Colpak Caltlog

Transcription

Colpak Caltlog

a
Colpak
Chromatography Consumables
www.colpak.co.in
2
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
About Us
Established in 1964, we have been in the field of Glass Tube Engineering making glass
syringes from 1/4ml to 100ml. Over the years we have made a number of products in
glass tube engineering like Test Tubes, Heamometers, and our prestigious product
Sterile Glass Prefillable Syringes made at our plant in Alandi, Pune where we have
experience in handling a combination of products such as glass, elastomers (rubber) &
plastic.
Having this experience, we have now diversified into manufacturing of Chromatography
Consumables which use the same product knowledge at our plant on the outskirts of
Mumbai city. With experience in providing quality material since nearly over 5 decades,
we offer the laboratory market with world class products.
We look forward to working with you for your closure technique needs in the laboratory.
Kirit Shandilya
[Chairman]
Contents
Page
Products
Test Tube
ND11 Crimp Neck Vials
3
ND9 Short Thread Vials
4
Shell Vials
5
Vials Rack
5
ND11 Snap Ring Vials
6
ND8 Screw Neck Vials
6
ND13 Screw Neck Vials
7
ND20 Headspace Vials
7
Micro Volume Inserts
8
16
Technical Specification
9
Crimp Neck
Glass Syringes
17
Correct Septa Selection
11
SPE Column Blanks
17
Compatibility Chart
12
Lab Refregerator
19
Cross Reference Chart
14
Pipettes
19
Product Index
15
Chromatography Division of Top Syringe Mfg. Co. Pvt. Ltd.; Mumbai, India.
ISO 9001:2008 & ISO 13485 Certified
3
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
ND11 Crimp Neck Vials 12 x 32mm
Why Select 11mm Crimp Neck Vials?
Crimp caps provide the tightest seal, reducing the chance of sample evaporation. The 12x32mm crimp
vials and 11mm aluminium crimp caps are economical and easy to use with crimping tools.
11mm Crimp Neck Vials
Catalog No.
Packing
Description
TC-110 A
12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening
100
TC-110 B
12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening, Label + Filling Lines
100
TC-110 C
12 x 32mm, Amber Glass, Wide Opening, USP Type 1
100
TC-110 D
12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening, Label + Filling lines, USP Type 1
100
TC-110 AER
12 x 32mm, Clear Glass, Wide Opening, USP Type 1 Expansion 33
100
TC-110 BER
12 x 32mm, Clear Glass, Wide Opening, Label + Filling lines, USP Type 1 Expansion 33
100
11mm Septas
Catalog No.
Packing
Description
TC-112 A
Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-112 B
PTFE Red / Silicone White / PTFE Red Septa, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-112 C
Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-112 D
Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-112 E
Pre-Slit Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-112 F
Pre-Slit Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-112 G
Pre-Slit Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
11mm Aluminium Septas & Caps
Catalog No.
Packing
Description
TC-117
Aluminium Cap 5.5mm Center Hole
100
TC-117 A
Aluminium Cap Clear 5.5mm Center Hole Silicone White / PTFE Red
100
TC-117 B
Aluminium Cap Clear 5.5mm Center Hole PTFE Red / Silicone White / PTFE Red
100
TC-117 C
Aluminium Cap Clear 5.5mm Center Hole Silicone Red / PTFE White
100
TC-117 F
Aluminium Cap Clear 5.5mm Center Hole Pre-Slit Silicone Red / PTFE White
100
TC-117 G
Aluminium Cap Clear 5.5mm Center Hole Pre-Slit Silicone White /PTFE Red
100
* Blue, Red, Green & Gold Caps Available on request. #For correct vial crimping visit page no 9
TC-110 A
TC-110 B
TC-110 D
11mm Aluminum
Septas & Caps
TC 60 A
TC 60 B
TC 60 C
TC 60 D
Micro-Inserts for 11mm Crimp Neck Vials
Catalog No.
Packing
Description
Packing
1000
TC-60 A
0.2ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrol Class, Flat Bottom, Fill Vol. 0.35
TC-60 B
0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrol Class, Conical, 12mm Top, Fill Vol. 0.30 (Coming Soon)
1000
TC-60 C
0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrol Class, Conical, 15mm Top, Fill Vol. 0.25 (Coming Soon)
1000
TC-60 D
0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass, 1st Hydrol Class, Mandrel Point with assembled Plastic Spring,
Fill Vol. 0.20 (Coming Soon)
1000
4
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
ND9 Short Screw Thread Vials 12 x 32mm
Why Select 9mm Short Screw Thread Vials?
9mm screw thread vials have a 9-425 GPI thread and the closure is dimensionally equivalent to 11mm
crimp cap vials.This means that they can be used in any autosampler that uses 11mm crimp cap vials.
9mm screw caps have an advantage over 11mm crimp caps because 9mm screw caps can easily be
applied and removed by hand and they can be reused.
9mm Short Screw Thread Vials, Wide Opening
Catalog No.
Packing
Description
TC-90 A
100
TC-90 B
100
TC-90 C
12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening
100
TC-90 D
12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening , Label + Filling Lines USP Type 1
100
TC-90 AER
12 x 32mm, Clear Glass, Wide Opening,l, USP Type 1 Expansion 33
100
TC-90 BER
12 x 32mm, Clear Glass, Wide Opening ,Label + Filling lines, USP Type 1 Expansion 33
100
TC-91 ERB
12 x 32mm, PP 9mm Micro-Vial, Transparent
100
9mm Short Screw Thread Septas & Caps
Catalog No.
