Projects

Transcription

Projects

Projects
Adirondack,
chair,
folding, 115:72 (Vol. 3)
and footrest, 149:74 (Vol. 4)
glider, 155:34 (Vol. 4)
settee, 125:70 (Vol. 4)
Air-compressor caddy, 190:52 (Vol. 5)
Angle bevel, homemade, 50:22 (Vol. 2)
Arbor, 141:68 (Vol. 4)
bench, 98:52 (Vol. 3)
swing, 116:52 (Vol. 3); 141:68 (Vol. 4)
trellised, 148:46 (Vol. 4)
Assembly table, 190:32 (Vol. 5)
tablesaw, 178:46 (Vol. 5)
Bagel slicer, 103:58 (Vol. 3)
Bandsaw,
accessory storage, 166:102 (Vol. 5)
dust control, 99:14 (Vol. 3)
fence, 113:16 (Vol. 3)
multi-jig, 113:60 (Vol. 3)
resawing jig, 137:20 (Vol. 4);
176:90 (Vol. 5)
table,
accessories, 149:56 (Vol. 4)
system, 149:50 (Vol. 4)
Bandsaw blade holder, 60:84 (Vol. 2)
Bank,
apple, 15:48 (Vol. 1)
cockatoo, 95:44 (Vol. 3)
giraffe, 158:72 (Vol. 4)
post office, 25:77 (Vol. 1)
whale, 81:54 (Vol. 3)
Barstools, 45:49 (Vol. 2)
breakfast, 6:66 (Vol. 1)
Basket, 31:78 (Vol. 1)
laced wooden, 93:48 (Vol. 3)
scrollsawn, 107:56 (Vol. 3)
Bed,
Arts & Crafts, 158:40 (Vol. 4)
bunk, 144:48 (Vol. 4)
Mission, 82:62 (Vol. 3)
convertible, 173:44 (Vol. 5)
Country-fresh, 114:64 (Vol. 3)
knock-down, 183:52 (Vol. 5)
pencil-post, 187:24 (Vol. 5)
Shaker, 64:60 (Vol. 2)
sleigh, contemporary, 135:34 (Vol. 4)
trundle/day, 123:68 (Vol. 4)
Key = Issue:Page (Disc Volume)
Belt buckles, 20:80 (Vol. 1)
laminated, 71:66 (Vol. 2)
Belt sanding jig, stationary, 2:102 (Vol. 1)
Bench,
country, 27:72 (Vol. 1)
entry-area storage bench, 170:54 (Vol. 5)
garden, 156:74 (Vol. 4); 170:40 (Vol. 5)
options, 170:93 (Vol. 5)
with trellis, 176:58 (Vol. 5)
hall, 145:42 (Vol. 4)
outdoor, 17:68 (Vol. 1); 162:82 (Vol. 5)
wedged-tenon, 174:78 (Vol. 5)
with storage, 183:66 (Vol. 5)
wraparound tree, 190:38 (Vol. 5)
Bench plane holder, 50:9 (Vol. 2)
Benchtop tool table, lift-up, 103:16 (Vol. 3)
Benchtop risers, 193:24 (Vol. 5)
Benchtop work support, 87:10 (Vol. 3)
Benchtop-tool cabinet,
mobile, 76:48 (Vol. 3)
storage, 179:32 (Vol. 5)
Binder, WOOD magazine, 5:69 (Vol. 1)
Bird bath, 106:46 (Vol. 3)
Bird feeder, 19:74 (Vol. 1); 58:68; 63:46 (Vol. 2)
barnyard, 97:47 (Vol. 3)
contemporary, 36:76 (Vol. 2)
hummingbird feeder, 170:80 (Vol. 5)
suet, 146:30 (Vol. 4)
turned, 69:66 (Vol. 2); 118:78 (Vol. 3)
Victorian, 109:54 (Vol. 3)
Bird house,
acorn, 28:70 (Vol. 1)
mock clock, 96:68 (Vol. 3)
short branch saloon, 50:76 (Vol. 2)
tree motif, 59:68 (Vol. 2)
Tudor-style, 169:68 (Vol. 5)
wren, 10:68 (Vol. 1); 42:72 (Vol. 2)
Bistro stool, indoor/outdoor, 178:82 (Vol. 5)
Blade-height gauge, 22:58 (Vol. 1)
Blanket chest, 58:56 (Vol. 2);
161:64; 194:30 (Vol. 5)
cedar-lined, 175:40 (Vol. 5)
Block plane, homemade, 125:41 (Vol. 4)
Boat construction, 26:52 (Vol. 1)
Bookcases,
barrister’s, 21:66 (Vol. 1); 149:42 (Vol. 4);
195:28 (Vol. 5)
built-in, 132:60 (Vol. 4)
child’s, 153:84 (Vol. 4)
1
Bookcases, continued,
wall shelf, 77:50 (Vol. 3)
easy, 165:76 (Vol. 5)
Federal style, 131:50 (Vol. 4)
glass-door, 191:34 (Vol. 5)
heirloom, 171:38 (Vol. 5)
Mission, 116:62 (Vol. 3); 180:28 (Vol. 5)
solid-oak, 185:60 (Vol. 5)
tambour, 67:48 (Vol. 2)
three styles, 154:56 (Vol. 4)
traditional, 50:38 (Vol. 2)
Bookends,
bunny, 12:74 (Vol. 1)
columned, 57:72 (Vol. 2); 76:58 (Vol. 3)
cowboy boot, 28:72 (Vol. 1)
hardwood, 32:84 (Vol. 1)
photo frame, 159:59 (Vol. 4)
train-tunnel, 16:80 (Vol. 1)
Book/magazine rack, 114:54 (Vol. 3)
Bowls,
blanks & burls, 14:56 (Vol. 1)
fruit, 23:38 (Vol. 1)
laminated, 14:44 (Vol. 1); 60:46 (Vol. 2)
Southwest, 28:32 (Vol. 1)
stack-laminated, 28:26 (Vol. 1)
Native American, turned, 70:68 (Vol. 2)
potpourri, turned, 52:42 (Vol. 2)
quilted maple, 23:36 (Vol. 1)
ring, Robert St. Pierre, 5:28 (Vol. 1)
salad, turned, 159:48 (Vol. 4)
Boxes,
bandsawn, 95:32 (Vol. 3)
bird, 126:78 (Vol. 4)
clone, 6:44 (Vol. 1)
keepsake, 121:74 (Vol. 4)
scallop, 21:62 (Vol. 1)
crown molding, 104:72 (Vol. 3)
decorative, 68:65 (Vol. 2)
inlay lidded, 61:66 (Vol. 2)
jewelry, 75:56 (Vol. 2); 93:40 (Vol. 3);
134:52; 157:88 (Vol. 4); 165:64; 168:60;
191:70 (Vol. 5)
bandsawn, 55:58; 66:46 (Vol. 2)
curvy, 195:58 (Vol. 5)
floor model, 82:48 (Vol. 3)
stackable, 104:50 (Vol. 3)
zebrawood, 9:70 (Vol. 1)
keepsake, 106:66 (Vol. 3);
173:68; 175:86 (Vol. 5)
2
Boxes, continued,
letter, 117:84 (Vol. 3)
lids, decorative, 164:80 (Vol. 5)
multipurpose, 48:56 (Vol. 2)
nut cracker, 118:84 (Vol. 3)
pagoda, 176:40 (Vol. 5)
pen, 124:43 (Vol. 4)
photo, 137:66 (Vol. 4); 178:72 (Vol. 5)
playing card, 2:80 (Vol. 1)
potpourri, scrollsawn lid, 84:72 (Vol. 3)
pretty padauk, 2:84 (Vol. 1)
recipe card, 27:78 (Vol. 1)
Southwestern box, chip carved,
78:72 (Vol. 3)
tissue, 4:50 (Vol. 1)
trio, 181:78 (Vol. 5)
turned, 150:70 (Vol. 4)
veneered, 114:76 (Vol. 3)
Box-joint jig, 27:48 (Vol. 1);
104:6; 108:44 (Vol. 3); 127:66 (Vol. 4);
181:74 (Vol. 5)
Bracelet, 33:71 (Vol. 2)
designer, 1:74 (Vol. 1)
Breadboard panels, 186:18 (Vol. 5)
Bread box, 59:70 (Vol. 2)
Bridge, foot, 133:40 (Vol. 4)
Briefcase, 41:40 (Vol. 2)
Buffet,
Country, 95:60; 96:52 (Vol. 3)
Built-ins, modular, home, 142:86 (Vol. 4)
Business card holder, 39:40 (Vol. 2);
157:98 (Vol. 4)
Butcher-block work center, 125:50 (Vol. 4)
Buttons, decorative, 84:67 (Vol. 3)
Cabinets,
air-filtration, 55:48 (Vol. 2)
apothecary, 120:50 (Vol. 3)
bathroom, 163:67 (Vol. 5)
CDs, tapes, cassettes, 69:48 (Vol. 2);
128:64 (Vol. 4)
China, 169:44 (Vol. 5)
collector’s, 151:88 (Vol. 4)
construction, basic, 3:59 (Vol. 1)
corner, 174:38 (Vol. 5)
hutch, 74:72 (Vol. 2)
media, 104:64 (Vol. 3)
curio, cherry, 25:60 (Vol. 1)
custom, 136:50 (Vol. 4)
display, lighted, 136:72; 150:58 (Vol. 4)
Cabinets, continued,
entertainment or storage, 68:32 (Vol. 2)
fishing rod, 126:58 (Vol. 4)
flat-panel TV, 195:38 (Vol. 5)
floor, Idea Shop 5, 151:48 (Vol. 4)
garage utility system, 162:66 (Vol. 5)
gun, 40:44 (Vol. 2)
ice box, 79:38 (Vol. 3)
installing, 137:50 (Vol. 4)
ironing board, 117:69 (Vol. 3)
kitchen,
roll-around, 103:78 (Vol. 3)
room divider, 137:44 (Vol. 4)
media storage, 160:76 (Vol. 4)
medicine, 131:74 (Vol. 4)
mobile,
base, Idea Shop 5, 151:12 (Vol. 4)
flip top, 104:44 (Vol. 3)
tool, 147:92 (Vol. 4)
modular, 181:32 (Vol. 5)
shop, 100:62 (Vol. 3)
retrofit old television, 50:82 (Vol. 2)
router-bit, 153:69 (Vol. 4)
shop, 54:74 (Vol. 2)
showplace, 185:30 (Vol. 5)
sliding-door organizer, 189:49 (Vol. 5)
spice, 42:48 (Vol. 2)
stereo, 3:70 (Vol. 1)
tablesaw accessory, 118:62 (Vol. 3)
tool storage, 172:46 (Vol. 5)
wall mount, 72:58 (Vol. 2)
utility, mobile, 152:74 (Vol. 4)
wall, punched-tin, 94:46 (Vol. 3)
Calendar keeper, 187:68 (Vol. 5)
Candle box, Colonial, 36:38 (Vol. 2)
Candle holders, 78:66 (Vol. 3); 133:50 (Vol. 4)
arched, 145:58 (Vol. 4)
chimney-topped, 20:67 (Vol. 1)
Colonial, 36:40 (Vol. 2)
tulip, 31:84 (Vol. 1)
turned, 86:58 (Vol. 3)
Candy dish, turned, 128:60 (Vol. 4)
Canisters, kitchen, 15:72 (Vol. 1)
Carrier,
knitting, 51:52 (Vol. 2)
oval, Shaker, 40:54 (Vol. 2)
Carving,
Abe Lincoln, profile, 90:68 (Vol. 3)
ale bowl, 60:50 (Vol. 2)
Bachelor Farmer, 41:30 (Vol. 2)
block prints, 74:64 (Vol. 2)
Carving, continued,
bluegill, 34:74 (Vol. 2); 79:74 (Vol. 3)
blue heron, 83:74 (Vol. 3)
canvasback, 40:34 (Vol. 2)
cardinal, 36:74 (Vol. 2); 94:64 (Vol. 3)
caricature, 63:70 (Vol. 2)
carpenter, 85:72 (Vol. 3)
carousel horse, 109:76 (Vol. 3)
cigar store Indian, 42:38 (Vol. 2)
clowns, 82:58 (Vol. 3)
cookie molds, 49:30 (Vol. 2)
coral reef, 114:22 (Vol. 3)
coyote, 37:78 (Vol. 2)
daffodil, 53:60 (Vol. 2)
Daily Bread wall plaque, 44:48 (Vol. 2)
decoys, 113:78 (Vol. 3)
dogs, 62:59 (Vol. 2)
elephant, 64:48 (Vol. 2)
faces, caricature carving, 88:62 (Vol. 3)
feather pin, 55:44 (Vol. 2)
French Louie, 17:78 (Vol. 1)
Father Christmas, 26:84 (Vol. 1)
horn of plenty, 56:40 (Vol. 2)
Hillbilly Will, 24:76 (Vol. 1)
holiday angel, 32:94 (Vol. 1)
horn of plenty, 56:40 (Vol. 2)
horse, Refsal, 4:73 (Vol. 1)
Kris Kringle, 57:38 (Vol. 2)
letter opener, loon, 81:74 (Vol. 3)
loon, 71:48 (Vol. 2)
mice, 69:78 (Vol. 2)
mirror, oak leaf, 111:50 (Vol. 3)
moose, 64:72 (Vol. 2)
pilgrim couple, 56:44 (Vol. 2)
plate, chip-carved, 102:68 (Vol. 3)
relief, 27:36 (Vol. 1)
Roscoe the Raccoon, 29:60 (Vol. 1)
saloon, caricatures, 107:64 (Vol. 3)
sea serpent, 73:39 (Vol. 2)
serving board, 22:74 (Vol. 1)
Shalako pendant, 53:53 (Vol. 2)
shell drawer pull, 123:48 (Vol. 4)
signs, 121:76 (Vol. 4)
skier, Nordic, 84:78 (Vol. 3)
spoon, 76:48 (Vol. 3)
Statue of Liberty plaque, 72:74 (Vol. 2)
trade sign, 51:40 (Vol. 2)
tropical fish, 114:50 (Vol. 3)
trout, 58:34 (Vol. 2)
turtle, 67:58 (Vol. 2)
weather station, 50:44 (Vol. 2)
whale, 30:76 (Vol. 1)
3
Cattails and reeds, wooden, 25:80 (Vol. 1)
Casserole carrier, 116:82 (Vol. 3)
CD/DVD storage
boxes, stackable, 154:90 (Vol. 4)
cabinet, 69:48 (Vol. 2); 128:64 (Vol. 4)
rack, 39:54 (Vol. 2); 105:68 (Vol. 3);
170:28 (Vol. 5)
shelf, 140:46 (Vol. 4)
Centerfinder, 40:60 (Vol. 2)
and trammel, 161:36 (Vol. 5)
Chairs,
adirondack,
and footrest, 149:74 (Vol. 4)
dining,
oak, 10:40 (Vol. 1)
director’s, teak, 23:65 (Vol. 1)
mahogany, outdoor, 42:56 (Vol. 2)
Morris, 112:52 (Vol. 3)
outdoor, 61:48 (Vol. 2), 105:42 (Vol. 3)
rocking, 183:36 (Vol. 5)
porch, 52:58 (Vol. 2)
teddy bear, 66:36 (Vol. 2)
walnut, 121:53 (Vol. 4)
shorebird, 77:42 (Vol. 3)
Chaise lounge, 143:44 (Vol. 4)
and Chairs, 5:58 (Vol. 1)
Chamfer plane, homemade, 162:47 (Vol. 5)
Changing table/dresser, 174:62 (Vol. 5)
Chest,
five-drawer, 110:66 (Vol. 3)
heirloom, 13:46 (Vol. 1)
Chime,
blanket, Shaker-style, 127:60 (Vol. 4)
desk, 87:57 (Vol. 3)
door, 76:56 (Vol. 3)
hope, 142:74 (Vol. 4)
wind, 105:76 (Vol. 3); 156:94 (Vol. 4)
China cabinet, 169:44 (Vol. 5)
Chinese checker board, 186:72 (Vol. 5)
Chisel rack, 41:19, 55:76 (Vol. 2); 144:12 (Vol. 4)
Christmas tree ornaments, 2:86 (Vol. 1)
Christmas trees, scrollsawn, 84:74 (Vol. 3)
Circle jig, 110:28 (Vol. 3)
bandsaw, 113:36 (Vol. 3)
4
Clamp blocks, pipe and bar, 147:18 (Vol. 4)
Clamp rack, 3:109 (Vol. 1); 63:58 (Vol. 2);
64:25 (Vol. 2); 122:10 (Vol. 4);
191:56; 193:75; 194:18 (Vol. 5)
pipe, 79:18 (Vol. 3)
Clamps, panel, 112:48 (Vol. 3)
Clocks,
alarm, 119:80 (Vol. 3)
arched-top with drawers, 138:66 (Vol. 4)
Arts & Crafts, 63:32 (Vol. 2);
83:68 (Vol. 3)
mantel, 84:62 (Vol. 3);
168:80 (Vol. 5)
bracket, 174:73 (Vol. 5)
columned, 59:30 (Vol. 2)
curved glass wall, 115:42 (Vol. 3)
curved laminated, 182:82 (Vol. 5)
desk, 44:35 (Vol. 2); 159:74 (Vol. 4);
179:70 (Vol. 5)
art deco, 187:74 (Vol. 5)
novelty, 140:78 (Vol. 4)
gas pump, 122:62 (Vol. 4)
man-in-the-moon, 55:64 (Vol. 2)
mantel, 20:54 (Vol. 1); 194:54 (Vol. 5)
marbleized mantel, 42:74 (Vol. 2)
maritime, 102:72 (Vol. 3)
nautical, 62:32 (Vol. 2)
otter, 46:40 (Vol. 2)
pendant, 44:66 (Vol. 2)
pendulum, 61:39 (Vol. 2);
117:45 (Vol. 3)
and desk, 103:42 (Vol. 3)
sandblasted, 34:40 (Vol. 2)
saw shelf, 113:82 (Vol. 3)
dinosaurs, , 66:64 (Vol. 2)
heron, 67:66 (Vol. 2)
shop, 75:66 (Vol. 2)
Shaker, 49:66 (Vol. 2); 160:70 (Vol. 4)
shelf,
architectural, 153:105 (Vol. 4)
tall, 90:60 (Vol. 3)
contemporary, 22:40 (Vol. 1);
127:74 (Vol. 4)
kits, 123:43 (Vol. 4)
three great, 9:78 (Vol. 1)
turned, 58:70 (Vol. 2); 81:50 (Vol. 3)
banksia seed pod, 63:30 (Vol. 2)
Clocks, continued,
mirrored, 98:64 (Vol. 3)
teak, 19:78 (Vol. 1)
weather station, hourglass,
93:54 (Vol. 3)
wenge, 26:72 (Vol. 1)
workshop, 54:80 (Vol. 2)
Closet storage system, 161:38 (Vol. 5)
Clothes hamper, woven, 58:38 (Vol. 2)
Coasters and holder for glasses, 86:50 (Vol. 3);
139:44 (Vol. 4)
Coat rack,
c-clamp, 55:62 (Vol. 2)
child’s, 155:78 (Vol. 4)
Country, 145:48 (Vol. 4)
intarsia animals, 63:54 (Vol. 2)
rabbit, 22:67 (Vol. 1)
race car, 73:52 (Vol. 2)
Coat tree,
child’s , 51:78 (Vol. 2)
laminated oak, 8:42 (Vol. 1)
lamp, Mission, 88:72 (Vol. 3)
Coat hangers, bent lamination, 111:44 (Vol. 3)
Columns and arches, 137:54 (Vol. 4)
Cookbook holder, 150:88 (Vol. 4)
Cookie jar, 69:70 (Vol. 2)
Compass,
beam, 169:94 (Vol. 5)
shop homemade, 133:64 (Vol. 4)
Compost bin, 81:62 (Vol. 3)
Cope-cutting sled, 191:32 (Vol. 5)
Coping saw, foot-powered, 2:74 (Vol. 1)
Cradle,
knockdown, 85:54 (Vol. 3); 178:38 (Vol. 5)
pendulum, 19:58 (Vol. 1)
doll, 145:70 (Vol. 4)
Crib, 59:34 (Vol. 2)
convertible, 173:44 (Vol. 5)
Cupboard, 168:44 (Vol. 5)
shaker, 4:59 (Vol. 1)
variations, 163:94 (Vol. 5)
Cupola, 126:49 (Vol. 4)
Curio,
pedestal, 52:47 (Vol. 2)
shelf, 152:66 (Vol. 4)
and table, 166:60 (Vol. 5)
Cutlery,
handle, kits, 141:54 (Vol. 4)
steak knives, 48:70 (Vol. 2)
case, 48:82 (Vol. 2)
Cutting boards, 17:40 (Vol. 1);
83:62; 113:64 (Vol. 3)
art deco, cheese, 24:54 (Vol. 1)
bread, 92:64 (Vol. 3)
designs, 172:98 (Vol. 5)
end grain, 39:46 (Vol. 2); 172:82 (Vol. 5)
quilt block, 120:46 (Vol. 3)
six classy, 1:43 (Vol. 1)
toast, 24:55 (Vol. 1)
whale, 43:72 (Vol. 2)
with knife storage, 62:52; 73:36 (Vol. 2)
Cyclone, 100:54 (Vol. 3)
Dado jig,
exact-width, 126:84 (Vol. 4)
straightedge and story pole, 74:16 (Vol. 2)
Deck railing
light, outdoor, 107:70 (Vol. 3)
system, 141:72 (Vol. 4)
Depth gauge, homemade, 26:78 (Vol. 1)
Desk,
cabinet, 3:74 (Vol. 1)
child’s, 145:88 (Vol. 4)
drop-front, 193:32 (Vol. 5)
drop-leaf cabinet, 140:52 (Vol. 4)
lap, 159:82 (Vol. 4)
raised panel, 62:42 (Vol. 2)
sectional system, 164:46 (Vol. 5)
slant-front, 153:50 (Vol. 4)
tambour-topped, 32:44 (Vol. 1)
Desk organizer , 140:60 (Vol. 4)
Desk set, 57:54; 64:39 (Vol. 2); 86:52 (Vol. 3);
148:74 (Vol. 4)
child’s, 83:70 (Vol. 3)
computer, 80:62 (Vol. 3)
country drop-front, 120:62 (Vol. 3)
Craftsman-style, 105:60 (Vol. 3)
Dial-indicator, 123:12 (Vol. 4)
Disc sanding jig, 70:86 (Vol. 2)
Dish holder, 173:40 (Vol. 5)
Display box, miniature, 67:64 (Vol. 2)
Display case,
bow-front, 187:56 (Vol. 5)
credenza, 60:58 (Vol. 2)
glass dome, 42:68 (Vol. 2)
shadow box, wall hung, 85:68 (Vol. 3)
spoons and thimbles, 35:68 (Vol. 2)
tabletop, 171:54 (Vol. 5)
wall hung, 73:40 (Vol. 2)
Display stand, 125:60 (Vol. 4)
Doghouse, 80:52 (Vol. 3)
Door-handle jig, 84:55 (Vol. 3)
5
Door harp, 41:68 (Vol. 2)
Door knocker, woodpecker, 97:76 (Vol. 3)
Doormat, 94:42 (Vol. 3)
Door plaque, scrollsawn, 60:70 (Vol. 2)
Dovetail jig,
stabilizer fence, 95:24 (Vol. 3)
station, 160:100 (Vol. 4)
tilting table, 51:49 (Vol. 2)
Dowel chamfering jig, 154:12 (Vol. 4)
Dowel gauge, 96:74 (Vol. 3)
Drafting center, 108:82 (Vol. 3)
Drawer organizer, 148:102 (Vol. 4)
Drawer-pull jig, 84:54 (Vol. 3)
Dresser,
changing table, 174:62 (Vol. 5)
child’s, 144:58 (Vol. 4)
contemporary with mirror, 138:74 (Vol. 4)
mirror, 111:68 (Vol. 3)
Shaker, 188:34 (Vol. 5)
Dresser-top valet, 162:42; 188:41 (Vol. 5)
Drill bit holder, 3:109 (Vol. 1); 84:24 (Vol. 3);
159:20 (Vol. 4)
carousel, 175:22 (Vol. 5)
Forstner bits, 54:32 (Vol. 2)
Drilling jig,
step-and-repeat, 131:18 (Vol. 4)
three-ring binder, 4:67 (Vol. 1)
Drilling spheres, jig 127:16 (Vol. 4)
Drill organizer, wall-hung, 42:87 (Vol. 2)
Drill press,
angle jig, 121:60 (Vol. 4)
auxiliary table, 96:36 (Vol. 3);
86:38 (Vol. 3)
drum-sanding table, 143:14 (Vol. 4)
dust collector, 59:22 (Vol. 2)
jig, 84:53 (Vol. 3)
dowels, 70:84 (Vol. 2)
pattern sander, 136:20 (Vol. 4)
stand, 3:90 (Vol. 1)
table, 156:52 (Vol. 4)
table counterweight, 12:86 (Vol. 1)
Drum sander, 138:42 (Vol. 4)
guide, 180:26 (Vol. 5)
portable, 185:20 (Vol. 5)
Drying rack, 174:36 (Vol. 5)
Dry sink, oak, 33:40 (Vol. 2)
Dust collection, 126:14 (Vol. 4)
adapters, 43:23 (Vol. 2)
drill press, 119:70 (Vol. 3)
6
Dust collection, continued,
floor chute, 188:10 (Vol. 5)
helpers, 133:82 (Vol. 4)
hoods, 17:87 (Vol. 1)
planer, 43:48 (Vol. 2)
radial-arm saw, 43:46 (Vol. 2)
sanding drum, 156:16 (Vol. 4)
tablesaw, 107:94; 119:66 (Vol. 3)
workbench, 133:72 (Vol. 4)
Earrings,
designer, 23:64 (Vol. 1)
Easel,
for kids, 165:86 (Vol. 5)
photo-display, 167:84 (Vol. 5)
tabletop, 32:86 (Vol. 1)
Edge-banding guides, 160:34 (Vol. 4)
End-boring jig, 84:51 (Vol. 3)
End vise, quick-clamp, 3:88 (Vol. 1)
Entertainment center, 157:46 (Vol. 4)
Armoire, contemporary, 137:70 (Vol. 4)
bridge, 157:102 (Vol. 4)
compact, 165:42 (Vol. 5)
end table, 157:66 (Vol. 4)
shelf, 157:104 (Vol. 4)
tower cabinet, 157:48 (Vol. 4)
TV stand or coffee table, 157:54 (Vol. 4)
Exhaust fan, basement window, 106:12 (Vol. 3)
Fairing stick, 149:10 (Vol. 4)
Feather board, 157:40 (Vol. 4)
Fence, outdoor, 142:64 (Vol. 4)
Fence stop, cam-action, 38:17 (Vol. 2)
Fibonacci gauge, 173:13 (Vol. 5)
File cabinet, stackable, 21:72 (Vol. 1)
Finishing
center, 68:46 (Vol. 2)
turntable, 112:16 (Vol. 3)
Fireplace
screen, 130:68 (Vol. 4)
surround, 101:60 (Vol. 3)
Fish, decorative painted, 71:64 (Vol. 2)
Fishing net, laminated, 133:60 (Vol. 4)
Fishing pole rack, 30:68 (Vol. 1)
Flag display case, 144:82 (Vol. 4)
Flower-tower, Tuteur, 149:80 (Vol. 4)
Floor grates/switch plates, 134:68 (Vol. 4)
Flush-trim jig, 178:22 (Vol. 5)
plugs, 185:16 (Vol. 5)
Fluting jig, 187:16 (Vol. 5)
Fold-out work supports, 63:23 (Vol. 2)
Futon, 86:60 (Vol. 3); 139:36 (Vol. 4)
chair and ottoman, 99:66 (Vol. 3)
Garden markers, 114:62 (Vol. 3)
Garden potting bench, 140:34 (Vol. 4)
Garden shed, 123:50 (Vol. 4)
Gardening cold frame, 121:50 (Vol. 4)
Gate, garden, 142:58 (Vol. 4)
Geese lath-art, 68:52 (Vol. 2)
Giraffes, bandsawn, 68:62 (Vol. 2)
