online catalog - First Choice Industrial, LLC

Transcription

F
C 2011I
First Choice Industrial, LLC
First in customer satisfaction
First Choice
Industrial,
LLC
A FULL SERVICE
WOODWORKING
MACHINERY
&
EQUIPMENT
DEALER
SERVING CUSTOMERS
NATIONWIDE
First
Choice Industrial,
LLC 145Park
Auburn
Park
Drive,Georgia
Auburn,30011
Georgia 30011
First Choice
Industrial,
LLC 145 Auburn
Drive,
Auburn,
Phone:
(678)
642-9722
Email:
[email protected]
Phone: (678) 642-9722 Email: [email protected]
F
C
I
First Choice Industrial LLC,
is an authorized SCM Woodworking Machinery & Commercial Equipment Dealer
First Choice Industrial, LLC 145 Auburn Park Drive, Auburn, Georgia 30011
F
C
I
Our additional suppliers include . . .
__________________________________________________________________________
LARICK
F
C
I
Our professional services include . . .
____________________________________________________________________________
 New woodworking machinery & equipment sales
 Used woodworking machinery & equipment sales
 Machinery repair & installation
 Repossession Services:
•
•
•
•
•
machinery evaluation
de-installation
remarketing
storage
consignment sales
 LEEDS Consultation
 Leasing
F
C
I
First Choice Industrial LLC
145 Auburn Park Drive
Auburn, GA 30011
Email: [email protected]
Phone: 678-642-9722
Fax: 770-242-9388
________________________________________________________________________________________________________________
Owners
Stan Paszkowski
Randy Majerus
770-861-0570
S.Georgia & N.Florida
[email protected]
770-861-0568
North Georgia
[email protected]
____________________________________________________________________________________________________________________
To Contact A Regional Sales Representative
Call: 678-642-9722
or
Email:[email protected]
_______________________________________________________________________________________________________________
Web Sites:
http://www.firstchoiceind.net/
http://www.preownedwoodworkingmachinery.com/
Blog:
http://firstchoiceind.net/blog/
Join us on . .
F
C
I
WIDE BELT SANDERS
For over 50 years SCMI has manufactured the most accurate and reliable wide belt sanders in the industry.
SCMI has you covered with the finest finish in the business with state-of-the-art dead shaft technology design
and zero reference point alignments. The number one selling sanders in the world! These machines come in
single head and up to five heads for solid wood and veneer.
SANDYA SERIES
Industrial Wide Belt Sanders
Sandya Uno
Sandya 3S
Sandya 5S
Sandya 9S
Sandya 16S
DMC
Advanced Wide Belt Sanders
Technosand K
Unisand K
Mastersand
MOULDERS
SCM Group-USA offers a range of through-feed moulders designed to withstand the demands of the U.S.
Woodworking Industry. "Superset" spindle positioning, pneumatic chip breakers, superior spindle design, and
monoblock unitized construction are just a few exclusive features that set SCM Moulders apart from all of the
others. With seven product ranges and sixteen configurations available, SCM has your moulder solution.
Compact XL
Superset XL
Topset XL
F
C
I
PROFILE GRINDERS
GANG RIP SAWS
Saves time and money. Grind your
own knives for your moulders and
shapers.
75-12
These saws will rip a mountain of
lumber in a matter of minutes.
Available in 42HP and 60HP
Profile Max 300
M3
EDGEBANDERS
With all new models, the SCMI edgebander line is more competitive than ever. Being the heaviest in the
industry, allows for stability and ease of production. From tape machines to computerized double-sided banders,
SCM has a bander for any size shop.
OLYMPIC K AND S SERIES
Industrial Line Edgebanders
Olympic K 300
Olympic K 500
Olympic S2000
STEFANI
Advanced Line Edgebanders
Stefani Solution
Stefani Evolution SB
Stefani Solution HD
F
C
I
PANEL SAWS
SCM GROUP USA Sigma and Gabbiani Series Panel Saws offer superior features and superior speeds not
found on other panel sizing machines in this class. Accuracy, dependability, and functionality are a few
characteristics synonymous with the Sigma and Gabbiani Series Panel Saws.
SIGMA SERIES
Industrial Line Panel Saws
Sigma Impact 85K
Sigma Impact 105 P
Sigma Plus 107 P
GABBIANI SERIES
Advanced Line Panel Saws
Galaxy 125
Galaxy 140
Axioma 125
Ocean
TENONERS
The Concept Series of tenoners were designed for accuracy over time, throughput productivity, and a dramatic
reduction in set-up time. The set-up time reduction is via CNC axis and spindles with rapid tool changers. With
over 40 working units available a machine is likely available for your application.
CONCEPT SERIES
Concept Mono
Concept NT
F
C
I
SCM GROUP CLASSICAL LINE MACHINES
SCM GROUP USA offers a wide range of their classical line of machines: jointers, planers, sliding table saws,
shapers, routers, and boring machines.