Packing
Description
TC-92 A
Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-92 B
PTFE Red / Silicone White / PTFE red, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-92 C
Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-92 D
Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-92 E
Pre-Slit Silicon White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-92 F
Pre-Slit Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-92 G
Pre-Slit Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C
100
TC-94 B
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole
100
TC-94 BA
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Red
100
TC-94 BB
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole PTFE Red / Silicone White / PTFE Red
100
TC-94 BC
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White
100
TC-94 BD
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue
100
TC-94 BE
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue with Pre-Slit
100
TC-94 BF
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White with Pre-Slit
100
TC-94 BG
PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White /PTFE Red with Pre-Slit
100
* Transparent, Red, Green, Black & Yellow Caps Available on request.
TC-90 A
TC-90 B
TC-90 D
#For correct vial sealing screw cap visit page no 9
9mm Short Screw
Threads Septas & Caps
TC-91 ERB
5
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
9mm Short Screw Thread Septas & Caps
Catalog No.
Packing
Description
TC-95 B
PP Blue Short Screw Thread Cap, 6mm Closed Top
100
TC-95 BA
PP Blue Short Screw Thread Cap, 6mm Closed Top, Silicone White / PTFE Red
100
TC-96 B
PP Blue Short Screw Thread Cap, 6mm Center Hole
100
TC-96 BA
PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Red
100
TC-96 BB
PP Blue Short Screw Thread Cap, 6mm Center Hole PTFE Red / Silicone White / PTFE Red
100
TC-96 BC
PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White
100
TC-96 BD
PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue
100
TC-96 BE
PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue with Pre-Slit
100
TC-96 BF
PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White with Pre-Slit
100
TC-96 BG
PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Red with Pre-Slit
100
* Transparent, Red, Green, Black & Yellow Caps Available on request. #For correct vial sealing screw cap visit page no 9
Micro-Inserts for 9mm Short Screw Thread Vials
Catalog No.
Packing
Description
Packing
1000
TC-60 A
0.2ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Flat Bottom, Fill Vol. 0.35
TC-60 B
0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Conical, 12mm Top, Fill Vol. 0.30(Coming Soon)
1000
TC-60 C
0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Conical, 15mm Top, Fill Vol. 0.25(Coming Soon)
1000
TC-60 D
0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass, 1st Hydrolic Glass, Mandrel Point with assembled Plastic Spring,
Fill Vol. 0.20(Coming Soon)
1000
TC 60 A
TC 60 B
TC 60 C
TC 60 D
Shell Vials
9mm Short Screw
Threads Septas & Caps
Why Select Shell Vials?
Shell vials feature thicker walls for safer sample handling. They are compatible with Waters WISP™ 48
and 96 style autosamplers. All shell vials are supplied with polyethylene plug closures – their tear-away
design ensures excellent penetration and ventilation during sampling.
1ml Shell Vials Micro-Inserts
Catalog No.
Description
Packing
Packing
TC-712
40mm x 8.2mm, 1ml Shell Vials, Clear Glass, 1st Hydrol Class,
8mm PE-Plug, Soft without insertion barrier for Micro-Insert
TC-712 A
40mm x 8.2mm, 1ml Shell Vial, Clear Glass, 1st Hydrol Class
1000
TC-712 B
8mm PE-Plug, Transparent (Without Insertion Barrier)
1000
1000
Vials Rack
Catalog No.
Description
Packing
TC-70
PP Vial Rack 182 x 92 x 16mm, 50 cavities with 12mm diameter
1
TC-712
TC 70
6
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
ND11 Snap Ring Vials 12 x 32mm
Why Select 11mm Snap Ring Vials?
11mm snap caps provide a secure seal that minimises evaporation, even with volatile samples. Snap caps
are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible
click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be
closed with either snap caps or crimp caps.
11mm Snap Ring Vials
Catalog No.
Packing
Description
TC-110 SA
100
TC-110 SB
100
TC-110 SC
12 x 32mm, Amber Glass, Wide Opening, USP Type 1
100
TC-110 SD
12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening, Label + Filling Lines
100
11mm Snap Ring Seals
Catalog No.
Packing
Description
TC-110 SG
PP Clear 6mm Snap Ring Cap, Silicone White / PTFE Red
100
TC-110 SH
PP Clear 6mm Snap Ring Cap, Pre-Slit Silicone White / PTFE Red
100
TC-110 SI
PP Clear 6mm Snap Ring Closed Cap with Star Membrane
100
TC-110 SA
TC-110 SB
TC-110 SD
11mm Snap
TC-80 A
Ring Septas & Caps
TC-80 B
8mm Screw
Septas & Caps
ND8 Screw Neck Vials 12 x 32mm
Why Select 8mm Screw Neck Vials?
8mm (8-425) screw neck vials are the original smaller opening autosampler vials. They are designed to
work in a variety of autosamplers requiring narrow neck vials.
8mm Screw Neck Vials
Catalog No.
Packing
Description
TC-80 A
12 x 32mm, 1st Hydrol Class Clear Glass, Small Opening
100
TC-80 B
12 x 32mm,1st Hydrol Class Clear Glass, Small Opening ,Label + Filling Lines
100
TC-80 C
12 x 32mm, Amber Glass, Small Opening , USP Type 1
100
TC-80 D
12 x 32mm, Amber Glass, Small Opening, Label + Filling Lines, USP Type 1
100
PP 8mm Screw Seals
Catalog No.
