Catalogue Pdf - Western Marine Company

Transcription

A Major Manufacturer
Producing High Quality
Marine Engine Products
2015 Catalogue
www.hgemarine.com
Table of Contents
MerCruiser - Aluminum
V6 Manifold, V8 Small Block Manifold............................................................. 4
V8 Big Block Manifold...................................................................................... 5
Riser................................................................................................................ 5
OMC King Cobra Conversion Kit, Spacer....................................................... 6
MerCruiser
V6 In-Line Manifold.......................................................................................... 7
V6 Manifold...................................................................................................... 7
V6 & V8 Dry Joint Manifolds............................................................................ 8
V8 Small Block Manifold ................................................................................. 9
V8 Big Block Manifold...................................................................................... 9
470 Elbow / Reservoir .................................................................................... 10
Risers............................................................................................................... 10-12
Spacers........................................................................................................... 12-13
End Plates, Water Fittings & Thermostat Housing Kit..................................... 13
Generic
Ford Small Block V8........................................................................................ 14-15
OMC/Volvo
V6 Manifold ..................................................................................................... 15
V8 Small Block Manifold.................................................................................. 16
OMC Risers..................................................................................................... 16-17
Volvo
4 Cylinder Engine Manifolds............................................................................ 17-18
V6 Engine Manifold......................................................................................... 18
V8 Small Block Manifold.................................................................................. 19
V6 & V8 Risers................................................................................................ 19-20
4 Cylinder Exhaust Bend................................................................................. 20
Volvo Penta Water Connector.................................................................. 20
Volvo Penta Diesel Elbows....................................................................... 21
Yanmar and Detroit Diesel Elbows......................................................... 21
Accessories
Engine Mounts, Full Circle Damper & Bell housing / Flywheel housing.......... 21-23
Conversion Chart........................................................................................ 24
Installation Examples................................................................................. 24-27
2
Aluminum Products - Introduction
HIGHLIGHTS OF THE 356-T6 ALUMINUM ALLOY MANIFOLD
1. WHAT DOES “LPC” STAND FOR?
A.“LPC” or “Low Pressure Casting” is a casting method that uses the pressure of inert gas to force the molten
liquid metal from the bottom of the holding pot through a riser pipe into the tooling mold directly above.
B. After the casting cools and solidifies, the pressure is reduced.
C. The pressure applied usually does not exceed 1.0 bar, hence “low pressure casting”.
2. WHY IS “LPC” SUPERIOR TO “LOST FOAM” CASTING?
A. The technology of “Lost Foam” casting is carried out by gravitational force (0.0689 bar, 1 atmosphere
pressure) while LPC is done by pressurizing the molten liquid metal, usually at around 0.3 ~ 0.8 bar,
4.35~11.6 atmosphere pressure.
B. LPC can be carefully controlled to eliminate porosity in the casting wall. This is because the molten metal
becomes denser as it is squeezed into the mold by pressure, thus preventing gas bubbles and inclusions.
The results are as superior as those produced by forging (manifolds can not be produced by forging).
C. The LPC method allows for improved filling of thin-walled parts and large areas of tooling.
3. WHY CHOOSE 356-T6 ALLOY AND POWDER COAT FOR HGE MANIFOLDS?
A. To prevent the manifold and the riser elbow from being corroded by its saline environment.
B. The shiny powder coating not only enhances the attractiveness of the surface, but also increases the
longevity of the manifold.
4. WHY ARE ALUMINUM ALLOY MANIFOLDS MORE PREFERABLE THAN CAST IRON?
A. The persistent problem of corrosion can be overcome.
B. The weight of the traditional cast iron manifold and is greatly reduced (aluminum is 1/5th the weight of iron).
C. The cost of iron ore remains high due to the demand from heavy construction, but demand for aluminum
ore has been steady declining. Aluminum is more economical.
5. ALUMINUM MANIFOLDS MYTHS
A. Myth 1: It acts like an anode! Not true. The 356-T6 alloy is common; evidenced by the many large and small
aluminum boats in the marina.
B. Myth 2: The manifold will warp easily! Not true. If the aluminum manifolds have good water cooling, they
are an excellent heat conductive material. In nearly all automobiles today, aluminum is used for the engine
head, intake manifold and engine block to reduce weight. Also, bear in mind the car engine runs 40 ~ 60
degrees F hotter than the boat engine.
