Trapped The Nut On The Engine End Which

Transcription

Steering Systems, and Storage Boxes
TELEFLEX/MORSE SAFE-T QUICK CONNECT (QC) STEERING SYSTEM
The Safe-T System is the OEM choice for safe, simple, reliable steering for boats up
to 24 feet range. To enhance the simplicity of this design, Teleflex/Morse offers the
Safe-T Quick Connect system. This system does not require tools to connect the cable
to the helm, therefore reducing installation time up to 50%. Teleflex/Morse has also
trapped the nut on the engine end which saves time chasing coupler nuts during
engine installation. 8’ through 20’ cables available in stock.
APPLICATION:
• Boats up to 24 feet
• Steering wheels up to 16”
• Single Engines
compare at $249.99
A.K.’s Price $199.00 (with wheel)
Without Steering Wheel $169.00
• O/B Runabouts
• Bass Boats
• Pontoon boats
• Small cruisers
*New Model #840
Mechanical steering system designed so operator may be positioned in the front of boat.
Rated for outboard engines not to exceed
70hp. SS rotating drum encased in nylon housing. SS mounting hardware
Length Sugg. Ret. A.K.’s Price
8’ $329.99 $279.99
9’
10’
11’
12’
13’
14’
15’
Aluminum Pedestal
This heavy aluminum pedestal works well on many jon
boats. It has one side open for storage.
It is 14” high and is heavily reinforced for seat mounting.
A.K.’s price
$79.99
Part# AK1 plate $24.99
15" wide x 18" long
Alumacraft Side Livewell or Storage
Alumacraft
Pedestal Box
Top 19" Long x 14" Wide x 11" High
Bottom 12" Long x 14" Wide
5 gallon
Build at an angle to fit side of boat.
A.K.’s price
Can be used as a pedestal box, storage box,
or livewell. Box has a
lockable hasp.
Base of box 16" x 16",
top of box 14" x 14", A.K.’s price
and 13" high.
$179.99
Alumacraft Side Storage or Livewell Box
Fits most boats for dry storage or can be developed into livewell.
Angled to fit side of boat. Available in two models:
Flat bottom or angled bottom for modified vee hull.
Storage Box
12” High
15” Wide
30” Long
15 gallon
$99.99
A.K.’s Price $209.99
Alumacraft Side Mount Gun Box
Angled to fit the side of the boat.
60" Long, 12" Wide and 11" High
A.K.’s price $379.99
Visit our website to see a larger selection of consoles, seat mounts, trolling motor mounts etc.
www.akmccallum.com
38
Side and Center Consoles
Alumacraft Side
Console
Lowe Steering Side Console
This console, manufactured by Lowe, will fit most
aluminum boats. It is 24” wide and the height is
adjustable from 21” to 32”. An aluminum bracket
is also included for mounting an outboard motor
control box. This console is rugged and very
functional. The 24" piece of aluminum provided can
be cut and mounted to ribs so the adjustable leg
can anchor to it.
Fits most Alumacraft and
many other boats. It has an
adjustable leg for height
adjustment, control box
mount, bars to go between
ribs and mounting fasteners.
Face of console is backed
with thick plywood
Windshield for Lowe console $99.99
Windshield for Alumacraft Console $79.00
Alumacraft Center Console
Lowe Center Console
This is the perfect center console for aluminum boats
over 14 feet. The front box can be used as dry
storage or turned into a live-well. It is 30” high,
33” in length, 19” wide, and the seat height is 15.”
This is the perfect center console for aluminum
boats up to 17 feet. It is 19" wide and 13"
deep. 30" High
Windshield $99.00
Grab Rail $149.00
Sea Ark Alaskan
Console
Designed for stand up
steering. Takes up very
little room. 40" High, 18"
Wide, and 12" Deep.
Windshield and Grab Rail
Not Available
Alweld Center Console
Sea Ark Flat Top Center Console
A.K.’s Price
(Console Features Storage Tray Underneath)
32" High
22" Wide
17" Deep
Windshield
Grab Rail
This is the perfect center console for aluminum boats over
17 feet. It is 38" high, 24" wide and 19" deep.
A.K.’s Price
$299.00
$119.00
$249.00
$449.00
Windshield $89.00
Grab Rail $149.00
Visit our website to see a larger selection of consoles, seat mounts, trolling motor mounts etc.
www.akmccallum.com
39
Trolling Motor and Seat Mounts
Alumacraft Trolling Motor Mount
An Easy to install trolling motor mount to fit
Alumacraft Jon boats and may fit other brand boats.
3 Sizes in stock.
