CPU Arithmetic Benchmark
(HT Enable) *2
ALU:
11090
ALU:
10886
ALU:
17268
ALU:
7178
ALU:
8248
iSSE3:
7752
iSSE3:
7631
iSSE3:
8098
iSSE3:
3371
iSSE3:
3855
CPU Arithmetic Benchmark
(HT Disable) *2
ALU:
10055
ALU:
9875
ALU:
17168
ALU:
7181
ALU:
8255
iSSE3:
4817
iSSE3:
4729
iSSE3:
8103
iSSE3:
3369
iSSE3:
3877
CPU Multi-Media Benchmark
(HT Enable) *3
Integer: 27245
Integer: 20974
Integer: 35912
Integer: 14946
Integer: 17191
Float: 36158
Float: 24780
Float: 42568
Float: 17669
Float: 20320
CPU Multi-Media Benchmark
(HT Disable) *3
Integer: 21362
Integer: 26770
Integer: 35948
Integer: 14944
Integer: 17193
Float: 25240
Float: 35518
Float: 42585
Float: 17664
Float: 20308
14
SiSoftware 2005 Sandra SR3
Memory Bandwidth
Benchmark
(HT Enable) *4
HD Tach V3.0.1.0 – Read
Speed
IDE Port
Int Buff: 4861
Int Buff: 5833
Int Buff: 4879
Int Buff: 3281
Int Buff: 3334
Float Buff: 4862
Float Buff: 5885
Float Buff: 4900
Float Buff: 3286
Float Buff: 3331
Average Read Speed: 45.5MB/s
CPU utilization: 2%
Average Read Speed: 56MB/s
HD Tach V3.0.1.0 - Read Speed
SATA Ⅱ (Seagate 250GB*1)
CPU utilization: 2%
Burst speed: 204.8MB/s
RAID0
RAID1
CPU utilization: 4%
CPU utilization: 4%
(WD 250GB*2)
RAID0
(WD 250GB*2)
RAID10 (0+1)
Average Read Speed: 102MB/s
(WD 250GB*1)
RAID5
CPU utilization: 5%
CPU utilization: 4%
CPU utilization: 4%
RAID1
Rebuild time: 78 minutes
(WD 250GB*2)
RAID10
(WD 250GB*1)
RAID5
15
*1 Pent i um 4 3.2 GHz support Daul Code
*2 CPU Arit hmet i c Benchmark
ALU
Dhrystone ALU
MIPS
FPU
Whetstone FPU
MFLOPS
iSSE2
Whetstone iSSE2
MFLOPS
*3 CPU Multi-Media Benchmark
Integer
Float
Integer x8 iSSE2 it/s
Float x4 iSSE2
it/s
*4 Me mory Bandwi dt h Benchmark
Int Buff
RAM Bandwidth Int Buff’d iSSE2
Float Buff
RAM Bandwidth Float Buff’d iSSE2
MB/s
MB/s
SATA Port mapping
Hardwa re port
Software port
Status
Seagate ST3250824AS
SATA1
Pass
Seagate ST3250824AS
SATA2
Pass
WD WD2500KS-00MJB0
SATA3
Pass
WD WD2500KS-00MJB0
SATA4
Pass
16
7.2
BIOS
Memory
PCI-E 16X VGA CARD Performance Test
：PCIE-9450 V1.0 2005/11/16
： elixir DDR2 4200 U 512MB*4 (M2 TU51280 AF-37B)
HDD
：SEAGATE ST3120026A 120GB
DVD-ROM：LITE-ON 16 X SOHC-5232K CD-RW/DVD-R OM
O.S
：Windows XP professional serv ice pack 2
Power
：Seventeam ST-350BKV 350W
VGA
PRO
3DMark® 2005Pro
V3.6.0
ASUS
EAX800XT-A319
Gigabyte
ASUS
NVIDIA GeForce
6600GT
NVIDIA GeForce
EN6600LE
3679
1587
5154
With CPU Intel Pentium 4 3.8 GHz FSB 800MHz (2M)
17
8.0 Thermal Analysis Result
8.1
System Configuration
Ope ratio n Syste m
Windows XP professional version 2002 service pack 2
CPU
P4 3.2GHz (Dual Code) /800MHz
Me mo ry
Apacer UNB PC4300 CL4 512MB X 4
Hard Drive
SAMSUNG SP1203N 120GB
DVD-RO M
ASUS DVD-E616P1 16X
Powe r Supply
Seventeam ST-350BKV 350W
8.2
Hardware Test Equipment
8.2.1
Infrared Thermography
Co mpa ny
NIPPON AVIONICS CO.,LTD.