3
MerCruiser - V6 Manifold ■ Aluminum
HGE 9746-A
Aluminum MerCruiser V6 Manifold
(Includes mounting kit)
Replaces:
Barr #.................... MC-1-99746
GLM #................... 51220,51225
Marine Power #.... 0996-000
MerCruiser #......... 99745, 99746
Osco #.................. 9745
Sierra #................. 18-1952-1
This manifold fits the following engines
MerCruiser GM V6
229 cu.in. and 262 cu.in. engines Model 185R, 185MR, 205R and 205MR
Aluminum Riser
HGE 4354-A
4” exhaust outlet, 7° down angle center riser (Aluminum)
Mounting Kit # HGE 9746-AMK
Matching riser page 5
Content
Qty
Manifold Gasket HGE 99757
1
Riser Gasket (restrictor) HGE 41813
1
T-Housing Gasket HGE 89656
1
Bolt 3/8”-16UNC x 5”
6
+ Flat Washer
Aluminum Plug 3/4” NPT
6
2
MerCruiser - V8 Small Block Manifold ■ Aluminum
HGE 7114-A
Aluminum MerCruiser V8 Small Block Manifold
Replaces:
Barr # .................. MC-1-87114
GLM # ................. 51230, 51235
Marine Power # ... 0994-100
MerCruiser # ........ 87114, 860246
Osco # ................ 7114B2
Sierra # ................ 18-1953-1
MerCruiser V8
GM Small Block V8 305 - 350 cu.in. engine Models 220, 228, 230, 260 & 898
Aluminum Riser
HGE 4354-A
Content
1
1
Bolt 3/8" 16UNC x 5"
4
+ Washer
4
Qty
4
1
2
MerCruiser - V8 Big Block Manifold ■ Aluminum
HGE 9011-A
MerCruiser V8 Big Block Manifold
Replaces:
Barr# .................... MC-1-89011
GLM# ................... 51240,51245
Marine Power# .... 0991-100
MerCruiser# ......... 89011, 807078
Osco# .................. 9011
Sierra# ................. 18-1957-1
MerCruiser GM V8 Big Block 330, 340 and 454 Magnum Inboard and stern-drive unit
Aluminum Riser
HGE 4354-A
Content
Qty
1
1
Stud 1-3/4” Long, (one end 3/8”-16UNV;
8
One end 3/8”-24UNF)
+ Nut
8
+ Washer
8
2
MerCruiser - V6, V8 Center Riser ■ Aluminum
HGE 4354-A
Ford Center Riser Style V8 Manifold
Replaces:
Barr # ................... MC-20-44354
GLM # ................. 55140,51145
MerCruiser # ........ 44354, 807914, 807988
Osco # ................. 4354
Sierra # ................ 18-1976-1
This riser fits to following aluminum manifolds
Ford Small Block V8
302-351 C.I.D. V8 Engines
Manifolds
HGE 9011-A
(MC-1-89011)
MerCruiser GM V8 big block Models 330, 340 and 454 Magnum Inboard
and stern-drive units
HGE 7114-A
MerCruiser GM V8 small block 228R, 260R, 898R
(MC-1-87114)
HGE 9746-A
(MC-1-99746)
MerCruiser GM V6 229 and 262 cu. in. Model 185R, 185MR, 205R and
205MR
Content
Qty
Riser Gasket (close) HGE 41811
1
1
Bolt 3/8" 16UNC x 5-1/2"
4
+ Washer
4
1
5
Accessories - Spacer ■ Aluminum
HGE 3320-A
Replaces:
Barr # ................... MC-29-861493
Sierra # ................ 18-1910
MerCruiser #......... 861493A
Includes mounting kit
For use with
aluminum
manifolds and
risers only
3” Spacer Block, Fits MerCruiser manifolds HGE 7114-A, HGE 9746-A and HGE 9011-A
Mounting Kit # HGE 3320-MK
Included with spacer
Content
Qty
Riser Gasket (restrictor)
2
Stud 1-3/4” Long, (one end 3/8”-16UNV
one end 3/8”24UNF)
4
+ Nut
4
+ Lock Washer
4
Steel Plug 3/4” NPT
1
2
460K King Cobra Conversion Adapter Kit ■ Aluminum
HGE 460MK
Includes 2 aluminum adapters,
gaskets & bolts
This kit allows OMC 460 heads to be used with MerCruiser style aluminum
big block manifolds Part # HGE 9011-A and HGE # 4354-A risers.
Engines
OMC King Cobra
6
OMC Ford 460 V8 engine
For use with
aluminum
manifolds and
risers only
MerCruiser - In-Line 6 Cylinder (165 & 200) Manifold
HGE MC-1-58759
This manifold fits the following engine
MerCruiser In-Line 6
Direct replacement water cooled manifold to fit the GM 6 cyl. 250 & 292
cu. in. engines. Replaces MerCruiser Part # B-58759A1
Included with manifold
Content
Qty
Manifold Gasket MC-47-27-46401
1
Exhaust elbow mount kit MC-20-60426P
1
Mounting package MC-1-58759P
1
Manifold gasket MC-47-27-46401
1
End gasket MC-27-48043
2
MerCruiser - V6 Manifold
HGE 9746
Replaces:
Barr # ................... MC-1-99746
GLM # .................. 51220
MerCruiser # ........ 99745, 99746
Osco # ................. 9745
Sierra # ................ 18-1952-1
MerCruiser V6 Manifold
MerCruiser GM V6
229 cu.in. and 262 cu.in. engines Model 185R, 185MR, 205R and 205MR
Riser
HGE 4354
4” exhaust outlet, 7° down angle center riser
Content
Qty
1
1
6
+ Flat Washer
6
2
7
MerCruiser - V6 Manifold ■ Dry Joint
HGE 4612
Replaces:
MerCruiser # ........ 864612T01
MerCruiser SB V6
GM 4.3 V6 Engines
Riser
HGE 4309
4” Exhaust Outlet, 7° Down Angle, 6.72” in Height, Center Dry Joint Riser
Content
Qty
1
Stainless Steel Plate Gasket HGE 45460
1
Open Seal Ring HGE 45470
1
Restrictor Seal Ring HGE 45480
1
Closed Seal Ring HGE 45490
2
6
+ Lock Washer
6
2
Brass Plug 3/4” NPT
