docFinished End - 6 Square Cabinets
download 
Report Transcription
Finished End - 6 Square Cabinets
i Welcome This Product Specication Guide has been formatted for designing with 6 Square Cabinets®. It contains information for our products in an easy-to-read format. In keeping with our policy of continuous product renement, 6 Square Cabinets reserves the right to change specications in design and materials as conditions require. If you would like further clarication about any of our products, processes, or have suggestions, please contact customer Service. Table of Contents i ii a1 a1 a2 a6 a8 a9 a10 a13 a17 b1 b2 b2 b3 b3 b3 b4 b4 b4 b4 b5 b6 b7 b8 c1 c2 c4 c3 c7 c8 c9 c12 d1 d2 d2 d3 d4 d5 Welcome Warranty Construction & Door Styles Nomenclature Door Styles Wood & Finish Characteristics The Finish Process Standard Cabinet Construction Cabinet Dimensions Drawer Box Dimensions & Placement Shelf Dimensions Construction Modications Finished Ends (FE, FBE) Peninsula (PEN) Increased Depth (ID) Reduced Depth (RD) Matching Interior (MI) Prepped for Insert (PFI) Matching Beaded Back Panel (MBE) Finished Front Only (FFO) Void Door/Drawer Front All (VDA) Aluminum Frame Door Super Sink Base Finished End Pricing Mullion Frame Door (MFD) Standard Cabinets Wall Cabinets Standard Wall Wall Refrigerator Wall Top Hinge Blind Wall Corner Wall Specialty Wall Wood Range Hoods Base Cabinets Standard Base Base Roll-Out Tray Full Height Base Full Height Base Roll-Out Tray Drawer Base Mar 2016 d6 d8 d9 d10 d12 d13 e1 e2 e4 e5 f1 f2 f2 f2 f3 f3 f5 g1 g2 g3 g4 g5 g9 g10 g10 h1 I1 Sink Base Blind Base Corner Base Specialty Base Drawer Inserts Furniture Cabinets Utility Cabinets Tall Cabinets Tall Cabinets Roll-Out Tray Oven Cabinet Vanity Cabinets Sink Base 34½” high Base 34½” high Full Height Sink Base 34½” high Drawer Base 34½” high Combo Base 34½” high Vanity Specialty Accessories Crown Molding Specialty Molding Fillers Panels Corbels & Supports Decorative Doors Valances Decorative Hardware Parts ii New What’s New? Changes & Addtions Discontinued Door Style Copenhagen (a5) Offered only in paint to begin with but will be offered in Oak Espresso (Spring 2016) and Cherry Cognac (Fall 2016). The Copenhagen slab door has the same dimensions as current FOL door styles and is made with high grade MDF to prevent warping and provide a smooth surface for that modern look. Standard Construction Blum® is Now Standard! (a9 & i2) Hinge: Blum Compact with Blumotion® and soft-close is now standard for all FOL and Inset-CH cabinets. Glides: Blum Tandem plus Blumotion is now standard for all drawer boxes and roll-out trays.(except furniture drawers) Modifications Soft Close Door (SCD) Drawer Full Extension (DFX) Both SCD & DFX have been discontinued from the result of Blum now being standard construction. Wood Species New Plain Sawn Oak (a6) Plain sawn oak will be added for the Copenhagen door only, in Espresso. Plain Sawn Oak description has been added in the Wood, Finish & Surface Characteristics section. Information MDF Description (a7) Because Copenhagen core is a high grade MDF a description has been added in the Wood, Finish & Surface Characteristics section. Drawer & ROT Dimensions (13-a14) ROT placement and height dimension charts (a15-a16) Cabinet Shelf Dimensions & Weight Capacity chart (a17) SKUs Tilt-out Tray Sink Base SKUs The Tilt-out Tray SKUs have been discontinued because the addition of the new Super Sink Base mods. SB21-TO SB24-TO SB27-TO SB30-TO SB33-TO SB36-TO SB42-TO Modifications Aluminum Frame Door (AFD) (b5) Super Sink Base Modicaitons (b6) Tilt-out Tray (TOT) Sink Base Liner (SBL) Pull-out Wire Basket (PWB) Towel Bar (TBR) SKUs Super Sink Base SKUs (d7) 2-Tier Cutlery Drawers (d12) Wall Top Hinge Cabinets (c3) Floating Shelves (c9) Mar 2016 iii Consumer Lifetime Limited Warranty Contents i ii a1 a1 a2 a6 a8 a9 a10 a11 a13 a15 a17 b1 b2 b2 b3 b3 b3 b4 b4 b4 b4 b5 b6 b7 b8 c1 c2 c4 c5 c7 c8 c9 c12 d1 d2 d2 d3 d4 d5 d6 d8 d9 Welcome Warranty Construction & Door Styles Nomenclature Door Styles Wood & Finish Characteristics The Finish Process Standard Cabinet Construction Cabinet Overlay Dimensions Frame Opening Dimensions Drawer Box Dimensions ROT Drawer Box Placement Shelf Dimensions Construction Modications Finished Ends (FE, FBE) Peninsula (PEN) Increased Depth (ID) Reduced Depth (RD) Matching Interior (MI) Prepped for Insert (PFI) Matching Beaded Back Panel (MBE) Finished Front Only (FFO) Void Door/Drawer Front All (VDA) Aluminum Frame Door (AFD) Super Sink Base (TOT, SBL, PWB, TBR) Finished End Pricing Mullion Frame Door (MFD) Standard Cabinets Wall Cabinets Wall Refrigerator Wall Top Hinge Standard Wall Blind Wall Corner Wall Specialty Wall Wood Range Hoods Base Cabinets Standard Base Base Roll-Out Tray Full Height Base Full Height Base Roll-Out Tray Drawer Base Sink Base Blind Base Corner Base Mar 2016 d10 d12 d13 e1 e2 e4 e5 f1 f2 f2 f2 f3 f3 f5 g1 g2 g3 g4 g5 g9 g10 g10 h1 I1 Specialty Base Drawer Inserts Furniture Cabinets Utility Cabinets Tall Cabinets Tall Cabinets Roll-Out Tray Oven Cabinet Vanity Cabinets Sink Base 34½” high Base 34½” high Full Height Sink Base 34½” high Drawer Base 34½” high Combo Base 34½” high Vanity Specialty Accessories Crown Molding Specialty Molding Fillers Panels Corbels & Supports Decorative Doors Valances Decorative Hardware Parts iv Consumer Lifetime Limited Warranty 6 Square Cabinets® hereby warrants to the original purchaser, for residential applications only, that all cabinets and accessories, hinges and all drawers, including system hardware, are free from defects in materials and workmanship. This warranty runs for as long as you own your home and begins upon the date of delivery to you. This warranty is expressly limited to repair or replacement of the defective part at the discretion of 6 Square Cabinets and does not include labor for removal or replacement. This warranty does not extend to defects caused by improper handling, storage, installation, assembly or disassembly, intentional damage, product modications, exposure to the elements including humidity which may result in warping or splitting, accidental misuse, abuse or negligence. Natural woods may vary in texture, color and wood grain, and exhibit subtle changes as they age. For example, wood joints may eventually have visible cracking around the joint area and cabinet colors may darken or lighten over time. Sunlight, smoke, moisture, household cleaners and other environmental conditions may cause materials to vary from their original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and are not covered under this warranty. 6 Square Cabinets makes no other warranties other than those set forth herein and all other warranties are hereby disclaimed. The implied warranties of merchantability and tness for a particular purpose are limited in duration to the length of the limited warranty period. The limited warranties set forth herein are restricted to the rst/original buyer and are not transferable thereafter. In no event shall 6 Square Cabinets be legal for incidental or consequential damages to the purchaser or to any third party, including, without limitation, damages arising from personal injury, lost prots, loss of business opportunity, loss of property, economic losses, or statutory or exemplary damages, whether from negligence, warranty, strict liability or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations and exclusions may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. Claims All claims for defective cabinets and accessories must be submitted to 6 Square Cabinets in writing and must specify the defects present in the cabinets and accessories. After 6 Square Cabinets has had an opportunity to inspect the cabinets and accessories, they will, at their discretion, either replace defective cabinets and accessories or repair any defects in the cabinets and accessories. All claims must be submitted to [email protected]. Mar 2016 a1 Standard Construction & Door Styles Nomenclature, Door Styles & Standard Construction If depth and height are not listed in nomenclature, refer below for dimensions. Wall Cabinets: 12” depth (not including door/bumper) Base Cabinets: 34½” height Base Cabinets: 24” depth (not including door/bumper) Utility Cabinets: 24” depth (not including door/bumper) Vanity & Desk Base Cabinets: 21” depth (not including door/bumper) Standard Construction & Door Styles Discrepancies, errors, and omissions may occur between this Specication Guide, design software, and the web based Quoting Tool. Please consult with Customer Service for nal determination of product. 6 Square Cabinets® reserves the right to change and alter its product and/or specications without notication as market conditions require. It is the responsibility of the individual user to update their own Specication Guide and design software. Material dimensions may be nominal based on lumber industry standards. Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 a2 Itasca - Mission Standard Color Kingston - oal harc erlo t Pain ted C age Pain ted M tone eys Pain ted S Pain ted K Pain ted S hale ray Ash Birc hE spre sso Plain Saw nO ak E spre Stra sso ight Gra in O ak T offe Pain e ted Line n La tte G Pain lz ted Wh ite Pain ted Van illa Pain ted G Che rry K afe ogn ac Che rry C Map le S pice C Map le S pice hoc olat eG lz Full overlay door with ¾” solid wood slab drawer front ¾” solid wood, 2” wide mortise & tenon door frame ¼” veneered engineered core plywood with MDF substrate center Decorative hardware required Premier Paint Collection (2 weeks extended lead time) Raised Panel e Ch a rcoa ted Pain Sag Mer lot ted Pain e l ston e ted K ey Pain Pain Pain ted ted S ha le Gra y As h la Pain Pain Pain ted ted Wh ted ted Pain Stra Van il ite n La tt e G lz ak T offe Line Gra ight Saw Plain hE Birc in O ak E nO sso afe rry K Che Che Standard Color Premier Paint Collection (2 weeks extended lead time) Raised Panel Full overlay door with solid wood, raised panel, ve piece drawer front ¾” solid wood, 2” wide mortise & tenon door frame ” solid wood center door panel Painted doors feature MDF substrate center panels l rcoa Ch a ted Pain Sag e Mer lot ted Pain Pain ted tone Key s ted Pain Pain ted Sha le Gra y As ted Pain la Van il ted Pain ite Wh ted Pain Line n La h tte G lz ak T offe ted Pain ight Gra in O spre Stra Plain sso spre hE Birc Che rry K af e ac ogn rry C Che Saw nO ak E olat Cho c pice le S Map pice Standard Color e sso eG lz Decorative hardware required le S Hampton - spre ac ogn rry C pice le S Map Map le S pice Cho cola spre te G sso lz ¾” solid wood, 2” wide mortise & tenon door frame ” solid wood center door panel Painted doors feature MDF substrate center panels Decorative hardware required Map Standard Construction & Door Styles Full overlay door with solid wood, raised panel, ve piece drawer front Premier Paint Collection (2 weeks extended lead time) Mar 2016 a3 Olmsted - Mission Full overlay door with solid wood, reversed raised panel, ve piece drawer front ¾” solid wood, 2” wide mortise & tenon door frame Standard Color Nicollet - oal harc erlo t Pain ted C age Pain ted M tone eys Pain ted S Pain ted K Pain ted S hale ray Ash Birc hE spre sso Plain Saw nO ak E spre Stra sso ight Gra in O ak T offe Pain e ted Line n La tte G Pain lz ted Wh ite Pain ted Van illa Pain ted G Che rry K afe ogn ac Che rry C Map le S pice C Map le S pice hoc olat eG lz ¼” veneered engineered core plywood with MDF substrate center ” solid wood center drawer front panel Decorative hardware required Premier Paint Collection (2 weeks extended lead time) Raised Panel Full overlay door with ¾” solid wood slab drawer front ¾” solid wood, 2” wide mortise & tenon door frame Renville - l Mer lot e Ch a rcoa ted Pain ted Pain Sag ted Pain Pain ted S ha le h ted Gra y As ted Pain Pain la Van il ted Pain ite Key ston e lz tt e G Pain Pain ted ted Wh Line in O ak E ight Saw Stra Plain Birc Gra nO sso hE rry K spre afe ac Che ogn rry C Che n La spre ak T offe e sso lz te G cola Cho pice le S Map pice le S Map Standard Color Premier Paint Collection (2 weeks extended lead time) Raised Panel Mar 2016 o al Mer lot Cha rc ted Pain ted Pain Sag e Pain ted tone Key s ted le Sha Premier Paint Collection (2 weeks extended lead time) Pain ted Gra y As Pain ted Pain la Van il ted Pain ite Wh ted Pain ted Line n La h tte G lz ak T offe Pain Stra ight Gra in O spre Plain sso spre hE Birc rry K af e ac Che ogn rry C Che Saw nO ak E olat Cho c pice le S Map pice le S Map Standard Color e sso eG lz Full overlay door with ¾” solid wood slab drawer front ¾” solid wood, 2” wide mortise & tenon door frame ” solid wood center door panel Painted doors feature MDF substrate center panels Decorative hardware required Standard Construction & Door Styles ” solid wood center door panel Painted doors feature MDF substrate center panels Decorative hardware required a4 Ramsey - Miter Full overlay door with ¾” solid wood slab drawer front ¾” solid wood, 2” wide miter joint door frame Standard Color Pain ted C Pain ted M erlo t harc oa l e age eys ton Pain ted S Pain ted K hale ray Ash Pain ted S Premier Paint Collection (2 weeks extended lead time) Inset Recessed Panel Revealed Hinge e Cha rcoa l ted Pain Mer lot Pain ted Sag e ted le Sha Key ston e Pain ted Pain ted la Gra y As Pain ted Pain Pain ted Pain Pain ted Wh Van il ite n La ted ight Stra h tte G lz ak T offe Gra Line in O ak E nO Saw Plain spre Birc Premier Paint Collection (2 weeks extended lead time) Inset Recessed Panel Concealed Hinge Inset door with recessed panel and hardwood slab drawer front ¾” solid wood, 2¼” wide mortise & tenon door frame Standard Color e oal Cha rc ted Pain Mer lot ted Pain Sag e ted Key sto ne Pain ted Pain Sha le Pain ted Gra y As h ted Pain la Van il ted Pain Pain ted Wh ite n La tte G lz ak T offe Line ted Pain Stra ight Gra in O ak E Plain Saw nO sso spre hE Birc Che rry K afe ac rry C ogn Che Map le Spic e eC hoc olat spre eG sso lz ¼” veneered engineered core plywood with MDF substrate center Decorative hardware required Hinge: Blum, concealed, soft closing door hinges for all colors Spic Princeton CH - hE afe rry K Che Che Standard Color sso ac ogn rry C pice le S Map Map le S pice Cho cola spre te G sso lz Inset door with recessed panel and hardwood slab drawer front ¾” solid wood, 2¼” wide mortise & tenon door frame ¼” veneered engineered core plywood with MDF substrate center Decorative hardware required Hinge: Satin nickel, revealed barrel, 4-way adjustable hinge for all colors Map le Standard Construction & Door Styles Princeton - Birc hE spre sso Plain Saw nO ak E spre Stra sso ight Gra in O ak T offe Pain e ted Line n La tte G Pain lz ted Wh ite Pain ted Van illa Pain ted G Che rry K afe hoc olat eG Che rry C Map le S pice C Map le S pice ogn ac lz ” solid wood center door panel Painted doors feature MDF substrate center panels Decorative hardware required Premier Paint Collection (2 weeks extended lead time) Mar 2016 a5 Wayzata - Inset Raised Panel Revealed Hinge Standard Color Wayzata CH - oal erlo t harc Pain ted C Pain ted M age ne hale eys to Pain ted K Pain ted S Pain ted S h ray As Birc hE spre sso Plain Saw nO ak E spre Stra sso ight Gra in O ak T offe Pain e ted Line n La tte G Pain lz ted Wh ite Pain ted Van illa Pain ted G Che rry K afe ogn ac Che rry C Map le S pice C Map le S pice hoc olat eG lz Inset door with solid wood, raised panel, ve piece drawer front ¾” solid wood, 2¼” wide french miter door frame ” solid wood center door and drawer front panel Decorative hardware required Hinge: Rustic bronze, revealed door hinges for all colors Premier Paint Collection (2 weeks extended lead time) Inset Raised Panel Concealed Hinge Car ted Gar net Pain ted Tea L eaf Pain ted Stu Pain ted bon y Gra dio bor Har ted Pain Pain Pain ted Urb n Line ted Pain ite an S isqu Pain Pain ted ted Wh Line Gra ight Stra tone eG add nB in O ak S nO Saw Plain Birc Che hS able et rry R uss ider rry C Che lz le Copenhagen - ak S able Glz ute el J aram le C Map el aram le C Map Standard Color Premier Paint Collection (2 weeks extended lead time) Slab Full overlay ¾” door with ¾” slab drawer front Paint: Center core 48 lb/ft³, furniture-grade, medium-density berboard (MDF) Stain: Center core 48 lb/ft³, furniture-grade, medium-density berboard (MDF) Available Late Summer 2016 Standard Color Mar 2016 e Available Late Spring 2016 Premier Paint Collection (2 weeks extended lead time) l Ch a rcoa ted Pain e Sag Mer lot ted Pain Pain ted Key ston e ted Pain S ha le ted Gra y As Pain ted Pain la Van il ted Pain ite Wh ted Pain Line n La h tte G lz Oak Toff e ted Pain Stra ight Gra in ak E Plain Saw nO sso spre Birc hE af e rry K Che Che rry C ogn eC Map le Spic e Spic Map le ac hoc olat spre sso eG lz with 2mm hardwood edge band and hardwood veneer. Decorative hardware required Standard Construction & Door Styles Inset door with solid wood, raised panel, ve piece drawer front ¾” solid wood, 2¼” wide french miter door frame ” solid wood center door and drawer front panel Decorative hardware required Hinge: Blum, concealed, soft closing door hinges for all colors a6 Wood, Finish & Surface Characteristics Our cabinets are a product of nature. How wood looks and feels is affected by climate, soil nutrients, growing season, and time and age at harvest. Wood contains natural imperfections which are part of its appeal and character. Every piece of wood—even within the same tree—is different in color, texture and grain. Trees contain two types of wood: heartwood and sapwood. Heartwood is old growth found at the core of the tree, and sapwood is newer growth found in the outer perimeter of the tree. Heartwood is typically darker and transitions to a lighter color as it grows toward the sapwood. Cabinetry components are selected from heartwood and sapwood to create a blend of material to showcase the beauty of the wood and prevent the nished cabinetry from looking articial or monochromatic. Our cabinetry has been constructed from several pieces of solid hardwood. The face frame, door and drawer fronts consist of solid wood vertical members called stiles, and solid wood horizontal members called rails. The nal components are the door and drawer front slabs or panels. The center panel is made up of several individual solid hardwood pieces known as staves. Staves vary in width and are “glued up” to create & ¾ panels that are machined and proled to match the door prole. Graining differences, as well as normal color change can be expected. Wood species in all nishes exhibit color change when exposed to different types of light. Color differences in wood are caused by variations in minerals found in the soil in which the tree was grown, and the absorption of these minerals. End grain surfaces and softer areas of the wood accept stain differently than other surfaces. Standard Construction & Door Styles Additionally, every wood species exhibits other characteristics including: knots, pinholes, sap runs and darkening with age. It is the beauty and nature of wood to have these characteristics, as well as natural variations in graining and color which will be present throughout our cabinetry. NOTE: All wood species and nishes should avoid long term exposure to moisture. Following are the characteristics specic to the individual wood species & nish: Maple Maple is a close-grained hardwood that is predominately white to creamy white in color, with occasional reddish brown tones. Maple typically features uniform graining as compared to other wood species. Characteristic markings may include ne brown lines, wavy or curly graining, bird’s eye dots and mineral streaks. The natural characteristics described below are normal and should not be considered defects: Creamy white to light blonde tones to dark reddish brown tones Mineral streaks that are a natural characteristic and will appear darker with stain Wavy, curly bird’s-eye or burl graining as well as worm tracking across the grain that will darken when stained Variations within a single door or among adjacent cabinets in a lighter stain can be expected to yellow over time Straight Grain & Plain Sawn Oak Straight Grain Oak and Plain Sawn Oak have many similiar characteristics. Straight Grain Oak will have consistent horizontal and vertical lines and is cut for gure whereas Plain Sawn Oak may have wide, dramatic ‘cathedral arches’ and tends to show more color variation. Both will show patterns of all cuts of oak such as quarter and rift sawn, especially in moldings and component pieces. The natural characteristics described below are normal and should not be considered defects: Oak colors range from light tans to deep reddish browns Streaks of yellow or black mineral deposits Rays, checks and ecks are non-uniform and become visible. Noticeable differences in color between open and close-grained areas Variations within a single door and among adjacent cabinets Mar 2016 a7 Wood, Finish & Surface Characteristics Cherry Cherry is characterized by its red undertones, but may vary in color from white to a deep, rich brown. A close-grained wood with fairly uniform texture, cherry wood reveals pin knots and curly graining. All types of wood will mature with time, and it is especially true for cherry wood, of which the nish will slowly mature or mellow to a rich, darker tone. Those who choose this highly sought-after quality in cherry cabinetry should expect to witness this evolution. The natural characteristics described below are normal and should not be considered defects: Small sap pockets, pin knots and streaks Color ranges from pale yellow sapwood to deep reddish brown heartwood, with occasional shades of white, green, pink or even grey Staining reveals subtle variations and colors that typically darken over time Variations within a single door and among adjacent cabinets Birch Birch is a medium-density hardwood with a distinct, moderate grain pattern that ranges from straight to curly or wavy. The predominant sapwood color is white to creamy yellow, while the heartwood varies in color from medium or dark brown to reddish brown. The natural characteristics described below are normal and should not be considered defects: Creamy yellow to reddish brown tones Mineral streaks that are a natural characteristic and will appear darker with stain Wavy, curly bird’s eye or burl graining resulting in color variation within the same door MDF (also known as furniture board) is an engineered wood product. MDF is manufactured from highly rened wood particles into an extremely dense panel that is very smooth and uniform in thickness and is the best product for painted door panels. MDF is less susceptible to expansion and contraction that cause joints to crack. MDF also provides a consistent and smooth surface for slab doors. Center core is 48-lb/ft³, furniture-grade, medium-density berboard Painted Finishes Painted woods offer a classic look for your cabinetry. Paint will develop hairline cracks in the nish, most notable around the joints - especially miter joints. This is a result of natural expansion and contraction of the wood. With that, MDF center panels are used with all painted door styles to help with the stability of the door. Painted doors require more maintenance for chips, marks, residue from normal kitchen use, and hand/nger prints. Paint may have a slight difference in tones between doors, drawer fronts, face frames and moldings. Glaze Finishes All our glazes are individually hand-brush applied. Glazing is most apparent in contours where “hang-up” would occur. Doors with less detailed proles will show less hang-up which accentuates the grain’s natural attributes. Glaze adds depth, dimension and an understated sheen that’s guaranteed to endure. Glazing results in each piece being unique and individualized. When choosing glazing please understand that each cabinetry component will have a nish appearance that is slightly different from the next. Glazing over lighter stains will result in more noticeable variation than over darker base stain colors. Painted doors that are glazed also utilize dimensionally stable MDF in lieu of solid wood for center panels to add stability against seasonal thermal dimensional changes. Glazing marks may appear outside of the general ‘hang up’ area. Additional maintenance may be required for painted doors against chips, marks, hand/nger prints, and residue from normal kitchen use. Melamine Interior Our standard interior nish is faux birch 30 gram melamine which provides an easy to clean, surface that is resistant to scratches and liquid absorption. The melamine’s strength is achieved by applying to ½” or ¾” plywood material, and is not particleboard. Product Note All veneer wood products react differently to stain or paint processes. Applied end panel material (veneer) will not have the same character traits as solid hardwood, and will vary in color, graining, sheen and tone depths. Mar 2016 Standard Construction & Door Styles Medium Density Fiberboard (MDF) a8 The Finish Process The nish process begins with the selection of the nest hardwoods. Hardwood is screened to help ensure that the natural tones blend together to create a furniture look that will also stand up to everyday wear and tear. Our oven cured, catalyzed varnish is manufactured by Akzo-Nobel, a world leader that produces superior furniture nishes. Our nish has also been tested against 26 different household chemicals for a 24 hour period. These tests are performed by the Kitchen Cabinet Manufacturers Association (ANSI/KCMA A161.1-2000). KCMA’s Performance and Certication Program are among the most respected in the home building industry – and ensure consumers that the cabinetry they purchase are of the highest quality. The nish consists of a 16 step process. Note