multi-fit - BigTwin Motorcycles Group

Transcription

MULTI-FIT
Covers, Trims, & Accents
7748
L.E.D. HEaDLamPS - PG 133
7733
L.E.D. HALO HEADLAMP TRIM RINGS
7748
U.S. Patent d668,380 & d667,989
One of our most popular products! Our L.E.D. Halo Headlight Trim Ring adds incredible style with it’s grooved trim, easy
installation, & low draw on your electrical system.
FOR 5-3/4” HEaDLiGHTS
FOR 7” HEaDLamPS
7749 Chrome (ea)
7750 Chrome (ea)
Fits: ’08-’11 FLSTSB, ’99-’06 FXST, ’99-’09
FXSTB, ’94-’99 FXSTC, ‘11-’13 FXS, ’94-’13
Dyna models (except ’08-’13 FXDF), ’94
FXLR, ’04-’08 XL883, ’05-’13 XL883L,
’09-’13 XL88N, ’06-’08 XL883R, ’04-’08
XL1200R, ’07-’11 XL1200L, ’07-’12 XL1200N,
’10-’13 XL1200X, & ’07 XL50
Fits: ’94-’13 FLST Heritage, FLSTC Heritage
Classic, FLSTF Fat Boy, FLSTFB Fat Boy Lo,
FLSTN Heritage Softail Nostalgia, FLSTN
Heritage Softail Special, FLSTN Softail
Deluxe & FLS Softail Slim
7785 Chrome (ea)
Fits: ‘83-’13 Electra Glides, ‘06-’13 Street
Glides, ‘94-’13 Road Kings & ‘09-’13 Trikes
MULTI-FIT
7270 Chrome (ea)
Fits: ‘07-’10 FXSTC, ’00-’07 FXSTD, ’93-’06
FXSTS, ’95-’97 FXSTSB, ’97-’03 FLSTS,
’05-’07 FLSTSC, ‘13 FXSBSE, ’99 FXR,
’96-’13 XL1200C, ’99-09 XL883C & ‘12-’13
XL1200V
7733 Gloss Black (ea)
Fits: ‘83-’13 Electra Glides, ‘06-’13 Street
Glides, ‘94-’13 Road Kings & ‘09-’13 Trikes
FOR 4-1/2” PaSSiNG LamPS - Fits: ’83-’13 H-D Passing Lamps
7748 Chrome (pr)
Unlit Now Available!
7271 Gloss Black (pr)
7275
UNLIT HEADLAMP TRIM RINGS
7276
7275 Chrome Headlamp Trim Ring (ea)
Fits: ‘83-’13 Electra Glides, ‘06-’13 Street Glides,
‘94-’13 Road Kings & ‘09-’13 Trikes
7276 Gloss Black Headlamp Trim Ring (ea)
Fits: ‘83-’13 Electra Glides, ‘06-’13 Street Glides,
‘94-’13 Road Kings & ‘09-’13 Trikes
7277 Chrome Passing Lamp Trim Rings (pr)
renderingS Shown
7277
Fits: ’83-’13 H-D Passing Lamps
MULTI-FIT > COVERS, TRIMS, & ACCENTS > FRONT END
187
7793
7795
HEADLIGHT VISOR
for
8606
7”
headlight
Long, lean, & mean! Features a nicely
finished rolled front edge with center bullet.
Fastens securely to your existing headlight.
2182 Fits: all H-D models
with 7” headlight (ea)
FRONT & REAR LENS GRILLS with emblems
note: doeS not fit with h-d acceSSory trim ringS.
Our lens covers maximize the light’s impact with fine illuminated slots &
theme emblems.
7795 Flame & Zombie Front Fender Tip Lens Grill (ea)
Fits: ’80-’13 Electra Glides, Tour Glides, Road Kings, Trikes & '86-’13
FL Softail models with Front Fender Tip Lights
7793 Flame & Zombie Rear Fender Tip Grill (ea)
Fits: '80-'08 Electra Glides, Tour Glides, Road Kings, & '86-'13 FL
Softail models with Rear Fender Tip Lights
8606 Zombie Front & Rear Fender Tip Grills (pr)
Fits: ’80-’08 Electra Glides, Tour Glides, Road Kings & ’86-’13 FL
Softail models with front & rear fender tip lights
FENDER TIP
Simple installation requires no drilling &
can be done without any tools.
9012 Fits: Narrow H-D Front
DECO FRONT FENDER REFLECTOR GRILLS
Give your reflectors some much needed style.
Stock reflectors function with their original
intent.
7792 Fits: ’94-’13 FLHTC, ’94-’13
FLHTCU, ’10 FLHTK, ’94-’96
FLTCU (pr)
Installs in Minutes!
FRONT FENDER
SKIRT ACCENT
Go from down & dull to classy & chrome! it
chromes the lower portion of your front fender
without having to disassemble or even fumble
with any tools. made from chrome-plated
stamped steel.
Fenders on FXST, XL,
FXDWG, Dyna, & FXR
models (Leading Edge) (ea)
FENDER EXTENSION
for narrow front fenders
Enjoy a dryer ride in the rain, a cleaner
engine, & a subtle hint of sparkle. a
molded-in contour hugs the stock H-D
narrow fender tightly for a look so clean
you’d swear it was part of the original
fender!
Fits: Narrow H-D front fenders on FXST,
XL, FXDWG, Dyna & FXR models
9016 Front Fender Extension (ea)
Fits: ’80-’13 Electra Glides, Tour Glides, & Road
Kings with original equipment front fender skirt
& ’86-’08 FLSTC Heritage Classic, ’86-’90,
’06 FLST Heritage; & ’93-’96 FLSTN Heritage
Nostalgia or Special with original equipment
front fender skirt
7794 Front Fender Skirt accent (ea)
188
WWW.ZODiaC.NL
[email protected]
PLEaSE USE K WiTH THE KURyaKyN PN TO ORDER - EXamPLE: K1052
A.
FRONT FENDER SPEaR
measures 1-1/4" Wide x 8" Long. Peel-&-stick application.
7333
MULTI-FIT
A
FENDER ORNAMENTS
B
7332 Fits: Late model Touring models & Softails -
B.
Universal Front Fenders with approximately
15-1/4” radius (ea)
7332
DECO EaGLE FENDER ORNamENT
Light weight aBS design. Peel-&-stick application.
7333 Fits: Touring models & Softails - Universal
C.
Front Fenders with approximately 15-1/4”
radius (ea)
C
ORNamENTS
C
majestically sculpted with lighted eyes!
9022 Wild Boar (ea)
9026
9026 Eagle (ea)
9022
FRONT FENDER ACCENTS
Fits: ’06-’13 Street Glides, ’98-’09 Road Glides, ’10-’13
Road Glide Customs, ’11-’13 Road Glide Ultra, ’10-’11
Street Glide Trikes, ’04-’07 Road King Customs, ’04-’05
FLHTCSE, ’06-’13 FLHTCUSE, ’00-’01 & ’09 FLTRSE,
’02-’03, ’08 & ‘13 FLHRSE, ’10-’12 FLHXSE, ’11 FLTRUSE,
‘12-’13 FLTRXSE, & ‘12-’13 FLD
8642
7786 Front Fender Side Trim (pr)
8642 Leading Edge Fender accent (ea)
8643 Trailing Edge Fender accent (ea)
doeS not fit
7786
‘12-’13 fld.
1291
8643
2013
MULTI-FIT
2014
FULL COVERAGE CALIPER COVERS
1291
Front Caliper Cover (ea)
Fits: all ’84-’99 models,
’00-’07 FLSTS/FLSTSC/FXSTS,
& ‘08-’11 FLSTSB
BRAKE BLEEDER SCREW & BANJO BOLT COVERS
2013 Bleeder Screw Cover (pr)
Fit: all ’84-’13 stock H-D
calipers (except ’08-’13
Touring)
2014 Banjo Bolt Cover (ea)
Fits: ’84-’13 H-D master
cylinder & calipers (except
’08-’13 Touring master cylinder
& caliper, ’08-’13 Softail &
Dyna calipers & ’04-’13 XL
master cylinder & caliper)
ZOMBIE™ MEDALLIONS
1491 Large Zombie
(Requires 2” of
flat surface for
mounting) (pr)
note: rePlacementS
for KüryaKyn
Saddlebag latch
accentS (P/n 1595).
1492 Small Zombie
(Requires 1” of
flat surface for
mounting) (pr)
note: rePlacementS
for KüryaKyn P/n’S
1047, 1058, 1060,
1090, 1091, 1092,
7520, 7521, & 8606
CHROME REFLECTOR COVERS
Fits: Front Downtubes: all
’92-’08 H-D Touring models
(Electra Glides, Road Kings,
etc.), all ’91-’99 Softail
models, & all ’91-’99 Sportster
models - Other motorcycles
with reflectors that are
3-5/16” by 1-1/4” or smaller
with 1/4” of clearance around
the reflector
9001 Chrome
Reflector
Covers (pr)
note: See additional medallionS on Pg 224.
MULTI-FIT > COVERS, TRIMS, & ACCENTS > FRONT END
189
ROmaN
AXLE CAPS
PEaKED
ROmaN
GROOVED
CHROmE
SPUN BLaDE
POiNTED
SPUN BLaDE
ZOmBiE
TWiSTED
STiLETTO
NUT COVERS
Fits: ’84-’06 Softails
(except Deuce &
Springer), ’80-’99 Electra
Glides, Road Glides, Tour
Glides & Road Kings,
’91-’03 Dynas with 39mm
forks, ’93-’05 FXDWG,
’88-’07 Sportsters, ’88-’00
FXRs, ’80-’86 FXWG (pr)
1224
1225
1226
1232
1235
1217
1205
1201
Fits: ’00-’07 Electra
Glides, Road Glides,
Street Glides & Road
Kings, ’04-’07 Dyna
(except ’04-’05 FXDWG &
’07 FXDSE) (pr)
1224
1225
1226
1233
1236
1218
1212
1213
Fits: ’07-’13 Softails
(except Deuce, Springer
& Rocker), ’08-’13 Electra
Glides, Road Glides,
Street Glides & Road
Kings, ’08-’13 Dynas
(except ’08 FXDSE),
’08-’13 Sportsters, ’02-’11
V-Rod (except VRSCR &
VRSCF) (pr)
1224
1225
1226
1234
1237
1219
N/a
1214
TANK & DASH
SPEEDOMETER VISORS
112
112
Fits: ’68-’13 H-D models with Large FL-Style Tank-mounted
Speedo (FLH, FXWG, Softails, Dyna Wide Glide, ’94-’07
Road Kings) (ea)
4015 Fits: Speedometers & tachometers with a 3-3/4” O.D. &
7/16” exposed side wall. Fits perfectly on Road Glides,
’04-’10 Sportster Customs, & many other bikes (ea)
190
WWW.ZODiaC.NL
[email protected]
4015
7280
DECO L.E.D. FUEL & BATTERY GAUGE & GAS CAP
MULTI-FIT
7281
7280
U.S. Patent 7,652,563 (P/n 7281 only)
The ultimate combination of form & function. The sparkling L.E.D.’s let you easily judge your fuel &
battery levels out of the corner of your eye. a perfect match to our stunning Deco Gas Cap.
7281 Deco L.E.D. Fuel & Battery Gauge
Fits: Replaces stock tank mounted (not center console mounted) fuel gauge on
’94-’13 Road Kings, ’00-’13 Softails, & ’91-’13 Dynas & ‘88-’94 FXR models (ea)
7281
7280 Deco Gas CapFits: ’82-’13 H-D Screw-type Tanks – R.H. Thread – Vented (ea)
INFORMER L.E.D. FUEL
& BATTERY GAUGE U.S. P
atent
NEW & imPROVED
FiTS mORE mODELS!
7,652,563
a perfect match to our Flush mount Gas Cap, The informer’s sleek,
low profile design incorporates both an L.E.D. fuel gauge & an L.E.D.
battery gauge. The fuel gauge has a string of color coded L.E.D.’s
to indicate fuel level & our patent pending design allows the rider to
select the fuel level at which the red “empty” L.E.D. illuminates.
Fits: Replaces stock tank mounted (not center console mounted) fuel
gauge on ’94-’13 Road Kings, ’00-’13 Softails, ’91-’13 Dynas, &
‘88-’94 FXR models
7282
7282 informer L.E.D. Fuel & Battery Gauge (ea)
MULTI-FIT
FLUSH MOUNT GAS CAPS
Features an ultra slim keyed profile with a built in trim to
protect the painted surface & prevent tampering. Replaces
your stock gas cap.
Fits: all H-D screw type tanks from ’82-’13
8309
8309
(R.H. Thread) - Vented (ea)
8310
(L.H. Thread) - Non-Vented (ea)
8311
Replacement Key for 8309 & 8310 (ea)
REPLACEMENT GAS CAPS
Vented or non-vented, these chrome-plated gas caps are a great value.
Fits: all H-D screw type tanks from ’96-’13
8667 Peaked Low Profile Gas Cap (R.H. Thread) - Vented (ea)
8668 Peaked Low Profile Gas Cap (L.H. Thread) - Non-Vented (ea)
8669 Stock Style Gas Cap (R.H. Thread) - Vented (ea)
8669
8672
8667
8672 Domed Low Profile Gas Cap (L.H. Thread) - Non-Vented (ea)
MULTI-FIT > COVERS, TRIMS, & ACCENTS > TANK & DASH
191
9119
9119
1740
CHROME BRAKE &
CLUTCH CONTROL DRESS-UP KIT
an inexpensive, fast, & easy way to completely finish chroming your hand controls!
The Clutch Perch is a complete chrome replacement unit that has been beefed up to
complement the brawny look of an H-D. The master Cylinder Cover dresses up the
reservoir & covers the entire visible hand brake bracket assembly with a lush layer
of glistening chrome. There are even chrome clamp halves & hardware accents for a
100% detailed, pure custom look.
1740
1740 Fits: ’08-’13 Electra Glides, Road Glides, Street Glides, Road Kings & '09-'10
Trikes without Reverse (set)
1741 Fits: ’04-’13 Sportsters (set)
9119 Fits: Dual Disc-’96-’07 Electra Glides, Road Glides, Street Glides, Tour
Glides, & Road Kings, ’96-’13 Dynas, ’96-’03 Sportsters (set)
9126 Fits: Single Disc-’96-’13 Softails & Dynas, ’96-’03 Sportsters (set)
7809
7808
7807
7809
SWITCH HOUSINGS
SWITCH HOUSING COVERS
Housings accept stock ’96-’13 H-D switches.add our Chrome Brake
& Clutch Control Dress-up Kit (right) that includes everything else you
need to complete your family of chrome hand controls.
install right over the stock switch assemblies.
No disassembly.
7806
7807
7827 Fits: Following models WiTHOUT
Cruise: ’96-’13 FLHTC, ’06-’13 FLHX,
’10-’13 FLTRX, ’96-’09 FLHT
7808
7828 Fits: ’96-’13 FLHTCU, ’10-’13 FLHTK,
’98-’09 FLTR, ’11-'13 FLTRU, ’02-’13
FLHRC - Will also Fit the Following
models WiTH Cruise: ’02-’13 FLHTC,
’06-’13 FLHX, ’10-’13 FLTRX, ’02-’09
FLHT
Fits: ’96-’13 FLHTCU, ’10-’13 FLHTK, ’98-’09
FLTR, ’11-'13 FLTRU, ’02-’13 FLHRC, ’09-’13
FLHTCUTG (set)
note: will alSo fit
1747
‘96-’13 FLHR (except ’03 FLHRSE),
’96-’10 Softails (except ’03 FXSTDSE)
Fits the Following models WiTHOUT Cruise:
’96-’13 FLHTC, ’06-’13 FLHX, ’10-’13 FLTRX,
’96-’09 FLHT, ’10-’11 FLHXXX (set)
Fits the Following models WiTH Cruise: ’02-’13
FLHTC, ’06-’13 FLHX, ’10-'13 FLTRX, ’02-’09
FLHT, ’10-'11 FLHXXX (set)
1742
7809 Fits: ’96-’03 XL; ’96-’11 Dyna &
’02-’13 flhr if eqUiPPed with crUiSe.
Fits: ’96-’13 VRSC, XL, XR, & FLHR (except ’03
FLHRSE); ’96-’10 Softail models (except ’03
FXSTDSE), '96-'11 Dyna (set)
note: for beSt aPPearance, motorcycle mUSt be eqUiPPed with KüryaKyn
handlebar control dreSS- UP KitS (P/n
reServoir cover SetS (h- d P/n’S
Fits: ‘11-’13 Softail models (except ‘11-’12 FLSTSE,
‘13 FXSBSE) & ‘12-’13 Dyna models (set)
7828
WWW.ZODiaC.NL
7827
1747
NOW aVaiLaBLE FOR
NEWER SOFTaiL & DyNa!
192
9119 or 9126) or h-d handlebar
46099-98 or 46098-98).
[email protected]
ENGINE
CLUTCH CABLE
ADJUSTER COVER
7259
8655
MULTI-FIT
Dress up your cable with some chrome! Replaces the stock
rubber “bellow” boot with a stunning two-piece design. P/N
7259 telescopes to adjust to the length of the adjuster, so it’s
more compact.
2017
7259 Fits: ’87-’13 H-D models w/Stock Clutch
Cables (ea)
2017 Fits: all ’87-’13 H-D models with stock
cables & most steel braided cables 0.355” in
diameter or less (ea)
2023 Replacement Spring Clips for P/N 2017 (pr)
8655
OIL PRESSURE SENDER COVER for twin cam
The difference is in the details! The simple addition of this
finely sculpted chrome accessory adds life to the dull cast
finish surrounding it.
