S P E A K E R S

Studio Edo Guerreri & C - Milano
ALDINET S.p.A.
Viale C. Colombo 8 - 20090 Trezzano s/N (Mi) - Italy
Tel. +39 02 48478.1 - Fax +39 02 48403356
www.macrom.it - [email protected]
S
R
EXTREME amplifiers
F
I
E
The road to the future is
paved with great ideas.
And if you bring together
a great idea, top-quality
materials, the latest
technology and a wealth
of experience - the result
is a winner, every time.
EXT. A1DSP
A
M
P
L
I
DSP "Digital Sound Processor"
● 6 channel Input/Output
● Selectable Crossover Filter ,
"Low-High- Band pass"
● Variable Crossover Slope, "6-12-18-24dB"
● Variable Bass Boost, "0-18 at 1dB step"
● 10 Band Equalizer
● Delay Time
● Variable Input sensitivity 250mV to 11000mV
EXT. A3A
EXT. A2PS
500w Power supply
● DC power link control
● DC switching link control
Class A or AB variable power amplifier
● Pure class A or AB final configuration
● 2 ohms load compatible
● Bridgeable mode configuration
● RCA Input Signal
● Gain Control
EXTREME "MODULAR" AMPLIFIER
Extreme: a new concept in amplification.
Overcoming the rigidity of fixed numbers of channels,
power ratings and crossovers.
Total freedom to build a system "tailored" to your needs and
totally adapting it and its acoustic effects to your musical tastes.
Imagination becomes reality... a car audio system that is no
longer a series of assembled products but a total celebration
of creative and acoustic skills.
Extreme amp is a modular amplification system which radically
changes the way a top-notch car audio system is developed
by putting the amplifier at the centre of the system.
Up until now, amplifiers were selected according to the type of
loud speakers used and the required power outputs.
From now on, with EXT.A, the amplifier becomes the true
heart of the system.
To build a tailored sound system, choose the number of channels you want to
handle with the processor unit and then....
● Choose the total wattage required for your system and then decide whether to
use one or more 500 W amplification modules (EXT.A2PS).
● Decide whether to listen to medium and high frequencies in class A or class AB
by selecting this function from the stereo amplifier module (EXT.A3A).
● Connect the mono module (EXT.A4M) dedicated to the subwoofer.
● And to finish off, connect the digital sound processor module (EXT.A1DSP)
and have fun building a tailored sound system, eliminating local disturbance,
creating sophisticated effects and adapting all your system components to the
latest musical tastes. All this is possible using state-of-the-art technologies,
construction systems and attentively selected components.
Model
RMS Output
Powerat 4ohm
Power at 2ohm
EXT DSP
Bridged
Input CH
Output CH
Input Gain
HPF & LPF
6CH
6CH
20Hz-20KHz
20Hz-20KHz
(1Hz Step)
Bass Boost
Gain
Frequency
Q Value
Delay Time
EQ
THD
2
EXT. A4M
Monoblock power amplifier
● Class AB final configuration
● 2 ohms load compatible
● RCA Input Signal
● Gain Control
0-70m Sec
(1m Sec Step)
7Band EQ
Frequency Response
Input Gain
THD
6dB Slope
12dB Slope
18dB Slope
24dB Slope
0-18dB
(1dB Step)