For proprietary reasons the description below does not differentiate between stain and paint finishes. The term “catalyzed” is only pertinent to the stain nish process otherwise the steps remain the same. Sanding – From medium to very ne grit sequence. Sanding follows a strict ‘grit’ sequence of sand paper that is completed by a vacuum cleaning of the of the wood to remove all dust and to ensure that the wood surface is free of all dust and particles. Toner Applications - The rst toner is applied to selected stain components to enhance the natural wood beauty and graining. Then, components are oven cured at 130° F, followed by a second toner application and oven curing. Standard Construction & Door Styles Wood Conditioner Application - Wood conditioner is used before the stain prep coat to prepare the wood surface and to reduce imperfections followed by oven curing at 130° F. Hand Sand & Dust Removal - After the wood conditioning has been completed more sanding is required prior to stain to help ensure an even surface. Stain Application & Hand Wiping - Stain is evenly applied to all surfaces. This deep penetrating stain is applied for even coverage on all proles. The wood is then hand-wiped to remove excess stain, emphasizing the natural wood grain and then oven cured at 130° F. Apply Catalyzed Stain Sealer - Sealer is applied to protect stain and seal components. All stained components receive two coats of tough, non-yellowing, catalyzed sealer and then are oven cured at 130° F. Hand Sand & Dust Removal - A nal sanding process is completed to remove dust to prep for nal nish application to achieve an ultra smooth nish. After each seal coat is applied and sanded, door is vacuumed to remove debris. Baked Enamel – Paint Finishes: An enamel paint is evenly applied to all surfaces and then oven-cured for a uniform surface. Final Finish Top Coat - To complete the nish process a premium quality catalyzed varnish (stain only) is applied to protect the grain from moisture and lock in the beauty of the wood and then one nal oven curing at 130° F. NOTES: For proprietary reasons the description below does not differentiate between stain and paint nishes. The term “catalyzed” is only pertinent to the stain nish process otherwise the steps remain the same. Because of hazardous product shipping regulation and above multi-step professional factory nish process costs “matching” paint and stain is not offered. We strongly believe that our colors and sheen cannot be matched outside of our factory process. Therefore we recommend that if a color “match” (or blend) is needed to contact a local paint supplier or retail store with a sample color of our product to receive a paint or stain that is applied in the eld. Mar 2016 a9 Standard Cabinet Construction Wall, Base, and Utility cabinets are constructed using high quality materials and hardware. The illustration below identies the components of a standard Base cabinet. Wall and Utility cabinets have similar construction. Please refer to Construction Notes below outlining differences. Soft-close is used for all FOL door and drawer hardware (below). Inset styles are different please see details on pages a4-a5. ¾" x 1½" hardwood face frame ½" plywood captured i-beam stabilizers ¼" plywood drawer box bottom Easy to clean 30 gram faux birch melamine interior ¾" solid or framed hardwood drawer fronts Quietex™ clear, soft urethane door & drawer bumpers Full access, Blum®, Tandem plus Blumotion, steel, soft-close, undermount drawer glide rated to support 90 lbs. ½" plywood unfinished, sealed end (side) return ¾" mortise & tenon (pictured) or mitre joinery Blum® Compact Blumotion® soft- close 6-way adjustable, concealed, nickel plated, steel, 107° opening hinge ½" plywood floor, captured all sides ½" plywood toe kick (not finished) Toe Kick - Inset area from face frame Toe kick construction requires BTK8 matching toe kick—must be ordered separately. Putty stick and touch up marker are recommended for exposed, cut, raw ends of BTK8 and touch up kit is included in every sink base.. NOTE: When BTK8 is applied inset toe kick area is 3 5/16” deep Spacer Block Roll-Out Tray (ROT) for Inset & FOL ROT Hinge Placement The Roll-Out Trays for Inset (revealed hinge illustrated above) cabinets will have ‘spacer’ blocks inserted between the ROT and cabinet, for each side. This allows for full access of ROT without interference from the door (Inset Style) and hinge (FOL Style). The ROT-B and ROT-C (concealed inset hinge) are narrower than ROT-A. Mar 2016 Inset Toe Kick with BTK8 applied ¼" reveal end side return (not finished) Face Frame Cabinet End (BEP 3/16” shown applied) 3½” 4½” Cut/Raw end of BTK8 (option to apply toe kick cap TKCAP) Construction Notes *Wall & Utility cabinets have ½” plywood top and bottom Tops/Bottoms of cabinets unnished plywood visible All cabinets 16-24” in depth feature plastic polymer locking shelf clips Wall cabinets feature decorative metal shelf rests All cabinets 9” - 21” wide have one door All cabinets 24” - 36” wide have two BUTT doors Cabinets 42” and wider have 3” center stile Recessed panel Drawer Base cabinets have 1/2” solid wood center panels Standard Construction & Door Styles ¾" full depth plywood shelves with front edge banding ¾" solid hardwood door frame a 10 Standard Cabinet Construction Full Overlay Reveal Inset Reveal Full Overlay (FOL) doors are sized to cover the majority of the face frame. FOL has concealed hinges that may require periodic adjustments. Gapping between doors and drawer fronts will need to be adjusted after nal installation. Inset doors and drawer fronts are virtually part of the cabinet face frame. This provides a smooth cabinet front alignment. Inset cabinets may need additional adjustment after each heating and cooling season. Gapping between doors/drawer fronts and face frames may need to be adjusted after nal installation. ¼” 1½” Face Frame ½” Face Frame 6” H drawer front 5½” H drawer front ½” Standard Construction & Door Styles 1½” center rail* 1¼” 20” H base door 22½” H base door 1½” ½” 1½” FOL Construction Notes Wall cabinets have same reveal as base and tall cabinets: ½” on top/bottom and ¼” on sides Wall cabinets are symmetrical. Butt Door - FOL & Inset Inset Construction Notes *Center rail for Inset DB302 & DB362 is 1½” high Inset wall cabinets have the same outside face frame dimensions and the standard ” drawer/ door opening gap is nominal and will vary depending on standard or CH hinge selection. Wall cabinets are symmetrical. Construction Note Measurement tolerance specications require dimensions (width, height, depth gap or reveal), to be within 1½16” . Material dimensions may be nominal based on lumber industry standards. Mar 2016 a 11 Cabinet Dimensions Illustrations specify dimensions of vertical stiles and horizontal rails, inset toe kick, cabinet height, and standard interior openings for wall, base, utility and vanity cabinets. Wall Cabinets Wall 12” high 12” Wall 15” high 1½” 9” 15” 1½” 12” 18” 1½” Wall 24” high 24” Wall 18” high 15” 1½” 1½” Wall 30” high Wall 21” high 1½” 21” 18” 1½” 1½” Wall 36” high 1½” 1½” 1½” Wall 42” high 1½ ” 21” 30” 27” 36” 33” 42” 39” 1½” Furniture Wall Drawer Full Overlay & Inset 1½" 1½" 6" 3" 1½" 1½” 1½” 1½” Base Full Overlay Base Inset 1½” 34½” 1½” 1½” 1½” 4½” 5¾” 21” 34½” 2 Drawer Base Full Overlay & Inset 1½” 1½” 12¾” 1½” 1¼” 34½” 20” 1½” 12¾” 1½” 4½” 3 Drawer Base Full Overlay 1½” 4½” 34½” 1½” 1½” 9¾” 1½” 9¾” 1½” 4½” 1½” 4½” 3 Drawer Base Inset 1½” 5¾” 34½” 1½” 4½” 1½” 1¼” 1 Drawer Base Full Overlay & Inset 1½” 1½” 15” 12” 1½” 1¼” Kneehole Drawer Full Overlay & Inset 7” 3” 4½” 1¼” 1¼” Desk Drawer Full Overlay & Inset 3” 1¼” 5” 3¾” 1½” 4½” Standard Interior Cabinet Dimensions Cabinet Cabinet Front Interior Width Width 9” 7½” 12” 10½” 15” 13½” 18” 16½” 21” 19½” Mar 2016 Cabinet Cabinet Front Interior Width Width 24” 22½” 27” 25½” 30” 28½” 33” 31½” 36” 34½” Cabinet Cabinet Depth Interior (Reduced) Depth 6” 7” 8” 9” 10” 11” Cabinet Cabinet Depth Interior (Reduced) Depth 12” 13” 14” 15” 16” 17” Cabinet Cabinet Depth Interior (Reduced) Depth 18” 19” 20” 21” 22” 23” 24” Standard Construction & Door Styles Base Cabinets a 12 Cabinet Dimensions Illustrations specify dimensions of vertical stiles and horizontal rails, inset toe kick, cabinet height, and standard interior openings for wall, base, utility and vanity cabinets. Utility Cabinets Utility/Pantry Full Overlay & Inset 1½” Utility/Oven Full Overlay Utility/Oven Inset 3” 1½” 3” 1½” 14” 20” 26” 27” 33” 39” 14” 20” 26” 9” 84” 90” 96” 3” 84” 90” 96” 1½” 9” 84” 90” 96” 40” 40” Standard Construction & Door Styles 46½” 9” 1½” 4½” 4½” 1½” 4½” 7¾” 5¾” 1½” 4½” Vanity Cabinets Vanity Base Full Overlay Vanity Base Inset 1½” 4½” 34½” 1½” 1½” 1½” 21” 5¾” 34½” 1½” 1¼” 20” 1½” 4½” 1½” 4½” Vanity 3 Drawer Full Overlay 1½” 1½” 4½” 1½” 9¾” 34½” 1½” 9¾” 1½” 4½” Vanity 3 Drawer Inset 1½” 5¾” 34½” 1½” 1¼” 1¼” 1½” 4½” Vanity 2 Drawer Full Overlay & Inset 1½” 1½” 12¾” 34½” 1½” 12¾” 1½” 4½” Desk File Drawer Full Overlay 1½” 4½” 28½” 1½” Desk File Drawer Inset 1½” 5¾” 1½” 28½” 15” 1½” 4½” 1½” 1¼” 14” 1½” 4½” Mar 2016 a 13 Drawer Box & ROT Dimensions Dimensions are nominal and only provided as a reference. Discrepancies, errors, and omissions may be present. Products may be changed, modied and discontinued without notication. ‘A’ Drawer Box | 24” Cabinet (Subtract 3” for Vanity Cabinets) Exterior Width Length Height Interior Width Length Height B12 8-1/2” 21” 3-5/8” B12 7-1/4” 19-5/8” 2-7/8” B15 11-1/2” 21” 3-5/8” B15 10-1/4” 19-5/8” 2-7/8” B18 14-1/2” 21” 3-5/8” B18 13-1/4” 19-5/8” 2-7/8” B21 17-1/2” 21” 3-5/8” B21 16-1/4” 19-5/8” 2-7/8” B24 20-1/2” 21” 3-5/8” B24 19-1/4” 19-5/8” 2-7/8” B27 23-1/2” 21” 3-5/8” B27 22-1/4” 19-5/8” 2-7/8” B30 26-1/2” 21” 3-5/8” B30 25-1/4” 19-5/8” 2-7/8” B33 29-1/2” 21” 3-5/8” B33 28-1/4” 19-5/8” 2-7/8” B36 32-1/2” 21” 3-5/8” B36 31-1/4” 19-5/8” 2-7/8” Height Drawer Box & ROT Notes See pages a15 & a16 for Full-Overlay & Inset styles placement and usage Standard Blum glides have a a maximum rating of 90 lbs per Drawer Box/ROT load capacity ‘A’ Roll-Out Tray | 24” Cabinet (Subtract 3” for Vanity Cabinets) Width Length Height Interior Width Length B12 8-1/2” 21” 3-5/8” B12 7-1/4” 19-5/8” 2-7/8” B15 11-1/2” 21” 3-5/8” B15 10-1/4” 19-5/8” 2-7/8” B18 14-1/2” 21” 3-5/8” B18 13-1/4” 19-5/8” 2-7/8” B21 17-1/2” 21” 3-5/8” B21 16-1/4” 19-5/8” 2-7/8” B24 20-1/2” 21” 3-5/8” B24 19-1/4” 19-5/8” 2-7/8” B27 23-1/2” 21” 3-5/8” B27 22-1/4” 19-5/8” 2-7/8” B30 26-1/2” 21” 3-5/8” B30 25-1/4” 19-5/8” 2-7/8” B33 29-1/2” 21” 3-5/8” B33 28-1/4” 19-5/8” 2-7/8” B36 32-1/2” 21” 3-5/8” B36 31-1/4” 19-5/8” 2-7/8” ‘B’ Roll-Out Tray | 24” Cabinet (Subtract 3” for Vanity Cabinets) Exterior Width Length Height Interior Width Length Height B12 6-1/2” 21” 3-5/8” B12 5-1/4” 19-5/8” 2-7/8” B15 9-1/2” 21” 3-5/8” B15 8-1/4” 19-5/8” 2-7/8” B18 12-1/2” 21” 3-5/8” B18 11-1/4” 19-5/8” 2-7/8” B21 15-1/2” 21” 3-5/8” B21 14-1/4” 19-5/8” 2-7/8” B24 18-1/2” 21” 3-5/8” B24 17-1/4” 19-5/8” 2-7/8” B27 21-1/2” 21” 3-5/8” B27 20-1/4” 19-5/8” 2-7/8” B30 24-1/2” 21” 3-5/8” B30 23-1/4” 19-5/8” 2-7/8” B33 27-1/2” 21” 3-5/8” B33 26-1/4” 19-5/8” 2-7/8” B36 30-1/2” 21” 3-5/8” B36 29-1/4” 19-5/8” 2-7/8” ‘C’ Roll-Out Tray | 24” Cabinet (Subtract 3” for Vanity Cabinets) Exterior Width Length Height Interior Width Length Height B12 5-1/2” 21” 3-5/8” B12 4-1/4” 19-5/8” 2-7/8” B15 8-1/2” 21” 3-5/8” B15 7-1/4” 19-5/8” 2-7/8” B18 11-1/2” 21” 3-5/8” B18 10-1/4” 19-5/8” 2-7/8” B21 14-1/2” 21” 3-5/8” B21 13-1/4” 19-5/8” 2-7/8” B24 17-1/2” 21” 3-5/8” B24 16-1/4” 19-5/8” 2-7/8” B27 20-1/2” 21” 3-5/8” B27 19-1/4” 19-5/8” 2-7/8” B30 23-1/2” 21” 3-5/8” B30 22-1/4” 19-5/8” 2-7/8” B33 26-1/2” 21” 3-5/8” B33 25-1/4” 19-5/8” 2-7/8” B36 29-1/2” 21” 3-5/8” B36 28-1/4” 19-5/8” 2-7/8” Mar 2016 Standard Construction & Door Styles Exterior a 14 Drawer Box & ROT Dimensions Dimensions are nominal and only provided as a reference. Discrepancies, errors, and omissions may be present. Products may be changed, modied and discontinued without notication. ‘Deep’ Drawer Box | 24” Cabinet (Subtract 3” for Vanity Cabinets) Exterior Width Length Height Interior Width Length Drawer Box & ROT Notes Height B12 8-1/2” 21” 8” B12 7-1/4” 19-5/8” 7-1/4” B15 11-1/2” 21” 8” B15 10-1/4” 19-5/8” 7-1/4” B18 14-1/2” 21” 8” B18 13-1/4” 19-5/8” 7-1/4” B21 17-1/2” 21” 8” B21 16-1/4” 19-5/8” 7-1/4” B24 20-1/2” 21” 8” B24 19-1/4” 19-5/8” 7-1/4” 7-1/4” B27 23-1/2” 21” 8” B27 22-1/4” 19-5/8” B30 26-1/2” 21” 8” B30 25-1/4” 19-5/8” 7-1/4” B33 29-1/2” 21” 8” B33 28-1/4” 19-5/8” 7-1/4” B36 32-1/2” 21” 8” B36 31-1/4” 19-5/8” 7-1/4” See pages a15 & a16 for Full-Overlay & Inset styles placement and usage Standard Blum glides have a a maximum rating of 90 lbs per Drawer Box/ROT load capacity Standard Construction & Door Styles Furniture Drawer Box Exterior Width Length Height Interior Width Length Height FFD15 11-1/2” 18” 6” FFD15 10-1/4” 16-5/8” 5-1/4” FFD18 14-1/2” 18” 6” FFD18 13-1/4” 16-5/8” 5-1/4” FWD1506 10-15/16” 9-1/2” 3-5/8” FWD1506 9-5/8” 8-1/4” 2” FWD1806 13-15/16” 9-1/2” 3-5/8” FWD1806 12-5/8” 8-1/4” 2” FWD2106 16-15/16” 9-1/2” 3-5/8” FWD2106 15-5/8” 8-1/4” 2” FWD2406 19-15/16” 9-1/2” 3-5/8” FWD2406 18-5/8” 8-1/4” 2” FKD-30/27 23-1/2” 18” 3-5/8” FKD-30/27 22-1/4” 16-5/8” 2-7/8” FDD-30/27 23-1/2” 18” 3-5/8” FDD-30/27 22-1/4” 16-5/8” 2-7/8” FSD306-H 4-7/8” 10-1/2” 3-5/8” FSD306-H 3-5/8” 9-1/4” 3” FSD306-V 4-3/8” 10-1/2” 3-5/8” FSD306-V 3-1/8” 9-1/4” 3” Mar 2016 a 15 Full-Overlay (FOL) Drawer Box | ROT Placement Dimensions are nominal and only provided as a reference. Discrepancies, errors, and omissions may be present. Products may be changed, modied and discontinued without notication. BASE FOL 1-ROT FOL A 3¼" 2-ROT FOL A 3¼" A 3¼" 8½" adjustable shelf 21" adjustable shelf A 19¾" 10½" B B FH 3-ROT FOL FH 2-ROT FOL A 11½" 7" 8¾" A 13½" 8¾" B B 10½" DB FOL DB-2 FOL A A 3¼" 11½" 10¼" A 8½" 12¼" 11½" 8½" A 10" B FURNITURE WALL FOL DB-1 FOL 2" 10¾" KNEE FOL DESK FOL 3¼" Mar 2016 2½" Standard Construction & Door Styles A UTILITY FOL a 16 Inset & Inset-CH Drawer Box | ROT Placement Dimensions are only provided as a reference. Discrepancies, errors, and omissions may be present. Products may be changed, modied and discontinued without notication. BASE ALL INSET A 2-ROT INSET | INSET-CH 1-ROT INSET | INSET-CH 4½" A 4½" 4½" A 7½" adjustable shelf 20" adjustable shelf 18¾" B|C 10½" B|C B|C 11½" Standard Construction & Door Styles UTILITY INSET | INSET-CH FH 3-ROT INSET | INSET-CH FH 2-ROT INSET | INSET-CH B|C B|C 7" 8¾" B|C 13½" B|C 8¾" B|C 10½" DB ALL INSET A DB-2 ALL INSET B|C 4½" 11½" 10¼" B|C 12¼" 11½" B|C 10" B|C FURNITURE WALL ALL INSET DB-1 ALL INSET 2" 10¾" KNEE DRAWER ALL INSET DESK DRAWER ALL INSET 3¼" 2½" Mar 2016 a 17 Cabinet Shelf Dimensions & Weight Capacity Dimensions and capacity are only provided as reference. Discrepancies, errors, and omissions may be present. Products may be changed, modied and discontinued without notication. Cabinet capacity weight is rated at the industry standard of 15 lbs.per square foot of shelf or cabinet bottom when cabinet is mounted independently to wall. Installaion of cabinets to adjacent cabinets, side wall, or ceiling will provide more capacity. Wall Cabinet Shelf Dimensions & Weight Capacity Width Length lbs/Shelf # of Shelves lbs/Cabinet Width Length lbs/Shelf # of Shelves lbs/Cabinet W930 7-1/4” 10-7/8” 8 2 24 WR301224 28-1/4” 22-7/8” 64 0 64 W1230 10-1/4” 10-7/8” 11 2 34 WR331224 31-1/4” 22-7/8” 71 0 71 W1530 13-1/4” 10-7/8” 14 2 41 WR361224 34-1/4” 22-7/8” 78 0 78 W1830 16-1/4” 10-7/8” 17 2 51 WR301524 28-1/4” 22-7/8” 64 0 64 W2130 19-1/4” 10-7/8” 20 2 61 WR331524 31-1/4” 22-7/8” 71 0 71 W2430 22-1/4” 10-7/8” 24 2 71 WR361524 34-1/4” 22-7/8” 78 0 78 W2730 25-1/4” 10-7/8” 27 2 81 WR301824 28-1/4” 22-7/8” 64 0 64 W3030 28-1/4” 10-7/8” 30 2 91 WR331824 31-1/4” 22-7/8” 71 0 71 W3330 31-1/4” 10-7/8” 34 2 101 WR361824 34-1/4” 22-7/8” 78 0 78 W3630 34-1/4” 10-7/8” 37 2 111 WR302124 28-1/4” 22-7/8” 64 0 64 W4230 40-1/4” 10-7/8” 44 2 131 WR332124 31-1/4” 22-7/8” 71 0 71 W936 7-1/4” 10-7/8” 8 2 24 WR362124 34-1/4” 22-7/8” 78 0 78 W1236 10-1/4” 10-7/8” 11 2 34 WR302424 28-1/4” 22-7/8” 64 0 128 W1536 13-1/4” 10-7/8” 14 2 41 WR332424 31-1/4” 22-7/8” 71 0 142 W1836 16-1/4” 10-7/8” 17 2 51 WR362424 34-1/4” 22-7/8” 78 0 158 W2136 19-1/4” 10-7/8” 20 2 61 WAC2430 Call for dimensions 51 2 153 W2436 22-1/4” 10-7/8” 24 2 71 WAC2436 Call for dimensions 51 2 153 W2736 25-1/4” 10-7/8” 27 2 81 WAC2442 Call for dimensions 51 3 204 W3036 28-1/4” 10-7/8” 30 2 91 WAC2730 Call for dimensions 63 2 189 W3336 31-1/4” 10-7/8” 34 2 101 WAC2736 Call for dimensions 63 2 189 W3636 34-1/4” 10-7/8” 37 2 111 WAC2742 Call for dimensions 63 3 252 W4236 40-1/4” 10-7/8” 44 2 131 WER2430 Call for dimensions 45 2 135 W942 7-1/4” 10-7/8” 8 3 32 WER2436 Call for dimensions 45 2 135 W1242 10-1/4” 10-7/8” 11 3 46 WER2442 Call for dimensions 45 3 180 W1542 13-1/4” 10-7/8” 14 3 54 B9 7-1/4” 22-7/8” 17 1 W1842 16-1/4” 10-7/8” 17 3 68 B12 10-1/4” 22-7/8” 24 1 W2142 19-1/4” 10-7/8” 20 3 81 B15 13-1/4” 22-7/8” 29 1 W2442 22-1/4” 10-7/8” 24 3 95 B18 16-1/4” 22-7/8” 36 1 W2742 25-1/4” 10-7/8” 27 3 108 B21 19-1/4” 22-7/8” 43 1 W3042 28-1/4” 10-7/8” 30 3 121 B24 22-1/4” 22-7/8” 50 1 W3342 31-1/4” 10-7/8” 34 3 135 B27 25-1/4” 22-7/8” 57 1 W3642 34-1/4” 10-7/8” 37 3 148 B30 28-1/4” 22-7/8” 64 1 W4242 40-1/4” 10-7/8” 44 3 175 B33 31-1/4” 22-7/8” 71 1 W3012 28-1/4” 10-7/8” 30 0 30 B36 24-1/4” 22-7/8” 79 1 W3312 31-1/4” 10-7/8” 33 0 33 B42 40-1/4” 22-7/8” 93 1 W3612 34-1/4” 10-7/8” 37 0 37 BER33 Call for dimensions 120 1 W3015 28-1/4” 10-7/8” 30 0 30 BER36 Call for dimensions 120 1 W3315 31-1/4” 10-7/8” 33 0 33 BEA Call for dimensions 21 1 W3615 34-1/4” 10-7/8” 37 0 37 W1518 13-1/4” 10-7/8” 13 0 13 W1818 16-1/4” 10-7/8” 17 0 17 W2118 19-1/4” 10-7/8” 20 0 20 W2418 22-1/4” 10-7/8” 23 0 23 W2718 25-1/4” 10-7/8” 27 0 27 W3018 28-1/4” 10-7/8” 30 0 30 W3318 31-1/4” 10-7/8” 33 0 33 W3618 34-1/4” 10-7/8” 37 0 37 W3021 28-1/4” 10-7/8” 30 0 30 W3321 31-1/4” 10-7/8” 33 0 33 W3621 34-1/4” 10-7/8” 37 0 37 W3024 28-1/4” 10-7/8” 30 1 60 W3324 31-1/4” 10-7/8” 33 1 66 W3624 34-1/4” 10-7/8” 37 1 74 Mar 2016 SKU Standard Construction & Door Styles SKU Standard Construction & Door Styles a 18 Notes Mar 2016 b1 Construction Modifications Note: Black square icons are used throughout this Specication Guide to indicate which construction options are available for a particular cabinet and/or accessory. If no icon is present, option is NOT available. If a white square icon is shown option is included as standard. Please consult with Customer Service with any questions for nal determination of product. Standard Cabinet Modification Codes AFD Aluminum Framed Door FBE Finished Beaded End FE FFO Finished End Finished Front Only ID Increased Depth MI Matching Interior MBB Matching Beaded Back PEN Peninsula PFI Prepped For Insert RD Reduced Depth VDA Void Door/Drawer Front All TOT Tilt-out Tray SBL Sink Base Liner PWB Pull-out Wire Basket TBR Towel Bar Discrepancies, errors, and omissions may occur between this Specication Guide, design software, and the web based Quoting Tool. Please consult with Customer Service for nal determination of product. 6 Square Cabinets® reserves the right to change and alter its product and/or specications without notication as market conditions require. It is the responsibility of the individual user to update their own Specication Guide and design software. Material dimensions may be nominal based on lumber industry standards. Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 Construction Modifications Super Sink Base Cabinet Modification Codes b2 FE Finished End Available for all cabinets. Factory installed 3/16” nominal panel veneered engineered core. Specify Left/Right/Both to identify Finished End. List Price Price based on individual panel - please see page b7 FBE Finished Beaded End Available for all cabinets. Factory installed ¼” nominal panel veneered engineered core beadboard. Specify Left/Right/Both to identify Finished Beaded End. List Price Price based on individual panel - please see page b7 3” Finished End Notes Construction Modifications All standard Wall, Base, Utility and Vanity cabinets have ½” plywood natural sealed nished ends. Specify Left/Right/Both to identify Finished End. If not specied for L/R/B cabinet ends will not be nished. Finished Ends have factory applied panel (FE, FBE). There will be no ¼” reveal and ends will be nished. Finished panels also available, shipped loose, for eld installation. Factory applied panels for 96” tall Utility cabinets are not available as toe kick is shipped loose. CONSTRUCTION NOTE Seam between applied panel and face frame will be visible and may vary in width due to the variance of wood. Standard Construction: Natural sealed plywood end with ¼” reveal PEN : h Finished End (FE/FBE) Applied panel wit r plywood veneer fo furniture cabinet end Peninsula Peninsula cabinets have frame & doors on both sides of cabinet Peninsula modication only available for Standard Wall and Standard Base and Standard Full Height Base cabinets Peninsula Wall cabinets require additional support for installation MBB not available Standard cabinet depth applies List Price +70% Mar 2016 b3 ID Increased Depth Maximum cabinet width for this option is 36”. Increased Depth option is available in 1” increments. Cabinet Type Wall Vanity Availability Maximum depth is 24” Maximum depth is 23” List Price +35% +25% Installation Note Installation of Increased Depth cabinets require additional support such as attachment to adjacent cabinets, ceiling, soft, or support from below. Failure to provide additional support may result in collapse of the cabinet, serious personal injury and/or property damage. Damage relating to installation failure is not covered by warranty. RD Reduced Depth Maximum cabinet width for this option is 36”. Reduced Depth Option is available in 1” increments. Cabinet Type Wall Base/Vanity*† ‡ Tall† Availability Minimum depth is 5” Minimum depth is 6” Minimum depth is 6” List Price +30% +25% +25% * Only 21” & 24” depth base/vanity cabinets will have operating drawers, all others will have false drawer fronts. † Only 24”depth cabinets available with Roll-Out Trays (ROT). ‡ Peninsula cabinets less than 11” deep will not have built up toe kick but will be a 30” high cabinet that requires toe kick build up with eld installation Base End Angle (BEA) cabinets minimum depth is 18” MI Matching Interior Matching Interior includes interior cabinet sides, top, bottom, back, and shelves. Standard color Matching Interior material features easy clean, non-porous sanitary melamine and is a representation of exterior color and wood species. Designer Paint Collection will have plywood painted interiors with the exception of painted Linen which will be melamine plywood. Drawer Boxes, Roll-Out Trays, and any inserts will not have Matching Interior. Matching Interior panels extend to the top and bottoms of cabinet and is visibly different than standard interior cabinets (note drawing to right) List Price Wall, Base and Vanity Cabinets +30% Tall Cabinets +65% Product Note Cabinets with Mullion Frame Doors (MFD) have standard matching plywood veneer interior. Prepped For Insert (PFI) cabinets are not supplied with matching interior. Matching Interior (MI) option must be ordered separately. Design Note FE, FBE, ID, MBB, RD & VDA are also available with this option. Mar 2016 Construction Modifications Installation Note There is a potential tipping hazard for reduced depth base, vanity and tall utility cabinets until they are installed. b4 PFI Prepped For Insert Available for all door styles (doors WILL NOT contain mullions). Shelves included as standard with cabinet, check individual product specication. Insert panels and /or glass are not included and must be purchased locally. Door back routed to receive up to ” thick insert. Matching Interior (MI) is not standard with PFI cabinets and must be ordered separately. Not available on 9” wide cabinets List Price Product Note + $136 Single door Fasteners are not included. Glass inserts ARE NOT offered because most likely you can nd a wide variety of selections in your market are that will be at a greatly reduced cost that we can offer. The glass provider will provide fastners or other recomendations to install. + $272 Double door MBB Matching Beaded Back Panel ” plywood veneered beaded back panel that matches cabinet frame & door Matching Interior (MI) is not standard with MBB cabinets and must be ordered separately. 