SLIDING TABLE SAW
SHAPERS
The first 10' stroke model offered is basic on features,
and heavy on quality and reliability. This 12" blade
saw is designed to be an economic solution for the
small shop yet it includes high-end construction
features, ensuring a long operating life.
TI 115 NOVA is the SCM heavy industrial shaper
designed for full production workloads ensuring
maximum finish quality in the work piece.
SI 300 Nova
TI 115 Nova
Other Sliding Table Saws Include: SI 300 S Nova, SI
400 Digital Nova, S 400 EP3 Nova, SI 300 Series, SI
400 Series and SI 400 Vanguard
JOINTERS
The 1,653 pound SCMI F 410 NOVA 16" jointer is
distinguished by its high degree of safety and
reliability over time.
Other Shapers Include: TI 110 Nova, TF 130
Class, and TI 155 Class
PLANERS
The SCMI S 520 planer is noise level rated at only
70 decibels making it the quietest planer in its range.
F 410 Nova
S 520 Nova
Other Models Include: F 520 Nova, 20” Model
Other Models Include: S 630 Nova
F
C
I
SUPERFICI FLAT LINE FINISHING MACHINES
Superfici supplies complete lines and individual machines, which include: Sprayers, Roller Coaters, Curtain
Coaters, Brushing Machines, Denibbers, UV Dryers, Stacking Dryers, Flat Dryers, Conveyors, Material
Handling, and related equipment.
Individual Spray Unit
Compact Reciprocating Spray Line
CNC MACHINING CENTERS & ROUTERS
"Dollar for dollar" the SCMI Machining Center is the best in the industry. Whether it's nesting or machining,
we have the solution to fit your shop.
TECH Z SERIES
PRATIX N SERIES
The Tech Z Series Models Z25 & Z30 have a full of
array of features that make these machines very
capable and versatile. With a large drill head, grooving
saw and robust electro spindle; just to name a few, the
Tech Z is a versatile high performance Point to Point
machine for a practical price.
The Pratix N Series is a CNC boring and routing
center for nesting operations. The Pratix N Series
has a 4’x 8’ or 5’x12’ table and an easy to use, entry
level, CNC with a multilayer high-rigidity, phenolic
worktable and easy to use vacuum with a patented
magnetic system, as well as an electrical cabinet and
vacuum pump incorporated into the machine base.
F
C
I
ROUTECH & MORBIDELLI CNC MACHINING CENTERS
Routech and Morbidelli manufacture a comprehensive range of CNC machinery with valuable features
available to minimize changeover time, while decreasing cycle times. Routech and Morbidelli routers include
installation on site with software and machine training.
ROUTECH CNC Routers
Record 125 Series
Record 132 Series
Record 210 Series
MORBIDELLI Advanced CNC Machining Centers
Universal NBR
STRIEBIG COMPACT
Author 300 Series
Author 600 Series
STRIEBIG EVOLUTION
With their own manufacturing methods and a high proportion of in-house production, Striebig AG puts all their
know-how into the production and development of vertical panel saws. Simply the World’s Best Vertical Panel
Saws for Panels or Solid Surface. These saws will improve your accuracy, productivity and repeatability.
F
C
I
NEDERMAN - (DANTHERM) - FILTRATION
Bags (Standard)
Barrels (Optional)
Dump Bin (Optional)
Quick to install and easy to operate, S-Series dust collectors are the ideal solution for the smaller workshop.
Designed for indoor locations, S-Series dust collectors and can be readily re-located as required. The S-Series
comes in 3 models. The S-500 (5hp) The S-750 (7.5hp) and The S-1000 (10hp).
CFM Range: 1,500 to 5,000 CFM
Key features
•
•
•
•
•
•
•
•
Neat, compact, unobtrusive
Quick and easy to install
Bag or steel bin dust collection options
Standard units in three sizes
One bag size fits all
Quiet running efficient 1450 RPM fans
Simple maintenance
Dantherm QF versatile clip together duct connections
Typical applications
•
•
•
Woodwork, dust extraction from small and medium workshops
Mixed workshop applications
Educational workshops – ceramics, crafts, woodwork
F
C
I
CA, CAM Cyclone Separator
The CA and CAM is a range of ten cyclone separators designed with high efficiency in mind.
The CA type offers an economic solution for normal duty. The CAM is a heavy duty unit to withstand abrasive
materials.
Key features
•
•
•
•
•
•
•
Robust fully welded steel construction
Weatherproof for exposed locations
Normal and heavy duty options
10 sizes from 500 to 20000m3/h
High efficiency up to 90% at 4 micron
Wide range of options
Also available in stainless steel or aluminum
Typical applications
•
•
•
General purpose pre-separation duties
Heavy duty pre-separation of abrasive materials
Separation of materials in pneumatic transport systems
F
C
I
NFP Bag Filters
The NFP reverse air, dust collector is suitable for airflows between 1,000 and 9,000 CFM and is available in