8655 Fits: ’07-’11 Electra Glides, Road Glides,
Street Glides & Road Kings, ’00-’13
Softails & ’06-’13 Dynas (ea)
note: not comPatible with oil coolerS.
7-COLORS iN ONE!
CHASING L.E.D. TIMING COVER
INFINITY ™ TIMING COVER
U.S. Patent d595,190
U.S. Patent 7,029,152
Unique 7-color L.E.D.’s can spin in circles timed to
your engine RPm’s, a single chosen color can be lit
or continuously change through all 7! Chrome timing
cover with multi-function L.E.D.’s, wiring & controller
included.
This truly unique cover comes to life from its mirror-like
chrome resting state to a virtual vortex of 7-color L.E.D.
lights once ignited. make all your friends envious of this
one-of-a-kind cover!
Fits: all ’84-’99 Evolution Big Twins, all ’99-’13 Twin
Cams, & ’86-’13 XL models
1302 Chasing L.E.D. Timing Cover (ea)
1303 Replacement Switch (ea)
4768 250V/3 amp Fuse (pr)
MULTI-FIT
Fits: all ’84-’99 Evolution Big Twins & all ’99-’13 Twin
Cam Engines
1301 infinity Timing Cover (ea)
4715 Replacement Switch/Controller (ea)
4768 250V/3 amp Fuse (pr)
LiZaRD LiGHT COmPaTiBLE - PG 148
MULTI-FIT > COVERS, TRIMS, & ACCENTS > ENGINE
193
FUEL LINE FITTING COVER
Cover up the plumbing on your fuel injected bike with this two-piece
streamlined beauty.
Fits: ’01-’13 Fuel injected Softails, ’02-’13 Fuel injected Electra Glides, Road
Glides, Street Glides, Road Kings, & Trikes, ’04-’13 Fuel injected Dynas, &
’07-’13 Fuel injected Sportsters
Fuel Line Fitting Cover (ea)
1521
1535 Replacement O-rings (pr)
THE MARQUIS CHOKE KNOB
U.S. Patent
5,836,214 & d418,390
Our choke knob cover installs neatly over the stock black plastic unit. Not only
does it look 100% better, it’s easier to find & get a hold of!
2009 Fits: all ’88-’06 XL models & ’90-’06
Big Twin with stock carburetors (ea)
1315
EASY TURN
DIPSTICK CAP
1007
9050
1315
9050
Utilizing the internals of the stock dipstick, this
easy turn cap replaces the top portion to make
checking oil levels quick & simple.
1007 Fits: ’07-13 Electra Glides,
Road Glides, Street Glides &
Road Kings, ’09-’13 Trikes,
’06-’13 Dyna models, ’08-’11
Rocker/C, ‘13 FXSBSE (ea)
PEAKED DIPSTICK ACCENT
1008
Compatible with our transmission shrouds.
1008 Fits: ’07-’11 Electra Glides,
Road Glides, Street Glides,
Road Kings; ’09-’11 Trikes,
’06-’11 Dyna models; &
’08-’11 Rocker/C (ea)
STARTER CONNECTOR PLUG COVER
1315
Fits: ’96-’06 Evo Big Twin &
Twin Cam Starters (ea)
note: intended for toUring & dyna modelS. thiS
connector iS covered by oil tanK on Softail m odelS.
CHROME SOLENOID COVER
9050 Fits: ’90-’06 Big Twin Starters,
’91-’13 XL1200, & ’95-’13 XL883
(not for use w/ full coverage
starter end covers (ea)
ZOMBIE™ OIL FILLER CAP
1052
1052 Fits: ’93-’06 Electra Glides,
Road Glides, Street Glides,
Tour Glides, Road Kings &
’99-’05 Dynas (ea)
INSTY-CHECK DIPSTICKS
Check your oil in seconds!
1010 ’80-’86 5-Speed Big
Twin, Red (ea)
1014 ’80-’86 5-Speed Big
1010
194
1014
WWW.ZODiaC.NL
Twin, Blue (ea)
[email protected]
CHROME OIL SENDER SWITCH COVER
8136 Fits: all ’84-’99 Evo Big Twins except models equipped with large
2-terminal sending units
CLUTCH CABLE FERRULE ACCENT
2024 Fits: Clutch Cables on ’87-’99 Big
Twin & ’91-’06 Sportsters (ea)
note: doeS not worK with KüryaKyn tranSmiSSion ShroUdS
(P/n 8198, 8208, 8209).
KOOL KAPS CHROME COVERS
2449
PaCKS - 10/PK
2448
2447
2440 For 3/16” allen Bolts
2440
2442
2442 For 7/16” Hex Bolts
2446
2441
KiT
This set has all the Kool Kap bolt
covers to do your Twin Cam or EVO
Engine, Cam Cover Transmission &
Primary Cover
2445
2444
2443
2444 For 1/4” Torx Bolts
2449 For 9/16” Hex
2450 Fits: Twin Cam
Deep/30t Torx*
2446 For 1/2” Hex Bolts*
or EVO Engine,
Cam Cover
Transmission &
Primary Cover
2451 For 3/4” hex head
2447 For 3/4” Hex Bolts*
bolt used in Küryakyn
Highway Pegs* (pr)
2448 For 5/8” Hex Bolts
MULTI-FIT
2450
* reqUireS a Small amoUnt of Silicone. foUnd at local hardware Store or order KüryaKyn P/n 400039 for $8.99.
E
A
C
E
8107
B
D
D
8144
E
8372/8693
8106
A.
HOT SPOTS™ CUSTOM END PLUGS
for allen head bolts
CHROmE
8114
Fits: 1/4” allen Bolts (10 pk)
8117
8120 Fits: 3/8” allen Bolts (6 pk)
BLaCK
8113
TURqUOiSE
aqUa PEaRL
B. HOLLOW POINT
SLEEVE & HOT SPOT KIT
The ultimate finishing touch! Works
great on all motor bolts using a ¼”
Socket Head Cap Screw. available
in packs of ten - two packs will
cover both sides of your motor.
7771 Hollow Point
Sleeve & Hot Spot
Kit (10 pk)
C. HOT SLEEVES
Cover the heads of 1/4” allen bolts
found on your Evolution or Twin
Cam engine. Top off with our Hot
Spots & you’ll be lookin’ good.
8781 Hot Sleeves (10 pk)
D.
MULTI-FIT
HEAD BOLT COVERS
Fits: all ’87-’13 H-D models
8106 Peaked (set/4)
8107 Stiletto (set/4)
E. ROCKER BOX BOLT COVERS
The final touch that makes the
difference. Simple push-on
installation.
Fits: all ’99-’13 Twin Cam Engines
8372 Peaked (set/4)
8693 Peaked (set/6)
8144 Stiletto (set/4)
note: Stiletto cover extendS
5/8” above toP
SUrface of the rocKer box bolt. verify there iS
adeqUate clearance above the boltS yoU intend
to cover.
MULTI-FIT > COVERS, TRIMS, & ACCENTS > FASTENER COVERS
195
7246
7247
THROTTLE BODY COVER
Designed to dress up one of the most noticeable areas on the Twin Cam motor, this
throttle body cover mounts behind the air cleaner for a clean & simple chrome look.
available for most air cleaners including all Küryakyn air cleaner styles.
7246 Fits with Küryakyn Hypercharger, Pro-Series Hypercharger, or Pro-R
ZOMBIE™
INFINITY ™ HORN COVER
Hypercharger on ’01-’13 EFi Softail models, ’02-’07 EFi Touring models,
or ’04-’13 EFi Dyna models (ea)
7247 Fits with all Küryakyn air Cleaners (except Hyperchargers & Twin
U.S. Patent 7,029,152
Velocity/Plus), Ness Big Sucker i & ii, & Screamin’ Eagle Stage 1 & Heavy
Breather on ’01-’13 EFi Softail models, ’02-’07 EFi Touring models, or
’04-’13 EFi Dyna models (ea)
8389
8389
TAPPET BLOCK ACCENTS
8389 Fits: all ’99-’13 Twin Cam Engines (ea)
note: not comPatible with KüryaKyn taPPet blocK
coverS (P/n 8230).
8123
8123 Fits: ’84-’99 EVO Big Twins (requires minor
modifications to stock airbox) (set)
note: flt modelS reqUire the USe of P/n 1600.
Gaze into the face of the Zombie. you’ll
see a world beyond paint or simple
chrome. The amazing infinity effect
uses multi-color L.E.D.’s to give the
chrome skull’s eyes & nose endless depth
while illuminating steadily, flashing, or
continuously fading through an array
of colors at any frequency you desire.
Use the included controller or connect to
other infinity or Lizard Light accessories.
Fits: ’92-’13 H-D models with stock
cowbell horn cover
7719 Zombie infinity
BREATHER BOLT COVERS for twin cam
7791
Horn Cover (ea)
Simply press-on & tighten the set screw.
Fits: all ’99-’13 Twin Cams with Küryakyn air Cleaners &
Crankcase Breather Kits & ’07-’13 Sportsters with Küryakyn
air Cleaners
7791 Breather Bolt Covers for Twin Cam (pr)
SCORPION SPARK PLUG-HEAD BOLT COVERS
8323
FOR TWiN Cam
8323 Fits: all ’99-’13 Twin Cams (pr)
8369 Fits: S&S Super Stock 96” (pr)
FOR EVOLUTiON
8315 Fits: H-D Evo Big Twins & ’86 -’03 XL (Does
8315
not fit Screamin’ Eagle Evo Heads) (pr)
More...
ENGiNE CHROmE FOR
TOURiNG - PG 44
196
WWW.ZODiaC.NL
[email protected]
HORN COVERS & HORNS
7714
8128
7718
7741
7204
HORN COVERS
SKULL HORN COVER
maCH 2 HORN COVER
aBS construction – fastens to stock cowbell cover with
3m VHB.
Die-cast cover with mesh insert – perfect match to
mach 2 or alley Cat air Cleaners
Fits: ’92-’13 H-D models with stock cowbell horn cover
Fits: ’95-’13 H-D models with cowbell horn assembly
7296 Chrome with Black mesh (ea)
7718 Chrome (ea)
7741
MULTI-FIT
7297 Gloss Black with Chrome mesh (ea)
Painted Black Chrome (ea)
FLamE HORN COVER
V-SHiELD HORN COVER
aBS construction – fastens to stock cowbell cover with
3m VHB.
Die-cast construction offered in chrome or gloss black.
Fits: ’92-’13 H-D models with stock cowbell horn cover
7714 Chrome (ea)
Fits: ’92-’13 H-D models with cowbell horn assembly
8128
Chrome (ea)
7204 Gloss Black (ea)
7297
MULTI-FIT
7296
Perfect Match
To Our Mach 2™
Air Cleaner!
FOUND ON PG 224
MULTI-FIT > COVERS, TRIMS, & ACCENTS > HORNS & HORN COVERS
197
7743
7742
WOLO® BAD BOY
AIR HORN KITS
Küryakyn has teamed up with Wolo
to bring you the best & easiest to
install air horn on the market. The latest
in air horn technology, Wolo’s Bad Boy air
Horn produces a powerful dual-tone air horn sound that is two
times louder than the factory horn (118 decibel - 530/680 H2). The
one-piece design requires no hoses & the heavy-duty, maintenance
free compressor will provide years of dependable service.
7732
Küryakyn designed a sturdy bracket & plug-&-play wiring
harness so you can mount the Bad Boy in place of the stock H-D
horn without any fabrication & plug it in without having to piece
together your own wiring to install the relay.
Fits: ’92-’13 H-D models with stock cowbell horn
7743
7742 Deluxe Kit (kit)
7298
7743 Super Deluxe Kit (kit)
note: inclUdeS KüryaKyn chrome cover (P/n
7732).
COVER FOR WOLO BAD BOY AIR HORN
7732 Cover for Wolo Bad Boy Horn (ea)
Fits: Küryakyn P/N 7742 & Wolo Bad
Boy air Horn models 419 & 519
FLAME™ HORN COVER
with wolo ® electric horns
This kit combines Wolo’s 225 T2 high-low tone electric horn (115
decibel 510/420 H2) with our Flame Horn Cover and complete
mount & wiring kit.
7298
7298 Flame Horn Cover (kit)
9024
TAILLIGHT COVERS
Sturdy & attractive. These superbly stylized
covers do wonders for your dull taillight.
3-year limited warranty included, as these
will never rust.
Fits: ‘73-’13 H-D models with conventional taillights (does
not fit models with bobbed fenders, Deuce, V-Rod, models
with Tombstone Taillights or ‘11-’13 XL1200C)
9009
8130 Chrome Taillight Cover (ea)
9008 Chrome Taillight Visor without Slots (ea)
9009 Chrome Zombie (ea)
9008
U.S. Patent d 632,815
8130
9024 Gloss Black Zombie
U.S. Patent d 632,815
9020 Chrome Widow (ea)
note: P/n 9008 iS intended for motorcycleS with the licenSe Plate below
the taillight to cover the clear window on toP of the lenS.
198
WWW.ZODiaC.NL
[email protected]
9020
SEAT RELEASE
make taking off your seat a snap!
installation requires no modifications.
The spring-loaded latch nestles in a
smoothly shaped housing that covers the
seat’s mounting tab. 1/4”-20 and 1/4”-28
mounting screws are included.
Take the hassle out of removing your
seat. No tools required. Combo Kit
includes tang cover & both 1/4”-20 &
9035
1/4”-28 threaded screws. Works well on
almost all seats. installation on ’99-newer bikes requires
removal of stock captured thumb screw.
MULTI-FIT
SPEED TAB
9035 Seat Screw & Beauty Cap Combo
9037 Speed Tab Seat Latch (ea)
9038 1/4” - 20 Knurled Screw Only (ea)
LICENSE PLATES
3138
3148
9171
3138
MULTI-FIT
More License Plates
56
CVO 11
SOFTaiL 100
TOURiNG
CURVED LAYDOWN LICENSE PLATE MOUNTS
with frame
The curved frame meets the backing plate cleanly for a finished & completely
custom look. accepts 4”x 7” plates.
Fits: any H-D model with the standard 3-bolt mounted license plate bracket
(Dyna, Sportster, Heritage, Fat Boy, etc.)
UNLiT
9171
–
plate illuminated by taillight or other light source
Chrome Curved Laydown License Plate mount with Frame (ea)
3148 Gloss Black Curved Laydown License Plate mount with Frame (ea)
LiT
–
frame includes dot compliant light source
3138 Lighted Curved Laydown Plate mount (ea)
MULTI-FIT > COVERS, TRIMS, & ACCENTS > LICENSE PLATES
199
3166
LIGHTED CURVED LICENSE
PLATE FRAMES
3166
WiTH RUN-TURN-BRaKE iNDiCaTiON
a perfect complement to Panacea
Taillights & Run-Turn-Brake Controllers, this
plate ties right in for all 3 functions. Designed for 4” x 7” plates.
Fits: any H-D model with the standard 3-bolt fender mounted
license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
3166 Curved License Plate Frame
with Run-Turn-Brake (ea)
3152
WiTH TRi-LiGHT
mounts to the existing factory license
plate bracket & with 8 degrees of
tip back the rear of the bike will be
transformed. L.E.D. Tri-Light provides
auxiliary Run-Turn-Brake lighting.
Fits: Universally bolts directly to flat stock
OEm license plate mount for 4”x 7” License Plate
3152
3152 L.E.D. License Plate
Frame with Tri-Light (ea)
3125
CURVED SIDE
MOUNT LICENSE HOLDERS
Sized to fit 4” x 7” plates only. all
are lighted to illuminate the license plate.
LiCENSE HOLDERS
9253 Chrome Curved Horizontal Side mount (ea)
9251 Chrome Curved Vertical Side mount (ea)
9253 + SOFTaiL mOUNT
9252 Chrome Curved Vertical Side mount with Taillight (ea)
3125 Gloss Black Curved Horizontal Side mount (ea)
note: moUnt clamPS reqUired for inStallation
- Sold SeParately (below).
mOUNT CLamPS
Required for installation of Küryakyn
Side mount License Holders.
Fits: Universal for 1-1/4” diameter tubing
3175 Chrome (ea)
9252
9251
3121
Gloss Black (ea)
note: PleaSe checK local lawS regarding Side moUnt licenSe PlateS before ordering.
FiND mORE FamiLy SPECiFiC FiTmENTS:
200
WWW.ZODiaC.NL
[email protected]
SOFTaiL - PG 101
SPORTSTER - PG 127
DyNa PG - 114
MULTI-FIT
3159
5450
L.E.D. LIGHTED CURVED LICENSE PLATE FRAME
Here’s a great universal Curved License Plate Frame for
custom or stock fenders. it includes a chrome backing
plate & outer frame with built-in L.E.D.’s to illuminate the
license plate. it’s a great way to relocate a license plate
below the taillight!
9255
Fits: Universal applications with 4” x 7” license plates –
installation requires drilling mounting holes
9255 L.E.D. Lighted Curved
License Plate Frame (ea)
3160
9166
3161
LICENSE FRAME & BACK PLATE SET
EAGLE
Uses the stock bracket.
Fits: Universal 4”x 7” Plates & Stock mounting Bracket on ’97-’08
Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides, or
’97-’08 FLHT Standards (ea)
Fits: 4” x 7” Plates
9166 License Frame &
license plate frames
3160 Lone Eagle (ea)
Back Plate Set (ea)
3161
MULTI-FIT
Swept Eagle (ea)
9167
9165
9164
LIGHTED LICENSE PLATE FRAME
LAYDOWN LICENSE HOLDER
This chrome die-cast license plate
frame incorporates two high
intensity light bulbs that are wired
separately. Wire one each to
your brake & tail lamp circuits or
together for an extra bright stop or
running light.
