Spare Parts documentation

Transcription

presents
Spare Parts Manual
for
MaxiSpan® - MultiSpan® - MonoSpan® - MiniLink®
Stainless Steel, Painted, & Aluminum Conveyors
Revised Jun 2008
© 2008 SpanTech
GUARANTEE OF QUALITY
SpanTech LLC has carefully designed, manufactured, inspected and individually tested all Designer
System® conveyors and/or components prior to delivery or shipment. In the unlikely event you find a defect in
materials or workmanship within one (1) year after receipt of product, we will promptly repair or replace the
product(s), in accordance with our Limited Warranty below. Our liability is limited to replacement of the product
and this warranty does not apply to altered or misapplied products.
Limited Warranty
SpanTech LLC warrants to the initial purchaser that all Designer System® products will be free from defects in material
and workmanship for a period of one (1) year after receipt. Any claims made under this warranty are subject to inspection by Span
Tech LLC or by a certified representative upon receipt of defective product(s) returned to SpanTech LLC freight prepaid. Upon
satisfactory proof-of-claim, SpanTech LLC obligation under this warranty is limited to making suitable repairs or corrections, or
at its option, replace the defective parts – free of charge – F.O.B., destination. The provisions of this warranty shall not apply to
any Designer System® product that has been subjected to misuse, improper applications (environmental effects), improper
installation or operation, or any product which has been altered or repaired without prior written consent of SpanTech LLC. THIS
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event shall SpanTech LLC
assume liability or responsibility, either directly or by way of contribution or indemnity on any claim of any kind, whether in
contract, tort or otherwise, for direct, special, incidental, or consequential damages resulting from the manufacture, sale, delivery,
or use of any product sold hereunder, in excess of the cost of replacement or repair as provided herein. SpanTech LLC makes no
other warranty, expressed or implied, except as set forth above.
IMPORTANT NOTE: Any product purchased from SpanTech LLC that is not a Designer System® product will be warranted
by the standard manufacturer's warranty. This warranty is usually void if the product has been altered or repaired by someone other
than an authorized representative for the manufacturer of that particular product.
Revised Jun 2008
 2008 Span Tech
Safety Guidelines
and Information
• Read and follow all operating and product safety instructions.
• Read and observe all safety labels and warnings; immediately
replace any soiled, defaced, or missing labels.
• Use proper LOCKOUT and TAGOUT procedures, following
OSHA regulations, to remove or neutralize all energy sources
(electrical, mechanical, pneumatic, hydraulic, gravity, and other)
prior to performing any conveyor system maintenance.
• Only use parts supplied or authorized by SpanTech.
• Only authorized and trained personnel may perform maintenance
on a conveyor or associated equipment.
• Only authorized and trained personnel may perform maintenance
on an electrical control panel.
• Never climb or walk on any part of the conveyor system.
• All personnel working in the vicinity of a conveyor shall be
instructed as to the locations and operation of normal and emer
gency stopping devices.
• Restart the conveyor system at the device or location from which
it was stopped.
THINK
THE SAFE WAY
IS THE
BEST WAY
• Do not start conveyor or associated automation until all person
nel are clear.
• Do not place articles or extremities into conveyor/transfer chain
or frame while in operation. Failure to comply could result in
personal injury and/or damage to the conveyor.
• Keep clear of conveyors and transfers. Conveyors and/or trans
fers may start at any time.
• Secure any loose clothing or hair; remove all jewelry, finger
rings, pocket key rings, etc. Failure to comply could cause
personal injury and/or damage to the conveyor.
• Training of personnel shall include instruction in operation
under normal conditions and emergency situations.
• Do not remove any guards or safety devices; all guards and
safety devices shall be maintained in position and in safe repair.
• Keep extremities away from shear points and conveyor chain.
Failure to comply could result in serious injury.
• Do not use the transfer or any conveyor components in a prohibi
tive environment.
• Do not exceed the transfer’s maximum speed of 180 fpm.
revised 03/08
© SpanTech, LLC
Straight Bed Section Assembly
Center Support
T-Rail
This is the typical assembly
of center support rails for a
field break location of a
conveyor bed section.
