ENHANCED BATTLE RIFLE - Sage International, Ltd.

Transcription

ALL VARIANTS
ENHANCED BATTLE RIFLE CHASSIS SYSTEMS
CHASSIS SYSTEM
M1A-M14, M1 GARAND, MINI-14®
ENHANCED BATTLE RIFLE
MODEL
M14ALCS
OVERALL LENGTH
COLLAPSED
27.5” (69.85 CM)
OVERALL LENGTH
EXTENDED
33.5” (85.10 CM)
WEIGHT
5.1 LBS (2.3 KG)
LENGTH OF PULL
COLLAPSED
9” (22.85 CM)
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
MIL-SPEC HARD ANODIZE
GRIP
ERGO® GRIP
ACCESSORIES
ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY
1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles
may require additional gunsmithing. Does NOT accept rearlugged receivers.
DETAILS
The M14ALCS Enhanced Battle Rifle
Chassis Stock System is precision
CNC machined from a solid billet of
high strength aircraft grade aluminum.
Fits Mil-Spec M1A/M14 rifles with
standard or medium weight barrels.
The M14ALCS is a drop-in chassis and
features a six position telescoping
stock and an adjustable polymer
cheek rest with two inches of vertical
adjustment.
Additionally the chassis includes five
Mil-Spec 1913 Picatinny rails, three
ambidextrous sling mounts, a
removable Kydex forend with a built in
palm swell, and a soft one inch recoil
pad.
Rigidity of the chassis increases
accuracy and reliability and is
achieved through the use of a
patented replacement operating rod
guide block. Precision machined
receiver lug recesses also eliminate
the need for additional bedding.
*SHOWN AS STANDARD MODEL
M1/M14 ENHANCED BATTLE RIFLE CHASSIS SYSTEM
PRODUCT SPECIFICATIONS
Available in black factory direct and in
other colors only through licensed
SAGE resellers.
989.739.7000
www.sageinternationalltd.com
[email protected]
M14ALCS/CV
DETAILS
OVERALL LENGTH
COLLAPSED
N/A - NO BUTT STOCK INCLUDED
OVERALL LENGTH
28” (71.12 CM)
WEIGHT
3.5 LBS (1.6 KG)
LENGTH OF PULL
COLLAPSED
The M14ALCS/CV Enhanced Battle
Rifle Chassis Stock System is
precision CNC machined from a solid
billet of high strength aircraft grade
aluminum. Fits Mil-Spec M1A/M14
rifles with standard or medium weight
barrels.
LENGTH OF PULL
EXTENDED
FINISH
GRIP
TANGODOWN® GRIP
ACCESSORIES
WARRANTY
The M14ALCS/CV is a drop-in chassis
and features a Mil-Spec five position
M4 receiver extension tube and a
TangoDown® BATTLEGRIP®.
Additionally the chassis includes four
palm swell.
SAGE resellers.
MODEL
989.739.7000
[email protected]
M14ALCS/CVFS
DETAILS
OVERALL LENGTH
COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH
33.5” (85.10 CM)
WEIGHT
5.1 LBS (2.3 KG)
LENGTH OF PULL
COLLAPSED
The M14ALCS/CVFS Enhanced Battle
barrels.
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
INTEGRAL SYNTHETIC GRIP
ACCESSORIES
WARRANTY
The M14ALCS/CVFS is a drop-in
chassis and features an all-weather
fiberglass reinforced synthetic montecarlo butt stock with an integral grip
and rubber recoil pad.
palm swell.
MODEL
SAGE resellers.
989.739.7000
[email protected]
MODEL
M14ALCS/CV16FS
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
33.5” (85.10 CM)
WEIGHT
5.1 LBS (2.3 KG)
LENGTH OF PULL
COLLAPSED
The M14ALCS/CV16FS Enhanced
Battle Rifle Chassis Stock System is
barrels.
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
The M14ALCS/CV16FS is a drop-in
chassis and features an all-weather,
non-adjustable, synthetic M16 butt
stock.
palm swell.
SAGE resellers.
989.739.7000
[email protected]
MODEL
M14ALCS/PMRI
DETAILS
OVERALL LENGTH
COLLAPSED
32.75” (83.19 CM)
OVERALL LENGTH
EXTENDED
34.25” (87.00 CM)
WEIGHT
5.5 LBS (2.50 KG)
LENGTH OF PULL
COLLAPSED
13” (33.00 CM)
The M14ALCS/PMRI Enhanced Battle
barrels.
LENGTH OF PULL
EXTENDED
14.5” (36.83 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
The M14ALCS/PMRI is a drop-in
chassis and features an adjustable
MAGPUL® PRS2® butt stock.
palm swell.
SAGE resellers.
989.739.7000
[email protected]
MODEL
M14ALCS-HB
OVERALL LENGTH
COLLAPSED
27.5” (69.85 CM)
OVERALL LENGTH
EXTENDED
33.5” (85.10 CM)
WEIGHT
5.1 LBS (2.3 KG)
LENGTH OF PULL
COLLAPSED
9” (22.85 CM)
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
DETAILS
The M14ALCS-HB Enhanced Battle
rifles with heavy weight barrels only.
The M14ALCS-HB is a drop-in chassis
and features a six position telescoping
adjustment.
pad.
*SHOWN AS STANDARD HEAVY WEIGHT MODEL
SAGE resellers.
989.739.7000
[email protected]
MODEL
M14ALCS/CV-HB
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
EXTENDED
28” (71.12 CM)
WEIGHT
3.5 LBS (1.6 KG)
LENGTH OF PULL
COLLAPSED
The M14ALCS/CV-HB Enhanced Battle
LENGTH OF PULL
EXTENDED
FINISH
GRIP
TANGODOWN® GRIP
ACCESSORIES
WARRANTY
The M14ALCS/CV-HB is a drop-in
chassis and features a Mil-Spec five
position M4 receiver extension tube
and a TangoDown® BATTLEGRIP®.
palm swell.
SAGE resellers.
989.739.7000
[email protected]
MODEL
M14ALCS/CVFS-HB
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
EXTENDED
33.5” (85.10 CM)
WEIGHT
5.1 LBS (2.3 KG)
LENGTH OF PULL
COLLAPSED
The M14ALCS/CVFS-HB Enhanced
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ACCESSORIES
WARRANTY
The M14ALCS/CVFS-HB is a drop-in
palm swell.
SAGE resellers.
989.739.7000
[email protected]
MODEL
M14ALCS/PMRI-HB
DETAILS
OVERALL LENGTH
COLLAPSED
32.75” (83.19 CM)
OVERALL LENGTH
EXTENDED
34.25” (87.00 CM)
WEIGHT
5.5 LBS (2.5 KG)
LENGTH OF PULL
