The most complete and professional Range of Multiswitches
Transcription
The most complete and professional Range of Multiswitches
Multiswitches_TME_2009.qxd 26/02/2009 12:39 PÆgina 1 The most complete and professional Range of Multiswitches For all your system needs Goods of Spanish Origin European technology Multiswitches_TME_2009.qxd 26/02/2009 12:39 PÆgina 2 9 and 17 input cascade multiswitches new PRODUCT RANGE 9x8 Multimat 2 9x12 Multimat 2 9x16 Multimat 2 17x8 Multimat 2 17x12 Multimat 2 17x16 Multimat 2 ACCESSORIES TAP 9 Multimat 2 TAP 17 Multimat 2 Double F female 4 way Multimat 2 Double male 9 way Multimat 2 TYPICAL APPLICATION SECOND UNIT FIRST UNIT SAT E, F, G, H SAT A, B, C, D SECOND UNIT This professional range of cascadable multiswitches is the most flexible system of the market, allowing to increase the number of satellite inputs for any of the situations of reception. This new generation of multiswitches is stacked by sliding an additional multiswitch on top of the first unit already installed. Thereby, the headend can be expanded in depth with a minimum number of modifications and requiring same space for it. FIRST UNIT OUTPUT SATELLITES SAT A, B, C, D, E, F, G, H (mixing satellites from both first and second unites) The connection between receiver outputs to the loop-inputs is made by special coaxial leads featuring quick-type connectors for ease of installation. SAT A, B SAT C, D The Multimat 2 units are made of diecast. An ABS plastic cover protect the unit and connectors by means of plastic slides on both ends of the unit. Multimat 2 includes a range of accessories such as an easy low loss 9 and 17 way plug-in TAP for the main trunk line (1 dB) to allow big low loss IF-networks. TAPs are designed for direct connection to the Multimat 2 multiswitch without additional cables. The IF network can be designed using a minimum number of amplifiers for mantaining the BER all along the cascade system. TO ANOTHER TRUNK LINE SAT A, B, C, D SAT A, B, C, D SAT A, B, C, D Example of application for 9 input multiswitch units, increasing the number of satellites received from 2 to 4. EUROPEAN TECHNOLOGY MADE IN EUROPE 2 Multiswitches_TME_2009.qxd 26/02/2009 12:40 PÆgina 3 Cascade Multiswitches. Range of Product 9 input cascade multiswitches PRODUCT RANGE 7340 7340 9x9x8 Multiswitch 7382 9x9x12 Multiswitch 7341 9x9x16 Multiswitch 7342 9x9x16 + PSU Multiswitch 7344 9x9 Amplifier Colour coded inputs Flexible and easy to install High Input level 9 Input Amplifier with High output level Gain Regulation Flexible powering options TYPICAL APPLICATION 7342 Terr. 1 IN Vert. V-Low SAT A 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A 4 IN Hor. H-High SAT A V 2 IN Hor. H-Low SAT B 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B Terr. A 1 IN Vert. V-Low SAT A 1 Gain Regulation 14 - 21 13 - 18 13 - 17 21 SAT: 950 - 2400 MHz TER: 47- 862 MHz Ref. 7344 1 1 IN Vert. V-Low SAT B Slope Terr. Amplificador 9 x 9 Amplifier 9 x 9 B 2 IN Hor. H-Low SAT A C 3 IN Vert. V-High SAT A D Terr. Terr. 4 IN Hor. H-High SAT A E 1 IN Vert. V-Low SAT B 2 IN Hor. H-Low SAT B H G 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B 2 8 x 950 - 2400 MHz 1 x 47 - 862 MHz / 3 Slope 4 - 10 F 4 8 x 5 - 2400 MHz Canal de retorno Return Path Repartidor Conmutable 9 x 9 x 8 5 5 - 30 MHz 5 - 30 MHz 6 9 x 9 x 8 Splitter Multiswitch Ref. 7340 8 7 A B C 1 IN Vert. V-Low SAT A 