(Only used on
Conveyors
13.21" [335.6mm]
and wider)
Flat Washer
Side Frame Material
Hex Head Cap Screw
Whiz Nut
Wearstrip
Crossbar
for Straight Bed Sections
Connecting Strap
Nail Rivet
(use w/Spanlon Wearstrip)
Revised Jun 2008
©2008 SpanTech
Horizontal Bend Assembly
Center Support
T-Rail
(Only used on
Conveyors 13.21" [335.6mm]
and wider)
Hex Head Cap Screw
Flat Washer
Side Frame Material
Wearstrip
Whiz Nut
Nail Rivet
(use w/Spanlon Wearstrip)
Connecting Strap
Crossbar
for Horizontal Bend
Bed Sections
Revised Jun 2008
©2008 SpanTech
Vertical Bend Assembly
Whiz Nut
Whiz Nut
Multispan Crossbar
for Vertical Bend
(only used for Vertical
Bends of 30° and greater)
Plastic Vertical Bend
Hex Head
Cap Screws
Vertical Bend
Connecting Strap
(one strap per side is used
for Vertical Bends 0-29°;
two straps per side are used
for Vertical Bends of 30° and
greater)
Revised Jun 2008
©2008 Span Tech
Drive / Idler Assembly
* (Used on Conveyors
13.21" [335.6mm]
and wider)
* Center Support
The drive and idler crossbars are turned upside down
so that the lip edges face down in conveyors that do not
require center support rail(s).
T-Rail
Plastic
Drive Side Plate
Left Side
Hex Head
Cap Screw
Sprocket Kit
Hex Head
Cap Screw
Sprocket
Shear Pin
Drive / Idler Crossbar
Flat Washer
1 1/4" Stainless Steel Drive Shaft
Stainless Steel
Keystock
Plastic
Drive Side Plate
Right Side
Sprocket
Sprocket
Reinforcing Plate
Plug
Shield
Drive Shaft
Crescent Ring
O - Ring
Plug for
End Cap Inserts
Stainless Steel Drive Side Plate
Wearstrip
Flathead Screw
Bearing
Drive / Idler Kit
Drive Side Plate
End Cap With Hole for
Drive Shaft
(Shield required)
Pan Head Screw
(4 per Drive Side Plate Wearstrip)
Shield
Drive Side Plate
End Cap - Plain
(No shield required)
Revised Jun 2008
©2008 SpanTech
MultiSpan
Chain
Spare Parts References
Revised Jun 2008
© 2008 SpanTech
MultiSpan Chain Links
(A = Acetal Material) (S = Santoprene Material) (PU = Polyurethane Material*)
Center Links
0.24"
6.0mm
0.24"
6.0mm
0.24"
6.0mm
1.18"
30.0mm
1.18"
30.0mm
DS 0001A
Center Link - Plain - Acetal
DS 0001P
Center Link - Plain - Polyethylene
0.26"
6.5mm
DS 0001S55
(Durometer 55)
Center Link - High Friction
DS 0001PU70
(Durometer 70)
Center Link - Polyurethane
*
DS 0002-01A
Center Link
6mm Raised Top
DS 0002PU70
(Durometer 70)
Center Link
6mm Raised Top - Polyurethane
DS 0002S-01S55
(Durometer 55)
Center Link
6mm Raised Top - High Friction
*
CL
1.18"
30.0mm
1.18"
30.0mm
0.24"
6.0mm
2.95"
75.0mm
DS 0003-01-01A
Center Link
30mm Raised Top Cleat
0.39"
10.0mm
0.39"
10.0mm
0.24"
6.0mm
0.49"
12.5mm
C
L
DS 0005A
Center Link
30mm Pusher Cleat
DS 0005 (S55-S87)
(Durometer 55 or 87)
Center Link
30mm Flexible Pusher Cleat
DS 0005A-75
Center Link
75mm Pusher Cleat
DS 0004-01-BT-55
(Durometer 55)
Center Link
6mm Brush Top
DS 0004-BT-PU
(Durometer 70)
Center Link
6mm Brush Top - Polyurethane
*
DS 0010-BT-55
(Durometer 55)
Center Link
10mm Brush Top
DS 0010-BT-PU
(Durometer 70)
Center Link
*
MultiSpan Chain Link Assembly
0.63"
16.0mm
0.59"
15.0mm
MultiSpan Chain Rod
DS 0053P
Center Link
Ø16.0mm Barrel Roller
MultiSpan
Blue PVC Tube
DS 0054-01A
MultiSpan Ø16.0mm
Tube Top Bearing
DS 0140A
MultiSpan
Chain Link
Lock Tab
* NOTE: Polyurethane Link color shown is for illustration only;
actual Polyurethane Links are transparent and colorless.