Packing
Description
TC-84 K
PP 8mm Black Knurled Screw Cap, 5.5mm Center Hole Cap
100
TC-84 KA
PP 8mm Black Knurled Screw Cap, 5.5mm Center Hole Silicone White / PTFE Red, Thickness 1.5mm,
Temperature Resistant -60°C to 200°C
100
* Transparent, Red, Green & Yellow Caps Available on request. #For correct vial sealing screw cap visit page no 9
7
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
ND13 Screw Neck Vials 15 x 45mm
Why Select 13mm Screw Neck Vials?
13mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. They are used by the Waters
48-position autosampler and many others.
13mm Screw Neck Vials, Wide Opening
Catalog No.
Packing
Description
TC-130 A
4ml Clear Glass, 15 x 45mm, 1st Hydrol Class
100
TC-130 B
4ml Clear Glass, 15 x 45mm, 1st Hydrol Class, Label + Filling Lines
100
TC-130 C
4ml Amber Glass 15 x 45mm, 1st Hydrol Class
100
TC-130 D
4ml Amber Glass 15 x 45mm, 1st Hydrol Class, Label + Filling lines
100
13mm Screw Seals
Catalog No.
TC-136 KA
Packing
Description
PP Black Screw Cap 8.5mm Center Hole, Silicone White / PTFE Red, 1.5mm Thickness, Temperature
Resistant -60°C to 200°C
100
20mm Aluminum
Septas & Caps
13mm Screw
Septas & Caps
TC-130 A
TC-130 B
TC-130 D
ND20 Headspace Vials
20mm Magnetic
Aluminum Septas & Cap TC- 200
TC- 200 A
Why Select Headspace Vials?
Colpak high quality headspace vials have a bevelled neck for a secure seal, uniform glass thickness for even
heat distribution and a stable, strong design for ease of use. They are available with rounded or flat bottom
profiles for accurate instrument compatibility. Use with the 20mm headspace caps, septas and seals.
20mm Headspace Vials
Catalog No.
Description
Packing
TC-200
22.5 x 46mm, 10ml Crimp Headspace Clear Vial, Flat Bottom
100
TC-200 A
22.5 x 75.5mm 20ml Crimp Headspace Clear Vial, Flat Bottom
100
20mm Septas & Caps
Catalog No.
Description
Packing
TC-202 H
Silicone White / PTFE Beige, Thickness 3mm, Temperature Resistant -60°C to 200°C
100
TC-202 J
Silicone White / PTFE White, Thickness 3mm, Temperature Resistant -60°C to 200°C
100
TC-204
10mm Center Hole, Blue Crimp Top, Magnetic Aluminum Cap
100
TC-206
10mm Center Hole, Crimp Top, Aluminum Cap
100
TC-206 H
10mm Center Hole, Crimp Top, Aluminium Cap with Silicone White / PTFE Beige
100
TC-206 J
10mm Center Hole, Crimp Top, Aluminum Cap with Silicone White / PTFE White
100
8
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Limited Volume Inserts
Why Select Limited volume Inserts?
Limited volume inserts are an economical solution in sample analysis to reduce the use and waste of
solvents and small samples. For optimum instrument performance and accurate test results, use the
guides below to ensure that the correct insert is used with the appropriate autosampler vial. The Insert is
neckless and always has to be used within a vial. The diameter of the Insert depends on the size of the vial
opening. Inserts reduces the volume, so that the needle is capable of picking up even smallest sample
quantities. The larger the top of an insert, the more the volume can be reduce.
Bottom Type
Insert Selection Guide
Solvent
Compatibility
Glass is most commonly used for vial inserts.
Polypropylene may be necessary when using pH
sensitive samples.
Mandrel point inserts provide the smallest dead
volume so are suitable when minimising sample loss
Targeted Dead
is important. Conical bottom inserts provide suffi cient
Volume
sample extraction for Most applications.
Price
Flat
Conical
Catalog No.
Flat bottom inserts are the cheapest and may be a
viable option for limited sampling. Mandrel point vial
inserts are the most expensive but they minimise
sample loss and provide excellent Injection accuracy.
Mandrel
Description
Packing
8mm
Screw
9mm
Screw
11mm
Crimp
11mm
Snap
TC-50 A
0.2ml Micro-Insert, 31 x 5mm, Clear Glass, 1st Hydrol Class,
Flat Bottom, Fill Vol. 0.30
1000
ü
TC-50 B
0.1ml Micro-Insert, 31 x 5mm, Clear Glass,1st Hydrol Class,
Conical, 9mm Top, Fill Vol. 0.20 (Coming Soon)
1000
ü
TC-50 C
1000
ü
TC-50 D
Mandrel Point with assembled Plastic Spring,Fill Vol. 0.15
(Coming Soon)
1000
ü
TC-60 A
Flat Bottom, Fill Vol. 0.35
1000
ü
ü
ü
TC-60 B
1000
ü
ü
ü
TC-60 C
1000
ü
ü
ü
TC-60 D
0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass,1st Hydrol Class,
Mandrel Point with assembled Plastic Spring, Fill Vol. 0.20
(Coming Soon)
1000
ü
ü
ü
TC 50 A
TC 50 B
TC 50 C
TC 50 D
TC 60 A
TC 60 B
TC 60 C
TC 60 D
9
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Technical Specifications
Screw Thread Finish
GPI refers to the "Glass Packaging Institute"
The GPI is responsible for establishing and issuing standards for the types and finishes produced by American glass manufacturers.
