EOD Catalog2013:EOD Cat4.5.qk

Transcription

Disrupters in over 65 Countries Across the World
•
•
•
•
•
•
•
Disrupter Water Cannons
Standard and Electric Ammunition
Blasting Cap Containment
Carry Cases
• Training
Back Packs
• Laser Sights
EOD Equipment
• Stands
R & D Availability
I.E.D.
Bomb
Disposal
Equipment
1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253
Website: Http//www.RoyalArms.com • E-mail: [email protected]
DISRUPTER CANNONS
RADC-9 RADC-12
RADC-18 & RADC-24
Honed to a mirror finish for improved Accuracy /
Velocity and ease of cleaning. Accepts high
power loads and all commercial 12 Gauge. 24”
Barrel has a unique tapper length that reduces
overall weight and allow robots arms to articulate
easily by removing the weight in front. The rear
acts as a counter balance providing smooth operation for robots.
•Body length = 9.00” 12.00” 18.00" or 24”
•O.A.L. = +.75” Breach Bolt
•Weight = all under 8.25 Lbs
•Machined from 17-4 Stainless
•1.500" Diameter for strength
•1.500" Diameter taper to 1.25” for Robot use on 24”
•Precision gun drilled to .730”
•Honed to a mirror finish
•3-1/2" 12 Gauge Chamber
•Acme Threads - Quick solid lock up
•2-1/2" Welded Body ring
•6-1/4" Knurled back end
•External Laser location hole
•Chamfered exterior crown
•Reduced Breech bolt length
•6 & 7 Breach Bolt inserts for Electric and Time Fuse
RADC-9 Basic Includes RADC-BS, Stop
Plate, cleaning equipment and case w/ 6 and 7
Breach Bolt Inserts
RADC-9 Kit
Kit includes:
•
•
•
•
•
•
•
•
Disrupter Cannon, Breech Bolt inserts (6 & 7)
HB-10 Electric Igniter
RDI Shock Tube Igniter
4 Dz. Water Plug Sets
12 Rounds PBB-70
5 Rounds each PBA, PCA and SLUG
Stop plate w/ Bag Stand
Pelican 1450 custom case
Electric Ammunition at slightly higher price
LC-1 Kit
Royal Arms 18” Cannon Basic set in a box.
Includes:
• RADC 18 (Disrupter Cannon)
• Breech Bolt with inserts for Time Fuse & Electric
Shots
• WP (water plug)
• LC#1 (Custom Case with foam)
• PR (pushrod for cleaning)
DISRUPTER CANNONS & KITS
RADC-18 KIT Cannon & Accessories
Our Kit includes:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Disrupter Cannon with Breech Bolt inserts (6 & 7)
SL-500 Green Laser
Pushrod w/cleaning Mop
Dead Hammer
Disrupter Pole Stand and Cannon Holder with slide
HB-10 Electric Igniter
Electric Cable Reel
RDI Shock Tube igniter
4 Dz. Water Plug Sets
20 Rounds PBB-12E
15 Rounds each PBA-12E & PCA-12E
5 Rounds Slug-12E
10 Rounds PCA
12 Rounds PBB-7
iM2950 Custom Storm Case
RADC-24 KIT Cannon & Accessories
No Laser or Laser Holder included in Standard Kit. In-Line
Laser and Muzzle Break available as additional equipment
Ammunition not included in Kit
DD- Disposable Disrupter
Single use Disrupter perfect for long range trips No need to carry bulky or
heavy equipment, just a few different loads and an igniter or 9V battery in a
pinch. Can be used with an optional stop ring for placement in Robots or holders. Inexpensive alternative to dearmers.
• DD-PCA
Clayvon (clay/steel Mixture)
• DD-PBA
Copper Compressed
• DD-Slug
Hollow point (Solid steel )
• DD-PBB
Blank (Air or Water Shot)
• DD-FB
Flash BANG (Air ONLY!)
• DD-CSL
Customer Specified Load
DDRC- Recoilless Disposable Disrupter Same
specs as previous but RECOILLESS with adapter tube
• DDRC-PCA Clayvon (clay/steel Mixture)
• DDRC-PBA Copper Compressed
• DDRC-Slug Hollow point (Solid steel )
• DDRC-PBB Blank (Air or Water Shot)
• DDRC-FB Flash BANG (Air ONLY!)
• DDRC-CSL Customer Specified Load
• RDD-T Recoilless Launch Tube Required for Recoileless Use
Multi-use unit NOT disposable
DISRUPTER STANDS
DUCKFOOT #DF3DD