3” List Price + 45% per cabinet Design Note PFI, FE, FBE, ID, RD are also available with this option. Construction Modifications FFO Finished Front Only Available for most cabinets with a face frame. Includes cabinet face frame, door(s), drawer front(s), and hinges. List Price -30% VDA Void Door/Drawer Front All Available for all cabinets. Cabinet ships without doors, hinges, drawer box and drawer glides. VDA option has standard melamine interior. Cabinet Face Frames are pre-drilled for door hinges. Trim is recommended such as OCM8 or SM8. List Price - 40% Design Note FE, FBE, ID, MI, MBB, RD are also available with this option. Mar 2016 b5 AFD Aluminum Frame Door Natural aluminum frame 2” wide door (5/16” revealed) Only available in Full Overlay Door (FOL) styles Inset AFD styles will be FOL Overlay Glass - Tempered, 4 mm thick, glass insert installed (not removable) - Color: Satin (opaque), cabinet interior and objects in cabinet will be visible - Aluminum frame visible behind glass Decorative Hardware Hole Drilling Form - Form must be completed and submitted to customerservice @cliqstudios.com by customer - AFD door(s) will ship directly to address that cabinets were delivered to. Matching Interior (MI) is not standard with AFD cabinets and must be ordered separately. AFD door(s) are shipped separately and may arrive before or after cabinet order depending on customer’s completion and submission of decorative hardware hole drilling form. Field install required - Door hinges will be included with door packaging - Cabinet doors pre-drilled for hinges - Cabinet frame IS NOT pre-drilled for hinges and must be drilled in the eld with install List Price + $820 per door (regardless of size) Frame FRONT Glass Side View Cutaway Satin Glass Opaque - interior is visible TOP HINGE DOOR APPLICATION (Only for AFD) Field install for hinges and lid stay assembly required Door Hinge - Blum® soft-close door hinges provided with door packaging - Cabinet frame will need to be drilled for door hinges (instruction template available) Stay Lid Arms - Blum adjustable lid stays (arms) provided with door packaging - Stay lid arms open and stay at angles up to 105° Assembly Cabinet door(s) - Pre-drilled for hinges and stay lid mounting bracket Cabinet frame - Will need to be drilled for hinges and stay lid mounting brackets in the eld Instructions template available Mar 2016 Construction Modifications Front Corner View b6 Super Sink Base Cabinet Modifications Super Sink Base Modicaitons are only available for Sink Base cabinets 30”,33”, 36” wide unless noted below. Modications can be ordered individually or together. Some modication options may not be available depending on cabinet. ble Availa2016 g in Spr TOT 30”, 33”, 36” 34½” 24” Tilt-out Tray Stainless Steel tray and hinges Slim design to accomodate most mimimum clearance for large sinks Available for 21”, 24”, 27”, 30”, 33”, 36”, and 42” wide standard sink bases Factory installed List Price + $200 SBL Profile Sink Base Liner Available only for 30”, 33”, and 36” wide sink bases Almond color, polystyrene liner Resistant to most household chemicals Fit to bottom of sink base and holds up to 1 gallon of liquid before draining to oor Factory installed List Price Construction Modifications + $225 PWB Pull-out Wire Basket 9" Chrome wire mounted to interior side of cabinet Must call out installed side: Left/Right Designed to allow room for most plumbing applications Ball-bearing glides mounted to side of cabinet with blocking to extend past open door Available for any Sink Base Cabinet (plumbing may interfere) Factory installed 16" List Price + $300 TBR 9¾" Towel Bar Chrome wire bar mounted to inside of door Must call out installed side: Left/Right Holds three towels and designed to keep towels away from door Available for any Sink Base Cabinet Factory installed 12¾" 3½" 6½" List Price + $50 Mar 2016 b7 Finished End Pricing FE FBE 3” ¼” Finished Panel Wood Specie Pricing below is only quoted for one (1) nished end. To calculate for both sides nished multiply by two (2). Maple, Birch, Oak & Painted Linen & White Cherry W 12” High - 30” High $58 $62 W 36” High $63 $69 Beaded Panel Wood Specie Maple, Birch, Oak & Painted Linen & White Cherry $73 $99 $105 $124 $79 $114 $122 $143 Premier Paint Colors not Linen Premier Paint Colors not Linen Wall Cabinet Finished End Panels W 42” High $72 $77 $90 $130 $138 $163 WR 12” High - 24” High $101 $110 $126 $205 $230 $256 WAC 30” High x 12” Deep $58 $62 $73 $99 $105 $124 WAC 30” High x 15” Deep $78 $91 $98 $157 $167 $196 WAC 36” High x 12” Deep $63 $69 $60 $114 $122 $143 WAC 36” High x 15” Deep $78 $91 $98 $157 $167 $196 WAC 42” High x 12” Deep $72 $77 $90 $130 $138 $163 WAC 42” High x 15” Deep $78 $91 $98 $157 $167 $196 $101 $110 $126 $202 $230 $256 Utility 84” High (Depth: 6”-12”) $230 $261 $288 $259 $287 $324 Utility 84” High (Depth: 13”-24”) $278 $309 $348 $470 $527 $588 Utility 90” High (Depth: 6”-12”) $230 $261 $288 $274 $304 $343 Utility 90” High (Depth: 13”-24”) $278 $309 $348 $500 $561 $625 RR96 96” High - NOT AVAILABLE with Utility Cabinet: note below $278 $261 $288 $259 $287 $324 Base/Vanity Cabinet & DWR3 Finished End Panels Applied Panel Tall Utility Cabinet & RR96 Finished End Panels Product Note All nished end panels are 3/16” veneered engineered core plywood with MDF substrate center. All veneer reacts differently to stain or/and paint processes. Finished end panel material (veneer) will not have the same character traits as solid hardwood, and will vary in color, graining, sheen and tone depths. Painted panels do not have wood veneer applied. DP Premier Paint Collection Designer paint is offered in a variety of colors on selected door styles and is considered a modication. Availablility may be limited please see pages a2-a5. Leadtime: Please add an addtional two (2) week lead time to order for full kitchen, accessory and accent cabinets (3-5) will be shipped with standard (non Premier Paint Collection) order without extended leadtime. Rush Order leadtimes will remain standard Designer Paint orders must be placed separately and can be combined for shipping with other orders Mar 2016 Construction Modifications 96” High Utility Cabinet Design & Install Note 96” high Utility cabinets do not have FE/FBE factory nished ends available. 96” toe kick box is shipped loose and requires eld installation so cabinet can be stood up in 8’ ceiling height room. Order TEP or BTEP separately & trim panel in eld for installation. b8 Standard Matching Frame Door (MFD) Cabinets Matching Frame Doors (MFD) cabinets are only available in select sizes and come standard with a matching plywood veneer interior. MFD doors are prepped for glass but glass is sold separately. Prepped For Insert (PFI) option is available for all wall cabinets but does not include Matching Interior (MI) which must be ordered separately. MFD Available Standard SKUs 30” High Wall: W1530-MFD, W1830-MFD, W3030-MFD, CW2430-MFD, CW2730-MFD 36” High Wall: W1536-MFD, W1836-MFD, W3036-MFD, CW2436-MFD, CW2736-MFD 42” High Wall: W1542-MFD, W1842-MFD, W3042-MFD, CW2442-MFD, CW2742-MFD MFD Profiles (Note: The Carlton, Fairmont & Fairmont CH door styles are open frame and do not have mullions) Itasca, Olmsted, Princeton/Princeton CH & Copenhagen Only Bottom opening expands for 30/36/42” high cabinets Mullion has matching ” bevel on inside prole Not recommended for Style-31 Ramsey Only Construction Modifications Open Frame Door Mullions not available Nicollet, Kingston Renville, Hampton Only 30/36” have 6 panes 42” have 8 panes Mullions have matching prole Wayzta & Wayzta CH Only Open Frame Door Mullions not available Inset Illustration shows face frame Design Note For alternate Mission style look order nished WEP and trim to t inside entire glass area or just the lower part. WEP Panel Mar 2016 c1 Wall Construction Options & Modifications Note: Standard wall cabinet box depth is 12” unless stated otherwise. This depth does not include the thickness of doors, drawer fronts, and bumpers. Caution: Installation of wall cabinets 30” wide or wider and/or 15” deep or deeper requires additional support such as attachment to ceiling, soft, or support from below. Failure to provide additional support may result in collapse of the cabinet, serious personal injury and/or property damage. Damage relating to installation failure is not covered by warranty. Hinges: All door hinges use Blum® with soft-close Compact Blumotion® built-in except for inset styles that use revealed barrel hinges. Wall Cabinet Construction Option Legend: Icons listed in this specication guide are shown below and indicate which construction option(s) are available for a particular cabinet and/or product. When a black square is included to the right of the acronym that option is available for that particular product. If a white square is shown, option is included as standard. Standard Wall Cabinet Modification Codes AFD Aluminum Framed Door FBE Finished Beaded End FE FFO W 18 30 24 R ID cabinet type width height depth hinge option Finished End Finished Front Only ID Increased Depth MI Matching Interior MBB Matching Beaded Back PEN Peninsula PFI Prepped For Insert RD Reduced Depth VDA Cabinet Nomenclature Void Door/Drawer Front All Design Note Standard Cabinet Construction - Natural Sealed Plywood Side: All cabinets are nished with a natural sealed plywood panel end and are not color specic to the face frame and door. Designer must identify nished ends for Left/Right/Both applications if factory applied. Cabinet end(s) will be furniture nished with a matching applied substrate at or beaded panel with plywood veneer. For a complete description please reference the Specications & Options section. Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 Wall Cabinets Wall Cabinets c2 Wall Cabinet 12” high, 2 doors Wall Cabinet 15” high, 2 doors 12” 12” Wall Cabinets 12” No shelf BUTT door cabinet FBE FE 12” 15” 18” 30”, 33”, 36” AFD Wall Cabinet 18” high, 2 doors W3012 W3312 W3612 30”, 33”, 36” No shelf BUTT door cabinet AFD FBE FE FFO W3015 W3315 W3615 24”, 27”, 30”, 33”, 36” No shelf BUTT door cabinet AFD FBE FFO FE ID ID FFO MI MI ID MBB MBB MI PEN PEN MBB PFI PFI PEN RD RD PFI VDA VDA W2418 W2718 W3018 W3318 W3618 RD VDA Wall Cabinet 18” high, 1 door Wall Cabinet 21” high, 2 doors Wall Cabinet 24” high, 2 doors 12” 12” 18” 21” 15”, 18”, 21” No shelf Single door cabinet AFD FBE FE FFO ID MI MBB PEN PFI RD VDA W1518 W1818 W2118 24” 30”, 33”, 36” 30”, 33”, 36” No shelf BUTT door cabinet AFD FBE FE FFO ID MI MBB PEN PFI RD VDA W3021 W3321 W3621 One adjustable shelf BUTT door cabinet AFD FBE FE W3024 W3324 W3624 FFO ID MI MBB PEN PFI RD VDA Mar 2016 c3 Wall Top Hinge Cabinet 15” & 18” high, 1 door Wall Top Hinge Refrigerator 15” & 18” high, 1 door 12" Give your design a hutch look by creating a wine rack, microwave space, storage area or bookcase feel with stacking wall cabinets. Below uses W1518 cabinets anking a wine rack. 24" 15" 18" 15" 18" AFD FBE FE WTH3015 WTH3018 WTH3615 WTH3618 AFD FBE FFO ID MI MBB PEN No shelf Blum adjustable lid stays (arms) supports door securely at any angles up to 105° 24” deep cabinet requires 3 points of attachment for proper installation Note: Only available with AFD option until Summer of 2016 when wood top hinge doors will become available. FE FFO ID MI MBB PFI PEN RD WTH301524 WTH301824 WTH361524 WTH361824 Note: Only available with AFD option until Summer of 2016 when wood top hinge doors will become available. PFI VDA RD VDA Design Note Design Note Use 24” deep Wall Refrigerator cabinet to build up for raised dishwasher for easy access. Also available is the KDC30/27 to only raise the dishwasher 7”. Field installation required. Use 18” high, 12” deep cabinet for an appliance garage application. DWR3 trimmed to fit (each side) WR301224 Mar 2016 Wall 18” high cabinet Wall Cabinets 30", 36" 30", 36" No shelf Blum adjustable lid stays (arms) supports door securely at any angles up to 105° Design Note c4 Wall Refrigerator Cabinet 12” high, 24” deep, 2 doors Wall Refrigerator Cabinet 15” high, 24” deep, 2 doors 24” 24” Wall Cabinets 12” 24” 15” 18” 30”, 33”, 36” No shelf 24” deep cabinet requires 3 points of attachment for proper installation BUTT door cabinet WR301224 WR331224 WR361224 AFD FBE FE Wall Refrigerator Cabinet 18” high, 24” deep, 2 doors 30”, 33”, 36” 30”, 33”, 36” No shelf 24” deep cabinet requires 3 points of attachment for proper installation BUTT door cabinet WR301524 WR331524 WR361524 AFD FBE FE FFO ID MI MBB MI MBB PEN MBB PEN PFI PEN PFI RD PFI RD VDA FBE FFO ID MI WR301824 WR331824 WR361824 AFD FE FFO ID No shelf 24” deep cabinet requires 3 points of attachment for proper installation BUTT door cabinet RD VDA VDA Design Note Wall Refrigerator Cabinet 21” high, 24” deep, 2 doors Wall Refrigerator Cabinet 24” high, 24” deep, 2 doors 24” 24” 21” 24” 30”, 33”, 36” No shelf 24” deep cabinet requires 3 points of attachment for proper installation BUTT door cabinet AFD FBE FE WR302124 WR332124 WR362124 30”, 33”, 36” Create a custom ‘built in refrigerator’ look with the DTEP3096 panel. Trim the DTEP panel to the refrigerator box depth to ensure that doors properly operate. Install the Wall Refrigerator (WR) above refrigerator and pull WR cabinet forward to depth of DTEP panel. Use a ller to ll in the gap between the WR cabinet and the refrigerator. Note: in illustration below the pantry cabinet has also been pulled to DTEP panel depth. filler used to fill gap between refrigerator & wall cabinet wall refrigerator (24” depth) cabinet pulled One full depth shelf 24” deep cabinet requires 3 points of attachment for proper installation BUTT door cabinet AFD FBE FFO FE ID FFO MI ID MBB MI PEN MBB PFI PEN RD PFI VDA RD VDA WR302424 WR332424 WR362424 12” d wall Pantry (24” depth) cabinet pulled to 30” 24” d base DTEP3096 trimmed to fit refrigerator depth Mar 2016 c5 Wall Cabinet 30” high, 1 door Wall Cabinet 30” high, 2 doors 12” 12” 12” 30” 2 adjustable shelves W930 W1230 W1530 W1830 W2130 FBE FE FFO ID Note: PFI not available for 9” wide cabinets. MI MBB PEN PFI RD VDA 42” 24”, 27”, 30”, 33”, 36” 9”, 12”, 15”, 18”, 21” 2 adjustable shelves BUTT door cabinet AFD FBE FE FFO W2430 W2730 W3030 W3330 W3630 ID 2 adjustable shelves 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” AFD W4230 FBE FE FFO MI ID MBB MI PEN MBB PFI PEN RD PFI RD VDA VDA Wall Cabinet 36” high, 1 door Wall Cabinet 36” high, 2 doors 12” 12” 36” 12” 36” 9”, 12”, 15”, 18”, 21” 2 adjustable shelves AFD FBE FE FFO ID MI MBB PEN PFI RD VDA Wall Cabinet 36” high, 2 doors W936 W1236 W1536 W1836 W2136 Note: PFI not available for 9” wide cabinets. 36” 24”, 27”, 30”, 33”, 36” 2 adjustable shelves BUTT door cabinet AFD FBE FE FFO W2436 W2736 W3036 W3336 W3636 42” 2 adjustable shelves 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” AFD FBE FE ID FFO MI ID MBB MI PEN MBB PFI PEN RD PFI VDA RD VDA Mar 2016 W4236 Wall Cabinets 30” 30” AFD Wall Cabinet 30” high, 2 doors c6 Wall Cabinet 42” high, 1 door Wall Cabinet 42” high, 2 doors Wall Cabinets 12” Wall Cabinet 42” high, 2 doors 12” 12” 42” 42” 42” 3 adjustable shelves BUTT door cabinet 3 adjustable shelves W942 W1242 W1542 W1842 W2142 AFD FBE FE FFO ID AFD FBE FE FFO Note: PFI not available for 9” wide cabinets. MI MBB 42” 24”, 27”, 30”, 33”, 36” 9”, 12”, 15”, 18”, 21” 3 adjustable shelves 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” W2442 W2742 W3042 W3342 W3642 AFD FE FFO ID ID MI MI MBB PEN MBB PEN PFI PEN PFI RD PFI RD VDA W4242 FBE RD VDA VDA Matching Frame Door 1 door Matching Frame Door 2 doors 12" 12" 30" 36" 42" 30" 36" 42" 15", 18" 15", 18" 15", 18" Mullion Fram e Mullion Fram e Open Frame Rockford, Mendota, Carlton, Dayton, Style-31, Cambridge, Fairmont, Austin & CH Lyndale, Baypor t Fairmont CH 30/36” high - 2 adjustable shelves 42” high - 3 adjustable shelves Matching Interior is standard AFD FBE FE FFO W1530-MFD W1830-MFD W1536-MFD W1836-MFD MBB PEN PFI W1542-MFD W1842-MFD NOTE: Glass is not included and door back routed to receive up to ” thick insert. 30" 30" 30/36” high - 2 adjustable shelves 42” high - 3 adjustable shelves, Butt doors Matching Interior is standard AFD FBE FE FFO ID ID MI 30" Mullion Fram e Mullion Fram e Open Frame Rockford, Mendota, Carlton, Dayton, Style-31, Cambridge, Fairmont, Austin & CH Lyndale, Baypor t Fairmont CH MI MBB W3030-MFD W3036-MFD W3042-MFD NOTE: Glass is not included and door back routed to receive up to ” thick insert. PEN PFI RD RD VDA VDA Mar 2016 c7 Blind Wall Corner Cabinet 2 doors Blind Wall Corner Cabinet Information UF3 UF3 Blind Wall Corner Cabinet 1 door 12” 12” Design Note Adjacent Cabinet A 30” 36” 42” Adjacent Cabinet UF3 filler 36” 30/36” high - 2 adjustable shelves 42” high - 3 adjustable shelves W12 door used (9” wide opening) Blanking panel installed on non-door side L/R refers to blind side left or right WBC27/3030-L WBC27/3030-R WBC27/3036-L WBC27/3036-R WBC27/3042-L WBC27/3042-R AFD FBE FE FFO ID MI FBE FE FFO ID NOTE: UF3 ller included for inside return installation of adjacent cabinet MBB PEN 30/36” high - 2 adjustable shelves 42” high - 3 adjustable shelves W24 doors used (21” wide opening) Blanking panel installed on non-door side BUTT door cabinet L/R refers to blind side left or right AFD MI MBB PEN WBC36/3930-L WBC36/3930-R WBC36/3936-L WBC36/3936-R WBC36/3942-L WBC36/3942-R NOTE: UF3 ller included for inside return installation of adjacent cabinet PFI PFI RD RD VDA VDA UF3 Wall Blind Peninsula Cabinet 30” high, 3 doors Wall Blind Corner Peninsula Cabinet Information 12” filler Adjacent Cabinet void space A 30” (hinge right shown) 2 shelves, butt door cabinet Peninsula cabinets require additional support Blanking panel installed on non-door side W12 door used (9” wide opening) W24 BUTT doors used (21” wide opening) L/R refers to blind side left or right AFD FBE WBCP2430-L WBCP2430-R FE FFO ID MI MBB PEN PFI RD VDA Mar 2016 NOTE: UF3 ller included for inside return installation of adjacent cabinet Minimum pull of 1” pull A B min. max. 25” 28 1/4” 13” 16 1/4” Minimum Pull 1” WBCP2430-L WBCP2430-R adjacent base cabinet wall B 24” void space B Adjacent Cabinet pull WBC27/30 WBC27/30 WBC36/39 WBC36/39 A B A B min. 27” 15” 37” 25” max. 28 1/4” 16 1/4” 40 1/4” 28 1/4“ wall 27” (hinge right shown) Wall Cabinets 30” 36” 42” c8 Wall Angle Corner Cabinet 1 door Matching Frame Door Wall Angle Corner Cabinet 1 door Wall Easy Reach Cabinet 1 door 30” 36” 42” 30" 36" 42" A 17½” B A FBE FE FFO ID MI Top View ” 24 12” 12” A B 12” 15” 24” 27” 30/36” high - 2 adjustable shelves 42” high - 3 adjustable shelves 27” deep cabinet requires 3 points of attachment for proper installation W15 door used (12” wide opening) AFD Top View B Top View WAC24 WAC27 ” A B 30” 36” 42” Mullion Fram e Mullion Fram e Open Frame Rockford, Mendota, Carlton, Dayton, Style-31, Cambridge, Fairmont, Austin & CH Lyndale, Baypor t Fairmont CH B 12” 24 Wall Cabinets 12” 12” WAC2430 WAC2436 WAC2442 WAC2730 WAC2736 WAC2742 MBB 17½” A 30/36” high - 2 adjustable shelves 42” high - 3 adjustable shelves 27” deep cabinet requires 3 points of attachment for proper installation W15 door used (12” wide opening) Matching Interior is standard on MFD cabinets AFD FBE FE FFO ID MI WAC2430-MFD WAC2436-MFD WAC2442-MFD WAC2730-MFD WAC2736-MFD WAC2742-MFD PEN PFI PFI RD RD VDA VDA AFD FBE FE FFO ID MI MBB WER2430 WER2436 WER2442 Inset doors for the WER cabinets open independent of each other and do not use bi-fold hinges. See illustration below. PEN PFI RD MBB PEN 2 adjustable shelves Bi-fold doors open 170° Cabinet opening width: 14” wide Inset: See Product Note below for door NOTE: Door back routed to receive up to ” thick insert. VDA Design Note To ensure proper door function, cabinets or other design elements deeper than 12” should not be placed on either side of the Wall Angle Corner cabinet. If the Wall Angle Corner cabinet is deeper than the adjacent cabinets, llers are recommended for placement left and right of the Wall Angle Corner to ensure proper door operation on standard depth wall cabinets. Cabinet sides should have WEP applied for this application to ush cabinet sides. Mar 2016 c9 Wall End Angle Cabinet 1 door Furniture Book Shelf Open Cabinet Wall Furniture Drawer 1 drawer box 12” 12” Top View 12” Adjacent Cabinet 17” 30/36” high - 2 adjustable shelves 42” high - 3 adjustable shelves W15 door used (12” wide opening) Soft Close door option not available 12” 18”, 24”, 30”, 36” FBE WEA1230 WEA1236 WEA1242 FBE FE FE MI MBB FWD1506 FWD1806 FWD2106 FWD2406 3 adjustable shelves - drill holes visible Top rail uses shaker valance design Cabinet has no bottom (open to ‘counter’) Matching interior included FFO ID FFO ID 48” Framed construction allows for stacking Full extension side-mounted drawer glides Stackable Drawer front 5½” high AFD AFD 15”, 18” 21”, 24” Inset CH Note: WEA cabinet is not available in any of the Inset CH lines because of hinge size is too large and will not allow inset cabinet door to close. MI Inset Style Note: Inset door styles have slab drawer fronts FBE PFI FE RD FFO FBS184812 FBS244812 FBS304812 FBS364812 ID VDA PEN AFD MI PFI MBB RD PEN VDA PFI RD VDA Wall Shelf End Cabinet Floating Shelf Specialty Wall Install Note 10" top and bottom 90° corners, shelves are clipped at 45° 30” 36” 42” Adjacent Cabinet 9” Top View 12” 1½” Hardwood face frame top & bottom Interior nished to match cabinet exterior Sides/backs engineered wood ¾” engineered wood shelves 42” - 3 shelves, 30/36” - 2 shelves Shelf corners clipped at 45° WES930 WES936 WES942 2½" 24",30",36",42" ¾” solid hardwood front/left/right prole ” MFD center core top & bottom with matching hardwood veneer exterior Floating shelf frame includes metal cantilever brackets, ½” plywood wall mounting strip and related fasteners. Mounting system is fully concealed once installed. Trimmable in depth to 2” (brackets may have to be trimmed) FLS24 holds maximum 30 lbs. FLS30 holds maximum 37 lbs. FLS36 holds maximum 45 lbs. FLS42 holds maximum 52 lbs. NOTES: Professional installation recommended Wall studs location need to be located for specic design shelf placement. Interior wall nailer (noggin) may need to be installed between studs to accommodate precise left/right design placement and required mounting strip and metal bracket placement when standard studs can’t accommodate design. (see diagram left) Mar 2016 When installing Floating Shelves the metal cantilever brackets must be attached to a wall stud or nailer (noggin) brace. Wall Cabinets 30” 36” 42” 6” c 10 Wall Open Cabinet 18” high, 30” wide, 12” deep Wall Microwave Shelf Cabinet 18” high, 30” wide, 12” deep 12” 12” Wall Cabinets 18” 12” 18” 18” 30” 18” Face frame only cabinet Matching melamine cabinet interior AFD Wine Storage Cabinet 18” high, 30” wide, 12” deep Cabinet interior & microwave shelf area nished with matching melamine veneer Microwave shelf ¾” solid wood and projects 6” beyond the cabinet face frame Microwave opening: 27” W x 15” H x 17 ½” D (including microwave shelf depth) Requires that cabinet be installed with 3 points of attachment for added support WOC3018 FBE FE FFO ID MI AFD MBB FBE PEN FE PFI FFO RD ID VDA MI WMSC3018 Holds 15-20 standard size wine bottles ¾” solid hardwood “x” shelf Matching melamine cabinet interior Requires that cabinet be installed with 3 points of attachment for added support AFD WSC3018 FBE FE FFO ID MI MBB PEN PFI RD MBB VDA PEN Design Note 30” 30” PFI The WOC3018 can be used as an open bookcase either in wall application or stacked with a W3012 for a base cabinet application. Apply OCM8 around the cabinet opening to provide added nishing detail. Design Note RD VDA Wall China Display Cabinet 18” high, 30” wide, 12” deep 96” 12” ¼” 1” OCM8 18” 1” The Wine Storage, Wall Open, Microwave Shelf and Wall China Display cabinets can all be used in a base application. Cabinets can be stacked with a W3012 or WR301224 for a cabinet application. For vertical applications (below) cabinet must be installed between 2 cabinets/wall or use a WBEP Wood Base End Panel for the end of the cabinet run. With vertical application cabinets do NOT have ¼” reveal. 30” 12” 15” clearance for plates Matching melamine cabinet interior Spindles are removable and must be eld installed Requires that cabinet be installed with 3 points of attachment for added support Accommodates 12 plates 15” clearance for plates AFD WCD3018 built up toe kick FBE FE WBEP with applied DDR2430 FFO ID MI ¾” For more base wine applications see p. d12 MBB PEN PFI RD VDA Mar 2016 c 11 Furniture Spice Drawer 6” high, 30” wide, 12” deep Furniture Wine Cube 6” high, 30” wide, 12” deep Design Note When using the WC630 (or SDC30H) it is always best to install in between two cabinets. But that is not always an option. Adjacent Cabinet 6” 6” 30” 12” Drawer fronts ” thick hardwood Vertical installation may require moldings which must be ordered separately Dovetail, hardwood drawer box construction Flush sides - no face frame with ¼” reveal Cabinet box is matching veneer ¾” engineered wood with nished stain or painted interior & exterior FSD306-H (horizontal) FSD306-V (vertical) AFD FBE 30” 12” Horizontal Application FE Horizontal Application Vertical installation may require moldings which must be ordered separately Flush sides - no face frame Cabinet box is matching veneer ¾” engineered wood with nished stain or painted interior & exterior Interior ‘cubby’ dimensions: 4” x 4” width/height will depend upon vertical or horizontal placement AFD If you need to use this application for the end of a run use the following as a guideline. When under mounting a FSD or FWC cabinet at the end of a cabinet run you need to nish the sides of both the wall and the WC630 cabinet because the FSD cabinet does not have any reveal. To do this rst apply WEP(1) panel to unnished side of wall cabinet. This panel will be the height of the wall cabinet. (you can order this factory installed.) Next under mount FSD or FWC cabinet and apply SM8 molding along the full height of both cabinets along the side return of the wall face frame - which extends the face frame ¼”. Last, nish the ‘reveal’ with WEP panel(2) the full height of both combined cabinets. FWC630 FBE FFO FE ID FFO MI ID MBB MI PEN MBB PFI PEN RD PFI VDA RD WEP panel(1) SCD W30 cabinet VDA Design Note Design Note FSD306-H can be used as a 12” deep base cabinet. Recommend placing cabinet between two cabinets. FWC630 can be used as a 6” wide wine rack for wall and base cabinet applications. Recommend placing cabinet between two cabinets. 