Glasses, wood stemmed, 108:74 (Vol. 3)
Glider, outdoor, 79:53 (Vol. 3)
Glue caddy, 25:68 (Vol. 1); 86:94 (Vol. 3);
156:22 (Vol. 4)
Goblets, turned, 80:50 (Vol. 3)
Goose, decorator, 63:66 (Vol. 2)
Gumball goose, 177:76 (Vol. 5)
Gun stocks, 25:56 (Vol. 1)
Hall seat, country, 78:40 (Vol. 3)
Hand plane rack, 17:52 (Vol. 1)
Handsaw rack, 48:14 (Vol. 2)
Handscrew clamps, homemade, 35:74 (Vol. 2)
Hardware tote, 61:16 (Vol. 2)
Hardware, wooden, 48:50 (Vol. 2)
Height gauge, 151:96 (Vol. 4)
High chair, 51:56 (Vol. 2)
Hinges, marking jig, 132:18 (Vol. 4)
Hold-down, 84:55 (Vol. 3)
Hole-boring guide, 166:14 (Vol. 5)
Horseshoe set, game, 142:94 (Vol. 4)
Hose holder, shop, 105:9 (Vol. 3)
Hose rack, garden, 123:46 (Vol. 4)
House sign, 134:60 (Vol. 4)
Hutch,
oak classic country, 182:38 (Vol. 5)
pine, 147:62 (Vol. 4)
Humidor, 98:47 (Vol. 3)
Ice cream scoop, turned, 191:76 (Vol. 5)
Intarsia,
angel, Judy Gale Roberts, 160:90 (Vol. 4)
balloon, wall hanging, 41:64 (Vol. 2)
cat, 44:28 (Vol. 2)
chickadee, 101:92 (Vol. 3)
coat rack, 63:54 (Vol. 2)
eagle, 171:60 (Vol. 5)
hummingbird, 34:58 (Vol. 2)
snowman, 75:72 (Vol. 2)
owl, 24:38 (Vol. 1)
Jelly bean machine, 43:80 (Vol. 2)
Jewelry box, 75:56 (Vol. 2); 93:40 (Vol. 3);
157:88 (Vol. 4); 165:64; 168:60;
Jewelry box, continued,
191:70 (Vol. 5)
bandsawn, 55:58; 66:46 (Vol. 2)
curvy, 195:58 (Vol. 5)
floor model, 82:48 (Vol. 3)
Jewelry case, 13:68 (Vol. 1); 39:42 (Vol. 2)
Jewelry stand, 177:58 (Vol. 5)
Jewelry, sweetheart stickpin, 14:80 (Vol. 1)
Jointer, hand-powered laminate, 85:26 (Vol. 3)
Jointer pushstick, 62:22 (Vol. 2)
Kerfing jig, 172:32 (Vol. 5)
Key chain,
alphabet, 46:79 (Vol. 2)
fish, 94:78 (Vol. 3)
kaleidoscopic, 180:80 (Vol. 5)
Kitchen appliance refacing, 136:64 (Vol. 4)
Kitchen countertop, 136:68 (Vol. 4)
Kitchen remodel, 136:45 (Vol. 4)
Kitchen room divider, cabinets, 137:44 (Vol. 4)
Kiln, solar, 70:44 (Vol. 2)
update, 74:48 (Vol. 2)
Knife
bread, 152:78 (Vol. 4)
handles, 184:92 (Vol. 5)
Knife holder, in-drawer, 184:94 (Vol. 5)
Knitting center, 88:56 (Vol. 3)
Knobs, hold-down, 40:22 (Vol. 2)
Laminate press, 164:96 (Vol. 5)
Lamp,
Arts and Crafts, 161:88 (Vol. 5)
base, laminated, 71:44 (Vol. 2)
Biedermeier-style, turned, 139:56 (Vol. 4)
coat tree, Mission, 88:72 (Vol. 3)
sailboat, 73:48 (Vol. 2)
shades, acrylic, 161:20 (Vol. 5)
storybook, 135:70 (Vol. 4)
table, 56:58 (Vol. 2); 118:56 (Vol. 3)
torchere, 27:58 (Vol. 1)
turned, 177:38 (Vol. 5)
Lantern, outdoor, 148:66 (Vol. 4)
Lathe,
homemade, 16:62 (Vol. 1)
chuck, 43:68 (Vol. 2)
mini, portable base, 101:56 (Vol. 3)
rest, 77:76 (Vol. 3)
stand retrofit, 85:42 (Vol. 3)
tool holder, 35:80 (Vol. 2); 148:34 (Vol. 4);
7
Lathe, continued,
176:14 (Vol. 5)
tool rest, 25:26 (Vol. 1)
Laundry center, 130:46 (Vol. 4)
Letter holder, scrollsawn, 62:56 (Vol. 2)
Letter opener,
bandsawn, 54:52 (Vol. 2); 156:65 (Vol. 4)
Level,
torpedo, 155:48 (Vol. 4)
Lighting,
fixtures, walnut, 10:58 (Vol. 1)
outdoor, 29:50 (Vol. 1)
support, workshop, 155:14 (Vol. 4)
wall sconces, Arts & Crafts, 132:66 (Vol. 4)
Lingerie chest, 189:34 (Vol. 5)
Locker, sports, 99:46 (Vol. 3)
Lumber storage, 65:42; 66:16 (Vol. 2);
160:36 (Vol. 4)
mobile, 144:72 (Vol. 4)
sheet goods, 72:98 (Vol. 2);
184:26 (Vol. 5)
Magazine rack, 168:30 (Vol. 5)
oak, 14:66 (Vol. 1)
and table, 168:76 (Vol. 5)
wall mounted, 58:64 (Vol. 2)
woven, 7:56 (Vol. 1)
Magazine storage, 108:50 (Vol. 3);
177:20; 193:66 (Vol. 5)
Magnets,
parrot, 12:73 (Vol. 1)
novelty, scrollsawn, 60:68 (Vol. 2)
Mailbox,
planter, 143:76 (Vol. 4)
scrollsawn front, 86:66 (Vol. 3)
Mallet,
dead-blow, 165:52 (Vol. 5)
turned, 46:6 (Vol. 2); 156:96 (Vol. 4)
woodworker’s, maple, 8:34 (Vol. 1)
Map, state quarters, 131:64 (Vol. 4)
Marking gauge, 145:12; 158:12 (Vol. 4)
collector’s edition, 1:62 (Vol. 1)
trammel, 98:74 (Vol. 3)
Marking knife, 160:42 (Vol. 4)
Matchbox, wall, Colonial, 36:43 (Vol. 2)
Media center, 46:50 (Vol. 2)
Mirrors,
cheval, 3:85 (Vol. 1); 49:52 (Vol. 2);
167:38 (Vol. 5)
Chippendale wall, 136:80 (Vol. 4)
8
Mirrors, continued,
cosmetic, 43:76 (Vol. 2)
dinosaur, 19:76 (Vol. 1)
dresser, 188:66 (Vol. 5)
dresser top, 82:54 (Vol. 3)
frame, arched-top, 2:113 (Vol. 1)
full-length, 175:72 (Vol. 5)
hand, 98:44 (Vol. 3)
marquetry, 124:64 (Vol. 4)
quilt-look, 20:76 (Vol. 1)
Shaker, 119:48 (Vol. 3)
wall, 32:80 (Vol. 1); 76:44 (Vol. 3);
146:8 (Vol. 4)
Federal, 78:63 (Vol. 3)
shelf, 87:46 (Vol. 3)
Miter box, 11:56 (Vol. 1)
Miter jig, tablesaw, 67:16; 67:34 (Vol. 2)
Mitersaw,
center, mobile, 119:60 (Vol. 3)
extension, 171:70 (Vol. 5)
fence stop, 104:22 (Vol. 3)
platform, 175:68 (Vol. 5)
stand, 104:62 (Vol. 3)
station, 153:14 (Vol. 4); 186:24 (Vol. 5)
Miter stop, 97:20 (Vol. 3)
Mobile base, Idea Shop 5, 151:12 (Vol. 4)
Mobile sawing, routing center, Idea Shop 5,
151:62 (Vol. 4)
Mobile,
child’s, 151:86 (Vol. 4)
parrot, 29:82 (Vol. 1)
Money clip & key chain, walnut, 20:68 (Vol. 1)
Mug rack, mallard, 13:62 (Vol. 1)
Multi-machine, 9:40 (Vol. 1)
Musical instrument kits, 105:56 (Vol. 3)
Music box,
nativity, 109:16 (Vol. 3)
tapered, 192:47 (Vol. 5)
Napkin holder, 29:80 (Vol. 1); 80:74 (Vol. 3);
189:20 (Vol. 5)
goose, 41:66 (Vol. 2)
woven, 45:76 (Vol. 2)
Napkin rings,
Nativity,
Nativity, continued,
folk-style, carved, 101:84 (Vol. 3)
Necklace,
leaves, 37:76 (Vol. 2)
metal, scrollsawn, 48:74 (Vol. 2)
swan, 22:66 (Vol. 1)
walnut, 8:71 (Vol. 1)
Nightstand, 187:36 (Vol. 5)
cherry, 16:74 (Vol. 1)
country-fresh, 113:25 (Vol. 3)
Craftsman, 108:52 (Vol. 3)
Noah’s ark, 46:76 (Vol. 2); 109:68 (Vol. 3)
Notepad holder, 19:63 (Vol. 1)
whale, 26:76 (Vol. 1)
Nutcracker, 66:72 (Vol. 2)
Oil lamps, decorator, 51:64 (Vol. 2)
Ornaments,
carved, 66:42 (Vol. 2)
heirloom tree, 26:83 (Vol. 1)
scrollsawn, 26:68 (Vol. 1); 57:66 (Vol. 2);
75:35 (Vol. 2); 145:74 (Vol. 4)
stars, chip carved, 75:70 (Vol. 2)
turned, 48:64; 57:70 (Vol. 2);
93:57 (Vol. 3); 166:52 (Vol. 5)
Outdoor serving station, 184:32 (Vol. 5)
Outfeed table, 84:50 (Vol. 3)
Ovals, layout, 25:48 (Vol. 1)
Palm-sander holder, 46:15 (Vol. 2)
Panel-cutting sled, 114:16 (Vol. 3)
Paper towel holder, 2:82 (Vol. 1); 163:38 (Vol. 5)
Paperweight, 18:64 (Vol. 1)
Pastry board, rolling pin, wall rack, 147:50 (Vol. 4)
Pastry stand, 126:74 (Vol. 4)
Patio cart, 11:32 (Vol. 1); 134:34 (Vol. 4)
Patio table and benches, 88:38 (Vol. 3)
Pedestal, frame and panel, 104:53 (Vol. 3)
Pendant,
bird, scrollsawn, 77:59 (Vol. 3)
tanglewood fireball, 80:70 (Vol. 3)
Penguins on parade, 109:86 (Vol. 3)
Pens, turned, 44:60 (Vol. 2); 106:56 (Vol. 3)
Pergola, 141:60 (Vol. 4)
Perfume vial, 61:29 (Vol. 2)
Periscope, 57:68 (Vol. 2)
Photo box, 137:66 (Vol. 4)
Picnic table, 191:60 (Vol. 5)
Picture frames, 21:50 (Vol. 1); 135:74 (Vol. 4);
144:68 (Vol. 4); 160:85 (Vol. 4);
Picture frames, continued,
art deco, 111:54 (Vol. 3)
Arts and Crafts, 120:68 (Vol. 3)
book, 59:66 (Vol. 2)
bookend, 159:59 (Vol. 4)
column, 61:64 (Vol. 2)
custom, 67:40 (Vol. 2)
double pivoting, 132:80 (Vol. 4)
fish, woodburning, 117:80 (Vol. 3)
Greene and Greene, 153:112 (Vol. 4)
how to, 106:74 (Vol. 3)
Mission, 169:86 (Vol. 5),
oval, 2:55 (Vol. 1); 133:68 (Vol. 4)
pint-sized, 31:82 (Vol. 1)
quarter round, 2:56 (Vol. 1)
rabbits, 45:80 (Vol. 2)
Southwestern, 125:14 (Vol. 4)
three-window, 180:58 (Vol. 5)
tilt, 2:52 (Vol. 1)
triple photo, 168:107 (Vol. 5)
turned sphere, 78:52 (Vol. 3)
walnut and maple, 2:54 (Vol. 1)
Picture frame clamps, 171:36 (Vol. 5)
Picture frame jig, 162:20 (Vol. 5)
Pie safe, 53:46 (Vol. 2)
Pipe-clamp pads, 94:102 (Vol. 3)
Pins, sailboat, 2:83 (Vol. 1)
Pizza paddle, 51:76 (Vol. 2)
Pizza peel, 150:86 (Vol. 4)
Place mat/ napkin rings, 7:54 (Vol. 1)
Planer,
auxiliary bed, 84:54 (Vol. 3)
outfeed support, 182:24 (Vol. 5)
thicknessing center, portable,
76:60 (Vol. 3)
Plant hanger, outdoor, 63:64 (Vol. 2)
Plant stand, 77:54 (Vol. 3);
124:46; 135:56 (Vol. 4);
175:58 (Vol. 5)
filigree, 28:42 (Vol. 1)
ladder, 177:79 (Vol. 5)
pedestal, 6:42; 10:87 (Vol. 1)
Stickley-style, 48:42 (Vol. 2)
Planters,
box, 169:56 (Vol. 5)
indoor, 91:62 (Vol. 3)
outdoor, 24:68 (Vol. 1); 106:40 (Vol. 3);
148:94 (Vol. 4)
bench, 97:36 (Vol. 3)
9
Plaques,
bronze, 87:70 (Vol. 3)
duck under glass, 43:57 (Vol. 2)
scrollsawn,
door 60:70 (Vol. 2)
fireplace, 59:28 (Vol. 2)
floral, 20:74 (Vol. 1)
teddy bear on wagon, 45:78 (Vol. 2)
Plate rack, 51:74 (Vol. 2)
country, 66:49 (Vol. 2); 83:64 (Vol. 3)
Plates,
holiday, scrollsawn, 74:68 (Vol. 2)
chip carved, 102:68 (Vol. 3)
Pliers rack, 49:20 (Vol. 2)
Plywood cart, mobile, 72:34 (Vol. 2)
Pocket-hole jigs,
drill guide, 65:76 (Vol. 2)
router, 124:16 (Vol. 4)
Potting bench, outdoor, 97:54 (Vol. 3)
Presidential coin flag, 181:46 (Vol. 5)
Printer stand, 192:66 (Vol. 5)
Psaltery, bowed, 34:68 (Vol. 2)
Pump dispenser, 46:74 (Vol. 2)
Pushblock, tablesaw, 68:74 (Vol. 2)
Puzzle,
barnyard, scrollsawn, 195:64 (Vol. 5)
bears, scrollsawn, 150:44 (Vol. 4)
block, 15:46 (Vol. 1)
fish, 147:58 (Vol. 4)
relief, scrollsawn, 40:70 (Vol. 2)
safari, scrollsawn, 184:44 (Vol. 5)
wooden, 182:32 (Vol. 5)
Quilt block hanging, 65:68 (Vol. 2)
Quilt hanger, 49:60 (Vol. 2); 101:86 (Vol. 3)
Quilt stand, 15:68 (Vol. 1); 52:72 (Vol. 2)
ladder, 186:62 (Vol. 5)
Shaker, 119:52 (Vol. 3)
Radial-arm saw stop, 79:44 (Vol. 3)
Radio/tape player, 7:82 (Vol. 1)
Recharging station, 103:20 (Vol. 3)
Recipe card holder, 32:89 (Vol. 1)
Reindeer,
scrollsawn, tabletop, 74:79 (Vol. 2);
138:72 (Vol. 4)
winter scene, 145:76 (Vol. 4)
Remodeling, family room, 132:46 (Vol. 4)
Remote control corral, 183:74 (Vol. 5)
Resaw jig,
bandsaw, 176:90 (Vol. 5)
10
Right-angle clamp jig, 84:53 (Vol. 3)
Rip-fence saddle, 141:12 (Vol. 4)
Rip fence, tablesaw, replacement,
31:60 (Vol. 1)
Ripping jigs, tablesaw, 88:94 (Vol. 3)
Rocking chair, 183:36 (Vol. 5)
porch, 52:58 (Vol. 2)
walnut, 121:53 (Vol. 4)
Roller stand, 135:44 (Vol. 4)
Rolling pin, turned, 25:74 (Vol. 1); 55:52 (Vol. 2)
Rose, bandsawn, 70:72 (Vol. 2)
Router,
bit storage, 135:20 (Vol. 4);
169:18; 172:28 (Vol. 5)
dado jig, 134:14 (Vol. 4)
fence, 144:10; 159:40 (Vol. 4)
jigs, 159:76 (Vol. 4)
station, all-purpose, 129:54 (Vol. 4)
stand, 170:20 (Vol. 5)
straightedge, 15:56 (Vol. 1);
129:88 (Vol. 4)
table, 4:32 (Vol. 1)
benchtop, 138:44 (Vol. 4)
fence system, 58:44 (Vol. 2)
heavy-duty, 33:50 (Vol. 2)
lift-up, 103:62 (Vol. 3)
mini, 125:26 (Vol. 4)
multi-joint jig, 87:50 (Vol. 3)
and organizer, 192:56 (Vol. 5)
tablesaw-wing, 58:48 (Vol. 2)
tilt-top, 109:80 (Vol. 3)
plunge, jig, 123:62 (Vol. 4)
push pad, 180:90 (Vol. 5)
Router table, 4:32 (Vol. 1)
fence system, 58:44 (Vol. 2)
heavy-duty, 33:50 (Vol. 2)
lift-up, 103:62 (Vol. 3)
mini, 125:26 (Vol. 4)
multi-joint jig, 87:50 (Vol. 3)
and organizer, 192:56 (Vol. 5)
tablesaw-wing, 58:48 (Vol. 2)
tilt-top, 109:80 (Vol. 3)
Salad tongs, 110:78 (Vol. 3); 161:28 (Vol. 5)
Salt and pepper mill, 164:41 (Vol. 5)
Salt and pepper shakers, 82:56 (Vol. 3);
144:14 (Vol. 4)
Salt and pepper shakers, continued,
turned, 15:60 (Vol. 1); 99:33 (Vol. 3)
Sanders & Sanding,
block,
odd-shaped, 173:96 (Vol. 5)
drum,
holder, 17:57 (Vol. 1)
table, 13:52 (Vol. 1)
edge, 133:20 (Vol. 4)
orbital, stand, 171:30 (Vol. 5)
pad, homemade, 30:71 (Vol. 1)
radius-sanding jig, 83:30 (Vol. 3)
thickness, 7:48 (Vol. 1)
Sanding center, 152:12 (Vol. 4)
supplies, 81:68 (Vol. 3)
Sanding table, 106:18 (Vol. 3)
Sandpaper,
cutting jig, 7:76 (Vol. 1); 190:85 (Vol. 5)
organizer, 56:80 (Vol. 2)
sanding-discs, 142:14 (Vol. 4); 189:32 (Vol. 5)
storage bin, 12:72 (Vol. 1)
Santa,
puzzle, 75:64 (Vol. 2)
carved, 39:78 (Vol. 2)
skiing, 56:48 (Vol. 2)
western-style, carved, 48:76 (Vol. 2)
Saw blade organizer,
organizer, 158:38 (Vol. 4)
rack, 58:16 (Vol. 2); 150:10 (Vol. 4)
Sawhorses, 6:82; 24:62 (Vol. 1)
knockdown, 115:20 (Vol. 3)
Sawhorse, cutting platform, 130:22 (Vol. 4)
Sconces, 181:70 (Vol. 5)
Scoop, brass, 15:75 (Vol. 1)
Scrapbook cover, 166:72 (Vol. 5)
Scraper, homemade, 28:68 (Vol. 1)
Scratch awl, homemade, 49:58 (Vol. 2)
Screwdriver, turned handle, 180:72 (Vol. 5)
Scrollsaw,
blade drawer, 76:93 (Vol. 3)
blade organizer, 34:80; 56:90 (Vol. 2)
Scrollsawing,
basket, 107:56 (Vol. 3)
box,
fish, 73:70 (Vol. 2)
potpourri, 84:72 (Vol. 3)
CD rack, 84:76 (Vol. 3)
Christmas trees, 84:74 (Vol. 3)
circus, 81:48 (Vol. 3)
clock, 111:72 (Vol. 3)
farm scene, 89:64 (Vol. 3)
flag, wall hanging, 49:64 (Vol. 2)
American, 139:74 (Vol. 4)
Canadian, 153:78 (Vol. 4)
greetings, 180:76 (Vol. 5)
hummingbird, 40:66 (Vol. 2)
kids on parade, 50:10 (Vol. 2)
letter holder, 62:56 (Vol. 2)
magnets, novelty, 60:68 (Vol. 2)
mailbox, 86:66 (Vol. 3)
map, state quarters, 131:64 (Vol. 4)
Nativity, 93:46 (Vol. 3)
necklace, metal, 48:74 (Vol. 2)
ornaments, 26:68 (Vol. 1); 57:66 (Vol. 2);
75:35 (Vol. 2); 145:74 (Vol. 4)
pendant, bird, 77:59 (Vol. 3)
picture frames, 52:70 (Vol. 2)
plaques,
cat, 154:96 (Vol. 4)
door 60:70 (Vol. 2)
fireplace, 59:28 (Vol. 2)
floral, 20:74 (Vol. 1)
plate, holiday, 74:68 (Vol. 2)
Presidential coin flag, 181:46 (Vol. 5)
puzzle,
barnyard, 195:64 (Vol. 5)
bears, 150:44 (Vol. 4)
relief, 40:70 (Vol. 2)
safari, 184:44 (Vol. 5)
quail cutout, 120:37 (Vol. 3)
reindeer, tabletop, 74:79 (Vol. 2); 138:72 (Vol. 4)
sailboat scene, 45:18 (Vol. 2)
shelves, 85:52 (Vol. 3); 128:56 (Vol. 4)
silhouette,
couple, 46:18 (Vol. 2)
Sherlock Holmes desk caddy,
85:76 (Vol. 3)
Valentine, 50:78 (Vol. 2)
snowflake, 101:68 (Vol. 3)
stand, 91:14 (Vol. 3)
trains, planes, and automobiles,
42:80 (Vol. 2)
turkey centerpiece, 56:42 (Vol. 2)
wagon, 1800s 88:70 (Vol. 3)
wall shelf, 85:52 (Vol. 3)
wastebasket, 132:86 (Vol. 4)
welcome sign, 58:66 (Vol. 2)
11
Scrollsawing, continued,
windmill plaque, 55:66 (Vol. 2)
winter wonderland, 49:62 (Vol. 2)
wisemen and camels, 84:60 (Vol. 3)
Serving tray, inlay, 26:48 (Vol. 1); 146:52 (Vol. 4)
Settee, oak, outdoor, 35:60 (Vol. 2)
Sewing machine cabinet, 94:68 (Vol. 3)
Shadow box, 143:86 (Vol. 4)
Sheet goods mover/lifter, 116:12 (Vol. 3)
Sheet goods rack, 72:98 (Vol. 2); 184:26 (Vol. 5)
Shelf pin-hole jig, 191:24; 195:18 (Vol. 5)
Shelves,
arch-topped, 18:58 (Vol. 1)
and bookcase, 77:50 (Vol. 3)
bookshelf, kitchen, 148:78 (Vol. 4)
CD and DVD storage, 140:46 (Vol. 4)
child’s airplane, 179:58 (Vol. 5)
contemporary, 140:68 (Vol. 4);
174:28 (Vol. 5)
crown-molding, 153:108 (Vol. 4)
curio, 88:66 (Vol. 3)
display, 91:44 (Vol. 3); 176:28 (Vol. 5)
wall, 95:50 (Vol. 3)
hallway, walnut, 7:62 (Vol. 1)
Mission, wall-hung, 84:82 (Vol. 3)
nautical boat, 107:40 (Vol. 3)
scrollsawn, 85:52 (Vol. 3); 128:56 (Vol. 4)
shop accessory, 139:24 (Vol. 4)
slanting, 170:66 (Vol. 5)
towel rack, 192:34 (Vol. 5)
tower, 178:52 (Vol. 5)
Shop cart, 180:42 (Vol. 5)
mobile, 166:88 (Vol. 5)
workbench, 185:49 (Vol. 5)
Shop organizers, 16:42 (Vol. 1)
Sideboard,
buffet, traditional, 155:66 (Vol. 4)
Sign, Southwestern, welcome, 42:70 (Vol. 2)
Sink cover, sunburst, 24:50 (Vol. 1)
Sled,
bentwood, 8:44 (Vol. 1)
child’s, 74:59 (Vol. 2)
Sleigh,
child’s, 39:49 (Vol. 2)
vintage, tabletop, 101:76 (Vol. 3)
Sofa, Mission, 129:42 (Vol. 4)
Southwest landscape, 33:62 (Vol. 2)
12
Speakers, hexagonal, 2:69 (Vol. 1)
Spice cabinet, country, 15:76 (Vol. 1)
Spice jars, walnut, 21:80 (Vol. 1)
Spice rack, 2:79 (Vol. 1); 158:50 (Vol. 4)
Spoon rack, 63:68 (Vol. 2)
Spray adhesive drawer, 111:20 (Vol. 3)
Steamer trunk, 110:56 (Vol. 3)
Stool,
bar, 45:49 (Vol. 2)
breakfast, 6:66 (Vol. 1)
bistro, indoor/outdoor, 178:82 (Vol. 5)
shop, 54:70 (Vol. 2); 124:80 (Vol. 4);
177:102 (Vol. 5)
step, 111:76 (Vol. 3)
block, child’s, 52:68 (Vol. 2)
Storage,
bins, 179:48 (Vol. 5)
multi-purpose, 110:90 (Vol. 3)
shop,
drawer, 183:48 (Vol. 5)
wall system, 152:86 (Vol. 4)
Straightedge setup gauges, 183:32 (Vol. 5)
Sundial stand, 52:54 (Vol. 2)
Suspended ceiling, wooden, 180:36 (Vol. 5)
Swing-arm support, 57:30 (Vol. 2)
Switch plates/floor grates, 134:68 (Vol. 4)
Tables,
bentwood, 128:74 (Vol. 4)
bistro, 177:28 (Vol. 5)
bow front, 172:62 (Vol. 5)
hallway, 65:30 (Vol. 2)
and chairs,
child’s, 13:74 (Vol. 1);
77:46 (Vol. 3)
doll, toy, 93:51 (Vol. 3)
coffee, 101:70 (Vol. 3)
burled, 18:40 (Vol. 1)
display, 81:42 (Vol. 3)
modern, 1:50 (Vol. 1)
modern oak, 7:78 (Vol. 1)
oval, 102:42 (Vol. 3)
Queen Anne-style, 49:42 (Vol. 2)
sleigh, 118:72 (Vol. 3)
dining,
oak, 9:65 (Vol. 1)
oak herringbone, 22:34 (Vol. 1)
Tables, continued,
sunburst, 17:58 (Vol. 1)
trestle, 28:48 (Vol. 1);
112:76 (Vol. 3)
drop-leaf, 181:58 (Vol. 5)
end,
cubes, 10:88 (Vol. 1)
folding tray, 122:82 (Vol. 4)
game, 167:88 (Vol. 5)
hall,
walnut, 122:54 (Vol. 4)
library, 5:50 (Vol. 1)
Limbert-style, 192:30 (Vol. 5)
modern waterfall, 4:51 (Vol. 1)
nesting, 179:38 (Vol. 5)
Mission-style, 121:46 (Vol. 4)
outdoor, 61:52 (Vol. 2)
chair side, 106:40 (Vol. 3)
mahogany, 43:64 (Vol. 2)
oval, 130:60 (Vol. 4)
parsons, 10:36 (Vol. 1)
patio, redwood, 6:50 (Vol. 1)
picnic, 191:60 (Vol. 5)
pint-sized, 5:56 (Vol. 1)
round, 150:52 (Vol. 4)
sectional, 182:60 (Vol. 5)
set, 188:54 (Vol. 5)
side server, 131:80 (Vol. 4)
sofa, Colonial, 36:34 (Vol. 2)
Southwest style, 44:36 (Vol. 2)
TV trio, 186:32 (Vol. 5)
Tablesaw,
blade storage, 183:80 (Vol. 5)
crosscut sled, 140:24 (Vol. 4);
165:96 (Vol. 5)
extensions, 12:64 (Vol. 1)
