LIFTING EQUIPMENT CONTENTS
Transcription
LIFTING EQUIPMENT CONTENTS
LIFTING EQUIPMENT CONTENTS JACKING BEAMS ...................................................................................................................................................................................................................................................................................... 4 PIT JACKS ................................................................................................................................................................................................................................................................................................... 8 JACKING BEAMS & PIT JACKS ACCESSORIES................................................................................................................................................................................................................................ 12 AXLE STANDS ......................................................................................................................................................................................................................................................................................... 14 AIR HYDRAULIC JACKS & ACCESSORIES........................................................................................................................................................................................................................................ 16 AIRCRAFT JACKS ................................................................................................................................................................................................................................................................................... 20 HYDRAULIC JACKS & ACCESSORIES................................................................................................................................................................................................................................................ 22 WHEEL TROLLEYS ................................................................................................................................................................................................................................................................................. 26 CRANES .................................................................................................................................................................................................................................................................................................... 28 TRANSMISSION JACKS & ACCESSORIES........................................................................................................................................................................................................................................ 30 LIFTING EQUIPMENT ACCESSORIES ............................................................................................................................................................................................................................................... 32 For more information visit: www.GarageEquipment.com.au or call 1800 777 318 JACKING BEAMS JACKING BEAMS 4 : JACKING BEAMS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 SD20L / SD26L SD20PHL / SD26PHL Hand hydraulic jacking beam for passenger cars and vans Air hydraulic jacking beam for passenger cars and vans • Quick and efficient lifting due to manual double acting pump • Low closed height of only 180 mm makes it suitable for vehicles with a low clearance • Flexible top support beam can be extended up to 1610 mm • Unique height adjustable support arm system – designed to fit all current lifts and pits • Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for optimum safety • Supplied with 3 extension sets (10/40/85 mm) and rubber cushion for protection of car body Technical Data • Quick and efficient lifting due to reliable and noiseless pump • Low closed height of only 180 mm makes it suitable for vehicles with a low clearance • Flexible top support beam can be extended up to 1610 mm • Unique height adjustable support arm system – designed to fit all current lifts and pits • Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for optimum safety • Supplied with 3 extension sets (10/40/85 mm) and rubber cushion for protection of car body Technical Data Description SD20L SD26L Description SD20PHL SD26PHL Capacity: Stroke: Min. height: Telescopic arms: Width (÷ support arms): Lifting frame (height): Lifting frame (depth): Air supply: Air consumption: Weight (÷ support arms): 2000 kg 250 mm 180 mm 780 - 1610 mm 780 - 1180 mm 120 mm 249 mm 2600 kg 250 mm 180 mm 780 - 1610 mm 780 - 1180 mm 120 mm 249 mm 105 kg 105 kg Capacity: Stroke: Min. height: Telescopic arms: Width (÷ support arms): Lifting frame (height): Lifting frame (depth): Air supply: Air consumption: Weight (÷ support arms): 2000 kg 250 mm 180 mm 780 - 1610 mm 780 - 1180 mm 120 mm 249 mm 8,5 - 12 bar 350 l/min 110 kg 2600 kg 250 mm 180 mm 780 - 1610 mm 780 - 1180 mm 120 mm 249 mm 8,5 - 12 bar 350 l/min 110 kg LIFTING EQUIPMENT CATALOGUE 5 JACKING BEAMS SD20PHL-A / SD26PHL-A SD40PHL Automatic air hydraulic jacking beam for inspections centres and workshops with many lifting operations Air hydraulic jacking beam for passenger cars, vans