(#1) Fits 1036, 1236, 1436 LT. WT. – 15" Long, 4 1/16" High
(#2) Fits 1436, 1442, 1542 – 22 1/2" Long, 4 1/8" High
(#3) Fits 1448, 1648 – 24" Long, 5 5/8" High
ea.
Trolling Motor Mounts
(For Lowe/Roughneck Jon Boats)
These aluminum jon boat trolling motor mounts are manufactured
by Lowe/Roughneck to make mounting a foot control motor quick
and simple. Height is adjustable.
(#1) Flatbottom (#2) Sharper V (#3) Mod-V (pictured) Flatbottom mount installed
with motor. (For dimensions on mounts, go to our website.) A.K.’s price $59.99
Alumacraft Jon Boat Seat Clamp
(Shown with optional swivel.) Available in 13”, 16” or 19” widths. Fits seats only with lip or overhang.
Seat mount $31.99
Swivel
$7.99
Lowe Seat Mount
This is the seat mount we highly recommend for mounting seats in your jon boat. It is available in five sizes
(12”, 14”, 16”, 18”, 20” and 22”) for different width seats. The mount slides down over the bench seat and is
screwed into both sides in several places. The swivel seat is installed on the mount before it is attached to the
bench seat. These mounts are three inches higher than the bench seat and will not pull out.
Boater Sports Sure-Mount Seat Bracket
All aluminum, durable, lightweight construction
Part#BS70 $28.99 15" Long Kit Part# BS71 $29.99 33" rail only
Part#BS73 $39.99 33" Long Kit Part# BS72 $12.99 Slide Bracket
Aluminum Reinforcement Plate
Part#AK4 $19.99 11" W x11" L 2" Lip
Part# AK3 $27.99 12" W x14" L 2" Lip
Part#AK2 $29.99 12" W x17" L 2" Lip
Alweld Seat Base
Part#MSM
Seat Mount
Seat Swivel shown
($7.99)
A.K.’s price
Stainless Steel Base
$27.99
7"x7"
6"x8"
4"x8"
Part#AK5
12"x12"
plate $15.99
Alweld base Shown
A.K.’s price
A.K.’s price
$27.99
3 Sizes
Aluminum Reinforcement Plate
Magic Seat Mount
Round Cast
Aluminum
Base
$29.99
Aluminum Pedestal Pole
6”
11”
All Lengths13”
$15.9916”
40
$27.99
Seat Spider
$12.99
Stainless Seat Spider $29.99
1000
R
E
V
O
S IN
SEAT K
STOC
Features:
rugged
one-piece
plastic seat
Colors: white,
green, gray
Model:
Action
5450
A.K.’s price
$17.99
Deluxe High Back
Model:
Wise 1062 PLS
Colors:
Brown/Tan
White
16 1/2" Wide
15" Deep
24" High
Boat Seats
CHECK OUR WEBSITE TO SEE OUR FULL SELECTION
OF SEATS. WE HAVE LARGE SHIPMENTS OF SEATS
ARRIVING OFTEN AND OUR SELECTION CHANGES.
Features:
fold-down
plastic seat
Colors:
white, green,
gray Acorn
Model:
Wise 350
15”H
20”W
17”D
A.K.’s price
$31.99
Features:
deep padded
upholstered
seat with
diamond
pattern and
plastic base
Colors:
green, gray,
red, brown,
blue, white &
charcoal
Economy Fold
Down Seats
Plastic Base &
Back 19" High x
16" Wide x 14"
Deep
Econo High Back Seats
16" W x 14" D x 21" H
Colors: white,
green, blue,
charcoal, navy,
chestnut & gray
A.K.’s price
$34.99
All-Weather
High Back Seat
Tempress Model #
45616
A.K.’s price
$89.99
Tempress
Model #
45613
This seat offers
Tempress quality
at a lower price.
Perfect for an
O.D. Jon Boat.
A.K.’s price
$89.99
Model:
Wise 535 PLS
20”Hx16”Wx15”D
Tempress
Model #
48600
White/Gray
48602
White/Blue
Colors:
Chestnut Only
A.K.’s price
$99.99
Model: Wise 350CN 15”Hx20”Wx17”D
Features: fold-down plastic
seat with nylon camo
cordura pads
Colors: Advantage
Max 4, Mossy Oak,
Gray, Green
A.K.’s price
$47.99
Low-Back
Navistyle™
Tempress
Model # 54681
White
Low-Back
Navistyle™
Tempress
Tempress
Model # 54675
Charcoal/Gray
Perfect match for
Alweld Marsh
Boats and some
Xpress Models
Tempress
Model # 54672
Blue/Gray
Tan/Sand
A.K.’s price
$109.99
Tempress
Fold Down
Camo Bench
Seat
48" Wide
Shadow Grass
or Mossy Oak
Breakup
Moeller Flip Flop
Cooler Seat
50 Qt.
30" Wide
$349.99
72 Qt.
36" Wide
$369.99
A.K.’s price
$109.99
72 Qt.
Camo
$399.99
Wise
Model
WD617LPS
Max 4 or Break
Up Camo
Wise WD 726
High Back
Camo Seat
Mossy Oak or
Max 4 Camo
Used as factory
seat on many
new boats
A.K.’s price
$69.99
A.K.’s price
$319.99
A.K.’s price
$84.99
(Compare At $399.99)
(Compare At
$129.99)
Tempress
High Back
Camo All
Weather Seat
Color: Shadow
Grass
Used as factory
seat in older
G3 & Lowe
Roughneck
boats Condura
All Weather
High Back Seat
Tempress Model #
45622
Mossy Oak Vinyl
Camo
Tempress
Model # 45630
Shadow Grass
Vinyl Seat
Tempress Model #
45623
Shadow Grass
Vinyl Camo
A sharp looking
seat with a black
insert. Used by
