Canadian Well Construction Journal

The Official Publication of the Canadian Association of Drilling Engineers
Canadian Well Construction Journal
Volume 2 | Issue 4
April 2010
10 s afet y feature
Worker injured while servicing
coiled reel drive chain and
rotating joint
8
co nference news
Annual drilling conference
program set
6
Association Information
‘Proven people, performance and products’
Newpark Drilling Fluids is not just another mud company.
We continue to provide the correct solution for the correct
challenge. Our fluid systems and engineering approach
will ensure shale is stabilized, pays zones are protected
and your budgets are maintained. You have a question,
ask. Honesty, integrity and service are goals we strive
for. Technology is the backbone of our strategy. Drilling
challenging shale gas reservoirs with water based fluids
is a recent success we are proud to speak about. Our goal
of minimizing your risk is something we take seriously.
For further information please contact your Newpark
Drilling Fluids representative or visit www.newpark.ca.
PowerDrive Xceed
*Mark of Schlumberger.
© 2010 Schlumberger.
10-DR-0008
RotaRy steeRable system
Precise Drilling Control in the Horn River basin
Stone Mountain Resources saved drilling time and cost by maximizing ROP using the PowerDrive Xceed*
rotary steerable system. Despite the complex shale gas reservoir, the service provided precise directional
control of azimuth and TVD to maximize reservoir exposure.
403-509-4000
www.slb.com/Xceed
Canadian Association Of Drilling Engineers
3
April 2010
Table of Contents
Feature Stories
Worker injured while servicing
coiled reel drive chain and
rotating joint
10
Departments
President’s Message
Member Profile: Kyle Klam
5
Association News
6
Upcoming Events 6
Conference News
8
Stats At A Glance
14
Canadian Association of
Drilling Engineers (CADE)
800, 540-5 Ave. SW, Calgary, Alberta T2P 0M2
Hello everyone. I trust the first quarter of 2010 was a welcomed shift from the first
quarter of 2009. Many people have been working hard and surely welcome a longneeded break from a productive winter drilling and completions season.
It has been an exciting winter for CADE. We have continued forward planning
for the annual spring conference. Doug Hollies and a great group of volunteers have
trudged forward and have laid the groundwork for another great conference. The 2010
conference, titled “Innovative Solutions for Unconventional Challenges,” will take
place at the Calgary Telus Convention Centre on May 26, 2010. We recently launched
our new website for the conference, which can be found through www.cade.ca or
directly at www.drillingconference.ca. Attendee registration is currently being accepted
via the newly developed, secure online system.
CADE has initiated its first-ever education program. This year it will be associated
with and follow the CADE conference. Details of the two-day seminar/workshop will
be available shortly. Please watch the CADE website for further details and registration.
CADE is an organization built on networking and sharing of people, ideas, and stories. I cannot emphasize enough throughout the year that we need you and your experience. Every winter, drilling and completions season has its set of disappointments
and victories. It is these stories I encourage you to share with your fellow colleagues
through CADE. If you have an interest in doing this, please contact anyone at CADE
and we will be sure to facilitate your efforts. We have accepted over 30 abstracts for the
conference, which is outstanding, and I applaud your contribution to your industry.
Finally, I would like to express my gratitude to our sponsors. You have provided
needed financial support when it hasn’t been easy. We sincerely appreciate your support and vision in keeping our organization running.
Patrick Murphy, P.Eng.
President, Canadian Association of Drilling Engineers
Phone: 403 264-4311 | Fax: 403 263-3796
www.cade.ca
Managing Editors: Todd Brown, Mike MacKinnon
CWCJ Photographer: Mike MacKinnon
Advertising Sales: Nick Drinkwater
Published by: JuneWarren-Nickle’s Energy Group
CADE’s mandate is to provide high-quality technical meetings to promote awareness of the drilling
& well servicing industry. Through CADE, members
and the public can learn about the technical challenges and experience gained from our speakers,
who are most often CADE members themselves.
We invite you to join CADE and further your professional development.
Past issues of CADENews are available online.
Current issues of Canadian Well Construction Journal are available via email, to CADE members only.
