Full Product Catalogue

Transcription

155 New Huntington Road,
Vaughan, ON L4H 3R6
Tel: (905) 265-0999
Ca
stl
em
ore
Rd
Qu
ee
nS
tE
Pk
wy
E
Wi
llia
ms
Rd
Dr
ay
rew
Go
t
or
rp
Ai
Al
W
Albion
Rd
Ave
Finch
W
Alb
ion
Rd
ve
ton A
Isling
Ste
ele
sA
ve
E
t
or
rp
Ai
REXDALE
Rexd
ale B
lvd
Rd
d
ry R
Der
De
rry
Rd
E
Pk
wy
E
Av
e
ve
ng A
Kipli
ch
Fin
on
pt
am
Br
Rd
d
aR
ale
am
Br
Qu
ee
nS
t. E
b i o Rd
n
Wild
Water
Kingdom
CN
ram
rb
To
Wi
llia
ms
e
es Av
Steel
427
407
407
27
50
ETR
ETR
W
s Ave
Steele
Glenview
Memorial
Gardens
er
mb
Hu
Bo
vai
rd
D
57
7
7
7
Dr
Rd
7
BRAMPTON
we
st P
kwy
y
Pine Valle
WOODBRIDGE
27
lvd
Zenway B
107
BRAMALEA
Ave
Kipling
Dr
n
tingto
New Hun
d
eR
or
eG
Th
an
Ve
Mc
8
Dr
ay
rew
Go
r. E
d
staff R
Lang
d
eR
or
eG
Th
Ca
stl
em
ore
Rd
Fax: (905) 265-9993
E
427
Goreway
Dr
Mon - Fri: 6:30am - 5:00pm Saturday: 7:00am - 1:00pm
27
BUYERS GUIDE
Tel: (905) 265-0999
Fax: (905) 265-9993
WHY SHOP AT METALWORKS?
Express Pick-up Service
1 Stop Shop - if we don’t have it we’ll bring it in
Competitive Prices
Rush Custom Metal Service
Delivery Service
Customer service is our satisfaction.
Contact our knowledgeable Staff:
Counter Sales
Clayton Chantler - [email protected]
Kevin Ho - [email protected]
Anthony Gurman - [email protected]
Inside Sales
Kevin Hurst - [email protected]
Romy Viray - [email protected]
George Broomer - [email protected]
Mike Jones - [email protected]
Purchasing
Shah Haveliwalla - [email protected]
Marc Marchese - [email protected]
Accounting
Accounts Receivable - [email protected]
Accounts Payable - [email protected]
Operations Manager
Raquel Fernandes - [email protected]
Vaughan, ON L4H 3R6
Tel: (905) 265-0999
Fax: (905) 265-9993
PRIME METAL
& SKILLED/CERTIFIED SHEET METAL MECHANICS
With impressive lead times and Rush Service - Our Custom Sheet Metal
Manufacturing provides a variety of products and services:
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Duct line uses 48” wide coil 28 Ga.. - 20 Ga.
30 Ga. - 20 Ga. duct and fittings locked together, Pittsburgh lock or snap lock
18 Ga. and heavier duct and fittings are welded together, mig weld or tig weld available
Make duct and fittings from galvanized, satin coat, stainless steel, aluminum.
18 Ga. is the lightest we can weld
5” dia. elbows is the smallest diameter we can make.
For custom round fittings, 26 Ga. is the lightest we can make
Tdf flange can only be turned on material 20 Ga. or lighter, anything heavier has to be
ductmate frames
Custom round pipe will be rolled, spot welded and sealed.
Spiral pipe can be made from 28 Ga. to 20 Ga., galvanized.
10 Ga. metal is the heaviest we can work with.
Can manufacture 3” - 50”spiral pipe
Vanstone flanges up to 18 Ga.
Can solder drain pans along with nipple.
Can insulate duct and fittings with 1/2”, 1”, 1-1/2” and 2” both soft and rigid insulation.
Can manufacture gore lock elbows up to 50” dia.
HEATING
ROOFTOP UNITS
Gas Furnaces
1-2
3 - 6 Ton
25
Electric Furnaces
3
3 - 12.5 Ton
25
Direct Vent Furnaces
4
15 - 25 Ton
25
Electric Duct Heaters
/ Mini Make Up Air
5
Make-Up Air
25
Unit Heaters
6-8
Infared Tube Heaters
/ Superior Radiant
9-10
COOLING
HYDRONICS
Hot Water Tanks
26-30
Raypak Pool Heaters
31
Storage Tanks
32
Air Conditioners
11-13
Pumps & Fittings
33
Heat Pumps / Room Air Units
14
Pex Pipe & Fittings
34-35
Ductless Split Units
15-16
Radiant Heating
36-38
FANS
AIR HANDLERS
Luxaire Air Handlers
17
Delhi Fans
39-41
ADP Air Handlers
18
Supply / Exhaust Fans
42-43
Airmax Air Handlers
19-20
Ventilation Fans
44-46
EVAPORATOR COILS
INDOOR AIR QUALITY
A-Coils
21
Sanuvox
47-48
Multi-Position
22/24
Filters
49
Fully Cased
22/24
Air Cleaners
50
Horizontal
23-24
HRV / ERV
51-54
Partial Cased
23-24
Humidifiers
55-56
De-Humidifiers
57
AIR DISTRIBUTION
ELECTRICAL EQUIPMENT
Grilles
58
Wire
88
Diffusers
59
Motors
88
Floor / Sidewall Grilles
60
Belimo Actuators
89-90
Exhaust / Intake
61
Accessories
91-92
Dampers / Louvers
62
TOOLS & EQUIPMENT
FIREPLACES / OUTDOOR
HEATERS / BBQ’S
Continental Fireplaces
63-64
Dimplex Fireplaces
65-66
Napoleon Outdoor Heaters
66
Napolean BBQ’S
67-68
TPI & TurboTorch
93
Milwaukee
94
YellowJacket
95
Reed
96
Malco
97
GAS PRODUCTS
Gastite
69
SAFETY SUPPLIES
Underground Gas Pipe
/ Accessories
70
Eye / Hand Protection
98
Gas Connectors
70
Head Protection
99
B-Vent
71
Fall Protection
99
Respiratory Protection
99
Traffic Safety
99
THERMOSTATS
White Rodgers
72-73
INSTALLATION ACCESSORIES
SHEET METAL
Black Pipe & Fittings
74
Pipe
100
PVC Pipe & Fittings
75-76
Elbows / Tee’s / Fittings
101-102
Copper Tubing & Fittings
77-78
Duct
102-103
Accessories
79-86
Belts / Pulleys / Bushings
87
GAS FURNACES
GUARDIAN, CLIMASURE, LX & ACCLIMATE SERIES
95% to 98% AFUE 33” GAS FIRED FURNACES
ALL MODELS
●●
●●
●●
●●
●●
●●
●●
●●
Compact 33” height and standard cabinet widths ideal for all applications.
Multi-position design - up flow, horizontal left or right or down-flow applications.
Full 400 CFM per ton airflow ratings @ .5” ESP.
Built-in, high level self-diagnostic controls with fault codes for reliable operation.
Low sound levels are ideal for new construction or replacement applications.
All models are propane convertible.
All models meet low NOx emission code requirements.
Venting applications as 2 pipe direct vent or single pipe vent with indoor combustion air.
WARRANTY:
10 Year Limited Parts Warranty (with Registration to original homeowner within
90 days of installation).
5 Year Limited Parts Warranty (non-registered).
Lifetime Limited Heat Exchanger Warranty for Subsequent home owners.
20 Year Limited Heat Exchanger Warranty for subsequent home owner.
10 Year Limited Heat Exchanger Warranty for commercial applications.
SINGLE STAGE MODELS - 95.5% AFUE
●●
●●
●●
●●
PSC Four-speed direct drive motor with large, quiet blower in “S” models.
Five-speed high efficiency brushless DC motor in “E” models for SEER Enhancement.
Reliable single-stage gas valve with single wire twinning available.
Insulated blower compartments for thermal and acoustic performance (“E” models only).
TG9S 95.5% AFUE MULTI-POSITION GAS FURNACE
SINGLE-STAGE GAS VALVE, PSC MOTOR (CLIMASURE) - STANDARD TIER
PART NUMBER
TG9S040A08MP11
TG9S060A10MP11
TG9S060B12MP11
TG9S080B12MP11
TG9S080C16MP11
TG9S080C22MP11
TG9S100C16MP11
TG9S100C20MP11
TG9S120D16MP11
TG9S120D20MP11
TG9S130D20MP11
BTU INPUT
40
60
60
80
80
80
100
100
120
120
130
AIRFLOW HEIGHT (in) WIDTH (in)
800
1000
1200
1200
1600
2200
1600
2000
1600
2000
2000
33
33
33
33
33
33
33
33
33
33
33
14 ½
14 ½
17 ½
17 ½
21
21
21
21
24 ½
24 ½
24 ½
DEPTH (in)
29 ½
29 ½
29 ½
29 ½
29 ½
29 ½
29 ½
29 ½
29 ½
29 ½
29 ½
TM9X 95% AFUE MULTI-POSITION GAS FURNACE
SINGLE-STAGE GAS VALVE, X13 ECM MOTOR (LX SERIES) - MID TIER
PART NUMBER
BTU INPUT AIRFLOW HEIGHT (in) WIDTH (in)
TM9E040A10MP11
TM9E060B12MP11
TM9E080B12MP11
TM9E080C16MP11
TM9E100C16MP11
TM9E100C20MP11
TM9E120D20MP11
40
60
80
80
100
100
120
1000
1200
1200
1600
1600
2000
2000
33
33
33
33
33
33
33
14 ½
17 ½
17 ½
21
21
21
21
DEPTH (in)
29.9
29.9
29.9
29.9
29.9
29.9
29.9
1
GAS FURNACES
TWO STAGE MODELS - 96% AFUE
●● Two stage heating operation includes 2 stage gas valve, 2 speed inducer, with
adjustable timer to allow two stage operation with single stage thermostat.
●● Insulated blower compartments for thermal and acoustic performance.
●● ECM variable speed motors used for quiet, efficient operation.
TM9V 96% AFUE MULTI-POSITION GAS FURNACE
TWO STAGE GAS VALVE, ECM VARIABLE SPEED MOTOR (LX SERIES) - MID TIER
PART NUMBER
BTU INPUT
AIRFLOW
HEIGHT (in)
WIDTH (in)
DEPTH (in)
TM9V040A10MP11
40
1000
33
14 ½
29.9
TM9V060B12MP11
60
1200
33
17 ½
29.9
TM9V080B12MP11
80
1200
33
17 ½
29.9
TM9V080C16MP11
80
1600
33
21
29.9
TM9V100C16MP11
100
1600
33
21
29.9
TM9V100C20MP11
100
2000
33
21
29.9
TM9V120D20MP11
120
2000
33
21
29.9
MODULATING MODELS - 97% to 98% AFUE
●● Industry’s first fully-modulating 97% up to 98% AFUE model
provides optimum comfort.
●● Operates to within 1/2 degree of the thermostat set point.
●● Modulates the gas valve, blower motor and inducer motor for
reliable operation in 100 stages.
●● Built-in, high level self-diagnostic controls with fault codes.
●● Low sound levels are ideal for new construction or replacement
applications.
●● 4 wire COMMUNICATIONS capable (-12C Series).
●● ECM variable speed drive for SEER enhancement, improved
comfort, optional airflow profiles, IAQ perf.
LP9C 97.5% to 98% AFUE MULTI-POSITION GAS FURNACE - COMMUNICATIONS CAPABLE
MODULATING GAS VALVE, ECM MOTOR (ACCLIMATE) - PREMIUM TIER
PART NUMBER
2
BTU INPUT
AIRFLOW
HEIGHT (in)
WIDTH (in)
DEPTH (in)
LP9C060B12MP12C
60
1200
33
17 ½
29.9
LP9C080B12MP12C
80
1200
33
17 ½
29.9
LP9C080C16MP12C
80
1600
33
21
29.9
LP9C100C16MP12C
100
1600
33
21
29.9
LP9C100C20MP12C
100
2000
33
21
29.9
LP9C120D20MP12C
120
2000
33
24 ½
29.9
ELECTRIC FURNACES
Clean, quiet and efficient furnaces provide electrically controlled
comfort throughout your home, cottage and mobile home. No
chimney is required so 100% of the heat produced stays inside the
building. No complex controls to attach. Just connect the power
and thermostat wires.
●●
●●
●●
●●
Produces no soot or smoke.
For complete comfort, add air conditioning, power humidifier or electronic air cleaner as desired.
The only moving part, the blower, is specially mounted and balanced for optimal quiet operation.
CSA approved for use in mobile homes.
ECM Series
The ECM Series takes the D Series one step further by offering the superior performance of
electronically commutated motors (ECM) resulting in an improved operating efficiency and
lower overall energy costs. May be installed for vertical, horizontal or downflow operation.
PART
NUMBER
KW
ELECTRICAL
HP
BTU/HR
WEIGHT
(lbs)
21ECM10
10
3 Speeds, 240V, 1 Phase
1/3
34,152
-
21ECM15
15
1/3
51,228
108
21ECM18
18
1/3
61,473
110
21ECM20
20
1/3
68,304
110
21ECM23
22.5
1/3
76,842
115
D Series
D-Series use multi·speed PSC motors permanently lubricated, rubber mounted and precision
balanced. May be installed for vertical, horizontal or downflow operation.
PART
NUMBER
KW
ELECTRICAL
HP
BTU/HR
WEIGHT
(lbs)
21D10
10
1/3
34,152
107
21D15
15
1/3
51,228
108
21D18
18
1/3
61,473
110
21D20
20
1/3
68,304
110
21D23
22.5
1/3
76,842
115
21D25
25
1/3
85,379
115
21D27
27
3/4
92,210
115
B Series
The B Series electric furnaces are clean, efficient and quiet. They can be installed almost
anywhere, in a basement closet, crawl space or any unused space. The B Series models use
traditional sequencers to control the heating elements.
PART
NUMBER
KW
ELECTRICAL
HP
BTU/HR
WEIGHT
(lbs)
21B10M
10
1/3
34,120
107
21B15M
15
1/3
51,180
108
21B18M
18
1/3
51,416
110
21B20M
20
1/3
68,240
110
21B25M
25
1/3
85,300
115
21B27MS
27
1/3
92,124
115
83B13
13
1/3
46,062
105
83B24
24
1/3
81,880
115
83B27
27
1/3
92,124
120
3
DIRECT VENT FURNACES
●● Mounts easily on any outside wall and occupies a minimum of
●●
●●
●●
●●
●●
●●
●●
space.
Sealed combustion chamber draws air for combustion from out
of doors and exhausts the products of combustion to the outside
keeping room air fresh as springtime.
Telescoping vent assembly containing air inlet tube,
vent tube, and cap is included eliminating the need for
expensive and difficult-to-install vent pipe systems.
Wall mounted thermostat is standard or an optional
built-in bulb stat kit (BBSK) is available. Both provide
exact temperature control even if the power fails.
Controls include 100% safety pilot and pressure
regulator for safe, efficient operation.
Contemporary styling in attractive neutral bone finish
blends with any decor.
Louvered cabinet design maximizes airflow to provide
even temperatures from floor to ceiling.
Optional automatic blower provides even better air
circulation (fits all units). 81 CFM.
Model No. - Nat. Gas
CDV155
CDV255
CDV335
Model No. - L.P. Gas
CDV156
CDV256
CDV336
15,000
25,000
33,000
M. Volt
M. Volt
M. Volt
Wall Stat
Wall Stat
Wall Stat
29¾” H
31½” H
31½” H††
Input/Btu/hr.
Control
†
Dimensions
(height, width & depth)
††
18” W
34½” W
34½” W
9¾” D
9¾” D
9¾” D
Gas Inlet Size
½”
½”
½”
Vent Size
9” *
9” *
9” *
Centre of horizontal
vent to floor
22”
24⅛”
24⅛
Vent Cap Assembly Vent Cap Assembly Vent Cap Assembly
#VK1525/9” - 15” #VK1525/9” - 15” #VK1525/9” - 15”
Vent Cap Assembly Vent Cap Assembly
#VK1525/15” - 24” #VK1525/15” - 24”
Optional Equipment
Approx. Ship Weight
4
†
Includes ½” floor clearance
††
N/A
Thermostatically
Controlled Blower
#DVB-3
Thermostatically
Controlled Blower
#DVB-3
Thermostatically
Controlled Blower
#DVB-3
Optional Built-in
Bulb Stat Kit
#BBSK
Optional Built-in
Bulb Stat Kit
#BBSK
Optional Built-in
Bulb Stat Kit
#BBSK
65 lbs.
99 lbs.
99 lbs.
Includes 4” floor clearance
*Wall Opening
** Weight - 4 lbs.
ELECTRIC DUCT HEATERS/MINI MAKE UP AIR
Thermolec electric duct heaters are designed for
use in all forced air commercial and industrial HVAC
systems. Their applications vary from a partial
or auxiliary nature to being the major or principal
heat source in a building. Thermolec electric duct
heaters are custom computer designed to the most
stringent CSA standard to assure total safety.
●● Single heater units are rated to produce up to 22.5 KW per
square foot of duct area.
●● Multiple heaters can be made and field installed together to
accommodate large duct sizes or KW’s.
●● All voltages to 600-volt single and three phase are
available.
●● All Thermolec electric duct heaters are equipped with the
necessary automatic reset disc cut-outs.
●● All heaters of 30 KW and less and not in excess of 300
volts are also equipped with a manual reset disc cut-out.
●● Thermolec heaters can be equipped with a variety of control
options to accommodate any control system from basic
electric, electronic or pneumatic to the most sophisticated
DDC control (Direct Digital Control).
●● Wiring diagram is affixed to the control panel door for easy
reference during installation and service.
●● Mini Make Up Air is designed to complement your heating system
by pre-heating this fresh air, thus continuously providing comfortable
ventilation throughout the house.
●● Equipped with the most advanced modulating controller and air
sensor, the Mini Make Up Air mini fresh air make-up uses the minimum
amount of energy required to meet your needs.
●● The air flow sensor detects the amount of air flowing through the unit
and modulates the heating capacity accordingly, maximizing savings.
AVAILABLE SIZES
FEATURES
●● Provides up to 600 CFM of tempered
fresh air @0.2” S.P.
●● Current transformer
●● Modulated heat
●● Washable filter.
●● Compact size.
●● Units are available in a wide range of
sizes from 6” to 12” collars, single phase
or 3 phase up to 20 KW capacity.
600CFM
Fan
100CFM Fan
300CFM Fan
Collar Size 6
6”
8”
10”
12”
Single Phase
•
•
•
•
•
•
•
•
240
600
600
600
600
3
3
6
10
20
18½”
x 8” x
10½”
18½”
x 8” x
10½”
18½”
x 8” x
10½”
18½”
x 8” x
10½”
18½” x
8”
x 10½”
Room
Controller
Current
Sensor
Current
Sensor
Current
Sensor
Current
Sensor
Three Phase
Max Voltage
Max KW
Dimensions
(X x Y x Z)
Controls Included
6”
5
UNIT HEATERS
GAS-FIRED UNIT HEATERS
RESIDENTIAL, COMMERCIAL & INDUSTRIAL
Hot Dawg® may be installed in residential or commercial applications just one inch below the ceiling.
80% thermal efficiency for fuel savings.
Uses natural or propane gas (field convertible from natural to propane gas).
Certified for residential, commercial and Industrial use.
Lightweight, easily installs 1” from ceiling with only two angle brackets (standard on 30·75, accessory for 100-125).
Install quickly and easily with knockouts lor quick access to gas and electricity.
The standard power exhauster allows the unit to be vented vertically or horizontally and is designed to use the smallest
diameter vent pipe possible.
●● Permanently-lubricated motor for troubleMODEL HD SIZES
free dependability.
●● Full 10-year warranty on heat exchanger.
30
45
60
75
100
125
●● Available in both propeller fan and
centrifugal blower configurations.
●●
●●
●●
●●
●●
●●
●●
Btu/Hr Input
30,000
45,000
60,000
75,000
100,000
125,000
Btu/Hr Output
24,000
36,000
48,000
60,000
80,000
100,000
Entering Airflow
(CFM) @70°F
505
720
990
1160
1490
1980
Air Temp. Rise
(°F)
44
46
45
48
50
47
Max. Mounting
Height (Ft.)
10
10
12
14
12
16
Heat Throw (Ft.)
@ Max. Mtg. Ht.
25
27
36
38
42
56
The PDP propeller, power vented gas-fired unit heater is a product that is inexpensive to install, easy to
use, and offers excellent in-service economy. The PDP model series expands on the size range of the HD
model series providing product that is certified for commercial and industrial applications in sizes from
150 through 400MBH.
MODEL PDP SIZES
150
Btu/Hr Input
175
200
250
300
350
400
150,000 175,000 200.000 250.000 300,000 350,000 400,000
Btu/Hr Output 120,000 140,000 160,000 200,000 240,000 280.000 320,000
Entering
Airflow (CFM)
@70°F
Air Temp.
Rise (°F)
6
Max.
Mounting
Height (Ft.)
Heat Throw
(Ft.) @ Max.
Mtg. Ht.
2180
2550
2870
3700
4460
4870
5440
51
51
52
50
50
53
54
16
17
15
19
21
20
19
55
59
51
67
74
70
69
UNIT HEATERS
Recommended Sizing Guide
UNIT
APPLICATION
FSA 30
1 to 1.5 car garage
FOA/FSA 45
2 to 2.5 car garage
FOA/FSA 60
3 to 3.5 car garage
FOA/FSA 75
un-insulated or larger, detached garage
FSA Cayenne™ Series - Low Profile Unit Heaters
FSA Series Application & Benefits:
Residential - low profile units
Great for garages & shops
Wiring junction box is located inside of unit
Self-diagnostic board with LED display improves
troubleshooting
●● 1” clearance from ceiling for easy installation
●●
●●
●●
●●
FSA Model Size Gas Input (MBTUH)
30
45
Height (in)
60
75
12
17
Depth (in)
13 ½
Width (in)
25
Flue Connection Size* (in)
3
4
Gas Connection Size NPT (in)
½
*diameter of round pipe - adapter furnished with heater.
FOA Series - Separated Combustion Unit Heaters
FOA Series Application &
Benefits:
●● Perfect for light commercial and greenhouse
applications
●● Introduces clean combustible outside air when required
●● Wiring junction box is located inside of unit.
FOA Model Size Gas Input (MBTUH)
45
Height (in)
12
60
75
100
17
125
150*
21
200*
27
Depth (in)
18 ½
32 ⅜
Width (in)
26
36 ½
Flue Connection Size** (in)
3
4
250*
300*
39
5
½
6
¾
* sizes are not approved for residential application.
**diameter of round pipe - adapter furnished with heater.
7
UNIT HEATERS
SEP Series - Commercial unit heaters
SEP & HED Features:
●●
●●
●●
●●
Integrated j-nuts for easy installation using threaded rod.
Heat exchangers are laboratory life-cycle tested.
Easy to clean in-shot burners.
Self-diagnostic board with indicator lights.
SEP Model Size (MBTUH)
100
115
145
175
200
230
Height (in)
32 3/16
Depth (in)
32 5/16
Width (in)
20 3/16
Flue Connection Size** (in)
4
250
300
23 ⅛
400
41 ⅛
5
345
6
½
¾
●● Easy Installation
♦ Compact - minimal space required
♦ Zone heating - direct heating where you need it
♦ Wide range - many sizes and types from which to choose
●● Money Saving Operation
♦ Energy efficient
●● Aesthetically pleasing
♦ Industrial strength with showroom appearance
Gas Fired Unit Heaters
GOOD
BETTER
Model
UDAP
UDBP
UDAS
UDBS
UEAS
Fuel Efficiency
Up to 83%
Up to 83%
Up to 83%
Up to 83%
Up to 93%
Axial Propeller Fan
4
4
Ductable Blower
Power Vented
Heating Technology
4
4
4
4
4
4
Separated Combustion
8
BEST
4
4
Tcore
2®
Tcore
2®
Tcore
4
4
2®
Tcore
4
2®
Tcore3®
Heating Range (MBH)A
30 - 400
30 - 400
30 - 400
30 - 400
30 - 400
CFM Range
450-5, 125
450-5, 125
500-6, 200
500-6, 200
2,250-4, 275
SUPERIOR RADIANT
SERIES AM - MODULATING TUBE HEATER
FEATURES
●● More heaters per circuit with self diagnostic
ignition (DSI).
●● Fully modulates gas and air.
●● Fully automatic or manual control of burner
modulation.
●● Self-regulating, no fixed points - adapts to
the demand regardless of conditions.
●● Simple, effective controls.
●● Separated controls compartment.
●● Parabolic aluminum reflectors.
●● Nickel-chromed Jet Stream burner cup.
ELECTRICAL RATING
120 VAC 60 Hz 1A
plug connector
GAS CONNECTION
1/2” NPT
TUBE DIAMETER
Combustion air 4”
Flue 4”
MINIMUM GAS INLET
Natural Gas 5.3” W.C.
LPG Gas 11.8” W.C.
SPECIFICATIONS
MODEL
NG OR LPG
AM-80
AM-115
AM-150
AM-200
HIGH FIRE
RATE
(BTU/HR)
80,000
115,000
150,000
200,000
LOW FIRE
RATE
(BTU/HR)
48,000
69,000
90,000
115,000
MIN.
LENGTH
(FEET)
20
30
40
50
MAX.
LENGTH
(FEET)
30
40
50
60
SERIES U - SINGLE STAGE INFRARED
Model UA - Heavy duty industrial/commercial
infrared heater with a built in low voltage option.
Model UX - Features an enclosed burner design
further enhancing all of the great features of the UA
for hard service applications.
Model UXR - Includes all of the features in a Model
UX plus a potted module, sealed burner housing and
heat-treated aluminized tube for harsh environments.
Stainless Steel housing available. CSA approved for
outdoor use.
FEATURES
●● Rates 40,000 to 220,000 BTU/HR.
●● Separated Controls Compartment.
●● Self Diagnostic Ignition Module.
●● 100% Parabolic Aluminum Reflectors.
●● Heavy Duty Couplings.
●● Direct Spark Ignition.
●● 24v Direct Wire for Thermostat.
●● Jet Stream Burner.
●● Vented or Unvented.
ELECTRICAL RATING
120 VAC 60 Hz 1A
plug connector
GAS CONNECTION
1/2” NPT
TUBE DIAMETER
Combustion air 4”
Flue 4”
MINIMUM GAS INLET
Natural Gas 5” W.C.
MODEL
NG OR LPG
RATE
BTU/HR
(NG or LPG)
MIN.
MAX.
LENGTH LENGTH
(FEET)
(FEET)
UA/UX/UXR 40
40,000
10
20
UA/UX/UXR 60
60,000
15*
30
UA/UX/UXR 80
80,000
20
40
