Eod Catalog 2014

Disrupters in over 65 Countries Across the World
I.E.D.
Bomb
Disposal
Equipment
•
•
•
•
•
•
•
Disrupter Water Cannons
Standard and Electric Ammunition
Blasting Cap Containment
Carry Cases
• Training
Back Packs
• Laser Sights
EOD Equipment
• Stands
R & D Availability
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
DISRUPTER CANNONS
RADC-9 RADC-12
RADC-18 & RADC-24
Honed to a mirror finish for improved Accuracy /
Velocity and ease of cleaning. Accepts high
power loads and all commercial 12 Gauge. 24”
Barrel has a unique tapper length that reduces
overall weight and allow robots arms to articulate
easily by removing the weight in front. The rear
acts as a counter balance providing smooth operation for robots.
•Body length = 9.00” 12.00” 18.00" or 24”
•O.A.L. = +.75” Breach Bolt
•Weight = all under 8.25 Lbs
•Machined from 17-4 Stainless
•1.500" Diameter for strength
•1.500" Diameter taper to 1.25” for Robot use on 24”
•Precision gun drilled to .730”
•Honed to a mirror finish
•3-1/2" 12 Gauge Chamber
•Acme Threads - Quick solid lock up
•2-1/2" Welded Body ring
•6-1/4" Knurled back end
•External Laser location hole
•Chamfered exterior crown
•Reduced Breech bolt length
•6 & 7 Breach Bolt inserts for Electric and Time Fuse
RADC-9 Basic Includes RADC-BS, Stop
Plate, cleaning equipment and case w/ 6 and 7
Breach Bolt Inserts
RADC-9 Kit
Kit includes:
•
•
•
•
•
•
•
•
Disrupter Cannon, Breech Bolt inserts (6 & 7)
HB-10 Electric Igniter
RDI Shock Tube Igniter
4 Dz. Water Plug Sets
12 Rounds PBB-70
5 Rounds each PBA, PCA and SLUG
Stop plate w/ Bag Stand
Pelican 1450 custom case
Electric Ammunition at slightly higher price
LC-1 Kit
Royal Arms 18” Cannon Basic set in a box.
Includes:
• RADC 18 (Disrupter Cannon)
• Breech Bolt with inserts for Time Fuse & Electric
Shots
• WP (water plug)
• LC#1 (NEW Custom Case with foam)
• PR (pushrod for cleaning)
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
DISRUPTER CANNONS & KITS
RADC-18 KIT Cannon & Accessories
Our Kit includes:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Disrupter Cannon with Breech Bolt inserts (6 & 7)
SL-500 Green Laser
Pushrod w/cleaning Mop
Dead Hammer
Disrupter Pole Stand and Cannon Holder with slide
HB-10 Electric Igniter
Electric Cable Reel
RDI Shock Tube igniter
4 Dz. Water Plug Sets
20 Rounds PBB-12E
15 Rounds each PBA-12E & PCA-12E
5 Rounds Slug-12E
10 Rounds PCA
12 Rounds PBB-7
iM2950 Custom Storm Case
RADC-24 KIT Cannon & Accessories
No Laser or Laser Holder included in Standard Kit. In-Line
Laser and Muzzle Break available as additional equipment
Ammunition not included in Kit
RADC-27mm
Cannon & Accessories
Information on inside back page and at
Royalarms.com
DD- Disposable Disrupter
Single use Disrupter perfect for long range trips No need to carry bulky or
heavy equipment, just a few different loads and an igniter or 9V battery in a
pinch. Can be used with an optional stop ring for placement in Robots or holders. Inexpensive alternative to dearmers.
• DD-PCA
Clayvon (clay/steel Mixture)
• DD-PBA
Copper Compressed
• DD-Slug
Hollow point (Solid steel )
• DD-PBB
Blank (Air or Water Shot)
• DD-FB
Flash BANG (Air ONLY!)
• DD-CSL
Customer Specified Load
DDRC- Recoilless Disposable Disrupter Same
specs as previous but RECOILLESS with adapter tube
• DDRC-PCA Clayvon (clay/steel Mixture)
• DDRC-PBA Copper Compressed
• DDRC-Slug Hollow point (Solid steel )
• DDRC-PBB Blank (Air or Water Shot)
• DDRC-FB Flash BANG (Air ONLY!)