2
MerCruiser - V8 Small Block Manifold ■ Dry Joint
HGE 5735
MerCruiser SB V8
Replaces:
MerCruiser # ........ 865735A02
Barr Marine # ....... MC-1-865735
Mallory ................. 9-40508
GM 5.0, 5.7 & 6.2 V8 Engines
Risers
HGE 4309
4” Exhaust Outlet, 7° Down Angle, 6.72” in Height, Center Dry Joint Riser
HGE MC-20-864591
Barr Marine Dry Joint Exhaust Riser
8
Content
Qty
1
1
1
1
2
4
+ Lock Washer
4
2
1
2
MerCruiser - V8 Small Block Manifold
HGE 7114
Aluminum MerCruiser V8 Small Block Manifold
Replaces:
Barr # ................... MC-1-87114
GLM # .................. 51230
MerCruiser # ........ 87114, 860246
Osco # ................. 7114B2
Sierra # ................ 18-1953-1
MerCruiser V8
GM Small Block V8 305 - 350 cu.in. engine Models 220, 228, 230, 260 and
898
Risers
HGE 4354
MC-20-98502
3" exhaust outlet, 0° center riser
Matching risers pages 11-12
Content
Qty
1
1
4
+ Washer
4
1
2
MerCruiser - V8 Big Block Manifold
HGE 9011
MerCruiser V8 Big Block Manifold
Replaces:
Barr # ................... MC-1-89011
GLM # .................. 51240
MerCruiser # ........ 89011, 807078
Osco # ............... 9011
Sierra # ................ 18-1957-1
MerCruiser GM V8 Big Block 330, 340 and 454 Magnum Inboard and stern-drive unit
Risers
HGE 4354
MC-20-98502
3" exhaust outlet, 0° center riser
Matching risers pages 11-12
Content
Qty
1
1
8
+ Nut
8
+ Washer
8
2
9
MerCruiser - 470 Cylinder Elbow / Reservoir
HGE 8561
Replaces:
MerCruiser # ........ 98562A6
Sierra# ................ 18-1937
Mallory # .............. 9-40551
MerCruiser Elbow
This elbow fits the following engines and manifolds
Engines
MerCruiser
MerCruiser 224 I/L4 Engine, 165/170/180/190/470/3.7L
Content
Elbow/Reservoir Gasket HGE 88562
Bolt 7/16”-14UNC x 4”
Qty
1
4
+ Lock Washer
4
3
1
MerCruiser - Riser
HGE 2076
Replaces:
Barr # ................... MC-20-12076
MerCruiser # ........ 12076
Osco # ................. 2076
Sierra # ................ 18-1975
MerCruiser Riser
The riser fits to following manifolds
Manifolds
860235A03
806867A12
99798A 9
816329A3
MC-1-99798
MC-1-95862
MC-1-96705
18-1956-1
18-1955-1
18-1954-1
MerCruiser 4 Cyl 3.0L Exhaust Manifold
Barr Marine Ex4 Cyl exhaust Manifold
Barr Marine Exhaust Manifold
Barr Marine Exhaust Manifold
Sierra 4 Cyl 2.5L & 3.0L Exhaust Manifold
Content
Riser Gasket (open) HGE 99777
1
Bolt 3/8”-16UNC x 2-1/2” (thread 1”)
2
+ Lock Washer
10
Qty
2
MerCruiser - V6, V8 Center Riser
HGE 4354
Replaces:
Barr # ................... MC-20-44354
GLM # .................. 55140
MerCruiser # ........ 44354, 807914, 807988
Osco # ................. 4354
Sierra # ................ 18-1976-1
MerCruiser Centre Riser
4” exhaust outlet, 7° down angle
Manifolds
HGE 9011
(MC-1-89011)
MerCruiser GM V8 Models 330, 340 and 454 Magnum Inboard and stern-drive
units
HGE 7114
MerCruiser GM V8 228R, 260R, 898R
(MC-1-87114)
HGE 9746
(MC-1-99746)
Content
MerCruiser GM V6 229 and 262 cu. in. Model 185R, 185MR, 205R & 205MR
Qty
1
1
Bolt 3/8” -16UNC x 5-7/8”
4
+ Lock Washer
4
1
MerCruiser - V6 Center Riser ■ Dry Joint
HGE 4309
Replaces:
MerCruiser # ........ 864309T02
Dry Joint, 7° down angle
Manifolds
HGE 4612
HGE 5735
MerCruiser Dry Joint GM V6 Exhaust Manifold
MerCruiser Dry Joint GM V8 Exhaust Manifold
Included with riser
Content
Qty
1
1
1
2
Bolt 3/8” -16UNC x 5-7/8”
4
+ Lock Washer
4
1
11
MerCruiser - Riser V8-5.0L, 5.7L AND 6.2L ■ Dry Joint
HGE MC-20-864591
MerCruiser Riser
Direct replacement exhaust riser/ elbow. Replaces
MerCruiser part # 864591T02. Riser will replace the
equivalent part number used on 4.3L Models as well.
Mounting Kit
Content
Qty
MC -20-864591P
1
MerCruiser - V8 Models 898R, 228R and 260R
HGE MC-20-98502
MerCruiser Centre Riser
Direct replacement water cooled center discharge riser.
Replaces MerCruiser part #98502A2. Accepts 3” I.D.
exhaust hose (0 degree angle).
Mounting Kit
Content
MC -20-44354P
Qty
1
Accessories - Spacers
HGE 3320
HGE 3320PR
Includes mounting kits
Replaces:
Barr # ................... MC-20-93320A3
MerCruiser # ........ 93320
Osco # ................. 3320
Sierra # ................ 18-1908
3” Spacer Block, fits MerCruiser manifolds HGE 7114, HGE 9746 and HGE 9011
Included with spacer
Content
12
Qty
Riser Gasket (restrictor)
2
Stud 1-3/4” Long, (one end 3/8”-16UNV
one end 3/8”-24UNF)
4
+ Nut
4
+ Lock Washer
4
1
2
Accessories - Spacers ■ Dry Joint
HGE MC-20-864929A3
Includes mounting kits
Direct replacement 3 inch spacer kit. Replaces MerCruiser part # 864929A 3. Kit includes a
pair of spacers, mounting hardware and gaskets for raw water cooled applications. Need to
purchase additional block off gaskets for closed cooled applications.
