smartkey® re-key technology

SMARTKEY® RE-KEY
TECHNOLOGY
THE LOCK YOU CAN
RE-KE Y IN SECONDS
Now you can re-key your locks,
quickly & securely, without the
extra hassle & cost of removing
the lock from the door.
ƒƒ Increase jobsite security
ƒƒ Control jobsite keys
ƒƒ Reduce callbacks / simple on site re-keying
ƒƒ Homeowner peace of mind
You must have your functioning key &
the learn tool for the system to work.
!
Functioning Key
1
SmartKey Learn Tool
Insert functioning key & turn
1/4 turn clockwise.
New Key
2
!
Functioning Key
SmartKey Learn Tool
3
Insert & remove the SmartKey learn
tool. Remove functioning key.
Insert new key & turn 1/2 turn
counter-clockwise. Done.
Your lock is now re-keyed!
You must have your functioning key &
the learn tool for the system to work.
New Key
THE BEST SECURITY IS SMART SECURITY.
Unscrew the back of the
deadbolt & remove the cylinder
Remove the C-clip that holds
18989-KW
Remove the cylinder plug
!
You must have your functioning key &
the learn tool for the system to work.
You must have your functioning key &
the learn tool for the system to work.
!
You must have your functioning key &
the learn tool for the system to work.
!
Functioning Key
SmartKey Learn Tool
New Key
Functioning Key
SmartKey Learn Tool
New Key
Functioning Key
SmartKey Learn Tool
New Key
BumpGuard™
SmartKey’s patented side locking bar
replaces the traditional pin1technology
2
and-tumbler design and provides improved
1security against lock bumping. 2
1
2
Insert functioning key & turn
1/4 turn clockwise.
Insert & remove the SmartKey learn
tool. Remove functioning key.
Insert functioning key & turn
1/4 turn clockwise.
Insert & remove the SmartKey learn
tool. Remove functioning key.
BumpGuard™
Insert functioning key & turn
1/4 turn clockwise.
Insert & remove the SmartKey learn
tool. Remove functioning key.
3
3
3
Insert new key & turn 1/2 turn
counter-clockwise. Done.
Your lock is now re-keyed!
Insert new key & turn 1/2 turn
counter-clockwise. Done.
Your lock is now re-keyed!
Insert new key & turn 1/2 turn
counter-clockwise. Done.
Your lock is now re-keyed!
How to Use the Reset Cradle
1
1
1
Unscrew the back of the
deadbolt & remove the cylinder
from the deadbolt casing.
Unscrew the back of the
deadbolt & remove the cylinder
from the deadbolt casing.
Unscrew the back of the
deadbolt & remove the cylinder
from the deadbolt casing.
4
4
4
Hold the bottom firmly &
rotate the top section
clockwise. The arrow should
Hold the
bottom
firmly &
point
to the
lock icon.
rotate the top section
clockwise. The arrow should
point
to the
lock icon.
Hold the
bottom
firmly &
rotate the top section
clockwise. The arrow should
point to the lock icon.
7
7
7
Insert the SmartKey tool &
push with force until it clicks.
Remove the SmartKey tool.
Insert the SmartKey tool &
push with force until it clicks.
Remove the SmartKey tool.
Insert the SmartKey tool &
push with force until it clicks.
Remove the SmartKey tool.
2
2
2
5
5
5
Remove the C-clip that holds
the cylinder plug.
Remove the C-clip that holds
the cylinder plug.
Remove the C-clip that holds
the cylinder plug.
Insert the cyinder all the way
into the inner dial.
Insert the cyinder all the way
into the inner dial.
Insert the cyinder all the way
into the inner dial.
8
8
8
THE BEST
3
3
3
6
6
6
Insert the new key, while being
sure not to rotate the plug.
Remove the plug by gently
Insert
pullingthe
thenew
key.key, while being
sure not to rotate the plug.
Remove the plug by gently
pulling
thenew
key.key, while being
Insert the
sure not to rotate the plug.
Remove the plug by gently
pulling the key.IS SMART SECURITY.
SECURITY
9
9
9
Remove the cylinder plug
from the housing unit.
Remove the cylinder plug
from the housing unit.
Remove the cylinder plug
from the housing unit.
Rotate the top section counterclockwise until it stops. The arrow
should meet with the top arrow.
Rotate the top section counterclockwise until it stops. The arrow
should meet with the top arrow.
Rotate the top section counterclockwise until it stops. The arrow
should meet with the top arrow.
Hold the cylinder body & rotate
the key 90˚ clockwise. Remove
the key.
Hold the cylinder body & rotate
the key 90˚ clockwise. Remove
the key.
Hold the cylinder body & rotate
the key 90˚ clockwise. Remove
the key.
18989-KW