Revised Jun 2008
©2008 SpanTech
(A = Acetal Material)
Left Side Links
Rod Pitch
0.98"
25.0mm
0.24"
6.0mm
0.24"
6.0mm
1.18"
30.0mm
1.29"
32.8mm
DS 0120A
Left Side Link - Plain
DS 0124-01A
Left Side Link - 6mm Raised Top
2.48"
63.0mm
DS 0123A
Left Side Link
30mm Moving Side Guide
DS 0146A
MultiSpan Combo
DS 0148A
MultiSpan Combo
Left Side Link - 6mm Raised Top
Right Side Links
0.24"
6.0mm
0.24"
6.0mm
1.18"
30.0mm
DS 0121A
Right Side Link - Plain
DS 0125-01A
Right Side Link - 6mm Raised Top
DS 0122A
Right Side Link
DS 0147A
MultiSpan Combo
DS 0149A
MultiSpan Combo
Right Side Link - 6mm Raised Top
Revised Jan 2005
©2005 Span Tech
Super Tight Links
DS 0126-02A
Twin Left Link - Super Tight
Plain
DS 0127-02A
Twin Right Link - Super Tight
Plain
DS 0136-01A
Twin Left Link - Super Tight 75mm
Moving Side Guide
DS 0137-01A
Twin Right Link - Super Tight 75mm
Moving Side Guide
DS 0128-03A
Left Link - Super Tight
DS 0129-03A
Right Link - Super Tight
DS 0135-02A
Center 7-Link - Super Tight
6mm Raised
DS 0132-02A
Twin Left Link - Super Tight
6mm Raised
DS 0133-02A
Twin Right Link - Super Tight
6mm Raised
DS 0138-01A
Left Link - Super Tight
and Pusher Twin Link
DS 0139-01A
Right Link - Super Tight
and Pusher Twin Link
DS 0135-02A-____M
Center Link - Super Tight
6mm Raised
Milled to ____ links wide
DS-C-ST-PL-1-A
Center Link - Super Tight
Plain - Acetal
DS-C-ST-PL-3-A
Plain - Acetal
Super Tight Chain
Link Assembly
DS-C-ST-6MM-RT-3-A
6mm Raised - Acetal
MultiSpan Chain Rod
DS-C-ST-PL-2-A
Center Twin Link - Super Tight
Plain - Acetal
DS-C-ST-6MM-RT-2-A
6mm Raised - Acetal
DS 0134-02A
Plain
DS 0140A
MultiSpan
Chain Link
Lock Tab
Revised Jun 2008
©2008 SpanTech
(S = Santoprene Material)
Super Tight Links - High Friction
DS-C-ST-PL-2-S
Plain
DS-C-ST-PL-3-S
Plain
DS-C-ST-6MM-RT-2-S
6mm Raised
DS-C-ST-6MM-RT-3-S
6mm Raised
DS-C-ST-6MM-BT-2-S
6mm Brush Top
DS-C-ST-6MM-BT-3-S
6mm Brush Top
DS-C-ST-10MM-BT-2-S
10mm Brush Top
DS-C-ST-10MM-BT-3-S
10mm Brush Top
Revised 12/02/05
©2005 SpanTech
(PU = Polyurethane Material)
Super Tight Links - High Friction
DS-C-ST-PL-2-PU
Plain
DS-C-ST-PL-3-PU
Plain
DS-C-ST-6MM-RT-2-PU
6mm Raised
DS-C-ST-6MM-RT-3-PU
6mm Raised
DS-C-ST-6MM-BT-2-PU
6mm Brush Top
DS-C-ST-6MM-BT-3-PU
6mm Brush Top
DS-C-ST-10MM-BT-2-PU
10mm Brush Top
DS-C-ST-10MM-BT-3-PU
10mm Brush Top
Revised 12/02/05
©2005 SpanTech
Closed Top Links
DS 0067A
Left Link - Plain
DS 0070A
Left Link - Closed Top
Moving Side Guide
Pusher Cleat
DS 0063A
Right Link - Plain
DS 0066A
Right Link - Closed Top
Moving Side Guide
Pusher Cleat
DS 0068A
Left Link - Pusher Cleat
DS 0064A
Right Link - Pusher Cleat
DS 0069A
Moving Side Guide
DS 0065A
Moving Side Guide
DS 0061A
Center Link - Closed Top
Plain
DS 0057A
Moving Side Guide
Scoop Cleated
DS 0056A
Moving Side Guide
Scoop Cleated
Closed Top Chain Link Assembly
DS 0062A
Pusher Cleat
MultiSpan Chain Rod
DS 0058A
Scoop Cleat
DS 0060A
Barrel Roller - Closed Top
DS 9964-CT-01
Return Chain Support Tab - Closed Top
DS 0140A
MultiSpan
Chain Link
Lock Tab
