Rollease Component Measurements

Transcription

Rollease Component Measurements
R-Series
R-Series Component Overview
Spring
Assist
Clutch
Bracket
Bracket Projection
Heavy
Duty
Brackets
R-24
LE
FT
11/2 inch
Bracket Cover
(use with R8
bracket only)
2
2 inch
7/8
inch
R-16
R-8
1.5 to 2 inch
adapters
R-3
Link System
Bracket
End Plug
Bracket
End Plug
External Hem Bar
Pin End Spring Assist
Bracket Cover
(use with R8 bracket only)
Internal Hem Bar
www.AVOutlet.com
MAX
WEIGHT
(1,4 kg)
R3
8 lbs
(3,6kg)
R8
8 lbs (3,6kg)
16 lbs (7,3kg)
1” (25mm)
1” (adjustable)(25mm)
1 1/8” (28mm)
60”
60”
84”
1” (25mm)
1 1/8” (28mm)
1 1/4” (32mm)
1 1/2” * (38mm)
60” (152cm)
84” (213cm)
114” (289cm)
132” (335cm)
R16
R24
SA
24 lbs
18 lbs
30 lbs
(11,0 kg)
(8,2 kg)
(13,5 kg)
(152cm)
(152cm)
(213cm)
CLUTCH
PART NO.
TUBE
PART NO.
END PLUG
PART NO.
R3C02
R3CABC
R3C01
RTEA1T12
RTEA1T12
RTEA2T12
REP02
REPABC
REP01
R8C02
R8C01
R8C03
R8C14
RTEA1T12
RTEA2T12
RTEA3T12
RTEA4T12
REP02
REP01
REP03
REP53
* lightweight
materials only,
5 lb. (2,25kg )
maximum
1
1
1/4” (32mm)
1/2” (38mm)
BRACKETS
1 1/2” (38mm)
PROJECTION
PART NO.
2” (50mm)
PROJECTION
PART NO.
2.25” (57mm)
PROJECTION
PART NO.
2 7/8” (57mm)
PROJECTION
PART NO.
RB360
RB380
n/a
RB390
RB360
RB380
n/a
RB390
RB360
RB380
n/a
RB390
Bracket Covers: (optional for 360/380)
RBPC360 RBPC380
n/a
n/a
RB360
RB380
n/a
n/a
RB360
RB380
n/a
n/a
RB360
RB380
n/a
n/a
RB360
RB380
n/a
n/a
Bracket Covers: (optional)
RBPC360(W/BK) RBPC380(W/BK)
3 inch (75mm) Fascia Panel (RFP3) for
R8 requires RB361 OR RB362 Brackets. (see note below)
114” (289cm)
132” (335cm)
R3 or R8
R16
RTEA3T12
RTEA4T12
SAPE03
SAPE53
RB360
RB560
RB380
RB580
n/a
n/a
RB390
RB590
R16C53
R16C53
RTEA4T12
RTEA5U14
REP53
REP53
RB560
RB560
RB580
RB580
RBGAL
RBGAL
RB590
RB590
+(1) RA2
Adapter
+(1) RA2
Adapter
R24C53
R24C53
RTEA4T12
RTEA5U14
Max Drop
(1-1/4: 88” 2,23m)
(1-1/2: 96” 2,44m)
PESA
16 lbs (7,3kg)
12 lbs (5,4 kg)
MAX
SHADE
WIDTH*
1 1/2” (38mm)
2” *(50mm)
132”(335cm)
168”(427cm)
*Must use 2” (50mm)
Adapters (RA2),
2 per shade
1 1/2” (38mm)
2” *(50mm)
132”
168”
(335cm)
(427cm)
+(1) RA2
Adapter
*Must use 2” (50mm)
Adapters (RA2),
2 per shade
1 1/2” (38mm)
2” *(50mm)
*Must use 2” (50mm)
Adapters (RA2),
2 per shade
Use
Spring
Assist
Software
SA24(R/L)(36/45)
SA24(R/L)(36/45)
+(1) RA2
Adapter
3 inch (75mm)Fascia Panel (RFP3) for
R16 requires RB561 Brackets.
REP53
REP53
+(1) RA2
Adapter
RTEA4T12
RTEA5U14
REP53
REP53
NA
NA
RB580
RB580
RBGAL
RBGAL
RB590
RB590
4 inch (100mm)Fascia Panel (RFP4) for
R24 requires RB581 Brackets.
