docBRUSH GASKETING
download 
Report Transcription
BRUSH GASKETING
BRUSH GASKETING CONTENTS: 180O Aluminum Retainers............................................................................................. 90-91 180O Concealed Fastener Retainers.................................................................................... 91 90O Aluminum Retainers...................................................................................................... 92 45O Aluminum Retainers................................................................................................ 92-93 45O Concealed Fastener Retainers...................................................................................... 93 35O Aluminum Retainers...................................................................................................... 94 Mortise Retainers.................................................................................................................. 94 Aluminum Retainers With Rain Drip.................................................................................. 94 Oak Retainers 36" Wide....................................................................................................... 94 Meeting Stiles........................................................................................................................ 95 Automatic Door Bottoms..................................................................................................... 96 INDEX: PRODUCT PAGE 345...............................94 411...............................96 434...............................96 3452.............................94 4131.............................96 4301.............................96 5025.............................94 5041.............................94 5061.............................94 18041....................91, 95 18061....................91, 95 18062..........................91 18062W.......................94 BR-1 © 2009 Pemko Manufacturing Co. Rev. 4, 05.01.09 PRODUCT PAGE 18100..........................91 18100W.......................94 18137..........................90 18175..........................90 18250..........................90 18400..........................90 18950..........................90 29324....................91, 95 29326....................91, 95 29344..........................93 29346..........................93 35041..........................94 35061..........................94 PRODUCT PAGE 45041..........................93 45061..........................93 45062..........................92 45100..........................93 45137..........................93 45175..........................92 45250..........................92 45400..........................92 90041..........................92 90062..........................92 90100..........................92 90137..........................92 293100........................91 89 BRUSH GASKETING 180° Aluminum Retainers • All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use Pemko’s brush weatherstripping products on overhead doors, sectional doors, sliding doors, and automatic doors. • All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes. • Some brush products are now available in painted white aluminum with white colored nylon brush (example: 18062PWNB). • The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force. • Brush remains flexible down to -40°F and has a melting point above 400°F. • UV stabilized, dependable, long-lasting, cost-effective. • Nylon brush insert is designated by a “NB” following the finish code. • All brush seals come with #6 x 5/8" stainless steel sheet metal screws. • BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration. • Punched with slotted holes for adjustment (except 35° angle types which are drilled with 1/8" hole). • All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush. 18175_NB 18250_NB AVAILABLE FINISHES: C, D, G, PW AVAILABLE FINISHES: C, D, G AVAILABLE FINISHES: C, D, G AVAILABLE FINISHES: C, D 18400_NB AVAILABLE FINISHES: C, D, G BRUSH GASKETING 18137_NB 18950_NB 18950_NB does not come punched or drilled unless specified otherwise. AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White) 90 VENTURA , CA USA PH. 800.283.9988 MEMPHIS, TN USA PH. 800.824.3018 VANCOUVER, BC CANADA PH. 877.535.7888 TORONTO, ON CANADA PH. 866.243.9816 BR-2 BRUSH GASKETING 180° Aluminum Retainers (Cont.) 18041_NB 18061_NB 18062_NB 18100_NB AVAILABLE FINISHES: C, D, G, SN AVAILABLE FINISHES: C, D, G, SN AVAILABLE FINISHES: C, D, G, PW AVAILABLE FINISHES: C, D, G, PW ALTERNATE INSERT FOR 18041 18041_SB AVAILABLE FINISHES: C, D, G, SN • Aluminum snap cover conceals mounting screws to provide a clean aesthetic appearance. • Covers snap securely into place to deter vandalism. • All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush. 293100_NB 29326_NB 29324_NB AVAILABLE FINISHES: C, D AVAILABLE FINISHES: C, D, G AVAILABLE FINISHES: C, D, G BRUSH GASKETING 180° Concealed Fastener Retainers ALTERNATE INSERT FOR 29324 29324_SB AVAILABLE FINISHES: C, D AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White) • SN (Satin Nickel Anodized) BR-3 www.pemko.com 91 BRUSH GASKETING 90° Aluminum Retainers • Design permits use as a concealed seal for many applications. • Slotted holes for adjustment. • See the information section at top of