This Revolutionay device can be used for IED EOD Bomb Disposal
as well as Breaching, Multi-mount for ROBOT usage Depending on
the Robot mount, this may be attached vertically or horizontally to
allow for multiple shots from one deployment. Precision machined
6061 Aluminum
PS Disrupter Pole Stand
Fully adjustable base can be sand bagged to prevent blow over.
Adjustable Up, Down, Left, Right, Angle up Angle down. Head
interchangeable with all Royal Arms Disrupters. Total Weight 15.5
Lbs Height up to 9’
Smaller version w/18” poles fits in Travel Back Pack
Base T-section 1018 Steel Legs 6061 Aluminum
Head 6061 Aluminum
Poles Aluminum w/pvc cover
Bottom Pole Steel w/PVC cover
RADC-BS
The 5” square Bag Stand is designed for use with all Cannons.
included 1/4” Aluminum stop plate protects the bag from damage
and the variously angled corners facilitate unlimited shooting angles.
It has a top strap for carrying. Weight when filled 8 to 12 lbs.
Depending on fill. Total weigh of Cannon, Stop Plate and Bag Stand
for the 18” cannon is approximately 18 -1/2 Lbs.
TBP Travel Back Pack
Back pack Intended for use where space is critical in air transport,
repelling and remote operations. Unit carries cannons, igniters,
ammunition, water, bag stand, shock tube and ground-wire reels.
Separate Velcro® closures and pockets, retain individual items
securely and readily accessible for quick response. Side pocket carries Pole Stand with 18” legs Specify which cannon when ordering ,
DD- Disposable Disrupters, Recoilless units RADC-18, RADC-24,
RADC-2/D or PAN.
IGNITERS
ROYAL DUAL IGNITER
Royal Arms dual shock tube igniter is the smallest most reliable mechanical igniter on the
market today. It has been tested and proved in Iraq Afghanistan and other Hostile environments. When your shot is on the line trust our RDI every time.
Weight: 0.75 lbs.
Overall Length: 6”
w/ brass heads & connectors
Overall Height: 1.325”
w/ Trigger button
Body Length: 4.950”
Body Height: 0.635”
Body Width: 1.5”
RDI Body Material: 6061 T6 Black anodized Aluminum
Firing Pins, Stops, Trigger, Primary Safety, Springs, Bolts & Cross Bar Material:
made of Stainless and Steel- Zinc Coated for rust protection.
Receiver Heads:
Dual Safeties:
Knurled Brass
1.580” X 0.5”
Connectors: Quick Connects
Primary Safety: Trigger Sear Block Rotate forward to engage Safety showing green S When rotated 180º backwards, shows a Red F for fire.
Secondary Safety: Quick release pins which blocks firing pins
RDI-QDB Quick detach block
Navy style with clamp head. Requires
additional clamp attachment to back of RDI for mounting.
Sold individually and as a unit.
STI Single Pen Shock Tube igniter
STI Body is made of Solid 6061 T-6 Aluminum that’s been milled out. Stainless Steel
Internal parts, and a brass head with quick connect. Dual Safeties, one internal and one on
the body. Length 6-1/2” Dia. 1/2” Wt. 3 Oz.
BBI-8K
Shock tube Breach Bolt Kit
Breach bolt for use with all Royal Arms Cannons. Kit contains the SS Breach
Bolt w/magnetic inserts to hold SS ball (firing pin) 25 SS balls, the cleanout
extractor pin and 5 Push-fit connectors. Installation of this unit in a cannon
constitutes creation of a fire arm and is required to be registered with ATF.
Purchase of this item will be on separate PO and billed on separate Invoice.
CONNECTORS
BHQ (Lower Base Half)
Replacement Brass Head for Any Shock tube igniter with 7/16-20 threads
(Mark 54, Mark 55, Omni, DX10 RDI, STI)
• Slotted back for easy extraction
• Lower half base unit that accepts the primer
BH-OSC (Upper Half)
(1 needed per unit)