COLLAPSED
13” (33.00 CM)
The M14ALCS/PMRI-HB Enhanced
LENGTH OF PULL
EXTENDED
14.5” (36.83 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
The M14ALCS/PMRI-HB is a drop-in
palm swell.
SAGE resellers.
*SHOWN AS STANDARD HEAVY BARREL MODEL
989.739.7000
[email protected]
MODEL
M1GALCS
DETAILS
OVERALL LENGTH
COLLAPSED
33.25” (84.45 CM)
OVERALL LENGTH
EXTENDED
39.50 (100.33 CM)
WEIGHT
5.5 LBS (2.50 KG)
LENGTH OF PULL
COLLAPSED
9” (22.85 CM)
The M1GALCS Enhanced Battle Rifle
Fits Mil-Spec M1 Garand rifles with
standard length barrels.
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
may require additional gunsmithing.
The M1GALCS is a drop-in chassis
and features a six position telescoping
adjustment.
pad.
M1 GARAND ENHANCED BATTLE RIFLE CHASSIS SYSTEM
SAGE resellers.
989.739.7000
[email protected]
MODEL
M1GALCS/CV
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
EXTENDED
34.25” (87.00 CM)
WEIGHT
4.0 LBS (1.81 KG)
LENGTH OF PULL
COLLAPSED
The M1GALCS/CV Enhanced Battle
aluminum. Fits Mil-Spec M1 Garand
rifles with standard length barrels.
LENGTH OF PULL
EXTENDED
FINISH
GRIP
TANGODOWN® GRIP
ACCESSORIES
WARRANTY
The M1GALCS/CV is a drop-in chassis
M4 receiver extension tube and a
TangoDown® BATTLEGRIP®.
palm swell.
SAGE resellers.
989.739.7000
[email protected]
MODEL
M1GALCS/CVFS
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
39.50 (100.33 CM)
WEIGHT
5.5 LBS (2.50 KG)
LENGTH OF PULL
COLLAPSED
The M1GALCS/CVFS Enhanced Battle
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ACCESSORIES
WARRANTY
The M1GALCS/CVFS is a drop-in
palm swell.
Available in a black factory direct and
in other colors only through licensed
SAGE resellers.
989.739.7000
[email protected]
MODEL
M1GALCS/CV16FS
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
EXTENDED
39.50 (100.33 CM)
WEIGHT
5.5 LBS (2.50 KG)
LENGTH OF PULL
COLLAPSED
The M1GALCS/CV16FS Enhanced
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
The M1GALCS/CV16FS is a drop-in
stock.
palm swell.
SAGE resellers.
989.739.7000
[email protected]
MODEL
M1GALCS/PMRI
DETAILS
OVERALL LENGTH
COLLAPSED
36.75” (93.35 CM)
OVERALL LENGTH
EXTENDED
38.25” (97.16 CM)
WEIGHT
5.6 LBS (2.54 KG)
LENGTH OF PULL
COLLAPSED
13” (33.00 CM)
The M1GALCS/PMRI Enhanced Battle
LENGTH OF PULL
EXTENDED
14.5” (36.83 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
The M1GALCS/PMRI is a drop-in
palm swell.
Available in a black factory direct and
in other colors only through licensed
SAGE resellers.
989.739.7000
[email protected]
MINIALCS/CV
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
25.5” (64.8 CM)
WEIGHT
3.1 LBS (1.40 KG)
LENGTH OF PULL
COLLAPSED
The MINIALCS/CV Enhanced Battle
aluminum. Fits Ruger Mini-14®
Autoloading Rifles.
LENGTH OF PULL
EXTENDED
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
* Not compatible with the Mini-30®, or the 180 series of the
Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger
& Co.
The MINIALCS/CV is a drop-in chassis
M4 receiver extension tube and a soft
ERGO® Grip.
palm swell.
achieved through the use of barrel
tension adjustment screws. Precision
machined receiver lug recesses also
eliminate the need for additional
bedding.
other colors/variations only through
licensed SAGE resellers.
MODEL
MINI-14 ® CHASSIS STOCK SYSTEM
989.739.7000
[email protected]
MINIALCS/CVFS
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
EXTENDED
30.5” (77.5 CM)
WEIGHT
3.4 LBS (1.54 KG)
LENGTH OF PULL
COLLAPSED
The MINIALCS/CVFS Enhanced Battle
Autoloading Rifles.
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
& Co.
The MINIALCS/CVFS is a drop-in
chassis and features a Mil-Spec five
position M4 receiver extension tube
and a soft ERGO® Grip.
palm swell.
bedding.
MODEL
989.739.7000
[email protected]
MINIALCS/CV16FS
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
EXTENDED
30.5” (77.5 CM)
WEIGHT
3.4 LBS (1.54 KG)
LENGTH OF PULL
COLLAPSED
The MINIALCS/CV16FS Enhanced
Autoloading Rifles.
LENGTH OF PULL
EXTENDED
15” (38.10 CM)
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
& Co.
The MINIALCS/CV16FS is a drop-in
stock and a soft ERGO® Grip.
palm swell.
bedding.
MODEL
989.739.7000
[email protected]
MODEL
M1CALCS/CV
DETAILS
OVERALL LENGTH
COLLAPSED
N/A – NO BUTT STOCK INCLUDED
OVERALL LENGTH
26” (66.04 CM)
WEIGHT
2.4 LBS (1.08 KG)
LENGTH OF PULL
COLLAPSED
The M1CALCS/CV Enhanced Battle
aluminum. Fits Mil-Spec M1 Carbine
Autoloading Rifles.
LENGTH OF PULL
EXTENDED
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
The M1CALCS/CV is a drop-in chassis
ERGO® Grip.
Mil-Spec 1913 Picatinny rails, dual
push button rear sling studs, and 360°
ventilation cuts to help dissipate heat.
bedding.
ENHANCED TACTICAL CARBINE CHASSIS
* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED
M1 CARBINE CHASSIS SYSTEM
989.739.7000
[email protected]
MODEL
SKSCS/CV
DETAILS
OVERALL LENGTH
COLLAPSED
OVERALL LENGTH
30.50” (77.5 CM)
WEIGHT
2.3 LBS (1.0 KG)
The SKSCS/CV Enhanced Battle Rifle
Fits all factory original SKS rifles.
LENGTH OF PULL
COLLAPSED
LENGTH OF PULL
EXTENDED
FINISH
GRIP
ERGO® GRIP
ACCESSORIES
WARRANTY
ENHANCED SKS CHASSIS
* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED
SKS CHASSIS STOCK SYSTEM
The SKSCS/CV is a drop-in chassis