For example, and 8-425 neck finish is approximately 8 mm in diameter across the outside of the threads. The 425 represents the
finish (style of thread).
Typical GPI finishes found in the chromatography field are as follows:
8-425 Closure - Varian, Shimadzu 10-425 Closure - Waters Alliance 2690 13-425 Closure - Waters 48 position WISP™, Shimadzu.
Note: The 9 mm thread finish does not appear in the GPI finishes. It is not a standard finish. The 9 mm closure and vial are used
with Hewlett-Packard equipment.
A
B
ID
Standard Screw Thread Finish
C
"A" = Outer diameter of seal
"B" =Inside diameter of the thread
D
"ID" = Inside diameter
"C" =Start of thread
"D" =Distance from top of finish to shoulder for closure clearance
Screw Neck
Septum Distortion
Sealing Screw Cap
It is important not to over-tighten screw caps
When using any type of screw cap vial, care should be taken to ensure
the cap is screwed on securely without being Unnecessarily overtightened.
Over-tightening can cause various problems:
ŸThe septum may distort as it is placed under pressure and twisted
(see diagram)
ŸSeptum resealing can be adversely affected
ŸCoring may occur upon injection
ŸThe cap may unscrew itself – this can result in sample evaporation
Over-Tightened Screw Cap
A
B
Standard Crimp Seal Finish
ID
"A" = Outer diameter of seal
C
"B" = Crimp tool and robotic arm clearance
D
"ID" = Inside diameter
"C" = Crimp seal thickness
"D" = Distance from top to shoulder for crimp & robotic arm clearance
Crimp Neck
Correct Vial Crimping
Target Hole
Cap
Seal
Achieve accurate results with correctly
Crimped vials
Collar/Head
Skirt
Tuck-Under
Neck
Shoulder
Wall
Correctly Crimped Vial
A correctly crimped vial is neither over-crimped
nor under-crimped. Over-crimping may cause
coring or poor septum resealing, while undercrimping can cause evaporation problems.
With proper adjustment of the vial crimpers,
Perfect crimping can be achieved every time.
When the vial is crimped perfectly, the cap
should not be able to rotate and the septum
should appear smooth and level.
Over-Crimped
Under-Crimped
10
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Technical Specifications
Glass Technical Information
Terminology:
Borosilicate :A glass that is high in silicate and having at least 5% boron oxide.
Linear Coefficient of Expansion: Fractional change in length of glass per degree change in temperature. Strain Point Maximum temperature to which glass should be heated during use.
Types of Glass:
USP Type - Pharmaceutical glass containers can be classified as USP Type I, II, III or NP.
Type I: Borosilicate glass represents the least reactive glass. Type I glass has the least pH shift. (Lowest leaching
characteristics), Coefficient of Expansion = 33 or 51 for Clear and 51 for Amber.
Type II: De-alkalized soda lime glass with higher levels of sodium hydroxide and calcium oxide.
Type III: Soda lime glass - cannot be autoclaved.
Type NP: General purpose soda-lime glass used where chemical durability and heat shock are not factors. Coefficient of
Expansion=92
Glossary
1 PP
: Polypropylene
5 GC
: Gas Chromatography
2 PE
: Polyethylene
6 HPLC
: High Pressure Liquid Chromatography
3 PTFE
: Poly Tetra Flouro Ethylene
7 1st Hydrol Class : Type 1 glass
4 ND
: Nominal Diameter
Glass Properties
Colour
Clear
Clear
Amber
Linear Coefficient of Expansion
33
51
51
Strain Point (Degrees Celsius)
515
535
535
USP Class Type
Type 1
Type 1
Type 1
Light Protection
No
No
Yes
Type 33 is clear borosilicate glass referred to as Type 1, Class
A-33 Expansion
Type 51 is clear or amber borosilicate glass referred
to as Type 1, Class B-51 Expansion
This is the lowest coefficient of expansion
Comparatively low coefficient of expansion
Highly resistant to chemical attack
All round good chemicalcompatibility
Total arsenic and antimony oxides are less than 0.05%
Good resistance to heat shock
Free of the elements of the calcium, magnesium and zinc group of heavy metals
Higher metal content
Not available as amber glass
All amber vials are made from Type 1, Class B-51 expansion glass
Plastic Properties
Amber glass is to be used for a light sensitive samples; however, if
left out in daylight for extended periods of time the amber coloring
will fade and become less efficient
LDPE
HDPE
PP
PMP
PS
80°C /
176°F
120°C /
248°F
135°C /
275°F
175°C /
347°F
90°C /
194°F
Translucent
Translucent
Translucent
Clear
Clear
Sterilization Autoclaving
No
No
Yes
Yes
No
Disinfectants
Yes
Yes
Yes
Yes
No
No
Yes
Type of Plastic
Maximum. use
Temperature C/F
Transparency
Dry Heat
No
No
No
Yes
Radiatioin
Yes
Yes
No
No
Specification Gravity
0.92
0.95
0.90
0.83
1.05
Flexibility
Good
Rigid
Rigid
Rigid
Rigid
11
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Selecting the correct SEPTA
The selection of correct septa depends on the application. Almost all septa are laminated on one side with PTFE, which
has a high chemical resistance and forms an inert barrier between samples and carrier material of the septa. The
carrier materials have different physical and chemical properties, such as temperature resistance, reseal-ability
properties, cleanliness, hardness, thickness, etc.