fence, 120:16 (Vol. 3)
auxiliary, laminate-cutting,
146:26 (Vol. 4)
saddle jig, 192:70 (Vol. 5)
helpers, 6:62 (Vol. 1)
hold-downs, 119:22 (Vol. 3)
jigs,
four task-tackling, 168:54 (Vol. 5)
miter, 84:52 (Vol. 3)
panel cutting, 62:34 (Vol. 2)
resaw, 46:80 (Vol. 2)
Tablesaw, continued,
taper, 18:45 (Vol. 1);
102:84 (Vol. 3)
simple, 188:12 (Vol. 5)
tenoning, 97:57 (Vol. 3)
universal, 93:70 (Vol. 3)
outfeed table, 117:62 (Vol. 3)
sliding add-on, 127:54 (Vol. 4)
Tablesaw base,
cabinet, 106:60 (Vol. 3); 118:62 (Vol. 3)
Tablesaw jig,
four task-tackling, 168:54 (Vol. 5)
miter, 84:52 (Vol. 3)
panel cutting, 62:34 (Vol. 2)
resaw, 46:80 (Vol. 2)
saddle jig, 192:70 (Vol. 5)
taper, 18:45 (Vol. 1); 102:84 (Vol. 3)
simple, 188:12 (Vol. 5)
tenoning, 97:57 (Vol. 3)
universal, 93:70 (Vol. 3)
Tabletop organizer, 169:82 (Vol. 5)
Taco Holder, 167:14 (Vol. 5)
Tape dispenser, wall-hung, 164:12 (Vol. 5)
Taper jig,
simple, 188:12 (Vol. 5)
tablesaw, 18:45 (Vol. 1); 102:84 (Vol. 3)
Tea cart, traditional, 99:74 (Vol. 3)
Teddy bear, tin punched, 53:74 (Vol. 2)
Telephone stand, 190:62 (Vol. 5)
Tenoning jig, tablesaw, 97:57 (Vol. 3)
Thanksgiving plate, chip-carved, 65:66 (Vol. 2)
Thermometer, Galileo, 151:94 (Vol. 4)
Thickness blocks, 84:51 (Vol. 3)
Thin-strip ripper, 45:58 (Vol. 2)
Tie rack, 12:71 (Vol. 1)
Tissue box cover-up, 54:50 (Vol. 2)
Toboggan, bentwood, 46:66 (Vol. 2)
Tongue drum, 172:58 (Vol. 5)
Tool base, roll-around, 100:66 (Vol. 3)
Tool caddy, 158:64 (Vol. 4)
Tool carousel, 144:64 (Vol. 4)
Tool chest, woodworker’s, 19:44 (Vol. 1);
142:42 (Vol. 4)
Tool handles, turned, 56:88 (Vol. 2)
Tool holders, pegboard, 100:6 (Vol. 3)
Tool mover, 76:65 (Vol. 3)
Tool stand, 129:28 (Vol. 4); 182:76 (Vol. 5)
Tool storage, mobile, 41:54 (Vol. 2)
Tool-storage tray, 93:12 (Vol. 3)
13
Toys,
4-pack carrier & cars, 2:78 (Vol. 1)
airplane,
Red Baron, 10:70 (Vol. 1)
riding, 89:50 (Vol. 3)
America’s Cup sailboat, 18:54 (Vol. 1)
auburn car, 110:84 (Vol. 3)
auto carrier, 118:80 (Vol. 3)
baja buggy, 26:74 (Vol. 1)
barn, 61:68 (Vol. 2)
bathtub battleship, 6:58 (Vol. 1)
bear hangers, 8:70 (Vol. 1)
bike, 100:74 (Vol. 3)
biplane, 32:90 (Vol. 1)
Boat, pull toy, 84:70; 90:66 (Vol. 3)
box, truck, 64:34 (Vol. 2)
building blocks, 164:30 (Vol. 5)
castle, 39:36 (Vol. 2)
bulldozer, 20:78 (Vol. 1)
caterpillar, 176:64 (Vol. 5)
crane, 185:68 (Vol. 5)
crane play structure, 11:60 (Vol. 1)
cribbage board, 26:80 (Vol. 1)
doll cradle, 30:60 (Vol. 1)
pendulum, 90:40 (Vol. 3)
doll furniture, 7:69 (Vol. 1)
doll house in a box, 34:46 (Vol. 2)
doll stroller, 20:71 (Vol. 1)
domino set, 11:44 (Vol. 1)
dragon, 62:54 (Vol. 2)
pull, 146:96 (Vol. 4)
duck pull, 31:42 (Vol. 1)
dump truck, 78:68 (Vol. 3); 122:72 (Vol. 4)
and lowboy, 24:32 (Vol. 1)
easel, 165:86 (Vol. 5)
excavator, 36:52 (Vol. 2); 194:62 (Vol. 5)
farmyard pull toys, 43:74 (Vol. 2)
fishing pole, 70:74 (Vol. 2)
floatplane, 46:58 (Vol. 2); 127:80 (Vol. 4)
folk, 14:48 (Vol. 1)
front-end loader, 41:34 (Vol. 2)
golf set, 75:74 (Vol. 2)
gum ball machine, 107:52 (Vol. 3)
heavy haulers, 33:72 (Vol. 2)
horseshoe set, 142:94 (Vol. 4)
kaleidoscope, 173:90 (Vol. 5)
kazoo, 92:66 (Vol. 3)
kid’s play structure, 23:72 (Vol. 1)
knitting needles, 77:40 (Vol. 3)
long-haul transport truck, 2:81 (Vol. 1)
milk truck & pickup, 27:80 (Vol. 1)
monster truck, 35:46 (Vol. 2)
14
Toys, continued,
peg board, learning, 37:58 (Vol. 2)
pickup truck, 74:80 (Vol. 2)
playhouse, 87:60 (Vol. 3)
puzzle,
car, 93:60 (Vol. 3)
caterpillar, 53:72 (Vol. 2)
safari, 69:72 (Vol. 2)
train, 66:62 (Vol. 2)
race cars, 76:72 (Vol. 3)
road grader, 45:62 (Vol. 2)
rocking horse, 14:62 (Vol. 1);
83:54 (Vol. 3); 193:50 (Vol. 5)
rocking snail, 61:58 (Vol. 2)
rubber-band dragster, 16:84 (Vol. 1)
safe, 3:55 (Vol. 1)
sandbox, 71:52 (Vol. 2)
sidewalk speedster, 115:59 (Vol. 3)
speedboat, 141:50 (Vol. 4)
stilts, 95:68 (Vol. 3)
storage center, 167:76 (Vol. 5)
take-apart jeep, 8:64 (Vol. 1)
teeter-totter, 79:68 (Vol. 3)
tongue drum, 172:58 (Vol. 5)
tool box, 44:56 (Vol. 2); 190:76 (Vol. 5)
tops, 29:84 (Vol. 1); 175:48 (Vol. 5)
tow truck, 12:42 (Vol. 1)
tractor, 37:56 (Vol. 2)
train, 14:74 (Vol. 1), 57:60 (Vol. 2);
128:78 (Vol. 4); 160:97 (Vol. 4)
engine, 95:37 (Vol. 3)
truck, farm, 92:68 (Vol. 3)
Tug-a-lug, 6:61 (Vol. 1)
Wagon, 53:76 (Vol. 2)
racer, 70:51 (Vol. 2)
sunshine express, 1:78 (Vol. 1)
wheelbarrow, 25:70 (Vol. 1)
woody car, 31:72 (Vol. 1)
wrecker, 50:68 (Vol. 2)
yo-yo, 26:71 (Vol. 1); 184:76 (Vol. 5)
zoo carousel, 25:72 (Vol. 1)
Train whistle, 29:70 (Vol. 1)
Trammel, scribe arcs or circles, 69:28 (Vol. 2)
Trays,
breakfast, oak, 12:68 (Vol. 1)
chip ‘n’ dip, 195:50 (Vol. 5)
nesting, 164:88 (Vol. 5)
serving, inlay, 26:48 (Vol. 1);
146:52 (Vol. 4)
snack,
lazy-susan, 116:84 (Vol. 3)
turned, 141:92 (Vol. 4)
Trays, continued,
Trellis,
arched, 163:82 (Vol. 5)
wall, 141:80 (Vol. 4)
Trivets,
wood and tile, 146:56 (Vol. 4)
turned, 154:70 (Vol. 4)
Try square, homemade, 37:33 (Vol. 2)
Turning,
bird feeder, 69:66 (Vol. 2);
118:78 (Vol. 3)
bottle stoppers, 91:58 (Vol. 3)
bowls,
Native American, 70:68 (Vol. 2)
potpourri, 52:42 (Vol. 2)
Salad, 159:48 (Vol. 4)
square-edge 161:60 (Vol. 5)
box, 150:70 (Vol. 4)
candy dish, 14:46 (Vol. 1); 128:60 (Vol. 4)
Christmas lightbulb, 137:86 (Vol. 4)
candlestick 86:58 (Vol. 3)
clock, 58:70 (Vol. 2); 81:50 (Vol. 3)
banksia seed pod, 63:30 (Vol. 2)
mirrored, 98:64 (Vol. 3)
teak, 19:78 (Vol. 1)
doorstop, 85:66 (Vol. 3)
eggs, 43:70 (Vol. 2)
faceplate, 14:38 (Vol. 1)
flowers, 41:61 (Vol. 2)
goblets, 80:50 (Vol. 3)
ice cream scoop, 191:76 (Vol. 5)
kaleidoscope, 89:44 (Vol. 3)
knitting needles, 77:40 (Vol. 3)
lamp, 177:38 (Vol. 5)
Biedermeier-style, 139:56 (Vol. 4)
lidded vessels, 83:60 (Vol. 3)
mallet, 46:6 (Vol. 2); 156:96 (Vol. 4)
mirror, 84:68 (Vol. 3)
miniature, 74:52 (Vol. 2)
mobile, balloon, 43:50 (Vol. 2)
music box, 53:69 (Vol. 2)
napkin rings, 25:50 (Vol. 1)
needle case, 71:30 (Vol. 2); 92:50 (Vol. 3)
noodle cutter, 46:72 (Vol. 2)
ornaments, 48:64; 57:70 (Vol. 2);
93:57 (Vol. 3); 166:52 (Vol. 5)
pen light, 124:74 (Vol. 4)
pens, 44:60 (Vol. 2); 106:56 (Vol. 3)
perfume,
applicator, 74:70 (Vol. 2)
decanter, 27:63 (Vol. 1)
Turning, continued,
picture frame, sphere, 78:52 (Vol. 3)
pincushions, 52:74 (Vol. 2)
plate jig, 45:84 (Vol. 2)
platter, 168:84 (Vol. 5)
pocket watch, 95:100 (Vol. 3)
pulls for curtains, 67:44 (Vol. 2)
rolling pin, 25:74 (Vol. 1); 55:52 (Vol. 2)
salad bowl, 110:74 (Vol. 3); 159:48 (Vol. 4)
salt & pepper shakers, 15:60 (Vol. 1);
99:33 (Vol. 3)
screwdriver, 180:72 (Vol. 5)
sewing needle holder, 92:50 (Vol. 3)
skewers, apple, 64:58 (Vol. 2)
snack tray, 141:92 (Vol. 4)
snow globe base, 75:62 (Vol. 2)
table, 96:42 (Vol. 3)
thread caddy, 76:68 (Vol. 3)
tool handles, 56:88 (Vol. 2)
toothpick dispenser, 182:72 (Vol. 5)
top, 175:48 (Vol. 5)
tray, 141:92 (Vol. 4)
trivets, 154:70 (Vol. 4)
tureen, 73:74 (Vol. 2)
urn, laminated, 65:60 (Vol. 2)
vase, 40:64 (Vol. 2); 125:66 (Vol. 4)
walking stick, 122:88 (Vol. 4)
water globe base, 157:86 (Vol. 4)
weed pots, 37:64 (Vol. 2)
wrist watch, 66:52 (Vol. 2)
yo-yo, 184:76 (Vol. 5)
TV,
cart, 1:64 (Vol. 1)
flat-panel, cabinet, 195:38 (Vol. 5)
stand,
or coffee table, 157:54 (Vol. 4)
and storage, 141:46 (Vol. 4)
Utensils,
kitchen, 79:60 (Vol. 3)
Vase,
Bruce Bernson, 19:80 (Vol. 1)
bud, 6:40 (Vol. 1); 194:28 (Vol. 5)
Ikebana, 99:56 (Vol. 3); 129:62 (Vol. 4);
180:68 (Vol. 5)
onlay, 22:33 (Vol. 1)
staved, 103:70 (Vol. 3)
turned, 40:64 (Vol. 2); 125:66 (Vol. 4)
weed pot, 11:74 (Vol. 1)
Vise jaw and wedge, 90:16 (Vol. 3)
15
Votive holder, 191:20 (Vol. 5)
Wagon,
Christmas, 8:78 (Vol. 1)
decorative, 44:64 (Vol. 2)
scrollsawn, 1800s 88:70 (Vol. 3)
sunshine express, 1:78 (Vol. 1)
toy, 53:76 (Vol. 2);
racer, 70:51 (Vol. 2)
Walking stick,
carved, 127:84 (Vol. 4)
turned, 122:88 (Vol. 4)
Wall hanging, bandsawn, 8:72 (Vol. 1)
Wall paneling, 132:52 (Vol. 4)
Wastebasket, scrollsawn, 132:86 (Vol. 4)
Weather station,
chip carved, 50:44 (Vol. 2)
Weather station, continued,
shelf-top, 154:64 (Vol. 4)
Weather vane, fox, 44:62 (Vol. 2)
Weed pots, turned, 37:64 (Vol. 2)
Wet-wheel grinder, 102:62 (Vol. 3)
Whale, 50:80 (Vol. 2)
Wheels, toy, 35:40 (Vol. 2)
Whirligig, airplane, 70:38 (Vol. 2)
Wine bottle holder, 171:8 (Vol. 5)
Wine box, gift-perfect, 174:54 (Vol. 5)
Wine cabinet, 172:38 (Vol. 5)
Wine rack, 20:64 (Vol. 1); 188:62 (Vol. 5)
Window frame, 136:78 (Vol. 4)
Window valance, 138:58 (Vol. 4)
Woodburning, fish picture frame, 117:80 (Vol. 3)
Wooden pulls, 3:50 (Vol. 1)
Workbench, 37:46; 54:64 (Vol. 2); 91:48 (Vol. 3);
145:82 (Vol. 4)
beefed-up, 163:60 (Vol. 5)
board jack, 37:86 (Vol. 2)
and cabinets, 102:56 (Vol. 3)
drop-leaf mobile, 72:46 (Vol. 2)
flip-top center, Idea Shop 5, 151:52 (Vol. 4)
fold-down, 139:48 (Vol. 4)
low-cost, 163:14 (Vol. 5)
modular group, 4:38 (Vol. 1)
plywood, 194:42 (Vol. 5)
simple, w/ pipe clamp vise, 6:30 (Vol. 1)
tool crib, 109:10 (Vol. 3)
tops, 165:84 (Vol. 5)
Workshop projects from the pros, 162:90 (Vol. 5)
Wrench rack, 51:12 (Vol. 2)
Wrist watch,
turned bezel, 66:52 (Vol. 2)
desk, wall hanging, 90:56 (Vol. 3)
Yard lighting, 114:46 (Vol. 3)
Zero-clearance insert, 108:33 (Vol. 3);
182:28 (Vol. 5)
Shop Tips
Abrasives cleaner, 10:13 (Vol. 1); 44:15 (Vol. 2)
Accurate cutting, 35:22 (Vol. 2)
Adhesives, 3:41 (Vol. 1)
application, 11:16; 16:23; 29:16 (Vol. 1);
42:16; 48:16; 49:14; 52:15;
64:10 (Vol. 2); 104:26 (Vol. 3); 142:28; 153:29; 156:108 (Vol. 4)
blot, 4:10 (Vol. 1)
bottle caps, 32:22 (Vol. 1)
leash, 180:20 (Vol. 5)
brush,
cleaner, 174:24 (Vol. 5)
holder, 194:11 (Vol. 5)
contact cement, 4:16 (Vol. 1)
drips, 26:16 (Vol. 1)
corners, 8:14 (Vol. 1)
dental probes, 17:16 (Vol. 1)
drip catcher, 166:30 (Vol. 5)
epoxy, 23:20 (Vol. 1); 35:21 (Vol. 2)
mixing, 30:16 (Vol. 1)
16
Adhesives, continued,
glue feet, 92:25 (Vol. 3)
glue refills, 94:12 (Vol. 3)
glue syringes, 146:43 (Vol. 4)
glue-up braces, 69:14 (Vol. 2)
guides, 139:31 (Vol. 4)
hide-glue turning, 91:30 (Vol. 3)
laminate, 92:24 (Vol. 3)
mixing, 123:37 (Vol. 4)
plugs, 72:19 (Vol. 2)
precision, 165:27 (Vol. 5)
scrollsawn parts, 110:36 (Vol. 3)
spreading trowel, 169:26 (Vol. 5)
squeeze-out eliminator, 193:13 (Vol. 5)
storage, 11:18 (Vol. 1); 80:26 (Vol. 3);
134:30 (Vol. 4)
string through hole, 76:16 (Vol. 3)
temporary hotmelt glue, 115:33 (Vol. 3)
toothpicks, 8:10 (Vol. 1)
V-grooves, 101:38 (Vol. 3)
Aerosol nozzle cleaner, 181:16 (Vol. 5)
Air filtration, mobile, 163:32 (Vol. 5)
Allen wrench, leverage, 147:31 (Vol. 4)
Apron,
pocket gripper, 187:12 (Vol. 5)
ties, 97:18 (Vol. 3); 149:17 (Vol. 4)
Bandsaw,
blade,
holder, 177:16 (Vol. 5)
installation, 21:18 (Vol. 1);
60:12 (Vol. 2)
guides, 115:26 (Vol. 3)
labels, 194:8 (Vol. 5)
tension indicator, 109:32 (Vol. 3)
welding jig, 115:30 (Vol. 3)
cutline, 187:8 (Vol. 5)
cover knobs, 132:36 (Vol. 4)
extension table, 18:20 (Vol. 1);
41:15 (Vol. 2)
fence, 51:21 (Vol. 2)
for curves, 166:26 (Vol. 5)
quick-release, 193:15 (Vol. 5)
speed square as, 168:18 (Vol. 5)
found wood stock box, 87:18 (Vol. 3)
magnetic guide, 70:12 (Vol. 2)
maintenance, 43:16; 45:24 (Vol. 2)
small parts, 92:23 (Vol. 3)
smooth cuts, 17:16 (Vol. 1)
table, 22:14 (Vol. 1)
turning square jig, 149:19 (Vol. 4)
zero-clearance, 186:12 (Vol. 5)
Belt sander,
dust collection, 163:36 (Vol. 5)
curves, 148:22 (Vol. 4)
safety, pushstick, 188:18 (Vol. 5)
Bench dog, 13:12; 19:18 (Vol. 1); 44:14 (Vol. 2);
157:36; 158:32 (Vol. 4)
Bench hold down, 32:18 (Vol. 1); 34:16 (Vol. 2)
Bench hook, carving, 26:16 (Vol. 1)
Bench planes, storage, 80:22 (Vol. 3)
Benchtop tools,
bolt-on bases, 157:38 (Vol. 4)
interchange, 46:25 (Vol. 2)
motors, 41:12 (Vol. 2)
quick change, 150:22 (Vol. 4)
secure, 75:20 (Vol. 2)
space, 69:21 (Vol. 2)
Benchtop,
bench stop, 57:20 (Vol. 2)
clamping jig, 135:24 (Vol. 4)
Benchtop, continued,
fold-down shelf, 104:25 (Vol. 3)
hole, 45:25 (Vol. 2)
maintenance, 50:20 (Vol. 2)
stop, 71:10 (Vol. 2)
Bench vise,
pads, 169:26 (Vol. 5)
poor-man’s, 195:8 (Vol. 5)
Bevel gauge, 60:22 (Vol. 2)
Bird house, detachable feeder, 149:17 (Vol. 4)
Bit cleaning, 1:27 (Vol. 1)
Biscuit joiner,
base extension, 171:20 (Vol. 5)
spline attachment, 182:17 (Vol. 5)
Biscuits,
face frames, 153:30 (Vol. 4)
face to face, 149:21 (Vol. 4)
jig, 159:96 (Vol. 4)
marking guide, 103:34 (Vol. 3)
rise prevention, 151:24 (Vol. 4)
stud finder, 106:20 (Vol. 3)
T-square, 125:31 (Vol. 4)
Blade-height gauges, 1:23 (Vol. 1)
Board jack, 152:39 (Vol. 4)
Bookends,
bowl leftovers, 73:10 (Vol. 2)
no-slip, 165:24 (Vol. 5)
Bowl,
blank press, 148:29 (Vol. 4);
187:13 (Vol. 5)
finishing without drips, 170:25 (Vol. 5)
Box-joint jig, 143:30 (Vol. 4)
for router table, 183:23 (Vol. 5)
Box latching lid, 113:12 (Vol. 3)
Brads, 10:19 (Vol. 1)
holder, 21:18 (Vol. 1); 162:28 (Vol. 5)
pickup, 7:27 (Vol. 1)
Branding, 96:22 (Vol. 3)
Breadboard end, 160:104 (Vol. 4)
Bugs,
catcher, 174:20 (Vol. 5)
infestations, 20:14 (Vol. 1)
microwave, 22:18 (Vol. 1)
Cabinets,
assembly, 14:14 (Vol. 1)
catch, 11:18 (Vol. 1)
corner bracing, 117:30 (Vol. 3)
design, 55:12 (Vol. 2)
drawers, 60:21 (Vol. 2)
alignment, 158:28 (Vol. 4)
17
Cabinets, continued,
hardware, 108:22 (Vol. 3)
locks, 27:22 (Vol. 1)
rattles, 19:14 (Vol. 1)
slides, 123:34; 137:39;
151:30 (Vol. 4)
stick, 26:26 (Vol. 1)
finishing, 128:40 (Vol. 4)
hidden nailers, 85:16 (Vol. 3)
installation, 33:27 (Vol. 2)
open shelving, 132:39 (Vol. 4)
pivot hinge mortise, 110:36 (Vol. 3)
squaring assembly, 106:25 (Vol. 3)
Calculator, 36:19 (Vol. 2)
Calipers,
clencher, 192:10 (Vol. 5)
gauge, 30:20 (Vol. 1)
holder, 123:36 (Vol. 4)
substitute, 36:16 (Vol. 2); 99:26 (Vol. 3)
Carriage bolt, 38:18 (Vol. 2)
alteration, 45:24 (Vol. 2)
Carving,
blade maintenance, 68:10 (Vol. 2)
clamp, 42:16 (Vol. 2)
knife modification, 44:13 (Vol. 2)
relaxed, 46:22 (Vol. 2)
safety, 50:14 (Vol. 2)
sidelight, 33:20 (Vol. 2)
Casters,
pinstripe, 30:16 (Vol. 1)
slip prevention, 92:27 (Vol. 3)
wooden replacements, 60:10 (Vol. 2)
Caulk, 12:14 (Vol. 1)
application, 114:33 (Vol. 3)
Center finder,
spindles, 184:20; 189:10 (Vol. 5)
circle, 180:14 (Vol. 5)
firewood, 195:14 (Vol. 5)
holes, 193:13 (Vol. 5)
Chairs
legs,
cutting, 137:42 (Vol. 4)
finishing, 139:30 (Vol. 4)
rung replacement, 24:16 (Vol. 1)
Chalk, preventing breaks, 194:15 (Vol. 5)
Chisels,
rack, 190:16 (Vol. 5)
Christmas ornament hooks, 133:29 (Vol. 4)
Chucks,
key, 29:18 (Vol. 1)
18
Chucks, continued,
convenience, 74:26 (Vol. 2)
grip, 45:22 (Vol. 2)
guard, 27:14 (Vol. 1)
handle, 54:18 (Vol. 2)
handle upgrade, 174:24 (Vol. 5)
small diameter stock, 39:20 (Vol. 2)
tightening, 22:14 (Vol. 1)
Circle centering jig, 15:20 (Vol. 1)
Circular saw,
accurate rips, 41:16; 64:10 (Vol. 2)
blade removal, 52:10 (Vol. 2)
clean cuts, 63:14 (Vol. 2)
cut-off jig, 74:26 (Vol. 2); 144:37 (Vol. 4)
straightedge template, 87:22 (Vol. 3)
zero-clearance insert, 188:21 (Vol. 5)
Clamps and Clamping,
adjustable jaw safety, 104:24 (Vol. 3)
acute angles, 154:26 (Vol. 4)
band, 95:15 (Vol. 3); 151:27 (Vol. 4)
with brackets, 90:25 (Vol. 3)
bar, 16:16 (Vol. 1)
for carving, 83:26 (Vol. 3)
for carcase, 113:14 (Vol. 3)
F-style, 155:98 (Vol. 4)
mini-, 170:21 (Vol. 5)
one-handed, 153:29 (Vol. 4)
pad, 165:25 (Vol. 5)
benchtop hold downs, 103:24 (Vol. 3)
block, 104:27 (Vol. 3)
board-stretching, 130:35 (Vol. 4)
bolt-together, 96:19 (Vol. 3)
broomstick collet, 70:13 (Vol. 2)
C-clamps,
for glue up, 136:41 (Vol. 4)
care, 5:76 (Vol. 1)
cargo tie-down, 48:18 (Vol. 2)
caution flags, 30:14 (Vol. 1)
clothespins, 31:14 (Vol. 1); 72:14 (Vol. 2);
89:18 (Vol. 3)
coat hangers as, 128:41 (Vol. 4)
corners, 60:19 (Vol. 2)
blocks, 195:12 (Vol. 5)
brace, 177:13 (Vol. 5)
frame jig, 53:22 (Vol. 2); 125:28
miter jig, 36:14 (Vol. 2)
from spring clamp, 188:23 (Vol. 5)
curved profile blocks, 78:28 (Vol. 3)
deep jobs, 188:20 (Vol. 5)
doormaker’s jig, 140:30 (Vol. 4)
Clamps and Clamping, continued,
drywall screws, 46:25 (Vol. 2)
edge glued stock, 43:18 (Vol. 2)
face frame, 195:15 (Vol. 5)
fence anchor, 92:22 (Vol. 3)
frame, cabinet hinges, 24:18 (Vol. 1)
glue edges, 31:14 (Vol. 1)
grip enhancement, 162:26; 192:17 (Vol. 5)
grips, 158:31 (Vol. 4)
hand-screw, 34:22; 42:18 (Vol. 2)
as vise, 93:16 (Vol. 3)
handle grip, 130:35 (Vol. 4)
hose, 21:16 (Vol. 1)
irregular surfaces, 11:12; 17:16 (Vol. 1)
jumper wire clips, 84:18 (Vol. 3)
lengthening, 162:24 (Vol. 5)
mini frame, 21:16 (Vol. 1)
miter clamp, 1:29; 1:30 (Vol. 1);
110:42 (Vol. 3);
miter base, 67:15 (Vol. 2)
miter box, 15:12 (Vol. 1)
odd shapes, 112:28 (Vol. 3);
131:37 (Vol. 4); 180:20;
186:14 (Vol. 5)
pads, 1:24; 20:16; 23:14 (Vol. 1); 38:18;
70:14 (Vol. 2); 110:44;
114:30 (Vol. 3)
plastic dip pads, 61:14 (Vol. 2)
panel, shopmade, 191:10 (Vol. 5)
pipe clamps, 34:16 (Vol. 2)
double-duty pipe, 185:13 (Vol. 5)
elevated, 40:16 (Vol. 2)
jaw extenders, 111:24 (Vol. 3)
rack, 77:24 (Vol. 3)
rolling, 147:29 (Vol. 4)
vise, 51:20 (Vol. 2); 152:34 (Vol. 4)
plumbing parts, 51:16 (Vol. 2)
pull-straps, 83:22 (Vol. 3)
quick-release, 62:12 (Vol. 2)
Quik-Grip crosscuts, 95:13 (Vol. 3)
timing, 12:16 (Vol. 1)
raised for panels, 121:32 (Vol. 4)
rectangular projects, 37:20 (Vol. 2)