Kit includes rubber wedge so
you have an option as to how
far the plate lays down.
9167 Fits: 4” x 7”
Plates (ea)
note: not intended to rePlace o.e.braKe
9165 Fits: any H-D
model with the
standard 3-bolt
mounted license
plate bracket
(Dyna, Sportster,
Heritage, Fat Boy,
etc) (ea)
BALL-MILLED
LICENSE PLATE FRAMES
Offered in two sizes; Large to
fit 4-3/8” x 8” & Small to fit
4” x 7” plates.
9164 Large License
Plate Frame (ea)
9163 Small License
Plate Frame (ea)
or taillight.
MULTI-FIT > COVERS, TRIMS, & ACCENTS > LICENSE PLATES
201
L.E.D. LICENSE
PLATE BOLT LIGHTS
Light up your license plate whether it’s in the stock
location or custom mounted with these white L.E.D.
bolt lights. you won’t find a cleaner license plate
lighting option with a simpler installation.
9199
9199 L.E.D. License Plate Bolt Lights (pr)
note:
1/4”-20 moUnting StUd. chrome frame Sold SeParately (P/n 9163).
LICENSE PLATE MOUNTING HOLE COVERS
3159
3158
an appealing way to cover the exposed holes left in the fender after the
stock license plate bracket is removed. Both covers install in minutes &
completely cover the footprint left by the stock mount.
Fits: all H-D models with standard 3-bolt fender mounted license plate
bracket (both styles also cover the fourth hole found on some Dyna &
Sportster models)
3158 License Plate mounting Hole Cover with Emblems (ea)
3159 Tribal License Plate mounting Hole Cover (ea)
9398
L.E.D. LICENSE PLATE ILLUMINATORS
with tu rn signal accents
9398
Each License Plate illuminator has two L.E.D.’s.
The white L.E.D. lights up the license plate &
the rear-facing red L.E.D. can function as an
auxiliary running light, turn signal, or brake
light for added visibility. The 1/4”- 20 mounting
stud makes it simple to bolt them on, wire them
in, & ride on!
L.E.D. License Plate Bolt Lights
9398 with Red accent Light (pr)
9168
INSPECTION PLATES
mounts cleanly in any location
dictated by local or state regulations.
Universal fitment.
inspection Plate
9168 3-1/2” x 3-1/2” (ea)
inspection Plate
9162 2-7/8” x 4” (ea)
LICENSE PLATE MARKER LIGHT/TURN SIGNAL MOUNT
mount auxiliary marker lights or turn signals to your license plate. mounts directly to
the back of your license plate with support backing plate & two side mount brackets.
The side mount brackets have a 3/8” hole & will accept Küryakyn Silver Bullets or
L.E.D. mini Bullets.
note: great oPtion for allowing the moUnting of SaddlebagS on biKeS that need to relocate tUrn SignalS.
will not worK with KüryaKyn cUrved licenSe Plate frameS.
lightS not inclUded
4247 License Plate marker Light mount (ea)
TURN SIGNAL RELOCATOR KIT
Now you can mount a set of Edge Saddlebags & keep your stock turn signals. This
kit takes all the guess work out of relocating your stock signals by moving them from
the fender to the license plate area. Side mount brackets have several mounting
points for lights & will accept most OEm rear turn signals.
3155
202
WWW.ZODiaC.NL
3155 Turn Signal Relocator Kit (kit)
note: will not worK with KüryaKyn cUrved licenSe Plate frameS.
[email protected]
MULTI-FIT
TRADITIONAL
3-POUCH FAIRING BAG
FEaTURES
all your small items
WORKS WiTH
OR WiTHOUT OUR
iNNER FaiRiNG
aCCENT!
Dims: 20” Wide x 2.75” High x 3” Deep
Fits: ‘96-’13 Electra Glides, Street Glides & Trikes,
Küryakyn airmaster Fairing, & Sportech Detachable
Fairing-Plus
all mounting hardware included.
Luggage
4178 Traditional Style 3-Pouch Fairing Bag (ea)
note: worKS well with KüryaKyn inner fairing accent (P/n
17, 25) or h-d fairing daSh Pad 58262-05.
FAIRING POUCH
SINGLE POCKET WINDSHIELD BAG
FEaTURES
for smartphones
3766 - PgS 9,
This is the perfect solution to mount your smartphone within
view & add useful storage for all your essentials within reach.
Thanks to the clear viewing window, all touch screen functions
remain while your device remains snug & secure. Keeping
your device connected & charged is accomplished through
specially designed ports at the top & bottom, & installation
takes just minutes with a few simple hand tools.
durability & shape retention
Fits: ’96-’13 Electra Glides, Street Glides & Trikes
MULTI-FIT
Fits: ‘96-’13 Electra Glides, Street Glides & Trikes
4129 Single Pocket Windshield Bag (ea)
Dim: 24" Long x 5" Deep x 5-1/2” High
Cubic inches: 220
note: doeS not worK on air m aSter fairing or SPortech detachable fairing.
doeS not worK with KüryaKyn inner fairing accent (P/n 3766) or h-d
fairing daSh Pad (P/n 58262-05).
4138 Fairing Pouch (ea)
note: doeS not worK on air m aSter fairing or SPortech detachable
fairing. doeS not worK with KüryaKyn inner fairing accent P/n
3766, or h-d fairing daSh Pad P/n 58262-05
PERFECT FiT FOR iPHONE!
4129
4138
MULTI-FIT > LUGGAGE
203
PAKMASTER
WINDSHIELD POUCH
FEaTURES
FEaTURES
& shape retention whether packed full or empty
access easily
Down Dividers
to the Outside of the middle Compartment as a map
Pouch or multi-use Pocket & Can Be Stored inside main
Compartment When Not in Use
Fits: Detachable Windshields including Küryakyn quick
Release Windshields & memphis Shades Windshields
Dim: 20-1/2" Long x 6-3/4" High x 6" Deep
Cubic inches: 290 main Compartment 370 overall with
Both Pockets
included items: Rain Cover, Shoulder Strap, Protective Cloth, &
mounting Brackets
Dim: 26" Wide x 9.5" High x 18.5" Deep
4137 Windshield Pouch (ea)
note: checK for clearance with cableS to enSUre bag doeSn’t interfere
with Steering. a ll moUnting hardware inclUded. m oUnting bracKetS
have 3 different PointS for height adjUStability.
Cubic inches: 2,845
DELUXE CONVERTIBLE™
LUGGAGE RACK BAG with protective cover
TOUR TRUNK ROLL BAG
4168 Pakmaster
FEaTURES
Elastic mesh pockets & multiple pouches make your items
readily accessible. 1200 Denier nylon construction, heavyduty zippers, & zip-out rain cover. Bag also features
mounting straps utilizing both hook-&- loop fasteners &
elastic shock cords.
Fits: attaches to Küryakyn Luggage Rack, H-D & other
standard racks on the market
& shape retention whether empty of full
Dim: main bag 21.5" Long x 9.5" Wide x 8" High
Two Pockets 4.5" Wide x 9" High x 3" Deep
included items: Retractable Cable Lock, mounting Straps & Rain Cover
Cubic inches: 1,634
Dim: 10” Tall x 12” Deep x 19” Wide
Cubic inches: 1,492
4162 Deluxe Convertible
Luggage Rack Bag, Black
204
WWW.ZODiaC.NL
4142 Tour Trunk Roll Bag
[email protected]
MULTI-FIT
DAILY TOUR BAG
FEaTURES
access for loading & unloading
durability & shape retention
included items: Bag, Shoulder Strap, adjustable
Universal Straps, “y” Strap & Rain Cover
Dim: 12” Long x 10” High x 15” Wide
Cubic inches: 1,425
4133 Daily Tour Bag
mOUNTiNG OPTiONS
great on large or small Tour-Pak racks)
of clearance from the top of the backrest down)
COmBiNE BOTH OUR ULTRa TOUR BaG WiTH THE DaiLy
TOUR BaG ON TOP FOR a GREaT TOURiNG COmBO!
SUPer SecUre
adjUStable StraP
ULTRA TOUR BAG
aCCESS FROm BOTH SiDES
FEaTURES
Large center compartment & 2 large end compartments
per side
MULTI-FIT
Fully zipped end doors & large hatch allows ample
access to main compartment from most sides
Expandable side compartments provide extra room
when you need it
Wide hook-&-loop belt securely attaches bag to
any backrest
Weather resistant construction & self sealing water
proof zippers w/glove friendly pulls
1200 Denier & semi rigid construction for durability
& shape retention
included items: Bag, Shoulder Strap, Two adjustable
Universal Straps & Rain Cover
Dim: 16-1/2” High x 16” Wide x 15” Deep (Expands to
20” Wide)
Cubic inches: 3,960 Expanded: 5,280
4148 Ultra Tour Bag
MULTI-FIT > LUGGAGE
205
WORKS GREaT ON TOUR BOX
LUGGaGE RaCKS TOO!
CLASSIC TOUR BAG
FEaTURES
Zippered ends & large hatch allow access to main
compartment from almost all sides
Expandable side compartments provide extra
room when you need it & keep the bag narrow
when you don’t
Weather resistant construction & waterproof self
sealing zippers with glove friendly pulls
1200 Denier & semi-rigid construction for durability
& shape retention whether packed full or empty
Wide hook-&-loop belt securely attaches bag to
any backrest
Convenient shoulder strap makes it easy to carry
into the hotel after a long ride
EaCH END EXPaNDS 1.5”
included items: Bag, Shoulder Strap, Two adjustable
Universal Straps & Rain Cover
Dim: 12” Long x 11” High x 21”
Wide (Expands to 24”)
4144 Classic Tour Bag
maiN COmPaRTmENT EXPaNDS 4”
CUSTOM ROLL BAG
FEaTURES
Zippered ends & large hatch allow access to
main compartment from almost all sides
Expandable main compartment provides extra
room when you need it & keeps the bag narrow
when you don’t
Waterproof zippers & rain cover
1200 Denier & semi-rigid construction for
durability & shape retention whether empty or
packed full
Universal mounting straps provide endless
mounting options
Can be mounted on a backrest with or without a
luggage rack
included items: Bag, Rain Cover & Shoulder Strap,
y-Strap
Dim: 8” Diameter x 19” Length (Expands to 23”)
Cubic inches: 955 Expanded: 1,156
4166
Custom Roll Bag
note: reqUireS 10” of clearance from the toP of the bacKreSt
down when moUnting withoUt a lUggage racK.
206
WWW.ZODiaC.NL
[email protected]
moUnt on a lUggage racK
EXPaNDaBLE 1-1/2”
MULTI-FIT
moUnt on a PaSSenger Seat
moUnt on a toUr- PaK®
lUggage racK
GRANTRAVELER BAG
FEaTURES
items with you
Weather resistant 1200 denier & semi-rigid construction for
durability & shape retention with accents for style
additional internal & external compartments for small items
included items: Bag with Two Removable End Bags,
Waist/Shoulder Straps for End Bag, Rain Cover & adjustable
Universal Straps
Dim: 17” Long x 22” Wide x 11” Deep (Expands to 12-1/2” Deep)
4149 GranTraveler Bag
mOUNT GRaNTRaVELER ON TOP OF GRaNTHROW-OVER
SaDDLEBaGS FOR a PERFECT TOURiNG SET-UP!
GRANTHROW-OVER SADDLEBAGS
FEaTURES
with adjustable mounting belt & universal straps for
additional security
MULTI-FIT
1200 Denier & semi-rigid construction for durability &
shape retention with accents for style
included items: One Pair of Saddlebags, Rain Covers &
adjustable Universal Straps
Dim (Each): 24” Tip to Tail Slanted Saddlebags, 12” Tall x
8-1/2” Wide (one end Expands to 11” Wide)
EXPaNDaBLE DRiNK
HOLDERS
END EXPaND 2-1/2”
mOUNTiNG OPTiONS
Cubic inches: 2,448 per bag
Expanded: 3,168 per bag
4171
GranThrow-Over Saddlebags
mounted at the end of the rear fender or applications with
Small Silver Bullet Turn Signals (pg 143)
note: aPPlicationS with larger tUrn SignalS moUnted to fender StrUtS may limit
the nUmber of moUnting oPtionS. dePending on the SPecific moUnting, theSe
bagS may limit acceSS to PaSSenger footPegS.
MULTI-FIT > LUGGAGE
207
PET PALACE
Does your small pet like to ride? if so, we have the safest, stylish, & most
convenient solution! Place your pet inside, strap it to the bike & you're
ready to take your favorite pet on the safari of a lifetime. Equipped with
more features than you can shake a stick at - a drink holder for you &
a food dish holder for your pet. also a removable washable faux fur
comfort liner, built in leash, two large storage compartments & four
mesh windows for viewing & ventilation.
FEaTURES
included items: adjustable leash, 2 dishes, 4 metal stakes for securing to
the ground, & adjustable straps for mounting to the motorcycle
Dim: 18-1/2" Long x 15” Wide (with pockets) x 13” High
Cubic inches: 2,765 (inside only)
4198
4199 Pet Palace, Black
4198 Pet Palace, Grey
TOMBSTONE BAG U.S. P
atent
GRANCRUISE BAG
6,802,440
FEaTURES
FEaTURES
frame backrest & a bag - includes 3 thickness sizes for
backrest pads
lower compartment
passenger backrest
retention & accents for style
included items: 1/2” Pad, 2” Pad, 3” Pad, inside Frame
(Removable for Helmet Storage), inside Pocket with Elastic
Straps, inside Pocket with mesh Front, Two Side Bags, Rain
Cover, Four Straps with Clip & Shoulder Strap
Dim: 12” Long x 12” High x 9” Wide
Cubic inches: Without Side Bags 1,188 with Side Bags 1,958
4143 Tombstone Bag
mOUNTS ON
LUGGaGE RaCKS
TOO!
included items: Bag, Shoulder Strap, Soft Tank Pad, Side Pocket &
Bottle Holder, Universal mounting Straps, “y” Strap, Rain Cover
Dim: 11” Long x 11” Wide x 4-1/2” Deep (Expands to 7-1/2” Deep)
Cubic inches: 423 Expanded: 726
4139
GranCruise Bag
mOUNTS DiRECTLy TO
TaNK maGNETiCaLLy!
note: reqUireS 10” of clearance from the toP of the bacKreSt down when
moUnting withoUt a lUggage racK.
HaS BUiLT-iN
DRiVER
BaCKREST!
EXPaNDS 3”
208
WWW.ZODiaC.NL
[email protected]
MULTI-FIT
aLL THE CONVENiENCE OF a TWO-PiECE LUGGaGE
SySTEm iN ONE! JUST EXPaND TOP WHEN NEEDED!
FULL DRESSER BAG
The most complete, versatile piece of motorcycle specific luggage available.
COmPRESSED
FEaTURES
a unique wrap-around heavy-duty zipper
even with gloves on
EXPaNDED
backrest
variety of straps & D-rings
keep clothes neat & wrinkle free & ensures bag will sit
nicely & ride smoothly while empty
helmet in expandable top - folds neatly away when
not needed
jackets above the roomy top compartment
piping & waterproof zippers
included items: Bag, adjustable Universal Straps, &
Rain Cover
Dim: 12” Wide main Compartment (Overall Width
18”), 10” Deep x 18” Tall (Top Compressed), or 25”
Tall (Top Expanded)
PUll StraP
rigid PlaStic
molded inSert
SUPer SecUre
adjUStable StraP
4140 Full Dresser Bag
MULTI-FIT
MINI GRANTOUR BAG
FEaTURES
1-1/2 Times Original Size with Pop Up
Semi-Rigid Support to Hold its Shape
EXPaNDS 4”
1200 Denier & semi-rigid construction for durability & shape retention
included items: Backpack Bag with motorcycle mounting Pad, Padded
Shoulder Strap, Rain Cover, adjustable Universal Strap & adjustable
mounting Strap, y-strap
Dim: 14” Long x 14” Wide x 8” Deep (Expands to 12” Deep)
4167 mini GranTour Bag
note: reqUireS 10” of clearance from the toP of the bacKreSt down when moUnting withoUt
a lUggage racK.
MULTI-FIT > LUGGAGE
209
Ultimate Weekend Companion!
SUPer SecUre
adjUStable StraP
GRANTOUR BAG
without backrest, sissy bar or luggage rack
retention & accents for style
included items: Bag, Passenger Seat mounting Pad System, adjustable
Straps, Retractable Lock, Rain Cover, & Backrest Pad
Dim: 18” Tall x 14” Deep x 20” Wide
aDJUSTaBLE
BaCKREST
Cubic inches: 3,744
4141
GranTour Bag
GRANTAILGATER BAG
SUPer SecUre
adjUStable StraP
FEaTURES
external compartments
when needed
tailgate table for fun on the road
6-12oz cans with ice
1200 Denier & semi-rigid construction for durability & shape
retention with accents
included items: Bag with Tailgate Feature, 6-Pack Cooler Bag,
adjustable mount Straps, Rain Cover, & Backrest Pad
PUll handle
Dim: 21” Tall x 17” Deep (Plus 1-1/2” for Handle) x 24” Wide
Cubic inches: 6,402
inclUded cooler bag
210
WWW.ZODiaC.NL
[email protected]
4172 GranTailgater Bag
Now Available for Trikes!
a variety of padded & see through mesh compartments offer protection &
easy accessibility for frequently used items. quick disconnect & handles make it
easily portable.