MerCruiser V8-4.3L, 5.0L, 5.7L AND 6.2L “DRY JOINT” SPACERS
Accessories - End Plate
Replaces:
Barr # ................... 1-60252
GLM # .................. 51010
MerCruiser # ........ 60252
Osco # ................. 60252
Sierra # ................ 18-4009
HGE 0252
End Cap/Connector (front), 1” hose. Fits MerCruiser
Log Style manifolds HGE 7234, HGE 7235 and HGE
8759. Package includes mounting kit.
1” hose end cap / connector (front) for MerCruiser Log Style Manifolds
Manifolds
HGE 7234 (Port)
HGE 7235 (Starboard)
MerCruiser GM Small Block V8 305 - 350 cu. in.
Models 198, 228, 255, 260 and 898 inboard and stern-drive units
HGE 8759
MerCruiser GM In-Line Six Cylinder 250 and 292 cu. in.
Model 165 and 200
Content
Qty
End Gasket HGE 48043
1
Bolt 5/16”-18UNC x 1”
4
+ Lock Washer
4
Accessories - MerCruiser - 3.0L Engine Thermostat Housing Kit
HGE 1493
Replaces:
Barr #.................... MC-29-861493
Sierra #................. 18-1910
MerCruiser #......... 861493A
GM 3.0L/182 CID 4-Cylinder Engine
13
GM Small Block V8 - Generic Manifold
HGE 1-83
GM Center Riser Style V8 Manifold
Replaces:
Barr # ................... CHV-1-83
GLM # .................. 56230
Osco # ................. 994
Sierra # ................ 18-1997-1
Chris Craft V8
283, 302, 305, 307, 327 and 350 cu.in. All models.
Crusader V8
283, 305, 307, 327 and 350 cu.in. All models inboard and stern-drive units. 305
and 350 cu.in. Champion series inboard units.
Daytona V8
Models 200-283 and 300-327.
Flagship V8
283, 327 and 350 cu.in.
MerCruiser V8
Models 190, 198, 225, 228, 250, 255, 260, 270, 280 and 898 inboard and sterndrive units.
OMC V8
283, 305, 307 and 350 cu.in. Models 185, 200, 225, 230 and 260 h.p. 245 Jet
Drive.
Pacer V8
305, 307 and 350 cu.in. All models 1965 and up inboard and stern-drive units.
Volvo V8
307 and 350 cu.in. All models.
Riser
HGE 0082
3” exhaust outlet center riser
Mounting Kit # 1-83MK
Content
Qty
1
1
Bolt 3/8”-16UNC x 3-1/2”
6
+ Lock Washer
6
3
Ford Small Block V8 - Generic Manifold
HGE 1-81
Ford Center Riser Style V8 Manifold
Replaces:
Barr # ................... FM-1-83
GLM # .................. 56250
Osco # ................. FL-994
Sierra # ................ 18-1998-1
Ford Small Block V8
302-351 C.I.D. V8 Engines
Riser
HGE 0082
14
3” exhaust outlet center riser
Mounting Kit # 1-81MK
Content
Qty
1
1
Bolt 3/8”-16UNC x 3-3/4”
4
+ Lock Washer
4
3
Center Riser
Replaces:
Barr # ................... 20-0082
GLM # .................. 56110
Osco # ................. 992
Sierra # ................ 18-1999
HGE 0082
Centre Riser
3” outlet, 10° down angle. Use 3” i.d. flexible exhaust hose which facilitates connection to existing
exhaust pipes
Manifolds
HGE 1-81
HGE 1-83
Barr CHVA-1-84
Commander V8 302 and 351 cu. in. All models, all years
Crusader V8 302 and 351 cu. in. All models, all years.
Indmar V8 302 and 351 cu. in. All models, all years.
Intercepter V8 221, 260, 289, 302 and 351 cu. in. All years.
MerCruiser V8 Models 188, 215, 225, 233, 255, 302, 351 and 888 cu. in. All years
OMC V8 302 and 351 cu. in. Models 170, 175, 190, 235, 240 and 250 h.p.
Palmer V8 302 and 351 cu. in. All years
Pleasurecraft V8 302 and 351 cu. in. All years
Volvo V8 307 and 340 cu.in. All models
Waukesha V8 302 and 351 cu. in. All years
Chris Craft V8 283,302, 305, 307, 327 & 350 cu. in. All models.
Crusader V8 283, 305, 307, 327 and 350 cu. in. All models inboard and stern-drive
units. 305 and 350 cu.in. Champion series inboard.
Daytona V8 Models 200-283 and 300-327.
Flagship V8 283, 327 and 350 cu. in.
MerCruiser V8 Models 190, 198, 225, 228, 250, 260, 270, 280 and 898 Inboard
and stern-drive units.
OMC V8 283, 305, 307 and 305 cu. in. Models 185, 200, 225, 230 and 260 h.p.
245 Jet Drive.
Pacer V8 305, 307 and 350 cu. in. All models 1965 and up Inboard and sterndrive..
Content
Qty
1
1
4
+ Nut
4
+ Lock Washer
4
1
Chris Craft V8 454 cu. in.
Crusader V8 427 and 454 cu. in. All models Inboard.
MerCruiser V8 Models 325, 330, 340 and 350 Inboard and stern-drive units.