rubber band, 139:32 (Vol. 4);
155:98 (Vol. 4)
scrapwood, 51:20 (Vol. 2)
serrated cauls glue ups, 83:24 (Vol. 3)
sheet-good storage, 63:18 (Vol. 2)
Clamps and Clamping, continued,
shop-made, 89:22 (Vol. 3)
socket tightening, 138:41 (Vol. 4)
speedy threading, 88:28 (Vol. 3)
spool on thin stock, 74:24 (Vol. 2)
strap, 34:18; 42:17 (Vol. 2)
tabletop mounted, 130:28 (Vol. 4)
tapered blocks, 98:20 (Vol. 3)
tightening pin replacement, 128:38 (Vol. 4)
toggle jig, 87:16 (Vol. 3)
to tool tables, 167:34 (Vol. 5)
use rope, 46:24 (Vol. 2)
wide fit, 72:8 (Vol. 2)
workmate extension, 30:14 (Vol. 1)
with cellophane, 166:24 (Vol. 5)
Clock face, 115:32 (Vol. 3)
Clockmaking, 148:27 (Vol. 4)
Combination square, 30:22 (Vol. 1)
Compass, oversized, 186:12 (Vol. 5)
Compressors,
hose reel, 64:12 (Vol. 2)
Cordless drill holders, 173:16 (Vol. 5)
Crosscut sled, sacrificial insert, 180:19 (Vol. 5)
Cut-off caddy, 174:20 (Vol. 5)
Cutting bolts, threads, 25:19 (Vol. 1)
Dadoes, fitting, 38:24 (Vol. 2)
Depth gauge, combination square, 75:18 (Vol. 2)
Detail sander storage, 190:17 (Vol. 5)
Dial-indicator stand, 176:88 (Vol. 5)
Disc sander,
sandpaper removal, 34:16 (Vol. 2)
shield, 174:16 (Vol. 5)
Divide circles into segments, 75:22 (Vol. 2)
Division, 2:26 (Vol. 1)
Dollies, adjustable, 135:28 (Vol. 4)
Door-mounted organizer, 188:21 (Vol. 5)
Door-mounting gauge, 184:21 (Vol. 5)
Dovetail jig
dust collection, 189:8 (Vol. 5)
shifting, 68:10 (Vol. 2)
Dowels, 3:41 (Vol. 1)
assembly, 55:15 (Vol. 2)
bamboo, 139:31 (Vol. 4)
center-finder, 186:17; 192:16 (Vol. 5)
centers, 134:30 (Vol. 4)
cutting, 53:18; 57:25 (Vol. 2);
117:28 (Vol. 3)
drawing straight lines on, 164:24 (Vol. 5)
epoxy, 85:14 (Vol. 3)
fitting, 16:22 (Vol. 1); 37:18 (Vol. 2)
19
Dowels, continued,
flatten one side, 119:28 (Vol. 3);
142:28 (Vol. 4)
gauge, 58:15 (Vol. 2)
grooving, 34:16 (Vol. 2)
holes, 29:14 (Vol. 1)
placement, 32:18 (Vol. 1)
plugs, 19:20; 20:14 (Vol. 1)
resize, 104:24 (Vol. 3)
sizing, 145:38 (Vol. 4)
Downdraft table, tablesaw, 191:6 (Vol. 5)
Drawers,
hanging files, 25:19 (Vol. 1)
mounting helpers, 173:18 (Vol. 5)
Drawing,
center, 28:18 (Vol. 1)
center of circle, 132:40 (Vol. 4)
circles, 153:28 (Vol. 4)
large, 33:24 (Vol. 2)
curves, 33:22 (Vol. 2)
diagonals, 108:27 (Vol. 3)
equal space holes on disc, 44:13 (Vol. 2)
lines around corners, 44:12 (Vol. 2)
parallel lines, 18:24 (Vol. 1)
Drilling,
balls, jig for, 173:21 (Vol. 5)
battery, 25:16 (Vol. 1)
bulls-eye level, 142:27 (Vol. 4)
centering,
of dowels, 31:14 (Vol. 1);
46:26 (Vol. 2); 103:27;
117:32 (Vol. 3); 123:32;
137:38; 142:27 (Vol. 4)
hole, 26:20 (Vol. 1)
over hole, 26:18 (Vol. 1);
46:20 (Vol. 2)
clean holes, 151:26 (Vol. 4)
counterbore existing hole, 112:28 (Vol. 3)
cylinder, 163:32 (Vol. 5)
depth accuracy, 104:25 (Vol. 3)
depth stop, 1:24 (Vol. 1); 124:32 (Vol. 4)
dowel lever, 114:28 (Vol. 3)
evenly spaced holes, 118:40 (Vol. 3);
158:33 (Vol. 4)
guide, 87:20 (Vol. 3)
highlight diameters, 124:37 (Vol. 4)
keyhole hanging slot, 68:14 (Vol. 2)
level, 14:14 (Vol. 1)
long stock, 122:41 (Vol. 4)
mating holes, 135:30 (Vol. 4)
mirror for true holes, 177:13 (Vol. 5)
overhead, 17:19 (Vol. 1)
20
Drilling, continued,
perpendicular holes, 42:16 (Vol. 2);
117:38 (Vol. 3)
round stock, 4:11 (Vol. 1)
spheres, 61:10 (Vol. 2)
stop collar damage, 146:40 (Vol. 4)
vertical holes, 92:26 (Vol. 3)
Drill bit,
case markings, 189:12 (Vol. 5)
collar placement, 166:24 (Vol. 5)
Forstner bits, 12:14 (Vol. 1); 33:25 (Vol. 2)
holder and gauge, 185:8 (Vol. 5)
life-extension, 177:12 (Vol. 5)
nails, 46:20 (Vol. 2)
pocket hole bit, 103:26 (Vol. 3)
reference, 41:17 (Vol. 2)
small bit, 26:29 (Vol. 1); 60:16 (Vol. 2)
spade bit, 8:16; 21:16 (Vol. 1);
55:16 (Vol. 2); 90:18 (Vol. 3);
123:36 (Vol. 4)
depth gauge, 60:14 (Vol. 2)
for candles, 25:16 (Vol. 1)
speed reference, 176:82 (Vol. 5)
straightening, 3:34 (Vol. 1)
wandering bits, 69:22 (Vol. 2)
Drill press,
auxiliary table, 140:26 (Vol. 4)
base, 64:10 (Vol. 2)
buffing, 40:14 (Vol. 2); 105:24 (Vol. 3)
chuck-key leash, 170:21 (Vol. 5)
chuck, easy-change, 186:14;
192:14 (Vol. 5)
circle cutter, 42:18; 42:17 (Vol. 2);
145:32 (Vol. 4)
safety, 102:26 (Vol. 3)
cookie sheet reference chart,
178:17 (Vol. 5)
countersink in channel, 127:39 (Vol. 4)
coupling nuts, 97:14 (Vol. 3)
crank handle, 192:17 (Vol. 5)
extender, 188:18 (Vol. 5)
cutting corners, 141:38 (Vol. 4)
door hinge stop, 113:10 (Vol. 3)
drill gauge, 155:96 (Vol. 4)
even spacing, 51:19 (Vol. 2)
fence, 137:39 (Vol. 4)
from plunge router, 181:16 (Vol. 5)
hand screw, 125:34; 122:42 (Vol. 4)
hold-downs, 36:19 (Vol. 2)
hole finding jig, 133:31 (Vol. 4)
Drill press, continued,
hole spacing, 154:30 (Vol. 4)
metal shavings, 85:8 (Vol. 3)
repetitive hole sets, 122:40 (Vol. 4)
safety switch, 43:19 (Vol. 2)
squaring table, 26:22 (Vol. 1)
table, 40:14 (Vol. 2)
centering gauge, 189:11 (Vol. 5)
quick-change, 176:80 (Vol. 5)
simple, 177:15 (Vol. 5)
tensioning, 157:32 (Vol. 4)
tilt-angle scale mirror, 71:13 (Vol. 2)
Drum sander,
adapter, 194:10 (Vol. 5)
adjustable, 144:30 (Vol. 4)
Drum sanding thin strips, 178:14 (Vol. 5)
Ductwork, mounting, 153:33 (Vol. 4)
Duplicating pieces, 2:26 (Vol. 1)
irregular shapes, jig, 39:20 (Vol. 2)
Dust collection, 5:74; 22:12; 26:20 (Vol. 1);
34:21 (Vol. 2)
adapter, 46:24 (Vol. 2)
belt-drive saws, 73:6 (Vol. 2)
belt sander, 36:14; 38:21 (Vol. 2)
blast gates, 60:10 (Vol. 2); 89:24 (Vol. 3);
132:30; 159:98 (Vol. 4)
box protector, 64:16 (Vol. 2)
carpet tubing, 130:28 (Vol. 4)
chip separator, 77:22 (Vol. 3);
152:36 (Vol. 4)
collector bag seal, 146:36 (Vol. 4)
collector window, 116:36 (Vol. 3)
drill press, 111:29 (Vol. 3); 134:29;
144:36; 148:24 (Vol. 4)
downsize PVC, 181:10 (Vol. 5)
duct supports, 172:26 (Vol. 5)
dust hood, 141:37 (Vol. 4)
fan, 29:20 (Vol. 1)
motors, 29:14 (Vol. 1)
filters,
cheap, 180:22 (Vol. 5)
fine, 126:28 (Vol. 4)
holesawing, 100:24 (Vol. 3)
hose changes, 49:12 (Vol. 2)
magnetic switch, 120:26 (Vol. 3)
mitersaws, 149:16 (Vol. 4)
noise control, 101:32 (Vol. 3)
pipe coupler, 108:26 (Vol. 3)
remote switch, 43:14 (Vol. 2)
router, 43:21 (Vol. 2); 156:106 (Vol. 4)
router table, 178:14 (Vol. 5)
Dust collection, continued,
RV hose fittings, 100:16 (Vol. 3)
scrollsaw, 53:24; 59:10; 59:12 (Vol. 2)
shaper, 111:31 (Vol. 3)
tablesaw, 87:12; 106:20 (Vol. 3)
timer, 106:26 (Vol. 3)
vacuum, 65:12 (Vol. 2)
bag, 90:18 (Vol. 3)
exhaust, 99:18 (Vol. 3)
hose, 87:23; 108:20 (Vol. 3)
piping, 50:18 (Vol. 2)
screws, 69:14 (Vol. 2)
skids, 80:22 (Vol. 3)
wands, 89:20 (Vol. 3)
wheels, 99:26 (Vol. 3)
weatherstripping, 167:34 (Vol. 5)
Dust, compressed air, 160:103 (Vol. 4)
Dustpan, 185:10 (Vol. 5)
Edge banding,
tablesaw cleanup, 119:31 (Vol. 3)
without vice, 146:43 (Vol. 4)
Extension cord
manager, 169:28 (Vol. 5)
Fasteners,
brads, 72:8 (Vol. 2); 154:31 (Vol. 4)
glue screws, 37:16 (Vol. 2)
lubricant, wood screws, 10:13 (Vol. 1)
in particleboard, 144:34 (Vol. 4)
rusted screws, 36:20 (Vol. 2)
stripped screws, 13:12 (Vol. 1)
tweezers, 18:20 (Vol. 1)
Featherboard (Vol. 5)
magnetic, 167:32 (Vol. 5)
setup gauge, 172:20 (Vol. 5)
tandem, 163:30 (Vol. 5)
technique, 193:14 (Vol. 5)
Finishing,
application, 3:38; 11:12; 11:12; 13:15; 15:21 (Vol. 1); 35:16; 38:28; 51:18;
72:10; 72:16 (Vol. 2); 82:13; 85:17;
116:40 (Vol. 3); 149:22;
160:103 (Vol. 4)
defects, 30:22 (Vol. 1)
drying, 114:30; 118:38 (Vol. 3);
134:28 (Vol. 4)
HVLP sprayer, 125:33 (Vol. 4)
inside, 32:24 (Vol. 1)
jig, 3:36 (Vol. 1)
lazy susan, 26:22 (Vol. 1)
liquid stripping, 137:37 (Vol. 4)
21
Finishing, continued,
molding, 140:29 (Vol. 4)
paint,
aerosol, 16:22; 20:14 (Vol. 1)
brush,
cleaning, 7:27 (Vol. 1)
holder, 16:16 (Vol. 1)
maintenance, 3:42; 9:20;
16:16;
29:18 (Vol. 1);
43:18 (Vol. 2);
91:34 (Vol. 3)
renewable, 56:22 (Vol. 2)
reusing handles,
23:14 (Vol. 1)
can cover, 74:26 (Vol. 2);
119:34 (Vol. 3)
clean pouring, 62:17 (Vol. 2)
cleanliness, 65:8 (Vol. 2);
87:16; 102:24 (Vol. 3)
dip cup, 146:39 (Vol. 4)
drying, 8:14 (Vol. 1)
pattern, 157:37 (Vol. 4)
recycling thinner, 4:11 (Vol. 1)
rollers, 18:20 (Vol. 1)
preserver, 188:23 (Vol. 5)
tray, custom, 177:12 (Vol. 5)
small parts, 43:16 (Vol. 2);
89:18 (Vol. 3)
spray nozzles, 6:12 (Vol. 1)
sprayer, 43:16 (Vol. 2)
storage, 4:12; 20:18 (Vol. 1)
portable rack, 141:37 (Vol. 4)
protector, 1:24 (Vol. 1)
razor and putty, 28:18 (Vol. 1)
reference reminder, 174:16 (Vol. 5)
Refinishing, wooden scraper,
70:13 (Vol. 2)
shelves, 116:34 (Vol. 3); 138:36 (Vol. 4)
small parts, 28:14 (Vol. 1); 41:12 (Vol. 2); 110:41 (Vol. 3); 174:26 (Vol. 5)
spray-booth, portable, 195:11 (Vol. 5)
spray can cap, 61:10 (Vol. 2)
stain,
detail, 111:28 (Vol. 3)
jig, 100:16 (Vol. 3)
matching, 7:22 (Vol. 1)
stand, rotating, 191:6 (Vol. 5)
steel wool removal, 150:20 (Vol. 4)
storage, 1:29; 13:12 (Vol. 1);
45:25 (Vol. 2); 125:28; 138:40;
22
Finishing, continued,
155:98 (Vol. 4);
stripping, 4:16 (Vol. 1)
Flat surfaces, 102:24 (Vol. 3)
Fluting jig, 192:8 (Vol. 5)
Frames,
clamping helper, 161:33 (Vol. 5)
pocket holes, 117:28 (Vol. 3)
Framing, twists, 5:78 (Vol. 1)
Furniture,
disassembly, 6:12; 9:24 (Vol. 1)
gliders, 5:80 (Vol. 1)
leveling, 15:19 (Vol. 1)
restoration, 38:22 (Vol. 2); 88:22 (Vol. 3)
temporary sliders, 50:16 (Vol. 2)
Glass,
clean break, 149:21 (Vol. 4)
straight, 182:17 (Vol. 5)
installation, 127:34 (Vol. 4)
Glue-joint breaking, 190:17 (Vol. 5)
Grommets, solid wood, 155:97 (Vol. 4)
Ground-fault outlet box, 166:28 (Vol. 5)
Grinder, 12:14 (Vol. 1)
space, 18:20 (Vol. 1)
stationary, 85:10 (Vol. 3)
Hammer, marring, 15:21; 16:22 (Vol. 1);
144:35 (Vol. 4)
Hand crank, power lift, 157:37 (Vol. 4)
Handles,
Allen wrench, 66:10 (Vol. 2)
for arthritis, 61:13 (Vol. 2)
comfort, 46:22 (Vol. 2)
knobs, 50:14 (Vol. 2)
bent bolt, 58:14 (Vol. 2)
wooden, 73:8 (Vol. 2)
Handscrews, 32:24 (Vol. 1)
inner tubes, 24:16 (Vol. 1)
Hanger bolts, install, 33:25 (Vol. 2)
Hanging heavy projects, 139:33 (Vol. 4)
Hanging hooks, 143:28 (Vol. 4)
Hanging, keyhole slots, 144:32 (Vol. 4)
Hardware,
dustpan magnet, 103:34 (Vol. 3)
hinges,
barrel, 139:30 (Vol. 4)
countersink, 112:38 (Vol. 3)
exposure gauge, 195:15 (Vol. 5)
finishing nail, 85:8 (Vol. 3)
inset, 147:26 (Vol. 4)
installation, 7:22; 12:14 (Vol. 1);
Hardware, continued,
39:25 (Vol. 2);
115:26 (Vol. 3)
maintenance, 46:23; 65:6 (Vol. 2)
mortise routing trick,
189:14 (Vol. 5)
positioning, hot-melt glue,
180:18 (Vol. 5)
repair, 14:17 (Vol. 1)
reshaping inexpensive,
178:16 (Vol. 5)
knobs, 9:22 (Vol. 1)
screw eyes, 11:16 (Vol. 1)
screws,
brass and steel, 48:16 (Vol. 2)
broken, 19:14 (Vol. 1)
countersink, 55:12 (Vol. 2)
masonry, 57:20 (Vol. 2)
plug pulling, 147:28 (Vol. 4)
removing frozen, 115:35 (Vol. 3)
slot, 20:23 (Vol. 1); 44:10 (Vol. 2)
setting with nail polish,
148:31 (Vol. 4)
small installation, 147:30;
149:25 (Vol. 4)
starter hole, 165:25 (Vol. 5)
storage,
in-drawer, 192:10 (Vol. 5)
sturdy, 179:14 (Vol. 5)
Hold-downs, 107:20 (Vol. 3)
spring-enhanced, 194:15 (Vol. 5)
Hole plugs, tapered, 76:20 (Vol. 3)
Holesaw,
grabber, 88:24 (Vol. 3)
plug removal, 132:39 (Vol. 4)
sawdust escape, 99:20 (Vol. 3)
Honing-guide gauge, 184:16 (Vol. 5)
Hook installation, spacing, 43:20 (Vol. 2)
Hook rule, 150:23 (Vol. 4)
HVLP, isolated turbine, 176:80 (Vol. 5)
Intarsia, grain choice, 127:40 (Vol. 4)
Jewelry box modification, 190:16 (Vol. 5)
Jigsaw,
inside cuts, 8:16 (Vol. 1)
T blocks, 34:21 (Vol. 2)
Joints and Joinery,
broken pieces, 20:14 (Vol. 1)
fitting, 9:20 (Vol. 1); 38:26 (Vol. 2)
tenons for tapered legs, 121:34 (Vol. 4)
wedge for rough joints, 142:28 (Vol. 4)
Jointer,
Jointer, continued,
block plane, 125:30 (Vol. 4)
J-channel for long stock, 116:29 (Vol. 3)
mobile base, 134:32 (Vol. 4)
pushpad shelf, 148:27 (Vol. 4)
Keyhole hangers, easy-mortise, 167:30 (Vol. 5)
Keyhole slots,
dowel centers, 94:12 (Vol. 3)
jig, 112:26 (Vol. 3); 121:35 (Vol. 4)
Label removal, 21:18 (Vol. 1); 100:22 (Vol. 3)
Laminations,
bending, 16:23 (Vol. 1)
Lamp, adjustable, 30:14 (Vol. 1); 56:20 (Vol. 2)
Layout on curved pieces, 169:27 (Vol. 5)
Leveling feet, 136:40 (Vol. 4)
Light,
magnetic task, 175:30 (Vol. 5)
telescoping track, 177:10 (Vol. 5)
Lighting, motion detector, 98:18 (Vol. 3)
Lock alignment, lipstick, 72:14 (Vol. 2)
Lumber,
rack, 87:14 (Vol. 3)
convenient, 168:18 (Vol. 5)
dolly, 161:30 (Vol. 5)\
transportation in car, 57:16 (Vol. 2)
Magnetic picker-upper, 179:15 (Vol. 5)
Marking gauge, 1:30 (Vol. 1)
Materials handling,
bundling, 82:10 (Vol. 3)
Matching stock patch, 156:107 (Vol. 4)
Measuring,
board feet, 138:38 (Vol. 4)
mistakes, avoiding, 189:12 (Vol. 5)
odd shaped pieces, 104:28 (Vol. 3)
proportional scale, 68:16 (Vol. 2)
small objects, 26:16 (Vol. 1)
Mission furniture, slat installation, 150:24 (Vol. 4)
Miter bar, adjustable, 148:24 (Vol. 4)
Miter box, fence, 10:14 (Vol. 1)
Mitered corners, 38:18 (Vol. 2)
Miter jig for wide stock, 184:14 (Vol. 5)
Miter mistake fix, 185:12 (Vol. 5)
Mitersaw,
angle gauge, 153:32 (Vol. 4)
auxiliary fence, 127:36; 128:42 (Vol. 4)
base, swiveling, 170:24 (Vol. 5)
benchtop extension, 130:30 (Vol. 4)
crosscutting small parts, 129:38 (Vol. 4)
dust-hood mounting, 174:18 (Vol. 5)
framing square, 52:16 (Vol. 2)
23
Mitersaw, continued,
hold-down, 191:9 (Vol. 5)
multiple-pass, 69:16 (Vol. 2)
support blocks, 119:28 (Vol. 3)
Mobile base (Vol. 5)
adjustment extension, 169:24 (Vol. 5)
pivoting casters, 164:22 (Vol. 5)
Molding,
bead w/o router, 145:36 (Vol. 4)
crown, 111:26 (Vol. 3)
miter cut, 154:32 (Vol. 4)
Mortiser base upgrade, 171:24 (Vol. 5)
Mortises
bit lubricant, 148:30 (Vol. 4)
centering, 165:26 (Vol. 5)
doweling jig, 101:40 (Vol. 3)
jig, self-centering, 185:10 (Vol. 5)
multiple, 71:10 (Vol. 2)
predrill, 148:22 (Vol. 4)
setup technique, 195:10 (Vol. 5)
Motor mount, 61:13 (Vol. 2)
Nailing gauge, 177:15 (Vol. 5)
Nails,
hiding, 5:78 (Vol. 1); 39:20 (Vol. 2);
127:36 (Vol. 4)
removal, 14:14; 25:18 (Vol. 1);
90:24 (Vol. 3)
splits, 3:36 (Vol. 1)
starting, 6:12; 21:18; 32:22 (Vol. 1);
146:41 (Vol. 4)
Onlay from edge-banding, 162:26 (Vol. 5)
Opening canisters, 74:30 (Vol. 2)
Organization,
boards, 89:20 (Vol. 3)
clamps, 120:29 (Vol. 3)
shop cleanliness,
calculator, 159:97 (Vol. 4)
lathe shavings, 156:106 (Vol. 4)
rake, 95:15 (Vol. 3)
dowels, 59:14 (Vol. 2); 110:41 (Vol. 3)
drop box, 68:14 (Vol. 2)
fasteners, 115:34 (Vol. 3); 133:34 (Vol. 4)
files, 140:29 (Vol. 4)
jig reference label, 159:98 (Vol. 4)
kneeling pad, 99:28 (Vol. 3)
lathe chisels, 112:30 (Vol. 3);
132:32 (Vol. 4)
materials list, 160:104 (Vol. 4)
mobile bases, 58:12 (Vol. 2)
24
Organization, continued,
outlets, 64:13 (Vol. 2)
nuts and bolts, 107:22 (Vol. 3)
pencils, 139:34 (Vol. 4)
perf-board, 131:37 (Vol. 4)
power cords, 58:12; 70:10 (Vol. 2)
recorder, 57:23 (Vol. 2)
record keeping, 137:32 (Vol. 4)
sanding discs, 116:34 (Vol. 3)
sanding pads, 78:26 (Vol. 3)
sanding sleeves, 134:26 (Vol. 4)
sandpaper, 57:23; 67:10 (Vol. 2)
scrollsaw blades, 114:26 (Vol. 3);
124:34 (Vol. 4)
shop papers, 63:20 (Vol. 2)
sign out board, 99:16 (Vol. 3)
tools, 116:29 (Vol. 3)
Outfeed,
roller, sawhorse, 164:25 (Vol. 5)
support, adjustable, 162:28 (Vol. 5)
table, pivoting, 156:109 (Vol. 4)
Panels,
beveled, 131:38 (Vol. 4)
door jig, 139:34 (Vol. 4)
double your stock, 103:33 (Vol. 3)
jig, 69:14 (Vol. 2)
Patterns and Plans,
adhesive, 191:8 (Vol. 5)
cutting, 38:26; 68:18 (Vol. 2)
durable, 165:26 (Vol. 5)
enlargement, 56:16 (Vol. 2)
gridded reference, 83:28 (Vol. 3)
holder, 195:13 (Vol. 5)
retractable, 187:10 (Vol. 5)
photocopy, 37:20 (Vol. 2)
post it glue, 100:28 (Vol. 3)
preservation, 189:11 (Vol. 5)
rescaling, 28:14 (Vol. 1)
reverse, 38:21 (Vol. 2)
stencil brush, 50:20 (Vol. 2)
taping, 124:32 (Vol. 4)
templates, 18:22; 31:14 (Vol. 1);
55:17 (Vol. 2); 82:12;
119:34 (Vol. 3)
tracing, 11:18; 22:16; 23:18 (Vol. 1)
tracing shadow, 100:26 (Vol. 3)
transferring, 8:10 (Vol. 1) ; 33:20 (Vol. 2);
99:16 (Vol. 3); 121:26;
127:38 (Vol. 4)
mirroring, 10:14 (Vol. 1)
Pen blanks,
assembly with riveter, 154:28 (Vol. 4)
squaring, 146:41 (Vol. 4)
Pencil lanyard, breakaway, 179:13 (Vol. 5)
Pencil lines, removal, 82:16 (Vol. 3)
Phone, indicator, 160:105 (Vol. 4)
Picture frame, 34:22; 39:23; 67:12 (Vol. 2)
assembly, 114:26 (Vol. 3); 135:26; 139:32;
145:36 (Vol. 4)
Picture hanging, 85:16 (Vol. 3); 124:36;
153:33 (Vol. 4)
miter jig, 182:14; 194:8 (Vol. 5)
Pin router, drill press table, 121:24 (Vol. 4)
Planers and planing, 14:16 (Vol. 1)
accurate gauge, 134:32 (Vol. 4)
beveling, 66:10 (Vol. 2)
cutterhead creep, 123:30; 134:28 (Vol. 4)
dull knives, 62:12 (Vol. 2)
dust collection fix, 176:84 (Vol. 5)
extension tables, 41:14 (Vol. 2)
gauge block, 166:22 (Vol. 5)
knife jig, 112:34 (Vol. 3)
low spots, 5:82 (Vol. 1)
uniform width, 106:24 (Vol. 3)
Plane sole plate protector, 194:13 (Vol. 5)
Plate Jointer, gauges, 36:14 (Vol. 2)
Plugs,
cutter, 84:18; 117:39 (Vol. 3)
jig, 147:31 (Vol. 4)
matching pinheads, 118:41 (Vol. 3)
sanding disc shim, 149:22 (Vol. 4)
end grain joinery, 60:21 (Vol. 2)
organization, 155:97 (Vol. 4)
tweezers, 48:20 (Vol. 2)
Plywood,
hide edges, 31:18 (Vol. 1)
patch, 7:24; 26:24 (Vol. 1)
resaw, 136:40 (Vol. 4)
Pneumatic nailer, avoiding blowout, 191:11 (Vol.