Compression Fit holds in Shock Tube from .080 - .150 Dia.
STC-B Upper Half Push-fit
1/8” Instant fit for use with standard Commercial Shock tube Blue top
STC-B2 Upper Half Push-fit
5/32 Instant fit for use with Military Grade Nonel Shock tube Black top
STC-B4 Upper Half Push-fit
1/4 Instant fit for use with Time Fuse
FROM LEFT TO RIGHT
BHQ w/ STC-B
BHQ w/ STC-B2
BHQ
BH-OSC
BHQ w/ BH-OSC
STC-Y Connectors
Steel Instant fit Shock tube connector
1 line in - 2 lines out
STC-Y2
Nylon Instant fit Shock tube connector Y fitting
1 line in - 2 lines out
STC-Y3 Brass Nickel Plate Instant fit Shock tube connector Y
fitting 1 line in - 2 lines out
STC-I Inline Connectors
Steel Instant fit Inline Shock tube
coupler
STC-I2
Nylon Instant fit Inline Shock tube coupler
We suggest you change your BH (Brass Heads) to our new style units with more options available for connections.
Parts used on our earlier Canons, are available in limited quantities.
WP Water Plug Sets Can also be used to keep dirt and debris out of
cannon while not in use. Black plug seals chamber. Red plug seals muzzle
EOD PRICE LIST 2013
All International / Export orders will be quoted based on Regulations
All listed prices are for U.S. Domestic sales only! and are subject to change without notice
Model#
Length
Dia.
Price
RADC-18 12GA. 3.5” Chamber
18.5”
1.5”
$995
Disrupter Cannon with External Breech Bolt, Stop ring, Breech bolt inserts BBI-6 & BBI-7
RADC-18 LCK
18.5”
1.5”
Cannon as above with Cleaning and Accessories kit in custom locking case
$1395.00
RADC-18 Kit Will shoot any commercial 12 gauge round
$4,295.00
RADC-18 Cannon, 1 Laser, cleaning Equipment, Dead Hammer, Pole Stand, HB-10, Electric Cable Reel,
RDI, Water Plug Sets, 75 Rounds various Ammunition, 3 Gal. Snot Kit, in a Storm custom case,
Industrial Tools
RADC-24 12GA. 3.5” Chamber
24”
1.5”>1.125” Taper
$1,095.00
Tapered barrel to reduce weight. Ideal for use on Robots, weights Under 8lbs. BBI-6 & BBI-7 . Also
available Recoilless Muzzle Break Ti-MB listed under the Tools Section
RADC-24 K 12GA. 3.5” Chamber
24”
Same equipment and accessories as the RADC-18 Kit
1.5”>1.125” Taper
$4,395.00
RADC-9 NEW - 12GA. 3.5” Chamber
9” Cannon
1.50”
$1,095.00
Replaces the IDC-9 units Now OD increased to 1.5” and uses standard External Breech Bolt
Kit includes Bag Stand/Stop Plate, Breech bolt Inserts (#’s 6 &7) Pushrod, in custom carry all case.
RADC-9 NEW Kit- 12GA. 3.5” Chamber 9” Cannon
1.50”
$2,395.00
Kit includes HB-10 & RDI Igniters, Water Plug, 27 Rounds Standard ammunition or Electric rounds at
slightly higher price. Please ask for pricing on All Electric option
BBI-8K Insert for all 12 Ga. External Cannons, Required for Standard primed Ammo
$129.00
Kit includes (1) BBI-8 Breech bolt insert, (4) STC-B 1/8” instant fit shock tube connectors,
(25) BBs-8 3/32 ball bearings, & PR-8 Push Rod for stuck Balls.
Disposable
Warning: Insertion of BBI-8 or BBI-5 in any of the cannons reclassifies it to an NFA weapon
and must be registered with ATF. Must be on a separate purchase order from any cannon sale!
DD-PCA/SLUG/PBA/PBB/FB/CSL 6” Cannon
1.125”
$43.00
12 GA. Disposable Disrupter - 6 different PRE loaded types (see catalog for detailed info)
DDRC-PCA/SLUG/PBA/PBB/FB/CSL 6” Cannon
1.125”
$46.00
12 GA. RECOILLESS Disposable Disrupter - 6 different PRE loaded types (see catalog for
detailed info)
RDD-T
10” Tube
1.750”
$275.00
12 GA. RECOILLESS HOLDER for DDRC Note! (Required for any DDRC to function properly).
5/2013
Standard Primed
Electrical Squibbed
AMMUNITION: 12 GA for use in Disrupters only!
Model#