OPEN or CLOSE panel construction. It also has the option for manual or reverse air cleaning.
Key features
•
•
•
•
•
•
Modular
Expandable
Quiet operation
Small footprint
Indoor & outdoor units available
Bag or barrel material collection
Typical dust control and process applications
•
•
•
•
•
•
High Speed Routing
Sawing
Cutting
Sanding
Single ‘Cell' Manufacturing
After-Filters
F
C
I
CS Bag Filters
The CS is a larger, reverse air, dust collector suitable for airflows between 4,000 and 20,000 CFM with various
hopper discharge options.
Key features
•
•
•
•
•
•
•
•
Modular
Expandable
Customizable range
Fully automatic operation
Low profile
Quiet operation
No compressed air requirement
Multiple waste collection options
•
•
•
•
•
•
High Speed Routing
Cutting
Centralized Systems
Sanding
Grinding
After-Filters
F
C
I
NFK3000 Bag Filters
The NFK3000 filter is a compact filter, well suited for any air flow with heavy material content. It is designed
with a basic module size of 1200 x 1200 mm. Additionally, the design makes it possible to add modules if the
capacity is increased. The filter is self-supporting with telescopic supporting legs suitable for outdoor locations.
Each module (either 1200 or 2400 mm wide) of the filter construction is fitted with a combined inspection and
explosion relief door. Regeneration fans are fitted for easy and effective cleaning of the filter bags. The
NFK3000 filter is fitted with the unique patented Dantherm Filtration SUPERBAG filter bag. The filter hopper
and the inlet section (optional) separate the particles and distribute the air to the filter bags. The collected
material can be removed through a wide range of discharge and waste handling options.
Key features
•
•
•
•
•
•
•
•
Modular galvanized steel construction
Easy to install on site and extend if required
ATEX certified for St1 and St2 dust with a Kst value up to 300 bar m/s.
Available for positive or negative pressure operation
Low power consumption
Powerful on-line cleaning by efficient regeneration fans
Patented polyester SUPERBAG filter bags
Wide range of discharge and waste handling options
•
•
•
Timber and Wood working machinery
Furniture production
Lightweight bulk materials
F
C
I
U.S. CONCEPTS
US Concepts has developed and built hundreds of for any size woodworking shop.
arch moulders, haunchers, and profile sanders
WEIMA WASTE GRINDERS
Cut your waste hauling costs in half. Weima can
grind your wood waste and send it up the dust
chute or into the dumpster.
UNIQUE MACHINE AND TOOL CO.
Unique Machine and Tool Co. has been
producing the Raised Panel Door Machine for
over 18 years with satisfied customers
throughout the world!
KAESER COMPRESSORS
Kaeser earns their customer’s trust and satisfaction
by manufacturing the highest quality compressed
air and blower products available anywhere.
NORDFAB
Nordfab introduced Quick-Fit in 1990. As well
as being the originator, Nordfab is the industry
leader, and the world’s largest supplier of clamptogether ducting.
F
C
I
RITTER MANURACTURING INC
Ritter Manufacturing, Inc. is a manufacturer of
drilling and boring, shaping, sanding, clamping
machines, assembly systems, and related specialty
machines used in the woodworking industry.
BALESTRINI
Balestrini manufactures high-tech CNC machining
centers for professional quality miter door
production.
ITALPRESSE
Italpresse has supplied hydraulic press and
thermofoil press systems to worldwide markets
for more than forty years, establishing it as an
industry leader with products known for quality,
value, and reliability.
RAZORGAGE
RazorGage provides positioning and optimizing
systems, also known as digital stops, automated
stop gauges or pusher gauges, that are designed
to accurately cut your components every time.
COL-MET SPRAY BOOTHS
Col-Met Spray Booths is a manufacturer of paint
booths, spray booths, powder booths, air makeup
units, mixing rooms, batch ovens, and accessories
for industrial, automotive, wood finishing, and
other applications.
NORTHTECH
A complete line of Machines, including
shapers, planers, jointers, sanders, saws and
moulders for the budget minded
woodworker.
F
C
I
DENRAY MACHINES
Denray down draft tables are an industry leader in
wood, metal, and many other dust control
applications which are specially suited to control
dust during sanding, routing, cutting, and finishing
of wood, fiberglass and plastics as well as welding,
grinding, polishing, and cutting of metal products.
RADIO FREQUENCY SYSTEMS
Radio Frequency Services is the #1 manufacturer
of radio frequency edge and face gluing systems,
including the Slant Bed product lines.
PAUL SAWS
The range of machinery has been expanded and
defined over the years and today Paul is able to