• DDRC-CSL Customer Specified Load
• RDD-T Recoilless Launch Tube Required for Recoileless Use
Multi-use unit NOT disposable
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
DISRUPTER STANDS
DUCKFOOT #DF3DD
This Revolutionary device can be used for IED EOD Bomb Disposal
as well as Breaching, Multi-mount for ROBOT usage Depending on
the Robot mount, this may be attached vertically or horizontally to
allow for multiple shots from one deployment. Precision machined
6061 Aluminum
PS Disrupter Pole Stand
Fully adjustable base can be sand bagged to prevent blow over.
Adjustable Up, Down, Left, Right, Angle up Angle down. Head
interchangeable with all Royal Arms Disrupters. Total Weight 15.5
Lbs Height up to 9’
Smaller version w/18” poles fits in Travel Back Pack
Base T-section 1018 Steel Legs 6061 Aluminum
Head 6061 Aluminum
Poles Aluminum w/pvc cover
Bottom Pole Steel w/PVC cover
RADC-BS
The 5” square Bag Stand is designed for use with all Cannons. The
included 1/4” Aluminum stop plate protects the bag from damage
and the variously angled corners facilitate unlimited shooting angles.
Top strap for carrying. Weight when filled 8 to 12 lbs. Depending
on fill. Total weigh of Cannon, Stop Plate and Bag Stand for the 18”
cannon is approximately 18 -1/2 Lbs.
TBP Travel Back Pack
Back pack Intended for use where space is critical in air transport,
repelling and remote operations. Unit carries cannons, igniters,
ammunition, water, bag stand, shock tube and ground-wire reels.
Separate Velcro® closures and pockets, retain individual items
securely and readily accessible for quick response. Side pocket carries Pole Stand with 18” legs Specify which cannon when ordering ,
DD- Disposable Disrupters, Recoilless units, RADC-9, RADC-18,
RADC-24, RADC-27 or PAN.
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
IGNITERS
ROYAL DUAL IGNITER
Royal Arms dual shock tube igniter is the smallest most reliable mechanical igniter on the
market today. It has been tested and proved in Iraq Afghanistan and other Hostile environments. When your shot is on the line trust our RDI every time.
Weight: 0.75 lbs.
Overall Length: 6”
w/ brass heads & connectors
Overall Height: 1.325”
w/ Trigger button
Body Length: 4.950”
Body Height: 0.635”
Body Width: 1.5”
RDI Body Material: 6061 T6 Black anodized Aluminum
Firing Pins, Stops, Trigger, Primary Safety, Springs, Bolts & Cross Bar Material:
made of Stainless and Steel- Zinc Coated for rust protection.
Receiver Heads:
Dual Safeties:
Knurled Brass
1.580” X 0.5”
Connectors: Quick Connects
Primary Safety: Trigger Sear Block Rotate forward to engage Safety showing green S When rotated 180º backwards, shows a Red F for fire.
Secondary Safety: Quick release pins which blocks firing pins
RDI-QDB Quick detach block
Navy style with clamp head. Requires
additional clamp attachment to back of RDI for mounting.
Sold individually and as a unit.
STI Single Pen Shock Tube igniter
STI Body is made of Solid 6061 T-6 Aluminum that’s been milled out. Stainless Steel
Internal parts, and a brass head with quick connect. Dual Safeties, one internal and one on
the body. Length 6-1/2” Dia. 1/2” Wt. 3 Oz.
BBI-8K
Shock tube Breach Bolt Kit
Breach bolt for use with all Royal Arms Cannons. Kit contains the SS Breach
Bolt w/magnetic inserts to hold SS ball (firing pin) 25 SS balls, the cleanout
extractor pin and 5 Push-fit connectors. Installation of this unit in a cannon
constitutes creation of a fire arm and is required to be registered with ATF.
Purchase of this item will be on separate PO and billed on separate Invoice.
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
CONNECTORS
BHQ (Lower Base Half)
Replacement Brass Head for Any Shock tube igniter with 7/16-20 threads
(Mark 54, Mark 55, Omni, DX10 RDI, STI)
• Slotted back for easy extraction
• Lower half base unit that accepts the primer
BH-OSC (Upper Half)
(1 needed per unit)
Compression Fit holds in Shock Tube from .080 - .150 Dia.
