kinetrol.ps, page 1-52 @ Normalize ( Kinetrol 52pp )

Transcription

Kinetrol Vane Actuators
Single moving part
Simplest and most reliable mechanism for
quarter-turn rotary actuation.
Certificate No. FM22163
Kinetrol's rigorous quality
program is approved to ISO
9001:2000 and AS/EN 9100
ensuring that each unit is
manufactured to the highest
standards.
Direct mounting control modules
Fail-safe spring returns, limit switches,
positioners, solenoid valves, all just bolt on
direct, no brackets needed.
No cranks or gearing
No power loss or backlash - allows accurate
positioning.
Durable corrosion resistant finish
Kinetrol Actuators, Springs
and Accessories are now
approved up to ATEX
Category 1.
Long maintenance-free life
Up to 4 million operations guaranteed.
Compact - space saving - efficient
Best torque/size package available, fast
operating speeds, best air consumption,
proven design.
Hundreds of thousands of units
in trouble free service all over the world.
Choice of male or female output drive
square - easy to interface to
application
Applications
Operation or positioning of ball, butterfly and plug valves, ventilation dampers and automatic
doors. Uses also include movement and positioning of components during manufacture - in fact
anything that needs to be turned through 90° or less, automatically or by remote control.
1
For ordering codes see page 38
For catalogue index see page 50
I/P Controller
4 - 20mA electrical signal
controls main air supply to
pneumatic positioner as
alternative to air signal
control (details page 13).
EL Electropneumatic
positioner
A single unit gives smooth
accurate control in response
to a 4 to 20mA signal. Limit
switch and angle retransmit
options in same housing
(details page 15/16).
Clear Cone Position
Monitor
Gives 360° and overhead
position indication, available
on actuator and EHD models
05, 07, 09 and 10, limit
switch boxes from 05 and on
AP and EL positioners
(details page 6).
Universal Limit Switch Box
Weather tight unit with up to
4 micro-switches for remote
position indication or control
use. Optional switches for
flame proof / explosion proof
needs and high visibility
Clear cone position monitor
(details page 7/8).
Spring Return Unit
Clock type spring gives
reliable fail safe operation
with high torque output
throughout spring stroke, yet
has easy adjustment to suit
application (details page
3/4/5).
180° Converter
Compact units give constant
torque output through up to
200° travel (details page
17/18).
ISO Adaptor
The patented ISO adaptor
provides easy conversion
from a Kinetrol male drive to
an ISO flange interface for
ultimate mounting flexibility
(details page 22).
AP Positioner
3 - 15psi (0.2 to 1 bar) air
signal controls main air
supply to TURN, STOP or
HOLD the actuator vane in
proportional response to
that air signal. Limit switch
and
angle
retransmit
options (details pages
11/12).
Modular ‘add on’
control units
Visual Indicator
Gives visual indication of
valve position, as standard
except OMO, 08, 16, 18, 20
and 30.
3 Stop Positioner
Provides two endstop
positions and a mid-range
setpoint anywhere within
the 90° span. Easy setpoint
adjustment and integral
position feedback options
(details page 14).
Manual Override Square
Most
actuators
and
combination assemblies
have a square drive shaft
(except
those
with
positioners) extension at
the top useable for
emergency
operation
(details page 19/20).
Solenoid
Optional integral pneumatic
solenoid
valve
for
actuators. Various types of
electrical, environmental
and
explosion
proof
requirements covered
(details page 6).
Actuator
15 sizes covering torque
range 5 lbf in (0.5 Nm) to
168,000 lbf in (19140 Nm).
Operating air pressure
range 20 psi (1.4 bar) to
100 psi (7 bar). Adjustable
stops standard. Restricted
travel stops and DIN/ISO
versions available for most
models (details pages 23 to
37).
Gearbox
Geared manual override on
all models from 05 to 16
inclusive (details page 21).
Mounting Bracket
A comprehensive range of
brackets provides for most
ball, plug and butterfly
valves (details page 41).
2
Kinetrol Vane Actuators
Lowest Torque Loss
Typically 20% through 90° yields extra torque
through spring stroke - enables the selection
of smaller actuators (see diagram)
Reliable low stress range clock type spring
Separate housing for modular assembly
easily retrofitted
Sealed, non-breathing housing
Protects spring in corrosive environments
Adjustable pretension for 'balanced' air
and spring stroke torques
Various
combinations
available
for
balanced/optimised torques at various air
pressures
Keeper plates available to ensure safe
handling of pretensioned springs
All models available with ISO/DIN female
drive and mounting
(except models 01 & 02)
Spring housing cut away
The diagram shows the torque
requirement of a typical ball
valve under normal conditions.
The typical torque output
characteristics of Kinetrol and
Rack and Pinion
actuators,
both sized to overcome the
valve's breakout torque, are
also illustrated. The graphs
demonstrate that the Kinetrol
actuator will exceed the torque
requirement of the valve
throughout the entire stroke
whilst the rack and pinion unit
will fail to reseat the valve.
The higher torque losses
associated with the rack and
pinion actuators (torque loss
can be as high as 70%) dictate
the selection of larger units to
ensure complete reseating.
3
Springs guaranteed against failure for
lifetime of actuator.
Pretension Setting
Spring units are available for either clockwise or
counter clockwise spring action. For spring unit
alone direction is determined looking down at
the unit from the end opposite to that which
interfaces with an actuator.
Factory assembled actuator/spring return
assemblies have the spring pretension set for
'balanced' torque output when the actuator is
operated by air at 80psi (5.5bar).
Factory assemblies can be preset for different
air pressures below 80psi (5.5 bar) on request.
Suffix - 020 = clockwise
Suffix - 030 = counter clockwise
Spring return units supplied separate from
actuators are also pretensioned for 80psi (5.5
bar) air operation unless otherwise stated.
Direction of actuator/spring assemblies is
determined by looking at whole assembly from
non-output end.
Keeper Plates
Asymmetrical Torque Applications
These are provided on all pretensioned spring
return units supplied separate from actuators.
They are also available as spare parts.
If high torque is required in one direction and
lower torque in the other direction this can be set
up easily by changing spring pretension to be
higher or lower as required. Air stroke torque will
always be double-acting torque (at air pressures
available) less spring pretension torque.
A keeper plate must always be used to restrain
spring tension whenever a spring unit case is
dismantled.
Low air pressure applications
Materials specifications
If air pressure available for actuator operation
is less than 50psi (3.5 bar) 'balanced' torque
output on air and spring strokes is still possible
by using a spring return unit from a smaller
actuator size. Listed below are factory
assembled options of this kind.
Spring Casing Models 01-12 pressure die-cast
Replace the '*' used in ordering codes below
with a '2' (clockwise) or '3' (counter clockwise)
depending on direction of spring action
required.
Modular ‘add on’
control units
Direction of Spring Action
Finish
Spring
Square
Mount Holes
in BS1004 zinc alloy. Models 14,
16, 18, 20 & 30 aluminium alloy
LM25.
Epoxy stove enamel.
Clock type spring steel.
Steel, zinc plated.
Same as matching actuator
except model 01, low pressure
combinations & ISO drive
versions. (see page 43).
See pages 47 & 48 for full torque details on all models
Ordering Code
Description
030-1*0-5600
050-1*0-5300
070-1*0-4000
080-1*0-4100
090-1*0-4200
100-1*0-5800
120-1*0-4300
120-1*0-4400
140-1*0-4900
140-1*0-5000
160-1*0-6000
03 actuator with one 02 spring unit
12 actuator with two 09 spring units
16 actuator with one 14 spring
unit and one 12 spring unit
20 actuator with three 16 spring units
30 actuator with four 16 spring units
30 actuator with five 16 spring units
160-1*0-6100
180-1*0-7000
200-1*0-7200
200-1*0-7300
300-1*0-7600
300-1*0-7700
300-1*0-7800
4
Female Drive Units
Simple, elegant direct-mount interface for most
valves
Multiple ISO mounting flange hole drillings for
each model
Large ISO/DIN compatible ‘star’ drive for each
model (up to size 14)
Leak tell-tale/relief slots in mounting face
Female serrated insert drive options available
for maximum direct mount flexibility
Keeper plates available to ensure safe handling
Same reliable, long-life, fully sealed spring unit
as on male-drive units.
Torques are identical to standard spring torques and
can be found on page 47.
Female star drive spring fail-safe are ordered by
adding an 'F' to the DIN/ISO code.
Direction of Spring Action
Female spring units are available for
either clockwise or counter clockwise
spring action. Although a female drive
spring is mounted below the actuator
direction is still determined looking down
at the top of the assembly from the nonoutput end.
Suffix - F020 = clockwise
Suffix - F030 = counter clockwise
Female serrated insert drive
models
Various female springs are available
with insert drives to give maximum
flexibility when mounting and includes
the following features:
- Can accommodate large diameter
valve stems
- Deep hole in shaft for long valve
stems
- Precision stainless steel inserts
- Common internal drive shapes
available
- Same spring can be used with
different valve type / sizes
- 48 teeth allow many different
orientations
5
Serrated drive spring fail-safe actuators are ordered
by adding an 'S' to the DIN/ISO code (available on
models 05,07 and 09).
For models with alternative flange drillings use "8" &
"9" in spring code for clockwise and anti-clockwise
action respectively, e.g. 051F180 for F04 flange
drilling.
Low Air Pressure Models
Ordering Code
Description
031F(or S)1*0-5600
051F(or S)1*0-5300
071F(or S)1*0-4000
081F(or S)1*0-4100
091F(or S)1*0-4200
101F1*0-5800
121F1*0-4300
121F1*0-4400
141F1*0-4900
141F1*0-5000
161F1*0-6000
16 actuator with one 14 spring
unit and one 12 spring unit
30 actuator with four 16 spring units
30 actuator with five 16 spring units
161F1*0-6100
181F1*0-7000
201F1*0-7200
201F1*0-7300
3011*0-7600
3011*0-7700
3011*0-7800
Other Low pressure spring units are available - refer to
Kinetrol literature TD121.
See pages 47 & 48 for torque details.
Clear Cone Monitors
& Solenoid Valves
Clear Cone Monitor
Optional CLEAR CONE provides all round high
visibility position monitoring on all limit switch boxes
except code -003 type, 02/03 and positioner models.