many builders
on their 2013 &
2014 boats.
A.K.’s price
$89.99
A.K.’s price
$99.99
A.K.’s price
$129.99
41
Tempress
Mossey Oak
High Back
One of the most
popular seats
from Tempress.
A.K.’s price
$139.99
Trailer Accessories
Bearing Buddy II
This is the original bearing protector that ends the mess of repacking bearings. It
also keeps water out of hubs and makes boat trailer wheels safely submersible.
Model 1980
1” (Fits outer bearing L44643) or 1 1/16” (L44649)
(Fits 95% of Boat Trailers)
Features Blue Ring to control filling and includes bras
Other sizes available
Retail $27.99 A.K.’s price $21.99
Prevents
trailer
wheel
bearing
failure
Bearing Buddy Bra
This plastic cover keeps grease off trailer wheels when bearings are overpacked with grease. They are
available in 3/4” and 1” sizes.
Retail $3.99 A.K.’s price $3.49
Tie Down Straps
These easy to use straps are a must for safe trailering of your boat. These two inch wide straps will keep your boat secure.
8’-10’ $12.9912’-13’ $13.9916’-18’
$14.99
Tongue Jacks
We carry one model of back-saving tongue jacks. The Fulton Eclipse is a new economy model swing-away jack with a corrosion resistant zinc finish. It is rated at 800 lb. capacity, has up to 25” of lift, fits trailer tongues up to 3”x5” and comes with a
6” reinforced poly wheel.
Spare Tire Assemblies
We carry a complete line of bias ply spare tires to fit most any trailer. These pre-mounted
assemblies are ready to go and are priced very reasonably. Don’t be left stranded while
searching for these hard-to-find spares. Be prepared!
Painted Rim
Galvanized Rim
4.80x8B
$33.99
$38.99
5.70x8B
$46.99
$50.99
20.5x8x10B
$86.99$93.99
4.80x12B
$61.99$66.99
5.30x12B
$67.99$72.99
Radial Tire Assemblies
ST175/80R13C
ST205/75R14C
ST215/75R14C
ST205/75R15C
Lug Pattern
5 Lug
5 Lug
5 Lug
5 Lug
Bolts directly on to carpeted
bunk boards. Fits 2’x6’ or
2’x4’ standard bunk boards.
Slide on or off with less effort.
Easy to install.
Size
1-3/4”x17” (8 pieces)
3”x16” (10 pieces)
Galvanized Rim
$124.99
$144.99
$154.99
$164.99
*Other Sizes
in Stock
TIE DOWN MODULAR BUNK
GLIDE-ON’S
TIE DOWN BUNK SLICKS
Mfg. #
86170
86164
Lug Pattern Galvanized Rim
ST175/80D13 (B78X13C)
5 Lug
$104.99
5 Lug
$114.99
ST185/80D13 (C78X13C
$124.99
ST205/75D14(F78X14C 5Lug
ST215/75D14(G78x14C)
5 Lug
$129.99
ST205/75D15(F78x15C)
5 Lug
$149.99
ST225/75D15(H78x15C)
5 Lug
$154.99
$25.99 pack
$36.99 pack
Self centering bunk glide-on’s w/interlocking modular
sections. Designed to fit various bunk board lengths. Ideal
for painted, fiberglass or aluminum boats. Fits 2x6x8 foot
standard bunk boards. Kits includes: 4 ea. 3’ sections, 4
ea. 1’ sections and mounting hardware. Easy to install.
$64.99 pack
Mfg. #
86295
Short Bunk Guide On
Same solid construction as Shipshape’s large model, these short bunk guideAK’s Best Seller
ons are just right for positioning any boat trailer. Bunk is 24” long, covered with
Roller Style Boat Guide On
deluxe marine carpet, and will adjust to angle of your boat. Posts and mounting
Makes boat loading easier. Heavy-duty galvanized steel construction with non-marking 9” rubber brackets are galvanized for rust protection. Height of 21” with side adjustment
roller and end caps already assembled. Height approximately 20” with side adjustment out to 13”. out to 13” from frame. Mount on top of frame for extra height. Sold in pairs.
Sold in pairs. Extra solid mounting for up to 4-1/4” trailer frames included. Posts are pre-punched to Hardware for up to4-1/4” frames included. Posts are prepunched to accept
accept P/N 27630A for raised mounting of taillights.
P/N 27603A light brackets for raised mounting of taillights.
A.K.’s price $104.99 pr.
Post Style Boat Guide On
Bunk Board Style Guide On
Easy to see when backing & centering boat on trailer. Galvanized
steel guide-on posts are covered with high quality PVC tube to protect boat. Sold in pairs. Hardware for up to 4-1/4” trailer frames
included.
40” H adj. out to 13”
60” H adj. out to 19”
$79.99 pr.
$99.99 pr.
Carpeted bunkboards cradle boat and provide proper center loading even in
wind or side current conditions. Boards tilt to hug hull. Posts of 1-1/2” steel
tubing and all ounting brackets are galvanized for rust protection. Marine