CADE is not responsible for any opinion or statement
expressed in this publication.
Offering Exceptional Drilling Fluids
& Environmental Solutions
Q’Max Solutions has the most fully equipped drilling fluids lab in Canada, which includes a state of the art Fann iX77 HTHP rheometer, one of four in
the world. We offer fluids and waste management solutions from start to finish.
Environmental Solutions: Offering extensive services ranging from pre-site assessments to drilling waste disposal, site reclamation and remediation.
CBMax™: Proprietary fluid system specifically designed for all CBM drilling operations that is effective in both vertical and horizontal applications.
PolyTar™: Patented and proven system developed for SAGD applications providing superior anti-accretion properties and reduced disposal costs.
Smart Seal™: Superior seepage loss control for oil based drilling fluids that allows for high ROP.
We take what we know to the MAX!
Contact us today to learn more.
HEAD OFFICE
Calgary, Alberta Canada
T 403.269.2242 F 403.269.2251 W www.qmaxsolutions.com
Canada • USA • Colombia • Ecuador • Peru • Mexico • India
BENCHMARKING • DRILLING RESEARCH • WELL PLANNING
LEARN FROM HISTORICAL
DRILLING TO OPTIMIZE YOUR
PERFORMANCE!
RESEARCH OFFSET WELLS
USING XI’S DIGITIZED
TOUR DATA.
XI's digitized data is accessible within minutes
and allows endless research capabilities.
- Examine your surrounding wells.
- Know about past problems to avoid
similar issues.
- Benchmark your drilling performance.
Contact XI Sales:
[email protected]
p 403.517.0120
Visit our Website:
Canadian Association Of Drilling Engineers
April 2010
5
MEMBER PROFILE
Kyle Klam
SAIT Student/SAIT-CADE Liaison
Tell us about the Petroleum Technology program at SAIT.
It’s an excellent program that condenses practical engineering theory
into a two-year course. It focuses on reservoir, drilling, production, and
geological engineering. It is producing many high-quality graduates,
many of whom have their resumés online. If anyone would like to consider a SAIT grad for one of their positions, I have a collection of student’s
resumés for them to browse through.
Why did you choose Petroleum Technology?
I started as a roughneck, and thanks to good luck and hard work, I
found myself moving up the ladder very quickly. I got to the point
in my career where I realized that all that was left for me to do was
to sit on the rigs until I turned 50. I decided that I needed to set
myself apart from the crowd and I felt an education was the best
way to do that.
Describe your background and interests.
I come from the small town of Lacombe, Alberta (outside of Red Deer).
Currently I am consulting on the service side of the industry running
completion tools. I hope to travel the world with my family once we are
a little more established. I have done a bit of backpacking and almost
have my first passport filled.
What are your career aspirations?
In the short term, I am going to be looking to do wellsite supervision. I
am also trying to grow my oilfield rentals company. I’m hoping to use it
as a savings account so maybe I could buy a well or two when I’m older.
Eventually I would like to run a completions department or partner into
an engineering company.
Why did you decide to become the SAIT-CADE liaison?
It gives me a chance to help people. I get to meet and get to know a
lot of great students at SAIT. When I go downtown I get to meet CADE
members. I’m just hoping to talk to CADE members and facilitate them
meeting the right graduate. We have a ton of talent at SAIT, but not
everyone knows how to meet the right people. If I can help make that
happen then I’m happy.
What do you like to do when you are not working or
studying?
Email: [email protected]
Student resumés: www.linkedin.com
Photo: Mike MacKinnon
Well I’m working full-time in the field and going to school. I also spend a
lot of time with my son, so between those three there isn’t much time for
other things. My other interest would definitely be snowboarding.
6
Canadian Well Construction Journal
April 2010
Association/Membership News
Welcome New Members
NAME
COMPANY
TELEPHONE
EMAIL
Pedro Aleman
Travis Bouchard
Sean Doucette
John Garden
Michael John Geiger
Melanie Goorman
Shannon Bowen – Kelsick
Charles Leniczek
Doug McLean
Jay McNeil
San Pandey
Greg Shpytkovsky
Aditya Singh
Robert Yarmuch
Rocky Zhang
Shell Canada Energy
West Energy Ltd.