ERGO® Grip.
Ventilation cuts in the chassis and
hand-guard help to quickly dissipate
heat. Option tri-rail kit is available for
quickly mounting accessories.
accuracy and reliability. Eliminates the
need for additional bedding.
989.739.7000
[email protected]
& EQUIPMENT
ALL VARIANTS
EBR ACCESSORIES & EQUIPMENT
ACCESSORIES & EQUIPMENT
EBR ACCESSORIES
*SHOWN WITH OPTIONAL EXTRAS – RIFLE & CHASSIS NOT INCLUDED
MODEL
M14SCSB
DETAILS
RAIL LENGTH
1.00” (2.54 CM)
OVERALL LENGTH
1.25” (3.18 CM)
OVERALL HEIGHT
.45” (1.13 CM)
WEIGHT
.1 LBS (.05 KG)
The M14SCSB (Stripper Clip Sight
Base) is a 1913 Picatinny Rail insert
specifically designed for use on MilSpec M1/M14 rifles that are installed in
a SAGE M14 EBR Chassis Stock
Systems.
FINISH
BLACK NITRIDE
ACCESSORIES
NOT APPLICABLE
WARRANTY
The M14SCSB is precision machined
from ordnance grade steel and
replaces the existing factory stripper
clip guide. The base permits in-line
mounting of scoped optics and
accessories.
Includes a stainless steel set screw
and installation does not require any
permanent modifications to the rifle or
sight base.
The SAGE M14SCSB is NOT designed
to align with other NON-SAGE chassis
stock systems.
Fitting SAGE M14SCSB to non MilSpec/Commercial rifles may require
additional gunsmithing.
M1/M14 STRIPPER CLIP
The M14SCSB shape also allows clear
through access to the ejection port.
SIGHT BASE
989.739.7000
[email protected]
M14DCSB
DETAILS
RAIL LENGTH
6.75” (17.15 CM)
OVERALL LENGTH
9.75” (24.76 CM)
OVERALL HEIGHT
.85” (2.16 CM)
WEIGHT
.5 LBS (.22 KG)
The M14DCSB (Detachable
Cantilevered Sight Base) is a precision
CNC machined, aluminum removable
1913 Picatinny Rail sight base. Fits all
SAGE M14 EBR Chassis Stock
Systems.
FINISH
ACCESSORIES
WARRANTY
The M14DCSB completely bridges the
M14 action back to the rear sight and
is fully adjustable for oversized or
undersized rails. It features a positive
cam locking mechanism that allows
rail surfaces to be engaged by flat
non-scuffing pads.
Additionally the sight base is fully
supported on both ends, providing
superior rigidity and reliable rezeroing of optics.
MODEL
M1/M14 DETACHABLE CANTILEVERED SIGHT BASE
Includes an all steel construction
stripper clip insert with a stainless
steel set screw and a stainless steel
base adjustment screw to stop vertical
and lateral shifting. M14DCSB
installation requires no modifications
to the rifle or sight base.
SAGE resellers.
989.739.7000
[email protected]
M14VFG
DETAILS
MATERIAL
HARD PLASTIC
OVERALL WIDTH
1.25” (3.18 CM) AT WIDEST POINT
OVERALL HEIGHT
4.5” (11.43 CM)
The M14VFG (Vertical Fore-Grip) is
specifically designed for use on
M1/M14, M1 GARAND, & MINI-14/30®
SAGE EBR Chassis Stock Systems.
WEIGHT
.4 LBS (.18 KG)
COLOR
BLACK
WARRANTY
The M14VFG attaches to the underside
of an EBR Stock via a knurled thumbtype screw and is secured by an
integral guide pin.
Constructed using the highest quality
materials, the M14VFG is lightweight
and extremely durable. The M14VFG
provides additional control during
rapid fire and can be removed easily
and quickly by adjusting the threaded
core.
MODEL
M1/M14 VERTICAL FORE-GRIP
Not designed to be used with other
manufacturers chassis systems or
stocks.
989.739.7000
[email protected]
MODEL
M14APRS
DETAILS
MATERIAL
ALUMINUM
OVERALL LENGTH
2” (5.08 CM)
OVERALL HEIGHT
.40” (1.02 CM)
The M14APRS (Adapter Picatinny Rail
Section) is specifically designed for
use on M1/M14, M1 GARAND, & MINI14/30® SAGE EBR Chassis Stock
Systems.
WEIGHT
.8 OZ (.02 KG)
FINISH
HARD ANODIZE
WARRANTY
The M14APRS attaches to the
underside of an EBR Stock via two
screws and facilitates the mounting of
aftermarket vertical fore-grips without
removing the protective Kydex
forearm.
Precision machined from aircraft
grade aluminum and finished with
Mil-Spec hard anodizing.
*DOES NOT INCLUDE RIFLE OR CHASSIS
M1/M14 ADAPTER PICATINNY RAIL SECTION
The M14APRS is also movable
forward and aft four (4) positions
to allow for further range of foregrip placement. Fits same hole
pattern as the SAGE M14VFG.
Includes two (2) mounting screws.
989.739.7000
[email protected]
MODEL
M14ERGO
DETAILS
MATERIAL
TEXTURED RUBBER AND PLASTIC
OVERALL WIDTH
OVERALL HEIGHT
4.5” (11.43 CM)
The M14ERGO is a soft textured pistol
grip specifically designed for use on
MOD-0 style M1/M14 & M1 GARAND
SAGE EBR Chassis Stock Systems.
WEIGHT
.2 LBS (.09 KG)
COLOR
BLACK OR TAN (PLEASE SPECIFY)
WARRANTY
Manufactured to SAGE EBR
specifications for the proper function
of the MOD-0 telescoping stock, the
M14ERGO will not function with other
manufacturers chassis systems or
stocks.
The M14ERGO replaces the old style
EBR hard plastic grip. Features
ergonomically correct finger grooves
and is virtually impervious to
oils/solvents.
M1/M14 ERGO GRIP
Textured finish offer operators better
control and features a bottom storage
with tethered rubber plug.
Ambidextrous design. Not designed
for use with other manufacturers
chassis systems or stocks. Only
available from SAGE or authorized
SAGE resellers/distributors.
989.739.7000
[email protected]
M14FACC
DETAILS
MATERIAL
ALUMINUM
OVERALL LENGTH
1.85” (4.70 CM)
OVERALL HEIGHT
.65” (1.65 CM) AT TALLEST POINT
WEIGHT
.2 OZ (.005 KG)
The M14FACC (Full Auto Cut-Out