5)
Pocket holes,
bit gauge, 161:32 (Vol. 5)
jig,
forstner bit, 81:14 (Vol. 3)
router, 113:12 (Vol. 3)
Post caps, 129:34 (Vol. 4)
Power cord, 4:10; 10:17 (Vol. 1)
ease of use, 51:23 (Vol. 2); 136:43 (Vol. 4)
elastic hair tie, 100:22 (Vol. 3)
office supplies, 159:97 (Vol. 4)
Power cord, continued,
sweatband, 121:31 (Vol. 4)
Power tools, holster, 26:26 (Vol. 1)
Pushblocks, 131:31; 142:22; 157:32 (Vol. 4)
non-slip pad, 180:18 (Vol. 5)
rail-riding, 169:22 (Vol. 5)
Pushstick,
non-slip, 183:20 (Vol. 5)
Putty,
samples, 48:18 (Vol. 2)
Radial arm saw, 15:12 (Vol. 1)
adjustment, 40:20 (Vol. 2)
binding, 26:29 (Vol. 1)
extendable stop, 42:17 (Vol. 2)
fence, 35:19 (Vol. 2)
hold downs, 91:28 (Vol. 3)
kerf, 98:20 (Vol. 3); 152:35; 153:31 (Vol. 4)
particleboard, 51:18 (Vol. 2)
ripping, 43:14; 56:18 (Vol. 2)
safe stop, 179:12 (Vol. 5)
safety guard, 91:33 (Vol. 3);
143:32 (Vol. 4)
smooth rips, 38:26 (Vol. 2)
stop block, 13:16 (Vol. 1); 87:16 (Vol. 3)
table, self-cleaning, 173:22 (Vol. 5)
tenon dado joints, 132:31 (Vol. 4)
Reindeer cutout, weighing down, 156:104 (Vol. 4)
Remote control mirror, 186:15 (Vol. 5)
Repairs,
chair spindles, 44:14 (Vol. 2)
dents, 41:15 (Vol. 2)
raising, 3:34 (Vol. 1)
torn grain, 3:36 (Vol. 1)
Replacement parts, 60:16 (Vol. 2)
Right-angle driver, 185:13 (Vol. 5)
Roller stand, 126:30; 130:38 (Vol. 4)
brake, 169:28 (Vol. 5)
Round stock, parallel lines, 16:16 (Vol. 1)
Round tenons on tablesaw, 184:21 (Vol. 5)
Router,
auxiliary top, 100:18; 120:30 (Vol. 3)
base hole layout, 154:31 (Vol. 4)
bit preservation, 132:32 (Vol. 4)
bit profile, 30:20 (Vol. 1)
bit speed guide, 164:25 (Vol. 5)
bit storage, 78:24 (Vol. 3)
burn elimination, 194:13 (Vol. 5)
circle cutting, 65:6; 75:16 (Vol. 2)
cleaning collet, 33:27 (Vol. 2)
25
Router, continued,
collet, 48:16; 65:14 (Vol. 2)
tightening, 77:26 (Vol. 3);
136:43 (Vol. 4)
color-coded jigs/tools, 148:29 (Vol. 4)
crown molding, 128:40 (Vol. 4)
dado, 66:14 (Vol. 2); 136:42 (Vol. 4)
depth gauge, 38:20 (Vol. 2)
dovetail jig, 158:32 (Vol. 4)
drill bit measurements, 80:24 (Vol. 3)
dust shield, 150:25 (Vol. 4)
fence, 59:10 (Vol. 2)
fence setting gauge, 27:19 (Vol. 1)
fence micro-adjuster, 172:20;
183:24 (Vol. 5)
filter, 50:16 (Vol. 2)
flush trimming, 151:24 (Vol. 4)
guard, 37:16 (Vol. 2)
guide bushing, 83:22 (Vol. 3);
123:30 (Vol. 4)
height locking knob, 127:34 (Vol. 4)
holder jig, 124:36 (Vol. 4)
hole enlargement, 149:24 (Vol. 4)
insert levelers, 175:35 (Vol. 5)
inside edges, 49:12 (Vol. 2)
label wrench direction, 25:20 (Vol. 1)
large holes, 38:20 (Vol. 2)
locking nut loosener, 48:22 (Vol. 2)
long workpieces, 95:12 (Vol. 3)
mat, 84:16 (Vol. 3)
micro-adjustments, 191:9 (Vol. 5)
molding jig, 105:20 (Vol. 3)
multiple-pass, 69:19 (Vol. 2)
narrow moldings, 94:14 (Vol. 3)
non slip mat, 64:17 (Vol. 2)
parallel slots, 148:31 (Vol. 4)
pad storage, 116:30 (Vol. 3)
pattern tearout, 146:36 (Vol. 4)
plunge depth, 129:38 (Vol. 4)
plunge exact depths, 25:16 (Vol. 1)
plywood edging, 114:29 (Vol. 3)
precise elevation, 76:16 (Vol. 3)
rail-and-stile gauge blocks, 152:35;
153:31 (Vol. 4)
raised panel, 84:14 (Vol. 3);
150:25 (Vol. 4)
scrapwood shapes, 71:12 (Vol. 2)
small piece jig, 154:26 (Vol. 4)
stabilizer, 187:12 (Vol. 5)
subbase, dual-purpose, 170:24 (Vol. 5)
surface planing, 53:20 (Vol. 2)
26
Router, continued,
table
fence extender, 178:18 (Vol. 5)
joint jig, 52:10 (Vol. 2)
pneumatic assist, 168:20 (Vol. 5)
stowaway, 173:23 (Vol. 5)
tablesaw mount, 46:20 (Vol. 2)
table jig, 141:36 (Vol. 4)
table mounted, 51:16 (Vol. 2)
hold down, 51:21 (Vol. 2)
long stock, 60:12 (Vol. 2)
tearout reduction, 130:36 (Vol. 4)
template for notches, 78:22 (Vol. 3)
template for setup, 93:17 (Vol. 3)
wing-mounted enclosure, 184:18 (Vol. 5)
Router plane, shopmade, 177:16 (Vol. 5)
Rust, prevention, 20:18 (Vol. 1); 139:33;
158:33 (Vol. 4)
silica, 151:22 (Vol. 4)
Sabersaw,
filing, 70:14 (Vol. 2)
insulation support, 50:19 (Vol. 2)
Safety, 12:16 (Vol. 1)
blades, 14:14; 15:20 (Vol. 1)
circle cutter, 36:22 (Vol. 2)
children, 18:24 (Vol. 1)
cord lock, 151:22 (Vol. 4)
equipment location, 54:15 (Vol. 2)
face shield, 28:16 (Vol. 1)
glass cleaner, 109:24 (Vol. 3)
glasses storage, 173:21 (Vol. 5)
gloves, 14:19 (Vol. 1)
loose blade, 54:12 (Vol. 2)
noise, 15:12 (Vol. 1)
outlet timer, 121:28 (Vol. 4)
paper mask, 67:12 (Vol. 2)
phone call visitor warnings, 64:14 (Vol. 2)
pipe clamp ends, 101:32 (Vol. 3)
power cord, 12:16 (Vol. 1)
push block, 40:18 (Vol. 2)
rotary shaft 99:20 (Vol. 3)
sharp corners, 28:14 (Vol. 1)
shutoff switch, 143:32 (Vol. 4)
smoke alarms, 126:30 (Vol. 4)
splinter removal, 184:20 (Vol. 5)
switch lock, 146:40 (Vol. 4)
twist-lock plugs, 75:18 (Vol. 2)
Sanders and Sanding, 2:25 (Vol. 1)
any shape, 38:20; 70:17 (Vol. 2)
belt/disc shield, 157:30 (Vol. 4)
belt, large projects, 146:39 (Vol. 4)
Sanders and Sanding, continued,
belt sander to edge sander, 74:24 (Vol. 2)
belts, 58:12 (Vol. 2)
belts for drums, 80:28 (Vol. 3)
blocks, 4:11; 7:24; 12:16;
17:19 (Vol. 1); 40:18 (Vol. 2)
bowls, 26:24 (Vol. 1); 36:16 (Vol. 2)
center, 143:34 (Vol. 4)
clipboards, 68:16 (Vol. 2)
concave surface, 31:22 (Vol. 1)
cordless detail sander, 82:10 (Vol. 3)
credit card, 154:33 (Vol. 4)
curves on edges, 117:37 (Vol. 3)
curves on spindle sander, 114:35 (Vol. 3)
custom blocks, 101:39 (Vol. 3)
delicate parts, 191:8 (Vol. 5)
detail discs, 116:31 (Vol. 3)
discs, 36:22 (Vol. 2)
disc sander adjustment, 155:96 (Vol. 4)
drum, 25:20 (Vol. 1)
clamps, 97:16 (Vol. 3)
cornstarch, 48:21 (Vol. 2)
key, 86:26 (Vol. 3)
lathe-mounted, 178:17 (Vol. 5)
sander, 23:14 (Vol. 1)
sheet, 86:24; 108:24 (Vol. 3)
sleeves, 158:28 (Vol. 4)
electric drill to belt sander, 133:32 (Vol. 4)
face cut, 85:12 (Vol. 3)
finish sander extension, 102:28 (Vol. 3)
flip spindles, 100:26 (Vol. 3)
gouges, 4:11 (Vol. 1)
grit number, 147:22 (Vol. 4)
grooves, 23:16 (Vol. 1)
hinge use, 155:94 (Vol. 4)
hook and loop discs, 105:28 (Vol. 3)
inside of a circle, 176:86 (Vol. 5)
large parts, 18:22 (Vol. 1)
micro-sander, 111:30 (Vol. 3)
molding miters, 101:35 (Vol. 3)
odd shaped pieces, 134:29;
135:30 (Vol. 4)
perfect circles, 35:16 (Vol. 2)
PSA pads, 115:30 (Vol. 3)
random-orbit sander,
pad, 162:24 (Vol. 5)
stand, 184:18 (Vol. 5)
right-angle block, 88:20 (Vol. 3)
sander valet, 137:40 (Vol. 4)
Sanders and Sanding, continued,
sandpaper, 2:26; 13:16 (Vol. 1)
cutter, 176:82 (Vol. 5)
sheets, 56:23 (Vol. 2)
sorter, 175:32 (Vol. 5)
sleeve, 13:12 (Vol. 1)
slots, 5:82 (Vol. 1)
small parts, 8:16; 14:17; 15:12; 23:20; 30:14 (Vol. 1); 88:29 (Vol. 3);
123:35; 151:27 (Vol. 4)
small turnings, 128:38 (Vol. 4)
spindle, 137:34 (Vol. 4)
spray adhesive, 136:42 (Vol. 4)
stuck spindle sleeves, 107:24 (Vol. 3)
table stop, 171:23 (Vol. 5)
veneer, 9:22 (Vol. 1)
wheels, 11:16 (Vol. 1)
wooden buttons, 57:16 (Vol. 2)
Saw blades,
binding, 35:18 (Vol. 2)
cleaning, 13:15 (Vol. 1); 96:16 (Vol. 3)
paper clip grip, 61:10 (Vol. 2)
reinforced, 44:15 (Vol. 2)
saber, 3:36 (Vol. 1)
spacer, 84:22 (Vol. 3)
spray glue, 66:12 (Vol. 2)
storage, 19:14 (Vol. 1); 57:18 (Vol. 2)
super fine, 48:21 (Vol. 2)
Sawdust buildup, 1:29; 17:16 (Vol. 1)
Sawhorses, 7:22; 29:18 (Vol. 1)
pipe insulation, 66:12 (Vol. 2);
79:22 (Vol. 3)
Sawing, wood ball, 39:27 (Vol. 2)
Scrapers
hobby knife, 128:44 (Vol. 4)
knife blade, 110:38 (Vol. 3)
Scraping, 11:12 (Vol. 1)
Screw hole buttons, chamfer, 99:18 (Vol. 3)
Screwdrivers,
grinding compound, 71:14 (Vol. 2)
Phillips, 48:20 (Vol. 2)
ratchet, 35:19 (Vol. 2)
repair, 5:80 (Vol. 1)
Torx, repair, 163:36 (Vol. 5)
Scrollsaw,
backward blade, 122:41 (Vol. 4)
blade holder, 188:20; 190:14 (Vol. 5)
blade holder leash, 45:27 (Vol. 2)
blade maintenance, 26:16 (Vol. 1)
blades,
changes, 96:16 (Vol. 3);
27
Scrollsaw, continued,
125:30 (Vol. 4);
133:29 (Vol. 4)
life, 96:19 (Vol. 3)
storage, 80:26; 90:21 (Vol. 3)
illumination, 90:28 (Vol. 3)
smoother cuts, 81:16 (Vol. 3)
swivel chair fatigue, 78:24 (Vol. 3)
zero clearance insert,
89:26 (Vol. 3)
grip, 136:42 (Vol. 4)
hold-down, 132:37 (Vol. 4)
jig, 35:18 (Vol. 2)
loose blade pins, 41:12 (Vol. 2)
multiple copies, 56:20 (Vol. 2)
sanding, 43:20 (Vol. 2)
small parts, 35:21; 37:18; 41:18 (Vol. 2)
tight cuts, 19:14 (Vol. 1)
wing nut bottle cap, 136:41 (Vol. 4)
Scrollwork, sanding, 152:38 (Vol. 4)
Secure shelves, 194:11 (Vol. 5)
Security, garage door, 81:15 (Vol. 3)
Shaker pegs, secure, 97:16 (Vol. 3)
Sharpening, 1:24 (Vol. 1)
awl, 62:14 (Vol. 2)
cleaning stone, 55:12 (Vol. 2)
jointer knives, 117:34 (Vol. 3)
rasps, 6:13 (Vol. 1)
scraper, 4:12 (Vol. 1)
spade bits, 40:18 (Vol. 2)
wet grinding, 130:37; 147:24 (Vol. 4)
with a strip sander, 172:22 (Vol. 5)
Sharp garbage disposal, 180:19 (Vol. 5)
Sheet goods,
car carrier, 175:38 (Vol. 5)
hauling, 54:17; 73:8 (Vol. 2);
160:102 (Vol. 4)
lifting, 189:13 (Vol. 5)
storing, 44:10 (Vol. 2)
Sheetrocking simplified, 170:26 (Vol. 5)
Shelf-pin drilling (Vol. 5)
jig, 162:30 (Vol. 5)
for hand drills, 170:25 (Vol. 5)
guide, 177:14 (Vol. 5)
template, 173:18 (Vol. 5)
dovetail jig, 180:14 (Vol. 5)
28
Shelving,
basement jack posts, 192:12 (Vol. 5)
hot glue, 52:10 (Vol. 2)
raise lip, 146:42 (Vol. 4)
standard installation, 132:38 (Vol. 4)
starting block, 65:8 (Vol. 2)
supports, 70:10; 73:12 (Vol. 2);
121:31 (Vol. 4)
Shims, steady tools, 70:10 (Vol. 2)
Shop apron, 9:18 (Vol. 1)
Shop ceiling, finishing, 168:22 (Vol. 5)
Shop rag box holder, 186:16; 193:12 (Vol. 5)
Shop tips,
best all-time, 187:62 (Vol. 5)
organizer, 186:16; 193:12 (Vol. 5)
reminder, 144:37 (Vol. 4)
Shop vacuum (Vol. 5)
accessory caddy, 176:89 (Vol. 5)
bumper, 171:24 (Vol. 5)
Signature,
plate, 186:15 (Vol. 5)
dating with a penny, 78:30 (Vol. 3)
Slick portable tool bases, 172:25 (Vol. 5)
Slots, mirror image, 146:34 (Vol. 4)
Small parts (Vol. 5)
clamping, 187:8 (Vol. 5)
grinding safety, 161:30 (Vol. 5)
Spindle sizing gauge, 195:8 (Vol. 5)
Squares,
marks with bandsaw, 170:26 (Vol. 5)
modify, 44:14 (Vol. 2)
Squaring,
large panels, 185:11 (Vol. 5)
laminated parts, 173:20 (Vol. 5)
modified triangle, 98:22 (Vol. 3)
Squeaky floor fix, 175:37 (Vol. 5)
Staples, fasten corners, 45:22 (Vol. 2)
Stationary tools, 9:24 (Vol. 1)
keys, 20:16 (Vol. 1)
stand, 10:17 (Vol. 1)
Stock support, 32:27 (Vol. 1)
fold-down, 184:16 (Vol. 5)
for vertical parts, 178:16 (Vol. 5)
Stop blocks, 22:16 (Vol. 1)
Storage,
abrasives, 2:25 (Vol. 1)
airtight, 1:27 (Vol. 1)
bins, 23:18 (Vol. 1); 35:16 (Vol. 2)
hanging, 163:32 (Vol. 5)
Storage, continued,
cart, 41:16 (Vol. 2)
coffee cans, 105:26; 113:14 (Vol. 3)
drawer, 51:16 (Vol. 2)
drill bits, 159:96 (Vol. 4)
extension cord, 107:23 (Vol. 3)
lubricant , 2:28 (Vol. 1)
kiosk, 141:41 (Vol. 4)
pencils, 79:26 (Vol. 3)
pop bottle, 52:15 (Vol. 2)
rolling drawers, 74:30 (Vol. 2)
router bits, 149:16 (Vol. 4)
screwdrivers, 65:12 (Vol. 2)
sheet goods, 137:37 (Vol. 4)
stock, 64:12 (Vol. 2)
suspended, 172:25 (Vol. 5)
swing out rack, 103:30 (Vol. 3)
tin can, 54:12 (Vol. 2)
toe kick, 147:29 (Vol. 4)
tool pantry, 146:41 (Vol. 4)
underneath workbench, 156:104 (Vol. 4)
vertical drawers, 152:32 (Vol. 4)
wire baskets, 79:20 (Vol. 3)
Story sticks, triple-use, 189:10 (Vol. 5)
Story board for tablesaw, 185:8 (Vol. 5)
Straight cuts on odd parts, 193:17 (Vol. 5)
Straightedge tablesaw jig, 181:10 (Vol. 5)
String cutter, workbench, 22:18 (Vol. 1)
Stripping,
paintbrush, 31:18 (Vol. 1)
Support,
milk jugs, 116:31 (Vol. 3)
T-fixture, 144:35 (Vol. 4)
Surfacing, thin strips, 28:14 (Vol. 1)
T-track as tablesaw runners, 174:26 (Vol. 5)
Table apron, tapered legs, 164:24 (Vol. 5)
Table extension, ceiling, 88:26 (Vol. 3)
Tablesaw,
alignment, 122:38; 128:41 (Vol. 4)
angled tenons, 148:26 (Vol. 4)
arbor nut, 8:12 (Vol. 1); 155:99 (Vol. 4)
bevel, 8:10 (Vol. 1)
bevel blade tuneup, 149:19 (Vol. 4)
blade height, 50:16 (Vol. 2)
blade tightening, 60:10 (Vol. 2)
box lid, 59:10 (Vol. 2); 105:22 (Vol. 3)
brass screw jig, 62:12 (Vol. 2)
clamp on edge guide, 99:24 (Vol. 3)
chamfer cuts, 132:34 (Vol. 4)
cove cutting guide, 155:92 (Vol. 4)
crosscutting, 22:12 (Vol. 1)
cutting cove moldings, 116:38 (Vol. 3)
cutting multiple parts, 142:22 (Vol. 4)
cutting thin materials, 173:16 (Vol. 5)
dado blades, 10:19; 13:12 (Vol. 1);
36:23 (Vol. 2)
dado set, 129:40; 150:20 (Vol. 4)
double insert, 122:43 (Vol. 4)
dowel jig, 157:35 (Vol. 4)
downdraft table, 102:22 (Vol. 3)
dust-collection (Vol. 5)
solution, 180:22 (Vol. 5)
sealing, 190:15 (Vol. 5)
extension pipe clamps, 45:22 (Vol. 2)
extension stop, 110:34 (Vol. 3)
extension table, 53:18 (Vol. 2)
fence (Vol. 5)
deflection deadener,
177:10 (Vol. 5)
micro-adjuster, 190:12 (Vol. 5)
magnetic, 169:25 (Vol. 5)
rail support, 130:34 (Vol. 4)
inserts, 14:14 (Vol. 1)
glue insert, 95:15 (Vol. 3)
jig T-slots, 117:36 (Vol. 3)
milling, 141:39 (Vol. 4)
milling drawer sides, 129:32 (Vol. 4)
miter gauge, 13:14; 19:18; 22:12; 24:16; 27:14 (Vol. 1)
accuracy, 31:21 (Vol. 1);
159:99 (Vol. 4)
fence, 86:20 (Vol. 3)
fit, 62:14 (Vol. 2)
squaring, 167:30 (Vol. 5)
miter jig, 81:12 (Vol. 3)
miter stop, 8:12 (Vol. 1)
molding head and cutters, 52:13 (Vol. 2)
open grid extensions, 55:16 (Vol. 2)
outfeed roller, 63:14 (Vol. 2)
panel cutting jig, 116:22 (Vol. 3)
panel pushing jig, 153:26 (Vol. 4)
precision cuts, 102:26 (Vol. 3)
push sticks, 16:22 (Vol. 1);
33:28; 70:15 (Vol. 2)
rabbet trim panels, 72:12 (Vol. 2)
rail shelves, 75:23 (Vol. 2)
29
rip fence, 5:76; 32:18 (Vol. 1);
63:17 (Vol. 2)
rip fence caster, 116:34 (Vol. 3)
rip fence gauge, 76:18 (Vol. 3)
rip fence stop bolt, 151:26 (Vol. 4)
rip guide, 92:20 (Vol. 3)
rip thin material, 115:28 (Vol. 3);
153:34 (Vol. 4)
ripping at angles, 38:28 (Vol. 2)
ripping narrow, 28:20 (Vol. 1)
ripping straight edge, 37:16 (Vol. 2)
ripping thin pieces, 25:18 (Vol. 1)
safety, 8:10; 9:18; 21:16 (Vol. 1)
scribed line, 130:34 (Vol. 4)
sled (Vol. 5)
multi-tasking, 192:15 (Vol. 5)
runners, adjustable, 181:14 (Vol. 5)
small pieces, 6:12 (Vol. 1);
107:23 (Vol. 3); 132:28 (Vol. 4)
small stock jig, 63:18 (Vol. 2)
switch guard, 179:15 (Vol. 5)
tall pieces, 132:32 (Vol. 4)
tapering, 136:38 (Vol. 4)
tenon and dadoe, 116:39 (Vol. 3)
zero clearance insert, 113:14 (Vol. 3);
147:22 (Vol. 4)
Tack cloths, polish, 116:36 (Vol. 3)
Tape measure,
notepaper, 8:16 (Vol. 1)
Tape,
dispenser, 3:38 (Vol. 1)
double faced, 14:16; 23:16 (Vol. 1);
35:18 (Vol. 2); 90:26 (Vol. 3)
electrical, 46:23 (Vol. 2)
masking, 41:14; 44:12 (Vol. 2)
removal, 30:18 (Vol. 1)
stick free, 20:18 (Vol. 1)
Tapered legs, extension blocks, 95:11 (Vol. 3)
Template routing material, 193:10 (Vol. 5)
Tenons
jig, 126:32 (Vol. 4)
round in dowel center, 131:35 (Vol. 4)
round wedge, 131:31 (Vol. 4)
Thin-strip ripping
guide, 1:23 (Vol. 1); 194:12 (Vol. 5)
spacers, 175:32 (Vol. 5)
Threaded inserts, 11:12 (Vol. 1); 134:26;
135:28 (Vol. 4)
30
Threaded inserts, continued,
jig, 59:12 (Vol. 2)
leveler, 193:10 (Vol. 5)
Thumbscrews, scrapwood wrench, 56:16 (Vol. 2)
Tin punching jig, drill press, 138:38 (Vol. 4)
Tool case identification, 176:86 (Vol. 5)
Tool stand vibration, 131:34 (Vol. 4)
Toys,
eye application, 121:30 (Vol. 4)
rocking horse silencer, 132:32 (Vol. 4)
truck sides, 103:28 (Vol. 3)
wheels, 151:31 (Vol. 4)
axle jig, 66:15 (Vol. 2)
bushings, 53:18 (Vol. 2)
plastic washers, 74:28 (Vol. 2)
treads, 68:10 (Vol. 2)
Tracing, 135:32 (Vol. 4)
Trim guide, 2:26 (Vol. 1)
Truing, 1:27 (Vol. 1)
Try square, 41:17 (Vol. 2)
Turning and lathes,
bowls, 102:27 (Vol. 3); 125:30;
127:41; 133:30; 136:40 (Vol. 4)
buffer plate, 6:12 (Vol. 1)
chuck, 79:24 (Vol. 3)
color code, 57:18 (Vol. 2)
countersunk holes, 74:28 (Vol. 2)
drill press accessory, 115:29 (Vol. 3)
faceplates, 6:13 (Vol. 1); 137:40 (Vol. 4)
separating wedge, 183:20 (Vol. 5)
guide, 49:12 (Vol. 2)
height extension, 132:36 (Vol. 4)
hollow, 38:18 (Vol. 2)
hollow sanding, 53:22 (Vol. 2)
jamb chuck, 183:22 (Vol. 5)
mounting blocks, 103:33 (Vol. 3)
piggybacking, 176:85 (Vol. 5)
pipe cap, 58:14 (Vol. 2)
plane taper, 56:18 (Vol. 2)
plywood guard, 109:26 (Vol. 3)
pusher for taped on parts, 119:30 (Vol. 3)
sanding disc, 90:27 (Vol. 3);
sorter, 175:35 (Vol. 5)
shavings shield, 190:15 (Vol. 5)
spindles, complex, 185:15 (Vol. 5)
split, 109:37 (Vol. 3)
tape on bowls, 30:22 (Vol. 1)
tenoning with, 65:10 (Vol. 2)
tiny parts, 112:32 (Vol. 3)
tool rest, 79:30 (Vol. 3)
tool storage, 94:16 (Vol. 3); 153:26 (Vol. 4)
Turning and lathes, continued,
basket, 171:26 (Vol. 5)
tools, 50:21 (Vol. 2)
turning background, 91:32 (Vol. 3)
Vacuum, 12:14 (Vol. 1)
filter cleaning, 115:30 (Vol. 3)
pump for finishes, 189:15 (Vol. 5)
stumbling prevention, 132:40 (Vol. 4)
Veneer cutting, 27:20 (Vol. 1)
Veneer, quartersawn skin, 158:31 (Vol. 4)
Vise, 13:14 (Vol. 1)
dogless, 152:38 (Vol. 4)
mechanic’s, 69:19 (Vol. 2)
rabbet, 43:14 (Vol. 2)
Warped wood, 27:19 (Vol. 1)
Wax paper dispenser, 108:22 (Vol. 3)
Wedge clamp stand, 167:36 (Vol. 5)
Wing nut palm wrench, 145:34 (Vol. 4)
Wing nuts
loosening, 26:18 (Vol. 1)
Wood filler, matching, 14:19 (Vol. 1)
WOOD magazine,
organizer, 111:24 (Vol. 3); 118:38 (Vol. 3);
143:34; 148:28 (Vol. 4)
plans, hanger, 149:20 (Vol. 4)
protector, 29:14 (Vol. 1); 103:35 (Vol. 3)
Workbench,
carver’s trough, 85:11 (Vol. 3)
clamping table, 93:14 (Vol. 3)
drop down tools, 158:30 (Vol. 4)
extender, 182:14; 187:14 (Vol. 5)
extension ironing board, 98:20 (Vol. 3)
finishing area, 132:34; 158:30 (Vol. 4)
fold down benchtop, 94:14 (Vol. 3)
grinder location, 55:12 (Vol. 2)
hideaway table, 109:24 (Vol. 3);
133:28; 141:40 (Vol. 4)
lighting, 112:36 (Vol. 3)
long stock bracket, 31:14 (Vol. 1)
mobile, 135:26 (Vol. 4)
RV table brackets, 99:22 (Vol. 3)
shelf space, 149:20 (Vol. 4)
shelf support, 56:16 (Vol. 2)
sliding stop, 79:20 (Vol. 3)
spinning spacers, 111:32 (Vol. 3)