Barr CHVA-1-84 , CHV-1-83, FM-1-83
Osco 994, FL994, CW994
OMC/VOLVO - GM V6 Manifold
HGE 7656
OMC/Volvo GM V6 Manifold
Replaces:
Volvo# 3852338, 385756
Fits Volvo v6 4.3L engine, 1995 and up, OMC v6 4.3L engine, 1991 and up
Riser
HGE 3784
Center riser, 4” exhaust outlet, 7° down angle
Content
Qty
HGE 99757 - Manifold Gasket
1
HGE 43783 - Riser Gasket (open)
1
Bolt 3/8”-16UNC x 4-3/8”
6
+ Lock Washer
6
Steel Plug 1/2”” NPT
1
15
OMC/VOLVO - GM V8 Small Block Manifold
HGE 4035
OMC/Volvo V8 Small Block Manifold
Replaces:
Barr # ................... OMC-1-914035
GLM # .................. 51430
OMC # ................. 914035, 3852374
Osco # ................. 57579
Sierra # ................ 18-1986
Volvo # ................. 3852374-2
Volvo 305-350 C.I.D. GM small block V8 engine, year 1994 and up
Riser
HGE 3784
Center riser, 4” exhaust outlet, 7° down angle
Content
Qty
Manifold gasket HGE 0000
1
1
Bolt 3/8”-16UNC x 4-3/8”
6
+ Lock Washer
6
2
1
OMC - 2.3L Riser
HGE 3394
Replaces:
OMC # ................. 913394
OMC 2.3L Riser
The riser fits to following manifold
Manifold
HGE 6041
OMC 2.3L Exhaust Manifold
Content
Riser Gasket HGE 912477
1
2
+ Lock Washer
Bolt 3/8”-16UNC x 1-1/2”
+ Lock Washer
16
Qty
2
2
2
OMC/VOLVO - GM V6/V8 Center Riser
HGE 3784
Replaces:
Barr # ................... OMC-20-913784
GLM # .................. 51330
OMC # ................. 913784, 3855270, 3850456
Osco # ................. 50456
Sierra # ................ 18-1909
Volvo # ................. 3855270-9
OMC/Volvo Riser
Center riser, 4” exhaust outlet, 7° down angle.
Manifolds
HGE 4035
Volvo 305-350 C.I.D. GM small block V8 engine, year 1994 to 2001.
HGE 7656
Volvo V6 4.3L engine, 1995 and up, OMC V6 4.3L engine, 1991 and up.
Content
Qty
1
Bolt 3/8”-16UNC x 7-3/8”
4
+ Flat Washer
4
+ Lock Washer
4
1
2
2
VOLVO - 4 Cylinder Engine Manifold
HGE 4532
Replaces:
Barr # ................... VO-1-824532
Volvo # ................. 824532-6
Volvo 4-Cylinder Manifold
Fits Volvo 4-Cylinder Models AQ 115 and 130 Log Style
Riser
HGE 5599
Exhaust bend
Matching exhaust bend page 20
Content
Qty
1
HGE 56028 - Riser / End Gasket
2
Bolt 5/16” x 4-1/2”
2
+ Lock Washer
2
Stud 5/16"x 3"
1
+ Nut
1
+ Lock Washer
1
17
VOLVO - 4 Cylinder Engine Manifold
HGE 5387
Replaces:
Barr # ................... VO-1-855387
GLM # .................. 51610
Osco # ................. VO-418
Sierra # ................ 18-1930-1
Volvo # ................. 834438-4, 855387-7
Volvo 4-Cylinder Manifold
Fits Volvo 2.3L and 2.5L 4-Cylinder engine. Models AQ120B, 125A, 131A B C D, 140A, 145A BB,
151A/B/C, 230A/B, 250A/B.
Content
Qty
4
Bolt M8 x 1,25 - 130 mm
7
+ Lock Washer
Bolt M8 x 1.25 - 110 mm
7
1
+ Lock Washer
1
Brass Plug 1/4" NPT
1
VOLVO - V6 Engine Manifold
HGE 6894
Volvo V6 4.3L Engine Manifold 1993 & before
Replaces:
Volvo # ................. 856894-1
GLM # .................. 54640
Sierra # ................ 18-1932
Fits Volvo V6 4.3L engine 1993 & before, Model AQ150, AQ150A, AQ150B, AQ175A, AQ205A,
AQ430A, AQ430B, AQ431A, AQ431B, AQ432, AQ434.
Riser
HGE 7037
18
Centre riser
Content
Qty
1
1
5
+ Lock Washer
5
Steel Plug 1/2" NPT
1
VOLVO - GM V8 Small Block Manifold
HGE 5804
Volvo V8 Small Block Manifold
Replaces:
Barr# .................... VO-1-835804
GLM# ................... 51630
Osco# .................. 5805
Sierra# ................. 18-1931-1
Volvo # ................ 835804, 835805, ............................. 835806, 856883
Fits Volvo GM V8 small block 305 - 350 cu. in. engines. Models AQ and BB 200, 205, 211, 231, 225,
260, 271, 290, 311, 500, 501, 570, 571 and 572
Riser
HGE 5384
3-3/4"(95 mm) exhaust outlet, 30° down angle riser.
Content
Qty
1
1
Bolt 3/8”-16UNC x 5-1/8”
6
+ Lock Washer
6
2
1
VOLVO - V6 Engine Center Riser
HGE 7037
Replaces:
Volvo # ................. 857037-6
GLM # .................. 51520
Sierra # ................ 18-1936
Volvo V6 Riser
This riser fits Volvo V-6 engine model AQ175
Manifold
HGE 6894
Volvo V6 4.3L engine, Model AQ150, AQ150A, AQ150B,
AQ175A, AQ205A, AQ430A, AQ430B, AQ431A, AQ431B,
AQ432, AQ434.