grade 2” x 4” x 5 ft. boards covered with high grade marine carpet Distance
between upright post can be adjusted to fit trailer. Height 21”, with side
adjustment out to 13”. Can be mounted on top of frame for extra height. Sold in pairs. Hardware for upto
4-1/4” frame included. Posts are pre-punched to acccept P/N 27630A light brackets for raised mounting
of taillights. Sold in pairs.
42
Marine Accessories
Lowrance® Elite-3x Color Fishfinder
• 3.5", 256-color TFT LCD • LED-backlit color display w/detailed 320Hx240W resolution that's easy to see in full sunlight & from wide viewing angles • Broadband Sounder™ detail easily identifies fish targets, bottom contour, structure detail, bottom hardness, thermoclines & more
• Patentedd Skimmer® transducer w/built-in water temperature sensor can track bottom up to 75mph • Fish I.D. displays fish icons instead of
fish arches to help identify fish targets & includes track and alarm options • Advanced Signal Processing (ASP) reduces the need to manually
adjust settings to see fish, structure & bottom detail more clearly • Pages button allows user to quickly switch between sonar frequency views •
Dedicated quick keys allows user to zoom up to four times the standard view & focus on key fishing areas • Power button doubles as backlight
control to adjust for daylight or nighttime fishing situations • Tilt & swivel bracket
UM380 SOLARA D DSC VHF MARINE RADIO
Compact, sleek 25 Watt VHF radio w/text display to show channel names, radio menu, DSC features & GPS
data. Rugged microphone features Channel 16/9 & triple watch select keys. Includes all USA, International &
Canadian channels. Meets JIS7 submersibles standards. Offers full DSC capability, including Position Send & Request. Features Orange backlit LCD
& keys w/LCD contrast control, NMEA input/output, memory channel scan, large full dot matrix display, NOAA Emergency Weather Alert (including
S.A.M.E.). Receiver spec.: Sensitivity 0.27 uV; Rejection: 70 dB.
Mfg.# UM380 Color White
Mfg.# UM380BK Color Black or White
elix 5 Sonar
H
Helix 5 Sonar GPS
Helix 5 DI GPS
Helix 5 SI GPS
$199.00
$299.00
$349.00
$499.00
Also available Helix 7 ,9,10,12
Call For Pricing
Boat Cushions
These soft, long-lasting cushions make a welcome addition to any boat. They serve as a Coast
Guard approved throwable device on boats
over 16ft. They are available in green, red, white,
blue and camouflage.
Compare at $14.99 A.K.’s price $11.99
AK1 Life Jacket
This Type II foam filled life jacket is Coast Guard
approved. There is one universal adult size and two
children’s sizes (under 50 lbs. and 50-90 lbs.)
Fire Extinguishers
This compact fire extinguisher comes complete
with pressure gauge and
mounting bracket. It is
Coast Guard approved.
Compare at $29.99
ORION Hand Held Red Signal Flares
Meets Coast Guard regulations for all boats for day and night use. These signals are the most economical way to comply with new Coast Guard regulations
which require three pyrotechnic signals. Reusable Clamshell Package with handle and locking tabs. Average candlepower: 700 Average burn time: Nearly 3
min. each (8 min. 54 seconds total)
Adult and Youth Universal Sport Vests
SAFE & SOUND SIGNAL
• Great for the active sportsman looking for style, comfort,
and value
• Roomy pockets to keep fishing necessities close at hand
• Lightweight, durable foam contours to your body and won't
hinder your mobility
• D-ring attachment
COLORSIZE
SPRUCE
YOUTH (50-90 LBS)
SPRUCE
ADULT UNIVERSAL
SPRUCE
ADULT L/3XL
®
MAX-4 HD YOUTH (50-90 LBS)
®
MAX-4 HD ADULT UNIVERSAL
MAX-4 HD® ADULT L/3XL
TAN
YOUTH (50-90 LBS)
TAN
ADULT UNIVERSAL
TAN
ADULT L/3XL
CHEST
24-29"
30-52"
40-60"
24-29"
30-52"
40-60"
24-29"
30-52"
40-60"
HORNS
Meets USCG requirements for recommended boat lengths. Non-flammable for maximum user safety. Contains no CFCS. Deeper
sound. Faster alert time.
8 oz. CANISTER
43
Marine Accessories
Speed XP
Junior
Trolling Motor Plugs and Sockets
This combination
makes a neat and
simple way to wire
a 12 volt trolling
motor. (Features 8
gauge wire)
Boat side socket $13.99
Motor side plug $12.99
Designed for all boats & inflatables
with 1-1/2 to 40 HP motors. Stops