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A Terr. D E F G 1 IN Vert. V-Low SAT B 2 IN Hor. H-Low SAT B 3 IN Vert. V-High SAT B 8 H This range of product consists of 8 input multiswitches featuring: 1 14 V SAT A (vertical polarisation; low band) 1 2 Terr. 4 IN Hor. H-High SAT A 4 IN Hor. H-High SAT B 3 4 5 6 8 x 950 - 2400 MHz 1 x 47 - 862 MHz / 7 8 16 x 5 - 2400 MHz 18 V SAT A (horizontal polarisation; low band) 9 Canal de retorno Return Path Repartidor Conmutable 9 x 9 x 16 5 - 30 MHz 5 - 30 MHz 10 9 x 9 x 16 Splitter Multiswitch Ref. 7341 11 14 V/22 KHz SAT A (vertical polarisation; high band) 12 14 13 15 A B C D E Terr. F G 16 H 8 18 V/22 KHz SAT A (horizontal polarisation; high band) 14 V SAT B(vertical polarisation; low band) 18 V SAT B (horizontal polarisation; low band) 14 V/22 KHz SAT B(vertical polarisation; high band) 18 V/22 KHz SAT B (horizontal polarisation; high band) 1 IN Vert. V-Low SAT A 1 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A Terr. 4 IN Hor. H-High SAT A 1 IN Vert. V-Low SAT B 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B 2 3 4 5 6 / 7 8 outputs in cascade and 16 outputs user. 2 IN Hor. H-Low SAT B 1 8 x 950 - 2400 MHz 1 x 47 - 862 MHz 8 16 x 5 - 2400 MHz 9 Canal de retorno Return Path Repartidor Conmutable 9 x 9 x 16 5 - 30 MHz 5 - 30 MHz 10 9 x 9 x 16 Splitter Multiswitch 11 12 Ref. 7342 13 14 15 16 They also feature an input for mixing the terrestrial signal that is distributed to all the outputs. It is possible to select, from any of the outputs, the desired input via DiSEqC switch and the appropriate combination of voltage 14/18 V and tone 0/22 KHz. A B C D Terr. E F G H V 16 Multiswitches_TME_2009.qxd 26/02/2009 12:40 PÆgina 4 Cascade Multiswitches. Range of Product 13 input cascade multiswitches PRODUCT RANGE 7351 7351 13x13x8 Multiswitch 7369 13x13x12 Multiswitch active terrestrial 7370 13x13x16 Multiswitch active terrestrial 7350 13x13 Amplifier This range of product consists of 12 input mul-tiswitches featuring: TYPICAL APPLICATION 14 V SAT A (vertical polarisation; low band) 18 V SAT A (horizontal polarisation; low band) 14/22 KHz SAT A (vertical polarisation; high band) 18 V/22 KHz SAT A (horizontal polarisation; high band) 14 V SAT B (vertical polarisation; low band) 18 V SAT B (horizontal polarisation; low band) 14/22 KHz SAT B (vertical polarisation; high band) 18 V/22 KHz SAT B (horizontal polarisation; high band) 1 14 V SAT C (vertical polarisation; low band) 18 V SAT C (horizontal polarisation; low band) 8 14/22 KHz SAT C (vertical polarisation; high band) 18 V/22 KHz SAT C (horizontal polarisation; high band) 13 outputs in cascade and 8 outputs user. 9 They also feature an input for mixing the terres-trial signal that is distributed to all the outputs. 16 It is possible to select, from any of the 8 outputs, the desired input via DiSEqC switch and the appropriate combination of voltage 14/18 V and tone 0/22 KHz. EUROPEAN TECHNOLOGY MADE IN EUROPE 4 Multiswitches_TME_2009.qxd 26/02/2009 12:41 PÆgina 5 Cascade Multiswitches. Range of Product 17 input cascade multiswitches PRODUCT RANGE 7323 7323 17x17x8 Multiswitch 7373 17x17x12 Multiswitch 7345 17x17x16 Multiswitch 7318 17x17 Amplifier 7317 17x17 Power Supply TYPICAL APPLICATION This range of product consists of 16 input mul-tiswitches, featuring: 14 V SAT A (vertical polarisation; low band) 18 V SAT A (horizontal polarisation; low band) 1 14/22 KHz SAT A (vertical