The individual conditions of the user’s application aim at the specific characteristics of the
carrier material, e.g.:
Septa Compatibility Post Injection
Poor
:Post injection this septa will exhibit sample loss and deterioration
Fair
:Post injection this septa will maintain integrity for a limited period of time with some deterioration
Good
:Post injection this septa will maintain integrity for an extended period of time minor deterioration
Excellent :Post injection this septa will maintain integrity for high percentage of analytical sample analysis with absolute
minimal deterioration
PTFE
Exceptional solvent resistance with superior chemical inertness
Only suitable for single injection use – not recommended for sample storage before or after injection
Not resealable
The most economical septa
Maximum service temperature 260°C
PTFE / Silicone
Excellent resealing capabilities – highly recommended for multiple injections and sample storage
Autoclavable and excellent resistance to coring
PTFE chemical resistance until pierced then the septa will have the compatibility of silicone
Temperature range -40°C to 200°C, For thin Fragile needle
Pre-Slit PTFE / Silicone
Reduces the possibility of coring with blunt tipped needles or for applications using a thin gauge needle
Used to prevent vacuum from forming inside the vial
Temperature range -40°C to 200°C, For Blunt, thick needle
PTFE / Silicone / PTFE
Recommended for multiple injections due to above average resealing capabilities
Autoclavable and excellent resistance to coring
Recommended for demanding applications such as internal standards, trace analysis or applications where there will be a long time
between injections
Temperature range -40°C to 200°C
PTFE / Red Rubber
The most economical septa used in routine analysis
Easy to pierce with moderate resealability
PTFE chemical resistance until pierced then the septa will have the compatibility of rubber
Not recommended when retaining samples for further analysis or for multiple injections
Temperature range -40°C to 110°C
Rubber
Silicone
Acids
Chemical
Good
Excellent
Fair
Poor
Acids, diluted
Good
Good
Fair
Poor
Acetone
Good
Poor
Good
Poor
Alcohols
Fair
Good
Good
-
Benzene
Poor
Fair
Poor
Good
Chloroform
Poor
Good
Fair
Good
Dioxane
Fair
Good
Poor
Poor
Ethyl Acetate
Good
Excellent
Fair
Poor
Ethyl Alcohol
Excellent
Good
Fair
-
Halogenated Hydrocarbons
Poor
Excellent
Poor
-
Hexane
Poor
Good
Poor
-
Ketones
Excellent
Fair
Good
-
Methanol
Good
Excellent
Good
Poor
Pentane
Poor
Good
Poor
-
Sulphuric Acid
Fair
Good
Poor
Good
Sufactants
Excellent
Excellent
Fair
-
Toluene
Fair
Good
Poor
Excellent
Water
Excellent
Excellent
Good
Good
Butyl Rubber
Viton
12
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Agilent / HP
1050
Agilent / HP
1090
Agilent / HP
1100
Agilent / HP
6850
Agilent / HP
7670 A
Agilent / HP
7671 A
Agilent / HP
7673 Series
Agilent / HP
7683
Agilent / HP
7694 Headspace
Agilent / HP
Alcott
Alcott
Alcott
Alltech
Alltech
Beckman
Beckman
Beckman
Beckman
Beckman
Beckman
Bruke
Carlo Erba/Fison
Carlo Erba/Fison
Carlo Erba/Fison
Carlo Erba/Fison
Dan
Dan
Dan
Dan
Dionex/Gynkote
Dionex/Gynkote
Dionex/Gynkote
Dynatech/Precisio
Dynatech/Precisio
Gerstel
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
Gilson
HTA
HTA
HTA
Jasc
Kontro
Kontro
LDC
Leap Technologie
Leap Technologie
Leap Technologie
Leap Technologie
Leap Technologie
Leap Technologie
Leap Technologie
Merck/Hitach
Merck/Hitach
Merck/Hitach
Merck/Hitach
Merck/Hitach
Merck/Hitach
All Other Model
718 AL
719 D
738
570
580
501
502
507
Marthon
Promis
Triathlon
LC 51
42 Vial Tray
AS 105
AS 800 / 8000
HS 850
ALS 39.80
ALS 86.80
HS 39.50
HS 86.50
Gina
ASI 100(2ml Tray)
AS 509(2ml Tray)
42 Vail Tray
LC 2000
MS 2
201
202
221
222
231/231XL
232/232XL
233XL
234
235
401
402
ASPEC
All Other Model
HT250D/HT280T
HT300A/HT310A
HT300L
All Models
MSI 660
All Other Model
Marathon
A200LC
CTC DI PAL
CTC Combi PAL
CTC A200E PAL
CTC HTS PAL
CTC LC Mini PAL
CTC A200S PAL
AS-2000
AS-4000
L7200
L725
L8800
LaChrom
TC-110 A
TC-110 B
TC-110 C
TC-110 D
TC-110 AER
TC-110 BER
TC-110 SA
TC-110 SB
TC-110 SC
TC-110 SD