NA
NA
RB580
RB580
RBGAL
RBGAL
n/a
n/a
+(1) RA2
Adapter
* Note: Maximum shade widths are given for light fabric and/or short shade drops. For more detail, consult the chart that specifies clutch and tube sizes.
Note: R-3 & R-8: RB-361 fascia brackets (with blade centered) will accomodate a 2 inch (50mm) outside dimension roll of fabric, RB-362 fascia bracket with blade
offset from center will accomodate a 2-3/4 inch outside dimension roll of fabric.
CLUTCHES In figuring weight, include only the shade cloth, hem bar and trim. Do not include the weight of the tube, clutch or other RollEase components.
TECHNICAL
3 lbs
TUBE
R-Series
R-Series Hardware Measurements
.38
.19
Diameter
.62
.07
1.94
H
.45
BRACKET
MODEL
A
B
C
D
E
F
G
H
END PLUG
R3
360
380
2.24
2.74
1.5
2.0
1.06
1.06
1.5
1.5
0.28
0.28
1.82
1.82
1.48
1.48
2.19
2.70
R8
360
380
2.48
2.98
1.5
2.0
1.06
1.06
1.5
1.5
0.28
0.28
2.35
2.35
1.95
1.95
2.19
2.70
R16
560
580
RBGAL
2.95
3.45
3.56
1.62
2.12
2.25
2.0
2.0
1.75
2.5
2.5
3.0
0.31
0.30
0.60
3.21
3.21
3.21
2.65
2.65
2.65
N/A
N/A
N/A
580
RBGAL
3.91
3.56
2.12
2.25
2.0
1.75
2.5
3.0
0.31
0.60
4.29
3.21
3.58
2.65
N/A
N/A
R24 &
SA24
www.AVOutlet.com
All dimensions in inches, see decimal/fraction/metric
conversion chart in this section
END PLUG
BRACKET WITH
RETAINER
.47
Flange diameter matches
outside diameter of tube
Link System
Projection matches
RB-380 and RB580 brackets
2 inches
50mm
Light Gap
Light Gap: on 1-1/2” (38mm) tube is 0.64 inch,
with 2 inch (50mm) tube adapters 0.81 inch
See fabrication page for specifics on calculating specific
clutch and pin end system light gap deductions
RollEase, Inc. 200 Harvard Avenue Stamford, CT 06902-6320
800.552.5100 203.964.1573 Fax: 203.964.0513 www.rollease.com
Order Fax: 203.358.5865 © 2009 RollEase, Inc. Rev: May 5, 2009
TECHNICAL
CLUTCH
MODEL
BRACKET COVER
CEILING MOUNT
WALL or INSIDE MOUNT
R-Series
R-Series Hardware Measurements
C-80/Raceway
Intermediate Bracket
Raceway
Mounting Brackets
C-120 Universal
Bracket
C-120 Intermediate
Bracket
C-120 Mounting
Brackets
C-80 Mounting
Brackets
End
Plug Ca
Ra
cew
ay
sse
tte
80
Ca
sse
tte
C-80/Raceway
Universal
Bracket
C-80/Raceway
Universal Bracket
12
0
Universal
Bracket
Raceway Universal
End Cap
C-80 Universal End Cap
C-120 Universal End Cap
CASSETTE 80, RACEWAY
COMPONENT DIMENSIONS
CASSETTE 80
END CAP
2.60
2.32
2.36
RACEWAY HEADRAIL
2.43
1.61
1.13
1.52
MOUNTING BRACKETS
1.39
0.52
1.61
RACEWAY END CAP
1.0
2.13
CASSETTE 80
RACEWAY
2.79
All dimensions in inches, see decimal/fraction/metric
conversion chart in this section
0.13
INTERNAL UNIVERSAL BRACKETS
PROJECTIONS
R3/R8
CRUBKT: 1.115 inches
CRIMBKT: 1.115 inches
www.AVOutlet.com
CASSETTE 120
COMPONENT DIMENSIONS
MOUNTING BRACKETS
3.8
2.0
4.05
2.13
1.52
3.68
3.68
1.94
INTERNAL UNIVERSAL
BRACKETS PROJECTION
R16/G200
CRUBKT53L: 1.672 inches
CRIMBKT53L: 1.672 inches
R3/R8
CRUBKT53: 1.274 inches
CRUBKT53L8: 1.672 inches
RollEase, Inc. 200 Harvard Avenue Stamford, CT 06902-6320
800.552.5100 203.964.1573 Fax: 203.964.0513 www.rollease.com