STC-B Upper Half Push-fit
1/8” Instant fit for use with standard Commercial Shock tube Blue top
STC-B2 Upper Half Push-fit
5/32 Instant fit for use with Military Grade Nonel Shock tube Black top
STC-B4 Upper Half Push-fit
1/4 Instant fit for use with Time Fuse
FROM LEFT TO RIGHT
BHQ w/ STC-B
BHQ w/ STC-B2
BHQ
BH-OSC
BHQ w/ BH-OSC
STC-Y Connectors
Steel Instant fit Shock tube connector
1 line in - 2 lines out
STC-Y2 Nylon Instant fit Shock tube connector Y fitting
1 line in - 2 lines out
STC-Y3 Brass Nickel Plate Instant fit Shock tube connector Y
fitting 1 line in - 2 lines out
STC-I Inline Connectors
Steel Instant fit Inline Shock tube
coupler
STC-I2
Nylon Instant fit Inline Shock tube coupler
We suggest you change your BH (Brass Heads) to our new style units with more options available for connections.
Parts used on our earlier Canons, are available in limited quantities.
WP Water Plug Sets Can also be used to keep dirt and debris out of
cannon while not in use. Black plug seals chamber. Red plug seals muzzle
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
Complete line of 12 Gauge Disrupter Ammunition
STANDARD PRIMED
AMMUNITION
ELECTRIC PRIMED
PBB-3, 5, 7 & UVE Standard Prime Blank
PBB-3E 5E, 12E & UVE Electric Blanks
Standard primed and Electric low and hign powered blanks for use with
Water/ SNOT or air Shots
Velocity:
see ammo spec sheet
Distance:
1”- 6” or to 3 Feet with SNOT
Angle:
Various
Target:
PVC Pipe, Brief/Suite Cases, Ammo Cans
PBA Copper Frangible Standard and PBA-12E Electric
420 Grain Frangible Copper projectile for pipe bomb and Grenades
Velocity:
2,390 Ft p/sec -18” Barrel
Distance:
6”- 30 Feet
Angle:
7º-11º or 90º
Target:
Grenades (cast only), Pipe to 2 1/2”
PCA Standard and PCA-12E Electric Clay S/70 Steel
365 Grain Clay S/70 Steel mix for All Pipe bombs and galvanized
IED’s
Velocity:
2,450 Ft p/sec -18” Barrel
Distance:
6”- 60 Feet
Angle:
7º-11º or 90º
Target:
Ammo cans, and pipes to 2.5”
SLUG Standard & SLUG-12E Electric Hollow Point
541 Grain Hollow Point 4130 Steel hardened to 58-62 Rockwell
Velocity:
2,260 Ft p/sec -18” Barrel Standard
Velocity:
2,190 Ft p/sec -18” Barrel Electric
Distance:
6”- 30 Feet
Angle:
Various
Target:
Grenades, Copper IED’s, 3/8 Steel plate, galvanized
pipe, 90º pipe and internal thread pipe bombs
CPA Penetrator Point CPA-12E Penetrator Point
625 Gr. Penetrator Point 4130 Steel hardened to 58-62 Rockwell for
Velocity:
2,370 Ft p/sec -18” Barrel Standard
Velocity:
2,340 Ft p/sec -18” Barrel Electric
Distance:
6”- 30 Feet
Angle:
90º or 0º only
Target:
CO2 Bottles, 3/8 Steel plate, Heavy Duty galvanized
pipe, reinforced IED
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
ELECTRICAL
EBM-15 Electric Blasting Machine w/ Built in Continuity
Royal Arms Contracted with EIT corp to have the ultimate in reliable
and safe blasting machines for use in Blasting or EOD IED demolitions.
• 150VDC 1.25 Joules 50 Ohm 9V Battery
• Wareproof - Impact Resistant • Pushbutton Switch Protectors
• Quick Connect Binding Posts • 2 Second Charge Fire
• Compact 3 ” w x 1.5”d x 4”h design
• Built in Redundant Safeties • Separate circuit for Continuity & Fire
EIT-CT Pull String Continuity tester for firing circuits and explosive devices.
• LED “On” indicates a good circuit
•
•
•
•
•
•
EXTRA bright Readable in direct sunlight.