UA/UX/UXR 100
100,000
20
50
UA/UX/UXR 125
125,000
30
50
UA/UX/UXR 150
150,000
40
60
UA/UX/UXR 175
175,000
50
60
UA/UX/UXR 205
205,000
50
60
UA/UX/UXR 220
220,000
60
70
SERIES L & SERIES LT - LONG, LOW & EVEN HEAT
Series L single stage heaters are designed for low ceiling
applications such animal confinements, hallways and service
counters.
ELECTRICAL RATING
GAS CONNECTION
Model LA - External Blower
Model LX - Enclosed Blower
Model LXR - Outdoor Sealed Housing
●● Rates 40,000 to 100,000
BTU/HR
●● Separated Controls
Compartment
●● Self-Diagnostic Ignition
module.
●● Parabolic Aluminum
120 VAC 60 Hz 1A
plug connector
1/2” NPT
TUBE DIAMETER
Combustion air 4”
Flue 4”
MINIMUM GAS INLET
Reflectors.
●● 24v Direct Wire for
Thermostat.
●● Vented or Un-vented
SPECIFICATIONS
SERIES LA / LX / LXR LONG, LOW & EVEN
INFRARED HEATERS
HIGH FIRE
MIN.
MAX.
MODEL
RATE
LENGTH
LENGTH
NG OR LPG
BTU/HR
(FEET)
(FEET)
LA/LX/LXR 40
40,000
30
40
LA/LX/LXR 60
60,000
30
50
LA/LX/LXR 80
80,000
40
60
LA/LX/LXR 100
100,000
50
50
9
SUPERIOR RADIANT
SERIES T - TWO STAGE INFRARED HEATERS
Model TA - Heavy duty industrial/commercial two stage
infrared heater.
Model TX • Enclosed burner design further enhancing
all of the great features of the TA for hard service
applications.
Model TXR - As the Model TX with extra features
for harsh and outdoor environments. TXR includes a
potted module, sealed burner housing and heat-treated
aluminized. Stainless steel available.
SPECIFICATIONS
SERIES TA / TX / TXR TWO STAGE INFRARED HEATERS
HIGH FIRE
RATE
LOW FIRE
RATE
MIN.
LENGTH
MAX.
LENGTH
TA/TX/TXR 40
40,000
30,000
10
20
TA/TX/TXR 60
60,000
45,000
15*
30
TA/TX/TXR 80
80,000
60,000
20
40
TA/TX/TXR 100
100,000
75,000
20
50
TA/TX/TXR 125
125,000
95,000
30
50
TA/TX/TXR 150
150,000
115,000
40
60
TA/TX/TXR 175
175,000
130,000
50
60
TA/TX/TXR 205
205,000
160,000
50
70
TA/TX/TXR 220
220,000
165,000
60
70
MODEL
NG OR LPG
BTU/HR
BTU/HR
(FEET)
(FEET)
FEATURES
●● Rates 40,000 to 220,000 BTU/HR.
●● Separated Controls Compartment.
●● Self Diagnostic Ignition Module.
●● Parabolic Aluminum Reflectors.
●● 24v Direct Wire for Thermostat.
●● Vented or Unvented.
ELECTRICAL RATING
120 VAC 60 Hz 1A
plug connector
GAS CONNECTION
1/2” NPT
TUBE DIAMETER
Combustion air 4”
Flue 4”
MINIMUM GAS INLET
Natural Gas 5.0” W.C.
SERIES GR - RESIDENTIAL GARAGE HEATER
FEATURES
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
10
●●
30,000 to 45,000 Btu/Hr.
Natural Gas and LPG.
Aluminized (HT) radiant tube.
Approved to residential standards
- AGA Reg 7-89, CAN/CGA 2.5-M86.
Direct Spark ignition.
Thermostat and gas flex included.
CSA approved for outdoor use.
Pre-assembled construction - no loose parts, simplified installation.
Thermal efficiencies above 82%.
Self-diagnostic ignition module.
RATE
Balanced flue construction - one wall
MODEL
BTU/HR
opening, maximum safety, minimum
GR-30
30,000
installation cost.
Vertical venting kit optional.
GR-45
45,000
SHIPPING
WEIGHT
DIMENSIONS
109 lbs. (50 kg.)
17.5” x 8” x 118”
109 lbs. (50 kg.)
17.5” x 8” x 118”
AIR CONDITIONERS
SPLIT-SYSTEM AIR CONDITIONERS
LX SERIES 13.0 & 14.5 SEER
CLIMASURE™ SERIES 13.0 & 14.5 SEER
GUARDIAN™ SERIES 13.0 SEER
FEATURES
●● Compact Footprints ideal for Town Homes, Condos and Zero Lot Line.
●● Industry leading Microchannel Coil Technology adopted from the
automotive industry:
●● 30% lighter versus standard coil technologies
●● Easy to clean, service and repair.
●● Excellent heat transfer performance
●● 50% less refrigerant charge than conventional coils
●● Pre-painted Galvanized Steel provides many years of attractive
appearance.
●● Pleasing sound levels are ideal for new construction or replacement
applications.
RAC (1 PHASE) 13.0 SEER (R-410A REFRIGERANT)
BASE-TIER (GUARDIAN™)
LENGTH
PART NUMBER
HEIGHT (in) WIDTH (in)
(in)
WEIGHT
(lb.)
RAC13J184S21
28-1/4
24
24
97
RAC13J244S21
28-1/4
24
24
129
RAC13J304S21
28-1/4
24
24
131
RAC13J264S21
28-1/4
29-1/2
29-1/2
145
RAC13J424S21
30-1/4
29-1/2
29-1/2
173
RAC13J484S21
30-1/4
29-1/2
29-1/2
173
RAC13J604S21
32-1/4
34
34
195
GUARDIAN™ R-410A 13.0
SEER SERIES
Standard 5-Year parts /
10-Year compressor limited
warranty.
GCGD (1 PHASE) 13.0 SEER (R-22 DRY SHIP REPLACEMENT
OUTDOOR UNIT) BASE-TIER (GUARDIAN™)
GUARDIAN™ R-22 DRY
SHIP REPLACEMENT
COMPONENT
warranty.
PART NUMBER
HEIGHT (in)
WIDTH (in)
LENGTH (in)
WEIGHT
(lb.)
GCGD18S21S2X
28
23-1/2
23-1/2
130
GCGD24S21S2X
28
23-1/2
23-1/2
130
GCGD30S21S2
32
23-1/2
23-1/2
150
GCGD36S21S2
34
23-1/2
23-1/2
160
GCGD42S21S2
34
29
29
175
GCGD48S21S2
34
29
29
176
GCGD60S21S2X
40
29
29
200
11
AIR CONDITIONERS
TCJD (1 PHASE) 13.0 SEER (R-410A REFRIGERANT)
MID-TIER (LX)
PART NUMBER
HEIGHT (in) WIDTH (in) LENGTH (in) WEIGHT (lb.)
TCJD18S41S3
TCJD24S41S3
TCJD30S41S3
TCJD36S41S3
TCJD42S41S3
TCJD48S41S3
TCJD60S41S3
LX SERIES
13.0 & 14.5 SEER SINGLE
PHASE:
warranty.
Extended 10-Year parts,
limited warranty with
registration.
28
28
28
28
30
30
32
23-1/2
23-1/2
23-1/2
29
29
29
33-5/8
23-1/2
23-1/2
23-1/2
29
29
29
33-5/8
97
129
131
145
173
173
195
TCJF (1 PHASE) 14.5 SEER (R-410A REFRIGERANT)
MID-TIER (LX)
PART NUMBER
HEIGHT (in) WIDTH (in) LENGTH (in) WEIGHT (lb.)
TCJF18S41S3
28
29
29
125
TCJF24S41S3
28
29
29
128
TCJF30S41S3
36
29
29
130
TCJF36S41S3
36
29
29
145
TCJF42S41S3
34
33 5/8”
33 5/8”
172
TCJF48S41S3
36
33 5/8”
33 5/8”
180
TCJF60S41S3
40
33 5/8”
33 5/8”
199
ACCLIMATE™ 16 & 18 SEER
FEATURES
●● SilentDrive for low operating sound
levels
Composite Base Pan
Isolated Compressor Compartment
Quiet Scroll Compressor
Swept Wing Fan Blade
●● Factory wired controls.
●● Standard liquid line filter drier on all
models.
●● Standard 5-minute anti-cycle timer.
●● Demand Defrost Control.
●● Communications Capable with simple
4-wire installation.
●● Compatible with Luxaire residential
touch screen
●● Communicating control
●● Backwards compatible with traditional
thermostat
●● Dianostics and Auto-Setup
ACCLIMATE™ 16 SEER 1-STAGE (R410A MODELS)
PART NUMBER
WARRANTY SUMMARY:
warranty.
Extended 10-Year parts/
Lifetime compressor, with
registration.
Premium System Warranty Limited lifetime compressor
warranty when register online
within 90 days of installation.
12
AL6B024F3C
AL6B030F3C
AL6B036F3C
AL6B042F3C
AL6B048F3C
AL6B060F3C
WEIGHT (lb.) LENGTH (in)
184
191
218
237
258
263
WIDTH (in)
HEIGHT (in)
31
31
31
31
34
34
29½
29½
33½
39½
39½
39½
WIDTH (in)
HEIGHT (in)
34
34
34
34
39½
39½
39½
39½
37
37
37
37
42
42
ACCLIMATE™ 18 SEER 2-STAGE (R410A MODELS)
PART NUMBER
AL8B024F3C
AL8B036F3C
AL8B048F3C
AL8B060F3C
WEIGHT (lb.) LENGTH (in)
305
305
310
330
42
42
42
42
AIR CONDITIONERS
CMA SERIES CONDENSING UNITS
PART NUMBER
VOLTAGE
NOMINAL
COOLING
(TONS)
SHIPPING
WEIGHT
(lbs.)
CMA18SA-1
CMA24SA-1
CMA30SA-1
CMA36SA-1
208/230V
208/230V
208/230V
208/230V
1.5
2.0
2.5
3.0
106
132
180
191
FEATURES
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
WARRANTY:
1-Year Parts,
5-Year Compressor
13 SEER.
Environmentally friendly R410A.
Super quiet, dBA as low as 53.
Can be matched to any R410A Air Handler or Coil.
Attractive appearance.
Durable cabinet.
Low voltage control system.
Sleek and compact design.
Fits well everywhere.
TX valve must be 15% bleed through.
HORIZONTAL DISCHARGE AIR CONDITIONER
ACCLIMATE
MODELS TCHD18 - 60
SINGLE PHASE AND THREE PHASE
FEATURES
●● Performance - Efficiency levels from 13.0 SEER/11.0
●●
●●
●●
●●
●●
EER with a loose coil and up to 16.0 SEER/14.0 EER
when coupled with an ECM indoor blower.
Easy to install - Easy installation in tight spaces.
Units can be stacked two high using the approved
stacking kit.
SilentDrive™ System - Sound as low as 67 dBA.
Durable Cabinet - Heavy gauge steel cabinet and a
tubular base rail provide added support.
Agency Listed - The Acclimate Horizontal
Discharge Condensing Unit is CSA listed and AHRI
certified.
Zero lot line - only 6” minimum clearance from
structure.
SINGLE PHASE (208-230/1/60)
PART NUMBER
HEIGHT (in)
WARRANTY SUMMARY:
SINGLE PHASE MODELS: Standard 5-Year parts /
10-Year compressor limited warranty.
Extended 10-Year parts limited warranty with registration.
THREE PHASE MODELS: Standard 1-Year parts / 5-Year
compressor limited warranty.
WIDTH (in)
DEPTH (in)
TCHD18S41S3
25 ¼
37 ¼
17 ½
WEIGHT (lb.) REFRIGERANT
130
R-410A
TCHD24S41S3
TCHD30S41S3
TCHD36S41S3
TCHD48S41S3
TCHD60S41S3
37 ¼
37 ¼
37 ¼
43 ¼
43 ¼
45
45
45
45
45
20
20
20
20
20
195
195
215
240
250
R-410A
R-410A
R-410A
R-410A
R-410A
13
HEAT PUMPS/ROOM AIR UNITS
SPLIT-SYSTEM HEAT PUMPS
LX SERIES 13.0
CLIMASURE™ SERIES 13.0
FEATURES
●● Pleasing sound levels are ideal for new
construction or replacement applications.
●● LX Models have corner posts and a
slotted, stamped steel coil guard for
additional cabinet strength.
●● Climasure Models have a heavy
duty, tight-spaced wire coil guard and
secondary Polymer mesh for superior coil
protection.
THGD (1 PHASE) 13.0 SEER
(R-410A REFRIGERANT)
STANDARD-TIER (CLIMASURE™)
WIDTH
PART NUMBER HEIGHT
(in)
(in)
THGD18S41S3
24
33-1/2
THGD24S41S3
28
33-1/2
THGD30S41S3
28
33-1/2
THGD36S41S3
28
33-1/2
THGD42S41S3
30
33-1/2
THGD48S41S3
30
33-1/2
THGD60S41S3
32
33-1/2
LENGTH
(in)
33-1/2
33-1/2
33-1/2
33-1/2
33-1/2
33-1/2
33-1/2
WEIGHT
(lb.)
172
184
196
208
208
275
280
THJD (1 PHASE) 13.0 SEER
(R-410A REFRIGERANT) MID-TIER (LX)
WIDTH
LENGTH
PART NUMBER HEIGHT
(in)
(in)
(in)
THJD18S41S3
24
33-1/2
33-1/2
THJD24S41S4
28
33-1/2
33-1/2
THJD30S41S4
32
33-1/2
33-1/2
THJD36S41S4
36
33-1/2
33-1/2
THJD42S41S4
36
33-1/2
33-1/2
THJD48S41S4
36
33-1/2
33-1/2
THJD60S41S4
46
33-1/2
33-1/2
WEIGHT
(lb.)
172
184
196
208
208
275
280
ROOM AIR CONDITIONING THRU-THE-WALL
FEATURES
●●
●●
●●
●●
●●
●●
Electronic controls with full feature remote and auto restart.
Four-way adjustable air direction.
Energy saver function and 24-hour on/off timer.
Auto and sleep modes.
Interior trim kit included.
Fits standard wall sleeves
8,000 BTUH - 14,000 BTUH
PACKAGE TERMINAL UNITS
14
●● Condensate Dispersal System - “Slinger” system throws condensation onto the
condenser coil for evaporation.
●● Electronic Thermostat Control - LED display makes it easy to select
set point.
●● Modes - Cool, fan only (On and Auto); heat pump models alternate
between reverse cycle heat mode and electric heat mode.
●● Compressor Restart Time Delay - Prevents short cycling of the
compressor.
●● Freeze Protection - Automatically activated when needed to keep the
evaporator from freezing.
●● Memory - Restarts operation in the mode that was operating when
power was lost.
●● Fits Most Wall Sleeves - Designed for 42” x 16” x 21” sleeve;
matching wall sleeve and grille available as optional accessories.
●● Electric Heat - Designed for supplemental heating only, auto “ON” at 44°F
or below.
7,000 BTUH - 15,000 BTUH
ELECTRIC HEAT STANDARD
3.0 kW on 7K and 9K models.
3.0 or 5.0 kW on 12K and 15K models.
DUCTLESS SPLIT UNITS
DV SERIES - 15 SEER SINGLE ZONE DUCTLESS MINI-SPLITS SYSTEMS
FEATURES
●● Super Efficient - rated at 15 SEER for cooling
operation.
●● Whisper Quiet - High tech fan in the indoor unit
delivers balanced air flow.
●● Multiple Modes - Cooling, dehumidification
only, air circulation (heating in heat pump
models) plus:
• Sleep mode
• 24-hour timer
• Turbo mode
●● Auto Operation - Automatically adjusts to
maintain a constant temperature/humidity level.
●● Leak Detection - Signals if unit begins losing
refrigerant charge.
●● Auto Restart - Reverts to the last setting
following a power failure.
●● Defrost - On heat pump models; also sump
and crankcase heater.
9,000 BTUH to 24,000 BTUH
Indoor Unit
Includes a fully featured
wireless remote
PART # (COOLING ONLY)
FEATURES
Outdoor Unit
PART # (HEAT PUMP MODELS)
DVC09SD-0 DVC12SD-0 DVC18SD-1 DVC24SD-1 DVH09SD-0 DVH12SD-0 DVH18SD-1 DVH24SD-1
Power
Supply
115-1-60
115-1-60
Cooling
Capacity
(BTUH)
9,000
12,000
18,000
Heating
Capacity
(BTUH)
-
-
208/230-1-60 208/230-1-60
115-1-60
115-1-60
208/230-1-60 208/230-1-60
22,000
9,000
12,000
18,000
22,000
-
-
9,000
12,000
18,000
22,000
LINE SETS O.D. (inch)
Liquid
Connection
(flare) (inch)
1/4
1/4
1/4
3/8
1/4
1/4
1/4
3.8
Suction
Connection
(flare) (inch)
3/8
1/2
1/2
5/8
3/8
1/2
1/2
5/8
15
DUCTLESS SPLIT UNITS
MULTI-ZONE DUCTLESS MINI-SPLIT HEAT PUMPS
WARRANTY:
2-Year Parts,
6-Year Compressor
OUTDOOR UNITS
FEATURES
Power Supply
System Cooling Capacity (BTUH)
Min./Max. Cooling Capacity (BTHH)
SEER/EER
A-VFH18DA-1
208/230-1-60
18,000
7,000/21,000
16.00/ 10.20
A-VFH24TA-1
208/230-1-60
26,000
7,500/33,000
16.00/ 8.20
A-VFH30QA-1
208/230-1-60
29,000
7,500/34,000
16.0/ 7.30
HIGH WALL MOUNT INDOOR UNITS
A-VFH36QA-1
208/230-1-60
34,000
8,530/34,120
16.0/ 7.90
A-VFH42PA-1
208/230-1-60
40,000
8,530/46,403
16.0/ 9.30
CEILING CASSETTES
FEATURES
B-VFH09MA-1 B-VFH12MA-1 B-VFH18MA-1 B-VFH12CA-1 B-VFH18CA-1 B-VFH24CA-1
Cooling Capacity (BTUH)
9,000
12,000
18,000
12,000
14,400
22,800
Heating Capacity (BTHH)
9,800
13,000
19,000
13,000
16,000
27,400
Temperature Setting
On Remote: 61°F - 86°F
On Remote or Wired Wall Thermostat
DUCTLESS SINGLE & MULTI ZONE SYSTEMS
LX 16 SEER HP MULTI ZONES
- INDOOR UNITS
PART NUMBER
TONNAGE
DHPM09NWM42Q1
3/4
DHPM12NWM42Q1
1
DHPM18NWM42Q1
1 1/2
LX 16 SEER HP MULTI ZONES
- OUTDOOR UNITS
VOLTAGE
208/230/1 Phase/60
Hz
PART NUMBER
TONNAGE
DHMF18CMM42Q1
1 1/2
DHMF24CMM42Q1
2
DHMF30CMM42Q1
2 1/2
DHMF42CMM42Q1
3 1/2
VOLTAGE
208/230/1 Phase/60
Hz
LX 16 SEER AC SINGLE ZONE
16
OUTDOOR PART NUMBER
INDOOR PART NUMBER
TONNAGE
DHMF09CSM42Q1
DHMF09NWM42Q1
3/4
DHMF12CSM42Q1
DHMF09NWM42Q1
1
DHMF18CSM42Q1
DHMF18NWM42Q1
1 1/2
DHMF24CSM42Q1
DHMF24NWM42Q1
2
VOLTAGE
208/230/
1 Phase/60 Hz
LUXAIRE AIR HANDLERS
RESIDENTIAL (INDOOR) AIR HANDLERS
For use with Split System Cooling and Heat Pumps
COMMON FEATURES FOR ALL AIR HANDLER MODELS:
●● Durable finish inside/out using pre-painted galvanized steel construction.
●● All cabinets insulated with 1” foil faced insulation (R-4.2) to prevent sweating (AHX61 has
optional 1” insulation).
●● Factory sealed to achieve 2% or less air-flow leakage under duct blaster conditions.
●● Positive drainage designed drain pans prevent water from accumulating in coils for improved
performance.
●● Drain pans made of thermo-set plastics for durability, UVC and temperature resistance.
●● Thermal Expansion valves are field installed bolt-on design where required.
●● All York air handlers are certified to the UL 1995 standards by CSA (except for the AHX61).
AVG SINGLE PIECE AIR HANDLERS:
●● AVG models are shipped as upflow / horizontal right models,
and are field convertible to downflow or horizontal left.
●● AVG models are 4 position capable, no downflow kit
required.
●● AVG models use variable speed ECM Motors with
ClimaTrak comfort settings and are communications
capable.
WARRANTY:
10 Year Limited Parts Warranty (with registration to
original howeowner).
5 Year Limited Parts Warranty (non-registered).
1 Year Limited Parts Warranty on 3-phase models.
5 Year Limited Warranty on Electrict Heater Elements.
AHR/ahe/ahv
SINGLE PIECE AIR HANDLERS:
●● AHR, AHE, and AHV models are shipped as upflow/horizontal
●●
●●
●●
●●
right models, and are field convertible to downflow/horizontal left
configuration.
AHR models use standard, direct-drive multi-speed PSC motors to
match any application.
AHE models use standard, 5-speed programmable ECM motor
(high efficiency brushless DC motor) for SEER enhancement.
AHV models use variable speed ECM motors with ClimaTrak
comfort settings and are communications capable.
AHR/AHE/AHV models are 4 position.
LX SERIES AIR HANDLERS
Nominal
Capacity
(tons)
LX Single-Piece (AHE, AHX)
PART NUMBER
AHE1883XH21
AHE2483XH21
AHE3083XH21
AHE36C3XH21
AHE4203XH21
AHE4803XH21
AHE6003XH21
AHE6104PH21
AHX61040PI21
1.5
2.0
2.5
3.0
3.5
4.0
5.0
5.0
5.0
Refrigerant/
Metering
Device
Height
Width
Depth
Filter
(inches)
Flex or TXV
Flex or TXV
Flex or TXV
Flex or TXV
Flex or TXV
Flex or TXV
Flex or TXV
Flex or TXV
Flex or TXV
46
46
46
52
57
57
57
57
57
17½
17½
17½
21
24½
24½
24½
24½
24½
21½
21½
21½
21½
21½
21½
21½
21½
21½
16 x 20
16 x 20
16 x 20
20 x 20
22 x 20
22 x 20
22 x 20
20 x 20
20 x 20
Dimensions (inches)
ACCLIMATE™ AIR HANDLERS
Nominal
Refrigerant/
Capacity
Metering
(tons)
Device
Acclimate™ Variable-Speed (AVG)
MODEL
AVG24B**H21
AVG36C**H21
avg48d**h21
AHE36C3XH21
2
3
4
5
Flex or TXV
Flex or TXV
Flex or TXV
Flex or TXV
Dimensions (inches)
Height
Width
Depth
Filter
(inches)
46
52
57
57
17½
21
24½
24½
22½
22½
22½
22½
16 x 20
20 x 20
22 x 20
22 x 20
17
ADP AIR HANDLERS
B SERIES - MULTI-POSITION & HYDRONIC AIR HANDLERS
FEATURES:
●● Suitable for use with R-22 and R-410A.
●● Multi-position available from factory and
field convertible.
●● Suitable for potable water systems.
●● Control board comes standard factory installed on aIl Air
Handlers.
●● Coils are air pressure tested at 500 PSI, pressure tested with
Helium, sealed and then charged with dry air.
●● Piston, A/C TXV, or HP TXV available factory installed. Screwon TXV’s also available for field installation.
●● Easy to adjust blower speeds for fine tuning customer comfort.
air handler size
Dimensions
12
18
24
25
30
31
36
37
42
48
60
Height (in)
44
44
44
48
48
49
48
49
49
49
53
Depth (in)
22
22
22
22
22
26
22
26
26
26
26
Width (in)
15
15
15
18½
18½
20
18½
20
20
20
22
F SERIES - PREMIER LOW PROFILE AIR HANDLERS
Electric or No Heat, with available 5-Speed High Efficiency ECM Motor
FEATURES:
●● Available from factory as upflow or uplow/horizontal. Field
installed horizontal drain pan kit also available.
●● Filter rack built into every air handler (filter not included).
●● Coils are pressure tested at 500 PSI, pressure tested with
Helium, charged with dry air and then sealed.
●● Suitable for use with R-22 and R-410A.
●● 120 V 60 Hz, 208/240 V 60 Hz, and 220 V 50 Hz supply
voltages available.
●● 5-speed high efficiency ECM motor available.
●● Dynamically balanced blowers for quiet, vibration-free
operation.
●● Electric heat available factory installed or as kit for field
installation.
air handler size
Dimensions
18
18
24
25
30
31
36
37
42
48
60
Height (in)
36
36
41
41
48
41
48
48
48
48
Depth (in)
22
22
22
22
26
22
26
26
26
26
Width (in)
15
15
18½
18½
18½
21⅞
18½
21⅞
21⅞
21⅞
AIRMAX AIR HANDLERS
MAXAIR™ HIGH VELOCITY
Max Air Specifications
Max 30
Max 50
Max 70
Max 100
BTUH Heating @ 180°F EWT
39,382
55,649
77,981
98,593
35,769
49,971
69,804
89,630
32,159
44,700
58,902
80,666
28,553
39,086
50,519
71,704
24,951
35,195
46,278
62,741
21,356
30,250
41,000
53,500
DX Cooling (Tons)™
1.0
1½ - 2.0
2 - 2½
2½ - 3
C.F.M. @ 1.5” E.S.P.
350
580
750
952
●● The MAXAIR fan coil is so compact that it fits anywhere: laundry room, attic, crawl space.
You can even place it in a closet.
●● Can be mounted for vertical or horizontal airflow.
●● Can be combined with humidifiers, high efficiency air cleaners or ERVs / HRVs.
●● All mechanical and electrical components are accessible from the front of the unit.
●● Heating coil and fan/motor slide out for easy service.
●● One of the most extensive warranties in the business:
1-year parts and labour, 2-years on parts, only where
applicable.
MAXAIR™ HIGH VELOCITY with PRIORITY
MAXAIR Specifications
Max 30”e” Max 50 ”e” Max 70 ”e” Max 100 ”e”
39,382
55,649
77,981
98,593
35,769
49,971
69,804
89,630
32,159
44,700
58,902
80,666
28,553
39,086
50,519
71,704
24,951
35,195
46,278
62,741
21,356
30,250
41,000
53,500
DX Cooling (Tons)(1)
1.0
1½ - 2.0
2 - 2½
2½ - 3
C.F.M. @ 1.5” E.S.P.
350
580
750
952
●● With the increased efficiency of this optional Electronically Commuted Motor (ECM), homeowners will be free to cycle air
continuously with a minimal increase in electricity cost
●● Continuous fan operation helps improve filtration, reduce temperature variations, and helps keep the air dear of dust and
allergens to make your customers’ homes more comfortable.
●● Electronically commuted motors (ECM) are ultra high efficient programmable brushless DC motors that are more efficient
than the permanently split capacitor (PSG) motors used in most residential furnaces This is especially true at lower speeds
used for continuous circulation in many new homes.
Model
MaxAir 50e MaxAir 70e
MaxAir
P2/P3
P2/P3
100e P2/P3
55,649
77,981
98,593
49,971
69,804
89,630
44,700
50,519
71,704
39,086
50,519
62,741
35,195
46,278
62,741
30,250
41,000
53,500
TX Cooling (Tons)™
1.0 to 2.0
2.0 to 2.5
2.5 to 3.0
C.F.M. @ 1.5” E.S.P.
580
750
950
19
AIRMAX AIR HANDLERS
MAXAIR™ LOW VELOCITY FAN COIL SYSTEMS
FEATURES:
●● Hydronic Air Handler can accommodate most
brands of heating coils and chilled water coils.
This allows HVAC professionals to use the
equipment of their choice.
●● Hydronic furnace requires no venting or gas lines
with reduced installation costs.
●● Optional ultra high efficient electronic commutated
motor (ECM) to produce constant air circulation
while using very little energy.
●● Hydronic Heating using a hot water coil delivering
comfortable, efficient heat to your home.
●● Multi-poisition and flexible installation (basement,
closet, crawl space or attic) used in new
construction and retrofit applications.
MAXAIR™ Model
●● Can accommodate cooling, humidifiers,
HRVs and whole house air cleaners while
utilizing conventional ducting systems.
●● Must be matched with a dual purpose
tankless hot water heater, boiler, water
heater or heat pump.
●● Three compact sizes ranging from 25,000 BTUH Heating @ 130°F EWT
BTU to 153,590 BTU and from 1 to 4 tons DX Cooling (Tons)
C.F.M. @ 0.5” E.S.P.