Mo de l
Neo Thermo TVS-700
18
8.2.2
TVS-700 Specifications
Te mp. Ra nge
-20℃ ~ 500℃
Te mp. Re solutio n
0.08°C at 30°C Black Body (0.05°C or less with averaging)
Fra me Rate
30Hz (NTSC)
De te ctor
320(H) x 240(V) Uncooled Microbolometer
Spe ctral Ra nge
8 to 14μm
FOV
26.0°(H) x 19.6°(V)
Spatia l Re solutio n
1.4 mrad
Foc us Ra nge
30cm to ∞
Corre ction
Emissivity/Reflection Correction, Amb. Temp. Correction, Drift Correction, 2 Point
Correction
Dis play
3.8" Color LCD Monitor, Color View Finder (option)
Ra nge Se tting
Auto Range Setting(Auto Sens, Auto Point), Manual Setting
Image Improve me nt
Averaging (2,4,8,16)
Ope rating Te mp
0°C to 40°C
19
8.3
Software Test Programs & Tools
3Dmark 2001 build 330 (Loading Test for Windows)
TVS Viewer 3
TAS Thermal Analysis Utility
8.3.1
Front Side
8.3.2
High Temperature Area
Chipse t or Co mpo ne nt
U12
U8
L24
Temperature
52.2℃
50.5℃
50.7℃
20
8.3.3
Back Side
8.3.4
High Temperature Area
Clock
Chipse t or Co mpo ne nt
Q21
Q45
Q35
Q59
56.3℃
59.7℃
52.1℃
52.2℃
Ge ne rator
Temperature
69℃
21
8.4
USB 2.0 High Speed Compliance Test
Waveform Plot :
Eye Diagram :
22
Results based on USB-IF / Waiver Limits :
Measurement
Name
Maximum
Mean
pk-pk
-
-
-
-
-
-
0
Pass
-
-
-
-
-
-
-
Pass
513
Pass
Monotonic
Property
Eye Diagram
Test
Signal Rate
Standard
Minimum
Deviation
RMS
476.7880Mbps 485.4165Mbps 479.9784Mbps 0.0000bps 21.439620Mbps 480.1847Mbps
EOP Width
Population Status
-
-
16.62308ns
-
-
-
1
Pass
-
-
7.978718
-
-
-
1
Pass
Rise Time
562.8978ps
723.2970ns
633.7877ps
160.3992ps
42.29369ps
635.1841ps
107
Pass
Fall Time
561.4771ps
740.1694ns
631.3032ps
178.6924ps
48.65490ps
633.1579ps
107
Pass
EOP Width
(Bits)
8.5
Bus-Powered Droop Test
Me asure me nt Na me
Me asure d Droo p Voltage
USB L imits
Status
Droop Test
179.36mV
<330mV
Pass
23
8.6
Tektronix STAT Test
Measurement
Overall
Median to Peak
Peak to Peak
Eye
Name
Result
Jitter
Jitter
Violations
STAT 1
Pass
2.986516 GB/s
25.593211 ps
41.671019 ps
0 points
Pass
STAT 2
Pass
2.986373 GB/s
19.477071 ps
30.163725 ps
0 points
Pass
STAT 3
Pass
2.986392 GB/s
20.92834 ps
35.094303 ps
0 points
Pass
STAT 4
Pass
2.986518 GB/s
20.362092 ps
30.267444 ps
0 points
Pass
Data Rate
Status
Worst Non Transition Signal Eye :
24
Worst Transition Signal Eye :
Signal Data :
25
8.7
Tektronix PCI-E Test
Measurement
Overall
Median to Peak
Peak to Peak
Eye
Name
Result
Jitter
Jitter
Violations
PCI-E
Pass
2.493804 GB/s
35.108089 ps
51.286878 ps
0 points
Pass
PCI-E 4X
Pass
2.49386 GB/s
47.5224 ps
65.766645 ps
0 points
Pass
PCI-E 16X
Pass
2.491229 GB/s
44.322366 ps
59.526589 ps
0 points
Pass
Data Rate