Cover) is specifically designed to
fill the full auto selector clearance
cut on M1/M14 SAGE EBR Chassis
Stock Systems.
COLOR
BLACK
FINISH
HARD ANODIZE
WARRANTY
The M14FACC is precision CNC
machined from billet aircraft grade
aluminum and is finished in a hard
anodize.
Prevents dirt & debris from
entering action and features two
upper guide pins to prevent
shifting while installed in the
chassis system.
MODEL
M1/M14 FULL AUTO CUT-OUT COVER
Manufactured to SAGE EBR
specifications and is not
compatible with other M1/M14
stock systems.
Only available from SAGE or
authorized SAGE
resellers/distributors.
989.739.7000
[email protected]
M14BEK
DETAILS
MATERIAL
ALUMINUM
OVERALL WIDTH
1” (2.54 CM)
OVERALL HEIGHT
4.12” (10.46 CM)
WEIGHT
.2 LBS (.09 KG)
COLOR
BLACK
The M14BEK (Buttstock Extension
Kit) is a one inch (1") buttstock
extension kit that is specifically
designed for use on MOD-0 style
M1/M14 & M1 GARAND SAGE EBR
Chassis Stock Systems.
FINISH
HARD ANODIZE
WARRANTY
The M14BEK is precision CNC
anodize.
MODEL
M1/M14 BUTTSTOCK EXTENSION KIT
Replaces the factory buttplate
intermediate spacer (Part #90911)
and increases the length of pull by
one inch (1”). Does not interfere
with adjustable cheek rest
function.
authorized SAGE
Includes mounting hardware.
989.739.7000
[email protected]
M14VABEK/ALCS
MATERIAL
ALUMINUM
OVERALL WIDTH
OVERALL HEIGHT
5.25” (13.33 CM)
WEIGHT
.4 LBS (.18 KG)
COLOR
BLACK
FINISH
HARD ANODIZE
WARRANTY
DETAILS
The M14VABEK/ALCS (Vertical
Adjustable Buttstock Extension
Kit) is a 1.5" buttstock extension
kit that is specifically designed for
use on MOD-0 style M1/M14 & M1
GARAND SAGE EBR Chassis
Stock Systems.
The M14VABEK/ALCS is precision
CNC machined from billet aircraft
grade aluminum and is finished in
a hard anodize.
1.5”. Does not interfere with
adjustable cheek rest function.
Also allows for 1.5” of vertical
buttplate adjustment.
authorized SAGE
MODEL
M1/M14 VERTICAL ADJUSTABLE BUTTSTOCK EXTENSION KIT
989.739.7000
[email protected]
MODEL
M14VABEK/PMRI
DETAILS
MATERIAL
ALUMINUM
OVERALL LENGTH
1.5” (3.8 CM)
OVERALL HEIGHT
4.75” (12.06 CM)
WEIGHT
.4 LBS (.18 KG)
COLOR
BLACK
The M14VABEK/PMRI (Vertical
Adjustable Buttstock Extension
Kit) is a 1.5" buttstock extension
use on PMRI style M1/M14 & M1
Stock Systems.
FINISH
HARD ANODIZE
WARRANTY
The M14VABEK/PMRI is precision
CNC machined from billet aircraft
grade aluminum and is finished in
a hard anodize.
1.5”. Does not interfere with
adjustable cheek rest function.
Also allows for 1.5” of vertical
buttplate adjustment.
authorized SAGE
*RIFLE AND CHASSIS NOT INCLUDED
M1/M14 VERTICAL ADJUSTABLE BUTTSTOCK EXTENSION KIT
989.739.7000
[email protected]
M14ALCS-BS
MATERIAL
ALUMINUM & STEEL
LENGTH OF PULL
EXTENDED
15” (38.1 CM)
LENGTH OF PULL
COLLAPSED
9” (22.86 CM)
WEIGHT
2.4 LBS (1.08 KG)
COLOR
BLACK (ADDITIONAL COLORS VARY)
FINISH
HARD ANODIZE & BLACK NITRIDE
GRIP
ERGO® GRIP
WARRANTY
DETAILS
The M14ALCS-BS is a complete
telescoping buttstock conversion
use on M1/M14 & M1 GARAND
SAGE EBR Chassis Stock
Systems.
Converts EBR stocks to ALCS
(MOD-0) style. Telescoping design
provides six (6) length positions.
Adjustable cheek rest has two
inches (2") of travel in one quarter
inch (.25") increments.
MODEL
M1/M14 TELESCOPING BUTTSTOCK (MOD-O)
Features a self stowing tensioning
wrench to securely lock cheek rest
into position. Aluminum parts are
Mil-Spec hard anodize & all steel
components are black nitride
finished.
authorized SAGE
Includes mounting hardware and
sling plate.
989.739.7000
[email protected]
M14ALCS/CVFS-BS
DETAILS
MATERIAL
SYNTHETIC PLASTIC
OVERALL LENGTH
13.75” (34.92 CM)
OVERALL HEIGHT
5” (12.7 CM) AT TALLEST POINT
WEIGHT
1.4 LBS (.63 KG)
COLOR
BLACK
The M14ALCS/CVFS-BS is a
synthetic fixed buttstock
conversion kit that is specifically
designed for use on M1/M14 & M1
Stock Systems.
GRIP
INTEGRAL SEMI-PISTOL GRIP
WARRANTY
Converts EBR stocks to
ALCS/CVFS (fixed stock) style. All
weather fiberglass reinforced
synthetic stock features scratchresistant finish that resists wear.
MODEL
M1/M14 FIXED SYNTHETIC BUTTSTOCK
Features a Monte-Carlo style cheek
rest and checkered integral semipistol grip. Includes 1" rubber
recoil pad & double front sling
loop plate.
Only available from SAGE or an
authorized SAGE
sling plate.
989.739.7000
[email protected]
DETAILS
MODEL
M14ALCS/PMRI-BS
MATERIAL
ALUMINUM
OVERALL LENGTH
13” (33.02 CM)
COLLAPSED
14.5” (36.83 CM)
EXTENDED
OVERALL HEIGHT
6.25” (15.87 CM) DOWN
8” (20.32 CM) UP
WEIGHT
2.7 LBS (1.22 KG)
COLOR
BLACK
GRIP
INTEGRAL SEMI-PISTOL GRIP
WARRANTY
The M14ALCS/PMRI-BS is
MAGPUL® PRS2™ butt stock
conversion kit that is specifically
designed for use on M1/M14 & M1
Stock Systems. Assembly consists
of sling plate attachment,
MAGPUL® PRS2™ butt stock,
ERGO grip, and mounting
hardware.
Converts EBR stocks to
ALCS/PMRI (MOD-2) style.
Features an adjustable machined
butt-plate, steel adjustment shafts,
and machined adjustment knobs
with positive-locking detents.
M1/M14 PMRI BUTTSTOCK
Stock also includes an adjustable
cheek rest and rubber recoil pad.
Only available from SAGE or an
authorized SAGE
sling plate.
989.739.7000
[email protected]
MODEL
PMRI-MR
DETAILS
MATERIAL
ALUMINUM
OVERALL LENGTH
4” (10.16 CM)
WEIGHT