A colour coded monitor is sealed inside a robust, clear
polycarbonate cover.
To order, add suffix 'M' to ordering codes
eg -004M
For highly corrosive environments special cover
materials are available. Contact Kinetrol for details.
Conductive ATEX approved versions available Contact Kinetrol for details.
Installation details see page 44
Solenoid Valves
As an option KINETROL actuator sizes 03 to 14 can
be supplied with integral solenoid valves with NAMUR
interface. Air is ported through the actuator body via
an adaptor plate so no external tubing is necessary.
Standard optional solenoid valves can be converted
to 5 or 3 port versions by changing valve body plate
supplied with the unit.
Specification
Coil voltages
AC: 50/60Hz
24, 115 & 230 volts
DC: 24 Volts
For other voltages contact
Kinetrol
Electrical
connection
DIN 43650 plug with Pg11 cable
gland (6-8mm dia) as standard
Manual Override
Extra to order
Exhaust silencers
/ flow regulators
Extra to order
Hazardous areas
Certified solenoids are
available as extras to order
Environmental
Protection
To IP65 as standard
Minimum air
supply
2 bar
Single solenoid, spring return, interchangeable
3 or 5 port, NAMUR interface. Most brands of
NAMUR interface solenoid valve can be
supplied to special order.
6
180 Degree pneumatic
rotary actuator
Simple compact unit
No external moving parts
Unique linkage design
converts to 180° travel
Constant gear-up ratio through travel range
Hence constant output torque
Rolling contact linkage mechanism
Ensures low wear, long life, low friction
Linkage sealed for life
Protected from the environment, long
maintenance free life.
Compatible with all Kinetrol modules
Direct mounted spring returns, limit switch
boxes, positioners etc.
Adjustable endstops
Giving up to 200° of travel
Operation
KINETROL'S 180° actuator is produced by adding a 2.1 step-up linkage onto the output shaft of well
proven 90° vane actuators.
Factory fitted, direct mount linkage units are available to suit model 02, 03,05,07,09,12,14 and 16
actuators, giving a neat single unit with no mount kits or brackets. The linkages unique geometry gives
constant 2:1 step-up so that the output torque may be constant throughout the actuator's travel.
The all-steel mechanism of the linkage employs rolling contacts to minimise frictional losses and wear,
and to maximise life. The linkage is lubricated for life, and encased in a robust fully sealed die cast zinc
alloy casing. Exterior surfaces are protected by a corrosion resistant epoxy stove enamel finish.
Standard adjustable endstops on the 90 degree actuator can be used to set the angle of travel. The
other end of the 90 degree actuator allows the full range of Kinetrol modular accessories to be fitted
directly.
120 degree actuators are also available for the above model range.
Ordering Codes
To order a 180° actuator, add a '1' to the end of the code for the 90° actuator on which it is based.
Example:
To order an 070 cw spring return actuator plus 180° linkage, use code: 070-1201.
17
180 Degree pneumatic
rotary actuator
Metric Units
ØK
B
C
A
English Units
N holes x T thread
x D Deep x PCD
Mounting holes are aligned
with actuator interface
G x S long
Output square is shown at
limit of travel (orientation is
offset 45° to actuator shaft
N.B. Weights are inclusive of actuator and 180 degree
assembly
Double Acting Torques / Metric Units Nm
Actuator Model
1.4
2.0
2.8
3.5
Pressure (bar)
02-1001
03-1001
05-1001
07-1001
09-1001
12-1001
14-1001
16-1001
0.6
1.3
3.2
7.9
16.3
37.5
97.2
235.0
1.1
2.4
5.2
12.6
20.0
60.8
151.0
357.0
1.6
3.5
7.2
17.6
37.1
84.4
206.0
479.1
2.2
4.6
9.3
22.
47.6
108.0
262.0
605.7
4.1
4.8
5.5
6.2
6.9
2.7
5.6
11.3
27.6
58.0
131.0
316.0
727.7
3.2
6.7
13.6
33.0
69.2
156.0
375.0
849.8
3.7
7.8
15.6
38.4
80.4
181.0
434.0
976.3
4.2
8.8
17.8
43.2
91.2
202.0
488.0
1098.4
4.8
10.0
19.9
48.8
103.0
226.0
542.0
1220.4
Double Acting Torques / English Units lbf/ins
Actuator Model
20
30
40
50
Pressure (psi)
02-1001
03-1001
05-1001
07-1001
09-1001
12-1001
14-1001
16-1001
5.6
12
28
70
144
332
860
2080
10
21
46
112
236
540
1340
3160
14
31
64
156
328
748
1820
4240
19
40
82
200
420
960
2320
5360
60
70
80
90
100
24
50
100
244
512
1160
2800
6440
28
59
120
292
612
1376
3320
520
33
69
138
340
712
1588
3840
8640
37
78
157
384
808
1792
4320
9720
42
88
176
432
912
2000
4800
10800
Spring Return Torques
Metric Units Nm
Actuator Model
02-1201
03-1201
05-1201
07-1201
09-1201
12-1201
14-1201-4900
16-1201
Position of air
OR spring stroke
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Spring Return Torques
English Units lbf/ins
3.5
4.0
4.5
5.0
Pressure Setting (bar)
5.5
Actuator Model
1.1
0.5
3.3
1.0
4.9
3.2
11.6
7.5
23.2
19.1
55.1
42.2
135.0
109.0
346.8
181.4
1.3
0.7
3.7
1.5
5.5
4.0
13.5
9.5
27.4
23.2
64.8
52.0
156.0
131.0
391.0
237.0
1.8
1.4
4.9
2.8
7.9
6.7
19.3
16.1
39.5
35.6
90.4
77.5
201.0
170.0
504.3
381.9
02-1201
1.4
0.9
4.0
1.9
6.2
4.9
15.5
11.6
31.1
27.0
75.6
60.0
178.0
148.0
426.0
282.0
1.6
1.2
4.3
2.2
7.0
5.8
17.4
13.8
35.3
31.4
81.1
68.9
195.0
164.0
465.0
332.0
03-1201
05-1201
07-1201
09-1201
12-1201
14-1201-4900
16-1201
Position of air
OR spring stroke
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
50
60
70
80
Pressure Setting (psi)
10.3
4.6
29.6
8.7
44
28
103
67
205
169
486
374
1200
969
3069
1605
12.2
6.8
33.4
13.7
51
38
126
92
251
215
595
479
1420
1200
3534
2197
14.1
9.5
37.2
19.0
61
49
146
116
300
266
693
585
1670
1400
3998
2788
16.0
12.5
43.7
24.7
70
59
171
143
351
315
802
688
1780
1500
4463
3380
18
Manual Fail-Safe
Spring Units
If you want to operate a valve manually, but maintain the advantage of the
failsafe spring’s certainty of position when unattended, use this device.
Manual unit cannot be left in the wrong position
Reliable torque delivery for valve reseat
Fire fail-safe option
For fail-safe manual operation of valves etc.
Clockwise or counter clockwise 90° spring action
(02 reversible without the need for spring removal)
Weather proof sealed spring housing to protect
from internal corrosion
Application
Specification
Manual fail-safe spring units are available in
Kinetrol sizes 02, 03 and 05 with factory
adjusted torques from 1.4Nm to 45.5Nm.
Models 05, 09 and 12 fire fail-safe units
(maximum torque to 260Nm / 2300 lbf.ins) are
available - contact Kinetrol for details.
ISO / DIN Versions
The 03 & 05 single and double versions are
available with female ISO/DIN drive. 03
versions are available with F03, F05 and F04
flanges whilst 05 versions are available with
F03, F05, F07 and F04 flanges.
To order din flange units use code 031 or 051
at the start of the product code, and for F04
versions add F04 to the end of the order code.
Spring Case
Shaft
Lever
Optional
fusible link
Die Cast zinc alloy with
epoxy paint finish
Stainless Steel
Stainless Steel (03 & 05)
aluminium (02)
Soldered type
(or equivalent) 2 options
Yield temperature °C
72
93
Max normal ambient temperature °C
42
63
Female spring Versions
Female ISO & Female ANSI direct mount
versions are available by replacing the dash ‘0-’
in the code with a ‘1F’. For example an ISO direct
mount manual failsafe is coded:
051F020-1006
Ordering Codes
19
To order a manual fail-safe spring unit, quote
model number, direction of spring (as per
technical data on page 4) followed by product
code.
When ordering fire fail-safe units, please state
maximum torque required (at or below
maximum shown in table) and if appropriate
fusible link yield.
Type Codes:
Example: for an 05 model, ISO threads, single
spring clockwise, 15Nm maximum torque, 72°
fusible link, the code would be:
1006- single spring unit
1007- double spring unit
1201- single spring
fire fail-safe unit
1203- double spring
fire fail-safe unit
050-020-1201-15Nm-72°C
'M' HOLES 'T'
X 'V' DEEP
ISO MOUNT
'F' (DOUBLE)
ON 'X' P.C.D.
'H'
'M' HOLES 'T'
X 'V' DEEP
'F'
ON `X' P.C.D.
'Y''B'
'Y' 'B'
'F'
03 & 05 MODELS
K
MANUAL
POSITION
ØM
L
MANUAL
POSITION
'J'
G
FEMALE SQUARE
'G' x 'H' DEEP
(2 SQUARES AT 45°
ON 030 MODEL).
'A'
'A'
SPRING RETURNED
POSITION
'Z'('R')
SPRING RETURNED
POSITION
STANDARD COUPLING
SUPPLIED WITH MALE
SQUARE UNITS
Ø 'P'('R')
'J'
Manual Fail-Safe
Spring Units
'F' (DOUBLE)
LOCATION FLANGE
(OPTIONAL)
02 MODEL
'F'
'H'
FIRE FAIL-SAFE
'E'
Fire fail-safe
'F'
Manual fail-safe
`M' HOLES `T'
x `V' DEEP
Shown in energised position
'D'
'H'
ØS
Mounting
flange
'C'
ON `X' P .C.D.