Content
Qty
1
Bolt 5/16”-18UNC x5-3/4”
2
+ Lock Washer
2
Bolt 5/16”-18UNC x 2-1/2”
2
+ Lock Washer
2
1
19
VOLVO - GM V8 Small Block Center Riser
HGE 5384
Volvo Riser
Replaces:
Barr# .................... VO-20-855384
GLM# ................... 51510
Osco# .................. 56879
Sierra# ................. 18-1935-1
Volvo# .................. 855380, 855384
............................. 856879, 856891
3-3/4” (95 mm) exhaust outlet, 30° down angle riser.
Manifold
HGE 5804
Volvo GM V8 small block 305 - 350 cu. in. Models AQ and BB 200, 205,
211, 231, 225, 260, 271, 290, 311, 500, 501, 570, 571 and 572.
Content
Qty
1
Bolt 5/16”-18UNC x 5-1/8”
2
+ Flat Washer
Bolt 5/16”-18UNC x 1-3/4”
2
2
+ Flat Washer
2
1
VOLVO - 4 Cylinder Exhaust Bend
HGE 5599
Volvo 4-Cylinder Exhaust Bend
Replaces:
Barr # ................... VO-20-825599
Volvo # ................. 825599-4
Exhaust bend for Volvo 4-Cylinder log style manifold
Manifold
HGE 4532
Volvo 4-Cylinder Engines, Model AQ115 and 130
Content
Qty
HGE 56028 - Riser / End Gasket
1
Bolt 7/16”-14UNC x 1”
4
+ Lock Washer
4
Volvo Penta Water Connector
HGE 5528
The connector fits to following Elbows
Elbow
Volvo Elbow Penta Diesel # AQAD40, AQAD40B, TAMD40A, TAMD40B
20
Content
Qty
HGE 845527 - Gasket
1
M8 Hex Socket Head Cap
Screw x 18 mm
2
Volvo Penta Diesel Elbows
HGE 9963
Accessories - Engine Mounts
HGE 1421
Exhaust Elbow, Fits Volvo Engine
TAMD31P/L/M, TAMD41P/M/H.
Replaces:
DF-206
135 kg / 300 lbs
Replaces:
Volvo# 859963
HGE 1289
Exhaust Elbow, Fits Volvo Engine
TAMD300, TAMD43P, TAMD42WJ / K22
Replaces:
Volvo# 861289
HGE 1422
Replaces:
DF-216
135 kg / 300 lbs
HGE 5261
Exhaust Elbow, Fits Volvo Engine TAMD30,
TAMD40, TMD40A and AQD40A
Replaces:
Volvo# 845261, Sierra 18-4007
Accessories - Engine Mounts
Yanmar and Detroit Diesel Elbows
HGE 3520
Exhaust Elbow, Fits Yanmar 1GM, 2GM, 3GM,
1GM10, 2GM10, 3GM30,3HM, 3HM35F
Replaces:
Yanmar # 124070
HGE 1086
Replaces:
Barr #...................MC-29-861493
Sierra #................18-1910
MerCruiser #........861493A
HGE MerCruiser
3.0L Engine Thermostat Housing Kit
▪▪GM 3.0L/182 CID 4-Cylinder Engine
HGE 1493
Exhaust Elbow
Replaces:
Detroit Diesel 6-71-TI Engine Exhaust Elbow
Accessories - Water Fittings
HGE 0045
45° Fitting
Stainless steel 3/4” NPT to 1” hose fitting
HGE 0090
90° Fitting
Stainless steel 3/4” NPT to 1” hose fitting
21
Mounting kits
HGE 5804MK
HGE 3784MK
Content
Content
Qty
Qty
1
1
4
1
Flat Washer
4
Bolt 3/8”-16UNC x 5-1/8”
8
Lock Washer
4
Bolt 5/16”-18UNC x 1-3/4”
Bolt 3/8”-16UNC x 7-3/8”
1
2
Lock Washer
2
10
2
1
HGE 4354MK
Content
Qty
1
1
Bolt 3/8” -16UNC x 5-7/8”
4
Lock Washer
HGE 7114MK
Content
4
1
HGE 5384MK
Content
1
Bolt 5/16”-18UNC x 5-1/8”
2
Bolt 5/16”-18UNC x 1-3/4”
2
Lock Washer
1
1
8
Lock Washer
Qty
Qty
8
2
4
1
HGE 1-83MK
Content
Qty
1
1
Bolt 3/8”-16UNC x 3-1/2”
6
4
Lock Washer
10
3
HGE 9011MK
Content
Qty
1
1
8
4
Nut
12
Lock Washer
12
2
HGE 4035MK
Content
Qty
HGE 9746MK
Manifold gasket HGE 0000
1
1
1
Bolt 3/8”-16UNC x 4-3/8”
6
1
6
1/8" Brass Plug
2
2
10
1
Lock Washer
Content
Lock Washer
22
Qty
10
2
Gaskets
Dry Joint Spacer Kit
HGE Gaskets
Manifold Gaskets
▪▪For 7114, 7114-A
HGE 0000
▪▪For 1-81
HGE 10001
HGE Dry Joint Spacer
▪▪For 9011, 9011-A
▪▪MERCRUISER V8-4.3L, 5.0L, 5.7L and 6.2L "DRY JOINT"
spacers
▪▪Direct replacement 3" spacer kit for MerCruiser # 864929A 3
Kit includes a pair of spacers, mounting hardware and gaskets for
raw water cooled applications. Need to purchase additional block
off gaskets for closed cooled applications.