20-150Hz
(1Hz Step)
0.1-9.9
(0.1 Step)
20-20KHz
Q Value
EXT.A3A
2 x 50 W(A)
2 x 100 W(AB)
2 x 100 W(A)
2 x 200 W(AB)
1 x 200 W(A)
1 x 400 W(AB)
20 hZ - 20 khZ
0.2 V - 8 V
0,05 %
EXT.A4M
500 W
EXT.A2PS
500 W Power supply
1,000 W
20 hZ - 20 khZ
0.2 V - 8 V
0,05 %
-18dB/+18dB
0.1-8.9
(0.1 Step)
0,005%
3
M1amplifiers
M2amplifiers
M1A.1500D
● 1500 watts into 2 ohms load
at 0,5% THD
● 900 watts into 4 ohms load
at 0,1% THD
● High efficiency Class D design
● Variable Low pass 24dB/oct x-over
● Variable Sub sonic filter
from 20Hz to 55Hz 24dB/oct
● Adjustable Bass Boost
from 0dB to +12dB at 45Hz
● Phase control from 0° to 180°
● EBC external bass control
● Pre-amplified output
with High pass x-over option
● PWM Mos-Fet power supply
● 20sq.mm power terminals
M2A.500D
● 500 watts into 2 ohms load at 0,5% THD
● 250 watts into 4 ohms load at 0,1% THD
● TO3P transistor on amplifier stage
● Variable Low pass x-over at 24/oct
● Variable Sub sonic filter from 20Hz
to 55Hz at 24dB/oct
● Adjustable Bass Boost from 0
to +12dB at 45Hz
● EBC external bass control
● Pre-amplified Line output
● High level Input (booster In)
● Mos-Fet power supply
● Screws terminals connectors
M2A.290
M1A.2250
● 250x2 watts into 2 ohms load at 0,08% THD
● 125x2 watts into 4 ohms load at 0,01% THD
● High efficiency TO3PL transistor
on amplifier stage
● Variable Low-High-Band pass x-over
at 18/12dB/oct
● Multiplier x10 Frequency cutting
● 90x2 watts into 2 ohms load at 0,1% THD
● 60x2 watts into 4 ohms load at 0,1% THD
● TO3P transistor on amplifier stage
● Adjustable x-over from 30Hz
to 600Hz (x1) 300Hz to 6000Hz (x10)
● Stereo/Mono mode selector (ST/mono Out)
● EBC external bass control
● Pre-amplified Line output
● PWM Mos-Fet power supply
● 20sq.mm power terminals
● Variable Low-High-Band pass x-over at 18/12dB/oct
● Multiplier x10 Frequency cutting
● Adjustable x-over from 30Hz
● Stereo/Mono mode selector (ST/mono Out)
● PWM Mos-Fet power supply
● High level Input (booster In)
● Mos-Fet power supply
● Screws terminals connectors
to 600Hz (x1) 300Hz to 6000Hz (x10)
M1A.4150
● 150x4 watts into 2 ohms load at 0,08% THD
● 75x4 watts into 4 ohms load at 0,01% THD
● High efficiency TO3PL transistor
on amplifier stage
● Variable Low-High-Band pass x-over
at 18/12dB/oct on rear section
● Variable High pass x-over at 12dB/oct
on front section
M2A.490
● 90x4 watts into 2 ohms load at 0,1% THD
● 60x4 watts into 4 ohms load at 0,1% THD
● TO3P transistor on amplifier stage
● Variable Low-High-Band pass
● In/Out mode selector (2/4 ch In)
(ST/Dual mono Out)
● Adjustable x-over from 30Hz to 600Hz
● EBC external bass control on rear section
● Pre-amplified output with High pass
x-over option
● PWM Mos-Fet power supply
● 20sq.mm power terminals
x-over at18/12dB/oct on rear section
● Variable High pass x-over
at 12dB/oct on front section
A
Amplifiers M1 series
Number of channels
Configuration
Total IHF Power
RMS Power 4 ohm Stereo load at 14,4V
RMS Power 2 ohm Stereo load at 14,4V
RMS Power 4 ohm Bridged load
Frequency response (+0/-1dB)
Signal to noise ratio