bow rise on all boats including tiller
steering. Stability, control & superior
ride. Improves fuel economy at higher speeds.
Mfg. # Color AK’s discount price
SJR-XP1Black
$49.99
SJR-XP2White
$49.99
SJR-XP3Gray
$49.99
Speed XP
Hydrofoil Stabilizer
Made with SPEED-XP. Patent pending Speed Covers
reduce drag by eliminating water “slap” against the
back side of hole. Hides mounting hardware, giving
the hydrofoil a sleek, OEM, invisible-mount look.
Patent pending StingRay™ logo with Vision-3™ technology,
enhances the look of your boat.
Mfg. #
Color
AK’s discount price
SJR-XP1Black $59.99
SJR-XP2White $59.99
SJR-XP3Gray $59.99
Deluxe Jon Boat Running Light Kit
This is the running light kit that works best with jon boats. It comes complete with stowaway plug-in bow and stern lights, 25 feet of
wire, and a three-way switch. The lights may be stowed away when not in use, with a flush-mounted plug remaining mounted.
For a dependable lighting system, this is the way to go.
A.K.’s price
$89.99
Jon Boat Bilge Pump Kit
This kit contains everything needed to install a bilge pump in your jon boat. Included is a 400 G.P.H. bilge pump, bilge hose, switch,
electrical connectors, wire and an over-the-transom output tube.
A.K.’s price
SeaSense® Bilge Pumps
The SeaSense® submersible bilge pumps are tough enough for any bilge. The
600 GPH and 800 GPH use 3/4" hose and the 1100 GPH uses 1-1/8" hose.
Meets ABYC specification H-22.
Description
600 GPH—$12.99 • 800 GPH—$19.99 • 1100 GPH—$26.99
$42.99
• Quick Release Strainer Base for Easy Cleaning
• Stainless Steel Shaft & Mounting Screws
• 30" Tinned Marine Grade Wire Leads
• Universal Mounting Hole Positions
• Impact Resistant ABS Housing
• Certified Flow Rates
• Ignition Protected
Attwood Sahara Automatic Bilge Pump
This is a 500 gallon per hour pump that can be wired to turn on automatically. It works great when your boat is left in
the water overnight, for example. The S-500 has plenty of pumping power for most jobs. Sized for boats up to approx.
17 ft. It requires a three-way switch and a 3/4” hose.
1100GPH $79.99750GPH $69.99500GPH $47.99
• Works On Any 12V Power Source
SeaSense® Fisherman's Live Bait Aerator
The most versatile aerator pump on the market! For coolers, buckets and livewells. Salt
or fresh water. Super strong suction cups. No drilling, no screws. Completely portable.
Adjustable spray control and telescopic nozzle height keep bait alive longer.
• Impact Resistant ABS Housing
• 30" Marine Grade Tinned Wire
• Telescopes Up To 13-3/4"
SeaSense® LED Switch Panel
Complete with push-button reset breakers, toggle switches, LED indicator lights and marine grade tinned wire. Panel rating: 12V, 40 amp total. Individual circuit 10 amps. Stainless mounting hardware included. Corrosion-free aluminum panel.
Description
4 Gang LED Switch Panel—$34.99 • 6 Gang LED Switch Panel—$42.99
LIGHT
EMITTING
DIODE
• Roto-Molded Construction • Ruled Cutting Board • With Mounting Inserts and Drain Plug
Part #
Capacity
Dimensions in Inches
A.K.'s Price
48280-W
42281-W
42283-W
23 gallons
29 gallons
49 gallons
18"H x 20"D
17"H x 23"D
18"H x 29"D
$109.99
$119.99
$149.99
44
LIGHT
EMITTING
DIODE
Marine Accessories
Solid Brass latch lock for trailer coupler. The coupler cannot be opened or closed when
the lock is in place. 3/4" diameter
Master Lock Armorlock
High powered answer to guarding your trailer on or off vehicles. Revolving case-hardened steel shackle fits openings 1/2” dia. or larger; shackle guard removable to accommodate opening.
Pair of brass keys included. A.K.’s price $13.99
Outboard Motor Lock
Fits the majority of motors secured to transom by means of clamp screws (except certain
Chrysler outboards). Made of case-hardened steel, the tube is 100% vinyl clad against weather, water and corrosion. Features precision marine-brass pin-tumbler locking mechanism. The padlock is double locked against
prying and recessed so tube forms and added case-hardened shield against cutting. Pair of brass keys included.
Battery Boxes
These rugged polypropylene boxes protect your battery. Black in color, they come complete with a tie down strap and
mounting hardware. Three sizes are available.
11”
