Marcon International, Inc.

Transcription

P.O. Box 1170, 9 NW Front Street, Suite 201
Coupeville, WA 98239 U.S.A.
Telephone (360) 678 8880
Fax (360) 678-8890
E Mail: [email protected]
http://www.marcon.com
Vessels and Barges for Sale or Charter Worldwide
November 2012
Tug Market Report
Following is a breakdown of available anchor handling coastal, ocean and harbor tugs. Separate reports available on
inland river pushboats and anchor handling tug supply vessels.
Horsepower
Under
1,000
1,000 –
2,000
2,000 –
3,000
3,000 –
4,000
4,000 –
5,000
5,000 –
6,000
6,000 7,000
7,000 –
8,000
8,000 –
9,000
Mar 1996
199
163
59
65
18
7
8
7
4
4
550
Jan 1997
178
159
83
65
19
6
9
5
5
2
532
Jan 1998
139
142
72
46
14
9
6
6
5
2
432
Jan 1999
174
143
83
81
35
10
2
5
5
1
536
Jan 2000
161
145
72
62
27
15
3
4
7
2
498
Jan 2001
138
133
81
72
34
20
5
7
8
2
500
Jan 2002
117
134
85
67
38
22
2
5
6
4
480
Jan 2003
152
176
96
71
40
21
2
4
6
5
573
Jan 2004
117
140
77
67
29
21
1
5
12
3
472
Jan 2005
117
141
71
69
28
21
1
11
9
2
470
Jan 2006
97
125
90
66
21
16
5
6
8
1
435
Jan 2007
77
114
97
68
25
10
5
4
7
0
407
Jan 2008
73
118
105
58
19
13
2
7
1
1
397
Jan 2009
73
94
95
76
29
19
6
5
2
3
402
Feb 2010
74
136
121
125
47
36
9
7
3
4
562
Feb 2011
66
111
137
142
80
47
10
15
8
5
621
May 2011
69
117
142
144
75
45
13
15
5
5
630
Aug 2011
69
119
121
132
66
46
14
23
7
4
601
Nov 2011
74
127
123
143
80
45
17
15
6
3
633
Feb 2012
75
133
132
153
81
45
14
17
7
1
658
May 2012
79
150
127
145
67
39
10
11
5
1
Aug 2012
86
166
150
153
79
42
14
12
8
1
634
711
Nov 2012 - Worldwide
91
172
161
163
86
42
16
15
8
4
758
Nov 2012 - U.S.
26
34
28
28
12
9
4
6
1
0
148
Nov 2012 - Foreign
65
138
133
135
74
33
12
9
7
4
610
Avg. Age - Worldwide
1974
1983
1988
1993
1995
1992
1993
1985
1994
1976
Avg. Age - U.S.
1965
1969
1967
1972
1975
1969
1986
1983
1981
0
Avg. Age - Foreign
1977
1986
1992
1997
1999
1999
1996
1986
1996
1976
32
62
78
83
40
29
11
13
17
14
4
12
19
15
6
3
3
5
2
2
71
28
50
59
68
34
26
8
8
15
12
308
Charter - Worldwide
Charter - U.S.
Charter - Foreign
Up Since Last Report
9,000
Plus
Total
379
Down Since Last Report
Market Overview
Of the 12,077 vessels and 3,750 barges that Marcon currently tracks, 4,600 are tugs with 758 currently officially on the
market for sale worldwide, up 6.61% since August. Of the tugs for sale, 42.30% of foreign and 90.54% of U.S.
tugboats are direct from Owners. 253 or 33.38% of the tugs worldwide, primarily foreign flagged, were built within the
last ten years, are newbuilding re-sales or currently under construction – compared to 32.63% at the last report. 63
(8.31%) are over fifty years of age and three tugs are 75 years of age or older. 16 have no age listed. The two oldest
tugs Marcon currently has listed are both 82 years old - a 1930 built triple screw tug (later rebuilt) in the Netherlands
and a 1930 built single screw tug (also rebuilt) in Sweden. I hope that I will be in as good shape when I am 82. These
“old ladies” are balanced by 55 newbuildings up to 7,000HP range scheduled for delivery through 2013.
www.marcon.com
Details believed correct, not guaranteed. Offered subject to availability.
1
Tug Boat Market Report – November 2012
The majority of tugs Marcon tracks for sale are in the U.S. with 145 tugs
officially on the market (up from 144 last report), followed by Southeast Asia
with 141 (vs. 135), 121 each in Europe (111) and the Far East (104), 75 in the
Mediterranean (74), 47 Mid East (46), 31 Caribbean (26), 17 each in Canada
(17) and where location unstated (16), 12 each in Africa (10) and Latin
America (11), Southwest Asia 11 (10) and 8 in the South Pacific (7). CAT
diesels still power most tugs for sale with machinery in 148 or 20% of the tugs
Marcon lists. This is followed by 109 Cummins, 62 EMD, 50 Niigata, 43
Yanmar, 33 Deutz, 25 each with GM and Mitsubishi, 22 Ruston and 18 MAK
powered tugs. 205 tugs are powered by machinery from other manufacturers
from ABC to Zibo with, as always, eight Fairbanks Morse boats out there
looking for a new home. Conventional single and twin screw tugs prevail with
142 (18.7%) and 461 (60.8%), respectively, for sale worldwide. These are
followed by 121 azimuthing tugs (16.0%) on the market, 26 Voith Schneider
tractor tugs (3.4%), six triple screw and two shallow draft quad screws (1.1%).
TUG ENGINE TYPES
Mitsubishi
3%
Deutz
5%
GM
3%
Ruston MAK
3%
2%
Other
28%
Yanmar
6%
Niigata
7%
EMD
8%
CAT
20%
Cummins
15%
We hit another record total of 758 tugs for sale worldwide, up 6.6% since
August of this year when 711 tugs were officially for sale – and up 19.7%
since November 2011. Several of the listings include multiple tugs and, as
in the past, there are many vessels officially on the market which we are
not familiar with, plus others not officially for sale which can be developed
for sale out of competition. All of the increase was in the overseas market
with 47 additional tugs coming available for sale and 15 for charter within
the last three months. While there have been a few U.S. flag tugs sold, a
few more came on the market leaving the number of domestic tugs for
sale flat. The greatest number of foreign flag tugs for sale are in the 1,000
– 1,999HP, 2,000-2,999 and 3,000-3,999HP ranges with about 133 – 138
available in each grouping, and all showing an increase since August. The
only horsepower range that showed a decline was 8,000 – 8,999 which dropped off one tug to seven now officially
listed for sale. U.S. flag tugs fell slightly in the under 999HP (-1), 3,000-3,999HP (-3) and 5,000-5,999HP (-1) ranges,
but four more domestic tugs in the 7,000–8,999HP range came on the market. We are continuing to see slightly more
activity in tug sales, especially with U.S. boats going foreign and expect this to continue over the next six months.
Marcon International’s year-to-date sales revenues are still down over last year, but under the circumstances I think
we are doing pretty well. Fourth quarter 2012 could end up to be our best quarter this year. 2012 has booked 29 sales
and eight charters so far and several additional sales are pending. To date this year we have sold or chartered 15 tugs
and one AHTS with a total of 56,596BHP which is an improvement over 2010 and 2011’s figures.
Actual sales price compared toBHP, as of the end of November with
sales of 23,700BHP concluded to date, is US$ 344/BHP for a “generic”
1979 built tug. The graph does not take into account the vessel’s
condition and whether azimuthing, twin screw, single screw or tractor;
but is just a simple comparison of tugs sold built 33 years ago. All eight
tugs sold in this case were twin conventional tugs sold for future
trading. None were sold for scrap. 2012’s Price/BHP of US$ 344/BHP
to date is fairly close to 2005’s US$ 339.5 for a generic tug two years
older when Marcon sold 38,101BHP in tugs. It is unlikely that we will
see any major improvement in second-hand tug prices, especially older
units, within the near future. Condition, as always, and, more than ever, location are the key factors affecting the final
sale price for second-hand tugs. It does not take much of a mobilization cost to make or break a sale in these times.
I recently talked to one owner who asked my opinion on how much should he spend on a 47 year old, 3,000BHP twin
screw tug, taking into consideration today’s sale & purchase market. After a short discussion of the numbers and the
specific tug involved, we both quickly came to the conclusion that anything spent should be dependent only on the
earning capability of the tug in his existing trade and not on any expected improvement in resale value. The tug is
regularly working and very likely to remain in that trade for a number of years. The only return on additional investment
that can be counted on will come from continued employment and not from any increase in resale value. A close eye
though will be kept on the future of the trade and her potential life span which could be another five to ten years.
www.marcon.com
2
Recent Marcon Tug Sales & Charters
Crowley Maritime’s 5,750BHP twin screw tug “Pathfinder” was sold on a
private and confidential basis. The 136.2’ x 36.5’ x 19.2’ depth tug was
originally built for Crowley in 1970 by McDermott Marine in Amelia, Louisiana.
She is powered by a pair of EMD 16-645E5s developing a total of 5,750BHP
with Falk 4.536 gears and 5-blade stainless props. Tug is fitted with a Markey
TDSDW 36C double drum tow winch and hydraulic pins. “Pathfinder” was laid
up in Puget Sound at the time of sale. Marcon acted as sole broker in the
transaction and has represented both buyer and seller in multiple sales and
purchases over the years.
The twin screw tug “King Philip” has been sold to Latin American
interests on a private basis. The 96.0’ x 34.0’ x 17.9’ tug was the third
tug built by its former Owner, family-run Seaboats, Inc., at their
shipyard facility in Fall River, Massachusetts in 1996 for their in-house
use. “King Philip”, designed by Jonathan Laiby of Woods Hole, is
powered by a pair of CAT D399 turbo-charged diesels developing a
total of 2,250BHP at 1,225RPM through Reintjes 5.976 gears to fixed
pitch props. Towing gear consists of a single drum Almon Johnson,
GM4-71 diesel powered winch with approximately 2,000’ of 2” wire and
a stern roller. The ABS loadlined tug is fitted with an upper pilot house
and well suited for pushing in the notch, as well as coastal and ocean
towing. Vessel was reflagged to foreign registry.
2,900BHP twin screw tug sold on private and confidential basis.
TradeWinds Towing of New Orleans has taken the twin screw tug “Leslie Foss”
(ex-Caribe Pioneer, Leslie Foss) on bareboat charter from Foss Maritime of
Seattle, Washington. The U.S. flag, 120’ x 31’ x 14.9’ tug was built in 1970 as one
of four similar tugs constructed at McDermott Shipyard in Amelia, Louisiana for
Foss. During her 32 years working for Foss, she has worked not only in the
Pacific Northwest and Alaska, but as far afield as Talara, Peru; Attu, Adak and
Shemya in the Aleutian Islands; the Caribbean; U.S. East Coast and the Great
Lakes towing construction, derrick, accommodations, cement and oil barges.
“Leslie Foss” is powered by a pair of EMD 12-645E2 diesel totaling 3,000BHP,
turning 103” x 82” 5-blade propellers which gives her 37.5 tons of bollard pull and
a free running speed of 12kn. Ship’s power is supplied by two 99kW and one
75kW gensets, all powered by John Deere 6068 diesel engines. With 96,000 gallons of fuel capacity she has the long
legs required for ocean towing. Towing gear consists of a
Markey TDSD-32 double drum winch, stern roller and tow
pins. Charterers plan to employ the tug on various
coastwise and ocean towing projects in the U.S. Gulf of
Mexico and have already committed her on the first tow
under their operation. This is the second sale that Marcon
has been fortunate to work on with the Buyer. Marcon has
been involved with about a dozen transactions with the
seller over the years. Marcon acted as sole broker.
Two late 2011 / 2012 built, 4,900BHP ASD escort tugs
have been chartered on a private and confidential basis for coastal and harbor towing in Central America. The 65 ton
bollard pull Z-peller tugs, only recently placed into service, are fitted with 30T at 10m/min line pull bow and stern
winches, stern roller, tugger winch, 2T knuckle boom crane and FiFi-1 with waterspray. Marcon represented the
Owners in this transaction.
2012 has booked 29 sales and eight charters as of the end of November including 15 tugs totalling 51,144BHP. Four
ocean deck barges and three inland deck barges with aggregate deadweight capacities of 26,000 and 6,800 tons
respectively have also been sold. One two year old 5,150BHP AHTS was also fixed on a six month charter. We have
several additional sales pending and expected to close within the next two to three weeks.
www.marcon.com
3
Once Again – Yet Another Record Number of Tugs Worldwide
Once again the worldwide number of tugs hit another record - even in today’s economy. While information in IHS
Fairplay Sea-web only covers “sea-going” vessels over 100GRT, there are many tugs either under that tonnage or in
inland service. According to Sea-web, as of November 6th, 2012, there were 15,490 “sea-going” tugs over 100GRT
worldwide, up from 14,805 in November 2011, and up 207 vessels from last August’s report. Total horsepower is
40,727,371BHP, up 615,595BHP since August. Even taking into account flags of convenience, the largest national
fleet of tugs over 100GRT sails under Indonesian flag, which has just overtaken the U.S. for first place in horsepower.
The U.S. operates 1,450 “sea-going” tugs over 100GRT, or 9.36% of the world market, totaling 4,768,428BHP
(11.71% global BHP). Average age of tugs worldwide is 21 years with the U.S. flag “sea-going” fleet now at 33 years
(built 1979).
Top 50 “Sea-Going” Tug Fleets By Units As Of November 2012 According to HIS Fairplay Sea-web
Flag
Worldwide
Indonesia
United States Of America
Unknown
Japan
Singapore
Korea, South
Malaysia
Panama
India
Russia
Italy
United Kingdom
Australia
China, People's Republic Of
Canada
Brazil
St Vincent & The Grenadines
Iran
Turkey
United Arab Emirates
Spain
Philippines
Mexico
Netherlands
Venezuela
Egypt
Saudi Arabia
Ukraine
Greece
France
Vietnam
Thailand
Chinese Taipei
Germany
Norway
Nigeria
Bahrain
Cyprus
Chile
Honduras
Algeria
Colombia
Argentina
Malta
Portugal
Finland
Libya
Belgium
Sweden
Kuwait
TotalBHP
40,727,371
5,010,750
4,768,428
1,425,736
2,453,698
1,894,175
1,319,954
940,913
1,302,963
1,062,684
991,594
1,010,531
791,493
860,998
758,689
623,350
640,176
651,175
410,145
494,602
517,033
604,577
336,710
522,936
553,528
422,129
441,135
450,984
228,411
205,826
378,582
198,113
256,432
241,172
321,618
238,320
163,760
224,662
260,424
250,693
124,181
237,818
183,908
163,380
288,552
126,242
146,880
138,975
213,401
134,985
203,692
%
100.00
%
12.30%
11.71%
3.50%
6.02%
4.65%
3.24%
2.31%
3.20%
2.61%
2.43%
2.48%
1.94%
2.11%
1.86%
1.53%
1.57%
1.60%
1.01%
1.21%
1.27%
1.48%
0.83%
1.28%
1.36%
1.04%
1.08%
1.11%
0.56%
0.51%
0.93%
0.49%
0.63%
0.59%
0.79%
0.59%
0.40%
0.55%
0.64%
0.62%
0.30%
0.58%
0.45%
0.40%
0.71%
0.31%
0.36%
0.34%
0.52%
0.33%
0.50%
# Tugs
15,490
3,078
1,450
821
764
668
476
462
430
398
371
322
252
250
219
217
199
189
185
178
178
172
163
157
152
151
148
145
117
113
107
102
100
93
85
84
78
75
73
69
65
64
60
59
56
56
55
53
51
51
50
%
100.00
%
19.87%
9.36%
5.30%
4.93%
4.31%
3.07%
2.98%
2.78%
2.57%
2.40%
2.08%
1.63%
1.61%
1.41%
1.40%
1.28%
1.22%
1.19%
1.15%
1.15%
1.11%
1.05%
1.01%
0.98%
0.97%
0.96%
0.94%
0.76%
0.73%
0.69%
0.66%
0.65%
0.60%
0.55%
0.54%
0.50%
0.48%
0.47%
0.45%
0.42%
0.41%
0.39%
0.38%
0.36%
0.36%
0.36%
0.34%
0.33%
0.33%
0.32%
Avg BHP
2,629
1,628
3,289
1,737
3,212
2,836
2,773
2,037
3,030
2,670
2,673
3,138
3,141
3,444
3,464
2,873
3,217
3,445
2,217
2,779
2,905
3,515
2,066
3,331
3,642
2,796
2,981
3,110
1,952
1,821
3,538
1,942
2,564
2,593
3,784
2,837
2,099
2,995
3,567
3,633
1,910
3,716
3,065
2,769
5,153
2,254
2,671
2,622
4,184
2,647
4,074
www.marcon.com
Avg Age
1991
2001
1979
1978
1996
2006
1989
2002
1989
1995
1987
1985
1990
1995
1992
1975
2001
2000
1989
1991
1996
1992
1977
1986
1999
1986
1988
1990
1983
1973
1992
1996
1984
1987
1989
1979
1986
1991
2001
1999
1968
1990
1997
1980
2002
1979
1970
1990
1999
1965
1996
4
I keep expecting to see total global fleet numbers starting to decline
instead of hitting a record every new market report. Maybe I need a little
more patience. At the time of our November 2010 report, the average
horsepower for the world’s 14,430 “sea-going” tugs was 2,633BHP with an
average year built of 1990. Today’s average of 15,490 tugs is 2,629BHP
with a year built of 1991. The U.S. fleet in November 2010 included 1,514
“sea-going” tugs with an average of 3,194BHP and year built of 1978.
Today’s U.S. fleet did decline 4.2% to 1,450 tugs, average horsepower
increased to 3,289BHP – mostly ATBs and ASDs; and average year built
is 1979 vs. 1978, but that still makes the U.S. fleet one more year older.
Marcon is trying to do our part – five of eighteen tugs we sold during 2011
and 2012 were U.S. tugs averaging 36 years old that went overseas.
Breakdown of U.S. “Sea-Going” Fleet
Following is a breakdown of the U.S. sea-going tug fleet as of November 2012,
according to IHS Fairplay Sea-web, compared with last quarter. As of August
2012, the U.S. domestic tug fleet consisted of 1,469 “sea-going” tugs totaling
4,847,030HP. The U.S. flag fleet decreased by 19 tugs to 1,450 while total
horsepower fell by 78,602BHP to 4,768,428HP- reflecting recent sales of a
number of 5,750-7,200HP 1970s built tugs overseas to West Africa plus to
domestic operators for foreign service. High horsepower and large tugs are
easy to track, but Sea-web has data on only 52 U.S. tugs under 999BHP. As
most of the “under thousand horsepower” tugs in the U.S. are below 100 gross
register tons, they are generally not included in the Registry. Not counting
pushboats, there are eight to nine hundred additional small tugs in U.S.
coastal waters. As of Spring 2012, there were 7,159 “towboats” (both tugs &
inland river pushboats) in the U.S. Approx. half were under 100GRT. Inland river pushboats do not meet IHSF criteria
and therefore are also not included in Sea-Web.
U.S. Sea-Going Tug Fleet Over 100GRT ByBHP According to Lloyd’s Register as of November 2012
Total #
AvgBHP
Avg LOA
Avg Beam
Avg Depth
Avg Year Built
UnknownBHP
124
89
28
12
1974
Under
999
52
789
80
23
9
1952
10001999
271
1,504
87
26
11
1966
20002999
221
2,356
97
29
13
1975
30003999
269
3,416
106
32
15
1980
40004999
244
4,358
106
34
15
1992
50005999
97
5,446
115
36
17
1990
60006999
69
6,412
113
38
18
1999
70007999
52
7,153
137
39
20
1983
80008999
10
8,066
133
41
20
1996
9000 Plus
41
11,223
141
47
24
2004
Total
1,450
Previous U.S. Sea-Going Tug Fleet Over 100GRT According to Lloyd’s Register as of August 2012
UnknownBHP
Total #
131
AvgBHP
Under
999
10001999
20002999
30003999
40004999
50005999
60006999
70007999
80008999
9000 Plus
54
274
223
272
243
97
65
54
10
46
788
1,501
2,360
3,412
4,358
5,446
6,401
7,160
8,066
11,643
Avg LOA
91
81
87
97
106
106
116
113
138
137
140
Avg Beam
28
23
26
29
32
34
36
38
39
42
48
Avg Depth
12
9
11
13
15
15
17
18
20
20
24
1974
1951
1965
1975
1979
1991
1989
1999
1983
1996
2003
Avg Year Built
Total
1,469
Of the 1,450 U.S. flag tugs in Lloyd’s as of November, 205 have unknown engines. 466
or 37% where type is known are powered by EMDs, 381 (31%) by CATs, 126 (10%) by
General Motors / Detroit Diesels and Cummins and Alco are tied with 4% market share
each. Of 1,450 U.S. flag tugs, 394 (27%) and 773 (53%) are conventional single screw
and twin screw, respectively. The remaining 20% of U.S. flag tugs are 223 azimuthing, 37
triple screw and 23 Voith-Schneider tractor tugs. Two years ago, 33% of U.S. tugs were
powered by EMDs, 30% by CATs, 17% by General Motors / Detroit Diesels and 4% still
by Fairbank Morse. 30% and 52% of U.S. tugs were conventional single and twin screw
respectively with the remaining 18% consisting of 196 azimuthing, 38 triple screw and 23
tractor tugs. There are 65 fewer single screw and 27 more ASD tugs in the fleet today
than two years ago.
www.marcon.com
5
New Construction, Shipyard and Conversion News
According to “Fairplay Newbuildings”, as of 6th November 2012,
there were 6,628 ships over 299GRT on the World Orderbook,
down 139 or about 2.06% from 6,767 ships in August, and
showing a further decline from 7,956 newbuildings one year ago.
This is the lowest number of ships on the World Orderbook since
Marcon started tracking newbuildings over five years ago. Many
shipbuilders are idle as orders, especially for larger vessels,
continue their steep decline as supply outstrips demand. Some
overseas shipyards have not seen a single order this year and
2013 does not look very good for big ship orders. Many yards will
not survive. In contrast, of the total number on today’s orderbook,
547, or 8.25% are tugs or “towing / pushing” vessels, up five from 542 in August. This is, of course, down from a peak
of 643 in August 2011, but still healthy. 712 of today’s newbuildings, up
13 from our last report, are OSVs and 259, up 32, are “Offshore –
Other”. Of 547 tugs listed by Fairplay under construction, Malaysia
leads the order book with 150 tugs being built, down 5 from August.
They are followed by China PR at 91 (up 3) tugs, Indonesia 36,
Romania 29, Vietnam 28, 27 Turkey, Spain 23, Egypt 21, 15 Japan,
USA 14, 13 each in India, Poland and Singapore, 12 Russia, Brazil 9, 8
each Iran and Qatar, the Netherlands and Peru 5 each, 4 South Korea,
3 each Cuba, UAE and Ukraine, Chile, Serbia Thailand and Venezuela
2 each and 1 each in Azerbaijan, Belgium, Canada, Colombia, Libya
and South Africa. Of 547
tugs being built, abt. 55.6%
are to be delivered in 2012, 38.4% in 2013 and 6.0% during 2014.These
figures though do not cover all tugs, towboats and pushers actually under
construction. Many ordered by government agencies or navies such as tugs
built by Pella or other Russian yards for the Russian Navy, or domestic
internal trade vs. export in China never show up on the World Orderbook. I
would not be surprised to see one hundred and fifty or more tugs added to
the orderbook each year If they were included – and this would still exclude
the inland river towboats or pushboats operating on the Mississippi River
system in the United States and other internal waterways across the world.
U.S. shipyards are seeing more activity than many overseas yards and doing much better than after the 1980s’
downturn when commercial construction plummeted to almost zero by 1986. As of 20th November, MarineLog and Tim
Colton U.S. Shipbuilding Contracts tallied 343 vessels and barges on order, excluding inland barges and recreational
vessels. Approx. 60% vessels and barges are being built for commercial operators. There are also others that we
know of that do not show up on the list. One of our friends in the U.S. Gulf, whose facility adjoins a local shipyard,
commented that this time last year one of his workers could lie down and take a nap in the middle of the road leading
up to the yard. Now with the increased traffic and employees going and coming, the yard had to install a stop light and
build a new parking lot. We also are discussing more newbuilding options with various yards in the U.S. and abroad.
CAT power still leads in popularity for propulsion in new sea-going tugs with
main engines in 146 tugs. This is followed by Yanmar in 93 boats, Cummins
in 58, Niigata diesels in 38, 28 Wartsila, 24 Mitsubishi, 20 General Electric,
MTU 10, 9 Chinese Standard Type, 5 Daewoo, 4 each ABC and Daihatsu, 2
each Deutz, MAN/MAN-B&W and MWM and 1 each with Baudouin, Iveco
Aifo, John Deere, MaK, Volvo Penta and Weifang. Engines were not listed for
96 tugs. Only 56 tugs below 1,000BHP are shown under construction
because, as discussed earlier, many tugs of lower horsepower are under
299GRT.
Summary of Horsepower – Fairplay Worldwide Tug Orderbook Over 299GRT
Tugs
Under
1,000 –
2,000-
3,000-
4,000-
5,000-
6,000-
7,000-
8,000-
9,000-
Over
1,000HP
1,999HP
2,999HP
3,999HP
4,999HP
5,999HP
6,999HP
7,999HP
8,999HP
9,999HP
10,000HP
56
105
75
126
13
22
2
0
5
0
5
www.marcon.com
Unk.
Total
138
547
6
On 12th September, Bollinger Marine Fabricators of Amelia, Louisiana
delivered the “Ocean Wave”, the first of four “Ocean” class tugs, to Crowley
Maritime Corporation. “We are extremely proud of our Ocean Class team and
the delivery of the first in class tug, ‘Ocean Wave’”, said Chris Bollinger,
executive VP of Bollinger Shipyards. “Our partner, Crowley and Jensen, as well
as our numerous vendors, have worked hard to develop and deliver a premier
vessel into the International marine market and we look forward to future
deliveries of sister ‘Ocean Wind’ and DP2 vessels ‘Ocean Sky’ and ‘Ocean
Sun’.” “Ocean Wave” is the first of the Ocean class tugs and is first of two
10,880BHP tugs that feature DP1 capabilities. The twin screw tug is fitted with
controllable pitch propellers in nozzles with independent high lift rudders. The
hull is outfitted for long range ocean towing, dynamic positioning, firefighting,
rescue and salvage towing, as well anchor handling. She is designed and outfitted with all tanks containing oil and oil
traces inboard of the side shell to create a double hull and designed for zero discharge of any machinery cooling
water, gray or black water, further safeguarding the environment. “Taking delivery of this first ocean-class tug is a
significant milestone for Crowley and our customers who will benefit from its use on their projects,” said Tom Crowley,
company chairman, president and CEO. “These Jensen Maritime-designed towing vessels – three of which are under
construction at Bollinger – are a new generation of powerful, high-tech and environmentally friendly workhorses for
Crowley that will further solidify our standing as an industry leader in ocean towing, salvage and offshore marine
support for the upstream energy industry.” Propulsion for “Ocean Wave” is provided by two Caterpillar C-280-12 Tier II
diesel engines, designed to operate on Ultra Low Sulfur Diesel fuel and each is rated at 5,440BHP at 1,000RPM,
driving 153.5” CP props through Reintjes LAF 5666 reduction gears. Bow thruster is a Berg 850HP unit. Electric power
is provided by two 1,475KVA shaft, one 340kW CAT C-18 Tier II auxiliary harbor, and one 125kW CAT C-6.6 Tier II
emergency generators. Towing and deck equipment features an Intercon – DW275 hydraulic winch with upper drum
capacity for 3,000’ of 2.5” wire and lower drum with 4,200’ of 2.75” wire, Triplex tow pins, Triplex shark jaws and an
open stern roller. Tug complies with all applicable rules and regulations for unrestricted ocean towing, International
Load Line, SOLAS and ABS DP1, Green Passport classification.