Trinidad Drilling Ltd.
Deadeye Engineering Inc.
Shell Canada Energy
403-691-3111
403-716-2254
403-802-3430
403-265-4973
403-691-3111
Monday Marketing Tools
Chuck Leniczek Oilfield Consulting
Husky Energy Inc.
Trinidad Drilling Ltd.
San Pandey Consultants & Services Ltd.
West Rock Energy Consultants Ltd.
403-992-4142
306-335-2210
403-298-6111
403-294-4441
403-260-1195
403-663-8358
Pacesetter
Mount and River International Ltd.
403-984-5110
514-685-8532
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
greg.westrock-energy.com
[email protected]
[email protected]
[email protected]
Members On The Move
NAME
COMPANY
TELEPHONE
EMAIL
TAQA North Ltd.
403-272-5714
403-724-5386
[email protected]
[email protected]
NAME
COMPANY
TELEPHONE
EMAIL
Dale Gies
Phil Johnson
Gabe Kobel
Doug Long
Stephen Raaflaub
Jeff Thomson
The Barlon Engineering Group Ltd
The Barlon Engineering Group Ltd.
The Barlon Engineering Group Ltd.
The Barlon Engineering Group Ltd.
The Barlon Engineering Group Ltd.
The Barlon Engineering Group Ltd.
403-261-7097
403-261-7097
403-261-7097
403-261-7097
403-261-7097
403-261-7097
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Alejandro Sarmiento
Tammy Todd
Directory Correction
Upcoming Events
CADE Technical Luncheon
Wednesday, April 14, 2010
The Westin Calgary
CADE
Executive Team
2009/2010
CADE Technical Luncheon
Wednesday, May 12, 2010
The Westin Calgary
CADE Technical Luncheon
Wednesday, June 16, 2010
The Westin Calgary
TITLE
NAME
TELEPHONE
President
Past President
Vice-President
Secretary
Treasurer
Membership Chairman
Education Chairman
Social Chairman
CWCJ Editor
Technical Chairman
IT Chairman
Drilling Conference Liaison
Executive Member
CAODC Liaison
Patrick Murphy
David White
John Garden
Tammy Todd
Alice Skoda
Jason Tiefenbach
Mike Buker
Dan Schlosser
Todd Brown
Jeff Arvidson
Ryan Schoenhals
Doug Hollies
403-266-7383
403-699-5160
403-441-2300
403 613-8844
403-232-6066
403-543-8012
403-213-3615
403-531-5284
403-230-3055
403-232-7100
403-767-0202
403-604-6645
VACANT
John Pahl
403-292-7966
Canadian Association Of Drilling Engineers
April 2010
Association/Membership News
Editor’s Note
Welcome to the third-last issue of Canadian Well Construction Journal under our 2010 executive. It’s been a dramatic year of change for CADE,
and the executive committee has done a great job this year developing value for the membership.
Under Patrick Murphy’s watch, we have launched our first full year of the new look of the Canadian Well Construction Journal, and we have
redesigned the website with great results so far. Kudos to our forward-thinking leaders from the last several years.
We have been trying to publish stories that you’ve been asking for. There was a concern that we weren’t spending enough time on safety.
So this year we’ve run a safety story almost every month and presented a moving luncheon on the ramifications of accidents in the field. If you
have any issues you’d like to see, please email me and we will do our best to cover the story.
This is the last issue before the CADE/CAODC Conference, and we are featuring more information inside. We appreciate your continued support and look forward to seeing you at the conference.
Todd Brown, CADE News Editor
[email protected] | cell: (403) 969–8148
Upcoming CADE Luncheon
Date
Wednesday, April 14, 2010
Place
The Westin Calgary
Time
11:30 a.m.—Reception
12:00 noon—Luncheon
12:30 p.m.—Presentation
Speaker
Robin Weseen,
Summit Liability Solutions
Abstract: Calcium humate reduces disposal costs by lowering electrical conductivity and sodium
absorption ratio in potassium silicate-based drilling waste
The salinity of drilling waste plays a pivotal role in selecting the waste management method and
subsequent cost for waste disposal. Endpoints for salinity have been set by Alberta Environment and
adopted by the Energy Resources Conservation Board in Directive 50: Drilling Waste Management.