Revised Jun 2008
©2008 SpanTech
MaxiSpan
Chain
Revised Jun 2008
© 2008 SpanTech
MaxiSpan Chain Links
(A = Acetal Material) (S = Santoprene Material)
Center Links
100.0 mm
3.94 in
DS 5201A
Center Link - Plain
6.0 mm
0.24 in
DS 5201S55
(Durometer 55)
Center Link - High Friction
DS 5203A
Center Link 6mm Raised Top
75.0 mm
2.95 in
6.0 mm
0.24 in
DS 5203S55
(Durometer 55)
Center Link - 6mm Raised Top
High Friction
New MaxiSpan Chain Link Assembly
DS 5205A
Center Link - 75mm Cleat
MaxiSpan Chain Rod
DS 0220A
MaxiSpan
Chain Link
Lock Tab
Revised Jun 2008
©2008 SpanTech
Left Side Links
104.6 mm
4.12 in
DS 5212A
Left Side Link
6mm Raised Top
DS 5210A
6.0 mm
0.24 in
75.0 mm
2.95 in
DS 5214A
with 75mm Moving Side Guide
6.0 mm
0.24 in
6.0 mm
0.24 in
30.0 mm
1.18 in
75.0 mm
2.95 in
DS 5218A
DS 5216A
Left Side Link
6mm Raised Top
CL
30.0 mm
1.18 in
DS 5220A
Left Side Link
6mm Raised Top
18.5 mm
0.73 in
8.5 mm
0.33 in
CL
75.0 mm
2.95 in
DS 5222A
Left Side Link - 75mm Cleat
75.0 mm
2.95 in
DS 5224A
Left Side Link - 75mm Cleat
Revised July 2003
© 2003 Span Tech
Right Side Links
104.6 mm
4.12 in
Rod Pitch
50.0 mm
1.97 in
6.0 mm
0.24 in
75.0 mm
2.95 in
DS 5232A
Right Side Link
6mm Raised Top
DS 5230A
DS 5234A
6.0 mm
0.24 in
6.0 mm
0.24 in
30.0 mm
1.18 in
75.0 mm
2.95 in
DS 5238A
DS 5236A
Right Side Link
6mm Raised Top
18.5 mm
0.73 in
8.5 mm
0.33 in
30.0 mm
1.18 in
DS 5240A
Right Side Link
6mm Raised Top
C
L
C
L
75.0 mm
2.95 in
DS 5242A
Right Side Link - 75mm Cleat
75.0 mm
2.95 in
DS 5244A
Right Side Link - 75mm Cleat
Revised July 2003
©2003 Span Tech
MonoSpan
Chain
Revised Jun 2008
© 2008 SpanTech
MonoSpan Chain Links
(A = Acetal Material) (S = Santoprene)
95.5 mm
3.76 in
95.5 mm
3.76 in
6.0 mm
0.24 in
DS 0200-01A
MonoSpan Plain
Chain Link
DS 0200-01S55
MonoSpan Plain
High Friction Chain Link
DS 0200-03A
MonoSpan 6mm Raised Top
Chain Link
MonoSpan Chain Assembly
MonoSpan
Chain Link Rod
6.0 mm
0.24 in
DS 0200-03S55
MonoSpan 6mm Raised Top
High Friction Chain Link
DS 0220A
MonoSpan
Chain Link
Lock Tab
Revised Jun 2008
©2008 SpanTech
J-Trax
Chain
Revised Jun 2008
© 2008 SpanTech
J-Trax Chain Assembly
ILLUSTRATION
J-Trax Link
DS0156-02A
Right Side J-Trax Link (shown)
DS0155-02A
Left Side J-Trax Link (mirrored)
J-Trax additional Chain Rod
Standard Multi Chain Rod
Revised Jun 2008
©2008 SpanTech
MiniLink Straight Bed Section Assembly
Connector Plate
MiniLink Straight Bed Section
Connected to Idler Assembly
(Flat End of Section)
FLOW
DIRECTION
Nylock Nut
Connected to Drive Assembly
(Flat End of Section)
Intermediate Bed Section Assembly
(Bed Locking Feature Both Ends)
Hex Head Cap Screw
View of Assembled
MiniLink Bed Section
Revised Jun 2008
©2008 Span Tech
MiniLink Drive / Idler Assembly
MiniLink Drive
Assembly Kit
MiniLink Sprocket
Assembly Kit
(Shaft not Included)
Nylock Nut
MiniLink Drive Shaft
(Not Included with Drive Assembly Kit)
MiniLink Drive/Ilder
Shim Plate
Flat Washer
MiniLink Drive/Idler
Chain Guide
Stainless Steel
Sprocket Shear Pin
MiniLink Idler
Assembly Kit