G
inch
mm
'A'
FIRE FAIL-SAFE DIMENSIONS
C
D
E
050-020-1201
85.0 75.0 97.0
050-020-1203
85.0 75.0 142.0
050-020-1201
3.45 2.95 3.82
050-020-1203
3.45 2.95 5.59
90°
Angular
travel
CCW action
Spring Handle Position
CW action
Spring Handle Position
'J'
Dimensions / Torques
Metric Units
No Of
Springs
A
B
mm mm
F
G
H
J
K
L
M
mm mm mm mm mm mm mm
020-020-1006
1
110.0
73.0
60.0
25
1
238.0 108.0
62.0
12.0
25
050-020-1006
1
238.0
13.0
25
050-020-1007
2
360.0
13.0
25
050-020-1201
1
238.0
7.98
7.93
8.98
8.93
9.525
118.0 62.0 9.470
118.0 106.0 9.525
9.470
118.0 79.0 9.525
9.470
10.0
030-020-1006
8.022
8.000
9.022
9.000
9.58
9.55
9.58
9.55
9.58
9.55
13.0
25
050-020-1203
2
13.0
25
9.58
9.55
031F020-1006
1
238.0 118.0 124.0 9.525
9.470
238.0 108.0 66.0 11.0
12.0
25
-
031F020-1006/F4
1
238.0 108.0
66.0
11.0
12.0
25
-
051F020-1006
1
238.0 118.0
69.0
14.0
16.0
25
051F020-1006/F4
1
238.0 118.0
69.0
14.0
16.0
051F020-1007
2
360.0 118.0 119.0 14.0
16.0
051F020-1007/F4
2
360.0 118.0 119.0 14.0
16.0
N
S
mm
T
V
mm
X
mm
Maximum
Torque Nm
Torque Reduction
Thro' Stroke Nm
22.0
16.0
4
34.0
M4
8.0
25.5
5.1
1.0
22.0
18.0
4
45.0
M5
10.0
31.1
14.0
3.0
25.4
19.0
6
45.0
M5
8.0
34.9
24.0
3.5
25.4
19.0
6
45.0
M5
8.0
34.9
48.0
5.8
25.4
19.0
6
68.0
M5
13.0
34.9
24.0
3.5
25.4
19.0
6
68.0
M5
13.0
34.9
48.0
5.8
-
-
4
-
M5/M6
10/12
36/50
14.0
3.0
-
-
4
-
M5
10.0
42.0
14.0
3.0
-
-
-
4
-
M5/M6/M8
10/12/13
36/50/70
24.0
3.5
25
-
-
-
4
-
M5
10.0
42.0
24.0
3.5
25
-
-
-
4
-
M5/M6/M8
10/12/13
36/50/70
48.0
5.8
25
-
-
-
4
-
M5
10.0
42.0
48.0
5.8
Weights in Metric
02 Models - 0.5
03 Models - 1.87
05 + 1 spring - 1.87
05 + 2 springs - 3.3
Kg
Kg
Kg
Kg
Weights in English
English Units
No Of
Springs
A
B
F
G
H
J
K
L
M
inch inch inch inch inch inch inch inch inch
0.314
0.312
0.354
0.352
0.375
0.373
0.375
0.373
0.375
0.373
0.39
0.98
0.47
0.98
0.51
0.98
0.51
0.98
0.51
0.98
0.316
0.315
0.355
0.354
0.377
0.376
0.377
0.376
0.377
0.376
4.88
0.375
0.373
0.51
0.98
4.25
2.60
0.43
0.47
9.35
4.25
2.60
0.43
1
9.35
4.64
2.72
059F020-1006/F4
1
9.35
4.64
059F020-1007
2
14.17
059F020-1007/F4
2
14.17
N
S
inch
T
UNC
V
inch
X
Maximum
Torque Reduction
inch Torque lbs.ins Thro' Stroke lbs.ins
0.86
0.63
4
1.34
8-32
0.31
1.0
45
8.85
0.86
0.70
4
1.77
10-24
0.39
1.22
124
26.55
1.0
0.75
6
1.77
10-24
0.31
1.37
212
30.98
1.0
0.75
6
1.77
10-24
0.31
1.37
425
51.33
1.0
0.75
6
2.68
10-24
0.51
1.37
212
30.98
0.377
0.376
1.0
0.75
6
2.68
10-24
0.51
1.37
425
51.33
0.98
-
-
-
4
-
10-24
0.39/0.47
1.42/1.97
124
26.55
0.47
0.98
-
-
-
4
-
10-24
0.39
1.65
124
26.55
0.55
0.63
0.98
-
-
-
4
-
10-24 0.39/0.47/0.51 1.42/1.97/2.76
212
30.98
2.72
0.55
0.63
0.98
-
-
-
4
-
10-24
212
30.98
4.64
4.69
0.55
0.63
0.98
-
-
-
4
-
10-24 0.39/0.47/0.51 1.42/1.97/2.76
425
51.33
4.64
4.69
0.55
0.63
0.98
-
-
-
4
-
10-24
425
51.33
029-020-1006
1
4.33
2.87
2.36
039-020-1006
1
9.35
4.25
2.44
059-020-1006
1
9.35
4.64
2.44
059-020-1007
2
14.17
4.64
4.17
059-020-1201
1
9.35
4.64
3.11
059-020-1203
2
9.35
4.64
039F020-1006
1
9.35
039F020-1006/F4
1
059F020-1006
0.39
0.39
1.65
1.65
02 Models - 1.102 lb
03 Models - 4.123lb
05 + 1 spring -4.123 lb
05 + 2 springs -7.275 lb
20
Geared Manual
Overrides
Kinetrol de-clutchable geared overrides are
available for models 05, 07, 09, 10, 12, 14 and
16, rated for the same torques as the actuators
and fitted between the actuator and the load.
The standard unit is supplied with the right hand
handwheel option (see drawing below),
whereby when the handwheel is moved in a
clockwise direction the actuator moves in a
counter clockwise direction. A left hand
handwheel option is also available.
Dimensions
S
4 Mounting holes M
thread X N deep X PCD
RH handwheel
B
K
Left hand handwheel
option
A
Clutch disengaged for
pneumatic operation
De-clutch lever switch
available
F
Corrosion resistant fully sealed to IP65
L (except for model 10
which has a female
L X 28 (1.1") deep)
E
D
N.B. Drawing is not representative of model 16 Gearbox.
For full details contact Kinetrol
Metric Units
Actuator
A
B
D
E
F
K
Model (ISO)
mm
mm
mm
mm
mm
mm
mm
L
05
300
67.8
13
170
103
127
9.5
07
300
67.8
20
192
92
127
09
300
67.8
26
218
92
127
10
300
67.8
-
267
92
12
300
67.8
31
248
14
615
67.8
38
16
610
132.0
55
M
N
PCD
S
mm
mm
mm
Wt
kgs
M5
12
34.9
208
9.18
16.0
M8
16
50.9
208
11.20
19.0
M10
20
65.0
208
14.44
127
22.0
M10
20
102.0
208
17.50
92
127
25.0
M12
25
77.8
208
20.40
292
92
127
28.6
M16
28
98.8
270
32.06
448
174
194
41.0
M16
28
200.0
276
69.80
English Units
Actuator
A
B
D
E
F
K
M
N
PCD
S
Model (ANSI)
Inch
Inch
Inch
Inch
Inch
Inch
Inch
L
UNC
Inch
Inch
Inch
lbs
05
11.81
2.67
0.51
6.69
4.06
5.0
0.375
10-24
0.47
1.375
8.19
20.2
07
11.81
2.67
0.79
7.56
3.62
5.0
0.630
5/
16
0.63
2.000
8.19
24.7
09
11.81
2.67
1.02
8.58
3.62
5.0
0.748
3 / -16
8
0.79
2.560
8.19
31.8
10
11.81
2.67
-
10.51
3.62
5.0
0.866
3 / -16
8
0.79
4.016
8.19
38.5
12
11.81
2.67
1.22
9.76
3.62
5.0
0.984
1 / -13
2
0.98
3.060
8.19
44.9
14
24.20
2.67
1.50
11.50
3.62
5.0
1.125
5 / -11
8
1.10
3.890
10.63
70.5
16
24.00
5.20
2.17
17.64
6.85
7.64
1.614
5 / -11
8
1.10
7.874
10.87
154.0
-18
Wt
Ordering Codes
21
Models 05 to 16:
(Standard right hand handwheel)
Models 05 to 16:
(Left hand handwheel)
Example for an 07 model:
070 K/Box (ISO Version)
079 K/Box (ANSI Version)
Example for an 07 model:
070 K/Box LH (ISO Version)
079 K/Box LH (ANSI Version)
ISO adaptor
Low cost direct mount flange and coupling for
mounting to valves with ISO 5211 drive
interfaces, available for actuator sizes 03 to 09
Mounting directly to standard Kinetrol double
acting actuator there by reducing stocking
requirements
Multiple mounting hole sets in one part
UK and US patents. The novel design allows
mounting screws to face in either direction.
Valve flanges with tapped holes can easily be
interfaced for the first time
Robust epoxy coated zinc alloy adaptor with
no threads for maximum corrosion resistance.
Female drive bi-square coupling is retained by
adaptor and made from zinc plated steel.
(Other materials available on request)
International Patents
H
Y
HEXAGON
RECESSES
W
VENT
GROOVES
X
FIXED
J
FEMALE
BI-SQUARE
G x E DEEP
(COUPLING
RETAINED)
22
Model OMO
(miniature)
Specification
Output Torque
8.0 lbf.ins/0.9 Nm
at 100 psi/7bar
Angle of Travel
(Adjustable)
5.00
30.7
5.978
5.990
5.978
5.990
12.5
Displaced Volume
0.15in3 / 2.4cm3
2 M52Air
M5Ports
Air Ports
staggered
Staggered
4 M3 x 5 deep mount holes
on 16.0 PCD
80° - 100°
(Restricted travel
versions available)
Finish
Epoxy stove enamel
Weight
88
32
10
10
0.26 lb/0.12 kg
Actual Size
For further information
see General Specification
on page 49.