Shortly after her delivery from the yard, “Ocean Wave” performed her
inaugural job in Cuba working with Crowley’s subsidiary Titan Salvage
by removing a grounded 1993 built, Liberian-flagged containership from
the northern coast. The project’s success hinged on a coordinated and
timely response from Antilliana De Salvemento, the Cuban salvage
company which subcontracted Titan Salvage, Crowley’s Pompano,
Florida-based emergency response, marine salvage and wreck
removal company, and Houston-based T&T Marine Salvage, to assist
with removal of the stricken 12,582dwt containership “Hansa Berlin”
(ex-P&O Nedlloyd Orinoco). The 1,016TEU containership was en route
from Santiago de Cuba to Havana, Cuba, when the 149.5m x 22.6m x 11.1m depth ship came ashore 20 miles west of
Havana after losing power during Tropical Storm Isaac on 26th August. Following the grounding, Titan’s salvage
master was on scene in less than 24 hours, Crowley’s government services team worked with U.S. and Cuban
authorities to complete all necessary Customs documentation in advance, and the solutions team readied “Ocean
Wave” for the 48-hour transit from Orange, Texas, to the site. The stricken vessel, towed by “Ocean Wave”, was
successfully removed from the coastline and delivered to port in Havana, Cuba, in early October. “This successful
project is testament to the power of Crowley’s total
capabilities,” said the company’s Todd Busch, senior VP
and general manager, technical services. “We leveraged
many of our unique company assets – such as the ‘Ocean
Wave’ – our collective experience, and our long-standing
relationships with the Cuban authorities and Antilliana De
Salvemento to complete a challenging job quickly in a
location where many others would be unable to work. Not
only were we able to work as a team, but we performed the
job quickly and without harm to the environment or any
people. It was an excellent example of what Crowley can
do in emergency response situations, in some of the most challenging locations in the world.” All 19 of “Hansa Berlin’s”
crew were safely taken off the vessel by helicopter and although abt. 174,000 gallons fuel oil and 27,500g diesel were
on board at the time of grounding, German owners Hansa Treuhand GmbH & Co. KG reported that bunkers were
removed and no pollution occurred.
www.marcon.com
7
Damen Shipyards launched its first ever hybrid tug - the ASD Tug 2810 Hybrid - and is
proud to announce that Iskes Towage & Salvage will be the customer. The signing
ceremony took place on 23rd October, at Offshore Energy in Amsterdam. Damen is
believed to be the only yard worldwide building hybrid tugs for stock at this time. The
second hybrid vessel will be available from stock end-2013. Depending on the operating
profile of a tug, the ASD 2810 Hybrid, which has a combination of diesel-direct and dieselelectric propulsion, facilitates average fuel savings of between 10% and 30% and cuts
local emissions by 20 to 60%. The vessel has a bollard pull of 60 tons.
Originally established in 1928 to tow inland barges with coal through the locks to a local steel plant, Iskes, based in
Ijmuiden near Amsterdam, has been operating a conventional Damen ASD Tug 2810 since November 2011. Iskes
owner and Managing Director Jim Iskes says: “We already had a very good experience with our existing Damen ASD
Tug 2810, which is ideally suited to Amsterdam. We are very happy with its performance and so are the crew; it was a
logical move to choose Damen for the Hybrid version. Damen welcomed our input and recognizes that we know what
we are talking about. Many of the things we require are not standard but Damen has worked with us to incorporate
them.” Erik van Schaik, Design & Proposal Engineer, Damen Tugs says: “In the past many green solutions were
simply too expensive for the tugboat market. We were very mindful that this
vessel had to cut fuel and emissions, but at the same time it had to be
positioned at an attractive price for the market. We wanted to make being
green commercially attractive too.” And indeed, he adds, fuel costs are not
getting any cheaper, so Iskes is making considerable fuel savings as well. “The
investment in the Hybrid version is higher but not excessively so. The Hybrid
represents an extra investment of approximately 10% more than the regular
ASD Tug 2810”, stresses Mr. Van Schaik. Iskes had been working on its own
green solution together with Offshore Ship Designers, looking into the potential
of a hydrogen hybrid tug. Earlier this year, the three-year E3-project was
completed whereby Damen and its partners had monitored a conventional ASD
Tug 2810 operating in the port of Rotterdam. The partners wanted to gather
data on a typical harbor tug profile and see what was possible in terms of
emissions and fuel cuts. During the monitoring campaign the E3 team found that the average load profile showed that
tugs are running inefficiently for most of the time. For up to 80% of the day they can be free sailing, station keeping,
running idle essentially, and in turn, this makes them less environmentally friendly and leads to higher operational
costs. The diesel electric propulsion system in the ASD Tug 2810 Hybrid delivers enough power to prevent the main
engines of the diesel direct propulsion system from running idle frequently or at low loads. During the E3 project
Damen’s Research Department made a computer simulation model to analyze various propulsion trains. Damen can
use this simulation model to calculate the exact savings that are possible from the Hybrid in each individual case,
based on the tug’s operating profile and running hours. Based on the findings and after looking at various battery,
LNG, hydrogen and compressed natural gas solutions, the Hybrid emerged. NOx, HC, CO, SOx, CO2 and particles all
decrease substantially, as does fuel consumption.
As an option, Damen is also offering a battery pack whereby it is possible
to shut down all the engines during station keeping, maneuvering and free
sailing at low speeds, making the vessel even more environmentally
friendly. Battery packs of 100kWh each are likely to be provided, which
allow the vessel to sail up to 5 knots. The Iskes Hybrid will be
incorporating batteries. Mr. Iskes stressed that the company was very
keen to have a combination of the diesel electric and batteries. “A
100kWh battery allows the vessel to be alongside the quay for eight hours
and sail for an hour. And this represents a 10 to 15% fuel saving.
Batteries make it much more comfortable for the crew because when they
are asleep, energy is coming from the batteries so there is no noise or
emissions.” Solar panels are added to the deckhouse on the Damen
standard version and these are used to charge the 24V battery packs for starting the engines and emergency power
for navigation lighting and radio equipment. Other green initiatives on the vessel include LED lighting, and a special
paint coating, making the vessel more environmentally friendly and clean for at least five years.
www.marcon.com
8
Customization of the Iskes ASD Tug 2810 Hybrid for anchor handling includes
double drum winches fore and aft, wooden decks and an open stern with towing pins
and chain stopper forks. Damen wanted to use tried and tested technology for the
ASD Tug 2810 Hybrid. One additional clutch has been added to the vessel and a
230kW water-cooled electric propulsion engine between each main engine and the
rudder propeller. A fire-fighting/generator set is installed to feed the electric
propulsion engines or to drive the 1,200m3/hr FiFi pump. The generator/fire-fighting
set engine is fitted with an exhaust gas after-treatment system consisting of a
Selective Catalytic Reduction (SCR) system, a Diesel Oxidation Catalyst (DOC) and
a half open, Diesel Particulate Filter (DPF). The fire-fighting/generator set engine
can deliver 695kW at 1,800RPM and is fully compliant with the IMO Tier 3
regulations being introduced in 2016. Iskes says that the operator expects to be
utilizing the IMO Tier 3 compliant engine 90% of the time. Each main engine has a maximum power of 1,840kW at
1,600RPM and is IMO Tier 2 compliant. The captain can choose one of the following operating modes from the
wheelhouse and then the Hybrid Control Unit manages everything automatically. Stand-by mode (only in combination
with optional battery pack): All diesel engines will shut down and the battery pack feeds the normal electric system and
electric propulsion engines that drive the rudder props. When the battery pack becomes empty the system will switch
to free sailing mode automatically and the battery pack will be charged. The stand-by mode can be used for station
keeping, maneuvering and free sailing at speeds of up to 5 knots. Free sailing mode: The generator/fire-fighting set
starts and feeds the electric propulsion engines that drive the rudder props. The main engines are not running and the
auxiliary generator set feeds the normal electric system. The free sailing mode can be used for station keeping,
maneuvering and free sailing at speeds of up to 8 knots. Towing mode: Main engines start and drive the rudder
props. The generator/firefighting set is not running and the auxiliary generator set is feeds the normal electric system.
The towing mode has to be used during push/pull operations and free sailing of up to 13 knots. Fire-fighting mode:
The fire-fighting mode has to be used during fire-fighting operations. Main engines start and drive the rudder props.
Generator/firefighting set starts and drives the fire-fighting pump. The auxiliary generator set is feeds the normal
electric system.
Damen Shipyards Group also has signed a contract with Svitzer
Middle East for delivery of two Damen Stan Tugs 1606. Svitzer
is in need for both tugs due to a recent charter contract with
Danish stevedoring giant APM Terminals for tugboat services in
the new Khalifa Bin Salman Port in Bahrain. The STu 1606 is a
standard designed 16.76m long tug with a bollard pull of 16 tons.
Damen will deliver the tugs on short notice “from stock” from the
yard in Changde, China. The contract was signed by Mr. Lars
Seistrup, Chief Operating Officer of Svitzer Middle East, and Mr. Bram Langeveld, Sales Manager Middle East of
Damen Shipyards Group…… Damen is supplying Acta Marine with four Shoalbuster anchor handling tugs. Three of
the anchor handling tugs will be supplied from Damen Marine Services’
charter fleet, while Damen Shipyards Hardinxveld will be supplying the
fourth, a new Shoalbuster, in March 2013. “Shoalbusters are excellent
multi-purpose vessels that we will be able to use all over the world in
dredging and marine contracting projects, as well as for oil and gas
projects and offshore wind projects”, says Govert-Jan van Oord,
managing director of Acta Marine. The 26.0m x 9.1m x 3.6m depth “DMS
Eagle” and “DMS Globe”, built in 2006 and 2004 respectively, are
Shoalbuster 2609s that will be deployed in the Persian Gulf as they were
before. The 30.08m x 9.10m x 4.40m depth “DMS Dunnock”, built in 2007, and the new ships are larger, 3,300HP units
powered by CAT 3512Bs and have bollard pulls of 45-50 tons. These latter two vessels are the sister ships of the
2010 built, 32.27m x 9.10m “Coastal Vanguard”, which Acta Marine
purchased from Damen at the end of 2010. The “DMS Dunnock” will be
transferred in Singapore in January 2013, putting the ship in an
excellent location to take on charter assignments in Southeast Asia and
Australia. The new Shoalbuster is currently under construction in the
Netherlands and will be delivered in March 2013. All Shoalbusters are
built by Damen Shipyards Hardinxveld.
www.marcon.com
9
On 5th September, Damen Shipyards Group and Smit Lamnalco signed a contract
for two newly designed ASD Tugs 3212 and a Stan Tug 2208. The signing
ceremony took place at the Damen stand at the SMM exhibition in Hamburg
(Germany). The Stan Tug 2208 were scheduled to be delivered mid-September
from the stock of Damen Shipyards Cape Town. The two ASD 3212s were
scheduled to be delivered in the first week of October and the early November by
Damen Shipyards Galati. Smit Lamnalco plans to use the vessels for contracts in
Iraq and Sierra Leone. In October 2012, the powerful 32.7m x 12.8m x 5.4m depth
Damen ASD 3212 tug named “SL Tiger” was delivered to Smit Lamnalco after
successful completion of sea trials in Romania. The handing over took place at the building yard Damen Shipyards
Galati and following the maiden voyage of this new Smit Lamnalco fleet
addition, the tug will commence SMB terminal operations in Iraq. “SL Tiger” is
powered by a pair of CAT 3516C HDs developing a total of 5,050bkW
(6,772BHP) at 1,800RPM with Rolls Royce US255CP 2,800RPM props. Towing
gear consists of a 200 ton hydraulic two speed double drum anchor / renderingrecovery winch, 5T electric capstan and a Mampaey 100T SWL tow hook. “SL
Tiger” is fitted with two main engine driven 1,200m3/h fire pumps and two
1,200m3/h water or 300m3/h foam monitors. Tug is classed LR +100A1 Escort
Tug +LMC UMS EP, FiFi 1. Accommodations are provided for 10 persons in six
cabins.
Damen Shipyards Group and Wilson Sons (Brazil) signed a contract for ten Damen
ASD Tugs 2411 and two ASD Tugs of the new 3212-type, destined for the booming
Brazilian market. Vessels will be built at the Wilson Sons Estaleiros in Guarujá, São
Paulo, Brazil and will go into service for Wilson Sons subsidiary Saveiros
Camuyrano Serviços Maritimos. Wilson Sons has one of the biggest tug fleets in
Latin America, serving all Brazilian waters both in harbors, inshore and at sea. Its
fleet consists of approx. 75 tugs of which at least 50 tugs are azimuthing stern drives,
most of which are Damen designs. The two companies have achieved a high level of
cooperation: Wilson Sons builds locally, using drawing, engineering and materials packages provided by Damen and
achieving the same high standards which have made Damen a market leader in harbor tugs. Of the ten 24.47m x
11.33m, ASD 2411s in this contract, five will have a 55 ton bollard pull and five will have 70 ton pull. Wilson Sons is no
stranger to this vessel, as they already have 19 in their fleet, used mainly in harbor ops
and in restricted, inshore conditions. The new 2411s, however, comply with latest IMO
and MLC 2006 crew accommodation and comfort regulations. The two 32.70m x 12.82m,
Damen ASD 3212s will be a new departure. This brand new tug type was introduced at
the International Tug & Salvage Convention in Barcelona in June 2012. It is specially
designed for working in challenging conditions and to have a wider range than regular
tugs: ideal for salvage in exposed locations and for operations related to Brazil’s offshore
oil industry. The ASD 3212 has a powerful 80 ton bollard pull and a host of new features,
such as extra-thick “double sausage” fendering for improved energy absorption and a
high bow to keep the foredeck dry. Damen has co-operated with the Dutch MARIN
institute and Delft University of Technology to further improve hull form, bilge keels and
skeg shape, resulting in a vessel that can work in 3m wave height. Maneuverability and
crew comfort have also been addressed and the ASD 3212 complies with all major
Class Societies’ requirements and latest international environmental regulations. Damen
will send the first construction packages for these tugs to Brazil in January 2013. Wilson
Sons expect to have built all twelve by the end of 2015. With total investment of $150
million approved by the Merchant Marine Fund in November last year, Wilson Sons
Rebocadores / Saveiros Camuyrano Servicos is building the azimuthing tugs
for local port and maritime support. In 2012, Wilson Sons Rebocadores started
operating the two 24.6m x 11.7m x 4.6m depth Damen ASD 2411 tugboats –
“Pictor” (Hull No. 120) in January, and “Hamal” (Hull No. 121) in May. Two
additional new tugs are scheduled to be delivered before the end of this year.
“Telescopium” is expected to be launched in October and “Delphinus” (Hull No.
122) in December.
www.marcon.com
10
In September, the two ASD 2810 tugs “Virgen Del Valle” and “Arcangel San Miguel”
sailed from Vietnam to Panama, to be a delivered to MMG Shipping Group / Meyer’s
Group S.A. Both were built at the Damen Song Cam Shipyard in Haiphong. The 28.7 x
10.4m tugs have twin 1,864bkW CAT 3516C TA HD/Cs developing a total of 5,000BHP
to Rolls Royce US 205 azimuthing drives. Deck gear consists of a 150 ton brake
hydraulic two speed winch with split drum forward, Heila 2.2T hydraulic crane and two
speed 150 ton brake tow winch aft. The Panamanian-flagged “Virgen Del Valle” and
“Arcangel San Miguel” are classed LR +100A1 Tug, FiFi 1 (2,400m3/h), +LMC UMS.
Accommodations are provided for six persons in four cabins……Kotug International is
putting two new Damen ATD 2412 azimuthing tractor drive tugs into operation in the
German port of Hamburg. These tugs were ordered by Elisabeth Ltd. of Malta and being
chartered by the Kotug Group. Recently Kotug started towage activities in the new German
deep sea port Wilhelmshaven. Due to growth in German ports and increased size of
vessels, Kotug needed additional tugs on short notice. Damen’s short delivery time and
quality were key factors in choosing the compact Azimuth Tractor Drive tugs “ZP Bulldog”
and “ZP Boxer”. Damen arranged transport from Vietnam, where they were built at the Song
Thu Co. shipyard in Da Nang, to Rotterdam, where they handed over the tugs in
November in a turnkey operation. After arrival, the tugs were painted in Kotug’s
red colors, equipped and prepared to commence towage activities in Hamburg,
around 12th November. The Germanischer Lloyds class tugs have a length of
24.85m, width of 12.63m, depth of 4.60m and max draft of 6.45m. A pair of
2,100bkW CAT 3516TA HDs with Rolls Royce US 255 forward mounted
azimuthing drives develop a total of 5,600BHP and bollard pull of 70 tons.
Towing gear consists of a single split drum tow winch aft with a capacity of two
200m Ultralines.……On Friday 28th September, the solemn ceremony of raising
the flag of the Russian Federation and sanctification of the “Kuzbass” (Yard No. 511586), a Damen ASD Tug 2810,
took place in Vostochny, near Vladivostok. This is the first Damen vessel for Vostochny Port JSC, the largest
stevedoring company in the Russian Far East, specializing mainly on coal handling using conveyer equipment. The
tug will start operations in early November 2012, when the stevedore will have all necessary approvals and licenses.
Tug was built at Damen's Chinese shipyard in Changde and arrived in the
port of Vostochny, Primorsky Territory on 4th September. Vostochny Port is
considering purchase of additional Damen vessels of this type. The 28.67m
x 9.80m x 4.60m depth tug is powered by a pair of 1,825bkW CAT 3516HD
diesels developing 5,600HP and a bollard pull of 56 tons. “Kuzbass” is
classed under the Russian Maritime Register…… Kuwait Oil Company
(KOC) signed a contract for 14 Damen ASD Tugs. An extensive process of
yard prequalification and tender evaluation finally resulted in an award to
Damen this summer. The series consist of two types, with nine tugs of Damen’s recently launched 3212 model and
five units of the well-known 2810 design, providing 80 tons and respectively 50 tons of bollard pull. While being based
on existing Damen designs, these tugs have been extensively tailored to meet KOC’s exacting requirements on layout,
systems and performances. As part of KOC’s long term strategy of increasing the country’s export capacity,
substantial investments are being made to expand the marine facilities in coming years. The new tugs will be assisting
tankers at near-shore loading terminals and new single point moorings further offshore, for which they will also be
equipped with a powerful fire-fighting system. Cooperation between KOC and Damen goes back to late 1980s, when
Damen delivered steel crew/pilot tenders and the 39.65 x 11.63 x 5.90m, 5,684HP, fire-fighting / terminal tug “Sabahi”
to KOC. In the early nineties, after liberation from the Iraqi invasion, Damen delivered to KOC a complete new fleet of
tugs, crew tenders, work boats and mooring boats. Damen supported KOC throughout all these years with provision of
technical services, spare parts, and maintenance / renovation assistance. Damen’s naval architects and designers
have already started working on development of this unique series of state-of-the-art tugs. Damen Shipyards Galati in
Romania will build all 14 units, with deliveries scheduled from 2014 onwards. Wärtsilä propulsion will be installed in
the nine 80 ton bollard pull and five 50 ton bollard pull tugs. Delivery of the
Wärtsilä equipment is scheduled for 2014 and 2015. Of the 28 engines ordered
to power these vessels, the nine 80 ton bollard pull tugs will be powered by
Wärtsilä 26s and the five 50 ton bollard pull tugs by Wärtsilä 20 engines. In
addition to the engines and propulsion systems, contract includes Wärtsilä’s
Condition Based Maintenance (CBM) systems for each of the 14 vessels.
www.marcon.com
11
PM Coast Maritime Pte. Ltd. completed sea trials of “PMS 1386”, the first of two 32.0m x
12.8m Robert Allan Ltd. design “RAstar 3200” tugs to be built by their own shipyard in
Singapore. The “RAstar” class of tugs is intended for operations in exposed areas such as
many new LNG terminals where a high standard of sea-keeping is required. With Fi-Fi 1,
oil recovery and escort notations, this particular vessel is able to fulfill a wide variety of
duties in adverse conditions. The “PMS 1386” is classed by ABS with the notation +A1,
Circle E, +AMS, Towing Vessel, Unrestricted Navigation, +ABCU, Escort Vessel, FireFighting Class 1, Oil Recovery Capability Class 2. Tank capacities include 189m3 fuel oil,
30m3 fresh water and 12.7m each of foam and oil dispersant. On trials, the vessel met or
exceeded all performance expectations developing a bollard pull ahead of 65 tons and
free running speed ahead of 13.1kn. In common with the majority of Robert Allan Ltd.
designed tugs, a great deal of attention was paid throughout the design process to
mitigate the propagation of noise and vibration. This includes the essential resilient
mounting of the main engines, isolation of all exhaust system components, and the
extensive use of visco-elastic floating floor systems throughout. The shipyard executed all
these requirements exceptionally well, and the reward was an extremely
quiet ship throughout. The vessel has been outfitted to the highest
standards for a crew of up to ten people, although the normal operating
crew is six. The wheelhouse is designed for maximum all-round visibility
with forward and aft control stations providing maximum visibility to both
fore and aft deck working areas. The deckhouse has Master and Chief
Engineer single cabins with en-suite washrooms, a galley, a mess/lounge
and able locker space. The lower deck accommodation contains two cabins
each for up to four crew, a common lavatory and laundry area and galley
stores. “PMS 1386’s” forward deck machinery comprises a forward escort
rated hawser winch, manufactured by Ibersica, capable of recovery speeds
up to 40 m/min, pull up to 81 tons and with a brake capacity of 200 tons complete with integrated anchor windlasses
and a warping head. The aft deck is equipped with an Ibersica towing winch capable of recovery speeds up to 67
m/min, pull up to 54 tons and with a brake capacity of 175 tons complete with warping head as well as tow pins with a
roller and hold down block a capstan and a Palfinger 18500M knuckle-boom folding crane with 18.4 ton/meter
capacity. A six person capacity 4.4m long rescue boat with davit is located aft of the wheelhouse but without unduly
impacting visibility of the aft working deck from the wheelhouse. Ship-handling fenders at the bow are comprised of
two rows of 800 x 400mm cylindrical fenders. Courses of 300 x 300mm hollow “D” fender provides protection at the
main and foc’sle deck sheer lines, and 400mm “W” block type fendering is
used at the stern. Main propulsion for each tug comprises a pair of Niigata
6L28HX diesel engines; each rated for 1,838kW at 750RPM, and driving a
Niigata ZP-41 fixed pitch drive unit. Dual modulation Niigata HLP80Y slipping
clutches in each shaft line enable variation of prop speed independent of
engine RPM for use of the Fi-Fi pumps and deck machinery hydraulics driven
off the front end of each engine. The electrical plant comprises two identical
Volvo Penta D7A diesel gensets, each with power output of 139ekW.
The 24.4m x 9.15m x 4.04m depth “Ulupinar” series of compact ASD tugs has proven to be a
very successful part of Sanmar’s portfolio, with 14 vessels in service (including three brokered
by Marcon); the first one delivered in 2007. After five years, the Sanmar board decided that
some updates were needed and Robert Allan Ltd. was contracted to provide an updated
design that would keep this compact tug at the forefront of the modern tug world. Minor cosmetic
changes brought the look to a more modern standard, and improved outfit materials and method
have increased crew comfort and livability, but the real changes were “under the hood”.
Upgrades to the drive and propulsion system will ensure that this model has a long future ahead
of it! The first vessel has been completed and has entered service with the Sanmar fleet. The
vessel is classed by RINA for towing and firefighting operations. On trials, “Ulupinar XV” met or exceeded all
performance expectations, delivering a bollard pull of 50 tons ahead, 48 tons astern and a free running speed of 13kn.
The upgraded main propulsion package comprises a pair of Caterpillar 3512C high speed marine diesel engines, each
rated 1,500kW at 1,800RPM, driving Rolls Royce US 205 units, with 2.2m fixed pitch props.
www.marcon.com
12
Sanmar Denizcilik Ltd. in Turkey has announced two new series of ASD tugs
which meet requirements of the under 24m rule. These new models, all Robert
Allan Ltd. designs, build on the phenomenal success of the builder’s 45 to 50 ton
bollard pull “Ulupinar” series, mentioned above, of which 15 have now been
constructed. The “2400 SX” model (at right), an exclusive Sanmar design, is closest
to the “Ulupinar” but with a 2m increase in
beam over the same length. This ensures
greater performance as well as stability from
more powerful Caterpillar engines coupled
to larger Rolls-Royce Z-drives. The new
versions will give 60 or 70 tons bollard pull
depending on the propulsion system size
selected by the customer. The second series, the “2400 PO” model is a
shallower draft broad beamed ASD intended for in-harbor operations
configured primarily as a day boat although accommodation can be included if
required. It utilizes the same propulsion options as the “Marmara” Series to give
either 60 or 70 tons bollard pull.
The eight vessel of Sanmar’s 28.20m x 12.50m Terminal class ASD tugboats
will be joining the fleet of Pakistan’s number two port, Port Muhammad Bin
Qasim, located 35km east of Karachi. Commonly known as PQA and named
after General Muhammad Bin Qasim, it is the country’s deepest port and
currently caters for more than 40 per cent of the nation’s seaborne trade
requirements. Sanmar will additionally be supplying a 20m long, 20 knot pilot
boat, also to be built at the company’s yard near Istanbul. Sanmar was
declared the winning bidder for the construction and supply of both vessels
following an international open tender competition. Delivery is expected to take
place in March/April 2013. The tug is from the Canadian design team of Robert
Allan Ltd. and is of the highly successful “RAstar 2800” Class and is
very similar to “Seaspan Raven”, the first of four tugs delivered last
year by Sanmar to the Port of Vancouver destined to reshape
harbor towage and tanker escort operations in the environs of the
largest port in Western North
America. The RAstar escort/offshore
terminal tug designation is reserved
by the world’s leading tug designer
for a unique class of very highperformance ASD tugs,
incorporating a sponsoned hull form, which has been proven in both model and fullscale testing to provide significantly enhanced escort towing and sea-keeping
performance. The escort forces are enhanced by the effects of the sponson as well
as the foil-shaped escort skegs fitted. Roll motions and accelerations are less than
half those of comparable sized “standard” tug hulls. These tugs are intended for
escort operations in weather and sea-exposed locations where a high standard of
sea-keeping is required. Port Qasim is accessible through a 45km long channel for
vessels up to 11m draft and providing safe navigation for cargo vessels of up to
75,000dwt. PQA in its quest for capacity enhancement has launched a multi-faceted
strategy which also includes augmentation of its fleet of tugs and pilot boats. During
the second week of September, authorities from Port Qasim visited Sanmar shipyard
in Turkey for the keel-laying ceremony of the American Bureau of Shipping classed
tug which will be named “Kadiro” and be powered by a pair of Caterpillar 2,000kW
type 3516C diesels driving Rolls-Royce model US 255FP Z-drives. The twin screw
pilot boat, which will be named “Lahoot”, will also have twin Caterpillar engines, each
of 873BHP, and will have Bureau Veritas classification.
www.marcon.com
13
Ostensjo Rederi AS’ newbuild tug “Lomax” (ex-Terminal VII, Sanmar 04) will be
delivered from Sanmar Denizcilik in Turkey within the next couple of months. The
Robert Allan Ltd. RAStar 2800 design tug, which will have a bollard pull of about
80 tons, will be delivered late December 2012/early January 2013. The 28.2m x
12.6m x 5.3m depth / 3.75m draft (hull) / 5.3m draft (skeg) tug is powered by twin
2,350kW CAT diesels and will be classed ABS +A1, +AMS, ABCU, Towing Vessel,
Escort Service, Fire Fighting vessel class 1, Unlimited Navigation. The RAstar
Escort / Offshore Terminal Tug designation is designed with a sponsoned hull form,
which has been proven in both model and full-scale testing to provide significantly
enhanced escort towing and sea-keeping performance. The escort forces are
enhanced by the effects of the sponson as well as the foil-shaped escort skegs
fitted. Roll motions and accelerations are less than half those of comparable sized “standard” tug hulls. These tugs will
typically be high-powered, and are intended for escort operations in weather and sea-exposed areas such as many
new LNG terminals where a high standard of sea-keeping is required.