Status
Worst Non Transition Signal Eye :
Worst Transition Signal Eye :
26
Signal Data :
27
8.8
NuStreams IPC NIC Test
8.8.1
Data Integrity Test Setting
Port Numbe r
(0, 3, 1)
NIC Vendor
eth0: (Mavell 88E8053-NNC1)
Test Media Type
1000FULL
Test Loop
3 loop
Frame Count Per Loop
3
Frame Length
1514 byte
Frame Gap
9600 bit time
8.8.1.1
Data Integrity Test Result
Port Numbe r
(0, 3, 1)
Port Number
(0, 3, 1)
MAC Address
00-00-5A-00-00-2E
Total Frame Count
9
DI Error Count
0
28
8.8.2
Transmit Performance Test Setting
LAN1 (0, 3, 1)
Port Numbe r
LAN2 (0, 5, 1)
Port Number
(0, 3, 1)
(0, 5, 1)
NIC Vendor
Test Media Type
1000FULL
1000FULL
Test time
43200 second
43200 second
Sample Time
5 second
5 second
Frame Length
1514 byte
1514 byte
8.8.2.1
Transmit Performance Separate Test Result
LAN1 (0, 3, 1)
Port Numbe r
LAN2 (0, 5, 1)
Port Number
(0, 3, 1)
(0, 5, 1)
MAC Address
00-00-5A-00-00-2E
00-00-5A-00-00-2B
Maximum Value
984.47 Mbps
984.48 Mbps
Minimum Value
910 Mbps
879.95 Mbps
Average Value
984.46 Mbps
984.44 Mbps
Standard Deviation
0.87 Mbps
1.12 Mbps
CRC Error Packet
0
0
Alignment Error Packet
0
0
Dribble Error Packet
0
0
29
8.8.3
Receive Performance Test Setting
LAN1 (0, 3, 1)
Port Numbe r
LAN2 (0, 5, 1)
NIC Vendor
Test Media Type
1000FULL
1000FULL
Test Loop
30
30
Sample Time
5 second
5 second
Frame Length
1514 byte
1514 byte
Frame Gap
96 bit time
96 bit time
8.8.3.1
Receive Performance Separate Test Result
LAN1 (0, 3, 1)
Port Numbe r
LAN2 (0, 5, 1)
MAC Address
00-00-5A-00-00-2E
00-00-5A-00-00-2B
Maximum Value
984.39 Mbps
984.39 Mbps
Minimum Value
984.39 Mbps
984.39 Mbps
Average Value
984.39 Mbps
984.39 Mbps
Standard Deviation
0 Mbps
0 Mbps
30
8.8.4
Round Trip Time Test Setting
LAN1 (0, 3, 1)
Port Numbe r
LAN2 (0, 5, 1)
NIC Vendor
Test Media Type
1000FULL
1000FULL
Test Loop
5
5
Frame Length
1514 byte
1514 byte
8.8.4.1
Round Trip Time Test Result
LAN1 (0, 3, 1)
Port Numbe r
LAN2 (0, 5, 1)
MAC Address
00-00-5A-00-00-2E
00-00-5A-00-00-2B
Maximum Value
0.16 ms
0.15 ms
Minimum Value
0.13 ms
0.12ms
Average Value
0.15 ms
0.13 ms
Standard Deviation
0.01 ms
0 ms
8.8.5
Media Type Test Setting
LAN1 (0, 3, 1)
LAN2 (0, 5, 1)
NIC Vendor
Media Type Test Flow
100FULL 1000FULL 100HALF 10FULL 10HALF 100FULL 1000FULL 100HALF 10FULL 10HALF
Test Loop
1
Port Numbe r
8.8.5.1
1
Media Type Test Result
LAN1 (0, 3, 1)
Port Numbe r
LAN2 (0, 5, 1)
MAC Address
00-00-5A-00-00-2E
00-00-5A-00-00-2B
Total Change Times
5
5
Correct Times
5
5
Wrong Times
0
0
31
9.0 Environmental Tests
Operate the equipment at an ambient temperature of 25℃ and RH level 50% for a minimum
period of 1 hrs.