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
l Vi
TC-200
TC-200 A
She
l
eN
pac
TC-130 A
TC-130 B
TC-130 C
TC-130 D
als
D2
0
hre
ad
cre
He
a ds
TC-90 A TC-90 B
TC-90 C TC-90 D
TC-90 AER
TC-90 BER
TC-91 ERB
Sho
rt S
Ri n
gN
D1
Sna
p
TC-80 A
TC-80 B
TC-80 C
TC-80 D
wT
1
11
ND
pN
e ck
Crim
wT
cre
Sho
rt S
wN
e ck
Scr
e
Colpak
Autosampler
Compatibility
Chart
ND
8
hre
ad
ND
9
ND
1
3
Colpaka
TC-712
TC-712 A
TC-712 B
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
13
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Perkin Elmer
Perkin Elmer
Al-1
Auto System
Perkin Elmer
Integral 4000
Perkin Elmer
ISS 100
Perkin Elmer
ISS 200
Perkin Elmer
LC600 42 Vial Tray
Perkin Elmer
Series 200
Pharmacia
LKB 2157-010
Shimadzu
AOC-14
Shimadzu
AOC-1400
Shimadzu
AOC-17
Shimadzu
AOC-20i
Shimadzu
AOC-20s
Shimadzu
AOC-8B
Shimadzu
LC-10A
Shimadzu
SIL-2AS
Shimadzu
SIL-6B
Shimadzu
SIL-9A
Shimadzu
SIL-10A
Shimadzu
SIL-HTa
Shimadzu
SIL-HTc
Marathon
Spark Holland
Spark Holland
Midas
Spark Holland
Promis
SPH 125
Spark Holland
Spark Holland
Triathlon
8875
Spectra-Physics/TS
Spectra-Physics/TS
8880
Spectra-Physics/TS
AS100/ 1000
AS300/ 3000
Spectra-Physics/TS
Spectra-Physics/TS
Spectra-System
Thermo Ques
AS800
Thermo Ques
Midas
Thermo Ques
HS850
Trace GC2000+AS2000
Thermo Ques
Thermo Ques
Trace GC2000+HS2000
Tosoh
AS-8010
Tosoh
TSK-6080
4247
Unicam
Unicam
4710
Unicam
LC-XP
8035
Varian
Varian
8100
Varian
8200
8200 CX
Varian
Varian
9090
Varian
9095
Varian
9100
Varian
CombiPAL
Varian
CP-8400
Varian
CP-8410
Varian
Genesis
Varian
Maratho
Varian
ProStar 400
Varian
ProStar 410
Varian
ProStar 420
Varian
ProStar 430
Varian
Ultra GC/M
Varian
Vista
2690
Water
2710 Sample Manager
Water
Water
48 Position
96 Position
Water
Water
Alliance
Breeze
Water
Water
710
Water
712
715
Water
Water
717
TC-80 A
TC-80 B
TC-80 C
TC-80 D
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
TC-90 A TC-90 B
TC-90 C TC-90 D
TC-90 AER
TC-90 BER
TC-91 ERB
TC-110 A
TC-110 B
TC-110 C
TC-110 D
TC-110 AER
TC-110 BER
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
D2
0
hre
ad
TC-130 A
TC-130 B
TC-130 C
TC-130 D
TC-200
TC-200 A
She
l
l Vi
als
eN
He
a ds
pac
cre
Sho
rt S
Ri n
gN
D1
Sna
p
TC-110 SA
TC-110 SB
TC-110 SC
TC-110 SD
wT
1
11
ND
pN
e ck
Crim
wT
cre
Sho
rt S
wN
e ck
Scr
e
Colpak
Autosampler
Compatibility
Chart
ND
8
hre
ad
ND
9
ND
1
3
Colpaka
TC-712
TC-712 A
TC-712 B
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
14
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Vial Cross Reference Chart
Agilent
Varian
Water
Chromacol
Finneran
National
Cronus
La-Pha Colpak
Crimp Neck Vials 12 x 32mm
5181-3375
392611634
5181-3376
392611635
32011-1232
C4011-1
VZS-02CC-100
11 09 0356 TC-110 A
2-CV
32011M-1232
C4011-1W
VZS-02CC-100
11 09 0476 TC-110 B
2-CV(A)
3211M-1232A
C4011-2W
VZS-02CA-100
11 09 0477 TC-110 D
32011S-1232
C4011-5
VZS-02SC-100
11 09 0627 TC-110 SA
WAT094222
5182-0543
WAT094223
Snap/Crimp Cap Vials 12 x 32mm
5182-0544
5182-0546
WAT094219
2-RV
32011SM-1232
C4011-5W
VZS-02SC-100
11 09 0644 TC-110 SB
5181-0545
WAT094220
2-RV(A)
3211SM-1232A
C4011-6W
VZS-02SA-100
11 09 0645 TC-110 SD
32008-1232
C4013-1
VZS-0208C-100
11 09 0210 TC-80 A
32008M-1232
C4013-1W
VZS-0208C-100
11 09 0419 TC-80 B
32008-1232A
C4013-2
VZS-0208A-100
11 09 0259 TC-80 C
32008M-1232A
C4013-2W
VZS-0208A-100
11 09 0382 TC-80 D
32009-1232
C4000-1
VZS-0209C-100
11 09 0500 TC-90 A
32009M-1232
C4000-1W
VZS-0209C-100
11 09 0519 TC-90 B
32008-1232A
C4000-2
VZS-0209A-100
TC-90 C
32009M-1232A
C4000-2W
VZS-0209A-100
11 09 0520 TC-90 D
C4015-1
8mm Screw Cap Vials 12 x 32mm
5183-4428
392611639
2-SV
5183-4429
392611640
2-SV(A)
5182-0714
39261165
5182-0715
186000273
2-SVW
392611654
5182-0716
186000848
2-SVW(A)
5183-4448
186000840
4-SV
34013-1545
5182-4450
186001135
4-SV(A)
VZS-0415C-100
13 09 0222 TC-130 A
C4015-11W VZS-0415C-100
13 09 1335 TC-130 B
C4015-2
VZS-0415A-100
13 09 0280 TC-130 C
34013-1545A
C4015-2W
VZS-0415A-100
11 09 1136 TC-130 D
20mm Headspace Vials
5182-0838
392611677
5182-0837
392611675
310020-2346
C4020-10
VZH-10CF-100
20 09 0795 TC-200
20-CV
320020-2375
C4020-20
VZH-20CF-100
20 09 0796 TC-200 A
1-NWV-C/200
9800-840(alt.)