6” 24” 12” SM8 molding FWC630 12” 30” 4½” built up toe kick built up toe kick WC630 Mar 2016 WEP panel(2) Wall Cabinets Adjacent Cabinet c 12 Range Wood Hood Classic Wall Cabinets 18¾" * Vent Hood Recommendation The range hoods have been designed for the Broan® Nutone® model #PM250 with liner LB36 36" 21" 30" 42" For more information on the product and/or how to purchase please contact Broan at www.broan.com 31" 40" 52" MODEL #PM250 POWER PACK 6" 24¾ " 10" Range hood for 30-36” cook top area Interior cabinet retrot of cabinet may be required for installation Interior dimensions for liner* 34½” W x 17¼” D x 5” H *vent hood and liner not available - please see recommendation Cabinet is congured using 33” wide wall cabinet, llers, and a valance. Cabinet will not have standard construction. Upper cabinet interior depth 17 5/8” Cabinet sides are nished with furniture end panel AFD FBE FE FFO LINER #LB30, #LB36 RHCL3631SH RHCL3640SH* RHCL3652SH* * Not recommended for 96” high ceiling ID MI MBB PEN PFI RD Install Note Recommend installing unit before hanging wood hood cabinet onto wall. Both liner and cabinet must be square for installation. Liner may need to be altered to t cabinet. VDA Mar 2016 d1 Base Cabinets Note: Standard base cabinet box depth is 24” unless stated otherwise. This depth does not include the thickness of doors, drawer fronts, and bumpers. Hardware: All door hinges use Blum® with soft-close Compact Blumotion® built-in except for inset styles that use revealed barrel hinges. All drawer hardware use Blum® Tandem full access, soft-close, drawer glides. (Exception: Wall Furniture Drawers) Base Cabinet Construction Option Legend: Icons listed in this specication guide are shown below and indicate which construction option(s) are available for a particular cabinet and/or product. When a black bullet is included to the right of the acronym that option is available for that particular product. Standard Base Cabinet Modification Codes AFD Aluminum Framed Door FBE Finished Beaded End FE FFO MI PEN B cabinet type 30 L RD width hinge option Finished End Finished Front Only Matching Interior Peninsula PFI Prepped For Insert RD Reduced Depth VDA Cabinet Nomenclature Void Door/Drawer Front All Super Sink Base Cabinet Modification Codes TOT Tilt-out Tray SBL Sink Base Liner PWB Pull-out Wire Basket TBR Towel Bar Design Note Standard Cabinet Construction - Natural Sealed Plywood Side: All cabinets are nished with a natural sealed plywood panel end and are not color specic to the face frame and door. Designer must identify nished ends for Left/Right/Both applications if factory applied. Cabinet end(s) will be furniture nished with a matching applied substrate at or beaded panel with plywood veneer. For a complete description please reference the Specications & Options section. Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 Base Cabinets Base Construction Options & Modifications d2 Base Cabinet 1 drawer box, 1 door 12”, 15”, 18”, 21” Base Cabinets 34½” Base Cabinet 1 drawer box, 2 doors 24”, 27”, 30”, 33”, 36” 24” B12 B15† B18† B21† FE FFO 1 full depth adjustable shelf BUTT door cabinet B24† B27 B30 B33 B36 AFD FBE FE FFO MI PEN PFI † Note: Top Drawer insert accessories available see page d11-d12 RD VDA 24” 24” 1 full depth adjustable shelf FBE 42” 34½” 34½” AFD Base Cabinet 2 drawer boxes, 2 doors 1 full depth adjustable shelf 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” 2 separate drawer boxes FBE FE MI FFO PEN MI PFI † Note: Top Drawer insert accessories available see page d11-d12 RD VDA B42 AFD PEN PFI RD VDA Base Cabinet Roll-Out Tray 1 drawer box, 1 door, 1 ROT 12”, 15”, 18”, 21” 34½” Base Cabinet Roll-Out Tray 1 drawer box, 1 door, 1 ROT FE FFO B12-ROT-1 B15-ROT-1† B18-ROT-1† B21-ROT-1† VDA 1 full depth adjustable shelf 1 full depth roll-out tray BUTT door cabinet AFD FBE FE FFO PEN RD 24” 24” MI PFI 34½” 34½” 1 full depth adjustable shelf 1 full depth roll-out tray FBE 42” 24”, 27”, 30”, 33”, 36” 24” AFD Base Cabinet Roll-Out Tray 2 drawer boxes, 2 doors, 2 ROT † Note: Top Drawer insert accessories available see page d12 B24-ROT-1† B27-ROT-1 B30-ROT-1 B33-ROT-1 B36-ROT-1 1 full depth adjustable shelf 2 separate full depth roll-out trays 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” 2 separate drawer boxes AFD FBE MI FE PEN FFO PFI RD VDA † Note: Top Drawer insert accessories available see page d12 B42-ROT2-1 MI PEN PFI RD VDA Mar 2016 d3 Base Cabinet Roll-Out Tray 1 drawer box, 1 door, 2 ROT 12”, 15”, 18”, 21” Base Cabinet Roll-Out Tray 1 drawer box, 2 doors, 2 ROT FE B12-ROT-2 B15-ROT-2† B18-ROT-2† B21-ROT-2† FFO 24” 2 full depth roll-out trays BUTT door cabinet AFD FBE FE FFO B24-ROT-2† B27-ROT-2 B30-ROT-2 B33-ROT-2 B36-ROT-2 4 separate full depth roll-out trays 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” 2 separate drawer boxes AFD MI MI FE PEN PEN FFO PFI RD VDA † Note: Top Drawer insert accessories available see page d12 PFI RD VDA † Note: Top Drawer insert accessories available see page d12 B42-ROT-2 FBE MI PEN PFI RD VDA Base Full Height Cabinet 1 door 9”, 12”, 15”, 18”, 21” 34½” No drawer box 1 full depth adjustable shelf AFD FBE FE FFO B9-FH B12-FH B15-FH B18-FH B21-FH Base Full Height Cabinet 2 doors Base Full Height Cabinet 2 door 42” 24”, 27”, 30”, 33”, 36” 34½” 34½” No drawer box 1 full depth adjustable shelf BUTT door cabinet No drawer box 1 full depth adjustable shelf 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” AFD FBE MI FE PEN FFO PFI MI RD PEN VDA PFI RD VDA B24-FH B27-FH B30-FH B33-FH B36-FH AFD FBE FE FFO MI PEN PFI RD VDA Mar 2016 B42-FH Base Cabinets 2 full depth roll-out trays FBE 34½” 24” 24” AFD 42” 24”, 27”, 30”, 33”, 36” 34½” 34½” Base Cabinet Roll-Out Tray 2 drawer boxes, 2 doors, 4 ROT d4 Base Full Height Cabinet Roll-Out Tray 1 door, 1 ROT 12”, 15”, 18”, 21” 34½” Base Full Height Cabinet Roll-Out Tray 2 doors, 1 ROT 24”, 27”, 30”, 33”, 36” 34½” Base Cabinets 24” B12-FH-ROT-1 B15-FH-ROT-1 B18-FH-ROT-1 B21-FH-ROT-1 FBE FE FFO 42” 34½” 24” No drawer box 1 full depth adjustable shelf 1 full depth roll-out tray AFD Base Full Height Cabinet Roll-Out Tray 2 doors, 2 ROT No drawer box 1 full depth adjustable shelf 1 full depth roll-out tray BUTT door cabinet B24-FH-ROT-1 B27-FH-ROT-1 B30-FH-ROT-1 B33-FH-ROT-1 B36-FH-ROT-1 AFD FBE FE FFO MI PEN PFI RD VDA 24” No drawer box 1 full depth adjustable shelf 2 separate full depth roll-out trays 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” B42-FH-ROT-1 AFD FBE MI FE PEN FFO PFI MI RD PEN VDA PFI RD VDA Base Full Height Cabinet Roll-Out Tray 1 door, 2 ROT 12”, 15”, 18”, 21” 34½” Base Full Height Cabinet Roll-Out Tray 2 doors, 2 ROT 24”, 27”, 30”, 33”, 36” 34½” 24” FBE FE FFO MI PEN PFI RD VDA 42” 34½” 24” No drawer box 2 full depth roll-out trays AFD Base Full Height Cabinet Roll-Out Tray 2 doors, 4 ROT B12-FH-ROT-2 B15-FH-ROT-2 B18-FH-ROT-2 B21-FH-ROT-2 24” No drawer box 2 full depth roll-out trays BUTT door cabinet AFD FBE FE FFO MI PEN PFI RD VDA B24-FH-ROT-2 B27-FH-ROT-2 B30-FH-ROT-2 B33-FH-ROT-2 B36-FH-ROT-2 No drawer box 4 separate full depth roll-out trays 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” AFD B42-FH-ROT-2 FBE FE FFO MI PEN PFI RD VDA Mar 2016 d5 Base Full Height Cabinet Roll Out Tray 1 door, 3 ROT 12”, 15”, 18”, 21” Base Full Height Cabinet Roll-Out Tray 2 doors, 3 ROT 34½” 24” FFO No drawer box 3 full depth roll-out trays BUTT door cabinet B24-FH-ROT-3 B27-FH-ROT-3 B30-FH-ROT-3 B33-FH-ROT-3 B36-FH-ROT-3 AFD FBE FE FFO MI PEN PFI RD VDA 24” No drawer box 6 separate full depth roll-out trays 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” AFD B42-FH-ROT-3 FBE MI FE PEN FFO PFI MI RD PEN VDA PFI RD VDA Drawer Base Cabinet 3 drawers Drawer Base Cabinet 2 drawers 12”, 15”, 18”, 21” 24”, 27”, 30”, 36” Drawer Base Cabinet 1 drawer 15”, 30”, 36” 24” 15” 34½” 34½” 21” 24” 24” 1 standard drawer 2 deep drawer Recessed door styles will have 1/2” solid wood center panels AFD FBE FE FFO MI PEN PFI DB12 DB15† DB18† DB21† DB24† DB27 DB30 DB36 NOTE: Inset Recessed Door Style Only 3 Drawer Base will have top drawer slab and bottom ‘deep’ drawers will be 5 piece drawer fronts with 1/2” solid wood reversed raised center panels Mar 2016 AFD FBE FE FFO MI PEN PFI RD RD VDA 2 deep drawers 5 piece drawer fronts Recessed door styles will have 1/2” solid wood center panels † Note: Top Drawer insert accessories available see page d12 VDA DB15-2 DB30-2 DB36-2 No toekick Cabinet has full box with oor 5 piece drawer front Recessed door styles will have 1/2” solid wood center panels AFD DB24-1 FBE FE FFO MI PEN PFI RD VDA Design Note Stack 2 DB24-1 to provide a 24” wide 2 deep drawer cabinet for the kitchen. The DB24-1 can be used for window seats, entertainment units, hutches. For boot locker application see Utility Cabinet section. Base Cabinets B12-FH-ROT-3 B15-FH-ROT-3 B18-FH-ROT-3 B21-FH-ROT-3 FE 34½” 24” No drawer box 3 full depth roll-out trays FBE 42” 24”, 27”, 30”, 33”, 36” 34½” AFD Base Full Height Cabinet Roll-Out Tray 2 doors, 6 ROT d6 Sink/Range Base Cabinet 1 door 21” Sink/Range Base Cabinet 2 doors 24”, 27”, 30”, 33”, 36” 34½” 24” Base Cabinets 42” 34½” 34½” 24” 24” No shelf No drawer box Drawer front is removable Includes Touch Up Kit SB21 AFD Sink/Range Base Cabinet 2 doors No shelf No drawer box Drawer front is removable BUTT door cabinet Includes Touch Up Kit FBE AFD FE FBE FFO FE MI FFO PEN TOT PFI SBL RD PWB VDA TBR SB21 can only t PWB or TBR not both. SB24† SB30 SB36 21” FBE MI TOT PFI SBL RD PWB † SBL n/a SB24, SB27 AFD n/a with TBR TBR Sink/Range Base Cabinet 2 doors MI TO PEN PFI SBL RD PWB VDA TBR 42” 34½” 34½” 24” 24” 24” No shelf No drawer box Includes Touch Up Kit SB21-FH No shelf No drawer box BUTT door cabinet Includes Touch Up Kit FBE AFD FE FBE FFO FE MI PEN TOT PFI SBL RD PWB VDA TBR SB21-FH can only t WBL/R or TBL/R not both. AFD n/a with TBL/R AFD n/a with TBR Sink/Range Base Cabinet 2 doors 24”, 27”, 30”, 33”, 36” 34½” AFD SB42 AFD FE VDA Sink/Range Base Cabinet 1 door SB27† SB33 FFO PEN AFD n/a with TBR No shelf No drawer box Drawer fronts removable from frame 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” Includes Touch Up Kit SB24-FH† SB30-FH SB36-FH SB27-FH† SB33-FH No shelf No drawer box 2 face frames joined to form cabinet front (3” center stile) gap between doors is ½” Includes Touch Up Kit AFD FFO FE MI FFO PEN TOT PFI SBL RD PWB VDA TBR † SBL n/a SB24-FH, SB27FH AFD n/a with TBL/R SB42-FH FBE MI PEN TOT PFI SBL RD PWB VDA TBR AFD n/a with TBL/R Mar 2016 d7 Super Sink Base Cabinet 2 doors 30”, 33”, 36” Super Sink Base Cabinet Factory Installed Accessories Apron Front/Farm Sink Design Note Tilt-out Utensil Tray (TOT) Stainless steel tray and hinges Slim prole May not work with all undermount sink types When designing with Apron/Farm Sink use Wall Refrigerator cabinet on a built up toe kick for base - cut out top of cabinet to allow for plumbing. Sink area can be trimmed with DWR3 cut in half for sink base “sides” with a ller placed horizontally between cabinet and sink. In eld trim and assembly required. 34½” le ilab 6 Ava g 201 in r p S No shelf No drawer box BUTT door cabinet Includes Touch Up Kit Factory installed accessories: - Tilt-out Tray (TOT) - Sink Base Liner (SBL) - Pull-out Wire Basket (PWB) - Towel Bar (TBR) See right for complete details AFD FBE FE FFO MI PEN PFI RD VDA le ilab 6 Ava g 201 in Spr UF342 Profile Sink Base Liner (SBL) Polystyrene liner Almond color to blend with standard interior Fit to bottom of sink base and will hold 1 gallon before excess water drains to front and onto oor alerting leak problem SB30-SS-L SB30-SS-R SB33-SS-L SB33-SS-R SB36-SS-L SB36-SS-R NOTE: L/R conguration calls out Wire Basket Pull-out install placement. Example: SB30-SS-L will have Wire Basket Pull-out installed on left side of cabinet interior with Towel Bar installed on inside of right door. Design Note le ilab 6 Ava g 201 in r p S Wire Basket Pull-out (PWB) Chrome wire Mounted to side of cabinet Left or Right Designed to allow room for most plumbing applications Ball-bearing glides mounted to side of cabinet with blocking to extend past open door All Super Sink Base factory installed accessories are available as indivdual modications on à la carte basis. 9" le ilab 6 Ava g 201 n i Spr 16" 9¾" ilab le 6 Ava g 201 Towel Bar (TBR) in Spr Chrome wire Mounted to side of door opposite of Pull-out wire basket Holds three towels Designed to keep towels away from door 12¾" 3½" Mar 2016 6½" WR362124 DWR3 cut in 1/2 and trimed to fit for each side built up toe kick Base Cabinets 24” Note: Confirm with sink manufacturer for full details of sink requirements for dimensions of WR cabinet and fillers. d8 Sink Front Angle 1 door & 2 doors Blind Peninsula Base Corner 2 doors, 1 drawer Blind Base Cabinet Corner 27” 30” 34½” 34½” UF3 30” 24” Base Cabinets 24” 24” Not trimmable Drawer front is removable Toe kick not included SFA36 opening: 12” Wide, single door SFA42 opening: 21” Wide, BUTT doors Requires FL4836 for oor assembly. Refer to Accessories Section for specications Vertical edges are mitered to attach to adjacent cabinet frames Does NOT include Touch Up kit 1 full depth adjustable shelf Drawer accessible one side only Can be used left or right UF3 ller included Blanking panel installed on back side BUTT door cabinet Roll Out Tray not available 3” wide AFD FBE FFO MI FBE 27” max FFO adjacent peninsula base cabinet MI PEN BPB24 PFI wall PFI MI A 36” 42” PEN CSF36 CSF42 RD B 17” 25 7/16” BBC36/39-L BBC36/39-R (shown above) FE PEN FFO RD AFD FE SFA36 SFA42 FE PFI 1 full depth adjustable shelf UF3 ller included BBC36/39 uses B12 door & drawer Blanking panel installed on non-door side filler BPB24 FBE AFD (blind right shown) void space filler VDA Caution: Minimum pull does not allow for decorative hardware RD VDA adjacent base cabinet A VDA wall adjacent cabinet A wall B Blind Peninsula Base Corner Full Height, 2 doors Blind Base Chart A adjacent cabinet BBC Cabinet 34½” wall SF fra adjacent base cabinet e m (front) void space B C adjacent frame filler 24” Design Note When placing a Sink/Range Base cabinet in a design, select a cabinet at least 3” wider than the sink or cooktop to allow for installation clips. Review manufacturer’s specications for dimensions and adequate clearance requirements. If a Corner Sink Base cabinet or Front is selected, remember to place the dishwasher a minimum of 15” from the cabinet to allow for adequate standing space and proper appliance door operation. No drawer box 1 full depth adjustable shelf UF3 ller included Blanking panel installed on back side BUTT door cabinet Roll Out Tray not available AFD FBE BPB24-FH actual cabinet width BBC36/39 BBC36/39 BBC42/45 BBC42/45 27” 27” 36” 36” pull min. max. A B A B 37” 13” 43” 19” 41 1/4” 17 1/4” 47 1/4” 23 1/4” FE FFO MI PEN PFI RD VDA Mar 2016 d9 Blind Base Cabinet Corner Blind Base Cabinet Corner Lazy Susan 39” Design Note To ensure proper door function on corner cabinet 3” ller must be used for placement between the cabinet and any appliance deeper than 24”. UF3 39” 34½” UF3 34½” Design Note 24” 24” (blind right shown) Lazy Susan unit is 35” ‘half moon’ rotating hardwood shelves (LZ35H) UF3 ller included BBC42/45 uses B18 door & drawer Blanking panel installed on non-door side 1 full depth adjustable shelf UF3 ller included BBC42/45 uses B18 door & drawer Blanking panel installed on non-door side AFD FBE BBC42/45-L BBC42/45-R (shown above) AFD FBE FE FE FFO FFO MI MI PEN PEN PFI RD Caution: Minimum pull does not allow for decorative hardware PFI RD VDA VDA BBC42/45-LS-L BBC42/45-LS-R (shown above) Inset CH Note: BBC Corner Lazy Susan cabinet is not available in any of the Inset CH lines because of hinge size is too large and will not allow lazy susan half moon to operate. Caution: Minimum pull does not allow for decorative hardware built up toekick Design Note Design Note To ensure proper door function on corner cabinet 3” ller must be used for placement between the cabinet and any appliance deeper than 24”. FOL ONLY: Extend the pull of a blind cabinet from wall with OVF630 overlay ller BBC Cabinet open space (face frame) OVF630 is cut to fit and overlaps open space of face frame Must be applied on top of filler and face frame of BLB. NOTE: OVF630 is only 5 1/2” wide Mar 2016 CW2730 void space filler adjacent cabinet Base Cabinets (blind right shown) For diagonal corner base use WAC2730. Field install Toekick and pull forward from wall 9” (creates void area, see 17½” dashed line) to have 24” deep diagonal ‘base’ with easy reach access. With all corner base 30” applications be aware of hardware interfering with drawer box. d 10 Corner Base Cabinet Easy Reach Corner Base Cabinet Super Susan A A A Base Waste Cabinet 1 waste container A 15” A A A A top view top view 24” 24” 34½” 34½” 34½” Base Cabinets 24” 24” 1 full depth adjustable shelf Doors open 170° Cabinet opening width: 36 = 14”, 33 = 10” Inset: See Product Note below for hinging 24” 1 wood spin unit xed to ¾” adjustable shelf 1 wood spin unit xed to oor Doors open 170° Cabinet opening width: 36 = 14”, 33 = 10” Inset: See Product Note to right for hinging A (wall space) A (wall space) AFD FBE 33” 36” BER33 BER36 Cabinet included with face mount door One 35 qt. white waste container One small tray to hold trash bags Heavy duty, steel, ball bearing, side mounted, full extension glides AFD FBE BER33-SS BER36-SS 33” 36” FBE FE FE FE FFO FFO FFO MI PEN PFI RD VDA Note: BER33 Raised Panel styles will have coordinating recessed (at) center panel, Miter and Slab doors will have slab door fronts MI PEN PFI RD Caution: BER36 requires 34½” to t through entryway, BER33 requires 33½”. VDA Note: BER33 Raised Panel styles will have coordinating recessed (at) center panel, Miter and Slab doors will have slab door fronts Caution: BER36-SS requires 34½” to t through entryway, BER33-SS requires 33½”. Install Note Install Note To ensure proper door function use 3” ller for placement between the cabinet and any appliance deeper than 24”. To ensure proper door function use 3” ller for placement between the cabinet and any appliance deeper than 24”. BWB15† AFD MI PEN PFI † Note: Top Drawer insert accessories available see page d12 RD VDA Base Waste Cabinet 2 waste containers 18” Construction Note A Inset Product Note 34½” Inset doors for the BER cabinets open independent of each other and do not use bi-fold hinges. See illustration below. A 24” B l al w l al w top view Cabinet included with face mount door Two 35 qt. white waste containers Heavy duty, steel, ball bearing, side mounted, full extension glides AFD A B BER33 9” 12” BER36 11” 15” BWB18† FBE FE FFO MI PEN PFI RD VDA † Note: Top Drawer insert accessories available see page d12 Mar 2016 d 11 Tray Base Cabinet 1 drawer box, 1 door Base Filler Storage Pull Out Organizer 12",15",18",21" Drawer Organizer Insert 15”, 18”, 21”, 24” UF642 (included) OVF630 Sold separately Not needed for Inset styles only for FOL 34½" 34½” 24” 1 drawer box Number of tray dividers listed below ¾” plywood dividers are removable BTB12 (2 dividers) BTB15† (2 dividers) BTB18† (3 dividers) BTB21† (3 dividers) AFD FBE FE FFO Note: Reduce Depth only available to 12” MI PEN PFI † Note: Top Drawer insert accessories available see page d12 RD VDA THIS IS NOT A CABINET No cabinet frame 2 adjustable shelves Face mount UF642 included, requires trim to height & eld installation FOL requires face mount OVF630 ller door styles eld installation required Must be installed between 2 cabinets Glides are mounted to adjacent cabinets Heavy duty, side mounted, full extension, steel, ball bearing glides with hardwood frame Requires opening width of 6” Only available for standard base cabinet 1 drawer box 1 full depth adjustable shelf Dividers ½” solid hardwood, 2¼” high ¼” Plywood base with melamine top Natural nish Measurements below refer to outer cabinet widths - not insert dimension Cutlery Tray Divider AFD FBE BFS6 FE B15-CTK B18-CTK B21-CTK B24-CTK FFO 15” 18” MI PEN PFI RD VDA Tray Base Full Height 1 door Base Storage Pull Out Organizer 9",12",15",18",21" 9”, 12” FBE 34½” FE B15-UTK B18-UTK B21-UTK B24-UTK FFO 24" 21” 24” Utensil Tray Divider AFD 34½" Note: See page g11 for complete product details 15” 18” MI 24” PEN No drawer box Number of tray dividers listed below ¾” plywood dividers are removable AFD FBE FE FFO MI PEN PFI RD VDA BTB9-FH (1 divider) BTB12-FH (2 dividers) BTB15-FH (2 dividers) BTB18-FH (3 dividers) BTB21-FH (3 dividers) Note: Reduce Depth only available to 12” Cabinet included Face mount door Standard 9” & 12” wide full height door 3 adjustable shelves Heavy duty, steel, ball bearing, side mounted, full extension glides AFD FBE BSP09 BSP12 PFI RD VDA Note: See page g11 for complete product details 21” 24” Knife Block Kit AFD FE FBE FFO FE MI FFO PEN MI PFI PEN RD PFI VDA RD VDA B15-KBK B18-KBK B21-KBK B24-KBK 15” 18” Note: See page g11 for complete product details 21” 24” Mar 2016 Base Cabinets 24" d 12 Wood Cutlery 2-Tiered Drawer Factory Installed Accessory 12" 9" 3¾" 21" 15" 3¾" 21" Base Cabinet 2-Tier Top Drawer AFD 15", 18", 21", 24" FBE FE FE FFO 34½" FFO MI 15", 18", 21", 24" 24" Base Cabinet 2 Roll Out Trays 2-Tier Top Drawer AFD FE 34½" FFO PEN 24" PFI RD RD RD VDA VDA VDA B15-WTCD B18-WTCD B21-WTCD B24-WTCD (2 door cabinet) Drawer Base Cabinet 2-Tier Top Drawer AFD 15", 18", 21", 24" 1 wood 2-tier drawer 1 full depth adjustable shelf 1 full depth roll-out tray B15-ROT-1-WTCD B18-ROT-1-WTCD B21-ROT-1-WTCD B24-ROT-1-WTCD (2 door cabinet) Tray Base Cabinet 2-Tier Top Drawer AFD FBE FBE FE FE FFO 34½" FFO 15", 18", 21" B15-ROT-2-WTCD B18-ROT-2-WTCD B21-ROT-2-WTCD B24-ROT-2-WTCD (2 door cabinet) Base Waste Cabinet 2-Tier Top Drawer FBE FE 34½" FFO MI MI PEN PEN PFI 24" PFI RD RD RD VDA VDA VDA 1 wood 2-tier drawer See page d5 for drawer base details DB15-WTCD DB18-WTCD DB21-WTCD DB24-WTCD 15", 18" AFD MI 24" 24" 1 wood 2-tier drawer 2 full depth roll-out trays PEN PFI 34½" MI PFI 1 wood 2-tier drawer 1 full depth adjustable shelf 15", 18", 21", 24" FBE PEN PFI Base Cabinets 20 7/16" Bottom drawer ¾” hardwood sides, dovetail joints ¼” plywood bottom Blum® full access, concealed, undermount, steel, soft close, drawer glides MI PEN 21” 17 7/16" Base Cabinet Roll Out Tray 2-Tier Top Drawer FBE 3¾" 3¾" Top drawer ½” solid hardwood sides steel, side mounted glides slides independently front to back ¼” plywood bottom AFD 20¼" 21" 14 7/16" 11 7/16" Single, two tiered drawer for top drawer only Three-quarter access to bottom tray ½” solid hardwood dividers Drawer interior heights: 1¼” Natural birch hardwood & plywood nish 18" 20¼" 20¼" 20¼" 1 wood 2-tier drawer Number of tray dividers listed below ¾” plywood dividers are removable BTB15-WTCD (2 dividers) BTB18-WTCD (3 dividers) BTB21-WTCD (3 dividers) 34½" 24" 1 wood 2-tier drawer See page d10 for waste cabinet details BWB15-WTCD (1 - 35 qt. container) BWB18-WTCD (2 - 35qt. containers) Mar 2016 d 13 Desk File Drawer Cabinet 28½” high, 21” deep Base End Angle Full Height 12” 15”, 18” 12” 21” 12” top view 5” 12” 24” 34½” 45° 24” 30” 28½” 21” (right shown) BEA12-FH-L BEA12-FH-R FBE 1 standard drawer box 1 deep drawer box for le that ts both legal and letter size documents FE FFO AFD MI FBE FFD15 FFD18 AFD FE FFO PEN FE MI PFI FFO PEN MI PFI Caution: Cabinet minimum depth is 18” RD VDA FDD-30/27 FBE PEN RD PFI VDA RD VDA Base Shelf Organizer Kneehole Drawer 24” deep, 1 drawer 12” 24” 24” 12” 7” top view 30” 34½” top and bottom corner 90° shelves 45° clip corner 1½” Hardwood face frame top & bottom Interior nished to match cabinet exterior Sides/backs engineered wood ¾” engineered wood shelves Distance between shelves: 8 ¼” Shelf corners clipped at 45° BES12 Trimmable to 27” wide Standard dovetail drawer (for B27 cabinet) Must be installed between 2 cabinets or nished panel Full, 24” depth, cabinet box frame for stacking drawers AFD FBE FE FFO MI PEN PFI RD VDA Mar 2016 Furniture Wall Drawer 1 drawer box FKD-30/27 6” 12” 15”, 18” 21”, 24” Framed construction allows for stacking Full extension side-mounted drawer glides AFD FBE FE FWD1506 FWD1806 FWD2106 FWD2406 FFO MI PEN PFI RD VDA Inset Style Note: Inset door styles have slab drawer fronts Base Cabinets Trimmable to 27” wide Standard dovetail drawer (for B27 cabinet) Must be installed between 2 cabinets or nished panel All styles have slab drawer front No bottom face frame rail Desk drawer is NOT stackable 17” 1 Adjustable shelf AFD Desk Drawer 21” deep, 1 drawer d 14 Furniture Book Shelf Wall Cabinet Furniture Book Shelf Tall Cabinet 12” 12” 48” Base Cabinets 84” 18”, 24”, 30”, 36” 3 adjustable shelves - drill holes visible Top rail uses shaker valance design Cabinet has no bottom (open to ‘counter’) Matching interior included AFD FBE FE FFO MI FBS184812 FBS244812 FBS304812 FBS364812 18”, 24”, 30”, 36” 6 adjustable shelves - drill holes visible Top rail uses shaker valance design Cabinet has standard toekick ‘notch’ Matching interior included AFD FBE PEN FE PFI FFO RD MI VDA PEN FBS188412 FBS248412 FBS308412 FBS368412 PFI RD VDA Mar 2016 d 15 Design Note: Base Wine Applications Base Wine Horizontal Base Wine Vertical The Wine Storage, Wall Open, Microwave Shelf and Wall China Display cabinets can all be used in a base application. Cabinets can be stacked with a W3012 or WR301224 for a cabinet application. For vertical application (below) WR301224 must be installed between 2 cabinets/wall or use a WBEP Wood Base End Panel for the end of the cabinet run. With vertical application cabinet does NOT have ¼” reveal. 