On 7th, November, the delivery ceremony of Martens Marine’s 58.7m AHTS
Vessel “Logindo Stature” (YX-3157) was held at Guangdong Yuexin Ocean
Engineering Co., Ltd. “Logindo Stature” is built to ABS +A1 Offshore
Support Vessel, AH, Towing Vessel, Fire Fighting Vessel Class 1, AMS, and
DPS-1. She is a Khiam Chiam Marine (KCM) design vessel, which measures
58.7m in length, with a molded breadth of 14.6m, and a molded depth of 5.5.
The maximum draught is 4.75m. The vessel can carry 42 men, 475m3of fuel
oil, 230m3of fresh water, 187m3of dry bulk and 250m3 of mud. Besides, “YX3157” achieves a bollard pull of 67.2T and a speed of 13.51 knots. Power is
provided by twin Caterpillar 3516C main engines, each rated 1,920kw at
1,600RPM, driving ZF controllable pitch propellers. The electrical power is
supplied by two 350KW CAT diesel-driven generators with a C4.4 CAT
emergency generator. Maneuverability is enhanced by a twin 8T Kawasaki
bow thruster. “YX-3157” is the first of the 58.7m AHTS vessels built by Yuexin
for Martens Marine and one of most important projects for Yuexin this year.
Under the support and coordination of the classification society, Yuexin has
adhered to the standard procedures and quality control laying a good
foundation of construction of the remainder of the rest three 58.7m AHTSs –
Hulls “Yuexin 3158”, “3159” and “3160”. The successful delivery of the
Indonesian flagged AHTS is attributed to the concerted effort made by the
project team of Yuexin.
VT Halter Marine, Inc. of Pascagoula, Mississippi, a subsidiary of VT Systems, Inc. delivered the 112’ ATB offshore
pusher tug, “Evening Star” to Bouchard Transportation Co., Inc. This tug is similar to others built for Bouchard in
previous years by Halter Marine. Measuring 112’ by 35’ by 17’, the 4,000BHP tug is classed by ABS A1 Towing
Vessel, Dual Mode, +AMS Unrestricted Service and is equipped with an
Intercon coupler system. “Evening Star” is powered by a pair of 1,500bkW
EMD 710-GCT2 diesels with Reintjes 4.429:1 gears and manganese bronze
fixed pitch props. Electrical power is provided by three 99kW AC generators.
Construction of the vessel began in June 2011 at VT Halter Marine’s Moss
Point Marine facility in Escatawpa, Mississippi. Upon delivery, the “Evening
Star” will enter into Bouchard’s fleet service in New York, New York. Morton
S. Bouchard III commented: “Bouchard Transportation Co, Inc. is pleased to
have taken delivery of another well-built VT Halter Marine tug boat.
Bouchard enjoys a thirty year old relationship with Halter, who has
continuously built vessels that meet and exceed Bouchard standards. The
‘Evening Star’ will be pinned to the newly built ‘B.No.250’ and operate on the East Coast. Bouchard looks forward to
future successful building programs with VT Halter Marine in the near future.”
www.marcon.com
14
Silverburn Shipping Ltd. turned to Ijmuiden-based OSD-Holland to
produce a design for a very robust and simple to maintain AHTS which can
carry out platform supply duties in shallow water and ice, but also retain the
flexibility to trade worldwide. The Caspian Sea and Russian rivers are a
demanding environment in which Silverburn Shipping has extensive
experience. Since the building of the “Tarpan” and “Tur” in 2009 and 2010
Silverburn has been developing plans for a new class of very shallow draft
AHTS vessels working down to 2.5 meters operating draft. The first vessel,
the “Arctic” built after this OSD design was launched in Turkey at the Sefine
Co. Inc. shipyard in Altinova on 26th
July 2012 as Hull No. 18. Drawing on 15
years operation and centuries of
combined staff experience in rivers, shallow water and ice conditions as well as
working closely with their Naval Architects Silverburn believes they have delivered
a remarkably cost effective unit for shallow draft work in Ice environments whilst
giving the optimum load capacity so, as the saying goes “getting more bang for
your bucks”. To ensure the best Ice capability Silverburn had a 10th scale model
fully tank tested in Ice conditions at Akers state-of-the-art facility in Helsinki
allowed us to refine the hull form, propeller, rudder and Bow thruster
arrangements. “Arctic” is presently classed BV Hull Mach Tug FiFi 1, Aut-UMS Ice
1A Unrestricted Navigation. While for this vessel the ice class is presently 1A, the
hull test performances are such that an increase to 1A Super or full icebreaker
specifications would not materially change the form or layout. The 49.6m x 15.8m
x 2.5m draft vessel has sufficient tank space for around 900m3 of liquids of which
575m3 is fuel and the balance fresh water and sewage. “Arctic” is also
equipped with large capacity water makers, accommodation for 20 persons
on board consisting of 8 crew and 12 passengers, 165 ton/meter crane,
double drum waterfall winch, deck space for two joints of drill pipe on deck
and a number of other features to enhance capability offshore. “Arctic” is
powered by a pair of Cummins QSK-60 totaling 4,400BHP at 2,300RPM
with Berg controllable pitch props in kort nozzles. The tug develops a
bollard pull of 50 tons. Towing gear consists of a double drum waterfall
winch with a wire capacity of 500m and 750m 44mm wire, 10 ton tugger
winch, hydraulic tow pings, 300T SWL Karm fork and 100T stern roller.
Following a batch of two vessels ordered by an India based client, “GPC Baru”, built under Cheoy Lee yard number
4982, is the first in the latest series of three “RAmparts 3200CL” tugs, this time for GPC Tugs S.A.S., a member of the
Sociedad Portuaria Regional de Cartagena (SPRC) Group in Columbia. The vessel will operate in the port of
Cartagena, Columbia’s second largest port. The vessels are built to Lloyd’s class, with the notation LR +100A1 Tug,
+LMC, +UMS, *IWS Unrestricted Service. The “RAmparts 3200CL” has
a range of engine options, and these latest deliveries are fitted with twin
Caterpillar 3516C engines, each developing 2,682HP. These diesels
drive a pair of azimuthing Schottel SRP1515FP fixed pitch rudder
propellers. The tugs offer excellent maneuverability, a top speed of 13.8
knots and bollard pull of 71 tons. Electrical power is from two 3-phase
115kW Perkins generators. The tug accommodates 10 crew on the
forward lower deck. The master and chief engineer each have their own
cabin on the main deck level. Hydraulically driven deck gear includes a
MacGregor towing winch/windlass at the bow and another MacGregor
towing winch at the stern. A FFS fire pump is driven off one main
engine, and supplies two FFS fire monitors. “GPC Baru” is fitted with an
extensive navigation package, primarily from Furuno, including radar, autopilot, echo sounder, GPS, Inmarsat-C, SSB,
VHF, Navtex, AIS, BNWAS, and satellite compass. Principal dimensions are 32.00m x 12.40m x 4.88m draft. Cheoy
Lee yard number 4982 left Hong Kong in October 2012, on an estimated 60 day voyage through the China Sea and
across the Pacific enroute to Cartagena, Colombia with a brief stop at Majuro to bunker and replenish stores, under
command of a delivery crew from Redwise.
www.marcon.com
15
Work continues at Diversified Marine, Inc. in Portland, Oregon on Harley Marine’s
newbuilding 120’ x 35’ tug “Bob Franco” (Hull 25 at right). The 5,300HP tug is being
built specifically to maneuver Harley’s 80,000bbl tank barges off the West Coast. Tug
will be powered with a pair of EPA Tier III CAT C175 diesels and Schottel azimuthing
drives developing a total of abt. 5,300HP. Two additional 100’ x 40’, 6,640BHP ASD
tugs are being built for Harley Marine at Nichols Bros. Boat Builders on Whidbey
Island. Both boats will be powered by a pair of CAT 3516Cs developing a total of
6,670BHP with an expected bollard pull in excess of 90 tons.
The following tugs are good examples of tugs built for strictly domestic service in
China and not showing up in the count on Fairplay’s World Orderbook.
Unfortunately technical details other than their names and photographs are limited.
On 6th November 2012, the 2,942kW azimuth thruster tugboat named “Wen Tuo 6”
and “Wen Tuo 8” (photo at left) which Jiangsu
Zhenjiang Shipyard (Group) Co., Ltd. of
Zhenjiang, China built for Wenzhou Port on the southeast coast of China were
successfully delivered on 6th November 2012….The azimuthing tug “Ying Gang
26” (photo right) built for the 145 plus year old Yingkou Port, the second-largest
port in northeastern China, was successfully delivered on 30th October. Yingkou
Port is a major import facility for northeastern China and ports of
Mongolia……On 12th October, the 3,600kW azimuthing tug “Jin Port 9” (photo
left) built for Jinzhou Port Co., Ltd. on the Bohai Rim in China’s northeast
Liaoning Province was successfully delivered to her new owners…… On 23rd
September, the two azimuthing thruster
tug named “Ya Zhou 17 hao” and”Ya
Zhou 18 hao” (photo right) built for Qing Dao Port were successfully
delivered……On September 19th, 2012, “Ninggang 22” (photo left) built by Jiangsu
Zhenjiang Shipyard Group Co., Ltd. for NanJing Port Group Co., Ltd. was
delivered from the shipyard and started its sailing smoothly. Mr. Shen Weixin, the
secretary, and Vice General Manger Chen Jianchang from NanJing Port Group Co., Ltd.,
located on the lower reaches of the Yangtze River, specially came to Zhenjiang shipyard to
attend the sailing ceremony. Jiangsu Zhenjiang Shipyard (Group) Co., Ltd. founded in 1951
and the oldest shipyard in the Jiangsu Province, not only builds for domestic service. In
2003, the yard moved to the Long Men-kou located on the east side of the Runyang
Yangtze River Highway. Their international orders over the last few years have included
tugs, standby safety vessels and anchor handling tug supply boats for clients as far afield as Maridive in Egypt, Qatar
Shipping Co., Adaro Energy, the Macquarie Group, Iraq Government, Falcon Energy Group and Pacific Radiance Ltd.
Kotug International’s new RT-80 design rotor-tug “RT Ambition” (Yard No. 922) is
currently underway from Singapore towards Bremerhaven, Germany under
command of a Redwise delivery crew. The 32.0m x 12.0m x 5.95m tug was built by
ASL Shipyard in Singapore and powered by three 1,838kW Niigata 6L28HX diesels
developing a total of 7,497HP at 750RPM. As of 30th October the “RT Ambition” was
in Malta. The 32m RT 80-32 was developed from an earlier Rotortug design with a
modified superstructure and bollard pull of 80 tons.
On 17th October 2012 the keel-laying ceremony of the prototype diesel-powered sea-going icebreaker project 21900M
rated power 16mW ordered by Federal agency of marine and river transport took place at Vyborg Shipyard JSC. The
vessel has ice-breaking capacity up to 1.5m ice thickness. The 116m x 26.5m vessel is intended for independent ice
escorting of heavy-tonnage vessels; towage, fire-fighting on floaters and other facilities; salvage and assistance to
distressed vessels; transportation of cargos. The 10,000 ton displacement vessels will be classed under Russian
Maritime Register of Shipping (RMRS) KM (*) Icebreaker 6 [2] AUT1-ICS FF2 BWM EPP ECO Helideck Special
purpose ship, and operated under the flag of the Russian Federation. Vessels will be powered by full-revolving rudder
props and bow thruster with machinery provided by Wartsila. The delivery terms for the vessels completed are May
and October of 2015. The keel-laying ceremony for the second icebreaker project 21900M is planned at Vyborg
Shipyard at the end of the year 2012.
www.marcon.com
16
As of 24th October, the 2,000HP Project 90600 design ASD tug “No. 934”, being
built by Pella Shipyards of Leningrad for the Russian Navy is ready for the
mooring trials. Before the end of the year the 25.4m x 8.8m x 4.66m tugboat will be
delivered to the state customer. Tug is classed KM *Arc4 R3 AUT3 Tug by the
Russian Maritime Register of Shipping. Tug “No. 934” (at right) is fitted with Rolls
Royce azimuthing drives……After
successfully passing sea trials State
Commission has accepted the 2,000HP ASD tugboat “RB-394” (Project 90600,
building No. 933 photo at left). At the nearest time the vessel will be put into
operation within Baltic Navy Fleet. Like her sister above, she is fitted with Rolls
Royce z-drives and classed by the Russian Maritime Register of
Shipping……Pella Open JSC is completing the design works and starting the
preparation to construction of Pella PS-45 design multi-function rescue tug of
unrestricted navigation area. The 48.0m x 13.3m x 5.4m draft rescue tug (photo at
right) is designed for a 14.5kn free running speed and bollard pull of not less than
75 tons. Vessel will be classed KM * Arc4 [1] Aut 1 FF2 WS Salvage Tug by the
Russian Maritime Register of Shipping…… After successfully passing her sea-trials
the JSC SC Zvyozdochka on 4th October signed the Act of Acceptance and
Transfer of the 34.4m x 12.7m x 6.0m depth tugboat “Alexandr Zryachev”, Building
No. 502, project PE-65 (at left). “Alexandr Zryachev” is powered by a pair of
1,864kW CAT 3516B diesels developing a
total of 4,462HP at 1,600RPM, bollard pull
of 63 tons and free running speed of 13kn. The twin screw tug is currently
enroute to her new homeport of Arkhangelsk……The launching of the new
2,000HP ASD tug “RB 395”, Building No. 934, Project 90600 (at right) was
conducted on 28th September. The 25.4m x 8.8m x 4.66m tug is fitted with aft
mounted Rolls Royce azimuthing
drives. “RB-395” is scheduled to be
delivered to the state customer – RF
Navy, before the end of this year……The State Commission accepted the
2,000HP ASD tugboat “RB-391” (building No 932, project 90600 at left) on 24th
September. The tug is being delivered through inland waterways to
Novorossiysk, where she will be put into
operation within Black Sea Navy
Fleet……The fitting-out construction of the
16.74m x 5.50m x 2.25m draft, 444HP buoy boat “Vega” of Project R1760 for the
needs of Federal State unitary enterprise Rosmorport was completed on 20th
September. The boat (at right) will be transferred into operation to Kaliningrad
Administration of the North-West Basin Branch of
Federal State unitary enterprise
Rosmorport……The sea yard trials of the
2,000HP ASD tugboat “RB-391” (project 90600,
Building No. 932 at left) were successfully completed on 6th September and the
25.4m x 8.8m x 4.7m vessel was transferred to the Russian Navy……On the same
day “RB-391” was successfully seatrialed, the launching of the second
Robert Allan Ltd. “RAscal-2000” design,
ASD line-handling tug was conducted. The 20.4m x 8.5m x 3.3m draft vessel
(at right), fitted with Rolls Royce azimuthing drives, is expected to be
completed next year when she will be delivered to the state customer.
Excluding tugs being built for the
Russian Navy, which are not reflected in
Sea-Web records, Pella has one other
34.4m x 12.7m, 63 ton bollard pull, twin
screw tug on the order book – the “Pella 503”, which has been launched. Tug is
powered by CAT 3516Bs and appears to be sister to the “Aleksandr Zryachev”
(Building No. 502) mentioned above.
www.marcon.com
17
North Kingston, Rhode Island’s Senesco Marine built 4,200BHP AT/B tug
“B. Franklin Reinauer” (Hull 206) was delivered to Reinauer Transportation
of Staten Island, New York on 24th September. The 109.9’ x 33.0’ x 18.0’
depth tug is powered by a pair of MTU/DDC 16V4000 series diesels rated
at 2,360BHP each at 1,800RPM with Lufkin reduction gears and stainless
steel 104” diameter props in a pair of high performance Nautican nozzles
with triple rudders. Deck machinery consists of a 25HP JonRie Intertech
capstan and Beacon JAK 400 coupler system. “B. Franklin Reinauer” is a
“Facettug” class AT/B tug design from
Bob Hill at Ocean Tug & Barge
Engineering. The tug is created solely
from easily handled, pre-fabricated
sections which makes the creation of double-skin fuel tanks significantly easier.
117’ versions of the twin screw design are being built in both 4,000HP conventional
drive and 5,000HP diesel electric drive variants. The design has been fully tank
tested and the development of the initial shape verified by extensive CFD studies.
Work continues on the slightly larger AT/B Tug Senesco Hull No. 107, “Curtis
Reinauer” (photo right) which is also powered by a pair of MTU 16V5000 M60
diesels.
Greenbrier Companies of Lake Oswego, Oregon; parent company of west coast barge builder Gunderson Marine in
Portland, reported results for fiscal fourth quarter and fiscal year ended August 31, 2012. Full year revenue reached
$1.81 billion, a 45% increase over last year and a new record for Greenbrier. Record net earnings attributable to
Greenbrier for the year of $58.7 million was a nine-fold increase over prior year. Net earnings for the fourth quarter
were $7.4 million on revenue of $443.5 million. New railcar deliveries for 2012 were a record 15,000 units, compared
to 9,400 units in 2011, and 2,500 units in 2010. During the
fourth quarter, Greenbrier received orders for 2,900 new
railcars. Marine backlog totaled $25 million as of August
31, 2012; additionally they were awarded a letter of intent
for 15 barges valued at $60 million subject to significant
permitting and other conditions. William A. Furman,
president and CEO noted: “In fiscal 2013, we expect less
business visibility than in fiscal 2012, as a result of global
economic and geopolitical uncertainty. We will focus on
four key areas beyond basic execution of our operating
plan. First, we will expand capacity in higher margin railcar types, such as tank cars, to respond to market demand.
Second, we will continue to expand our product offerings in the businesses that are related to the oil, gas and
chemical industries and in other high-growth areas. Third, we will continue to improve our working capital position,
increase free cash flow and pay down debt. Lastly, we will continue to seek diversification and growth opportunities in
the rail freight marketplace, especially in leasing.”
US Fab, a Vigor Industrial company, won the contract to build American Construction Co., Inc.’s newest vessel, a
242’ x 54’, 4,050 cubic yard, split hull dump barge. The barge was designed by The Glosten Associates of Seattle,
Washington and features an advanced sealing mechanism to safeguard environmentally sensitive areas from potential
leakage. “There are a limited number of split hull dump barges
on the West Coast and American Construction is a leader in both
cutting edge equipment and quality services,” said Bryan
Nichols, Sales Representative, Vigor Industrial. “We’re proud to
add them as a customer and are looking forward to a long-term
relationship.” Construction of the barge will take place in Vigor’s
Swan Island shipyard in Portland, Oregon. The yard is outfitted
with an expansive 800’ buildway, 600T gantry crane and
150,000’ of covered fabrication bays, ideally suited for new
builds. Construction is on a tight schedule, with delivery set for
June 30, 2013. “US Fab has a solid reputation for on time, on budget deliveries,” said Steven Brannon, President,
American Construction. “We’re confident they will hit our deadlines and deliver a quality vessel to augment our fleet
and ensure the safety of our operators.” American Construction is a premier west coast dredging and marine
construction company headquartered in Tacoma, Washington. The firm’s history in the Puget Sound dates back to
1903.
www.marcon.com
18
Spanish tug company, Remolcadores Ibaizabal has taken delivery of two
new 36.65m x 13.60m x 4.80m depth AVT 36/70E Escort tugs from the
drawing board of Robert Allan Ltd. The tugs were constructed by
Astilleros Armon in Navia, Spain. The design features a full raised
forecastle running nearly half the length of the tug to provide a high
standard of accommodation and the best possible sea-keeping capability
for operation in exposed conditions. The vessel will be outfitted to the
highest standards for a crew of up to 14 people. Main deck
accommodations include three two-person cabins, four one-person
cabins, a galley, mess, galley stores, workshop, oil lab, locker room/lobby,
and deck store. The deckhouse at forecastle deck level includes four one-person
officer cabins. The wheelhouse is designed for maximum visibility with a single
control station providing maximum visibility to both fore and aft deck working areas,
with the emphasis on the aft deck. The lower deck includes engineer's stores, and
laundry facilities. All cabins are of a generous size, and boast en-suite lavatory
facilities. The noise level throughout the crew accommodation is predicted to be in
the range of 60 dBA, based on utilizing advanced methods of isolating main
propulsion machinery, as well as high grade insulations and floating floor techniques.
Main Propulsion for the AVT 36/70E comprises a pair of MaK 8M25 diesel engines,
each rated 2,640kW at 750RPM, and each driving a Voith model 32R5-265-2
cycloidal propeller in tractor configuration. This combination is predicted to deliver a
Bollard Pull of 70 tons, and provide a free running speed of not less than 13.5 knots.
The indirect escort steering force is estimated at 110 tons at 10 knots. The operating
range at economical cruising speed is estimated at 3,500 nautical miles. Fire-fighting
will be to a Fi-Fi 1 Class. The main towing winch is a waterfall-style, double drum
type, in which the upper drum contains 1,000 meters of 56mm steel wire rope. The
lower drum is a split configuration with a 250 meter synthetic hawser for escorting,
and a 150 meter synthetic line for harbor towing. The anchor windlass, in
a horizontal axis configuration is fitted with two chain wildcats and two
warping heads, which are clutched separately. Towing flexibility is
enhanced by the inclusion of a 70-ton, radial arm tow hook, while salvage
and general stores/deck operations are aided by inclusion of a 25-tonmeter knuckle boom crane. Ship-handling fenders at the stern (skeg end)
comprise a 900 x 450 cylindrical fender above a row of 450mm “W” block
fenders. A 300 x 300 hollow “D” fender provides protection at the main and
foc’sle deck sheer lines, and “W” block type fendering is used again at the
bow.
Shipowner Fukushima Kisen KK, based in Iwaki on the east coast of Japan, has commissioned the first Voith Water
Tractor (VWT) with a fully electronic control system (ECS). On the ECS version, the hydraulic unit is no longer
separate but is installed on the rotor casing foundation of the Voith Schneider Propeller (VSP). Not only does this save
space, but it also simplifies maintenance and increases reliability. The new
VWT “Shinano Maru” has been designed for harbor assistance and escort
duties. The tug was constructed by Niigata Shipbuilding based in Niigata,
Japan, and is equipped with two size 32 R5 ECS/265-2 VSPs with an input
power of 2,600kW each. The owner, Dr. Nakamura, operates a fleet of
different harbor assistance and escort tugs in the port city of Iwaki. In addition
to the new control system, the VWT “Shinano Maru” is equipped with a Voith
Turbo Fin to increase indirect tow-rope pull, in particular when escorting. The
vessel is also fitted with a Voith roll stabilization system. With this first
installation of the fully electronic control system in a VWT, Voith was also able
to optimize the hydraulic components of the VSP propulsion system. While
these components had previously been installed separately, they are now integrated into the propulsion system, thus
saving space. This in turn results in a reduction in energy consumption due to the direct control of the proportional
valves and the elimination of a separate hydraulic unit. The 39.3m x 13.6m x 5.30m depth / 4.8m draft “Shinano Maru”
tractor tug was built by Niigata Shipbuilding & Repair as Hull No. 0053 and powered by a pair of Wartsila 8L26
developing a total of 7,200HP at 1,000RPM and a bollard pull of 75 tons. Tug is classed LR +100A1 Tug, FiFi Ship 1
(2,400m3/h) with waterspray, +LMC, UMS.
www.marcon.com
19
On 18th October 2012, van Wijngaarden Marine’ new tug / workboat “Amerstroom”
was transported from the manufacturing hall to the river and launched using the
yard’s heavy gantry crane and a floating sheerleg. There the hull was prepared for
towing / pushing to her fitting out location at Neptune Shipyards in Aalst by van
Wijngaarden’s inland launches “Vliestroom” and “Merwestroom”. The 23.7 x 8.75 x
3.25m “Amerstroom” is registered under Dutch flag. Two CAT C18 mains develop a
total output of 714kW (970HP). It is expected that the tug during trials will achieve a
speed of 10kn and pull of 16.5 tons. Delivery is scheduled for end March 2013.
An earlier launching I missed in the last Tug Market Report was Marnavi Transporti
Marittimi’s anchor handling tug “Ievoli Amaranth” (ex-Selah 65) which was launched
by Selah Makina Sanayi ve Ticaret A.S. Shipyard in the port of Tuzla, Istanbul,
Turkey on 12th July. The 65.72m x 15.75m x 7.80m depth, Italian flagged tug is
powered by a pair of 400kW MaK 8M32C diesels developing a total of 10,876HP and
fitted with variable pitch props in fixed kort nozzles. Maneuverability of the dynamically
positioned tug is assisted by two 600kW bow thrusters and a single 600kW stern
thruster. Continuous bollard pull is approx. 120 tons. “Ievoli Amaranth” is classed RINA
- C✠ Supply Rescue Vessel, Anchor Handling, Tug, Unrestricted Navigation, Clean
Air, Clean Sea, Fire Fighting 1 – Water Spray, AUT – UMS, Recoil, DP-2. Towing gear consists of a 400kN brake
towing / anchor handling winch with capacity for 1,500m 70mm wire on each drum, gypsies for 3” and 3.25” chain, two
10T capstans, two 12T tuggers, 400T SWL shark jaw, 300T SWL tow pins and a 320T SWL stern roller.
Cochin Shipyard Limited (CSL) delivered the 120T bollard pull AHTS “SCI Ahimsa”, at a
glittering ceremony to the Shipping Corporation of India Ltd., Mumbai (SCI). This is the
third of the series of four 120 ton bollard pull AHTSs being built by CSL for SCI. The
vessel is an AH03 type, designed by STX OSV, Norway (ex- Aker Yards) and certified
under dual class by ABS & Indian Register of Shipping. “SCI Ahimsa” is registered under
Indian flag. This 65.2 x 16.0m vessel is a high-end AHTS is equipped with a Rolls Royce
Brattvaag waterfall anchor handling towing winch with a tested bollard pull of 120 tons.
The vessel is also equipped with two 4,000bkW diesels with controllable pitch props in
kort nozzles. The vessel is fitted with Grade 1 dynamic positioning and complies with ERRV class “C”, which allows the
vessel to work as an emergency rescue and recovery vessel in case of an oil field emergency, plus rated FiFi class I.
“SCI Ahimsa” has accommodations for 29 persons. The shipyard is presently constructing 3 other offshore vessels for
SCI.
Multraship of Terneuzen, The Netherlands, has taken delivery of “Multrasalvor 3”, a
new 23.3 x 9.0 x 3.2m Multi-Cat 2409 from Damen. It is a bigger and better version of
their old 1994 built “Multrasalvor”, which was sold to Leask Marine Ltd. in the U.K. The
new Multi Cat has two cranes, spud-poles, an A-frame and a double-drum winch. She
is powered twin CAT C32 ACERT DI-TAs totaling 1,724BHP developing a bollard pull
of 23 tons. The vessel is extremely versatile and capable of undertaking a diverse
range of roles in maritime contracting and salvage sectors. “Multrasalvor 3” has
assumed “Multrasalvor’s” role as a workboat in the London Gateway project on the
Thames.
A thousand miles up the Amazon River the Port of Manaus has long attracted ocean
going vessels. In the 19th Century they came for rubber, today the products are more
varied with a duty-free zone generating additional commerce. Other ports along the
Amazon may be for a single commodity such as soya beans. Recently the first of a
series of Robert Allan Ltd., -design ship docking tugs was launched from Estaleiros
Rio Negro Ltda. (ERIN). The tug was launched into the waters of the Rio Negro at
Manaus where it merges with the Solimões River to form the Amazon proper. This
latest boat is a RAmparts 25 with a 25m length and 10m beam. Hull has a molded
depth of 4.19m and, with additional depth of Z-drives and skeg, it has a 4.55m draft.