.1 LBS (.05 KG)
The PMRI-MR is Picatinny rail
specifically designed for monopod
or sling mounting on MAGPUL®
PRS2™ stock systems.
COLOR
BLACK
FINISH
HARD ANODIZE
WARRANTY
The PMRI-MR is precision CNC
anodize.
authorized SAGE
*SHOWN WITH OPTIONAL EXTRAS
M1/M14 PMRI PICATINNY RAIL
989.739.7000
[email protected]
MODEL
PMRI-FR
DETAILS
MATERIAL
ALUMINUM
OVERALL LENGTH
4” (10.16 CM)
WEIGHT
.1 LBS (.05 KG)
The PMRI-FR is Picatinny rail
specifically designed for sling and
accessory mounting on MAGPUL®
PRS2™ stock systems.
COLOR
BLACK
FINISH
HARD ANODIZE
WARRANTY
The PMRI-FR is precision CNC
anodize.
authorized SAGE
M1/M14 PMRI PICATINNY RAIL
989.739.7000
[email protected]
ALL VARIANTS
SHOTGUN STOCKS
ALL VARIANTS
SHOTGUN STOCKS
TS870R
DETAILS
LENGTH OF PULL
EXTENDED
14.25” (36.19 CM)
LENGTH OF PULL
COLLAPSED
8.25” (20.95 CM)
WEIGHT
2.6 LBS (1.17 KG)
The TS870R is a telescoping
shotgun stock made for standard
12 gauge Remington® 870
shotguns.
FINISH
BLACK NITRIDE
GRIP
ERGO® GRIP
WARRANTY
The stock is all steel construction
and features a soft textured
ERGO® grip and 1” soft rubber
recoil pad.
SHOTGUN STOCKS
MODEL
870 TELESCOPING SHOTGUN STOCK
Quickly installs via a replacement
receiver extension and stock bolt.
authorized SAGE
989.739.7000
[email protected]
TS880RLW
DETAILS
LENGTH OF PULL
EXTENDED
15” (38.1 CM)
LENGTH OF PULL
COLLAPSED
9” (22.86 CM)
WEIGHT
1.8 LBS (.82 KG)
The TS880RLW is a lightweight
telescoping shotgun stock made
for standard 12 gauge Remington®
870 shotguns.
FINISH
HARD ANODIZE
GRIP
ERGO® GRIP
WARRANTY
The stock is aluminum
construction and features a soft
textured ERGO® grip and 1” soft
rubber recoil pad.
SHOTGUN STOCKS
MODEL
870 TELESCOPING SHOTGUN STOCK
authorized SAGE
989.739.7000
[email protected]
*TSAR-1 NOT SHOWN
MODEL
LENGTH OF PULL
EXTENDED
LENGTH OF PULL
COLLAPSED
TSAR-1
10.75” (27.30 CM)
NO STOCK
TSAR-2
14.25” (36.20 CM)
MOE® STOCK
11” (27.94 CM)
WEIGHT
1.0 LBS (.45 KG)
FINISH
HARD ANODIZE
GRIP
ERGO® GRIP
WARRANTY
SHOTGUN STOCKS
870 SHOTGUN STOCK
DETAILS
The TSAR is a collapsible shotgun
stock made for standard 12 gauge
Remington® 870 shotguns.
1.4 LBS (.64 KG)
rubber recoil pad.
The TSAR-2 features a MAGPUL®
MOE® stock. The TSAR-1 features
a Mil-Spec M4 tube to allow
operators to mount their own butt
stock.
authorized SAGE
989.739.7000
[email protected]
*TSAM-1 NOT SHOWN
MODEL
LENGTH OF PULL
EXTENDED
LENGTH OF PULL
COLLAPSED
TSAM-1
11.5” (29.21 CM)
NO STOCK
TSAM-2
DETAILS
15” (38.10 CM)
The TSAM is a collapsible shotgun
stock made for standard 12 gauge
Mossberg® 500 shotguns.
11.5” (29.21 CM)
WEIGHT
1.0 LBS (.45 KG)
FINISH
HARD ANODIZE
GRIP
ERGO® GRIP
WARRANTY
SHOTGUN STOCKS
500 SHOTGUN STOCK
1.4 LBS (.64 KG)
rubber recoil pad.
The TSAM-2 features a MAGPUL®
MOE® stock. The TSAM-1 features
a Mil-Spec M4 tube to allow
operators to mount their own butt
stock.
authorized SAGE
989.739.7000
[email protected]
ALL VARIANTS
SHOTGUN ACCESSORIES
ALL VARIANTS
SHOTGUN ACCESSORIES
MET6/870
MET7/870
MET8/870
DETAILS
CAPACITY
6 ROUNDS
7 ROUNDS
8 ROUNDS
BARREL LENGTH
14.5”
18”
20”
FINISH
BLACK NITRIDE
SAGE MET (Magazine Extension
Tube) Kits are manufactured for
standard frame 12 gauge
WARRANTY
They are available in three (3)
sizes:
 Six Shot Capacity
 Seven Shot Capacity
 Eight Shot Capacity
(Includes one round in
chamber).
SHOTGUN ACCESSORIES
MODEL
870 MAGAZINE EXTENSION TUBE KITS
Each kit contains a coupler,
spring, magazine tube extension
and barrel/magazine tube clamp.
authorized SAGE
989.739.7000
[email protected]
DESCRIPTION
STBC
BATTLECLAMP – BARREL CLAMP
MATERIAL
ALUMINUM
WEIGHT
3.3 OZ (0.09 KG)
FINISH
HARD ANODIZE
WARRANTY
DETAILS
The Sage BATTLECLAMP Barrel
Clamp secures magazine extension
tube kits and allows numerous
accessories to be mounted easily
and quickly.
Accepts most 1” diameter weapon
lights. The STBC is reversible and
features a single point button sling
cup and a 1.5" MIL-STD 1913
Picatinny rail for mounting
additional accessories.
Blackened stainless steel Allen head
screws bring the clamp halves
together.
Fits Remington 870, 1100, 11-87 and
Benelli M1, M2, M4, M1014, 12 gauge
shotguns.
ENHANCED TACTICAL CARBINE CHASSIS
MODEL
BATTLECLAMP – BARREL CLAMP
989.739.7000
[email protected]
PSMHG / SSMHG
MODEL
DESCRIPTION
DETAILS
PSMHG
PLAIN STEEL MUZZLE HAND GUARD
SSMHG
STAINLESS STEEL MUZZLE HAND GUARD
The SAGE MHGISL is a combination
Hand Guard and Side Sling for left
handed shooters.
MHGISL
PLAIN STEEL MUZZLE HAND GUARD – LEFT HAND
MHGISR
PLAIN STEEL MUZZLE HAND GUARD – RIGHT HAND
WARRANTY
The SAGE MHGISR is a combination
Hand Guard and Side Sling for right
handed shooters.
SHOTGUN ACCESSORIES
MHGISR / MSGISL
SHOTGUN MUZZLE HAND GUARDS
The MHGISL and the MHGISR muzzle
hand guards are made of plain steel and
feature a black nitride finish. Fits 12
gauge Remington® 870, 1100 & 11-87
shotguns.
The SAGE PSMHG is a plain steel
Muzzle Hand-Guard with a bottom sling
loop and a black nitride finish.
The SAGE SSMHG is a stainless steel
Muzzle Hand-Guard with a bottom sling
loop. Fits 12 gauge Remington® 870,
1100 & 11-87 shotguns.
authorized SAGE
989.739.7000
[email protected]
MODEL
DESCRIPTION
SSR870R
FRONT OFFSET SLING ATTACHMENT – RIGHT HAND
SSR870L
FRONT OFFSET SLING ATTACHMENT – LEFT HAND