$9.99 (fits 85 amp batteries)
13”
$9.99 (fits 105 and 140 amp batteries)
Dyer Number/Letter Kit
This kit contains four of each number and letter. The letters are three inches high and meet all N.C. regulations. They
are easy to apply and last for years. They are available in red, black, white and blue.
Fold-up Rigid Ring Drink Holder
This drink holder works great on most jon boats and many other boats. It holds 12-ounce cans and glasses and folds up
when not in use. Available in black or white.
Caviness ABS Paddle
This paddle has a wide, extra tough ABS blade
and a strong aluminum shaft. Lengths available:
4’, 4’6”, 5’, 5’6”.
Aluminum Oar
Really lasts and out performs wood! Advanced blade design is
molded to provide maximum power and minimum slippage for
efficiency 1 1/4" shaft diameter.
• Lightweight And Durable
• Will Not Warp Blade Edge
• Corrosion Resistant Curvature
Aluminum Shaft
• High Impact, Cupped, Molded Blade
Description
6' Oar—9.80
A.K.'s price
7' Oar—11.18
A.K.'s price
Blade Edge
Curvature
Model
$21.99008660
$24.99008670
X-I Kayak Paddle
This ever popular SeaSense original is the best paddle for use
with our Creek boats.
• Two Piece Aluminum construction
• Lightweight, Black Molded Plastic Blades
Blade
Edge
• Adjustable Drip Guards/Foam Rubber
Grips
• Excellent for use with our Creek Boats.Curvature
Oarhorns
Description
Kayak 84"
Kayak 96"
A.K.'s price
A.K.'s price
Our oarhorns by Attwood are the most popular brand we sell. Their 1/2” shaft fits most jon boats.
45
A.K.’s price $7.99 per pair
$24.99
$26.99
Marine Accessories
Driftmaster Rodholders — Holds Rod Securely, Quickest Release Made!
—Fully Adjustable Side-to-Side
—Solid Steel Construction
—Easily Removed For Storage
—Plated Steel Sterns
—Heavy Duty Plastic Coating
—Stainless Stem And Wingnut
Available For All 4” Stern Models
Fight The Fish...
Not The Rod Holder!
Driftmaster’s one step
release sets the hoook
and frees the rod in one
easy motion. That means
Will Special Order and fewer missed strikes!
Pro Series Rod Holders
Pro Series
The choice among saltwater and freshwater anglers. Built wider to hold larger
rod handles. All Pro series holders have
1/2” diameter stems and fit only Pro
series bases.
Li’l Pro
Pro—
Holds
rod tip
in horizontal
position for fishing straight down.
Li’l Pro—5º angle keeps long pole tips
out of the water.
Li’l Pro Series
Just the right size for panfish but tough
enough to handle a “big un.” All Li’l Pro
series holders have 3/8” diameter stems
and fit only Li’l Pro series bases.
A.K.’s Price
$16.99
Everything you need in a rodholder. Adjustable rodholders only give you two effective
fishing positions and they can break, sending your expensive equipment to the bottom
of the lake. The Duo and Li’l duo give you the most effective rod angles and it will
not break...ever! Holds rod tip at 0º with handle in top loop of 30º when handle is in
bottom loop. Comes standard with stainless steel stem & wingnut.
Li’l Troller
Longstem—
Hold rod at 45º trollAll Rod Holders
ing angle. A closed
are available
rear loop grips rod
with 8” stem.
handle securely
Not available on
when experiencing
A.K.’s Price $10.99 Lean-mean rodslack line or rough
holder.
Lantern Holder
water.
A.K.’s
Price
$16.99
• Fits any Pro base
• Plated steel
• T-Bar adjust left to right and locks in place
A.K.’s Price
• Holds lantern over
• Rodholders adjust vertically and left to right
water or in boat
Two rod system $39.99
Includes: 200-B, 7/8” Round T-Bar with 10” lockFour rod system $56.99
ing stem, 214-B bases (rod holders optional)
Rod Rester
• Avoid tangled lines and
broken tips
• Secure rod in vertical position
• Attaches to any Pro or Li’l
Pro stem
No-Swing
Tip
Driftmaster Bases — A Base For Every Mounting Situation
—Machined From Solid Aluminum (Except —Remain Attached To Boat While Holders —No Sharp Edges To Fray Lines
For SSRB-0 & SSRB-1)
Are Easily Removed
Side
V Round
Flush Base
Flat
Square
Star Base
Rail Base
Mount
Base
Rail
Base
Clamp
Li’l Pro—Base surface is
only 3/16” above mounting surface for a low profile look. Mounts with two
1/4” screws.
—Stainless Hardware Included With Clamp Bases
Only. Sold Separately For Other Bases
Round Rail
Universal