Order Fax: 203.358.5865 © 2009 RollEase, Inc. Rev: May 5, 2009
TECHNICAL
CASSETTE 80
HEADRAIL
R-Series
R-Series Hardware Measurements
FASCIA SYSTEM
Clutch Fascia Bracket
Clutch & End Plugs
(See Lift Systems)
Peel & Stck
Fascia End Caps
Fascia Panel
End Plug
Fascia Bracket
Rounded
Fascia Panel
Universal End Cap for
Rounded Fascia
www.AVOutlet.com
FASCIA
BRACKET
.19 DIAMETER
P
N
FASCIA
PROFILE
.45
.54
K
L
M
.72
P
CLUTCH BRACKET FASCIA
MODEL MODEL HEIGHT
J
J
K
L
M
N
P
R8
361/362
3 IN
3.06
2.28
3.31
2.08
1.93
3.00
R16
561
3 IN
3.06
2.28
3.35
2.08
1.93
3.00
R24
581
4 IN
4.06
2.78
4.50
3.08
2.93
4.00
361 - 362 Fascia Brackets:
RollEase, Inc. 200 Harvard Avenue Stamford, CT 06902-6320
800.552.5100 203.964.1573 Fax: 203.964.0513 www.rollease.com
Order Fax: 203.358.5865 © 2009 RollEase, Inc. Rev: May 5, 2009
TECHNICAL
All dimensions in inches, see
decimal/fraction/metric
conversion chart in this section
R-Series
R-Series Hardware Measurements
ALUMINUM TUBE
TAPED
11/8 inch
1inch
(28mm)
(25mm)
TAPED
0.961
0.95
2inch
1
1/2 inch
1
1/4 inch
(38mm)
(32mm)
TAPED
TAPED
1.190
(50mm)
TAPED or UNTAPED
ALUMINUM TUBE
1.419
1.875
1.061
1.05
1.29
1.52
2.0
21/2 inch
(63mm)
TAPED or UNTAPED
ALUMINUM TUBE
2.43 m)
7m
6
( 1,
2.57 m)
3m
(65,
ALUMINUM TUBE FOR MOTORIZATION
www.AVOutlet.com
2inch
TAPED or UNTAPED
ALUMINUM TUBE
1.875
2.0
21/2 inch
31/4 inch
(63mm)
TECHNICAL
(50mm)
Smooth Wall Motorization Tube
for Somfy
ST-50, LT-50 motors or similar.
(83mm)
Motorized use only
TAPED or UNTAPED
ALUMINUM TUBE
TAPED or UNTAPED
ALUMINUM TUBE
2.43 m)
7m
6
( 1,
2.57 m)
3m
(65,
all s
W nes
ick 0
Th 0.12
RollEase, Inc. 200 Harvard Avenue Stamford, CT 06902-6320
800.552.5100 203.964.1573 Fax: 203.964.0513 www.rollease.com
Order Fax: 203.358.5865 © 2009 RollEase, Inc. Rev: May 5, 2009
R-Series
R-Series Hardware Measurements
www.AVOutlet.com
BEAD CHAIN
It is very important that the #10 metal bead chain used with RollEase clutches meets the following
specifications.
QUALIFIED #10 metal bead chain, 50-51 beads per foot, with a bead diameter of 3/16” (.1875”)
(“Qualified” means that the chain must have uniform bead spacing) Plastic or metal chain break strength to
be 40 lb minimum, stainless steel 85 lbs minimum
Some #10 metal chain that is sold within the window covering industry is unqualified, and the spacing may
vary between 47 and 52 beads per foot. This chain will not work properly in RollEase clutches. The problems
encountered may include noisy operation, excessive wear, and higher than normal pull force. Please be sure
you have the correct bead chain!
RollEase, Inc. offers qualified #10 chain in metal and plastic as long length spools or as pre-made continuous
loops.
D-30 CONTROL CORD
To be used with R3 & R-8 clutches. Stock cords are 2ʼ, 3ʼ, 4ʼ, 5ʼ, 6ʼ (0.6m, 0.9m, 1.2m , 1.5m and 1.8m) in
white and vanilla. Non-stock sizes are available in white and vanilla and in many other shades of pink, beige,
blue, grey and green. Inquire for delivery times and complete part numbers.