FOR H-D TOUR-PaK®
included items: Lid Organizer Bag, Hook-&-loop mounting Strips, 5” x 7” mirror
MULTI-FIT
LID ORGANIZER BAGS
Dim: 13” x 20” (open)
4134
Fits: H-D King, Ultra, or Chopped Tour-Paks (Does
not fit leather Tour-Paks)
4134 Lid Organizer for H-D Tour-Pak (ea)
FOR TRiKE TRUNK
4177
included items: Lid Organizer Bag,
mounting Brackets & Hardware
Dims: 10” x 17” (open)
Fits: ‘10-’11 Street Glide Trike &
‘09-’13 Tri Glide Ultra Classic
5260
5260 Lid Organizer for
Trike Trunk (ea)
REMOVABLE LINERS
Keep things organized, they have handles & a shoulder strap to make
unloading & carrying your luggage quick & easy.
4170
4170 Saddlebag Liners (pr)
Fits: all H-D OEm hard & leather Road King Saddlebags
4177 H-D Tour-Pak Liner (ea)
4175
UNIVERSAL
BAG MOUNTING KIT
mount virtually any Küryakyn motorcycle
Luggage or similar luggage with D-rings
on lower portion of bag, with our
Universal Bag mounting Kit.
iNCLUDES
1 - Universal adjustable Under Seat
mounting Pad
2 - Universal adjustable Fold-Over
Hook-&-loop Straps with Securing
metal End Hook, 36” Long by 1” Wide
(Working Length 26”)
2 - Universal Hook-&-loop Straps, 8” Long
by 1” Wide
4 - Universal adjustable Strap with Clips &
Securing metal End Hook, 32” Long by
1” Wide
4175
Universal Bag mounting Kit
note: Under Seat motorcycle Pad not SUggeSted for
4140 fUll dreSSer bag when exPanded or
other bagS taller then 18”. Under Seat moUnting
USe with
Pad reqUireS a Smooth or receSSed SUrface Under
PaSSenger Seat. not SUggeSted for h- d v- rod,
badlander Style SeatS, or PaSSenger SeatS that are
Smaller than
6” wide & 1.5” thicK.
TOURING BAG SUPPORT PLATFORM by c. e. smith inc.
U.S. Patent
6,299,042
Holds your luggage neat & upright for a more balanced load &
prevents bags from sagging. made of
engineered polymers for strength &
durability, it easily attaches to an
existing luggage rack with the included
industrial grade-exterior hook-&loop straps with large mounting
holes that allow limitless mounting
points for your luggage. Large
enough to accommodate even
the largest of bags, yet mounts
without looking bulbous &
awkward.
7146
MULTI-FIT
Touring Bag
Support (ea)
note: for USe with lUggage racKS only.
doeS not moUnt on Seat.
TIE-DOWN BRACKET/CABLE GUIDE
mounting hole accepts up to a 3/8” (or m10) screw.
Fits: Universal applications as tie down bracket. as a
cable guide replaces H-D OEm 38623-68
4179 Tie Down Bracket (pr)
MULTI-FIT > LUGGAGE
211
BAGS + BRACKETS + HARDWARE = THE COMPLETE PACKAGE
1.
2.
3.
SELECT BaG THaT BEST FiTS yOUR STyLE & NEEDS
SELECT CORRECT BRaCKET aCCORDiNG TO BaG CHOiCE
& mOTORCyCLE aPPLiCaTiON
SELECT CORRECT mOTORCyCLE SPECiFiC mOUNTiNG KiT
No One Does It Better!
qUiCK DiSCONNECT!
5392
Outfit your bike with great looking saddlebags that outperform the rest – but also
gain the freedom of having the ability to take the bags off when you don’t need them!
Küryakyn has teamed up with Edge Leather & Edge quick Detachable Brackets to bring you the most complete, versatile quick
Release System in the industry. Once the correct brackets are installed, put on or take off your saddlebags (with no tools) in mere
seconds & no obnoxious hardware is left behind!
Purchase a Complete Package or purchase the Edge Brackets alone to be used with OEm or other brand bags.
1
mOST DURaBLE & EaSy qUiCK DiSCONNECT SaDDLEBaGS ON THE maRKET!
SADDLEBAGS
locK
remaining docKing hardware
locK
MODEL 102
MODEL 104
Dim: 20” Long x 7-1/2” Wide x 11-1/2” High
Dim: 23” Long x 8” Wide x 13-3/4” High
MODEL 105
Dim: 19-1/4” Long x 7-1/4” Wide
x 12-3/4” High
5380 Plain (pr)
5384 Plain (pr)
5381 Studded (pr)
5385 Studded (pr)
5370 Plain-Lockable (pr)
5372 Plain-Lockable (pr)
5371 Studded -Lockable (pr)
5373 Studded-Lockable (pr)
5382 Plain (pr)
rectangle locK
circle locK
5383 Studded (pr)
rectangle locK
circle locK
locK
MODEL 110
Slanted to accommodate for shocks.
Works great on bikes with high exhaust.
Dim: 20” Long x 7-½” Wide x 11-½“ High
5390 Studded (pr)
5391 Plain (pr)
5375 Studded-Lockable (pr)
circle locK
5374 Plain- Lockable (pr)
MODEL 110XL
MODEL 112
MODEL 108
Slanted to accommodate
for shocks. Works great
on bikes with high exhaust.
Lockable.
Lockable.
Dim: 24” Long x 9”
Wide x 12” High
Dim: 20” Long x 7-3/4”
Wide x 11-1/2” High
Dim: 20” Long x 9-½”
Wide x 11-½“ High
actual length at
mounting point: 18”
5377 Studded (pr)
5392 Studded (pr)
5376 Plain (pr)
5378 Plain (pr)
5386 Plain (pr)
5387 Studded
(pr)
circle locK
212
WWW.ZODiaC.NL
[email protected]
m
3482
3482
3482
3482
3482
3482
3482
Softail® Springer® Classic
‘05-’07
3481
3482
3482
3481
3481
3481
3482
Softail® Heritage Springer®
‘97-’03
3481
3482
3482
3481
3481
3481
3482
all other Softail® Springers with 130-170 stock rear
wheel tire
‘88-’05
3481
3482*
3482*
3481
3481
3481
3482*
all other Softail® Springers with 200 stock rear
wheel tire
‘06-’11
3484
3482*
3482*
3484
3484
3484
3482*
Softail® Deuce™
‘00-’07
3481
N/R
3481
3481
3481
3481
N/R
Softail® Deluxe - FLSTN/FLSTNi
‘93-’13
3482
3482
3482
3482
3482
3482
3482
all other Softail® models with 130-170 stock rear
wheel tire
‘84-’06
3481
3482*
3482*
3481
3481
3481
3482*
all other Softail® models with 200 stock rear
wheel tire
‘06-’13
3484
3482*
3482*
3484
3484
3484
3482*
all
3481
3482
3482
3481
3481
3481
3482
Sportster® models
‘85-’13
3481*
N/R
N/R
3481*
3481*
3481*
N/R
Dyna models
‘93-’13
3482**
N/R
N/R
3482**
3482**
3482**
N/R
Older Harley Big Twin models
m
MULTI-FIT
L1
12
XL
DE
O
m
‘86-’13
m
Heritage Softail®
aPPLiCaTiON
m
m
O
O
DE
DE
L1
10
L1
10
08
DE
O
O
O
DE
DE
L1
L1
05
04
L1
02
L1
DE
O
m
aR
yE
2
BRACKETS
H-D
B a D E Ta
CK
RES CHa
T2 B
Heritage Softail®
‘86-’13
3306
3307
3308
3309
3310
3311
Softail® Springer® Classic
‘05-’07
3307
3307
3309
3309
3311
3311
Softail® Heritage Springer®
‘97-’03
3307
3307
3309
3309
3311
3311
Softail® Springer® Screamin’ Eagle
‘07-’09
3312
3312
3313
3309
3314
3311
all other Softail® Springers w/130-170 stock rear wheel tire
‘88-’05
3306
3307
3308
3309
3310
3311
all other Softail® Springers w/200 stock rear wheel tire
‘06-’11
3315
3307
3313
3309
3314
3311
Softail® Deuce™
‘00-’07
3316
3316
3316
3316
N/R
N/R
Softail® Deluxe - FLSTN/FLSTNi
‘93-’13
3306
3307
3308
3309
3310
3311
all other Softail® models w/130-170 stock rear wheel tire
‘84-’06
3306
3307
3308
3309
3310
3311
all other Softail® models w/200 stock rear wheel tire
‘06-’13
3315
3307
3313
3309
3314
3311
Older Harley Big Twin models 5/16 applications
all
3317
3317
3318
3318
N/R
N/R
Older Harley Big Twin models 3/8 applications
all
3319
3319
3320
3320
N/R
N/R
Sportster® models
‘85-’93
3321
3321
N/R
N/R
N/R
N/R
Sportster® models
‘94-’03
3322
3322
3323
3323
3324
3324
Sportster® models
‘04-’13
3325
3325
3326
3326
3327
3327
Dyna models
‘93-’03
N/R
3328
N/R
3328
N/R
3329
Dyna models
‘04-’05
N/R
3328
N/R
3328
N/R
3330
Dyna models
‘06-’13
N/R
3331
N/R
3331
N/R
3332
1: for USe with P/n 3481 or 3484 bracKetS
LE
LE
H-D
B a D E Ta
CK
RES CHa
T1 B
Ha
R
B a DmO
CK U
RES NT
T2
CK
Ba
NO
Ha
R
B a DmO
CK
RES UNT
T1
RES
T1
RES
Ba
CK
aPPLiCaTiON
NO
aR
yE
3
MOUNTING KITS
T2
* tUrn Signal relocation reqUired
** tUrn Signal relocation reqUired (excePt on ‘07-’11 fat bob & ‘96-’08 wide glide)
*** all oem & aftermarKet bagS that are molded on the inner (fender) Side of the motorcycle reqUire a molded bag bolt Kit (P/n gb1-SK- oem-bag)
n/r - not recommended
MULTI-FIT
2: for USe with P/n 3482 bracKet
MULTI-FIT > LUGGAGE > SADDLEBAGS
213
RE-USES STOCK HaRDWaRE FOR a
TRUE BOLT-ON EXPERiENCE!
FAIRING FACTORY EXTENDED SADDLEBAGS
Hands down, these are the best saddlebags available!
Sturdy, injection molded aBS construction ensures perfect fit
& the extended length provides extra usable storage space
& a great custom look!
FEaTURES
stock locations. Re-use stock hardware for a true
bolt-on experience.
minimal prep required before priming & paint
8647, 7764)
(H-D P/N 90962-93) & lid gaskets –sold separately.
(See Below)
Fits: ’93-’13 H-D Touring models
5369
Fairing Factory Extended aBS
Saddlebags (set)
FAIRING FACTORY SADDLEBAG HINGE/LATCH KITS
Everything you need (except Lock Fasteners) to completely
outfit a set of Extended Bags.
Fits: Fairing Factory & ‘93-’13 H-D Hard Saddlebags
5398
With Swingblade Style Latch Covers (kit)
5399
With OE Style Latch Covers (kit)
5399
5398
note: locKS and locK faStenerS mUSt be PUrchaSed from an aUthorized h-d
dealerShiP. P/n 5399 inclUdeS reflectorS.
5389
5388
5379
EDGE SADDLEBAG ACCESSORIES
5379 Personal Pouch (ea)
5388 Saddlebag Cup Holder (ea)
5389 EEZ Carry Leather Handle (ea)
TURN SIGNAL RELOCATOR KIT
Get the best of both worlds! Now you can mount a set of Edge Saddlebags & keep your stock turn
signals. This kit takes all the guess work out of relocating your stock signals by moving them from the
fender to the license plate area.
3155 Turn Signal Relocator (kit)
note: the Side moUnt bracKetS have Several moUnting PointS for lightS
KüryaKyn cUrved licenSe Plate frameS.
214
WWW.ZODiaC.NL
[email protected]
& will accePt all h-d oem rear tUrn SignalS. will not worK with
MULTI-FIT
Touring & Comfort
ROYAL RIDING GEL SEAT PADS
NEW & imPROVED “GRiPPy” BOTTOm!
Simply the finest, most comfortable, highest quality pad
on the market today. 30-day Satisfaction Guarantee!
Constructed with 1/2” advanced viscoelastic molded gel &
1/4” layer of memory foam & covered with either genuine
sheepskin or plush neoprene, these covers come in a variety
of sizes & styles that will keep you happy - No matter how
long your ride.
1/2” GEL
NEOPRENE OR
SHEEPSKiN PREmiUm
COVERiNG
DimENSiONS
SmaLL
7”W X 11”L
5225
5231
5237
mEDiUm
12”W x 12”L: Tapers to 5”W
5226
5232
5238
LaRGE
5227
5233
--
--
LaRGE RELiEF
5228
5234
--
-
XL
5229
5235
5239
TOURiNG
18”W x 17”L
5230
5236
5240
(with tailbone notch)
SmaLL
mEDiUm
LaRGE
NEOPRENE SEaT PaD
2 LayERS OF
FOam iNSULaTiON
SiZE
(with tailbone notch)
SHEEPSKiN SEaT PaD
mEmORy FOam
LaRGE RELiEF
with tailbone notch
XL
RaiN COVER
TOURiNG
with tailbone notch
COOL-CUSH VENTILATED PAD by royal riding
MULTI-FIT
all of the same great features of the Royal Riding gel & memory foam pads but now
with the added benefit of a ventilated top for maximum air flow. memory foam & gel
help to cushion the rider while the ventilated top keeps the rider cool by allowing air to
move & reduces the heat buildup between the rider & the seat. No more monkey butt!
for Convenience & Safety
5245
5241 Small (ea) – Fits: Universal – Pad Dims: 7”W X 11”L
5242 medium (ea) – Fits: Universal – Pad Dims: 12”W x 12”L: Tapers to 5”W
5243 Large (ea) – Fits: Universal – Pad Dims: 14”W x 11”L: Tapers to 8”W
5244 Large w/Tailbone Notch (ea)
Fits: Universal – Pad Dims: 14”W x 11”L: Tapers to 8”W - Has Cutout for Tailbone Relief
5245 XL (ea) – Fits: Universal – Pad Dims: 16”W x 12”L: Tapers to 9”W
5246 Touring (ea) – Fits: Universal – Pad Dims: 18”W x 17”L
MULTI-FIT > LUGGAGE > SADDLEBAGS & TOURING & COMFORT > SEAT PADS
215
qUiCK RELEaSE BaCKREST &
FOLD-DOWN LUGGaGE RaCK iN ONE!
1606
TRANSFORMER™ BACKREST/LUGGAGE RACK
U.S. Patent 6,966,471 & Patent Pending
Literally fold down the inconspicuous luggage rack right out of the backrest
when needed & hide it away securely with the integrated thumb nut when
you don’t. your passenger is happy, you can always bring your things, &
your bike looks awesome. mounts directly to the required Küryakyn quick
Detach Side Straps (below).
Fits: Kürykayn quick Release Side Plates Only - See chart below to select
Side Plates & attachment Kit
1606 Transformer Backrest (ea)
1630 Service Kit for quick Release Side Plates (ea)
KüryaKyn qUicK releaSe Side PlateS are comPatible with h-d detachable
docKing KitS if the biKe iS already So eqUiPPed:
00, 53930-03, 53822-00, 53931-03, 53009-03, or 53075-03
TRaNSFORmER BaCKREST, qUiCK RELEaSE SiDE PLaTES, & aTTaCHmENT KiTS aRE SOLD SEPaRaTELy.
REViEW CHaRT BELOW CaREFULLy & ORDER BOTH iTEmS LiSTED FOR yOUR PaRTiCULaR aPPLiCaTiON.
quick Release Side Plates
TOURING APPLICATIONS
U.S. Patent
8,267,613
quick Release
attachment Kits
’09-’13 Electra Glide Standards, Road Glides, Street Glides, & Road Kings
1634
1635
’94-’08 Electra Glide Standards, Road Glides, Street Glides, & Road Kings
1636
1637
SPORTSTER APPLICATIONS
U.S. Patent
all ’04-’13 Sportsters1
8,267,613
1638
1639
SOFTAIL APPLICATIONS
U.S. Patent
quick Release
attachment Kits
8,267,613
quick Release
attachment Kits
’00-’13 FLSTC Heritage Classic with Stock Saddlebags
1644
1642
’00-'13 FLSTC Heritage Classic with H-D Hard Saddlebags (90224-00)
1640
1642
’00-’03 FLSTS Heritage Springer with Stock Saddlebags
1644
1642
’05-'13 FLSTN Deluxe with or without H-D P&a Saddlebags or Hard Saddlebags (90725-00)
1640
1642
’05-’07 FLSTSC Springer Classic with or without H-D P&a Saddlebags (except Heritage Bags)
1640
1642
’05-'07 FLSTSC Springer Classic with H-D Hard Saddlebags (90224-00 or 90225-00)
1640
1642
’05-’07 FLSTSC Springer Classic with Heritage Saddlebags
1644
1642
’06 FLST Heritage with or without H-D P&a Saddlebags (except Heritage Bags)
1640
1642
’06 FLST Heritage with H-D Hard Saddlebags (90224-00)
1640
1642
’06 FLST Heritage with Heritage Saddlebags
1644
1642
’00-'05 FXST, FXSTB, FXSTS, '00-'06 FLSTF with or without H-D P&a Saddlebags
1640
1642
’00-'05 FXST, FXSTB, FXSTS, ’00-’06 FLSTF with H-D Hard Saddlebags (90225-00, or 90715-00)
1640
1642
’06-'10 FXST, FXSTB, FXSTS, FXSTC, & ’07-’08 FXSTSSE with or without H-D P&a Saddlebags2
1641
1642
’06-'09 FXST, FXSTB, FXSTS with H-D Hard Saddlebags (90225-00)
1641
1642 v
’07-'13 FLSTF, '08-'11 FLSTSB, '10-’13 FLSTFB, '06 FLSTFSE without Saddlebags
1641
1642
’07-'13 FLSTF, '10-’13 FLSTFB with H-D Hard Saddlebags (90715-00)
1641
1642
1. SPortSter modelS eqUiPPed with h-d hard SaddlebagS (91412-0x) mUSt PUrchaSe hardware Kit 91405-04 from an aUthorized h-d dealer.