Options
Code identification see page 38
Torque outputs see pages 47/48
23
36
36
5.00
010-100
010-100A
Model 01
Standard Coupling
(supplied with both actuators
weight 0.22 lbs/0.1kg)
9.53
4.80
4.78
12.7
7
38.5
4 Mount Holes each side
details below
12.5
7.2
15.8
6.35
6.33
6 to radius
14.4
14.4
6.35
6.33
Specification
57.3
57.3
Output Torque
ACTUATOR 010-100A
Angle of travel: 78° - 100°
Weight
0.33 lb/0.15 kg
58lbf.ins/6.7Nm
at 100 psi/7bar
4.75
4.70
71.4
71.4
7
4 Aux. Mount holes
details below
38.5
4 Aux. Mount Holes
M4 X 6 deep on 19.0 PCD
63.5
6 to radius
Displaced Volume
14.8
4 mount holes
details below
7.6
See Drawing
(Restricted travel
versions available)
12.5
7.2
25.7
63.5
7.6
Angle of Travel
(Adjustable)
2 air ports staggered
details below
31.75
31.5
ACTUATOR 010-100
Angle of travel: 90°
Weight
0.40 lb/0.18 kg
60.5
6.35
6.33
0.91in3 / 15cm3
Finish
Epoxy stove enamel
50.8
71.4
2 air ports
thread details below
Air Ports / Mount Holes
Model
Air Ports
010-100A
G1/8”
1/ ” NPT
019-100A
8
8.4
4.75
4.70
Shown at limit of
travel
Weight
See Drawing
Mount Holes
M4 x 6 deep x 19.0 PCD
8-32 UNC x 0.25”
deep on 1.00” PCD
Options
on page 49.
Fail safe spring return units - clockwise or counter
clockwise
Torque outputs see page 47/48
Size details of options see page 42
English Dimensions see page 42
24
20.0
16
8.022
8.000
Model 02
Standard Coupling
(supplied actuator
10
10
10
10
50
7.7
7.7
8.5 toto
radius
8.5
radius
Specification
7.98
7.93
Shown at limit
of travel
Output Torque
106.2lbf.ins/12.1Nm
at 100 psi/7bar
Angle of Travel
(Adjustable)
2 Air ports staggered
4 mount holes
each side details below
18.0
24.1
80° - 100°
(Restricted travel
versions available)
18
18
Displaced Volume
76
1.89in3 / 31cm3
Finish
Model
Air Ports
020-100
G1/8”
028-100
G1/8”
1/ ” NPT
029-100
8
Epoxy stove enamel
Weight
0.97 lb / 0.44 kg
on page 49
93
UNC 8-32 x 0.31”
deep on 1.00” PCD
Options
Fail safe spring return units - clockwise or
counter clockwise
180° model
25
Mount Holes
Standard Coupling
(supplied actuator
18
Model 03
9.022
9.000
22
12
12
60.0
10.5 to radius
16
33.6
33.6
8
Specification
Output Torque
22.0
5
MAX
22.0
8.98
8.93
4 mount holes
Angle of Travel
(Adjustable)
Shown at limit
of travel
91.4
22.0
28
Model
Air Ports
030-100 G1/8”
038-100 G1/8”
039-100 1/8” NPT
220lbf.ins/25Nm
at 100 psi/7bar
80° - 100°
(Restricted travel
versions available)
Displaced Volume
Mount Holes
3.66in3 / 60cm3
10-24 UNC x 0.39”
Finish
deep on 1.23” PCD
113
Options
Fail safe spring return units - clockwise
or counter clockwise
Epoxy stove enamel
Weight
1.53 lb/0.70 kg
(excluding coupling)
Limit switch boxes for open/close
indication - various switches for all
hazardous areas
For further information see
General Specification on
page 49
Integral solenoid valve
180° model
Female drive and mounting details to DIN
3337 and ISO 5211
ISO adaptor
26
25.4
19
9.58
9.55
Model 05
Standard Coupling
(supplied actuator
67
13
13
16
11 to radius
45
8
Specification
5
MAX
Output Torque
6 mount holes
33.6
440lbf.ins/50Nm
at 100 psi/7bar
84° - 100°
(Restricted travel
versions available)
112
Angle of Travel
(Adjustable)
Model
Air Ports
050-100
G1/8”
058-100
G1/8”
1/ ” NPT
059-100
8
Displaced Volume
6.9in3 / 113 cm3
9.53
9.47
Shown at limit
of travel
Mount Holes
UNC 10-24 x 0.39”
deep on 1.375” PCD
Finish
136
Epoxy stove enamel
Options
Weight
2.73 lb / 1.24 kg
180° model
on page 49
indication various switches for all
hazardous areas
AP Pneumatic positioner - full range of
options see pages 11 & 12
Female drive and mounting details to
DIN 3337 and ISO 5211
ISO adaptor
Geared manual override
27
EL electropneumatic positioner - full
range of options see pages 15 & 16
3 stop positioner
20
100
20
Model 07
32
16.027
16.000
Standard Coupling
(supplied actuator
40
20
18 to radius
64
64
10
5
MAX
Specification
4 mount holes
Output Torque
1080lbf.ins/124Nm
at 100 psi/7bar
36
43.4
15.98
15.93
Shown at limit
of travel
36
Angle of Travel
(Adjustable)
146
80° - 100°
(Restricted travel
versions available)
Model
Air Ports
Mount Holes
050-100 G1/4”
058-100 G1/4”
059-100 1/4” NPT
UNC 5/16 -18x 0.63”
deep on 2.00” PCD
Displaced Volume
18.3in3 / 300 cm3
Finish
178
Options
hazardous areas
180° model
ISO adaptor
3/8” ports
Epoxy stove enamel
Weight
6.91 lb / 3.13 kg
on page 49
3 stop positioner
28
39
28.5
28.5
14.36
14.34
Model 08
Standard Coupling
(supplied actuator
weight 0.031lbs/0.14kg)
19
99
19
19
17 to radius
63.5
9.5
Specification
6 mount holes
Output Torque
1500lbf.ins/173Nm
at 100 psi/7bar
72° - 93°
(Restricted travel
versions available)
41.4
14.30
14.25
Shown at limit
of travel
155
Angle of Travel
(Adjustable)
Model
Air Ports
080-100 G1/4”
088-100 G1/4”
089-100 1/4” NPT
Displaced Volume
23.9in3 / 392 cm3
Finish
Epoxy stove enamel
Weight
179
Options
6.85 lb / 3.11 kg
Fail safe spring return units - clockwise or
counter clockwise
on page 49.
Limit switch boxes for open/close indication
- various switches for all hazardous areas
EL electropneumatic positioner - full range of
29
Mount Holes
UNC 5/16-18 x 0.63”
deep on 2.00” PCD
19.0033
19.0000
50
38
38
126
26
Model 09
Standard Coupling
(supplied actuator
26
20
20
23.5 to radius
84
10
Specification
18.98
18.93
46.0
5
MAX
Shown at limit
of travel
4 mount holes
54.7
2280lbf.ins/261Nm
at 100 psi/7bar
46.0
Mount Holes
UNC 3/8-16 x 0.79”
deep on 2.56” PCD
187
Model
Air Ports
090-100
G1/4”
098-100
G1/4”
1/ ” NPT
099-100
4
Output Torque
Angle of Travel
(Adjustable)
80° - 100°
(Restricted travel
versions available)
Displaced Volume
39.3in3 / 644cm3
Finish
227
Options
hazardous areas
180° model
ISO adaptor
3/8” ports
Epoxy stove enamel
Weight
13.82 lb/6.24 kg
see General
Specification on page 49
3 stop positioner
30
Model 10
175
25.5
10
10
2
70
3
21.98
21.93
Shown at limit
of travel
23.5 to radius
Specification
72.125
71.125
Output Torque
4 mount holes
58
Angle of Travel
(Adjustable)
Model
Air Ports
101-100
G1/4”
108-100
G1/4”
1/ ” NPT
109-100
4
188.5
78° - 100°
(Restricted travel
versions available)
23.5 to radius
5
MAX
3625 lbf.ins/416 Nm
at 100 psi/7bar
Female Square
Female Square
DIN (F10)
22 x 24
DIN (F10) 22 x 24 deep
Mount Holes
UNC 3/8-16 x 0.79”
deep on 4.02” PCD
Displaced Volume
62.5in3 / 1025cm3
Female drive and mounting details to DIN 3337
and ISO 5211 as standard
Finish
Epoxy stove enamel
230
Weight
21.2 lb / 9.6 kg
on page 49.
Options
hazardous areas
3 stop positioner
31
50
25.06
25.00
56
Model 12
Standard Coupling
(supplied actuator
156
31
31
27 to radius
28
100
14
Specification
5
MAX
Output Torque
55.0
4 mount holes
each side details
below
68
24.98
24.93
Shown at limit
of travel
239
55.0
Model
Air Ports
120-100 G3/8”
128-100 G3/8”
129-100 3/8” NPT
5000 lbf.ins/575 Nm
at 100 psi/7bar
Angle of Travel
(Adjustable)
80° - 102°
(Restricted travel
versions available)
Displaced Volume
Mount Holes
86in3 / 1410cm3
UNC 1/2-13 x 0.98”
deep on 3.06” PCD
Finish
294
Options
Epoxy stove enamel
Weight
26.2 lb/11.9 kg
180° model
hazardous areas
3337 and ISO 5211
page 49
3 stop positioner
32
Model 14
Standard Coupling
(supplied actuator
38
57
41.08
41.00
63.5
200
38
32
16
34 to radius
128
Specification
Output Torque
12000 lbf.ins/1375 Nm
at 100 psi/7bar
5
4 mount holes
28.58
28.53
Shown at limit
of travel
69.85
84
Angle of Travel
(Adjustable)
80° - 100°
(Restricted travel
versions available)
308
Model
Air Ports
140-100 G1/2”
148-100 G1/2”
149-100 1/2” NPT
Displaced Volume
3
3
201 in / 3294 cm
Mount Holes
UNC 5/8-11 x 0.1.12”
deep on 3.89” PCD
Finish
Epoxy stove enamel
381
Weight
Options
44.5 lb / 23.1 kg
on page 49.