and trucks • Individual joysticks control of lifting arms to avoid time consuming working operations • Remote control activates lowering and retraction of lifting arms to closed position • Placing the remote control next to the lift control panel ensures safe operation and prevents unnecessary steps • Unique height adjustable support arm system – designed to fit all current lifts and pits • Supplied with 3 extension sets (10/40/85 mm) and rubber cushion Technical Data • Strong and robust design makes it ideal for lifting heavy vehicles • Low closed height of only 230 mm • Flexible top support beam can be extended up to 1500 mm • Unique height adjustable support arm system – designed to fit all current lifts and pits • Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for optimum safety • Supplied with 2 extension sets (50/100 mm) Technical Data Description SD20PHL-A SD26PHL-A Description Dimension Capacity: Stroke: Min. height: Telescopic arms: Width (÷ support arms): Lifting frame (height): Lifting frame (depth): Air supply: Air consumption: Weight (÷ support arms): 2000 kg 250 mm 200 mm 780 - 1500 mm 780 - 1180 mm 120 mm 249 mm 8,5 - 12 bar 350 l/min 120 kg 2600 kg 250 mm 200 mm 780 - 1500 mm 780 - 1180 mm 120 mm 249 mm 8,5 - 12 bar 350 l/min 120 kg Capacity: Stroke: Min. height: Telescopic arms: Width (÷ support arms): Lifting frame (height): Lifting frame (depth): Air supply: Air consumption: Weight (÷ support arms): 4000 kg 250 mm 230 mm 780 - 1500 mm 780 - 1220 mm 160 mm 343 mm 8,5 - 12 bar 350 l/min 175 kg 6 : JACKING BEAMS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 FL - 1 RANGE FL - 2 RANGE Standard air hydraulic single ram jacking beam Air hydraulic twin ram jacking beam • Rapid and precise air hydraulic unit with high speed ram travel • Simple modern design with control panel at ergonomical working height • Can be made to fit all lifts due to its adjustable frame (590 - 890 mm or 850 - 1150 mm) • Frame height is adjusted and set to the customers individual specifications • Transversely sliding ram • Dead man’s release and safety overload valve for optimum safety • Supplied with 1 x 100 mm extension • 2 individually controlled rams offer safe and balanced lifting • Transversely sliding rams • Rapid and precise air hydraulic unit with high speed ram travel • Simple modern design with control panel at ergonomical working height • Can be made to fit all lifts due to its adjustable frame (590 - 890 mm or 850 - 1150 mm) • Frame height is adjusted and set to the customers individual specifications • Dead man’s release and safety overload valve for optimum safety • Supplied with 2 x 100mm extensions Technical Data Technical Data Description FL60 - 1 FL100-1 FL120 - 1 FL160 - 1 FL200 - 1 Capacity: Stroke: Min. height: Max. height: Width: Depth: Air supply: Air consumption: Weight: 6000 kg 200 mm 305 mm 505 mm 590 - 1150 mm 665 mm 8,5 - 12 bar 350 l/min 200 kg 10,000 kg 200 mm 380 mm 580 mm 590 - 1150 mm 665 mm 8,5 - 12 bar 350 l/min 200 kg 12,000 kg 200 mm 380 mm 580 mm 590 - 1150 mm 665 mm 8,5 - 12 bar 350 l/min 200 kg 16,000 kg 200 mm 380 mm 580 mm 590 - 1150 mm 665 mm 8,5 - 12 bar 350 l/min 200 kg 20,000 kg 200 mm 380 mm 580 mm 590 - 1150 mm 665 mm 8,5 - 12 bar 350 l/min 200 kg LIFTING EQUIPMENT CATALOGUE Description FL60 - 2 FL100 - 2 FL120 - 2 FL160 - 2 FL200 - 2 Capacity: Stroke: Min. height: Max. height: Width: Depth: Lifting Points (distance): Air supply: Air consumption: Weight: 6000 kg 200 mm 305 mm 505 mm 590 - 1150 mm 665 mm 200 - 898 mm 8 - 12 bar 350 l/min 202 kg 10,000 kg 200 mm 305 mm 505 mm 590 - 1150 mm 665 mm 200 - 898 mm 8 - 12 bar 350 l/min 202 kg 12,000 kg 200 mm 380 mm 505 mm 590 - 1150 mm 665 mm 200 - 898 mm 8 - 12 bar 350 l/min 202 kg 16,000 kg 200 mm 380 mm 505 mm 590 - 1150 mm 665 mm 200 - 898 mm 8 - 12 bar 350 l/min 202 kg 20,000 kg 200 mm 380 mm 505 mm 590 - 1150 mm 665 mm 200 - 898 mm 8 - 12 bar 350 l/min 202 kg 7 PIT JACKS PIT JACKS 8 : PIT JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 GD - 1 RANGE GD - 2 RANGE Standard air hydraulic single ram pit jack Air hydraulic twin ram pit jack • 2 individually controlled rams offer safe and balanced lifting • Rapid and precise air hydraulic unit with high speed ram travel • Simple modern design with control panel at ergonomical working height • Transversely sliding rams • Can be made to fit all pits due to its adjustable frame (590 - 890 mm or 850 - 1150 mm) • Frame height is adjusted and set to the customers individual specifications • Comprehensive option range: cross beam, support bridge etc. • Supplied with 2 x100 mm extensions • Rapid and precise air hydraulic unit with high speed ram travel • Simple modern design with control panel at ergonomical working height • Can be made to fit all pits due to its adjustable frame (590 - 890 or 850 - 1150 mm) • Frame height is adjusted and set to the customers individual specifications • Fitted with leaf spring support bearings for easy glide transversing ram • Comprehensive option range: cross beam, gearbox saddle, support bridge etc. Technical Data Technical Data Description GD100 - 1 GD150 - 1 GD200 - 1 Capacity: Stroke: Min. height: Max. height: Width: Depth: Air supply: Air consumption: Weight: 10,000 kg 800 mm 1020 mm 1820 mm 590 - 1150 mm 665 mm 8 - 12 bar 350 l/min 220 kg 15,000 kg 800 mm 1020 mm 1820 mm 590 - 1150 mm 665 mm 8 - 12 bar 350 l/min 220 kg 20,000 kg 800 mm 1020 mm 1820 mm 590 - 1150 mm LIFTING