Main propulsion is a pair of Cummins Tier 2, Cummins QSK38-Ms each delivering 1,400HP to Rolls Royce US155
model azimuth drives. The new tug is fitted with a hawser winch and will be employed at the Itacoatiara Port of
Hermosa Logistics about 260km down river from Manaus. (Credit: Cummins Hotips)
www.marcon.com
20
ASD tug “GPC Rosario”, the second of three 32m x 13m x 5.5m Ramparts 3200
sister-tugs being built by Cheoy Lee Shipyards for Cartagena Port Group
departed from Hong Kong the end of November bound for Cartagena, Colombia.
Both tugs are being delivered by Redwise. (See also page 15)
Markey Machinery of Seattle,
Washington was awarded the
order for a complete suite of deck machinery for the most powerful
Harbor Class Tugs ever to be built in Canada. Tugs will be operated by
Group Ocean of Quebec, Canada for harbor operations, ship escort,
short and long distance towing, as well as rescue ops and wreck
removals. The new TunDRA 100 tugs, highly powerful, efficient and
versatile, will serve to meet the growing needs in power and capacities
for ice navigation of the maritime market in Northern Quebec and
Canada. The hull of the TunDRA 100 tug will be reinforced and certified
1A Super F.S. by Lloyd’s Register for ice navigation, and its engines will
develop a force of 8,000BHP, resulting in a bollard pull of nearly 100 metric tons. Jacques Tanguay, Group Ocean
First VP and General Manager stated in a Group Ocean press release earlier this year that “Ships are constantly
increasing in size, Chinamax vessels are almost here and the shipping market of Northern Quebec and Canada offers
a horizon of sustainable development. We needed to equip ourselves with tugs able to meet the increased demand in
power and capacity in the ice. This new project is the result of several technical studies and a logical expansion of our
fleet. We are already considering the production of a series of these ultra-powerful tugs”.
The Markey suites of deck machinery will include a Markey Model
DESDF-48-200HP electric Class III hawser winch with a split-drum sized
to store up to 300m of 10” circ. (80mm dia.) soft-line on each side, an
extra-heavy duty level-wind featuring two rope guides to service each
side of mid-flange, Render/Recover® capable of operation up to full
rated line-speeds and line-tension, instrumentation to allow for the
display of line-tension, scope, and line speed during all modes of
operation, controls including a handheld wireless remote unit, as well as
wheelhouse and on-deck stationary control stations and a load shedding
feature enabling the winch to automatically reduce power to a predefined
limit if the generator becomes too loaded. The Markey TES-40UL-125HP
electric single-drum towing winch is fitted with a drum sized for up to 800m of 64mm (2.5”) wire rope, enclosed chainand-diamond-screw automatic level-wind, in oil-bath (spooling gear); instrumentation to allow for the display of linetension, scope, and line speed, handheld wireless remote operation using the same control used for hawser winch
operation, plus dedicated wheelhouse and on-deck stationary control stations. Two Markey VEP-16-40 electric vertical
capstan / windlasses sized for 26mm stud link chain are also furnished along with an on-deck stationary control
station.
Scott Kreis, Markey’s VP of Sales and project leader for this opportunity, makes special note of the extensive
collaborative effort between Group Ocean, Markey, Robert Allan Ltd. and Lloyd’s Register. “When we were first
approached by Group Ocean over two years ago, the development and coordination of ‘Ice Class’ standards by the
world’s marine rating agencies were in their earliest stages. Group Ocean had never used Markey equipment, but was
well aware of our reputation as a manufacturer of rugged, reliable, and technologically superior equipment. Following
our standard sales and engineering methodology, we visited Group Ocean’s headquarters, met with their senior
management and rode their tugs to gain a better feel for their particular operational challenges. We then applied our
decades of experience in supplying deck equipment for service in
Alaska and oceanographic winches for use in Antarctica to satisfy the
requirements of both Group Ocean and Lloyd’s Register. Finally, we
worked closely with the naval architects and marine engineers at Robert
Allan Ltd to integrate the winch systems into the TunDRA 100 tug
design.” The two 36.0m length overall x 13.0m x 6.85m depth / 5.35m
draft twin screw tugs are to be powered by a twin 2,970kW MAK 9M25
diesels developing a total 8,078HP at 750RPM. (Vessel design by Robert
Allan Ltd. Images courtesy Ocean Industries/Ocean Group - tug builder & operator).
www.marcon.com
21
On November 16th, Kotug´s new build RotorTug “RT Ambition” arrived in
Bremerhaven. The tug left ASL Singapore Pte. Ltd. on September 22th
2012 and sailed under own power. “RT Ambition” has a length of 32 m, a
width of 12m, 6,456BHP and a bollard pull of 84 tons. Due to her three
propulsion units, which independently can be turned 360° degrees, the
Rotortug has an unique maneuverability. RT Ambition is the 11th RotorTug of
a series of 14 sister vessels. They are built at Niigata Shipyards Japan and
ASL Shipyard Singapore respectively and are a part of Kotug´s
comprehensive fleet expanding and renewal program. Kotug expanding its
services to ports and terminals in Europe, West-Africa and Australia.
recently Kotug started towage activities in the new German deep sea port
Wilhelmshaven, next to Hamburg and Bremerhaven the third German Port where Kotug is active. Due to this growth
and the increased size of their client’s vessels, Kotug needed this additional Rotortug. Kotug´s president Ard-Jan
Kooren emphasized that despite the downturn shipping industry, also affecting the towage business, Kotug continues
to invest into a modern and strong tug-fleet to keep the high quality of their services. The “RT Ambition” will be
equipped and prepared to commence her towage activities in the port of Bremerhaven around 30th November. “RT
Ambition” is powered by three 1,838kW Niigata 6L28HX diesels develping a total of 7,497HP Mcr.
U.S. Transportation Secretary Ray LaHood today announced a combined $1.5 million for three
demonstration projects at Los Angeles Harbor, Calif.; Puget Sound, Wash., and Perryville, Mo., to
reduce harmful marine emissions by repowering ship engines to use alternative fuels and
technologies. The funding is the first-ever awarded by the U.S. Maritime Administration for
competitive selection of environmental innovation projects. “The same benefits provided by more
fuel-efficient cars, can help the maritime industry, too,” said Secretary LaHood. “By encouraging
projects that involve more fuel-efficient ships, we can help businesses save money and protect the
environment at the same time.” The three awardees were chosen to partner with MARAD as part of
a new program to demonstrate innovative technologies and practices and share data on the results. “As our maritime
industry enters a new era in reducing vessel air emissions, publicly-available data for promising technologies will help
take the guessing game out of which ones work best for particular uses,” said MARAD Administrator David Matsuda.
“Through smart environmental sustainability efforts like these, mariners who work aboard these vessels and those who
live and work in port communities will all breathe cleaner air.” In California, Foss Maritime will receive $600,000 to
convert the 2008 built “Dolphin Class”, Los Angeles Harbor-based, ASD tugboat “Alta June” to a new fuel-efficient
diesel hybrid engine that retains power and maneuverability while reducing
emissions, noise and fuel consumption. Just as hybrid vehicles achieve better
mileage in city driving, as starts and stops recharge its battery, a hybrid engine will
specifically benefit a tugboat as it makes short trips around a harbor. In a 2010, a
study by University of California Riverside compared the 78’ x 34’, 5,080BHP
conventionally powered “Alta June” with the sister, but hybrid tug “Carolyn
Dorothy” (photo). “Carolyn Dorothy” put out 27% less carbon dioxide, 51% less
nitrogen oxide and 73% less diesel soot……In Puget Sound, Washington, the
Puget Sound Clean Air Agency will receive $400,000 to replace the engine of
the Seattle-based, 73.5’ x 23.6’ x 9.7’ depth twin screw tugboat “Island Chief” with Tier II, lowsulfur diesel engines and to support a student internship program between the Puget Sound
Clean Air Agency and Seattle Central Community College’s Seattle Maritime Academy to
provide students with field–based training and experience replacing engines. Island Tug and
Barge’s “Island Chief” was built in 1963 by Luby Guidry in Houma, Louisiana and is presently
powered with a pair of CAT 398TAs developing a total of 1,700BHP at 1,225RPM……In
Perryville, Missouri, The Southeast Missouri Planning Commission will receive $500,000 to
replace the engines of the Mississippi River-based, towboat “Jimmy Brown” with engines
capable of running on biodiesel fuel. Such long trips on the Mississippi River are akin to
highway driving and make the “Jimmy Brown” an ideal candidate for biofuel,
since it will not require frequent “braking” like a harbor tug would. “Jimmy
Brown” (ex-Bonnie, Conti Bonnie) was built in 1979 by Jeffboat, Inc. of
Jeffersonville, Indiana for ContiCarriers & Terminals, Inc. of Chicago and now
owned by AEP River Operations LLC. The 145’ x 48’ x 11.2’ towboat is
powered by a pair of EMD 16-645E7BAs developing a total of 6,200BHP with
Lufkin 4.189:1 gears and kort nozzles.
www.marcon.com
22
Wärtsilä’s third quarter 2012 intake increased 14% to Euro 1,275 million (1,118)
and net sales increased 28% to Euro 1,087 million (851). Operating result (EBIT)
was Euro 113 million or 10.4% of net sales (Euro 94 million or 11.0%). For the
period from January – September 2012, order intake increased 10% to Euro 3,583
million (3,267) and net sales increased 7% to Euro 3,191 million (2,970). At the end
of September, Wärtsilä’s order book totaled Euro 4,724 million (4,042), an increase
of 17%. Bjorn Rosengren, President & CEO commented: “Despite continuing
uncertainty in the global economy and tough market conditions, both our order intake and net sales developed well. In
the third quarter they were up by 14% and 28% respectively. Ship Power’s year-on-year performance is strong, and
has been supported by both an active offshore sector and the Hamworthy acquisition. Among the highlights are a
major engine and propulsion equipment order for six Brazilian drillships from Jurong Shipyard Pte Ltd., and three
platform supply vessel related orders from Statoil, as well as the first four ballast water management system orders.
Wärtsilä again received a record power plant order, this time for an approximately 600 MW power plant to be
constructed in Jordan. It will be the world’s largest tri-fuel power plant. I am also happy to note that the growth trend for
Services continues, regardless of the difficult market environment that many of our marine service customers are
experiencing. We believe that net sales will grow this year by around 10-15%, which is more than originally estimated.
Our profitability now stands at 10.3% and we believe it will improve in the fourth quarter. As a result, we expect
profitability for the full year to be 10.5-11%.” Wärtsilä expects net sales for 2012 to grow by 10-15% (previously 5-10%)
and operational profitability (EBIT% before non-recurring items) to be 10.5-11% (previously 10-11%).
During the third quarter of 2012, 229 contracts for new vessels were registered. Since the beginning of 2012, 761
vessels have thus far been contracted globally. This activity level is considerably lower than in 2011, when the
average quarterly contracting volume was 353 vessels. The decrease in activity is a reflection of the continuing tough
market conditions for the traditional merchant segments, i.e. bulkers, tankers and
container vessels. In these segments owners are experiencing severe pressure
resulting from low earnings and high operating expenses, including high fuel costs,
as well as difficulties in accessing financing. Contracting activity has, however, been
robust for the offshore and specialized vessel markets during 2012, with offshore
accounting for a notable 30% of all contracting, as measured in the number of
vessels. The gas carrier market (LNG carriers & LPG carriers) has also been active
with respectively 21 and 43 contracts booked this year to date. There has also been
good contracting activity in the ferry segment. China and South Korea continued to
be the dominant countries in shipbuilding, capturing respectively 36% and 35% of
the contracts confirmed in 2012 in terms of gross tonnage. China closed the gap on
South Korea as Chinese yards diversify their product mix and are moving into the offshore segment, in particular
offshore support vessels. Non-traditional shipbuilding countries are emerging with 17% of the contracts confirmed.
Brazil, Norway, the USA and Turkey stand out amongst the small shipbuilding nations that have been capturing
newbuilding contracts during 2012. Wärtsilä’s share of the medium-speed main engine market was 48% (49% at the
end of the previous quarter). The market share in low-speed engines decreased to 18% (22). In the auxiliary engine
market, Wärtsilä’s share was 5% (5).
Wärtsilä’s order intake for the third quarter increased by 14% to EUR 1,275 million (1,118). In relation to the previous
quarter, order intake increased by 6% (EUR 1,198 million in second quarter 2012). The book-to-bill ratio for the third
quarter was 1.17 (1.31). Third quarter order intake for Ship Power totaled EUR 391 million (196), an increase of 99%
over the corresponding period last year. Compared to the previous quarter, order intake decreased by 13% (EUR 447
million in second quarter 2012). During the review period, offshore and specialized tonnage related orders continued
to dominate. Among various orders in these segments, Ship Power received a major engine and
propulsion equipment order for six Brazilian drillships from Jurong Shipyard, an order for three
new PSVs for use by the Norwegian oil and gas company Statoil, and an order for dual-fuel
engines for China’s first LNG powered tugs from CNOOC Energy Technology & Services Ltd.
The recently acquired Hamworthy related ordering activity continued to be lively, especially for oil
& gas and environmental solutions. Offshore segment represented 53% of third quarter order
intake, while the Merchant segment’s share was 21% and Special Vessels accounted for 18%.
The Navy segment’s share of order intake was 4% and Cruise & Ferry segment’s 3%. Order
intake in Wärtsilä Hyundai Engine joint venture in South Korea, and Wärtsilä Qiyao Diesel joint
venture in China, producing auxiliary engines, totaled EUR 175 million (216) during the JanuarySeptember 2012 review period. Wärtsilä’s share of ownership in these companies is 50%, and
the results are reported as a share of the result of associates and joint ventures.
www.marcon.com
23
The total order book at the end of the January – September 2012 review period stood at EUR 4,724 million (4,042), an
increase of 17%. In relation to the previous quarter, Wärtsilä’s order book increased by 5% (EUR 4,515 million in the
second quarter of 2012). At the end of the review period, the Power Plants order book amounted to EUR 1,691 million
(1,478), an increase of 14%. The Ship Power order book stood at EUR 2,226 million (1,740), which is 28% higher than
at the same date last year. The Services order book decreased by 2% to EUR 808 million (825).
Wärtsilä’s net sales for the third quarter increased by 28% to EUR 1,087 million (851) compared to the corresponding
period last year. Net sales for Power Plants totaled EUR 304 million (243), an increase of 25%. Ship Power’s net sales
for the third quarter totaled EUR 339 million (197), which is 72% higher than in the corresponding quarter last year.
The third quarter net sales for Services increased by 5% to EUR 435 million (412). Wärtsilä’s net sales for JanuarySeptember 2012 increased by 7%, totaling EUR 3,191 million (2,970). Net sales for Power Plants totaled EUR 930
million (952), a decrease of 2%. Ship Power’s net sales increased by 23% and totaled EUR 875 million (713). Net
sales from the Services business totaled EUR 1,377 million (1,303), an increase of 6%. Of the total net sales, Power
Plants accounted for 29%, Ship Power for 27% and Services for 43%.
The business environment for the shipping and shipbuilding industry is challenging and concerns over the global
economy continue to cause uncertainty. The traditional merchant segments are under particular pressure and risks
related to cancellations and delayed deliveries in this area have elevated.
The power generation market is expected to remain active during the remainder of 2012. Ordering activity continues to
be focused on emerging markets, which continue to invest in new power generation capacity. In the OECD countries,
there is still pent-up power sector demand, mainly driven by CO2 neutral generation and the ramp down of older,
mainly coal-based generation. Despite the continuing interest for new power generation investments, the macro
economic uncertainty may delay investment decisions. Robust contracting activity, in line with the activity levels seen
during 2011 and so far in 2012, is expected for the offshore, gas carrier, and other specialized vessel markets. The
outlook for overall vessel contracting activity during 2012 is slightly negative, with full year contracting expected to be
less than during 2011. The decrease is largely driven by the low contracting levels in the traditional merchant
segments. Interesting opportunities are being seen in the following areas: efficiency improvement, gas as a fuel, and
environmental solutions. These are now central issues in many newbuilding discussions and are expected to grow in
importance going forward.
Wärtsilä has been awarded the contract to supply integrated power and
automation systems for two new icebreakers being built for a Russian stateowned enterprise by Vyborg Shipyard JSC, a long-time partner of Wärtsilä. The
contract was signed in October 2012. The vessels, scheduled to be delivered in
2015, will operate mainly in the Baltic Sea and in Arctic waters. Wärtsilä’s track
record in supplying reliable and technically sound solutions for icebreakers, and
other vessels operating in arctic conditions, was cited as being a key factor in
the award of this contract. There is an option pending to supply similar
equipment for a third icebreaker within this same project. “Wärtsilä has a
leading market position in supplying power and automation systems for
icebreakers and other vessels that operate in harsh, arctic conditions. Such ships are usually working a long way from
port repair facilities, and for that reason reliability and operating efficiencies are essential. We have worked closely
with the leading Russian ship-owners for many years, and they
are well aware of our capabilities in this area,” says Aaron
Bresnahan, VP Sales, Wärtsilä Ship Power. Wärtsilä has been
present in Russia for more than 30 years and has a strong
position in the market. The company employs more than 125
people serving the marine and power plant markets, for both new
installations and after-sales service of existing installations. Each
vessel is equipped with: 4 x 12-cylinder Wärtsilä 32 main engines,
2 x 4-cylinder Wärtsilä 20 auxiliary gensets, Wärtsilä Power
Management System (PMS), Wärtsilä Power Distribution System
and Wärtsilä Power Drive System. Vyborg Shipyard JSC is one of
the largest shipbuilding companies of the North-Western Region
of Russia with over 60-years’ experience in shipbuilding. Since the Shipyard was founded (1948) there have been built
more than 200 different vessels with deadweight up to 12,000 tons, total displacement over 1,300,000 tons.
www.marcon.com
24
Caterpillar Inc.’s third-quarter 2012 sales and revenues of $16.445 billion, a 5% increase
from third-quarter 2011 sales and revenues of $15.716 billion. Machinery and Power
Systems (M&PS) operating cash flow was $994 million in the third quarter of 2012,
compared with $2.037 billion in third quarter 2011. The decrease was primarily due to
unfavorable changes in working capital. “Last quarter and then again a month ago at
MINExpo, we discussed economic and geopolitical headwinds facing the world, and we
are certainly continuing to see the impact of those uncertainties in our business,” said
Caterpillar Chairman & CEO Doug Oberhelman. “Even so, we had a record third quarter, and our entire organization is
focused on finishing 2012 as the best year for sales and profit in our history,” Oberhelman added. “Despite the
turbulence in the global economy, we continue to track toward our goals on cost control, margin improvement, product
quality, safety and better product availability for our customers.” The previous outlook for sales and revenues was a
range of $68 to $70 billion. The decline in the sales and revenues outlook reflects global economic conditions that are
weaker than Caterpillar had previously expected. In addition, CAT dealers have lowered order rates well below enduser demand to reduce their inventories. Production across much of Caterpillar has been lowered, resulting in
temporary shutdowns and layoffs. Lower production will continue until inventories and dealer order rates move back in
line with dealer deliveries to end users. The reduction in the profit outlook is in line with lower sales and revenues
outlook, partially offset by gain on the sale of a majority interest in CAT’s third party logistics business. “As we've
moved through the year, we've seen continued economic weakening and uncertainty. It's definitely impacting our
business with dealers intending to lower inventories and mining customers delaying some projects and reducing
orders,” Oberhelman said. “We're focused on being very nimble and taking actions to respond to the current
environment while at the same time keeping our 2015 goals and expectations in mind. It requires a pragmatic and
steady approach as we balance our actions in the short term with what we need to do to be prepared for better growth
when the world economy improves,” Oberhelman added.
From an economic standpoint, Caterpillar is expecting slightly better world growth in 2013 with modest improvement in
the United States, China and most of the developing world, but continuing difficulty in Europe. Based on CAT’s
economic forecast, Caterpillar’s preliminary outlook for 2013 is for sales and revenues to be about the same as 2012
in a range of up 5% to down 5%. “We are taking a pragmatic view of 2013—we're not expecting rapid growth, and
we're not predicting a global recession. At this point, we expect 2013 sales will be similar overall to 2012, but with a
slightly weaker first half and a slightly better second half. While machine deliveries to end users have continued to hold
up, our sales will probably remain relatively weak early in 2013 as dealers are likely to continue reducing inventories.
When expected dealer inventory reductions level off, and easing actions by central banks and governments around
the world begin to improve economic growth, we expect our business will begin to improve. While there's reason for
optimism, and we're not expecting a global recession in 2013, we are prepared and stand ready to take action no
matter what happens to the global economy,” Oberhelman added. The 2012 outlook reflects sales and revenues of
about $66 billion. The previous outlook was a sales and revenues range of $68 to $70 billion. Capital expenditures for
2012 are expected to be less than $4 billion—with about half invested in the United States. The outlook for 2012
represents the highest sales and revenues and profit in Caterpillar history, exceeding last year’s record results.
Power Systems’ sales were $5.317 billion in the third quarter of 2012, an increase of $242 million, or 5%, from third
quarter 2011. The improvement was the result of acquisition of MWM, higher volume and improved price realization,
partially offset by impact of currency. Excluding acquisition of MWM, Power
Systems’ sales were about flat. Sales increased in Asia/Pacific and were partially
offset by decreases in EAME - including Europe, Africa, the Middle East and the
Commonwealth of Independent States (CIS). Worldwide demand for energy, at
prices that encouraged investment, resulted in higher sales of engines and turbines
for petroleum applications. Sales for electric power products also increased due to
higher demand for large applications. These increases were offset by lower sales
for industrial power applications. Power Systems’ profit was $943 million in third
quarter 2012 compared with $794 million in third quarter 2011. The increase was
primarily due to higher sales volume, which includes impact of a favorable mix of
products, and improved price realization. Improvements were partially offset by
increased SG&A and R&D expenses. Manufacturing costs were about flat. MWM, acquired during fourth quarter 2011,
added sales of $143 million, primarily in EAME, and increased segment profit by $17 million.
www.marcon.com
25
In the outlook that Caterpillar released with their year-end 2011 financial results in January, CAT expected world
economic growth of about 3.3% in 2012. Caterpillar’s revised outlook assumes 2012 world economic growth of 2.5%,
the weakest year for growth since 2009. From an economic standpoint, 2012 has been a disappointment with lower
than expected growth in the United States and China, and with much
of Europe in recession. While governments and central banks around
the world have been easing policies, it is now evident that these
actions have not been sufficient to benefit 2012 growth. CAT has
lowered their outlook for 2012 and now expect sales and revenues of
about $66 billion. The previous outlook was a sales and revenues
range of $68 to $70 billion. The decline in the sales and revenues
outlook is a result of two main factors: Lower demand – while dealer
machine deliveries to end users continue to improve compared with
2011, the rate of improvement is lower than CAT expected, primarily
a result of slower than expected economic growth throughout much
of the world; and over the past quarter, dealers lowered order rates to levels that are well below their deliveries to end
users. This suggests they intend to lower inventories in the fourth quarter and into 2013. As a result, Caterpillar is
lowering production levels until inventories and order rates from dealers move back in line with dealer deliveries to end
users.
While most countries have eased monetary and credit policies over the past year, and CAT expect continued easing in
2013, growth has been slow to respond. As a result, Caterpillar is not expecting improvement in overall economic
growth until second half 2013. Caterpillar is expecting 2013 economic growth of about 2.7%, up slightly from the 2.5%
growth CAT expects for 2012. Average interest rates in developed countries are already below the lows reached
during the financial crisis, so prospects for lower rates are limited. However, Caterpillar expects central banks in the
larger economies to inject additional liquidity into banking systems to help drive increased lending. CAT expects that
additional increases in liquidity along with measures to encourage bank lending will drive more credit and spending
growth. Since the year will likely start weak, Caterpillar is only expecting economic growth in developed economies of
about 1.5% in 2013, with some upside potential. In the United States, the
Federal Reserve’s new emphasis on employment, along with signs that
banks are increasingly willing to lend, are positives for private sector
economic growth. Overall, Caterpillar expects about 2% economic growth
in the United States for 2013. U.S. construction activity, which is coming off
a 30-year low, is expected to fare better in 2013. Low mortgage interest
rates, increasing employment and a near record low inventory of new
homes will likely lead to an improvement in housing starts to about 950
thousand units in 2013. Caterpillars expect nonresidential construction will
benefit from lower vacancy rates, aging stocks and favorable interest rates.
CAT does not see signs that governments in the Eurozone and the
European Central Bank will change economic policies to deal with recession, record unemployment and social unrest.
Consequently, Caterpillar expects only marginal growth in 2013, and construction activity will likely remain weak. The
Bank of Japan is facing increased pressure to aggressively battle deflation, and Caterpillar expects it will increase
liquidity further. However, recent economic weakness is likely to persist well into 2013, resulting in economic growth
below 1.5%. Caterpillar expects low interest rates will benefit construction in Australia, but mining investment is likely
to slow. CAT expect less than 3% economic growth in Australia for 2013.
Developing economies, while slowing, have fared better than developed economies and are expected to respond
more favorably to recent policy easing. Caterpillar expects growth in these countries will improve more than a half
percentage point in 2013 to around 5.5%. In China, banks have
been increasing lending, and the government announced
acceleration of infrastructure programs. CAT expects additional
easing in 2013 and project economic growth will improve to 8.5%.
Construction activity and demand for commodities will likely
increase. Caterpillar expects economic growth in other Asian
countries will improve as well, on average about a half
percentage point. Better growth should benefit construction. Economic growth in Latin America is expected to improve
to almost 4% in 2013, driven primarily by a rebound in Brazil. Economic growth in Africa, the Middle East and CIS
should be around 4%. Slightly better world economic growth and higher commodity prices should benefit these
regions.
www.marcon.com
26
Better world economic growth is expected to improve demand for most metals. Caterpillar believes the softness in
2012 prices occurred in response to weaker demand, not excessive supply capacity. Consequently, CAT’s outlook
assumes copper prices will increase from an average $3.60 per pound in 2012 to
$3.75 in 2013. China port iron ore prices are expected to increase from $130 per
metric ton in 2012 to $135 in 2013 as steel production increases. Abundant supplies of
natural gas at low prices will likely continue to pressure U.S. coal demand and prices in
2013. Caterpillars expect Central Appalachian coal prices to average about $65 per
ton in 2013, up slightly from an average of $63 per ton in 2012. CAT expects prices in
other countries will follow similar patterns, and Australian thermal coal should increase
from $94 per metric ton in 2012 to $98 in 2013. Caterpillars expect oil demand next
year will grow at about half the rate of overall economic growth. Worldwide production
is at a record high, and producers should be able to accommodate the increase in
demand expected in 2013 without tightening supplies. Caterpillar projects Brent crude
oil will average about $110 per barrel, or about the same as in 2012. The West Texas Intermediate oil price should
increase slightly to near $100 per barrel as the ability to send more oil to the Gulf of Mexico is reducing local surplus
supplies.
Caterpillar believes that the Eurozone is the most significant risk to its 2013
economic outlook. Economic policies in Europe have led to another
recession and intensified pressure on the Euro. In addition to concerns about
growth, it believes there is risk that some countries may pull out of the Euro.
The United States faces substantial economic risk as tax increases and
government spending cuts will occur unless the government acts to prevent
them from taking effect. While CAT expects that the government will act, the
longer it takes and the more divisive the solution, the more it will hurt
business and consumer confidence. In assessing the last two years,
Caterpillar concluded the financial crisis left many economies in fragile
condition and that quickly raising interest rates once the recovery started was
a bad idea. Although most central banks retreated, the impact contributed to a decline in world economic growth from
about 4% in 2010 to less than 2.5% in 2012. Business confidence deteriorated and another round of investment
cutbacks is beginning. Caterpillar is concerned that central banks will be too quick to raise interest rates when growth
improves, again preventing the world economy from completely recovering from the financial crisis.