hazardous areas
180° model
3337 and ISO 5211
3 stop positioner
33
58.08
58.00
85
41.08
41.00
90
49
Model 16
Standard Coupling
(supplied actuator
274
55
55
32
16
175
49 to
radius
Auxiliary Mount Holes
4 Holes M5 x 8 Deep
Specification
R.24
2 Dowel Holes
20.00 x 40 deep
108
4 mount holes
Output Torque
125
27000 lbf.ins/3100 Nm
at 100 psi/7bar
Model
Air Ports
160-100 G1/2”
168-100 G1/2”
169-100 1/2” NPT
Angle of Travel
(Adjustable)
80° - 100°
(Restricted travel
versions available)
425
details below
108
40.95
40.87
Shown at limit
of travel
Mount Holes
Displaced Volume
UNC 7/8-9 x 1.50”
deep on 6.012” PCD
465in3 / 7630cm3
Finish
525
Options
hazardous areas
Epoxy stove enamel
Weight
82.5 lb/37.4 kg
see General
Specification on page 49
180° model
34
Model 18
Standard Coupling
(supplied actuator
130
80.00
80.08
115
57.1
57.0
73
360
78
78
52
72 to
radius
286
26
Specification
4 mount holes
Output Torque
60000 lbf.ins/6900 Nm
at 100 psi/7bar
56.95
56.85
Shown at limit
of travel
160
162
Angle of Travel
(Adjustable)
554
80° - 100°
(Restricted travel
versions available)
details below
4 Holes M5 x 8 Deep
Displaced Volume
3
2 Dowel Holes
25.00 x 50 deep
160
R30
18
3
1047 in / 17170 cm
K
L
I N
E
T
Model
Air Ports
180-100 G3/4”
188-100 G3/4”
189-100 3/4” NPT
R O
Finish
Epoxy stove enamel
680
Mount Holes
UNC 11/8-7 x 2.01”
deep on 8.91” PCD
Weight
157.4 lb / 71.4 kg
Options
on page 49
indication
various switches for all hazardous
areas
35
Standard Coupling
(supplied actuator
weight 34lbs/15.4kg)
170
100.07
100.00
150
73.17
73.00
Model 20
88
620
100
154
286
94 to
radius
Specification
72.95
72.85
Shown at limit
of travel
Output Torque
112000 lbf.ins/12760 Nm
at 100 psi/7bar
160
details below
R30
8 mount holes
/ Mount Holes
Air Ports
Mount Holes
G1”
M30 x 50 deep x 226 PCD
G1”
M30 x 50 deep x 226 PCD
209-100 1” NPT
UNC 11/8-7 x 2.01””
deep on 8.91” PCD
554
Air Ports
Model
200-100
208-100
160
162
2 Dowel Holes
10 x 12 deep
Angle of Travel
(Adjustable)
80° - 100°
(Restricted travel
versions available)
Displaced Volume
2034in3 / 33350cm3
Finish
4 Holes M5 x 8 Deep
680
Options
hazardous areas
Epoxy stove enamel
Weight
416.9 lb/195.6 kg
page 49.
36
170
88
160
100.00
2 Dowel Holes
10 x 12 deep
100.07
150
73.17
73.00
Model 30
Standard Coupling
(supplied actuator
weight 34lbs/15.4kg)
R30
566
174
8 mount holes
Specification
4 Holes M5 x 8 Deep
Output Torque
692
168000 lbf.ins/19140 Nm
at 100 psi/7bar
880
100
94 to
radius
154
Angle of Travel
(Adjustable)
286
80° - 100°
(Restricted travel
versions available)
Displaced Volume
3050 in3 / 50025 cm3
Finish
Epoxy stove enamel
Model
Air Ports Mount Holes
300-100
G1”
308-100
G1”
309-100 1” NPT UNC 11/8-7 x 2.01”
deep on 8.91” PCD
details below
72.95
72.85
Shown at limit
of travel
Weight
601.91 lb / 273 kg
Options
on page 49.
37
indication
various switches for all hazardous areas
MODEL
SIZE / THREAD
CODE
ACTUATOR or
ACTUATOR / POSITIONER
ASSEMBLY
OPTIONAL
SUPPLEMENTARY
CODE
SPRING RETURNS
0
010
to
200
ISO
Thread
standard
018
to
208
Pg Cable
entry
Thread
standard
019
to
209
ANSI
Thread
Standard
031
to
161
DIN
Flange
standard
(female drive)
032
to
142
0 No Actutor
0 No Spring Return
1 With A ctuator
2 Spring Return cw
2 Actuator & 3 Port
Single Solenoid
3 Spring Return ccw
1
3 Actuator & 5 Port
Single Solenoid
NB Other Solenoids
by description
9 Special Product
Specifications
- Contact Kinetrol
DIN Flange
standard
with NAMUR
Adaptor
033
to
143
DIN Flange
Actuator for
Positioner
034
to
144
Actuator only
for Postioner
ISO/DIN
Threads
035
to
145
ISO Thread
standard with
NAMUR
adaptor
036
to
146
ANSI Thread
standard with
NAMUR
adaptor
037
to
147
Actuator
only for
Positioner
ANSI thread
4 Spring Return to
centre
Abbreviations:
cw: Clockwise
ccw: Counter
(or anti)
Clockwise
Optional Suffixes:
M: Clear cone
position monitor
1006 Manual failsafe
spring unit (single
spring)
N: NAMUR adaptor
1007 Manual failsafe
spring unit (double
spring)
S: Solenoid valve silencers
1201 Fire failsafe spring
unit (05 size)
/ flow regulators
Actuator General
Ordering Codes
Kinetrol Actuators and Add-on control units
1202 Fire failsafe spring
unit (2 x 05 size)
Z: Less coupling
1302 Discrete limit switch
unit (non latchable)
1
Give Electrical Details.
(Volts & Hertz)
1305
Discrete limit switch
unit (latchable)
2100
High tempeature
Elastomer seals
Please Note:
There has been a decline of Pg cable thread entry
requirements, if this is required with a NAMUR
adaptor order the unit in the normal way, along with
an SP638 with a comment "Fit items together".
Low Pressure Air Application ordering codes
Femal Drive unit ordering codes
Universal Limit Switch ordering codes
AP Positioner ordering codes
EL Positioner ordering codes
3-stop positioner ordering codes
180∞ actuator ordering codes
Maual failsafe unit ordering codes
Geared Manual Overrides ordering codes
ISO adaptor odering codes
Damper Drive ordering codes
-see page 4
-see page 5
-see pages 7/8
-see pages 11 /12
-see pages 15/16
-see page 14
-see pages 17/18
-see pages 19/20
-see page 21
-see page 22
-see pages 39/40
EXAMPLES
A: 050-100
Double Acting Actuator (ISO Threads) No optional supplementary item
B. 050-120M
A + spring return (fail-safe CW) + clear cone monitor
C. 078-100
Double acting actuator with Pg cable entry thread
D. 059-100
Double acting actuator (ANSI threads)
E. 140-130-4900
140 Actuator (ISO threads) + spring return failsafe CCW (2 x 120 springs)
38
G3 Damper Drive
Purpose designed factory built and
tested drives for air/gas flow control
dampers on burner, heater, boiler
and turbine systems in power
plants, refineries and a wide range
of industrial applications.
Fully integrated packages with
patented mounting flange for easy
fitting to simple stands, can be used for
on/off or modulations control, double
acting or spring return, and with a full range
of integrated direct mount Kinetrol
accessories.
Certificate No. FM22163
Kinetrol's rigorous quality
program is approved to ISO
9001:2000 and AS/EN 9100
ensuring that each unit is
manufactured to the highest
standards.
Kinetrol Actuators, Springs
and Accessories are now
approved up to ATEX
Category 1.
For modulating or on/off control with
failure mode options
Reduced operating costs due to long
maintenance-free life
Integral manual override
Compact space saving design
Suitable for new installations or
replacement of existing electric or
pneumatic drives
Quick and easy installation and set up
Can result in lower energy costs
resulting from accurate flow control
39
US Patent No: US6,939,931 B1
*Listed weights exclude actuator
G3 Damper Drive
Options
Double acting and spring fail-safe
(open or closed)
Modulating (3-15 psi and 4-20mA signal)
Fail to low signal
Lock in last position
Limit switch remote position indication
4-20mA angle retransmission
High visibility position indication
Different diameter handwheels
Special output levers to suit existing
or new requirements
Ordering Codes
HANDWHEEL
DIAMETER
(D)
HANDWHEEL SIDE
(SEE SKETCH)
L=LEFT
OUTPUT LEVER
AVAILABLE ON MODELS:
16
14
R=RIGHT
2=254mm - 10"
3=304.8mm - 12"
WHERE APPLICABLE:
S
= STANDARD
Y
= NO COST OPTION
E
= EXTRA COST OPTION
= NOT AVAILABLE
4=406.4mm - 16"
E
S
E
E
S
E
5=609.6mm - 24"
6=762mm - 30"
18
E
S
20
S
INCLUDING D/A ACTUATOR:
THICKNESS (t)
OPTIONAL LIMIT SWITCH BOX (TO INDICATE IF
1=3/8"
HANDWHEEL IS ENGAGED OR DISENGAGED)
2=1/2"
OPTIONS:
3=5/8"
0 = NO LIMIT SWITCH
4=3/4"
1 = 2 x i/S PROX. SENSORS
5=7/8"
2 = 2 x PNEUMATIC LS
6=1"
4 = 2 x V3 MECH LS
7=1 1/8"
5 = 2 x 20-260 Vac PROX.
8=1 1/4"
6 = 2 x 5-60 Vdc PROX.
9=1 1/2"
7 = 4 x V3 MECH LS
140 = ISO BASIC D/A ACT
149 = ANSI BASIC D/A ACT
POSITION MONITOR ON LS BOX:
144 = ISO D/A ACT FOR POSITIONER
C=YES
D
147 = ANSI D/A ACT FOR POSITIONER
0=NO
160
180
ISO D/A ACT (FOR USE WITH
=
OR WITHOUT POSITIONER)
LEVER HOLE PATTERN
200
169
189
HOLE DIAMETER (d)
=
ANSI D/A ACT (FOR USE WITH
OR WITHOUT POSITIONER)
3=15.9mm - 5/8"
A=11/16"
HANDWHEEL
OFFSET
(W)
4=19.1mm - 3/4"
AVAILABLE ON MODELS:
1= - 11"
4=508mm - 20"
5=609.6mm - 24"
16
18
20
S
2=304.8mm - 12"
3=406.4mm - 17"
5=22.2mm - 7/8"
6=25.4mm - 1"
14
E
E
E
DISTANCE FROM CENTRE
2=12.7mm - 1/2"
209
7=28.6mm - 1 1/8"
8=31.8mm - 1 1/4"
S
E
E
E
9=38.1mm - 1 1/2"
S
E
E
S
E
IF NECESSARY, FIT OPTIONAL
EXTENSION TO ENSURE THAT
HANDWHEEL IS AT A SAFE DISTANCE
FROM MOVING OUTPUT LEVER.