HGE 46820
▪▪For 9746-A
HGE 99757
HGE MC-20-864929A3
Riser Gaskets
▪▪ For 008 (closed) for 0082, 2018
HGE 10105
Accessories - Full Circle Damper
▪▪For 008 (open) for 0082
HGE 10107
HGE 7K2C
▪▪(open) for 7037
Replaces:
AS7K2C
HGE 35908
13.25” diameter for 26-spline
transmissions. Engines up to 430 cu. in.
▪▪(closed) for 4354, 4354-A
HGE 41811
▪▪ (restrictor) for 4354, 4354-A
Accessories
- Bell Housing / Flywheel Housing
HGE 41813
▪▪(open) for 3784
HGE 0100-000
HGE 43783
HGE 0082MK
Content
Qty
1
1
4
Nut
4
Lock Washer
4
Replaces:
Barr ..................MC-24-44187
Crusader ..........96938
MerCruiser .......814309A1
Pleasurecraft ...R142006
Volvo ................3857846-4
Supports Warner Transmission Engine Models
Engine
Chevrolet 6-Cyl
(in-line) 250, 292 C.I. with 14” flywheel
Chevrolet V6
200, 201, 229 and 262 C.I. with 14” flywheel
Chevrolet V8
265, 283, 305, 307, 327 and 350 C.I. with 14” flywheel
Chevrolet V8
348, 396, 409, 427 and 454C.I. with 14” flywheel.
23
HGE
HGE 0082
HGE 0252
HGE 1086
HGE 1184
HGE 1186
HGE 1289
HGE 1493
HGE 1-81
HGE 1-83
HGE 2018
HGE 2076
HGE 3320
HGE 3394
HGE 3520
HGE 3784
HGE 4035
HGE 4309
HGE 4354
HGE 4532
HGE 4591
HGE 4612
HGE 4870
HGE 4929PRK
HGE 5261
HGE 5384
HGE 5387
HGE 5528
HGE 5599
HGE 5735
HGE 5804
HGE 6041
HGE 6095
HGE 6351
HGE 7114
HGE 7234
HGE 7235
HGE 7656
HGE 7K2C
HGE 8481
HGE 8759
HGE 8870
HGE 9011
HGE 9011-A
HGE 9746
HGE 9963
HGE0100-000
24
18-1976-1
18-1912
18-4007
18-1935-1
18-1930-1
18-1931-1
4354
54870
56879
VO418
5805
18-1957-1
18-1957-1
18-1952-1
9011
9011
9745
18-2434
18-1960-1
8759
AS7-K2C
18-1971
18-1953-2
18-1950-1
18-1951-1
18-1848
18-1909-1
18-1986-1
50456
52374
856095s/s
6351
7114B2
7234B
7235B
18-1998-1
18-1997-1
18-1907
18-1975-1
18-1908
Description
Center Riser
End Cap Water Connector
Detroit Diesel DD 6-71T1 Elbow
GM SB Alternator Bracket
GM BB Alternator Bracket
KAMD300 TAMD43P Replace OEM #861289
GM 3.0L Thermostat Housing
Ford 302/351 SB V8 Center Riser Manifold
Chevy 305/350 SB V8 Center Riser Manifold
Indmar 30 Degree, 3" Elbow
Inboard Riser
3" Riser Block Single
OMC 2.3L Riser
Yanmar 1,2,3GM 124070-13520
Volvo/OMC Riser
Volvo/OMC Manifold
Dry Joint Elbow OEM #864612T01
Center Riser
Volvo AQ 115,130
Tall Dry Joint Elbow
4.3L Dry Joint Manifold OEM #864309T02
Rear End Cap Kits
Dry Joint 3" Spacer Kits
TAMD40 Replace OEM #845261
Volvo Riser
Volvo AQ120B,125A
Water Connector for HGE 5261, OEM #845528
AQ115 130 Riser
5.7L Dry Joint Manifold OEM #865735
Volvo Manifold
OMC 2.3L Manifold
VOLVO AQ170 Manifold
Log Riser
Center 5.7L Manifold
Log Style Port Side
Log Style Starboard
VOLVO V-6 SX Model
Full circle damper 13.25"
AQAD 41A Replace OEM #858481 Limited Supply
165 Manifold
VOLVO/OMC 3.0L Manifold
Big Blk. V8 Manifold
Alum.Big Blk. V8 Manifold
V6 Manifold
TAMD 31/41 Replace OEM #859962
Fit 14" Flywheel (26 Spline adaptions)
HGE Crossover Chart
Sierra
18-1999
18-4009
FL994
994
2018
2076
3320
CVAB
Osco
992
60252
Osco
2018
3320
VO418
5805
56879
7234B
7235B
9745
7114B2
9011
9011
8759
6351
4354
994
FL994
992
52374
50456
HGE
HGE 2018
HGE 3320
HGE 5387
HGE 5804
HGE 5384
HGE 7234
HGE 7235
HGE 9746
HGE 7114
HGE 9011
HGE 9011-A
HGE 8759
HGE 6351
HGE 4354
HGE 1-83
HGE 1-81
HGE 0082
HGE 4035
HGE 3784
Osco
992
994
2018
3320
4354
5805
6351
8759
9011
9011
9745
50456
52374
54870
56879
60252
7114B2
7234B
7235B
856095s/s
FL994
CVAB
18-1998-1
18-1935-1
18-4009
18-1953-2
18-1950-1
18-1951-1
Sierra
18-1999
18-1997-1
18-1907
18-1908
18-1976-1
18-1931-1
18-1971
18-1960-1
18-1957-1
18-1957-1
18-1952-1
18-1909-1
18-1986-1
HGE
HGE 0082
HGE 1-83
HGE 2018
HGE 3320
HGE 4354
HGE 5804
HGE 6351
HGE 8759
HGE 9011
HGE 9011-A
HGE 9746
HGE 3784
HGE 4035
HGE 4870
HGE 5384
HGE 0252
HGE 7114
HGE 7234
HGE 7235
HGE 6095
HGE 1-81
HGE 1184
Osco Crossover Chart
Sierra
18-1907
18-1908
18-1930-1
18-1931-1
18-1935-1
18-1950-1
18-1951-1
18-1952-1
18-1953-1
18-1957-1
18-1957-1
18-1960-1
18-1971
18-1976-1
18-1997-1
18-1998-1
18-1999
18-1986-1
18-1909-1
Sierra Crossover Chart
HGE Crossover Chart
56879
5805
52374
50456
CVAB
4354
6351
18-1935-1
18-1931-1
18-1986-1
18-1909-1
18-4007
18-2434
18-1953-2
18-1957-1
18-1957-1
18-1952-1
18-1975-1
18-1976-1