Molded Chassis
Hex Head Cap Screw
MiniLink Idler Shaft
Flat Washer
C-Ring
SS Flange Bearing
Slotted Flat Head
Sheet Metal Screw
Revised Jun 2008
©2008 SpanTech
MiniLink Chain Links
(A = Acetal Material) (PU = Polyurethane Material)
30mm Chain Links
0.39"
10.0mm
0.16"
4.0mm
30mm MiniLink Chain Assembly
1.18"
30.0mm
DS8010-30-06
30mm MiniLink - Plain
DS8010-30-BT
(Durometer 85)
30mm MiniLink
DS8010-30BT-10MM
(Durometer 85)
30mm MiniLink
DS8011-04
30mm MiniLink Chain Rod
60mm Chain Links
2.36"
60.0mm
DS 8010-60-06
60mm MiniLink - Plain
0.39"
10.0mm
60mm MiniLink Chain Assembly
DS8010-60BT-10MM
(Durometer 85)
60mm MiniLink
DS8011-60
60mm MiniLink Chain Rod
Revised Jun 2008
©2008 SpanTech
MicroSpan Transfer
®
revised 03/08
© SpanTech, LLC
Recommended Spare Parts
EXPLODED VIEW
1
5
2
6
8
3
7
4
10
9
Recommended Spare Parts List
Item
1
12
11
13
14
2
3
4
5
6
7
8
9
10
11
12
13
14

revised 03/08
© SpanTech, LLC
Part Number
DA6600-2025-A
DA6600-2021-A
DA6600-2001-A
DB6600-1704-01-P
DB6600-1710
DB6600-1710
DB6600-60T25M20
DA6600-36T25M20
DB6600-25T25M20
DS9040-2000-125
DA6600-2002-125-01
DS9170-.250-.750-01
DS4251-02
DS4251-02SS
DA4259
DS4251PL
GTM-3254-01
---
Description
4mm MicroSpan Flat Chain
4mm MicroSpan Raised Chain
6mm MicroSpan Raised Chain
Extruded Nose Bar
Idler Bushing
Tension Bushing
60T Molded Gear
36T Idler Gear Assembly
25T Molded Gear
1-1/4” dia. shaft Crescent Ring
MicroSpan Sprocket Assembly
1/4 x 1/4 x 3/4 Key
1-1/4 Bearing
1-1/4 Bearing, Stainless Steel
1-1/4 Spanlon Bushing
1-1/4” Bearing w/extended tab, Plastic
32mm I.D. Nyloil Thrust Washer
Fingers (Multi or Maxi, or NONE)
Spares Qty.
3 ft
1
1
1
1
1
1
1
2
1
1
1
2
2
1
1
Recommended Spare Parts
SELECTED DETAIL VIEWS
1
2 DB6600-1704-01-P
MicroSpan® Chain
Extruded Nose Bar
930mm width
4
DA4259
Bushing Assembly Spanlon
revised 03/08
© SpanTech, LLC
5
GTM-3254-01
G300 32mm ID
Thrust Washer
6
DA6600-2002-125-01
MicroSpan®
Sprocket Assembly
3 DB6600-1710
1-1/4 x 1 Bushing
302mm length
Finger Plate
(MultiSpan, MaxiSpan, or NONE,
as applicable)
Basic Maintenance
Consistent preventative maintenance is a necessary safety practice. When performed regularly, preventative maintenance helps
prevent damage to the conveyor and associated devices, and prevent injury to personnel. Only trained and qualified personnel
who are aware of safety hazards should perform maintenance procedures. Failure to comply could result in personal injury
and/or damage to equipment.
MicroSpan® Transfer
Preventative Maintenance Schedule
Item
Action
MicroSpan® chain
• Inspect tension of MicroSpan® chain.
If the adjustment range of the tensioner is no longer sufficient to correct the chain
tension (tensioner stroke "bottoms out"), it may be necessary to remove two (2) chain
links, then use the tensioner to set the chain tension.
Weekly
Nose bar
• Remove the MicroSpan® chain and inspect the nose bar for wear.
Monthly
Sprockets
• Inspect the MicroSpan® sprockets for wear.
Monthly
Roller chain
• Grease the roller chain on the slave drive.