2. ’07-’10 fxStc reqUireS SeParate PUrchaSe of fender moUnted Seat.
216
WWW.ZODiaC.NL
[email protected]
8980
U.S. Patent d415,980 & 5,984,331
1605
Here’s the easy solution for the rider who carries a passenger but
8998of conventional side plates. The Plug-N-Play
doesn’t like the look
bolts to the rear fender underneath the passenger seat. it accepts
our low, custom Sissy Bar (P/N 8980) & Backrest Pad (P/N 1605)
for passenger comfort & convenience. The backrest & pad measures
6-3/4” wide & 9-1/2” high from the rear fender.
6-3/4”
MULTI-FIT
PLUG-N-PLAY
8998
8998 Plug-N-Play (ea)
8998
Fits: H-D models with 130mm, 140mm, or
150mm tires (Softail, Dyna, Sportster, FXR) (ea)
8980 Sissy Bar (ea)
1605 Backrest Pad (ea)
note: each PlUg - n - Play aSSembly iS Pre- drilled, bUt doeS not inclUde
moUnting hardware. SiSSy bar
& bacKreSt Pad come with all neceSSary
10”.
moUnting hardware. bacKreSt height not to exceed
1622
RAPTOR BAR PLUS
TaLL
1587
all the style you’ve come to expect now
with even more comfort thanks to the
updated, more plush backrest pad. at
12” tall, this forged bar is just the right height to
keep your passenger happy & the bike looking good.
1588
5-1/4” x 9-3/4”
SHORT
8-3/4”
5-1/4” x 7”
BACKREST COMPONENTS
SiSSy BaRS
Fits: Stock or P&a H-D Sideplates & others with 8-3/4”
outside mounting dimension & 1/2” square stock mounting
with 1-1/4” mounting hole spacing
1587 Short Sissy Bar 15” Tall (ea)
Fits: H-D & Standard Universal metric 8-3/4” wide
mounting with 1/4”-20 tapped threads - Requires
mounting straps for installation (sold separately)
1622
Raptor Bar Plus (ea)
MULTI-FIT
note: not comPatible with Side PlateS for tranSformer bacKreSt.
1622
1588 Tall Sissy Bar 20” Tall (ea)
note: theSe SiSSy barS are not comPatible with KüryaKyn fold down
lUggage racK (P/n
1558), or Side PlateS for tranSformer bacKreSt.
BaCKREST PaDS
Fits: Küryakyn Sissy Bars (except Raptor), or other 1/2”
square Sissy Bars with the same dimensions (4” inside
to inside)
1601 Tall Backrest Pad (ea)
1602 Tall Backrest Pad with Button (ea)
1603 Short Backrest Pad (ea)
1604 Short Backrest Pad with Button (ea)
MULTI-FIT > TOURING & COMFORT > BACKRESTS
217
PREMIER LUGGAGE RACK
With front to back adjustment you can position this rack exactly where
you want. Problem is, with a rack this nice, you won’t want to cover it
up with luggage!
Fits: all Küryakyn Side Straps & Sissy Bars (except Transformer Backrest P/N 1606)
Softail: all ’84-’13 models (except ’00-’07 FXSTD & ’06-’13 FX Softail models &
’07-’13 FLSTF, FLSTFB, FLSTSB & FLS) with stock or accessory H-D rigid or
detachable side plates
Dyna: all ’91-’13 models with sissy bar uprights mounted on H-D rigid or detachable
side plates
Sportster: all ’82-’13 models with sissy bar uprights mounted on H-D rigid or
detachable side plates
Universal for aftermarket backrests meeting the following criteria:
Sissy bar to side strap mounting bolts 1/4” – 20 with 1-3/16” to 1-5/16” center to
center spacing
inside width between side straps must be 5-5/8” to 6” or 7-1/4” to 7-1/2” or outside
width of side straps must be 5-3/8” to 5-5/8” or 7” to 7-1/4”
7156 Premier Luggage Rack (ea)
note: inStallation reqUireS a Pre- exiSting bacKreSt with
Side moUnting PlateS for inStallation.
1/4”-20 moUnting boltS with bacKreSt that boltS to
FOLD DOWN LUGGAGE RACK
U.S. Patent 6,966,471
When you need to strap on a travel bag, just pull down the Folding Luggage Rack. When
you don’t, the rack hinges back up against the backrest, conveniently out of the way.
includes everything you need for installation.
1558 Fits: all ’84-’05 Softails (except Deuce) & ’06-’13 FL Softail models (except ’06
FLSTFSE, ’07-’13 FLSTF, ’10-’13 FLSTFB, ’08-’11 FLSTSB, ‘12-’13 FLS) with stock or
accessory “Low” (11”) sissy bar uprights mounted on H-D Rigid or Detachable
Side Plates ’06-’13 Dynas (except ’08-’13 FXDF, ’09-’10 FXDFSE, ’10-’13
FXDWG) with stock or accessory “Low” (11”) sissy bar uprights mounted on
H-D Rigid or Detachable Side Plates ’04-’13 Sportsters with stock or accessory
“Low” (11”) sissy bar uprights mounted on H-D Detachable Side Plates
Revolutionary!
checK oUt oUr folding driver/PaSSenger
bacKreSt/lUggage racK!
mULTi-PURPOSE DRiVER &
PaSSENGER BaCKRST
FOR TOURiNG
pg
68
mULTi-PURPOSE DRiVER &
PaSSENGER BaCKRST
FOR SOFTaiL
pg
218
WWW.ZODiaC.NL
102
[email protected]
MULTI-FIT
rider Shown
iS 6’ tall
QUICK RELEASE WINDSHIELDS
FEaTURES
6° of angle adjustment - Eccentric lower mounting point can be positioned forward or back during installation to tailor
windshield angle
Premium .125” Optical Grade, Hard-Coated Polycarbonate
interchangeable Zombie & Grooved Emblems
Unsurpassed style - Unlike flat, plain-looking outer cross & vertical hardware, our stainless steel outer hardware is
beautifully stamped & chrome-plated for a rich, classy appearance
Three heights; Low, mid, Tall – Choose your own look & level of wind protection
WINDSHIELD STYLES
MOUNTING KITS
aLL WiNDSHiELDS
FOR 39mm NaRROW GLiDE
2614
LOW
SmaLL CUT-OUT
22”
2614
Light Smoke (ea)
2615
Clear (ea)
LaRGE CUT-OUT
23”
2612
Fits: ’88-’13 Sportster models (except ’09-’12 XR1200/X,
’10-’13 XL1200X, ’11-’13 XL883L & ‘11-’13 XL1200C), ’91-’05
Dyna models (except ’93-’05 FXDWG), ’88-’94 FXR
models, & ’99-’00 FXR2/3/4
2600 For 39mm Narrow Glide (ea)
chooSe windShield with Small cUt-oUt
2620
Light Smoke (ea)
FOR 41mm WiDE GLiDE
2621
Clear (ea)
Fits: ’85-’10 FXST models (except Springer, Deuce
& Rocker/C), ’93-’05 FXDWG, & ’80-’85 FXWG
2601 For 41mm Wide Glide (ea)
MID
chooSe windShield with Small cUt-oUt
SmaLL CUT-OUT
24-½”
2612
Light Smoke (ea)
2613
Clear (ea)
LaRGE CUT-OUT
2618
Light Smoke (ea)
2619
Clear (ea)
FOR HERiTaGE, DELUXE, & FaT BOy
Fits: ’05-’13 Deluxe, ’90-’13 Fat Boys, ’86-’13 FLST/C,
’93-’96 FLSTN, ‘12-’13 FLS
2602 For Heritage, Deluxe, & Fat Boy (ea)
MULTI-FIT
chooSe windShield with large cUt-oUt
23”
2600
TALL
2611
26-¾”
2601
2602
SmaLL CUT-OUT
2610 Light Smoke (ea)
2611
Clear (ea)
LaRGE CUT-OUT
2616 Light Smoke (ea)
2617 Clear (ea)
23”
aTTENTiON HERiTaGE CLaSSiC RiDERS! iF yOUR
STOCK WiNDSHiELD iS HaZy & BEaT UP, aNy OF
OUR LaRGE CUT-OUT WiNDSHiELDS CaN BE USED
WiTH yOUR STOCK BRaCKETS - SEE CLEaRLy & aDD
STyLE aT a GREaT PRiCE!
MULTI-FIT > TOURING & COMFORT > BACKRESTS & WINDSHIELDS
219
VERTICAL MOUNT FLAGS
Pride. Love of Country. Respect. Whatever the
reason you choose to display Old Glory or
remember our P.O.W.’s, these flags deserve to be
displayed with honor & in their best light. mount straight, securely,
& with dignity. 1/2” version fits most luggage racks or any 1/2” tubing
including front fender rails. 3/4” version fits saddlebag rails or any 3/4” tubing.
american Flag is 6” x 11” & P.O.W. mia Flag is 6” x 9”.
4255
4254
4254 1/2” Vertical Flag mount (kit)
4255 3/4” Vertical Flag mount (kit)
4262 Replacement american Flag (ea)
4263 Replacement P.O.W. Flag (ea)
FLAG POLE
for luggage rack
Fly your flag proudly on your
luggage rack with the new &
improved one piece highly stylized flagpole.
it provides more durability & the improved
reinforced ratcheting system allows you to
adjust the angle of the staff without tools.
includes 4” x 9” american flag.
4259 Flag Pole for Luggage Rack (ea)
Fits: 1/2” Diameter Round Tube
4271 Canadian Flag, 4” x 9” (ea)
rePlacement for P/nS
4215, 4216,
4233, 4249, 4253, 4259, 4260,
& 4261)
SIDE MOUNT FLAG KIT
by fine art tranSformationS
machined from aluminum, this sturdy mount is easy to install. a single bolt
tightens the two clamp halves around the chrome Saddle Bag Guard that comes
standard on the FLHTC & FLHTCU. The flag mount is also compatible with Ultra
Limited, Road King, Road Glide & FLHT Standard if H-D’s chrome Saddle Bag
Guard kit is installed. P.O.W. & Crossbones are 9” x 14” & the american Flag is
9” x 18”. includes 12” & 18” Staffs, american, P.O.W. & Crossbones Flags.
4208 Side mount Flag Kit (ea)
4266 Replacement Crossbones Flag (ea)
4267 Replacement P.O.W. Flag (ea)
LICENSE
PLATE MOUNTED FLAG
Bolts behind most license plates quickly &
easily. The reinforced ratcheting system allows
for easier adjustment & better durability.
One-piece flagpole. (4” x 9” american Flag)
Fits: Universal application (Ensure motorcycle’s
license plate mount is sturdy enough to
support force applied by at flag speed)
4261 License Plate mounted Flag (ea)
4271 Canadian Flag, 4” x 9” (ea)
rePlacement for P/nS
4215, 4216,
4233, 4249, 4253, 4259, 4260,
& 4261)
4274
4271
4272
4273
THEMED FLAGS for flag holders
ANTENNA MOUNT FLAG
Flags measure 4” x 9” & are specifically
made for Küryakyn flag mounts.
includes both american flag
& a plain, customizable white
flag to help you stand out at
the next rally. (Flags measure
6” x 8”)
Fits: Küryakyn Flag mounts (P/N’s 4215, 4216,
4233, 4249, 4253, 4259, 4260, & 4261)
4271 Canadian Flag (ea)
4272 Don’t Tread On me Flag (ea)
4217 antenna mount
Flag (ea)
4273 Pirate Flag (ea)
4274 Blank Flag (ea)
4264 Replacement american
Flag (ea)
220
WWW.ZODiaC.NL
[email protected]
MULTI-FIT
x
x
Performance
MULTI-FIT
BUiLDiNG THE mOST TECHNOLOGiCaLLy aDVaNCED PERFORmaNCE PaRTS ON THE maRKET!
We took a good look at what was going on in
the H-D performance world & figured there had
to be a better way. many so-called innovations
were rehashes of existing designs. Our innovative
products are designed to not only make big
power, but to solve some of the normal problems
associated with high output engines such as hard
starting, detonation (pinging), poor drivability &
top-end noise. Wild Things kits can make up to
130+ horsepower & 120+ pound-feet of torque,
but be as street friendly as it gets.
The Wild Things line includes a wide range of
cams including the most powerful bolt-in cams
available, highly technologically advanced
cylinder heads, pistons, high-flow throttle bodies,
high flow air cleaners & performance exhaust.
We are putting tremendous effort into developing
more new & advanced performance parts.
®
miKE ROLaND
WORLD CLASS TUNING CENTER
Dealer Bonus:
Küryakyn’s tuning center, World Class Tuning, hosts training
seminars for our dealers’ technicians & also tunes HarleyDavidsons for the general public.
FOR mORE iNFORmaTiON ViSiT WWW.KURyaKyN.COm.
MULTI-FIT > PERFORMANCE > PERFECT STORM
221
WHAT IS THE PERFECT STORM
?
™
AIR CLEANER
TUNER
EXHAUST
WHEN COMBINED OUR
3 COMPONENTS CREATE:
Throughout Entire Rpm Range
your Passenger
california cUStomerS – PleaSe viSit KUryaKyn.com for
information regarding carb comPliance before ordering.
AVAILABLE FOR
TOURING
AIR CLEANERS - 224
TUNER - 233
EXHAUST - 80
222
WWW.ZODiaC.NL
SOFTAIL
AIR CLEANERS - 224
TUNER - 233
EXHAUST - 106
[email protected]
DYNA
AIR CLEANERS - 224
TUNER - 233
EXHAUST - 116
MULTI-FIT
THE PERFECT STORM
™
+
TAKE YOUR STORM TO THE NEXT LEVEL BY ADDING OUR NEW BOLT-IN CAMS!
+
TC-24D CAMS
CAMS
The bolt-in cam for late model Harley’s! The results are staggering
when combined with the award winning Perfect Storm. Power delivery is
strong & consistent throughout the rev range, while idle & cruise are silky smooth.
120
120
100
100
80
80
60
60
40
40
20
20
0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Engine Speed (RPM x1000)
6.0
0
7.0
Test done on 2012 Street Glide 103
Perfect Storm +
(Perfect Storm and TC-24D
Puller Cam)
104 hP & 112 ft. lb of torqUe
Perfect Storm
Stock
teSting done on
6.5
MULTI-FIT
Torque (ft-bls)
Power (hp)
mORE iNFORmaTiON & SPECS - PG 236 & 237
‘12 Street glide 103” motor with no other modificationS other than liSted above
MULTI-FIT > PERFORMANCE > PERFECT STORM
223
Performance
AIR CLEANERS
NEW
CO-aX!
MACH 2™ &
MACH 2™ CO-AX
impress with it’s beauty & stun with it’s performance! The new
& improved mach 2 is the best performing, best looking, & best
fitting air cleaner on the market today.
CaPaBLE OF
SUPPORTiNG ENGiNE
BUiLDS UP TO 150 H.P.!
FiTmENT
maCH 2™
maCH 2™
maCH 2™
maCH 2™
maCH 2™
CO-aX
maCH 2™
CO-aX
CHROmE
CHROmE ZOmBiE
BLaCK & CHROmE
BLaCK
CHROmE
BLaCK
’91-’06 XL with CV Carb
9453
--
9533
9551
9567
9573
’07-’13 XL models
9871
--
9549
9555
9568
9574
’93-’99 Evolution Big Twin with CV Carb
9454
--
9534
9552
9569
9575
’99-’13 Twin Cam with CV Carb, Delphi
EFi (except ’08-’13 Touring/Trikes,
’11-’12 FLSTSE & ‘13 FXSBSE)
9455
9458
9535
9553
9570
9576
’08-’13 Touring models, Trikes, ’11-’12
FLSTSE & ‘13 FXSBSE
9456
9459
9536
9554
9571
9577
air Cleaner assembly Only
9451
9514
9550
9566
9572
note:
--
‘11-’13 flhtcUSe, ‘09 fltrSe, ‘11 fltrUSe, ‘12-’13 fltrxSe, ‘10-’12 flhxSe, ‘13 flhrSe, ‘11-’12 flStSe & ‘13 fxSbSe alSo reqUire throttle body SUPPort bracKet (P/n 9929,
Sold SeParately).
CUSTOMIZE YOUR MACH 2™ !