polarisation; high band) POWER IN 1 IN Vert. V-Low SAT A 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A 1 IN Vert. V-Low SAT B 4 IN Hor. H-High SAT A Sat System I REC 1 2 IN Hor. H-Low SAT B 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B IN Terr. 47-862 MHz 1 IN Vert. V-Low SAT C 2 IN Hor. H-Low SAT C Sat System II 3 IN Vert. V-High SAT C 4 IN Hor. H-High SAT C 1 IN Vert. V-Low SAT D 2 IN Hor. H-Low SAT D 3 IN Vert. V-High SAT D 4 IN Hor. H-High SAT D Sat System IV Sat System III REC 2 REC 3 REC 4 REC 5 REC 6 16 x 950 - 2400 MHz 1 x 5 - 862 MHz REC 7 18 V/22 KHz SAT A (horizontal polarisation; high band) REC 8 16 x 5 - 2400 MHz REC 9 REC 10 Repartidor Conmutable 17 x 17 x 16 Ref. 7324 17 x 17 x 16 Splitter Multiswitch REC 11 14 V SAT B (vertical polarisation; low band) REC 12 REC 13 REC 14 Sat System I REC 15 Sat System II Sat System III 1 OUT Vert. V-Low SAT A 2 OUT Hor. H-Low SAT A 3 OUT Vert. V-High SAT A 4 OUT Hor. H-High SAT A 1 OUT Vert. V-Low SAT B 2 OUT Hor. H-Low SAT B 3 OUT Vert. V-High SAT B 4 OUT Hor. H-High SAT B 1 IN Vert. V-Low SAT A 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A 4 IN Hor. H-High SAT A 1 IN Vert. V-Low SAT B 2 IN Hor. H-Low SAT B 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B 18 V SAT B (horizontal polarisation; low band) OUT Terr. 47-862 MHz Sat System IV 1 OUT Vert. V-Low SAT C 2 OUT Hor. H-Low SAT C 3 OUT Vert. V-High SAT C 4 OUT Hor. H-High SAT C 1 OUT Vert. V-Low SAT D 2 OUT Hor. H-Low SAT D 3 OUT Vert. V-High SAT D 4 OUT Hor. H-High SAT D 1 IN Vert. V-Low SAT C 2 IN Hor. H-Low SAT C 3 IN Vert. V-High SAT C 4 IN Hor. H-High SAT C 1 IN Vert. V-Low SAT D 2 IN Hor. H-Low SAT D 3 IN Vert. V-High SAT D 4 IN Hor. H-High SAT D REC 16 16 14/22 KHz SAT B (vertical polarisation; high band) 18 V/22 KHz SAT B (horizontal polarisation; high band) 14 V SAT C (vertical polarisation; low band) 17 18 V SAT C (horizontal polarisation; low band) POWER IN Sat System I REC 1 IN Terr. 47-862 MHz Sat System II Sat System IV Sat System III REC 2 REC 3 REC 4 REC 5 REC 6 16 x 950 - 2400 MHz 1 x 5 - 862 MHz REC 7 14/22 KHz SATC (vertical polarisation; high band) REC 8 16 x 5 - 2400 MHz REC 9 REC 10 Repartidor Conmutable 17 x 17 x 16 Ref. 7324 17 x 17 x 16 Splitter Multiswitch REC 11 REC 12 REC 13 18 V/22 KHz SAT C (horizontal polarisation; high band) REC 14 Sat System I REC 15 1 OUT Vert. V-Low SAT A 2 OUT Hor. H-Low SAT A Sat System II 3 OUT Vert. V-High SAT A 4 OUT Hor. H-High SAT A 1 OUT Vert. V-Low SAT B 2 OUT Hor. H-Low SAT B Sat System III 3 OUT Vert. V-High SAT B 4 OUT Hor. H-High SAT B OUT Terr. 47-862 MHz 1 OUT Vert. V-Low SAT C Sat System IV 2 OUT Hor. H-Low SAT C 3 OUT Vert. V-High SAT C 2 IN Hor. H-Low SAT C 3 IN Vert. V-High SAT C 4 OUT Hor. H-High SAT C 1 OUT Vert. V-Low SAT D 2 OUT Hor. H-Low SAT D 3 OUT Vert. V-High SAT D 4 OUT Hor. H-High SAT D 4 IN Hor. H-High SAT C 1 IN Vert. V-Low SAT D 2 IN Hor. H-Low SAT D 3 IN Vert. V-High SAT D 4 IN Hor. H-High SAT D REC 16 32 14 V SAT D (vertical polarisation; low band) 18 V SAT D (horizontal polarisation; low band) 14/22 KHz SAT D (vertical polarisation; high band) 1 IN Vert. V-Low SAT A 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A 4 IN Hor. H-High SAT A 1 IN Vert. V-Low SAT B 2 IN Hor. H-Low SAT B 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B IN Terr. 1 IN Vert. V-Low SAT C Sat System III Sat System II Sat System I Sat System IV Slope SAT: 950 - 2400 MHz TER: 