of cooling.
30 LV
30e LV
50 LV
50e LV
48,393
46,236
60,047
72,850
43,938
41,983
54,496
66,085
39,488
37,735
48,953
59,334
35,045
33,492
43,422
52,601
30,610
29,257
37,904
45,888
26,186
25,031
32,404
39,202
1
1
1 - 1½
1½ - 2
450
425
600
830
MAXAIR™ Model
70 LV
70e LV
70e LV HO
100 LV
79,316
95,496
103,541
122,103
136,268
153,390
71,780
86,566
93,833
110,753
123,548
139,150
64,428
77,662
84,156
99,427
110,862
124,941
57,098
68,790
74,518
88,132
98,216
110,768
49,795
59,957
64,924
76,875
85,621
99,791
42,523
51,169
55,386
65,664
73,087
82,565
2
2 - 2½
2½ - 3
3
4
4
850
1,050
1,200
1,300
1,700
1,600
DX Cooling (Tons)
C.F.M. @ 0.5” E.S.P.
100e LV
100eLV HO
MAXAIR™ COOLING COILS
PART NUMBER
20
CAPACITY
REFRIGERANT
L
W
WEIGHT
AIRFLOW
FOR
NOMINAL
COOLING
(CFM)
D
COIL SIZE
MA-24-50-1-R410-A
12,000 BTU’s
R-410a
19
4.5
15
400
18
11x16x2Rx10fpi
MA-24-50-R410-A
18,000 BTU’s
R-410a
19
4.5
12
600
18
11x16x4Rx10fpi
MA-24-50-R410-A
24,000 BTU’s
R-410a
19
4.5
15
800
18
11x16x4Rx10fpi
MA-30-70-R410-A
30,000 BTU’s
R-410a
23
4.5
20
1000
18
15x16x4Rx10fpi
MA-36-100-R410-A
36,000 BTU’s
R-410a
23.5
4.5
25
1200
18
19x16x4Rx10fpi
EVAPORATOR COILS
HE SERIES UNCASED
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
High efficiency lanced fin design.
“No-hassle” 5 year warranty.
R-22, R410A, AC & Heat Pump compatible.
All coils have durable packaging with bar coded labels on the box.
Coils are air pressure tested at 500 PSI, leak tested with Helium, sealed
with rubber plugs, then charged with dry air.
Liquid line refrigerant connections are 3/8” ODF.
Cabinet insulation hold down tabs for easy drain pan removal.
Suction line refrigerant connections are 3/4” ODF (A-Coil 18-36 size
models) or 7/8” ODF (A-Coil 42-60 size models).
Cased coils have heavy gauge galvanized cabinets fully lined with 5/8”
foil faced insulation.
All A-Coils are upflow or downflow capable.
No labour allowance warranty for parts.
PART NUMBER
HE21118A140ADIR
HE30124A140ADIR
HE31130A140ADIR
HE32136A170ADIR
HE34142A200A000473
HE35148A200A000476
HE48160A200A000493
HE31930A140A0004AP
HE32936A155DIR
HE36960A200A0004AP
DESCRIPTION
Evaporator A-Coil 13 Seer R410A Uncased
Evaporator A-Coil 14.5 Seer R410A TXV Uncased
DIMENSIONS
(W x D x H)
TONS
1.5
2
2.5
3
3.5
4
5
2
2.5 - 3
3.5 - 5
14” x 19½” x 13”
14” x 19½” x 11”
14” x 19½” x 13”
15½” x 19½” x 15”
20” x 19½” x 19”
20” x 19½” x 21”
20” x 19½” x 27”
14” x 19½” x 13”
15½” x 19½” x 17”
20” x 19½” x 23”
CA SERIES UNCASED UPLFOW / DOWNFLOW COILS
Standard Specifications:
●● Rifled copper tubing, enhanced aluminum fins.
●● Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
●● Liquid line - 3/8” ODS, suction line - 3/4” ODS on 1-1/2 - 3 ton & 7/8” ODS
on 3-1/2 - 5 ton.
●● Externally mounted flowrater body with Schrader valve for hiss-testing.
●● Upflow without field modification. Downflow applications require plate kit,
included.
●● AHRI certifiable with all brands of A/C and heat pump systems.
●● ETL listed for use with both R-22 and R-410a when proper metering device
is used.
●● Ten year limited warranty.
PART NUMBER
DESCRIPTION
TONS
DIMENSIONS
(W x D x H)
CA24A2G-130L
CA30A2G-130L
Evaporator A-Coil 13 Seer R-22/410A Flowrater (No TXV) ASPEN
2
2.5
13” x 19⅜” x 13½”
13” x 19⅜” x 15½”
CA36A2G-160L
CA42A2G-160L
3
3.5
16” x 19⅜” x 17½”
16” x 19⅜” x 19½”
CA48A2G-195L
CA60A2G-195L
4
5
19½” x 19⅜” x 21½”
19½” x 19⅜” x 25½”
21
EVAPORATOR COILS
MULTI -POSITION FULL CASED COILS
MC Models, Multi·Position Coils
MC coils have the added flexibility
that allow them to be installed in
any position - upflow, downflow or
horizontal right or left.. This coil
can be easily installed with a UPG
furnace or modular air handler in any
configuration.
MODELS
HEIGHT
MC18A
MC18B
MC24A
MC24B
MC30A
MC30B
MC32A
MC35B
MC35C
MC36A
MC36B
MC36C
MC37A
MC42B
MC42C
MC43B
MC43C
MC48C
MC48D
MC60D
MC62D
A
22
22
26½
26½
26½
26½
22
22
22
26½
26½
26½
26½
32
32
26½
26½
32
32
32
36
DIMENSIONS
WIDTH
OPENING WIDTHS
B
14½
17½
14½
17½
14½
17½
14½
17½
21
14½
17½
21
14½
17½
21
17½
21
21
24½
24½
24½
C
13⅜
16⅜
13⅜
16⅜
13⅜
16⅜
13⅜
16⅜
19⅞
13⅜
16⅜
19⅞
13⅜
16⅜
19⅞
16⅜
19⅞
19⅞
23⅜
23⅜
23⅜
D
13½
16½
13½
16½
13½
16½
13½
16½
20
13½
16½
20
13½
16½
20
16½
20
20
23½
23½
23½
FULL CASED COILS
FC Models, Fully Cased
Full cased coils are suitable for use in
upflow or downflow applications.
22
MODELS
HEIGHT
FC18A
FC18B
FC24A
FC24B
FC30A
FC30B
FC32A
FC35B
FC35C
FC36A
FC36B
FC36C
FC37A
FC42B
FC42C
FC43B
FC43C
FC48C
FC48D
FC60C
FC60D
FC62D
FC64D
A
18
18
22
22
22
22
20
20
20
24½
24½
24½
24½
28
28
24½
24½
28
28
28
28
32
36
DIMENSIONS
WIDTH
OPENING WIDTHS
B
14½
17½
14½
17½
14½
17½
14½
17½
21
14½
17½
21
14½
17½
21
17½
21
21
24½
21
24½
24½
24½
C
13⅜
16⅜
13⅜
16⅜
13⅜
16⅜
13⅜
16⅜
19⅞
13⅜
16⅜
19⅞
13⅜
16⅜
19⅞
16⅜
19⅞
19⅞
23⅜
19⅞
23⅜
23⅜
23⅜
D
13½
16½
13½
16½
13½
16½
13½
16½
20
13½
16½
20
13½
16½
20
16½
20
20
23½
20
23½
23½
23½
EVAPORATOR COILS
HORIZONTAL DUCT COILS
DIMENSIONS
WIDTH
OPENING WIDTHS
MODELS
HEIGHT
A
B
C
D
HD24S
HD36S
HD48S
HD60S
24
28
28
30
28¾
28¾
34¾
24¾
21⅝
25⅝
25⅝
27⅝
23¾
23¾
29¾
29¾
HD Models, Horizontal Duct Coils
Dedicated horizontal, slab coil available for both cooling and heat pump
applications. Field transition may be required.
PARTIAL CASED COILS
PC Models. Partial Case Coils
These coils are designed for
installation on top of upflow furnaces.
The partial case height on these coils
allows for the flexibility of fabricating
the upper portion of the coil casing in
the field. The partial cased coils are
for use in upflow only applications.
MODELS
HEIGHT
PC18A
PC18B
PC24A
PC24B
PC30A
PC30B
PC32A
PC35B
PC35C
PC36A
PC36B
PC36C
PC37A
PC42B
PC42C
PC43B
PC43C
PC48C
PC48D
PC60C
PC60D
A
17¾
17
21⅞
21⅜
21⅞
21⅜
20
18⅞
18¾
23⅞
23⅛
22⅞
23⅞
27⅝
27⅛
23⅛
22⅝
25⅜
24⅝
27½
26⅞
DIMENSIONS
WIDTH
OPENING WIDTHS
B
14½
17½
14½
17½
14½
17½
14½
17½
21
14½
17½
21
14½
17½
21
17½
21
21
24½
21
24½
C
13⅜
16⅜
13⅜
16⅜
13⅜
16⅜
13⅜
16⅜
19⅞
13⅜
16⅜
19⅞
13⅜
16⅜
19⅞
16⅜
19⅞
19⅞
23⅜
19⅞
23⅜
D
13½
16½
13½
16½
13½
16½
13½
16½
20
13½
16½
20
13½
16½
20
16½
20
20
23½
20
23½
HD & HH Series
PART NUMBER
NOMINAL
TONNAGE
WIDTH
HD13136E175B264767
1 - 3*
21½
26½
17½
50
HD17148E210B264776
4
21½
26½
21
56
HD18160E245B264793
5
21½
26½
24½
58
DEPTH HEIGHT
WEIGHT
(lbs)
* with appropriate TXV
23
EVAPORATOR COILS
OVERALL
PLENUM
NOMINAL
WEIGHT
TONNAGE WIDTH HEIGHT WIDTH HEIGHT
(lbs)
PART
NUMBER
HH57118A185A2102AP
1.5
23
22¾
18⅝
21¼
36
HH58124A225A2102AP
2
27
22¾
22⅝
21¼
41
HH59130A265A2102AP
2.5
31
22¾
26⅝
21¼
44
HH59136A265A2102AP
3
31
22¾
26⅝
21¼
44
HH61148A365A2102AP
4
41
22¾
36⅝
21¼
57
HH66160A425A2102AP
5
47
22¾
42⅝
21¼
75
HE Series CASED
24
PART NUMBER
NOMINAL
TONNAGE
METERING
DEVICE
WIDTH
DEPTH
HEIGHT
YE30118E175B1205AP
1.5
Orifice
17½
21½
12½
YE30124E175B1205AP
2
Orifice
17½
21½
12½
YE30130E175B1605AP
2.5
Orifice
17½
21½
16½
YE32136E175B1605AP
3
Orifice
17½
21½
16½
YE32936E175B1605AP
1.5 - 3
TXV
17½
21½
16½
YE36960E210B2505AP
3.5 - 5
TXV
21
21½
25½
YE50960E210B2705AP
3.5 - 5
TXV
21
21½
27½
YE50960E245B2705AP
3.5 - 5
TXV
24½
21½
27½
EMBOSSED
(multi-position)
NOMINAL
TONNAGE
WIDTH
DEPTH
HEIGHT
WEIGHT
(lbs)
HE 31 1 30 C 175 B 16 22 AP**
2.5
17½”
20½”
16½”
38
HE 32 1 36 C 175 B 16 22 AP**
3
17½”
20½”
16½”
46
HE 36 1 48 C 210 B 25 22 AP**
4
21”
20½”
25½”
64
HE 50 1 60 C 245 B27 22 AP**
5.0
24½”
20½”
27½”
72
** Limited downflow applications; consult AMTS technical support.
ROOFTOP UNITS
SUNLINE™ SERIES - 3 - 6 TONS
Sunline™ Gas/Electric Rooftop Packaged Units
Available in 230/1 and 575/3
Single/Three Phase
PART
COOLING SEER
NUMBER TONNAGE
MBH
EER
ZS-03N11N
ZS-04N13N
ZS-05N13N
ZS-A6N13N
11.0
11.0
10.5
11.0
3
4
5
6
36.0
47.5
57.0
68.0
13.0
13.0
13.0
-
HEATING WEIGHT
MBH
(lbs)
OUTPUT
80
100
100
100
470
538
567
640
PREDATOR® SERIES - 6.5 - 12.5 TONS
Predator® Gas/Electric Mid-Efficiency Rooftop Packaged Units
PART
NUMBER
ZS-06N18N
ZS-07N18N
ZS-08N18N
ZS-10N24N
ZS012N24N
TONNAGE COOLING
MBH
6.5
7.5
8.5
10
12.5
78
88
101
120
150
EER
11.2
11.2
11.2
11.2
11.2
HEATING WEIGHT
MBH
(lbs)
OUTPUT
144
144
144
182
192
880
880
1020
1060
1253
Three Phase
SUNLINE™ AND SUNLINE MAGNUM™ SERIES - 15 - 25 TONS
Sunline™ Gas/Electric Rooftop Packaged Units
HEATING
MBH
% SSE WEIGHT
(lbs)
OUTPUT
PART
COOLING
NUMBER TONNAGE
MBH
EER
ZS-15N40J
15
181
11.0
240
80.0
1870
ZS-20N40J
20
259
10.0
320
80.0
2006
ZS-25N40J
25
279
10.0
240
80.0
2597
Three Phase
DIRECT GAS-FIRED INDOOR AND OUTDOOR
HEATING AND MAKE-UP AIR UNITS
Standard Features:
●● CSA/ETL Certification
●● 18 gauge galvanized steel cabinet (paint optional) with insulated
burner and blower sections
●● Outdoor units designed for roof curb or slab mounting, indoor units
designed for slab or suspension mounting.
●● Four (4) full access service doors
100% Makeup Air (MDB) Return Air Units (MRB)
25
HYDRONICS - HOT WATER TANKS
PRESTIGE™ - High-Efficiency Condensing Tankless Water Heaters
●● Up 10 94 % energy efficient with stainless steel condensing
heat exchanger.
●● Compact space saving design - about the size of a medicine cabinet.
●● Two-pipe direct vent system designed for PVC pipe (up to 38 ft. of 3”
PVC Pipe or 5 ft. of 2” PVC Pipe). See instructions for details.
●● Freeze protection to -30°F
●● Digital remote control and 10 ft. of thermostat wire included.
●● Supplied with a 120 volt power cord.
PART
NUMBER
BTU/H
FUEL TYPE
GPM AT 77°F
RISE MAX.
ENERGY
FACTOR
CRTGH-95DVLN
199,000
Natural Gas
4.9
.94
CRTGH-95DVLP
199,000
Propane
4.9
.94
CRTGH-84DVLN
157,000
Natural Gas
3.9
.94
CRTGH-84DVLP
157,000
Propane
3.9
.94
WARRANTIES
Residential
Parts Warranty: 5 Years
Labour Warranty: 1 Year
Heat Exchange Warranty:
12 Years
Commercial
Parts Warranty: 5 Years
Labour Warranty: 1 Year
Heat Exchange Warranty: 5 Years
POWER VENT
●● 0.67 EF meets ENERGY STAR®
●● Integrated system control for easy installation and service.
●● Eco-friendly burner, low NOx design.
●● Uses indoor air for combustion; blower exhausts the flue gases.
●● New whisper quiet blower.
WARRANTIES
●● Disables the heater in the presence of
8 Year limited tank and
flammable vapour accumulation.
6 Year limited parts warranty*
●● Long venting lengths up to 100 equivalent feet.
●● PVC or CPVC certified to ULC-S636 vent pipe options.
*See Residential Warranty Certificate
●● Vertical or horizontal termination.
for complete information.
FLOOR TO
CAPACITY INPUT ENERGY RECOVERY
AT
90°F
TOP
OF DRAFT JACKET
(USG)
BTU/H FACTOR
DIA.
(GPH)
HOOD
PART
NUMBER
PRO+G40S-36N-CN67-PV
40
36,000
0.67
36.4
62½”
21¾”
50
36,000
0.67
36.4
62½”
23¾”
60
55,000
0.62
55.6
69¼”
22¼”
HIGH EFFICIENCY CONDENSING POWER DV
0.80 EF exceeds ENERGY STAR®
Eco-friendly burner, low NOx design.
Low operating costs.
Use 2 or 3 inch diameter ULC S636 PVC
and CPVC.
●● Power direct vents are an ideal choice
when either indoor air quality or negative air
pressure are concerns.
●● Two-pipe system: one pipe pulls in outside
air for combustion and the other exhausts
combustion gases.
●●
●●
●●
●●
26
●●
●●
●●
●●
RVR compliant protective
Long venting lengths up to 60 feet.
Vertical or horizontal termination.
Concentric vent kit available.
WARRANTY
6 Year limited tank and parts warranty*
*See Residential Warranty Certificate
for complete information.
PART
NUMBER
CAPACITY
(USG)
INPUT
BTU/H
ENERGY
FACTOR
RECOVERY
AT 90°F
(GPH)
CNRHE40 - NAT
CNRHE50 - NAT
38
48
40,000
40,000
0.80
0.80
48.5
48.5
FLOOR TO
JACKET
TOP OF DRAFT
DIA.
HOOD
62 3/8”
71”
22 1/8”
22 1/8”
POINT-OF-USE ELECTRIC WATER HEATERS
Space saving design for installation in limited spaces.
.93 EF for 30-gallon model.
High efficiency heating element.
Automatic thermostat keeps water at desired temperature.
Over-temperature protector cuts off power in excess temperature situations.
Temperature and pressure relief valve.
Exclusive Rheemglas® tank lining resists corrosion and prolongs tank life.
Also available in 240V.
●●
●●
●●
●●
●●
●●
●●
●●
Part
Number
Capacity
(USG)
Input
Height
Diameter
PROE6-1-CN-POU
PROE10-1-CN-POU
PROE20-1-CN-POU
PROE30-1-CN53-POU
6
10
20
30
1500W / 120V
1500W / 120V
1500W / 120V
1500W / 120V
15¾”
23”
25¼”
30”
11½”
19½”
19¾”
22 1/8”
WARRANTY
1 Year parts warranty
ELECTRIC WATER HEATERS
●● Stand by watts loss 56 -97
●● Isolated tank design reduces conductive heat
loss.
●● Recovery rate is 21 gallons at a 90 degree
Fahrenheit rise”
●● Brass drain valve.
●● High performance and lower operating cost.
●● Resistored anode rod equalizes aggressive
water action and prolongs the life of the water
heater.
●● Temperature and pressure relief valve included.
●● EverKleen™ self-cleaning device fights harmful
sediment build-up with a high velocity spiraling
water stream - helps operating efficiency by
saving energy, money and improving tank life.
PART
NUMBER
CAPACITY
(USG)
INPUT
PRO+E40-M2-CN69
PRO+E60-T2-CN90
45
72
3000W / 240V
4500W / 240V
HEIGHT DIAMETER
46”
59”
21¾”
23”
WARRANTY
6 Year parts warranty with a
professional installation.
SPIDERfire ULTRA-HIGH EFFICIENCY CONDENSING COMMERCIAL HOT WATER HEATERS
WARRANTY
3 Year limited tank warranty,
upgradable to 5 years.
PART
NUMBER
GAL.
INPUT (BTU/H)
NAT. & LP
GHE80-130
GHE80-150
GHE80-200
GHE80-250
GHE80-300
GHE100-130
GHE100-160
GHE100-200
GHE100-250
GHE100-300
GHE100-350
GHE100-400
80
80
80
80
80
100
100
100
100
100
100
100
130,000
150,000
199,900
250,000
300,000
130,000
160,000
199,000
250,000
300,000
350,000
399,900
●●
●●
●●
●●
●●
●●
Up to 97% thermal efficiency.
80 and 100 gallon capacities.
130,000 - 399,900 BTU/H inputs.
Natural and LP models.
LCD diagnostic control system.
Faster, less costly venting with 2, 3 and 4
inch plastic vent pipe.
THERMAL
EFFICIENCY HEIGHT WIDTH
97%
94%
94%
92%
27%
95%
95%
95%
93%
93%
92%
92%
69 5/8”
69 5/8”
69 5/8”
69 5/8”
69 5/8”
69 5/8”
78 3/4”
78 3/4”
78 3/4”
78 3/4”
78 3/4”
78 3/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
26 1/4”
VENT
2,3,4
2,3,4
2,3,4
3,4
3,4
3,4
2,3,4
2,3,4
3,4
3,4
3,4
3,4
●● Patented heat exchanger eliminates hot
spots for better efficiency and longer life.
●● Sealed combustion system.
●● Ultra low NOx Burner.
●● Built-in side riser saves time.
●● ASME construction is available on all
models.
27
●● Defender Safety System® FVIR
technology.
●● Air Intake Louvers help clean the
combustion air.
●● Electronic Gas Control Valve
provides precise temperature control
and adjustment.
●● LED display assists in
troubleshooting.
●● Powerful Blower Motor with higher
torque, less noise, cooler operation.
●● Site Window to Combustion
Chamber for view of pilot and burner.
●● Flammable Vapour Sensor prevents
operation if flammable vapours are
detected.
●● Hydrojel® Total Performance System:
Reduces sediment build up,
Increases the first hour delivery,
Minimizes thermal stratification.
TTW®1 ENERGY SAVER MODELS
PART
NUMBER
CAPACITY
(USG)
INPUT
BTU/H
RECOVERY
AT 90°F
(GPH)
FLOOR TO
VENT
CONN.
JACKET
DIAMETER
M-1-TW40S6FBN
40
40,000
43
56½”
20”
M-1-TW50S6FBN
50
40,000
43
57½”
22”
M-1-TW60T6FBN
60
42,000
45
68”
22”
For Propane (LP) models, change suffix “BN” to “SX”
TTW®2 ENERGY SAVER MODELS
PART
NUMBER
CAPACITY
(USG)
INPUT
BTU/H
RECOVERY
AT 90°F
(GPH)
FLOOR TO
VENT
CONN.
JACKET
DIAMETER
M-2-TW65T6FBN
65
70,000
75
69”
24”
M-2-TW75T6BN
75
76,000
82
68 3/8”
26”
EverHot®HE CONDENSING TANKLESS ENERGY SAVER GAS WATER HEATER
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
28
ENERGY STAR® Qualified
Interior and Exterior models.
Digital Main Controller
Coaxial Venting - Interior Models
Continuous Flow up to 9.8 GPM.
Nine-pass Heat Exchanger.
Direct Electronic Ignition - no standing pilot.
Fully automatic controls.
Diagnostic capabilities.
Space saving installation.
Lime accumulation sensor.
PART
NUMBER
BTU/H
FUEL TYPE
GPM AT 65°F
RISE MAX.
ENERGY
FACTOR
TGHE-16OI-N
157,000
Natural Gas
4.6
0.96
TGHE-199I-N
199,000
Natural Gas
5.8
0.94
Combi™ ENERGY SAVER MODELS
Combi1™ ENERGY SAVER MODELS
PART
NUMBER
CAPACITY INPUT
(USG)
BTU/H
RECOVERY FLOOR TO
JACKET
AT 90°F
VENT
DIAMETER
(GPH)
CONN.
C-SW2-T50T10FBN
45
67,000
72
65 1/8”
22”
C-SW2-T75T10BN
72
76,000
82
68 1/8”
26”
●● Bradford White ICON System.
●● Heat Exchanger - Single wall 1½” O.D. enamel coated
(Vitraglas®) steel.
●● Provides domestic hot water and space heating in one
system
●● Low Heat Exchanger Head Loss- up to 10 GPM flow,
with less than 0.80 ft. of head loss.
●● Vitraglas® lining.
●● 1” NPT front supply and return connections.
●● 2” Non-CFC foam insulation.
●● Two protective anode rods.
●● T&P relief valve installed.
●● Low restriction brass drain valve.
●● Pedestal base.
●● Integrated Mixing Device.
●● Advanced ScreenLok® Technology flame arrestor
design.
●● Flammable vapour sensor.
●● Factory installed Hydrojet® Total Performance System.
●● Power vented.
●● Horizontal venting.
●● Vertical venting.
●● Water Connections - 3/4” NPT factory installed true
dielectric fittings.
Combi2™ TTW® ENERGY SAVER MODELS
PART
NUMBER
CAPACITY INPUT
(USG)
BTU/H
RECOVERY FLOOR TO
JACKET
AT 90°F
VENT
DIAMETER
(GPH)
CONN.
C-DW2-TW50T10FBN
45
67,000
72
65 7/8”
22”
C-DW2-TW75T10BN
72
76,000
82
68 3/8”
26”
●● Advanced ScreenLok® Technology
flame arrestor design.
●● Flammable vapour sensor.
●● Bradford White ICON System.
●● Heat Exchanger - Single wall 1½” O.D.
enamel coated (Vitraglas®) steel coil
ensures separation of potable water
and heating fluid.
●● Factory installed Hydrojet® Total
Performance System.
●● Provides domestic hot water and space
heating in one system.
●● Low Heat Exchanger Head Loss- up to
10 GPM flow, with less than 3.75 ft. of
head loss.
●● Integrated Mixing Device.
●● Water Connections - 3/4” NPT factory
installed true dielectric fittings.
●● 3/4” front supply and return
connections.
●● Vertical venting.
●● Power vented.
●● Horizontal venting.
●● 2” Non-CFC foam insulation.
●● Two protective anode rods.
●● T&P relief valve installed.
●● Low restriction brass drain valve.
●● Pedestal base.
●● Vitraglas® lining.
29
FLOWMAX COMBINATION CONDENSING TANKLESS WATER HEATERS
FLOWMAX Condensing Water Heaters with on-demand
domestic water production;
●● Are built on experience and incorporate the latest technological know-how to
produce space heating and domestic water production.
●● Use an efficient and compact design, allowing for ease of installation in both new
construction and retrofit applications.
●● Provide simplified controls and features. The units operate efficiently and are environmentally friendly.
●●Are available in different capacities and burner modulation, affording flexibility in application
and while meeting varying needs for domestic water.
●●Are designed for compatibility with a wide choice of accessories and can be used for:
domestic hot water - tankless mode or with storage tank and home heating configurations
with air handlers for space heating.
●●Comes with DIGITECH©, a brand new electronic control system. FLOWMAX condensing
water heaters can operate with multiple types of heating systems: hydronic
systems incorporating radiators, fan coils or in-floor heating, while
maintaining high efficiency levels and comfort control.
●●Include an advanced self-diagnostic system providing the user a
simple way to set and verify equipment operation on a back-lit display.
Diagnostics are easily identified through symbols.
●●Contains the exclusive MULTIPLEX© technology incorporated in the
FLOWMAX condensing water heaters ensures that the highest efficiency
levels are optimized through the use of advanced hydronic circuits.
FLOWMAX
- 90
FLOWMAX
- 120
FLOWMAX
-170
BTU/hr.
BTU/hr.
BTU/hr.
%
85304 / 30709
91091
83939 / 29788
98.4
116013 / 34121
123670
114041 / 33200
98.4
174019 / 40946
185852
170191 / 39758
98.4
°F
°F/ °C
PSI
G
77-104 / 86-167
167 / 75
30 / 4.3
1.58
77-104 / 86-167
167 / 75
30 / 4.3
1.58
77-104 / 86-167
167 / 75
30 / 4.3
1.58
°F/ °C
PSI
Gpm / Lmin
Gpm / Lmin
Gpm / Lmin
95-140 / 35-60
86 / 7.2
3.70 / 14.0
2.30 / 8.7
.65 / 2.5
95-140 / 35-60
86 / 7.2
5.3 / 20.0
3.2 / 12.1
.65 / 2.5
95-140 / 35-60
86 / 7.2
7.9 / 30.0
4.95 / 18.8
.65 / 2.5
16.15 / 11.22 / 28.74
84
16.15 / 12.60 / 28.74
88
19.3 / 18.5 / 27.56
120
Ø
Ø
Ø
3/4” / 3/4”
1/2” / 1/2”
1/2”
3/4” / 3/4”
1/2” / 1/2”
1/2”
3/4” / 3/4”
3/4” / 3/4”
3/4”
V/Hz
W
120 / 60
225
120 / 60
225
120 / 60
225
MODELS
30
Heat Input max./min.
Heat Output max.
Heat Output max./min.
Efficiency
Central Heating Circuit
Central heating water temp. settings
Max. heating working temp.
Max./Min. working pressure (heating)
Expansion Tank Capacity
Domestic Hot Water Circuit
DHW temp. settings
Max./Min. hot water working pressure
DHW flow rate at 45°F rise
DHW flow rate at 75°F rise
Flow rate minimum
Dimensions (boiler casing size)
Width / Deep / High
Weight (net)
Hydraulic Connections
Central heating flow / Return connection
Cold water / Domestic hot water mains connection
Gas connection
Electrical Specifications
Power supply
Electrical power consumption
in
LBS
HYDRONICS - POOL HEATERS
RAYPAK - POOL & SPA HEATER
Part
Number
Cabinet
●● Outdoor top - standard
●● Wind-resistant design
●● Channels rainwater out
●● Textured powder-coat finish
●● Optional indoor trap
Digital Controls
Microprocessor-controlled
Built-in diagnostics
Back-lit LCD display
Pool and spa settings
Lexan cover - with snap closure
Remote-compatible
Flame strength meter
Cycle and run time log
Transformer output monitor
Fault history - last 10
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
Burner Tray
●● Easily removable
●● Stainless steel burners
●● Brass orifices
●● Aluminized metals
●● Stainless steel heat shield