Decrease the chamber’s temperature at a rate of 30℃/hr to -20℃. RH is not controlled.
Maintain a temperature -20℃, any RH for 16 hrs.
Increase the chamber’s temperature at a rate of 30℃/hr to 60℃. Increase the RH to attain a 50%
level by the time the target temperature is attained.
Maintain a temperature 60℃ and RH of 50% for 16hrs.
The system must running cannot hang or crash. The application must run 12H in chamber normal.
Cold Boot test: (1) power off the system and waiting 1H. Verify it can into the OS normal when
system power on. Test 10 times at 60℃ and -20℃. (2) Power on /off 1000 times at 60℃ and -20
℃(base on DOS).
Warm Boot test: (1) power off the system and waiting 1H. Verify it can into the OS normal when
system to reset. Test 10 times at 60℃ and -20℃. (2) Power reset 100 times at 60℃ and -20℃(use
ccwinstone 2001 to set system reset).
System Configuration ：
BIOS： PCIE-9450 V1.0 11/16/05
CPU: Intel Pentium 4 2.8 GHz FSB 800 MHz (Dual code)
Memory： Apacer DDR2 UNB PC4300 CL4 512MB*4
VGA Card： On Board Intel 82945G / Display Reso lution : 1024x768, 32 bit Co lor
HDD： HITACHI HDS722512 VL AT20 123.5 GB
O.S.： Windows XP professional version 2002 service pack 2
Power： AcBel ATX-400C-A2ADB 400W
9.1
Temperature Factor
Te mp.
Prog ra m
Time
Status
60℃
HCT System Stree
16 Hours
Pass
-20℃
HCT System Stree
16 Hours
Pass
32
9.2
Cold Boot
Ite m
Te mp.
P/S Off
1
-20℃
1 Hour
2
-20℃
3
60℃
4
60℃
9.3
Re ma rks
Pass
1000 Times
1 Hour
Pass
Pass
1000 Times
Pass
On/Off
Re ma rks
Warm Boot
Ite m
Te mp.
P/S Off
1
-20℃
1 Hour
2
-20℃
3
60℃
4
60℃
9.4
On/Off
Pass
100 Times
1 Hour
Pass
Pass
100 Times
Pass
Power On/Off Test
Te st Time s
Pass Time s
Fa il T ime s
Re ma rk
1500
1500
0
ATX
33
10.0
Appendix A
10.1 Boot sequence:
Prior to loading any Applications, go to the BIOS and verify the Boot Sequence so that the EUT
will boot off the Floppy Drive first. If not make the appropriate change.
Note: Prior to performing this task, insure that the drivers needed for the various components
within the EUT (CD-ROM, LS120, ZIP, etc.), are available on a floppy disk or CD-ROM for
downloading.
10.1.1
Loading the CD-ROM Driver:
Boot the system and install the CD-ROM driver by inserting the drive diskette into the floppy drive
and running “setup”.
Example: x:\setup, where “x” is the floppy drive designator.
Note:
You will have to use the appropriate driver for the CD-ROM drive used by the EUT.
If the EUT does not have a CD-ROM, a portable, external CD-ROM unit (such as Backpack®) may
be used. Load the software for the external CD-ROM as described above.
10.1.2
Printer setup:
Some software does not allow saving the test results. They must be sent to a local printer, network
printer or print to file. This section will explain the print to file method. On your Windows OS add
a new printer device. When prompted choose print to file. If you can use a generic printer for this
use it. If you select a specific type of printer you will only be able send that .PRN file to that
specific printer type later. Note: There are also some 3rd party drivers available that can be loaded
to print to HTML format etc…
34
11.0
Appendix B: Driver loading inf ormation, notes, issues etc…
VGA driver: Intel version: 6.14.10.4363 date: 2005.7.26
Audio driver: Reltek version: 5.10.0.5152
Lan driver: Marvell Yukon version: 7.21.1.3 date: 2004.8.19
Chipset patch: Intel version: 7.2.1.1003 date: 2005.6.23
35
12.0
Test Revision History
Each time the test is updated or changed, the revision level must be incremented. This section
should include a description of the change(s) made to the plan. Revisions should be listed in
descending order.
Revision:
Date
By:
Section(s):
36

Test Report

Transcription

Similar documents

PCIE-9450