CHROmE mEDaLLiONS
3714
3796
3764
3752 Helicopter
3754 Firefighter (ea)
3754
3798
3795
3764 Deco (ea)
3795 Flame (ea)
3799
3752
3796 Widow (ea)
3797 Zombie (ea)
3713
3797
3798 Chauvinist (ea)
3799 Patriot (ea)
BLaCK mEDaLLiONS
224
WWW.ZODiaC.NL
[email protected]
9547
Gunship (ea)
CO-aX UPDaTE KiT
9547
Chrome Update Kit
9548 Black Update Kit
BLaCK mESH BaSKET
9558 Black mesh
Basket (ea)
SPiKES
3713 Widow (ea)
9556
3714 Zombie (ea)
9557 Chrome (5 pcs)
Black (5 pcs)
MULTI-FIT
ALLEY CAT AIR CLEANER
This cat is sure to make you purr! We’ve combined
our super high-flowing Street Sleeper® ii air
Cleaner with our new sleek alley Cat Cover into
one easy-to-install kit!
VELOCIRAPTOR® AIR CLEANER
STREET SLEEPER® II
Unlike most velocity stacks on the market, ours
breaths well & filters the air with it’s K&N washable
filter. The Super Ring insert covers up the mounting
bolts delivering smooth airflow into your motor.
Only Küryakyn engineers could figure out how to put the ultra
high flowing end breathing element in an air cleaner that hugs
so close to the Harley engine.
MULTI-FIT
B
VELOCiRaPTOR®
STREET SLEEPER® ii
aLLEy CaT
aLLEy CaT
RETaiNS STOCK OVaL aiR
CLEaNER (NOT iNCLUDED)
CHROmE
BLaCK & CHROmE
--
--
--
9510
--
--
--
9872
’93-’99 Evolution Big Twin w/
CV Carb
--
--
--
9511
FiTmENT
’99-’13 Twin Cam with CV Carb
or Delphi EFi (except ’08-’13
Touring/Trikes, ’11-’12 FLSTSE &
‘13 FXSBSE)
9537
9515
9517
9512
’08-’13 Touring models, Trikes,
’11-’12 FLSTSE & ‘13 FXSBSE
9530*
9508
9516
9513
--
--
--
9870
*throttle Servo motor cover (P/n 8659) iS not comPatible with Street SleePer ii & StocK air cleaner cover.
note: ‘11-’13 flhtcUSe, ‘09 fltrSe, ‘11 fltrUSe, ‘12-’13 fltrxSe, ‘10-’12 flhxSe, ‘13 flhrSe, ‘11-’12 flStSe & ‘13 fxSbSe alSo reqUire throttle body SUPPort
bracKet (P/n 9929, Sold SeParately).
MULTI-FIT > PERFORMANCE > AIR CLEANERS
225
CORSAIR™ AIR CLEANER
The best, non-restrictive, forward facing air cleaner you can buy.
Chrome-plated die-cast housing with high-flow filter element supplied
by advanced Flow Engineering (aFe) all in an easy to install package.
SKULL AIR CLEANER
TWIN VELOCITY™ PLUS
Not for the faint of heart, our Skull air Cleaner Kits are a vile and sinister
addition to any bad-ass ride. The outer cover is the same high-strength,
extremely rigid composite cover we sell for S&S carbs.
Unique style and great performance all in one
package. Follows the lines of the classic V-twin
engine for a one of a kind look.
CORSaiR™
FiTmENT
SKULL
SKULL
CHROmE
BLaCK CHROmE
TWiN VELOCiTy™
9860
9941
--
--
9868
9869
--
--
’93-’99 Evolution Big Twin with CV
Carb
9861
’99-’13 Twin Cam with CV Carb or
Delphi EFi (except ’08-’13 Touring/
Trikes, ’11-’12 FLSTSE & ‘13 FXSBSE)
9861
9944
9947
’08-’13 Touring models, Trikes,
’11-’12 FLSTSE & ‘13 FXSBSE
9864
9946
9948
9862
9945
--
--
9831
9832
--
--
--
note:
‘11-’13 flhtcUSe, ‘09 fltrSe, ‘11 fltrUSe, ‘12-’13 fltrxSe, ‘10-’12 flhxSe, ‘13 flhrSe, ‘11-’12 flStSe & ‘13 fxSbSe alSo reqUire throttle body SUPPort bracKet
(P/n 9929, Sold SeParately).
note: corSair not comPatible with fairing lowerS eqUiPPed with glove boxeS.
226
WWW.ZODiaC.NL
[email protected]
U.S. Patent 5,307,771
PRO-SERIES HYPERCHARGER™
U.S. Patent 5,307,771
STANDARD HYPERCHARGER™
U.S. Patent 5,307,771
MULTI-FIT
PRO-R HYPERCHARGER™
(over 130 hP with P/n 8498 Stinger UPgrade)
FiTmENT
PRO-R HyPER
PRO-SERiES HyPER
PRO-SERiES HyPER
STaNDaRD HyPER
STaNDaRD HyPER
CHROmE
CHROmE WiTH CHROmE
BUTTERFLiES
CHROmE WiTH
BLaCK BUTTERFLiES
CHROmE TRaP DOOR &
BUTTERFLiES
BLaCK TRaP DOOR
& BUTTERFLiES
’91-’06 XL with CV
Carb
9320
9300
9328
9327
’93-’99 Evolution
Big Twin with CV
Carb
9321
9301
9303
8469
--
9304
8467
9326
8464
-8462
MULTI-FIT
’95-’98 Evolution
Big Twin with EFi*
--
9308
--
9734
--
’99-’01 Twin Cam
Touring with EFi*
--
9307
--
9774
--
with Delphi EFi
9323
9311
9312
9763
9759
with CV Carb,
‘06-’13 w/Delphi
EFi (except ’08-’13
Touring/Trikes,
’11-’12 FLSTSE & ‘13
FXSBSE)
9322
9302
9305
9754
9751
’08-’13 Touring
models, Trikes,
’11-’12 FLSTSE & ‘13
FXSBSE
9325
9315
9316
9767
9765
air Cleaner
assembly Only
9324
9306
--
8446
--
*reqUireS drilling a hole in manifold to SUPPly a vacUUm SoUrce
note: ‘11-’13 flhtcUSe, ‘09 fltrSe, ‘11 fltrUSe, ‘12-’13 fltrxSe, ‘10-’12 flhxSe, ‘13 flhrSe, ‘11-’12 flStSe & ‘13 fxSbSe alSo reqUire throttle body SUPPort
bracKet (P/n 9929, Sold SeParately).
MULTI-FIT > PERFORMANCE > AIR CLEANERS
227
BLOOD GROOVE HYPERCHARGER™
U.S. Patent 5,307,771
Küryakyn offers a select number of complete Hypercharger Kits assembled with a Blood Groove Trap Door.
The Blood Groove Trap Doors offer a styling alternative to standard trap doors; you get the same impressive
performance no matter which style you choose. Complete kits are listed for most popular applications.
DON’T SEE yOUR aPPLiCaTiON?
mORE FOUND ONLiNE
FiTmENT
BLOOD
GROOVE HyPER
BLOOD
GROOVE HyPER
BLOOD
GROOVE HyPER
BLOOD
GROOVE HyPER
aLL CHROmE
CHROmE WiTH BLaCK
BUTTERFLiES
aLL BLaCK
WRiNKLE BLaCK
WiTH CHROmE
BUTTERFLiES
9995
9996
9873
’93-’99 Evolution Big Twin with CV Carb
9990
’95-’98 Evolution Big Twin with EFi*
9984
--
--
--
’99-’01 Twin Cam Touring with EFi*
9983
--
--
--
’01-’05 Twin Cam with Delphi EFi
9998
9993
9994
9979
’99-’06 Twin Cam w/CV Carb, ‘06-’13 w/Delphi EFi
(except ’08-’13 Touring/Trikes, ’11-’12 FLSTSE & ‘13
FXSBSE)
9992
9997
9987
9980
’08-’13 Touring models, Trikes, ’11-’12 FLSTSE & ‘13
FXSBSE
9970
9972
9971
9973
9982
-9991
9989
--
9874
--
9988
--
9981
--
--
*reqUireS drilling a hole in manifold to SUPPly a vacUUm SoUrce
note: ‘11-’13 flhtcUSe, ‘09 fltrSe, ‘11 fltrUSe, ‘12-’13 fltrxSe, ‘10-’12 flhxSe, ‘13 flhrSe, ‘11-’12 flStSe & ‘13 fxSbSe alSo reqUire throttle body SUPPort bracKet (P/n 9929,
Sold SeParately).
Performance
AIR CLEANER COVERS & ACCESSORIES
PRE-FILTERS
Kuryakyn uses only K&N & aFe oiled gauze
filters in our air cleaners which, when properly
maintained, are water repellent. Even so, there may
9559
be times you wish you had a pre-filter to keep bugs,
dirt, wash water, or a torrential downpour out of your air cleaner.
These exclusive covers are made for us in the USa by Outerwears. Their
proprietary material is water repellent, UV resistant & filters debris
down to .005”.
STINGER TRAP DOOR
8443 Pre-Filter for Hypercharger (ea)
for hypercharger
9335 Pre-Filter Pro-R/Pro Series (ea)
Designed specifically to maximize airflow into the
carburetor or throttle body, the Stinger’s two large
raised scoops channel air through a high-flow
foam filter element. This is an incredibly cost
effective way to increase air flow in any standard
Hypercharger. Easy four bolt replacement of any
standard trap door. Sit down, shut-up, & hang on!
9559 Pre-Filter for mach 2/alley Cat (ea)
Fits: Standard Hypercharger only
8498 Stinger Trap Door with Filter (ea)
8492 Replacement Filter Element (ea)
228
WWW.ZODiaC.NL
[email protected]
9859 Pre-Filter for Corsair (ea)
PRO-SERIES UPGRADE KIT
available for anyone currently using a new
style (replaceable bearing cup style) Standard
Hypercharger. The kit consists of the new “Pro” large
volume outer case half with bearing cups, butterflies,
larger K&N air filter element, & necessary hardware.
9310
9310 Pro Series Hypercharger Upgrade
(available in Chrome Only)
ALLEY CAT AIR CLEANER COVER
MULTI-FIT
9438
made to fit the Kuryakyn Street Sleeper® ii as well as many other aftermarket
high flow air cleaners. Chrome mesh insert & “knock-off” styled center screw
gives a retro look.
Fits: Screamin’ Eagle Stage 1 air Cleaner kits for ’99-’13 Touring, ’00-’13 Softail,
’99-’07 Dyna; Kuryakyn Street Sleeper ii, & all arlen Ness Stage 1 Big Sucker Kits
9439
Chrome (ea)
9438
Black & Chrome (ea)
note: doeS not worK with neSS Stage ii big SUcKer or the original
KUryaKyn Street SleePer.
9439
OFF
8408
8407
ON
INFINITY™ ACCESSORIES
The smooth, mirror finished outer panels become a
vortex of lights. installs quickly & easily - in under an
hour! Kits include switch & all wiring.
STREamLiNER for standard hypercharger
9938
9940
U.S. Patent 7,029,152
AIR CLEANER COVERS
Fits: Standard Hypercharger only
SCaRaB
8415 infinity Streamliner (ea)
8407
Fits: ’02-’13 Electra Glides, Road
Glides, Street Glides, Road Kings &
Trikes (except Carbureted California models), ’01-’13 Softail models
(except ’08-’11 FLSTSB, ‘11-’13 FXS,
‘12-’13 FLS & Carbureted California
models), & ’04-’07 EFi Dyna models
8408
Fits: all ’99-’03 Dyna models, ’04-’05
California FXD & FXDX, ’99-’06
Carbureted California Electra Glides,
Road Glides, & Road Kings, ’02-’05
California FLHTi, ’00-’06 Carbureted
California Softails
iNFiNiTy™ COVER for stock twin cam air cleaner
U.S. Patent 7,029,152
Fits: Stock ‘99-’06 Twin Cam air Cleaners
8416 infinity Cover (ea)
note:
’07-’13 twin camS with Standard, Single-Screw oval air cleaner
cover can be oUtfitted with an ’06- earlier h- d oUter cover, h- d P/n
29121-01, which will allow inStallation of P/n 8416.
COmPONENTS
4715 Replacement Switch/Controller (ea)
MULTI-FIT
SKULL FOR S&S
4768 250 V, 3 amp Fuse (pr)
Fits: Replaces Tear Drop Cover on S&S E or G air
Cleaner assemblies
9940 Chrome (ea)
9939 Hot Rod Black (ea)
9938 Black Chrome (ea)
MULTI-FIT > PERFORMANCE > AIR CLEANER COVERS & ACCESSORIES
229
9930
9930
3”
9931
9932
STANDARD & LETTERED
TRAP DOORS & BUTTERFLIES
2-1/4”
BLUEGRASS BREATHER KITS
Create a new look in minutes!
all Colored Trap Doors
all Colored Butterflies (pr)
Color
Trap Doors
Butterflies
8482*
8488
24K Gold
N/a
8489*
Black
8478
8484
Candy Red
8479
8485
Candy Blue
8480
8486
Nugget yellow
8420
N/a
mystique Green
8424
N/a
metallic Gray
8426
8427
Violet Pearl
8428
N/a
Victory Red
8430
N/a
Lazer Red
8432
N/a
Sinister Blue
8434
N/a
Raw
8477*
8490*
Chrome
many Harleys puke oil out the breather & down the side of the bikes. The Blue Grass
Breather can cure that. The banjo fittings & chrome tubes route the vented gasses
upward so gravity can keep any expelled oil droplets in the engine. The vent line can
be run up & out or the optional catch tank is available for those who would rather
vent to a closed container.
9930 Bluegrass Breather Kit, Long Leg (ea)
Fits: ’93-’99 Evo Big Twin with mikuni HSR series carb, ’91-’06
Sportster models
9932 Bluegrass Breather Kit, Short Leg (ea)
Fits: ’93-’99 Evo Big Twin (most carbs except mikuni HSR)
’99-’13 Twin Cam with Delphi EFi (except ’08-’13 Touring, Trikes
& ‘11-’12 FLSTSE, ‘13 FXSBSE) & most carbs
9931 Catch Tank (ea)
AIR CLEANER COMPONENTS
maCH 2™, STREET SLEEPER® ii, aLLEy CaT & SKULL
PRO-R & PRO-SERiES HyPERCHaRGER™
9493 Replacement K&N Filter (ea)
8482 Chrome Trap Door
8554 Vacuum Pod Rebuild Kit (ea)
8477 Raw Trap Door
9319 Replacement Cage/Foam Filter assembly (ea)
8489 Gold Butterflies (pr)
9330 Chrome Butterflies(pr)
8490 Raw Butterflies (pr)
note: traP doorS
& bUtterflieS are not for USe on
Pro -SerieS hyPerchargerS.
8476
9331 Black Butterflies (pr)
9332 Pro-Series Butterfly Shaft Caps with Screws, Washers, Bearings, & Spring
(set)
9333 Pro-R Butterfly Shaft Caps with Screws, Washers, Bearings, & Spring (set)
9334 Case Screws for Pro-Series & Pro-R (set/3)
8476
8475
BLOOD GROOVE TRAP DOORS
a quick & classy alternative to the
standard Trap Door. Five minutes & you
have a whole new look.
8475 Black (ea)
8476 Chrome (ea)
230
WWW.ZODiaC.NL
CORSaiR™
9857 Replacement End Cap Kit (kit)
9859 Pre-Filter for Corsair (ea)
88
Filter Oil & Cleaning Kit
TWiN VELOCiTy™
[email protected]
P/N
mODEL #
FiTmENT
CaRB
iNLET
HEaD
aTTaCHmENT
BOLT SiZE
DOES
BRaCKET
USE
REDUCTiON
WaSHERS?
Late
1/2”
yes
5-3/16”
1-3/16”
1-1/8”
Late
5/16”
yes
5-15/16”
1-7/16”
1-5/16”
EVOLUTiON SPORTSTER mODELS
XL-6
’88-’06 with CV mikuni, Rev Tech,
8349
S.E.
DimENSiONS (aBOVE)
a
B
C
PRiCE
MULTI-FIT
CARBURETOR SUPPORT BRACKETS
EVOLUTiON BiG TWiN mODELS
8344
mB 2
’90-’91 with CV
’84-’91 with mikuni, Rev Tech, S.E.
’92-’99 with CV, mikuni, S.E.
Late
1/2”
No
5-15/16”
1-3/8”
1-5/16”
8346
mB 3
’84-’89 with 38mm Butterfly S&S B
Early
5/16”
yes
5-15/16”
1-7/16”
1-5/16”
8587
mB 9
’84-’99 with S&S E or G
Late
5/16” or
1/2”
yes
5-15/16”
2-1/16”
1-5/16”
8591
mF 1
’95-’98 BT with Fuel injection
F.i. Oval
1/2”
No
5-15/16”
1-1/4”
2-1/2”
Late
1/2”
No
5-15/16”
1-3/8”
1-5/16”
F.i. Oval
3/8”
No
5-15/16”
1-1/4”
2-1/2”
5-15/16”
2-1/16”
1-5/16”
8332
TWiN Cam
’99-’06 with CV or HSR42/45/48
’01-’13 with Delphi EFi (except
’08-’13 Touring/Trikes, ‘11-’12
FLSTSE, ‘13 FXSBSE)
8332
8327
mF5
’99-’01 Touring with magnetimarelli EFi
8326
TC9
’99-’06 with S&S E or G
Late
3/8”
No
Chrome Replacement for H-D
27712-08. ‘08-’13 Touring & Trike
& Custom applications on ‘08-’13
CVO Touring & ‘11-’13 CVO Softail
N/a
3/8”
No
9929
COMPLETE MOUNTING KITS for küryakyn air cleaners
includes everything necessary to install a Hypercharger,
Pro-Hyper or Pro-R.