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
C1
101.6mm - 4"
127mm - 5"
127mm - 5"
152.4mm - 6"
165.1mm - 6.5"
190.5mm - 7.5"
266.7mm - 10.5"
228.6mm - 9"
254mm - 10"
254mm - 10"
254mm - 10"
254mm - 10"
304.8mm - 12"
317.5mm - 12.5"
147.3mm - 5.8"
152.4mm - 6"
101.6mm - 4"
C2
152.4mm - 6"
152.4mm - 6"
198.1mm - 7.8"
254mm - 10"
190.5mm - 7.5"
215.9mm - 8.5"
292.1mm - 11.5"
342.9mm - 13.5"
304.8mm - 12"
301mm - 15"
317.5mm - 12.5"
330.2mm - 13"
406.4mm - 16"
363.2mm - 14.3"
279.4mm - 11"
190.5mm - 7.5"
-
C3
203.2mm - 8"
177.8mm - 7"
254mm - 10"
304.8mm - 12"
215.9mm - 8.5"
241.3mm - 9.5"
317.5mm - 12.5"
457.2mm -18"
301mm - 15"
508mm - 20"
406.4mm - 16"
406.4mm - 16"
444.5mm - 17.5"
406.4mm - 16"
304.8mm - 12"
228.6mm - 9"
304.8mm - 12"
AVAILABLE ON MODELS
14
16
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
18
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
20
Y
Y
Y
Y
Y
Y
Y
* For more information
see KF535
40
Interface Options &
Valve Mounting Service
Kinetrol Interfacing Options
Kinetrol is in a continually changing environment when it comes to interfacing options between its
quarter-turn actuators, control units and other auxhilliary equipment and do offer a range of
products and adaptors that conform to most industry standards.
The patended ‘ISO adaptor’ is available now and is available for Kinetrol actuator models 03-09.
It provides a robust mounting option between Kinetrol’s actuators and valves that conform to the
ISO 5211 standard.
As well as the ISO adaptor, various actuator models are now designed to provide mounting
options using the VDI/VDE 3847 standard without compromising the actuators performance or
robust casing.
The third standard interfacing option that Kinetrol have designed for is the Namur
reccomendation NE 014. Shafts on many the the control modules and actuator models have been
deisigned to fit Namur standard products and uphold the integrity of the joints between ‘add on’
accessories, actuators and valves.
Direct mount products are also available including female drive spring units, manual fail-safe
handles, positioners and our universal limit switch box.
For solenoid mounting, Kinetrol have manufactured the Namur interface adaptor to cut out all
external piping, allowing the air to port directly to the actuator body.
Kinetrol’s Valve Mounting Service
Kinetrol now has well over 40 years experience in the industry and is well renowned for its
build quality. Thousands of mount kit designs are available, and new mountings can be
designed to meet specific customer requirements at any time.
We can source a wide range of Ball, Butterfly and Plug valves
from across the world and then design the package that is right
for you, using our robust 90° pneumatic actuator and any of our
modular ‘add on’ control units.
We can now provide you with full ATEX explosion proof products as
well as an AS Interface option and a range of new and improved
control modules.
Our build quality and rigorous in-house quality control and testing
ensures that you will be supplied with an unbeatable product upon
arrival at your site.
For questions regarding our valve mounting service please contact
Kinetrol.
41
Assembly Dimensions
ØK
4 Mounting holes
W thread x Y deep
x PCD
S
H
M
H
M
S
M
E
B
R
ØF
ØV
ØU
C
N Number of holes
T thread x D deep
x PCD or R
R
G
L
J
Shown at limit
of travel
A
Air ports P
(staggered)
actuator metric units
Actuator
Model
A
mm
C
mm
G
mm
H
mm
OMO
01
01A
32.0 30.7 12.5
71.4 60.5 14.8
71.4 57.3 14.4
4.8
4.8
02
03
05
07
08
09
10 *
12
14
16
18
20
30
93.0
113.0
136.0
178.0
179.0
227.0
230.0
294.0
353.0
525.0
680.0
692.0
692.0
8.0
9.0
9.5
16.0
14.3
19.0
22.0
25.0
28.6
41.0
57.0
73.0
73.0
B
mm
76.0
91.4
112.0
146.0
155.0
187.0
188.5
239.0
306.0
425.0
554.0
576.0
576.0
24.1
28.0
33.6
43.4
41.4
54.7
58.0
68.0
84.0
125.0
162.0
174.0
174.0
S
mm
N
No.
T
ISO
D
mm
R PCD
mm mm
P
ISO
L
ØK
mm mm
36.0
37.0
38.5
10.0
4
M3
5.0
16.0
M5
G1/8
G1/8
9.5
9.5
50.0
60.0
67.0
100.0
99.0
126.0
175.0
156.0
200.0
274.0
360.0
620.0
880.0
10.0
12.0
13.0
20.0
19.0
26.0
25.5
31.0
38.0
55.0
78.0
100.0
100.0
F
mm
33.6
45.0
64.0
63.5
84.0
100.0
127.0
175.0
252.0
286.0
286.0
4
M4
6.0
4
4
6
4
6
4
4
4
4
4
4
8
8
M4
M5
M5
M8
M8
M10
M10
M12
M16
M24
M30
M30
M30
8.0
10.0
10.0
16.0
16.0
20.0
16.0
24.0
28.6
38.0
50.0
50.0
50.0
19.0
18.0 25.5
22.0 31.1
34.9
36.0 50.9
50.8
46.0 65.0
72.1 102.0
55.0 77.8
69.9 98.8
108.0 152.7
160.0 226.3
160.0 226.3
160.0 226.3
Wt
kg
0.12
12.7 0.28
12.7 0.25
G1/8 16.0 20.0 0.44
G1/8 18.0 22.0 0.73
G1/8 19.0 25.4 1.28
G1/4 32.0 40.0 3.30
G1/4 28.5 39.0 3.25
G1/4 38.0 50.0 6.54
G1/4
9.60
G3/8 50.0 56.0 12.50
G1/2 57.0 63.5 20.91
G1/2 85.0 90.0 39.77
G1/2 115.0 130.0 77.60
G1 150.0 170.0 195.6
G1 150.0 170.0 273.0
actuator english units
Actuator
Model
A
B
inch inch
G
H
inch inch
S
F
inch inch
OMO
01
01A
1.26 1.21 0.49
1.42
2.81 2.38 0.58 0.187 1.46
2.81 2.26 0.57 0.187 1.52
0.39
02
03
05
07
08
09
10 *
12
14
16
18
20
30
3.67
4.45
5.35
7.01
7.05
8.94
9.06
11.57
14.06
20.67
26.77
27.24
27.24
3.00
3.60
4.41
5.75
6.10
7.37
7.42
9.41
12.05
16.73
21.81
22.68
22.68
C
inch
0.95
1.10
1.32
1.71
1.63
2.16
2.28
2.68
3.38
4.92
6.38
6.85
6.85
0.315 1.97
0.354 2.36
0.375 2.64
0.630 3.94
0.562 3.90
0.748 4.96
0.870 6.89
0.984 6.14
1.125 7.87
1.614 10.79
2.244 14.17
2.874 24.41
2.874 35.65
D
N
T
No. UNC inch
4
R PCD
P
inch inch NPT
0.20
0.630
1/8
1.32
1.77
2.52
2.50
3.31
3.94
5.00
6.90
9.92
11.26
11.26
0.39
0.47
0.51
0.79
0.75
1.02
1.00
1.22
1.50
2.17
3.07
3.94
3.94
4
8-32
0.24
0.750
1/8
4
4
6
4
6
4
4
4
4
4
4
8
8
8-32
10-24
10-24
5/ -18
16
5/ -18
16
3/ -16
8
3/ -16
8
1/ -13
2
5/ -11
8
7/ -9
8
1 1/8-7
1 1/8-7
1 1/8-7
0.32
0.39
0.39
0.63
0.63
0.79
0.63
0.94
1.13
1.50
2.00
2.00
2.00
0.709 1.000
0.866 1.225
1.375
1.417 2.000
2.000
1.811 2.560
2.839 4.016
2.165 3.060
2.750 3.890
4.250 6.010
6.300 8.910
6.300 8.910
6.300 8.910
1/8
1/8
1/8
1/4
1/4
1/4
ØK
inch
L
inch
0.26
0.375 0.50 0.62
0.375 0.50 0.55
0.63
0.71
0.75
1.26
1.12
1.50
0.79
0.87
1.00
1.58
1.54
1.97
1/4
3/8
1/2
1/2
1/2
1
1
Wt
lb
1.97 2.20
2.24 2.50
3.35 3.54
4.53 5.12
5.91 6.69
5.91 6.69
0.97
1.60
2.82
7.28
7.16
14.42
21.20
27.56
46.10
87.70
171.0
416.9
601.9
DIN/ISO options
Actuator
Model
H
DIN/ISO
mm flange no.
021-100
M
mm
V
mm
U
mm
PCD
mm
W
Y (min)
mm
J
mm
E
mm
66.0
F03
9
46
25
36
M5
8
2
10
031-100 74.0
051-100 81.0
071-100 117.0
F03
F04
F05
9
11
14
46
54
64
25
30
35
36
42
50
M5
M5
M6
8
8
10
2
2
3
10
12
16
091-100
121-100
141-100
161-100
F07
F10
F12
F16
17
22
27
46
90
125
150
203
55
70
85
130
70
102
125
165
M8
M10
M12
M20
13
16
20
32
3
3
3
4
19
24
29
48
146.0
180.5
226.5
380.0
*Female drive unless
specified.
42
S
G
H
Mount hole orientation same as
actuator except model 01 and low
pressure combinations (set for
below 5.5 bar/80psi)
L
Spring return
actuator dimensions
K
N number of holes
T thread x D deep x PCD
Metric Units
Actuator
Model
01-120
01A-120
L
mm
60.2
61.7
H
mm
23.2
23.2
ØK
mm
58.8
58.8
G
mm
4.8
4.8
S
mm
7.2
7.2
N
No.