Royal Ar ms 12 Gauge Ammunition will work with
Std. Primed - Blank/30 Gr. for Water/Snot Low Velocity
PBB-3
Std. Primed - Blank/50 Gr. for Water/Snot Low Velocity
PBB-5
Std. Primed - Blank/70 Gr. for Water/Snot High Velocity
PBB-7
Std. Primed - Blank/82 Gr. Ultra-High Velocity
PBB-UV
Std. Primed - Clayvon Frangible Slug
PCA
Std. Primed - Copper Frangible Slug
PBA
Std. Primed - Pointed Penetrator
CPA
Std. Primed - Hardened Slugs (Hollow Point)
SLUG
Std. Primed - Bean Bag (for PVC- I.E.D. 375 (FPS)
BB-EOD
Std. Primed - #9 Bird Shot (2600 FPS)
BS#9
Std. Primed - Copper/S-70 750 Gr..
TESAR-4
Packaging
Price
all Disrupters
Box of 12
48.00
Box of 12
48.00
Box of 12
54.00
Box of 12
56.00
Pack of 5
27.50
Pack of 5
27.50
Pack of 5
38.00
Pack of 5
35.00
Pack of 5
28.75
Pack of 5
27.50
Box of 12
66.00
Electrical Squibbed - Blank Red Dot H.V. (30 Grain)
PBB-3E
Box of 10
PBB-5E
Box of 10
PBB-7E
Box of 10
PBB-12E
Box of 10
Electrical Squibbed - Blank Ultra Velocity
PBB-UVE
Box of 10
Electrical Squibbed - Clayvon (365 Grains) most all IED
PCA-12E
Pack of 5
Electrical Squibbed - Copper Frangible (400 Grain)
PBA-12E
Pack of 5
Electrical Squibbed - Pointed Penetrator
CPA-12E
Pack of 5
Electrical Squibbed - Hardened Slugs (Hollow Point)
SLUG-12E
Pack of 5
Electrical Squibbed - Aluminum (LWP) High Speed
ALU-12E
Pack of 5
Electrical Squibbed - Bean Bag ( for PVC- I.E.D. 400 FPS) BB-12E
Pack of 5
Electrical Squibbed - #9 Bird Shot (2600 FPS)
BS#9E
Pack of 5
MOST AMMUNITION AVAILABLE IN 3.5” at a slightly higher price
Ammunition Components
3” 12 Gauge Premium Primed Hulls
PH
Electric Squib 1 Foot Lead (28 BR)
ES
Wads Unsplit Smooth Side
WADS
Clayvon Filled Wads
CFW
Clayvon Frangible Mix
CLAY
Brass Primer inserts to hold Squib head
BPIS
“SNOT” Kit, Replaces Water shot& double’s the distance SNOT
Snot Refills available in 4oz, 8oz, 16oz (Specify)
SNOT-R/4/8/16
70.00
70.00
75.00
75.00
75.00
42.50
42.50
47.50
45.00
42.50
40.00
37.50
Per 100
20.00
Each
2.50
Per 100
21.00
Each
1.75
Per LB.
15.00
Per 100
40.00
Per Kit
32.00
16.95, 24.95 & 36.95
AMMUNITION SHIPPING NOTE!!
All Electric Ammunition and Squib are subject to a $35.00 DOT UPS Hazard Charge per Box Ground. All non-electric Ammunition
shipped Next Day, 2nd Day or Third Day are subject to a $35.00 Charge per Box. These charges are per box over and above the
standard shipping charges. DOT Charges reflect US prices only.
IGNITERS Electric, Shock Tube Breach Bolt Shock Tube Inserts
Shock Tube Royal Dual Igniter uses 12 Ga. primers
Shock Tube Royal Dual Igniter w/QDB Quick Change Head
Navy Style Quick Disconnect Head
Electric Igniter w/built in Continuity tester
Shock Tube - Single Pen Igniter/NAVY style uses 12 ga. primers
Wizard Self Contained Continuity tester Triangle Design
ETI Pull String Continuity Tester
& Testers
RDI
RDI-QDB
QDB
EBM-15
STI
DSL
ETI
449.00
549.00
129.00
349.00
149.00
79.00
99.00
BBI-8K Insert for all 12 Ga. External Cannons, Required for Standard primed Ammo
$129.00
Kit includes (1) BBI-8 Breech bolt insert, (4) STC-B 1/8” instant fit shock tube connectors,
(25) BBs-8 3/32 ball bearings, & PR-8 Push Rod for stuck Balls.
Warning: Insertion of BBI-8 or BBI-5 in any of the cannons reclassifies it to an NFA weapon
and must be registered with ATF. Must be on a separate purchase order from any cannon sale!
STANDS:
Pole Stand 4 piece unit 6 foot Height (12’ maximum)
Pr. Stop Plates Stand 3/8” Aluminum” for RADC-18 & 24
Bag Stand/Stop Plate (For RADC-2 - 12lbs filled weight)
Model#
PS
SPS
RADC-BS
LASERS
Boresight Laser 5mw Green High Visability
SG-120 Inline laser Lifetime Warentee