●● Spark-to-pilot ignition
●● Soft-opening gas valve
COPPER INPUT CUPRO-NICKEL
BTUH
INPUT BTUH
INDOOR
STACK DIA.
P-R206A
199,500
180,000
6”
P-R266A
266,000
240,000
7”
P-R336A
332,500
300,000
8”
P-R406A
399,000
360,000
9”
Heat Exchanger
●● Integral copper fin tube - standard
●● Automatic bypass
●● Unitherm governor
●● Polymer headers
●● Stainless steel tube sheet
●● Reversible for left-side water connections
●● ASME - optional
●● Cupro-nickel - optional
2” CPVC Connections
High Limits and Control
●● Mounted on the in/out header
Non-Combustible Base
●● Heater can be installed on a combustible surface
Base - Interior Floor
●● Stainless steel
120/240V
●● Incoming power can be connected to the right or left side
31
HYDRONICS - STORAGE TANKS
MODEL
32
STORAGE CAPACITY
PART
NUMBER
DESCRIPTION
U.S. GAL.
200-LT
Flowmax 200 Litre
Indirect Storage Tank
52
300-LT
Flowmax 300 Litre
Indirect Storage Tank
79
PLUMBING
CONNECTIONS
SHIPPING
WEIGHT
lb. (kg.)
Imp. Gal.
Litres
142ETE-9G7M
28.5
129.6
3/4” NPT
115 (52)
152ETE-9G7M
40.5
184
3/4” NPT
140 (64)
HYDRONICS - PUMPS & FITTINGS
PUMPS & VALVES
PART
NUMBER
DESCRIPTION
ALPHA 15-55F
Variable speed, cast iron c/w flanged
housing, 115V
UPS15-55SFC
1/12hp, 3 speed, stainless steel c/w
flanged housing & check valve, 115V
UPS15-58FC
1/25hp, 3 speed, cast iron c/w flanged
housing & check valve, 115V
UPS26-99BFC
1/6hp, 3 speed, bronze c/w flanged
UPS26·99FC
1/6hp, 3 speed, cast iron c/w flanged
FLANGES
PART NUMBER
DESCRIPTION
519601
3/4” Cast Iron Flange set
519651
3/4” Bronze Flange set
519652
1” Bronze Flange set
519603
1 1/4” Cast Iron Flange set
96409356
1 1/4” Bronze Flange set
519604
1 1/2” Cast Iron Flange set
PART
NUMBER
DESCRIPTION
1/25hp, single speed, bronze 3/4” sweat
housing less check valve, 115V
1/25hp, single speed cast iron c/w flanged
UP15-42F
housing less check valve, 115V
Hot Water Recirculation Pump 1/2”
UP10-16 B5/ATLC
(Sweat) c/w Timer/Aquastat
UP15-42B7
97627417
Zone Valve - 3/4” NPT c/w end switch
97627419
Zone Valve - 3/4” sweat c/w end switch
PART NUMBER
DESCRIPTION
206012
Thermostatic Mixing Valve - 1170-US-M2
-90°F to 160°F - 1/2”
274431
Relief Valve - 174A - 3/4” - NPTF
386425
Pressure Regulator 1156F - Iron - 1/2”
590715
Automatic Air Vent - FV4M1
63060
Liquid Flow Switch - FS10-C - 1”
66605
Expansion Tank ETX-15, 2.10 Gal - 1/2”
66606
66607
67431
999900
Low Water Cut-Out - OEM - 170 - 120/1/60
9D-M3-CAN
Back Flow Preventer - 1/2” dia.
9D-M2-CAN
Back Flow Preventer - 3/4” dia.
B530-2
Quick Connect 1/2” dia.
A218-2
Quick Connect 3/4” dia.
33
HYDRONICS - PEX PIPE & FITTINGS
PART
NUMBER
COLOUR
DIMENSION DIMENSION
COILS
NOMINAL
O.D.
PEXPB-08-50
PEXPR-08-50
PEXPR-08-100
PEXPB-08-250
PEXPR-08-250
PEXPB-08-300
PEXPR-08-300
PEXPB-08-500
PEXPR-08-500
PEXPB-08-1000
PEXPR-08-1000
PEXPB-12-100
PEXPR-12-100
PEXPB-12-250
Blue
Red
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.875
.875
.875
50’
50’
100’
250’
250’
300’
300’
500’
500’
1000’
1000’
100’
100’
250’
PEXPR-12-250
PEXPB-12-300
PEXPR-12-300
PEXPB-12-500
PEXPR-12-500
PEXPB-12-1000
PEXPR-12-1000
PEXPW-16-100
PEXPW-16-300
PEXPW-15-500
Red
Blue
Red
Blue
Red
Blue
Red
White
White
White
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
1”
1”
1”
.875
.875
.875
.875
.875
.875
.875
1.125
1.125
1.125
250’
300’
300’
500’
500’
1000’
1000’
100’
300’
500’
Bow SUPERPEX
tubing is manufactured for use in hot and
cold potable water distribution including
industrial, commercial, high-rise and multifamily residential facilities.
Superpex is made in 3/8”, 1/2”, 3/4”, 1” and
1¼-inch nominal sizes.
PEX OXYGEN BARRIER TUBING
BOW OXYPEX is oxygen barrier tubing manufactured to NSF
14, ASTM F876/F877 and CSA Standard B137.5 designed for
use in hydronic heating and hydronic radiant closed loop heating
applications.
PART
NUMBER
34
PEXP-OXY-08-100
PEXP-OXY-08-250
PEXP-OXY-08-300
PEXP-OXY-08-500
PEXP-OXY-08-1000
PEXP-OXY-08-1200
PEXP-OXY-10-300
PEXP-OXY-10-500
PEXP-OXY-12-100
PEXP-OXY-12-250
PEXP-OXY-12-300
PEXP-OXY-12-500
PEXP-OXY-12-1000
PEXP-OXY-16-100
DIMENSION DIMENSION
COILS
NOMINAL
O.D.
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
3/4”
3/4”
1”
.625
.625
.625
.625
.625
.625
.750
.750
.875
.875
.875
.875
.875
1.125
100’
250’
300’
500’
1000’
1200’
300’
500’
100’
250’
300’
500’
1000’
100’
CSA B137.5
NSF 61 & 14
DIN 4726
100 PSI @ 82°C (180°F)
160 PSI @ 23°C (73°F)
HYDRONICS - PEX PIPE & FITTINGS
PART
NUMBER
DESCRIPTION
PEXTB-08
Pex Brass Tee BBB 1/2”
PEXTB-12
Pex Brass Tee BBB 3/4”
PEXTB-12-12-08
Pex Brass Tee BBB 3/4” x 3/4” x 1/2”
PEXC-08
Pex Coupling BB 1/2”
PEXC-12
Pex Coupling BB 3/4”
PEXE-08
Pex Brass 90 Elbow BB 1/2”
PEXE-12
Pex Brass 90 Elbow BB 3/4”
PART
NUMBER
DESCRIPTION
PEXSADF-08
Pex Brass Sweat ADPT B-HUB 1/2”
PEXSADF-12
Pex Brass Sweat ADPT B-HUB 3/4”
PEXSADM-12-08
Pex Sweat ADPT B-FIT Brass 3/4” x 1/2”
PEXFA-08
Pex Brass Female ADPT B-FPT 1/2”
PEXFA-12
Pex Brass Female ADPT B-FPT 3/4”
PEXMA-08
Pex Brass Male ADPT B-MPT 1/2”
PEXMA-12
Pex Brass Male ADPT B-MPT 3/4”
CRIMP RINGS
PART
NUMBER
DESCRIPTION
PEXCR-08
Pex Crimp Ring, Blk 1/2”
PEXCR-12
Pex Crimp Ring, Blk 3/4”
PEXCR-16
Pex Crimp Ring, Blk 1”
PEXCR-SS-08
Pex Crimp Ring, Stainless Steel 1/2”
PEXCR-SS-12
Pex Crimp Ring, Stainless Steel 3/4”
PEXCT-08
Pex Crimp Tool 1/2”
PEXCT-12
Pex Crimp Tool 3/4”
35
HYDRONICS - RADIANT HEATING
PEX OXYGEN BARRIER TUBING
PART
NUMBER
●● RAUPEX O2 barrier pipe is manufactured using
REHAU® - high-pressure peroxide method for
crosslinked polyethylene (PEXa).
●● Meets or exceeds the requirements of ASTM F876,
F877, CSA B137.5 and PPI TR-3.
●● Complies with the requirements of the CSA B214
installation code for hydronic heating systems.
DESCRIPTION
136031-150
1/2” RAUPEX O2 Barrier Pipe,
136031-300
136031-000
136880-400
136880-000
136051-100
136051-300
136051-500
150 ft. coil (30.5 m)
300 ft. coil (91.4 m)
1000 ft. coil (304.8 m)
400 ft. coil (121.8 m)
1000 ft. coil (304.8 m)
100 ft. coil (30.5 m)
300 ft. coil (91.4 m)
500 ft. coil (152.4 m)
PVC BEND GUIDES
Create 90° bends without an elbow fitting by inserting RAUPEX
pipe into these rigid plastic PVC bend guides. PVC bend guides
proved protection at slab penetrations and create a professional
appearance at manifolds.
PART
NUMBER
DESCRIPTION
266170
3/8” and 1/2” PVC Bend Guide
266175
5/8” and 3/4” PVC Bend Guide
266180
1” PVC Bend Guide
PART
NUMBER
NO. OF
LENGTH “in” (cm)
OUTLETS
PRO-BALANCE - 1 in. Brass Manifold with Gauges
Each manifold comes complete with:
●● Visual flow gauges (GPM) for each circuit on supply side; flow
●●
●●
●●
●●
●●
●●
36
●●
gauges have internal polymer “cages” to prevent build-up of
debris, can be used for individual circuit isolation and have an
accuracy of +/- 10%
Circuit balancing/isolation valves on return side.
Two 1 in. NPT supply and return manifold isolation valves with
thermometer housings, two mini thermometers included.
Two air vent/boiler drain valves with manual air vent and
3/4 in. GHT hose
connection.
Four drywall screws
and four self-tapping
screws for mounting.
Manifold circuit chart.
Vent key and key
holder.
Product instructions.
240021-100
2
7.48” (19.0)
240031-100
3
9.65” (24.5)
240041-100
4
11.81” (30.0)
240051-100
5
13.98” (35.5)
240061-100
6
16.14” (41.0)
240071-100
7
18.31” (46.5)
240081-100
8
20.47” (52.0)
240091-100
9
22.64” (57.5)
240101-100
10
24.80” (63.0)
240111-100
11
26.97” (68.5)
240121-100
12
29.13 (74.0)
PRO-BALANCE - Brass Manifolds Accessories
PART
NUMBER
DESCRIPTION
261007-101
1/2” RAUPEX x R-20 Brass Manifold Outlet
267557-101
267007-101
250212
Automatic Air Vent 3/8” BSPP
260407
1” BSPP Unions w/Gaskets
250209-C
R-20 Brass Circuit Outlet Cap w/Gasket
250214
1” BSPP 90° Angle Piece w/Gasket
REHAU® RADIANT HEATING SYSTEMS - RAUPLATE™ Heat Transfer Plates
RAUPLATE™ heat transfer plates are designed with two pipe channels 8 in. on-center.
RAUPLATE™ is screwed to the underside of the subfloor In the joist space and
RAUPEX pipe snaps into the plates for a convenient installation.
PART NUMBER
DESCRIPTION
298926-001
RAUPLATE™ Heat Transfer Plate
for 1/2” RAUPEX
NOMINAL LENGTH
M
ft.
1.2
4
REHAU® RADIANT HEATING SYSTEMS - Heat Transfer Plates, Heavy Gauge
These extruded aluminum heat transfer plates are used in joist space
installations to maximize heat transfer and improve efficiency. The
unique design allows the heat transfer plates to be screwed into the
joist space and RAUPEX pipe to snap into the plates for convenient
installation. Plates are 3.5” x 48” (8.9 x 121.9 cm) with pre-drilled 1/8”
holes for ease of installation.
PART NUMBER
DESCRIPTION
235962
Heat Transfer Plate, Heavy Gauge for 3/8” RAUPEX
235972
Heat Transfer Plate, Heavy Gauge for 1/2” RAUPEX
REHAU® RADIANT HEATING SYSTEMS - Heat Transfer Plates, Light Gauge
Aluminum heat transfer plates are used in joist space installations to
enhance heat transfer and improve efficiency. RAUPEX pipes snap into
plates for convenient installation. Plates are 5” x 24” (12.7 x 61 cm) with
roll-formed edges to increase rigidity and safety.
PART NUMBER
DESCRIPTION
270701
Heat Transfer Plate, Light Gauge for 1/2” RAUPEX
37
RAUPANEL™ HIGH-PERFORMANCE RADIANT HEATING SYSTEMS
PART
NUMBER
DESCRIPTION
235307
RAUPANEL™ (6ft. lengths)
235327-PLY
6” Plywood Return Bend (4 returns)
235337-PLY
8” Plywood Return Bend (3 returns)
235377-PLY
2” Plywood Furring Strip
Furring strips are to be used in conjunction with 8” return bends
to facilitate proper spacing of RAUPANEL and to proved a nailing
surface for the floor covering. Reference the table below for product
dimensions and square footage. Be sure to read the RAUPANEL
System Installation Guide (855.625) for instructions on design and use
of this product. RAUPANEL is 5/8” thick.
TABLE OF DIMENSIONS
Dimensions
WxLxH
ft2/pc
ft2/pkg
M2/pc
M2/pkg
235307
6” x 72” x 0.625”
3.0
48.0
0.279
4.459
235327-PLY
8” x 48” x 0.626”
2.7
21.3
0.251
1.979
235337-PLY
9” x 48” x 0.625”
3.0
24.0
0.279
2.230
235377-PLY
2” x 48” x 0.625”
0.7
22.7
0.065
2.110
PART NUMBER
RAUBOARD™ RADIANT HEATING SYSTEMS
38
PART NUMBER
DESCRIPTION
298896-001
Double Groove
298796-001
Single Groove
298396-001
Return Groove
Low profile heat transfer panels overlay the subfloor and are designed with two pipe grooves 6” on-center.
Panels are screwed to the subfloor and RAUPEX pipe snaps into the groove for a convenient installation. A
small bead of silicone is applied to the groove before installing the pipe. Low profile panels are 1/2” thick.
DELHI FANS
200 SERIES - Forward Curved Inline Duct Blowers
Features:
●● An economical and efficient all purpose inline duct blower for indoor use with
heating, cooling and ventilating systems.
●● Quiet forward curved blowers operate at low RPM.
●● Heavy duty ball bearings suitable for -65°F to +250°F.
●● Access panels for convenient motor and drive installation and servicing from
either side.
●● All models have keywayed shafts on both ends for CW or CCW drive.
●● Platform motor mounting allows models 207 to 218, single and twin units, to
be used in up-flow, down-flow and horizontal discharge positions.
●● All twin units use a common shaft for balanced air supply by each blower.
762
HVAC PRODUC S
705
Typical Maximum CFM @SP
MODEL
1/2” SP
1” SP
1 1/2” SP
2” SP
2 1/2” SP
Min HP
Max HP
Shaft Dia.
207
1400
1250
1100
900
700
1/6
3/4
¾”
209
1800
1600
1400
1100
800
1/6
3/4
¾”
9209
2400
2300
2100
1900
1700
1/6
1 1/2
¾”
210
2900
2700
2500
2100
1700
1/6
1 1/2
¾”
9210
2900
2700
2500
2100
1700
1/6
1 1/2
¾”
212
3600
3200
2800
2300
1800
1/6
1 1/2
¾”
9212
4300
4300
4100
3800
3500
1/6
3
1
215
5700
5200
4600
4000
3400
1/3
3
1
9215
6200
6200
6200
5700
5200
1/3
5
1
218 & 9218
9000
8250
7500
6700
5750
1/2
5
1
9220
13000
13000
13000
13000
13000
3/4
15
1-7/16”
300 SERIES - Forward Curved Roof Exhausters
Features:
●● An economical and efficient general purpose roof exhauster for use
in schools, hospitals, high rise apartments, commercial and industrial
applications.
●● Low operating RPM of forward curved blowers results in low noise levels.
●● Quiet operation. Blower is mounted on heavy steel angle with rubber insulators.
●● Automatic gravity back draft damper and bird screen are included.
●● Cabinet insulated with 1/2” fiberglass.
●● Blower equipped with ball bearings suitable for operation in ambient temperatures
of -65°F to +250°F.
●● Easy servicing - bower, motor and drives are accessible through the convenient removable top.
HVAC PRODUC S
MODEL
1/2” SP
1” SP
1 1/2” SP
2” SP
2 1/2” SP
Min HP
Max HP
Shaft Dia.
307
1200
1100
900
700
500
1/4
3/4
¾”
309
1800
1600
1300
1000
700
1/4
1 1/2
¾”
310
2800
2500
2200
2000
1600
1/4
1 1/2
¾”
312
3700
3300
2900
2500
1700
1/4
2
¾”
315
5700
5200
4600
4100
3400
1/2
3
1
318
8800
8000
7200
6600
5800
1/2
5
1
39
DELHI FANS
400 SERIES - FC Exhauster Belt Drive Utility Blower
Features:
●● Universal frame allows for choice of discharge position.
●● Multiple choice for motor mounting location with each
discharge position.
HVAC PRODUC S
●● Motor mounting bracket and hardware included with
models 407 to 415.
●● Motor mounting bracket/plate assembly and hardware are supplied with model 418.
●● Heavy duty ball bearings suitable for -65°F to +250°F on all models.
●● Spider bearing brackets on models 407 to 418.
●● Pillow block bearings with T bar support, on models 420, 422 & 425.
●● Shafts for 420, 422 & 425 models are keywayed for wheels and pulleys (407 to 418
for pulleys only).
MODEL
1/2” SP
1” SP
1 1/2” SP
2” SP
2 1/2” SP
Max HP
Wheel
Dia.
Wheel
Width
407
1000
900
800
700
500
1
8-1/16”
4-15/16”
409
2100
2000
1900
1850
1750
2
9-13/16”
7-3/16”
410
2600
2400
2300
2150
2050
2
11-1/8”
7-3/16”
412
3250
3000
2850
2700
2600
2
12-7/8”
7-3/16”
415
5260
4850
4500
4150
3550
3
15-1/2”
9-9/16”
418
6700
6300
5950
5550
5200
5
18-1/2”
10-13/16”
420
9300
8850
8500
8000
7700
7 1/2
20-7/16”
10-1/4”
422
10300
9750
9200
8600
8000
7 1/2
22-1/8”
11-1/4”
425
14300
13400
12550
11850
11400
10
25-1/4”
13”
600 SERIES - FC Exhauster Belt Drive Utility Blower
Features:
●● Standard top horizontal discharge position can
easily be field rotated to any of 8 positions.
●● Outlet flanges on models 620, 622 & 625.
HVAC PRODUC S
●● Vented motor and drive compartment cover, with
handles, for safety and weather protection.
●● Available in CW or CCW rotation.
●● Shafts for 620, 622 & 625 models are keywayed for wheels and pulleys
(610 to 618 models for pulleys only).
●● Heavy duty pillow block ball bearings.
40
Min
HP
Max HP
Wheel
Dia.
Wheel
Width
1/6
2
2600
1/3
2
12-7/8”
7-3/16”
4150
3550
1/3
3
15-1/2”
9-9/16”
5950
5550
5200
1/2
5
18-1/2”
10-13/16”
8850
8500
8000
7700
1/2
7 1/2
20-7/16”
10-1/4”
10300
9750
9200
8600
8000
1/2
7 1/2
22-1/8”
11-1/4”
14300
13400
12550
11850
11400
1
10
25-1/4”
13”
MODEL
1/2” SP
1” SP
1 1/2” SP
2” SP
2 1/2” SP
610
2600
2400
2300
2150
2050
612
3250
3000
2850
2700
615
5260
4850
4500
618
6700
6300
620
9300
622
625
11-1/8”
7-3/16”
DELHI FANS
700 SERIES - Filtered Fresh Air Supply Units
●● Outside air flows over the motor to
increase motor life.
●● Heavy duty ball bearings suitable for -65° to +250° F.
●● Top insulated with 1/2” fiberglass flexible
●● Latched top cover provides convenient service
Features:
duct liner.
access to 4 filters, motor and drive.
●● Flexible forward curved belt drive blowers operate at ●● Adaptable to heating or cooling coils for
1 1/2”
2 1/2”
Min
MODEL 1/2” SP 1” SP
2” SP
SP
SP
HP
709
710
712
715
718
2600
3200
4400
5800
8800
2500
2900
4000
5400
8200
2300
2600
3600
4600
7400
2100
2300
3100
4000
6800
HVAC PRODUC S
applications requiring tempered air.
●● Motor mounting hardware
supplied with all units.
low speed and noise levels.
●● Blower is rubber mounted for quiet operation.
●● Four permanent, washable, aluminum filters have
large surface area for efficient filtration.
1800
2000
2600
3400
6000
Max HP
1/6
1/6
1/6
1/6
1/6
1 1/2
1 1/2
2
3
5
Shaft
Dia.
3/4”
3/4”
3/4”
1”
1”
‘BI’ SERIES - Standard Non-Overloading, Backward Inclined Utility Blower
Features:
BI-RM Utility Blower - Restaurant Model
●● Heavy duty ball bearings suitable for
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
-65° to +250° F.
Full AMCA Class I operation
Complete range of sizes from 10”
to 36”
Vented motor and drive
compartment cover, with handles, for
safety and weather protection
16 gauge or heavier blower housing
High solids enamel corrosion
resistant paint finish
Motor access from 3 sides
Available in CCW or CW rotation
Sloped, motor base makes motor mounting a simple task
Outlet flanges on sizes BI-24 to BI-36
Non-overloading backward inclined (BI) welded wheels
Aluminum wheel - (AMCA type B classification for spark resistant
construction) - available as an option
Temperature Ratings - without a heat slinger - 250°F; with a heat
slinger, steel wheel - 400°F, aluminum wheel - 300°F
Heavy duty pillow block ball bearings
Standard position can easily be field rotated to any of 8 discharge
positions
HVAC PRODUC S
Features:
●● UL 762 listed for
removal of cooking vapours.
●● Meets NFPA 96 guidelines.
●● Upblast discharge directs exhaust away from roof.
●● Integral handles for single person removal of motor and drive
●●
●●
●●
●●
●●
compartment cover.
Continuously welded 16 gauge or heavier blower housing.
Bolted clean out door.
2” drain for easy removal of cleaning solutions.
Complete range of sizes from 10” to 36”.
Vinyl shaft seal
MODEL
1” SP
2” SP
3” SP
4” SP
5” SP
BI-10/ BI-10RM
BI-12/ BI-12RM
BI-13/ BI-13RM
BI-15/ BI-15RM
BI-16/ BI-16RM
BI-18/ BI-18RM
BI-20/ BI-20RM
BI-22/ BI-22RM
BI-24/ BI-24RM
BI-27/ BI-27RM
2300
3300
4000
4900
5800
7300
8500
10000
13000
16000
2100
3000
3700
4600
5400
6800
8000
9700
12000
15000
1700
2700
3400
4300
4900
6200
7200
9100
11000
14000
1500
2400
3000
3700
4300
5600
6500
7900
10000
12500
1300
2000
2600
3400
3700
4700
5200
6700
8000
11000
Min
HP
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1 1/2
1 1/2
Max HP
Wheel Dia.
2
3
5
5
7 1/2
7 1/2
7 1/2
10
15
15
3/4”
1”
1”
1”
1-3/16”
1-3/16”
1-3/16”
1-3/16”
1-7/16”
1-7/16”
41
SUPPLY/EXHAUST FANS
MODEL DB - Downblast Belt Drive Centrifugal Roof Exhauster
Features:
●●
●●
●●
●●
●●
●●
●●
Exhaust air up to 28,000 CFM in high static pressure applications up to 1-1/4” w.g.
Sizes 6 to 48
Attractive spun aluminum exterior.
Belt drives permit easy performance adjustments when needed.
Non-overloading backward inclined wheel for efficiency at higher static pressures.
AMCA Air and Sound Licensed.
cULus 705 Listed.
Application Construction Options
MODEL NAME
TYPICAL APPLICATIONS
DB
Removal of clean air in general applications
MODEL RED - Downblast Direct Drive Centrifugal Roof Exhauster
Features:
●●
●●
●●
●●
●●
●●
●●
Exhaust air up to 3,000 CFM in high static pressure applications up to 1” w.g.
Sizes 6 to 15
Attractive spun aluminum exterior.
Direct drive units have low sound levels and quiet operation
Non-overloading backward inclined wheel for efficiency at higher static pressures.
AMCA Air and Sound Licensed.
cULus 705 Listed.
MODEL TXD - Upblast Direct Drive Centrifugal Roof Exhauster
Features:
●● Exhaust air up to 3,400 CFM in high static pressure
applications up to 1-1/4” w.g.
●● Sizes 6 to 15.
●● Attractive spun aluminum exterior.
●● Direct drive units have low sound levels and
MODEL NAME
quiet operation.
TXD
Removal of clean or contaminated air in general applications
●● Non-overloading backward inclined wheel
for efficiency at higher static pressures.
TXDRHUL
UL762 listed for grease removal
●● Roof or sidewall mounting options.
TXDW
Wall mount version of TXD
●● AMCA Air and Sound Licensed.
TXDWRHUL
UL762 version of TXDW
●● cULus 705 or 762 Listed.
MODEL TXB - Upblast Belt Drive
Centrifugal Roof Exhauster
Features:
42
MODEL
NAME
Removal of clean or contaminated air
TXB
●● Exhaust air up to 35,000 CFM in high static pressure applications
in general applications
up to 3-1/4” w.g.
TXBRHUL
UL762 listed for grease removal
●● Sizes 8 to 48
TXBHP
High pressure version of TXB
●● Attractive spun aluminum exterior.
●● Belt drives permit easy performance adjustments when needed.
txbhp-rhUL UL762 high pressure version of TXB
●● Non-overloading backward inclined wheel for efficiency at higher
TXBW
Wall mount version of TXB
static pressures.
●● Roof or sidewall mounting options.
TXBWRHUL
UL762 version of TXBW
●● AMCA Air and Sound Licensed.
TXBWHP
High pressure version of TXBW
●● cULus 705 or 762 Listed.
UL762 High pressure version of
●● NFPA - suitable for National Fire Protection Association
TXBWHPRHUL
TXBW
Installations.
SUPPLY/EXHAUST FANS
MODEL RDD - Direct Drive Tubeaxial Fans
Features:
●● Housing construction of heavy
gauge steel.
●● 12” through 40” Airfoil cast
aluminum propeller blade.
●● Ranging from 800 to 44,000 CFM
●● Static pressure 0 to 3” SP.
●● Motor sizes are 1/4 to 30 HP depending on propeller size and CFM desired.
●● The RDD is a direct drive fan with motor in the airstream.
MODEL RBD - Belt Driven Tubeaxial Fans
Features:
●● Housing construction of heavy
gauge steel.
●● 12” through 48” Airfoil cast
aluminum propeller blade.
●● Ranging from 1300 to 70,000 CFM
●● Static pressure 0 to 3” SP.
●● Motor sizes are 1/4 to 50 HP depending on propeller size and CFM desired.
●● The RBD is a belt drive fan with motor and drives out of the airstream.
PROPELLER FAN “BE” SERIES - Enclosed Belt Driven Wall Exhaust Fan
These low pressure belt driven fans are ideally suited for