As Caterpillar expects 2013 sales and revenues to be about the same as
2012 in a range of up 5% to down 5%, at the middle of that range Resource
Industries’ sales are expected to be down in 2013. Declines in metals and
coal prices along with increasing operating costs have hurt profit margins at
many mining companies. Profit pressure combined with economic
uncertainty has resulted in mining companies delaying investment. Although
metals prices recently improved, Caterpillar expects companies will reduce
capital spending in 2013 and sales of mining equipment will decline. CAT
expects Construction Industries’ sales will improve in 2013. Caterpillar is
expecting improving activity in the United States, sales growth in China
coming off low levels in 2012 and continued improvement in other developing
countries. CAT expects these improvements to be partially offset by continuing weakness in Europe and dealer efforts
in much of the world to lower inventories. Caterpillar remains very positive on long-term industry growth in China and
their strategy to grow their business there. Plans for the remainder of 2012 reflect a continued orderly ramp down of
production that considers their entire supply chain in China. Given the current
low rate of sales and the production ramp down, it will likely take the rest of
2012 and continuing into 2013 to reduce inventory to levels more in line with
sales. While the industry is down and will likely remain down for the balance of
2012, Caterpillar is encouraged by recent actions that the Chinese government
has taken to improve growth. They have lowered bank reserve requirements,
increased infrastructure investment and have cut interest rates. Caterpillar
expects they will continue to ease policy to help improve growth in their
economy. Those actions will likely lead to better growth in the construction
industry in 2013, although Power Systems’ sales are expected to be relatively
flat with 2012.
www.marcon.com
27
GE third-quarter 2012 Operating Earnings of $3.8 billion, up 10% and 50% respectively from third
quarter 2011. GAAP earnings from continuing operations were $3.5 billion, or $0.33 per share (up
43%). Revenues were $36.3 billion for the quarter, up 3%, and up 6% excluding FX. Industrial
segment revenues grew by 6%, with organic growth of 8%. The strength of GE’s Industrial
portfolio was evident. All Industrial segments had positive earnings growth for the first time since
the third quarter of 2005; Energy Infrastructure, Transportation and Home & Business Solutions
had double-digit earnings growth. “The overall environment remains challenging, but GE
continues to execute on our growth strategy,” said GE Chairman and CEO Jeff Immelt. “GE’s Industrial segments
delivered another quarter of strong organic revenue growth, and we ended the quarter with a
robust backlog. As expected, our margins increased 70bps over the prior year period, with
margin expansion in all five Industrial segments.” Infrastructure orders were $21.5 billion, down
5% primarily driven by a decrease in orders for wind turbines. Orders were up 4% excluding the
effects of Wind and FX. Year-to-date orders were up 4%, with four out of five Infrastructure
businesses showing growth. Total revenues for the quarter were $36.3 billion, up 3%. GE’s
third-quarter Industrial segment revenues were $24.8 billion, up 6%.
Industrial segment organic revenues were up 8% for the quarter and
10% year-to-date. Industrial segment growth market revenues were up 9%, excluding FX,
driven by double-digit growth in China, Latin America, and Africa. GE expects seven of nine
growth regions to have double-digit orders growth in 2012. GE Transportation Reported $1.4
billion, up 9% versus third quarter 2011 in revenues and 24% year-over-year. Segment profits
were $265 million, up 35% from $197 million in third quarter 2011. GE Transportation’s orders
in the third quarter rose 21% to $1.2 billion, driven by locomotive orders from international
customers. GE Transportation is also providing four GE 8L250 diesels for two newbuilding 120’
ASD tugs on the U.S. West Coast.
Cummins Inc. of Columbus, Indiana reported third quarter revenue of $4.1 billion decreased 11%
from the same 2011 quarter. Revenues in North America grew 2% while revenues from international
markets declined 21%. Earnings before interest and taxes (EBIT) were $496 million or 12.0% of sales
compared to $640 million or 13.8% of sales in the third quarter of 2011. “Demand has dropped sharply
over the last three months, reflecting a high degree of uncertainty among customers in most
geographic markets,” said Tom Linebarger, Chairman and CEO. “We have been responding to the
conditions by delaying or cancelling projects, flexing production at some of our manufacturing plants,
reducing discretionary expenses, and reducing our workforce by 1000 to 1500 people by the end of this year. We are
continuing to fund projects that are important for future growth and meeting commitments to customers. We are
working to respond to the conditions now to ensure the long term strength of the company and to best serve the many
stakeholders who rely on Cummins long term success.” Based on the current forecast, Cummins expects full year
revenues to be $17 billion, with EBIT region 13.5% of sales. Cummins’ engine segment reported sales of $2.5 billion,
down 14% with a lower segment EBIT of $239 million, or 9.5% of sales compared to $349 million or 11.8% of sales
during the same 2011 period. This was primarily due to lower demand in North American heavy duty truck, medium
duty truck, oil and gas and mining markets, lower demand for trucks in Brazil and in the construction market in China
offset stronger demand for light duty truck and construction engines in North America.
Tognum AG confirmed its forecast for the full year 2012 at the end of the first nine months.
The adjusted EBIT margin is expected to be at around 10% by the end of the year, while
Tognum expects to see revenue growth in the lower single-digit percentage range. “The
global economy cooled down further in the third quarter. As a result of our good order
backlog, however, we are aiming for a fourth quarter slightly above last year’s level and
therefore, from today’s perspective, we confirm our revenue and profit targets,” explained Joachim Coers, CEO of
Tognum AG. “The fourth quarter, however, will be real challenge for the entire company.” Order intake at the end of
the first nine months of the year was on a solid level at €2,296.3 million (Q1-Q3 2011: €2,382.3 million). Revenues
were up 1.7% compared with the same period last year to €2,092.7 million (Q1-Q3 2011: €2,057.7 million). Revenues
in the Engines segment amounted to €1,409.6 million (Q1-Q3 2011: €1,395.5 million). There was a strong increase in
revenues in the Oil & Gas application area, primarily as a result of the increase in investing activities due to past
increases in prices for raw materials. Increased revenues were also reported in the Defense application area due to
several projects coming to an end. Business in government vessels in the Marine application experienced a project
related decline. In the Industrial application area, business in rail engines, as expected, was weaker, following a boom
in 2011 relating to tougher emission regulations. After Sales business remained stable at a high level. The adjusted
segment EBIT at the end of the first nine months of the year amounted to €161.9 million (Q1-Q3 2011: €200.1 million).
www.marcon.com
28
As of 20th November 2012, MarineLog and Tim Colton reported 33 tugs on the order books in the U.S., the same as
reported in both the May and August Market Reports. At this same time, Lloyd’s reports 14 “sea-going” U.S. flag tugs
on the books.
Shipbuilder
Location
Type
Customer
Name
Description
Contract
Price ($mm)
Contract
Delivery
Bollinger SY
Amelia LA
Ocean Tug
Crowley Maritime
Ocean Sun
10,880 HP
3Q12
Bollinger SY
Amelia LA
Ocean Tug
Crowley Maritime
Ocean Sky
10,880 HP
1Q13
Chesapeake SB
Salisbury MD
Tug
Vane Brothers
3,000-HP
2013
Chesapeake SB
Salisbury MD
Tug
Vane Brothers
3,000-HP
2013
Dakota Creek Ind
Anacortes WA
ATB Tug
Crowley Marine
16,320 HP
Mar-13
Diversified Marine
Portland OR
Tug
Shaver Towing
5,360 HP
2012
Diversified Marine
Portland OR
Tug
Harley Marine
Foss SY
Rainier OR
Tug
Foss Maritime
2014
Foss SY
Rainier OR
Tug
Foss Maritime
2014
Foss SY
Rainier OR
Tug
Foss Maritime
2015
Great Lakes SY
Cleveland OH
ASD Tug
Caribbean Tugs
4,640 HP
12
2013
Great Lakes SY
Cleveland OH
ASD Tug
Caribbean Tugs
4,640 HP
12
2013
Leevac Shipyards
Jennings LA
Escort Tug
Bay Houston Towing
80 ft.
Jun-13
Leevac Shipyards
Jennings LA
Escort Tug
Suderman & Young
80 ft.
Sep-13
Main Iron Works
Houma LA
Tractor Tug
Bisso Towboat
4,000 HP
2012
Main Iron Works
Houma LA
Tractor Tug
Dann Marine
3,000 HP
Martinac SB
Tacoma WA
Tug
Pacific Tugboat Svcs.
Menominee
Nichols Bros. BB
Freeland WA
Tug
Harley Marine
Nichols Bros. BB
Freeland WA
Tug
Harley Marine
Raymond Assoc
Bayou La Batre AL
Tug
Raymond Assoc
Bayou La Batre AL
Tug
SENESCO
North Kingston RI
ATB Tug
Reinauer Tptn.
2012
SENESCO
North Kingston RI
ATB Tug
Reinauer Tptn.
2012
SENESCO
North Kingston RI
Tractor Tug
McAllister Bros.
Signal
International
Signal
International
Signal
International
Signet SB
Orange TX
ATB Tug
Orange TX
ATB Tug
Orange TX
Washburn
Doughty
Washburn
Doughty
Washburn
Doughty
Washburn
Doughty
Western Towboat
Liberty
Bob Franco
2012
3,620-HP
2012
Robert Franco
100 ft.
2013
Ahbra Franco
100 ft.
2013
North Bank Towing
6,000 HP
2012
North Bank Towing
6,000 HP
2012
Eric M. McAllister
5,150 HP
2013
Kirby Ocean Tpt.
6,000 HP
May-12
Kirby Ocean Tpt.
6,000 HP
Dec-12
ATB Tug
Great Lakes Dredge
14,000 HP
Jun-14
Pascagoula MS
Tug
Signet Maritime
Signet Magic
5,150-HP
May-13
East Boothbay ME
Tug
Moran Towing
James Moran
5,000 HP
2012
East Boothbay ME
Tug
Moran Towing
5,100 HP
2012
East Boothbay ME
Tug
Moran Towing
5,100 HP
2012
East Boothbay ME
Tug
Moran Towing
5,100 HP
2012
Seattle WA
Tug
Western Towboat
6,000 HP
Mar-12
Arctic Titan
www.marcon.com
29
The Economy and the Towing Industry
We are a month away from the U.S. “fiscal cliff”. I am tired of the daily in-fighting and
wrangling between politicians and second-guessing by the media. To paraphrase
Shakespeare, “a plague a’ both your houses,” or parties in this instance. I sometimes
wonder if, regardless of the consequences, we should just fall off that mythical cliff and see
if we have the ability to pick up the pieces afterwards and put them in the right order.
Nevertheless, when I cool down, I hope that we do not come to that. Our lawmakers should
be able to come up with a realistic solution that restores confidence to consumers and
investors alike, while avoiding the “law of unintended consequences” in whatever they do. It
sounds like I am asking for a miracle, but we need long-term economic continuity vs. just a
short-term juggling of numbers behind the scenes and “cooking-the-books” so the
lawmakers can all go home and enjoy their Christmas holidays.
The International Monetary Fund says that prospects are for a sluggish and bumpy growth. They project 3.3% global
growth for 2012 and 3.6% for 2013 year-over-year – assuming the U.S. manages to dodge that “fiscal cliff”. I do not
mind sluggish growth if that growth has a solid foundation we can build upon. As to a bumpy road ahead – that is
something we are used to at Marcon after 32 years. The S&P market is slower than we, of course, would like, but at
least we are still here, have not let anyone go and definitely topped IMF’s growth projections for 2012. Regardless of
the politicians, wherever they may be and whatever they may do, we are working towards a better 2013.
According to the latest International Monetary Fund “World Economic Outlook”, the
recovery continues, but it has weakened. In advanced economies, growth is now too low to
make a substantial dent in unemployment. Growth that was strong earlier in major emerging
market economies has also decreased. Relative to their April 2012 forecasts, IMF forecasts
for 2013 growth have been revised from 1.8% down to 1.5% for advanced economies, and
from 5.8% down to 5.6% for emerging market and developing economies. The downward
revisions are widespread, however, are stronger for the euro zone, where the IMF expects
growth in 2013 to be close to zero, and for the three of large emerging market economies of
China, India, and Brazil with Brazil having one of the IMF’s largest downward revisions. The
world economy continues to be interconnected through trade and flow of capital and the low
growth encountered in advanced economies affects emerging and developing economies
across the globe due to declining exports.
Global manufacturing is down and industrial
production has again sharply fallen in most
economies along with world trade. The International
Monetary Fund projects the average of annual
percent change for world trade volume in goods,
both exports and imports, to be +4.6% in 2013 after
3.4% during 2012, but still below the average of
7.1% annual average achieved during 1994-2003
and the 5.2% average from 2004-2013. In U.S.
dollars, the projections for 2012 and 2013 are
expected to decline 2.1% and 0.7% respectively.
Further downside risks to the economy have
increased since early this year. There is now a 1 in 6
chance of global growth falling below 2%, which
would be consistent with a recession in advanced
economies and low growth in emerging market and
developing economies. The crisis in the euro area is
the most obvious threat to global outlook, but if U.S.
legislators do not remove the threat of the fiscal cliff,
the U.S. economy could fall back into recession,
with further spillovers to the rest of the world.
www.marcon.com
30
The health of the world’s economy continues to deteriorate as insufficient
demand, unemployment and the on-going debt crisis in Europe
undermine recovery efforts, results of the International Chamber of
Commerce -Ifo World Economic Survey (WES), released on 15th
November, revealed. Based on findings from the survey, which assessed
the views of 1,156 experts in 124 countries across the globe, the World
Economic Climate Indicator fell for the second consecutive quarter,
dropping from 85.1 to 82.4 in Q4. Although the dip is less pronounced than in the previous quarter, it reveals that
hopes of an economic recovery seen in Q2, when the climate indicator stood at 95, have suffered a further setback.
The survey, conducted by the Munich-based Ifo Institute for Economic Research and the International Chamber of
Commerce, shows the World Economic Climate Indicator in Q4 2012 standing well below the long term average of
96.7 (1996 – 2011). This latest fall is due to less favorable assessments of the current economy and lower
expectations for the six-month economic outlook. “By late 2012, economic activity lost momentum in nearly all regions
of the world,” said ICC Secretary General Jean-Guy Carrier. “A clear factor in this is the on-going debt crisis in the
Euro area, which governments will have to get to grips with in order to restore investor confidence.” The global
economy continues to be affected by the struggling economies in the Euro area. With the debt crisis continuing to
blight economies of member states like Greece, Portugal and Spain, the indicator for the Euro area currently stands
well below the long term average of 109.0 (1996 – 2011). Public deficits, insufficient demand and unemployment are
the chief causes of the Euro area’s on-going economic difficulties. With WES experts lowering economic expectations
for the next six months they suggest there is no sign of any light at the end of the tunnel for the Euro area. In North
America, the fall in the economic climate indicator was less marked than in Europe, owing
largely to more positive expectations for the U.S. economy. Asia’s economy also continued
a downward trend seen in Q3, though at a slower rate. Latin America was the only major
continent to go against the trend, with the economic climate indicator rising in the fourth
quarter of 2012 due to improved expectations for the economy for the next six months.
Gernot Nerb, Ifo Director of Business Surveys, said the strength of the indicator in Latin
America can partly be put down to increased competitiveness of the region’s currencies.
“The positive signals from Latin America may be partly explained by the fact that some of
the region’s currencies are no longer overvalued and some are even undervalued,
compared to the US dollar, the euro, the pound and the yen,” said Mr. Nerb. “This helps
somewhat to increase international price competitiveness. On top of this, the interregional
trade in Latin America appears to have picked up somewhat which may also explain part of
the improvement of the business climate in this region.”
The global economy is expected to make a hesitant and uneven recovery over the coming two years. Decisive policy
action is needed to ensure that stalemate over fiscal policy in the United States and continuing euro area instability do
not plunge the world back into recession, according to the Organization for Economic Co-operation and
Development’s latest Economic Outlook. “The world economy is far from being out of the woods,” OECD SecretaryGeneral Angel Gurría said during the Economic Outlook launch
in Paris on 27th November. “The US ‘fiscal cliff’, if it
materializes, could tip an already weak economy into
recession, while failure to solve the euro area crisis could lead
to a major financial shock and global downturn. Governments
must act decisively, using all the tools at their disposal to turn
confidence around and boost growth and jobs, in the United
States, in Europe, and elsewhere,” Mr. Gurría said. GDP
growth across the OECD is projected to match this year’s 1.4%
in 2013, before gathering momentum to 2.3% for 2014,
according to the Outlook. After softer-than-expected activity
during 2012, growth has begun picking up in emerging-market
economies, with increasingly supportive monetary and fiscal
policies offsetting the drag exerted by weak external demand.
China is expected to grow at 8.5% in 2013 and 8.9% in 2014, while GDP is also expected to gather steam in the
coming years in Brazil, India, Indonesia, Russia and South Africa. Labor markets remain weak, with around 50 million
jobless people in the OECD area. Unemployment is set to remain high, or even rise further, in many countries unless
structural measures are used to boost near-term employment growth. The euro area crisis remains a serious threat to
the world economy, despite recent measures that have dampened near-term pressures. Adjustment of deep-rooted
imbalances across the euro area has begun, but much more is needed to ensure long-term sustainability, including
structural reform in both deficit and surplus countries.
www.marcon.com
31
Total nonfarm payroll employment rose by 146,000 in November, and the unemployment rate edged down to 7.7%,
the U.S. Bureau of Labor Statistics reported recently. Employment increased in retail trade, professional and
business services, and health care. The number of unemployed persons, at 12.0 million, changed little. The number of
long-term unemployed, those jobless for 27 weeks or more, was little changed at 4.8 million in November. These
individuals accounted for 40.1% of the unemployed. The civilian labor force participation rate declined by 0.2% point to
63.6% in November, offsetting an increase of the same amount in October. Total employment was about unchanged in
November, following a combined increase of 1.3 million over the prior 2 months. The employment-population ratio, at
58.7%, changed little in November. The number of persons employed part time for economic reasons (sometimes
referred to as involuntary part-time workers), at 8.2 million in November, was little changed over the month. These
individuals were working part time because their hours had been cut back or because they were unable to find a fulltime job. In November, 2.5 million persons were marginally attached to the labor force, essentially unchanged from a
year earlier. These individuals were not in the labor force, wanted
and were available for work, and had looked for a job sometime in
the prior 12 months. They were not counted as unemployed because
they had not searched for work in the 4 weeks preceding the survey.
Among the marginally attached, there were 979,000 discouraged
workers in November, little changed from a year earlier. Discouraged
workers are persons not currently looking for work because they
believe no jobs are available for them. The remaining 1.5 million
persons marginally attached to the labor force in November had not
searched for work in the 4 weeks preceding the survey for reasons
such as school attendance or family responsibilities. Employment in
wholesale trade edged up over the month (+13,000). Since reaching an employment trough in May 2010, the industry
has added 228,000 jobs. Employment in construction declined by 20,000 in November, with much of the loss occurring
in construction of buildings (-11,000). Since early 2010, employment in construction has shown no clear trend.
Manufacturing employment changed little over the month. Within the industry, job losses in food manufacturing (12,000) and chemicals (-9,000) more than offset gains in motor vehicles and parts (+10,000) and wood products
(+3,000). On net, manufacturing employment has changed little since this past spring. Employment in other major
industries, including mining and logging, transportation and warehousing, financial activities, and government, showed
little change in November. While the official unemployment rate is finally down to 7.7%, if you include 8.2 million
“involuntary part-time workers for economic reasons” who are unable to find a full time job or hours were cut back, the
2.5 million not counted because they had not looked for work in four weeks and 979,000 “discouraged workers” who
gave up, the U.S. still has about 23.68 million, or 15.2% of the 155.291 million civilian workforce, either unemployed or
under-employed – which is an improvement over the 27.9 million (18.12%) un- or under-employed in November 2010.
The euro area (EA17) seasonally-adjusted unemployment rate3 was 11.7% in October 2012, up from 11.6% in
September. The EU27 unemployment rate was 10.7% in October 2012, up from 10.6% in September. In both zones,
rates have risen markedly compared with October 2011, when they were 10.4% and 9.9% respectively. These figures
are published by Eurostat, the statistical office of the European Union. Eurostat estimates that 25.913 million men and
women in the EU27, of whom 18.703
million were in the euro area, were
unemployed in October 2012. Compared
with September 2012, the number of
persons unemployed increased by
204,000 in the EU27 and by 173,000 in
the euro area. Compared with October
2011, unemployment rose by 2.160
million in the EU27 and by 2.174 million in
the euro area. Among the Member States,
the lowest unemployment rates were
recorded in Austria (4.3%), Luxembourg (5.1%), Germany (5.4%) and the Netherlands (5.5%), and the highest in
Spain (26.2%) and Greece (25.4% in August 2012). Compared with a year ago, the unemployment rate increased in
sixteen Member States, fell in nine and remained stable in Austria and Slovenia. The largest decreases were observed
in Estonia (11.5% to 9.6% between September 2011 and September 2012), Lithuania (14.2% to 12.4%) and Latvia
(15.7% to 14.2% between the third quarters of 2011 and 2012). The highest increases were registered in Greece
(18.4% to 25.4% between August 2011 and August 2012), Cyprus (9.2% to 12.9%), Spain (22.7% to 26.2%) and
Portugal (13.7% to 16.3%).
www.marcon.com
32
According to the World Bank, despite slower growth, Latin America is nearing historic
unemployment lows. This year, the Latin America and the Caribbean region (LAC) will be growing at
3.0%, more in line with global trends. But even with GDP beginning to slow, the region’s
unemployment rate stood at 6.5% last year, approaching historic lows and well below its peak of
11% a decade ago, according to the latest semiannual report by the World Bank’s Office of the Chief
Economist for the region. Current consensus forecasts envisage that Latin America’s GDP will grow
at 3.8 to 4% in 2013, after having expanded 6% in 2010 and 4% in 2011. This new phase reflects a
significant slowdown in two of the largest economies in the region. Argentina and Brazil are projected to grow in 2012
by 2% or less. Still, many countries in the region are projected to grow above the regional average, including Bolivia,
Colombia, Costa Rica, Chile, Dominican Republic, Ecuador, Mexico (whose recovery lagged behind others in the
region but is now gaining momentum), Uruguay and Venezuela. Panama and Peru continue to be the top growth
performers in the region in 2012, with Asia-like growth rates of 8 and 6% respectively. “Global and internal factors are
behind the region’s slowdown. On the one end, you find weaker economic activity in important growth pols, such as
Europe and China, which has a negative impact in the demand for LAC exports. On the other, many middle income
countries appear to have been running at their full growth capacity in 2010-2011,” said World Bank’s Chief Economist
for the region, Augusto de la Torre. Among key findings is the fact that more than 35 million additional jobs were
created in the 2000s.
Real gross domestic product -- the output of goods and services produced by labor and
property located in the United States -- increased at an annual rate of 2.7% in the third
quarter of 2012 (that is, from the second quarter to the third quarter), according to the
“second” estimate released by the Bureau of Economic Analysis. In the second quarter,
real GDP increased 1.3%. The increase in real GDP in the third quarter primarily reflected
positive contributions from personal consumption expenditures (PCE), private inventory investment, federal
government spending, residential fixed investment, and exports that were partly offset by negative contributions
from nonresidential fixed investment and state and local government spending. Imports, which are a subtraction in
the calculation of GDP, increased slightly. The acceleration in real GDP in the third quarter primarily reflected
upturns in private inventory investment and in federal government spending, a deceleration in imports, an
acceleration in residential fixed investment, and a smaller decrease in state and local government spending that
were partly offset by a downturn in nonresidential fixed investment and decelerations in exports and in PCE.
The volume of world trade increased 0.8% in September 2012 month-onmonth, following a revised increase of 0.0% or stagnation in August. This is
shown by the CPB World Trade Monitor. Trade ended up down 0.2% in the
third quarter, following a 0.5% increase in the second. World industrial production was down 0.4% month-on-month in
September, again following stagnation in August. Third quarter’s world industrial production was up 0.3% in
September following a 0.1% increase in the second. The global economy is slowing down, and most seriously in the
Eurozone. Growth in international trade has declined during first half 2012. The disappointing growth in international
trade has mostly been due to a sharp decline in Eurozone imports. The slow-down has been most pronounced in this
region, but in emerging economies, such as those of China, India and Brazil, production growth is also slowing due to
reduction in export and lower domestic spending. In the U.S., growth is expected to increase slightly, compared with
2011, to 2¼% in 2012 and 2013. This assumes that agreement is reached on continuation of a number of fiscal
measures before end 2012. If agreement fails, more severe spending cuts will result in the U.S., with a further
dampening effect on global economic growth. International trade is expected to recover to a certain extent in the
second half of 2012 and in 2013.
According to the Container Trades Statistics team in the U.K., October was another bad month
for the shipping community. World trade of containerized cargo deteriorating by 1.5% compared to
September, down to 10,466,100 TEU, or 6.5% compared to May’s peak of 11,193,600 TEU. The
economic slowdown of developed countries remained stubbornly in place, further confirming that
the cargo growth registered earlier in the year was just a “false dawn”. The U.S., in particular, is still confronted by a
fiscal cliff, and Europe has yet to make a serious dent in the level of its mounting sovereign debt. Stock Exchanges
around the world may be bouncing high, but the improved company financial results responsible for it appear to mainly
reflect artificially reduced borrowing costs stimulated by Quantitative Easing. Sales growth in developed countries is an
elusive target. The trading picture is worse than it seems, as October is still a peak period for Europe and the US, so
should have experienced growth, although volumes were affected by “Golden Week” in early October, the annual
build-up of Christmas goods has slowed. Instead, containerized goods shipped from all overseas countries to North
America fell by 3.7% compared to September, down to 1,795,500 TEU, or 5% compared to May’s peak of 1,890,800
TEU, and that to Europe fell by 4.5%, down to 1,623,300 TEU, or 10.5% compared to May’s peak of 1,823,300 TEU.
www.marcon.com
33
Cargo throughput in the Port of Rotterdam increased by 1.7% to 333 million tons during the first
nine months of 2012. Growth is attributed completely to exports: incoming cargo was flat (0%),
while outgoing cargo rose 7%. ThrougHPut of crude oil (+6%), mineral oil products (+13%), other
liquid bulk (+5%), containers (+2%) and roll on/roll off (+2%) increased. Less agribulk (-15%), iron
ore and scrap (-16%), coal (-5%), other dry bulk (-8%), LNG (-6%) and other general cargo (-24%)
was loaded and unloaded. Dry bulk handling decreased by 11% to 58 million tons and liquid bulk
handling increased by 9% to 161 million tons. Hans Smits, CEO Port of Rotterdam Authority:
‘ThrougHPut in the port enjoyed a good third quarter mainly due to the oil sector. Growth weakened during the third
quarter due to declining world trade and while the corresponding quarter of 2011 was relatively strong. Across the
entire year, we still expect a small growth of approx. 1%”. The economic crisis has a clear effect on container
transport.
Port of Hamburg / Hamburger Hafen und Logistik AG increased container throughput in the
first nine months of 2012 by 1.9% to 5.4 million standard containers. Revenue fell by 7.2% to €
847.2 million due to restructuring of the Intermodal segment and changes in consolidation
methods. The operating result (EBIT) declined by 12.6% to € 143.8 million. “As we expected,
the economic environment continued to deteriorate over the course of the third quarter of
2012. On the basis of our performance to date we are nevertheless able to confirm our
forecast for the full year 2012,” said Klaus-Dieter Peters, Chairman HHLA. “We continue to expect container
throughput on par with last year and on this basis are aiming for revenue in the region of € 1.1 billion and an operating
result in the range of € 170 million to € 190 million.” ThrougHPut growth at HHLA container terminals in Hamburg and
Odessa slowed as forecasted over the first nine months, but was still up by 1.9%, with throughput of 5.4 million TEU.