temporary, 141:38 (Vol. 4); 187:10 (Vol. 5)
trapdoor, 95:14 (Vol. 3)
wall mounted, 79:28 (Vol. 3)
Workmate,
extra holes, 70:15 (Vol. 2)
framing clamp, 40:14 (Vol. 2)
wobble free, 103:35 (Vol. 3)
Wrench slippage, 157:36
Zero-clearance slot, 2:28 (Vol. 1)
Zero-clearance insert (Vol. 5)
double-duty, 195:10 (Vol. 5)
instant, 181:14 (Vol. 5)
safety, 175:30
Techniques and Features
Acrylic-impregnated wood, 49:50 (Vol. 2)
Adhesives,
choosing, 7:106 (Vol. 1)
cyanoacrylate, 67:62 (Vol. 2)
epoxy,
tips, 156:28 (Vol. 4)
Air compressor, tips, 34:76 (Vol. 2)
Arts & Crafts, history, 132:72 (Vol. 4)
Associations, 124:76 (Vol. 4)
American Forestry Assoc., 10:20 (Vol. 1)
Early American Industries Assoc.,
4:24 (Vol. 1); 75:8 (Vol. 2)
International Wood Collectors’ Society,
2:121 (Vol. 1)
Marquetry Society of America, 7:34 (Vol. 1)
Midwest Tool Collectors, 11:88 (Vol. 1)
National Carvers Museum, 8:93 (Vol. 1)
Associations, continued,
National Wood Carvers Assoc.,
5:16 (Vol. 1)
Society Of Wood Craftsmen, 12:85 (Vol. 1)
The Ward Foundation, 3:111 (Vol. 1)
The Woodworking Assoc. of North America, 6:20 (Vol. 1)
Banding curves, how to, 102:37 (Vol. 3)
Bandsaw
blade, coiling, 60:85 (Vol. 2);
191:18 (Vol. 5)
techniques, 15:40 (Vol. 1)
table system, accessories, 149:64 (Vol. 4)
tune-up, 144:80 (Vol. 4)
Barkrosing, Nordic decorative technique,
61:54 (Vol. 2)
Barrels, Ken Knox, 96:29 (Vol. 3)
31
Baseball bat maker, Juan Faxas, 106:37 (Vol. 3)
Baseboard & chair rail, 194:66 (Vol. 5)
Baskets and basketmakers,
Joe & Barb Melcher, 111:39 (Vol. 3)
split oak - Don Yarger, 3:45 (Vol. 1)
Steven Zeh, 54:35 (Vol. 2)
Beds,
bunk bed safety guidelines, 144:24 (Vol. 4)
futon mattress, shopping, 139:86 (Vol. 4)
Bent lamination, 146:78 (Vol. 4)
Bentwood oval trays, Ken Schubert,
146:90 (Vol. 4)
Bevel basics, 85:30 (Vol. 3)
Beveled tapers, 192:22 (Vol. 5)
Bird feeders, Gary Schrodt, 58:27 (Vol. 2)
Birdhouses, 28:78 (Vol. 1)
guidelines, 77:70 (Vol. 3)
Biscuit joining, 128:85 (Vol. 4)
basics, 57:48 (Vol. 2)
blunders, avoiding, 193:28 (Vol. 5)
jig, 161:52 (Vol. 5)
how to tune, 160:50 (Vol. 4)
sharpening, 125:94 (Vol. 4)
Boats,
canoes,
bark, Jack Minehart, 34:29 (Vol. 2)
cedar-strip, Carl Bumbaca,
81:37 (Vol. 3)
Philip Greene, 121:41 (Vol. 4)
Chris-Craft, history, 115:46 (Vol. 3)
kits, 98:78 (Vol. 3)
Old Ironsides - USS Constitution,
99:64 (Vol. 3)
The Welcome sailing ship, 86:68 (Vol. 3)
Bookcases/shelves, woodworkers’ standards,
21:58 (Vol. 1)
Bookmatching
panels, 160:28 (Vol. 4)
basics, 191:72 (Vol. 5)
Books,
Identifying wood, 74:34 (Vol. 2)
Queen Anne Furniture, 49:75 (Vol. 2)
recommendations, 110:92 (Vol. 3)
woodworking, 20:58 (Vol. 1)
Boomerangs, Chet Snoffer, 11:28 (Vol. 1)
Bowls,
blanks, harvest, 20:44 (Vol. 1)
Calabash, Stewart Medeiros,
44:23 (Vol. 2)
design, 28:54 (Vol. 1)
Dough, John Sadler, 41:25 (Vol. 2)
32
Bowls, continued,
finishing, 116:58 (Vol. 3); 169:14 (Vol. 5)
scrapwood, Al Francendese, 68:25 (Vol. 2)
segmented, Galen Carpenter,
127:49 (Vol. 4)
stave, 23:30 (Vol. 1)
turning, 57:77 (Vol. 2)
Bows,
Kent Ostrem, 120:41 (Vol. 3)
longbows, Don Adams, 27:42 (Vol. 1)
Boxes,
bandsawn,
Jerry Patrasso, 66:25 (Vol. 2)
Richard Rothbard, 6:26 (Vol. 1)
burl, Michael Elkan, 90:35 (Vol. 3)
carved, George Goatey, 69:35 (Vol. 2)
music, Richard Gard, 43:31 (Vol. 2)
veneered, marquetry, 129:72 (Vol. 4)
Box joints,
how to make, 104:12 (Vol. 3)
large, 127:68 (Vol. 4)
Bracket feet from crown molding, 185:22 (Vol. 5)
Brass,
hardware patina, 147:14 (Vol. 4)
nameplate, 142:38 (Vol. 4)
parts, working with, 191:74 (Vol. 5)
sheet, working with, 155:22 (Vol. 4)
trim polishing, 169:99 (Vol. 5)
Bridle joints, 161:24 (Vol. 5)
Burls,
harvesting, 130:16; 154:42 (Vol. 4)
Michael Elkan, 94:39 (Vol. 3)
Business, 136:26 (Vol. 4); 62:48 (Vol. 2)
careers in woodworking, 124:56 (Vol. 4)
co-op, 115:16 (Vol. 3)
craft fairs, 15:62, 104 (Vol. 1);
92:80 (Vol. 3)
decide what to sell, 94:22 (Vol. 3)
direct sales, 124:22 (Vol. 4)
hobby income, 132:16 (Vol. 4)
how to price work, 96:6 (Vol. 3)
insurance, 108:18 (Vol. 3)
internet sales, 127:14 (Vol. 4)
laws, 101:83 (Vol. 3)
marketing, 106:8 (Vol. 3)
publicity, 120:18 (Vol. 3)
selling your work, 111:14 (Vol. 3)
taxes, 123:10 (Vol. 4)
working with other woodworkers,
87:24 (Vol. 3)
Butcher block, care, 125:51 (Vol. 4)
Butterfly spline joints, 170:32 (Vol. 5)
Buying wood,
mail order, 35:72 (Vol. 2)
wood by mail, 3:92 (Vol. 1)
Cabinets
doors,
flush-mounted, 128:30 (Vol. 4)
inset installation, 182:88 (Vol. 5)
rail and stile, 130:24 (Vol. 4)
mounting, 164:68 (Vol. 5)
warped, 185:24 (Vol. 5)
installing, 136:60 (Vol. 4)
Kktchen, standards, 13:64 (Vol. 1)
made easy, 191:50 (Vol. 5)
mistakes, common, 3:116 (Vol. 1)
panels, matching, 45:48 (Vol. 2)
tips, 30:34 (Vol. 1)
Cabinetmaker, Clarence Hargis, 14:34 (Vol. 1)
Cabriole legs, 171:48 (Vol. 5)
Calipers, using, 90:8 (Vol. 3)
Carousel horses, Jerry Reinhardt, 67:23 (Vol. 2)
Carvers & carving,
Amber Jean, 139:68 (Vol. 4)
basic tools, 7:42 (Vol. 1)
blanks, bandsawn, 14:24 (Vol. 1)
Bob Boomer, 40:27 (Vol. 2)
chip-carving,
how to, 78:73 (Vol. 3)
Pam Gresham, 86:33 (Vol. 3)
Desiree Hajny, 29:56 (Vol. 1)
faces, 45:54 (Vol. 2)
finishing, Smith, Refsal, & Odden,
12:38 (Vol. 1)
fish, Rick Beyer, 21:76 (Vol. 1)
fly fishing, Gary Barnard, 79:33 (Vol. 3)
furniture parts, 162:99 (Vol. 5)
improve your skills, 126:64 (Vol. 4)
Indian, history, 43:36 (Vol. 2)
ironwood, Refugio Garcia, 71:32 (Vol. 2)
Michelle Feasel, 10:26 (Vol. 1)
Pat Fushimi, 23:40 (Vol. 1)
relief, Rick Harney, 50:33 (Vol. 2)
Rick Beyer, 70:58 (Vol. 2)
roughout, machine-made, 52:32 (Vol. 2)
Scandinavian, Harley Refsal, 4:70 (Vol. 1)
shorebirds, Robert Swain, 77:29 (Vol. 3)
Southwest, Max Alvarez, 37:36 (Vol. 2)
tables, Bill Herrick, 74:39 (Vol. 2)
tips, 63:50 (Vol. 2)
Carvers & carving, continued,
Tom Golding, architectural, 132:88 (Vol. 4)
whittling, 54:40 (Vol. 2)
woods for, 45:66 (Vol. 2)
Caskets, 130:66 (Vol. 4)
Celebrity woodworkers, 30:48 (Vol. 1)
Chairs,
caning, 23:48 (Vol. 1); 123:81 (Vol. 4)
design standards, 154:24 (Vol. 4)
green wood, John Alexander,
75:37 (Vol. 2)
repairing, 147:42 (Vol. 4)
rocking chairs,
Hugh Vaughn, 19:40 (Vol. 1)
Robert Hensarling, 112:43 (Vol. 3)
Sam Maloof, 156:48 (Vol. 4)
seats, routed, 121:10 (Vol. 4)
windsor, Bob Dillon, 118:51 (Vol. 3)
Chip-out, avoiding, 135:68 (Vol. 4)
Chisels,
mortising, 129:106 (Vol. 4)
use, 97:9 (Vol. 3); 160:44 (Vol. 4)
bench, 65:64 (Vol. 2)
Circle layout, 124:18 (Vol. 4)
Clamps and Clamping
using, 41:60 (Vol. 2)
pipe, 30:66 (Vol. 1)
secrets, 94:50 (Vol. 3)
tips, 171:92 (Vol. 5)
Climb cutting, 108:8 (Vol. 3)
Clubs, woodworking, 40:62 (Vol. 2)
Clocks and Clockmakers,
Bill Hopkins, 7:38 (Vol. 1)
Edward Stone, 92:39 (Vol. 3)
James Borden, 128:51 (Vol. 4)
Collecting old tools, 149:9 (Vol. 4)
Compound miters, 87:5 (Vol. 3)
Computer programs, 83:78 (Vol. 3)
Contests,
Build-a-Gift winners, 175:26 (Vol. 5)
Build A Toy results,
31:38 (Vol. 1); 37:54; 46:56; 46:82;
49:18; 55:68; 64:66; 73:72 (Vol. 2);
82:34; 91:8;108:72 (Vol. 3);
clock winners, 128:14 (Vol. 4)
For the Birds winners, 149:96 (Vol. 4)
Winner’s circle showcase for kids,
167:62 (Vol. 5)
Workshop winners, 140:72 (Vol. 4)
Copper,
add to projects, 148:17 (Vol. 4)
aging, 84:8 (Vol. 3)
33
Copper, continued,
patina 134:54 (Vol. 4)
Corners, rounding, 103:12 (Vol. 3)
Crib safety, 173:56 (Vol. 5)
Crown molding, 135:50 (Vol. 4);
Curved, tapered table legs, 172:68 (Vol. 5)
Curves, 147:16 (Vol. 4)
Cutting board, tips, 22:83 (Vol. 1)
Dadoes,
dead-on, 188:16 (Vol. 5)
grooves, and rabbets, 171:65 (Vol. 5)
how to, 74:56 (Vol. 2)
fixing wide, 162:18 (Vol. 5)
guide, self-sizing, 171:34 (Vol. 5)
stopped, 183:30 (Vol. 5)
Dado shims, 82:18 (Vol. 3)
Disabled woodworkers,
children with disabilities, 94:62 (Vol. 3)
class, Don Mostrom, 12:28 (Vol. 1)
Door grilles/mullions, 169:54 (Vol. 5)
Dovetails,
drawers, making & installing, 55:30 (Vol. 2)
handcut, 168:64 (Vol. 5)
jig, using, 19:48 (Vol. 1)
joinery, 169:30 (Vol. 5)
keys, 116:43 (Vol. 3)
hand-cut, 87:66 (Vol. 3)
showdown, 182:50 (Vol. 5)
sliding, 148:90 (Vol. 4)
wide panels, 194:38 (Vol. 5)
Dovetail lap joint, handcut, 165:28 (Vol. 5)
Dowel joints, 108:110 (Vol. 3)
how to make, 68:30 (Vol. 2);
143:24 (Vol. 4)
and round tenons, 183:42 (Vol. 5)
Drawer,
joinery and mounting, 180:48 (Vol. 5)
fixing out-of-square, 194:22 (Vol. 5)
lock-rabbet joints, 110:12 (Vol. 3)
slides, installing, 80:93 (Vol. 3)
Drilling,
accurately, 186:70 (Vol. 5)
do’s & don’t’s, 11:87 (Vol. 1)
drill press, tips & techniques,
30:74 (Vol. 1); 149:100 (Vol. 4)
large holes, 122:34 (Vol. 4)
Drum, Ashiko-style, Raven Tekwe, 103:37 (Vol. 3)
Duck calls, Butch Richenbach, 31:56 (Vol. 1)
Duck decoys, Grayson Chesser, Jr., 55:25 (Vol. 2)
Duplicating project parts, 193:52 (Vol. 5)
34
Dust,
collection system, 43:40 (Vol. 2)
control in workshop, 143:80 (Vol. 4)
solutions, 85:88 (Vol. 3)
Edge-banding,
basics, 117:82 (Vol. 3)
Edge-joining, 29:64; 1:37 (Vol. 1)
bowed stock, how to, 97:50 (Vol. 3)
with pipe clamps, 19:85 (Vol. 1)
Exterior projects, 115:66 (Vol. 3)
Felt top installation, 167:96 (Vol. 5)
Fences, Colonial Williamsburg, 5:66 (Vol. 1)
Finger joints, machine-cut, 168:96 (Vol. 5)
Finishes and finishing, 140:40; 158:70 (Vol. 4)
acrylic paints, 59:48 (Vol. 2)
Amana finish, 19:70 (Vol. 1)
aniline dyes, 16:48 (Vol. 1); 104:16 (Vol. 3)
Arts & Crafts finish, 109:74 (Vol. 3)
brush basics, 67:54 (Vol. 2)
body shop, 77:52 (Vol. 3)
clear exterior, 103:60 (Vol. 3)
clear finish, 142:52 (Vol. 4)
chart, 111:74 (Vol. 3)
coloring wood, 183:26 (Vol. 5)
country finish, 110:72 (Vol. 3);
163:74 (Vol. 5)
crackling, 51:24 (Vol. 2)
dyes, 161:84 (Vol. 5)
colorful, 164:26 (Vol. 5)
grain figure, 157:42 (Vol. 4)
ebonizing, 103:18 (Vol. 3)
epoxy, 63:62 (Vol. 2); 153:118 (Vol. 4)
exterior projects, 116:70 (Vol. 3)
faux, 178:32 (Vol. 5)
wood, 74:98 (Vol. 2),
129:78 (Vol. 4)
Fern Weber’s lacquer, 22:48 (Vol. 1)
figured wood, 164:86 (Vol. 5)
filling wood pores, 111:35 (Vol. 3);
181:18 (Vol. 5)
fixes, 190:18 (Vol. 5)
floor, 151:72 (Vol. 4)
food safe, 64:74 (Vol. 2); 99:38 (Vol. 3);
145:24 (Vol. 4)
friction-film for turnings, 59:58 (Vol. 2)
gel stain, 68:58 (Vol. 2); 70:28 (Vol. 2);
105:54 (Vol. 3)
glass smooth, 35:50 (Vol. 2)
glue size, 169:102 (Vol. 5)
Finishes and finishing, continued,
identification, 117:74 (Vol. 3)
lacquer, 18:66 (Vol. 1); 41:52 (Vol. 2);
90:12 (Vol. 3)
spray, 96:46 (Vol. 3)
linseed, turpentine-varnish, 54:48 (Vol. 2)
making old look new, 4:66 (Vol. 1)
matching color, 160:16 (Vol. 4)
Mission finish, 158:48 (Vol. 4);
173:73 (Vol. 5);
mixes, 163:88 (Vol. 5)
oak, 176:34 (Vol. 5)
oil, 83:52; 96:46 (Vol. 3); 125:64 (Vol. 4)
and beeswax, 28:36 (Vol. 1)
Russ Filbeck, 143:74 (Vol. 4)
vs. film, 173:65 (Vol. 5)
open-grain wood, 152:96 (Vol. 4)
outdoor finishes, 5:64 (Vol. 1);
69:82 (Vol. 2); 183:76 (Vol. 5)
paint, 89:29 (Vol. 3)
outdoor projects, 71:62 (Vol. 2)
plywood, 77:92 (Vol. 3)
painting decoys, 104:78 (Vol. 3)
secrets, 168:50 (Vol. 5)
stone finishes, 42:76 (Vol. 2)
paste stains & varnish, 1:99 (Vol. 1)
paste wax, 112:14 (Vol. 3); 170:38 (Vol. 5)
penetrating, 126:20 (Vol. 4)
perfect finishes, 167:50 (Vol. 5)
pine, 19:93 (Vol. 1)
polymerized tung oil, 14:52 (Vol. 1)
polyurethane, 86:16; 96:46 (Vol. 3)
glass-smooth, 150:38 (Vol. 4)
tested, 73:44 (Vol. 2)
tips, 171:89 (Vol. 5)
preparation, Jim Kull, 139:60 (Vol. 4)
product labels, 30:52 (Vol. 1)
pro’s pointers for prep, 95:48 (Vol. 3)
quartersawn oak, 146:22 (Vol. 4)
red oak, 132:14 (Vol. 4)
removers, tested, 53:54 (Vol. 2)
removing, 58:62 (Vol. 2)
repair dents, 162:96 (Vol. 5)
renewing dull finish, 136:18 (Vol. 4)
rubbing out, 145:78 (Vol. 4)
sanding sealers, 155:110 (Vol. 4)
school, 49:46 (Vol. 2)
shellac, 81:66 (Vol. 3); 192:18 (Vol. 5)
French-polishing, 179:18 (Vol. 5)
solvents and thinners,
building a finish, 159:52 (Vol. 4)
how to use, 147:44 (Vol. 4)
Finishes and finishing, continued,
safety, 102:81 (Vol. 3)
spray-finishing,
clear, 78:20 (Vol. 3)
HVLP, 169:78 (Vol. 5)
masking, 186:76 (Vol. 5)
spray paint, enamel, 40:58 (Vol. 2)
stains, 114:58 (Vol. 3)
matching plywood & hardwood,
188:14 (Vol. 5)
resistance, 27:46 (Vol. 1)
start of a great finish, 148:106 (Vol. 4)
stripping, 9:72 (Vol. 1)
success, 164:44 (Vol. 5)
tinting, 171:52 (Vol. 5)
toning, 154:66 (Vol. 4)
turnings, 120:8 (Vol. 3)
Varathane Professional, 11:58 (Vol. 1)
varnish, brush on, 156:92 (Vol. 4)
vinegar painting, 68:80 (Vol. 2)
walnut, 168:32 (Vol. 5)
water-based, 42:42 (Vol. 2) ;
78:46 (Vol. 3); 132:84 (Vol. 4)
water-based lacquer, 34:42 (Vol. 2)
water-based polyurethane, 96:46 (Vol. 3)
wax, 29:54 (Vol. 1); 136:28 (Vol. 4)
wet-sanding, 124:39 (Vol. 4)
wipe-on, 150:12 (Vol. 4); 185:28 (Vol. 5)
wood bleach, 125:18 (Vol. 4)
Fish decoys, Ray Zelinski, 60:35 (Vol. 2)
Fishing lures, Ron Mirabile, 73:31 (Vol. 2)
Flooring, 122:HI1
Flutes, how to make, 150:40 (Vol. 4)
Forest Products Laboratory, 69:54 (Vol. 2)
Forests and forestry, 31:46 (Vol. 1)
management, 121:37; 124:84 (Vol. 4)
update, 40:72 (Vol. 2); 142:20 (Vol. 4)
Frame joints, miter-free, 175:82 (Vol. 5)
Frame-and-panel
doors, 182:46 (Vol. 5)
fundamentals, 190:56 (Vol. 5)
Frontier woodworking, Dale Peel, 148:84 (Vol. 4)
Furniture and furnituremakers,
Amana, 19:66 (Vol. 1)
classic, George Reid, 89:31 (Vol. 3)
Country,
Mario Rodriguez, 45:37 (Vol. 2)
Bill Draper, 147:74 (Vol. 4)
designs,
Bob Newton, 84:37 (Vol. 3);
Doug Green, 122:49 (Vol. 4)
distressing, 133:36 (Vol. 4)
35
Furniture and furnituremakers, continued,
guide to classic, 16:50 (Vol. 1)
industry secrets, 101:58 (Vol. 3)
James Krenov, 143:68 (Vol. 4)
keepsake, 184:64 (Vol. 5)
kit furniture, 86:73 (Vol. 3)
log, Pat Pitsch, 104:37 (Vol. 3)
Louisiana, Greg Arceneaux,
134:74 (Vol. 4)
Meier brothers, 137:80 (Vol. 4)
miniature, Noral Olson, 20:40 (Vol. 1)
Mission, Michael Schmitt, 109:49 (Vol. 3)
repair, 111:18 (Vol. 3)
appraising, 125:90 (Vol. 4)
antique restoration, 116:47 (Vol. 3)
burns and dents, 115:18 (Vol. 3)
buying antiques, 114:18 (Vol. 3)
cracks in furniture, 139:18 (Vol. 4)
furniture facts, 117:14 (Vol. 3)
heirlooms, 140:22 (Vol. 4)
removing rings, 121:16 (Vol. 4)
replicating parts, 127:30 (Vol. 4)
veneer, 123:18 (Vol. 4)
patching, 124:24 (Vol. 4)
wobbly chair, 132:24 (Vol. 4)
reproduction,
G.L. Sawyer, 114:41 (Vol. 3)
Ken Williamson, 13:32 (Vol. 1)
restoration, Jim Watson, 39:68 (Vol. 2)
rustic,
Bud Hanzlick, 46:35 (Vol. 2)
Greg Mitchell, 126:41 (Vol. 4)
Thomasville Industries, 25:38 (Vol. 1)
Glass
buying, shelving, 141:24 (Vol. 4)
leaded-glass panels, 61:32 (Vol. 2)
working with, 81:92 (Vol. 3)
Glues and glue-ups,
how to, 158:86 (Vol. 4)
flat-panels, 163:51 (Vol. 5)
panels, 112:50 (Vol. 3), 127:43 (Vol. 4)
polyurethane, how-to, 155:112 (Vol. 4)
problems fixed, 163:96 (Vol. 5)
slow-set epoxy, 46:71 (Vol. 2)
squeeze-out, 1:113 (Vol. 1); 66:55 (Vol. 2);
139:22 (Vol. 4)
Golden mean, 173:14 (Vol. 5)
Grain-matched corners, 169:104 (Vol. 5)
Green wood,
drying, 33:46 (Vol. 2)
36
Green wood, continued,
Greene and Greene, Tom Strangeland,
152:80 (Vol. 4)
Guitars, C.F. Martin Company, 41:47 (Vol. 2)
Gunsmith, Bud Morrow, 72:37 (Vol. 2)
Habits of successful woodworkers, 190:66 (Vol. 5)
Half-blind dovetails, how to, 95:42 (Vol. 3)
Half-lap joints, 90:58 (Vol. 3);
169:16; 179:86; 191:38 (Vol. 5)
in small parts, 148:14 (Vol. 4)
Hammerite, how to apply, 100:14 (Vol. 3)
Hand plane,
tuning, 16:112 (Vol. 1)
using, 158:60 (Vol. 4)
Handscrews, using, 9:104 (Vol. 1)
Hanging projects, 84:4 (Vol. 3)
Hardware
buying, 107:68 (Vol. 3)
casters, 83:4 (Vol. 3)
for hanging projects, 78:9 (Vol. 3)
hinges, 131:58 (Vol. 4)
concealed, installation,
155:58 (Vol. 4)
Euro-style, 166:34 (Vol. 5)
mortising, 24:37 (Vol. 1);
193:34 (Vol. 5)
matched, 192:50 (Vol. 5)
knockdown, 143:62 (Vol. 4)
T-molding, plastic, 86:4 (Vol. 3)
Home workshops, reader, 76:74 (Vol. 3)
Idea Shop 1 specifications, 54:58 (Vol. 2)
Idea Shop 2, 72:42 (Vol. 2)
Idea Shop 3, layout, 100:48 (Vol. 3)
Idea Shop 2000, 119:56 (Vol. 3)
Idea Shop 5, tour, 151:44 (Vol. 4)
Insects, 125:37 (Vol. 4)
powder post beetles, 143:35 (Vol. 4)
Intarsia
carved, Ellen Harrington, 56:37 (Vol. 2)
Judy Gale Roberts, 24:38 (Vol. 1)
tips and tricks, 147:20 (Vol. 4)
Wolf Moller, 93:33 (Vol. 3)
Jig-building, 185:42 (Vol. 5)
Joinery,
airtight, 157:74 (Vol. 4)
bandsawn through-dovetail, 51:44 (Vol. 2)
circular-saw, 191:26 (Vol. 5)
fixing old, 108:39 (Vol. 3)
leg-rail, 18:34 (Vol. 1)
locked tenon and socket, 164:36 (Vol. 5)
Joinery, continued,
mortise & tenon, 13:36 (Vol. 1);
48:38 (Vol. 2); 97:62 (Vol. 3);
156:68 (Vol. 4)
fixing, 173:102 (Vol. 5)
split-mortise, through-tenon,
166:10 (Vol. 5)
of yesteryear, 85:78 (Vol. 3)
pocket-hole, 76:38 (Vol. 3);
135:22; 152:26 (Vol. 4)
reinforcements, decorative, 75:50 (Vol. 2)
splines, 145:20 (Vol. 4)
timber-frame, Samule Aaron, 22:36 (Vol. 1)
torture test, 173:58 (Vol. 5)
Part 2, 181:64 (Vol. 5)
waterfall joints, 155:90 (Vol. 4)
Jointer
knives, how to install, 52:56 (Vol. 2)
routines, 189:60 (Vol. 5)
save you money, 194:40 (Vol. 5)
Jukeboxes, history, 129:84 (Vol. 4)
Kerf bending, 152:22 (Vol. 4)
Keyhole cutter bits, router, 140:16 (Vol. 4)
Kit building, 19:50 (Vol. 1)
Kitchen planner, 94:56 (Vol. 3)
Knifemaker, Walt Easley, 30:30 (Vol. 1)
Knots, working around, 190:28 (Vol. 5)
Laminated wood, bending, 8:36 (Vol. 1)
Laminates, plastic,
applying, 10:30 (Vol. 1)
buying, 10:76 (Vol. 1)
edge, 164:14 (Vol. 5)
how to, 80:56 (Vol. 3)
Laser cutting, 37:74 (Vol. 2)
Lasered enhancements, 150:26 (Vol. 4)
Left-hander, tips for, 16:104 (Vol. 1)
Level tables to tools, 151:98 (Vol. 4)
Lighting
display, 150:66 (Vol. 4)
Lumber