Disposal methods are subsequently determined by the initial soil and final soil/waste salinity endpoints as measured by increases in:
• electrical conductivity (EC)
• sodium absorption ratio (SAR)
• sodium content
A major factor in the salinity of the drill waste is the choice of drilling fluid additives. The challenge for
advanced gel chem systems is the need to provide adequate shale inhibition without producing drilling
waste with excessively high salinity values. Potassium silicate has proven to be a highly effective shale
inhibitor with a lower EC versus other commonly used potassium additives. However, SAR values for potassium silicate drill waste are high as a result of the silicate precipitating calcium and magnesium. Historically,
SAR has been lowered by the use of gypsum and/or epsom salts. The decrease in SAR comes at the expense
of higher EC values.
This paper reviews the technical collaboration between suppliers, service companies, and operators that
led to the development of humic substances as a superior waste amendment. The chemistry of certain humic substances allows this negatively charged macromolecule to absorb and release metal cations. Calcium
humate has been shown to improve the salinity characteristics of water-based drilling waste and more
specifically, potassium silicate–based drilling waste. Amendment testing was done on a wide variety of drill
waste samples obtained from leases across Alberta. Final testing and field trial work focused on drill waste
and subsoil obtained from leases near Claresholm, Alberta.
Potassium silicate drill waste amended with calcium humate showed sharp drops in SAR and EC. A mixture of three parts subsoil to one part drill waste showed a decrease of up to 15 per cent for EC and 30 per
cent for SAR. The addition of a small percentage of calcium humate resulted in drill waste that would qualify
for land spreading or require a lower ratio for mix-bury-cover.
Bio: Robin was raised in Tisdale, Saskatchewan and attended the University of Saskatchewan. He is an Alberta and British Columbia registered
professional agrologist and co-owner of Summit Liability Solutions, an environmental service and consulting firm operating here in western
Canada. Robin holds bachelor degrees in agriculture (environmental science) and education (biology, English). His primary role at Summit as the
vice-president of reclamation and remediation services has Robin very busy managing a group of nearly 50 people and associated projects out
of their Calgary office. Robin has presented multiple educational workshops on the reclamation process and related topics at Enform to students
and workers in our industry. Robin has significant history and experience with Drilling Waste Management with over 10 years of experience in
the industry. His career path has taken him to all parts of western Canada and overseas for a brief assignment in Yemen.
7
8
Canadian Well Construction Journal
April 2010
Conference News
Annual Drilling Conference
Program Set
by Aimée Barnabé
The abstracts are in and the selection process is now complete for the 2010 CADE/CAODC
Drilling Conference. An impressive number and variety of exceptional presentations were
put forward for consideration this year. The depth of submissions has allowed the technical committee to proceed with the plan to run concurrent sessions for the first time
since the inception of the event. Technical committee co-chair Mark Scholz explained,
“More authors and presentations have a forum, and delegates will now be able to
choose which specific session appeals to them. This is an exciting step forward in the
development of the conference.”
Scholz released the list of session themes on the slate for the event:
➤ Risk management, planning, and safety
➤ Managed pressure drilling
➤ Completions
➤ Directional drilling
In addition to the announcement of the lineup of the segments of technical presentations, the keynote speaker for the luncheon portion of the event has been confirmed:
Peter Tertzakian, chief energy economist and managing director of ARC Financial, will speak
at the event. Tertzakian is an energy expert, columnist, and book author. His two books, A
Thousand Barrels a Second and The End of Energy Obesity, both examine the transformation of
the global energy sector through economic, environmental, and geopolitical pressures. His rise
from the trenches of hands-on oil exploration fieldwork to become an internationally recognized,
top-ranked oil expert in energy matters has been attributed to his background in geophysics,
economics, and finance, as well as his entrepreneurial spirit.