SSM590R
FRONT OFFSET SLING ATTACHMENT – RIGHT HAND
SSM590L
FRONT OFFSET SLING ATTACHMENT – LEFT HAND
WARRANTY
DETAILS
The SSR870R and SSR870L are offset
shotgun sling fittings. Fits 12 gauge
Remington® 870 shotguns and can be
used with a variety of SureFire® forend
lights.
SHOTGUN ACCESSORIES
SHOTGUN SLING FITTINGS
The SSM590R and SSM590L are offset
shotgun sling fittings. Fits 12 gauge
Mossberg® 590 shotguns and can be
used with a variety of SureFire® forend
lights.
Each model features a 1.25” sling loop.
All steel construction and finished in a
black nitride. Easy to install and does
not require any modifications to the
shotgun.
authorized SAGE
989.739.7000
[email protected]
VFG8W
MODEL
DESCRIPTION
DETAILS
VFG8P
VERTICAL FORE-GRIP - PLAIN
VFG8W
VERTICAL FORE-GRIP – W/ TWO (2) PICATINNY RAILS
The VFG8P is a plain steel vertical
fore-grip featuring a hollow plastic
grip.
LENGTH
5.75” (14.60 CM)
WEIGHT
.6 LBS (.27 KG)
WARRANTY
SHOTGUN ACCESSORIES
VFG8P
SHOTGUN VERTICAL FORE-GRIPS
The VFG8W is a steel vertical foregrip with dual side Picatinny rails
and a hollow plastic grip. Both
models are designed to fit 12 gauge
SAGE shotgun vertical fore-grips
help increase weapon control and
retention.
Additionally the SAGE VFG8W
allows accessories to be easily
mounted via the dual Picatinny rails.
No permanent modification to the
shotgun is necessary with either
model.
Easy to install and remove. Only
989.739.7000
[email protected]
NON-SHROUDED GHOST RING SIGHT KITS
MODEL
DESCRIPTION
SGRSK/812NS
FITS .817" - .827" BARRELS
SGRSK/828NS
SGRSK/843NS
SGRSK/843MNS
FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590)
SGRSK/860NS
SGRSK/875NS
WARRANTY
SHROUDED GHOST RING SIGHT KITS
MODEL
DESCRIPTION
SGRSK/812
SGRSK/828
SGRSK/843
SGRSK/843M
FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590)
SGRSK/860
SGRSK/875
WARRANTY
SHROUDED
DETAILS
SAGE Shrouded and Non-Shrouded
Ghost Ring Sight Kits are available in a
variety of sizes to accommodate most
shotgun barrels.
Mounting consists of drilling and
tapping three holes, no other
modifications are necessary.
SHOTGUN ACCESSORIES
NON-SHROUDED
SHOTGUN GHOST RING SIGHT KITS
All steel construction and features a
black nitride finish. Fits barrels with
muzzle OD in the .817" to .890"
range.
Shrouded model protects sight &
help with visual alignment
No bead is included. Red fiber-optic,
green fiber-optic and self powered
Tritium is available as an additional
item.
Easy to install and remove. Only
989.739.7000
[email protected]
MODEL
DESCRIPTION
FRS1187
FORCE-RS LIGHT MOUNT - ACCEPTS 1” DIAMETER
LIGHTS
MATERIAL
STEEL
WEIGHT
.3 LBS (.14 LBS)
FINISH
BLACK NITRIDE
WARRANTY
DETAILS
The SAGE FRS1187 is a FORCE-RS
Light Mount designed to fit 12 gauge
Remington® 1100 & 11-87 shotguns.
SHOTGUN ACCESSORIES
*SHOTGUN & FLASHLIGHT NOT INCLUDED
SHOTGUN LIGHT MOUNT
Accepts all 1" diameter flashlights
or lasers. Light or laser attaches via
heavy duty compression collar
clamping system.
Machined from steel and finished in
durable black nitride.
Easy to install and remove. No
modifications to the shotgun are
required.
authorized SAGE
989.739.7000
[email protected]
ACCESSORIES
ALL VARIANTS
M4 & M16 VARIANT ACCESSORIES
ALL VARIANTS
M4 & M16 VARIANT
IPS/MM12
IPS/MM12RG
DETAILS
MODEL
DESCRIPTION
IPS/MM12
M16 INTERBAR SYSTEM – DIRECT MOUNT FOR 12 GAUGE
SHOTGUN. FITS COLT 723, M4, AND 9MM SMG.
IPS/MM12RG
M16 INTERBAR SYSTEM – INCLUDES RAIL GRABBER
DEVICE. FITS COLT 723, M4, AND 9MM SMG.
MATERIAL
ALUMINUM
LENGTH
10.75” (27.30 CM)
WEIGHT
IPS/MM12
.8 LBS (.36 KG)
IPS/MM12RG
1.2 LBS (.54 KG)
FINISH
HARD ANODIZE
WARRANTY
The IPS/MM12 is an INTERBAR
system designed for Colt 723, M4,
and 9mm SMG. The IPS bar is drilled
to direct mount a 12 gauge shotgun
via four mounting screws.
Positive lock up on rifle bayonet lug
and rifle front hinge pin. Includes
INTERBAR, special bottom receiver
hinge pin and mounting hardware.
The IPS/MM12 is an INTERBAR
and 9mm SMG. The IPS bar mounts
a quick opening rail grabber for
ease of mounting or releasing the
shotgun without removing the IPS
Rail.
M16 INTERBAR SYSTEMS
Positive lock up on rifle bayonet lug
and rifle front hinge pin.
authorized SAGE
989.739.7000
[email protected]
DESCRIPTION
DETAILS
QDM4PS
M4 QUICK DETACHABLE INTEGRATED PLATFORM
MATERIAL
ALUMINUM
The QDM4PS is an INTERBAR
and 9mm SMG.
WEIGHT
1.2 LBS (.54 KG)
LENGTH
10.75” (27.30 KG)
FINISH
HARD ANODIZE
WARRANTY
The IPS bar mounts a quick opening
rail grabber for ease of mounting or
releasing the shotgun without
removing the IPS Rail. Positive lock
up on rifle bayonet lug and rifle front
hinge pin.
Accommodates breaching shotguns
and under-mount grenade
launchers.
MODEL
M4 QUICK DETACH PLATFORM
Machined from aluminum and
finished with hard anodizing.
Includes QD platform system and
mounting instructions. Only
989.739.7000
[email protected]
MODEL
DESCRIPTION
DETAILS
MHG16
M4 / M16 MUZZLE HAND GUARD
MATERIAL
STEEL
WEIGHT
.3 LBS (.14 KG)
FINISH
BLACK NITRIDE
The MHG16 an M4/M16 SMG muzzle
hand guard. It is designed to fit the
Colt 9MM SMG. It is machined from
plain steel and is finished in black
nitride.
WARRANTY
Tested and proven design that
requires no necessary rifle
modifications for installation.