C4015-96
/200(Alt.)
VKL-0103-GCC250
08 14 1168
1ml Shell Vials Micro-Inserts
WAT022479
TC-712
TC-712 A
TC-712 B
15
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Product Index
Catalog
No.
Page
No.
Catalog
No.
Page
No.
Catalog
No.
Page
No.
Catalog
No.
Page
No.
TC-50 A
8
TC-92 A
4
TC-96 BE
5
TC-117 A
3
TC-50 B
8
TC-92 B
4
TC-96 BF
5
TC-117 B
3
TC-50 C
8
TC-92 C
4
TC-96 BG
5
TC-117 C
3
TC-50 D
8
TC-92 D
4
TC-110 A
3
TC-117 F
3
TC-60 A
3,5,8
TC-92 E
4
TC-110 B
3
TC-117 G
3
TC-60 B
3,5,8
TC-92 F
4
TC-110 C
3
TC-130 A
7
TC-60 C
3,5,8
TC-92 G
4
TC-110 D
3
TC-130 B
7
TC-60 D
3,5,8
TC-94 B
4
TC-110 AER
3
TC-130 C
7
TC-94 BA
4
TC-110 BER
3
TC-130 D
7
TC-94 BB
4
TC-110 SA
6
TC-136 KA
7
TC-94 BC
4
TC-110 SB
6
TC-200
7
TC-94 BD
4
TC-110 SC
6
TC-200 A
7
TC-94 BE
4
TC-110 SD
6
TC-202 H
7
TC-94 BF
4
TC-110 SG
6
TC-202 J
7
TC-94 BG
4
TC-110 SH
6
TC-204
7
TC-70
5
TC-80 A
6
TC-80 B
6
TC-80 C
6
TC-80 D
6
TC-84 K
6
TC-84 KA
6
TC-90 A
4
TC-95 B
5
TC-110 SI
6
TC-206
7
TC-90 B
4
TC-95 BA
5
TC-112 A
3
TC-206 H
7
TC-90 C
4
TC-96 B
5
TC-112 B
3
TC-206 J
7
TC-90 D
4
TC-96 BA
5
TC-112 C
3
TC-712
5
TC-90 AER
4
TC-96 BB
5
TC-112 F
3
TC-712 A
5
TC-90 BER
4
TC-96 BC
5
TC-112 G
3
TC-712 B
5
TC-91 ERB
4
TC-96 BD
5
TC-117
3
16
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
"TEST-IT" Brand Test Tube
Made from 33 expansion Tubing of uniform thickness for better heat transfer & chemical resistance.
Borosilicate hard glass grade I meets ASTM standards.
Permanent white marking on test tube with Lot. No.
Packed as per International standards of 72 pcs /box.
Features
Grade I
Borosilicate Glass
33 Expansion
With Rim & Without Rim
Non-Sterile
Complies with IS 2618:2006
As per ASTM (Europeon)Standard
Typical Packing of
Test Tubes
72 pcs
Available Sizes (With Rim/Without Rim)
Catalog No.
With Rim
Catalog No. Over Flow
Without Rim Capacity
Size
Packing
6110075
6210075
4ml
10 x 75
72/100
6112075
6212075
6ml
12 x 75
72/100
6112100
6212100
10ml
12 x 100
72/100
6115125
6215125
16ml
15 x 125
72/100
6115150
6215150
24ml
15 x 150
72/100
6118150
6218150
28ml
18 x 150
72/100
6125100
6225100
36ml
25 x 100
72/100
6125150
6225150
55ml
25 x 150
72/100
17
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Glass Syringes
Features
Syringes metal luer lock tip meets the specification of the American National Standards for Medical Materials luer taper fitting
performances ISO 594 (Earlier HIMA MD 70.1-1983)
Syringe cylinder plunger fit is leak proof and meets the requirements of Federal Specification GG-S-92 lb / A-A-54840 / ISO
7886
The printing of graduation & Logos on the syringe is done by an in house developed ink which is permanently fused in to the
glass. This accounts for a life time accuracy and legibility.
Syringes offer clarity, physical strength, chemical inertness and safety that are assured with glass
1 ml
Syringe reinforced Flanges which is flat on two sides prevent the syringe from rolling
2 ml
Syringes are made by an ISO 9001 & ISO 13485 certified company
Syringes Cylinder made of 1st Hydrol Class
5 ml
Syringes confirm to ISO 594/1; 595/2
10 ml
Capacity
Catalog No.