88 - 862 MHz 18 V/22 KHz SAT D (horizontal polarisation; high band) Gain 11-18 12-14 Gain Amplificador SMATV 17 x 17 17 x 17 SMATV Amplifier 1 OUT Vert. V-Low SAT A 2 OUT Hor. H-Low SAT A Ref. 7318 Sat System III Sat System II Sat System I POWER IN 3 OUT Vert. V-High SAT A 4 OUT Hor. H-High SAT A 1 OUT Vert. V-Low SAT B 2 OUT Hor. H-Low SAT B 3 OUT Vert. V-High SAT B 4 OUT Hor. H-High SAT B OUT Terr. 1 OUT Vert. V-Low SAT C 2 OUT Hor. H-Low SAT C Sat System IV 3 OUT Vert. V-High SAT C 4 OUT Hor. H-High SAT C 1 OUT Vert. V-Low SAT D 2 OUT Hor. H-Low SAT D 3 OUT Vert. V-High SAT D 4 OUT Hor. H-High SAT D 17 outputs in cascade and 8 outputs user. They also feature an input for mixing the terres-trial signal that is distributed to all the outputs. 33 POWER IN 1 IN Vert. V-Low SAT A 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A 4 IN Hor. H-High SAT A 1 IN Vert. V-Low SAT B 2 IN Hor. H-Low SAT B 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B IN Terr. 47-862 MHz 1 IN Vert. V-Low SAT C 2 IN Hor. H-Low SAT C 3 IN Vert. V-High SAT C 4 IN Hor. H-High SAT C 1 IN Vert. V-Low SAT D Sat System III Sat System II Sat System I 2 IN Hor. H-Low SAT D 3 IN Vert. V-High SAT D 4 IN Hor. H-High SAT D Sat System IV REC 2 REC 1 16 x 950 - 2400 MHz 1 x 5 - 862 MHz 8 x 5 - 2400 MHz REC 3 REC 4 Repartidor Conmutable 17 x 17 x 8 REC 5 It is possible to select, from any of the 8 outputs, the desired input via DiSEqC switch and the appropriate combination of voltage 14/18 V and tone 0/22 KHz 1 OUT Vert. V-Low SAT A 2 OUT Hor. H-Low SAT A 3 OUT Vert. V-High SAT A Sat System III Sat System II 4 OUT Hor. H-High SAT A 1 OUT Vert. V-Low SAT B 2 OUT Hor. H-Low SAT B 3 OUT Vert. V-High SAT B REC 6 Ref. 7323 17 x 17 x 8 Splitter Multiswitch Sat System I REC 7 4 OUT Hor. H-High SAT B OUT Terr. 47-862 MHz 1 OUT Vert. V-Low SAT C 2 OUT Hor. H-Low SAT C 3 OUT Vert. V-High SAT C Sat System IV 4 OUT Hor. H-High SAT C 1 OUT Vert. V-Low SAT D 2 OUT Hor. H-Low SAT D 3 OUT Vert. V-High SAT D 4 OUT Hor. H-High SAT D REC 8 40 Multiswitches_TME_2009.qxd 26/02/2009 12:41 PÆgina 6 Stand Alone Multiswitches.- Range of Product 9 and 13 inputs cascade multiswitches PRODUCT RANGE 7430 9 inputs 7438 9x8 Multiswitch 7430 9x12 Multiswitch 7439 9x16 Multiswitch 7379 9x24 Terminal multiswitch 7381 9x32 Terminal multiswitch 13 inputs 7358 13x8 Multiswitch, active terrestrial 7354 13x12 Multiswitch, active terrestrial 7360 13x16 Multiswitch, active terrestrial This range of product consists of 9 input multiswitches featuring: 14 V SAT A (vertical polarisation; low band) 18 V SAT A (horizontal polarisation; low band), 14 V/22 KHz SAT A (vertical polarisation; high band) 18 V/22 KHz SAT A (horizontal polarisation; high band) 14 V SAT B (vertical polarisation; low band) 18 V SAT B (horizontal polarisation; low band), 14 V/22 KHz SAT B (vertical polarisation; high band) 18 V/22 KHz SAT B (horizontal polarisation; high band) 9 outputs. This range of product consists of 9/13 input multiswitches featuring: TYPICAL APPLICATION 14 V SAT A (vertical polarisation; low band) 18 V SAT A (horizontal polarisation; low band), 14 V/22 KHz SAT A (vertical polarisation; high band) 18 V/22 KHz SAT A (horizontal polarisation; high band) 14 V SAT B (vertical polarisation; low band) 18 V SAT B (horizontal polarisation; low band), 14 V/22 KHz SAT B (vertical polarisation; high band) 18 V/22 KHz SAT B (horizontal polarisation; high band) 14 V