SL-500
SG-120
CASES: Note! (All cases come with Custom Foam Cutouts Replacement foam available)
Lockable Case for RADC Disrupter & Basic Parts
LC-1
Custom Storm Case for RADC Disrupter Kit, Stand & all parts
PCC-1650
Custom Pelican Case for RADC 9 Disrupter & all Parts in Kit
PCC-1450
Travel Back Pack (Specify Disrupter)
TBP
TOOLS
Dual Shock Tube/Fuse Cutter
Dual Shock Tube/Fuse Cutter replacement Blades
Dual Blasting Cap Crimp Non-Metallic -- Non-Sparking
EOD Safety Mirror Kit and Accessories
(Punch, Spare Mirrors and Case included)
Recoilless Titanium Muzzle Break for 24” Cannon
Gerber Titanium/Delrin Probe Kit
D.E.T. Multi-Plier 600 w/Case
DC-5
DC-5 Blade
DC-6
ESMK2
Ti-MB
PKG
D.E.T.
Price
$475.00
65.00
99.00
249.00
499.00
225.00
399.00
225.00
399.00
149.00
5.50
149.00
349.00
1249.00
199.00
105.00
ELECTRIC PARTS, REELS and ACCESSORIES
Electric Cable Reel - 310 Ft Cable on Winder Reel 5.5Lbs
Travel Reel 5 ” X 2 1/2“ With 200’ Electric Cable w/1 folding and 1straight handle
Travel Reel - Blank Only 5” Dia..
Travel Reel - Blank with Handles
Blasting Cap Travel/Fire Safety Tube (304 Stainless)
PAN Breech Bolt KIT for Electric & time fuse
SHOCK TUBE PARTS:
Brass Head for Any Shock tube igniter (7/16x 20 TPI).
Brass Head Compression tip for BHQ
Shock Tube instant fit 1/8” Connector Commercial
Shock Tube instant fit 5/32” Connector Military
Shock Tube Inline Instant fit Connector
Shock Tube Inline NYLON Push fit Connector
Shock Tube Y Connector NYLON Push fit
Shock Tube Y Connector Nickel Plated Brass Push fit
External Shock Tube Insert (BCX External cannon required)
Replacement Firing Pins .094 Bearing (BBI#8 required)
External Breech Cap for RADC18X, RADC24 & IDC9
Clean Out tool for BBI-8
Model#
Reel
T REEL-E
Packaging
Each
Each
Price
189.00
175.00
TRB
TRW
BCT
Pan BB
Each
Each
Each
Each
21.00
110.00
299.00
179.00
BHQ
BH-OSC
STC-B
STC-B2
STC-I
STC-I2
STC-Y2
STC-Y3
BBI-8k
BBs-8
BCX
PR-8
Each
Each
Each
Each
Each
Each
Each
Each
Each
100pcs
Each
Each
16.50
11.00
4.40
4.00
4.00
4.00
5.00
11.00
129.00
15.00
159.00
10.95
REPLACEMENT PAR TS The parts listed below are the most commonly Used, Lost or damaged items.
Instruction Manual Replacement Complete
Pole Stand 2 Ft Aluminum Section w/ Bolt
Pole Stand 2 Ft Steel Section no bolt
Sleeve for IDC, for use in DCS & PS Stands
Push Rod (2-pc. set)Water plug seating &Cleaning
Dead Hammer 1Lb (for Breech Bolt lock up )
Water Plug Sets (Red & Black) Packed 25 per bag
Water Plugs For Recoil-less Disrupter Tube
Replacement Bag Stand for IDC Cannon
INST
PSP-Alum
PSP-Steel
IDC-SH
PR-1
DH
WP
DDRC-WP Per Dz..
RADC-BS
5.00
41.00
50.00
22.00
40.00
18.00
7.50
12.00
99.00
REPLACEMENT PARTS AND REPAIR SERVICES FOR
ALL ROYAL ARMS MANUFACTURED EQUIPMENT AVAILABLE
Cannon Stands, Cannon Components ie Breech Bolts, Breech Bolt Inserts for Internal and
External Cannon’s (New and old designs) Dual and Single Shock Tube Igniters
Please call for pricing and up-dating of your older equipment
If you have any questions about use of our equipment,
PLEASE contact us, we will be glad to assist you.
Complete line of 12 Gauge Disrupter Ammunition
STANDARD PRIMED
AMMUNITION
ELECTRIC PRIMED
PBB-3, 5, 7 & UVE Standard Prime Blank
PBB-3E 5E, 12E & UVE Electric Blanks
Standard primed and Electric low and hign powered blanks for use with
Water/ SNOT or air Shots
Velocity:
see ammo spec sheet
Distance:
1”- 6” or to 3 Feet with SNOT
Angle:
Various
Target:
PVC Pipe, Brief/Suite Cases, Ammo Cans
PBA Copper Frangible Standard and PBA-12E Electric
420 Grain Frangible Copper projectile for pipe bomb and Grenades
Velocity:
2,390 Ft p/sec -18” Barrel
Distance:
6”- 30 Feet
Angle:
7º-11º or 90º
Target:
Grenades (cast only), Pipe to 2 1/2”
PCA Standard and PCA-12E Electric Clay S/70 Steel
365 Grain Clay S/70 Steel mix for All Pipe bombs and galvanized
IED’s
Velocity:
2,450 Ft p/sec -18” Barrel
Distance:
6”- 60 Feet
Angle:
7º-11º or 90º
Target:
Ammo cans, and pipes to 2.5”
SLUG Standard & SLUG-12E Electric Hollow Point
541 Grain Hollow Point 4130 Steel hardened to 58-62 Rockwell
Velocity:
2,260 Ft p/sec -18” Barrel Standard
Velocity:
2,190 Ft p/sec -18” Barrel Electric
Distance:
6”- 30 Feet
Angle:
Various
Target:
Grenades, Copper IED’s, 3/8 Steel plate, galvanized
pipe, 90º pipe and internal thread pipe bombs
CPA Penetrator Point CPA-12E Penetrator Point
625 Gr. Penetrator Point 4130 Steel hardened to 58-62 Rockwell for
Velocity:
2,370 Ft p/sec -18” Barrel Standard
Velocity:
2,340 Ft p/sec -18” Barrel Electric
Distance:
6”- 30 Feet
Angle:
90º or 0º only
Target:
CO2 Bottles, 3/8 Steel plate, Heavy Duty galvanized
pipe, reinforced IED
ELECTRICAL
EBM-15 Electric Blasting Machine w/ Built in Continuity
Royal Arms Contracted with EIT corp to have the ultimate in reliable
and safe blasting machines for use in Blasting or EOD IED demolitions.
• 150VDC 1.25 Joules 50 Ohm 9V Battery
• Wareproof - Impact Resistant • Pushbutton Switch Protectors
• Quick Connect Binding Posts • 2 Second Charge Fire
• Compact 3 ” w x 1.5”d x 4”h design
• Built in Redundant Safeties • Separate circuit for Continuity & Fire
EIT-CT Pull String Continuity tester for firing circuits and explosive devices.
• LED “On” indicates a good circuit
•
•
•
•
•
•
EXTRA bright Readable in direct sunlight.
Lightweight waterproof polymer housing
Output of less than 5 milli-amps.
All Mil-Spec components.
900% safety factor
Pull String belt clip
DSL Demolition Safety Light Electrical continuity tester.
•
•
•
•
•
•
•
•
Reads 10+Mil-Spec blasting caps over 3000 feet of 22 Ga wire.
Over 120 hours of continuous duty or 90,000 five-second circuit tests.
LED “On” indicates a good circuit - readable in direct sunlight.
Lightweight waterproof polymer housing designed for positive “feel”.
Output of less than 5 milli-amps.
Size 1-3/4” X 3/4” - Total weight 1-3/4 ounce
All Mil-Spec components. • 900% safety factor.
Seven year shelf life. - Guaranteed.
REEL
Electric Cable reel with Red and Black Coated connections for easy Hook
up. Anchor on body makes it easy to wind up and Has 310 feet of cable
so you have enough room to stand clear. Weighs just 5 lbs and is 12x9x4
T Reel-E Equipped with electric cable
5” Dia. w/ 200 feet of cable. Made of polyurethane. The primary handle
is cam mounted to spin Free and fold flat to the side. The secondary
handle is Removable. Individual blank reels, TRB are available with
and without handles. Change time for handles is less than 30 seconds.
Kit Accessories & Misc.
DH- Dead Hammer
For opening Breech Bolt when locked shut. Hit hammer on end of
bolt to knock loose
PR Push Rod
Three piece Cleaning/extraction rod and brush. Used to clean as well as extract shells. The Rear section seats the water plug
to the proper depth (shown at left). PR-1 (not Pictured) has an additional section for the RADC-2/D cannon & the RADC-24
SL-500 LASER
The SL-500 uses an ultra bright green laser which is 50 to 100 times brighter than red lasers, and is much easier to see in
daylight. The SL-500 uses one DL 123 Lithium Battery (included) that provides a battery life of up to 10 hours (continuous
use). The SL-500 uses the latest laser technology to provide superior boresighting accuracy. Super-strong magnets in the