8333 Pre Evo Big Twin or XL with Stock Carb
8553
8535
8338 ’88-’90 XL with Stock Carb
8341 ’91-’06 XL with Stock Carb, includes Küryakyn
8525
8519
Crankcase Breather
8339 ’91-’06 XL with Stock Carb, for use with H-D
CARBURETOR ADAPTERS
Crankcase Breather
9329 ’07-’13 XL
8519 Enrichener for S&S E or G
8335 ’84-’89 Evo Big Twin with Stock Carb or S&S B
8525* S&S E or G
8336 ’90-’91 Evo Big Twin with Stock Carb
8535* Wide S&S E or G, for use with
Screamin’ Eagle breather on
’93-’99 BT & ’91-’03 XL
8337 ’92 Evo Big Twin with Stock Carb
8340 ’93-’99 Evo Big Twin with Stock Carb, includes
8524 mikuni 38mm roundslide
Küryakyn Crankcase Breather
8553 mikuni HSR42/45/48
8342 ’93-’99 Evo Big Twin with Stock Carb, for use with
8511 S&S adapter for Twin Velocity
Screamin’ Eagle Crankcase Breather
9919 ’99-’06 Twin Cam with Stock Carb includes
air Cleaner
Fits: Evolution Big Twin
9924 ’01-’05 Twin Cam with Delphi EFi, includes
note: yoU mUSt alSo order P/n
8519 (Sold SeParately).
9926 ’06-’13 Twin Cam with Delphi EFi (except ’08-’13
MULTI-FIT
Touring/Trikes, ‘11-’12 FLSTSE, ‘13 FXSBSE), includes
*theSe adaPterS reqUire the PUrchaSe of longer breather boltS
when USed with KüryaKyn cranKcaSe breather KitS for evo.
9793 ’99-’06 Twin Cam with S&S E or G, includes
MULTI-FIT > PERFORMANCE > AIR CLEANER COMPONENTS
231
a
d
c
REPLACEMENT COMPONENTS for new style hypercharger™
g
i
b
d
a 9906 Case Bolts &
Washer Set (6 pcs)
G
9911 Chrome Back Half -
B
G
9912 Chrome Back Half -
k
e
9904 Trap Door Screw/
Washer Set (8 pcs)
C 9903 Trap Door Gasket
f
D
h
J
d
A
9910 Chrome Front Half
F
8513 K&N Filter Element
E
F
G
A. CHROME CRANKCASE BREATHER
Keep oil from being ejected into your air
cleaner. Excess oil now runs back down
into the engine rather than back into the
air cleaner to be blown all over your bike.
H
make more room between your air cleaner
& the engine or fuel tank. Compatible with
any CV bolt pattern (late inlet) air cleaner.
8510 7/8” CV Bolt Pattern Spacer
9918 Fits: ’99-’06 Twin Cam
E. CRANKCASE BREATHER KIT
B. TORQUE CONES
Here’s an inexpensive way to get back
some of that lost horsepower & gas
mileage without affecting the sound.
included in Hypercharger Kits for Twin Cam
models. installs between air cleaner & carb
support bracket. Reuses stock breather bolts
& vent hoses.
9920 Crankcase Breather Kit for
’99-’13 Twin Cam (except
’08-’13 Touring, Trikes, ‘11-’12
FLSTSE, ‘13 FXSBSE)
9155 Fits: most 1-3/4” O.D. Twin
note: can be USed on ‘86 to ‘06 xl
& ‘93 to ‘99 evo with the PUrchaSe
of the 9927 breather boltS.
Cam, Evolution Big Twin &
XL exhaust systems (pr)
9928 ’07-’13 XL
C. REPLACEMENT COMPONENTS
for crankcase breather kit for evo
9900 Repl. Rubber Boots (pr)
8999 Repl. Boots & Hoses (set)
2000 Repl. 1” Breather Bolts (pr)
2002 Repl. 1-3/4” Breather Bolts
(pr)
232
WWW.ZODiaC.NL
F. BREATHER COMPONENTS
J
8599 Butterfly Shaft
E
D
D. AIR CLEANER SPACERS
models w/CV Carb
8581 Diaphragm Only
I
9917 Fits: ’93-’99 Evolution Big
Twin models w/CV Carb
i
K 9905 Butterfly Screw Set
(4 pcs)
C
B
Late inlet
H 8580 Vacuum Pod
Rebuild Kit
9913 Butterfly Shaft
Caps w/Screws,
Washers, Bearings,
Shim & Spring
E
Early inlet
J
G. CARB INLET GASKETS
9902 Late inlet: 40mm Keihin
CV, 44mm Keihin CV,
Delphi EFi (except ’08-’11
Touring & Trikes)
9901 Early inlet: 38mm Keihin
Butterfly, Bendix, Zenith,
Tillotson
H. K&N FILTER CARE KIT
your bike will run better & your engine
will last longer. all our air cleaners use
K&N filters. With proper maintenance,
these filters will last many years.
85
K&N Filter Care Kit
I. THE TURBULATOR
install in the intake manifold to help
keep the fuel droplets in suspension &
assure a complete mix of gas & air.
8761 Turbulator for 2 Bolt -
for twin cam
9975 Stock Length (3/8”-16 x 1-1/4”)
Twin Cam Breather Bolt (pr)
1-7/8” & 48mm manifolds
(S&S B, Shorty E)
9976 1/2” longer (3/8”-16 x 1-3/4”)
J. REMOTE CRANKCASE
9927 1/2”-13 x 1” T.C. Style Breather
Universal fitment
Twin Cam Breather Bolt (pr)
Bolts for XL (pr)
9977 Formed Breather Hoses (pr)
[email protected]
BREATHER FILTER
8515 Remote Crankcase
Breather Filter
MULTI-FIT
Performance
EFI PRODUCTS
TTS MASTERTUNE
The most powerful tuning tool available now compatible with ‘11-’13
Softail & ‘12-’13 Dyna! This one tool contains three powerful programs
including masterTune tuning software, Data master data acquisition
& VTune (a self tuning software solution). masterTune has over 20
tables & parameters to optimize your ECm including air-fuel mixture &
timing. (Some early year bikes may have fewer tables)
FEaTURES
CaN Bus Systems on ’11-’13 Softails & ‘12-’13 Dynas)
maSTERTUNE 2
9225 masterTune Single Bike Kit - Compatible with
CHECK OUT OUR ONLiNE ViDEO TO
SEE HOW EaSy THiS iS TO iNSTaLL!
CaN Bus Systems (ea)
9226 masterTune Dual Bike Kit - Compatible with
CaN Bus Systems (ea)
9227 masterTune USB Cable Kit (ea)
Fits: ‘11-’13 Softail & ‘12-’13 Dyna with CaN
Bus systems (6-pin)
9228 masterTune USB Cable Kit (ea)
Fits: all Delphi (except ‘11-’13 Softail & ‘12-’13
Dyna) (4-pin)
COmPONENTS
9223 masterTune USB Cable (ea)
MULTI-FIT
For Original P/N 9220 TTS (Black interface)
FUELPAK
FEaTURES
by vance & h ineS
235
Fits: all ’01-’06 Softail & ’07-’11 Softail with smaller than 200mm Tire (V&H #61001a)
232
Fits: all ’11-’13 Electra Glides, Road Glides, Street Glides, Trikes & Road Kings (V&H 61019)
238
Fits: all ’07-’09 Sportster & ’07-’11 Softail with 200mm Tire (V&H 61007a)
236
Fits: all ’02-’07 Electra Glides, Road Glides, Street Glides, & Road Kings (V&H #61003a)
252
Fits: all ’08-’10 Electra Glides, Road Glides, Street Glides, & Road Kings (V&H 61009)
237
Fits: all ’04-’11 Dyna, ’02-’11 V-Rod, & ’09-’11 XR1200 (V&H #61005a)
note: reqUireS the USe of a high - Performance air filter.
MULTI-FIT > PERFORMANCE > AIR CLEANER COMPONENTS & EFI PRODUCTS
233
WILD THINGS® 57MM THROTTLE BODIES
Let your engine really breathe! Stock throttle bodies
467
restrict airflow, robbing power, especially from modified
engines with large displacement &/or high-flow heads. With
our 57mm throttle bodies, you can increase horsepower big-time in Delphi fuel
injected Harleys. a larger plenum area, longer short side radius for greater &
smoother flow, & relocated nozzles for better fuel distribution are just a few of
the improvements. Virtually all stock components are reused & will bolt onto the
throttle body without any modification. Our throttle body is designed with the
stock Delphi air cleaner bolt pattern so it will accept any H-D or Küryakyn air
cleaner. it even allows you to retain your factory cruise!
469
FiTS: ’06-’13 TWiN Cam mODELS (EXCEPT ’08-’13
TOURiNG/TRiKES, ’11-’12 FLSTSE, ‘13 FXSBSE) WiTH
DELPHi FUEL iNJECTiON
note: wild thingS intaKe flangeS are reqUired & mUSt be
PUrchaSed SeParately.
469
Wild Things Throttle Body (ea)
457
Wild Things intake Flanges (pr)
Fits: ’06-’13 Twin Cams with Wild
Things Heads or ’05-earlier style
Screamin’ Eagle Heads
467
Wild Things intake Flanges (pr)
Fits: ’06-’13 Twin Cams with
Stock or Screamin’ Eagle Heads
imPortant: aS with any Performance ProdUct, tUning iS
eSSential to achieve maximUm gainS in horSePower & torqUe.
StocK or aftermarKet ecU re-maPPing iS reqUired!
FiTS: ’01-’05 TWiN Cam mODELS WiTH DELPHi FUEL iNJECTiON
note: Softail modelS reqUire fUel SUPPly tUbe (P/n 441). toUring modelS reqUire SPacer
Kit (P/n 442).
440
Wild Things Throttle Body & manifold (ea)
439
Wild Things Throttle Body & manifold for 1.800” intake Ports (ea)
455
Wild Things Throttle Body with Wide manifold (ea)
456
Wild Things Throttle Body with Wide manifold for 1.800” intake
Ports (ea)
441
Steel Fuel Supply Tube for Softail (ea)
442
Spacer Kit for Touring models (ea)
note: Some larger than StocK engineS USe taller cylinderS than StocK. P/n’S 455 & 456 are
deSigned for theSe aPPlicationS that reqUire a wider intaKe manifold. the deSign allowS for
trimming to length for yoUr ParticUlar aPPlication.
HiGHEST TORqUE & HORSEPOWER THROTTLE BODy ON THE maRKET - PERiOD!
miKE
ROLaND
234
WWW.ZODiaC.NL
[email protected]
95”
domed piston or
103”
dish
dome piston applications
The most technologically advanced heads on
the market. mike Roland’s designs carefully balance
the production of awesome horsepower & torque with the
important qualities of a good street motor - Starts as easy as a
stock bike, runs on pump gas without any detonation, runs cooler
than stock, & is as tractable as a stock bike.
432
grade aluminum alloy
designed for piston use .
break-in time, quieter running & a stronger
resistance to scoring.
larger valves & cams without extra machine
work. The decks are slightly raised for ease
of setting a tight squish.
high-compression piston for stock heads
results in less pumping losses (robbed power)
& better combustion efficiency & detonation
control (pinging).
Wild Things Billet Street Heads, Polished - For
Wild Things Domed or Dish Dome Pistons (set)
keepers & rings.
mORE FEaTURES FOUND ONLiNE
DOmED PiSTONS FOR STOCK H-D HEaDS
325
445
Forged 10.5:1 Domed Piston Kit
for 95” Twin Cam (3.875” bore)
448
for 95” Twin Cam (.010” over
3.875” bore)
483
480
COMETIC® EST TOP END GASKET SET
This EST (Extreme Sealing Technology) Top End Gasket Set uses
the best possible materials available for every gasket in the kit,
making these truly the best kits available. includes every gasket &
seal from the base gasket right up to the air cleaner.
DOmED PiSTONS FOR WiLD THiNGS® HiGH
COmPRESSiON HEaDS
444
for 95” Twin Cam (3.875” bore)
443
for 95” Twin Cam (.010” over
3.875” bore)
Fits: 95”& 103” Twin Cam Engines – includes .045” head gasket
480
EST Hi-Performance Top End Gasket Kit (set)
COMETIC® MLS HEAD GASKETS (m ulti - layer steel )
Gaskets are available in various thicknesses, so setting up your
quench area or “squish band” is no problem.
FOR 88” & 96” TWiN Cam
483
484
mLS Head Gasket - .030”
485
486
487
AUTOLITE™ EXTREME SPORT SPARK PLUGS
325
aXS4164DP (pr)
Fits: all ’99-’13 Twin Cam, all ’86-’13 Sportsters,
’88-’00 GL1500, ’96-’03 Valkyrie, ’84-’87 GL1200
MULTI-FIT
FLaT TOP PiSTONS
458
Forged Flat Top Piston Kit for
103” Twin Cam including ’07-to’11, 96”–to–103” conversions
(3.875” bore)
449
Top Piston Kit for 103” Twin
Cam including ’07-to-’11, 96”–
to–103” conversions (.010” over
3.875” bore)
mLS Head Gasket - 030” (pr)
FOR 95” & 103” TWiN Cam (SOLD iN PaiRS)
MULTI-FIT
WILD THINGS® BILLET HEADS for twin
cam for
WILD THINGS®
PISTONS
DiSH DOmE PiSTONS
475
Forged Dish Dome Piston for
103” Twin Cam with Wild Things
Heads (P/Ns 428, 431, 432),
3.875 bore
459
Forged Dish Dome Piston for
103” Twin Cam with Wild Things
Heads (P/Ns 428, 431, 432),
.010” over 3.875 bore
MULTI-FIT > PERFORMANCE > AIR CLEANER COMPONENTS & EFI PRODUCTS
235
Performance
ENGINE COMPONENTS
WILD THINGS® CAMS
most cams trade low-end power & torque for upper horsepower or top-end performance for low-end torque. Küryakyn’s Wild Things
Cams are finessed to give wide usable power-bands with strong low end, big torque, high horsepower & extended RPm ranges.
Low noise & long valve train life are also features built into our Cams. No other cams on the market can replicate the results of Wild
Things Cams, period!
CAM SPECIFICATIONS for twin cam
LiFT
LiFT @ TDC
OPENiNG
CLOSiNG
DURaTiON
LOBE
CENTER
(inches)
(inches)
(degrees)
(degrees)
(degrees)
(degrees)
GRiND
BOLT IN FOR ‘99-’06
TC-1/1G/1U
INTAKE
EXHAUST
.510
.498
.158
.121
15
40
41
08
236
228
103
106
.510
.495
.169
.145
18
48
50
14
248
242
106
107
.575
.547
.190
.150
20
46
42
14
242
240
101
106
.575
.495
.175
.145
18
48
50
14
248
242
106
107
.560
.550
.217
.181
26
52
54
20
260
252
104
106
.625
.575
.230
.182
26
52
54
20
260
252
104
106
.590
.560
.225
.189
27
58
59
22
266
260
106
108
.630
.575
.234
.182
27
52
59
20
266
252
106
106
TC-2/2G/2D/2U
INTAKE
EXHAUST
TC-24D
INTAKE
EXHAUST
CUSTOM BUILDS ‘99-’13
TC-26G/26D/26U
INTAKE
EXHAUST
TC-4G/4D/4U
INTAKE
EXHAUST
TC-46G/46D
INTAKE
EXHAUST
TC-5G
INTAKE
EXHAUST
TC-546G/546D
INTAKE
EXHAUST
OFFERED iN FOUR DRiVE
CONFiGURaTiONS:
suffix (example: TC-1) are chain drive
style cams for ’99-’06 Twin Cams &
use stock splined gear & chain (’99
models with keyed drive gear will
have to install a splined gear)
(example: TC-2G) are gear drive
Cams & require an S&S gear drive &
installation kit (sold separately)
(example: TC-2D) are chain drive
style Cams for ’06 Dyna & all ’07-’13
Twin Cams & use stock cam chain drives
(example: TC-2U) are designed
to upgrade ’99-’06 Twin Cam
engines to use the ’06 Dyna/’07-’13
chain drive & oil pump
timing & more long-term power
& reliability by eliminating the drive
chain stretch & the possibility of
tensioner failure on ’99-’06 models
imPortant: oUr tc-4, tc-46, tc-5 & tc-546 camS
are SPecially deSigned to allow yoU to USe the StocK
Starter in larger than StocK engineS & helP eliminate
detonation (Pinging) UP to 10.5:1 comPreSSion while
USing 92- octane PremiUm fUel. believe US when we Say
thiS iS critical. it iS alSo very rare for anyone elSe to
offer yoU thiS combination.
S&S GEAR DRIVE KIT
improve performance over the stock chain drives by
accurately controlling valve timing & reducing frictional
losses. Requires andrews Gear Drive installation Kit.
419
S&S Gear Drive Kit (ea)
note: inStallation K it (P/n 418) reqUired.
ANDREWS GEAR DRIVE INSTALLATION KIT
Designed for S&S Gear Drives, includes upgraded
bearings to replace stock bearings, a new snap ring, &
a gasket for the cam cover. Required for all Wild Things
gear-drive Cams used with S&S Gear Drive Kits.
418
236
andrews Gear Drive installation Kit (ea)
WWW.ZODiaC.NL
[email protected]
COMETIC® CAM SERVICE GASKET SET
Provides all the gaskets & seals needed when changing a cam (cam
cover, push-rod tubes, rocker boxes, etc.)
Fits: ’99-’13 Twin Cam engines
481
Cam Chest Gasket Set (set)
Big power available in 95 inch & up motors. increased
compression & head work, large carb or throttle body
& pipes will really make this Cam shine. Well over 110
horsepower is possible, even mid to high teens from a
modified 95 inch.