Monthly
Maintenance Log form on following page may be photocopied.
revised 03/08
© SpanTech, LLC
Frequency
3-Month Preventative Maintenance Log – MicroSpan® Transfer
ACTION
MONTH:
MONTH:
MONTH:
Inspect MicroSpan® chain
tension
W
E
E
K
W
E
E
K
W
E
E
K
(WEEKLY)
1
W
E
E
K
Name / Date:
Status / Notes:
Name / Date:
Status / Notes:
2
W
E
E
K
Name / Date:
Status / Notes:
Name / Date:
Status / Notes:
W
E
E
K
Name / Date:
Status / Notes:
W
E
E
K
Name / Date:
Status / Notes:
Status / Notes:
5
W
E
E
K
W
E
E
K
Status / Notes:
Name / Date:
Status / Notes:
W
E
E
K
Name / Date:
Status / Notes:
3
Name / Date:
Status / Notes:
4
Name / Date:
1
Name / Date:
2
3
4
W
E
E
K
W
E
E
K
Status / Notes:
2
3
W
E
E
K
1
Name / Date:
W
E
E
K
Name / Date:
Status / Notes:
4
Name / Date:
Status / Notes:
5
W
E
E
K
Name / Date:
Status / Notes:
5
Inspect nose bar for wear
Name / Date:
Name / Date:
Name / Date:
(MONTHLY)
Status / Notes:
Status / Notes:
Status / Notes:
Inspect sprockets for wear
Name / Date:
Name / Date:
Name / Date:
(MONTHLY)
Status / Notes:
Status / Notes:
Status / Notes:
Grease roller chain
Name / Date:
Name / Date:
Name / Date:
(MONTHLY)
Status / Notes:
Status / Notes:
Status / Notes:
revised 03/08
© SpanTech, LLC
Powered
Roller
Transfer
revised 06/08
© SpanTech, LLC
Standard 6-Row Powered Transfer Chassis (Page 1 of 6)
NO.
PART / ASSEMBLY NO.
DESCRIPTION
15
DS9289
8 - 32 x /16 Socket Set Screw
DB6600-RC6
Slave Transfer Chassis (Right Hand - 6 Row)
DB6600-LC6
Slave Transfer Chassis (Left Hand - 6 Row)
19
DA6600-1616-S
South Coupling Assembly
20
.25 x .5 x .25
Bearing Seal
21
SR188ZZA3K25LG20
Tensioner Bearing
22
95606A120
23
DA6600-1304
Gearbox Output Shaft Assembly
24
SCE46P
Needle Bearing
18
19
3
1
/4 Nylon Thrust Washer
15
20
18
.
U.S.A
21
.
U.S.A
.
U.S.A
.
U.S.A
.
U.S.A
22
23
22
.
U.S.A
24
Revised August 2003
©2003 Span Tech
NO.
PART / ASSEMBLY NO.
DESCRIPTION
DB6600-RC6
DB6600-LC6
18
1
22
95606A120
24
SCE46P
Needle Bearing
25
DA6600-1302
Gearbox Idler Shaft Assembly
.
U. S.A
.
U. S.A
18
.
U. S.A
.
U. S.A
24
.
U. S.A
22
25
22
.
U. S.A
24
Revised August 2003
©2003 Span Tech
NO.
18
24
26
35
24
28 29
26
41
33
DB6600-LC6
SCE46P
Needle Bearing
DB6600-1001-R-6
Slave Chassis Gearbox Reservoir (Right Hand - 6 Row)
DB6600-1001-L-6
Slave Chassis Gearbox Reservoir (Left Hand - 6 Row)
Pressure Relief Breather
28
FCE10012
8 - 32 x /4 Button Head Cap Screw
1
29
DS9110
8-32 Star Washer
30
DB6600-1004
Chassis Oil Level Sight Glass
31
9452K115
Sight Glass O-Ring Seal
32
DB6500-1515-02
Bridge Saddle
33
DB6600-1641
PTO Spacer Post
34
DA6600-1640
PTO Bearing Block Assembly
35
DB6600-1640
PTO Bearing Block
38
31
1624-125001
37
30
DESCRIPTION
DB6600-RC6
27
36
27
PART / ASSEMBLY NO.
1
/8 HP
Oil Drain Plug
DB6600-1002
Chassis Spacer Post
DB6600-RT6
Slave Chassis Cover Plate (Right Hand - 6 Row)
DB6600-LT6
Slave Chassis Cover Plate (Left Hand - 6 Row)
39
DS8002
40
DS8005
41
FCE0975
Name Plate
Drive Pin
3
8 - 32 x /4 Socket Head Cap Screw
34
38
32
18
36
39
37
40
Revised August 2003
©2003 Span Tech
NO.