3
3
T
ISO
M3
M3
D
mm
4.0
4.0
PCD
mm
15.9
15.9
Wt
Kg
0.53
0.50
02-120
03-120-5600
03-120
05-120
07-120-4000
90.0
100.0
107.0
114.0
155.3
40.0
40.0
47.0
47.0
55.3
73.0
73.0
118.0
118.0
118.0
8.0
8.0
9.0
9.5
9.5
10.0
10.0
12.0
13.0
13.0
4
4
4
6
6
M4
M4
M5
M5
M5
8.0
8.0
10.0
8.0
8.0
25.5
25.5
31.1
34.9
34.9
0.84
1.13
2.08
2.63
4.65
07-120
08-120-4100
08-120
09-120-4200
182.0
181.0
191.0
208.0
82.0
82.0
92.0
82.0
152.0
152.0
200.0
152.0
16.0
16.0
14.3
16.0
20.0
20.0
19.0
20.0
4
4
6
4
M8
M8
M8
M8
16.0
16.0
12.0
16.0
50.9
50.9
50.8
50.9
7.26
7.21
11.48
10.50
09-120
10-120-5800*
10-120*
12-120-4300
218.0
265.0
285.0
248.0
92.0
92.0
112.0
92.0
200.0
200.0
206.0
200.0
19.0
19.0
22.0
19.0
26.0
26.0
26.0
26.0
4
4
8
4
M10
M10
M10
M10
20.0
20.0
16.0
20.0
65.0
65.0
102.0
65.0
14.77
17.85
22.00
20.73
12-120-4400
12-120
14-120-4900
14-120
14-120-5000
340.0
293.0
417.0
374.0
337.0
184.0
136.0
217.0
174.0
137.0
200.0
258.0
258.0
394.0
258.0
19.0
25.0
28.6
28.6
28.6
26.0
31.0
38.0
38.0
38.0
4
4
4
4
4
M10
M12
M16
M16
M16
20.0
22.0
28.5
28.5
28.5
65.0
77.8
98.8
98.8
98.8
28.96
27.95
51.81
71.25
38.18
16-120-6000
16-120-6100
16-120
18-120-7000
586.0
450.0
485.5
571.5
312.0
176.0
211.5
211.5
394.0
394.0
524.0
524.0
28.6
41.0
41.0
57.0
38.0
55.0
55.0
78.0
4
4
4
4
M16
M24
M24
M30
28.5
32.0
38.0
50.0
98.8
152.7
152.7
226.3
90.00
75.00
123.0
161.0
18-120
20-120-7200
20-120-7300
20-120
30-120
30-120-7600
30-120-7700
30-120-7800
671.5
931.5
1031.5
1131.5
1593.0
311.5
311.5
411.5
511.5
711.5
1293.0
1393.0
1493.0
411.5
511.5
611.5
524.0
524.0
524.0
524.0
524.0
524.0
524.0
524.0
57.0
73.0
73.0
73.0
73.0
73.0
73.0
73.0
78.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
4
8
8
8
8
8
8
8
M30
M30
M30
M30
M30
M30
M30
M30
50.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
226.3
226.3
226.3
226.3
226.3
226.3
226.3
226.3
240.0
350.0
408.0
479.0
770.0
524.0
606.0
688.0
Actuator
Model
01-120
01A-120
L
inch
2.37
2.43
H
inch
0.91
0.91
ØK
inch
G
inch
0.187
0.187
S
inch
0.28
0.28
N
No.
3
3
T
UNC
D
inch
0.16
02-120
03-120-5600
03-120
05-120
07-120-4000
3.54
3.94
4.21
4.49
6.11
1.58
1.58
1.85
1.85
2.18
2.32
2.32
2.87
2.87
4.25
4.25
4.25
0.315
0.315
0.354
0.375
0.375
0.39
0.39
0.47
0.51
0.51
4
4
4
6
6
8-32
8-32
10-24
10-24
10-24
07-120
08-120-4100
08-120
09-120-4200
7.17
7.13
7.52
8.19
3.23
3.23
3.62
3.23
6.00
6.00
7.87
6.00
0.630
0.630
0.563
0.630
0.79
0.79
0.75
0.79
4
4
6
4
5
09-120
8.58
10-120-5800* 10.43
10-120*
11.22
12-120-4300
9.76
3.62
3.62
4.41
3.62
7.90
7.90
8.11
7.90
0.748
0.748
0.866
0.748
1.02
1.02
1.02
1.02
4
4
8
4
12-120-4400
12-120
14-120-4900
14-120
14-120-5000
13.39
11.54
16.43
14.72
13.27
7.25
5.35
8.54
6.85
5.40
7.90
10.16
10.16
15.50
10.16
0.748
0.984
1.125
1.125
1.125
1.02
1.22
1.50
1.50
1.50
4
4
4
4
4
16-120-6000
16-120-6100
16-120
18-120-7000
23.07
17.72
19.11
22.50
12.28
6.93
8.33
8.33
15.50
15.50
20.63
20.63
1.125
1.614
1.614
2.244
1.50
2.17
2.17
3.07
4
4
4
4
18-120
20-120-7200
20-120-7300
20-120
30-120
26.44
36.67
40.61
44.55
62.72
12.26
12.26
16.20
20.14
28.01
20.63
20.63
20.63
20.63
20.63
2.244
2.874
2.874
2.874
2.874
3.07
3.94
3.94
3.94
3.94
4
8
8
8
8
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
1 1/8-7
30-120-7600
30-120-7700
30-120-7800
50.91
54.84
58.78
16.20
20.14
24.07
20.63
20.63
20.63
2.874
2.874
2.874
3.94
3.94
3.94
8
8
8
1 1/8-7
1 1/8-7
1 1/8-7
English Units
43
5
5
/16-18
/16-18
/16-18
5
/16-18
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
7/8-9
7/8-9
0.16
PCD
inch
0.625
0.625
Wt
lb
1.17
1.10
0.31
0.31
0.39
0.31
0.31
1.00
1.00
1.225
1.375
1.375
1.85
2.49
4.58
5.80
10.25
0.63
0.63
0.47
0.63
2.00
2.00
2.00
2.00
2.56
16.00
15.90
25.31
23.15
0.79
0.79
0.63
0.79
2.56
4.02
2.56
32.56
40.30
48.50
45.71
0.79
0.87
1.12
1.13
1.13
2.56
3.06
3.89
3.89
3.89
63.86
61.62
113.98
157.0
84.19
1.13
1.26
1.50
1.97
3.89
6.01
6.01
8.91
198.0
165.0
272.0
356.0
1.97
1.97
1.97
1.97
1.97
8.91
8.91
8.91
8.91
8.91
530.0
773.0
901.0
1058.0
1701.0
1.97
1.97
1.97
8.91
8.91
8.91
1158.0
1339.0
1520.0
*Female drive unless
specified.
Metric Torques
pressure (bar)
Actuator
Model
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7
OMO
01 02 03 05 07 08 09 10 12 14 16 18 20 30 -
0.1
1.1
1.8
3.9
9
22
31
46
80
103
265
640
1250
2480
3720
0.2
1.6
2.7
5.8
12.5
30.5
44
64
111
147
360
860
1750
3440
5160
0.25
2.1
3.6
7.6
16.5
39.5
57
83
141
190
460
1090
2250
4400
6600
0.35
2.6
4.6
9.6
20
48.5
69
102
172
232
560
1310
2750
5310
7695
0.4
3
5.5
11.5
24
57.5
82
121
202
275
660
1530
3250
6290
9435
0.5
3.5
6.4
13.4
27.5
66.5
95
140
232
319
760
1750
3750
7230
10845
0.55
4
7.3
15.4
31.5
76
108
159
263
360
870
1980
4300
8160
12240
0.6
4.5
8.2
17.4
35
85.5
121
179
294
403
975
2200
4850
9090
13635
0.7
5.1
9.2
19.3
39
95
134
199
325
446
1080
2420
5400
10020
15030
0.75
5.6
10.2
21.3
43
105
147
220
355
490
1180
2650
5950
10960
16440
0.85
6.1
11.1
23.2
46.5
114
160
241
385
532
1280
2870
6400
11890
17835
0.9
6.7
12.1
25.3
50.5
124
173
261
416
575
1375
3100
6900
12760
19140
- 100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Actuator
Model
Position of air OR
spring return
stroke
1.7
01-120
02-120
03-120-5600
03-120
05-120
07-120-4000
07-120
08-120-4100
08-120
09-120-4200
09-120
10-120-5800
10-120
12-120-4300
12-120-4400
12-120
14-120-4900
14-120
14-120-5000
16-120-6100
16-120-6000
16-120
18-120-7000
18-120
20-120-7200
20-120-7300
20-120
30-120-7600
30-120-7700
30-120-7800
30-120
47
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
pressure setting (bar)
2
2.4
2.8
3.8
4.1
4.5
4.8
5.2
5.5 *
3.4
1.7
1.7
1.1
3.6
2.0
3.8
2.4
1.9
1.5
4.2
2.8
4.4
3.3
2.3
1.8
4.7
3.7
5.1
6.9
4.7
14.1
9.6
5.1
7.5
5.5
15.3
11.3
5.1
8.1
6.4
16.4
13.0
5.1
8.9
7.2
18.1
14.7
5.1
9.5
7.8
19.2
15.8
5.1
10.3
8.7
20.9
17.5
18.0
30.5
19.8
39.5
30.5
18.0
33.9
23.7
44.1
35.0
18.0
37.3
27.1
48.0
39.0
18.0
40.7
30.5
52.5
43.5
56.5
45.2
18.0
43.5
34.4
56.5
47.5
61.0
50.3
18.0
46.9
38.4
18.0
50.8
42.4
47.5
65.5
54.8
47.5
70.6
59.9
41.8
61.0
50.3
108.0
100.0
107.0
78.0
41.8
67.8
56.5
41.8
74.6
63.8
41.8
81.9
71.2
41.8
89.3
79.1
41.8
96.6
86.4
41.8
104.0
93.8
100.0
115.5
90.0
100.0
124.0
102.0
100.0
136.0
114.6
100.0
145.0
124.0
100.0
155.9
134.9
100.0
164.0
143.0
72.3
132.0
110.0
145.0
111.0
356.0
288.0
374.0
3249.0
72.3
147.0
124.0
160.0
127.0
390.0
2322.0
408.0
290.0
72.3
161.0
139.0
176.0
142.0
424.0
356.0
442.0
330.0
72.3
176.0
154.0
191.0
158.0
469.0
390.0
479.0
367.0
72.3
191.0
168.0
206.0
174.0
497.0
418.0
517.0
406.0
72.3
72.3
168.0
221.0
189.0
529.0
447.0
554.0
443.0
168.0
238.0
204.0
529.0
447.0
588.0
478.0
3.1
3.5
1.5
0.9
3.0
1.4
5.7
5.1
6.3
4.1
13.0
8.5
2.8
2.1
3.4
2.8
4.1
3.5
4.8
4.2
5.3
4.8
9.0
5.1
11.9
8.5
15.3
11.9
18.6
15.3
22.0
18.0
18.6
7.9
23.7
13.6
27.1
16.9
31.1
20.9
35.0
26.0
26.0
14.7
31.6
21.5
37.3
28.2
44.1
35.0
50.8
41.8
56.0
41.8
65.0
52.0
77.0
64.0
89.0
77.2
97.0
86.9
54.0
42.9
68.9
57.6
83.6
72.3
89.3
66.1
72.3
103.0
80.2
72.3
117.0
94.9
288.0
220.0
322.0
254.0
198.0
198.0
198.0
198.0
198.0
198.0
198.0
198.0
198.0
421.0
583.0
492.0
421.0
652.0
580.0
421.0
722.0
668.0
864.0
576.0
421.0