arbor securely centers the laser within the muzzle for consistent accuracy. A unique system of adapters and O-rings make
for a snug accurate fit.
TI-MB Titanium Muzzle Brake
Fits RADC-24 Cannons and all 1.125 barrels. Will work
with Robot mounts and not interfere. Significantly
reduces recoil on robot arms, by up to 80% and retards
the muzzle blast allowing you to get even closer on water
shots or other slug shots
EOD TOOLS
DC-6 Dual Blasting Cap Crimper
Key Features:
1. Dual Blasting Cap Crimper, Fuse Cutter & Explosive Punch
2. Light Weight 3 oz.
3. Symmetrical uniform Teeth
4. Machined from Solid 7075 Billet Aircraft Aluminum
5. Hard Black Anodized to RC 50
6. Non-reflective black coating
Technical Specs:
• Length: 7.05 in. (179mm)
• Width: 1.750 in. (44.5mm)
• Thickness: 0.35 in. (8.9mm)
• Weight: 3 oz. (0.09 kg)
• Powder Punch Diameter: .25 in. (6.5mm )
• Powder Punch Length: 2.2 in. (56mm)
• Materials: 7075 Hi Strength Billet Aircraft Aluminum
• Finish: Mil Spec Type III Class II Hard Black Anodized to RC 50
• GSA Schedule: GS-07F-0407V
DC-5 Det Cord / Shock Tube Cutter
Key Features:
1. Dual Edge Razor Blade w/ guillotine action cutting
2. Machined from Solid 7075 Billet Aircraft Aluminum
3. German Stainless Steel Razor Blade
4. Hard Black Anodized to RC 50
5. Non-reflective black coating
6. Light Weight 3 oz.
Technical Specs:
• Length: 6.85 in. (174mm)
• Width: 1.625 in. (41.25mm)
• Thickness: 0.35 in. (8.9mm)
• Weight: 3 oz. (0.09 kg)
• Materials: 7075 Hi Strength Billet Aircraft Aluminum
• Blade: 316 Surgical German Stainless
• Finish: Mil Spec Type III Class II Hard Black Anodized to RC 50
• GSA Schedule: GS-07F-0407V
RECON
Model# ESMK2 - EOD/ ICE MIRROR Kit
The finest observation mirror available. Rugged, dependable and lightweight. A great addition to any department
Description: A revolutionary EOD / SWAT /ICE Search Mirror Model# ESMK2 that is quickly deployable and can be configured with multiple heads for any environment or situation. The unique flat mirror will not distort or Fish Eye the area to be cleared or checked. The Mirrors are made
from a light weight acrylic that is very durable and inexpensive to replace, unlike tradition glass it will not crack or shatter and leave sharp dangerous parts for a suspect to pick up. Our Universal thread adaptor is the heart of the quick change system, this allow the use of most any threaded type
extentions painter pole
History/Background: The EOD ICE Mirror (ESMK2) was created to overcome the stress and weight of traditional search mirrors which are
heavy,bulky and hard for the operator to use on extended periods. One of the major design flaws with traditional search mirror is that you need a separate mirror for a given situation. Which then adds more bulk and weight.
Benefits/Advantages: Our EOD ICE Mirror (ESMK2) solves all of the problem associated with traditional search mirrors. Our EOD ICE Mirror
are not limited to only one mirror shape or size. One of the major design features is the ability rapidly configure or change out the mirror in a matter of seconds depending on the situation or change tools to a glass breaker, door stop /wedge, Door Latch opener and a variety of other tools. This
is accomplished by our universal thread adaptor which is the heart of the quick change system. The universal thread adaptor mounts to virtually any
standard threaded painter pole, so no costly proprietary hardware is needed. This allows the operator to change between a compact 2 ft search mirror all the way to a 16ft extension search mirror and still be able to quickly change the head for different mirrors and or tools. Our EOD ICE Mirrors