TENSION DEVICE
Fabricators must ship a Tension Device attached to every finished shade. RollEase offers two patent-pending
tension devices for cord loops or bead chain loops that comply with the WCMA-ANSI standard 6.5 requiring a
tension device to make the shade partially inoperative unless the tension device is properly installed.
TECHNICAL
One tension device is designed for continuous cord or bead loops and another for bead chain which allows a
stop ball and/or connectors to pass through. RollEaseʼs tension device is available in White, Black, and Vanilla.
RollEase, Inc. 200 Harvard Avenue Stamford, CT 06902-6320
800.552.5100 203.964.1573 Fax: 203.964.0513 www.rollease.com
Order Fax: 203.358.5865 © 2009 RollEase, Inc. Rev: May 5, 2009
R-Series
Galaxy Feature (for R-Series) Overview
Heavy Duty Bracket
(clutch side)
Fascia,
Clutch
Bracket
G-300 Galaxy Spring Assist
Clutch
Bracket
LE
FT
G-400 Galaxy with
2.5 inch adapter
11/2 Inch (38mm) Keyed Tube or
2 Inch (50mm) Keyed Tube
2.5 inch (64mm) Keyed Tube
2 Inch
Tube
Adapter
G-100/G-200
Galaxy™ Clutch
End Plug
Bracket
4” Square
Fascia
Heavy Duty Bracket
(end plug side)
End Plug
Fascia, End Plug Bracket
Internal Hem Bar
Rounded External Hem Bar
MAX
SHADE
WIDTH*
CLUTCH
PART NO.
(38mm)
(50mm)
*Must use 2” (50mm)
Adapters (RA2),
2 per shade
132” (335cm)
168” (427cm)
RGAL(W/BK)WH
RGAL(W/BK)WH
RTEA4T12
RTEA5U14
REP53(W/BK)
REP53(W/BK
RB560
RB560
RB580
RB580
RBGAL
RBGAL
RB581
RB581
1 1/2”
2”
132” (335cm) RGALSA(36/45)(R/L)(W/BK)-6 RTEA4T12
168” (427cm) RGALSA(36/45)(R/L)(W/BK)-6 RTEA5U14
REP53(W/BK)
REP53(W/BK)
n/a
n/a
n/a
n/a
RBGAL
RBGAL
RB581
RB581
+(1) RA2 Adapter
+(1) RA2 Adapter
RBGAL
RBGAL
RB581
RB581
RBGAL
RB581
MAX
WEIGHT
G200
24 lbs
20 lbs
(10,8 kg)
(9,0 kg)
www.AVOutlet.com
TUBE
1 1/2”
2” *
TUBE
PART NO.
END PLUG
PART NO.
BRACKETS
1 1/2” (38mm)
PROJECTION
PART NO.
2” (50mm)
PROJECTION
PART NO.
2.25” (57MM)
PROJ. HEAVY
DUTY
BRACKETS
4” FASCIA
(102MM)
BRACKETS
30 lbs
30 lbs
(13,5 kg)
(13,5 kg)
(38mm)
(50mm)
*Must use 2” (50mm)
Adapters (RA2),
2 per shade
G400
53 lbs
40 lbs
(23,9 kg)
(18 kg)
1 1/2”
2”*
32 lbs
(14,4 kg)
2
(38mm)
(50mm)
132” (335cm)
168” (427cm)
RGAL400(W/BK)
RGAL400(W/BK)
1/2”** (64mm)
168” (427cm)
RGAL400(W/BK)
RTEA4T12
RTEA5U14
REP53(W/BK)
REP53(W/BK)
RTEA6U14
REP53(W/BK)
+(1) RA2 Adapter
+(1) RGAL400A25
Adapter
No RB-560 because of bracket
of
n/aweight limitation
RB580
kg)
n/a24 lbs (10,9RB580
+(1) RA2 Adapter
n/a
RB580
+(1) RGAL400A25
Adapter
(* 2.0 Inch (50mm) tube: Must use 2” (50mm) Adapters (RA2), 2 per shade) (**2.5 inch tube: Must use 2.5” (63mm) Adapters; (Natural: RGAL400A25, Black: RGAL400ABK), 2 per shade)
Note: G-400 is recommended with 2.5 inch (63mm) tube because of bead-chain run-through lengths. Maximum shade widths are given for light fabric and/or short shade drops. For more detail, consult the chart that
specifies clutch and tube sizes.