421.0
421.0
421.0
421.0
421.0
668.0
939.0
660.0
668.0
1004.0
742.0
668.0
1097.0
832.0
668.0
1165.0
906.0
668.0
1256.0
1002.0
668.0
1321.0
1081.0
192.0
119.0
220.0
158.0
249.0
186.0
172.0
140.0
359.0
245.0
208.0
174.0
428.0
333.0
237.0
198.0
497.0
421.0
514.0
404.0
807.0
484.0
970.0
736.0
1182.0
967.0
1621.0
1025.0
1940.0
1362.0
2325.0
1763.0
2433.0
1622.0
2878.0
2127.0
3466.0
2696.0
1260.0
1040.0
1457.0
874.0
2692.0
2203.0
2788.0
1958.0
1040.0
1637.0
1036.0
1040.0
1875.0
1250.0
1040.0
2053.0
1441.0
1040.0
2206.0
1630.0
1040.0
2426.0
1840.0
1040.0
2585.0
2011.0
1040.0
2800.0
2234.0
1040.0
2954.0
2417.0
2203.0
3072.0
2271.0
2203.0
3471.0
2632.0
2203.0
3739.0
2983.0
2203.0
4023.0
3291.0
4121.0
3046.0
2203.0
2203.0
2203.0
2203.0
3291.0
4798.0
3732.0
3291.0
4514.0
3423.0
3291.0
5181.0
4133.0
3291.0
5456.0
4464.0
4038.0
3304.0
4112.0
3118.0
3304.0
5113.0
4183.0
3304.0
3304.0
3304.0
3304.0
3304.0
3304.0
3304.0
4183.0
5273.0
3871.0
4183.0
5676.0
4304.0
4183.0
6072.0
4844.0
4183.0
6648.0
5440.0
6771.0
5134.0
4183.0
6648.0
5440.0
7179.0
5598.0
4183.0
4183.0
5440.0
7772.0
6200.0
5440.0
8184.0
6696.0
20
30
40
50
60
70
80
90
100
OMO - 100
01 - 100
02 - 100
03 - 100
05 - 100
07 - 100
08 - 100
09 - 100
10 - 100
12 - 100
14 - 100
16 - 100
18 - 100
20 - 100
30 - 100
1
9
14
29
70
175
250
360
640
830
2150
5200
10000
20000
30000
2
15
25
53
116
280
405
590
1020
1350
3350
7900
16100
32000
48000
3
21
36
77
160
390
560
820
1390
1870
4550
10600
22200
43000
64500
3.5
26
48
101
205
500
710
1050
1760
2400
5800
13400
28300
54500
81750
4.5
32
59
124
250
610
870
1280
2130
2900
7000
16100
34500
66000
99000
5
39
70
148
300
730
1030
1530
2500
3440
8300
18800
41300
78000
117000
6
45
82
173
346
850
1190
1780
2880
3970
9600
21600
48000
89000
133500
7
51
93
196
393
960
1350
2020
3250
4480
10800
24300
54500
100500
150750
8
58
105
220
440
1080
1510
2280
3625
5000
12000
27000
60000
112000
168000
55
60
65
70
75
80 *
34
21
17
13
37
25
39
29
20
16
42
33
Position of air OR
spring return
stroke
20
01-120
02-120
03-120-5600
03-120
05-120
07-120-4000
07-120
08-120-4100
08-120
09-120-4200
09-120
10-120-5800
10-120
12-120-4300
12-120-4400
12-120
14-120-4900
14-120
14-120-5000
16-120-6100
16-120-6000
16-120
18-120-7000
18-120
20-120-7200
20-120-7300
20-120
30-120-7600
30-120-7700
30-120-7800
30-120
English Torques
Actuator
Model
Actuator
Model
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
Start
Finish
30
35
40
45
50
13
8
27
12
50
45
56
37
115
75
30
15
15
10
32
18
45
61
41
125
85
45
66
49
135
100
45
71
56
145
115
45
79
64
160
130
45
84
69
170
140
45
91
77
185
155
160
270
175
350
270
160
300
210
390
310
160
330
240
425
345
160
360
270
465
385
500
400
160
385
305
500
420
540
445
160
415
340
160
450
375
420
580
485
420
625
530
370
540
445
953
847
950
690
370
600
500
370
660
565
370
725
630
370
790
700
370
855
765
370
925
830
847
1025
795
847
1100
900
847
1190
1000
847
1280
1100
847
1365
1185
847
1450
1270
640
1170
970
1280
985
3150
2550
3310
2205
640
1300
1100
1415
1125
3450
2850
3610
2570
640
1430
1230
1555
1260
3750
3150
3915
2920
640
1560
1360
1690
1400
4150
3450
4240
3250
640
1690
1490
1825
1540
4400
3700
4580
3595
640
640
1490
1960
1670
4680
3960
4900
3920
1490
2110
1810
4680
3960
5200
4230
25
19
30
25
36
31
42
37
47
42
80
45
105
75
135
105
165
135
195
160
165
70
210
120
240
150
275
185
310
230
230
130
280
190
330
250
390
310
450
370
500
366
587
472
683
568
760
645
886
780
480
380
610
510
740
640
790
585
640
910
710
640
1040
840
2550
1950
2850
2250
1750
1750
1750
1750
1750
1750
1750
1750
1750
3729
5163
4357
3729
5774
5136
3729
6386
5914
7646
5098
3729
3729
3729
3729
3729
3729
5914
8310
5841
5914
8885
6567
5914
9708
7363
5914
10310
8018
5914
11116
8868
5914
11691
9567
1700
1050
1950
1400
2200
1650
1520
1240
3178
2172
1840
1540
3790
2950
2100
1750
4401
3729
4551
3579
7142
4283
8585
6514
10461
8558
14346
9071
17169
12054
20576
15603
16797
9394
25470
18824
30674
23860
11151
9204
12894
7735
23824
19497
24674
17328
9204
14487
9169
9204
16594
11063
9204
18169
12753
9204
19523
14426
9204
21470
16284
9204
22877
17797
9204
24780
19771
9204
26143
21390
19497
27187
20098
19497
30718
23293
19497
33090
26400
19497
35604
29125
36471
26957
194977
19497
19497
19497
29125
39949
30294
29125
42462
33028
29125
45852
36577
29125
48286
39506
35736
29240
36391
27594
29240
40303
31347
29240
45250
37020
46347
34258
29240
29240
29240
29240
29240
29240
37020
50233
38090
37020
53737
42869
37020
58835
48144
59923
45436
37020
37020
37020
48144
63693
49542
48144
68782
54870
48144
72428
59260
48
Actuator General
Specification
Actuator General Specification
Casing
Pressure die cast ZL 16 zinc alloy.
Models 16/18/20/30 aluminium LM25.
Vane & output shaft
Models OMO, 01, 02, 03 and 05
stainless steel. Models 07 upwards
SG iron, zinc plated.
Shaft bushes
Model OMO - Delrin brushes.
All other models - Glacier DU.
Seals
Moulded polyurethane. High and low
temp seals also available - contact
Kinetrol.
Seal expanders
Stainless spring steel.
Couplings
Weldable mild steel, zinc plated.
Working temperature range
-20°C (-5°F) to 80°C (175°F).
Up to 100°C with high temperature seals and 150°C with
special equipment - contact Kinetrol for details.
Down to -40°C (include option ‘L’ at end of actuator coding).
Maximum working pressure
100 psi (7 bar)
Maximum overload pressure 150 psi (10 bar)
Spring fail-safe electric actuators
Kinetrol’s electrohydraulic actuator is designed for use in areas with out
compressed air. A hydraulic pump delivers pressurised oil to a Kinetrol quarter
turn actuator, providing double acting torque outputs of up to 1220 Nm/10800
lbf.in. On power failure a Kinetrol spring return and fail-open solenoid valve
produce a positive fail-safe action. A pressure release valve and 100% rated
pump provide stall protection. This together with this units capacity for 3000
starts per hour make it ideal for high cycle double acting and modulating
applications.
Stainless Steel Enclosures
The unique Stainless Steel Enclosure is designed specifically for use in
industries such as dairy, food, beverage and pharmaceuticals where hygiene
is a primary issue.
The Stainless Steel Enclosures are available for Kinetrol actuator models 03
to 09, with a range of options including choice of double acting/spring return,
limit switches, solenoid valves, serial communications, all safely inside the
316 stainless enclosure. External indication options are also available.
Rotary dampers
Kinetrol’s range of fluid dashpots are used to steady drives,
decelerate motion and damp vibration. Standard designs include
adjustable or fixed rate devices for continuous rotation or restricted
travel applications. If required Kinetrol will engineer special
dampers to suit your specification.
For more information on Kinetrol dampers ask for catalogue KF72
49

kinetrol.ps, page 1-52 @ Normalize ( Kinetrol 52pp )

Transcription

Similar documents

chapter 7

Souter Trading Brochure

rotary actuators

Qualitätsbericht 2012

Kinetrol Deadman Handles Catalog