are durable and will not break if dropped or stepped on. The pole is very light weight the whole package weighs only 2 lbs for a 4ft - 8ft extension
search mirror.
Status: Currently Available
Potential Targets/Applications: Car Inspections, Suspect
Apprehension
Building Clearing, Prison/Civil Rioters
Primary Users: Law Enforcement, Military
Physical Data:
- Length Collapsed = 24”, 48” or 96”
- Length Extended = anywhere from 24” to 16ft
- Weight = 2lbs (4ft - 8 ft pole)
- Mirror Sizes = 10x10, 8x14
-Round Mirrors 4”, 6”, 8”&12”
•
•
•
•
•
•
•
•
Performance Characteristics:
10”x10” acrylic mirror, replaceable.
Swivel head rotates 210 degrees.
Impervious to Heat / Cold, Shatter resistant
CNC Machined Aerospace Aluminum fittings.
Threaded to fit most paint roller extensions.
Quick detach head allows rapid deployment.
Optional tools - Glass spike, Door Wedge.
Folds flat for easy storage
MADE IN AMERICA
BY AMERICANS
ROYAL ARMS INTERNATIONAL, Inc, based in Oxnard, California manufactures the finest Bomb Disposal equipment
for Law Enforcement, Military & Government Agencies, worldwide, bar none. With great pride and a strong commitment to quality, Royal Arms offers a leading line of precision-engineered, durable and effective products. Our line is
manufactured using the highest Quality Alloys and state of the art manufacturing techniques. The result is a superior
product, with enhanced technical capabilities, which in turn offers law enforcement and military personnel the ultimate
tactical advantage in the field.
NOT ONLY ARE OUR PRODUCTS BACKED UP BY AN UNCONDITIONAL LIFETIME WARRANTY THEY ARE
ALSO 100% PROUDLY MADE IN THE USA.
ROYAL ARMS is well known the world over for our Bomb Disposal, Explosive Entry Equipment as well as the ammunition needed to effectively answer any situation thru our multiple offerings. We continue to manufacture cutting edge
items to answer the needs of the EOD community. Always looking to help the Bomb Tech, we welcome inquiries for
specialized equipment or ammunition.
ROYAL ARMS believes in American industry so strongly that when presented with the possibility of out-sourcing our
products/labor and materials to China, India or Mexico, Royal Arms International has declined these money saving procedures. Instead, we invested in our infra-structure by acquiring a 10,000 square foot facility located in Oxnard, CA, to
better serve our customer needs and to support the manufacturing in the United States.
As other companies are raising prices by as much as 60% and cutting jobs, here at Royal Arms, we are finding new
ways to be more efficient and reduce our manufacturing costs. We pass the savings on to you by not raising prices.
Royal Arms principals are founded on making quality products at fair prices, being loyal to our customers and listening
to their needs.
We encourage you to stop by our shop for a tour of our manufacturing facility and production. We want you to witness
first hand for yourself our commitment to quality and customer service. Ask yourself how important it is to have a
product MADE IN THE U.S.A. by American Ingenuity. We look forward to hearing from you.
GOD BLESS THE U.S.A. and our firearms.

EOD Catalog2013:EOD Cat4.5.qk

Transcription

Similar documents

Eod Catalog 2014

eod bomb disposal catalog

Where you come to know.

zazu`s

Tube Lines - London Underground Network

Ampeg SVT-CL Schematics

beschriftung komplettsystem_gb

DynaShield

Bridge of honor

NB-180 NEWBURG