TECHNICAL
G300
R-Series
Galaxy Component Dimensions
.38
.62
(9,7mm)
(15,7mm)
.38
.07
(9,7mm)
(1,3mm)
1.5
(38mm)
.125
(3,2mm)
.19
(4,8mm)
Diameter
560/580 BRACKET CEILING MOUNT
560/580 BRACKET
WALL or INSIDE MOUNT
RBGAL BRACKET
WALL or INSIDE MOUNT
Dimensions in inches/mm
www.AVOutlet.com
INCHES
CLUTCH
MODEL
BRACKET
MODEL
A
B
C
D
E
F
G
G-100
and
G-200
560
580
RBGAL
580
RBGAL
2.95
3.45
3.56
3.91
3.56
1.62
2.12
2.25
2.12
2.25
2.0
2.0
1.75
2.0
1.75
2.5
2.5
3.0
2.5
3.0
0.31
0.31
0.60
0.31
0.60
3.21
3.21
3.21
4.29
3.21
2.65
2.65
2.65
3.58
2.65
G-400
G-400
RBGAL BRACKET
CEILING MOUNT
Flange diameter matches
.47
outside diam(11,9mm)
eter of tube
END PLUG
BRACKET WITH
RETAINER
END PLUG
MILLIMETERS
BRACKET
MODEL
A
B
C
D
E
F
G
G-100
and
G-200
560
580
RBGAL
580
RBGAL
75
88
90
41
53,8
57
50
50
44
63
63
76
99
90
54
57
50
44
63
76
8
8
15
18
15
82
82
82
100
82
67
67
67
91
67
G-400
G-400
TECHNICAL
CLUTCH
MODEL
RollEase, Inc. 200 Harvard Avenue Stamford, CT 06902-6320
800.552.5100 203.964.1573 Fax: 203.964.0513 www.rollease.com
Order Fax: 203.358.5865 © 2009 RollEase, Inc. Rev: May 5, 2009
R-Series
G-300 Configuration
Galaxy - Fascia System Dimension
FASCIA
BRACKET
.19 (4,8mm)
DIAMETER
FASCIA
PROFILE
.45
P
N
(11,4mm)
EXPLODED VIEW
G-300 CONFIGURATION
.54
K
.72
L
M
(18,2mm)
P
J
G-400 Configuration
G-300 Configuration
FASCIA
BRACKET
.19 (4,8mm)
DIAMETER
0.52
FASCIA
PROFILE
.45
P
N
(11,4mm)
(13,7mm)
K
L
M
.72
P
J
(18,2mm)
G-400 Configuration
www.AVOutlet.com
INCHES
CLUTCH BRACKET FASCIA
MODEL MODEL HEIGHT
J
K
L
M
N
P
G-300
581
4 IN
4.06
2.78
n/a
3.08
2.93
4.00
G-400
581
4 IN
4.06
2.78
4.50
3.08
2.93
4.00
CLUTCH BRACKET FASCIA
MODEL MODEL HEIGHT
J
K
L
M
N
P
G-300
581
102
103
71
n/a
78
74
102
G-400
581
103
103
71
114
78
74
102
MILLIMETERS
TUBE
(50mm)
11/2 inch
(38mm)
TAPED
TAPED or UNTAPED
ALUMINUM TUBE
1.419
1.875
1.52
2.0
21/2 inch
(63mm)
TAPED or UNTAPED
ALUMINUM TUBE
2.43 m)
7m
(61,
2.57 m)
3m
(65,
Tube Tolerance Note: RollEase tube complies with Aluminum Industry Specification tube bow tolerances. This
specification corresponds to the length of the tube, and is 0.010" (0.25mm) x Measured Length, Ft. Example: A tube
measuring 12 ft. (4,7m) has a maximum deflection (D) of 0.12 inch (3mm) (0.010” x 12ʼ)
RollEase, Inc. 200 Harvard Avenue Stamford, CT 06902-6320
800.552.5100 203.964.1573 Fax: 203.964.0513 www.rollease.com
Order Fax: 203.358.5865 © 2009 RollEase, Inc. Rev: May 5, 2009
TECHNICAL
2inch