Without non-recurring year-on-year effects, HHLA was able to improve
profitability in core business activities substantially in third quarter 2012
compared with the previous two, in particular due to improvements in cost
efficiency. In view of gloomier economic prospects HHLA reduced investment
volume originally planned for the 2012 financial year from € 250 million to
around € 200 million. Postponed investments relate mainly to capacity
increases in container throughput.
DP World Limited handled 14.2 million TEU across its portfolio of container terminals
in the third quarter 2012. This was 1% lower than the same period last year reflecting
the divestment of three joint venture terminals and a decline in volumes in the Europe,
Middle East and Africa region. Like for like gross container volume growth in the third
quarter was 0.5%. Gross container volumes continued to grow 4.5% in the first nine
months of the year driven by strong growth across the Americas, Asia Pacific, Middle East and UAE region. The UAE
region continued to increase the number of containers handled with 3.4 million TEU handled in the third quarter. This
takes its volumes in the first nine months of the year to 4.6% ahead of the same period
last year. DP World’s portfolio of consolidated terminals reported a 0.7% decline in
volumes in the third quarter as the Asia Pacific and Indian Subcontinent region and the
Europe, Middle East and Africa region reported a small decline in volumes. For the nine
months to 30 September, container volumes across their consolidated portfolio would
have increased 3.4% ahead of the same period last year had DP World’s terminals in
Australia not been deconsolidated from 12 March 2011.
As of the end of October 2012, the cumulative total number of containers handled at the Port of Hong
Kong decreased 4.4% to 19,432,000 TEUs compared to the same year earlier period. October’s
figures for the month itself were off 9.9% to 1,891,000 TEUs. Most of the decline in both instances were
at terminals other than thekWai Tsing Container Terminals. Total seaborne and river freight movements
for August 2012, the latest figures available, were 16,413,000 tons and 7,367,000 tons respectively.
Seaborne freight was at the lowest volume since April and down 5.1% year-on-year, while river trade hit a high for the
year and was up 7.8% compared to August 2011. Cumulative freight movements were 127,615,000 tons seaborne
and 53,026,000 river borne, falling 1.3% and 3.8% over 2011’s tonnages……While Ningbo Port’s container
throughput was up 20% in September 2012 compared a year ago, the figures declined in October over the previous
month due mainly to slowing demand from the United States……Shanghai International Port, the world’s busiest
container port, saw container volume increase 5.6% in September 2012, up 5.6% from September 2011 and also the
highest monthly volume over the last twelve months.
www.marcon.com
34
The preliminary estimate for total container throughput at Singapore’s Maritime and Port
Authority were 2,675.4 thousand TEUs up slightly from September, but still down from the over
2,700 thousand the previous four months. Total cargo, including containerized, conventional
general, petroleum and non-oil bulk cargoes were 44,743.7 thousand tons, down very slightly from
the previous month with most of the decline being in conventional general cargo. The record cargo
throughput for the year was in March 2012 with a total of 48,624.0 million tons.
Port Metro Vancouver in British Columbia reported a total 235,203 TEU container
traffic for October, up 9.25% over September’s figures. The accumulated number of
containers for the year through October were 2,259,316 TEU, up 8.3% over January –
October 2011’s 2,086,423 TEU. DP World Vancouver and DP World Nanaimo have
announced that, due to market demand, they will be implementing a new bi-weekly service to their Short Sea Shipping
barge service between Vancouver Island and Vancouver. The service was initially launched on a weekly schedule on
August 18, 2012. In January of this year, DP World and the Nanaimo Port Authority signed a three year agreement
that awards DP World Vancouver the right to operate Port of Nanaimo’s facilities, including Duke Point facility
Assembly Wharf.
Reports from the twelve U.S. Federal Reserve Districts in 28th November “The Beige
Book” indicate that overall economic activity expanded at a measured pace in recent
weeks. Weaker conditions in New York were attributed to widespread disruptions at
the end of October and into November caused by Hurricane Sandy. Philadelphia
reported general weakness exacerbated by the hurricane. Contacts in a number of Districts expressed concern and
uncertainty about the federal budget, especially the fiscal cliff. Among key sectors, consumer spending grew at a
moderate pace in most Districts, while manufacturing weakened, on balance. Seven Districts reported either slowing
or outright contraction in manufacturing, and two others gave mixed reports. In some cases, such as
high-tech equipment and steel production, an industry slowed in one District while strengthening in
another. Several Districts reported slight gains in residential and commercial real estate. In
transportation, reports were, again, mixed. In addition, hurricane disruptions slowed freight shipments
in some Districts, while simultaneously boosting demand for shipments of emergency supplies.
Reports on agricultural conditions were mixed, as drought conditions persisted in several Districts. In
the energy sector, extraction expanded on balance in San Francisco and activity remained at high
levels in the Minneapolis and Dallas Districts. However, there were fewer active oil rigs in Kansas
City, Dallas, and San Francisco. In addition, coal production fell in the Cleveland and Kansas City Districts. Most
Districts reported modest gains in hiring, while wage and price pressures remained mostly subdued. Employment
increased in more than half of the Districts. Wage growth was described as modest at best, constrained in part by an
abundant labor supply. However, a few Districts reported pockets of strength in wage growth, notably in North Dakota,
where oil drilling pushed up demand for workers, and in the Kansas City District, where wages were rising for
specialized workers in transportation, high-tech, and energy.
U.S. import volume in October, measured in TEUs, is down 6.8% from September and another 4.8% from October of
last year. According to Zepol Corporation, this is total of 1,433,446 containers imported. “Interestingly, low October
numbers were not always the case.” commented Zepol’s CEO Paul Rassmussen. “Looking at prerecession levels,
October had some of the highest TEU counts, but in 2011 and 2012, the holiday import-surge has shifted back to July
and August.” According to Rassmussen, U.S. imports will most likely decline as
the peak season ends for importers and consumption begins to wane.
Meanwhile, the U.S. saw a significant drop in imports from Asian countries by
over 5%. China, which accounts for over 60% of Asian exports to the U.S., fell
8.2% from September and 2.4% from October of 2011. Japan, on the other
hand, increased in TEUs to the United States by 14.2% from September and
increased from last October by 1.7%. Europe was a similar story to Asia, with
most countries seeing a drop in imports from September. Germany saw a
16.4% drop from September and Italy and Belgium decreased 7.3% and 19%,
respectively. The Port of Newark/New York also fell significantly from September by 24.8%. But the Port of Tacoma
actually saw an increase in TEUs of 2.3% and an even larger increase from last October by 36.3%. Most ocean cargo
carriers also saw a drop in October TEU imports from September. Top VOCC (vessel-operating common carrier),
Maersk Line, fell 13.5%, as well as Mediterranean Shipping Company by 9.6%. On the other hand, APL had a
significant rise in imports by 12% and even rose from October of 2011 by 13.6%. Overall, even though vessel imports
are down in October, total U.S. imports for the year are up 2.6%, compared with January through October of 2011.
www.marcon.com
35
The amount of freight carried in the United States by the for-hire transportation industry rose 0.2% in September from
August, after a one-month decline, according to the U.S. Department of Transportation's Bureau of Transportation
Statistics' (BTS) Freight Transportation Services Index (TSI) released. The September 2012 index level (109.2) was
15.8% above the April 2009 low during the recession. BTS reported that the level of freight shipments in September
measured by the Freight TSI (109.2) dropped 4.2% below the all-time high level of 114.0 in December 2011. BTS' TSI
records began in 1990. The Freight TSI measures the month-to-month changes in freight shipments by mode of
transportation in tons and ton-miles, which are combined into one index. The index measures output of the for-hire
freight transportation industry and consists of data from for-hire trucking, rail, inland waterways, pipelines and air
freight. The Freight TSI in September 2012 continued a pattern of little
change since January as some other indicators showed an uptick in
economic growth. GDP grew 2.0% in the third quarter, up from 1.3%
growth in the second quarter (though below 4.1% in fourth quarter 2011),
according to the Bureau of Economic Analysis. Employment grew by 0.6%
in September. Almost all freight modes experienced some increase in
September, but rail freight showed a significant decline. Since peaking in
December 2011 (114.0) at the highest level in the 22-year history of the
Freight TSI series, the index has remained in a narrow band during the
nine months of 2012. It reached a high of 110.6 in February and a low of
109.0 in August. After dipping to 94.3 in April 2009 during the recession,
freight shipments increased in 27 of the last 41 months, rising 15.8%
during that period. In April 2009, freight shipments were at their lowest level since June 1997 (92.3). Freight shipments
are up 1.0% in the five years from the pre-recession level of September 2007 and up 6.5% in the 10 years from
September 2002 despite declines in recent years. September 2012 freight shipments rose 0.1% from September 2011
and 11.5% from September 2009, which was in the trough of the recession, but remained below the level in
September 2006 (111.2) prior to the recession. The Freight TSI fell 0.3% in the third quarter following no change in the
second quarter (revised from -0.2) and a 3.9% decline in the first quarter. The index rose in two of the last six quarters
with the last quarterly increase in the fourth quarter of 2011.
The Association of American Railroads reported mixed weekly rail traffic for the week ending
November 24, 2012, with U.S. railroads originating 252,931 carloads, down 4.6% compared with the
same week last year. Intermodal volume for the week totaled 194,538 trailers & containers, up 1.9%
compared with the same week last year. Twelve of 20 carload commodity groups posted increases
compared with the same week in 2011, with petroleum products, up 63.6%; farm products excluding
grain, up 24.8%, and lumber & wood products, up 17.1%. Groups showing a decrease in weekly traffic
included metallic ores, down 24.7%; grain, down 16.7%, and coal, down 12.2%. For the first 47 weeks
of 2012, U.S. railroads reported cumulative volume of 13,290,121 carloads, down 3.1% from the same point last year,
and 11,137,923 trailers & containers, up 3.4% from last year. Canadian railroads reported carloads up 3.1% compared
with the same week last year, and trailers and containers, up 5.4% compared with 2011. For the first 47 weeks of
2012, Canadian railroads reported cumulative volume of 3,631,321 carloads, up 2.2% from the same point last year,
and 2,434,448 trailers & containers, up 6.9% from last year. Mexican railroads reported carloads up 8.6% compared
with the same week last year, and trailers & containers up 20.3%. Cumulative volume on Mexican railroads for the first
47 weeks of 2012 is up 0.6% compared with the same point last year, and trailers & containers, up 19.8% from last
year.
American Trucking Associations’ advanced seasonally adjusted (SA) For-Hire Truck Tonnage
Index decreased 3.8% in October after falling 0.4% in September. October’s drop was the third
consecutive totaling 4.7%. As a result, the SA index equaled 113.7 in October, the lowest level
since May 2011. Compared with October 2011, the SA index was off 2.1%, the first year-over-year
decrease since November 2009. Year-to-date, compared with the same period last year, tonnage
was up 2.9%. The not seasonally adjusted index, which represents change in tonnage actually
hauled by fleets before any adjustment, equaled 123.7 in October, which was 7.7% above the previous month. “Clearly
Hurricane Sandy negatively impacted October’s tonnage reading,” ATA Chief Economist Bob Costello said. “However,
it is impossible for us to determine the exact impact.” Costello noted that a large drop in fuel shipments into the
affected area likely put downward pressure on October’s tonnage level since fuel is heavy freight, in addition to
reductions in other freight. “I’d expect some positive impact on truck tonnage as the rebuilding starts in the areas
impacted by Sandy, although that boost may only be modest in November and December,” he said. “Excluding the
Hurricane impacts, I still think truck tonnage is decelerating along with factory output and consumer spending on
tangible-goods.” Trucking serves as a barometer of the U.S. economy, representing 67% of tonnage carried by all
modes of domestic freight.
www.marcon.com
36
Under U.S. law, vessel operators must report domestic waterborne
commercial movements to the U.S. Army Corps of Engineers.
October 2012’s 41.7 million short tons of all commodities moved on
internal U.S. Waterways was up 12.7% over September’s 37.0
million, but the lowest tonnage for the same month since 2009. 19.4
million short tons of petroleum & chemicals were carried in October
2102. This tied with October 2010 and was the highest monthly
tonnage in petroleum & chemicals moved since May 2007’s 20.4
million tons. Coal & Coke, at 14.2 million tons, hit a six month high,
while 3.53 million tons of farm & food products were moved. During
September, the volume of farm & food products moved was a record
low of 0.71 million tons due to effect of the drought on river traffic.
More information on the drought can be found on page 42.
Great Lakes St. Lawrence Seaway System’s total 2012 cargo through 31st October for Montreal
/ Lake Ontario and the Welland Canal was 29,503 thousand tons, up 1.4% from. Iron ore, coal and
general cargo were up with iron ore showing the greatest improvement from 7,080 to 8,491
thousand tons, while grain, dry & liquid bulk were off. Total transits were also down 6.1%.
According to the Lake Carriers’ Association, iron ore shipments on the Great Lakes totaled 5.5
million tons in October, a decrease of 6% compared to September, and 3.6% below the level of a
year ago. Shipments were, however, marginally ahead of October’s 5-year average. Shipments from
U.S. ports totaled 4.5 million tons, a decrease of 11.1% compared to a year ago. Included were
81,000mt shipped to Québec City for final delivery overseas. Loadings at Canadian ports jumped
more than 60% to 950,000 tons. Through October the iron ore trade stands at 50 million tons, an
increase of 2.5% compared to a year ago, and 14.6% better than the 5-year average for the January-October
timeframe. Shipments from U.S. ports are virtually tied with a year ago, and 14.6% ahead of the 5-year average.
Cargoes destined for Quebec City for transshipment overseas total 3.5 million tons through October. Loadings at
Canadian ports are up 23.3% compared to a year ago, and 14.3% ahead of the 5-year average. Shipments of coal on
the Lakes totaled 2.7 million tons in October, a decrease of 11.6% compared to September, and a drop of 11%
compared to a year ago. Compared to the month’s 5-year average, loadings were down 25.3%. Loadings at Lake
Superior ports rose by 5.5%, but shipments from Lake Michigan and Lake Erie terminals decreased by 33.4 and
26.1% respectively. There were no overseas shipments from Superior, Wisconsin, in October. Year-to-date the Lakes
coal trade stands at 20.2 million tons, a decrease of 8.5% compared to a year ago, but loadings are nearly 26%
behind the 5-year average. Shipments of limestone totaled 2.9 million tons in October, a down 10% compared to
September, and 21.8% below the level of a year ago. The October stone float was also 20%
off the month’s 5-year average. Shipments from U.S. ports fell 22% in October. Loadings at
Canadian quarries slipped by 24%. Year-to-date the Lakes limestone trade stands at 23.5
million tons, an increase of 36,000 tons compared to a year ago, but a decrease of
1,258,000 tons, or 6%, compared to the 5-year average for January-October timeframe.
Lake Carriers’ Association represents 17 American companies that operate 57 U.S.-flag
vessels and tug/barge units on the Great Lakes and carry raw materials such as iron ore
&fluxstone for the steel industry, limestone & cement for the construction industry, coal for
power generation, as well as salt, sand and grain.
Port of Tacoma international container volumes improved 20% year to date in October, even as peak shipping
season began winding down. Total volume improved 34% over the same month last year, with 165,173 TEUs crossing
Tacoma's terminals. Full import containers improved 26% year to date, while full exports grew nearly 17% in the same
time period. For the year, container volumes increased nearly 14% to 1,387,761 TEUs. Meanwhile, intermodal lifts and
breakbulk cargo volumes continued improvement last month. High demand for machinery and construction equipment
overseas drove breakbulk volumes up 91% on the year….. Port of Seattle year-to-date through October’s total
container through-put was 1,611,230 TEUs, down 5.4% over the 2011 period. October 2012’s total volume was
150,847 TEU, up from 138,307 in September, but down 15.9% from the 179,317 TEU handled in October 2011……
4,930,029 TEUs were handled between January and end October at the Port of Long Beach, down 3.2% from last
year. The 530,312 TEU through-put in October was up 8.7% over the same month in 2011. Year-to-date tonnages
were up 26.53% for breakbulk 868,798mt, down 4.75% for dry bulk from 91,301,661mt in 2011 and marginally up
0.74% to 25,597,584mt for bulk liquid cargoes……718,406TEU total containers were handled at the Port of Los
Angeles during October, up 0.82% and 6,906,578 total count year to-date through end October, up 4.69%.
www.marcon.com
37
Bunker Prices Worldwide
Although fuel remains a major expense and
concern for all tug operators, there has been a
slight softening in the price which I am sure will
be appreciated, even if it may just be
temporary. Average November 2012 MDO
prices in Houston were US$ 1,028.50 per
metric ton, down from $1,045.50 in October, but
generally up from average prices seen in the
last Tug Market Report with the exception of
Singapore. Average MGO prices for November
were $1,000.50 in Houston ($1,052.50),
$1,015.50 in Fujairah ($1,027.50), $924.00 in
Rotterdam ($972.50) and $934.00 in Singapore
($959.00). OPIS contract average prices
declined slightly on the U.S. West Coast in the
last month. As of the end of Thanksgiving week,
ultra-low sulfur fuel was $3.24/U.S. gallon in
Seattle (compared to around $3.30 in October), Portland at US$ 3.25 /g ($3.29), San Francisco $3.17/g ($3.24), Los
Angeles, Long Beach and El Segundo, California $3.22/g ($3.26) and San Diego at $3.29/g ($3.29). Boston on the
East Coast was $3.49/g ($3.41). Kirby Corporation of Houston, Texas noted that average diesel fuel prices for their
average of 246 towboats operated during third quarter 2012 decreased to $3.10 from $3.35 the previous quarter for
fuel consumed.
The International Energy Agency’s 13 November 2012 “Oil Market Report” shows oil
prices falling to four-month lows in late October and early November amid mounting
pessimism over the global economic outlook. Prices fell further after the U.S. presidential
election on worries over the so-called U.S. “fiscal cliff” looming at end-year, with Brent
last trading at $109.25/bbl and WTI at $86/bbl. The forecast of 4Q12 global oil demand
has been cut by 290 kb/d since last month’s report, to 90.1 mb/d, reflecting persistent
weakness in Europe and impact of Hurricane Sandy in the US.
U.S. Energy Information Administration projects that West Texas Intermediate (WTI) crude oil will average $89/bbl
in fourth quarter 2012, about $4/bbl lower than in last month’s “Short-Term Energy Outlook” while the Brent price is
expected to average about $1/bbl less than in last month’s forecast at about $110/bbl over the same period. Projected
WTI discount to Brent crude oil, which averaged $22/bbl in October 2012, falls to an average of $11/bbl in fourth
quarter 2013. WTI crude oil is forecast to average $88/bbl in 2013, while the Brent forecast remains unchanged at
$103/bbl. EIA expects U.S. total crude oil production to average 6.3 million barrels per day (bbl/d) in 2012, an increase
of 0.7 million bbl/d from 2011. Projected U.S. domestic crude oil production increases to 6.8 million bbl/d in 2013, the
highest level of production since 1993. EIA expects global oil markets to loosen in fourth quarter 2012 as forecast
liquid fuels supply, which was 0.7 million bbl/d lower than world consumption in third quarter 2012, outpaces
consumption by 0.1 million bbl/d in the fourth quarter, leading to an increase in world inventories. Projected liquid fuels
consumption declines by 0.3 million bbl/d from third quarter 2012 to fourth quarter 2012 while global production
increases by 0.5 million bbl/d, as members of OPEC continue to produce more than 30 million bbl/d of crude oil and
non‐OPEC countries recover from unplanned outages and scheduled maintenance. EIA also expects global inventory
builds to continue during first half 2013, mostly due to an increase in non‐OPEC supply. World liquid fuels
consumption grew by an estimated 1.0 million bbl/d in 2011. EIA expects world consumption growth of about 0.7
million bbl/d in 2012 and 0.9 million bbl/d in 2013, with countries outside of
the Organization for Economic Cooperation and Development (OECD)
driving global consumption growth. Energy price forecasts are highly
uncertain. WTI futures for February 2013 delivery during the five‐day
period ending November 1, 2012, averaged $87.21/bbl. Implied volatility
averaged 31%, establishing lower and upper limits of the 95% confidence
interval for expectations of monthly average WTI prices in February 2013
at $66/bbl and $115/bbl, respectively. Last year at this time, WTI for
February 2012 delivery averaged $93/bbl and implied volatility averaged
39%. The corresponding lower and upper limits of the 95% confidence
interval were $66/bbl and $130/bbl.
www.marcon.com
38
Recent News – North America
The Great Lakes Towing Company completed a contract with American
International Line to deliver six FRP tanks to Alpena, Michigan. The tanks
were shipped aboard the M/V “Copenhagen” which sailed from India. The
vessel arrived at the Cleveland-Cuyahoga County Port Authority Dock on
Tuesday, October 23. It was there that the tanks were then loaded onto a
barge. The Great Lakes Towing Company vintage 118’ x 26’ x 14’ depth
tug “Ohio” (ex-Lawrence C. Turner, No. 15 M.F.D.) towed the barge from
Cleveland, Ohio to Alpena, Michigan where the tanks were delivered to
Lafarge Corporation. The 1,950BHP “Ohio” was originally built in 1903 by
Ship Owners Drydock Co. in Chicago, Illinois as a City of Milwaukee fire
tug and purchased by Great Lakes Towing in 1952 during their conversion
of 25 vessels of their fleet from steam to diesel power. Only the hull of the original vessel remains. Initially the tug
was repowered with Cleveland 16-278A driving a 1,090kW, 525vDC generator and an electric propulsion motor,
but is now fitted with a single EMD 16-645E6 with a Falk 3.571:1 gear and 102 ” five-blade prop. The “Ohio” is still
going strong and actively classed ABS A1 Towing Service, Great Lakes, St. Lawrence River Service, AMS River
Service.
Rand Logistics, Inc. announced the christening and commencement
into service of the Jones Act compliant tug “Defiance” (ex-Beverly
Anderson, April T. Beker) and the self-unloading barge “Ashtabula” (exMary Turner, Erol Beker). The articulated tug/barge was acquired on
December 1, 2011 from US United Ocean Services LLC. Modifications
required for Great Lakes service began in May 2012 and have now been
completed. The vessel was originally scheduled for delivery in early
August but was delayed due to complexities in the conversion process.
The total invested cost of the ATB is substantially less than the new build
cost of a similarly-sized Jones Act compliant vessel. This ATB unit is
Rand Logistics’ sixteenth vessel. The “Ashtabula” loaded sand in Brevort,
Michigan for delivery to Buffalo, New York on its maiden voyage. Scott Bravener, President of Lower Lakes,
commented, “The ‘Ashtabula’ is a versatile vessel that will augment our river class capabilities with sufficient carrying
capacity to allow for increased market penetration in the mid-class vessel segment of the Great Lakes market. The
introduction of this vessel into service demonstrates our continuing commitment and confidence in the future of our
industry and our customers' growth prospects. The addition of the Ashtabula has allowed us to gain additional market
share in several end markets. These market share gains will allow us to maximize the efficiency of our existing fleet.
Despite a challenging economic environment, our fleet is fully booked for
the balance of this season and the 2013 sailing season.” The twin screw,
7,200BHP “Defiance” was built in 1982 by Marinette Marine Corp. and
powered by a pair of EMD 20-645E7s. The 42,800stdw, 610’ x 78’ x 51’
depth ocean hopper barge was built in 1982 by Bay Shipbuilding of
Sturgeon Bay, Wisconsin at a cost of about US$ 35,000,000 for Beker
Industries to haul phosphate rock and other dry bulk cargoes and fitted
with a loop-belt 4,500tph discharge system and deep notch for the tug.
The barge went through a life-extension program in the 1990s and a
Bludworth coupling system fitted in 2007.
Tidewater Barge Lines’ 274’ x 84’ x 18.5’, 1997 built, double hull, inland tank
barge “Tri-City Voyager” with about 42,143bbl of diesel on board, struck the
walls of the lock approach to The Dalles on the Columbia River in Oregon early
morning on Friday 23rd November, while being pushed by the 95’ x 31’,
2,800HP push boat “Defiance”. There was no pollution or breach to the hull.
The pushboat and barge continued north through the Dalles Dam locks. Coast
Guard investigators concluded that the barge struck the walls of the lock
approach to The Dalles and not a submerged object as initially thought.
www.marcon.com
39
The Coast Guard rescued five crewmembers from Northland Services’ twin screw,
3,000HP tug “Polar Wind” (ex-Gale Wind) which ran aground and began taking on
water on the south side of Ukolnoi Island, approx. 206 miles east-northeast of Dutch
Harbor and 40 miles east of Cold Bay, Alaska at Lat: 55.200; Long -161.613 at 2058
pm Tuesday 13th November. The 86’ x 32’, 1991 built twin screw tug and 250’ x 75’
x 16’ ocean deck barge “Unimak Trader” (ex-EM 1146, Barge 250-1) were transiting
from Sand Point to Dutch Harbor with a cargo of frozen seafood for Trident
Seafoods when they grounded, while the tug was reportedly attempting to recover
the barge after the towline parted in stormy weather. The weather at the time of the
grounding was 6 to 8’ seas and 40 mph winds. A Coast Guard MH-65 Dolphin
helicopter crew, deployed aboard the Coast Guard Cutter “Sherman”,
arrived on scene at 0214 am Wednesday, and safely hoisted three of the
five crewmembers from the vessel and transported them to Cold Bay. The
Dolphin helicopter crew left their Coast Guard rescue swimmer with the
remaining two crewmembers and an Air Station HC-130 Hercules airplane
remained overhead to monitor the situation. An Air Station Kodiak MH-60
Jayhawk helicopter crew from Air Station Kodiak arrived on scene and
hoisted the two remaining crewmembers and the rescue swimmer and
transported them safely to Cold Bay. The Coast Guard worked with the
Alaska Department of Environmental Conservation and the owner of the
tug and barge, Northland Services, to respond to the situation. Northland
Services hired Global Diving and Salvage to develop a plan to salvage the tug
and barge, and Alaska Chadux to respond to any pollution issues. “The safe
rescue of the crewmembers of the tug Polar Wind highlights the importance of
our continual presence in the Bering Sea and the northern Pacific and the quick
response capabilities of our ship and aircraft crews,” said Capt. Paul Mehler III,
Commander, Coast Guard Sector Anchorage. “However, our mission still
continues. Now that the crew of the ‘Polar Wind’ has been safely removed from
vessel, we are shifting our focus to ensure that any potential pollution from the
vessel is contained to protect the environment and marine life.”
Responding to an aerial survey report of a fuel sheen around the grounded
tug and barge, response crews on Friday 16th November deployed
containment boom around the “Polar Wind” to help minimize any
environmental impact. Initial evaluations of the tug showed propeller damage
and a missing rudder. It was unknown at that time if the fuel tanks had been
damaged, however the sheen was
reportedly coming from the tug.
“Unimak Trader” had at least five
flooded spaces in the hull and
remained hard aground. There are no
cargo areas below the main deck of
the barge. Fuel on board “Polar Wind” was updated to reportedly more than
20,500g of diesel and the barge was reportedly carrying 1,800g of diesel and a
deck cargo of heavy equipment and 97 refrigerated cargo containers, 33 of
which were in use with a cargo of over 1,475,000lbs. of frozen seafood
products. 64 containers were empty.