Total harmonic distortion
Input sensitivity
Input impedance
X-over type (variable -Fix)
X-over frequency & filter slop (High-pass)
X-over frequency & filter slop (Low-pass)
Sub sonic filter
Bass Boost
Pre-output (By-pass/Low Pass/High pass)
EBC External Bass Control
High level input
Dimensions
4
Nº
Ch
W
W
W
W
Hz
dB
%
mV
Ohm
Hz/dB
Hz/dB
Hz/dB
db/Hz
mm
M1A.1500D
1
"1"
3500
900x1
1500x1
30 - 330
>95
0,5
200 - 8,000
22,000
variable
30 to 300/24
20 to 55/24
0 to 12 @ 45
HP or Full
YES
250 x 55 x 430
M1A.2250
2
"1-2"
1100
125x2
250x2
500x1
10 - 30,000
>100
0,1
200 - 8,000
22,000
variable-x1/x10
30-600 / 300-6000
30-600 / 300-6000
BP
YES
250 x 55 x 360
M1A.4150
4
"2-3-4"
1400
75x4
150x4
300x2
10 - 50,000
>100
0,1
200 - 8,000
22,000
variable
30 to 600/12
30 to 600/18
BP/HP
YES
250 x 55 x 360
M
P
Amplifiers M2 series
Number of channels
Configuration
Total IHF Power
RMS Power 4 ohm Stereo load at 14,4V
RMS Power 2 ohm Stereo load at 14,4V
RMS Power 4 ohm Bridged load
Frequency response (+0/-1dB)
Signal to noise ratio
Total harmonic distortion
Input sensitivity (RCA / High Level)
Input impedance (RCA / High Level)
X-over type (variable -Fix)
X-over frequency & filter slop (High-pass)
X-over frequency & filter slop (Low-pass)
Sub sonic filter
Bass Boost
Pre-output (By-pass/Low Pass/High pass)
EBC External Bass Control
High level input
Dimensions
● In/Out mode selector (2/4 ch In)
(ST/Dual mono Out)
● Adjustable x-over from 30Hz to 600Hz
● High level Input (booster In)
● Mos-Fet power supply
● Screws terminals connectors
L
Nº
Ch
W
W
W
W
Hz
dB
%
V
Ohm
Hz/dB
Hz/dB
Hz/dB
db/Hz
mm
I
F
M2A.500D
1
"1"
1100
300x1
500x1
10 - 330
>95
0,1
0,2-8 / 1-10
22k - 100
variable
30 to 300/24
20 to 55/24
0 to 12 @ 45
Full
YES
YES
225 x 50 x 280
I
E
M2A.290
2
"1-2"
400
60x2
90x2
180x1
10 - 30,000
>95
0,1
0,2-8 / 1-10
22k - 100
variable-x1/x10
30-600 / 300-6000
30-600 / 300-6000
YES
225 x 50 x 190
R
S
M2A.490
4
"2-3-4"
800
60x4
90x4
180x2
10 - 50,000
>95
0,1
0,2-8 / 1-10
22k - 100
variable
30 to 600/12
30 to 600/18
YES
225 x 50 x 280
5
S
R
E
K
A
EXTREMESPEAKERS
EXT.MW6
Die-cast aluminum basket with gum chrome effect
● Magnesium cone for smooth frequency response
● Cone phase plug
● 1, 1/4" Aluminium voice coil former for high efficiency and
power handling
● 8 pair Neo magnet for maximum energy transfer
● Copper ring on pole piece to reduce distortion
● Vented spider to prevent compression
● Screws terminal connector
● Packaging in aluminum case
●
A stroke of genius made reality, a complete series of separate
components (woofer, midwoofers, midrange and tweeter)
created to be at the real top of the acoustic market.
EXT packaging in aluminum case
E
In the high-tech dream
dimension, MACROM speakers lead the way to the
sound of the future.
Constant research into every
aspect of speaker materials
and design makes for
outstanding sound quality.
That’s the MACROM
approach to speaker
systems: masterly built,
easy to install, MACROM
speakers use a unique
technological approach to
deliver unbeatable sound
for every system from
the simplest to the top of
the range.