ventilation of underground garages of apartment buildings,
warehouses, public buildings, greenhouses etc.
Features:
●● The frame features aVenturi orifice.
●● Sturdy welded construction appropriate for industrial, commercial and
agricultural applications.
●● Fan panels are heavy gauge steel with die formed edges.
●● The propeller blades are made of heavy gauge steel and are statically
balanced.
●● Belt drive engineered to 50% overload.
●● Motor mounting plates are adjustable to obtain proper belt tension.
●● Motors are heavy duty ball bearing type, carefully matched to the load.
●● Cabinet constructed of heavy duty 18 gauge enamel finish satin coat or
galvanized steel.
●● Shutter blades are made of heavy gauge extruded aluminum, then stripped
with neoprene gasket to ensure an airtight seal.
●● Rear guard made of finger proof expanded metal. Also includes a centre
access door for easy serviceability.
24” through 72”
Capacities: 1000 to 60,000 C.F.M.
PROPELLER FAN “A” SERIES - Direct Drive, Wall Exhaust Fan
These direct drive fans are specially designed for the rapid removal of smoke,
steam, heat and fumes and for general ventilation of most commercial and industrial
buildings. The fans are most practical for use at static pressures below 0.25” w.g.
Features:
●● The blades are die stamped and die
formed to assure balance.
●● Guard as shown is standard.
●● Totally enclosed, one, two or variable
speed motor.
●● Non overloading characteristics.
●● Attractive enamel finish
●● Vertical or horizontal installation.
●● Self acting, extruded aluminum blade
shutters.
●● Frames are build with steel panel,
incorporating mounting flanges and
Venturi orifice.
8” through 24”
Capacities from
200 to 4300 C.F.M.
43
VENTILATION FANS
IN-LINE FANS
CK - Circular Inline Duct Fan
Features:
●● CK Series fans feature a limited 10 year warranty.
●● Fans are supplied with factory installed electrical cords.
●● CK fans are quiet, powerful, high capacity, compact fan
systems.
●● CK fans are designed for the most demanding applications.
●● Designed for high static pressure applications including:
carbon filters and long, complicated duct runs.
●● Fan speed may be infinitely varied with optional speed
controls.
●● CK Series fans are UL Listed for use in the U.S.A. and Canada.
Features:
PART #
CFM
AIRFLOW
DUCT
SIZE
CK4A
CK4C
CK5C
CK6B
CK6C
CK8B
CK10C
CK12C
120
190
260
280
605
650
730
995
4”
4”
5”
6”
6”
8”
10”
12”
●● Ideal for ventilating larger rooms or multiple areas.
●● High quality external rotor motor features long life expectancy and quiet
operation.
●● Backward inclined centrifugal fan for strong air delivery with minimal
noise.
●● Removable panel offers easy access to the electrical connections.
●● Easy mounting to rafters or joists.
●● High pressure centrifugal blowers easily accommodate long duct runs.
●● Suitable for intermittent or continuous ventilation.
PART
NUMBER
CFM AT
0.1” SP
CFM AT
0.1” SP
AMPS
51.9
0.37
ILF130
130
61.3
ILF250
250
ILF360
ILF530
ILF120
ENERGY
STAR
WEIGHT
(lbs.)
DUCT
SIZE
0.37
YES
6.0
5”
117.9
0.80
YES
8.0
6”
360
169.8
0.87
YES
10.0
8”
530
250.0
2.00
NO
13.0
10”
110
NO
6.0
4”
RI SERIES - General Purpose Inline Exhaust Fans
Features:
●● Engineered to provide effective and reliable operation, making it
perfect for general purpose inline ventilation.
●● Low profile construction for ease of installation in confined spaces.
●● High efficiency motor. Available for 4”, 5”, 6”, 8”, 10” and 12” duct
sizes.
●● Suitable for use in high-rise condominiums, office buildings,
schools, boardrooms or where high volume, quiet ventilation is
required.
CUBIC FEET PER MINUTE AT STATIC PRESSURE
44
PART
NUMBER
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
1.00
RI-150
156
148
140
132
125
112
101
94
88
-
-
RI-200
RI-250
RI-500
RI-700
RI-900
RI-1200
214
252
434
752
875
1154
198
227
402
719
830
1107
186
208
362
698
786
1054
171
194
322
675
750
1006
159
180
292
650
700
953
146
165
270
629
659
901
133
150
245
605
632
857
121
133
222
577
605
794
109
120
200
550
581
725
97
108
180
525
553
648
93
160
500
525
592
VENTILATION FANS
BATH / VENTILATION FANS
Features:
●● Energy Star qualified performance and nearly silent operation.
●● Plug-in permanently lubricated motor - engineered for continuous operation.
●● cUL and UL Listed for use over bathtubs and showers when connected to a GFCI
protected branch circuit.
●● Resilient anti-vibration motor mounts.
●● Dynamically balanced centrifugal blower wheel for quiet, efficient performance.
●● 6” round duct connector.
●● Includes unique spacers (patent pending) for mounting to engineered “I” joists.
●● Suitable for 2” x 8” constructions.
●● Power Rating: 120/60.
PART
NUMBER
FUNCTION
CFM AT 0.1”
SP
CFM AT 0.25”
SP
SONES AT
0.1” SP
WATTS AT
0.1” SP
SHIPPING
WEIGHT
(lbs.)
QTXE050C
Fan
50
39
<0.3
19.7
13.2
QTXE090C
Fan
90
68
0.6
26.4
13.2
QTXE110C
Fan
110
90
0.9
33.5
12.8
QTXE150C
Fan
150
118
1.4
51.3
13.2
QTXE110H
Sensing
110
90
0.7
33.5
12.8
Features:
●● UL Listed for use over bathtubs and showers when connected to a GFCI protected
branch circuit.
●● Housing Dimensions: 8 1/16” x 7 3/8” x 3 7/8”
●● Fits 2” x 4”, 2” x 6” and 2” x 8” constructions.
●● Torsion spring grille mounting means no tools are required to install grille.
●● 3” round duct connector.
PART
NUMBER
CFM AT
0.1” SP
SONES AT
0.1” SP
POWER
RATING
AMPS
SHIPPING
WEIGHT
(lbs.)
696NC
50
3.0
120/60
1.1
3.6
695CB
70
4.5
120/60
1.5
4.1
Features:
●●
●●
●●
●●
●●
●●
●●
●●
Rugged steel housing with mounting ears.
4” round duct connector.
Low-profile grille design suits any decor.
Torsion spring grille mounting means no tools are required to install grille.
Mounts between joist or directly to framing members.
Housing Dimension: 8 1/4” x 8” x 5 3/4”
Suitable for 2” x 6” and 2” x 8” constructions.
Power Rating: 120/60.
PART NUMBER
FUNCTION
CFM AT 0.1” SP
SONES AT 0.1”
SP
AMPS
SHIPPING
WEIGHT
(lbs.)
671SP
Fan
90
2.5
0.5
6.0
672SP
Fan
110
4.0
1.0
6.3
45
VENTILATION FANS
Features:
●● Quiettest fans provide powerful, quiet ventilation for large bathrooms, reception
rooms, offices and conference rooms up to 375 sq. ft.
●● Rounded, low-profile white polymeric grilles add distinction to your room.
●● Housing Dimensions: 14 1/4” x 10” x 9”
●● Vents horizontally or vertically with 3 1/4” x 10” duct.
●● Suitable for use with solid state speed control (sold separately).
●● Includes pre-wired outlet boxes with plug-in receptacles for easy installation.
PART
NUMBER
CFM AT
0.1” SP
SONES AT
0.1” SP
POWER
RATING
AMPS
QT200
200
2.0
120/60
1.0
QT300
300
4.5
120/60
2.5
PART
NUMBER
MOTOR
120 VAC 60 Hz
EB50
RS90
CF-170
QB-80
QCF80ES
QCF110ES
QK130ES
QK150ES
QK180ES
SHIPPING
WEIGHT
(lbs.)
DUCT
SIZE
17.0
3¼” x 10”
20.0
3¼” x 10”
CUBIC FEET PER MINUTE
RPM
AMPS
S.P.
0.00
0.10
0.20
0.30
2000
1500
1400
1000
800
1200
1000
800
950
1.00
0.50
0.7
0.35
0.20
0.3
0.30
0.30
0.40
CFM
CFM
CFM
CFM
CFM
CFM
CFM
CFM
CFM
65
96
158
77
100
120
136
148
203
60
93
144
69
87
111
127
138
188
57
88
129
60
77
101
119
128
172
54
74
111
45
69
87
110
118
157
QB
ROOF CAPS
Model 437
●● High capacity design - up to 1200
CFM (566.3 L/s).
●● 24 GA, CRCQ steel, black
electrically-bonded epoxy finish.
●● Built-in spring-loaded back draft
damper and bird screen.
●● For use with high performance
blower system.
Model 634
●● 24 GA, CRCQ steel, black
electrically-bonded epoxy finish.
●● Built-in spring-loaded back draft
damper and bird screen.
●● For 3 1/4” x 10” (82.6 mm x 254
mm) or up to 8” (203.2 mm) round
duct.
Model 634M
●● Same as Model 634 except with 6”
(152.4 mm) round
duct collar.
POWERED ATTIC VENTILATOR
●● Precision balanced 14” (356 mm) metal blade for maximum air-flow, minimum
sound level.
●● ABS plastic dome provides ultraviolet protection and superior durability.
●● Thick metal flashing - allows for nailing and hot tar application.
●● Mesh bird screen.
●● Built-in adjustable thermostat - for automatic operation at your chosen
temperature level.
●● Thermally protected motor.
46
MODEL
CFM
HP
AMPS
HEIGHT
DOME DIA.
RPM
VOLTS
RMPAV1200
1200
1/10
3.2
7⅞”
23 3/16”
1100
120
SANUVOX
ULTRAVIOLET AIR TREATMENT SYSTEMS
P900-GX PORTABLE
Features:
Eradicates bacteria, viruses and mold.
Destroys chemical and biological odors.
Sanuvox’s patented system in a portable UV Air Purifier weighing 11 Ibs.
High Intensity 19 mm UVC/UVV Quartz Lamp.
9 electronically controlled speeds.
Touch-Pad Digital Controls with Count-Down TImer.
Most effective Air Purification System for those who do not have a forced air
system or require a portable room unit.
●● Purify up to 900 square feet.
●● Easily wall mountable. Integrated stand and handle included.
●● 3 year warranty on parts including UV Lamp.
●●
●●
●●
●●
●●
●●
●●
S1000FX-GX COMMERCIAL I INDUSTRIAL
Features:
●● Eradicates biological contaminants such as mold,
bacteria, viruses, germs and allergens.
●● Destroys chemical and biological odors.
●● Stand-Alone, ducted to multiple rooms, or by-pass
installation options.
●● Two 1” pre-filters and one 4” 95% ASHRAE pleated
filter.
●● Clean Room Option: HEPA filter capturing particles
down to 0.3 µm, additional UVC ‘J’ Lamp & ballast.
●● 1750 CFM blower. Under filter load, 1000 CFM.
●● Patented 30” 19 mm Pure Fused Quartz UVC/UVV
‘J’ Lamp.
●● High-Output Ballast.
●● Optional motor speed control.
●● Optional VOC kit.
●● Warranty: Lamp 12,000 HRS, Motor 1 YR.,
Ballast 3 YRS.
47
SANUVOX
SABER GENIUS 24/1 IOV - UV COIL-CLEAN SYSTEM
16” UVC Germicidal Coil Cleaner:
Destroys mold & their associated odors on the coil.
Improve energy efficiency.
24V & 110V with included step-down transformer.
Intelligent Voltage Protection (lVP): protects the A/C system
from electrical overload
●● I year warranty including UV Lamp
●● ETL Approved
●●
●●
●●
●●
3” LCD Back-Lit Display provides:
●●
●●
●●
●●
●●
●●
Real Time system status
‘Days Left until UV Lamp replacement (I year).
Countdown purifier animation.
‘Lamp Out’ & ‘Ballast Out’ visual alarm.
‘Contractor Call-Back’ indicator.
Intelligent Voltage Protection indicator.
SANUVOX ’R’ SERIES - IN-DUCT UV AIR TREATMENT SYSTEM
SR + Model Features:
●● Treats up to 2,000 sq. ft.
●● 110/220V operation.
●● Multi-color LED Status Display provides important user
information.
●● UV Chamber rotates for up-flow or down-flow systems.
●● 3 year warranty including UV Lamp.
●● Optional duct board kit available.
R + Model Features:
●●
●●
●●
●●
●●
●●
48
Treats up to 4,000 sq. ft.
Intelligent ballast automatically switches from 110V to 220V.
3” LCD DIsplay provides important user information.
UV Chamber rotates 360 degrees for vertical or horizontal systems.
3 year replacement warranty including UV Lamp.
Duct board kit included.
FILTERS
PLEATED AIR FILTERS
●● The Aerostar Series 400 pleated air filter utilizes a state-of-the-art
100% synthetic media to achieve exceptionally high levels of efficiency
with the lowest resistance to air flow available.
●● low resistance improves air flow and can greatly reduce energy costs.
PART NUMBER
DESCRIPTION
DFP16201
Disposable Pleated Filter 16” x 20” x 1”
DFP16202
DFP16251
DFP16252
DFP16254
DFP16255
DFP20251
DFP20252
DFP20254
DFP20255
DFP24242
AVAILABLE IN WIDE RANGE
OF STANDARD AND CUSTOM
SIZES & THICKNESS
DISPOSABLE PANEL FILTERS
PART NUMBER
DESCRIPTION
DFS14251
Disposable Standard Throw Away Filter 14” x 25” x 1”
DFS14252
DFS15201
DFS15202
DFS16201
DFS16202
DFS16251
DFS16252
●● Disposable panels are constructed using
a double skinned progressively dense
fiberglass or 100% polyester media.
●● Standard sizes are available in 1” and 2”
depth.
●● Excellent for use in residential furnaces
and commercial equipment
●● Most economical method to filter air
AVAILABLE IN WIDE RANGE OF STANDARD AND CUSTOM SIZES & THICKNESS
FILTER FRAMES
Available in the following sizes
●● Filter Frames are manufactured using
galvanized steel.
●● Fishlocked on furnace side for ease of
installation.
●● Precise fabrication to ensure proper fit.
●● Spot welded construction.
14” x 22” x 1”
14” x 25” x 1”
14” x 25” x 4”
16” x 20” x 1”
16” x 25” x 1”
16” x 25” x 4”
20” x 25” x 1”
49
AIR CLEANERS
2000 Series MERV 13 - Media Air Cleaners
●● Superior particulate removal, traps sub micron particulate
including viruses and bacteria
●● Painted cabinet, same as existing 2210/2310/2410
●● Recommended air flow is up to 2,000 CFM
●● Proprietary design protects replacement media
●● Collapsible media with self spacing pleats
●● SelfSeal’” reduces air bypass and improves performance
Model 2210, 2310 & 2410
PART NUMBER
DESCRIPTION
2210
Aprilaire High Efficiency Air
Cleaners 20 x 2S
2310
Cleaners 20 x 20
2410
Cleaners 16 x 25
Model 2210, 2310, 2410
Replacement Filter Media
PART
NUMBER
REPLACEMENT
FILTER
PART NUMBER
REPLACEMENT
FILTER
PART NUMBER
2210
210-APR (MERV 11)
213-APR (MERV 13)
2310
310-APR (MERV 11)
313-APR (MERV 13)
2410
410-APR (MERV 11)
413-APR (MERV 13)
ACM Series
●● Slim profile for easy installation and easy stocking
●● Heavy-duty. 20 gauge galvanized steel cabinet construction -assembles using
toggle locks.
●● Factory-punched screw and drill-access holes in cabinet for fast and simple
installation.
●● Snap-on, ABS plastic cabinet door for easy filter replacement without tools.
PART
NUMBER
RECOMMENDED SHIPPING
CFM
WEIGHT
RANGE
(lbs)
NOMINAL
SIZE
CABINET
DIMENSIONS
ACM1000M-108 1000
16” x 20”
18⅛”H x 19⅞”W x 5½”D
600 - 1200
14
ACM1400M-108 1400
16” x 25”
18⅛”H x 24⅞”W x 5½”D
1000 - 1600
15.75
ACM1600M-108 1600
16” x 20”
22¼”H x 19⅞”W x 5½”D
1200 - 1800
15
ACM2000M-108 2000
16” x 20”
22¼”H x 27⅞”W x 5½”D
1600 - 2200
17.25
CFM
Filter Replacements
50
SHIPPING
NOMINAL SIZE ACTUAL FILTER SIZE WEIGHT
(lbs)
PART
NUMBER
RATING
CFM
FR1000M-108
MERV 8
1000
16” x 20” x 4”
15½”H x 19½”W x 3¾”D
4.5
FR1400M-108
MERV 8
1400
16” x 25” x 4”
15½”H x 19½”W x 3¾”D
6.25
FR1600M-108
MERV 8
1600
20” x 20” x 4”
19½”H x 19½”W x 3¾”D
5.5
FR2000M-108
MERV 8
2000
20” x 25” x 4”
19½”H x 24½”W x 3¾”D
7
HEAT RECOVERY VENTILATOR
S SERIES
●● Ideal for condos, lofts and small homes.
●● Ultra-slim; only 9 inches thick. The slimmest ERV
available for high-rise towers.
●● The most energy efficient in its class.
●● The only Energy Star® qualified in its category.
●● The quietest in its category.
●● Innovative snap-fit and self-damping ceiling mountings for fast and easy installation.
●● No drain required.
●● Equipped with the ColdShield cold protection system.
●● 5-year warranty on parts and ERV core.
●● Washable core filters.
RATE OF
POWER
APPARENT SENSIBLE
AIR-FLOW
MODEL
PORT
PORT
CONSUMPTION
EFFECTIVENESS
2
NO.
LOCATION DIAMETER
(cfm)
(low speed)
AT 0ºC (lower speed)
(low/high)
S10
ERV
S10
ERV
Plus
41700
41720
Sides
5” Round
(12.7 cm)
50-100
44 W
75%
Sides
5” Round
(15 cm)
50-100
40 W
75%
DIMENSIONS
(Height)
(Width)
(Depth)
9” (22.86 cm)
27⅛” (68.9 cm)
20” (50.8 cm)
9” (22.86 cm)
27⅛” (68.9 cm)
23⅛” (50.8 cm)
WEIGHT QUANTITY
(approx.) per SKID
32 lb.
(14.5 kg)
12
35 lb.
(15.9 kg)
12
*CFM at 0.4 inches w.g. (100 Pa)
K SERIES
●●
●●
●●
●●
●●
●●
●●
●●
●●
MODEL
PORT
NO.
LOCATION
K7
K7
ERV
RATE OF
POWER
APPARENT SENSIBLE
AIR-FLOW
CONSUMPTION
EFFECTIVENESS
(cfm)2
(low speed)
(low/high)
Top
4” Round
(10.2 cm)
35-70
40 W
70%
44162
Top
4” Round
(10.2 cm)
35-70
34 W
77%
44163
Sides
4” Round
(10.2 cm)
35-70
34 W
77%
Top
4” Round
(10.2 cm)
37-77
37 W
80%
Sides
4” Round
(10.2 cm)
37-77
37 W
80%
Top
4” Round
(10.2 cm)
47-90
39 W
75%
Sides
4” Round
(10.2 cm)
47-90
39 W
75%
44153
44500
K10
HRV
PORT
SIZE
44150
44152
K8
HRV
Ideal for lofts and small homes.
Up to 90 CFM* according to model selection.
Fits almost anywhere such as a closet or above a hot water tank.
Available with horizontal or vertical ports (factory-configured).
Quick and easy to balance and install with integrated hooks and drain fitting, chain and
spring kit included.
Quiet and efficient blower.
Energy efficient.
5-year warranty on parts and ERV core; limited lifetime warranty on HRV core.
Washable core filters.
44502
DIMENSIONS
(Height)
(Width)
(Depth)
16-1/4” (41.28 cm)
15-1/2” (39.37 cm)
15-5/8” (39.69 cm)
16-1/4” (41.28 cm)
15-1/2” (39.37 cm)
15-5/8” (39.69 cm)
16-1/4” (41.28 cm)
15-1/2” (39.37 cm)
15-5/8” (39.69 cm)
16-1/4” (41.28 cm)
15-1/2” (39.37 cm)
15-5/8” (39.69 cm)
16-1/4” (41.28 cm)
15-1/2” (39.37 cm)
15-5/8” (39.69 cm)
16-1/4” (41.28 cm)
15-1/2” (39.37 cm)
15-5/8” (39.69 cm)
16-1/4” (41.28 cm)
15-1/2” (39.37 cm)
15-5/8” (39.69 cm)
WEIGHT QUANTITY
(approx.) per SKID
30 lb.
(13.6 kg)
18
34 lb.
(15.2 kg)
18
34 lb.
(15.2 kg)
12
30 lb.
(13.6 kg)
18
30 lb.
(13.6 kg)
12
30 lb.
(13.6 kg)
18
30 lb.
(13.6 kg)
12
51
E SERIES
●● Ideal for high performance small to large-size homes.
●● Equipped with 2 powerful and reliable PSC motors or 2 state-of-the-art ECM motors
providing significant electrical consumption savings (67% average compared to
standard motors).
●● All aspects designed to facilitate air flow balancing and simplify installation.
●● No drain required for most climate zones (ERV only).
●● 5-year warranty on parts and ERV core; limited lifetime warranty on HRV core.
●● Washable core filters.
MODEL
PORT
NO.
LOCATION
E10
HRV
E15
HRV
41126
43135
E15
ECM
HRV
43901
E15
ECM
ERV
43911
PORT
SIZE
RATE OF
APPARENT
POWER
AIR-FLOW
SENSIBLE
CONSUMPTION
(cfm)2
EFFECTIVENESS
(low speed)
(low/high)
Top
Oval,
fit 6” round
(15 cm)
50-105
42 W
84%
Top
Oval,
fit 6” round
(15 cm)
65-155
54 W
83%
Top
Oval,
fit 6” round
(15 cm)
Top
Oval,
fit 6” round
(15 cm)
10-80
53-106
66-132
80-156
40-80
53-105
67-120
84-140
24 W
at 49 CFM
32 W
at 81 CFM
26 W
at 53 CFM
37 W
at 84 CFM
DIMENSIONS
(Height)
(Width)
(Depth)
24-9/16” (62.4 cm)
23-9/16” (59.9 cm)
14-15/16” (38 cm)
WEIGHT QUANTITY
(approx.) per SKID
52 lb.
(23.6 kg)
10
24-9/16” (62.4 cm)
23-9/16” (59.9 cm)
14-15/16” (38 cm)
52 lb.
(23.6 kg)
10
83%
24-9/16” (62.4 cm)
23-9/16” (59.9 cm)
14-15/16” (38 cm)
52 lb.
(23.6 kg)
10
73%
24-9/16” (62.4 cm)
23-9/16” (59.9 cm)
14-15/16” (38 cm)
65 lb.
(29.5 kg)
10
SOLO 1.5 ES/2.0 ES
DUO 1.5/2.0
●● Ideal for mid to large size homes.
●● The Solo family offers a complete solution to reduce excess humidity and
expel gaseous pollutants.
●● Very quiet systems.
●● Totally reversible units to simplify installation.
●● Quick, effective installation: pressure taps, balancing dampers and straps for
insulated ducts.
●● Solo’s are equipped with a heat recovery core (limited lifetime warranty),
5-year warranty on parts.
●● Washable foam filters at time of purchase.
MODEL
PORT
NO.
LOCATION
Solo
1.5ES
HRV
Solo
2.0ES
HRV
Duo
1.5
ERV
Duo
2.0
ERV
52
PORT
SIZE
RATE OF
APPARENT
POWER
AIR-FLOW
SENSIBLE
CONSUMPTION
(cfm)2
EFFECTIVENESS
(low speed)
(low/high)
DIMENSIONS
(Height)
(Width)
(Depth)
WEIGHT QUANTITY
(approx.) per SKID
Sides
6” round
(15 cm)
66-150
67 W
79%
16-1/2” (42 cm)
35” (88.9 cm)
17-1/8” (43.5 cm)
65 lb.
(29.5 kg)
9
Sides
6” round
(15 cm)
82-192
71 W
75%
16-1/2” (42 cm)
35” (88.9 cm)
17-1/8” (43.5 cm)
65 lb.
(29.5 kg)
9
46700
Sides
6” round
(15 cm)
68-120
110 W
80%
16-1/2” (42 cm)
35” (88.9 cm)
17-1/8” (43.5 cm)
73 lb.
(33 kg)
9
47000
Sides
6” round
(15 cm)
110-169
137 W
77%
16-1/2” (42 cm)
35” (88.9 cm)
17-1/8” (43.5 cm)
73 lb.
(33.1 kg)
9
46720
47720
CONSTRUCTO 1.0 / 1.2
●● Ideal choice for new single family small to mid-size homes, high-rise
condos and other limited space applications.
●● Simple to install in a bulkhead or closet with its unique slim design and
compact footprint.
●● Easy to balance with integrated dampers and pressure taps.
●● Available with horizontal or vertical ports (factory-configured).
●● 2-year warranty on parts; limited lifetime warranty on HRV core.
●● Washable foam filters.
CONSTRUCTO 1.5 ES / 2.0 ES
●● Ideal for mid to large size homes.
●● Offer ventilation features to meet codes and standards operation at a valueconscious price.
●● Quick, effective installation: pressure taps, balancing dampers, integrated “snap-in”
drain system and straps for insulated ducts.
●● Equlpped with a heat recovery core (limited lifetime warranty).
●● 5-year warranty on parts.
MODEL
PORT
NO. LOCATION
C.A.E.
41000
1.5 ES
HRV
2.0 ES
HRV
WEIGHT QTY per
(approx.) SKID
12-1/4” (31.1 cm)
40 lb.
18-1/4” (46.6 cm)
(18 kg)
15” (38.1 cm)
12 3/16” (31 cm)
42 lb.
27 1/16” (68.8 cm)
(19 kg)
19 13/16” (50.3 cm)
50
110 W
(high speed)
N/A
Sides
Oval - Fit 5”
Round
(12.5 cm)
50-98
43 W
74%
Top
Oval - Fit 5”
Round
(12.5 cm)
50-98
43 W
74%
Sides
Oval - Fit 5”
Round
(12.5 cm)
49-105
42 W
79%
Top
Oval - Fit 5”
Round
(12.5 cm)
49-105
42 W
79%
Sides
Oval - Fit 5”
Round
(12.5 cm)
44-120
42 W
79%
Top
6” Round
(15 cm)
44-120
42 W
79%
Sides
6” Round
(15 cm)
66-150
67 W
79%
16½” (42 cm)
35” (89.1 cm)
17⅛” (43.5 cm)
65 lb.
(29.5 kg)
9
Sides
6” Round
(15 cm)
82-192
71 W
75%
16½” (42 cm)
35” (89.1 cm)
17⅛” (43.5 cm)
65 lb.
(29.5 kg)
9
41502
41506
41554
1.2
ERV
DIMENSIONS
(Height)
(Width)
(Depth)
6” Round
(15 cm)
41504
1.0
ERV
APPARENT
RATE OF
POWER
SENSIBLE
AIR-FLOW
CONSUMPTION
EFFECTIVENESS
(cfm)2
(low speed)
(low/high)
Sides
41500
1.0
HRV
PORT
SIZE
41556
46110
47110
14 11/16” (37.3 cm)
42 lb.
22 9/16” (57.4 cm)
(19 kg)
13/
19
16” (50.3 cm)
12 3/16” (31 cm)
45 lb.
27 1/16” (68.8 cm)
(20.4 kg)
19 13/16” (50.3 cm)
14 11/16” (37.3 cm)
45 lb.
22 9/16” (57.4 cm)
(20.4 kg)
13/
19
16” (50.3 cm)
12 3/16” (31 cm)
45 lb.
27 1/16” (68.8 cm)
(20.4 kg)
13/
19
16” (50.3 cm)
12 3/16” (31 cm)
45 lb.
27 1/16” (68.8 cm)
(20.4 kg)
13/
19
16” (50.3 cm)
24
12
10
12
10
12
10
53
HEAT RECOVERY VENTILATOR (HRV.ERV)