Lightweight waterproof polymer housing
Output of less than 5 milli-amps.
All Mil-Spec components.
900% safety factor
Pull String belt clip
DSL Demolition Safety Light Electrical continuity tester.
•
•
•
•
•
•
•
•
Reads 10+Mil-Spec blasting caps over 3000 feet of 22 Ga wire.
Over 120 hours of continuous duty or 90,000 five-second circuit tests.
LED “On” indicates a good circuit - readable in direct sunlight.
Lightweight waterproof polymer housing designed for positive “feel”.
Output of less than 5 milli-amps.
Size 1-3/4” X 3/4” - Total weight 1-3/4 ounce
All Mil-Spec components. • 900% safety factor.
Seven year shelf life. - Guaranteed.
REEL
Electric Cable reel with Red and Black Coated connections for easy Hook
up. Anchor on body makes it easy to wind up and Has 310 feet of cable
so you have enough room to stand clear. Weighs just 5 lbs and is 12x9x4
T Reel-E Equipped with electric cable
5” Dia. w/ 200 feet of cable. Made of polyurethane. The primary handle
is cam mounted to spin Free and fold flat to the side. The secondary
handle is Removable. Individual blank reels, TRB are available with
and without handles. Change time for handles is less than 30 seconds.
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
Kit Accessories & Misc.
DH- Dead Hammer
For opening Breech Bolt when locked shut. Hit hammer on end of
bolt to knock loose
PR Push Rod
Three piece Cleaning/extraction rod and brush. Used to clean as well as extract shells. The Rear section seats the water plug
to the proper depth (shown at left). PR-1 (not Pictured) has an additional section for the RADC-2/D cannon & the RADC-24
SL-500 LASER
The SL-500 uses an ultra bright green laser which
is 50 to 100 times brighter than red lasers, and is
much easier to see in daylight. The SL-500 uses
one DL 123 Lithium Battery (included) that
provides a battery life of up to 10 hours
(continuous use). The SL-500 uses the latest laser
technology to provide superior boresighting
accuracy. Super-strong magnets in the arbor
securely centers the laser within the muzzle for consistent accuracy. A unique system of adapters and O-rings make for a
snug accurate fit.
TI-MB Titanium Muzzle Brake
Fits RADC-24 Cannons and all 1.125 barrels. Will work with Robot mounts
and not interfere. Significantly reduces recoil on robot arms, by up to 80%
and retards the muzzle blast allowing you to get even closer on water shots
or other slug shots
ESMK2 EOD / ICE Mirror
Replaceable Acrylic 10” x 10” Mirror Heat / Cold Shatter Resistant
Head rotates 210º Quick change for additional tools or longer pole.
Supplied with 4ft pole expandable to 8ft - Aluminum fittings standard thread for most extension poles
Folds flat for storage
Soft zippered case holds assembled unit with supplied pole and 2 additional mirrors units
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
EOD TOOLS
DC-6 Dual Blasting Cap Crimper
Key Features:
1. Dual Blasting Cap Crimper, Fuse Cutter & Explosive Punch
2. Symmetrical uniform Teeth
3. Balistic Nylon Case, Velcro Closure w/Belt Loop
4. Non-reflective Anodized Matte finish
Technical Specs:
• Length: 7.05 in. (179mm)
• Width: 1.750 in. (44.5mm)
• Thickness: 0.35 in. (8.9mm)
• Weight: 3 oz. (0.09 kg)
• Powder Punch Diameter: .25 in. (6.5mm )
• Powder Punch Length: 2.2 in. (56mm)
• Materials: 7075 Hi Strength Billet Aircraft Aluminum
• Mil Spec Type III Class II Hard Black Anodized Finish to RC 50
DC-5 Det Cord / Shock Tube Cutter
Key Features:
1. Dual Edge Razor Blade w/ guillotine action cutting
2. German Stainless Steel Razor Blade
3. Balistic Nylon Case, Velcro Closure w/Belt Loop
4. Non-reflective Anodized Matte finish
Technical Specs:
• Length: 6.85 in. (174mm)
• Width: 1.625 in. (41.25mm)
• Thickness: 0.35 in. (8.9mm)
• Weight: 3 oz. (0.09 kg)
• Materials: 7075 Hi Strength Billet Aircraft Aluminum
• Blade: 316 Surgical German Stainless
• Mil Spec Type III Class II Hard Black Anodized Finish to RC 50
FBG-MKII FlashBang Grenade / Trainer
•
•
•
•
•
•
•
Impact Accuated Instantanious
Double Safety Pull Pin /With or without Spoon
209 Primer training insert
Concussion / Sound Disorientation
12 Gauge Blank Ammunition
185db at 1-1/2 Atmosphere of preasure
Kit containes Body, Spoon, Pull Pin, Shell Extracter
Primer training insert, 100pcs - 209 Primers
Sample Deployment Rounds
FBC Ammunition Ammunition sold in 25 round box
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
27MM Cannon
RADC-27 27MM Disrupter Cannon
#RADC-27 Disrupter Cannons are machined from 17-4 Stainless Steel 37mm Diameter
for strength and durability. Precision gun drilled to 27mm then Honed to a mirror finish for improved
Accuracy & Velocity. Chamfered exterior crown for smooth transfer. 6-1/4" Knurled back end for a better grip. Melonite finish for strength, anti glare and smooth finish. Electric Breach Bolt
DISRUPTER CANNON:
BREECH BOLT:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Body length = 18.000" / 457mm
O.A.L.
