docOne Piece Domeless Acrylic Shower Stall
download 
Report Transcription
One Piece Domeless Acrylic Shower Stall
Melrose 3 36" x 36" x 80" Melrose 4 48" x 37" x 80" Melrose 5 60" x 36" x 80" One Piece Domeless Acrylic Shower Stall Features • Low 4" threshold for easy entry and exit • Built in acrylic towel bar • Generous shelving • Available with or without seat option • Available in centre drain, left end drain or right end drain • Includes chrome floor drain MEL3 • 36" x 36" x 80" • 914 mm x 914 mm x 2032 mm MEL4 LS / RS • 48" x 37" x 80" • 1219mm x 940mm x 2032 mm MEL5C LS / RS • 60" x 36" x 80" • 1524 mm x 914 mm x 2032 mm MEL5 LS / RS • 60" x 36" x 80" • 1524 mm x 914 mm x 2032 mm Melrose Series One Piece Acrylic Showerstall Shower Base • Vacuum formed acrylic reinforced with fiberglass • Scratch, stain and fade resistant high gloss finish • FD2 chrome drain is included on all models • Features an acrylic towel bar and 6 large shelves MEL3 • 1 Piece Shower Stall General Specifications Average weight: Shower Stall Drain opening diameter Drain to floor clearance Optional Accessories • Mirolin Swing Shower Door SD 31 is designed for the Melrose 3 • Mirolin Two Panel Bypass Shower Door BD 44 and Fixed Panel Pivot Door FD 44 are designed for the Melrose 4 • Mirolin Two Panel Bypass Shower Door BD 56 and Fixed Panel Pivot Door FD 56 are designed for the Melrose 5 128 lbs 3 ¼" 1 ¼" 58 kg 83 mm 44 mm MEL4 LS / RS • 1 Piece Shower Stall with Seat MEL4 • 1 Piece Shower Stall without Seat General Specifications Average Weight: Shower Stall Drain Opening Drain to floor clearance 143 lbs 3 ¼" 1 ¼" 65 kg 83 mm 44 mm Meets or Exceeds the Following Specifications: • CAN/CSA B45 Series • CAN/ULC-S102.2-M88 Flame Spread FRP laminate rating MEL5C LS / RS • 1 Piece Shower Stall With Seat, Centre Drain MEL5C DS - 1 Piece Shower Stall, Dual Seat, Centre Drain MEL5C - 1 Piece Shower Stall, Centre Drain MEL5 LS/RS - 1 Piece Shower Stall with Seat End Drain MEL5L/R- 1 Piece Shower Stall, End Drain General Specifications Average weight: Shower Stall Drain opening Drain to floor clearance 160 lbs 3 ¼" 1 ¼" 73 kg 83 mm 44 mm NOTES: Shower to be installed on the floor supported by the 2 feet and front edge. Shim if required to level the shower for adequate drainage. Mirolin Industries Corp 60 Shorncliffe Road, Toronto, ON M8Z 5K1 [email protected] T 416 231 5790 F 416 231 0929 800 MIROLIN (647 6546) 800 463 2236 Important: Dimensions of fixtures are nominal and may vary ± 6 mm (¼"). These measurements are subject to change at Manufacturer’s discretion. UP C C R © Copyright 2010 Mirolin Ind. The Copyright includes all content on the document.