HE SERIES 1.8 /2.6
Ideal for mid to large size homes.
Ultimate heat recovery performance and air flow up to 320 CFM.
SilentSure™ quiet operation.
For consumers living in cold climates who seek superior heat recovery performance
compared to all other HRV systems on the market.
●● 5-year warranty on parts; limited lifetime warranty on core.
●●
●●
●●
●●
MODEL
PORT
NO.
LOCATION
RATE OF
POWER
APPARENT SENSIBLE
AIR-FLOW
CONSUMPTION
EFFECTIVENESS
(cfm)2
(low speed)
(low/high)
PORT
SIZE
1.8
HRV
45400
Top
8” (20 cm)
inside ports
6” (15 cm)
outside ports
115-197
158 W
95%
2.6
HRV
48400
Top
5” Round
(15 cm)
50-100
40 W
75%
DIMENSIONS
(Height)
(Width)
(Depth)
WEIGHT QUANTITY
(approx.) per SKID
42-3/4” (108.6 cm)
140 lb.
23” (58.4 cm)
(63.5 kg)
24” (60.1 cm)
42-3/4” (108.6 cm)
140 lb.
23” (58.4 cm)
(63.5 kg)
24” (60.1 cm)
4
4
MAIN WALL CONTROLS
PART NUMBER
DESCRIPTION
40350
(OFF, min/max exchange speed, dehumidistat)
40370
(OFF, min/max exchange speed, intermittent 20 min./hour
40390
(OFF, min/max exchange speed, recirculation)
40440
(Programmable, SMART mode, LCD display)
40395
(OFF, min/max exchange speed, intermittent 30 min./hour,
recirculation, dehumidistat override
Constructo
Life-Touch Constructo
Simple-Touch Constructo
Altitude
Deco-Touch
COMPATIBILITY
Constructo 1.0 / 1.2 ERV / 1.5 / 2.0,
Solo 1.5ES / 2.0ES, Duo 1.5 / 2.0,
K7 ERV / K8 HRV / K10 HRV,
E10 HRV / E15 HRV, S10 ERV / S10 ERV+
Constructo 1.0 / 1.2 ERV / 1.5 / 2.0,
Solo 1.5ES / 2.0ES, Duo 1.5 / 2.0,
E10 HRV / E15 HRV, S10 ERV / S10 ERV+
Constructo 1.0 / 1.2 ERV / 1.5 / 2.0,
Solo 1.5ES / 2.0ES,
K7 ERV / K8 HRV / K10 HRV, S10 ERV+
Constructo 1.0 / 1.2 ERV,
Solo 1.5ES / 2.0ES, Duo 1.5 / 2.0,
Novofit 1.5 ES / 2.0 ES, HE 1.8 / 2.6
E10 HRV / E15 HRV / E15 HRV ECM / E15 ERV ECM,
S10 ERV+
Constructo 1.0 / 1.2 ERV,
Solo 1.5ES / 2.0 (no recirculation), Solo 1.5ES / 2.0ES, Duo 1.5 / 2.0,
Novofit 1.5 ES / 2.0 ES, HE 1.8 / 2.6
S10 ERV+ / S10 ERV (no recirculation)
OPTIONAL WALL CONTROLS
PART NUMBER
00910
11297
12030
03364
DESCRIPTION
60-min Mechanical Timer
COMPATIBILITY
Dehumidistat (24 V / 120 V)
All Models
(allows up to 60 min. of high speed operation)
20-min Lighted Push-Button
(20-min high speed ventilation)
20/40/60-min Lighted Push-Button
(20/40/60-min high speed ventilation)
All Models
All Models
Solo 1.5ES / 2.0ES, Duo 1.5 / 2.0,
Novofit 1.5 ES / 2.0 ES,
HE 1.8 / 2.6
S10 ERV+
54
MODEL NO.
DESCRIPTION
COMPATIBILITY
19255
11988
14690
14695
K7 / K7 ERV / K8 HRV / K10 HRV wall mount bracket kit
K7 / K7 ERV / K8 HRV, K10 HRV units
Complete air flow balancing kit with a tool box
All Models
Condensed kit (Y-Tandem, complete exterior vent, screws)
Constructo 1.0
Simplified metal installation kit (tandem)
Constructo 1.0
HUMIDIFIERS
Model 700
Model 600
Model 500
Model 400
Model 800
Powered Unit
Large Bypass
Small Bypass
Large Bypass
Residential Steam
PART NUMBER
DESCRIPTION
500MK
600MK
700M
800
Aprilaire® Humidifier manual digital control with installation kit - 3000 sq.ft.
Aprilaire® Humidifier Steam up to 6200 sq.ft. capacity of 11.5, 20.5 or 23.3 gal.
DIGITAL CONTROL OPTION - Automatic Digital Humidistat Control
Digital Control MC provides accurate information and automaticalaly delivers
proper humidity levels continually; regardless of the temperature or conditions.
●●
●●
●●
●●
●●
Know your relative humidity.
Know when your system is running.
Know when to replace your water panel (Evaporative only).
Know immediately when service is needed.
Turn on the HVAC blower for humidification.
PART NUMBER
DESCRIPTION
60
Automatic Digital Humidistat Control
HFT SERIES™ - Flow-Thru Humidifiers
Flow-thru humidifiers are exceptionally popular,
primarily because they require almost no cleaning or
maintenance. Households that have hard water should
certainly opt for this model as hard water is laden with
minerals that can build up over time.
RATED OUTPUT
EVAPORATION
RATE
TYPICAL APPLICATION
TYPE
MODEL
NUMBER
Bypass Flow Thru
HFT2100
14
0.58
2,121
3,333
1,627
Bypass Flow Thru
HFT2700
18
0.75
2,725
4,285
1,955
Fan Powered
Flow-Thru
HFT2900FP
19
0.79
2,880
4,525
2,065
(GALLONS PER
DAY)
(GALLONS PER
HOUR)
SQ. FT. AVG. SQ. FT. TIGHT
HOUSE
HOUSE
SQ. FT.
LOOSE
HOUSE
Includes universal humidistat, self-piercing saddle valve, 24 volt transformer, mounting template,
mounting hardware and homeowner’s manual/installation instructions.
55
HUMIDIFIERS
Model 570 DMM/DMD Specifications
Gallons Per Day
Home Size
Type
Unit Dimensions
Weight
Plenum Opening
Duct Opening
Operation
Valve
Mounting
●● The 570DMD comes with a GFX3
Automatic Digital Humidistat that
features a manual or automatic
mode with an outdoor sensor
for temperature compensating
control. The 570DMM comes with
a MHX3 Select-Control manual.
●● Bypass humidifier mounts easily
on the warm or return plenum and
Warranty
delivers 12 GPD.
Model 900 DMD/DMM Specifications
Gallons Per Day
Home Size
Type
Unit Dimensions
Weight
Plenum Opening
Bypass Duct
Operation
Valve
Mounting
17
Up to 2,800 sq. ft.
Flow Through Vapor Pad®
12” W x 16½” H x 10” D
8 lbs.
8¾” W x 12” H
6”
Water evaporation via furnace heat & fan
A Models include GCV3412 Code Valve;
M Models feature a Saddle Valve
Warm Air or Return Air Duct
Ten Years
TEN
Warranty
WARRANTY
12
Up to 2,000 sq. ft.
11⅞” W x 13⅜” H x 9½” D
15 lbs.
8¾” W x 9½” H
6”
Saddle Valve & Solenoid Valve
Return Air Duct or Warm Air Plenum
Ten Years
TEN
WARRANTY
YEAR
●● Model 900DMD comes with a GFX3 Automatic Digital
Humidistat that features a manual or automatic
mode with an outdoor sensor
for temperature compensating
control. Model 900DMM comes
with a MHX3 Select-Control
Manual Humidistat and give you
reliability you can depend on for
quality comfort control.
●● Bypass humidifier mounts easily
on the warm or return plenum
and delivers 17 GPD.
YEAR
●MHX3
●
Select-Control Manual
Humidistat is included.
®
●GeneralAire
●
’s highest
capacity model delivers 23
GPD and is ideal for today’s
larger homes.
Model 1099 LHS Specifications
Gallons Per Day
Home Size
Type
Unit Dimensions
Weight
Plenum Opening
Duct Opening
Operation
Valve
Mounting
Warranty
23
Up to 3,000 sq. ft.
16” W x 16” H x 11” D
15 lbs.
13¼” W x 9¼” H
7” (Assembly Supplied)
Saddle Valve & Solenoid Valve
Return Air Duct or Warm Air Plenum
Five Years
FIVE
WARRANTY
YEAR
HEPA AC500 Specifications
Weight
Plemun Mount Port
Openings
Collar Mount Port
Openings
Installation Type
Electrical Supply
Power Consumption
28 lbs.
16” x 3½”
8” Round
Plenum, Wall or Floor Mounted
120 VAC @ 60 Hz
134W
Certification
Air Flow Data
Amperage
Efficiency
Warranty
56
220-300 CFM
1.5A
99.7% at .30 microns
Five Years
FIVE
WARRANTY
YEAR
REPLACEMENT FILTERS
PART NUMBER
DESCRIPTION
GF-990-13
GF-GA10
GF-GA35
Replacement Humidifier Pad for General #1042
Replacement Vapor Pad for Aprilaire 500 & General 570
Replacement Vapor Pad for Aprilaire 600/700
DE-HUMIDIFIERS
MODEL 1830
UNIT SIZE (inches)
Width x Height x Depth
CAPACITY
WEIGHT
(lbs)
WARRANTY
12.5” x 14.5” x 25”
70 pints per day
61 lbs.
5 Years
MODEL 1850 / 1850F / 1850W
UNIT SIZE (inches)
CAPACITY
WEIGHT
(lbs)
WARRANTY
12.5” x 14.5” x 27.5”
95 pints per day
75 lbs.
5 Years
1850F is a free-standing dehumidifier on coasters with no duct collars.
1850W is a hard-wired unit only
MODEL 1770A
UNIT SIZE (inches)
CAPACITY
WEIGHT
(lbs)
WARRANTY
20.75” x 20.62” x 24”
135 pints per day
100 lbs.
5 Years
57
GRILLES
GRILLES
STEEL DOUBLE DEFLECTION
c/w Steel Opposed Blade Damper
PART NUMBER
DESCRIPTION
61DH-00806SAWA Steel Register D/Def. 8” x 6” c/w OBD (h/f/b) White
Model 61DH-0
STEEL SINGLE DEFLECTION
c/w Fixed 45º Blade
PART NUMBER
DESCRIPTION
6145H0808SAWA
R/A Grille Steel S/Def. 8” x 8” White 45 deg. Fixed
6145H1004SAWA
614H1010SAWA
6145H1206SAWA
6145H1212SAWA
6145H2412SAWA
6145H2424SAWA
Model 6145H
STEEL FRAME EGGCRATE GRILLES
PART NUMBER
DESCRIPTION
61ECL1212SAWACA Steel R/A Grille Eggcrate 12” x 12” White Lay-In (T-Bar)
61ECL2424SAWACA Steel R/A Grille Eggcrate 24” x 24” White Lay-In (T-Bar)
61ECS0606SAWACA Steel R/A Grille Eggcrate 6” x 6” White Surface Mount
58
Model 61EC
ALL GRILLES ARE AVAILABLE IN A VARIETY OF SIZES AND OPTIONS
DIFFUSERS
DIFFUSERS
STAMPED SQUARE CEILING DIFFUSERS
PART NUMBER DESCRIPTION
Model RNS
RNSL1206SW
Lay-In Diffuser 6” dia. - 12” sqre. Steel White (T-Bar)
RNSL1208SW
RNSL2406SW
RNSL2408SW
RNSL2410SW
RNSL2412SW
RNSL2414SW
ROUND CEILING DIFFUSERS
Model RNR
RNR06AW
Round Ceiling Diffuser 6” Steel White
RNR08AW
RNR10AW
RNR12AW
RNR14AW
RNR16AW
ARCHITECTURAL CEILING DIFFUSERS
Model UNI
UNIL1208AW
Architectural Lay-In Diffuser 8” dia. - 12” Steel White
UNIL2406AW
UNIL2408AW
UNIL2410AW
UNIL2412AW
UNIL2412AW
ALL DIFFUSERS ARE AVAILABLE IN A VARIETY OF SIZES AND OPTIONS
59
FLOOR / SIDEWALL GRILLES
FLOOR GRILLES
RF41003B
Floor Register Plastic 4” x 10” White
RF41036B
Floor Register Plastic 4” x 10” Brown
RG0229
Floor Register Steel 4” x 10” Beige
RG0230
Floor Register Steel 4” x 10” Black
RG0234
Floor Register Steel 4” x 10” Brown
RG0246
Floor Register Steel 4” x 10” White
RG0257
Floor Register Steel 4” x 12” Brown
RG0266
Floor Register Plastic 4” x 12” White
DESIGNER FLOOR GRILLES
PART
NUMBER
DESCRIPTION
RG2189
Floor Register Steel 4” x 10” Pewter Victorian Design
RG3118
Floor Register ABS 4” x 10” Light Oak Louvered Design
RG3120
Floor Register ABS 4” x 10” Maple Louvered Design
RG3122
Floor Register ABS 4” x 10” Satin Nickel Louvered Design
RG3126
Floor Register ABS 4” x 10” Satin Nickel Victorian Design
RG3130
Floor Register ABS 4” x 10” Antique Brass Oriental Design
RG3132
Floor Register ABS 4” x 10” Satin Nickel Oriental Design
SIDEWALL RETURN AIR GRILLES
PART
NUMBER
60
DESCRIPTION
RG0358
Sidewall R/A Grille 8” x 10” White
RG0392
RG0428
RG0550
RG0397
EXHAUST / INTAKE
HEAVY DUTY FRESH
AIR INTAKE CAP
ALUMINUM: ICA
Sizes: 4”, 5”, 6”, 7”, 8”,
9”, 10” and 12” dia.
PART NUMBER
DESCRIPTION
SVH4B
SVH4W
Exhaust Hood 4” Brown c/w Pipe and Bird Guard
Exhaust Hood 4” White c/w Pipe and Bird Guard
SVHAB5
SVHAW5
SVHAB6
SVHAW6
SVMAB4
SVMAW4
Intake Hood 4” Brown c/w Pipe
Intake Hood 4” White c/w Pipe
SVMAB5
SVMAW5
SVMAB6
SVMAW6
HEAVY DUTY
EXHAUST VENT
CAP ALUMINUM:
ECA
Sizes: 4”, 5”, 6”, 7”,
8”, 9”, 10” and 12” dia.
HEAVY DUTY FRESH AIR
INTAKE CAP STEEL: ICS
Sizes: 4”, 5”, 6”, 7”, 8”, 9”,
10” and 12” dia.
HEAVY DUTY EXHAUST
VENT CAP STEEL: ECS
Sizes: 4”, 5”, 6”, 7”, 8”, 9”,
10” and 12” dia.
LEAK-PROOF WALL BOXES
SINGLE WALL BOX
DOUBLE WALL BOX
TRIPLE WALL BOX
PART
NUMBER
DESCRIPTION
SWBL-8
Single Wallbox Leak-Proof 5”
SWBL-6
Single Wallbox Leak-Proof 6”
DWBL-8
Double Wallbox Leak-Proof 5”
DWBL-6
Double Wallbox Leak-Proof 6”
TWBL-8
Triple Wallbox Leak-Proof 5”
TWBL-6
Triple Wallbox Leak-Proof 6”
61
DAMPERS & LOUVERS
LINT TRAPS
PART
NUMBER
DESCRIPTION
LT180F
Lint Trap Complete 4x4
LT200
LT250
LT-180
LT-200
LT-250
FIRE DAMPERS
FDAH0808
Fire Damper 8” x 8” (wxh) ‘A’ Horiz. 1½ hr. 4¼” Standard FL 165F
FDAH1008
FDAH1010
FDAH1204
FDAH1408
FDAH1608
FDAH2410
FIRE DAMPERS
FDCHCR04
Fire Damper Type-C-Round Horiz. 4” dia. (FL 165F)
FDCHCR05
FDCHCR08
FDCHCR07
FDCHCR08
FDCHCR10
FDCHCR12
CONTROL DAMPERS
62
LOUVERS
BACKDRAFT DAMPERS
ALL ITEMS AVAILABLE IN CUSTOM SIZES AND OPTIONS
CONTINENTAL FIREPLACES
GAS FIREPLACES
www.continentalfireplaces.com
BCDV42CF
BCDV36
BCDV36
CLHD45
CLHD31
MODEL
BTU
VENTING
GLASS DIMENSIONS
(W x H)
OUTSIDE DIMENSIONS
(W x H x D)
BCDV33NR
16,400
4&7
30 5/8” x 16”
34 1/4” x 29 5/8” x 13 1/2”
CDV33NR
22,000
4&7
30 5/8” x 16”
34 1/4” x 29 5/8” x 13 1/2”
BCDV34NT
15,000
4&7
30 5/8” x 16”
34 1/4” x 29 5/8” x 13”
CDV34NT
22,000
4&7
30 5/8” x 16”
34 1/4” x 29 5/8” x 13”
BCDV36NTR
18,000
4&7
31 5/8” x 19 3/8”
36” x 32 3/8” x 14 1/4”
CDV36NTR
30,000
4&7
31 5/8” x 19 3/8”
37 1/4” x 33” x 14 1/4”
BCDV36CFNTR
17,000
4&7
31 5/8” x 19 3/4”
40” x 34” x 17”
BCDV36CFGN-1
17,000
4&7
31 5/8” x 19 3/8”
40” x 34” x 17”
CHD35NT
25,000
4&7
31 1/4” x 28 1/8”
35 1/4” x 41” x 20 1/2”
CHD40NT
27,000
4&7
36” x 28”
40 1/4” x 41” x 20 1/2”
CHD46NT
30,000
4&7
42” x 28”
46 1/4” x 41” x 20 1/2”
CHDX40NT-1
40,000
4&7
36” x 28”
40 1/4” x 41” x 20 1/2”
CDV70-2
35,000
4&7
31 5/8” x 23”
37 1/4” x 36” x 18”
BCDV42N-D
30,000
4&7
38 5/8” x 22”
42” x 35 1/2” x 22”
BCDV42CFN
24,000
4&7
38 5/8” x 22”
46” x 37” x 25”
CLHD45
24,000
4&7
41 1/2” x 17 3/4”
46 1/4” x 37 3/16” x 19 7/8”
CWHD31N
20,000
4&7
31 1/2” x 16 1/2”
43 5/16” x 28” x 7 3/8
63
CONTINENTAL FIREPLACES
INSERTS
CDI-30G
CBI360
CDI-30
MODEL
BTU
VENTING
GLASS DIMENSIONS
(W x H)
OUTSIDE DIMENSIONS
(W x H x D)
CBI360-N
24,000
3&3
29 3/4” x 11 3/4”
30 1/8” x 27 1/2” x 17 1/2”
CDIZC-N
24,000
3&3
28 1/2” x 16”
36” x 27” x 15 1/2”
CDI-30N
24,500
3&3
28 1/2” x 14”
30 1/16” x 27 1/2” x 18 3/4”
CDI-30GN
24,500
3&3
28 1/2” x 14”
30 1/16” x 25 1/2” x 20 3/8”
GAS STOVES
CDVS600
CDVS280
64
CDVS500
MODEL
BTU
VENTING
GLASS DIMENSIONS
(W x H)
OUTSIDE DIMENSIONS
(W x H x D)
CDVS600-1N
35,000
4&7
21” x 18 3/4”
27” x 30 1/2” x 17 7/8”
CDVS280-N
30,000
4&7
21” x 12 3/8”
22 1/2” x 6 3/4” x 18 1/2”
CDVS500-1N
44,000
4&7
25 3/4” x 13 7/8”
28 1/4” x 30 3/4” x 21 5/8”
DIMPLEX FIREPLACES
WICKSON WALL-MOUNT FIREPLACE
BFL34
The sizing of this linear electric fireplace makes it a perfect fit for any room.
Ambience, warmth and snug to the wall fit make this unit a must have for the
most discerning consumer or designer. The LED flame meanders from the
middle of the crushed glass ember bed giving the unit an impressive effect.
120 Volts / 1,220 Watts / 4,163 BTU
DIMENSIONS (W x D x H)
34-1/4” x 7” x 19-1/2”
SYNERGY WALL-MOUNT FIREPLACE
BFL50
The Synergy features realistic patented LED flame that dances on the crushed
and silvered glass pieces, adding comfort, ambiance and beauty to any space.
The heat that warms your room comes from the front of the fireplace allowing our
sleek and elegant design to be installed snug to the wall.
The Cohesion wall-mount surround makes a seamleass addition to any modern
space with simple detailing. The striking black or burnished walnut finish makes a
contemporary statement.
120 Volts / 1,230 Watts / 4,198 BTU
50-1/4” x 7” x 19-1/2”
GALVESTON WALL-MOUNT FIREPLACE
BLF74
The Dimplex LED flame dances on a bed of crushed and silvered glass
pieces creating a stunning effect that cannot be matched. The heat that
warms your room comes from the front of the fireplace allowing our sleek
and elegant design to be installed snug to the wall. This incredible fireplace
can be recessed into or mounted onto a wall. Versatile and beautiful.
120 Volts / 1,230 Watts / 4,198 BTU
240 Volts / 2,430 Watts / 8,290 BTU
74-1/4” x 7-1/2” x 19-1/2”
33” MULTI-FIRE XD ELECTRIC FIREBOX
TM
PF3033HL
If change is good then the all new Multi-Fire XD Electric Firebox
offers something truly incredible. The sleek full view design allows an
unencumbered view of the stunning Realogs , the second generation
of our patented inner glow technology. The dazzling Multi-Fire XD
can accurately reproduce a natural wood-burning fire, gas fireplace or
a range of ambient light themes that range from moody and hypnotic,
to pulsing and vibrant. Combined with a high-efficiency heating
system and intuitive multi-function control options, this new design is
the perfect look and feel for any space
120 Volts / 1,400 Watts / 4,777 BTU
33-1/8” x 9-1/4” x 23-3/8”
65
DIMPLEX FIREPLACES / NAPOLEON HEATERS
GIBRALTAR FIREPLACE PACKAGE
GDS33G-1240TR
The Gibraltar fireplace package is a two-toned casual contemporary fireplace
featuring an interlacing burnished-walnut wood frame that breaks up the generous
use of travertine - a soft, stone like component. The Gibraltar features a new slim
design which makes it suitable for any size room and its flat side craftsmanship allows
baseboard trim to fit flush against the cabinet. The multi-layer large scale unit with
large base and mantle defines an elegant profile making it easy to use as the focal
point of a room.
Choose between the elegant tumbled glass ember bed (as shown) or traditional
patented LED inner glow log set.
120 Volts / 1,000 Watts / 3,415 BTU
64” x 12-3/4” x 51”
BENNETT ELECTRIC FIREPLACE
SMP-155G-E-ST
An elegant companion for the home theatre, the Bennett Media Console
combines convenience and style with ample storage and a reinforced platform for
televisions up to 60” in size.
120 Volts / 1,440 Watts / 4915 BTU
65-3/4” x 20” x 39-3/4”
Many options and styles available
Visit www.dimplex.com
NAPOLEON® OUTDOOR HEATERS
BULLET STYLE SERIES - PTH38P
Modern, durable and striking, the Bullet style patio
heater series is an exciting feature in any outdoor living
area. Available in propane, there are three finished to
choose from; copper, gun metal and stainless steel. The
innovative bullet shaped base simply slides up for easy
propane tank access. With electronic ignition, heat control and 20’ diameter of radiant heat, this
series is sure to impress and warm your guests for endless nights of entertainment.
22,000 - 40,000 BTU’s
Heating Area: 20’ dia. 89-1/2”h x 31”w
Propane
®
LINEAR PATIOFLAME GPFL48MHP
The Linear Patioflame® comes complete with a Hammertone pewter powder coated cabinet and exclusive
Topaz CRYSALINE ember bed. The convenient piano hinged door allows easy access to the control
panel and features a safety valve that turns off the gas if the flame goes out. The burner, burner chassis
and convenient cover plate, complete with handle,
are made from durable weather resistant brushed
stainless steel. A truly unique outdoor fire pit
with a slim, sleek modern design, adding to the
excitement of outdoor living.
60,000 BTU’s
11-7/8”h x 51-7/8”w x 17 7/8”d
Natural gas or propane
TM
66
NAPOLEON BBQ’S
PRESTIGE® SERIES GRILLS
PRODUCT FEATURES
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
Up to 48,000 BTU’s.
Up to 4 burners.
Cooking Area: 760 in2
Available in black porcelain and stainless steel.
Stainless steel tube burners with crossover lighting.
Space saving LIFT EASE™ roll top lid.
Stainless steel side shelves with condiment trays.
Stainless steel cooking system.
Available as a natural gas or propane unit.
EASY ROLL™ locking casters.
P500
PRODUCT FEATURES
Up to 78.500 BTU’s.
Up to 6 burners.
Cooking Area: 900 in2.
Stainless steel tube burners with crossover lighting.
Space saving LIFT EASE™ roll top lid.
Steel side shelves with condiment trays.
Stainless steel cooking system.
Heavy duty rotisserie kit with counter balance and two forks for
delicious restaurant style cooking using the infrared rear burner.
●● Infrared SIZZLE ZONE™ side burner.
●● Available as a natural gas or propane unit.
●● EASY ROLL™ locking casters.
●●
●●
●●
●●
●●
●●
●●
●●
P500RSIB
PRESTIGE PRO™ SERIES GRILLS
PRODUCT FEATURES
●● Up to 80,000 BTU’s.
●● 6 burners.
●● Cooking Area: 900 in2
●● Engaging i-GLOW™ backlit control knobs for late night entertaining.
●● Stainless steel tube burners with crossover lighting.
●● Heavy duty rotisserie kit with counter balance and two forks for
delicious restaurant style cooking using the rear infrared burner.
●● Infrared SIZZLE ZONE™ grill and side burner.
●● Deluxe high top, space saving LIFT EASE™ roll top lid with
polished chrome trim accents and handle.
●● Premium stainless steel side shelves with polished chrome
towel bars and tool hooks.
●● Pedestal base with hidden casters.
●● Premium stainless steel side shelves with integrated beverage
holders and ice bucket with cutting board, polished chrome
towel bars and tool hooks.
●● Add the fun and favour of charcoal on your gas grill with
Napoleon’s® optional charcoal tray.
●● Available as a natural gas or propane unit.
GOURMET GRILLS
PRO500RSIB
67
NAPOLEON BBQ’S
PRODUCT FEATURES
GOURMET GRILLS
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
PRO665RSIB
●●
●●
8 burners.
Cooking Area: 1150 in2 (2920 cm2).
Stainless Steel WAVE™ Cooking Grids.
Infrared SIZZLE ZONE™ side & rotisserie burner.
Commercial quality rotisserie kit with counter balance and 4 forks for
delicious restaurant style cooking utilizing the rear infrared burner.
Engaging NIGHT LIGHT™ control knobs and interior lights for late night
entertaining.
Built-in power bar in the back side to power interior lights and doubles as
a conveninet outlet for rotisserie kit and other electrical devices.
Premium stainless steel side shelves with integrated beverage holders.
and ice/marinade bucket with cutting board.
Stainless steel cooking system with JETFIRE™ ignition.
President’s Limited Lifetime Warranty.
MIRAGE™ SERIES GRILLS
PRODUCT FEATURES
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
3 burners.
GOURMET GRILLS
Double walled LIFT EASE™ stainless steel lid.
Stainless steel WAVE™ cooking grids.
Engaging i-GLOW™ backlit control knobs for late night entertaining.
Stainless steel side shelves with integrated tool hooks and condiment holders.
Built-in model available.
M485
PRODUCT FEATURES
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
M605RSBI
●●
●●
●●
6 burners.
Ceramic infrared bottom and rear burner.
Engaging i-GLOW™ backlit control knobs for late night entertaining.
Range side burner and integrated ice/marinade bucket and cutting
boards.
Infrared SIZZLE ZONE™ side & rotisserie burner.
Double walled LIFT EASE™ stainless steel lid.
Stainless steel side shelves with integrated tool hooks and condiment
holders.
Stainless steel WAVE™ cooking grids.
Built-in model available.
ALL BBQ’S AVAILABLE IN NATURAL GAS OR PROPANE
68
Other models available - Visit www.napoleongrills.com
GAS PRODUCTS
GASTITE
PART
NUMBER