EQUIPMENT CATALOGUE 8 - 12 bar 350 l/min 220 kg Description GD100 - 2 GD150 - 2 GD200 - 2 Capacity: Stroke: Min. height: Max. height: Width: Depth: Lifting Points (distance): Air supply: Air consumption: Weight: 10,000 kg 420 mm 525 mm 945 mm 590 - 1150 mm 649 mm 200 - 898 mm 8 - 12 bar 350 l/min 220 kg 15,000 kg 420 mm 525 mm 945 mm 590 - 1150 mm 649 mm 200 - 898 mm 8 - 12 bar 350 l/min 220 kg 20,000 kg 420 mm 525 mm 945 mm 590 - 1150 mm 649 mm 200 - 898 mm 8 - 12 bar 350 l/min 220 kg 9 PIT JACKS GGD150F GGD150U Air hydraulic floor pit jack with telescopic cylinder Air hydraulic floor pit jack with traversing telescopic cylinder • Flexible pit jack for use both in pits and under vehicle lifts • Suitable for all traditional lifting jobs • Ideal for dismounting and re-mounting of gearboxes • Built-in manual foot pump for easy and precise adjustment • Rapid and precise air hydraulic unit with high speed ram travel • Spring loaded wheel support prevents unintended movements when lifting more than 800 kg • Dead man’s release and safety overload valve for optimum safety Technical Data • Flexible pit jack for use in pit or under a lift • Traversing cylinder ensures a wide reach under the vehicle and enables the mechanic to move freely back and forth in the pit • Ideal for dis- and remounting of gearboxes due to telescopic cylinder • Built-in manual foot pump for easy and precise adjustment • Rapid and precise air hydraulic unit with high speed ram travel up and down • Base frame wheels fitted with bearings for optimum manoeuvrability • Spring loaded wheel support prevents unintended movements when lifting more than 800 kg Technical Data Description Dimension Description Dimension Capacity: Stroke: Min. height: Max. height: Base width: Base depth: Cylinder diameter: Air supply: Air consumption: Weight: 15,000 kg 1285 mm 921 mm 2206 mm 844 mm 1004 mm Ø 60 mm 8,5 - 12 bar 350 l/min 220 kg Capacity: Stroke: Min. height: Max. height: Traversing cylinder: Base width / Base depth: Cylinder diameter: Air supply: Air consumption: Weight: 15,000 kg 1285 mm 921 mm 2206 mm 250 mm 844 / 1074 mm Ø 60 mm 8,5 - 12 bar 350 l/min 250 kg 10 : PIT JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 GGD150S Air hydraulic floor pit jack running in rails. Slim and compact design with traversing ram • Traversing ram ensures a wide reach under the vehicle and enables the mechanic to move freely back and forth in the pit • Base frame wheels fitted with bearings for optimum manoeuvrability • Ideal for dismounting and re-mounting of gearboxes • Rapid and precise air hydraulic unit with high speed ram travel • Built-in manual foot pump for easy and precise adjustment • Foot operated leaving hands free • Dead man’s release and overload valve for optimum safety Technical Data Description Dimension Capacity: Stroke: Min. height: Max. height: Traversing cylinder: Base width / Base depth: Cylinder diameter: Air supply: Air consumption: Weight: 15,000 kg 1285 mm 905 mm 2190 mm 250 mm According to pit width / 938 mm Ø 60 mm 8,5 - 12 bar 350 l/min 250 kg LIFTING EQUIPMENT CATALOGUE 11 JACKING BEAM & PIT JACK ACCESSORIES T4 - 1 T6 - 1 Cross beam adaptor Ideal for supporting axle, whilst allowing work to be done on the differential gear Offers increased safety – divides the load over 2 lifting points Usable with various extensions and saddles: FG100, FG200, FW2, US Increases min. height by 90 mm Fits: GD100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S Cross beam adaptor Hand wheel on the cross beam for easy and precise adjustment of lifting saddles without moving from the pit – ideal for inspection centres Usable with various extensions and saddles: FG100, FG200, FW2, US Increases min. height by 90 mm Fits: GD100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S T5 - 2 T6 - 2 Cross beam adaptor Ideal for supporting axle, whilst allowing work to be done on the differential gear Offers increased safety – divides the load over 2 lifting points Usable with various extensions and saddles: FG100, FG200, FW2, US Increases min. height by 136 mm Fits: FL60-2 / FL120-2 / FL160-2 / FL200-2 / GD100-2 / GD150-2 / GD200-2 Cross beam adaptor Hand wheel on the cross beam for easy and precise adjustment of lifting saddles without moving from the pit – ideal for inspection centres Usable with various extensions and saddles: FG100, FG200, FW2, US Increases min. height by 90 mm Fits: FL60-2 / FL120-2 / FL160-2 / FL2002GD-100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S LB FLTR Diff beam Allows use of both rams to lift at one point Fits: FL60-2 / FL120-2 / FL160-2 / FL200-2 / GD100-2 / GD150-2 / GD200-2 Trolley Practical trolley – designed for mounting and dismounting of heavy duty jacking beams on lifts Fitted with revolving wheels for easy manoeuvrability Fits: FL60-1 / FL120-1 / FL160-1 / FL200-1 / FL60-2 / FL120-2 / FL160-2 / FL200-2 12 : JACKING BEAM & PIT JACK ACCESSORIES FW2 / US AB V-saddle - FW2 Suitable for lifting under various axles U-saddle - US Suitable for lifting various chassis profiles Fits: All models Support bridge For safe and stable support of the vehicle The open frame offers optimum traversing cylinder mobility With leaf spring wheels for easy transport along the pit Usable with various extensions and saddles: FG100, FG200, FW2 and US FG100 / FG200 ABT Extension - FG100 Increases the lifting height by 100 mm Extension - FG200 Increases the lifting height by 200 mm Fits: FL60-1 / FL120-1 / FL160-1 / FL200-1 / FL60-2 / FL120-2 / FL160-2 / FL200-2 / GD100-1 / GD150-1 / GD200-1 / GD100-2 / GD150-2 / GD200-2 Telescopic support bridge Flexible support bridge can be used in different pits because of the adjustable width Opening in the middle for optimum flexibility when manoeuvring the jack With leaf spring wheels for easy transport along the pit Usable with various extensions and saddles: FG100, FG200, FW2 and US VB1 / VB2 AS3 Wall bracket - VB1 Robust wall bracket for storage of extensions and saddles (4 pcs.) Gearbox saddle 10º tilt in all directions for accurate dismounting and re-mounting of gearboxes Low minimum height for wide range of applications Fitted with 2 straps and 4 rubber cushions with magnets Weight: 24,5 kg Fits: GD100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S Wall bracket - VB2 Robust wall bracket for storage of extensions and saddles (8 pcs.) For more information visit: www.GarageEquipment.com.au or call 1800 777 318 LIFTING EQUIPMENT CATALOGUE 13 AXLES STANDS AB1,5 / AB3 AXLE STANDS WARNING: Always use axle stands to support the vehicle before working under it. No person shall remain in, on or under a load that is being jacked or is supported only by a jack. Standard axle stands • Suitable for more or less all types of vehicles i.e. passenger cars, trucks, buses, agricultural and contractors’ machinery • Adjustable in several heights (5-6 positions) • Robust construction ensures maximum stability and long life Technical Data Description AB1.5 - 260 AB1.5 - 420 AB3 - 320 Capacity: Min. height: Max. height: Width: Positions: Net Weight: 1,500 kg 260 mm 450 mm 270 mm 5 2.2 kg 1,500 kg 420 mm 750 mm 430 mm 5 3.6 kg 3,000 kg 320 mm 430 mm 310 mm 5 3.8 kg AB5 / AB8 Standard axle stands • Suitable for more or less all types of vehicles i.e. passenger cars, trucks, buses, agricultural and contractors’ machinery • Adjustable in several heights (5-6 positions) • Robust construction ensures maximum stability and long life Technical Data 14 : AXLES STANDS Description AB5 - 365 AB8 - 310 AB8 - 360 AB8 - 580 Capacity: Min. height: Max. height: Width: Positions: Net Weight: 5,000 kg 365 mm 590 mm 370 mm 5 6.4 kg 8,000 kg 310 mm 480 mm 300 mm 4 6.5 kg 8,000 kg 360 mm 590 mm 400 mm 5 10.5 kg 8,000 kg 580 mm 950 mm 600 mm 6 15.4 kg For more information visit: www.GarageEquipment.com.au or call 1800 777 318 ABS5 / ABS12 ABS8 Axle stands with spindle extension • User friendly axle stand – the spindle extension offers a quick and precise adjustment of the height • Suitable for more or less all types of vehicles • Model ABS5-230 is especially suitable for vehicles with low clearance e.g. buses, fork lift trucks and flat trailers • Robust construction ensures maximum stability and long life Extra high axle stands Technical Data Description ABS5 - 230 ABS12 - 320 ABS12 - 450 Capacity: Min. height: Max. height: Width: Positions: Net Weight: 5,000 kg 230 mm 320 mm 250 mm Spindle 5.0 kg 12,000 kg 320 mm 485 mm 300 mm Spindle 10.0 kg 12,000 kg 450 mm 725 mm 420 mm Spindle 14.0 kg AB16 ABS8 - 950 Axle stands for the heavy lifting jobs • Suitable for exceptionally heavy vehicles, e.g. large trucks, contractor’s machinery, military vehicles etc. • Adjustable in several heights (3-6 positions) • Robust construction ensures maximum stability and long life • Especially for supporting vehicles lifted by mobile columns or inground lifts • The spindle extension offer a quick and precise adjustment of the height • Strong transport wheels for easy and precise manoeuvring • Robust construction ensures maximum stability and long life Technical Data ABS8 - 1400 Technical Data Description AB16 - 290 AB16 - 440 AB16 - 675 Description ABS8 - 950 ABS8 - 1400 Capacity: Min. height: Max. height: Width: Positions: Net Weight: 16,000 kg 290 mm 455 mm 310 mm 3 15.0 kg 16,000 kg 440 mm 725 mm 460 mm 5 20.0 kg 16,000 kg 675 mm 1125 mm 550 mm 7 30.0 kg Capacity: Min. height: Max. height: Width: Positions: Net Weight: 8,000 kg 950 mm 1550 mm 650 mm Spindle 29.5 kg 8,000 kg 1400 mm 2000 mm 880 mm Spindle 35.0 kg LIFTING EQUIPMENT CATALOGUE 15 AIR HYDRAULIC JACKS AIR HYDRAULIC JACKS 16 : AIR HYDRAULIC JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 B25-2 25-1 / 25-1TH Portable air hydraulic jack – ideal for service vans etc. Single stage air hydraulic jack for heavy plant machinery and trucks • Minimum height of 221 mm • Hand-operated dead-man’s control for optimum safety whilst lifting and lowering • Designed for heavy-duty, intensive commercial use • 25-1TH model with telescopic handle increasing the • Hard chromium plated piston rod for long life reach under the vehicle to 2125 mm ensuring safe • Built-in safety overload valve and easy operation • With 2 extensions (50/100 mm) Technical Data • Low minimum height of only 162 mm and low weight of only 27 kg • Handy design - no loose tubes, handles or valves • Easy to operate – handle can be used for carrying, lifting, lowering and manoeuvring • Hard chromium plated piston rod for long life • Built-in safety overload valve • Hand-operated dead-man’s control for optimum safety whilst lifting and lowering • Transport locking device / wall bracket for both van and workshop (Option) • With 2 extensions (50/100 mm) Technical Data Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width (with wheels): Air supply: Air consumption: Weight: 25,000 / 10,000 kg 161 mm 234 / 317 mm 534 mm 550 mm 292 mm 9 - 12 bar 