12” 12” WSC3018 built up toe kick WBEP with applied DDR2430 W301224 Plan a Hutch/Pantry area for custom storage. Tray Base cabinets serve as a great vertical storage combined with a Utility cabinet, RollOut Trays, Increased Depth (ID) wall cabinets or a wine storage to create a truly unique storage center. Instead of using a row of ‘at’ pantry cabinets use varied depths of cabinets to produce a design focal point. ¾” Base Wine Cubby Combine WC630 for a 12” deep wine rack for base or wall application. WC630 is 6” wide. 6” W3030 ID to 18” 24” 12” 12” d wall 30” FWC630 4½” WSC3018 pulled 6” built up toe kick 12” 24” d base qty. 2 BTB15-FH built up toe kick FWC630 Mar 2016 Base Cabinets built up toe kick d 16 Base Cabinets Notes Mar 2016 e1 Utility Cabinets Utility Construction Options & Modifications Note: Utility cabinets box depth is 12” or 24” unless stated otherwise. This depth does not include the thickness of doors, drawer fronts, and bumpers. Utility Cabinet Construction Option Legend: Icons listed in this specication guide are shown below and indicate which construction option(s) are available for a particular cabinet and/or product. When a black bullet is included to the right of the acronym that option is available for that particular product. Standard Utility Cabinet Modification Codes AFD Aluminum Framed Door FBE Finished Beaded End FE FFO MI U cabinet type 15 12 84 R FE width depth height hinge option Finished End Finished Front Only Matching Interior PFI Prepped For Insert RD Reduced Depth VDA Cabinet Nomenclature Void Door/Drawer Front All Design Note Standard Cabinet Construction - Natural Sealed Plywood Side: All cabinets are nished with a natural sealed plywood panel end and are not color specic to the face frame and door. Designer must identify nished ends for Left/Right/Both applications if factory applied. Cabinet end(s) will be furniture nished with a matching applied substrate at or beaded panel with plywood veneer. For a complete description please reference the Specications & Options section. Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 Utility Cabinets Hardware: All door hinges use Blum® with soft-close Compact Blumotion® built-in except for inset styles that use revealed barrel hinges. All drawer and roll-out tray hardware use Blum® Tandem full access, soft-close, drawer glides. e2 Utility Cabinet 84” high, 12” deep, 2 doors Utility Cabinet 90” high, 12” deep, 2 doors 15”, 18” 15”, 18” 90” Utility Cabinets 84” 5 full depth adjustable shelves, all with locking clips AFD FBE U158412 U188412 12” 5 full depth adjustable shelves, all with locking clips AFD FBE 15”, 18” 96” 12” 12” Utility Cabinet 96” high, 12” deep, 2 doors U159012 U189012 5 full depth adjustable shelves, all with locking clips 4-piece unassembled 4½” inset toe kick box shipped loose inside cabinet AFD FE FE FFO FFO FE MI MI FFO PFI PFI MI RD RD PFI VDA VDA FBE U159612 U189612 NOTE: Cabinet ends unnished - for 96” height FBE, FE not available (Order TEP or BTEP separately & trim panel in eld for application) RD VDA Utility Cabinet 84” high, 12” deep, 4 doors Utility Cabinet 90” high, 12” deep, 4 doors 24” 84” U248412 12” 5 full depth adjustable shelves, all with locking clips BUTT door cabinet AFD FBE FBE FE FE FFO FFO MI MI PFI PFI RD RD VDA VDA 24” 96” 12” 5 full depth adjustable shelves, all with locking clips BUTT door cabinet AFD 24” 90” 12” Utility Cabinet 96” high, 12” deep, 4 doors U249012 5 full depth adjustable shelves, all with locking clips 4-piece unassembled 4½” inset toe kick box shipped loose inside cabinet BUTT door cabinet AFD U249612 FBE FE FFO MI PFI NOTE: Cabinet ends unnished - for 96” height FBE, FE not available (Order TEP or BTEP separately & trim panel in eld for application) RD VDA Mar 2016 e3 Utility Cabinet 84” high, 24” deep, 2 doors Utility Cabinet 90” high, 24” deep, 2 doors 15”, 18” 84” 15”, 18” 5 full depth adjustable shelves, all with locking clips FBE 24” 24” U158424 U188424 5 full depth adjustable shelves, all with locking clips AFD FBE U159024 U189024 5 full depth adjustable shelves, all with locking clips 4-piece unassembled 4½” inset toe kick box shipped loose inside cabinet AFD FE FE FFO FFO FE MI MI FFO PFI PFI MI RD RD PFI VDA VDA FBE U159624 U189624 NOTE: Cabinet ends unnished - for 96” height FBE, FE not available (Order TEP or BTEP separately & trim panel in eld for application) RD VDA Utility Cabinet 84” high, 24” deep, 4 doors Utility Cabinet 90” high, 24” deep, 4 doors 24”, 30”, 36” 24”, 30”, 36” 90” 84” 5 full depth adjustable shelves, all with locking clips BUTT door cabinet AFD FBE FE U248424 U308424 U368424 24”, 30”, 36” 96” 24” 24” Utility Cabinet 96” high, 24” deep, 4 doors 24” 5 full depth adjustable shelves, all with locking clips BUTT door cabinet AFD FBE FE U249024 U309024 U369024 5 full depth adjustable shelves, all with locking clips 4-piece unassembled 4½” inset toe kick box shipped loose inside cabinet BUTT door cabinet AFD FBE FFO FFO FE MI MI FFO PFI PFI MI RD RD PFI VDA VDA RD VDA Mar 2016 U249624 U309624 U369624 NOTE: Cabinet ends unnished - for 96” height FBE, FE not available (Order TEP or BTEP separately & trim panel in eld for application) Utility Cabinets 24” 15”, 18” 96” 90” AFD Utility Cabinet 96” high, 24” deep, 2 doors e4 Utility Cabinet Roll-Out Tray 84” high, 24” deep, 2 doors Utility Cabinet Roll-Out Tray 90” high, 24” deep, 2 doors 15”, 18” Utility Cabinets 84” 24” 96” 24” 1 full depth adjustable upper shelf with locking clips 4 roll-out trays installed lower section FBE 15”, 18” 15”, 18” 90” AFD Utility Cabinet Roll-Out Tray 96” high, 24” deep, 2 doors U158424-ROT-4 U188424-ROT-4 24” 1 full depth adjustable upper shelf with locking clips 4 roll-out trays installed lower section AFD FBE U159024-ROT-4 U189024-ROT-4 1 full depth adjustable upper shelf with locking clips 4 roll-out trays installed lower section 4-piece unassembled 4½” inset toe kick box shipped loose inside cabinet AFD FBE FE FE FFO FFO FE MI MI FFO PFI PFI MI RD RD PFI VDA VDA U159624-ROT-4 U189624-ROT-4 NOTE: Cabinet ends unnished - for 96” height FBE, FE not available (Order TEP or BTEP separately & trim panel in eld for application) RD VDA Utility Cabinet Roll-Out Tray 84” high, 24” deep, 4 doors Utility Cabinet Roll-Out Tray 90” high, 24” deep, 4 doors 24”, 30”, 36” 84” 24”, 30”, 36” 90” 24” AFD FBE FE U248424-ROT-4 U308424-ROT-4 U368424-ROT-4 24”, 30”, 36” 96” 24” 24” 1 full depth adjustable upper shelf with locking clips 4 roll-out trays installed lower section BUTT door cabinet Utility Cabinet Roll-Out Tray 96” high, 24” deep, 4 doors 1 full depth adjustable upper shelf with locking clips 4 roll-out trays installed lower section BUTT door cabinet AFD FBE FE FFO FFO MI MI PFI PFI RD RD VDA VDA U249024-ROT-4 U309024-ROT-4 U369024-ROT-4 1 full depth adjustable upper shelf with locking clips 4 roll-out trays installed lower section 4-piece unassembled 4½” inset toe kick box shipped loose inside cabinet BUTT door cabinet AFD FBE FE FFO MI PFI U249624-ROT-4 U309624-ROT-4 U369624-ROT-4 NOTE: Cabinet ends unnished - for 96” height FBE, FE not available (Order TEP or BTEP separately & trim panel in eld for application) RD VDA Mar 2016 e5 Oven Drawer Cabinet 84” high Oven Drawer Cabinet 90” high Oven Drawer Cabinet 96” high Full Overlay Full Overlay Full Overlay 3” 33” 3” 3” 33” 3” 3” 14” 33” 3” 20” 26” 9” 84” 9” 90” A 96” 9” A B A B 9” 4½” 9” 4½” 9” 4½” 24” 24” 24” Inset Inset 3” 33” Inset 3” 3” 33” 3” 3” 14” 33” 3” 20” 26” 9” 84” 9” 90” A 96” 9” A B A B B 7¾” 5¾” 7¾” 5¾” 7¾” 5¾” 24” 24” No shelf Outside cabinet stiles (3” wide) provide 1¾” face frame reveal BUTT door cabinet 24” 1 full depth adjustable upper shelf with locking clips Outside cabinet stiles (3” wide) provide 1¾” face frame reveal BUTT door cabinet AFD OVD3384 FBE NOTE: Uses W3018 Butt Doors & B30 Drawer Front FE FFO AFD FBE FE MI FFO PFI OVD3390 NOTE: Uses W3024 Butt Doors & B30 Drawer Front MI RD PFI Oven Cabinet Cut Out Dimensions B Actual 40” *By removing drawer unit frame rail maximum cutout height is 61” Mar 2016 B Max* 52” NOTE: Uses W3030 Butt Doors & B30 Drawer Front MI VDA A Max 31” OVD3396 FBE FFO RD A Actual FOL & Inset 27” AFD FE PFI VDA 2 full depth adjustable upper shelves with locking clips Outside cabinet stiles (3” wide) provide 1¾” face frame reveal 4-piece unassembled 4½” inset toe kick box shipped loose inside cabinet BUTT door cabinet RD VDA NOTE: Cabinet ends unnished - for 96” height FBE, FE not available (Order TEP or BTEP separately & trim panel in eld for application) Install Note Check oven manufacturer’s specications for adequate clearance and required installation materials. Shelf above drawer box area is ¾” thick for appliance build up support Utility Cabinets B e6 Design Note Design Note Ordering parts separately for eld installation & assembly stack FKD-30/27 on top of built up toekick. Trim RR96 (right and left side) to t height under Wall Refrigerator (WR) cabinet, depending on 84”/90”/96” height. Trim space with UF6 llers to t oven cabinet requirements. Apply TEP to skin sides of cabinet. Field & Trim Installation Required: Boot locker base unit is built using base one drawer (DB24-1- 24” w, 15” high). The counter top is RR96 cut down and trimmed with CTM8 molding. The coat rack area uses RR96 for sides and center divider. Shaker Valance is used but crown valance or OGP8 inverted or a 6” ller are options that can be used. Width of unit may vary depending on top cabinets (30”, 33”, 36”) Top shelf is made up of WBEP (or RR96) and has CTM8 trim on front. The bottom shelf area is framed with UF342 on top and bottom with RR96 oor and applied BEP cut and trimmed for sides with WBEP shelf. Optional back panel of FP4896 can be used. Utility Cabinets For top a WR 12”/15”/21” high can be used to create additional opening space. For an alternative base use Standard Base, Drawer Base, stack multiple FKD-30/27 or any height WR cabinets to create single oven or combination unit for opening requiring multiple heights and widths. 24” W1230 VSH30 30” CTM8 84” WR301824 90” WR302424 96” WR302424* CTM8 84” RR96 applied TEP UF6 RR96 MAX opening 84” = 59” 90“ = 59” 96“ = 58” RR96 *For 96” high use WR 24” H with second FKD-30/27 stacked and trim UF6 filler to fit opening 84” 90” 96” RR96 RR96 UF342 21” DB24-1 applied BEP built up toe kick OGP8 DB24-1 WBEP applied BEP (both sides) UF6 FKD-30/27 built up toe kick Mar 2016 f1 Vanity Cabinets Vanity Construction Options & Modifications Note: Standard vanity cabinet box depth is 21” unless stated otherwise. This depth does not include the thickness of doors, drawer fronts, and bumpers. Standard Vanity cabinet height is 34½”. Hardware: All door hinges use Blum® with soft-close Compact Blumotion® built-in except for inset styles that use revealed barrel hinges. All drawer hardware use Blum® Tandem full access, soft-close, drawer glides. (Exception: Wall Furniture Drawers) Standard Cabinet Modification Codes AFD FBE FE FFO Aluminum Framed Door Finished Beaded End V cabinet type 18 L RD width hinge option Finished End Finished Front Only ID Increased Depth MI Matching Interior PFI Prepped For Insert RD Reduced Depth VDA Cabinet Nomenclature Void Door/Drawer Front All Design Note Standard Cabinet Construction - Natural Sealed Plywood Side: All cabinets are nished with a natural sealed plywood panel end and are not color specic to the face frame and door. Designer must identify nished ends for Left/Right/Both applications if factory applied. Cabinet end(s) will be furniture nished with a matching applied substrate at or beaded panel with plywood veneer. For a complete description please reference the Specications & Options section. Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 Vanity Cabinets Vanity Cabinet Construction Option Legend: Icons listed in this specication guide are shown below and indicate which construction option(s) are available for a particular cabinet and/or product. When a black bullet is included to the right of the acronym that option is available for that particular product. f2 Vanity Sink Base 34½” high, 1 door 18”, 21” Vanity Sink Base 34½” high, 2 doors Vanity Sink Base 34½” high, 2 doors 24”, 27”, 30”, 33”, 36” 34½” 42” 34½” 34½” 21” 21” 21” No shelf or drawer box Drawer front removable from frame VSB18 VSB21 AFD Vanity Cabinets FBE No shelf or drawer box Drawer front removable from frame BUTT door cabinet VSB24 VSB27 VSB30 VSB33 VSB36 AFD FE FBE FFO FE ID FFO MI ID No shelf or drawer box Two face frames attached to form cabinet front (3” middle stile) gap in between doors will not represent full overlay style Drawer fronts removable from frame FBE FE FFO PFI MI ID RD PFI MI RD PFI VDA VSB42 AFD VDA RD VDA Vanity Base Cabinet 34½” high, 1 drawer box, 1 door Vanity Sink Base Full Height 34½” high, 1 door 12”, 15”, 18” Vanity Sink Base Full Height 34½” high, 2 doors 18”, 21” 24”, 27”, 30”, 33”, 36” 34½” 34½” 34½” 21” 21” 21” 1 standard drawer box No shelf AFD FBE FE FFO VB12 VB15 VB18 No shelf No drawer front AFD FBE VSB18-FH VSB21-FH No shelf No drawer front BUTT door cabinet FE AFD FFO FBE ID FE ID MI FFO MI PFI ID PFI RD MI RD VDA PFI VDA VSB24-FH VSB27-FH VSB30-FH VSB33-FH VSB36-FH RD VDA Mar 2016 f3 Vanity Drawer Base Cabinet 34½” high, 3 drawers Vanity Drawer Base Cabinet 34½” high, 2 deep drawers Vanity Combo Cabinet 34½” high, sink base/drawer base 15” 12”, 15”, 18” 24”, 30”, 36” A B 34½” 34½” 34½” 21” 21” FBE FE (DB right shown) 2 deep drawer Top drawer fronts removable 2 face frames attached to form cabinet face frame VDB15-2 AFD VDB12 VDB15 VDB18 AFD 21” 2 deep drawer box 5 piece drawer fronts 1 standard drawer 2 deep drawer FBE FE FFO FFO ID MI PFI RD FBE MI FE PFI FFO RD ID VDA VDA VCD24-L (1 door) VCD24-R (1 door) VCD30-L (1 door) VCD30-R (1 door) VCD36-L (2 doors) VCD36-R (2 doors) A B 12” 12” 12” 18” 12” 24” 12” 12” 18” 12” 24” 12” MI PFI RD VDA Vanity Combo Cabinet 34½” high, 1 sink base/ 2 base Vanity Combo Cabinet 34½” high, 2 sink base/ drawer base 42”, 48” 12” A 48” 12” 18” 12” 42”, 48” 18” 34½” 21” A AFD FBE 18” 24” 1 standard drawer box Sink drawer fronts removable 3 face frames attached to form cabinet face frame AFD VSB3D48 A FBE FE AFD FFO FBE FE FFO MI FFO ID PFI ID MI RD MI PFI VDA PFI RD RD VDA VDA Mar 2016 12” 2 standard drawer boxes 4 deep drawer box Sink drawer front removable 3 face frames attached to form cabinet face frame VSB6D42 has single door center sink base that will be hinged left ID FE A 21” 21” 2 standard drawer boxes Sink drawer front removable 3 face frames attached to form cabinet face frame VSBD42 has single door center sink base that will be hinged left 12” 34½” 34½” VSBD42 VSBD48 Vanity Combo Cabinet 34½” high, sink base/ 2 drawer base VSB6D42 VSB6D48 18” 24” Vanity Cabinets NOTE: Austin Door Style Only 3 Drawer Base will have top drawer slab and bottom ‘deep’ drawers will be 5 piece drawer fronts ID AFD f4 Vanity Linen Cabinet 21” deep, 2 doors Desk File Drawer Cabinet 28½” high, 21” deep Desk Drawer 21” deep, 1 drawer 18” 15”, 18” 21” 5” 30” 84” AFD FDD-30/27 FBE FE 21” Vanity Cabinets 28½” Trimmable to 27” wide Standard dovetail drawer (for B27 cabinet) Must be installed between 2 cabinets or nished panel All styles have slab drawer front No bottom face frame rail Desk drawer is NOT stackable AFD VLC188421 FE MI FFO PFI ID MI VDA FE FFD15 FFD18 FBE ID RD FBE 1 standard drawer box 1 deep drawer box for le that ts both legal and letter size documents AFD FFO 5 full depth adjustable shelves, all with locking clips 21” PFI FFO RD ID VDA MI PFI RD VDA Wall Furniture Drawer 1 drawer box Furniture Book Shelf Wall Cabinet Furniture Book Shelf Tall Cabinet 12” 12” 6” 12” 15”, 18” 21”, 24” 48” Framed construction allows for stacking Full extension side-mounted drawer glides Stackable Drawer front 5½” high 84” 18”, 24”, 30”, 36” AFD FBE FE FWD1506 FWD1806 FWD2106 FWD2406 FFO ID MI Inset Style Note: Inset door styles have slab drawer fronts 3 shelves - adjustable to 3 positions each Top rail uses shaker valance design Cabinet has no bottom (open to ‘counter’) Matching interior included AFD FBE FBS184812 FBS244812 FBS304812 FBS364812 18”, 24”, 30”, 36” 6 shelves - adjustable to 3 positions each Top rail uses shaker valance design Cabinet has standard toekick ‘notch’ Matching interior included PFI FE RD FFO AFD VDA ID FBE MI FE PFI FFO RD ID VDA MI FBS188412 FBS248412 FBS308412 FBS368412 PFI RD VDA Mar 2016 f5 Design Note Using wall cabinets and the Reduced Depth (RD) option you can create Boutique cabinets and vanity cabinets with Prepped for Insert (PFI) doors. The W2130 works well and is the largest single door cabinet made to provide maximum mirror space. W2130 PFI RD to 5” W1830 RD to 5” VSH60 toe kick with UF6 applied L/R Design Note Need a vanity storage or a boutique cabinet? Order a reduced depth standard wall cabinet with Prepped For Insert. Matching interior is also available. For more details see pg f6. 5” 30” 36” 42” Mar 2016 Vanity Cabinets VSB3D60 f6 Vanity Cabinets Notes Mar 2016 g1 Accessories Moldings, Fillers, Panels, Decorative Accents A B Accessory Nomenclature UF 3 30 product acronym width height Note: All accessories are available in all wood species and nish colors unless noted. For a complete description please reference the Specications & Options section. Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 Accessories Accessory Finish Legend: The bold line in the illustrations represent the nished face/edge/prole of the product. g2 Crown Molding Traditional Crown Crown Molding Angle Crown Crown Molding Cove Crown 2¾” 3 2½” 22” 96” 96” 3 3½” 3” 22” 96” Accessories ¾” Solid wood 96” in length Solid wood 96” in length Solid wood 96” in length TCM8 ACM8 CVM8 Decorative Molding Ogee Pilaster 96” Crown Molding Ceiling Crown Crown Molding Soft Crown 3 2½” 4¾” 1½” 96” 96” 1¼” 3 32¾” Solid wood 96” in length ¾” OGP8 Solid wood 96” in length Solid wood 96” in length SCM8 CCM8 Design Note OGP8 can be used for trim along base cabinets for a furniture look. OGP8 can also be used as valance, light rail or top molding application. OGP8 used as light rail OGP8 used as base shoe Mar 2016 g3 Window Casing Molding Scribe Molding Batten Molding 96” 96” 96” 2¼” ¾” ¾” Solid wood 96” in length WC8 Solid wood 96” in length Solid wood 96” in length ¼” SM8 ¼” BM8 Design Note WC8 can be used as a lightrail when applied vertically to cabinet frame. Design Note Accessories SM8 recommended for use along the wall for wall, base, and especially pantry cabinets to hide gapping created between cabinet back and wall when walls are not plumb, straight or square. WC8 Lightrail Counter Top Molding Outside Corner Molding Inside Quarter (Corner) Molding 96” 96” 96” ¼” 1½” Solid wood 96” in length ¾” ¾” Solid wood 96” in length 1” Solid wood 96” in length ¾” 1” CTM8 IQR8 OCM8 Design Note Design Note Design Note Use CTM8 combined with a nished panel to create custom counter top. Use build up for under counter and ‘skin’ with panel using CTM8 as edge treatment. Use as IQR8 to trim out base toe kick to provide nished look when oors are uneven. Use as OCM8 for a light rail application. wall wall cabinet Finished Panel IQR8 CTM8 OCM8 floor Mar 2016 OGP8 g4 Fillers Universal Fillers Angled Fillers Fluted A 45° adjacent cabinet 3” adjacent cabinet 3” B A 1½” A Accessories ¾” Solid wood Finished 3 sides (front & sides) UF1.5 llers have ½” dado on back side A 1½” 1½” 3” 3” 3” 3” 3” 3” 6” 6” 6” 6” UF1.542 UF1.596 UF330 UF336 UF342 UF384 UF390 UF396 UF642 UF684 UF690 UF696 B 42” 96” 30” 36” 42” 84” 90” 96” 42” 84” 90” 96” Fillers Angled Fluted 45° adjacent cabinet ¾” Solid wood Finished 3 sides (front & sides) ¾” Solid wood Finished 3 sides (front & sides) AF330 AF336 AF342 A 30” 36” 42” 96” FF330 FF336 FF342 FF396 A 30” 36” 42” Design Note Create a focal point by bumping (pulling) out the Sink Base 3” using the Angle Fillers, AF or AFF. Be sure to match up angle on toekick and counter top. Fillers Overlay 5½” adjacent cabinet 3” A UF6 A AFF30 fluted filler Sink Base pulled 3” ¾” Solid wood Finished 3 sides (front & sides) AFF330 AFF336 AFF342 A 30” 36” 42” ¾” Solid wood For use with Full Overlay door styles only Must be mounted to UF6 (not included) Matching edge style proles Back side not nished OVF630 OVF636 OVF642 A 29” 35” 41” Mar 2016 g5 Capital & Plinth Blocks Decorative Accent ¾” A Design Note Turn a ller into a focal point by using a a uted ller and plinth blocks as ‘overlay’ llers. The base cabinet application illustration below uses the FF30 and the PB3X45 applied on top of a ller that has been installed ush with the face frame. This keeps the application ush with the doors and drawer fronts. PB3X45 is also used at the bottom of the door and face frame. Base Toe Kick Panel 4½” 96” 3” CB3X3 PB3X4.5 3/16” nominal panel veneered engineered core Finished 1 side Toe Kick (TKCAP) available see pg g10 PB3X45 plinth block Solid wood A 3” 4½” BTK8 FF30 filler Base End Panel Finished End Skin A 23¼” 34½” B 3/16” nominal panel veneered engineered core Finished 1 side WEP1230 WEP1236 WEP1242 WEP1542 Mar 2016 Base End Panel Finished End Skin A B 11¼” 11¼” 11¼” 14¼” 30” 36” 42” 42” 3/16” nominal panel veneered engineered core Finished 1 side Notched for toekick Must order for left or right side BEPR BEPL 23¼” 34½” 3/16” nominal panel veneered engineered core Finished 1 side NOT notched for toekick BEFP Accessories Wall End Panel Finished End Skin g6 Tall End Panel Finished End Skin Tall End Panel Finished End Skin 23¼” Finished Panel Skin 23¼” 48” 96” 96” grain 3/16” nominal panel veneered engineered core Finished 1 side Notched for toekick Must order for left or right side Accessories TEPL TEPR 96” 3/16” nominal panel veneered engineered core Finished 1 side NOT notched for toekick 3/16” nominal panel veneered engineered core Finished 1 side FP4896 TEFP Finished Panel Skin 96” 48” grain Bead Panel Note When cutting down ¼” bead panel it is important that the panel be cut in a specic manner that will allow the beads to match up for base and wall cabinets above them. Panel is ‘beaded’ in a specic manner with a bead on one side (right) and an angle on the other (left). This is done so 2 panels can be installed side be side and look like a continuous panel. Always cut panels down from the angle (left) side rst working to the right. LEFT (has angle end) ¼” 3/16” nominal panel veneered engineered core Finished 1 side FP9648 grain grain Wall End Beaded Panel Finished End Skin A 3” B RIGHT (has bead end) top view 3” ¼” ¼” nominal panel veneered engineered core Bead and nished 1 side BWEP1230 BWEP1236 BWEP1242 A 11¼” 11¼” 11¼” B 30” 36” 42” BWEP1542 14¼” 42” cut panel left to right Mar 2016 g7 Base End Beaded Panel Finished End Skin Base End Beaded Panel Finished End Skin 23¼” Finished Beaded Panel Skin 48” 23¼” 3” 34½” 3” 34½” grain 48” 3” ¼” ¼” ¼” ¼” nominal panel veneered engineered core Bead and nished 1 side Notched for toekick Must order for left or right side ¼” nominal panel veneered engineered core Bead and nished 1 side NOT notched for toekick BBEFP Tall End Beaded Panel Finished End Skin Tall End Beaded Panel Finished End Skin A BFP4848 Accessories BBEPR BBEPL ¼” nominal panel veneered engineered core Bead and nished 1 side Dishwasher Return ½” Finished End Panel A 24” 3” 3” 34½” grain 24” 96” 96” grain grain 3” 3” No toe kick notch Invert for left/right installation Solid wood front (ller) trimmable to 1” wide Side return panel is ½” veneer plywood Side return exterior matching nish Side return interior is unnished ¼” ¼” ¼” nominal panel veneered engineered core Bead and nished 1 side Notched for toekick BTEP1284L BTEP1284R BTEP2484L BTEP2484R BTEP1290L BTEP1290R BTEP2490L BTEP2490R Mar 2016 A 11¼” 11¼” 23¼” 23¼” 11¼” 11¼” 23¼” 23¼” BTEP1296L BTEP1296R BTEP2496L BTEP2496R A 11¼” 11¼” 23¼” 23¼” ¼” nominal panel veneered engineered core Bead and nished 1 side NOT notched for toekick BTEFP1296 BTEFP2496 A 11¼” 23¼” DWR3 Design Note For DWR3 and RR96 apply Base End Panel or Beaded Base End Panel for furniture end return. applied panel e sid filler g8 Refrigerator Return ½” Finished End Panel Floor ½” Plywood Panel Finished Shelf ¾” Engineered Wood Panel 24” ¾” ½” grain 12¾” grain 96” grain 36” ¾” nominal panel veneered engineered core with matching stain Standard painted colors receive matching melamine exterior application All edges nished 48” ½” veneer plywood color match one side Melamine interior nish one side All edges unnished/raw 24” 1½” FS7212 FL4836 Design Note 1½” Accessories 72” Use combined with UF1.542, WEP, FS7212 and valance to create book case up to 42” W X 42” H. Field assembly required. ½” plywood return panel 1½” x ¾” solid hardwood front ller trimmable to 1” wide Exterior is unnished (no color) plywood Interior is melamine matching interior Identify nished ends Left/Right for factory applied nished end (side) No toe kick notch Invert for left/right installation VC30 FS7212 (shelves) WEP1242 (if exposed) FL4836 (cabinet sides, top, bottom) UF1.542 RR96 FBE (Frame) FE Deep Tall End Panel ¾” Engineered Wood Panel 30” raw end 96” Create a custom ‘built in refrigerator’ look with the DTEP3096 panel. Trim the DTEP panel to the refrigerator box depth to ensure that doors properly operate. Install the Wall Refrigerator (WR) above refrigerator and pull WR cabinet forward to depth of DTEP panel. Use a ller to ll in the gap between the WR cabinet and the refrigerator. Note: in illustration below the pantry cabinet has also been pulled to DTEP panel depth. filler used to fill gap between refrigerator & wall cabinet grain finished end Design Note wall refrigerator (24” depth) cabinet pulled finished end 12” d wall raw end ¾” Utility (24” depth) cabinet pulled to 30” ¾” nominal panel veneered engineered core with matching stain White & Linen painted colors receive matching melamine exterior application all other colors will be stained or painted veneer. Edge banded on both long sides Top & bottom edges are raw/unnished 24” d base DTEP3096 DTEP3096 trimmed to fit refrigerator depth Mar 2016 g9 Wood Base End ¾” Engineered Wood Panel Mission Corbel Decorative Accent Counter Top Support Decorative Accent 2¾” 9” 24” 5” raw end 34½” finished end finished end 10” 10” raw end ¾” ¾” nominal panel veneered engineered core with matching stain Standard painted colors receive matching melamine exterior application Edge banded on both long sides Top & bottom edges are raw/unnished WBEP 3” Solid wood No mounting parts provided CTS MC10 Post Square Post Split Square Post Turned Post Split Turned 3” Accessories Tapered Leg Decorative Accent Solid wood No mounting parts provided 3” 3” 3” 3” 7¼” 7¼” 7¼” 7¼” 6” 35¼” 35¼” 35¼” 35¼” Solid wood TPL 7¼” 7¼” 7¼” 7¼” Design Note Use Tapered Leg or corbels for wall mounts & for shelving with FS7212 or UF6 to create open shelf. PS336 PSS336 Solid wood Field trimmable Split Post must me mounted to universal ller - order separately Mar 2016 1½” 3” 1½” 3” PT336 PST336 Solid wood Field trimmable Split Post must me mounted to universal ller - order separately g 10 Decorative Doors Decorative Accent Shaker Valance Decorative Accent Toe Kick Cap Trim Accent Field install only Decorative door extends over frame edge WEP/BEP/TEP required for installation, order cabinet(s) nished left/right/both Utility & Wall Refrigerator 24” deep cabinets require 4 doors DDR1230 - for wall or upper pantry 30” H & Base End Angle (BEA) DDR1236 - for wall or upper pantry 36” H DDR1242 - for wall or upper pantry 42” H 4½” 1” ¾” Solid wood 4 sides nished, end cut raw ¼” DDR1250 - for lower utility DDR2430 - for base cabinet DDR1212 - for wall 12” H DDR1215 - for wall 15” H DDR1218 - for wall 18” H DDR1221 - for wall 21” H DDR1224 - for wall 21” H A 4” A Maximum Trim (each end) ¼” Solid wood Trim piece used to apply over raw cut edge of BTK8 TKCAP VSH30 VSH36 VSH42 VSH48 VSH60 2” 2” 2” 2” 2” Accessories Crown Valance Decorative Accent 4½” WEP ¾” 1¾” 2¾” 4” ¾” A Design Note Use a valance for a decorative base application for a sink base or focal cabinet. If pulling or ‘bumping’ out cabinet remember to use UF6 ller, trimed to height in eld to nish the side reveals of toekick area. BEP Solid wood 4 sides nished, end cut raw A Maximum Trim (each end) VC30 VC36 VC42 VC48 VC60 1” 1” 1” 1” 1” Design Note Fillers and OGP8 (inverted) can be used for additional decorative valance options. 