18
24
43
21
22
20
44
24
47
42
DB6600-LC6
Bearing Seal
21
SR188ZZA3K25LG20
Tensioner Bearing
22
95606A120
24
SCE46P
FCE10012
Needle Bearing
1
8 - 32 x /4 Button Head Cap Screw
DS9110
8-32 Star Washer
Main Slave Gear Assembly for MultiSpan
DA6600-1300-MA
Main Slave Gear Assembly for MaxiSpan
DA6600-1300
Main Slave Gear Assembly
DB6600-1201
MultiSpan Timing Pulley
DB6600-1202
MaxiSpan Timing Pulley
45
6202105EN
0.025 Trantorque
46
DB6600-1221
47
FCE1000
48
DA6600-1000
PTO Tensioner Assembly
425-5GT-15
MultiSpan PTO Slave Drive Belt
(85 tooth 5mm PGGT belt, 15mm wide)
450-5GT-15
MaxiSpan PTO Slave Drive Belt
(90 tooth 5mm PGGT belt, 15mm wide)
42
43
49
29
1
DA6600-1300-MU
44
22
.25 x .5 x .25
29
22
DESCRIPTION
DB6600-RC6
20
28
45
22
PART / ASSEMBLY NO.
PTO Pulley
1
28
49
18
48
46
Revised August 2003
©2003 Span Tech
M
a
n - Plain
Spa
Ch
lti
Rotation Plate Positions - Side View
Use these holes
for transfers mounted
to conveyors with
6mm raised chains.
52
Use these holes
for transfers mounted
to conveyors with
plain chains.
53
NO.
PART / ASSEMBLY NO.
DESCRIPTION
DB6600-RC6
DB6600-LC6
18
50
DB6500-1650
Mount Block T
51
DS9200
8mm Flat Washer
52
DS9406
53
DB6500-1520
54
DB9405
55
DB6500-1565
56
DS9403-BH
57
55
51
5
1
/16 x 1 /4 Hex Bolt
Mount Block Hole
5
/16 x 1 Hex Bolt
Mount Block Slot
5
3
/16 x /4 Button Head Bolt
DB6500-1600-R
Rotation Plate (Right Hand)
DB6500-1600-L
Rotation Plate (Left Hand)
FCE0972
58
56
50
pan - Plain C
h
xiS
ain
ain
Ch
Mu
6mm Rais
e
ain
npa
ain
Ch
Mult
iS
6mm Rais
e
d
npa
d
Max
iS
3
59
DS4039S87
Santoprene Shield
60
DS9040-2000-125
1.25 Crescent Ring
61
GTM-3254-01
Thrust Washer
62
DS4257
Wood Bearing
63
DB6500-1225
Bearing Spacer
64
DS4034PP
65
DS9383
Bearing Cap with Hole
1
/4 - 20 x 1 Flat Head Cap Screw
57
54
58
59
61
61
18
60
62
60
63
64
65
Revised August 2003
©2003 Span Tech
NO.
PART / ASSEMBLY NO.
DESCRIPTION
51
DS9200
8mm Flat Washer
66
DS4902
67
DS9361
68
66
5
5
/16 x /8 Hex Head Cap Screw
1
1
/4 - 20 x /2 Hex Head Cap Screw
DB-MU-6x16.8-P-04-P
Transfer Side Plate for MultiSpan with Plain Chain
DB-MU-6x16.8-R-04-P
Transfer Side Plate for MultiSpan with 6mm Raised Chain
DB-MA-6x16.8-P-04-P
Transfer Side Plate for MaxiSpan with Plain Chain
DB-MA-6x16.8-R-04-P
Transfer Side Plate for MaxiSpan with 6mm Raised Chain
69
DS3355
Standoff Bolt
70
DB6600-1504-XXXX
Transfer Nose Rod
71
DA6600-1880
Guard Band Assembly
51
69
67
68
71
70
Revised August 2003
©2003 Span Tech
Standard 6-Row Powered Transfer Bridge
1
NO.
PART / ASSEMBLY NO.
1
DA6600-1500-XX-XXXX
Bridge Assembly
2
DA6600-1614
Rod Block Assembly
DA6500-1500-XXXX
High Friction Bridge Rod Assembly
DA6600-1500-XXXX
Low Friction Bridge Rod Assembly
3
--
4
--
DB6600-1617-XXXX
Bridge Flatbar
6
DA6600-1616-N
North Coupling Assembly
7
DB6600-1618-XXXX
Bridge Alignment Rod
8
DB6600-1615-U
Upper Intermediate Rod Block
9
8767K21
10
3
--
--
5
2
DESCRIPTION
Rod Block Wicking Material
DB6600-1615-L-02
Lower Intermediate Rod Block
3
11
FCE0692
12
DB6600-1619
Bridge Support Rod
13
FCE1004
10 - 32 x 1 Socket Head Cap Screw
14
DS9203
15
DS9289
4 - 40 x
/8 Socket Head Cap Screw
4mm Flat Washer
8 - 32 x
3
/16 Socket Set Screw
15
8
6
9
13
7
5
11
14
10
12
Revised August 2003
©2003 Span Tech
Standard 6-Row Powered Transfer Bridge with Fingers
1
NO.