Clamp Base
Clamp
Base
7/8” Rails
1” Rails
Li’l Pro—Fits 2” or wider Li’l Pro—Fits 1” or wider
flat surface. Mounts with flat surface. Ideal for ponthree 1/4” dia. screws toon rails. Mounts with two
3/16” bolts.
or bolts.
A.K.’s Price $5.99 A.K.’s Price $5.99
EXP-RHRM Universal Rail Mount Square & Round Rail
• F iberglass-injected nylon construction
• Perfect for boats and pontoons
• Mount accessories to a
rail or grab handles
• All hardware included
Li’l Pro—Fits any size Base
round rail or curved surface. Mounts with two Li’l Pro—Fits up to 1
1/4” Square Rails.
3/16” bolts.
Universal Accessory Mate Fits All Rod
Holders (Shown Mounted on RH401)
EXP-RH302 Compact Deluxe Rod Holder
• Fiberglass-injected nylon construction
• Exclusive Quick Release Base Mount
• ALOCK rod secure ring
• 360 degree adjustable rotation
• Completely adjustable to
multiple vertical or horizontal
positions
• Includes a side or top deck
mounting system
EXP-RH811 Heavy Duty Rod Holder
EXP-RH301 Polished Aluminum Rod Holder
• Unique "Quick Pivot" rod release
• 360 degree adjustable
rotation
• Completely adjustable
to multiple vertical or
horizontal positions
mounting system
EXP-402 Fluted Rod Holder Extension
• Universal rod holder extension
• F iberglass-injected nylon
construction
• Multi-positions, minimizes tangles
• Maximize lure spreads
• Extends height by 8 3/8"
• 360 degree pivoting
• Added height makes rod access easier
SUPER ROD HOLDERS
Universal Accessory Mate fits all Rod Holders. Why have tackle and
tools laying around the boat? Organize them in the area you need
them most; near your rod. Accessory Mate has been organizing
boats for decades. A must
for any versitile fisherman.
• Attaches to all rod holders
• Convenient accessory holes for pliers,
lures, etc.
• Fully adjustable to a variety of positions
• All hardware included
• Quick Release base
• Heavy Duty "O" Ring lock
• 360 degree adjustable
rotation
• Completely adjustable
to multiple vertical or horizontal
positions
mounting system
Li’l Pro—Fits Jon boat gunnels
where vertical holes can’t be
drilled. Can be bent in vice
for difficult mounting angles.
Mounts with two 1/4” screws
or bolts.
EXP-RH401 Stainless Rod Holder
• P olished 240 Marine grade stainless steel
• Fiberglass-injected nylon "Quick-Release"
collar
• Unique "Quick Pivot" rod release
• 360 degree adjustable rotation
• Completely adjustable to vertical or
horizontal positions
• Includes a side or top deck mounting system
Li’l Pro—Clamps to docks,
war eagle and jon boat
gunnels and round rails.
Opens to 1 7/8”.
Li’l Pro—Rod can be adjusted to any angle by turning
base on rail then tightening
clamp wing nut.
(Shown Extended)
A.K.’s Price
$18.99
A.K.’s Price
A.K.’s Price
(Black)
(White)
$8.99ea.
$5.99ea.
Available
in Black
or White
A.K.’s Price
$12.99
*Pliers & Knives
not included
46
A.K.’s Price
$22.99
Marine Accessories
Master Tool Rod Holder
This is a 1-piece flush mount heavy-duty plastic rod holder. A
1-5/8 ID x 9-1/2”H. 3-1/2” x 4-1/4” flange diameter.
Mfg # 447-White
Mfg # 447-Black
Rod Holder
This is a 1-piece flush mount stamped stainless steel rod
holder with full black rubber liner and cap. Mounting
gasket included..
Nylon Cleats
These hard nylon cleats are very strong. They have a black etched finish and will not rust. They have two
pre-drilled holes for mounting and they work very well on jon boats. Three sizes are available.
4 1/4” $1.996” $2.998” $5.99 Economy Hooker Anchor
Super Hooker Anchor
This anchor has excellent holding power in sandy
bottoms. It features a slip ring design to ease retrieving when fouled.
5 lb.
$11.99
This anchor features strong wide flukes that penetrate
quickly and firmly. It is preferred by many coastal fishermen.
$19.99
$27.99
$44.99
$49.99
$64.99
4 lb.
8 lb.
13 lb.
18 lb.
22 lb.
10” $8.99
$14.99
$19.99
$25.99
$29.99
7 lb.
10 lb.
13 lb.
15 lb.
Navy Anchor
A good holding cast iron anchor.
Ideal for rivers and lakes with gravel or stone bottoms.
Painted
Black vinyl coated
5 lb.$7.99
10 lb.$18.99
10 lb.$13.99
15 lb.
$24.99
15
lb.
$19.99
20
lb.
$32.99
20
lb.
$31.99
28
lb.
$47.99
Mushroom Anchor Ideal for anchoring in low wind and current conditions. Heavy plastisol coating (protects