Northland Services activated eleven response vessels and approx. 70
personnel to conduct fuel recovery, grounded vessel assessment, barge
cargo offload, and other response operations. On Saturday 24th November,
weather conditions allowed thirteen containers to be transferred from the
aground “Unimak Trader” to Northland Service’s 276’ x 70’ x 18’ ocean deck
barge “Nushagak Trader”, bought in by Western Towboat’s 4,000HP, 117’ x
32’ twin screw tug “Ocean Ranger” and anchored offshore. Four local fishing
vessels out of King Cove also assisted salvage operation carrying divers,
environmental responders and performing sonar soundings.
www.marcon.com
40
De-fueling of the “Polar Wind” began on Saturday as well, with fuel and lube
oil being transferred to Mangone Marine’s 132’ x 30’ salvage vessel
“Redeemer” (ex-Tenille, USN YF-881) from Unalaska. Refueling of the
generators to maintain power to the refrigerated containers on the “Unimak
Trader” was also conducted. Qayaq Marine Transportation’s 150’ x 50’,
1997 built, landing craft “Sam M. Taalak”, 145’ x 46’ landing craft “Nunaniq”
and Global Diving’s 80’ x 24’ dive support
vessel “Sand Island” (ex-Beacon Fleet
200) assisted in operations. Approx.
13,000 gallons of diesel and lube oils
were removed from the “Polar Wind” and
additional lube and hydraulic oils were removed on Monday 26th November. The
below deck fuel tanks were examined and all residual fuel scheduled to be
removed. An anchor was positioned at the stern of the Polar Wind to help secure
the vessel in place during the salvage operation. All remaining shipping
containers were expected to be removed from the barge “Unimak Trader” by the
end of Monday 26th November.
Divers conducted a survey of the hull of the “Unimak Trader” on the night of November 25, 2012 and discovered
significant damage to the starboard side and bottom of the 250’ barge. All containers holding frozen seafood were
offloaded and lightered to the barge “Nushagak Trader” and their contents maintained at minus 15°F throughout the
event. The valuable cargo of frozen halibut, cod, pollock and surimi are reportedly in good condition and marketable.
The Alaska Department of Environmental Conservation reported no sign of impact to wildlife. The site is within
designated critical habitat for Stellar sea lions and sea otters. The response was been hampered by rough weather,
with winds at times reaching 40mph and seas as high as 14’. Weather on the
26th was northeasterly winds to 25kn, seas 9’ and fog and forecast to
increase to 30kn with 8’ seas and fog on Tuesday. By Friday 30th November,
the crew removed 95 containers which had been successfully transshipped
and transported them to Dutch Harbor by the “Nushagak Trader” despite
25kn northerly winds and 14’ seas and the barge being in the surf line. Two
empty containers, a generator, crane and two forklifts were left on the barge
to assist with the salvage operation scheduled to commence at Saturday
afternoon’s high tide. Winds were expected to increase to 30kn at night with
northwesterly 30kn winds and 10’ seas forecast for Saturday.
In spite of the continuing high winds and seas, at approx. 1530PM on Friday 30th November, “Polar Wind” was
successfully recovered from the grounding site. An underwater inspection was conducted and after consultation with
the U.S. Coast Guard, the vessel was towed to Sand Point for further inspection and completion of temporary repairs.
Barge “Unimak Trader” was removed from the grounding site at 1300PM on Saturday 1st December and an
underwater survey conducted by Global Diving to determine the condition of the barge and if immediate temporary
repairs would be required before transit to Sand Point. Weather during Saturday day was 35kn Northwest winds with
higher gusts, seas to 11’ and freezing spray, increasing to Northwest winds of 40kn with higher gusts at night, seas to
12’ and heavy freezing spray. Weather on Sunday 2nd December was Northwest winds 40kn with higher gusts, seas
13’ and heavy freezing spray. After temporary repairs and inspection are completed, Northland Services, in
consultation with the U.S. Coast Guard will select a shipyard for permanent repairs to both vessels.
An investigation as to the cause of the grounding is ongoing by the U.S. Coast
Guard and Northland Services. “Polar Wind” was built in 1991 by Tri-Star Marine of
Seattle, Washington with a steel hull and aluminum pilothouse for Anderson Tug
and Barge Company of Alaska. She was purchased by Northland in 2007 and
underwent a complete rebuilding / refurbishment in 2008. She is powered by a pair
of CAT 3512DITAs total 3,000BHP with Reintjes 5.75:1 gears and 90” 4-blade
stainless steel props. Towing gear consists of a single drum hydraulic winch with a
wire capacity of abt. 2,400’ of 1.75” wire and hydraulic tow pins. “Unimak Trader”
was built in 1976 by Todd Shipyards in Seattle, Washington originally for Crowley
Maritime. (On-site photos courtesy of U.S. Coast Guard).
www.marcon.com
41
The 150’ x 39’ x 20.2’ twin screw tug “Samuel de Champlain” made an unexpected call in Port Washington, Wisconsin
on 20th November to await a break in weather while being towed to Bay Shipbuilding in Sturgeon Bay by Great Lake’s
Towing’s “Missouri” to assess damages after an engineroom fire. “Samuel de Champlain” is normally assigned to the
460’ x 70’ x 77’, 18,000dwt self-discharge cement barge “Innovation” which was built in 2006 by Manitowoc Marine of
Sturgeon Bay, Wisconsin and working on behalf of Lafarge and managed by Andrie, Inc. of Muskegon. The tug and
barge were disconnected in Milwaukee for the tow. “Samuel de Champlain” (ex-Norfolk, Vortice, Margarita, Tender
Panther, Musketeer Fury) was originally built in 1976 as the “Musketeer Fury”, along with two sister-tugs, for B.
Hanssen to work in the North Sea and later operated for companies as Ugland,
Wilhelmsen and Rimorchiatori Riuniti. The tug probably should have at one point in
her life been renamed “Phoenix”. In 1993, while enroute from the Mediterranean to
Veracruz, Mexico for a PEMEX contract, the “Vortice” suffered a devastating fire,
was abandoned and left adrift at 28 deg. 01.3’N; 34 deg, 51.8’W. The crew was
rescued and the tug towed first into Las Palmas and then on to Trieste where she
was sold to Finanziaria Commerciale Marittima S.r.l. and laid-up awaiting repairs. In
August 1996, Marcon sold the burnt-out tug hull to McKeil Marine of Hamilton,
Ontario and had her towed across the Atlantic by the Panama flagged tug supply
boat “Joan Salton” which Marcon had also just sold out of Trapani, Italy to Caribbean operators. Bay-Gulf Trading of
Norfolk, Virginia purchased the tug hull from McKeil in 1999 and renamed her “Norfolk”. The tug, which was reflagged
under U.S. registry, received full Jones Act Trading privileges through an Act of Congress and was completely rebuilt
local Colonna’s Shipyard, Inc. with a new superstructure fitted and the tow winch and all machinery totally rebuilt. At
the end of 2005, “Norfolk” was sold to Lafarge North America Inc. who made further upgrades to the tug to operate
with their newbuilding cement barge “Innovation”. “Samuel de Champlain” is powered by a pair of EMD 20-645E5s
developing a total of 7,200BHP at 900RPM and fitted with 10’10” diameter Liaaen controllable pitch props in kort
nozzles. Great Lakes Towing’s 88.4’ x 24.6’ x 12.3’, 800HP single screw tug “Missouri” was built in 1927 by American
Ship. As a side note, after the initial 1993 fire Marcon sold the replacement tug to the “Vortice” into Mexico for the
contract.
The Mississippi River System stretches from Minneapolis,
Minnesota to New Orleans, Louisiana. The Illinois, Missouri, and
Ohio River systems all empty into the Mississippi. Further south, the
Arkansas and Ouachita Rivers also flow into the Mississippi. The
Mississippi main stem runs for 1,800 miles and the entire system is
9,000 miles. Therefore anything affecting traffic on this waterway can
have a major effect that could ripple right through the entire U.S.
economy. The water level continues to fall to historic lows on the
Mississippi and Missouri Rivers which is already slowing and could
further limit and even temporarily halt barge traffic on sections of the
waterway. Unlike 2011 when widespread flooding swamped the
Missouri Basin, drought conditions have gripped the entire area this
year. Normally the U.S. Army Corps of Engineers reduces the flow of
water for the winter seasons from the Gavins Point hydroelectric dam, the lowermost and last dam on the Missouri
River before the Mississippi, as outlined in their Master Manual. This is for water conservation measures, prevent
potential flooding and ensure that there is enough water for the spring shipping season. Under normal conditions,
water from the Missouri River accounts for about 60% of the flow in the Mississippi River. Because of this year's
significant drought though, the Mississippi River has received as much as 78% of its water from the Missouri River.
This year’s drought that the upper Missouri River basin is experiencing is causing record low inflows of water.
Basically there is less water coming into the upper basin and more going out of the system as the drought conditions
downstream already have required higher than normal releases to meet navigation flow targets. For the eighth
consecutive month, runoff into the main stem reservoir system was below normal. Due to the low water in the upper
basin, drought conservation measures started this winter with Gavins Point Dam with releases at minimum levels and
these releases likely to continue at a low level or may even be halted this winter. The 2013 navigation season will also
begin with reduced navigation flow support. The reduction in the amount of water released into the Mississippi River
could cause the depth of the navigable channel in the Mississippi River to drop below 9’ if the drought continues and
the area does not see any significant rain in the very near future. Most vessels in the area are now limited to a 9’ draft
and a number of operators are shifting their shallower pushboats onto the Cairo, Illinois to St. Louis, Missouri run to
handle traffic. Cargo Carriers is reportedly limiting drafts on northbound barges on the Mississippi River to 8’ due to
the low water and likely to soon do the same on southbound traffic. If shippers go to a 6’ draft limitation, the river could
be effectively considered as closed.
www.marcon.com
42
For months, low water on the Mississippi River slowed and sometimes stopped barge traffic and navigating the river is not getting any better. As of 3rd December, the National Weather
Service reported that the river was 2.18’ below gauge at St. Louis, and about 4’ below normal for
this time of year. Forecasts indicate that it could hit 4’ below gauge by mid-December. The
record low level for the Mississippi River at St. Louis is 6.2’ below normal set in 1940. As the
National Weather Service has already warned, water levels may drop even lower, particularly in
the 180-mile stretch between West Alton, Missouri, at the mouth of the Missouri River and Cairo,
Illinois., at the mouth of the Ohio River. This is an area well known for its rocky river bottom. To
maintain navigable depths, the Army Corps of Engineers relies on flows from the Missouri River plus releases from its
six huge main stem reservoirs, often referred to as the “Great Lakes of the Missouri.” Unlike 2011 when widespread
flooding swamped the Missouri Basin, drought conditions have gripped the entire area this year. The Missouri River’s
runoff was at its lowest level in September in more than a century of record keeping. Ordinarily, the Missouri
contributes 60%, or more, of the flow in the Mississippi River. Through next
February, the Corps plans lower-than-normal releases from its reservoirs. In
fact, the agency has already announced that it will decrease water releases
from Gavin’s Point Dam, the most downstream reservoir on the Missouri
River, to minimum water levels, affecting navigation south of St. Louis around
December 1. In response, the barge industry launched a campaign to keep
navigation moving. Barge traffic is becoming more congested as the
remaining navigable channels become narrower. At one time in recent
weeks, at least 97 barges were stranded or grounded due to low water. As
many as 10 dredges have been working ‘round-the-clock to keep navigation
channels open.
Shippers requested the Corps of Engineers to expedite removal of two rocky
patches which could obstruct navigation and stop barge traffic below St. Louis if
the river level continues to drop in December and January. As releases from
Missouri River reservoirs are reduced, water levels in the Mississippi could drop
by another 2 to 4’. Michael D. Petersen, chief of public affairs at the Corps’ St.
Louis District, said dredges had been working nonstop since last July 1st, a
month earlier than normal, to keep navigation channels open. As rock
outcroppings near Grand Tower and Thebes, Illinois, are considered potential
“trouble spots,” the Corps has begun contract negotiations so rock can be
blasted away. Other rocky sections in the same general area have been cleared
in recent years. The question though is timing. Although there are hopes they
can start blasting in December, the general feeling is that it may end up being too little, too late.
The American Waterways Organization (AWO), along with the National Waterways Conference and Waterways
Council, Inc. and 15 other national organizations submitted a letter to President Obama and the Federal Emergency
Management Agency requesting a presidential declaration of emergency and seeking “immediate assistance in
averting an economic catastrophe in the heartland of the United States.” The letter calls attention to the worsening
situation on the Mississippi River, which has already seen near historic low water since this summer and heightened
further as the U.S. Army Corps of Engineers began reduction of water to the river. The groups are calling upon the
President to issue an emergency declaration to immediately begin the work to remove the rock pinnacles that will soon
become an impediment to navigation and to maintain sufficient water flows while the rock removal work is taking
place. The groups warned of $7 billion in key products such as corn, grain, coal,
petroleum, chemicals that are at risk in December and January, including: over 7 million
tons agricultural products worth $2.3 billion; over 1.7 million tons chemical products worth
$1.8 billion; 1.3 million tons petroleum products worth over $1.3 billion; over 700,000 tons
crude oil worth $534 million; and 3.8 million tons of coal worth $192 million. AWO and WCI also issued a statement
calling attention to the jobs and wages in jeopardy in the wake of further navigation restrictions or possible closure to
barge traffic on the Mississippi River in December and January. States along the river would see an immediate impact
on jobs and wages, and the potential toll would be harshest in Louisiana, Illinois and Missouri, with thousands of
impacted jobs and tens of millions of dollars in wages at risk at a time when the economy is still recovering from
recession and record high employment. Also, lawmakers continue to press the Administration to take action. 15 U.S.
Senators and 62 members of the U.S. House of Representatives signed joint letters to the Administration calling
attention to the severity of the situation and urging action to keep the river open to navigation. Politics and local
economies also come into play. As in all over the world there is increasing competition for water resources and some
upstream states like South Dakota are trying to hold onto water for use in the oil-fracking boom.
www.marcon.com
43
Earlier this month, Missouri Governor Jay Nixon sent a letter to the Assistant Secretary of the Army, urging the U.S.
Army Corps of Engineers to continue providing water flow from the Missouri River. The Corps' plans stops release of
water from the Missouri’s upstream reservoirs beginning December 1st, which would negatively impact ability to
navigate the Mississippi River. “The 2012 drought has caused a significant impact on water levels on the Missouri and
Mississippi Rivers. With the continuing and projected lack of adequate precipitation, additional barge traffic restrictions
on - or even closure of - the Mississippi River channel become imminent possibilities. I urge the U.S. Army Corps of
Engineers to avert potential economic disaster on this vital avenue American farmers
use to get their goods into the world market. During this summer and fall, Missouri River
flow support contributed as much as 78% of Mississippi River flows at St. Louis. Even
with that significant support, the section of the Mississippi from St. Louis to Cairo, Illinois
(the ‘bottleneck reach’) is fast approaching levels last seen during the historic 1989 low
water year. Already, companies in the navigation industry along these rivers are being
forced to ship less material by ‘light loading’ fleets, and the potential for further
restrictions is likely. In addition, harbors are challenged with loading and unloading in
difficult shallow water conditions. I know that alternative measures are being considered to maintain the Mississippi
channel, including dredging and clearing of rock pinnacles along the river. I urge you to fast-track and fully implement
those efforts. This emergency requires a multifaceted approach, and I encourage you to use all possible means to
ensure that this vital asset is preserved. The Corps of Engineers plans to restrict Missouri River navigation flow
support to the Mississippi River on December 1, based on the Missouri River Master Manual. Given the already taxed
status of the Mississippi - when it has flow support from the Missouri - it is clear that the withdrawal of that support
December 1 would have a significant adverse effect on our Nation's economy……” Gov. Nixon wrote.
Low water levels on the Mississippi are going to end up costing barge operators more money. This added cost for
transporting cargoes will naturally end up being transferred to the consumer due to
reduced cargo capacities and in some cargoes being transferred to rail or highway. The
amount of cargo lost on a typical 200’ x 35’ x 12’ jumbo box barge forced to “light load”
and operate at an 8’ draft (abt. 1,464stdw) vs. a 9’ draft (abt, 1,683stdw) in fresh water
during drought conditions is approx. 219 short tons deadweight – which is equivalent to
about 2 railcars or 8.75 semi-tractor / trailer trucks carried at higher cost, with higher
greenhouse gases, more petroleum consumed, potentially even times more fatalities and a possible loss of thousands of dollars to the barge operators. A lot of people in the
Mid-West are going to be praying for rain as it is very unlikely that the Corps. will release more water.
Low water is also plaguing ore and coal carriers on the Great Lakes. In mid-August, the
1,013’.5’ x 105.0’ self-unloading bulk carrier “Paul R. Tregurtha”, owned by Interlake
Shipping Co., ran aground in St. Mary’s River between Lakes Superior and Huron while
hauling 62,000 tons of coal. Shippers said lack of needed dredging added to drought
problems. Lake Carriers’ Association, which represents owners of 57 U.S. flag selfpropelled vessels and tug/barge units ranging from 494’ – 1,013.5’ in length, said water
levels and lack of authorized channel depths had adversely affected the dry-bulk cargo
trade. Only seventeen of the Great Lakes’ 63 federally maintained ports were dredged this year. The Corps of
Engineers predicted that Lakes Michigan and Huron will hover within an inch, either above or below, the system’s alltime low set in 1964. The three lower lakes – Erie, St. Clair and Ontario – are forecast to remain well below historical
averages for the next several months. Years of inadequate funding for dredging left an estimated 17-plus million cubic
yards of sediment clogging the Great Lakes Navigation System. That total is expected to grow to 21 million cu. yds. by
2015. The impacts of the dredging crisis are felt every day. LCA's members estimate that three of every four cargos
they carry each year represent less than full loads. The amount of cargo that's left behind varies with the size of the
vessel. When low water levels have amplified the lack of dredging, the largest vessels have forfeited as much as
12,000 tons, or 17% of their per-trip carrying capacity. If the ship is carrying iron ore for the steel industry, 12,000 tons
is enough product to make the steel in 10,000 cars, production of which would keep a large auto plant in operation for
more than three weeks. The dredging crisis is reportedly man-made. The Corps needs $200 million to restore the
system. The Harbor Maintenance Trust Fund (HMTF), the repository for a Federal tax levied on waterborne commerce
specifically to pay for dredging, has a surplus that is projected to reach $7 billion by the end of FY12 because the
HMTF collects about $1.6 billion per year, but annually spends less than $800 million. Two bills requiring the HMTF to
spend as much as it takes in have been introduced in the 112th Congress: H.R. 104 and S. 412. If provided adequate
funding the Corps can restore the Great Lakes Navigation System to project dimensions and allow waterborne
commerce to achieve the efficiencies the American economy needs to fully rebound from the recession.
www.marcon.com
44
Seacor Holdings Inc.’s net income for quarter ended September 30, 2012
was $16.1 million. During the first quarter, Seacor disposed of certain
companies and assets that were part of its Environmental Services business
segment for a net sales price of $99.9 million. For the preceding quarter ended June 30, 2012, net income attributable
to Seacor Holdings was $11.2 million. For the quarter ended September 30, 2011, net income attributable was $3.8
million, including a net loss from discontinued operations of $0.8 million.
Offshore Marine Services – Operating income was $21.2 million on operating revenues of $134.3 million compared
with operating income of $0.8 million on operating revenues of $123.3 million the preceding quarter. In the U.S. Gulf of
Mexico, operating income was $13.3 million higher in the third quarter, of which $9.1 million was due to an increased
contribution from Seacor's liftboat fleet and $4.6 million due to gains on asset dispositions, of which $4.1 million had
been deferred in prior periods. The liftboat fleet contributed an additional $6.8 million of time charter revenues primarily
due to reduced drydocking activity and positive impact of seasonal market conditions. Time charter revenues for other
vessel classes declined by $0.8 million in total during the current quarter. In overall terms including liftboats, fleet
utilization was 77.3% compared with 71.1% the preceding quarter and average day rates increased from $12,610/d to
$13,394/d. During the quarter, Seacor cold-stacked three AHTSs. As of June 30, 2012,
Seacor had no vessels in cold-stack. Operating expenses were $3.0 million lower
primarily due to reduced drydocking activity. In international regions, operating income
was $7.1 million higher, including higher gains on asset dispositions of $1.4 million. Time
charter revenues were $5.0 million higher primarily due to a seasonal time charter in
Asia and reduced drydocking activity during the third quarter. Excluding Seacor's fleet of wind farm utility vessels,
utilization was 86.3% compared with 83.3% in the preceding quarter and average day rates increased from $11,631/d
to $12,162/d. Operating expenses were $2.2 million lower primarily due to decreased drydocking and cost of
mobilizations between geographic regions during the preceding quarter. In the third quarter, total number of days
available for charter for Seacor's fleet, excluding wind farm utility vessels, decreased by 197 days, or 2% primarily due
to net fleet dispositions. Overall utilization increased from 77.4% to 82.0% and overall average day rates increased by
5% from $12,068 to $12,718/d. Drydocking costs were $4.3 million compared with $10.8 million.
Marine Transportation Services – Operating income was $2.0 million on operating
revenues of $27.4 million compared with operating income of $0.5 million on operating
revenues of $25.8 million the preceding quarter. Operating results for Marine
Transportation Services' U.S.-flag product tanker fleet were $2.3 million higher the third
quarter primarily due to less out-of-service time and lower repair and maintenance
expenses. Operating results for foreign flag Roll-on/Roll-off vessels were $0.8 million lower primarily due to settlement
of a legal dispute. As of September 30, 2012, Marine Transportation Services’ fleet included seven U.S.-flag product
tankers operating in domestic coastwise trade, of which five were owned and two were leased-in, and seven owned
foreign flag RORO vessels operating between the United States, Bahamas and Caribbean. Of the U.S-flag product
tankers, four were operating under long-term bareboat charters and three under time charters. The fleet also includes
five U.S.-flag deck barges, two U.S.-flag RORO barges and one U.S.-flag articulated tug-barge unit operating under a
joint venture. At September 30, 2011 quarter-end, Marine Transportation Services’
fleet included five U.S.-flag product tankers and eight foreign flag RORO vessels.
Other, primarily Harbor and Offshore Towing Services, reported a segment profit of
$6.6 million on operating revenues of $18.0 million compared with segment profit of
$2.6 million on operating revenues of $17.6 million in the preceding quarter. Third
quarter results included a termination payment of $7.0 million received from one of
Harbor and Offshore Towing Services customers following the cancellation of a longterm charter, partially offset by a $1.2 million impairment charge for an aircraft
included in Seacor's lending and leasing activities.
Seacor's unfunded capital commitments as of September 30, 2012 included: 12 offshore support vessels for $131.4
million; seven inland river tank barges for $15.1 million; three inland river towboats for $9.4 million; and four harbor
tugs for $23.0 million. In addition, Seacor notified the lessee of its intent to purchase two harbor tugs currently
operating under capital leases for $2.6 million. During the nine months ended September 30, 2012, capital
expenditures were $257.0 million. Equipment deliveries included two offshore support vessels, one wind farm utility
vessel, three inland river dry cargo barges, four liquid tank barges, and two inland river towboats. During the same
period, Seacor sold four offshore support vessels, nine inland river dry cargo barges, two inland river towboats, one
RORO vessel, two harbor tugs and other equipment. Two offshore support vessels sold were to Seacor's Mexican
joint venture for $48.5 million.
www.marcon.com
45
Hornbeck Offshore Services’ third quarter 2012 revenues increased 20.9% to $127.9 million
compared to $105.8 million for third quarter 2011 and decreased 2.8% compared to $131.6
million for second quarter 2012. Operating income was $26.3 million, or 20.6% of revenues, for
third quarter 2012 compared to $14.6 million, or 13.8% of revenues, for the prior-year quarter;
and $33.8 million, or 25.7% of revenues, for second quarter 2012. Hornbeck recorded net
income for third quarter 2012 of $7.4 million, compared to a net loss of ($0.7 million) for the yearago quarter; and net income of $12.0 million, for second quarter 2012. Included in third quarter
2012 results was a $0.3 million ($0.2 million after-tax) gain on
sales of the 110’, 3,000HP tug “Spartan Service” (ex-Spartan,
ex-Domar Captain) built in 1978 (photo left), sold by Marcon
International to Mexican buyers, and certain shoreside assets for net cash proceeds
of $3.0 million compared to $1.0 million ($0.6 million after tax) gain on sale of two
remotely operated vehicles for net cash proceeds of $9.3 million during the prioryear quarter. Third quarter 2012 EBITDA increased 37.4% to $48.1 million
compared to $35.0 million for third quarter 2011 and decreased 13.3% compared to
$55.5 million for second quarter 2012. An $11.1 million sequential decrease in
Upstream EBITDA was partially offset by a $3.7 million increase in Downstream
EBITDA as three modified barges were successfully deployed into crude service to meet increased demand in the Gulf
of Mexico from the Eagle Ford Shale trend.
Revenues from the Downstream segment of $12.9 million for the third quarter of 2012 decreased by $1.0 million, or
7.2%, compared to $13.9 million for the same period in 2011, and were higher than the sequential quarter by $3.0
million, or 30.3%. Hornbeck's double-hulled tank barge average dayrates were $16,626 for third quarter 2012
compared to $18,222 for the same period in 2011 and $16,284 for the sequential quarter. The decrease in dayrates
from the prior-year quarter was largely due to a higher concentration of vessels operating under time charter contracts
instead of contracts of affreightment (COAs). Utilization for the double-hulled tank barge fleet was 93.4% for the third
quarter of 2012 compared to 92.0% for the year-ago quarter and 74.6% for the sequential quarter. The sequential
increase in utilization is primarily due to fewer days out-of-service for discretionary commercial capital expenditures
readying three barges with vapor-recovery systems for charters that commenced in the third quarter of 2012 and, to a
lesser extent, fewer days out-of-service for the regulatory drydocking of a fourth barge during the third quarter of 2012.
Effective, or utilization-adjusted, dayrates for Hornbeck's double-hulled tank barges were $15,529 for the third quarter
of 2012, which is $1,235, or 7.4%, lower than effective dayrates for the prior-year quarter; and $3,381 or 27.8%, higher
than effective dayrates for the second quarter of 2012.
Hornbeck Tug & Tank Barge Quarterly Utilization and Day Rates
2012
2011
2010
2009
30-Sep
30-Jun
31-Mar
31-Dec
30-Sep
30-Jun
31-Mar
31-Dec
30-Sep
30-Jun
31-Mar
31-Dec
9
9
9
9
9
9
9
9
9
9
9
9
No. Tank Barges
884.6
884.6
884.6
884.6
884.6
884.6
884.6
884.6
884.6
884.6
884.6
884.6
Fleet Cap. (k bbl)
98,291
98,291
98,291
98,291
98,291
98,291
98,291
98,291
98,291
98,291
98,291
98,291
Barge Size (bbl)
93.40%
74.60%
85.40%
87.30%
92.00%
90.60%
82.30%
85.60%
86.90%
74.20%
75.10%
71.50%
Utilization
$16,626
$16,284
$17,271
$18,176
$18,222
$17,333
$16,377
$16,782
$18,615
$18,708
$15,816
$16,210
Avg. Dayrate
Note: As of 9/30/09, above only includes the double-hulled tank barges. All single-hulled tank barges have been stacked and excluded from above computations.
As of September 30, 2012, excluding six inactive non-core vessels, Hornbeck's
operating fleet consisted of 51 new generation OSVs, four MPSVs, nine
double-hull tank barges and nine ocean-going tugs. Hornbeck's active
Downstream fleet for fiscal 2012 is expected to consist of nine double-hulled
tank barges and nine-ocean going tugs. Hornbeck's forward contract coverage
for its nine-vessel fleet of double-hull tank barges for fourth quarter 2012 and
for fiscal 2013 is currently 73% and 20%, respectively. Hornbeck does not
currently have any contracts extending into fiscal 2014 for its Downstream fleet.
These contract backlog percentages are based on available vessel-days for
guidance periods, not estimated revenue. Effective dayrates for Hornbeck's
nine double-hull tank barges are projected to be in the range of $14,000 to
$15,000 for full-year 2012.