air-drying, 59:40 (Vol. 2)
buying, 139:53; 146:58 (Vol. 4)
boards, 51:72 (Vol. 2)
cabinet-quality, 2:66 (Vol. 1)
costs, 104:82 (Vol. 3)
grading, 12:58 (Vol. 1)
hauling, 3:123 (Vol. 1); 71:78 (Vol. 2)
harvesting, 7:66 (Vol. 1); 68:38 (Vol. 2);
105:84 (Vol. 3)
Russ Osterloh, 19:54 (Vol. 1)
logging, 22:68 (Vol. 1); 93:76 (Vol. 3)
Lumber, continued,
Anderson-Tully Co., 50:62 (Vol. 2)
backyard, 113:66 (Vol. 3)
cherry, 27:52 (Vol. 1)
Ed Carpenter, 113:47 (Vol. 3)
timber,
cruising, 11:50 (Vol. 1)
trading, 28:40 (Vol. 1)
matching woods, 153:80 (Vol. 4)
milling, 97:68 (Vol. 3); 37:60 (Vol. 2)
outdoor, weatherproofing, 169:60 (Vol. 5)
reclaimed, 95:70 (Vol. 3)
salvaging, 193:72 (Vol. 5)
shopping, 10:22 (Vol. 1)
sources, 13:86 (Vol. 1)
squaring stock, 49:71 (Vol. 2)
terminology, 75:80 (Vol. 2)
transform rough-sawn, 153:126 (Vol. 4)
treated update, 142:50 (Vol. 4)
warps, fixing, 170:86 (Vol. 5)
water-logged, 114:80 (Vol. 3)
Marquetry,
Dave Peck, 52:27 (Vol. 2)
John Wilson, 17:74 (Vol. 1)
Paul Schurch, marquetry, 131:44 (Vol. 4)
Matchsticks, Pat Acton, 76:33 (Vol. 3)
Math,
fractions, 92:10 (Vol. 3)
geometry,
dividing boards, 15:98 (Vol. 1)
shop, 14:54 (Vol. 1);
185:40 (Vol. 5)
Measuring and marking, 149:34 (Vol. 4)
accuracy, 141:22 (Vol. 4); 177:34 (Vol. 5)
gauge, using, 145:14; 158:16 (Vol. 4)
knife, making blade, 160:14 (Vol. 4)
mistakes, 172:34 (Vol. 5)
tools, 11:85 (Vol. 1)
rules, 77:45 (Vol. 3)
Mentoring, 153:100 (Vol. 4)
Miniatures, 31:50 (Vol. 1)
furniture, Don Perkins, 88:33 (Vol. 3)
Paul Hamler, 125:56 (Vol. 4)
Miters,
clamping, 178:108 (Vol. 5)
cutting, 67:28 (Vol. 2); 153:62 (Vol. 4)
jig, 2:48 (Vol. 1)
half laps, 152:16 (Vol. 4)
three-way, 182:18 (Vol. 5)
moldings, 61:47 (Vol. 2)
picture-perfect, 2:45 (Vol. 1)
splined, 163:18 (Vol. 5)
37
Miters, continued,
three-way, 176:16 (Vol. 5)
Mitersaw,
accuracy and efficiency, 143:96 (Vol. 4)
kickback prevention, 175:94 (Vol. 5)
safety, 178:92 (Vol. 5)
Models,
boats, Steve Rogers, 64:29 (Vol. 2)
cars, Tom Rolison, 70:31 (Vol. 2)
houses, Michael Ridel, 101:43 (Vol. 3)
trucks, Karol Fedoryshyn, 35:52 (Vol. 2)
Moldings, 21:44 (Vol. 1)
how to make, 40:38 (Vol. 2)
wraparound, 147:46 (Vol. 4)
Mortise & tenon, 13:36 (Vol. 1);
48:38 (Vol. 2); 97:62 (Vol. 3);
156:68 (Vol. 4)
fixing, 173:102 (Vol. 5)
split-mortise, through-tenon,
166:10 (Vol. 5)
Mortised lock installation, 195:20 (Vol. 5)
Motors, guide, 52:52 (Vol. 2)
Multi-feather joint jig, 2:93 (Vol. 1)
Musical instruments,
psalteries, David Bede, 8:30 (Vol. 1)
Stan Hess, 80:39 (Vol. 3)
violin maker, Bill Rhode, 57:33 (Vol. 2)
wooden, 23:60 (Vol. 1)
Noise, controlling, 2:38 (Vol. 1)
Norm Abram, 192:38 (Vol. 5)
Northern spotted owl, 88:76 (Vol. 3)
Norwegian folk craft, 67:46 (Vol. 2)
Nutcracker maker, Glenn Crider, 65:27 (Vol. 2)
Old Hand Ways
The Blacksmith, 19:96 (Vol. 1)
Boatbuilders of Chesapeake,
13:90 (Vol. 1)
The Cabinetmaker, 9:96 (Vol. 1)
The Carpenter, 3:58 (Vol. 1)
Carver’s Son, 29:96 (Vol. 1)
Chairmakers, 11:22 (Vol. 1)
The Cooper, 7:93 (Vol. 1)
The Fiddle and Violin, 26:106 (Vol. 1)
The Gunsmith, 16:101 (Vol. 1)
If Walls Could Talk, 38:84 (Vol. 2)
The Joiner, 4:54 (Vol. 1)
Ishi, 27:51 (Vol. 1)
The Millwright, 12:79 (Vol. 1)
Old Kitchen Table, 25:22 (Vol. 1)
The Pioneer, 1:68 (Vol. 1)
The Pioneer, part 2, 2:76 (Vol. 1)
Thoreau, 40:74 (Vol. 2)
38
Old Hand Ways, continued,
The Wheelwright, 6:46 (Vol. 1)
The Woodlot, 21:82 (Vol. 1)
Onlay, 22:28 (Vol. 1)
accents, 148:44 (Vol. 4)
Outdoor products resource guide, 141:100 (Vol. 4)
Patterns,
reproducing, standards, 23:54 (Vol. 1)
transferring, 68:60 (Vol. 2)
Photographing your projects, 24:44 (Vol. 1)
Pictures,
framing techniques, 25:42 (Vol. 1)
mounting, 135:78 (Vol. 4)
Pipes, Al Baier, 26:38 (Vol. 1)
Plane propellers, wooden, 44:52 (Vol. 2)
Planer,
save you money, 194:40 (Vol. 5)
snipe, 179:102 (Vol. 5)
tear-out elimination, 186:22 (Vol. 5)
tricks and truths, 148:54 (Vol. 4)
Planes,
block, 160:48 (Vol. 4)
Plans, 170:76 (Vol. 5)
from photos, 165:20 (Vol. 5)
standards, 18:46 (Vol. 1)
successful projects 165:90 (Vol. 5)
Plastics, working with, 85:60 (Vol. 3);
144:70 (Vol. 4)
Play structures, Barbara Butler, 156:110 (Vol. 4)
Plugs, making, 149:36 (Vol. 4)
Plywood,
Asian, 37:68 (Vol. 2)
baltic and birch, 153:48 (Vol. 4)
crosscutting, 177:9 (Vol. 5)
hardwood, 6:55 (Vol. 1)
judging face side, 7:104 (Vol. 1)
manufacture, 132:43 (Vol. 4)
softwood, manufacture, 17:64 (Vol. 1)
understanding, 76:6 (Vol. 3)
work with, 46:44 (Vol. 2)
Power tools, history of, 100:80 (Vol. 3)
Prison woodworking, P.J. Jeter, 36:62 (Vol. 2)
Production, 105:48 (Vol. 3)
Christmas gifts, 14:27 (Vol. 1)
Project assembly, 9:95 (Vol. 1)
Putters, golf, craftsman, 155:108 (Vol. 4)
Puzzles,
animal, Peter Chapman, 94:33 (Vol. 3)
Jerry Syfert, 130:40 (Vol. 4)
Tom Lensch, 154:104 (Vol. 4)
Rabbet cuts,
making, 106:64 (Vol. 3)
narrow parts, 192:36 (Vol. 5)
Rail and stile doors, step-by-step, 70:62 (Vol. 2)
Rain Forest update, 51:80; 43:79 (Vol. 2)
Raised panel,
construction, basic, 5:43 (Vol. 1)
doors, 110:62 (Vol. 3); 144:42 (Vol. 4)
guide, 62:36 (Vol. 2)
methods, 164:60 (Vol. 5)
mistakes, 190:24 (Vol. 5)
using tablesaw, 36:72 (Vol. 2)
Reader tribute, 193:8 (Vol. 5)
Ready-made project parts, 182:57 (Vol. 5)
Repairs,
workshop mistakes, 79:62 (Vol. 3)
appraising, 125:90 (Vol. 4)
antique restoration, 116:47 (Vol. 3)
burns and dents, 115:18 (Vol. 3)
buying antiques, 114:18 (Vol. 3)
cracks in furniture, 139:18 (Vol. 4)
furniture facts, 117:14 (Vol. 3)
heirlooms, 140:22 (Vol. 4)
holes, 175:104 (Vol. 5)
removing rings, 121:16 (Vol. 4)
replicating parts, 127:30 (Vol. 4)
veneer, 123:18 (Vol. 4)
wobbly chair, 132:24 (Vol. 4)
Resawing, 109:41; 99:10 (Vol. 3); 147:84 (Vol. 4)
safely, 7:44 (Vol. 1); 43:78 (Vol. 2)
Routers and routing,
bits,
beginner’s guide, 2:123 (Vol. 1)
safety, 170:104 (Vol. 5)
setup secrets, 194:50 (Vol. 5)
tune-up, 180:12 (Vol. 5)
vocabulary, 16:30 (Vol. 1)
burn marks, 57:76 (Vol. 2); 159:16 (Vol. 4);
191:22 (Vol. 5)
circles/curves, 184:28 (Vol. 5)
guide bushings, 164:98 (Vol. 5)
plunge 195:54 (Vol. 5)
preventing miscuts, 164:16 (Vol. 5)
sign-making, 92:44 (Vol. 3)
slots, 159:38 (Vol. 4)
stopped cuts, how to, 99:50 (Vol. 3)
subbase centering, 175:106 (Vol. 5)
Routers and routing, continued,
table,
horizontal/vertical, 129:60 (Vol. 4)
insert plate, 192:59 (Vol. 5)
starting pins, 158:10 (Vol. 4)
techniques, 58:50 (Vol. 2); 138:50 (Vol. 4)
Bob & Rick Rosendahl,
132:22 (Vol. 4)
templates, 17:32 (Vol. 1);
133:10; 158:34 (Vol. 4);
178:26 (Vol. 5)
textures, 162:50 (Vol. 5)
tips, 33:34 (Vol. 2); 184:46 (Vol. 5)
trim, six great uses, 177:90 (Vol. 5)
Rust removal, 63:74 (Vol. 2)
Safety, 26:64 (Vol. 1); 39:88 (Vol. 2);
19:24 (Vol. 3)
chainsaw, 126:80 (Vol. 4)
circle cutting w/ router, 110:22 (Vol. 3)
cutting small pieces, 106:16 (Vol. 3)
fire safety tips, 2:119 (Vol. 1);
68:44 (Vol. 2)
First Aid for the shop, 2:22 (Vol. 1)
jointer, 31:64 (Vol. 1); 4:42 (Vol. 3)
habits, 37:70 (Vol. 2)
healthy woodworking, 138:62 (Vol. 4)
hearing, 184:86 (Vol. 5)
kickback, 91:83 (Vol. 3); 140:12 (Vol. 4)
magnetic switches, 115:14 (Vol. 3)
mitersaw, 109:12 (Vol. 3)
respirators, 40:84 (Vol. 2)
shop checklist, 115:41 (Vol. 3)
shop clothing, 20:27 (Vol. 1)
tablesaw cuttoffs and feather board,
104:20 (Vol. 3)
tips, 1:10 (Vol. 1); 47:17 (Vol. 2)
vision solutions, 184:80 (Vol. 5)
wood dust, 78:4 (Vol. 3)
Sandblasting, 34:34 (Vol. 2)
Sanders and Sanding,
belt sander tuneup, 30:80 (Vol. 1)
hand-sanding successfully, 184:68 (Vol. 5)
how to, 83:8 (Vol. 3)
power, tips, 159:22 (Vol. 4)
random-orbit myths, 186:60 (Vol. 5)
shortcuts, 39:62 (Vol. 2)
solutions, 148:10 (Vol. 4)
39
Saving money, 166:84 (Vol. 5)
Sawmills,
Darrell Mattson, 21:40 (Vol. 1)
Scrapers,
plane, 176:38 (Vol. 5)
sharpening, 26:66 (Vol. 1)
using, 130:76; 160:46 (Vol. 4)
Screws,
case-hardened, 6:84 (Vol. 1)
holes, hiding, 177:22 (Vol. 5)
plugs, 63:39 (Vol. 2)
woodworker’s standards, 11:46 (Vol. 1)
Scrollsawing, scrollsaws, and scrollers,
applique, 88:53 (Vol. 3)
copper panels, 166:16 (Vol. 5)
fretwork, Carl Weckhorst, 85:37 (Vol. 3)
marquetry, 124:58 (Vol. 4)
Marlow Woodcuts, 45:60 (Vol. 2)
patterns, finding, 61:56 (Vol. 2)
puzzles, Russell Greenslade,
119:78 (Vol. 3)
Roy King and Scott Kochendorfer,
59:25 (Vol. 2)
signmaking, 60:40 (Vol. 2)
tips, 41:39 (Vol. 2)
tricks, Rick Hutcheson, 66:66 (Vol. 2);
136:24 (Vol. 4)
Sculptures, Wayne Edwards, 83:43 (Vol. 3)
Shaker furniture, 119:47 (Vol. 3)
book, 54:94 (Vol. 2)
Charles Harvey, 82:43 (Vol. 3)
Thomas Moser, 107:35 (Vol. 3)
Sharpening, 149:68 (Vol. 4)
carving tools, 27:70 (Vol. 1)
hollow-grind, 11:67 (Vol. 1)
lathe 152:92 (Vol. 4)
scraper, 56:60 (Vol. 2)
turning and carving tools, 52:36 (Vol. 2)
waterstones, 10:46 (Vol. 1);
108:12 (Vol. 3); 160:54 (Vol. 4)
Sheet metal basics, 100:8 (Vol. 3)
Sheet goods, choosing, 149:61 (Vol. 4)
Shelving,
planner, 98:68 (Vol. 3)
Shop,
budget, 155:62 (Vol. 4)
cleanup, 12:93 (Vol. 1)
floor finishes, 20:85 (Vol. 1)
habits, 157:70 (Vol. 4)
heating systems, 144:86 (Vol. 4)
40
Shop, continued,
home brews, 44:68 (Vol. 2)
insurance, 45:74 (Vol. 2)
layout, small, 10:54 (Vol. 1)
optimization, 172:90 (Vol. 5)
organization, 166:76 (Vol. 5)
planning, 1:21 (Vol. 1); 151:58 (Vol. 4)
readers’, 60:65 (Vol. 2)
security, 56:62 (Vol. 2)
shortcuts, 149:92 (Vol. 4)
wiring, 8:82 (Vol. 1); 95:66 (Vol. 3);
157:96 (Vol. 4)
workover, 158:76 (Vol. 4); 162:35 (Vol. 5)
Shop class,
Carmen Schifano, 18:30 (Vol. 1)
high school, 89:66 (Vol. 3); 155:84 (Vol. 4)
Signmakers,
Brent and Carol Manley, 62:27 (Vol. 2)
Dave Jordan, 15:36 (Vol. 1)
Silver added to turnings, 79:46 (Vol. 3)
Sliding dovetails, 171:12 (Vol. 5)
how to cut, 101:18 (Vol. 3)
Snowshoes, Carl Heilman II, 48:33 (Vol. 2)
Southwest styles, 37:40 (Vol. 2)
Spacers speed assembly, 190:39 (Vol. 5)
Splinter, wooden supercar, 186:50 (Vol. 5)
Splits, avoiding, 176:21 (Vol. 5)
Spoons, Jonathan Simons, 98:39 (Vol. 3)
Spotted owls, 36:57 (Vol. 2)
Spruce Goose, 106:70 (Vol. 3)
Squaring techniques, 177:48 (Vol. 5)
Stacked-ring vessels, 71:38 (Vol. 2)
Statue of Liberty, history, 141:90 (Vol. 4)
Steam bending wood, 175:52 (Vol. 5)
Steel,
bending basics, 115:12 (Vol. 3)
hardness, 26:110 (Vol. 1)
Steinway pianos, 90:48 (Vol. 3)
Stenciling, 92:14 (Vol. 3)
Stock, how to level glued-up, 59:57 (Vol. 2)
Stop block tips, 182:64 (Vol. 5)
Storage, perforated hardboard hangers,
72:62 (Vol. 2)
Story sticks, 190:70 (Vol. 5)
Strater Hotel, Charlie Schumacher, 105:37 (Vol. 3)
Staves and segments, 126:16 (Vol. 4)
Step-building, deck, 141:16 (Vol. 4)
Straight-line cutting, 172:76 (Vol. 5)
Suede, spray-on, 66:76 (Vol. 2)
Tables
corner connectors, 181:84 (Vol. 5)
Tables, continued,
legs
fixing uneven, 189:30 (Vol. 5)
flared, 190:65 (Vol. 5)
tops,
securing, 181:28 (Vol. 5)
solid-wood, 112:70 (Vol. 3)
Tablesaw,
cuts
troubleshooting, 184:22 (Vol. 5)
burned, 161:14 (Vol. 5)
precise angles, 190:22 (Vol. 5)
safety, 59:60 (Vol. 2);
173:94; 182:80 (Vol. 5)
tricks, 141:96 (Vol. 4)
tuneup, 152:54 (Vol. 4)
Tambour, 32:38 (Vol. 1)
Tapered legs, 81:4 (Vol. 3)
Tapers, accurate, 187:32 (Vol. 5)
Tarnished hardware, cleaning, 148:8 (Vol. 4)
Teaching children woodworking, 178:66 (Vol. 5)
Tearout, eliminate, 165:59 (Vol. 5)
Tenons,
cutting tips, 171:101 (Vol. 5)
faux through-tenons, 180:84 (Vol. 5)
haunched, joinery, 150:42 (Vol. 4)
tuneup with shoulder plane, 183:94 (Vol. 5)
wedged and keyed, 174:94 (Vol. 5)
Threading metal, 118:12 (Vol. 3)
Timber framing, 145:52 (Vol. 4)
Tin punching, how to, 53:42 (Vol. 2)
Tool kit,
basic, 63:76 (Vol. 2)
commonsense, 3:10 (Vol. 1)
Tool marks, eliminate, 167:10 (Vol. 5)
Tool maintenance, 124:55 (Vol. 4)
antiques, 143:20 (Vol. 4)
Totem poles, Peter Wolf Toth, 42:33 (Vol. 2)
Toys and toymakers,
Gus Stefureac, 87:35 (Vol. 3)
by Hank Gorczynski, 53:37 (Vol. 2)
heirloom - Steve Baldwin, 2:41 (Vol. 1)
by Mike Jagielo, 154:46 (Vol. 4)
whirligigs, Andy Lunde, 16:38 (Vol. 1)
Treenware, Roger Sandstorm, 1:70 (Vol. 1)
Trees,
anatomy, 110:47 (Vol. 3)
champion, 29:74 (Vol. 1)
farms, 42:52 (Vol. 2)
identification, 48:46 (Vol. 2)
Trees, continued,
names, 114:37 (Vol. 3)
rings, history, 43:60 (Vol. 2)
Trim,
door and window, 193:40 (Vol. 5)
interior, 117,HI1 (Vol. 3)
tricks from a pro, 193:43 (Vol. 5)
Turning and turners,
abeginning, 179:74 (Vol. 5)
Bert Thompson, 9:36 (Vol. 1)
between centers, 64:52 (Vol. 2)
Bill Hug, 127:18 (Vol. 4)
blanks from trees, 168:102 (Vol. 5)
bowl gouge use, 186:66 (Vol. 5)
bowls, 57:77 (Vol. 2)
finishes, 116:58 (Vol. 3)
from scrapwood, Al Francendese, 68:25 (Vol. 2)
segmented, Galen Carpenter,
127:49 (Vol. 4)
chatterwork, 115:78 (Vol. 3)
Doug Magrath, 188:70 (Vol. 5)
Gail Redman, 97:31 (Vol. 3)
hats, Johannes Michelsen, 91:39 (Vol. 3)
Neil Weston, 25:34 (Vol. 1)
pen-turning basics, 148:80 (Vol. 4)
plates, 101:45:82 (Vol. 2)
stock, 45:88 (Vol. 2)
pyramid point tool, 153:122 (Vol. 4)
Ray Allen, 112:81 (Vol. 3)
rose engine, Fred Armbruster,
110:51 (Vol. 3)
scrapers and parting tools, 189:42 (Vol. 5)
small-scale, Bonnie Klein, 49:25 (Vol. 2)
tagua, 54:54 (Vol. 2)
tools, beginner’s, 59:62 (Vol. 2)
vessel showcase, 41:62 (Vol. 2)
William H. Macy, 150:46 (Vol. 4)
Upholstery, no-sew, 129:49 (Vol. 4)
Uneven legs, fixing, 53:68 (Vol. 2)
Unmet Needs Program of VFW, 169:93 (Vol. 5)
Vacuum-veneering and clamping, 70:76 (Vol. 2)
Vapors, harmful, 39:72 (Vol. 2)
Veneer and inlay, 26:42 (Vol. 1); 114:12 (Vol. 3)
applying, 125:66 (Vol. 4)
bandings, 114:70 (Vol. 3);
Tony Hayden, 122:76 (Vol. 4)
flexible, working with, 4:45 (Vol. 1)
gluing, 98:28 (Vol. 3)
made easy, 179:42; 193:54 (Vol. 5)
41
Veneer and inlay, continued,
small panels, 153:38 (Vol. 4)
storing, 16:26 (Vol. 1)
tubes, 137:22 (Vol. 4)
turned bowls, 68:40 (Vol. 2)
Wagonmaker, Gary Stull, 78:35 (Vol. 3)
Walking sticks,
Theo Fossel, 33:57 (Vol. 2)
Tom Smith, 95:27 (Vol. 3)
Wedges, 88:4 (Vol. 3)
Whispering pines, David Swarey, 51:35 (Vol. 2)
Willow Works, Tehal Virk, 61:23 (Vol. 2)
Wiring, lamp, 88:14 (Vol. 3)
Wood,
characteristics, 137:84 (Vol. 4)
collecting, 126:46 (Vol. 4)
decay, 131:40 (Vol. 4)
defects, 145:26 (Vol. 4)
driftwood, 41:70 (Vol. 2)
drying, 141:26 (Vol. 4)
air-drying, 15:64 (Vol. 1)
Solar wood - Timbergreen Farm,
102:76 (Vol. 3)
figured, 13:42 (Vol. 1); 111:10 (Vol. 3)
found, 176:46 (Vol. 5)
grain, 113:43 (Vol. 3)
matching, 128:20 (Vol. 4)
selection, 94:8 (Vol. 3);
175:62 (Vol. 5)
hardwood,
buying, 153:88 (Vol. 4)
questions, 29:78 (Vol. 1)
identification, 19:72 (Vol. 1);
122:45 (Vol. 4)
look-alikes, 2:96 (Vol. 1); 109:66 (Vol. 3)
mail-order, 161:48 (Vol. 5)
machining, 157:94 (Vol. 4)
medicinal, 57:74 (Vol. 2); 148:65 (Vol. 4)
moisture, 115:37 (Vol. 3); 156:66 (Vol. 4)
movement, 18:83 (Vol. 1); 90:72;
119:43 (Vol. 3); 150:80 (Vol. 4)
pressure-treated, 30:46 (Vol. 1)
rare, 128:46 (Vol. 4)
recycling, 123:80 (Vol. 4)
regional, 150:16 (Vol. 4)
scraps, 155:42 (Vol. 4)
spalted, 148:56 (Vol. 4)
structure and appearance, 155:74 (Vol. 4)
substitutes, 192:52 (Vol. 5)
treating, PEG, 9:46 (Vol. 1)
toxicity, 67:68 (Vol. 2)
42
Wood, continued,
chart, 56:93 (Vol. 2)
used in sports, 39:74 (Vol. 2)
veneer, R.S. Bacon Veneer Co.,
84:56 (Vol. 3)
Wooden landscapes, Jim Shirley & Sons,
32:52 (Vol. 1)
Woodburning, Vicki Schreiner, 117:76 (Vol. 3)
WOOD magazine,
first 25 years, 193:64 (Vol. 5)
shop tour, 80:76 (Vol. 3); 170:62 (Vol. 5)
Wood species,
Ailanthus, 91:13 (Vol. 3)
American chestnut, 125:87 (Vol. 4)
Ash, 10:25 (Vol. 1)
Aspen, 18:29 (Vol. 1)
Avocado, 62:88 (Vol. 2)
Bald cypress, 20:33 (Vol. 1);
112:40 (Vol. 3); 141:44 (Vol. 4)
Balsa, 23:83 (Vol. 1)
Balsam Fir, 110:118 (Vol. 3)
Bamboo, 144:28 (Vol. 4)
Basket oak, 74:96 (Vol. 2)
Basswood, 9:35 (Vol. 1); 78:33 (Vol. 3);
116:115 (Vol. 3);
Beech, 12:27 (Vol. 1); 102:33 (Vol. 3)
Bigleaf maple, 139:20 (Vol. 4)
Birch, 7:37 (Vol. 1)
Black ash, 114:110 (Vol. 3)
Black cherry, 40:25 (Vol. 2); 90:29 (Vol. 3)
Black gum, 113:40 (Vol. 3)
Black locust, 70:85 (Vol. 2)
Black walnut, 35:33 (Vol. 2); 121:102;
155:26 (Vol. 4)
Black willow, 58:25 (Vol. 2)
Boxelder, 105:33 (Vol. 3); 157:14 (Vol. 4)
Bristlecone, 9:86 (Vol. 1)
Bubinga, 78:84 (Vol. 3)
Bur oak, 60:90 (Vol. 2)
Butternut, 55:23 (Vol. 2)
Busera, 98:85 (Vol. 3)
Butternut, 123:102 (Vol. 4)
Cacao, 49:21 (Vol. 2)
California laurel, 32:37 (Vol. 1)
Camphorwood, 8:91 (Vol. 1)
Carob, 5:88 (Vol. 1)
Cascara buckthorn, 72:32 (Vol. 2)
Cedar, 41:22 (Vol. 2)
aromatic, 194:16 (Vol. 5)
Ceiba, 57:84 (Vol. 2)
Cherry, 4:27 (Vol. 1); 146:50 (Vol. 4)
a pro’s secrets, 170:70 (Vol. 5)
Wood species, continued,
Chestnut, 29:37 (Vol. 1)
Chinaberry, 30:90 (Vol. 1)
Cocobolo, 33:33 (Vol. 2)
Cottonwood, 37:31 (Vol. 2)
Cypress, George Olivier, 28:64 (Vol. 1)
Darah Darah, 53:33 (Vol. 2)
Douglas fir, 28:25 (Vol. 1)
Eastern red cedar, 13:31 (Vol. 1);
69:33 (Vol. 2)
Eastern White Pine, 53:35 (Vol. 2)
Ebony, 20:104 (Vol. 1)
Elm, 16:37 (Vol. 1)
English Oak, 18:25 (Vol. 1)
exotics, Keith Stephens, 125:44 (Vol. 4)
Flowering dogwood, 82:41 (Vol. 3)
Ginkgo, 45:17 (Vol. 2)
Goncalo alves, 80:37 (Vol. 3)
Greenheart, 38:88 (Vol. 2)
Gum Arabic, 54:92 (Vol. 2)
Hackberry, 71:23 (Vol. 2)
Hemlock, 26:37 (Vol. 1)
Hickory, 51:33 (Vol. 2)
Holly, 14:33 (Vol. 1)
Honduras Mahogany, 42:31 (Vol. 2)
identification, 19:72 (Vol. 1);
122:45 (Vol. 4)
Ipe, 155:122 (Vol. 4)
Ironwood, Honey Mesquite, 46:91 (Vol. 2)
Jarrah, 19:103 (Vol. 1)
Kauri, 63:91 (Vol. 2)
Kentucky Coffeetree, 141:111 (Vol. 4)
Koa, 27:35 (Vol. 1)
Lacewood, 149:33 (Vol. 4); 76:28 (Vol. 3)
Letterwood, 7:103 (Vol. 1)
Lignum Vitae, 40:23 (Vol. 2)
Live oak, 97:81 (Vol. 3)
Longleaf pine, 135:86 (Vol. 4);
85:35 (Vol. 3)
Madrone, 74:37 (Vol. 2)
Magnolia, 30:29 (Vol. 1)