= 19.500" / 495mm
Body O.D.
= 1.500” / 38mm
Bore Dia
= 1.062” / 27mm
Weight = 6.5 Lbs / 2.95 Kg
Machined from 17-4 Stainless
Precision gun drilled to 1.062” / 27mm
Honed to a mirror finish
Acme Threads - Quick solid lock up
Knurled back end 6.250” / 159mm
Threaded Nose w/Cap to accept Recoil Reducer
Proper exterior crown chamfer
2-1/2" Welded Body ring Optional
Melonite coated
2 spring loaded Contact Connectors
Relived back end for easy connection
Fully chamfered edges
Delrin Encased firing pin
Machined from 17-4 Stainless
CARTRIDGE CAPACITY:
• Will Accept the following Cartridges
PT1066 L46A1 PS65MkII
• Variety of slugs & Frangible's Available
• Holds approximately 200mL of Water
• Interchangeable nose cones
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
MADE IN AMERICA
BY AMERICANS
ROYAL ARMS INTERNATIONAL, Inc, based in Oxnard, California manufactures the finest Bomb Disposal equipment
for Law Enforcement, Military & Government Agencies, worldwide, bar none. With great pride and a strong commitment to quality, Royal Arms offers a leading line of precision-engineered, durable and effective products. Our line is
manufactured using the highest Quality Alloys and state of the art manufacturing techniques. The result is a superior
product, with enhanced technical capabilities, which in turn offers law enforcement and military personnel the ultimate
tactical advantage in the field.
NOT ONLY ARE OUR PRODUCTS BACKED UP BY AN UNCONDITIONAL LIFETIME WARRANTY THEY ARE
ALSO 100% PROUDLY MADE IN THE USA.
ROYAL ARMS is well known the world over for our Bomb Disposal, Explosive Entry Equipment as well as the ammunition needed to effectively answer any situation thru our multiple offerings. We continue to manufacture cutting edge
items to answer the needs of the EOD community. Always looking to help the Bomb Tech, we welcome inquiries for
specialized equipment or ammunition.
ROYAL ARMS believes in American industry so strongly that when presented with the possibility of out-sourcing our
products/labor and materials to China, India or Mexico, Royal Arms International has declined these money saving procedures. Instead, we invested in our infra-structure by acquiring a 10,000 square foot facility located in Oxnard, CA, to
better serve our customer needs and to support the manufacturing in the United States.
As other companies are raising prices by as much as 60% and cutting jobs, here at Royal Arms, we are finding new
ways to be more efficient and reduce our manufacturing costs. We pass the savings on to you by not raising prices.
Royal Arms principals are founded on making quality products at fair prices, being loyal to our customers and listening
to their needs.
We encourage you to stop by our shop for a tour of our manufacturing facility and production. We want you to witness
first hand for yourself our commitment to quality and customer service. Ask yourself how important it is to have a
product MADE IN THE U.S.A. by American Ingenuity. We look forward to hearing from you.
GOD BLESS THE U.S.A. and our firearms.
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]