Easily removable and installs in
seconds via the rifle bayonet lug.
*RIFLE NOT INCLUDED
M4 / M16 MUZZLE HAND GUARD
authorized SAGE
989.739.7000
[email protected]
*RIFLE & FLASHLIGHT NOT INCLUDED
MODEL
DESCRIPTION
DETAILS
FRSM16S
LIGHT MOUNT – FITS COLT M16/M16A2, RUGER MINI-14®
FRSM16G
LIGHT MOUNT – FITS COLT M16A2, SMG 9MM
The FRSM16S and FRSM16G are
tactical light mounts designed for a
variety of rifle platforms.
MATERIAL
STEEL
FINISH
BLACK NITRIDE
WARRANTY
The FRSM16S fits the Colt M16,
M16A2, M4 & Ruger Mini-14®.
The FRSM16G fits the Colt M16A2 &
9mm SMG.
Designed for easy removal and
installation via the rifle bayonet lug.
M4 / M16 LIGHT MOUNT
Accepts 1" diameter flashlight or
laser. Light or laser attaches via
heavy duty compression collar
clamping system.
authorized SAGE
989.739.7000
[email protected]
MOUNTING SYSTEMS
ALL VARIANTS
SPECIALIZED WEAPON MOUNTING SYSTEMS
ALL VARIANTS
SPECIALIZED WEAPON
DESCRIPTION
DETAILS
762NCSM
7.62 NATO CAPABLE SOFT MOUNT
MATERIAL
STEEL
The SAGE 762NCSM is a 7.62 NATO
capable soft mount that accepts the
M240 and M249 machine guns.
WEIGHT
6.2 LBS (2.81 KG)
FINISH
BLACK NITRIDE
WARRANTY
Includes soft mount, pintle and
pintle mounting bolt.
authorized SAGE
MODEL
7.62MM NATO CAPABLE SOFT MOUNT
989.739.7000
[email protected]
MODEL
DESCRIPTION
SMABARG
ADAPTER BAR – FITS 762NCSM AND ALLOWS MACHINE
GUN MOUNTING
MATERIAL
ALUMINUM W/ STAINLESS STEEL COMPONENTS
WEIGHT
2.0 LBS (.90 KG)
FINISH
WARRANTY
DETAILS
The SAGE SMABARG is an adaptor
bar that fits all M240 and M249 softmounts (762NCSM). Designed for
MK14 Mod-O & Mod-1 Rifle, MK 46 &
MK 48 Machine Gun.
Special gripper allows existing softmounts to provide a stable platform
for the noted rifle and machine
guns. Grips the rifle by its integral
Picatinny Rail.
No modifications to the rifle are
required. Design allows for quick
rifle mounting and removal.
All springs, pins, and components
are stainless steel for added
corrosion protection and durability.
authorized SAGE
*762NCSM NOT INCLUDED
SPECIALIZED ADAPTER BAR
989.739.7000
[email protected]
MODEL
DESCRIPTION
DETAILS
HMABARG
EQUILIBRATED ADAPTER BAR
MATERIAL
WEIGHT
1.8 LBS (.81 KG)
The SAGE HMABARG is an
equilibrated adaptor bar that fits all
conventional M240 and M249
machine gun mounts.
FINISH
WARRANTY
Designed for MK14 Mod-O & Mod-1
Rifle, MK 46 & MK 48 Machine Gun.
Special gripper is spring
equilibrated allowing a conventional
hard machine gun mount to provide
a more stable platform for the noted
rifle and machine guns.
authorized SAGE
*762NCSM NOT INCLUDED
EQUILIBRATED ADAPTER BAR
989.739.7000
[email protected]
BOTTOM VIEW
MODEL
DESCRIPTION
762RG
RAIL GRABBER – LARGE DEVICES
MATERIAL
WEIGHT
.5 LBS (.23 KG)
LENGTH
4.87” (12.36 CM)
FINISH
WARRANTY
DETAILS
The SAGE 762RG is a special
Picatinny rail grabber that allows
versatile mounting solutions with
the strength to handle 7.62 NATO
recoil.
An adjustable gripping surface
allows for positive, no slip,
Picatinny rail engagement even with
oversized or undersized rails.
authorized SAGE
TOP VIEW
RAIL GRABBER – LARGE DEVICES
989.739.7000
[email protected]
ALL VARIANTS
SECURITY PRODUCTS
ALL VARIANTS
SECURITY PRODUCTS
MODEL
DESCRIPTION
DETAILS
VTM028
VEHICLE TIRE MARKER
RCVTM
REPLACEMENT CHALK – YELLOW (144 PIECES)
LENGTH
28” (71 CM)
The SAGE VTM028 is a 28” vehicle
tire marker. Used for regulating
parking areas by marking vehicle
tires.
MATERIAL
TUBULAR STEEL & PLASTIC
WEIGHT
.8 LBS (.36 KG)
FINISH
BLACK POWDER COAT
WARRANTY
SECURITY PRODUCTS
VEHICLE TIRE MARKER
Tubular steel design and includes
an ergonomical hand grip. Features
a black powder coat finish.
Flexible tubular chalk holder for
large diameter chalk. Chalk sold as
a separate item-144 pieces per box.
authorized SAGE
989.739.7000
[email protected]
MODEL
DESCRIPTION
PIM1300C
ADJUSTABLE 26”-43”, 5” CONVEX GLASS
PIM1400C
PIM1500C
PIM1600C
ADJUSTABLE 47”-77”, ARMREST, 8” CONVEX GLASS
PIM1300AF
ADJUSTABLE 26”-43”, 5” FLAT ACRYLIC
PIM1400AF
PIM1500AF
PIM1600AF
ADJUSTABLE 47”-77”, ARMREST, 8” FLAT ACRYLIC
PIM1700C
ADJUSTABLE 47”-77”, LED LIGHTS, 12” CONVEX
FINISH
BLACK POWDER COAT
WARRANTY
DETAILS
SAGE manufactures a variety of
Premier Inspection Mirrors to
accommodate most security and
inspection needs.
SECURITY PRODUCTS
*NOT ALL MODELS SHOWN
PREMIER INSPECTION MIRRORS
Most PIM models feature Convex
Glass or Flat Acrylic mirrors and are
able to fold for compact storage and
transport.
Lengths vary from 26” to 77” and all
models will fully telescope via the
included adjustable twist lock.
All models feature a non-slip rubber
grip handle.
authorized SAGE
989.739.7000
[email protected]
DIAMETER
12” (30.48cm) CONVEX
LENGTH COLLAPSED
47” (119.38cm)
LENGTH EXTENDED
80” (203.20cm)
MIRROR OVER
GROUND HEIGHT
CHASSIS GROUND
CLEARANCE HEIGHT
CASTERS ONLY
3.33” (84.6mm)
WITH ¼” RISER KIT
3.58” (90.9mm)
WITH ½” RISER KIT
3.83” (97.3mm)
WITH ¾” RISER KIT
4.08” (103.6mm)
CASTERS ONLY
.160” (4.1mm)
WITH ¼” RISER KIT
.410” (10.4mm)
WITH ½” RISER KIT
.660” (16.8mm)
WITH ¾” RISER KIT
.910” (23.1mm)
BATTERIES
NOT INCLUDED (TWO 9-VOLT REQUIRED)
LIGHTS
TWO (2) LED LIGHTBARS
FINISH
BLACK POWDER COAT
WARRANTY
DETAILS
The Sage PIM1700 Premier Inspection Mirror is a 12”
convex acrylic security mirror that features an adjustable