SATC (vertical polarisation; low band) 1 IN Vert. V-Low SAT A 18 V SAT C (horizontal polarisation; low band) 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A 4 IN Hor. H-High SAT A 5 6 IN Vert. V-Low SAT B IN terr. 47-862 MHz Repartidor Conmutable 9 x 12 18 V/22 KHz SAT C (horizontal polarisation; high band) 9 IN Hor. H-High SAT B 12 x 5 - 2400 MHz Ref. 7430 1 8 IN Vert. V-High SAT B 8 x 950 - 2400 MHz 1 x 5 - 862 MHz 9 x 12 Splitter Multiswitch 14 V/22 KHz SAT C (vertical polarisation; high band) 7 IN Hor. H-Low SAT B 2 3 4 5 6 7 8 9 10 11 12 13 outputs. They also feature an input for mixing the terrestrial signal that is distributed 1 12 to all the outputs. It is possible to select, from any of the outputs, the desired input via switch DiSEqC and the appro-priate combination of voltage 14/18 V and tone 0/22 KHz. EUROPEAN TECHNOLOGY MADE IN EUROPE 6 Multiswitches_TME_2009.qxd 26/02/2009 12:42 PÆgina 7 7 Stand Alone Multiswitches.- Range of Product 17 input stand alone PRODUCT RANGE 7311 7311 17x8 Multiswitch 7312 17x16 Multiswitch 7335 17x16 Multiswitch 7375 17x24 terminal Multiswitch 7376 17x32 terminal Multiswitch ACCESSORIES 7321 PSU 12 Vdc - 1.6 A 7328 PSU 12 Vdc - 0.3 A 4036 4038 4037 4036 8 way earth bar 4037 12 way earth bar 4038 16 way earth bar Range of 16 inputs multiswitchwithes featuring: 14 V SAT A (vertical polarisation; low band), 18 V SAT A (h. polarisation; lowband), 14 V/22 KHz SAT A (vertical polarisation; high band), 18 V/22 KHz SAT A (horizontal polarisation; high band), 14 V SAT B (vertical polarisation; low band) 18 V SAT B (horizontal polarisation; low band) 14 V/22 KHz SAT B (vertical. polarisation; high band) 18 V/22 KHz SAT B (horizontal polarisation; high band) 14 V SAT C (vertical polarisation; low band), 18 V SAT C (horizontal polarisation; low band) 14 V/22 KHz SAT C (vertical polarisation; high band) 18 V/22 KHz SAT C (horizontal polarisation; high band) 14 V SAT D (vertical polarisation; low band) 18 V SAT D (horizontal polarisation; low band) 14 V/22KHz SAT D (vertical polarisation; high band) 18 V/22 KHz SAT D (horizontal polarisation; high band) 16 outputs TYPICAL APPLICATION 1 POWER IN REC 1 1 IN Vert. V-Low SAT A 2 IN Hor. H-Low SAT A 3 IN Vert. V-High SAT A Sat System I 4 IN Hor. H-High SAT A 1 IN Vert. V-Low SAT B 2 IN Hor. H-Low SAT B 3 IN Vert. V-High SAT B 4 IN Hor. H-High SAT B IN Terr. 47-862 MHz 1 IN Vert. V-Low SAT C 2 IN Hor. H-Low SAT C 16 x 950 - 2400 MHz 1 x 5 - 862 MHz REC 3 3 IN Vert. V-High SAT C Sat System III Sat System II 4 IN Hor. H-High SAT C 1 IN Vert. V-Low SAT D 2 IN Hor. H-Low SAT D 3 IN Vert. V-High SAT D Sat System IV 4 IN Hor. H-High SAT D REC 2 REC 4 8 x 5 - 2400 MHz REC 5 REC 6 Repartidor Conmutable 17 x 8 They also feature an input for mixing the terrestrial signal that is distributed to all the outputs. It is possible to select, from anyof the 16 outputs, the desired input via DiSEqC switch and the appropriate combination of voltage 14/18 V and tone 0/22 KHz. 17 x 8 Splitter Multiswitch REC 7 Ref. 7311 REC 8 12 Multiswitches_TME_2009.qxd 26/02/2009 12:42 PÆgina 8 Televés Contact Details TELEVÉS MIDDLE EAST FZE P.O. Box 17199 JEBEL ALI FREE ZONE DUBAI United Arab Emirates Tel. 9714 88 343 44 / Fax. 9714 88 346 44 [email protected] www.televes.com The tecnical specifications can be modified without warning The products of Televes correspond to EN-500083-2/A1 and EN-60065 and CE norms. www.televes.com