DESCRIPTION
SIZE (ft.)
S93-8A4-50
1/2” Corrugated Stainless Steel Tubing
50
S93-8A4-250
250
S93-11B4-50
50
S93-11B4-250
250
S93-16A4-50
1” Corrugated Stainless Steel Tubing
50
S93-20A4-50
1-1/4” Corrugated Stainless Steel Tubing
50
S93-20A4-75
75
S93-24A4-50
50
S93-24A4-75
75
STRAIGHT FITTING
(ADAPTER/NUT/BUSHING)
PART
DESCRIPTION
NUMBER
XRFTG-8-24
1/2” Straight Fitting - 1/2” NPT
XRFTG-11-24
3/4” Straight Fitting - 3/4” NPT
XR2FTG-16-12
1” Straight Fitting - 1” NPT
XR2FTG-20-6
1-1/4” Straight Fitting - 1-1/4” NPT
XR2FTG-24-4
1-1/2” Straight Fitting - 1-1/2” NPT
COUPLING
PART
NUMBER
DESCRIPTION
XRCPL-8-12
1/2” Coupling
XRCPL-11-12
3/4” Coupling
XR2CPL-16-6
1” Coupling
XRCPL-20-6
1-1/4” Coupling
XR2CPL-24-4
1-1/2” Coupling
STRAIGHT FEMALE
FITTING
(ADAPTER/NUT/BUSHING)
PART
DESCRIPTION
NUMBER
XRFTGFM-8-24
XRFTGFM-11-8-24
XRFTGFM-11-24
STRAIGHT FEMALE
FITTING
(FLANGE/ADAPTER/NUT/BUSHING)
PART
DESCRIPTION
NUMBER
XR2TRM-8-12
1/2” Term. Fitting-Square Flange - 1/2” NPT
XR2TRM-11-12
3/4” Term. Fitting-Square Flange - 3/4” NPT
XR2TRM-16-6
1” Term Fitting-Square Flange - 1” NPT
XR2TRM-20-6
1-1/4” Term Fitting-Square Flange - 1-1/4” NPT
TERM BRACKET
FITTING
(BRACKET/ADAPTER/NUT/BUSHING)
PART
NUMBER
1/2” Straight Fitting - 1/2” Female NPT
DESCRIPTION
XRTRMBKT-8-12 1/2” Term. Bracket Fitting - 1/2” NPT
XRTRMBKT-11-12 3/4” Term. Bracket Fitting - 3/4” NPT
XRTRMBKT-20-6 1-1/4” Term Bracket Fitting - 1-1/4” NPT
XR2TRMBKT-24-4 1-1/2” Term Bracket Fitting - 1-1/2” NPT
PART
NUMBER
MULTI-PORT
MANIFOLDS
DESCRIPTION
3-PORTMAN-1
Cast 3 port - 1/2” x 3 @ 1/2”F x 1/2” F
4-PORTMAN-2
Cast 4 port - 1-1/2” x 4 @ 3/4”F x 1-1/2” F
5-PORTMAN-1 Cast 5 port - 1” F x 1 @ 3/4” F x 4 @ 1/2”F x 3/4” F
5-PORTMAN-2
Cast 5 port - 1-1/4” F x 5 @ 3/4” F x 1” F
69
GAS PRODUCTS
UNDERGROUND GAS PIPE & FITTINGS
PART NUMBER
DESCRIPTION
POLYPIPE-12-150
Polyethylene Pipe 3/4” x 150 ft. (IPS)
POLYPIPE-16-150
Polyethylene Pipe 1” x 150 ft. (IPS)
POLYPIPE-16-250
Polyethylene Pipe 1” x 250 ft. (IPS)
POLYPIPE-20-150
Polyethylene Pipe 1-1/4” x 150 ft. (IPS)
POLYPIPE-20-250
Polyethylene Pipe 1-1/4” x 250 ft. (IPS)
POLYRISER-12
Riser Polyethylene 3/4” (IPS)
POLYRISER-16
Riser Polyethylene 1” (IPS)
POLYRISER-20
Riser Polyethylene 1-1/4” (IPS)
POLYCOUPLING-12
Coupline Polyethylene 3/4” (IPS)
POLYCOUPLING-16
Coupline Polyethylene 1” (IPS)
POLYCOUPLING-20
Coupline Polyethylene 1-1/4” (IPS)
TRACERWIRE
Wire Tracer #14 Ga. Yellow Coated - 250ft.
GAS CONNECTORS
PART NUMBER
DESCRIPTION
FCGSSFF-08-24
FCGSSFF-08-36
FCGSSFF-08-48
FCGSSFF-12-24
FCGSSFF-12-48
FCGSSMF-06-08-12
FCGSSMM-06-24
Flex Connector Gas S/Steel 1/2” x 24” Lng. f x f
Flex Connector Gas S/Steel 3/8” x 1/2” x 24” Lng. m x f
Flex Connector Gas S/Steel 3/8” x 24” Lng. m x m
PART NUMBER
DESCRIPTION
FCGYFF-08-24
FCGYFF-08-36
FCGYFF-08-48
FCGYFF-12-24
FCGYFF-12-48
Flex Connector Gas Yellow 1/2” x 24” Lng. f x f
PART NUMBER
CAN1650BP48
CAN1675BP48
CAN16100BP48
SM50
SM75
RDC48
PART NUMBER
70
DESCRIPTION
Dormont Blue S.S. Connector with Anti-microbial Coating 1/2” dia. x 48” Lng.
Dormont Blue S.S. Connector with Anti-microbial Coating 3/4” dia. x 48” Lng.
Dormont Blue S.S. Connector with Anti-microbial Coating 1” dia. x 48” Lng.
Swivel Max - 1/2” dia. - Connector
Swivel Max - 3/4” dia. - Connector
Restraint & Hardware - 4’ Coiled
DESCRIPTION
16C120FS6QDPC
BBQ Hose & Quick Disconnect
- 3/8” dia. x 10 ft. Lng.
18C120FS8QDPC
BBQ Hose & Quick Disconnect
- 1/2” dia. x 10 ft. Lng.
NGO-3
BBQ Outlet c/w Stainless Cover,
Valve & Quick Connect
B-VENT
1.2” air-space.
Aluminum inner liner.
Galvalume outer casing.
1” clearance to combustibles.
Approved for exterior use (must be enclosed up to roof line).
Twist-Lock coupler for easy assembly/disassembly.
Where screws are recommended, use 3/8” sheet metal
screws.
●● Listed to ULC S0605 and ULI 441.
●●
●●
●●
●●
●●
●●
●●
ADJUSTABLE LENGTHS
●● Simply slides over another pipe length (Note: do not use over an Elbow or Tee).
●● Available in 6” and 12” adjustable lengths.
●● Includes Pipe Clamp.
90 DEGREE ELBOW
45 DEGREE ELBOW
●● Used to offset pipe around
construction obstacles.
●● Three piece adjustable elbow twists
for easy offsets.
STANDARD & REDUCTION TEES
●● Used to transition system from
horizontal to vertical orientation.
●● Provides easy access for
inspection and maintenance.
●● Tee Cap sold separately.
●● Used to orient pipe between vertical and
horizontal orientation.
●● Four piece adjustable elbow twists for easy
offsets.
SUPPORT ASSEMBLY
●● Used to support pipe from the ceiling joist.
●● Supports up to 60’ of pipe.
●● Centres pipe between floors and
maintains 1” air-space clearance.
●● Installed above the joist.
●● Collar is pre-attached to support plate.
STORM COLLAR
WALL BAND
●● Used to stabilize the pipe against an
outside wall.
●● Must be installed just above the Tee
and every 6’ thereafter.
●● Used to provide a weatherproof seal to pipe
above roof line.
●● Seal inner edge with hi-temp silicone
sealant.
DRAFT HOOD CONNECTOR
RAIN CAP
●● Designed to prevent rain & snow from
entering the pipe.
●● Twist lock coupler design.
REVERSE DRAFT HOOD CONNECTOR
●● Connects B Vent to C Vent.
●● Used to connect pipe to single wall.
●● Connects C Vent to B Vent.
●● Used to connect pipe to draft hood at
appliance.
FIRESTOP SPACER
●● Used to protect combustible materials
where the pipe passed through a ceiling
or wall.
●● Can be installed above or below joist.
STOCK SIZES AVAILABLE FROM 3” - 14”
LARGER SIZES ARE CUSTOM ORDERS
71
THERMOSTATS
SINGLE STAGE - PROGRAMMABLE
PART NUMBER
1F97-1277
1F80-0471
DESCRIPTION
1H/1C 7 Day 5+1+1 day - Horizontal
- Blue 12” Touchscreen
1H/1C 5/1/1 OR 5/2 - Horizontal
- Blue 4”
1E78-151
1H/1C 5-2 day - Vertical
1F78-151
1H/1C 5+2 day - Horizontal
1F97-1277
1E78-151
1F78-151
1F80-0471
SINGLE STAGE - NON-PROGRAMMABLE
PART NUMBER
DESCRIPTION
1F86-0471
1H/1C - Horizontal - Blue 4”
1F78-144
1H/1C - Horizontal
1E78-144
1H/1C - Vertical
1F78-140
Heat Only - Vertical
1F86-0471
1E78-144
1F78-140
1F78-144
UNIVERSAL - PROGRAMMABLE
PART NUMBER
1HDEZ-1521
1F95-1291
1F95-1277
1F95EZ-0671
1F85-0477
72
1F85-0422
DESCRIPTION
Single Stage - Heat Pump 4H/2C - Multi-Stage 2H/2C
Humidification/Dehumidification Control - 4 Wire
5+1+1 7 Day - Blue 12” Touchscreen
Humidification/Dehumidification Control
5+1+1 7 Day - Blue 12” Touchscreen
7 Day - Blue 6” Touchscreen
5+1+1 7 Day - Blue 4”
5+1+1 5+2 Day - Blue 4”
1HDEZ-1521
1F95-1291 / 1F95-1277
1F95EZ-0671
1F85-0477 / 1F85-0422
THERMOSTATS
UNIVERSAL - NON-PROGRAMMABLE
PART NUMBER
1F83-0471
1F83-0422
DESCRIPTION
Single Stage - Heat Pump 3H/2C
- Multi-Stage 2H/2C Blue 4”
Single Stage - Heat Pump 2H/1C
- Multi-Stage 2H/2C Blue 4”
1F83-0471 / 1F83-0422
PROGRAMMABLE/NON PROGRAMMABLE WIFI MULTI-STAGE
Thermostat with remote access
from smartphone, tablet or PC
PART NUMBER
DESCRIPTION
1F86U-42WF
Program/Non Programmable WIFI - Universal 1H/1C
Multi-Stage 2H/2C - Heat Pump 3H/2C
THERMOSTAT GUARDS
PART NUMBER
DESCRIPTION
77-PG6
Thermostat Guard Plastic - 5.25” x 4.62” x 3.12”
77-PG9
77-PG12
73
BLACK MALLEABLE PIPE & FITTINGS
ELBOWS
SIZE
ELBOW
REDUCING
ELBOW
3/8”
3/8” x 90 Deg
-
1/2”
1/2” x 45 Deg.
1/2” x 90 Deg.
1/2” - 3/8” x 90 Deg.
3/4”
3/4” x 45 Deg.
3/4” x 90 Deg.
3/4” - 3/8” x 90 Deg.
3/4” - 1/2” x 90 Deg.
1”
1” x 45 Deg.
1” x 90 Deg
1” - 1/2” x 90 Deg.
1” - 3/4” x 90 Deg.
1-1/4”
1-1/4” x 45 Deg.
1-1/4” x 90 Deg.
1-1/4” - 1/2” x 90 Deg.
1-1/4” - 3/4” x 90 Deg.
1-1/4” - 1” x 90 Deg.
1-1/2”
1-1/2” x 45 Deg.
1-1/2” x 90 Deg.
1-1/2” - 1/2” x 90 Deg.
1-1/2” - 3/4” x 90 Deg.
1-1/2” - 1” x 90 Deg.
1-1/2” - 1-1/4” x 90 Deg
2” x 45 Deg.
2” x 90 Deg
2” - 3/4” x 90 Deg.
2” - 1” x 90 Deg.
2” - 1-1/4” x 90 Deg
2” - 1-1/2” x 90 Deg
2”
BLACK PIPE
Black Steel Pipe 1/2” dia. x 126” Lng. Threaded
Black Steel Pipe 3/4” dia. x 126” Lng. Threaded
Black Steel Pipe 1” dia. x 126” Lng. Threaded
Black Steel Pipe 1-1/4” dia. x 126” Lng. Threaded
Black Steel Pipe 1-1/2” dia. x 126” Lng. Threaded
Black Steel Pipe 2” dia. x 126” Lng. Threaded
TEE
SIZE
1/2”
3/8”
1 1/2” - 6”
1/2”
1 1/2” - 8”
3/4”
1 1/2” - 8”
1”
1” - 8”
1-1/4”
2” - 6”
1-1/2”
2” - 6”
2”
2 1/2” - 6”
3/4” x 3/4” x 1/2”
3/4” x 1/2” x 1/2”
3/4” x 1/2” x 3/4”
1”
1” x 1/2” x 1/2”
1” x 3/4” x 3/4”
1” x 1” x 1/2”
1” x 1” x 3/4”
1-1/4”
1-1/4” x 1” x 1”
1-1/4” x 1-1/4” x 1/2”
1-1/4” x 1-1/4” x 3/4”
1-1/4” x 1-1/4” x 1”
1-1/2”
1-1/2” x 1-1/2” x 1/2”
1-1/2” x 1-1/2” x 3/4”
1-1/2” x 1-1/2” x 1”
2”
2” x 2” x 1”
2” x 2” x 1-1/4”
COUPLINGS
REDUCING
SIZE
COUPLING
3/8”
3/8” - 1/4”
SIZE
1/2”
1/2” - 1/4”
1/2” - 3/8”
1/2” - 1/4”
1/2” - 3/8”
3/4”
3/4” - 1/2”
1”
1” - 1/2”
1” - 3/4”
1-1/4”
1-1/4” - 3/4”
1-1/4” - 1”
1-1/2”
1-1/2” - 3/4”
1-1/2” - 1”
1-1/2” - 1-1/4”
2”
2” - 3/4”
2” - 1”
2” - 1-1/4”
2” - 1 1/2”
BUSHINGS
UNIONS
SIZE
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
74
2”
1/2” x 1/2” x 3/8”
3/4”
NIPPLES
SIZE LENGTHS
TEES
REDUCING
TEE
3/4” - 1/2”
1” - 1/2”
1” - 3/4”
1-1/4” - 1/2”
1-1/4” - 3/4”
1-1/4” - 1”
CAPS
SIZE
3/8”
1/2”
3/4”
1”
1-1/2” - 1”
1-1/2” - 1-1/4”
1-1/4”
2” - 1/2”
2” - 1”
2”
1-1/2”
PVC PIPE & FITTINGS
FEATURES
●● Fully Certified to ULC S636
●● System 636® PVC is rated for flue gas temperatures up to and including 65ºC
PART NUMBER
DESCRIPTION
PVCP-32-120
Pipe PVC 2” dia. x 120” Lng. System 636
PVCP-48-120
Pipe PVC 3” dia. x 120” Lng. System 636
PART NUMBER
PART NUMBER
DESCRIPTION
PVCE-32-45
Elbow PVC 2” x 45 deg. (Slip x Slip)
PVCE-32-90-LT
Elbow PVC 2” x 90 deg. Lng. Trn. (Slip x Slip)
PVCE-48-45
Elbow PVC 3” x 45 deg. (Slip x Slip)
PVCE-48-90-LT
Elbow PVC 3” x 90 deg. Lng. Trn. (Slip x Slip)
DESCRIPTION
PVCC-32
Coupling PVC 2” dia. (Slip x Slip)
PVCC-48
PVCC-64
PVCRI-32-24
Coupling Red/Inc. 2” x 1-1/2” dia.
PVCRI-48-32
Coupling Red/Inc. 3” x 2” dia.
PART NUMBER
DESCRIPTION
PVCT-32
Tee PVC 2” dia. (Slip x Slip x Slip)
PVCT-32-32-12
Tee PVC 2” x 2” x 1-1/2”
PVCT-48-48-24
Tee PVC 3” x32” x 1-1/2”
PART NUMBER
DESCRIPTION
PVCB-24-08
Bushing PVC SP Red 1 1/2” x 1/2” Sp x Hose Barb (5/8” OD)
PVC-TESTPLUG
Testing Plug & Bushing Kit
PART NUMBER
DESCRIPTION
PVCHVK-32
Horizontal Vent Wall Termination Kit 2” dia.
PVCHVK-48
Horizontal Vent Wall Termination Kit 3” dia.
PVCVK-32
Concentric Vent Kit 2” x 16” Lng.
PVCVK-48
Concentric Vent Kit 3” x 20” Lng.
75
PVC PIPE AND FITTINGS
PART NUMBER
DESCRIPTION
PVCP-08-120
Pipe PVC 1/2” dia. x 120” Lng.
PVCP-12-120
Pipe PVC 3/4” dia. x 120” Lng.
PART NUMBER
DESCRIPTION
PVCA-FIPTS-08
Adapter Straight PVC 1/2” (FIPT x SOC)
PVCA-FIPTS-12
Adapter Straight PVC 3/4” (FIPT x SOC)
PVCA-IS-08
Adapter Straight PVC 1/2” (Insert x SOC)
PVCA-IS-12
Adapter Straight PVC 3/4” (Insert x SOC)
PVCC-08
Coupling PVC 1/2” dia. (Slip x Slip)
PVCC-12
Coupling PVC 3/4” dia. (Slip x Slip)
PVCE-08-45
Elbow PVC 1/2” x 45 deg. (Slip x Slip)
PVCE-08-90
PVCE-12-45
PVCE-12-90
PVCT-08
Tee PVC 1/2” dia. (Slip x Slip x Slip)
PVCT-12
Tee PVC 3/4” dia. (Slip x Slip x Slip)
PART NUMBER
196040
76
DESCRIPTION
Cement PVC 473 ml (1 Pint) Medium Bodied Grey (Sys. 636)
PVCT-32-32-12
Cement PVC 946 ml (1 Quart) Medium Bodied Grey (Sys. 636)
PVCT-48-48-24
Cement Transition PVC/CPVC/ABS 473 ml (1 Pint) System 636
COPPER TUBING & FITTINGS - STRAIGHT LENGTHS
PART NUMBER
CTP-08-144
CTP-12-144
ACRP-06-144
ACRP-08-144
ACRP-10-144
ACRP-12-144
ACRP-16-144
ACRP-18-144
ACRP-22-144
DESCRIPTION
Tubing Copper Plumbing 1/2” x 144” Lng.
(Type M)
Tubing Copper Plumbing 3/4” x 144” Lng.
(Type M)
Tubing Rigid Copper Refrigerant 3/8” OD
x 144” Lng. (Type L)
Tubing Rigid Copper Refrigerant 1-1/8”
OD x 144” Lng. (Type L)
Tubing Rigid Copper Refrigerant 1-3/8”
OD x 144” Lng. (Type L)
COPPER TUBING & FITTINGS - ROLLS
PART NUMBER
DESCRIPTION
CTG-08-50
Tubing Copper Gas 1/2” x 50’ Roll
CTG-10-50
Tubing Copper Gas 5/8” x 50’ Roll
CTR-04-50
Tubing Copper Refrigerant 1/4” x 50’ Roll
CTR-06-50
CTR-08-50
CTR-10-50
CTR-12-50
CTR-14-50
CTR-18-50
Tubing Copper Refrigerant 1-1/8” x 50’ Roll
FEATURES
●● Copper and Polyethylene composite tubing developed for Natural Gas
(NG) and Liquified Petroleum Gas (LPG) applications.
●● Appropriately sized for fuel-gas applications.
●● Comprised of type L/G soft copper tube that is coated with a
continuous seamless layer of yellow polyethylene.
May be safely installed ineither low pressure (LP) or elevated
pressure (EP) distribution systems.
PART NUMBER
DESCRIPTION
CTGU-08-60
Tubing Copper Gas Underground 1/2” x 60’ Roll
77
COPPER REFRIGERATION FITTINGS
PART NUMBER
DESCRIPTION
ACRE-06-90-LT
Elbow Refigerant 3/8” x 90 deg. Lng. Trn.
ACRE-08-90-LT
ACRE-10-90-LT
ACRE-12-90-LT
ACRE-14-90-LT
ACRES-06-90-LT
Elbow Refigerant 3/8” x 90 deg. Lng. Trn. Street
ACRE-STR-10-90-LT
ACRE-STR-12-90-LT
ACRE-STR-14-90-LT
PART NUMBER
DESCRIPTION
ACRC-04
Coupling Refrigerant 1/4” dia.
ACRC-06
ACRC-08
ACRC-10
ACRC-12
ACRC-14
PIPE INSULATION
PART NUMBER
78
DESCRIPTION
AF204
Armaflex Insulation 1/4” I.D. x 72” Lng.
AF206
AF208
AF210
AF212
AF214
AF218
Armaflex Insulation 1-1/8” I.D. x 72” Lng.
AF234
AF250
CHROME PLATED BALL VALVES
PART NUMBER
DESCRIPTION
PEX1/2BARBV
Pex MB ValveBB 1/2 Straight
PEX3/4BARBV
Pex MB ValveBB 3/4 Straight
PEXBUS-OB-06
Pex MB ValveST B-COM 1/2x3/8
PEXBVA-08-04
Pex Humidif Valve1/2x1/4 Straight
PEXBVA-08-06
Pex MB ValveAG B-COM 1/2x3/8
PEXBVHB-08
Pex MB ValveAG B-Hose 1/2
PEXBVS-08-04
Pex Humidif Valve1 12x1 14 Angle
BRASS BALL VALVES
PART NUMBER
DESCRIPTION
GSOVI-08
Shut Off Valve Gas (indoor) 1/2” dia.
GSOVI-12
Shut Off Valve Gas (indoor) 3/4” dia.
GSOVO-08
Shut Off Valve Water/Oil/Gas (outdoor) 1/2” dia.
GSOVO-12
Shut Off Valve Water/Oil/Gas (outdoor) 3/4” dia.
GSOVO-16
Shut Off Valve Water/Oil/Gas (outdoor) 1” dia.
GSOVO-20
Shut Off Valve Water/Oil/Gas (outdoor) 1 1/4” dia.
GSOVO-24
Shut Off Valve Water/Oil/Gas (outdoor) 1 1/2” dia.
GSOVO-32
Shut Off Valve Water/Oil/Gas (outdoor) 2” dia
PEXBVB-08
Ball Valve Pex - Brass 1/2”
PEXBVB-12
Ball Valve Pex - Brass 3/4”
PART NUMBER
DESCRIPTION
DS60NF
Disconnect Switch 60A Non-Fusible
U065P
Disconnect Switch 60A Non-Fusible
ACWK-08-72
Whip Kit for A/C 1/2” dia. x 72” Lng.
LTSC-08
Liquidtite Straight Connector 1/2” dia.
LTSC-12
Liquidtite Straight Connector 3/4” dia.
LTE-08-90
Liquidtite Connector 1/2” x 90 deg.
LTE-12-90
Liquidtite Connector 3/4” x 90 deg.
LT-08-30
Liquidtite 1/2” x 30M RoIl
LT-12-30
Liquidtite 3/4” x 30M RoIl
79
CONDENSATE PUMPS
PART NUMBER
DESCRIPTION
VCMA-15ULS
VCMA-I5ULST
CP-22
Condensate Pump clw Safety Switch -115/1/60
Condensate Pump c/w Safety Switch & Tubing -115/1/60
Condensate Pump -120/1/60 (Diversitech)
CP-22T
Condensate Pump -120/1/60 c/w Tubing (Diversitech)
EQUIPMENT PADS & WALL BRACKETS
PART NUMBER
DESCRIPTION
PSLW24
PSLW30
PSLW36
VPR33
Patio Stone Light Weight 24” sqre.
Vibration Pad Rubber 3” x 3” x 7/8”
VPR44
VPRSR33
VPRSR44
ACWBS3016
ACWBS361S
Vibration Pad Rubber 4” x 4” x 7/8”
Vibration Pad Rubber Steel Rubber 3” x 3”
Vibrallon Pad Rubber Steel Rubber 4” x 4”
A/C Standard Wall Brackets (left & right) 30” x 16”
AlCStandard Wall Brackets (left & right) 36” x 18”
PIPE HANGERS
PART
NUMBER
PART
NUMBER
BHA-08
BHA-12
BHA-16
BHA-20
BHA-24
BHA-32
PART
NUMBER
80
TCG-08
TCG-08-1
TCG-12
TCG-12-1
TCG-16
TCG-16-1
CH-08
CH-12
CH-16
CH-20
CH-24
CH-32
DESCRIPTION
Band Hanger Adjustable 1/2”
Band Hanger Adjustable 3/4”
Band Hanger Adjustable 1”
Band Hanger Adjustable 1-1/4”
Band Hanger Adjustable 1-1/2”
Band Hanger Adjustable 2”
DESCRIPTION
Tin Clip Galv. 1/2” dia. - 2 Hole
Tin Clip Galv. 1” dia. - 2 Hole
DESCRIPTION
Clevis Hanger 1/2” dia.
Clevis Hanger 3/4” dia.
Clevis Hanger 1” dia.
Clevis Hanger 1-1/4” dia.
Clevis Hanger 1-1/2” dia.
Clevis Hanger 2” dia.
PART NUMBER
VHL-08
VHL-12
VHL-16
VHS-08
VHS-12
VHS-16
VHS-20
VHS-24
VHS-32
PART
NUMBER
TCG-20
TCG-20-1
TCG-24
TCG-24-1
TCG-32
TCG-32-1
DESCRIPTION
Valley Hanger Long (3/4” CP - 1/2” IP)
Valley Hanger Long (1” CP - 3/4” IP)
Valley Hanger Long (1-1/4” CP - 1” IP)
Valley Hanger Short (3/4” CP - 1/2” IP)
Valley Hanger Short (1” CP - 3/4” IP)
Valley Hanger Short (1-1/4” CP - 1” IP)
Valley Hanger Short (1-1/2” CP - 1-1/4” IP)
Valley Hanger Short (2” CP - 1-1/2” IP)
Valley Hanger Short (2” IP)
DESCRIPTION
Tin Clip Galv. 1-1/4” dia. - 2 Hole
TUBING
PART NUMBER
DESCRIPTION
CDT-04-I00
Clear Drain Tubing 1/4” dia. x 100’ Roll
CDT-06-I00
CDT-08-I00
CDT-10-I00
CDT-12-I00
CDTB-10-I00
Clear Braided Tubing 5/8” ID x 7/8” OD x 100’ Roll
BDT-08-I00
Black Drain Tubing 1/2” dia. x 100’ Roll
BDT-12-I00
Black Drain Tubing 3/4” dia. x 100’ Roll
POLY FITTINGS
PART
NUMBER
PART
NUMBER
DESCRIPTION
DESCRIPTION
PE-08-90
Elbow Poly 1/2” x 90 deg. (Insert x Insert)
PAS-MIPTI-12-08 Adapter Poly 3/4” MIP x 1/2” Slip Str. (5/8”)
PE-08F-08101-90
Elbow Poly 1/2” FIPT x 1/2” (5/8”)
Insert 90 deg.
PC-08
PE-12-90
Elbow Poly 3/4” x 90 deg. (Insert x Insert)
PC-12
Coupling Poly 3/4” dia. (Insert x Insert)
PC-12-08
Coupling Poly 3/4” x 1/2” dia.
(Insert x Insert)
PT-08
Tee Poly 1/2” dia. (Insert x Insert)
Elbow Poly 3/4” FIPT x 1/2” (5/8”)
PE-12F-08101-90
Insert 90 deg
Elbow Poly 3/4” MIPT x 1/2” (5/8”)
PE-12M-08101-90
Insert 90 deg.
PE-12M-121-90
PAS-MIPTI-08
Coupling Poly 1/2” dia. (Insert x Insert)
Elbow Poly 3/4” MIPT x 3/4” Insert 90 deg. PT-12
Tee Poly 3/4” dia. (Insert x Insert)
Adapter Poly 1/2” MIP x Insert
Tee Poly 3/4” x 3/4” x 1/2”
(Insert x Insert x Insert)
PT-12-12-08
THREADED ROD
PART
NUMBER
DESCRIPTION
TRZ-06-120
Threaded Rod Zinc 3/8” x 120” Lng.
SLOTTED/SOLID CHANNELS
PART
NUMBER
DESCRIPTION
USC-14-26-120
Solid Channel 7/8” x 1-5/8” x 10’ Long
USSC-26-26-120
Slotted Channel - 1-5/8” x 1-5/8” x 10’ Long
USSN-06
Channel Spring Nut - 3/8” Short
USSN-06-L
Uni-Strut Channel Spring Nut - 3/8” Long
81
TAPE
PART
NUMBER
DESCRIPTION
20502
2 1/2” Red Plastic Tuck Tape
FTA250
Aluminum Foil Tape 2” x 50 Yrd. 45mm Roll
FTA350
Aluminum Foil Tape 3” x 50 Yrd. 72m Roll
DTB260
Duct Tape Black 2” x 60 yrds.
DTG260
Duct Tape Grey 2” x 60 yrds.
DTY260
DuctTape Yellow 2” x 60 yrds.
ETB1260
Electrical Tape Black 3/4” x 60’ Roll
GT1
Industrial Painters Tape -Green 1”
GT1.5
Industrial Painters Tape -Green 1.5”
INSULATION
PART
NUMBER
●●
●●
●●
●●
●●
82
DESCRIPTION
FBI-16-24-48
Insulation FSK Fibre Board - 1” x 24” x 48”
FBI-16-48-100
Insulation Foil Back - 1” x 48” x 100’ Roll
FBI-24-48-100
Insulation Foil Back - 1-1/2” x 48” x 100’ Roll
FBI-56-48-50
Insulation Foil Back - 3-1/2” x 48” x 50’ Roll
High Quality sheet metal alternative for constructing return air ducts between joists and studs.
Reduces duct noises.
Requires no shop fabrication.
Re-cut sheets.
Staples easily and quickly, saving labour costs.
PART NUMBER
DESCRIPTION
THERMO-PAN-16X47-1/2
Thermo-Pan Sheet 16” x 47 1/2”
ACCESS DOORS
PART
NUMBER
DESCRIPTION
EA0606
Access Door Drywall 6” x 6”
EA0808
EA1010
EA1212
EA1414
EA1616
EA2424
PART
NUMBER
DESCRIPTION
ADDMH0606
Access Door Duct Mntd. Hinged
6” x 6”
PART
NUMBER
DESCRIPTION
ADDMH0808
8” x 8”
ADDWFR1212
Access Door Drywall Fire Rated
Hinged 12” x 12”
ADDMH1010
10” x 10”
ADDWFR1414
ADDMH1212
12” x 12”
ADDWFR1616
ADDMH1414
14” x 14”
ADDWFR1818
ADDMH1616
16” x 16”
ADDWFR2424
ADDMH2424
24” x 24”
SILICONE SPRAY PAINT
PART
NUMBER
DESCRIPTION
71064
Silicone Light Grey Firestop Wall & Floor - 300ml
73366
Silicone Grey II Concrete & Masonry - 300ml
73485
Silicone Aluminum Rubber - 300ml
74202
Silicone Foam Tan Polyurethane Insulation Sealant - 680g
74233
Silicone White Acrylic Latex Plus - 300ml
74235
Silicone Clear Acrylic Latex Plus - 300ml
74239
Silicone Grey Acrylic Latex Plus - 300ml
74245
Silicone Brown Acrylic Latex Plus - 300ml
PART
NUMBER
DESCRIPTION
7-4000
Silicone Clear - 305ml
7-4100
Silicone White - 305ml
7-4200
Silicone Aluminum - 305ml
7-4300
Silicone Hi-Temp Red - 305ml
7-4400
Silicone Clear Acrylic Latex - 305ml
83
SPRAY PAINT
PART
NUMBER
DESCRIPTION
16246
Spray Paint - Aluminum
16238
Spray Paint - Appliance White
16241
Spray Paint - Bright Yellow
16247
Spray Paint - Dark Gray
16237
Spray Paint - Flat Black
81012
Spray Paint - Orange
16066
Spray Paint - Zinc Galvanized
DUCT SEALER
PART
NUMBER
EVERSEAL1
Duct Sealer Industrial Grade (Ductmate)
DWN-1
Duct Sealer Water Base - 4L Pail (Duro Dyne)
DWN-C
Duct Sealer Water Base - Tube (Duro Dyne)
WB-S2
Duct Sealer Water Based - 4L Pail (Duro Dyne)
WB-S2T
Duct Sealer Water Based - Tube (Duro Dyne)
HARDWARE & ACCESSORIES
PART NUMBER
84
DESCRIPTION
DESCRIPTION
ESO-38-100
Square Duct Standoff Regulator - 3/8” Handle
ESO-38R-100
Round Duct Standoff Regulator - 3/8” Handle
K-2
Regulator & Quadrant - 1/4”
K-3
Regulator & Quadrant - 3/8”
KP-6
End Bearing - 1/4”
KP-7
KP-8
KP-8S
End Bearing Square - 1/4”
KS-12
Damper Quadrant Set - 1/2”
RB-50
Rapit Regulator Single
SL-1
Sash Lock
SRP-14
Ball Joint - 1/4”
SRP-516
Ball Joint - 5/16”
SCREWS
PART
NUMBER
DXB-1034
DESCRIPTION
Screws Hex. Head - #10 x 3/4” (5,000 pcs. Bulk Pk.)
DXT-1034
Screws Hex. Head - #10 x 3/4” -Self Drill Zinc (1M/Pk.)
DXT-812
Screws Hex. Head - #8 x 1/2” - Self Drill Zinc (1M/Pk.)
SDUB8X1/2
Screws Socket Head - #8 x 1/2” - Saber Point (14M/Pk.)
SDUT8X/2
Screws Socket Head - #8 x 1/2” - Saber Point (1M/Pk.)
SDXT-812
Screws Socket Head - #8 x 1/2” -Self Drill Zinc (1M/Pk.)
PART
NUMBER
DESCRIPTION
1BSTGA16
Hanger Strap-in-a-box 16 GA x 1” x 100’ Roll
1BSTGA20
1bstga22
1BSTGA24
WR10500
Wire Steel Cable/Rope #10 (500 ft./Spool)
Breaking Load 826 lbs.
WR20500
Wire Steel Cable/Rope #20 (500 ft./Spool)
Breaking Load 1,697 lbs.
CL10
Clutcher for #10 Wire (10 pcs./bag)
CL-20
Clutcher for #20 Wire (10 pcs./bag)
FLEXIBLE DUCT CONNECTOR
PART
NUMBER