boat finishes)
$15.99
$18.99
8 lb.
10 lb.
Plastic coated
15 lb.
20 lb.
Three-Strand Twisted Nylon Anchor Solid Braid Nylon
Line with Factory Spliced Eve with Anchor Line with
Galv. Thimble
A.K.'s Price Metal Snap
(Perfect for
3/8" x 50'
$12.99
smaller
anchors)
3/8" x 100' $21.99
3/8" x 150' $29.99
A.K.'s Price
1/2" x 100'
$39.99
3/16" x 75' $7.99
1/2" x 150'
$59.99
Folding Grapnel Anchor
Plastic coated
$25.99
$31.99
River Anchor
Especially designed for river and mud bottom
lakes. Great for Pontoon or bass boats. Heavy
plastisol coatings.
12 lb.
15 lb.
20 lb.
30 lb.
This unique fold-up anchor is great for small boats. It has good holding power and takes up little room.
A.K.’s price
1.5 lb. For Boats up to 10'
3 lb. For Boats up to 12'
5 lb. For Boats up to 14'
$7.99
$10.99
$16.99
47
$19.99
$25.99
$34.99
$49.99
Marine Accessories
Plush Marine Carpet
(For Pontoons and other boats)
This is original factory carpet used in many new boats.
Colors available: red, blue, gray, black and beige
A.K.’s price $8.00 per running foot
(carpet is 6 feet wide)
$10.00 per running foot
(carpet is 8 feet wide) for pontoons
(8 1/2 foot also available in stock)
3-M Non Skid Tape
Bunk Carpet
1" — 75¢ Ft.
2" — $1.50 Ft.
4" — $2.50 Ft.
6" — $5.00 Ft.
12" Wide $1.50 per ft.
18" Wide $2.50 per ft.
Clear Coat Waterproof Contact Cement
This cement has proven to be a lasting and easy to use product for installation of carpet.
A.K.’s price $12.99 per quart $33.99 per gallon
Travaco Marine-Tex Repair Kit
Made from epoxy resins and reinforced with high strength fillers, then further
processed with a series of other plastic materials. Bonds to metal plastics,
hard and soft wood, plywood, etc. Hardens to tensile strength of 10,000
lbs. per sq inch.
Non-magnetic, non-rusting and non-corrosive. Kits contain catalyst and
instructions.
Size
Grey
2 oz.
A.K.’s price
14 oz.
White
2 oz.
14 oz.
BIGGER - BETTER - FASTER!
Mossy Oak Shadow
Grass® Camouflage
Stencils - Plus Paint!
New from Styx River® &
Reelfoot Custom Camo®:
Licensed Camouflage Stencil
Kits!
$12.99
$37.99
$12.99
$37.99
Now you too can produce a high quality camouflage paint job
in your own back yard! Stencils are laser-cut for incredible detail
and are the same as those used by manufacturers who paint
Mossy Oak® Brand Camo on your favorite hunting equipment.
Hidin’ Rides with Mossy Oak has never been easier! Camo your
vehicle, ATV, duck boat, tree stands, gun, bow, trailer and more.
Stencils are constructed of Mylar plastic making them solvent
resistant and durable for years of dependable use. Stencil kits
contain extra large 30” stencils, detailed instructions, and the
paint needed to complete small projects (50-70 sq. ft.) or start
large ones!
Contents:
•4 - 12 oz. cans of Krylon® Spray Paint
(2 Black, 1 Med. Brown, 1 Sand Dune)
•1 Grass Stencil 20 1/2” x 30”
•1 Bark Stencil 15” x 30”
•1 Large Spot Stencil 81” x 30”
Camo Patterns in Stock
Mossy Oak Break Up
Mossy Oak Shadow Grass
Advantage Max 4
A.K.’s Price
$99.99 kit
$99.99 kit
$89.99 kit
(Boat shown) Alumacraft 1436 required approx. 8 cans of
spray paint.
Styx River Camouflage Paint
Styx River Camouflage Paint is formulated to give you a flat, durable, nonreflective finish that is rust inhibitive, water resistant, and perfect for reproducing today's licensed camouflage patterns. The color selection is designed to let
you blend with natural settings, breaking up outlines and shapes, using Styx
River's licensed pattern stencil kits.
• Extremely durable on multi-surfaces
• Color formulated to reproduce today's licensed patterns
• Non-reflective
• Designed to create life-like results when blending colors together
• Fast drying under normal conditions
11 oz. Spray Can A.K.’s price $6.99
A.K.’s price $21.99 a qt.
48

Trapped The Nut On The Engine End Which

Transcription

Similar documents

New Procraft packs a punch on a budget

details - Jolt Trust

For sale is barely used 2014 Porta-Bote w/ a 2014 Suzuki 6 HP four

Glastron GS 249 - {ModelName} Charter Brochure

2713 Hot Rod - Watson Gloves

ahem, will everyone please take a seat…

1 - Back Cove Yachts

April - Shipmodelers.com

performance bulletin

media kit - Bauer Trader Media