offer machinery and systems for both ripping and
crosscutting of solid wood and panels.
OPTI-SAND
Opti-Sand produces sanding machines for
sanding mouldings, trim, flooring, linear parts,
bleacher seats, paneling, entry doors, cabinet
doors, drawer fronts, face frames, MDF parts
for powder coating, office and home furniture
components and more.
SOUTHWORTH
Southworth offers more ergonomic lifting and
positioning equipment designed to improve worker
safety and increase productivity than any other
materials handling company.
JLT CLAMPS
JLT machines are specifically designed to increase
production and quality, while saving valuable shop
floor space. Over the years, the JLT product line has
expanded to offer innovative machines such as the
very successful Pneumatic Miter Door Clamp and
Rotating Miter Door Pro.
F
C
I
DOUCET
F
C
I
DOUCET Continued
F
C
I
DOUCET Continued
Doucet Machinery for the furniture and woodworking industry is a leading manufacturer of automatic return
conveyors and material handling solutions that will “streamline” your manufacturing operation and bring your labor
cost under control. Additional Doucet Machinery solutions, include end matchers, return conveyors, clamp carriers,
sanding and boring machines, and more...
KOCH
KOCH is known world-wide for high-tech
boring and dowel insertion machinery for the
manufacturing of furniture, cabinets, windows,
doors, and other wood related products.
KREG
Kreg Tool Company has emerged as the leader in
Pocket Hole Technology. From the manual K3 Kreg
Jig®, to the fully-automatic Pro Series machines,
Kreg offers a simple solution that has changed the
way thousands of woodworkers join wood.
OMEC
FLEX TRIM
OMEC specializes in the production of a wide
range of manual and automatic dovetailing
machines.
Flex Trim A/S develops, manufactures,
and sells sanding solutions based on a
patented and international renowned
brush technology.
F
C
I
OMGA
OMGA is known worldwide for their
accuracy in miter and radial arm saws.
LARICK
Larick Profile Sanders and Shaping
Machines are perfect for raised panels and
outside door edge profiles.
SCHMALZ
Schmalz vacuum lifting devices simplify daily
handling tasks— work pieces weighing up to
4,400 pounds can be lifted with the standard
models.
PISTORIUS
PISTORIUS offers an extensive variety of
machines for numerous applications. From
mitering and double-cut machines, to
milling, haunching, and finishing.
POWERMATIC
Powermatic is one of the oldest names in the
woodworking business for yielding
professional production results without
breaking the bank.
AETNAGROUP
AETNA GROUP produces and sells stretch wrapping
machines, bundlers, shrink film wrappers, cartoning
and taping machines on a worldwide basis
F
C
I
ACCU SYSTEMS
Accu-Systems specializes in building custom machinery to fit customers’ needs, currently producing 30+
custom machines per year, at their production facility and machine shop with the support of in house
mechanical and software engineers that can drive these custom projects thru to completion.
CARLSON SYSTEMS ENGINEERING
Carlson Systems Engineering, has over 35 years e have grown our expertise into the custom design and build of
assembly systems for wood, vinyl, aluminum and glass.
F
C
I
SCMi LEASING
SCMi Leasing is the answer when financing any capital woodworking machinery. They have
over fifteen years experience as a leasing agent. There is very little paperwork and same day
approval.
The company is owned and operated under SCM Group North America which is located in
Duluth, GA. By being closely oriented with SCM Group North America, SCMi Leasing has a
leg up on the competition, due to the available knowledge about the collateral used when
applying for leasing.
SCMi leasing is committed to the success of its clients, “Your Success Story Becomes Our
Success Story”.
(SEE SCMi LEASING APPLICATION ON PAGE 15)
Leasing Benefits
•
24 hour approval
•
No large cash outlay
•
Access to competitive interest rates
•
Manageable monthly payments
•
Payments are tax deductable
•
No liabilities on financial statements
•
Won’t affect your bank line of credit
F
C
I
F
C
I
Notes:
F
C
I
145 Auburn Park Drive
Auburn, GA 30011
Phone: (678.642.9722)
Email: Firstchoiceind.net
Website: www.firstchoiceind.net
Visit our online showroom at . . . preownedwoodworkingmachinery.com

online catalog - First Choice Industrial, LLC

Transcription

Similar documents

Firehouse hosts Great Big Home Show

WELCOME TO CAESARS PALACE

MASS Tax Free Day

august`s botm... survey says!!!

Preschool Deluxe Action Train Table with Lid

WHAT`S NEW!

File - New Hampshire Construction Career Days

eCkerd - AEI Capital Corporation

2012 in our annual report

Orange County Convention Center October 9-12