Committee member Jason Tiefenbach was thrilled to finalize Tertzakian’s appearance at the
luncheon.
“Giving delegates the opportunity to gain insight from an expert like Peter Tertzakian really enhances our program. Our audience wants to know what the economic, environmental, and financial future looks like for our industry.”
April 2010
Photos: Mike MacKinnon
Canadian Association Of Drilling Engineers
The CADE/CAODC Drilling Conference, now held annually, will take place on May
26 at the Telus Convention Centre located in downtown Calgary. The occasion brings
together a unique mix of engineers, operators, contractors, and technical representatives to share innovations, new techniques, best practices, and the latest solutions.
For more information on this year’s conference or to register online, visit
www.drillingconference.ca.
Keith Sanford of Weatherford Canada
addresses the 2009 drilling conference.
Technology
Service
Performance
Reliability
9
10 April 2010
Canadian Well Construction Journal
SAFET Y FEATURE
Safety Alert (#04–2010 )
Worker injured while servicing coiled reel drive chain
and rotating joint
Function: Coiled Tubing Servicing
Incident Type: Injury Incident
Release Date: March 22, 2010
Location: Canada, Northern Alberta
Summary
A worker was injured while lubricating a coiled tubing reel drive chain that was in motion.
Description of Incident
While performing a coiled tubing cleanout on a well, a worker was injured as he was lubricating the coiled reel drive chain. The worker stood
beside the moving reel and sprayed chain lubricant onto the chain. The can of lubricant began to lose pressure, so the worker moved closer to
the drive chain. A spoke on the reel caught the workers arm, which was pulled into the support pedestal and resulted in a severe laceration to
his forearm.
Recommendations for Preventing Future Incidents:
Preventive maintenance must not be performed on any moving equipment. When maintenance is required during a well servicing operation,
the coiled tubing reel and rotating joint must be stopped and secured from any unintentional movement. During maintenance operations,
communication needs to be maintained between the equipment operator and maintenance worker to ensure all personnel are clear of the
hazardous area before the operator reactivates the equipment.
Recommended Equipment Modifications (Engineering Controls)
Companies may wish to consider installing remote or automatic lubricating devices on the coiled tubing reel drive chain to prevent unintentional access to moving equipment.
Other Recommendations (Other Controls)
➤C
ompanies
may wish to install a barrier around the coiled tubing reel to limit or prevent unintentional access to the area near the
rotating equipment.
➤ All coiled tubing companies should review their procedures for equipment servicing during coiled reel drive chain and rotating joint servicing operations, and revise as needed.
➤ Coiled tubing companies may wish to place warning signs to indicate to new workers, other workers, or visitors that rotating equipment
hazards are present.
➤ Companies may wish to use an approved reflective tape or reflective paint to help workers identify when the reel is in motion.
Other Information:
This alert has been reviewed by the Intervention & Coiled Tubing Association and will be forwarded to the IRP 21 Coiled Tubing Operations
working committee.
Contact: Enform | 1538 – 25 Avenue NE | Calgary, Alberta, Canada T2E 8Y3 | E: [email protected] | T: (403) 250-9606 | www.enform.ca
Canadian Association Of Drilling Engineers
April 2010
DISCLAIMER: This Safety Alert is designed to prevent similar incidents by communicating the information at the earliest possible opportunity. The information may change accordingly over time. It may be necessary to obtain updates from the source before
relying upon the accuracy of the information contained herein. This material is presented for information purposes only. Managers and supervisors should evaluate this information to determine if it can be applied to their own situations and practices.
11
12 April 2010
Canadian Well Construction Journal
Thank You To Our Sponsors
GOLD
SILVER
Sponsorship Opportunities
The CADE sponsorship package offers a cost-effective way to inform
the key decision makers of our member companies about your
products and services. Stay visible and competitive by making a CADE
sponsorship part of your overall marketing strategy.
In addition to advertising placements, sponsors receive:
• Coverage at each technical luncheon in print and PowerPoint slides
• Visibility on the CADE website
• Recognition on the dedicated Sponsor Page in each issue of the journal
Contact Nick Drinkwater today to arrange for your sponsorship advantage. Email: [email protected] or phone 403-516-3484.