page 90 for additional data on the brush weatherstrip shown on this page. 90041_NB 90062_NB 90100_NB 90137_NB AVAILABLE FINISHES: C, D AVAILABLE FINISHES: C, D AVAILABLE FINISHES: C, D, G AVAILABLE FINISHES: C, D, G ALTERNATE INSERT FOR 90041 90041_SB BRUSH GASKETING AVAILABLE FINISHES: C, D 45° Aluminum Retainers • BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration. • See the information section at the top of page 90 for additional data on the brush weatherstrip shown on this page. 45400_NB 45250_NB 45175_NB AVAILABLE FINISHES: C, D AVAILABLE FINISHES: C, D, G AVAILABLE FINISHES: C, D, G AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) 92 VENTURA , CA USA PH. 800.283.9988 MEMPHIS, TN USA PH. 800.824.3018 VANCOUVER, BC CANADA PH. 877.535.7888 TORONTO, ON CANADA PH. 866.243.9816 BR-4 BRUSH GASKETING 45° Aluminum Retainers (Cont.) 45061_NB 45062_NB 45100_NB 45137_NB AVAILABLE FINISHES: C, D, G, SN AVAILABLE FINISHES: C, D, G, PW AVAILABLE FINISHES: C, D, G, PW AVAILABLE FINISHES: C, D, PW 45041_NB AVAILABLE FINISHES: C, D, G, SN ALTERNATE INSERT FOR 45041 45041_SB BRUSH GASKETING AVAILABLE FINISHES: C, D, G, SN 45° Concealed Fastener Retainers 29344_NB AVAILABLE FINISHES: C, D ALTERNATE INSERT FOR 29344 29344_SB 29346_NB AVAILABLE FINISHES: C, D AVAILABLE FINISHES: C, D AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White) • SN (Satin Nickel Anodized) BR-5 www.pemko.com 93 BRUSH GASKETING 35° Aluminum Retainers • These products have 1/8" drilled fastener holes. 35061_NB 35041_NB ALTERNATE INSERT FOR 35041 AVAILABLE FINISHES: C, D, G AVAILABLE FINISHES: C, D, G 35041_SB AVAILABLE FINISHES: C, D, G Mortise Retainers • The ultimate design for concealed weatherstrip needs. • Can be used on doors, windows and more. • BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration. • All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush. 5061_NB 5025_SB AVAILABLE FINISHES: A AVAILABLE FINISHES: A AVAILABLE FINISHES: A BRUSH GASKETING 5041_NB ALTERNATE INSERT FOR 5041 5041_SB AVAILABLE FINISHES: A Aluminum Retainers with Rain Drip Oak Retainers 36" Wide • These products have 1/8" drilled fastener holes. 18062WNB 3452_NB 345_NB AVAILABLE FINISHES: BDG, C, D, G, PW, SN AVAILABLE FINISHES: A, BDG, D, G, PW AVAILABLE FINISHES: W 18100WNB AVAILABLE FINISHES: W AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) A (Mill Finish Aluminum) • BDG (Bright Dip Gold Anodized) • C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) PW (Painted White) • SN (Satin Nickel Anodized) • W (Solid Oak) 94 VENTURA , CA USA PH. 800.283.9988 MEMPHIS, TN USA PH. 800.824.3018 VANCOUVER, BC CANADA PH. 877.535.7888 TORONTO, ON CANADA PH. 866.243.9816 BR-6 BRUSH GASKETING Meeting Stiles • Astragals and meeting stiles on double doors often present problems because of • All clear anodized brush products are supplied with gray brush (available complex conditions and requirements. Pemko offers some simple and inexpensive with black brush upon request). Other finishes supplied with black brush. solutions as well as more detailed ones. Each job should be carefully studied as • BHMA logo represents products that meet the requirements of ANSI/BHMA to the specific requirements when selecting the appropriate gasketing. Note that 156.22-2003 for latching force and air infiltration. some astragals consist of two parts, one for each door, and should be ordered as such. • Snap covering helps prevent vandalism and adds an attractive finished look • Astragals and meeting stiles with a fire label may be mounted on pairs of doors by concealing the fasteners. wherein the gap meets the requirements of NFPA 80, 2-3.1.7 “ The clearance • NOTE: Although drawn with a gap between the brushes, when these between...the meeting edges of doors swinging in pairs on the pull side shall be 1/8” ± 1/16” (3.18mm ± 1.59mm) for steel doors and shall not exceed 1/8” products are installed, brushes SHOULD make slight contact. (3.18mm) for wood doors.” 18041_NB 29324_NB AVAILABLE FINISHES: C, D, G, SN AVAILABLE FINISHES: C, D, G NOTE: Brush should mesh from 1/32" to 1/16". ALTERNATE INSERT FOR 18041 ALTERNATE INSERT FOR 29324 18041_SB 29324_SB AVAILABLE FINISHES: C, D, G, SN AVAILABLE FINISHES: C, D, G 18061_NB 29326_NB AVAILABLE FINISHES: C, D, G, SN AVAILABLE FINISHES: C, D NOTE: Brush should mesh from 1/32" to 1/16". BRUSH GASKETING NOTE: Brush should mesh from 1/32" to 1/16". NOTE: Brush should mesh from 1/32" to 1/16". AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • SN (Satin Nickel Anodized) BR-7 www.pemko.com 95 BRUSH GASKETING Automatic Door Bottoms • When ordering, please specify if the automatic door bottom is for a semi-mortise application so that shorter screws can be provided. • BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration. BRUSH GASKETING • All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush. 411_NBL 434_NBL AVAILABLE FINISHES: A AVAILABLE FINISHES: A 4131_NBL 4301_NBL AVAILABLE FINISHES: BDG, C, D, G, SN AVAILABLE FINISHES: C, D AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) A (Mill Finish Aluminum) • BDG (Bright Dip Gold Anodized) • C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • SN (Satin Nickel Anodized) 96 VENTURA , CA USA PH. 800.283.9988 MEMPHIS, TN USA PH. 800.824.3018 VANCOUVER, BC CANADA PH. 877.535.7888 TORONTO, ON CANADA PH. 866.243.9816 BR-8