EXT.MD4
EXT.MW5
EXT.W6
Die-cast aluminium basket with gun
chrome effect
● Magnesium cone for smooth
frequency response
● Cone phase plug
● 1" Aluminium voice coil former
for high efficiency and power handling
● Barium Ferrite magnet for maximum
energy transfer
● Vented spider to prevent compression
● Screws terminal connector
● Packaging in aluminum case
●
Die-cast aluminum basket with gum
chrome effect
● Magnesium cone for smooth frequency
response
● Cone phase plug
● 1, 1/4" Aluminium voice coil former
for high efficiency and power handling
● 8 pair Neo magnet for maximum
energy transfer
● Copper ring on pole piece to reduce
distortion
● Vented spider to prevent compression
● Screws terminal connector
● Packaging in aluminum case
●
S
P
●
EXT.T28
Aluminum body tweeter
Neodymium magnet with reversible energy
● Tweeter dome with hand-stamped anti resonance rim
● Neoprene surround for controlled cone motion
● 1. 10" vented voice coil former
● Ferrofluid-free magnet system
● Acoustic volume for low-resonance
● Packaging in aluminum case
●
●
6
Speakers EXT series
Type
Size
Number of ways
Frequency response
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Resonant frequency
Vas
Q/Ts
Installation depth
Magnet material
mm-inces
Nº
Hz
dB/m
ohm
W
Hz
L
mm
EXT.T28
tweeter
281
770-25000
90
4
200
770
18 - ø44
Neodymium
EXT.MD4
midrange
100-4”
1
120-4500
88
4
120
134
0.9156
0.8954
48
Barium ferrite
Die-cast aluminium basket with gum
chrome effect
● Magnesium cone for smooth frequency
response
● Rubber dust cap
● 1, 1/4" Aluminium voice coil former
for high efficiency and power handling
● 8 pair Neo magnet for maximum
energy transfer
● Copper ring on pole piece to reduce distortion
● Vented spider to prevent compression
● Extended vented pole pice
● Screws terminal connector
● Packaging in aluminum case
EXT.MW5
mid woofer
130-5”
1
50-2500
91
4
220
105
2.2170
0.4624
61
8 pair neomagnet
EXT.MW6
mid woofer
160-6 1/4”
1
45-2500
90
4
220
72
5.5873
0.4063
66
8 pair neomagnet
EXT.W6
woofer
160-6 1/4”
1
45-1000
90
4
220
80
7.9309
0.7111
70
8 pair neomagnet
7
M1 speakers
SYSTEMS
M1S systems
are an extraordinary expression of
the Macrom philosophy.
A “younger brother” derivation of
the Extreme systems, they are
aimed at users looking
for a slightly more aggressive
acoustic profile.
These are superb products, built
with high-quality innovative
materials, designed
for users who demand in-car
entertainment with unlimited
performance and outstanding
musical quality.
M2 SPEAKERS
M2S.61
SYSTEMS
M2S systems are based on
the principle that even those who
do not want to modify their car
interiors have the right to enjoy
the best in listening quality.
Simple installation, high efficiency,
great power delivery and music
quality make M2S the optimal
solution for upgrading a standard
car stereo system into a mobile
concert hall.
M2S.41
M2S.51
COAXIAL
M1S.51
M1S.61
Die-cast aluminium basket
Honeycomb cone for smooth frequency response
● Sewed cone for high resistance
● 1, 1/4" Aluminium voice coil former for high efficiency and power handling
● Barium Ferrite magnet for maximum energy transfer
● 1" Silk Dome tweeter offers smooth high frequency response
● Neodymium magnet on tweeter for increased sensitivity
● Ferrofluid voice coil cooling
● Flush mounting and angle mounting accessories included
●
●
S
P
M2C.61
It would be misleading to describe
M2C as simple coaxial speaker:
they are, in fact, the integration
of an M2S system into a single
speaker, as always without
compromising on the selection
of materials, and maintaining the
highest levels of music quality and
power. The result is a range of four
speaker models with extremely high
acoustic performance and simple to
install, owing to a ‘basket’ format
adaptable to all standard speaker
housings.
E
A
K
E
M2C.41
M2C.51
R
S
M2C.691
Speakers M1S series
Type
Diameter
Number of ways
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Frequency response
Installation depth
mm-inces
Nº
dB/m
ohm
W
Hz
mm
M1S.51
System
130-5”
2
89
4
160
45 - 22000
58
M1S.61
System
160-6 1/4”
2
90
4
160
40 - 22000
60
Speakers M2S series
Type
Diameter
Number of ways
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Frequency response
Installation depth
Speakers M2C series
Type
Diameter
Number of ways
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Frequency response
Installation depth
8
mm-inces
Nº
dB/m
ohm
W
Hz
mm
M2S.41
System
100-4”
2
88
4
180
80 - 25000
48
M2S.51
System
130-5”
2
89
4
200
65 - 25000
53
M2S.61
System
160-6 1/4”
2
90
4
220
60 - 25000
66
mm-inces
Nº
dB/m
ohm
W
Hz
mm
M2C.41
Coaxial
100-4”
2
89
4
180
90 - 25000
48
M2C.51
Coaxial
130-5”
2
90
4
200
65 - 25000
53
M2C.61
Coaxial
160-6 1/4”
2
90
4
220
60 - 25000
66
M2C.691
Coaxial
152x228-6x9”
3
91
4
300
40 - 25000
88
9
M3 SPEAKERS
M3S.61
SUBWOOFERS
A perfect car audio system must be able
to deliver a deep, powerful bass.