Graduation Packing
1ml
04-04-02-01
0.01ml
10
2ml
01-05-02-05
0.2ml
10
5ml
01-08-02-06
0.5ml
10
10ml
01-09-02-07
1ml
10
20ml
01-10-02-08
2ml
10
30ml
01-11-02-08
2ml
10
50ml
01-13-02-10
5ml
10
100ml
01-15-02-10
5ml
10
20 ml
30 ml
50 ml
100 ml
GlasSPE Brand SPE Column Blanks
Solid Phase Extraction (SPE) Empty Column Blanks, Cartridges, Cylinders Made of Borosilicate Glass
USP Type 1
Capacity
Packing
0.5ml
10
1ml
10
3ml
10
6ml
10
12ml
10
20ml
10
35ml
10
60ml
10
100ml
10
18
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Brand Products
-20° C / -40° C
Deep Freezer
with PLC
Orbital Shaker
Incubator
Vacuum Oven
Rectangular
Lab Refrigerator
with PLC
Stability /
Photo Stability
with PLC
BOD Incubator
with PLC
Lab Precision Oven
Bacteriological
Incubator
Muffle Furnance
Constant Temperature Bath
E-mail: [email protected]
Walk in
Stability Chamber
Vertical Lab Autoclave
(G M P Model)
Vaccum Oven
Circular
Cryo Bath
Also visit www.tempoinstruments.com
Seed Germinator
Water Still
Hot Plate
Melting Point Apparatus
Cooling Chamber
All Glass Water Still
Heating Mantles
Multicell Ageing Oven
Heavy Duty Oven
Water Bath
Shaker Water Bath
Soxhlet Extraction Heater
Heating Cord
Tray Dryers
Drying Oven
Drum Heaters
19
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Brand Lab Refrigerator
STANDARD MODEL
GMP MODEL
Inside S.S. 304 with mirror finish
Outside mild steel powder coated.
Inside S.S. 316 with mirror finish
Outside stainless steel 304 with dull buff finish.
make Lab Refrigerators are made of double walled and triple at backside construction. Full view inner acrylic door & front door with gasket & lock. Motorized
blower is fitted on the back side for uniform temperature.
Catalog No.
Capacity
Liters
Internal Dimension
H x W x D (cm)
Outer Dimension
H x W x D (cm)
Trays
TI-810 S/G
100
50 x 50 x 40
113 x 71 x 91
2
TI-811 S/G
170
70 x 60 x 40
133 x 81 x 91
2
TI-812 S/G
200
60 x 60 x 60
123 x 81 x 111
2
TI-813 S/G
285
80 x 60 x 60
146 x 81 x 111
3
TI-814 S/G
325
90 x 60 x 60
156 x 81 x 111
3
TI-815 S/G
400
110 x 60 x 60
176 x 81 x 111
3
TI-816 S/G
600
125 x 70 x 70
191 x 91 x 121
4
TI-817 S/G
800
125 x 80 x 80
193 x 91 x 121
5
TI-818 S/G
1000
157 x 80 x 80
225 x 101 x 131
5
TI-819 S/G
1500 Double Door
146 x 150 x 69
241 x 171 x 120
10
TI-820 S/G
2000 Double Door
146 x 150 x 92
241 x 171 x 143
10
Technical Data
Temp. Range
: 2°C to 8°C
Temp. Accuracy : ± 0.5°C
Temp. Uniformity : ± 2°C
Supply
: 230V, AC.
Optionals
1) PLC for auto changeover
6) Scanner 4 or 8 point temperature scanner
complete with sensors
2) Standby refrigeration system
3) Safety digital temperature controller
7) Stainless steel rod trays
4) Data logger
8) Mobile alert system
5) CFR 21 Part 11 compliance software
9) Security system (Door access)
For more details please visit www.tempoinstruments.com
Brand Pipettes
make Pipettes are the best in class laboratory pipettes to provide high precision, accuracy
and efficiency. It operates on an air displacement principle and uses datable, disposable tips.
Fixed Volume Pipettes
Catalog No.
Capacity
µl
Accuracy
(%)
Precision
(CV%)
Colour
TI-FVP-A
5
±2.50
±2.20
Ivory
TI-FVP-B
10
±1.20
±2.00
Ivory
TI-FVP-C
20
±1.00
±1.00
Ivory
TI-FVP-D
25
±1.00
±1.00
Ivory
TI-FVP-E
50
±1.00
±0.80
Orange
TI-FVP-F
100
±0.60
±0.60
Orange
TI-FVP-G
200
±0.40
±0.40
Orange
TI-FVP-H
250
±0.80
±0.40
Blue
TI-FVP-I
500
±0.60
±0.40
Blue
TI-FVP-J
1000
±0.30
±0.30
Blue
Variable Volume Pipettes (Coming Soon)
Pipette (representation only)
Colpaka
[email protected]
www.colpak.co.in
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Notes
Contact:
Manufactured by
Marketed by
Top Syringe Mfg. Co. Pvt. Ltd.
Sewa Medicals Ltd.
Works:
Website: www.sewamedicals.com
Office:
10-11, Prospect Chamber Annexe,31721, Dr. D.N. Road, Fort,Mumbai, 400 001.
Tel. +91.22.6520.8849/50
Fax. +91.22.2204.5352
Tempo Instruments Pvt. Ltd.
Top Syringe Compound, W. E. Highway,
Pandurang wadi, Mira Road (East),
Thane 401 104
Website: www.tempoinstruments.com
Hyderabad Office:
H.No. 1-8-495/27, Vikhar Nagar,
Prakash Nagar, Begumpet, Secunderabad
Email :- [email protected]
20120403
Top Syringe Compound, W. E. Highway,
Pandurang wadi, Mira Road (East),
Thane 401 104

Colpak Caltlog

Transcription

Similar documents