421
Wild Things TC-4G Cams (set)
473
Wild Things TC-4U Cams (set)
462
Wild Things TC-4D Cams (set)
note: valve SPringS & SPacing reqUired.
TC-46G (’99-’06 [EXCEPT ’06 DyNa])
TC-46D (’06 DyNa & aLL ’07-’13)
High lift version of the TC-4G. 95 inch & up motors
can make some impressive power over a wide
power band. 120+ horsepower possible in a 95
inch. increased compression & head work, large
carb/throttle body & performance pipes necessary
if you want to make full use of this Cam.
424
463
note: Some clearancing, valve SPringS & SPacing reqUired.
TC-5G (’99-’06 [EXCEPT ’06 DyNa])
High horsepower & torque cruiser cam for 103 inch
& larger engines. High compression, headwork, large
carburetor or throttle body, & performance pipes will
bring out the most with this Cam.
426
note: valve SPringS & SPacing reqUired.
TC-546G (’99-’06 [EXCEPT ’06 DyNa])
TC-546D (’06 DyNa & aLL ’07-’13)
a Wild Things Cam for engines over 100 C.i. Huge
power available while still retaining good drivability &
a quiet running engine. Really helps in starting those
high compression large inch engines.
MULTI-FIT
TC-4G (’99-’06 [EXCEPT ’06 DyNa])
TC-4U (’99-’06 [EXCEPT ’06 DyNa])
TC-4D (’06 DyNa & aLL ’07-’13)
TC-24D CAM
TC-24D (‘06-DyNa & aLL ‘07-’13)
The bolt-in cam for late model Harley’s! The results are
staggering when combined with the award winning
Perfect Storm. Power delivery is strong & consistent
throughout the rev range, while idle & cruise are silky
smooth. See pg 222 & 236 for more details.
579
TC-1 & TC-1G (’99-’06 [EXCEPT ’06 DyNa])
TC-1U (’99-’06 [EXCEPT ’06 DyNa])
Bolt-in low-end & mid-range power with a little more
up top. 80+ horsepower possible with no head work
in an 88”. also works very well in 95 inch motors
up to 10:1 compression. Gear drives give you more
accurate timing & more long-term power & reliability
by eliminating the drive chain stretch & the possibility
of tensioner failure on ’99-’06 models.
420
Wild Things TC-1 Cams (set)
422
470
TC-2 & TC-2G (’99-’06 [EXCEPT ’06 DyNa])
TC-2U (’99-’06 [EXCEPT ’06 DyNa])
TC-2D (’06 DyNa & aLL ’07-’13)
Bolt-in performance Cam for 88 to 103 inch motors.
Gain more power over the whole RPm range. 90+
horsepower is possible in an 88 inch with no head
work, but really comes alive with more inches &
higher compression.
423
471
460
TC-26G (’99-’06 [EXCEPT ’06 DyNa])
TC-26U (’99-’06 [EXCEPT ’06 DyNa])
TC-26D (’06 DyNa & aLL ’07-’13)
High lift version of the TC2-G. Great all around power
potential from this cam. With the Wild Things Heads,
Pistons, & Throttle Body, we have made over 120 H.P. a
very street friendly Cam.
408
Wild Things TC-26G (set)
409
472
464
461
MULTI-FIT
MULTI-FIT > PERFORMANCE > ENGINE COMPONENTS
237
CONDOR® WHEEL CHOCKS
TiE-DOWNS FOR:
TOURiNG - PG 51
SOFTaiL - PG 94
Condor motorcycle support & transportation solutions provide a fully
adjustable wheel locking system capable of accommodating almost
any motorcycle. The patented locking mechanism effortlessly & securely
supports the motorcycle in an upright position. This makes tying down a
motorcycle a simple & easy task for one person. We are so impressed with
Condor Products, we use them in our company trailers for safe & secure
transport of our motorcycles.
920
The Shop
921
condor ® pit- stop / trailer stop wheel chock
922
condor ® sc 2000 trailer only wheel chock
accommodates front or rear wheel sizes from 14”-22”/80mm220mm wide
15”-22”/80mm-220mm wide
allows you to secure the bike with only 2 straps
or detaches to any transportation platform (trailer, pick-up bed, etc.)
quickly & easily attaches to trailers or pick-up beds
6” high)
920
Condor Pit-Stop/Trailer Stop Wheel
Chock (ea)
921
adapter Kit for Condor Pit-Stop (ea)
EZ CHOCK™
922
Condor SC2000 Trailer Only Wheel
Chock with adapter Kit (ea)
923
adapter Kit for SC2000 (ea)
U.S. Patent d547,712 & 7,044,309
With the EZ Chock, the hassle of drilling or
mounting any hardware for wheel chocks is a thing of the past!
1. SET iN PLaCE
With EZ Chock, you can use the same chock in the truck, trailer
or toy hauler without additional mounting hardware. it’s patented
plate & tab strapping design secures your bike in place without
the traditional mounting hardware that all other chocks require.
935
2. SET REaR STRaPS
3-1/2” for Cruisers with Narrow
Front Tires or Dirt Bikes (ea)
note: we SUggeSt P/n
mh/90 front tireS.
935 for motorcycleS with 80/90, 90/90, or
3. STRaP iN THE BiKE
AIR FORCE BLASTER from metro
AIR FORCE BLASTER SIDEKICK from metro
its 4 peak H.P. motor & 2-stage dual fan
provides a super high velocity, mildly
heated air column that cuts drying time
by approximately 75%. a variety of
interchangeable tips included.
a compact, powerful hand held motorcycle
dryer that’s small enough to put in a
saddlebag. at just over 3lbs the all steel
Sidekick’s 1.3 H.P. motor produces a large
volume of warm filtered air & is great at
home or on the road.
900
238
air Force Blaster (ea)
WWW.ZODiaC.NL
905
[email protected]
Blaster Sidekick (ea)
957
DOC BAILEY’S
LEATHER CLEAR
DOC BAILEY’S
LEATHER BLACK
Clear formula designed for all
color, exotic skins, & multi color
leathers. Spray & Wipe Clear
Formula cleans, conditions,
restores & waterproofs all
leather & vinyl. Excellent for
riding leathers, motorcycle seats
with stitching, leather furniture,
car interiors – all colors of
leather, vinyl, rubber & plastic!
available in a 4 oz detail
kit with sponge applicator &
buffing cloth.
mild detergents clean the leather,
lanolin oil conditions & restores the
skin, then the black dye pigment
restores the color! Natural waxes
seal the color in & waterproofs
your leather saddle bags, jackets,
& motorcycle seats. Try it on
anything black; running boards,
car interiors, plastic, & rubber side
walls - you’ll be impressed how
well it works. Contains no silicone
& will not bleed. available in 4 oz
detail kit with sponge applicator &
buffing cloth.
958
Doc Bailey’s
Leather Clear
Detail Kit (4oz Kit)
957
MULTI-FIT
958
35
WHITE DIAMOND®
METALS POLISH
Oxidization & discoloration is easily &
quickly removed from aluminum, stainless,
chrome, & brass while returning the
surface to a brilliant shine. also effective
on minor gold & blue discoloration on
chrome & stainless exhaust pipes. Besides
containing an ultra fine polishing rouge,
White Diamond contains a wax agent that
will keep surfaces gleaming far longer than
competing brands. New single use wipes
come packaged in a 24 count countertop
display box. One wipe will polish an entire
motorcycle. Great for road trips!
Doc Bailey’s
Leather Black Detail
Kit (4 oz Kit)
GLARE® ULTRA WASH
30
White Diamond Single-Use
Wipes (24 count with
display)
35
White Diamond metals
Polish, 12 oz (ea)
Biodegradable & safe for paints & finishes
including enamel & clear-coated paints.
943
954
Glare Ultra Wash (ea)
LOCTITE® THREAD
TREATMENT STICKS
SiLVER GRaDE aNTi-SEiZE STiCK
ºF
97
Silver Grade anti-Seize Stick (20 grams) (ea)
268 HiGH STRENGTH RED THREaDLOCKER STiCK
expansion & prevents rust & corrosion while sealing &
protecting threads
LIQUID HORSEPOWER
FUEL TREATMENT
956
LHP (Liquid Horsepower) is the most
advanced & effective gasoline additive for
use in both stock & high performance engines.
The performance, protection, & fuel mileage it delivers
will keep you coming back for more.
MULTI-FIT
FEaTURES
potency approved by EPa
ºF, fully cured in 24 hrs
96
268 High Strength Red
Threadlocker Stick (9 grams) (ea)
valves, valve guides, pistons, rings, & cylinders
248 mEDiUm STRENGTH BLUE THREaDLOCKER STiCK
expansion & prevents rust & corrosion while sealing &
protecting threads
ºF, fully cured in 24 hrs
95 248 medium Strength Blue
954
LHP 1oz Bottles (48 Count with 2 Displays)
955
LHP 1oz Bottle (Treats 5 gal) (ea)
956
LHP 6oz Bottle (Treats 30 gal) (ea)
Threadlocker Stick (9 grams) (ea)
MULTI-FIT > THE SHOP
239
The Shop
GENERAL ACCESSORIES
V-120 & V-120C HORNET® electronic deer avoidance system
The Hornet has proven to be the only device to effectively deter deer
accidents. There are tens of thousands of Hornets in daily use with millions
of proven miles. Regardless of speed, it produces a sound pressure of 120
db, & under most circumstances is very resistant to contamination. Regular
inspection & cleaning is recommended.
Proper placement is essential for maximum performance. The Hornet
includes various universal mounting brackets, basic hardware & a switch.
a separate motorcycle wiring kit is available & includes a harness & switch
specifically designed for use on a motorcycle; while not required, it will
make the installation much neater. Our P-Clamps work great on many
motorcycles to assist in mounting to frames or engine guards.
SHOWN WiTH
P-CLamP - PG 144
DEER aRE
RESPONSiBLE FOR
mORE DEaTH &
iNJURy THaN aNy
OTHER aNimaL iN
THE U.S.a.
Universal fit on 12-volt motorcycles
4042 V-120 Hornet Deer alert, Black (ea)
4043 V-120C Hornet Deer alert, Chrome (ea)
4044 motorcycle Wiring Kit for V-120/V-120C
#1 ENDORSED
DEER aLERT iN
amERiCa
GRANDEUR CYCLE “THE MISSING LINK” ENGINE STABILIZER
The missing Link is designed to eliminate uncomfortable & dangerous riding conditions
known as tank slap, rear steer or high speed wobble on rubber mounted Touring
models. it works just like the top & front stabilizer links to keep the engine centered in
the frame by preventing the rear rubber mounts from compressing & moving.
FEaTURES
Wobbles Lately?
Fits: all ’02-’08 Electra Glides, Road Kings, Road Glides, & Street Glides
396
760
The missing Link Engine Stabilizer (ea)
751
GUARDIAN® BELLS
761
755
753
759
757
750
758
756
754
752
770
240
WWW.ZODiaC.NL
750
Eagle (ea)
751
Celtic (ea)
752
Holy Cross (ea)
753
P.O.W. (ea)
754
Lady Rider (ea)
755
Skull (ea)
756
Halo (ea)
757
Old Glory (ea)
758
Never Ride Faster (ea)
759
Flame (ea)
760
Grenade (ea)
761
Ride it Like you Stole
it (ea)
770
Bell Hanger (ea)
Fits: Holds Bell &
attaches to any
screw or bolt on bike
[email protected]
PRIMOSHIELD™ full & half covers
Lightweight, compact & water-resistant bike covers
offered in full or half sizes. a soft fabric liner protects
your windshield & fairing from abrasion. The bottom
panels are heat/scorch resistant & includes an elastic
hem coupled with reinforced grommets & shock cords
to ensure a great fit.
4120
Full Cover, Black (ea)
4122
Full Cover, Silver (ea)
4121
Half Cover, Black (ea)
4123
Half Cover, Silver (ea)
4120
4123
MULTI-FIT
CTEK mULTi US 7002
mode model for all types of leadacid batteries (wet, sealed, aGm)
increases battery life
CTEK US 0.8
CTEK mULTi US 4.3
8 Step, fully automatic switch
mode model
mode model
& is an excellent maintenance
charger for seasonal vehicles with
batteries up to 100 ah.
Pulse recover of sulfated batteries
operate equipment at 13.6 V up to 7a
4258 CTEK mULTi
US 7002 (ea)
Reconditioning function that
restores stratified and deeply
discharged batteries.
charge batteries from 1.2-32ah.
Charges 1.2-110ah batteries and can
maintain batteries up to 160ah in size.
charge maintenance, will not
over-charge
Charges at 0.8a or 4.3a max.
personal watercraft, snowmobiles.
4204
ideal Uses: motorcycles, aTVs, personal
watercraft, snowmobiles, automobiles
5 year manufacturer’s warranty.
6005 CTEK mULTi US 4.3 (ea)
6004 CTEK US 0.8 (ea)
4238
Will diagnose and indicate if battery
can receive and maintain a charge.
COMFORT INDICATOR QUICK CONNECTS
4268
need to be charged
to avoid stratification
be able to start the vehicle
for ctek battery chargers
4204 Fits: White or White & Black
quick Connector (ea)
4238 Fits: Orange & Black quick
Connector (ea)
Fits: CTEK chargers with orange & black quick connector
4268 Comfort indicator - Eyelet (ea)
4269 Comfort indicator - Pigtail (ea)
6023
HAWG BUDDY
7- in -1
fold up set
This compact fold up set has all the tools you need
for keeping your motorcycle tight! Features a strong
handle & the 7 tools for the most used fasteners on
your H-D.
6024 Hawg Buddy 7-in-1 Fold Up Set (ea)
MULTI-FIT
4269
EXTRA QUICK CONNECT CORD SETS
HEX TOOLS
6016
from bondhus
Standard & Torx hex tools should be
part of every rider’s basic tool kit.
6016
Standard - 13pc Black Ball End,
.050”-3/8” (set)
6018
5pc Fold-Up 3/16-3/8 Hex (set)
6019
9pc Fold-Up .050-3/16 Hex (set)
6023
Hex - 8pc Fold-Up, T9-T40 Torx (set)
MULTI-FIT > THE SHOP > GENERAL ACCESSORIES
241
CHROME UNIVERSAL
HELMET LOCK
LOCK REMINDER CORD
Don’t let anyone walk off with your
helmet! Lock it right to your bike. Works
on engine guards, frame tubes, or any
other 7/8” to 1-1/2” tubes.
Never ride off with your disc lock in place
again. These compact, yellow cords stretch
from the disc lock to the handlebar to
serve as a reminder to remove the lock.
4236
4236 9 ft. (ea)
4232 For 1-1/4” to
1-1/2” Tube (ea)
4220 For 7/8” to
ROUNDIT® WIRE WRAP
1-1/4” Tube (ea)
note: inStallS with Standard toolS. worKS beSt
on a 2-1/4” long Section of Straight tUbe.
4220
Though tubular in shape, it’s actually a flat piece of
material with a memory. a wire can actually be added
or joined to an existing harness with no cutting or fishing
necessary. Sold in 6 foot lengths.
LICENSE PLATE HELMET LOCK
1987 1/4” - Black (ea)
with mount
1991 3/8” - Black (ea)
Lock your helmet to your
motorcycle. The mounting plate
easily bolts to the back of almost
any motorcycle & allows easy
access for locking your helmet.
4248
1995 1/2” - Black (ea)
KICKSTANDS
& COMPONENTS
4248 License Plate
Helmet Lock (ea)
7110
Chrome Kickstand Spring (ea)
Fits: ’85-’06 Softails, all ’91-’06 Dressers
& Road Kings, ’91-’94 FXR, & all ’91-’06
Sportsters
7113
Kickstand (ea)
Fits: all ’83-’06 Dressers & Road Kings
CLIX L.E.D. PODS
Click On - Click Off! Lights
run on 3 aaa batteries (included)
& run up to 100 hours.
1626
7110
note: reqUireS motorcycle to be eqUiPPed with
KicKStand bUmPer.
1626 Clix L.E.D. Pods (ea)
7112
115032
FRONT
BaCK
8985
KÜRYAKYN® T-SHIRTS
EMBOSSED KÜRYAKYN® METAL SIGN
805
L-Short Sleeve, Sand (ea)
806
XL-Short Sleeve, Sand (ea)
809
L-Long Sleeve, Black (ea)
810
XL-Long Sleeve, Black (ea)
811
1469
XXL-Long Sleeve, Black (ea)
115032
Embossed metal Sign (ea)
KÜRYAKYN® STAINLESS STEEL TRAVEL MUG
1469 Küryakyn Stainless Steel Travel mug (ea)
note: rePlacement for drinK holderS that originally have a travel mUg.
REPLACEMENT BASKET for kuryakyn drink holders
KÜRYAKYN® CAN COOLER
Fits: P/N’s 1422, 1475, 1462, 1482, 1689, 1484
8985 Can Cooler (pr)
1429 Replacement Drink Holder
mesh Basket (ea)
242
WWW.ZODiaC.NL
[email protected]

multi-fit - BigTwin Motorcycles Group

Transcription

Similar documents

online catalog

engine - Custom Chrome Europe

Mikuni Cruise Control

Risky Business

KlipHanger BARS FOR 08

Featuring Troy Cassar-Daley Adam Harvey

Brochure - Custom Chrome Europe

LED ring light pages 66-68 - light systems

NBC 106 Yachtfisher.indd