3” or 6” UF VC36 UF6 96” ¾” ¾” OGP8 96” 4¾” TEP Mar 2016 g 11 Drawer Insert Utensil Tray Kit Drawer Insert Knife Block Kit Dividers ½” solid hardwood, 2¼” high ¼” Plywood base with melamine top Natural nish Field installation accessory only Not sized to t reduced depth cabinets Dividers ½” solid hardwood, 2¼” high ¼” Plywood base with melamine top Natural nish Field installation accessory only Not sized to t reduced depth cabinets Dividers ½” solid hardwood, 2¼” high ¼” Plywood base with melamine top Natural nish Field installation accessory only Not sized to t reduced depth cabinets CTK15 UTK15 KBK15 Fits 15” wide base cabinet Fits 15” wide base cabinet Fits 15” wide base cabinet 10 knife slots CTK18 UTK18 KBK18 Fits 18” wide base cabinet Fits 18” wide base cabinet Fits 18” wide base cabinet 13 knife slots CTK21A UTK21A KBK21 Fits 21” wide base cabinet Fits 21” wide base cabinet Fits 21” wide base cabinet 17 knife slots CTK24 UTK24 KBK24 Fits 24” wide base cabinet Fits 24” wide base cabinet Fits 24” wide base cabinet 20 knife slots Mar 2016 Accessories Drawer Insert Cutlery Tray Kit g 12 Accessories Notes Mar 2016 h1 Decorative Hardware Decorative Hardware Mar 2016 h2 Manitou Collection Thorton Collection 1¼” Diameter Knob 5½” Beaded Pull Varied Diameter Knobs Varied Length Pulls Satin Nickel Satin Nickel DH193 DH194 9/16” Diameter DH232 1.89” DH231 .984” Antique English 9/16” Diameter 7/16” Diameter DH233 5.74” DH239 5.35” DH234 7” DH235 10.78” DH240 6.14” DH241 8.11” Oil Rubbed Bronze DH195 DH196 9/16” Diameter DH236 1.89” Antique Silver 9/16” Diameter DH237 5.75” DH238 7” Decorative Hardware St. Charles Collection DH197 DH198 1 1/4” Diameter Knob 5 1/8” Bow Pull Satin Nickel Dark Antique Copper DH119 DH199 DH120 DH200 Brushed Nickel Lacquer Dark Brushed Antique Copper DH201 DH121 DH202 Dark Brushed Antique Copper Oil Rubbed Bronze DH203 DH122 DH204 DH123 DH124 No Collection 4 5/16” Wire Pull Aluminum DH227 Satin Nickel Brushed Chrome DH228 DH229 Mar 2016 h3 Tamarack Collection Belmont Collection 1 3/16” Diameter Knob 4 1/2” Bow Pull 1 3/16” Diameter Knob 3 3/8” Turned Pull Satin Nickel Satin Nickel DH107 DH108 DH169 Polished Chrome Dark Antique Copper DH109 DH110 DH171 DH173 DH174 Black Nickel Onamia Collection 1” diameter knobs 4 1/4” bow pulls Satin Nickel DH175 DH176 Matte Black DH113 DH114 Dark Antique Copper DH177 DH178 Satin Brass DH115 DH116 Dark Brushed Antique Copper DH179 DH180 Oil Rubbed Bronze DH117 DH118 DH181 Mar 2016 DH182 Decorative Hardware DH112 DH172 Brushed Chrome Dark Brushed Antique Copper DH111 DH170 h4 Sibley Collection Vermillion Collection 1 3/16” diameter knob 6” teardrop pulls 1 3/16” diameter knob 4 1/2” leaf pulls Satin Nickel DH147 DH148 Brushed Nickel Lacquer DH133 Brushed Nickel Lacquer DH149 DH150 Dark Brushed Antique Copper DH135 Decorative Hardware Dark Brushed Antique Copper DH151 DH152 Leighton I Collection 1 1/8” diameter knobs 5 1/4” bow pulls DH102 DH137 DH104 1” Square Knobs 5” Bow Pull Swedish Iron DH214 DH106 DH215 Antique Brass DH216 DH217 Brushed Copper Dark Brushed Antique Copper DH105 DH138 Grindstone Collection Dark Antique Copper DH103 DH136 Gun Metal Satin Nickel DH101 DH134 DH218 DH219 Mar 2016 h5 St. Croix Collection Dellwood Collection 1 1/4” Diameter Knob 3 11/16” Cup Pulls 1 3/16” diameter knob 3 3/8” Rope Pull Satin Nickel Satin Nickel DH162 DH161 DH183 DH184 Brushed Nickel Oil Rubbed Bronze DH163 DH164 DH186 DH185 Dark Brushed Antique Copper Antique Brass DH166 DH165 Antique Dark Brass Dark Antique Copper DH167 DH168 Rhodes Collection DH189 DH190 1 1/4” diameter knob 4 1/2” Rope Pull Satin Nickel Dark Brushed Antique Copper DH153 DH191 DH154 DH192 Brushed Nickel Lacquer Shakopee Collection 1” Diameter Knob 5 5/8” Spoon Pull DH155 Polished Chrome DH223 DH224 Dark Brushed Antique Copper DH157 Mar 2016 DH158 Dark Antique Copper Satin Nickel DH225 DH156 DH226 DH159 DH160 Decorative Hardware DH188 DH187 h6 Portage Collection 1 1/4” Diameter Knob 5 1/2” Wire Bow Pull Calhoun Collection 5” Bow Pull 6” Bow Pull Satin Nickel Satin Nickel DH139 DH126 DH125 DH140 Dark Brushed Antique Copper Dark Brushed Antique Copper DH141 DH127 DH128 DH142 Fond du Lac Collection Mille Lacs Collection 1 1/8” Diameter Knob 5 1/2” Twisted Pull 5” bow pull 6” bow pull Decorative Hardware Black Antique Satin Nickel DH143 DH205 DH206 DH144 Dark Brushed Antique Copper DH207 DH145 Swedish Iron DH146 Excelsior Collection DH208 DH209 1 1/2” Tear Drop Knob Satin Nickel Matte Black DH210 DH220 DH221 Brushed Copper Washburn Collection 1 1/8” Oval Knob DH211 DH213 DH212 Satin Nickel DH222 Mar 2016 i1 Parts Drawer Box Parts, Hinges, Shelves, Organizers, Touch Up Kits Note: All parts are neutral in color unless noted. Parts Material dimensions may be nominal based on lumber industry standards. Product specications and material are subject to change without notice. Mar 2016 i2 Drawer Glide Full Access Undermount Blum® Tandem plus Blumotion Full access set (left & right) Steel under mount concealed construction Includes mounting brackets Integrated buffer close/anti-slam system Designed to support up to 90 lbs.per drawer Same glide used for Roll-Out Trays (ROT) Hinge Standard Full Overlay Soft Close Blum Compact with Blumotion® Soft-close Door built in 6 way adjustable hinge Nickel plated hardened steel Hinge opens to 107° ±1/8” height adjustment ±1/16” cam side adjustment +3/32 “ - 1/32 “ cam depth adjustment 1¼” reveal full overlay hinge Hinge Easy Reach 3 dimensional adjustment, 170° angle opening, all metal nickel plated Hinge connects bi-fold doors to frame Blum® LZ-HINGE HINGE-FOL-SCD GLIDE-STD24 GLIDE-STD21 GLIDE-STD18 GLIDE-STD15 GLIDE-STD12 Hinge Inset Revealed Barrel Hinge Parts Hinge CH Concealed Inset Concealed Blum® Blumotion Soft Close - anti-slam For inset door only On/off switch 6 way adjustable hinge Nickel plated hardened steel Hinge opens to 110° 4 CAM adjustments up to 2-3mm ” 4 way adjustable inset hinge Barrel style reveal hinge Inset hinges require additional adjustment with heavy use doors and after seasonal climate changes HINGE-INS-CH HINGE-INSET-W Hinge Easy Reach 4 dimensional 60° adjustment, angle opening, all metal nickel plated Hinge connects bi-fold together Blum® BIFOLD-HINGE HINGE-INSET Rustic Bronze Brushed Nickel Mar 2016 i3 Super Susan Spin Unit Shelves Roll-Out Tray (ROT) Drawer Box Shelf Rest Support 21” 32” Hardened steel, 5mm peg Provides low prole, yet stable, shelf rest for wall cabinets Rest has back plate to prevent “egging” from occurring in cabinet side peg hole Pack of 12 ROT A frame placement SHELF-REST ROT B hinge placement Bumper Door & Drawer ½” Quietex™ clear soft urethane Sound dampening bumper designed to specically reduce noise Pack of 4 Q-BUMPER ROT12-A ROT15-A ROT18-A ROT21-A ROT24-A ROT27-A ROT30-A ROT33-A ROT36-A ROT12-B ROT15-B ROT18-B ROT21-B ROT24-B ROT27-B ROT30-B ROT33-B ROT36-B Fixed hardwood spin unit mounted on ¾” non adjustable shelf Natural nish wood spin units feature 1” lip Kidney shape tray Swivel bearing w/stop attached to shelf No center pole Shelf not included Swivel bearing included LZ32K LZ28K Blind Super Susan Shelving Unit ROT12-C ROT15-C ROT18-C ROT21-C ROT24-C ROT27-C ROT30-C ROT33-C ROT36-C Fixed 35” hard wood spin unit pole mounted Natural nish wood half moon 1” lip Only available for BLB42/45 cabinet LZ35H Clear poly carbonate, 5mm peg For all cabinets with 24” depth Designed to hold full cabinet depth shelf in place to prevent from tilting Pack of 4 SHELF-CLIP Mar 2016 Spacer Block Roll-out Tray (ROT) require spacer blocks inserted between the ROT and each cabinet side to allow full clearance of ROT past door hinges. Inset ROT ‘C’ will be narrower than because of how the door sits ‘inside’ the cabinet frame. Parts Shelf Clip Support ” solid hardwood, dovetail joinery ¼” fully captured plywood bottom ROT-A: FOL application ROT does not interfere with hinge, width is wider and mounts to frame ROT-B: Standard for Inset style and used for FOL when ROT interferes with the hinge (primarily bottom ROT application) is narower than ROT-A ROT-C: Standard for Inset CH and is narower than ROT-B for CH (concealed hinge) application and only mount with side block application. (illustration below). Includes ROT, glides, back panel clips, blocks (ROT-A does not need blocks),and screws Field installation required 28” i4 Base Storage Pull Out Organizer Solid hardwood frame Heavy duty, side mounted, full extension, steel, ball bearing glides 3 adjustable shelves Chrome rails Requires full-height door cabinet (not included with part number) Waste Basket Single Unit Waste Basket Double Unit One 35 qt. white container One trash bag bin Heavy duty, side mounted, full extension, steel ball bearing glides Hardwood frame/container holder Two 35 qt. white container Heavy duty, side mounted, full extension, steel ball bearing glides Hardwood frame/container holder WBT15 WBT18 Shelves Touch Up Kit SPO9 SPO12 Parts Tilt Out (TO) Tray For Sink Base 3" (43 mm) Stainless steel Slim design to accommodate minimum clearance for large sink applications TO21 (Recommend qty. 2 for SB42) TO24 TO27 TO30 TO33 TO36 ¾” thick plywood Edge banded front edge Durable and easy to clean melamine on top and bottom Matching edge style proles 12” deep receive shelf rests 24” deep receive shelf clips Only standard sizes listed below 12” Deep SH-912 SH-1212 SH-1512 SH-1812 SH-2112 SH-2412 SH-2712 SH-3012 SH-3312 SH-3612 SH-4212 24” Deep SH-924 SH-1224 SH-1524 SH-1824 SH-2124 SH-2424 SH-2724 SH-3024 SH-3324 SH-3624 SH-4224 Corner Wall SH-CW24 SH-CW27 Wall End Angle SH-WEA Base Easy Reach SH-BER33 SH-BER36 Base End Angle SH-BEA Putty Stick, Stain Marker, 4 bumpers Included with Sink Base Cabinet purchase Putty Stick and Stain Marker are provided by Mohawk Finishing Products™ and are only a representation of the nish Glaze not available TUK M SP (Maple Spice) TUK M SP CH GLZ (Maple Spice/Glz) TUK M VAN (Painted Vanilla) TUK M VAN LAT GLZ (Painted Vanilla/Glz) TUK M WHITE (Painted White) TUK CH KF (Cherry Kafe) TUK CH CD (Cherry Cognac) TUK QSO TOF (Oak Toffee) TUK B ESP (Birch Espresso) TUK P CH (Painted Charcoal) TUK P SG (Painted Sage) TUK P MR (Painted Merlot) TUK P SH (Painted Shale) TUK P GA (Painted Gray Ash) TUK P KG (Painted Keystone) Mar 2016 j1 Price List Note: Pricing discrepancies, errors and omissions may occur between this guide, design software and online pricing program. Please consult with Customer Service with any questions for final determination of price. 6 Square Cabinets® reserves the right to change pricing without notification. Pricing Mar 2016 For Finished End or Beaded End pricing please refer to page b7 j2 1 Pricing Wall Cabinets W3012 331 371 414 331 371 414 364 404 455 364 404 W3312 384 431 480 384 431 480 422 469 528 422 469 W3612 405 454 506 405 454 506 446 494 558 446 494 W3015 394 442 493 394 442 493 433 481 541 433 481 W3315 415 466 519 415 466 519 457 506 571 457 506 W3615 436 489 545 436 489 545 480 532 600 480 532 W1518 375 438 469 375 438 469 434 475 543 434 475 W1818 393 458 491 393 458 491 454 497 568 454 497 W2118 423 492 529 423 492 529 488 532 610 488 532 W2418 471 547 589 471 547 589 543 591 679 543 591 W2718 493 572 616 493 572 616 568 615 710 568 615 W3018 425 477 531 425 477 531 468 519 585 468 519 W3318 443 497 554 443 497 554 487 539 609 487 539 W3618 466 523 583 466 523 583 513 568 641 513 568 W3021 469 526 586 469 526 586 516 572 645 516 572 W3321 490 550 613 490 550 613 539 597 674 539 597 W3621 515 578 644 515 578 644 567 628 709 567 628 W3024 507 569 634 507 569 634 558 618 698 558 618 W3324 523 587 654 523 587 654 575 638 719 575 638 W3624 554 622 693 554 622 693 609 676 761 609 676 WR301224 420 471 525 420 471 525 462 512 578 462 512 WR331224 463 519 579 463 519 579 509 565 636 509 565 WR361224 484 543 605 484 543 605 532 591 665 532 591 WR301524 449 504 561 449 504 561 494 548 618 494 548 WR331524 474 532 593 474 532 593 521 578 651 521 578 WR361524 498 559 623 498 559 623 548 607 685 548 607 WR301824 485 544 606 485 544 606 534 591 668 534 591 WR331824 505 567 631 505 567 631 556 616 695 556 616 WR361824 531 596 664 531 596 664 584 647 730 584 647 WR302124 534 599 668 534 599 668 587 651 734 587 651 WR332124 559 627 699 559 627 699 615 681 769 615 681 WR362124 587 659 734 587 659 734 646 716 808 646 716 WR302424 578 649 723 578 649 723 636 705 795 636 705 WR332424 606 680 758 606 680 758 667 738 834 667 738 WR362424 631 708 789 631 708 789 694 769 868 694 769 W930 265 297 331 265 297 331 292 324 365 292 324 W1230 290 325 363 290 325 363 319 353 399 319 353 W1530 319 358 399 319 358 399 351 389 439 351 389 W1830 348 390 435 348 390 435 383 424 479 383 424 W2130 370 415 463 370 415 463 407 451 509 407 451 W2430 460 516 575 460 516 575 506 561 633 506 561 W2730 524 588 655 524 588 655 576 639 720 576 639 W3030 561 629 701 561 629 701 617 684 771 617 684 W3330 583 654 729 583 654 729 641 711 801 641 711 W3630 612 687 765 612 687 765 673 747 841 673 747 W4230 668 751 835 668 751 835 736 821 920 736 821 W936 341 383 426 341 383 426 375 416 469 375 416 W1236 379 425 474 379 425 474 417 462 521 417 462 W1536 428 480 535 428 480 535 471 522 589 471 522 W1836 465 522 581 465 522 581 512 567 640 512 567 W2136 504 565 630 504 565 630 554 615 693 554 615 W2436 615 690 769 615 690 769 677 751 846 677 751 W2736 739 829 924 739 829 924 813 901 1016 813 901 W3036 787 883 984 787 883 984 866 960 1083 866 960 W3336 829 930 1036 829 930 1036 912 1011 1140 912 1011 W3636 870 976 1088 870 976 1088 957 1061 1196 957 1061 For Finished End or Beaded End pricing please refer to page b7 Mar 2016 j3 Wall Cabinets 377 411 471 441 460 551 581 600 726 W3012 528 437 477 546 512 533 640 652 673 815 W3312 558 461 503 576 540 562 675 680 702 850 W3612 541 448 490 560 525 547 656 665 687 831 W3015 571 472 516 590 553 576 691 693 716 866 W3315 600 496 542 620 581 606 726 721 746 901 W3615 543 445 484 556 519 542 649 589 612 736 W1518 568 464 506 580 542 565 678 612 635 765 W1818 610 498 542 623 581 605 726 651 675 814 W2118 679 554 601 692 645 671 806 785 811 981 W2418 710 578 626 723 673 699 841 813 839 1016 W2718 585 483 528 604 567 590 709 707 730 884 W3018 609 504 550 630 591 615 739 731 755 914 W3318 641 530 579 663 621 647 776 761 787 951 W3618 645 533 582 666 625 652 781 765 792 956 W3021 674 557 608 697 653 681 816 793 821 991 W3321 709 586 640 732 687 715 859 827 855 1034 W3621 698 576 630 720 676 704 845 816 844 1020 W3024 719 595 650 744 697 726 871 837 866 1046 W3324 761 630 689 787 739 769 924 879 909 1099 W3624 578 478 522 597 560 584 700 700 724 875 WR301224 636 526 575 658 617 643 771 757 783 946 WR331224 665 551 601 689 645 672 806 785 812 981 WR361224 618 510 558 638 599 624 749 739 764 924 WR301524 651 540 589 674 632 658 790 772 798 965 WR331524 685 567 618 709 664 692 830 804 832 1005 WR361524 668 552 602 690 647 674 809 787 814 984 WR301824 695 574 627 718 673 701 841 813 841 1016 WR331824 730 604 660 756 708 738 885 848 878 1060 WR361824 734 607 663 759 712 742 890 852 882 1065 WR302124 769 635 694 794 745 777 931 885 917 1106 WR332124 808 667 729 834 783 816 979 923 956 1154 WR362124 795 657 718 821 771 803 964 911 943 1139 WR302424 834 689 752 861 808 842 1010 948 982 1185 WR332424 868 718 784 898 841 877 1051 981 1017 1226 WR362424 365 302 329 377 353 368 441 423 438 529 W930 399 330 360 412 387 403 484 457 473 571 W1230 439 363 396 454 425 443 531 495 513 619 W1530 479 396 432 495 464 484 580 534 554 668 W1830 509 421 460 526 493 514 616 563 584 704 W2130 633 524 572 654 613 639 766 753 779 941 W2430 720 596 651 745 699 728 874 839 868 1049 W2730 771 638 697 798 748 780 935 888 920 1110 W3030 801 663 725 828 777 810 971 917 950 1146 W3330 841 697 761 871 816 850 1020 956 990 1195 W3630 920 762 836 953 893 935 1116 1033 1075 1291 W4230 469 388 424 485 455 474 569 525 544 656 W936 521 431 471 539 505 527 631 575 597 719 W1236 589 487 532 609 571 595 714 641 665 801 W1536 640 529 578 662 620 646 775 690 716 863 W1836 693 573 626 717 672 700 840 742 770 928 W2136 846 699 764 874 820 854 1025 960 994 1200 W2436 1016 840 918 1050 985 1027 1231 1125 1167 1406 W2736 1083 895 977 1119 1049 1094 1311 1189 1234 1486 W3036 1140 943 1030 1179 1105 1152 1381 1245 1292 1556 W3336 1196 990 1081 1237 1160 1209 1450 1300 1349 1625 W3636 For Finished End or Beaded End pricing please refer to page b7 Pricing Mar 2016 455 j4 1 W4236 961 1081 1201 961 1081 1201 1059 1172 1324 1059 1172 W942 361 405 451 361 405 451 397 440 496 397 440 W1242 399 448 499 399 448 499 439 486 549 439 486 W1542 445 499 556 445 499 556 490 542 613 490 542 W1842 481 540 601 481 540 601 529 587 661 529 587 W2142 526 590 658 526 590 658 579 642 724 579 642 W2442 636 714 795 636 714 795 700 776 875 700 776 W2742 758 850 948 758 850 948 834 924 1043 834 924 W3042 803 901 1004 803 901 1004 883 979 1104 883 979 W3342 850 954 1063 850 954 1063 935 1036 1169 935 1036 W3642 892 1001 1115 892 1001 1115 981 1087 1226 981 1087 W4242 991 1113 1239 991 1113 1239 1092 1209 1365 1092 1209 W1530-MFD 719 807 899 719 807 899 791 876 989 791 876 W1830-MFD 770 864 963 770 864 963 847 939 1059 847 939 W3030-MFD 1105 1240 1381 1105 1240 1381 1216 1348 1520 1216 1348 W1536-MFD 910 1021 1138 910 1021 1138 1001 1109 1251 1001 1109 W1836-MFD 975 1094 1219 975 1094 1219 1073 1189 1341 1073 1189 W3036-MFD 1485 1666 1856 1485 1666 1856 1634 1811 2043 1634 1811 W1542-MFD 942 1057 1178 942 1057 1178 1036 1149 1295 1036 1149 W1842-MFD 1004 1126 1255 1004 1126 1255 1104 1225 1380 1104 1225 W3042-MFD 1513 1698 1891 1513 1698 1891 1664 1845 2080 1664 1845 WBC27/3030-L 498 560 623 498 560 623 549 611 686 549 611 WBC27/3030-R 498 560 623 498 560 623 549 611 686 549 611 WBC27/3036-L 645 725 806 645 725 806 711 792 889 711 792 WBC27/3036-R 645 725 806 645 725 806 711 792 889 711 792 WBC27/3042-L 665 747 831 665 747 831 733 817 916 733 817 WBC27/3042-R 665 747 831 665 747 831 733 817 916 733 817 WBC36/3930-L 534 600 668 534 600 668 588 656 735 588 656 WBC36/3930-R 534 600 668 534 600 668 588 656 735 588 656 WBC36/3936-L 710 798 888 710 798 888 782 872 978 782 872 WBC36/3936-R 710 798 888 710 798 888 782 872 978 782 872 WBC36/3942-L 732 822 915 732 822 915 806 899 1008 806 899 WBC36/3942-R 732 822 915 732 822 915 806 899 1008 806 899 WBCP2430-L 631 708 789 631 708 789 694 769 868 694 769 WBCP2430-R 631 708 789 631 708 789 694 769 868 694 769 WAC2430 558 626 698 558 626 698 614 681 768 614 681 WAC2436 700 785 875 700 785 875 770 854 963 770 854 WAC2442 706 792 883 706 792 883 777 860 971 777 860 WAC2730 690 774 863 690 774 863 759 841 949 759 841 WAC2736 889 997 1111 889 997 1111 978 1084 1223 978 1084 WAC2742 898 1008 1123 898 1008 1123 988 1095 1235 988 1095 WAC2430-MFD 1049 1177 1311 1049 1177 1311 1154 1280 1443 1154 1280 WAC2436-MFD 1316 1477 1645 1316 1477 1645 1448 1604 1810 1448 1604 WAC2442-MFD 1327 1489 1659 1327 1489 1659 1460 1618 1825 1460 1618 WAC2730-MFD 1297 1455 1621 1297 1455 1621 1427 1582 1784 1427 1582 WAC2736-MFD 1671 1875 2089 1671 1875 2089 1838 2038 2298 1838 2038 WAC2742-MFD 1688 1894 2110 1688 1894 2110 1857 2059 2321 1857 2059 WER2430 796 853 995 796 853 995 836 904 1045 836 904 WER2436 887 950 1109 887 950 1109 931 1007 1164 931 1007 WER2442 1046 1121 1308 1046 1121 1308 1099 1188 1374 1099 1188 WEA1230 455 511 569 455 511 569 501 555 626 501 555 WEA1236 504 565 630 504 565 630 554 615 693 554 615 WEA1242 577 647 721 577 647 721 635 703 794 635 703 WES930 304 310 380 304 310 380 304 310 304 304 310 Pricing Wall MFD Wall Corner Wall Specialty For Finished End or Beaded End pricing please refer to page b7 Mar 2016 j5 1324 1093 1193 1367 1278 1335 1598 1418 1475 1773 496 411 448 513 481 502 601 586 607 733 W4236 W942 549 454 496 568 532 555 665 637 660 796 W1242 613 506 553 632 593 618 741 698 723 873 W1542 661 547 598 684 641 669 801 746 774 933 W1842 724 598 653 747 701 731 876 806 836 1008 W2142 875 724 790 905 848 884 1060 1058 1094 1323 W2442 1043 862 941 1077 1011 1053 1264 1221 1263 1526 W2742 1104 914 997 1142 1071 1115 1339 1281 1325 1601 W3042 1169 967 1056 1209 1133 1181 1416 1343 1391 1679 W3342 1226 1014 1108 1268 1189 1239 1486 1399 1449 1749 W3642 1365 1127 1231 1409 1319 1377 1649 1529 1587 1911 W4242 Wall MFD 818 893 1022 959 999 1199 1029 1069 1286 W1530-MFD 876 957 1095 1027 1070 1284 1097 1140 1371 W1830-MFD 1520 1257 1373 1571 1473 1535 1841 1613 1675 2016 W3030-MFD 1251 1035 1130 1294 1213 1264 1516 1283 1334 1604 W1536-MFD 1341 1109 1211 1387 1300 1355 1625 1370 1425 1713 W1836-MFD 2043 1689 1844 2111 1980 2064 2475 2120 2204 2650 W3036-MFD 1295 1072 1170 1340 1256 1309 1570 1361 1414 1701 W1542-MFD 1380 1142 1247 1428 1339 1395 1674 1444 1500 1805 W1842-MFD 2080 1721 1879 2151 2017 2102 2521 2227 2312 2784 W3042-MFD 686 568 623 710 666 698 833 736 768 920 WBC27/3030-L 686 568 623 710 666 698 833 736 768 920 WBC27/3030-R 889 736 807 920 862 904 1078 932 974 1165 WBC27/3036-L 889 736 807 920 862 904 1078 932 974 1165 WBC27/3036-R 916 759 833 948 889 932 1111 994 1037 1243 WBC27/3042-L 916 759 833 948 889 932 1111 994 1037 1243 WBC27/3042-R 735 609 668 761 714 748 893 854 888 1068 WBC36/3930-L 735 609 668 761 714 748 893 854 888 1068 WBC36/3930-R 978 810 888 1013 949 994 1186 1089 1134 1361 WBC36/3936-L 978 810 888 1013 949 994 1186 1089 1134 1361 WBC36/3936-R 1008 835 916 1043 979 1025 1224 1189 1235 1486 WBC36/3942-L 1008 835 916 1043 979 1025 1224 1189 1235 1486 WBC36/3942-R 868 718 784 898 841 877 1051 1051 1087 1314 WBCP2430-L 868 718 784 898 841 877 1051 1051 1087 1314 WBCP2430-R 768 635 693 793 744 775 930 814 845 1018 WAC2430 963 796 869 995 933 973 1166 1003 1043 1254 WAC2436 971 803 877 1003 941 981 1176 1046 1086 1308 WAC2442 949 785 857 981 920 959 1150 990 1029 1238 WAC2730 1223 1011 1104 1264 1185 1236 1481 1255 1306 1569 WAC2736 1235 1022 1115 1277 1197 1248 1496 1302 1353 1628 WAC2742 1443 1193 1303 1491 1399 1457 1749 1469 1527 1836 WAC2430-MFD 1810 1496 1634 1871 1754 1829 2193 1824 1899 2280 WAC2436-MFD 1825 1510 1649 1887 1770 1844 2213 1875 1949 2344 WAC2442-MFD 1784 1476 1611 1845 1729 1803 2161 1799 1873 2249 WAC2730-MFD 2298 1901 2075 2376 2228 2322 2785 2298 2392 2873 WAC2736-MFD 2321 1920 2097 2401 2251 2345 2814 2356 2450 2945 WAC2742-MFD 1045 859 921 1074 1003 1075 1254 1143 1215 1429 WER2430 1164 957 1026 1196 1117 1197 1396 1257 1337 1571 WER2436 1374 1129 1210 1411 1318 1413 1648 1528 1623 1910 Wall Corner WER2442 Wall Specialty Mar 2016 626 518 565 647 607 632 759 n/a n/a n/a WEA1230 693 573 626 717 672 700 840 n/a n/a n/a WEA1236 794 656 716 820 769 802 961 n/a n/a n/a WEA1242 380 310 310 388 304 310 380 310 310 310 WES930 For Finished End or Beaded End pricing please refer to page b7 Pricing 989 1059 j6 1 WES936 401 409 501 401 409 501 401 409 401 401 WES942 420 428 525 420 428 525 420 428 420 420 409 428 FLS24 360 403 450 360 403 450 360 403 450 360 403 FLS30 414 464 518 414 464 518 414 464 518 414 464 FLS36 476 533 595 476 533 595 476 533 595 476 533 FLS42 547 613 684 547 613 684 547 613 684 547 613 WMSC3018 487 496 609 487 496 609 487 496 609 487 496 FWD1506 366 376 458 366 395 473 366 395 458 405 395 FWD1806 386 395 483 386 424 494 386 424 483 434 424 FWD2106 414 427 518 414 453 533 414 453 518 472 453 FWD2406 434 448 543 434 480 560 434 480 543 499 480 FBS184812 972 980 1215 972 980 1215 972 980 1215 972 980 FBS244812 1013 1020 1266 1013 1020 1266 1013 1020 1266 1013 1020 FBS304812 1054 1060 1318 1054 1060 1318 1054 1060 1318 1054 1060 FBS364812 1095 1100 1369 1095 1100 1369 1095 1100 1369 1095 1100 WOC3018 358 365 448 358 365 448 358 365 448 358 365 WCD3018 557 568 696 557 568 696 557 568 696 557 568 WSC3018 544 555 680 544 555 680 544 555 680 544 555 FSD306-H 843 860 1054 843 860 1054 843 860 1054 843 860 FSD306-V 843 860 1054 843 860 1054 843 860 1054 843 860 FWC630 306 312 383 306 312 383 306 312 383 306 312 RHCL3631SH 2211 2366 2764 2211 2366 2764 2250 2602 2813 2250 2602 RHCL3640SH 2352 2532 2940 2352 2532 2940 2406 2784 3008 2406 2784 RHCL3652SH 2620 2844 3275 2620 2844 3275 2707 3118 3384 2707 3118 B12 403 432 504 453 482 566 423 458 529 473 482 B15 450 482 563 500 532 