350 l/min 27 kg LIFTING EQUIPMENT CATALOGUE Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 25,000 kg 220 mm 345 mm 770 mm 1355 mm 160 mm 305 mm 9 - 12 bar 350 l/min 62 kg 25-1H / 25-1HTH Single stage air hydraulic jack for agricultural and contractors’ machinery, trailers and other high clearance applications • Minimum height of 360 mm • Hand-operated dead-man’s control for optimum safety whilst lifting and lowering • Maximum height of 610 mm, the F250 (optional) extension offers a total extended height of 860 mm • 25-1HTH model with telescopic handle increasing the reach under the vehicle to 2170 mm ensuring safe • Hard chromium plated piston rod for long life and easy operation • Built-in safety overload valve • With 2 extensions (50/100 mm) Technical Data Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 25,000 kg 360 mm 610 mm 820 mm 1355 mm 230 mm 310 mm 9 - 12 bar 350 l/min 71 kg 17 AIR HYDRAULIC JACKS 25-2 / 25-2TH 50-3 / 50-3TH Versatile 2-stage air hydraulic jack for buses and trucks • Minimum height of 183 mm • Designed for heavy-duty, intensive commercial use • Hard chromium plated piston rod for long life • Built-in safety overload valve Technical Data • Hand-operated dead-man’s control for optimum safety whilst lifting and lowering • 25-2TH model with telescopic handle increasing the reach under the vehicle to 2123 mm ensuring safe and easy operation • With 2 extensions (50/100 mm) 3-stage air hydraulic jack for low buses and other low clearance vehicles • Minimum height of only 151 mm combined with a • Built-in safety overload valve high lifting capacity • Hand-operated dead-man’s control for optimum • Telescopic cylinders ensure an excellent maximum safety whilst lifting and lowering lift together with a low closed height • 50-3TH model with telescopic handle increasing the • Designed for heavy-duty, intensive commercial use reach under the vehicle to 2165 mm ensuring safe and easy operation Technical Data • With 2 extensions (50/100 mm) Description Dimension Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 25,000 / 10,000 kg 183 mm 275 / 377 mm 768 mm 1355 mm 161 mm 307 mm 9 - 12 bar 350 l/min 60 kg Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 50,000 / 25,000 / 10,000 kg 151 mm 211 / 264 / 333 mm 810 mm 1355 mm 202 mm 308 mm 9 - 12 bar 350 l/min 67 kg 50-2 / 50-2TH 50-3H / 50-3HTH 2-stage air hydraulic jack for heavy buses and trucks • Minimum height of 221 mm • Designed for heavy-duty, intensive commercial use • Hard chromium plated piston rod for long life • Built-in safety overload valve Technical Data • Hand-operated dead-man’s control for optimum safety whilst lifting and lowering • 50-2TH model with telescopic handle increasing the reach under the vehicle to 2167 mm ensuring safe and easy operation • With 2 extensions (50/100 mm) 3-stage air hydraulic jack for high clearance vehicles • Minimum height of 221 mm and high maximum height of 560 mm • Designed for heavy-duty, intensive commercial use • Hard chromium plated piston rod for long life • Built-in safety overload valve Technical Data Description Dimension Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 50,000 / 25,000 kg 221 mm 338 / 447 mm 812 mm 1355 mm 202 mm 313 mm 9 - 12 bar 350 l/min 80 kg Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 50,000 / 25,000 / 10,000 kg 221 mm 338 / 447 / 560 mm 810 mm 1355 mm 202 mm 312 mm 9 - 12 bar 350 l/min 73 kg 18 : AIR HYDRAULIC JACKS • Hand-operated dead-man’s control for optimum safety by lifting and lowering • 50-3HTH model with telescopic handle increasing the reach under the vehicle to 2165 mm ensuring safe and easy operation • For safety reasons extensions are not included For more information visit: www.GarageEquipment.com.au or call 1800 777 318 65-1 / 65-1TH Air hydraulic jack for heavy contractors’ machinery • Minimum height of 245 mm with an extremely high capacity of 65 t • Designed for heavy-duty, intensive commercial use • Hard chromium plated piston rod for long life • Built-in safety overload valve Technical Data Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 65,000 kg 245 mm 382 mm 824 mm 1355 mm 202 mm 380 mm 9 - 12 bar 350 l/min 95 kg • Hand-operated dead-man’s control for optimum safety whilst lifting and lowering • 65-1TH model with telescopic handle increasing the reach under the vehicle to 2179 mm ensuring safe and easy operation • Supplied with 2 extensions (100/200 mm) and pneumatic tyres 65-1H / 65-1HTH Air hydraulic jack for heavy duty applications with high clearance • Minimum height of 423 mm • Built-in safety overload valve • Maximum height of 724 mm and with extensions up • Hand-operated dead-man’s control for optimum to 1024 mm safety whilst lifting and lowering • Designed for heavy-duty, intensive commercial use • 65-1HTH model with telescopic handle increasing the reach under the vehicle to 2337 mm ensuring safe • Hard chromium plated piston rod for long life and easy operation Technical Data • With 2 extensions (100/200 mm) Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 65,000 kg 423 mm 724 mm 982 mm 1355 mm 300 mm 380 mm 9 - 12 bar 350 l/min 138 kg LIFTING EQUIPMENT CATALOGUE Air Hydraulic Jacks Accessories SBB F250 Transport locking device and wall bracket for B25-2 FW Increase the maximum height by 250 mm FW1 Suitable for lifting under bolts, differential gear etc For lifting under different types of axles 19 AIRCRAFT JACKS AIRCRAFT JACKS 20 : AIRCRAFT JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 65-1AP Air hydraulic aircraft jack • Compact and slim design for easy operation and manoeuvrability • Telescopic handle increases the reach under the aircraft to 2170 mm and offers easy and safe operation Technical Data Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 65,000 kg 269 mm 431 mm 810 mm 950 - 1360 mm 200 mm 310 mm 9 - 12 bar 350 l/min 85 kg • The jack can be operated by either compressedair, nitrogen from the aircraft wheels or a mobile nitrogen service cart • Fitted with extension screw (80 mm) for optimum use of the stroke • Rapid ram retraction without load • Safety features include manual lowering valve, safety overload valve and dead mans release 25-2AP Air hydraulic aircraft jack • Compact and slim design for easy operation and manoeuvrability • Telescopic handle increases the reach under the aircraft to 2125 mm and offers easy and safe operation Technical Data Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Width: Width (with wheels): Air supply: Air consumption: Weight: 25,000 / 10,000 kg 180 mm 260 / 364 mm 765 mm 950 - 1360 mm 160 mm 310 mm 9 - 12 bar 350 l/min 56 kg LIFTING EQUIPMENT CATALOGUE • The jack can be operated by either compressedair, nitrogen from the aircraft wheels or a mobile nitrogen service cart • Rapid ram retraction without load • Safety features include manual lowering valve, safety overload valve and dead mans release 21 HYDRAULIC JACKS HYDRAULIC JACKS 22 : HYDRAULIC JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 DK13HLQ DK20HLQ High lifter with long reach, ideal for cars with low clearance • Very low minimum height of only 80 mm • Built-in safety overload valve • Wide and robust frame made of high-strength steel • Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection • Fitted with quick-lift pedal for easy reach of lifting point • Ergonomically designed handle ensuring positive and safe operation • Precise and safe control whilst lowering • Manual dead man’s release for optimum safety when lowering High lifting jack ideal for SUVs and vans • Very low minimum height of only 80 mm • Wide and robust frame made of high-strength steel • Fitted with quick-lift pedal for easy reach of lifting point • Precise and safe control whilst lowering • Manual dead man’s release for optimum safety when lowering Technical Data Technical Data Description Dimension Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Fame length: Width: Weight: 1,300 kg 80 mm 735 mm 940 mm 950 mm 160 mm 480 mm 39 kg Capacity: Min. height: Max. height: Frame length: Handle length: Fame length: Width: Weight: 2,000 kg 80 mm 795 mm 950 mm 950 mm 220 mm 500 mm 49 kg DK20 / DK20Q • Built-in safety overload valve • Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection • Ergonomically designed handle ensuring positive and safe operation DK50HLQ Jack for passenger cars and vans • Very low minimum height of only 80 mm • Wide and robust frame made of high-strength steel • Precise and safe control whilst lowering • Manual dead man’s release for optimum safety when lowering • Built-in safety overload valve Technical Data • Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection • Ergonomically designed handle ensuring positive and safe operation • DK20Q is fitted with quick-lift pedal for easy reach of lifting point High lifting jack for trucks, agricultural machinery & contractor’s machines • Low minimum height of only 140 mm • Manual dead man’s release for optimum safety when lowering • Can be fitted with pneumatic tyres for easy manoeuvring (option) • Built-in safety overload valve • Wide and robust frame made of high-strength steel • Ergonomically designed handle ensuring positive and safe operation • Fitted with quick-lift pedal for easy reach of lifting point • Precise and safe control whilst lowering Technical Data Description DK20 DK20Q Description Dimension Capacity: Min. height: Max. height: Frame length: Handle length: Fame length: Width: Weight: 2,000 kg 80 mm 495 mm 660 mm 950 mm 160 mm 410 mm 31 kg 2,000 kg 80 mm 495 mm 660 mm 950 mm 160 mm 410 mm 31 kg Capacity: Min. height: Max. height: Frame length: Handle length: Fame length: Width: Weight: 5,000 kg 140 mm 975 mm 1290 mm 1200 mm 265 mm 525 mm 170 kg LIFTING EQUIPMENT CATALOGUE 23 AIR HYDRAULIC JACKS DK100Q / DK120Q DK40Q / DK60Q Jack for light commercial vehicles • Very low minimum height of only 80 mm • Wide and robust frame made of high-strength steel • Precise and safe control whilst lowering • Manual dead man’s release for optimum safety when lowering • Built-in safety overload valve • Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection • Ergonomically designed handle ensuring positive and safe operation • DK20Q is fitted with quick-lift pedal for easy reach of lifting point Jack for trucks, agricultural machinery & contractor’s machines • Low minimum height of only 150 mm • Manual dead man’s release for optimum safety when lowering • Can be fitted with pneumatic tyres for easy manoeuvring (option) • Built-in safety overload valve • Wide and robust frame made of high-strength steel • Ergonomically designed handle ensuring positive and safe operation • Fitted with quick-lift pedal for easy reach of lifting point • Precise and safe control whilst lowering Technical Data Technical Data Description DK40Q DK60Q Description DK100Q DK120Q Capacity: Min. height: Max. height: Frame length: Handle length: Fame length: Width: Weight: 4,000 kg 140 mm 600 mm 800 mm 950 mm 240 mm 500 mm 95 kg 6,000 kg 140 mm 600 mm 800 mm 1200 mm 240 mm 500 mm 95 kg Capacity: Min. height: Max. height: Frame length: Handle length: Fame length: Width: Weight: 10,000 kg 150 mm 585 mm 805 mm 1200 mm 260 mm 530 mm 118 kg 12,000 kg 150 mm 585 mm 805 mm 1200 mm 260 mm 530 mm 118 kg Hydraulic Jacks Accessories T3 G4 Cross beam adaptor - Lifts the car for change of both wheels at the same time GS1 Rubber cushion - For protection of car body 24 : AIR HYDRAULIC JACKS High quality pneumatic tyres FDK1 FDK2 Extension for cars with high clearance (100 mm) Extension for cars with high clearance (125 mm) For more information visit: www.GarageEquipment.com.au or call 1800 777 318 LIFTING EQUIPMENT CATALOGUE 25 WHEEL TROLLEYS WHEEL TROLLEYS 26 : WHEEL TROLLEYS For more information visit: www.GarageEquipment.com.au or call 1800 777 318 WTA-500 WT-1500 Hydraulic wheel trolley for vans, trucks and buses Mechanical wheel trolley for tractors, agricultural and contractor’s machinery • Flexible and ergonomic wheel trolley for the easy removal of wheels and brake drums • Adjustable lifting arms for wheel sizes Ø 270 – 1300 mm • Lifting arms with roller bearings for easy rotation of the wheel into correct position • Pedal operated pump leaving both hands free for working • Bracket for easy securing of the wheel whilst transporting • Hand operated dead man’s release for optimum safety whilst lowering • Ideal for lifting brake drums, fuel tanks, tool boxes etc. • With 2 pcs. 360º revolving wheels Technical Data • Ergonomically designed for the easy and efficient removal of large wheels - also deep-treaded tractor tyres • Side-adjustable lifting arms for wheel diameters ranging 920-2300 mm • Robust safety wheel retaining bracket for the safe manoeuvring of the trolley • Precise and easy lifting and lowering by means of mechanical operation • Excellent manoeuvrability due to the 4 large, heavyduty revolving wheels • Lifting arms fitted with 3 roller bearings for ensuring the easy location of wheels Technical Data Description Dimension Description Dimension Capacity: Height: Length: Width: Roller-/fork length: Roller distance: Lifting height: Wheel size: Weight: 500 kg 1182 mm 870 mm 989 mm 416 / 600 mm 260 - 710 mm 717 mm Ø 270 - 1300 mm 100 kg Capacity: Height: Length: Width: Roller length: Roller distance: Roller diameter: Wheel size: Weight: 1,500 kg 1360 mm 1160 mm 1360 - 2380 mm 740 mm 720 - 1380 mm Ø 80 mm Ø 920 - 2300 mm 150 kg LIFTING EQUIPMENT CATALOGUE 27 CRANES CRANES 28 : CRANES For more information visit: www.GarageEquipment.com.au or call 1800 777 318 WJN5 / WJN10 WN11 / WN15 Hydraulic workshop crane for auto workshops and service vans • Foldable within seconds for quick and easy storage • Hard chromium plated piston rod and pump piston for long life • When folded the crane takes up a minimum of space on the workshop floor • Built-in safety overload valve • Jib arm with large lifting capacity – even in 5th • Fitted with 2 castors and 2 fixed wheels for easy position manoeuvrability even with maximum load • Lifting hook pivots 360ºt • Hand operated dead man’s release for optimum Technical Data safety whilst lowering Hydraulic workshop crane for auto workshops and industry • Commercial crane fitted with hard chromium plated piston rod and pump piston for longer life • Jib arm with large lifting capacity – even in 5th position • Pump rotates 360º for excellent operation in all working conditions Technical Data Description WJN5 WJN10 Description WN11 WN15 Capacity: Lifting height: jib arm: Frame height: Frame length: Height: Inner width: Frame width: Weight: 550 kg 2020 - 2340 mm 955 - 1375 mm 125 mm 1420 mm 1520 mm 955 mm 1080 mm 75 kg 1,100 kg 2020 - 2340 mm 955 - 1375 mm 125 mm 1420 mm 1520 mm 985 mm 1110 mm 95 kg Capacity: Lifting height: jib arm: Frame height: Frame length: Height: Inner width: Frame width: Weight: 1,100 kg 2260 - 2540 mm 1210 - 1630 mm 160 mm 1750 mm 1690 mm 820 mm 1000 mm 168 kg 1,500 kg 2260 - 2540 mm 1210 - 1630 mm 160 mm 1750 mm 1690 mm 820 mm 1000 mm 175 kg WN20 / WN25 WJN5EUR / WJN10EUR Hydraulic workshop crane with parallel legs for pallets • Foldable within seconds for quick and easy storage • When folded the crane takes up a minimum of space on the workshop floor • Jib arm with large lifting capacity – even in 5th position Technical Data • Hard chromium plated piston rod and pump piston for long life • Built-in safety overload valve • Fitted with 2 castors and 2 fixed wheels for easy manoeuvrability even with maximum load • Lifting hook pivots 360º • Hand operated dead man’s release for optimum safety whilst lowering Hydraulic workshop crane for auto workshops and industry • Commercial crane fitted with hard chromium plated piston rod and pump piston for long life • Jib arm with large lifting capacity – even in 5th position • Pump rotates through 360º for excellent operation in all working conditions Technical Data Description WJN5EUR WJN10EUR Description WN20 WN25 Capacity: Lifting height: jib arm: Frame height: Frame length: Height: Inner width: Frame width: Weight: 550 kg 2020 - 2340 mm 955 - 1375 mm 125 mm 1420 mm 1520 mm 975 mm 1100 mm 75 kg 1,100 kg 2020 - 2340 mm 955 - 1375 mm 125 mm 1420 mm 1520 mm 1015 mm 1140 mm 95 kg Capacity: Lifting height: jib arm: Frame height: Frame length: Height: Inner width: Frame width: Weight: 2,000 kg 2340 - 2630 mm 1210 - 1630 mm 160 mm 1750 mm 