DESCRIPTION
JRX-100
Flexible Duct Connector ( 1-3/4” x 3” x 1-3/4”) 28 GA. Canflex
MFN-100
Flexible Duct Connector (3” x 3” x 3”) 24 GA. Neoprene
MFN-444
MFN-50
MFX-100
Flexible Duct Connector (3” x 3” x 3”) 24 GA. Canflex
MFX-50
Flexible Duct Connector (3” x 3” x 3”) 24 GA. Canflex
PART NUMBER
DESCRIPTION
ELBGS044524
Elbow Galv. Stamped 4” x 45 deg. 24 GA.
ELBGS049024
ELBGS064524
ELBGS069024
ELBGS084524
BG03CA
Blast Gate 3” dia. Cast Aluminum
ELBGS089024
BG04CA
ELBGS104524
BG05CA
ELBGS109024
BG06CA
ELBGS124524
BG07CA
BG08CA
ELBGS129024
BG09CA
PART
NUMBER
DESCRIPTION
85
PART
NUMBER
SB-22182
SB-22186
SB-22222
SB-22185
PART
NUMBER
SB-U248
SB-22186
SB-22222
SB-22185
DESCRIPTION
Sharkbite Ball Valve - 1/2” x 1/2” FNPT
Sharkbite Ball Valve - 3/4” x 3/4” FNPT
Sharkbite Ball Valve - 1/2” x 1/2”
Sharkbite Ball Valve - 3/4” x 3/4”
DESCRIPTION
Sharkbite Elbow 90 deg. - 1/2” x 1/2”
Sharkbite Elbow 90 deg. - 1/2” x 1/2” MNPT
Sharkbite Elbow 90 deg. - 3/4” x 3/4”
Sharkbite Reducing Elbow 90 deg. - 3/4” x 1/2”
PART
NUMBER
PART
NUMBER
SB-U362
SB-U370
SB-U412
SB-U444
SB-U454
DESCRIPTION
Sharkbite Tee 1/2” x 1/2” x 1/2”
Sharkbite Tee 3/4” x 3/4” x 3/4”
Sharkbite Reducing Tee 3/4” x 3/4” x 1/2”
SB-U008
SB-U3008
SB-0016
SB-U3016
SB-U058
PART
NUMBER
PART
NUMBER
SB-U514
SB-U518
PART
NUMBER
86
DESCRIPTION
Sharkbite End Cap 1/2”
Sharkbite End Cap 3/4”
DESCRIPTION
SB-U072
SB-U120
SB-U3016
SB-U134
SB-U068
SB-U116
DESCRIPTION
Sharkbite Coupling - 1/2” x 1/2”
Sharkbite Slip Coupling - 1/2”
Sharkbite Coupling - 3/4” x 3/4”
Sharkbite Slip Coupling - 3/4”
Sharkbite Reducing Coupling - 3/4” x 1/2”
DESCRIPTION
Sharkbite Straight Connector - 1/2” x 1/2” FNPT
Sharkbite Straight Connector - 1/2” x 1/2” MNPT
Sharkbite Straight Connector - 3/4” x 3/4” FNPT
Sharkbite Straight Connector - 3/4” x 3/4” MNPT
Sharkbite Reducing Connector - 1/2” x 3/4” FNPT
Sharkbite Reducing Connector - 1/2” x 3/4” MNPT
PART
NUMBER
DESCRIPTION
SG242550
Strapping 24 GA 25’ x 1/2”
C04L
Cutting Oil - 1 gal. Bottle
SG242575
Strapping 24 GA. 25’ x 3/4”
LD227
Leak Detector - Applicator Bottle
ST221050COATED
Coated Strapping 22 GA 10’ x 1/2”
LD4L
Leak Detector - Re-fill Bottle 4L
SP454
Soldering Paste (1 lb./tub)
HVLC946
HVAC Liquid Cleaner
PD250BT
Pro-Dope Brush Top 250 ml
MS72
Scubs-in-Bucket
PD500BT
Pro-Dope Brush Top 500 ml
tib540v
Teflon Tape - 1/2”
CO1L
Cutting Oil - Applicator Bottle
TYB260
Yellow “T” Tape - 1/2”
BELTS / BUSHINGS / PULLEYS
‘A’ V-BELTS
A22 THROUGH A80
‘4L’ V-BELTS
4L200 THROUGH 4L600
‘B’ V-BELTS
B30 THROUGH B107
BLOWER PULLEYS
PART
NUMBER
DESCRIPTION
XBK40H
Blower Pulley (Bush. Req’d.) 3.95” O.D. Fix S/Groove
XBK50H
XBK60H
XBK70H
XBK80H
XBK90H
XBK100H
XBK110H
BUSHINGS
PART NUMBER
DESCRIPTION
H-3/4
Bushing 3/4” (Blower)
H-1
Bushing 1” (Blower)
H-1 3/16
Bushing 1-3/16” (Blower)
H-1 7/16
Bushing 1-7/16” (Blower)
MOTOR PULLEYS
PART NUMBER
DESCRIPTION
XVL34-1/2
Motor Pulley 1/2” Bore x 3.15” OD. Var. S/Groove
XVL34-5/8
XVL40-1/2
XVL40-5/8
XVL44-7/8
87
ELECTRICAL WIRE
PART
NUMBER
DESCRIPTION
PART
NUMBER
DESCRIPTION
FT6182
Wire T-Stat Fire Protection 18-275M Roll
TSW182
Wire T-Stat LVT 18-2 Brown 75M Roll
FT6183
TSW182
FT6184
TSW182
FT6185
TSW182
FT6186
TSW182
FT6188
TSW182
PART NUMBER
DESCRIPTION
ACBX102
Wire Amour Clad BX 10-275M Roll
ACBX122
ACBX142
RW102
Wire Romex 10-2 (75M Roll)
RW122
Wire Romex 12-2 (75M Roll)
BONDING WIRE
Bonding Wire - 6 AWG Bare Copper (76M Roll)
MOTORS
UNIVERSAL RESCUE MOTOR
PART
NUMER
5460
5462
5464
5465
5470
HP
VOLTS
AMPS
RPM
BEARING
1/2 - 1/6
1/2 - 1/6
1/3 - 1/6
1/2 - 1/5
3/4 - 1/5
115
208/230
208/230
208/230
115
7.3
2.6
1.9/1.2
3/1.3
8.1
1075
1075
825
1075
4/1075
Sleeve
Sleeve
Sleeve
Sleeve
Ball
BELTED FAN AND BLOWER
PART
NUMBER
HP
VOLTS
AMPS
RPM
BEARING
840CV
1/4
115
5.3
1725
Ball
841CV
1/3
115
6.4
1725
Ball
1542C
1/2
115
8.0
1725
Ball
PART
NUMBER
88
1859
1860
1861
1862
CONDENSER FAN MOTOR
HP
VOLTS
AMPS
RPM
BEARING
1/8
1/4
1/3
1/2
208-230
208-230
208-230
208-230
1.0
1.5
2.0
3.1
1725
1725
1130
1725
Sleeve
Sleeve
Sleeve
Sleeve
BELIMO ACUATORS
TECHNICAL DATA
TECHNICAL
DATA
LF120 (-S)
Power Supply
120 VAC ± 10%
50/50 Hz
Power Consumption
Running: 5.5 W
Holding: 3.5 W
Transformer Sizing
7.5 VA
Electrical Connection
3 ft. 18 GA appliance cable (-S models have 2 cables)
1/2” conduit connector
Overload Protection
Electronic throughout 0 to 95º rotation
Electrical Protection
Actuators are double insulated
Angle of Rotation
Max 95º, adjust with mechanical stop
Torque
35 in-lb. (4 Nm) constant torque
Direction of Rotation
Reversible with cw/ccw mounting
Position Indication
Visual indicator, 0º to 95º (0º is spring return position
Auxilliary Switch
(-S models)
1 x SPDT 3A (0.5A) @ 250 VAC, UL Listed. Adjustable
0º to 95º
Running Time
(nominal)
Motor: < 40 to 75 sec.
Spring: < 25 sec. @ -4ºF to +122ºF (-20ºC to +50ºC)
<60 sec. @ -22ºF (-30ºC)
LF24, LF24-S
Nominal Voltage
AC 24V 50/60 Hz, DC 24 V
Nominal Voltage
Range
AC 19.2...28.8 V, DC 21.6...28.8 V
For Wire Sizing
7 VA (Max 5.8 A @ 5 ms)
Power
Consumption
Motoring: 5 W
Holding: 2.5 W
Auxiliary Switch
(LF24-S) Switching Point
1 x SPDT 6 (1.5A) AC 250 V
Adjustable 0...100% <
Direction of
Rotation
Selected by mounting L/R
Torque
Motor: min. 4 Nm (at rated voltage)
Spring Return: min. 4 Nm
Angle of Rotation
Max. 95º (adjustable 37...100% < with built-in
mechanical stop)
Running Time
Motor: < 40...75 s (0...4 Nm)
Spring Return ≈ 20 s @ - 20...50ºC / Max. 60 s @
-30ºC
89
TECHNICAL DATA
AFBUP, AFBUP-S
Power Supply
24...240 VAC -20% / +10%, 50/60 Hz
24...125 VDC ±10%
Power Consumption
Running: 7 W
Holding: 3.5 W
Transformer Sizing
7.5 VA @ 24 VAC (class 2 power source)
8.5 VA @ 120 VAC
18 VA @ 240 VAC
AFBUP...
3 ft. 18 GA appliance cable, 1/2” conduit connector
-S Models: Two 3 ft. 18 GA appliance cables with
1/2” conduit connectors
Overload Protection
Control
On/Off
Torque
180 in-lb. (20 Nm) minimum
Mechanical Angle of
Rotation
95º (adjustable with mechanical end stop, 35º to 95º)
Running Time
Motor: < 75 sec.
Spring: 20 sec. @ -4ºF to 122ºF (-20ºC to +50ºC)
<60 sec. @ -22ºF (-30ºC)
Position Indication
Auxilliary Switch
AFBUP-S Model
2 x SPDT 3A (0.5A) @ 250 VAC, UL Approved.
One set at +10%, one adjustable 10º to 90º
TECHNICAL DATA
90
TFB120(-S)
Power Supply
Nominal: 100 to 240 VAC, 50/60 Hz
Tolerance: 85 to 265 VAC, 50/60 Hz
Power Consumption
Running: 2.5 W
Holding: 1.3 W
Transformer Sizing
5 VA (class 2 power source)
TFB120...
3 ft. 18 GA appliance cable, 1/2” conduit connector
-S Models: Two 3 ft. 18 GA appliance cables with
1/2” conduit connectors
Overload Protection
Angle of Rotation
Max. 95º, adjustable with mechanical stop
Torque
22 in-lb. (2.5 Nm) minimum
Position Indication
Running Time
Motor: < 75 sec.
Spring: < 25 sec. @ -4ºF to 122ºF (-20ºC to +50ºC)
< 60 sec. @ -22ºF (-30ºC)
Auxilliary Switch
1 x SPDT 3A (0.5A) @ 250 VAC, UL Approved.
Adjustable 0º to 95º
MOTOR SPEED CONTROLS
PART #
VOLTS
AMPS
DESCRIPTION
92-A8301
120
2.5
Std. Ctrl. Kit
92-A8303
120
5
Std. Ctrl. Kit
92-A8305
120
10
w/Heat Sink
Complete with control, knob, face plate & hardware.
CAPACITORS
Dual Voltage 370/440V • Single MFD • Round
PART NUMBER
MFD
36-5R3744
5
36-7R3744
7
36-10R3744
10
36-253R3744
25/3
36-255R3744
25/5
36-304R3744
30/4
36-305R3744
30/5
36-354R3744
35/4
36-355R3744
35/5
36-405R3744
40/5
36-455R3744
45/5
36-505R3744
50/5
GENERAL PURPOSE RELAYS
PART #
DESCRIPTION
D90-290Q
24 Volts - 16/8 AMP - SPST-NO
D90-291Q
120 Volts - 16/8 AMP - SPST-NO
D90-293Q
24 Volts - 8/8 AMP - SPDT
D90-294Q
120 Volts - 8/8 AMP - SPDT
91
CIRCUIT BREAKERS
92
PART NUMBER
DESCRIPTION
BREAKER-CUT-20
Circuit Breaker Cutler Hammer - 20A - 2 Pole
BREAKER-CUT-30
Circuit Breaker Cutler Hammer - 30A - 2 Pole
BREAKER-FED-20
Circuit Breaker Federal Pioneer - 20A - 2 Pole
BREAKER-FED30
Circuit Breaker Federal Pioneer - 30A - 2 Pole
BREAKER-SIE-20
Circuit Breaker Siemens - 20A - 2 Pole
BREAKER-SIE-30
Circuit Breaker Siemens - 30A - 2 Pole
BREAKER-SQ-20
Circuit Breaker Square D - 20A - 2 Pole
BREAKER-SQ-30
Circuit Breaker Square D - 30A - 2 Pole
PART NUMBER
DESCRIPTION
SW120
Switch White 20A-120V 1 Pole
RW15125
Receptacle White 15A-125V Duplex
GSB24
Utility Box Galv. Steel 2” x 4” Electrical
GSB44
Box Utility Galv. Steel 4” x 4” Electrical
GSCRS24
Receptacle Cover Single Duplex Galv. Steel 2” x 4”
GSCSS24
Switch Cover Single Galv. Steel 2” x 4”
PART #
DESCRIPTION
72B
Marrett Blue Wire Connector 22/16 AWG (100/bx)
73B
Marrett Orange Wire Connector 22/16 AWG (100/bx)
74B
Marrett Yellow Wire Connector 18/10 AWG (100/bx)
76B
Marrett Red Wire Connector 18/10 AWG (100/bx)
TOOLS & EQUIPMENT
TEST PRODUCTS INTERNATIONAL
PART
NUMBER
DESCRIPTION
265
Camp-On Meter with Frequency & Capacitance
315C
Calibratable Digital Thermometer
383
Infrared Thermometer
40
Low Voltage Tester (24 - 90V)
575C1
Digital Air Velocity Meter
620
Dual Digital Thermometer
719
Combustible Gas Detector
770
Carbon Monoxide Detector
A085BP
Test Leads w/Croc Clips & Back Probes
TURBOTORCH
PART
NUMBER
DESCRIPTION
0386-1226
Tank Key TK
NPK-TT
Nitrogen Purge Kit
245-03P
Nitrogen Purge Regulator 500 PSI
250-800-580
Nitrogen Purge Regulator 800 PSI
X-5MC
Air/Acetylene Kit - 1-1/2” Solder / 3/4” Silver - MC Tank
X-3B
Air/Acetylene Kit - 3” Solder / 1-5/8” Silver - B Tank
ARB
Acetylene Regulator
MCT
Acetylene Adapter B- MC Tank
93
TOOLS & EQUIPMENT
HVAC TOOLS
PART NUMBER
DESCRIPTION
2206-20
HVAC Fork Tester
2217-20
Milwaukee Digital Multimeter
2236-20
AC Clamp Meter/HVAC
POWER TOOLS
PART NUMBER
DESCRIPTION
2420-22
M12 Hackzall 12V Hand Saw Kit - Cordless
2470-21
PVC Shear Kit 12V - Cordless
2606-22CT
Compact Drill Kit 18V - Cordless
2620-22
Sawzall Kit c/w 2 XC Battery - 18V - Cordless
2682-22
Metal Saw Kit 5-3/8” - 18V - Cordless
5426-21
Rotary Hammer 1-3/4” SDS Max - Corded
6121-30
Angle Grinder 4-1/2” - Trigger Grip Lock On - Corded
6519-31
Sawzall 12A 1-1/8” w/Case - Corded
6852-20
Shear 18 GA, Sheet Metal - Corded
ACCESSORIES
94
PART
NUMBER
DESCRIPTION
PART
NUMBER
48-00-4787
Sawzall Blade 14T 9LG Ice Hardened Torch
48-20-5140
Thick Wall Core Bit 2-1/2”
48-00-4788
Sawzall Blade 18T 9LG Ice Hardened Torch
48-00-4788
Thick Wall Core Bit 4”
48-00-5184
Sawzall Blade 18T 6LG
48-00-5788
Left Cutting Aviation Snips
48-22-1910
Utility Knife
48-22-1910
Right Cutting Aviation Snips
48-00-5184
Ice Hardened Hole Saw Kit - 15 pcs.
48-22-1905
Straight Cutting Aviation Snips
DESCRIPTION
TOOLS & EQUIPMENT
PART
NUMBER
DESCRIPTION
22985
Red/Yellow/Blue 60” Long Hose c/w 45 deg. Fitting
29985
Red/Yellow/Blue 60” Long Hose c/w Ball Valve
42001
Red & Blue 2 Valve Manifold - No Hoses
R22/404A/410A
68802
Electronic Scale - 110 lbs.
95762
Recovery XLT Unit c/w Tank Over Fill Switch - 115/1/60
93560
Super Vac 6 cfm Pump
93192
Vacuum Pump Oil - One Quart Bottles
93194
Vacuum Pump Oil - One Gallon Jug
78086
Pressure Test Gauge 3-1/2” x 3/4” Pipe (0 to 100#)
95012
30 lb. Recovery Cylinder c/w Float Switch
95008
“Y” Valve for 30 lb. Recovery Tank
95
TOOLS & EQUIPMENT
PART
NUMBER
DESCRIPTION
DEB4
Deburr Tool 1-1/4” - 4”
DEB4-BLADE
Replacement Blade for DEB4
PART
NUMBER
PART
NUMBER
96
TC50SLR
C- Cutter 1/2”
TC75SLR
C- Cutter 3/4”
2PK-SLRCW
Replacement Wheel for C-Cutter (2 pk)
DESCRIPTION
TC1QP
Quick Release Cutter 1/8” - 1-5/16”
TC2QP
TC3QP
TC4QP
Quick Release Cutter 1-7/8” - 4-1/2”
PART
NUMBER
DESCRIPTION
PART
NUMBER
DESCRIPTION
RS1
One Hand Rachet Shears 1-1/4” IPS
RS2
Ratchet Shears 2” IPS
PART
NUMBER
DESCRIPTION
DESCRIPTION
PPS12
Plastic Pipe Saw 3”
PPS18
Plastic Pipe Saw 4”
TC3-6363SK
Tube Cutter Kit - c/w Deburring Tool &
Internal Pipe Cutter
STP710
Stud Punch 1-11/32”
TOOLS & EQUIPMENT
PART
NUMBER
TS1
Turbo Shear
TS1RB
Replacement Blade for Turbo Shear TS1
TSHD
Turbo Shear Heavy Duty
PART
NUMBER
PART
NUMBER
DESCRIPTION
DESCRIPTION
12F
Folding Tool - 12”
18F
3224F
DESCRIPTION
C5EV
Pipe Crimper - 5 Blade
DS2
Duct Stretcher Offset
N1EV
Hand Knotcher - 3/16”
S2EV
Hand Seamer - 3”
HHD1
Magnetic Long Handle Hollow Chuck Nut
Driver 1/4” Hex Head
HHD2
HHD3
PART
NUMBER
DESCRIPTION
AV1
Snips Left Cut - Aviation
AV2
Snips Right Cut - Aviation
AV3
Snips Straight, Left & Right Cuts - Aviation
AV6
Snips Left Offset Cut - Aviation
AV7
Snips Right Offset Cut - Aviation
97
SAFETY SUPPLIES
SAFETY GLASSES
PART
NUMBER
DESCRIPTION
SEP1051CBKSQ
Safety Glasses - Beretta Clear Lens
SEP1081SBKSQ
Safety Glasses - Brooklyn Smoke Lens
SEP1012CBKSQ
Safety Glasses - Clear Lens Anti-Fog
SEP2051CBKSQ
Safety Glasses Gun - Metal Frame Indoor/Outdoor Lens
SGC
Safety Glasses - Clear Frame/Lens
HAND PROTECTION
PART
NUMBER
GLOVE-R-SM
GLOVE-R-M
GLOVE-R-L
GLOVE -R-XL
98
DESCRIPTION
Gloves c/w Nitrite PVC Dots - Cut
Resistant - Small
Resistant - Medium
Resistant - Large
Resistant - X Large
PART
NUMBER
11CKRPLCLQ
11CKRPL-3W
710P-3W
711AQ
GLOVE-THERM-L
Thermal Cut Resistant Large Gloves
746Q
GLOVE-THERM-XL
Thermal Cut Resistant X-Large Gloves
11NKHLQ
DESCRIPTION
Black Poly Liner with Black Rubber
Palm Gloves
Cotton Polyester String Knit Blue
Rubber Palm Gloves (3 pk)
Split Leather Fitters Patch Palm
Gloves (3 pk)
Premium Split Leather Fitters Gloves
Split Leather Palm Cotton Back Knit
Wrist Gloves
Glove String Knit Poly/Cotton Large
Gloves
SAFETY SUPPLIES
HEAD PROTECTION
PART
NUMBER
DESCRIPTION
SHDHA6RQ
Hard Hat - Red
SHDHA6WQ
Hard Hat - White
SHDHA6YQ
Hard Hat - Yellow
FALL PROTECTION
PART
NUMBER
DESCRIPTION
SFP6SALQ
Lanyard 6” w/Shock Absorb Snap Hooks
SFPFBHQ
Full Body Harness w/Back D Ring
SFPHL6Q
Harness w/6” Lanyard Snap Hook Combo
SFPRK50FTQ
Roofer Kit - 50 ft.
RESPIRATORY PROTECTION
PART
NUMBER
DESCRIPTION
SRS1010V-1
Particulate Respirator w/Wxhalation Valve - Disposable
SRS871514Q
Half Mask P100 Filter Asbestos & Lead Respirator
SRSR871515Q
Replacement Cartridges P100 - Asbestos & Lead
SRS871517Q
Half Mask P95 Paint & Pesticide
SRSR871516Q
Replacement Cartridges and Filters P95 - Paint & Pesticides
TRAFFIC SAFETY
PART
NUMBER
DESCRIPTION
STC18W3Q
Traffic Cone (Pylon) 18”
STC28W5Q
Traffic Cone (Pylon) 28”
TV-9GL/XL
Traffic Vest HI VIZ 5 Point Tear-Away - Green
TV-90L/XL
Traffic Vest HI VIZ 5 Point Tear-Away - Orange
TPPTA012ONT
Stop/Slow Sign - 60” PVC Handle 18x18
99
SHEET METAL
SNAPLOCK
Available in the following gauges, sizes & lengths:
●● 26 Ga.
OVAL PIPE
●● 28 Ga.
●● 30 Ga.
Available in the following
●● STD Ga.
gauges, sizes & lengths:
●● 4” - 14” Dia.
●● STD Ga.
●● 60” Lengths
●● 4” - 6” Dia.
GALVANIZED C-VENT
Available in the following gauges,
sizes & lengths:
●● 26 Ga.
●● 4” - 14” Dia.
ALUMINUM C-VENT
Available in the following gauges, sizes &
lengths:
●● .025 Ga.
●● 3” - 6” Dia.
ALUMINUM FLEX PIPE - NON INSULATED
Available in the following sizes
& lengths:
●● 3” - 18” Dia.
●● 10 ft. or 25 ft. Lengths
SLIP WRAP / INSULATED SLEEVES
Available in the following:
●● R-4.2
●● 4” - 12” Dia.
●● 60” or 120” (6”&12” only)
SPIRAL PIPE
Available in the following gauges,
sizes & lengths:
●● 24 Ga.
●● 26 Ga.
●● 28 Ga.
●● 3” - 30” Dia.
100
ALUMINUM FLEX PIPE - INSULATED
Available in the following sizes & lengths:
●● 4” - 14” Dia.
●● 10 ft. or 25 ft. Lengths
CHIMNEY LINER
Features:
●● UL/ULC Listed.
●● Maximum Temperature Rating: 243°C or 470°F
●● Material: 2 Ply Aluminum (.005”)
●● Exceeds UL/ULC Hanging & Bending Test
Kit Contents:
●● Cap w/Storm Collar & Connector
●● Length of Flex
●● 16” x 16” Galvanized Flashing
●● Mortar Guard
●● Pull Through Connector
●● Package of Screws
●● Instruction Manual & Warranty Card
●● 3” - 7” Dia.
●● 25 ft. - 35 ft.
SHEET METAL
ELBOWS - 90 DEGREE (ADJUSTABLE)
Available in the following gauges & sizes:
●● 24 Ga.
●● 26 Ga.
ALUMINUM ELBOWS - 90 DEGREE (ADJUSTABLE)
●● 28 Ga.
●● 30 Ga.
●● .016 Ga.
●● 3” - 24” Dia.
●● 3” - 6” Dia.
GORED ELBOWS - 90 DEGREE
●● 24 Ga.
●● 26 Ga.
●● 15” - 24”
●● 10” - 14”
TEE - STRAIGHT / REDUCING / WYE
STRAIGHT TEE
Available in the following gauges and sizes:
●● 26 Ga.
●● 3” - 12” Dia.
BOOTS - ANGLE/END/UNIVERSAL
ANGLE
Available in the following sizes:
●● 3 x 10 x 5
●● 4 x 10 x 5
●● 3¼ x 10 x 4
●● 4 x 10 x 6
●● 3¼ x 10 x 5
●● 4 x 12 x 6
●● 3¼ x 10 x 6
●● 4 x 12 x 7
●● 4 x 10 x 4
●● 4 x 12 x 8
END
●● 3 x 10 x 4
●● 4 x 10 x 6
●● 3 x 10 x 5
●● 4 x 12 x 5
●● 3¼ x 10 x 4
●● 4 x 12 x 6
●● 3¼ x 10 x 5
●● 4 x 12 x 7
●● 4 x 10 x 4
●● 4 x 12 x 8
●● 4 X 10 X 5
●● 4 x 14 x 8
UNIVERSAL
●● 3 x 10 x 4
●● 3¼ x 10 x 4
●● 4 x 12 x 5
●● 3¼ x 10 x 5
●● 4 x 12 x 6
●● 4 x 10 x 4
●● 4 x 12 x 7
●● 4 X 10 X 5
●● 4 x 12 x 8
●● 4 x 10 x 6
●● 4 x 14 x 8
REDUCING TEE
●● 26 Ga.
●● 5 x 6 x 4
●● 4 x 5 x 4
●● 6 x 5 x 5
●● 4 x 6 x 4
●● 6 x 6 x 4
●● 5 x 5 x 4
TEE WYE
●● 26 Ga.
●● 4” - 12” Dia.
TAKE OFF
TOP
●● 26 Ga.
●● 4” - 10” Dia.
SIDE
●● 26 Ga.
●● 4” - 14” Dia.
101
SHEET METAL
FISHLOCK COLLAR
●● 32 Ga.
●● 28 Ga.
●● 4” - 8” Dia.
●● 10” - 16” Dia.
SPIN ON COLLAR w/DAMPER
●● 28 Ga.
●● 4” - 18” Dia.
END CAP - CRIMPED/NON-CRIMPED
●● 28 Ga.
●● 26 Ga.
●● 3” - 7” Dia.
●● 8” - 22” Dia.
REDUCER
Available in the following gauges &
sizes:
●● 8 - 5
●● 26 Ga.
●● 8 - 6
●● 4 - 3
●● 8 - 7
●● 5 - 3
●● 9 - 8
●● 5 - 4
●● 10 - 6
●● 6 - 3
●● 10 - 7
●● 6 - 4
●● 10 - 8
●● 6 - 5
●● 10 - 9
●● 7 - 4
●● 12 - 8
●● 7 - 5
●● 12 - 10
●● 7 - 6
●● 14 - 12
●● 8 - 4
DROP KITS
AVAILABLE IN THE FOLLOWING:
●● 28 Ga.
●● 10” x 20” - 16” x 20” x 1” Filter Size
●● 10” x 25” - 16” x 25” x 1” Filter Size
102
DAMPERS
●● 30 Ga.
●● 28 Ga.
●● 4” - 8” Dia.
●● 9” - 14” Dia.
COUPLINGS
●● 24 Ga.
●● 26 Ga.
●● 28 Ga.
●● 3” - 30” Dia.
SHEET METAL
PLENUMS
●● 13½” x 20”
●● All plenums are by 50 ft.
●● 16½” x 20”
●● Custom available
●● 20” x 20”
●● 23½” x 20”
SHEETS - GALVANIZED
●● 24” x 24” - 28 Ga.
●● 24” x 36” - 28 Ga.
●● 24” x 48” - 28 Ga.
DUCT
JOIST LINING
AVAILABLE IN THE FOLLOWING
GAUGES AND SIZES:
●● 12” x 36” - 32 Ga.
●● 16” x 36” - 32 Ga.
RETURN AIR STRIP
●● 1” X 60” - 32 Ga.
●● SMACNA & Residential
●● 8” x 8” - 8” x 32”
●● 10” x 12” - 10” x 26”
●● 12” x 18” - 12” x 24”
SHEETS - GALVANIZED
D-CLEAT
●● 60” Length - 30 Ga.
●● 120” Length - 26 Ga.
S-CLEAT
●● 60” Length - 30 Ga.
●● 120” Length - 26 Ga.
RETURN AIR STRIP
AVAILABLE IN THE FOLLOWING GAUGES,
SIZES AND LENGTHS:
●● 1-1/2” x 1-1/2” x 120” Lng. - 16 Ga.
●● 3-1/2” x 2-5/8” x 19-1/2” Lng. - 26 Ga.
SHEETS - GALVANIZED
HANGER STRAP
●● 1” x 120” Lng. - 16 Ga.
●● 1” x 120” Lng. - 22 Ga.
U-CHANNEL
●● 1” x 2” x 1” - 120” Lng. - 16 Ga.
103
NOTES:
104
Tel: (905) 265-0999
Fax: (905) 265-9993
WHY SHOP AT METALWORKS?
Express Pick-up Service
1 Stop Shop - if we don’t have it we’ll bring it in
Competitive Prices
Rush Custom Metal Service
Delivery Service
Customer service is our satisfaction.
Contact our knowledgeable Staff:
Counter Sales
Clayton Chantler - [email protected]
Kevin Ho - [email protected]
Anthony Gurman - [email protected]
Inside Sales
Kevin Hurst - [email protected]
Romy Viray - [email protected]
George Broomer - [email protected]
Mike Jones - [email protected]
Purchasing
Shah Haveliwalla - [email protected]
Marc Marchese - [email protected]
Accounting
Accounts Receivable - [email protected]
Accounts Payable - [email protected]
Operations Manager
Raquel Fernandes - [email protected]
Vaughan, ON L4H 3R6
Tel: (905) 265-0999
Fax: (905) 265-9993
PRIME METAL
& SKILLED/CERTIFIED SHEET METAL MECHANICS
With impressive lead times and Rush Service - Our Custom Sheet Metal
Manufacturing provides a variety of products and services:
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Duct line uses 48” wide coil 28 Ga.. - 20 Ga.
30 Ga. - 20 Ga. duct and fittings locked together, Pittsburgh lock or snap lock
18 Ga. and heavier duct and fittings are welded together, mig weld or tig weld available
Make duct and fittings from galvanized, satin coat, stainless steel, aluminum.
18 Ga. is the lightest we can weld
5” dia. elbows is the smallest diameter we can make.
For custom round fittings, 26 Ga. is the lightest we can make
Tdf flange can only be turned on material 20 Ga. or lighter, anything heavier has to be
ductmate frames
Custom round pipe will be rolled, spot welded and sealed.
Spiral pipe can be made from 28 Ga. to 20 Ga., galvanized.
10 Ga. metal is the heaviest we can work with.
Can manufacture 3” - 50”spiral pipe
Vanstone flanges up to 18 Ga.
Can solder drain pans along with nipple.
Can insulate duct and fittings with 1/2”, 1”, 1-1/2” and 2” both soft and rigid insulation.
Can manufacture gore lock elbows up to 50” dia.
Vaughan, ON L4H 3R6
Tel: (905) 265-0999
Ca
stl
em
ore
Rd
Qu
ee
nS
tE
Pk
wy
E
Wi
llia
ms
Rd
Dr
ay
rew
Go
t
or
rp
Ai
Al
W
Albion
Rd
Ave
Finch
W
Alb
ion
Rd
ve
ton A
Isling
Ste
ele
sA
ve
E
t
or
rp
Ai
REXDALE
Rexd
ale B
lvd
Rd
d
ry R
Der
De
rry
Rd
E
Pk
wy
E
Av
e
ve
ng A
Kipli
ch
Fin
on
pt
am
Br
Rd
d
aR
ale
am
Br
Qu
ee
nS
t. E
b i o Rd
n
Wild
Water
Kingdom
CN
ram
rb
To
Wi
llia
ms
e
es Av
Steel
427
407
407
27
50
ETR
ETR
W
s Ave
Steele
Glenview
Memorial
Gardens
er
mb
Hu
Bo
vai
rd
D
57
7
7
7
Dr
Rd
7
BRAMPTON
we
st P
kwy
y
Pine Valle
WOODBRIDGE
27
lvd
Zenway B
107
BRAMALEA
Ave
Kipling
Dr
n
tingto
New Hun
d
eR
or
eG
Th
an
Ve
Mc
8
Dr
ay
rew
Go
r. E
d
staff R
Lang
d
eR
or
eG
Th
Ca
stl
em
ore
Rd
Fax: (905) 265-9993
E
427
Goreway
Dr
27
BUYERS GUIDE

Full Product Catalogue

Transcription

Similar documents

lror"**rW - Neighborhood House Association

Gun-Style Infrared Thermometer with Dual Laser Sighting 422 / 423

Specifications - Complete Plumbing Source

PG8AC, PGAC - Drinking Fountains

Super 100 Large Capacity Chain Hoist (16 to 50 ton capacity)

100 CL - Kanaflex

012602 Art. VESPINO

Acurus DIA 150 - Straight Wire

kik-step®

kik-step®