625 473 511 591 523 538 B18 498 533 623 548 583 685 523 565 654 573 595 B21 563 603 704 613 653 766 591 640 739 641 673 B24 618 662 773 668 712 835 649 701 811 699 738 B27 668 715 835 718 765 898 701 759 876 751 799 B30 718 769 898 768 819 960 754 816 943 804 858 B33 769 824 961 819 874 1024 807 873 1009 857 919 Pricing Base Cabinets B36 820 878 1025 870 928 1088 861 931 1076 911 980 B42 1103 1181 1379 1153 1231 1441 1158 1255 1448 1208 1321 B12-ROT-1 515 552 644 565 602 706 541 585 676 591 616 B15-ROT-1 565 605 706 615 655 769 593 642 741 643 675 B18-ROT-1 616 660 770 666 710 833 647 699 809 697 737 B21-ROT-1 684 733 855 734 783 918 718 777 898 768 817 B24-ROT-1 742 795 928 792 845 990 779 843 974 829 887 B27-ROT-1 795 851 994 845 901 1056 835 903 1044 885 950 B30-ROT-1 848 908 1060 898 958 1123 890 963 1113 940 1014 B33-ROT-1 902 966 1128 952 1016 1190 947 1024 1184 997 1078 B36-ROT-1 956 1024 1195 1006 1074 1258 1004 1086 1255 1054 1143 B42-ROT-1 1375 1473 1719 1438 1536 1798 1444 1561 1805 1507 1642 B12-ROT-2 627 672 784 677 722 846 658 712 823 708 750 B15-ROT-2 680 728 850 730 778 913 714 772 893 764 813 B18-ROT-2 734 786 918 784 836 980 771 833 964 821 877 B21-ROT-2 805 862 1006 855 912 1069 845 914 1056 895 963 B24-ROT-2 866 927 1083 916 977 1145 909 983 1136 959 1035 B27-ROT-2 922 987 1153 972 1037 1215 968 1047 1210 1018 1102 B30-ROT-2 978 1047 1223 1028 1097 1285 1027 1110 1284 1077 1169 B33-ROT-2 1035 1108 1294 1085 1158 1356 1087 1176 1359 1137 1237 B36-ROT-2 1092 1170 1365 1142 1220 1428 1147 1240 1434 1197 1305 B42-ROT-2 1647 1745 2059 1710 1808 2138 1716 1800 2145 1779 1895 Base ROT For Finished End or Beaded End pricing please refer to page b7 Mar 2016 j7 501 409 409 511 401 409 501 409 409 409 WES936 525 428 428 535 420 428 525 428 428 428 WES942 450 360 403 450 360 403 450 360 403 450 FLS24 518 414 464 518 414 464 518 414 464 518 FLS30 595 476 533 595 476 533 595 476 533 595 FLS36 684 547 613 684 547 613 684 547 613 684 FLS42 609 487 496 609 487 496 609 496 496 609 WMSC3018 506 405 395 506 338 395 423 395 395 395 FWD1506 543 434 424 543 357 424 446 424 424 424 FWD1806 590 472 453 590 378 453 473 453 453 453 FWD2106 624 499 480 624 393 480 491 480 480 480 FWD2406 1215 972 980 1215 972 980 1215 980 980 980 FBS184812 1266 1013 1020 1266 1013 1020 1266 1020 1020 1020 FBS244812 1318 1054 1060 1318 1054 1060 1318 1060 1060 1060 FBS304812 1369 1095 1100 1369 1095 1100 1369 1100 1100 1100 FBS364812 448 358 365 448 358 365 448 365 365 365 WOC3018 696 557 568 696 557 568 696 568 568 568 WCD3018 680 544 555 680 544 555 680 555 555 555 WSC3018 1054 843 860 1054 843 860 1054 860 860 860 FSD306-H FSD306-V 1054 843 860 1054 843 860 1054 860 860 860 383 306 312 383 306 312 383 312 312 312 FWC630 2813 2363 2732 2953 2306 3005 2883 2446 3145 3058 RHCL3631SH 3008 2526 2923 3158 2501 3216 3126 2641 3356 3301 RHCL3640SH 3384 2842 3274 3553 2862 3601 3578 3072 3811 3840 RHCL3652SH Base Cabinets 591 435 490 544 508 545 635 578 615 723 B12 654 487 546 609 567 609 709 637 679 796 B15 716 539 605 673 627 673 784 697 743 871 B18 801 608 684 760 709 761 886 779 831 974 B21 874 668 750 835 779 836 974 919 976 1149 B24 722 812 902 842 904 1053 982 1044 1228 B27 776 872 971 905 971 1131 1045 1111 1306 B30 1071 831 934 1039 969 1040 1211 1109 1180 1386 B33 1139 907 996 1134 1033 1109 1291 1173 1249 1466 B36 1510 1222 1342 1528 1392 1491 1740 1532 1631 1915 B42 Base ROT Mar 2016 739 523 626 653 649 697 811 719 767 899 804 573 686 717 712 764 890 782 834 978 B12-ROT-1 B15-ROT-1 871 625 748 781 776 833 970 846 903 1058 B18-ROT-1 960 695 831 868 862 925 1078 932 995 1165 B21-ROT-1 1036 753 902 941 935 1003 1169 1075 1143 1344 B24-ROT-1 1106 807 966 1009 1002 1075 1253 1142 1215 1428 B27-ROT-1 1175 861 1030 1076 1068 1147 1335 1208 1287 1510 B30-ROT-1 1246 916 1095 1144 1137 1220 1421 1277 1360 1596 B33-ROT-1 1318 970 1161 1213 1205 1292 1506 1345 1432 1681 B36-ROT-1 1884 1395 1669 1744 1732 1858 2165 1872 1998 2340 B42-ROT-1 885 636 762 795 790 848 988 860 918 1075 B12-ROT-2 955 690 826 862 857 919 1071 927 989 1159 B15-ROT-2 1026 745 891 932 925 992 1156 995 1062 1244 B18-ROT-2 1119 817 978 1021 1014 1088 1268 1084 1158 1355 B21-ROT-2 1199 879 1052 1099 1091 1171 1364 1231 1311 1539 B24-ROT-2 1273 936 1120 1170 1162 1247 1453 1302 1387 1628 B27-ROT-2 1346 993 1188 1241 1232 1322 1540 1372 1462 1715 B30-ROT-2 1421 1051 1257 1314 1304 1400 1630 1444 1540 1805 B33-ROT-2 1496 1108 1326 1385 1376 1476 1720 1516 1616 1895 B36-ROT-2 2224 1607 1925 2009 2004 2046 2505 2144 2186 2680 B42-ROT-2 For Finished End or Beaded End pricing please refer to page b7 Pricing 939 1005 j8 1 Base Full Height B9-FH 357 382 446 357 382 446 375 405 469 375 405 B12-FH 399 427 499 399 427 499 419 453 524 419 453 B15-FH 415 444 519 415 444 519 435 471 544 435 471 B18-FH 431 461 539 431 461 539 452 488 565 452 488 B21-FH 446 478 558 446 478 558 469 507 586 469 507 B24-FH 499 534 624 499 534 624 524 566 655 524 566 B27-FH 542 580 678 542 580 678 569 615 711 569 615 B30-FH 587 629 734 587 629 734 616 666 770 616 666 B33-FH 807 865 1009 807 865 1009 848 917 1060 848 917 B36-FH 861 922 1076 861 922 1076 904 978 1130 904 978 B42-FH 968 1029 1210 968 1029 1210 1011 1072 1264 1011 1072 B12-FH-ROT-1 517 553 646 517 553 646 542 587 678 542 587 B15-FH-ROT-1 536 574 670 536 574 670 562 608 703 562 608 B18-FH-ROT-1 554 594 693 554 594 693 582 630 728 582 630 B21-FH-ROT-1 573 614 716 573 614 716 602 651 753 602 651 B24-FH-ROT-1 629 674 786 629 674 786 660 714 825 660 714 B27-FH-ROT-1 675 723 844 675 723 844 709 767 886 709 767 B30-FH-ROT-1 723 775 904 723 775 904 760 822 950 760 822 B33-FH-ROT-1 947 1014 1184 947 1014 1184 994 1075 1243 994 1075 B36-FH-ROT-1 1004 1075 1255 1004 1075 1255 1054 1140 1318 1054 1140 B42-FH-ROT-1 1362 1433 1703 1362 1433 1703 1412 1455 1765 1412 1455 B12-FH-ROT-2 634 679 793 634 679 793 666 720 833 666 720 B15-FH-ROT-2 656 703 820 656 703 820 689 745 861 689 745 B18-FH-ROT-2 678 726 848 678 726 848 712 770 890 712 770 B21-FH-ROT-2 700 750 875 700 750 875 735 795 919 735 795 B24-FH-ROT-2 759 813 949 759 813 949 797 862 996 797 862 B27-FH-ROT-2 809 866 1011 809 866 1011 849 918 1061 849 918 B30-FH-ROT-2 860 921 1075 860 921 1075 903 977 1129 903 977 B33-FH-ROT-2 1087 1164 1359 1087 1164 1359 1141 1234 1426 1141 1234 B36-FH-ROT-2 1147 1228 1434 1147 1228 1434 1204 1302 1505 1204 1302 B42-FH-ROT-2 1798 1890 2248 1798 1890 2248 1863 1918 2329 1863 1918 B12-FH-ROT-3 752 806 940 752 806 940 790 857 988 790 857 B15-FH-ROT-3 777 833 971 777 833 971 816 885 1020 816 885 B18-FH-ROT-3 802 860 1003 802 860 1003 843 914 1054 843 914 B21-FH-ROT-3 827 887 1034 827 887 1034 869 943 1086 869 943 B24-FH-ROT-3 889 953 1111 889 953 1111 934 1014 1168 934 1014 B27-FH-ROT-3 942 1009 1178 942 1009 1178 990 1073 1238 990 1073 B30-FH-ROT-3 996 1068 1245 996 1068 1245 1047 1136 1309 1047 1136 B33-FH-ROT-3 1226 1314 1533 1226 1314 1533 1288 1398 1610 1288 1398 B36-FH-ROT-3 1289 1382 1611 1289 1382 1611 1355 1469 1694 1355 1469 B42-FH-ROT-3 2052 2144 2565 2052 2144 2565 2117 2144 2646 2117 2144 DB12 805 821 1006 925 862 1156 805 862 1006 862 925 DB15 824 840 1030 944 882 1180 824 882 1030 882 944 DB18 896 914 1120 1016 960 1270 896 960 1120 960 1016 Pricing Base Full Height ROT Draw er Base DB21 968 987 1210 1088 1036 1360 968 1036 1210 1036 1088 DB24 1041 1062 1301 1161 1115 1451 1041 1115 1301 1115 1161 DB27 1112 1134 1390 1232 1191 1540 1112 1191 1390 1191 1232 DB30 1186 1210 1483 1306 1271 1633 1186 1271 1483 1271 1306 DB36 1423 1451 1779 1567 1524 1959 1423 1524 1779 1524 1567 DB15-2 700 750 875 700 788 875 735 788 919 788 735 DB30-2 1008 1080 1260 1008 1134 1260 1058 1134 1323 1134 1058 DB36-2 1134 1215 1418 1134 1276 1418 1191 1276 1489 1276 1191 DB24-1 431 462 539 481 485 601 431 485 539 485 481 For Finished End or Beaded End pricing please refer to page b7 Mar 2016 j9 Base Full Height 469 386 413 483 450 483 563 520 553 650 B9-FH 524 431 462 539 503 540 629 573 610 716 B12-FH 544 448 480 560 523 560 654 593 630 741 B15-FH 565 465 498 582 542 582 678 612 652 765 B18-FH 586 482 517 603 562 603 703 632 673 790 B21-FH 655 540 577 674 628 674 785 768 814 960 B24-FH 711 586 626 732 683 733 854 823 873 1029 B27-FH 770 635 679 793 740 794 925 880 934 1100 B30-FH 1060 873 934 1092 1017 1092 1271 1157 1232 1446 B33-FH 1130 931 996 1163 1085 1164 1356 1225 1304 1531 B36-FH 1264 1031 1093 1289 1192 1264 1490 1332 1404 1665 B42-FH Base Full Height ROT 541 598 677 651 698 814 721 768 901 B12-FH-ROT-1 703 562 619 703 675 724 844 745 794 931 B15-FH-ROT-1 728 582 642 727 699 750 874 769 820 961 B18-FH-ROT-1 753 602 663 752 722 775 903 792 845 990 B21-FH-ROT-1 825 662 727 827 792 850 990 932 990 1165 B24-FH-ROT-1 886 711 781 888 851 913 1064 991 1053 1239 B27-FH-ROT-1 950 762 837 953 912 978 1140 1052 1118 1315 B30-FH-ROT-1 1243 1004 1095 1255 1193 1280 1491 1333 1420 1666 B33-FH-ROT-1 1318 1065 1161 1331 1265 1358 1581 1405 1498 1756 B36-FH-ROT-1 1765 1421 1482 1777 1622 1690 2028 1762 1830 2203 B42-FH-ROT-1 833 652 734 815 799 858 999 869 928 1086 B12-FH-ROT-2 861 675 759 844 827 888 1034 897 958 1121 B15-FH-ROT-2 890 698 785 873 855 918 1069 925 988 1156 B18-FH-ROT-2 919 721 810 901 882 947 1103 952 1017 1190 B21-FH-ROT-2 996 784 878 980 957 1027 1196 1097 1167 1371 B24-FH-ROT-2 1061 837 935 1046 1019 1093 1274 1159 1233 1449 B27-FH-ROT-2 1129 891 995 1114 1084 1163 1355 1224 1303 1530 B30-FH-ROT-2 1426 1136 1257 1419 1369 1470 1711 1509 1610 1886 B33-FH-ROT-2 1505 1199 1327 1499 1445 1551 1806 1585 1691 1981 B36-FH-ROT-2 2329 1828 1954 2285 2139 2227 2674 2279 2367 2849 B42-FH-ROT-2 988 788 873 985 951 1022 1189 1021 1092 1276 B12-FH-ROT-3 1020 814 902 1018 983 1057 1229 1053 1127 1316 B15-FH-ROT-3 1054 840 932 1050 1014 1090 1268 1084 1160 1355 B18-FH-ROT-3 1086 867 960 1083 1046 1125 1308 1116 1195 1395 B21-FH-ROT-3 1168 932 1032 1164 1125 1209 1406 1265 1349 1581 B24-FH-ROT-3 1238 987 1094 1234 1191 1280 1489 1331 1420 1664 B27-FH-ROT-3 1309 1044 1157 1305 1260 1354 1575 1400 1494 1750 B30-FH-ROT-3 1610 1285 1424 1606 1551 1667 1939 1691 1807 2114 B33-FH-ROT-3 1694 1351 1497 1688 1631 1752 2039 1771 1892 2214 B36-FH-ROT-3 2646 2067 2183 2584 2393 2464 2991 2533 2604 3166 B42-FH-ROT-3 1156 757 950 946 885 1093 1106 885 1093 1106 DB12 1180 775 972 968 927 1118 1159 927 1118 1159 DB15 1270 842 1058 1053 995 1217 1244 995 1217 1244 DB18 1360 910 1143 1137 1063 1314 1329 1063 1314 1329 DB21 1451 979 1229 1223 1131 1414 1414 1131 1414 1414 DB24 1540 1045 1313 1307 1198 1510 1498 1198 1510 1498 DB27 1633 1115 1401 1394 1268 1611 1585 1268 1611 1585 DB30 1959 1338 1681 1672 1521 1933 1901 1521 1933 1901 DB36 919 746 911 933 772 1048 965 772 1048 965 DB15-2 1323 1074 1312 1343 1111 1508 1389 1111 1508 1389 DB30-2 1489 1209 1475 1511 1250 1696 1563 1250 1696 1563 DB36-2 601 405 535 506 464 615 580 464 615 580 DB24-1 Draw er Base Mar 2016 For Finished End or Beaded End pricing please refer to page b7 Pricing 678 j 10 1 Sink Base SB21 471 500 589 521 550 651 492 521 615 542 548 SB24 514 547 643 564 597 705 537 571 671 587 601 SB27 554 590 693 604 640 755 579 616 724 629 648 SB30 597 636 746 647 686 809 624 665 780 674 700 SB33 638 680 798 688 730 860 667 711 834 717 749 SB36 680 725 850 730 775 913 711 759 889 761 799 SB42 859 916 1074 909 966 1136 899 956 1124 949 1006 SB21-FH 500 531 625 500 531 625 522 554 653 522 554 SB24-FH 551 587 689 551 587 689 576 612 720 576 612 SB27-FH 595 634 744 595 634 744 622 663 778 622 663 SB30-FH 641 682 801 641 682 801 670 714 838 670 714 SB33-FH 684 728 855 684 728 855 715 763 894 715 763 SB36-FH 728 776 910 728 776 910 761 813 951 761 813 SB42-FH 823 875 1029 823 875 1029 859 911 1074 859 911 SB30-SS-L 1372 1411 1521 1422 1461 1584 1399 1440 1555 1449 1475 SB30-SS-R 1372 1411 1521 1422 1461 1584 1399 1440 1555 1449 1475 SB33-SS-L 1413 1455 1573 1463 1505 1635 1442 1486 1609 1492 1524 SB33-SS-R 1413 1455 1573 1463 1505 1635 1442 1486 1609 1492 1524 SB36-SS-L 1455 1500 1625 1505 1550 1688 1486 1534 1664 1536 1574 SB36-SS-R 1455 1500 1625 1505 1550 1688 1486 1534 1664 1536 1574 SFA36 427 457 534 477 507 596 448 485 560 448 511 SFA42 437 468 546 487 518 609 459 497 574 459 523 BPB24 989 1059 1236 1069 1139 1336 1038 1123 1298 1118 1123 BPB24-FH 814 872 1018 814 872 1018 854 924 1068 854 924 BBC36/39-L 658 738 823 708 788 885 724 838 905 774 882 BBC36/39-R 658 738 823 708 788 885 724 838 905 774 882 BBC42/45-L 710 796 888 760 846 950 781 903 976 831 950 BBC42/45-R 710 796 888 760 846 950 781 903 976 831 950 BBC42/45-LS-L 2202 2302 2753 2252 2352 2815 2256 2614 2820 2306 2614 BBC42/45-LS-R 2202 2302 2753 2252 2352 2815 2256 2614 2820 2306 2614 BER33 845 906 1056 845 906 1056 888 953 1110 888 953 BER36 878 940 1098 878 940 1098 922 997 1153 922 997 BER33-SS 1444 1547 1805 1444 1547 1805 1517 1629 1896 1517 1629 BER36-SS 1500 1607 1875 1500 1607 1875 1575 1704 1969 1575 1704 BEA12-FH-L 629 674 786 629 674 786 660 714 825 660 751 BEA12-FH-R 629 674 786 629 674 786 660 714 825 660 751 BES12 592 647 740 592 647 740 592 602 740 592 602 BTB12 527 556 659 577 584 721 547 567 684 597 597 BTB15 574 606 718 624 636 780 597 620 746 647 653 BTB18 684 719 855 734 755 918 709 730 886 759 768 BTB21 749 789 936 799 828 999 777 804 971 827 846 BTB9-FH 511 537 639 511 537 639 529 541 661 529 541 BTB12-FH 529 558 661 529 558 661 549 568 686 549 568 BTB15-FH 545 574 681 545 574 681 566 586 708 566 586 BTB18-FH 626 656 783 626 656 783 647 662 809 647 662 BTB21-FH 642 673 803 642 673 803 664 680 830 664 680 BWB15 890 953 1113 940 1003 1175 935 1053 1169 985 1106 BWB18 1036 1110 1295 1086 1160 1358 1088 1218 1360 1138 1279 B15-CTK 597 629 710 647 679 772 620 696 738 670 674 B18-CTK 661 696 786 711 746 848 686 771 817 736 747 B21-CTK 735 775 876 785 825 938 763 860 911 813 833 B24-CTK 813 857 968 863 907 1030 844 949 1006 894 920 B15-UTK 581 613 694 631 663 756 604 680 722 654 659 B18-UTK 653 688 778 703 738 840 678 763 809 728 Pricing Base Corner Base Specialty For Finished End or Beaded End pricing please refer to page b7 739 Mar 2016 j 11 Sink Base 678 501 557 626 578 612 723 648 682 810 734 548 610 685 634 673 793 774 813 968 SB21 SB24 786 591 659 739 685 727 856 825 867 1031 SB27 843 638 712 798 739 786 924 879 926 1099 SB30 896 682 761 853 791 841 989 931 981 1164 SB33 951 728 812 909 844 898 1055 984 1038 1230 SB36 1186 918 1022 1148 1062 1140 1328 1202 1280 1503 SB42 653 533 593 666 616 654 770 686 724 858 SB21-FH 720 588 655 736 681 723 851 821 863 1026 SB24-FH 778 636 709 795 736 782 920 876 922 1095 SB27-FH 838 685 764 857 793 844 991 933 984 1166 SB30-FH 894 731 816 914 847 902 1059 987 1042 1234 SB33-FH 951 779 869 974 903 961 1129 1043 1101 1304 SB36-FH 1074 877 975 1096 1013 1074 1266 1153 1214 1441 SB42-FH 1618 1413 1487 1573 1514 1561 1699 1654 1701 1874 SB30-SS 1618 1413 1487 1573 1514 1561 1699 1654 1701 1874 SB30-SS 1671 1457 1536 1628 1566 1616 1764 1706 1756 1939 SB33-SS 1671 1457 1536 1628 1566 1616 1764 1706 1756 1939 SB33-SS 1726 1503 1587 1684 1619 1673 1830 1759 1813 2005 SB36-SS 1726 1503 1587 1684 1619 1673 1830 1759 1813 2005 SB36-SS 560 462 519 577 538 551 673 608 621 760 SFA36 574 473 531 591 551 565 689 691 705 864 SFA42 1398 1069 1144 1336 1246 1337 1558 1386 1477 1733 BPB24 1068 880 941 1100 1025 1100 1281 1165 1240 1456 BPB24-FH 968 813 896 1016 853 1067 1140 923 1137 1154 BBC36/39-L 968 813 896 1016 853 1067 1140 923 1137 1154 BBC36/39-R 1039 873 966 1091 916 1151 1229 1053 1304 1316 BBC42/45-L 1039 873 966 1091 916 1151 1229 1053 1304 1316 BBC42/45-R 2883 2421 2663 3027 2542 2841 3558 n/a n/a n/a BBC42/45-LS-L 2883 2421 2663 3027 2542 2841 3558 n/a n/a n/a BBC42/45-LS-R 1110 932 971 1166 979 1137 1323 1119 1277 1399 1153 968 1015 1210 1017 1187 1383 1157 1327 1446 BER36 1896 1593 1660 1991 1672 1943 2260 1812 2083 2266 BER33-SS 1969 1654 1735 2067 1736 2028 2363 1876 2168 2346 Base Corner BER36-SS Base Specialty Mar 2016 825 683 764 854 793 850 991 863 920 1079 BEA12-FH-L 825 683 764 854 793 850 991 863 920 1079 BEA12-FH-R 740 556 611 696 592 603 740 592 603 740 BES12 746 552 607 690 632 660 790 702 730 878 BTB12 809 603 663 754 691 725 864 761 795 951 BTB15 949 713 781 892 813 847 1016 883 917 1104 BTB18 1034 783 860 979 895 934 1119 965 1004 1206 BTB21 661 531 552 664 604 627 755 674 697 843 BTB9-FH 686 554 579 692 633 661 791 703 731 879 BTB12-FH 708 571 597 713 653 683 816 723 753 904 BTB15-FH 809 649 674 811 738 765 923 808 835 1010 BTB18-FH 830 666 692 832 758 785 948 828 855 1035 BTB21-FH 1231 900 1161 1124 1393 1429 1741 1741 1429 2177 BWB15 1423 1044 1343 1305 1611 1652 2014 2014 1652 2517 BWB18 801 625 761 781 714 746 893 784 816 980 B15-CTK 879 692 843 865 790 825 988 860 895 1075 B18-CTK 973 770 941 962 881 921 1101 951 991 1189 B21-CTK 1069 852 1038 1065 974 1017 1218 1114 1157 1393 B24-CTK 785 610 744 763 698 731 873 768 801 960 B15-UTK 871 684 835 855 782 818 978 852 888 1065 B18-UTK For Finished End or Beaded End pricing please refer to page b7 Pricing BER33 j 12 Pricing 1 B21-UTK 735 775 876 785 825 938 763 860 911 813 833 B24-UTK 809 853 964 859 903 1026 840 945 1002 890 916 B15-KBK 673 705 786 723 755 848 696 772 814 746 745 B18-KBK 768 803 893 818 853 955 793 878 924 843 846 B21-KBK 861 901 1002 911 951 1064 889 986 1037 939 950 B24-KBK 916 960 1071 966 1010 1133 947 1052 1109 997 1016 B15-WTCD 785 817 898 835 867 960 808 846 926 858 873 B18-WTCD 855 890 980 905 940 1042 880 922 1011 930 952 1052 B21-WTCD 942 982 1083 992 1032 1145 970 1019 1118 1020 B24-WTCD 1018 1062 1173 1068 1112 1235 1049 1101 1211 1099 1138 B15-ROT-1-WTCD 900 940 1041 950 990 1104 928 977 1076 978 1010 B18-ROT-1-WTCD 973 1017 1127 1023 1067 1190 1004 1056 1166 1054 1094 B21-ROT-1-WTCD 1063 1112 1234 1113 1162 1297 1097 1156 1277 1147 1196 B24-ROT-1-WTCD 1142 1195 1328 1192 1245 1390 1179 1243 1374 1229 1287 B15-ROT-2-WTCD 1015 1063 1185 1065 1113 1248 1049 1107 1228 1099 1148 B18-ROT-2-WTCD 1091 1143 1275 1141 1193 1337 1128 1190 1321 1178 1234 B21-ROT-2-WTCD 1184 1241 1385 1234 1291 1448 1224 1293 1435 1274 1342 B24-ROT-2-WTCD 1266 1327 1483 1316 1377 1545 1309 1383 1536 1359 1435 DB15-WTCD 1159 1175 1365 1279 1217 1515 1159 1217 1365 1217 1279 DB18-WTCD 1253 1271 1477 1373 1317 1627 1253 1317 1477 1317 1373 DB21-WTCD 1347 1366 1589 1467 1415 1739 1347 1415 1589 1415 1467 DB24-WTCD 1441 1462 1701 1561 1515 1851 1441 1515 1701 1515 1561 BTB15-WTCD 909 941 1053 959 971 1115 932 955 1081 982 988 BTB18-WTCD 1041 1076 1212 1091 1112 1275 1066 1087 1243 1116 1125 BTB21-WTCD 1128 1168 1315 1178 1207 1378 1156 1183 1350 1206 1225 BWB15-WTCD 1225 1288 1448 1275 1338 1510 1270 1388 1504 1320 1441 BWB18-WTCD 1393 1467 1652 1443 1517 1715 1445 1575 1717 1495 1636 BFS6 553 568 691 553 568 691 553 568 691 553 568 BSP09 825 884 1031 825 884 1031 866 844 1083 866 844 BSP12 1138 1219 1423 1138 1219 1423 1195 1163 1494 1195 1163 FFD15 604 647 755 654 697 818 634 685 793 684 722 FFD18 653 700 816 703 750 879 686 741 858 736 780 FKD-30/27 310 316 388 325 341 450 325 381 388 360 401 FDD-30/27 235 240 294 235 240 294 235 240 294 235 240 FBS188412 1386 1483 1733 1386 1483 1733 1386 1483 1733 1386 1483 FBS248412 1474 1577 1843 1474 1577 1843 1474 1577 1843 1474 1577 FBS308412 1562 1671 1953 1562 1671 1953 1562 1671 1953 1562 1671 FBS368412 1650 1766 2063 1650 1766 2063 1650 1766 2063 1650 1766 U158412 915 1027 1144 915 1027 1144 1007 1132 1259 1007 1132 U188412 1030 1156 1288 1030 1156 1288 1133 1274 1416 1133 1274 U159012 957 1074 1196 957 1074 1196 1053 1184 1316 1053 1184 U189012 1077 1208 1346 1077 1208 1346 1185 1333 1481 1185 1333 U159612 985 1105 1231 985 1105 1231 1084 1218 1355 1084 1218 U189612 1103 1238 1379 1103 1238 1379 1213 1364 1516 1213 1364 U248412 1199 1345 1499 1199 1345 1499 1319 1483 1649 1319 1483 U249012 1256 1409 1570 1256 1409 1570 1382 1553 1728 1382 1553 U249612 1286 1443 1608 1286 1443 1608 1415 1590 1769 1415 1590 U158424 1113 1249 1391 1113 1249 1391 1224 1376 1530 1224 1376 U188424 1222 1371 1528 1222 1371 1528 1344 1511 1680 1344 1511 U159024 1162 1304 1453 1162 1304 1453 1278 1438 1598 1278 1438 U189024 1274 1429 1593 1274 1429 1593 1401 1576 1751 1401 1576 U159624 1188 1333 1485 1188 1333 1485 1307 1469 1634 1307 1469 U189624 1302 1461 1628 1302 1461 1628 1432 1611 1790 1432 1611 U248424 1397 1567 1746 1397 1567 1746 1537 1728 1921 1537 1728 U308424 1998 2242 2498 1998 2242 2498 2198 2471 2748 2198 2471 U368424 2201 2470 2751 2201 2470 2751 2421 2722 3026 2421 Utility Cabinets For Finished End or Beaded End pricing please refer to page b7 2722 Mar 2016 j 13 973 770 941 962 881 921 1101 951 991 1189 1065 848 1034 1060 970 1014 1213 1110 1154 1388 B21-UTK B24-UTK 877 697 841 871 790 817 988 860 887 1075 B15-KBK 792 956 991 897 925 1121 967 995 1209 B18-KBK 888 1073 1110 1007 1039 1259 1077 1109 1346 B21-KBK 1172 948 1147 1186 1077 1113 1346 1217 1253 1521 B24-KBK 989 822 881 944 902 944 1044 972 1014 1131 B15-WTCD 1073 896 962 1030 984 1030 1141 1054 1100 1228 B18-WTCD 1180 987 1063 1139 1088 1140 1265 1158 1210 1353 B21-WTCD 1274 1068 1150 1235 1179 1236 1374 1319 1376 1549 B24-WTCD 1139 908 1021 1052 1047 1099 1225 1117 1169 1313 B15-ROT-1-WTCD 1228 982 1105 1138 1133 1190 1327 1203 1260 1415 B18-ROT-1-WTCD 1339 1074 1210 1247 1241 1304 1457 1311 1374 1544 B21-ROT-1-WTCD 1436 1153 1302 1341 1335 1403 1569 1475 1543 1744 B24-ROT-1-WTCD 1290 1025 1161 1197 1192 1254 1406 1262 1324 1494 B15-ROT-2-WTCD 1383 1102 1248 1289 1282 1349 1513 1352 1419 1601 B18-ROT-2-WTCD 1498 1196 1357 1400 1393 1467 1647 1463 1537 1734 B21-ROT-2-WTCD 1599 1279 1452 1499 1491 1571 1764 1631 1711 1939 B24-ROT-2-WTCD 1515 1110 1307 1303 1262 1453 1494 1262 1453 1494 DB15-WTCD 1627 1199 1415 1410 1352 1574 1601 1352 1574 1601 DB18-WTCD 1739 1289 1522 1516 1442 1693 1708 1442 1693 1708 DB21-WTCD 1851 1379 1629 1623 1531 1814 1814 1531 1814 1814 DB24-WTCD 1144 938 998 1089 1026 1060 1199 1096 1130 1286 BTB15-WTCD 1306 1070 1138 1249 1170 1204 1373 1240 1274 1461 BTB18-WTCD 1413 1162 1239 1358 1274 1313 1498 1344 1383 1585 BTB21-WTCD 1566 1235 1496 1459 1728 1764 2076 2076 1764 2512 BWB15-WTCD 1780 1401 1700 1662 1968 2009 2371 2371 2009 2874 BWB18-WTCD 691 520 568 650 553 568 691 553 568 691 BFS6 1083 931 860 1163 937 980 1171 937 980 1171 BSP09 1494 1284 1185 1605 1292 1337 1615 1292 1337 1615 BSP12 855 656 815 820 761 817 951 761 817 951 FFD15 920 711 881 888 823 883 1029 823 883 1029 FFD18 450 291 421 364 332 355 415 471 355 415 FKD-30/27 294 221 252 276 252 254 315 252 254 315 FDD-30/27 1733 1386 1483 1733 1386 1483 1733 1386 1483 1733 FBS188412 1843 1474 1577 1843 1474 1577 1843 1474 1577 1843 FBS248412 1953 1562 1671 1953 1562 1671 1953 1562 1671 1953 FBS308412 2063 1650 1766 2063 1650 1766 2063 1650 1766 2063 FBS368412 Utility Cabinets Mar 2016 1259 1032 1153 1290 1144 1237 1430 1319 1412 1649 U158412 1416 1162 1298 1452 1339 1393 1674 1514 1568 1893 U188412 1316 1079 1206 1349 1244 1294 1555 1419 1469 1774 U159012 1481 1214 1357 1518 1400 1457 1750 1575 1632 1969 U189012 1355 1111 1241 1389 1281 1332 1601 1491 1542 1864 U159612 1516 1245 1390 1556 1434 1491 1793 1644 1701 2055 U189612 1649 1353 1511 1691 1559 1622 1949 1909 1972 2386 U248412 1728 1417 1582 1771 1633 1698 2041 1983 2048 2479 U249012 1769 1450 1620 1813 1672 1739 2090 2092 2159 2615 U249612 1530 1256 1402 1570 1447 1505 1809 1622 1680 2028 U158424 1680 1378 1540 1723 1589 1652 1986 1764 1827 2205 U188424 1598 1310 1464 1638 1511 1571 1889 1686 1746 2108 U159024 1751 1437 1606 1797 1656 1722 2070 1831 1897 2289 U189024 1634 1340 1497 1676 1544 1607 1930 1754 1817 2193 U159624 1790 1468 1641 1835 1693 1761 2116 1903 1971 2379 U189624 1921 1575 1760 1969 1816 1889 2270 2166 2239 2708 U248424 2748 2254 2517 2818 2597 2701 3246 2947 3051 3684 U308424 3026 2483 2773 3103 2861 2976 3576 3211 3326 4014 U368424 For Finished End or Beaded End pricing please refer to page b7 Pricing 986 1099 j 14 1 U249024 1460 1638 1825 1460 1638 1825 1606 1806 2008 1606 1806 U309024 1981 2223 2476 1981 2223 2476 2179 2450 2724 2179 2450 U369024 2512 2818 3140 2512 2818 3140 2763 3107 3454 2763 3107 U249624 1525 1711 1906 1525 1711 1906 1678 1886 2098 1678 1886 U309624 2027 2274 2534 2027 2274 2534 2230 2507 2788 2230 2507 U369624 2571 2885 3214 2571 2885 3214 2828 3180 3535 2828 3180 U158424-ROT-4 1457 1635 1821 1457 1635 1821 1603 1802 2004 1603 1802 U188424-ROT-4 1566 1757 1958 1566 1757 1958 1723 1936 2154 1723 1936 U159024-ROT-4 1506 1690 1883 1506 1690 1883 1657 1863 2071 1657 1863 U189024-ROT-4 1617 1814 2021 1617 1814 2021 1779 2000 2224 1779 2000 U159624-ROT-4 1531 1718 1914 1531 1718 1914 1684 1893 2105 1684 1893 U189624-ROT-4 1646 1847 2058 1646 1847 2058 1811 2036 2264 1811 2036 U248424-ROT-4 1741 1953 2176 1741 1953 2176 1915 2153 2394 1915 2153 U308424-ROT-4 2341 2627 2926 2341 2627 2926 2575 2895 3219 2575 2895 U368424-ROT-4 2545 2855 3181 2545 2855 3181 2800 3148 3500 2800 3148 U249024-ROT-4 1803 2023 2254 1803 2023 2254 1983 2230 2479 1983 2230 U309024-ROT-4 2325 2609 2906 2325 2609 2906 2558 2876 3198 2558 2876 U369024-ROT-4 2855 3203 3569 2855 3203 3569 3141 3531 3926 3141 3531 U249624-ROT-4 1869 2097 2336 1869 2097 2336 2056 2312 2570 2056 2312 U309624-ROT-4 2440 2738 3050 2440 2738 3050 2684 3018 3355 2684 3018 U369624-ROT-4 3006 3373 3758 3006 3373 3758 3307 3718 4134 3307 3718 OVD3384 1409 1581 1761 1409 1581 1761 1550 1743 1938 1550 1835 OVD3390 1551 1740 1939 1551 1740 1939 1706 1918 2133 1706 2019 OVD3396 1707 1915 2134 1707 1915 2134 1878 2112 2348 1878 2223 VSB18 382 429 478 432 479 540 420 477 525 470 502 VSB21 400 449 500 450 499 563 440 499 550 490 525 VSB24 485 544 606 535 594 669 534 606 668 584 638 VSB27 584 655 730 634 705 793 642 730 803 692 768 VSB30 615 690 769 665 740 831 677 768 846 727 808 VSB33 646 725 808 696 775 870 711 806 889 761 849 VSB36 675 757 844 725 807 906 743 843 929 793 887 VSB42 810 910 1013 890 990 1113 978 1015 1223 1028 1068 VB12 