The M1W range, with its robust
aluminium basket, the Double Voice Coil
structure and the sewed honeycomb cone, is based
on this principle. Woofers designed to be used in
sealed or vented enclosures, they are extremely
powerfull, accurate, sensitive,
efficient and capable of cleanly reproducing even the
lowest frequencies. They form the ideal partner
to any high-end system.
SYSTEMS
M3S.41
M3S systems are the point of entry for
those wishing to experience
the extraordinary world of quality in-car
audio. Simple in design, but drawing
upon Macrom’s great experience, they
are easy to install in any type of car,
giving perfect results just from the
output of a normal car radio. Powerful
and dynamic,available in three standard
sizes, M3S systems have an incredible
price/performance profile making them
competitive at all levels of the market.
M3S.51
M3C.61
M1W.1544
● Diecast aluminium basket
Double aluminium voice coil for high efficiency
and power handling
● Sewed honeycomb cone for smooth frequency
response and high resistance
● Double barium ferrite magnet for maximum energy transfer
● Double spider
● Double wave rubber suspension for deep frequency response
● Extended vented pole piece
● Vented spider
● Designed for small sealed and vented enclosures
●
COAXIAL
M3C.41
Like the M2C range,
the M3C models are also derived from
the extreme integration of M3S
systems into a single speaker.
With exceptional price/performance and
ease of installation, they are driven
solely by the car radio amplifier
to deliver very high acoustic standards,
making M3C coaxials the perfect
replacements for the original speakers
and the ideal first step into the world
of quality car audio.
M3C.51
M1W.1044
M1W.1244
M3C.691
S
Speakers M3S series
Type
Diameter
Number of ways
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Frequency response
Installation depth
Speakers M3C series
Type
Diameter
Number of ways
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Frequency response
Installation depth
10
P
mm-inces
Nº
dB/m
ohm
W
Hz
mm
M3S.41
System
100-4”
2
88
4
160
80 - 25000
42
M3S.51
System
130-5”
2
89
4
180
70 - 22000
48
M3S.61
System
160-6 1/4”
2
90
4
200
65 - 22000
58
mm-inces
Nº
dB/m
ohm
W
Hz
mm
M3C.41
Coaxial
100-4”
2
89
4
160
90 - 25000
42
M3C.51
Coaxial
130-5”
2
90
4
180
80 - 25000
48
M3C.61
Coaxial
160-6 1/4”
2
90
4
200
65 - 25000
58
E
M3C.691
Coaxial
152x228-6x9”
3
91
4
250
50 - 25000
80
A
K
E
Sub Woofer series
Model
Type
Diameter
Number of ways
Frequency response
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Resonance frequency
Installation depth
mm-inces
Nº
Hz
dB
ohm
W
Hz
mm
R
M1W.1044
Sub-woofer
250-10"
1
25 - 800
88
4
600
42
162
S
M1W.1244
Sub-woofer
300-12"
1
25 - 800
89
4
800
34
162
M1W.1544
Sub-woofer
380-15"
1
25 - 800
89
4
1000
27
179
Model
Re
Qms
Qes
QTS
Le
Vas
Mms
BI
ohm
mH
liters
grams
tesla-M
M1W.1044
3.6
6.2
0.7
0.62
1.44
23
124
8.7
M1W.1244
3.6
7.7
0.61
0.56
1.44
71
138
8.9
M1W.1544
3.6
8.5
0.72
0.67
1.95
130
274
10
11
SUBWOOFERS
M2W
M2W.124
M2W woofers are of course the perfect
combination with M2 amplifiers
and speakers.
Designed to be used in sealed enclosures
or bass-reflex cabinets, they offer
extremely high power delivery,
adaptable to any installation requirements.
The combination of a polypropylene cone
(aluminium treated), the aluminium voice
coil and a powerful magnet assembly,
make them the ideal solution for those
demanding exceptional sound performance.
M3 ENCLOSURES
M3E enclosures are designed to deliver deep, clean, powerful bass.