PROVIDING YOU WITH QUALITY RESOURCE
MANAGEMENT FOR ALL YOUR LEASE
CONSTRUCTION, DRILLING, COMPLETION,
AND ABANDONMENT NEEDS.
• Extensive Management Team Experience
• Project Management
& Engineering Services
• Horizontal Drilling
(Montney, Bakken, Wab., Viking, Cardium)
• Multi-Stage Fracturing
Our Experience.
Your Advantage.
Calgary, AB
(403) 262-8595
www.tstar.ca
GlObal REaCH • lOCal FOCUS
WHY ENSIGN?
• Diverse operations worldwide
• Commitment to safety and customer service
• Committed to operational excellence
Services available from Ensign include:
•AutomatedDrillRigs(ADR™)
•ConventionalDrillingRigs
•DirectionalDrillingServices
•WellServicingRigs
•UnderbalancedDrillingUnits
•CampServices
•BraidedandSlicklineWirelineUnits •OilfieldEquipmentRentals
•ProductionTestingUnits
•ManufacturingofOilfield
•CoringRigs
ProductionEquipment
For further information contact:
Corporate Head Office
ENSIGN ENERGY SERVICES INC.
Suite 1000, 400 – 5th Avenue S.W.
Calgary, AB Canada T2P 0L6
Tel: (403) 262-1361 Fax: (403) 262-8215
[email protected]
www.ensignenergy.com
“Performance Excellence – Second to None”
14 April 2010
Canadian Well Construction Journal
Stats At A Glance
Active Drilling Rigs February 23, 2010
94
123
24%
BC
59
51
110
54%
MB
2
13
15
13%
26%
207
592
799
Northwest Territories
-
2
2
0%
Northern Canada Total
2
2
4
50%
Ontario
-
1
1
0%
Quebec
-
3
3
0%
New Brunswick
1
2
3
33%
Nova Scotia
1
-
1
100%
Newfoundland
1
-
1
100%
Eastern Canada Total
3
6
9
33%
210
600
810
26%
155
35%
6
42
86%
AB7
48
89
137
35%
Alberta Total
328
350
678
48%
SK1
37
18
55
67%
SK2
13
23
36
36%
SK3
37
49
86
43%
Saskatchewan Total
87
90
177
49%
2
1
3
67%
BC1
8
14
32
56%
20
15
35
57%
4
8
12
33%
439
463
902
49%
Northwest Territories
0
0
0
0%
Northern Canada Total
0
0
0
0%
Quebec
0
2
2
0%
Eastern Canada Total
0
2
2
0%
439
465
904
49%
BC2
British Columbia Total
Manitoba
Western Canada Total
Canada Total
2008
2009
Dec
101
36
2010
Western Canada Service Rigs March 29, 2010
800
600
400
200
0
2008
2009
Dec
54
AB6
Nov
AB5
Nov
53%
Oct
144
Oct
68
Sep
76
Aug
AB4
Jul
63%
Jun
53%
104
May
89
38
Apr
42
66
Sep
0
47
AB3
Aug
200
6
Jul
14%
1
AB2
Jun
7
AB1
May
400
Apr
% ACTIVE
Mar
TOTAL
Mar
DOWN
600
Feb
ACTIVE
2010
800
Service Rig Activity March 29, 2010
PSAC Zone
2009
Western Canada Drilling Rigs March 29, 2010
Feb
Canada Total
2008
Jan
Western Canada Total
400
200
0
Dec
29
Nov
SK
1,000
800
600
Oct
21%
Sep
551
Aug
434
Jul
117
Jun
AB
May
% ACTIVE
Apr
TOTAL
Mar
DOWN
Feb
ACTIVE
Jan
PSAC Zone
Jan
Drilling Rig Activity March 29, 2010
2010
Journal Content
Information in this publication may be sourced through a variety of contributors. Members are encouraged to email their suggestions regarding
articles, general content, and statistical graphs and charts to: Dale Lunan at [email protected]
D R I L L I N G
S O L U T I O N S
All from one
The field-proven, one-drum MEGADRIL* system improves ROP
and boosts drilling efficiency in wells that utilize diesel or
mineral oils as the base fluid.
