Underdeck Ceiling ,Kits, Installation, Shipping

Underdeck Ceiling ,Kits, Installation, Shipping
No Other Under Deck Ceiling Offers All These Advantages.
The Magnolia Under Deck Ceiling Kit is custom made for your
home.
Cantilevers and odd angles are in the normal course of business for us.
Individual Panels are Easily Removed For Access.
1/4
Underdeck Ceiling ,Kits, Installation, Shipping
Ease of remove
Underdeck
access
Ceiling
is
Kit.
of
thepanel,
primary
considerations
ofthe
theMagnolia
Magnolia
simply
theone
nearest
When
access
doengineering
is
the
needed
work, to
and
the
snap
space
theabove
panel
back
into place.
Ceiling,
The Magnolia Underdeck Kit System is Pitched Independently of
the Deck Above.
Magnolia's installation procedure calls for a True Level Line to be established around
the ceiling's perimeter. This line, independent of the deck above, guides the level and
pitch of the Magnolia Ceiling.
Often deck floors are out of level or sagging , as shown here.
A ceiling attached directly to this deck will reflect the sag. Water and debris will
accumulate in the low spots causing leaks between the panels and also steadily
increasing weight. This is the primary cause of underdeck failure.
Magnolia's Gutter is pitched, as well as the ceiling.
A sufficient pitch is essential to good drainage, yet some underdeck designs can not
incorporate slope into their gutters.
The Magnolia System Offers a Broad, Unimpeded Flow to the
Gutters.
Some systems direct the water to narrow troughs alongside the vaulted panels, or down
panels that have supports or spreaders across the direction of flow. In both cases there
is increased possibility of debris accumulation. Again, this is the primary cause of
underdeck failure.
Magnolia's panels can span 23 1/2 feet.
2/4
Underdeck Ceiling ,Kits, Installation, Shipping
Panels 10 feet and over require support along their length. Magnolia has engineered
latches that attach to the joists for support. These latches are designed to release for
easy panel removal. They are also adjustable to accommodate any unevenness that may
develop in the deck above.
Magnolia's Screen/Overflow Box Option
The Screen/Overflow box attaches to the end, back side, or bottom of the gutter (as
pictured here). With this installed the downspout can be located on the outside of the
perimeter. This accommodates the installation of screens, knee walls, windows, etc. In
the event that the system is attached to an underground drain, and that drain stops up,
the trap door on the Overflow box opens and allows the water to escape rather than
back up onto the ceiling.
The Magnolia System is Manufactured from Aluminum
Three Materials are in common use; Steel, Vinyl and Aluminum. Aluminum is both
lightweight and stromg. It will not rust, nor will it become brittle with exposure to the
elements. Twenty eight colors are readily available.
3/4
Underdeck Ceiling ,Kits, Installation, Shipping
A Few Words About Ventilation
If you are concerned about moisture above your panels, or if the spacing between your
deck boards is less than 3/16 inch, you may be a candidate for our optional vents. Our
vents are designed to be waterproof, so they can be installed anywhere on the ceiling. A
location above a fan is helpful.
4/4