1850 mm 840 mm 1020 mm 250 kg 2,500 kg 2340 - 2630 mm 1210 - 1630 mm 160 mm 1750 mm 1850 mm 840 mm 1020 mm 255 kg LIFTING EQUIPMENT CATALOGUE • Built-in safety overload valve • Wheels revolve 360º for easy manoeuvrability even with maximum load • Lifting hook pivots 360º • Hand operated dead man’s release for optimum safety whilst lowering • Inner frame width enables use with Euro pallets • Built-in safety overload valve • Wheels revolve 360º for easy manoeuvrability even with maximum load • Lifting hook pivots 360º • Hand operated dead man’s release for optimum safety whilst lowering • Inner frame width enables use with Euro pallets 29 TRANSMISSION JACKS VL3 / VL6 / VL10 TRANSMISSION JACKS Hydraulic transmission jack • Pedal operated pump leaving both hands free for working • Precise adjustment for positioning of transmission • Hand operated dead man’s release for optimum safety whilst lowering • Galvanised support saddle and base frame • Built-in safety overload valve • Sturdy swivel castors for optimum stability and manoeuvrability • Hard chromium plated piston rod and pump piston for long life • Also suitable for many other lifting operations such as mounting of springs, fuel tanks, exhaust pipes etc. Technical Data 30 : TRANSMISSION JACKS Description VL3 VL6 VL10 Capacity: Min. height: Max. height: Width: Weight: Wheel diameter 300 kg 1130 mm 1965 mm 530 mm 33 kg Ø 80 mm 600 kg 1130 mm 1965 mm 530 mm 33 kg Ø 80 mm 1,000 kg 1170 mm 2000 mm 550 mm 40 kg Ø 125 mm For more information visit: www.GarageEquipment.com.au or call 1800 777 318 VLT6 Transmission jack with pneumatically controlled high speed • Pneumatically controlled high speed guarantees • The 3 stage telescopic cylinder ensures a very low quick and efficient lifting minimum height • Large and robust swiveling wheels (2 with locks) • 5 legs offers the best stability on the market offers optimum manoeuvrability • Simple operation by use of 3 pedals leaving both • Built-in safety overload valve hands free for working AS1 AS3 Technical Data Description Dimension Capacity: Stroke: Min. height: Max. height: Height step 1/2/3 Air capacity step 1/2/3 Width: Wheel size: Air supply: Weight: 600 kg 1195 mm 720 mm 1915 mm 1120 mm / 1520 mm / 1915 mm 200 kg / 120 kg / 60 kg 950 mm Ø 125 8,5-12 bar 55 kg Gearbox saddle Gearbox saddle • Capacity: 0.5 h • Dimension: 352 x 307 x 118 mm • Can be tilted + / - 10 º in all directions for precise removal and installation of passenger car transmissions • Incl. 2 straps and 2 magnetic rubber pads • Weight: 18.5 kg VLT12 Hydraulic transmission jack with telescopic cylinder • Especially for lifting heavy truck transmissions • Ideal for workshop pits due to low minimum height and long stroke • Pedal operated pump with built-in quick lift leaving both hands free for working • Precise adjustment for positioning of transmission • Hand operated dead man’s release for optimum safety whilst lowering • Capacity: 1 t • Dimension: 542x385x110 mm • 10º tilt in all directions for accurate dismounting and re-mounting of gearboxes • Low minimum height for wide range of applications • Fitted with 2 straps and 4 magnetic rubber support blocks • Weight: 24,5 kg • Fits: GD-1, GGD, VL10 & VLT12 S GS1 / GS2 Saddle Rubber cushion • Galvanised support saddle and base frame • Built-in safety overload valve • Sturdy swivel castors (2 lockable) for optimum stability and manoeuvrability Technical Data Description Dimension Capacity: Min. height: Max. height: Width: Wheel diameter: Weight: 1,200 kg 905 mm 1920 mm 720 mm Ø 125 70 kg LIFTING EQUIPMENT CATALOGUE • Suitable for mounting springs, fuel tanks, exhaust pipes etc. • For protection of car body 31 LIFTING EQUIPMENT ACCESSORIES Lifting Equipment Accessories 32 : LIFTING EQUIPMENT ACCESSORIES FSD1 FSD5 HSD / HSD-A Air-line connection - HSD Set for jacking beam Fits: SD20PHl, SD26PHl, SD40PHl Extension Increases the lifting height by 130 mm (order 2 units) Fits: SD20l, SD26l, SD20PHl, SD26PHl, SD20PHl-a, SD26PHl-a Saddle with spindle Increases the lifting height by 106-240 mm. (order 2 units) Fits: SD20l, SD26l, SD20PHl, SD26PHl, SD20PHl-a, SD26PHl-a Air-line connection - HSD-A Set for automatic jacking beam Fits: SD20PHl-a, SD26PHl-a FSD2 FSD6 WTK Rubber support Block for protection of car body (40 mm) (order 2 units) Fits: all jacking beams Adjustable saddle Increases the lifting height by 32-92 mm (order 2 units) Fits: SD20l, SD26l, SD20PHl, SD26PHl Crane arm for disc brakes, cal- lipers, etc. (Option) Mounted with the telescopic crane arm the wheel trolley is a universal lifting tool. The crane arm offers efficiency and good ergonomics when lifting disc brakes, brake drums, callipers, etc. The crane arm easily swivels to one side to allow wheel removal operations to be carried out. Fitted with 360º pivoting hook FSD3 FSD7 S200 Rubber support Block for protection of car body (80 mm)(order 2 units) Fits: all jacking beams Extension For FSD6 increases the lifting height by 60 mm (order 2 units) Fits: SD20l, SD26l, SD20PHl, SD26PHl Integrated safety stand Mechanical locking of the load prevents unintended lowering adjustable in 6 positions. Increases the minimum height of the pit jack by 65 mm Fits: gD100-1, gD150-1, gD200-1 For more information visit: www.GarageEquipment.com.au or call 1800 777 318 P/ 1800 777 318 F/ 1300 785 737 E/ [email protected] W/ www.garageequipment.com.au 17 Canberra Street, Hemmant QLD 4174 PO Box 7120, Hemmant QLD 4174