With no need to mix separate emulsifier and wetting agent, our
one-drum formula saves you time and reduces the potential for
error. The MEGADRIL system helps avoid elevated gel strengths;
has greater tolerance to drill solids, high water content and
contaminants; reduces dilution requirements and base-oil
consumption; is thermally
stable; and gives you
everything you need for
optimal drilling performance:
all from a single source.
www.miswaco.com
Drilling
Solutions
Wellbore
Productivity
Production
Technologies
Environmental
Solutions
*Mark of M-I L.L.C
9982.2 Megadril Ad AW_CADE.indd 1
28/4/09 16:21:04
Profit from experience.
SM
Slimmer well profile. Fatter well profits.
A Slim Well profile can reduce your overall well costs and days-to-depth,
while maintaining the original completion size. It also:
•Increasesrateofpenetration
•Bringsresourcesonlinefaster
•Decreasesenvironmentalimpact
•Reducesconsumables
Conventional
SET ® System
374.65mm surface hole
444.50mm surface
339.73mm casing
shoe, drill out
with 311.15mm bit
273.05mm drill out
with 250.83mm bit
OneoperatorimplementingaSlimWelldesignsaved20%ofthetotal
wellcosts.Furthersavingsof$300,000USDwererealizedbyeliminating
underreaming and cementing.
Visit www.EnventureGT.com or call 281.552.2200fordetailedtestingresults,
technical data—or to schedule a meeting and find out how much you can save.
244.48mm casing
shoe, drill out
with 215.90mm bit
193.68mm casing
shoe, drill out
with 168.28mm bit
www.EnventureGT.com
114.30mm
‘Enventure’and‘SET’aretrademarksofEnventureGlobalTechnology
193.68mm drill out
with 171.45mm bit
152.40mm x 193.68mm
SET System with swellable
elastomers drill out
with 149.23mm bit
114.30mm
Registration
CADE ■ CAODC DRILLING CONFERENCE
Innovative Solutions for Unconventional Challenges
May 26, 2010
Telus Convention Centre
Name ____________________________________________________
Job Title __________________________________________________
Company _________________________________________________
Address __________________________________________________
City _____________Province ___________ Postal Code ____________
Telephone ____________________ Fax_________________________
E-mail ____________________________________________________
Please check all that apply:
CADE Member
CAODC Member
Author/Co-Author
Student
Non-Member
Conference Registration Fee (Please check one):
Early-Bird Registration (Received on or before 4pm May 3, 2010)
Member $265.00
______________
Non-Member $315.00
______________
Regular Registration (Received after May 3, 2010)
Member $325.00
______________
Non-Member $375.00
______________
Student Member (ID Required) $50.00
______________
Keynote Luncheon (Location — Calgary Telus Convention Centre)
Individual Tickets @ $80.00
______________
Reserved Table(s) of 8 @ $640.00
______________
If reserved, table name to be: __________________
Subtotal $ ______________
Add 5% GST (#R123175036) $ ______________
Total $ ______________
Method of Payment
Visa or MasterCard
Cheque (payable to: CADE CAODC Drilling Conference)
Credit Card # ____________________________ Exp. Date _________
Full Name on Card __________________________________________
Signature _________________________________________________
• Seating is limited; avoid disappointment and register early. Registrations will not be
• No cancellations allowed; substitutions – as detailed below – may be requested.
• Substitutions (change of registered delegates) received in writing by May 15, 2010
will be made at no charge.
• Substitutions received in writing on or after May 16, 2010 will incur a fee of $25.00
plus GST.
• Audio recordings, videotaping and photography are not permitted.
A short course on extended reach drilling will be available after the conference.
Visit www.drillingconference.ca for updates!
Information: www.drillingconference.ca or phone (403) 264-4311
Submit completed registration forms with full payment via
email: [email protected] or fax: (403) 263-3796
Courier:
800, 540-5 Avenue SW, Calgary, AB T2P 0M2