18-1971
18-1997-1
18-1998-1
18-1960-1
18-1950-1
18-1951-1
AS7-K2C
994
FL994
8759
7234B
7235B
7114B2
9011
9011
9745
18-1930-1
18-1848
Sierra
18-1912
18-4009
18-1999
18-1907
856095s/s
VO418
Osco
54870
60252
992
2018
OEM/Barr Crossover Chart
OEM/Barr
1-54870
1-60252
20-0082
20-0102
23518123 OEM
3857656 OEM
831521 OEM
855387-7
864309T02
864612T01
913394 OEM
986041 OEM
AS7K2C
CHV-1-83
FM-1-83
MC-1-58759
MC-1-77234
MC-1-77235
MC-1-865735
MC-1-87114
MC-1-89011
MC-1-89011
MC-1-99746
MC-20-12076
MC-20-44354
MC-20-76351
MC-20-864591
MC-20-864929A3
MC-24-44187
MC-27-47487
MC-27-93175
MC-29-861493
861289
845261
845528
858481
859962
124070-13520
OMC-1-3858870
OMC-1-914035
OMC-20-913784
VO-1-824532
VO-1-835804
VO-20-825599
VO-20-855384
HGE
HGE 4870
HGE 0252
HGE 0082
HGE 2018
HGE 1086
HGE 7656
HGE 6095
HGE 5387
HGE 4309
HGE 4612
HGE 3394
HGE 6041
HGE 7K2C
HGE 1-83
HGE 1-81
HGE 8759
HGE 7234
HGE 7235
HGE 5735
HGE 7114
HGE 9011
HGE 9011-A
HGE 9746
HGE 2076
HGE 4354
HGE 6351
HGE 4591
HGE 4929PRK
HGE0100-000
HGE 1186
HGE 1184
HGE 1493
HGE 1289
HGE 5261
HGE 5528
HGE 8481
HGE 9963
HGE 3520
HGE 8870
HGE 4035
HGE 3784
HGE 4532
HGE 5804
HGE 5599
HGE 5384
Crossover Charts
Installation Examples - Dry Joint Manifolds
Dry Joint Manifolds and Risers Gasket Application
Fresh Water Cooling Configuration
Raw Water Cooling Configuration
Raw Water Cooling Configuration
(Thermostat housing has no bypass)
25
Installation Examples - Log Style Manifolds
26
Installation Examples - Center Riser Manifold
27
Our business
Manifoldwarehouse.com is owned by H & H Marine Engine Service Ltd.,
a renowned company in Vancouver, BC, Canada since 1968, specializing in marine
engine exhaust systems.
We are an active retailer and re-marketer in selling high-quality and reliable marine
aftermarket products, with well-known names such as Barr Marine, Osco and HGE.
Our services cover the United States and Canada, with an expanding
distributorship in Europe.
What we believe
With many years of proven good services, starting from a small retail shop to an
international company today, we insist not only to maintain a low price policy, but
friendly and faithful supports to our customers and business partners.
We believe that all these are vital elements to our continuous success in the future.
Distributors and Dealers
HGE Marine Engine Products® is an internationally distributed product. We are
continually seeking new distributors and dealers worldwide. Our goal is to provide
the end user with the convenience of being able to purchase HGE products close
to where they go boating. If you represent an existing business and are interested
in becoming a dealer please contact [email protected]
Warranty
1. Three (3) year warranty for HGE products.
2. Six (6) months warranty for pump repairs (parts and labour).
3. One (1) year warranty from date of purchase for all non-HGE part(s).
4. This warranty does not extend to any labour cost of removal or re-installation for all parts.
5. This Warranty does not apply to the damage caused by the electrolysis process especially for the Aluminum products or extend to the products used in racing or high performance, or non-marine applications, or any engine alterations.
6. Warranty shall not apply if the product has been misused, abused, altered, neglected, or improperly installed, or damaged by ice expansion.
7. H&H reserves the right to improve its products through changes in design or materials without obligation to incorporate such changes in products of prior manufacture, and to
make changes at any time in design, materials, or parts of products without obligation or
liability to owners of products of prior manufacture.
Tel604.253.7721
Toll Free
800.663.0600
Fax604.253.2656
Toll Free
800.663.6790
[email protected]
w w w.w e s t e r n m a r i n e . c o m
28
2015

Catalogue Pdf - Western Marine Company

Transcription

Similar documents

2011 Catalog - HGE Marine Engine Products

mercury® mercruiser® exhaust system

Manifold Catalog ( version) Rev. 4-13-16

mercruiser - East Marine

Manifold - Firebird Marine

Mercruiser

6789 89

Tinsel Trading Company

OMC/Volvo Penta Catalog