Available now in two versions: sealed and bass reflex.
Their compact size and shape, designed to fit most car boots, allows
space-saving installation. Easy to install and, if necessary, remove,
M3E enclosures are the quickest and easiest way to add low-frequency performance to a system.
M3E.10S
M3E.12S
10”-12” Subwoofer sealed enclosure
Sealed cabinets
Max. power handling 500-600W
● 25 mm tick speaker board
● screw terminals for enclosure connection
● protection bars
●
●
M2W.104
M3W
M3W.124
M3W woofers are the perfect entry-level
products for those taking their first steps into
the world of real car audio.
The same Macrom musical approach that
distinguishes its top-range models, plus the
ability to deliver deep, solid
sensations, make M3W the ideal solution for
users wanting to experience what a real
high-performance system can do.
Welcome to the world of real bass...
M3E.10V
M3E.12V
10”-12” Subwoofer vented enclosure
Bass reflex cabinets
Max. power handling 500-600W
● 25 mm tick speaker board
● screw terminals for enclosure connection
● protection bars
●
●
M3W.104
M2 Sub Woofer series
Type
Diameter
Number of ways
Frequency response
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Resonance frequency
Installation depth
mm-inces
Nº
Hz
dB
ohm
W
Hz
mm
M2W.104
Sub-woofer
250-10”
1
25-800
88
4
500
26
131
M2W.124
Sub-woofer
300-12”
1
25-800
89
4
600
25
152
M3 Sub Woofer series
Type
Diameter
Number of ways
Frequency response
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Resonance frequency
Installation depth
S
12
mm-inces
Nº
Hz
dB
ohm
W
Hz
mm
P
M3W.104
Sub-woofer
250-10”
1
25-800
88
4
400
24
109
E
M3W.124
Sub-woofer
300-12”
1
25-800
89
4
500
22
128
M3 Enclosurs series
Type
Diameter
Number of ways
Frequency response
Sensitivity (1W1M)
Nominal impedance
Max. power handling
Resonance frequency
A
K
E
M3E.10S
Sealed enlosure
250-10”
1
30 - 400
89
4
500
-
mm-inces
Nº
Hz
dB
ohm
W
Hz
R
M3W.12S
Sealed enlosure
300-12”
1
30 - 400
89
4
600
-
M3E.10V
Vented enclosure
250-10”
1
25 - 400
89
4
500
-
M3W.12V
Vented enclosure
300-12”
1
25 - 400
89
4
600
-
S
13
K
POWER KITS
POWER CABLES
LINE CABLES
● Conductors in copper tinned with
low oxygen content to avoid oxidation
● White silicon jacket
● Multi-strand twisted structure to
minimize the skin effect and reduce
voltage drops. In addition to their high
specifications, the new M-Network
power cables also incorporate a red
little removable wire. The possibility
to leave or to remove it allows these
cables to be used and recognised both
as positive and negative lines.
One cable, three dimensions –
to satisfy every need.
R
M2
O
M1
W
T
E
● Copper tinned strands with
ultra-low oxygen content
● Twisted wire structure for more
efficient transfer at all frequencies
without any drop in quality
● Very low inductance to avoid any
variations in load on the amplifier
(speaker impedance + cable
impedance, which, in many cases,
can even approach 1 ohm) and,
as a result, power supply
● White silicon jacket
M3
M1 LINE CABLE
● Gold-plated RCA terminals ● Twisted – balanced – double
shielded cable ● Remote wire ● Silk jacket
N
SPEAKERS CABLES
MPK25 (for high power amps)
● 6m of 25sq.mm power cable
● 10 m of 1.5 sq.mm speaker cable
● 1 new 5 m M2 five meter M2 signal cable (M2-LC5)
● 1 mini-reed fuse holder with 60A fuse
● 2 Gold plated ring terminals & Tie – 1 pai fork terminals
(MC5-5F)
MPK21 (for high power amps)
● 6m of 20sq.mm power cable
● 1 five meter signal cable with Metal connector
and remote wire
● 1 fuse holder for glass fuse with 60A fuse
● 2 Gold plated ring terminals & Tie
MPK31 (for high power amps)
● 6m of 10sq.mm power cable
● 1 five meter M3 signal cable with remote wire
● 1 fuse holder for glass fuse with 30A fuse
● 2 Gold plated ring terminals & Tie
MPC10
10 sq.m
positive/negative
power cable,
100 m spool
MPC20
20 sq.m
positive/negative
power cable,
50 m spool
MPC35
35 sq.m
positive/negative
power cable,
25 m spool
MSC1.5
1.5 sq.mm high
high performance
speaker cable
200 m spool
M1LC-1 1 meter stereo cable with RCA terminal
M1LC-3 3 meter stereo cable with RCA terminal
M1LC-5 5 meter stereo cable with RCA terminal
M2 LINE CABLE
● Gold-plated RCA terminals ● Twisted – double shielded cable
● Remote wire ● White silicon jacket
DISTRIBUTORS
PROTECTION
M2LC-1 1 meter stereo cable with RCA terminal
M2LC-3 3 meter stereo cable with RCA terminal
M2LC-5 5 meter stereo cable with RCA terminal
M3 LINE CABLE
● PVC RCA terminals ● Twisted – single shielded cable
● Remote wire ● White silicon jacket
MPT20
MFD-4
INTERFACE
Careful design, gold-plated connections,
efficient power management and reliable
safety devices are the features of the
high-performing protections in the
M-Network range.