Mahogany, 153:24 (Vol. 4); 5:27 (Vol. 1)
Manchineel, 94:101 (Vol. 3)
Manzanita, 103:22 (Vol. 3)
Maple, 3:49 (Vol. 1)
coloring, 151:14 (Vol. 4)
figured, 176:76 (Vol. 5)
Meranti, 83:41 (Vol. 3)
Mesquite, 15:23; 31:37 (Vol. 1);
104:33 (Vol. 3)
Mountain laurel, 89:86 (Vol. 3)
Mountain mahogany, 106:27 (Vol. 3)
North American, 61:62 (Vol. 2)
Northern red oak, 34:27 (Vol. 2)
Northern white cedar, 98:37 (Vol. 3)
Oak, 1:77 (Vol. 1); 184:40 (Vol. 5)
quartersawn, 146:20;
156:32 (Vol. 4)
Ohio Buckeye, 117:123 (Vol. 3)
Osage orange, 13:29 (Vol. 1);
129:22 (Vol. 4)
Padauk, 24:25 (Vol. 1); 148:42 (Vol. 4)
Paldao, 27:85 (Vol. 1)
Palmetto, 145:31 (Vol. 4)
Paper birch, 85:18 (Vol. 3)
Para rubber tree, 52:25 (Vol. 2)
Paulownia, 6:81 (Vol. 1)
Pecan, 8:29 (Vol. 1); 108:11 (Vol. 3)
Pernambuco, 2:101 (Vol. 1)
Peroba, 29:33 (Vol. 1)
Persimmon, 136:102 (Vol. 4)
Peruvian walnut, 75:32 (Vol. 2)
Pine,
Pink Ivory, 3:99 (Vol. 1)
Pitch pine, 99:80 (Vol. 3)
Ponderosa pine, 11:27 (Vol. 1)
Port Orford cedar, 102:30 (Vol. 3)
Primavera, 73:90 (Vol. 2)
Purpleheart, 64:91 (Vol. 2)
Quassia, 51:31 (Vol. 2)
Ramin, 56:34 (Vol. 2)
Red Alder, 21:33 (Vol. 1); 96:25 (Vol. 3)
Red pine, 107:31 (Vol. 3)
Redwood,
logging, 6:25 (Vol. 1);
44:21 (Vol. 2); 88:44 (Vol. 3)
Rock elm, 105:30 (Vol. 3)
Sabicu, 37:90 (Vol. 2)
Saguaro, 4:83 (Vol. 1)
Sapele, 28:23 (Vol. 1);
Sassafras, 25:33 (Vol. 1); 109:38 (Vol. 3)
Satinwood, 21:30 (Vol. 1)
Sequoia, 88:30 (Vol. 3)
Shagbark hickory, 124:28 (Vol. 4)
Sitka spruce, 17:31 (Vol. 1);
132:110 (Vol. 4)
Strychnine tree, 65:24 (Vol. 2)
Sugar Maple, 36:31 (Vol. 2);
139:82 (Vol. 4)
Sugar Pine, 119:10 (Vol. 3)
Sumac, 44:75 (Vol. 2)
43
Sweet buckeye, 77:94 (Vol. 3)
Sweet gum, 23:29 (Vol. 1); 93:30 (Vol. 3)
Sycamore, 49:23 (Vol. 2); 111:102 (Vol. 3)
Tamarack, 71:21 (Vol. 2)
Tamo, 26:34 (Vol. 1)
Teak, 22:27 (Vol. 1); 46:33 (Vol. 2)
Thuya, 48:26 (Vol. 2)
Toxic woods, 32:74 (Vol. 1)
Tropical hardwoods, 71:68 (Vol. 2)
Tupelo, 62:25 (Vol. 2)
Turpentine, 68:20 (Vol. 2)
Walnut, 2:77 (Vol. 1); 92:36 (Vol. 3)
Western hemlock, 94:31 (Vol. 3)
Western larch, 92:33 (Vol. 3)
Western red cedar, 19:33 (Vol. 1);
76:31 (Vol. 3)
Western white pine, 87:33 (Vol. 3)
White ash, 64:27 (Vol. 2); 143:16 (Vol. 4)
White oak, 60:33 (Vol. 2)
Witch hazel, 83:38 (Vol. 3)
Yellow birch, 39:33 (Vol. 2); 126:35 (Vol. 4)
Yellow poplar, 15:35 (Vol. 1);
67:21 (Vol. 2); 149:84
Yew, 16:25 (Vol. 1)
Woodworking,
advice, 100:37 (Vol. 3)
basic skills, 183:84 (Vol. 5)
bus, Sheila Dawson, 40:52 (Vol. 2)
class, Mark Tudor, 97:42 (Vol. 3)
I.Q. test, 41:78 (Vol. 2)
schools, 53:64 (Vol. 2); 170:84 (Vol. 5)
shows, 13:94 (Vol. 1)
smarter, 167:68 (Vol. 5)
terms, 2:117; 3:120 (Vol. 1); 149:110;
150:36; 151:100; 152:31; 153:36;
155:100; 156:36; 157:18 (Vol. 4)
trivia, Sears, 74:49 (Vol. 2)
vacations, 6:10; 16:70 (Vol. 1); 99:72;
120:74 (Vol. 3)
videos, 10:89 (Vol. 1)
with kids, 10:66 (Vol. 1)
Woodworking Hall of Fame, 100:43; 108:35; 117:41; 117:42 (Vol. 3); 126:37 (Vol. 4)
Workbench, flatten uneven top, 80:10
World of Disney, 35:56 (Vol. 2)
Tools
Air compressors & accessories, 10:50 (Vol. 1)
compact, tested, 170:18 (Vol. 5)
nailer/compressor kits, 190:30 (Vol. 5)
review, 73:54 (Vol. 2)
Airbrush, using, 49:56 (Vol. 2)
Air-filtration systems, 83:48 (Vol. 3);
120:70 (Vol. 3); 139:76 (Vol. 4);
172:70 (Vol. 5)
Angle Finders, 161:92 (Vol. 5)
Antique tools,
adjustable square, 105:79 (Vol. 3)
adze and bung borer, 96:8 (Vol. 3)
Bailey hand plane, 59:20 (Vol. 2)
barrelmaking, 64:90 (Vol. 2)
bedrock bench planes, 48:84 (Vol. 2)
calipers, 95:74 (Vol. 3)
combination tool holders, 38:81 (Vol. 2)
compass planes, 84:98 (Vol. 3)
crown planes, 76:4 (Vol. 3)
door mortiser, 75:6 (Vol. 2)
double-crank brace, 42:79 (Vol. 2)
dowel/rod turner, 44:74 (Vol. 2)
44
Antique tools, continued,
folding rules, 26:112 (Vol. 1)
hammers, 37:87 (Vol. 2)
hand clamps, 53:87 (Vol. 2)
hand planes, 93:28 (Vol. 3)
hewing ax, 13:22 (Vol. 1)
hollow augers, 74:8 (Vol. 2)
marking gauges, 43:83 (Vol. 2)
miter trimmer, 50:31 (Vol. 2)
molding planes, 29:34 (Vol. 1)
mortise machine, 101:124; 106:14 (Vol. 3)
plow and combination planes,
51:82 (Vol. 2)
prices, 60:24 (Vol. 2)
pump-log tools, 57:86 (Vol. 2)
router planes, 46:90 (Vol. 2)
saw vise, 97:100 (Vol. 3)
shoot board and plane, 63:82 (Vol. 2)
slitting cutter, 81:10 (Vol. 3)
spiral screwdriver, 62:90 (Vol. 2)
Spirit level, 19:82 (Vol. 1)
spokeshaves, 19:100 (Vol. 1)
stand-up plane, 70:18 (Vol. 2)
Stanley #57 core-box plane, 94:20 (Vol. 3)
Antique tools, continued,
Stanley window display, 91:20 (Vol. 3)
transitional planes, 56:96 (Vol. 2)
try squares, 36:80 (Vol. 2)
walking-wheel calipers, 45:86 (Vol. 2)
Bandsaws, 15:50 (Vol. 1)
14”, tested, 185:54 (Vol. 5)
blades, 32:78 (Vol. 1)
carbide-tipped, 174:104 (Vol. 5)
fences, aftermarket, 185:26 (Vol. 5)
guide blocks, 174:32 (Vol. 5)
large, tested, 166:46 (Vol. 5)
review, 38:50; 65:48 (Vol. 2)
riser block installation, 176:24 (Vol. 5)
stationary, tested, 102:50 (Vol. 3)
tested, 51:66 (Vol. 2); 144:74 (Vol. 4)
tuneup, 82:74 (Vol. 3); 172:52 (Vol. 5)
Batteries,
Lithium-Ion, 163:22 (Vol. 5)
nickel-metal hydride, 119:88 (Vol. 3)
Bed-rail hardware, 187:18 (Vol. 5)
Belt/disc sander, tested, 109:60 (Vol. 3)
Belt sanders,
portable, 2:57; 30:54 (Vol. 1)
tested, 100:68 (Vol. 3);
Belt sanding techniques, 25:55 (Vol. 1)
Bench plane basics, 29:38 (Vol. 1)
Benchtop mortisers, tested, 107:58 (Vol. 3)
Benchtop tools, DeWalt, 97:102 (Vol. 3)
update, 100:32 (Vol. 3)
Biscuit joiners, 117:56 (Vol. 3)
Blade and bit cleaners, tested, 158:20 (Vol. 4)
Blades,
10-inch tested, 121:62 (Vol. 4) circular saw, carbide-tipped, 20:60 (Vol. 1)
how they’re made, 111:56 (Vol. 3)
thin-kerf, tested, 34:44 (Vol. 2)
Block plane, how to buy, 160:52 (Vol. 4)
Bow saw, 16:93 (Vol. 1)
Brad nailers, 124:68 (Vol. 4)
cordless, 180:24 (Vol. 5)
tested, 66:30 (Vol. 2); 145:29 (Vol. 4);
162:76 (Vol. 5)
Brushes,
disposable, tested, 96:34 (Vol. 3)
CAD software, 177:62 (Vol. 5)
Carbide-tipped saw blades, tested, 63:40 (Vol. 2)
Carving,
power, 117:52 (Vol. 3)
rotary 92:18 (Vol. 3)
Carving tools, 44:42 (Vol. 2)
attachments, 19:30 (Vol. 1)
rotary, 19:64 (Vol. 1)
Casters, machinery, tested, 157:39 (Vol. 4)
Chisels, bevel-edge, 116:76 (Vol. 3)
Chucks, four-jaw, tested, 160:18 (Vol. 4)
Circular saw,
blades, update, 75:77 (Vol. 2)
review, 38:30; 65:50 (Vol. 2)
rail-guided, tested, 192:62 (Vol. 5)
tested, 141:84 (Vol. 4)
Clamping station, review, 132:102 (Vol. 4)
Clamp-on tool guides, tested, 165:70 (Vol. 5)
Clamps,
one-handed, tested, 139:66 (Vol. 4)
parallel-jaw, 178:78 (Vol. 5)
Quick-grip, 132:100 (Vol. 4)
CNC routers, 165:10 (Vol. 5)
Combination machines, 22:52 (Vol. 1)
Compucarve, tested, 184:82 (Vol. 5)
Cope-cutting sleds, tested, 191:30 (Vol. 5)
Cordless drills,
14.4 volts, 161:70 (Vol. 5)
and circular saw, tested, 137:60 (Vol. 4)
power, 119:40 (Vol. 3)
tested, 42:62 (Vol. 2); 89:56;
119:72 (Vol. 3)
voltage, 79:43 (Vol. 3)
Cordless tools,
batteries, 161:82 (Vol. 5)
myths and facts, 42:21 (Vol. 2)
Cyclone Scrudrill, 46:16 (Vol. 2)
Dadoes
blades & sets, tested, 3:77 (Vol. 1);
46:60 (Vol. 2)
cutting tools, review, 65:46 (Vol. 2)
sets,
6”, tested, 188:50 (Vol. 5)
premium, 108:58 (Vol. 3)
45
Dadoes, continued,
tested, 150:92 (Vol. 4)
Deck anchors, 116:18 (Vol. 3)
Dovetail jigs,
router, 19:34 (Vol. 1)
tested, 134:62; 142:18 (Vol. 4);
175:77 (Vol. 5)
Doweling Jigs, 1:109 (Vol. 1)
tested, 167:16 (Vol. 5)
Drill bits, 11:54 (Vol. 1)
drill bit chart, 91 (Vol. 3)
Forstner, 20:95 (Vol. 1); 41:72 (Vol. 2)
sets, 194:20 (Vol. 5)
types, 149:12 (Vol. 4)
Drill presses, 24:56 (Vol. 1)
benchtop, tested, 180:62 (Vol. 5)
jigs and accessories, 24:26 (Vol. 1)
review, 38:46; 56:66 (Vol. 2)
stationary, review, 136:84 (Vol. 4)
Drills,
and boring tools, 79:4 (Vol. 3)
chucks, quick-change, 127:86 (Vol. 4)
corded, tested, 36:66 (Vol. 2)
cordless, 11:38 (Vol. 1); 38:42 (Vol. 2)
Dust collection, 185:65 (Vol. 5)
attachments, 18:90 (Vol. 1)
calculating, 119:16 (Vol. 3)
central, 17:48 (Vol. 1)
cyclones, tested 153:94 (Vol. 4)
hoods, tested, 155:16 (Vol. 4)
masks & respirators, 6:47 (Vol. 1)
remote controls, 182:22 (Vol. 5)
systems, setting up, 96:12 (Vol. 3)
tested, 54:42 (Vol. 2); 96:58
(Vol. 3); 182:66 (Vol. 5)
vacuums, 26:56 (Vol. 1)
review, 73:68 (Vol. 2);
129:66 (Vol. 4)
tool-triggered, tested,
183:104 (Vol. 5)
Engravers, high-speed, tested, 103:52 (Vol. 3)
Fasteners,
threaded, 69:64 (Vol. 2)
Finishing products, 47:42 (Vol. 2)
Folding rule, 21:91 (Vol. 1)
Gauge blocks for fast setups, 172:106 (Vol. 5)
Glues,
epoxy, 8:60 (Vol. 1)
46
Glues, continued,
guide to woodworking, 156:59 (Vol. 4)
reference guide, 107:46 (Vol. 3)
tested, 79:70 (Vol. 3); 159:8 (Vol. 4)
water-resistant tested, 45:30 (Vol. 2)
woodworking, tested, 157:80 (Vol. 4)
Glue-up accessories, 168:94 (Vol. 5)
Hammers, 107:8 (Vol. 3)
Handsaws, 106:33 (Vol. 3)
Hand tools,
Japanese, 9:50 (Vol. 1)
pull saws, tested, 156:14 (Vol. 4)
power-tool user, 171:80 (Vol. 5)
problem-solving, 192:54 (Vol. 5)
products, 47:18 (Vol. 2)
Hollow mortise chisels, 156:100 (Vol. 4)
Hold-downs, tested, 176:78 (Vol. 5)
Hot new tools (Vol. 5)
2006, 167:80 (Vol. 5)
2007, 174:70 (Vol. 5)
2008, 181:50 (Vol. 5)
2009, 188:29 (Vol. 5)
2010, 195:68 (Vol. 5)
HVLP sprayers, tested, 60:79 (Vol. 2);
106:50 (Vol. 3); 169:72 (Vol. 5)
Idea Shop 5; tools, 151:8 (Vol. 4)
Impact drivers, 12-volt, tested, 169:106 (Vol. 5)
Incra jig, how to, 58:32 (Vol. 2)
Incra Miter 5000, review, 134:22 (Vol. 4)
Jigsaws, 5:32 (Vol. 1)
tested, 71:25 (Vol. 2); 84:44 (Vol. 3)
tune up, 91:74 (Vol. 3)
Jointers,
6 inch,
review, 135:60 (Vol. 4)
tested, 189:54 (Vol. 5)
8 inch, tested, 168:69 (Vol. 5)
12 inch, tested, 191:66 (Vol. 5)
knife adjustment, 165:36 (Vol. 5)
review, 56:68; 38:66 (Vol. 2)
tips, 135:66 (Vol. 4)
troubleshooting, 168:14 (Vol. 5)
Laser levels, tested, 154:14 (Vol. 4)
Lathes, 6:68 (Vol. 1)
chucks, 14:103 (Vol. 1)
mid-size, tested, 147:98 (Vol. 4)
mini, tested, 101:50 (Vol. 3);
179:84 (Vol. 5)
Lathes, continued,
review, 38:70; 73:60 (Vol. 2)
tuning, 101:14 (Vol. 3)
Layout tools, 25:66 (Vol. 1)
Leveling legs, 6:75 (Vol. 1)
Lighting,
shop, 132:102 (Vol. 4)
Logging sawmills, 66:56 (Vol. 2)
Loose-tenon, tested, 177:66 (Vol. 5)
Machinery setup, 189:22 (Vol. 5)
Measuring and marking 180:70 (Vol. 5)
Miter clamps, 93:66 (Vol. 3)
Miter gauge (Vol. 5)
& sleds, tested, 179:64 (Vol. 5)
tuneup, 179:24 (Vol. 5)
Miter guides, 133:54 (Vol. 4)
Mitersaws, 12:52 (Vol. 1)
12 inch,
compound, 131:68 (Vol. 4)
tested, 178:86 (Vol. 5)
compound, tested, 104:56 (Vol. 3)
lasers, tested, 159:10 (Vol. 4)
sliding, tested, 154:74 (Vol. 4)
compound, tested, 87:40 (Vol. 3)
stand, portable, 118:66 (Vol. 3)
tested, 50:48 (Vol. 2); 143:90 (Vol. 4)
tuneup, 82:79 (Vol. 3)
Mobile bases, 110:80 (Vol. 3)
Moisture meters, 127:70 (Vol. 4)
Mortisers, benchtop, tested, 156:78 (Vol. 4)
Multi-machine accessories, 10:64 (Vol. 1)
Nail guns,
23-gauge pinners tested, 164:38 (Vol. 5)
Nails, 85:4 (Vol. 3)
Oscillating spindle sanders, tested, 72:78 (Vol. 2)
Outdoor glues, 190:72 (Vol. 5)
Palm drivers, tested, 173:98 (Vol. 5)
Panel-raising bits, 146:16 (Vol. 4)
Panel carriers, tested, 177:26 (Vol. 5)
Pantograph, 23:58 (Vol. 1)
Planers,
benchtop, tested, 173:74 (Vol. 5)
hand-held, tested, 18:70 (Vol. 1)
portable, 120:56 (Vol. 3); 133:16 (Vol. 4)
tested, 51:54 (Vol. 2);
92:74 (Vol. 3); 148:68;
151:34 (Vol. 4)
Planers, continued,
tune up, 91:79 (Vol. 3)
review, 38:54; 56:78 (Vol. 2)
snipe, 120:94 (Vol. 3)
tuneup tips, 173:37 (Vol. 5)
Planer/molders, tested, 62:62 (Vol. 2)
Plate joiners, 23:44 (Vol. 1)
Plywood edging bits, 163:10 (Vol. 5)
Pocket-hole jigs, tested, 152:62 (Vol. 4)
Power-carving bits, 77:19 (Vol. 3)
Power planers, tested, 153:12 (Vol. 4)
Power tools,
basic, 190:34 (Vol. 5)
five quick fixes, 177:82 (Vol. 5)
portable,
precision, 174:58 (Vol. 5)
consumer vs. professional, 47:58 (Vol. 2)
Radial arm saws, 17:42 (Vol. 1)
buying guide, 116:88 (Vol. 3)
review, 38:34; 73:62 (Vol. 2)
tuneup, 82:69 (Vol. 3)
Radio/battery chargers, 162:22 (Vol. 5)
Respirators, 40:32 (Vol. 2)
Right-angle braces, 193:22 (Vol. 5)
Rip fences,
tablesaw,
replacement, 29:65 (Vol. 1)
tested, 155:52 (Vol. 4)
Rolling workshop storage, 167:28 (Vol. 5)
Routers,
bits, 8:50 (Vol. 1)
bird’s-mouth, 144:20 (Vol. 4)
box-slotting, 184:24 (Vol. 5)
carbide, tested, 75:42 (Vol. 2)
care, 126:56 (Vol. 4)
chamfer, 118:34 (Vol. 3)
chart, 73 (Vol. 2)
dovetail, 127:22 (Vol. 4)
drawer-lock bit, 129:18 (Vol. 4)
finger joint, review, 98:32 (Vol. 3)
flush-trim, review, 136:32 (Vol. 4)
Jesada, update, 100:30 (Vol. 3)
lock miter, review, 86:10 (Vol. 3)
47
Routers, continued,
multi-profile, reviewed,
122:18 (Vol. 4)
premium vs. low-cost,
155:18 (Vol. 4)
rabbeting bit set, 109:14 (Vol. 3)
rail-and-stile, review, 89:46 (Vol. 3)
raised-panel, setups, 75:4 (Vol. 2)
vertical, 95:16 (Vol. 3)
replaceable cutter, 177:84 (Vol. 5)
round-over, review, 101:91 (Vol. 3)
rule joint, 103:76 (Vol. 3);
181:22 (Vol. 5)
spiral bit review, 132:26 (Vol. 4)
types, 151:38 (Vol. 4)
cordless, 137:30 (Vol. 4)
DIY vs. pro, 159:12 (Vol. 4)
how-to table mount, 102:18 (Vol. 3)
fixed base, 170:48 (Vol. 5)
tested, 105:70 (Vol. 3)
kits, multi-base, 159:68 (Vol. 4)
tested, 184:70 (Vol. 5)
lifts, tested, 142:80 (Vol. 4); 171:74 (Vol. 5)
mid sized plunge, tested, 99:58 (Vol. 3)
monster, tested, 164:74 (Vol. 5)
plunge, 21:34 (Vol. 1); 38:62 (Vol. 2)
basics, 123:56 (Vol. 4)
tested, 149:86 (Vol. 4)
product testing, 1:53 (Vol. 1)
review, 56:72 (Vol. 2); 126:68 (Vol. 4)
slot cutters, 138:34 (Vol. 4)
speed chart, 186:30 (Vol. 5)
table,
review, 122:66 (Vol. 4)
how to choose, 159:88 (Vol. 4)
how to mount, 151:70 (Vol. 4)
power switches, 189:28 (Vol. 5)
upgrades, 164:92; 192:24 (Vol. 5)
table-mounted, 192:26 (Vol. 5)
tested, 33:64 (Vol. 2); 81:56 (Vol. 3);
138:84 (Vol. 4)
trim, 113:72 (Vol. 3)
tested, 177:44 (Vol. 5)
Rust, removers, tested, 154:87 (Vol. 4)
Safety,
glasses, 24:64 (Vol. 1)
hearing protection, 7:59 (Vol. 1)
tested, 184:90 (Vol. 5)
lathe, 94:24 (Vol. 3)
owner’s manual, 82:84 (Vol. 3)
push sticks, 107:44 (Vol. 3)
48
Safety, continued,
scrollsaw, 95:97 (Vol. 3)
woodturning gouge, 122:15 (Vol. 4)
Sanders,
belt,
care, 28:76 (Vol. 1)
& disc, tested, 158:80 (Vol. 4)
stationary, review, 65:58 (Vol. 2)
detail, tested, 74:44 (Vol. 2);
165:92 (Vol. 5)
disc sanders, tested, 146:65 (Vol. 4)
drum, 130:54 (Vol. 4)
finishing,
oscillating spindle, 112:64 (Vol. 3)
palm, 7:74 (Vol. 1)
pneumatic, 110:16 (Vol. 3)
random-orbit, 123:74 (Vol. 4)
and jigsaw, Bosch, 36:51 (Vol. 2)
discs, 152:72 (Vol. 4)
tested, 59:42 (Vol. 2);
90:50 (Vol. 3);
145:64 (Vol. 4);
186:56 (Vol. 5)
spindle, 195:24 (Vol. 5)
Sandpaper, choosing, 20:50 (Vol. 1)
Saw-blade manufacturing, 22:60 (Vol. 1)
Sawhorse, tested, 142:70 (Vol. 4)
Sawmills reviewed, 125:76 (Vol. 4)
Screw drills, 41:20 (Vol. 2)
Screws,
chart, 82 (Vol. 3)
modern, 191:41 (Vol. 5)
Scrollsaws, 8:54; 28:38 (Vol. 1)
review, 38:58; 56:74 (Vol. 2)
tested, 45:68 (Vol. 2); 91:50 (Vol. 3)
Shapers, tested, 86:44 (Vol. 3)
Sharpening,
carbide blades, 22:80 (Vol. 1)
chain saw, 20:99 (Vol. 1)
diamond stone, 23:50 (Vol. 1)
jointer/planer knives, 24:74 (Vol. 1)
systems, 186:40 (Vol. 5)
water-cooled, tested, 146:84 (Vol. 4)
Sheet goods fasteners, 179:80 (Vol. 5)
Shop products, 55:54; 56:50; 65:34 (Vol. 2);
76:48 (Vol. 3)
Shop products, continued,
heaters, 72:65 (Vol. 2)
radiant, update, 81:24 (Vol. 3)
stereo system, 177:18 (Vol. 5)
Shopsmith vs. Total Shop, 35:35 (Vol. 2)
Shoulder planes, tested, 183:90 (Vol. 5)
SketchUp, 189:64 (Vol. 5)
Specialty clamps, 162:63 (Vol. 5)
Splitters, tablesaw, tested, 155:60 (Vol. 4)
Spindle shapers, tested, 39:56 (Vol. 2)
Staplers, tested, 66:30 (Vol. 2)
Steel rules, tested, 178:24 (Vol. 5)
Stepped dowels, 162:88 (Vol. 5)
Switches, foot-operated, 123:26 (Vol. 4)
Tablesaws, 4:55; 32:56 (Vol. 1)
accuracy, 187:40 (Vol. 5)
alignment block, 178:12 (Vol. 5)
blades (Vol. 5)
general-purpose, tested
181:42 (Vol. 5)
retest, 183:44 (Vol. 5)
selection, 165:22 (Vol. 5)
under $50, 194:58 (Vol. 5)
cabinet-style, tested, 98:58 (Vol. 3);
151:74 (Vol. 4)
fences, review, 73:66 (Vol. 2)
hybrid, tested, 187:50 (Vol. 5)
jigs, 151:80 (Vol. 4)
mid-priced, 163:76 (Vol. 5)
molding cutters, 177:74 (Vol. 5)
purchasing, 183:62 (Vol. 5)
Ryobi BT3000, update, 54:88 (Vol. 2)
review, 38:38; 56:76 (Vol. 2)
SawStop, 131:14 (Vol. 4)
cabinet saw, 165:32 (Vol. 5)
tenoning jigs, tested, 152:10 (Vol. 4);
193:69 (Vol. 5)
tips and techniques, 174:82 (Vol. 5)
tune up, 2:8 (Vol. 1); 91:66 (Vol. 3)
Tape for every job, 170:30 (Vol. 5)
Taiwanese made tools, 99:41 (Vol. 3)
Thicknessing machines, 13:56 (Vol. 1)
Tool collecting,
getting started, 18:50 (Vol. 1)
handsaws, 3:100 (Vol. 1)
hand tools, preserving, 12:48 (Vol. 1)
Old-Newfangled woodworking machinery, 4:35 (Vol. 1)
Tool collecting, continued,
Stanley No. 1, 1:76 (Vol. 1)
Stanley No. 45, 14:28 (Vol. 1);
110:10 (Vol. 3)
Tools,
editor favorites, 179:28 (Vol. 5)
innovations, 193:58 (Vol. 5)
new 2005, 160:82 (Vol. 4)
save money, 157:20 (Vol. 4)
testing procedures, 61:30 (Vol. 2)
tune-up, 150:74 (Vol. 4)
used, buying guide, 167:44 (Vol. 5)
Transporting wood, inflatable roof rack,
132:100 (Vol. 4)
Vises,
buyer’s guide, 147:88 (Vol. 4)
Wet-wheel grinders, tested, 77:35 (Vol. 3)
Wood putties, tested, 69:40 (Vol. 2)
Workshop helpers, 47:76 (Vol. 2)
Workshop stocking stuffers, 48:60 (Vol. 2)
Woodturning,
skew chisel use, 183:70 (Vol. 5)
spindle, tools, 6:79 (Vol. 1)
tools, 14:58 (Vol. 1)
must have, 148:98 (Vol. 4)
small turnings, 74:10 (Vol. 2)
49

Projects

Transcription

Similar documents

Alphabetical List Of File Extensions