395 443 494 445 493 556 435 493 544 485 519 VB15 441 472 551 491 522 614 463 551 579 513 579 VB18 488 522 610 538 572 673 512 610 640 562 642 VSB18-FH 401 450 501 401 450 501 441 501 551 441 501 VSB21-FH 420 471 525 420 471 525 462 525 578 462 525 VSB24-FH 425 477 531 425 477 531 468 531 585 468 531 VSB27-FH 516 578 645 516 578 645 567 644 709 567 644 VSB30-FH 561 629 701 561 629 701 617 700 771 617 700 VSB33-FH 604 677 755 604 677 755 664 754 830 664 754 VSB36-FH 648 727 810 648 727 810 713 809 891 713 809 VDB12 663 676 829 783 710 979 663 693 829 783 727 VDB15 736 751 920 856 789 1070 736 770 920 856 808 VDB18 806 822 1008 926 846 1158 806 826 1008 926 867 VDB15-2 641 706 801 721 786 901 692 786 865 772 827 VCD24-L 736 827 920 876 967 1095 962 922 1203 1102 970 VCD24-R 736 827 920 876 967 1095 962 922 1203 1102 970 VCD30-L 773 869 966 913 1009 1141 1003 968 1254 1143 1019 VCD30-R 773 869 966 913 1009 1141 1003 968 1254 1143 1019 VCD36-L 890 1000 1113 1030 1140 1288 1132 1115 1415 1272 1174 VCD36-R 890 1000 1113 1030 1140 1288 1132 1115 1415 1272 1174 VSBD42 948 1065 1185 1068 1185 1335 1174 1188 1468 1294 1250 VSBD48 1029 1156 1286 1149 1276 1436 1263 1289 1579 1383 1357 VSB3D48 1097 1233 1371 1297 1433 1621 1424 1374 1780 1408 Utlity Cabinets ROT Pricing Vanity Cabinets For Finished End or Beaded End pricing please refer to page b7 1446 Mar 2016 j 15 2008 1647 1840 2059 1898 1974 2373 2248 2324 2810 U249024 2724 2234 2496 2793 2575 2678 3219 2925 3028 3656 U309024 3454 2833 3165 3541 3266 3396 4083 3616 3746 4520 U369024 2098 1720 1922 2150 1983 2062 2479 2403 2482 3004 U249624 2788 2286 2554 2858 2635 2741 3294 3055 3161 3819 U309624 3535 2900 3239 3625 3342 3476 4178 3762 3896 4703 U369624 Utlity Cabinets ROT 2004 1643 1836 2054 1894 1970 2368 2069 2145 2586 U158424-ROT-4 2154 1766 1973 2208 2036 2118 2545 2211 2293 2764 U188424-ROT-4 2071 1699 1897 2123 1958 2037 2448 2133 2212 2666 U159024-ROT-4 2224 1824 2038 2280 2102 2187 2628 2277 2362 2846 U189024-ROT-4 2105 1727 1929 2158 1990 2070 2488 2200 2280 2750 U159624-ROT-4 2264 1857 2074 2321 2140 2226 2675 2350 2436 2938 U189624-ROT-4 2394 1964 2193 2455 2263 2354 2829 2613 2704 3266 U248424-ROT-4 3219 2640 2949 3301 3043 3165 3804 3393 3515 4241 U308424-ROT-4 3500 2871 3207 3588 3309 3441 4136 3659 3791 4574 U368424-ROT-4 2479 2034 2272 2543 2344 2438 2930 2694 2788 3368 U249024-ROT-4 3198 2623 2930 3278 3023 3143 3779 3373 3493 4216 U309024-ROT-4 3926 3220 3597 4026 3712 3861 4640 4062 4211 5078 U369024-ROT-4 2570 2108 2355 2636 2430 2527 3038 2850 2947 3563 U249624-ROT-4 3355 2752 3074 3440 3172 3299 3965 3592 3719 4490 U309624-ROT-4 4134 3391 3787 4238 3908 4065 4885 4328 4485 5410 U369624-ROT-4 1938 1590 1864 1987 1832 2423 2290 1972 2563 2465 OVD3384 2133 1749 2052 2187 2016 2666 2520 2156 2806 2695 OVD3390 2348 1925 2259 2406 2219 2935 2774 2359 3075 2949 0 588 431 510 538 529 663 661 599 733 749 VSB18 613 451 534 564 554 694 693 624 764 780 VSB21 730 547 648 684 672 843 840 812 983 1015 VSB24 865 659 781 824 809 1015 1011 949 1155 1186 VSB27 909 694 821 867 852 1067 1065 992 1207 1240 VSB30 951 729 863 911 895 1121 1119 1035 1261 1294 VSB33 991 761 902 952 936 1172 1170 1076 1312 1345 VSB36 1285 916 1085 1144 1126 1410 1408 1266 1550 1583 VSB42 606 446 527 557 547 685 684 617 755 771 VB12 641 497 589 622 611 765 764 681 835 851 VB15 703 551 652 689 676 847 845 746 917 933 VB18 551 452 510 565 556 543 695 626 613 783 VSB18-FH 578 474 535 592 582 568 728 652 638 815 VSB21-FH 585 479 541 599 589 575 736 729 715 911 VSB24-FH 709 582 656 727 715 698 894 855 838 1069 VSB27-FH 771 633 714 791 777 758 971 917 898 1146 VSB30-FH 830 682 769 852 837 816 1046 977 956 1221 VSB33-FH 891 730 824 913 898 876 1123 1038 1016 1298 VSB36-FH 979 623 739 779 943 897 1179 943 897 1179 VDB12 1070 692 821 865 1019 974 1274 1019 974 1274 VDB15 1158 758 880 947 1096 1051 1370 1096 1051 1370 VDB18 965 710 840 887 872 1087 1090 872 1087 1090 VDB15-2 1378 839 986 1049 1023 1257 1279 1093 1327 1366 VCD24-L 1378 839 986 1049 1023 1257 1279 1093 1327 1366 VCD24-R 1429 882 1036 1102 1074 1321 1343 1144 1391 1430 VCD30-L 1429 882 1036 1102 1074 1321 1343 1144 1391 1430 VCD30-R 1590 1015 1193 1269 1237 1521 1546 1307 1591 1634 VCD36-L 1590 1015 1193 1269 1237 1521 1546 1307 1591 1634 VCD36-R 1618 1072 1270 1340 1318 1619 1648 1388 1689 1735 VSBD42 1729 1163 1379 1453 1430 1757 1788 1570 1897 1963 VSBD48 1760 1240 1469 1550 1525 1874 1906 1805 2154 2256 VSB3D48 For Finished End or Beaded End pricing please refer to page b7 Pricing Mar 2016 OVD3396 Vanity Cabinets j 16 1 VSB6D42 1380 1551 1725 1520 1691 1900 1671 1728 2089 1811 1819 VSB6D48 1428 1605 1785 1568 1745 1960 1724 1788 2155 1864 1882 VLC188421 1115 1251 1394 1115 1251 1394 1227 1339 1534 1227 1339 Accessories & Molding TCM8 204 235 255 204 235 255 204 235 255 204 235 ACM8 195 224 244 195 224 244 195 224 244 195 224 CVM8 204 235 255 204 235 255 204 235 255 204 235 CCM8 172 198 215 172 198 215 172 198 215 172 198 SCM8 97 112 121 97 112 121 97 112 121 97 112 OGP8 291 335 364 291 335 364 291 335 364 291 335 WC8 104 120 130 104 120 130 104 120 130 104 120 SM8 55 63 69 55 63 69 55 63 69 55 63 BM8 51 59 64 51 59 64 51 59 64 51 59 CTM8 122 140 153 122 140 153 122 140 153 122 140 IQR8 60 69 75 60 69 75 60 69 75 60 69 OCM8 63 72 79 63 72 79 63 72 79 63 72 UF1.542 31 35 39 31 35 39 31 35 39 31 35 UF1.596 66 76 83 66 76 83 66 76 83 66 76 UF330 38 44 48 38 44 48 38 44 48 38 44 UF336 47 54 59 47 54 59 47 54 59 47 54 UF342 52 60 65 52 60 65 52 60 65 52 60 UF384 129 148 161 129 148 161 129 148 161 129 148 UF390 138 158 173 138 158 173 138 158 173 138 158 UF396 147 169 184 147 169 184 147 169 184 147 169 UF642 98 113 123 98 113 123 98 113 123 98 113 UF684 255 293 319 255 293 319 255 314 319 255 314 UF690 273 314 341 273 314 341 273 335 341 273 335 UF696 291 335 364 291 335 364 291 335 364 291 335 AF330 119 137 149 119 137 149 119 137 149 119 137 AF336 138 159 173 138 159 173 138 159 173 138 159 AF342 157 181 196 157 181 196 157 181 196 157 181 FF330 117 135 146 117 135 146 117 135 146 117 135 FF336 127 146 159 127 146 159 127 146 159 127 146 FF342 131 151 164 131 151 164 131 151 164 131 151 FF396 205 236 256 205 236 256 205 236 256 205 236 AFF330 121 139 151 121 139 151 121 139 151 121 139 AFF336 140 161 175 140 161 175 140 161 175 140 161 AFF342 159 183 199 159 183 199 159 183 199 159 183 OVF630 96 110 120 96 110 120 96 110 120 96 110 OVF636 124 143 155 124 143 155 124 143 155 124 143 OVF642 130 150 163 130 150 163 130 150 163 130 150 CB3X3 40 46 50 40 46 50 40 46 50 40 46 PB3X4.5 55 63 69 55 63 69 55 63 69 55 63 BTK8 35 48 44 35 48 44 35 48 44 35 48 WEP1230 34 38 43 34 38 43 34 38 43 34 38 WEP1236 39 45 49 39 45 49 39 45 49 39 45 WEP1242 48 53 60 48 53 60 48 53 60 48 53 WEP1542 54 67 68 54 67 68 54 67 68 54 67 BEPL 69 78 86 69 78 86 69 78 86 69 78 BEPR 69 78 86 69 78 86 69 78 86 69 78 BEFP 69 78 86 69 78 86 69 78 86 69 78 TEPL 230 261 288 230 261 288 230 261 288 230 261 TEPR 230 261 288 230 261 288 230 261 288 230 261 TEFP 230 261 288 230 261 288 230 261 288 230 261 FP4896 445 494 556 445 494 556 445 494 556 445 494 FP9648 445 494 556 445 494 556 445 494 556 445 Pricing Fillers & Panels For Finished End or Beaded End pricing please refer to page b7 494 Mar 2016 j 17 2264 1575 1848 1968 1918 2357 2398 2058 2497 2573 2330 1629 1913 2036 1985 2439 2481 2125 2579 2656 VSB6D42 VSB6D48 1534 1258 1364 1572 1487 1508 1859 1662 1683 2078 VLC188421 255 204 235 255 204 235 255 204 235 255 TCM8 244 195 224 244 195 224 244 195 224 244 ACM8 255 204 235 255 204 235 255 204 235 255 CVM8 215 172 198 215 172 198 215 172 198 215 CCM8 121 97 112 121 97 112 121 97 112 121 SCM8 364 291 335 364 291 335 364 291 335 364 OGP8 130 104 120 130 104 120 130 104 120 130 WC8 69 55 63 69 55 63 69 55 63 69 SM8 64 51 59 64 51 59 64 51 59 64 BM8 153 122 140 153 122 140 153 122 140 153 CTM8 75 60 69 75 60 69 75 60 69 75 IQR8 79 63 72 79 63 72 79 63 72 79 OCM8 39 31 35 39 31 35 39 31 35 39 UF1.542 83 66 76 83 66 76 83 66 76 83 UF1.596 48 38 44 48 38 44 48 38 44 48 UF330 59 47 54 59 47 54 59 47 54 59 UF336 65 52 60 65 52 60 65 52 60 65 UF342 161 129 148 161 129 148 161 129 148 161 UF384 173 138 158 173 138 158 173 138 158 173 UF390 184 147 169 184 147 169 184 147 169 184 UF396 123 98 113 123 98 113 123 98 113 123 UF642 319 255 314 319 255 314 319 255 314 319 UF684 341 273 335 341 273 335 341 273 335 341 UF690 364 291 335 364 291 335 364 291 335 364 UF696 149 119 137 149 119 137 149 119 137 149 AF330 173 138 159 173 138 159 173 138 159 173 AF336 196 157 181 196 157 181 196 157 181 196 AF342 146 117 135 146 117 135 146 117 135 146 FF330 159 127 146 159 127 146 159 127 146 159 FF336 164 131 151 164 131 151 164 131 151 164 FF342 256 205 236 256 205 236 256 205 236 256 FF396 151 121 139 151 121 139 151 121 139 151 AFF330 175 140 161 175 140 161 175 140 161 175 AFF336 199 159 183 199 159 183 199 159 183 199 AFF342 120 96 110 120 96 110 120 96 110 120 OVF630 155 124 143 155 124 143 155 124 143 155 OVF636 163 130 150 163 130 150 163 130 150 163 OVF642 50 40 46 50 40 46 50 40 46 50 CB3X3 69 55 63 69 55 63 69 55 63 69 PB3X45 44 35 48 44 35 48 44 35 48 44 BTK8 43 34 38 43 34 38 43 34 38 43 WEP1230 49 39 45 49 39 45 49 39 45 49 WEP1236 60 48 53 60 48 53 60 48 53 60 WEP1242 68 54 67 68 54 67 68 54 67 68 WEP1542 86 69 78 86 69 78 86 69 78 86 BEPL 86 69 78 86 69 78 86 69 78 86 BEPR BEFP Molding & Accessories Fillers & Panels 69 78 86 69 78 86 69 78 86 230 261 288 230 261 288 230 261 288 TEPL 288 230 261 288 230 261 288 230 261 288 TEPR 288 230 261 288 230 261 288 230 261 288 TEFP 556 445 494 556 445 494 556 445 494 556 FP4896 556 445 494 556 445 494 556 445 494 556 FP9648 For Finished End or Beaded End pricing please refer to page b7 Pricing Mar 2016 86 288 j 18 1 BWEP1230 75 81 94 75 81 94 75 81 94 75 81 BWEP1236 90 98 113 90 98 113 90 98 113 90 98 BWEP1242 106 114 133 106 114 133 106 114 133 106 114 BWEP1542 133 143 166 133 143 166 133 143 166 133 143 BBEPL 173 198 216 173 198 216 173 198 216 173 198 BBEPR 173 198 216 173 198 216 173 198 216 173 198 BBEFP 173 198 216 173 198 216 173 198 216 173 198 BFP4848 482 554 603 482 554 603 482 554 603 482 554 BTEP1284L 211 239 264 211 239 264 211 239 264 211 239 BTEP1284R 211 239 264 211 239 264 211 239 264 211 239 BTEP2484L 422 479 528 422 479 528 422 479 528 422 479 BTEP2484R 422 479 528 422 479 528 422 479 528 422 479 BTEP1290L 226 256 283 226 256 283 226 256 283 226 256 BTEP1290R 226 256 283 226 256 283 226 256 283 226 256 BTEP2490L 452 513 565 452 513 565 452 513 565 452 513 BTEP2490R 452 513 565 452 513 565 452 513 565 452 513 BTEP1296L 241 277 301 241 277 301 241 277 301 241 277 BTEP1296R 241 277 301 241 277 301 241 277 301 241 277 BTEP2496L 482 554 603 482 554 603 482 554 603 482 554 BTEP2496R 482 554 603 482 554 603 482 554 603 482 554 BTEFP1296 241 277 301 241 277 301 241 277 301 241 277 BTEFP2496 482 554 603 482 554 603 482 554 603 482 554 DWR3 154 157 193 154 157 193 154 157 193 154 157 RR96 379 387 474 379 387 474 379 414 474 379 414 FL4836 190 248 238 190 248 238 190 248 238 190 248 DTEP3096 584 596 730 584 596 730 584 596 730 584 596 FS7212 257 262 321 257 262 321 257 262 321 257 262 WBEP 218 222 273 218 222 273 218 222 273 218 222 118 Pricing Supports & Decorative Doors CTS 103 118 129 103 118 129 103 118 129 103 MC10 399 455 499 399 455 499 399 455 499 399 455 TPL 89 102 111 89 102 111 89 102 111 89 102 PT336 834 916 1043 834 916 1043 834 916 1043 834 916 PS336 906 963 1133 906 963 1133 906 963 1133 906 963 PST336 499 540 624 499 540 624 499 540 624 499 540 PSS336 535 563 669 535 563 669 535 563 669 535 563 TKCAP 7 8 9 7 8 9 7 8 9 7 8 DDR1212 54 67 68 54 67 68 66 73 83 66 73 DDR1215 67 84 84 67 84 84 83 91 104 83 91 DDR1218 81 101 101 81 101 101 99 110 124 99 110 DDR1221 94 118 118 94 118 118 116 127 145 116 127 DDR1224 108 135 135 108 135 135 132 146 165 132 146 DDR1230 135 169 169 135 169 169 166 182 208 166 182 DDR1236 162 202 203 162 202 203 198 219 248 198 219 DDR1242 189 236 236 189 236 236 232 255 290 232 255 DDR1250 227 285 284 227 285 284 280 308 350 280 308 DDR2430 276 346 345 276 346 345 339 373 424 339 373 VSH30 113 130 141 113 130 141 113 130 141 113 130 VSH36 120 138 150 120 138 150 120 138 150 120 138 VSH42 129 148 161 129 148 161 129 148 161 129 148 VSH48 136 156 170 136 156 170 136 156 170 136 156 VSH60 149 171 186 149 171 186 149 171 186 149 171 VC30 169 194 211 169 194 211 169 194 211 169 194 VC36 185 213 231 185 213 231 185 213 231 185 213 VC42 199 229 249 199 229 249 199 229 249 199 229 VC48 206 237 258 206 237 258 206 237 258 206 237 VC60 213 245 266 213 245 266 213 245 266 213 Valance For Finished End or Beaded End pricing please refer to page b7 245 Mar 2016 j 19 94 75 81 94 75 81 94 75 81 94 BWEP1230 113 90 98 113 90 98 113 90 98 113 BWEP1236 133 106 114 133 106 114 133 106 114 133 BWEP1242 166 133 143 166 133 143 166 133 143 166 BWEP1542 216 173 198 216 173 198 216 173 198 216 BBEPL 216 173 198 216 173 198 216 173 198 216 BBEPR 216 173 198 216 173 198 216 173 198 216 BBEFP 603 482 554 603 482 554 603 482 554 603 BFP4848 264 211 239 264 211 239 264 211 239 264 BTEP1284L 264 211 239 264 211 239 264 211 239 264 BTEP1284R 528 422 479 528 422 479 528 422 479 528 BTEP2484L 528 422 479 528 422 479 528 422 479 528 BTEP2484R 283 226 256 283 226 256 283 226 256 283 BTEP1290L 283 226 256 283 226 256 283 226 256 283 BTEP1290R 565 452 513 565 452 513 565 452 513 565 BTEP2490L 565 452 513 565 452 513 565 452 513 565 BTEP2490R 301 241 277 301 241 277 301 241 277 301 BTEP1296L 301 241 277 301 241 277 301 241 277 301 BTEP1296R 603 482 554 603 482 554 603 482 554 603 BTEP2496L 603 482 554 603 482 554 603 482 554 603 BTEP2496R 301 241 277 301 241 277 301 241 277 301 BTEFP1296 603 482 554 603 482 554 603 482 554 603 BTEFP2496 193 154 157 193 154 157 193 154 157 193 DWR3 474 379 414 474 379 414 474 379 414 474 RR96 238 190 248 238 190 248 238 190 248 238 FL4836 730 584 596 730 596 608 745 596 608 745 DTEP3096 321 257 262 321 262 280 328 262 280 328 FS7212 273 218 222 273 218 222 273 218 222 273 WBEP Supports & Decorative Doors 129 103 118 129 103 118 129 103 118 129 CTS 499 399 455 499 399 455 499 399 455 499 MC10 89 102 111 89 102 111 89 102 111 TPL 927 916 1159 927 916 1159 927 916 1159 PT336 1133 1000 963 1250 1000 963 1250 1000 963 1250 PS336 624 593 540 741 593 540 741 593 540 741 PST336 669 629 563 786 629 563 786 629 563 786 PSS336 9 7 8 9 7 8 9 7 8 9 TKCAP 83 65 78 81 73 81 91 73 81 94 DDR1212 104 81 98 101 91 101 114 91 101 118 DDR1215 124 98 118 122 109 121 136 109 121 142 DDR1218 145 114 137 142 127 141 159 127 141 165 DDR1221 165 130 157 162 145 161 181 145 161 190 DDR1224 208 163 196 203 182 202 228 182 202 237 DDR1230 248 195 235 243 218 242 273 218 242 284 DDR1236 290 227 274 284 254 283 318 254 283 331 DDR1242 350 274 331 343 305 341 381 305 341 400 DDR1250 424 333 401 416 373 413 466 373 413 484 DDR2430 141 113 130 141 113 130 141 113 130 141 VSH30 150 120 138 150 120 138 150 120 138 150 VSH36 161 129 148 161 129 148 161 129 148 161 VSH42 170 136 156 170 136 156 170 136 156 170 VSH48 186 149 171 186 149 171 186 149 171 186 VSH60 211 169 194 211 169 194 211 169 194 211 VC30 231 185 213 231 185 213 231 185 213 231 VC36 249 199 229 249 199 229 249 199 229 249 VC42 258 206 237 258 206 237 258 206 237 258 VC48 266 213 245 266 213 245 266 213 245 266 VC60 Valance Mar 2016 For Finished End or Beaded End pricing please refer to page b7 Pricing 111 1043 j 20 Hardware 1 Pricing Cabinet Hardw are DH101 10 DH157 19 DH213 24 DH102 12 DH158 22 DH214 18 DH103 10 DH159 19 DH215 23 DH104 12 DH160 22 DH216 18 DH105 10 DH161 9 DH217 23 DH106 12 DH162 12 DH218 18 DH107 8 DH163 9 DH219 23 DH108 13 DH164 12 DH220 10 DH109 8 DH165 9 DH221 12 DH110 13 DH166 12 DH222 13 DH111 8 DH167 9 DH223 9 DH112 13 DH168 12 DH224 14 DH113 9 DH169 13 DH225 9 DH114 14 DH170 15 DH226 14 DH115 9 DH171 13 DH227 6 DH116 14 DH172 15 DH228 10 DH117 9 DH173 13 DH229 10 DH118 14 DH174 15 DH230 15 DH119 18 DH175 13 DH231 16 DH120 13 DH176 15 DH232 21 DH121 18 DH177 13 DH233 43 DH122 13 DH178 15 DH234 47 DH123 18 DH179 13 DH235 59 DH124 13 DH180 15 DH236 21 DH125 12 DH181 13 DH237 41 DH126 18 DH182 15 DH238 47 DH127 12 DH183 20 DH239 18 DH128 18 DH184 26 DH240 22 DH129 9 DH185 20 DH241 34 DH130 14 DH186 26 DH131 9 DH187 20 DH132 14 DH188 26 DH133 19 DH189 20 DH134 20 DH190 26 DH135 19 DH191 20 DH136 20 DH192 26 DH137 19 DH193 19 DH138 20 DH194 19 DH139 14 DH195 19 DH140 20 DH196 19 DH141 14 DH197 19 DH142 20 DH198 19 DH143 17 DH199 19 DH144 20 DH200 19 DH145 17 DH201 19 DH146 20 DH202 19 DH147 12 DH203 19 DH148 20 DH204 19 DH149 12 DH205 16 DH150 20 DH206 12 DH151 12 DH207 24 DH152 20 DH208 16 DH153 19 DH209 12 DH154 22 DH210 24 DH155 19 DH211 16 DH156 22 DH212 12 For Finished End or Beaded End pricing please refer to page b7 Mar 2016 j 21 Parts Parts Glides GLIDE-INSET24 GLIDE-INSET21 GLIDE-DFX24 GLIDE-DFX21 GLIDE-DFX18 GLIDE-DFX15 GLIDE-DFX12 160 160 160 160 160 160 160 Hinges HINGE-FOL-SCD HINGE-FOL HINGE-INSET HINGE-INSET-W HINGE-INSET-CH LZ-HINGE BIFOLD-HINGE 10 10 14 14 45 36 44 Draw er Insert Kits UTK15A 147 UTK18A 163 UTK21A 172 UTK24A 195 CTK15A 131 CTK18A 155 CTK21A 172 CTK24A 191 KBK15A 223 KBK18A 270 KBK21A 298 KBK24A 298 157 157 159 168 170 179 187 192 195 157 157 159 168 170 179 187 192 195 157 ROT15-C 157 SH-CW27 62 ROT18-C 159 SH-WER24 61 ROT21-C 168 SH-WEA 38 ROT24-C 170 SH-BEA 49 ROT27-C ROT30-C ROT33-C 179 187 192 SH-BER33 SH-BER36 74 79 ROT36-C 195 38 39 40 41 42 43 44 45 46 47 49 48 49 50 51 52 53 54 55 56 57 59 61 55 55 55 55 55 55 55 55 55 69 69 69 69 69 69 Sink Tilt Outs Trays TO21 TO24 TO27 TO30 TO33 TO36 88 92 96 101 103 106 Miscl. Item s (Not Installed) Q-BUMPER SHELF-REST SHELF-CLIP LZ32K (36 Susan Spin Tray) LZ28K (33 Susan Spin Tray) LZ35H (Blind Half Moon Insert) SPO9 (Pull-out Insert for B9-FH) SPO12 (Pull-out Insert for B12-FH) WBT15 (Waste Basket 1 Can) WBT18 (Waste Basket 2 Can) SBL (Sink Base Liner) WB (Wire Basket Pull Out) 6 8 7 350 350 950 460 520 439 538 200 200 TB (Tow el Bar) 20 Pricing Roll Out Trays & Glides ROT12-A ROT15-A ROT18-A ROT21-A ROT24-A ROT27-A ROT30-A ROT33-A ROT36-A ROT12-B ROT15-B ROT18-B ROT21-B ROT24-B ROT27-B ROT30-B ROT33-B ROT36-B ROT12-C Shelves SH-912 SH-1212 SH-1512 SH-1812 SH-2112 SH-2412 SH-2712 SH-3012 SH-3312 SH-3612 SH-4212 SH-924 SH-1224 SH-1524 SH-1824 SH-2124 SH-2424 SH-2724 SH-3024 SH-3324 SH-3624 SH-4224 SH-CW24 Touch Up Kits TUK-M-SP (Maple Spice) TUK-M-SP-GLZ (Maple Spice Glz) TUK-M-VAN (Painted Vanilla) TUK-M-VAN-LAT-GLZ (Painted Vanilla Gl TUK-M-WHITE (Painted White) TUK-CH-KF (Cherry Kafe) TUK-CH-CD (Cherry Cognac) TUK-QSO-TOF (Oak Toffee) TUK-B-ESP (Birch Espresso) TUK-P-CH (Painted Charcoal) TUK-P-SG (Painted Sage) TUK-P-MR (Painted Merlot) TUK-P-SH (Painted Shale) TUK-P-GA (Painted Gray Ash) TUK-P-KG (Painted Keystone) 2-Tier Draw er Insert & Glides WTCD15 390 WTCD18 415 WTCD21 440 WTCD24 465 Mar 2016 For Finished End or Beaded End pricing please refer to page b7 j 22 Sample Doors 1 Pricing Door Sam ples (12" x 15") SKUs do NOT carry a list price - the price listed is actual Dealer cost and includes shipping. 99-SDR1-1215 Itasca Maple Spice 30 99-SDR28a-1215 Hampton Maple Spice 30 99-SDR4-1215 Itasca Cherry Kafe 30 99-SDR28i-1215 Hampton Painted White 30 99-SDR14p-1215 Itasca Cherry Cognac 30 99-SDR28f-1215 Hampton Painted Vanilla 30 99-SDR9-1215 Itasca Painted Vanilla 30 99-SDR28d-1215 Hampton Cherry Kafe 30 99-SDR12-1215 Itasca Oak Toffee 30 99-SDR28p-1215 Hampton Cherry Cognac 30 99-SDR13-1215 Itasca Painted White 30 99-SDR142-1215 Hampton Painted Gray Ash 30 99-SDR14-1215 Itasca Birch Espresso 30 99-SDR154-1215 Hampton Painted Keystone 30 99-SDR100-1215 Itasca Painted Gray Ash 30 99-SDR143-1215 Hampton Painted Shale 30 99-SDR147-1215 99-SDR101-1215 99-SDR102-1215 Itasca Painted Keystone Itasca Painted Shale Itasca Painted Sage 30 30 30 99-SDR144-1215 99-SDR145-1215 99-SDR146-1215 Hampton Painted Sage Hampton Painted Merlot Hampton Painted Charcoal 30 30 30 99-SDR103-1215 Itasca Painted Merlot 30 99-SDR3-1215 Ramsey Maple Spice Glz 30 99-SDR104-1215 Itasca Painted Charcoal 30 99-SDR5-1215 Ramsey Painted Vanilla Glz 30 99-SDR17-1215 Olmsted Maple Spice 30 99-SDR6-1215 Ramsey Cherry Kafe 30 99-SDR18-1215 Olmsted Cherry Kafe 30 99-SDR23i-1215 Ramsey Painted White 30 99-SDR22p-1215 Olmsted Cherry Cognac 30 99-SDR23j-1215 Ramsey Birch Espresso 30 99-SDR19-1215 Olmsted Painted Vanilla 30 99-SDR125-1215 Ramsey Painted Vanilla 30 99-SDR20-1215 Olmsted Oak Toffee 30 99-SDR126-1215 Ramsey Painted Gray Ash 30 99-SDR21-1215 Olmsted Painted White 30 99-SDR151-1215 Ramsey Painted Keystone 30 99-SDR22-1215 Olmsted Birch Espresso 30 99-SDR127-1215 Ramsey Painted Shale 30 99-SDR105-1215 Olmsted Painted Gray Ash 30 99-SDR128-1215 Ramsey Painted Sage 30 99-SDR148-1215 Olmsted Painted Keystone 30 99-SDR129-1215 Ramsey Painted Merlot 30 99-SDR106-1215 Olmsted Painted Shale 30 99-SDR130-1215 Ramsey Painted Charcoal 30 99-SDR107-1215 Olmsted Painted Sage 30 99-SDR10-1215 Wayzata Maple Spice Glz 30 99-SDR108-1215 Olmsted Painted Merlot 30 99-SDR11-1215 Wayzata Cherry Cognac 30 99-SDR109-1215 Olmsted Painted Charcoal 30 99-SDR30c1215 Wayzata CH Maple Spice Glz 30 99-SDR7-1215 Nicollet Maple Caramel 30 99-SDR30d-1215 Wayzata CH Cherry Kafe 30 99-SDR25i-1215 Nicollet Painted White 30 99-SDR24I-1215 Princeton Painted White 30 99-SDR111-1215 Nicollet Painted Vanilla 30 99-SDR131-1215 Princeton Painted Vanilla 30 99-SDR112-1215 Nicollet Painted Gray Ash 30 99-SDR132-1215 Princeton Painted Gray Ash 30 99-SDR149-1215 Nicollet Painted Keystone 30 99-SDR152-1215 Princeton Painted Keystone 30 99-SDR113-1215 Nicollet Painted Shale 30 99-SDR133-1215 Princeton Painted Shale 30 99-SDR114-1215 Nicollet Painted Sage 30 99-SDR134-1215 Princeton Painted Sage 30 99-SDR115-1215 Nicollet Painted Merlot 30 99-SDR135-1215 Princeton Painted Merlot 30 99-SDR116-1215 Nicollet Painted Charcoal 30 99-SDR136-1215 Princeton Painted Charcoal 30 99-SDR16-1215 Kingston Maple Caramel 30 99-SDR29i-1215 Princeton CH Painted White 30 99-SDR117-1215 Kingston Painted White 30 99-SDR155-1215 Princeton CH Painted Vanilla 30 99-SDR118-1215 Kingston Painted Vanilla 30 99-SDR156-1215 Princeton CH Painted Gray Ash 30 99-SDR119-1215 99-SDR150-1215 Kingston Painted Gray Ash 30 99-SDR161-1215 Princeton CH Keystone 30 Kingston Painted Keystone 30 99-SDR157-1215 Princeton CH Painted Shale 30 99-SDR120-1215 Kingston Painted Shale 30 99-SDR158-1215 Princeton CH Painted Sage 30 99-SDR121-1215 Kingston Painted Sage 30 99-SDR159-1215 Princeton CH Painted Merlot 30 99-SDR122-1215 Kingston Painted Merlot 30 99-SDR160-1215 Princeton CH Painted Charcoal 30 99-SDR123-1215 99-SDR27a-1215 99-SDR27i-1215 99-SDR27f-1215 99-SDR27d-1215 99-SDR27p-1215 99-SDR137-1215 99-SDR153-1215 99-SDR138-1215 99-SDR139-1215 Kingston Painted Charcoal Renville Maple Spice Renville Painted White Renville Painted Vanilla Renville Cherry Kafe Renville Cherry Cognac Renville Painted Gray Ash Renville Painted Keystone Renville Painted Shale Renville Painted Sage 30 30 30 30 30 30 30 30 30 30 99-SDR31r-1215 99-SDR31p-1215 99-SDR31i-1215 99-SDR162-1215 99-SDR163-1215 99-SDR168-1215 99-SDR164-1215 99-SDR165-1215 99-SDR166-1215 99-SDR167-1215 Copenhagen Oak Espresso (June 2016) Copenhagen Cherry Cognac (Aug 2016) Copenhagen Painted White Copenhagen Painted Vanilla Copenhagen Painted Gray Ash Copenhagen Painted Keystone Copenhagen Painted Shale Copenhagen Painted Sage Copenhagen Painted Merlot Copenhagen Painted Charcoal 30 30 30 30 30 30 30 30 30 30 99-SDR140-1215 Renville Painted Merlot 30 99-SDR141-1215 Renville Painted Charcoal 30 For Finished End or Beaded End pricing please refer to page b7 Mar 2016 j 23 Marketing SKUs Marketing SKUs do NOT carry a list price - the price listed is actual Dealer cost and includes shipping. Corner Sam ple Set (99-CSSETA) $75 Door Case (99-DK3) $250 Corner Sample set includeds qty. 12 - 5” x 7” corners that cut from Door Kit Bag includes: Carry Bag, 1 set of qty. 12 - 12” x 15” actual doors. Also includes moulding chain and Color Set w ith 3” x 7" standard color sample doors, molding chain, Premier Paint chips of all of the Premier Paints. Color Samples, and Spec/Price Book. Corner Door Styles Include Door Styles Include: • Nicollet Painted Gray Ash • Nicollet Painted Gray Ash • Copenhagen Painted White • Copenhagen Painted White • Ramsey Painted Vanilla Glz • Ramsey Painted Vanilla Glz • Ramsey Cherry Kafe • Hampton Cherry Cognac • Ramsey Cherry Kafe • Hampton Cherry Cognac • Wayzata Cherry Kafe • Wayzata Cherry Kafe • Itasca Oak Toffee • Itasca Oak Toffee • Olmsted Painted Keystone • Olmsted Painted Keystone • Olmsted Birch Espresso • Olmsted Birch Espresso • Renville Maple Spice • Renville Maple Spice • Princeton Painted White • Princeton Painted White • Itasca Painted Vanilla • Itasca Painted Vanilla Mini Base ( 99-REPSB12) $125 Complete cabinet base (less shelf). 12” W x 24” H x 21” D. Has Door Case (99-SDR-1215-CASE) $85 Holds eight (8) 12" x 15" sample doors, reinforced w orking draw er box and left side has finished applied panel. nylon black material, side storage compartment for molding chain, NOTE: Only available in Itasca Maple Spice etc., removable shoulder strap & separate handle, tw o zipper suitcase style top opening, individual door separators. A minimum of 4’ or more of w all and base cabinetry is required for display order. Please consult w ith representative for design approval and pricing. Mar 2016 For Finished End or Beaded End pricing please refer to page b7 Pricing Displays j 24 Notes: Pricing 1 For Finished End or Beaded End pricing please refer to page b7 Mar 2016
Similar documents
List Price Schedule.
DR–Drawer Stack Position Right
FH–Full-Height Door
D–Drawers
Check with your local supplier for availability and pricing of our wide array
of styles, cabinets and accessories.
Note: In keeping with...