M2
M2Y
These adapters have the same type of cable and
connectors as the M2 signal cables
M2Y-1F
Y-shaped signal adapter cable, 1 female 2 male
14
CONNECTORS
MFH-1
M3-1 1 meter stereo cable with RCA terminal
M3-3 3 meter stereo cable with RCA terminal
M3-5 5 meter stereo cable with RCA terminal
M3
Often, especially during musical peaks, the power supplied
by the battery may not be sufficient for the amplifiers,
which thus have inadequate transient response. The Tanks
are available in 1 farad size, with or without digital voltmeter.
MSC2.2T
Twisted high density
speaker cable,
for range-topping
acoustic performance
2.2 sq.mm double
twisted pair conductor,
transparent sheath and
100 m spool
MBTP35
MFH-A
CAPACITORS
MSC3.5
3.5 sq.mm high
high performance
speaker cable
100 m spool
M2Y-1M
Y-shaped signal adapter cable, 1 male 2 female
M3Y
These adapters have the same type of cable
and connectors as the M3 signal cables
MCAP-1D
1 farad capacitor with digital voltmeter
M3Y-1F
Y-shaped signal adapter cable, 1 female 2 male
MCAP-1
1 farad capacitor
M3Y-1M
Y-shaped signal adapter cable, 1 male 2 female
MFH-A
MFA-100
MFA-200
MFA-300
Reed fuse-holder, with digital voltmeter
100 amp reed fuse
200 amp reed fuse
300 amp reed fuse
MFH-1
MF-31
MF-41
MF-61
MF-81
Mini-reed fuse holder, waterproof
30 amp glass fuse
40 amp glass fuse
60 amp glass fuse
80 amp glass fuse
MFD-2
distributor/fuse-holder with
blue power led 1 input
and 2 outputs
MFD-4
distributor/fuse-holder
with blue power led
with 1 input and 4 outputs
MPS 14
current distributor with
1 input and 4 outputs
MPS 23
current distributor with
2 inputs and 3 outputs
MPT10
10 sq.mm eyelet power
terminal
MPT20
20 sq.mm eyelet power
terminal
MPT35
35 sq.mm eyelet power
terminal
MBTN35
Negative, multiple connection
battery terminal
MBTP35
positive, multiple-connection
battery terminal
MBTP
positive battery terminal
with connector
MBTN
negative battery terminal
with connector
MC5-5F fork connector for 5 sq.mm
cable, with 5 mm
connection hole
MC5-10F fork connector for 10
sq.mm cable, with 5 mm
connection hole
MC5-20F fork connector for 20
sq.mm cable, with 5 mm
connection hole
MC8-20F fork connector for 20
sq.mm cable, with 8 mm
connection hole
MC8-5R eyelet connector for 5
sq.mm cable, with 8 mm
connection hole
MC8-10R eyelet connector for 10
sq.mm cable, with 8 mm connection
hole
MC8-20R eyelet connector for 20
sq.mm cable, with 8 mm connection
hole
15