telescoping handle from 47” to 80” to accommodate
most security and inspection needs.
SECURITY PRODUCTS
PIM1700
PIM1700 PREMIER INSPECTION MIRROR
MODEL
The PIM1700 features three (3) smooth casters and
multiple riser kit combinations so that chassis ground
clearance height can be easily adjusted to accommodate
varying surface conditions.
The dual LED light bars are illuminated by a waterproof
switch located on the underside of the grip. The dual LED
lights are angled specifically to give the operator a clear
and bright presentation during the inspection process.
Features a non-slip rubber grip handle and durable black
powder coat finish. Only available from Sage or
authorized Sage distributors.
989.739.7000
[email protected]
MODEL
DESCRIPTION
IMFL/12
FIXED LENGTH, 12”, 5” CONVEX GLASS MIRROR
IMFL/30
FIXED LENGTH 30”, 5” CONVEX GLASS MIRROR
IMFL/40
FIXED LENGTH 40”, 5” CONVEX GLASS MIRROR
IMTAL/8
TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8”
CONVEX GLASS MIRROR, WITH WHEEL KIT & WITH
FLASHLIGHT HOLDER
IMTAL/5
TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5”
CONVEX GLASS MIRROR, WITHOUT WHEEL KIT & WITH
FLASHLIGHT HOLDER
IMHHPM
HAND HELD PERSONAL MIRROR 3” X 5”
IMFL/12(AF)
FIXED LENGTH, 12”, 5” FLAT ACRYLIC MIRROR
IMFL/30(AF)
IMFL/40(AF)
IMTAL/8(AF)
TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8” FLAT
ACRYLIC MIRROR, WITH WHEEL KIT & WITH FLASHLIGHT
HOLDER
IMTAL/5(AF)
TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5” FLAT
ACRYLIC MIRROR WITHOUT WHEEL KIT & WITH
FLASHLIGHT HOLDER
FINISH
BLACK POWDER COAT
WARRANTY
DETAILS
SAGE manufactures a variety of
Standard Inspection Mirrors to
accommodate most security and
inspection needs.
SECURITY PRODUCTS
*NOT ALL MODELS SHOWN
STANDARD INSPECTION MIRRORS
Most SIM models feature Convex
Glass or Flat Acrylic mirrors and
many are offered with integral
flashlight holders.
Lengths vary from 12” to 60”.
Certain models are offered with
telescoping capabilities.
authorized SAGE
989.739.7000
[email protected]
ALL VARIANTS
EBR REPLACEMENT PARTS
ALL VARIANTS
PART #
90900
90901
90987
88
90988
90
90990
3
4
5
90903
90904
M14ERGO
7
90907
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
90908
90909
90910
90911
90912
90913
90914
90915
90916
90917
90918
90919
90920
90921
90922
90923
90924
90925
90927
28
90928
29
90929
30
90930
31
32
33
90931
90932
90933
DESCRIPTION
STOCK CHASSIS
TOP COVER, STANDARD BARREL
TOP COVER, MEDIUM BARREL
TOP COVER, MEDIUM BARREL, ACCOMMODATING SEI
MOUNT
TOP COVER, STANDARD BARREL, ACCOMMODATING SEI
MOUNT
BUTT STOCK STRUTT ASSEMBLY
BUTT STOCK MAIN BODY ASSEMBLY*
ERGO GRIP
FORE-GRIP (KYDEX), SINGLE UNIT, BLACK OR TAN OR 2PIECE UNIT
CHEEK REST
ELEVATOR-CHEEK REST SUPPORT
RECOIL PAD (PACHMAYR)
BUTT PLATE INTERMEDIATE SPACER
ELEVATOR CHEEK REST LOCK WRENCH
CHASSIS SLING ATTACHMENT PLATE
CHASSIS OPERATING ROD GUIDE
BOTTOM RAIL
LEFT SIDE RAIL
RIGHT SIDE RAIL
STOCK LOCK BAR RETURN SPRING
PISTOL GRIP MOUNTING SCREW
PISTOL GRIP MOUNTING SCREW LOCK WASHER
PISTOL GRIP MOUNTING SCREW FLAT WASHER
CHEEK REST MOUNTING SCREW (2 EACH)
RECOIL PAD MOUNTING SCREW
ELEVATOR LOCK SCREW
ELEVATOR LOCK NUT
BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW
BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW
FLAT WASHER
BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW
BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW
FLAT WASHER
OPERATING ROD GUIDE SCREW (3 EA)
TOP COVER ATTACHMENT SCREWS
BOTTOM RAIL ATTACHMENT SCREW (4 EA)
SCHM
34
35
36
37
38
39
40
PART #
90934
90935
90936
90937
90938
90939
90940
26
90926
41
90941
42
90942
43
90943
44
90944
45
90945
46
47
48
49
90946
90947
90948
90949
50
90950
54
90954
55
90955
56
90958
DESCRIPTION
SIDE RAIL ATTACHMENT SCREW (2 EA)
FRONT SLING ATTACHMENT
FRONT SLING ATTACHMENT BACK PLATE
FRONT SLING ATTACHMENT SCREW (2 EA)
BARREL TENSION SCREW
BARREL TENSION LOCK SCREW
FORE-GRIP (KYDEX) ATTACHMENT SCREW
FORE-GRIP (KYDEX) ATTACHMENT SCREW
FOR 2- PIECE UNIT
BUTT STOCK BUTT PLATE WELDMENT
ASSEMBLY
BUTT STOCK STRUTT ROD (2 EA)
BUTT STOCK STRUTT MOUNTING, BUTT
STOCK STRUTT STOP SCREW (6 EA)
BUTT STOCK SLING ATTACHMENT WIRE
COLLAPSIBLE BUTT STOCK MAIN BODY
WELDMENT
LOCK BAR
LOCK BAR ACTUATING BOLT
LOCK BAR THUMB RELEASE LEVER
LOCK BAR RETURN SPRING RETAINING CUP
LOCK BAR THUMB RELEASE LEVER TENSION
SPRING
ELEVATOR CHEEK REST SUPPORT
ELEVATOR CHEEK REST PLUNGER STOP
SCREW
CRUSH WASHER, SPACER FRONT BAND
SCHM
1
2
87
M14ALCS ENHANCED BATTLE RIFLE
Current production replacement parts for the M14ALCS
EBR are available. Please use the schematic above to
locate replacement part number.
Please Note: Not all SAGE International, Ltd. products
are available in all areas of the United States and
Canada.
989.739.7000
[email protected]

ENHANCED BATTLE RIFLE - Sage International, Ltd.

Transcription

Similar documents

the extra mile. - Jetco Delivery

SCI-Central Washington Chapter Rifle Raffle

PDF - Mullin Automotive Museum

Zenith Transoceanic H500

Converting a Slot.it Ferrari F40 to run on a SCX

Learn more about Web SO

25L15 Owner`s Manual

BusCon 2012 EXHIBITORS

celebrating malaysia`s 3rd annual INTERNATIONAL kustom

I load a good couple of calibres, and do a considerable amount of