PART / ASSEMBLY NO.
1
DA6600-1500-XX-XXXX
Bridge Assembly
2
DA6600-1614
Rod Block Assembly
DA6500-1500-XXXX
High Friction Bridge Rod Assembly
DA6600-1500-XXXX
Low Friction Bridge Rod Assembly
DB6600-1507-02
MultiSpan Finger Plate
DB6600-1508-02
MaxiSpan Finger Plate
3
4
5
DB6600-1617-XXXX
Bridge Flatbar
6
DA6600-1616-N
North Coupling Assembly
7
DB6600-1618-XXXX
Bridge Alignment Rod
8
DB6600-1615-U
Upper Intermediate Rod Block
9
8767K21
10
2
3
DESCRIPTION
Rod Block Wicking Material
DB6600-1615-L-02
Lower Intermediate Rod Block
3
11
FCE0692
12
DB6600-1619
Bridge Support Rod
13
FCE1004
10 - 32 x 1 Socket Head Cap Screw
14
DS9203
15
DS9289
4 - 40 x
/8 Socket Head Cap Screw
4mm Flat Washer
8 - 32 x
3
/16 Socket Set Screw
15
8
6
4
9
13
7
5
11
14
10
12
Revised August 2003
©2003 Span Tech
Transpositor
revised 07/08
© SpanTech, LLC
Transpositor
Top Assembly
6mm MicroSpan
Plain chain
Frame Assembly
Guide Block - LLY
Extruded Nose Bar
Guide Block - Std
Revised Jun 2008
©2008 SpanTech
Transpositor
Slide Assembly
Rack
Extruded Nose Bar
Rail
Revised Jun 2008
©2008 SpanTech
Transpositor
Shafts (Drive, Idler, Slide)
Drive Shaft
Sub-Assembly
1-1/4 Plastic Bearing
Slide Shaft
Sub-Assembly
MicroSpan Sprocket
Assembly
1-1/4 Plastic Bearing
Pinion
SS Flange Bearing
Idler Shaft
SS Flange Bearing
Idler Shaft
w / long cup
Revised Jun 2008
©2008 SpanTech
Transpositor
Scraper Sub-Assembly
Scraper Bar
Revised Jun 2008
©2008 SpanTech
Guide Rails
revised 06/08
© SpanTech, LLC
Fixed Guide Rail
Splice Sleeve
Stainless Steel Backed
Flat Guide Rail
Galvanized Backed
Flat Guide Rail
Round Guide Rail
Galvanized Backed
Round Guide Rail
Nyloc Nut
Hex Head Cap Screw
Pobco Guide Rail
Nyloc Nut
2 Pc. SS
Clip
Flat Offset Guide Rail Bracket
Channel Offset Guide Rail Bracket
Revised Jun 2008
©2008 SpanTech
ST Adjustable Guide Rail Assembly
Splice Sleeve
8mm Stainless
Steel Flat Washer
Nyloc Nut
Flat Guide Rail
Galvanized Backed
Flat Guide Rail
Round Guide Rail
Galvanized Backed
Round Guide Rail
Hex Head Cap Screw
Stainless Steel
Carriage Bolt
Pobco Guide Rail
2 Pc. SS Clip
Guide Rail Top
Bracket
Stainless Steel
8mm Stainless
Steel Flat Washer
Black
Ratchet Handle
Female
Powder Coated
Stainless Steel
Guide Rail Base
Bracket
Stainless Steel
Powder Coated
Powder Coated
ST Adjustable
Guide Rail
Bracket Assembly
Revised Aug 2008
©2008 SpanTech
VG Adjustable Guide Rail Assembly
Splice Sleeve
Transition Cap Assembly
2 Pc. SS
Clip
Adjusting Rod
Flat Guide Rail
Galvanized Backed
Flat Guide Rail
Round Guide Rail
Galvanized Backed
Round Guide Rail
Stacking Ring
Lexan Standoff
Nylon Nut
Stainless Steel
Lock Washer
Bracket Base
Stainless Steel
Powder Coated
Pobco Guide Rail
Stainless Steel
Powder Coated
VG Adjustable
Guide Rail
Bracket Assembly
Revised Jun 2008
©2008 SpanTech