Hornbeck expects maintenance capital expenditures and other capital to be approximately $57.0 million and $18.1
million, respectively, for full-year 2012. For fiscal years 2013 and 2014, Hornbeck expects that annually recurring
maintenance capital expenditure budget for its company-wide fleet of vessels will range between $45.0 million and
$55.0 million per year.
www.marcon.com
46
Kirby Corporation of Houston, Texas announced net earnings for the third quarter ended
September 30, 2012 of $53.1 million compared with $52.7 million for third quarter 2011.
Consolidated revenues for the 2012 third quarter were $521.3 million compared with $563.6
million reported third quarter 2011. Joe Pyne, Kirby’s Chairman and CEO, commented, “We
were pleased with our overall third quarter performance, particularly in light of challenging
weather conditions related to persistent low water throughout the Mississippi River System
and the impact of Hurricane Isaac. These weather events negatively impacted our third quarter revenues and our
earnings by an estimated $0.03 to $0.04 per share. During the third quarter, overall demand remained strong within
the inland tank barge fleet with continued high utilization levels and price increases on both term and spot contract
business. For the coastal tank barge fleet, revenues were relatively consistent with the prior year quarter and 2012
second quarter. Utilization levels have begun to increase and there are some signs of overall market improvement….”
Marine transportation revenues for the 2012 third quarter were $349.8 million, compared with $351.2 million for the
2011 third quarter, and operating income for the 2012 third quarter was $81.7 million compared with $78.1 million for
the third quarter of 2011. Inland tank barge fleet utilization during the third quarter remained in the 90% to 95% range
with favorable pricing trends, reflecting healthy demand across all major product markets. These favorable trends were
partially offset by the negative impact of Hurricane Isaac and low water conditions throughout the Mississippi River
System which led to the light loading of tank barges, restricted tow sizes and increased transit times, all of which led to
lower revenues and ton miles. Water levels along the Gulf Intracoastal Waterway have remained at normal levels.
Kirby’s coastal fleet contributed positively to the segment’s operating income and generated approx. 20% of segment
revenues. Operating results for the coastal operations reflected some modest demand improvement in the Atlantic,
Gulf Coast, and West Coast markets, but were negatively impacted by continued low equipment utilization and
competitive bidding for available movements in New York Harbor. However, an increase in the transportation of crude
oil, the relocation of equipment from the East Coast to the Gulf Coast, as well as some modest improvement in the
demand for refined petroleum products along the East Coast have served to absorb some excess industry capacity.
Kirby Marine Transportation Performance Measurements
Ton Miles (in millions)
Revenue/Ton Mile (cents/tm)
Towboats operated (average)
Delay Days
Avg. cost/gal. fuel consumed
Tank barges active
Coastwise & local tank barges
Coastwise dry cargo barges
Inland Bbl Cap.(mill) active
Coastwise & local tank barges Bbl Cap.
Q3
2012
Q2
Q1
Q4
Q3
2011
Q2
Q1
Q4
Q3
2010
Q2
Q1
2009
Q4
2,791
9.8
246
1,244
$3.10
853
53
4
16.9
3.7
3,194
8.3
239
1,164
$3.35
818
57
4
16.4
3.9
3,282
8.1
242
2,471
$3.16
806
58
4
16
3.8
3,392
7.7
239
1,721
$3.14
819
59
4
16.2
3.8
3,552
7.6
244
1,111
$3.27
837
57
4
16.3
3.8
3,241
7.9
247
1,964
$3.25
837
3,229
7.2
230
1,981
$2.65
829
3,317
6.7
220
1,498
$2.29
825
3,246
6.9
217
1,006
$2.17
850
3,336
6.7
221
1,446
$2.29
860
3,058
7
224
1,822
$2.14
861
2,945
7.1
212
1,808
$1.98
863
16.4
16.1
15.9
16.4
16.5
16.6
16.7
Ton Miles indicate fleet productivity by measuring the distance in miles a loaded tank barge is moved. Example: A typical 30,000 barrel tank
barge loaded with 3,300 tons of liquid cargo is moved 100 miles, thus generating 330,000 ton miles. Marine transportation revenues divided by
(3)
ton miles. Delay days measures lost time incurred by a tow (tow boat & tank barges) during transit including transit delays caused by weather,
lock congestion & other navigational factors.
Marine transportation operating margin for the 2012 third quarter was 23.4% compared with 22.2% for third quarter
2011. Improvement in the 2012 third quarter operating margin reflected steady equipment utilization and higher
pricing. Commenting on the 2012 fourth quarter and full year market outlook, Mr. Pyne said, “Our earnings guidance
for the 2012 fourth quarter is $0.83 to $0.93 per share compared with $1.00 per share reported for the 2011 fourth
quarter. Our fourth quarter guidance range reflects our expectation for continued strong inland marine transportation of
petrochemical and black oil products, as well as favorable term and spot contract pricing. Our guidance also reflects
continued low water restrictions in the Mississippi River System throughout
the fourth quarter. We anticipate a normal seasonal decline in our coastal
marine transportation market, partially offset by some very modest
improvement in utilization….” Mr. Pyne continued, “Our 2012 capital
spending guidance range is currently $305 to $315 million, including
approximately $130 million for the construction of 55 inland tank barges and
five inland towboats, and approx. $70 million in progress payments on the
construction of two offshore dry-bulk barge and tugboat units (photo left)
scheduled for delivery in 2012 with an estimated cost of $52 million
each….”
www.marcon.com
47
As November came to a close, Kirby entered into an agreement to acquire
Penn Maritime Inc. and Maritime Investments LLC, an operator of tank
barges and tugboats participating in the coastal transportation of primarily
black oil products in the United States. Transaction will be financed through
a combination of borrowing under Kirby’s revolving credit facility, issuance
of new unsecured fixed rate senior notes, and issuance of Kirby common
stock. Closing is expected to occur in mid-to-late December 2012, subject
to certain conditions. Under terms of the agreement, total value of the transaction is approx. $295 million (before postclosing adjustments & transaction fees), consisting of $180 million for all voting and nonvoting equity interests in Penn
Maritime Inc. and Maritime Investments LLC and approx. $115 million for retirement of Penn’s debt. The $180 million
consideration paid to Penn equity holders will include a combination of cash of approx. $152 million and 500,000
shares of Kirby common stock. The new unsecured fixed rate senior notes are scheduled to close in mid-December
and provide for $500 million in fixed rate debt with $150 million at a 7-year maturity and $350 million at a 10-year
maturity. Pricing, inclusive of amortization of up-front fees, is 2.79% for the 7-year and
3.34% for the 10-year maturities. Kirby anticipates drawing up to $300 million for the
closing of Penn prior to year end, with the balance drawn in February 2013 to replace
$200 million of senior notes due February 27, 2013. Penn operates a fleet of 18 heated,
double-hull tank barges, with a capacity of 1.9 million barrels, and 16 tugs along the East
Coast and Gulf Coast of the U.S. Penn’s tank barge fleet has an average age of approx.
13 years with a product mix that consists primarily of refinery feedstocks, asphalt and
crude oil. Penn’s customers include major oil companies and refiners, nearly all of whom
are current Kirby customers for inland tank barge services. In March 2000, Morania Oil
Tanker, established in 1947, merged into Penn Maritime, after being affiliated since
1985.
Penn Maritime, Inc. Fleet
Barge
Penn 110
Penn 120
Penn 121
Penn 410
Penn 80
Penn 81
Penn 90
Penn 91
Penn 92
Acadia
Atlantic
Caribbean
Chesapeake
Delaware
Everglades
Key West
Potomac
Yucatan
Built/Rebuilt
GRT
LOA
Beam
Depth
Coastal
Loadline
DWT
2009
2002
2003
1979/2007*
2010
2011
2002
2008
2008
1997
1995
1995
2006
2006
1981/2006*
2004
1975/2006*
1998
7,995
7,320
7,320
7,527
6,373
6,373
7,592
7,106
7,106
9,451
8,327
8,327
3,195
3,195
15,126
8,722
5,738
10,390
414’
425’
425’
420’
378’
378’
417’
414’
414’
490’
460’
460’
300’
300’
502’
480’
388’
490’
74’
73’
73’
72’
74’
74’
76’
74’
74’
76’
72’
72’
60’
60’
84’
78’
74’
76’
31.0’
41.0’
41.0’
29.0’
31.0’
31.0’
31.0’
31.0’
31.0’
36.0’
36.0’
36.0’
24.0’
24.0’
42.0’
36.50’
29.50’
36.00’
25.75’
30.00’
30.00’
22.00’
24.58’
24.58’
25.0’
24.75’
24.75’
30.58’
29.50’
29.50’
18.75’
18.75’
35.58’
29.50’
24.50’
31.25’
16,200
18,000
18,000
12,471
13,686
13,686
15,000
15,225
15,225
20,041
17,068
17,034
6,114
6,114
26,800
21,500
13,150
20,664
Loadline
Capacity
(Gross BBL)
~105,000
115,000
115,000
~77,000
~78,000
~78,000
88,000
88,000
88,000
136,000
115,000
115,000
34,000
34,000
175,000
~140,000
~78,000
138,500
Tug
HP
Connect
Yellowfin
Penn 6
Dolphin
Amberjack
Bluefin
Mako
Penn 4
Skipjack
Coho
Teresa
Eliza
Lucia
4,000
5,700
4,300
3,900
4,000
4,000
4,300
4,000
4,000
7,010
7,010
7,010
Valiant
Capt. Hagen
Tarpon
Julie
8,000
6,000
4,300
7,010
AT/B
Wire Tow
Wire Tow
Wire Tow
AT/B
AT/B
Wire Tow
AT/B
AT/B
AT/B
AT/B
AT/B
Wire Tow
Wire Tow
AT/B
AT/B
AT/B
AT/B
(*) Double-hulled
Joe Pyne commented, “We are pleased to announce our agreement with Penn Maritime.
Penn is a well-respected U.S. Jones Act coastal tank barge operator with a wellmaintained fleet, and earns the majority of its revenue from term contracts with blue chip
domestic and international oil and refining customers. Penn’s fleet will extend our coastal
product capabilities, particularly transporting asphalt, which we expect to benefit from the
need to repair and upgrade aging highway infrastructure throughout the United States.
Penn also has vessels operating in the Gulf Coast crude oil trade which is benefitting from
the production and transport of shale-based crude, particularly out of the Eagle Ford shale
formation.” Mr. Pyne further commented, “We expect this transaction to close in mid-to-late
December of this year. In connection with the acquisition, we expect to incur some
onetime transaction fees that will impact our earnings per share in the fourth quarter of
2012. For 2013, we expect Penn to be accretive to our earnings per share, inclusive of
added interest costs and dilution from stock issuance, in the range of $0.12 to $0.18. The
accretion range is dependent upon integration, synergies, purchase price allocation and
market conditions.”
www.marcon.com
48
Tidewater Inc. of New Orleans, reported second quarter net earnings for the period ended
September 30, 2012, of $41.4 million on revenues of $311.9 million, which includes approx. $7.4
million of vessel revenue associated with retroactive rate increases agreed to during the current
quarter, but related to the period from January 1, 2012 through June 30, 2012. For the same
quarter last year, net loss was $4.9 million on revenues of $250.9 million. The immediately
preceding quarter ended June 30, 2012, had net earnings of $32.9 million on revenues of $294.4
million. Included in the prior fiscal year second quarter’s net loss is a non-cash goodwill
impairment charge of $30.9 million ($22.1 million after tax), resulting from Tidewater’s decision to change its reportable
segments during the September 2011 quarter.
Crude oil prices trended upward during the quarter ended September 30, 2012 because of renewed optimism that
governmental economic stimulus plans that were initiated during the quarter in the U.S., the Euro-Zone and in China
will provide the stimulation needed to lead to stronger economic growth globally (which, in turn, should increase
demand for crude oil) and because of geopolitical tensions in the Middle East that have renewed concerns over
potential oil shortages due to supply disruption if the tensions escalate. However, by the end of the September 2012
quarter, crude oil price volatility emerged as renewed concerns regarding prolonged levels of relatively high
unemployment in the U.S. and other advanced economies, along with a
worsening financial uncertainty in certain Euro-zone countries (despite
reduced debt burdens in ailing European countries resulting from the
sovereign debt purchases by the European Central Bank), and inflation
risks in emerging economies creating market concerns that global
demand for crude oil in the near term will soften. In addition, the OPEC,
expressed at its meeting held in June 2012 that it will strive to meet
consumer demand, stabilize the crude oil market, and ensure a
balanced global supply of crude oil by responding quickly to market
developments as the long-term demand for crude oil is expected to
grow. Tidewater anticipates that its longer-term utilization and day rate
trends for its vessels will continue to be correlated with demand for, and
the price of, crude oil, which in mid-October 2012, was trading around
$91 per barrel for West Texas Intermediate (WTI) crude and around $114 per barrel for Intercontinental Exchange
(ICE) Brent, up from $87 per barrel for WTI and $103 for ICE in mid-July 2012. High crude oil prices generally bode
well for increases in drilling and exploration activity, which would support increases in demand for Tidewater's vessels.
Conversely, downward pricing trends result in lower E&P expenditures by Tidewater’s customers, and accordingly,
lower demand for Tidewater's vessels.
Natural gas prices continue to be relatively weak due to the rise in production of unconventional gas resources in
North America (in part due to increases in onshore shale production resulting from technological advancements in
horizontal drilling and hydraulic fracturing) and the commissioning of a number of new, large LNG exporting facilities
around the world, which have contributed to an oversupplied natural gas market. The price of natural gas continued to
trend higher during the quarter ended September 30, 2012 as the supply and demand balance for natural gas
tightened due to increased demand for natural gas as a result of the
industrial sector switching from coal to gas. In addition, some production
shut-ins of natural gas dry wells occurred, but to date such shut-ins have
not yet had a significant impact on natural gas pricing, in part because a
considerable amount of natural gas is being derived as a byproduct of
drilling crude oil and natural gas liquids-oriented wells in liquid rich
basins onshore, which is contributing to an oversupplied market. As of
mid- October 2012, natural gas was trading in the U.S. in the $3.40 to
$3.60 per Mcf range which is up from the $2.85 to $2.95 range in midJuly 2012. Oversupplied natural gas inventories in the U.S. exert
downward pricing pressures on natural gas prices in the U.S. Prolonged
periods of oversupply of natural gas (whether from conventional or
unconventional natural gas production or gas produced as a byproduct
of crude oil production) will likely continue to suppress prices for natural gas, although over the longer term, relatively
low natural gas prices may also lead to increased demand for the resource. High onshore gas production along with a
prolonged downturn in natural gas prices can negatively impact the offshore exploration and development plans of
E&P companies, which in turn, would suppress demand for offshore support vessel services, primarily in the Americas
segment (specifically Tidewater’s U.S. operations where natural gas is the more prevalent exploitable hydrocarbon
resource).
www.marcon.com
49
Deepwater activity continues to be a significant segment of the global offshore crude oil and natural gas markets, and
deepwater activity has also been a source of growth for Tidewater. Deepwater activity in non-U.S. markets did not
experience significant negative effects from the 2008-2009 global economic recession, largely because deepwater oil
and gas development typically involves significant capital investment and multi-year development plans. Such projects
are generally underwritten by the participating exploration, field development and production companies using
relatively conservative assumptions relating to crude oil and natural
gas prices. These projects are, therefore, considered less susceptible
to short-term fluctuations in the price of crude oil and natural gas.
During the past few years, worldwide rig construction increased as rig
owners capitalized on the high worldwide demand for drilling and lower
shipyard construction and financing costs. Reports published by IHSPetrodata in mid-October 2012 indicate that the worldwide movable
offshore drilling rig count (currently estimated at approx. 862, approx.
45% of which are designed to operate in deeper waters), will increase
as approx. 200 new-build offshore rigs that are currently on order and
under construction, most of which will be delivered within the next
three years. Of the estimated 862 movable offshore rigs worldwide, approx. 630 are currently working. It is further
estimated that approx. 54% of the new-build rigs are being built to operate in deeper waters, suggesting that the
number of rigs designed to operate in deeper waters could grow in the coming years to nearly 50% of the market.
Investment is also being made in the floating production unit market, with approx. 72 new floating production units
currently under construction and expected to be delivered primarily over the next three years to supplement the
current approx. 354 floating production units worldwide.
According to IHS-Petrodata, the global offshore supply vessel market in mid-October 2012 had 439 new-build
offshore support vessels (PSVs and AHTSs only) under construction, most of which are expected to be delivered to
the worldwide market within the next two and one half years. The current worldwide fleet of these classes of vessels is
estimated at 2,808 vessels, of which Tidewater estimates more than 10% are stacked. An increase in worldwide
vessel capacity without a corresponding increase in vessel demand would tend to have the effect of lowering charter
rates. Effects of vessel oversupply are particularly acute when reduced
market prices for oil lead to lower levels of exploration, field
development and production activity. The worldwide offshore marine
vessel industry, however, also has a large number of aged vessels
including over 700 vessels, or approx. 26%, of the worldwide offshore
fleet are at least 25 years old and nearing or exceeding original
expectations of estimated economic lives. These older vessels, up to
50% of which Tidewater estimates are already stacked, could
potentially be removed from the market within the next few years if the
cost of extending the vessels' lives is not economically justifiable.
Although the future attrition rate of these aging vessels cannot be
determined with certainty, Tidewater believes that the retirement of a
sizeable portion of these aged vessels could mitigate the potential
combined negative effects of new-build vessels on vessel utilization and vessel pricing. Additional vessel demand
could also be created by addition of new drill rigs and floating production units expected to be delivered and become
operational over the next few years, which should help minimize possible negative effects of the newbuild OSVs being
added to the offshore support vessel fleet.
At September 30, 2012, Tidewater had 321 owned or chartered
vessels (excluding joint-venture vessels and vessels withdrawn
from service) in its fleet with an average age of 12.9 years. The
average age of 222 newer vessels that have been acquired or
constructed since calendar year 2000 as part of Tidewater's newbuild and acquisition program is 5.6 years. The remaining 99
vessels have an average age of 29.4 years. During the six months
ended September 30, 2012 and 2011, Tidewater's newer vessels
generated $547.9 million and $422.1 million, respectively, of
revenue and accounted for 97%, or $248.2 million, and 91%, or
$171.5 million, respectively, of total vessel margin (vessel
revenues less vessel operating costs). Vessel operating costs
associated with Tidewater's new vessels exclude depreciation of
$61.3 million and $53.0 million, respectively, during same comparative periods.
www.marcon.com
50
Tidewater's consolidated net earnings for first half fiscal 2013 increased 277%, or $54.5 million, compared to the same
period in fiscal 2012, primarily due to an approx. 20% increase in total revenues, which was partially offset by a 9%, or
$29.3 million, increase in vessel operating costs, and a $16.2 million, or 207%, increase in income tax expense as a
result of incurring higher earnings before taxes during the comparative periods. In addition, $30.9 million non-cash
goodwill impairment ($22.1 million after-tax) was recorded during second quarter fiscal year 2012 on Tidewater's
Middle East/ North Africa segment. Tidewater recorded $606.4 million in revenues during first half fiscal 2013, which is
an increase of $100.9 million over the revenue earned during the same period fiscal 2012, due to a 17% increase in
Tidewater’s total average day rates and an approx. seven percentage point increase in total vessel utilization.
Increases in average day rates is attributable to higher demand for Tidewater’s vessels as a result of increased E&P
activity by Tidewater’s customers due to upward trending oil prices as well as the operation of newer, more
sophisticated vessels.
Vessel revenues generated by Tidewater's Americas
segment decreased 2%, or $2.6 million, during first half
fiscal 2013 compared to the revenues earned during the
same period in fiscal 2012, primarily due to a $6.9 million
and $3.7 million decrease in revenues earned on the towing
supply/supply and other classes of vessels, respectively.
These decreases in revenue were partially offset by an $8.0
million increase in revenue generated by deepwater vessels
during the same comparable periods. Americas-based
vessel operating costs decreased a modest 1%, or $0.9
million, during first half fiscal 2013 compared to the same
period in fiscal 2012. Total utilization rates for the Americasbased vessels increased 5 percentage points, during first half fiscal 2013 as compared to the first half in fiscal 2012;
however, this increase is primarily a result of the sale of 25 older, stacked vessels from the Americas fleet during the
eighteen month period ended September 30, 2012. Vessel utilization rates are calculated by dividing the number of
days a vessel works by the number of days the vessel is available to work. As such, stacked vessels depressed
utilization rates during the comparative periods because stacked vessels are considered available to work, and as
such, are included in the calculation of utilization rates. Within the Americas segment, Tidewater continued to stack,
and in some cases dispose of, vessels that could not find attractive charters. At the beginning of fiscal 2013, Tidewater
had 21 Americas-based stacked vessels. During the first six months of fiscal 2013, Tidewater stacked five additional
vessels, sold one vessel from the previously stacked vessel fleet and put one previously stacked vessel back to work
resulting in a total of 24 stacked Americas-based vessels as of September 30, 2012.
Vessel revenues generated by Tidewater’s Asia/Pacific segment increased
51%, or $32.9 million, during the first six months of fiscal 2013 as compared to
revenues earned during the same period in fiscal 2012, due to a 22 percentage
point increase in utilization rates and a 73% increase in average day rates on
the deepwater vessels (providing a $21.7 million increase in deepwater vessel
revenues) along with a 10% increase in average day rates on towing supply/
supply vessels (which provided an $11.4 million increase in revenue on this
class). Vessel operating costs for the Asia/Pacific segment increased 21%, or
$9.8 million, during the same comparative periods. Within the Asia/Pacific
segment, Tidewater continued to dispose of vessels that could not find attractive charters. At the beginning of fiscal
2013, Tidewater had 16 Asia/Pacific-based stacked vessels. During the first six months of fiscal 2013, Tidewater
stacked no additional vessels and sold four vessels from the previously stacked vessel fleet, resulting in a total of 12
stacked Asia/Pacific-based vessels as of September 30, 2012.
Vessel revenues generated by Tidewater’s Middle East/North Africa segment increased
27%, or $13.6 million, during the first six months of fiscal 2013 as compared to the
revenues earned during the same period in fiscal 2012, primarily due to a 20 percentage
point increase in utilization rates and a 22% increase in the average day rates on the
towing supply/supply vessels operating in this segment. During the first half of fiscal 2013,
vessel operating costs for the Middle East/North Africa segment decreased 4%, or $1.4
million, as compared to the same period in fiscal year 2012. At the beginning of fiscal
2013, Tidewater had seven Middle East/North Africa-based stacked vessels, and during
the first six months of fiscal 2013, Tidewater did not add to or sell vessels from the
previously stacked vessel fleet, resulting in a total of seven stacked Middle East/North Africa-based vessels as of
September 30, 2012.
www.marcon.com
51
Vessel revenues generated by Tidewater’s Sub-Saharan Africa/Europe segment increased 24%, or $54.3 million,
during the first six months of fiscal 2013 as compared to revenues earned during the same period in fiscal 2012,
primarily due to a $46.2 million increase in deepwater vessel revenue as a result of a 17% increase in average day
rates and an increase in the number of deepwater vessels operating in this segment resulting from the addition of new
vessels and vessels mobilizing in. Also included in fiscal 2013 second quarter revenues are retroactive rate increases
(retroactive to January 1, 2012) on certain vessel charter agreements for which Tidewater recognized a total of $7.4
million of revenues related to services provided during the six-months ended June 30, 2012. Revenue on the towing
supply/supply class of vessel contributed $11.2 million to increase of revenue during the same periods due to a 12%
increase in average day rates. Vessel operating costs for Sub-Saharan Africa/Europe increased 17%, or $21.8 million,
during the same comparative periods. Total utilization rates for the Sub-Saharan Africa/Europe-based vessels
increased 4 percentage points during the first half of fiscal 2013 as compared to the first half in fiscal 2012; however,
this increase is a result of the sale of 19 older, stacked vessels from the Sub-Saharan Africa/Europe-based vessel
fleet during the eighteen month period ended September 30, 2012. Within the Sub-Saharan Africa/Europe segment,
Tidewater also continued to stack, and in some cases dispose of, vessels that could not find attractive charters. At the
beginning of fiscal 2013, Tidewater had 23 Sub-Saharan Africa/Europe-based stacked vessels. During the first six
months of fiscal 2013, Tidewater stacked three additional vessels and sold eight vessels from the previously stacked
vessel fleet, resulting in a total of 18 stacked Sub-Saharan Africa/Europe-based vessels as of September 30, 2012.
At September 30, 2012, Tidewater had four 7,100BHP towing supply/supply vessels under construction at an
international yard, for a total expected cost of $75.1 million. The vessels are expected to be delivered beginning in July
2014 with final delivery in November 2014. As of September 30, 2012, Tidewater invested $13.8 million for these
vessels. Tidewater is also committed to construction of two 246’, one 261’, eight 275’, four 286’ and two 300’
deepwater PSVs for a total estimated cost of $541.6 million. One U.S. located shipyard is constructing the 261’
deepwater class vessel and a different U.S. yard is constructing two 300’ deepwater PSVs. Two different international
shipyards are each constructing four 275’ deepwater PSVs, and a fourth international yard is constructing three 286’
deepwater PSVs. The 261’ deepwater PSV has an expected delivery in March 2014. The eight 275’ deepwater class
vessels are expected to be delivered beginning January 2014, with final delivery in January 2015. Tidewater took
delivery of the first 286’ deepwater class vessels in October 2012 with final delivery of the last 286’ vessel scheduled
for March 2013. The two 300’ deepwater class vessels are scheduled for
delivery in August and December 2013. As of September 30, 2012,
$188.2 million was invested in these 17 vessels. Two vessels under
construction at a domestic yard have fallen substantially behind schedule.
Tidewater and the shipyard reached an agreement during the quarter
ended September 30, 2012 which includes an increase in the contract
price of each vessel, one or more change orders for each hull, among
other modifications to contract terms and extension of the delivery dates
by approx. seven and eight months, respectively. Tidewater is also
committed to construction of one 175’, fast supply boat, four water jet
crewboats, and two 215’ specialty vessels for a cost of $72.7 million. Three separate international shipyards are
constructing these vessels. Tidewater is experiencing a substantial delay with the FSV, which is under construction in
Brazil and originally scheduled to be delivered in September 2009. Tidewater continues to pursue arbitration. The four
water jet crewboats are expected to be delivered in February, April and June 2013. As of September 30, 2012,
Tidewater had invested $41.8 million for the construction of these vessels. At September 30, 2012, Tidewater agreed
to purchase two PSVs for an aggregate approx. total purchase price of $47.5 million. Tidewater took possession of
both PSVs in October 2012 for $19.2 and 28.3 million, respectively. The first PSV has 3,500 DWT cargo capacity and
the second 3,100DWT cargo capacity. As of September 30, 2012, Tidewater had invested $7.0 million to acquire
these two vessels.
During first half fiscal 2013, Tidewater disposed of 16 vessels, including seven AHTS vessels and four PSVs. Five of
the 16 vessels were disposed from the Asia/Pacific fleet, two from Americas fleet, eight from Sub-Saharan
Africa/Europe and one from the Middle East/North Africa fleet. During the same period 2012, Tidewater disposed of 36
vessels, including 28 AHTSs and six PSVs. During first half of fiscal 2013, Tidewater took delivery of four new built
vessels and acquired four vessels from third parties. Two of the delivered vessels are 286’, deepwater, PSVs, both
constructed at an international shipyard for a total cost of $58.7 million. The other two vessels delivered are AHTS
vessels that have 8,200BHP. These two vessels were constructed at different international yards for a total cost of
$47.5 million. Tidewater also acquired three deepwater, PSVs and one towing supply/ supply class PSV for a total cost
of $75.3 million. These vessels range between 220’ to 250’. The acquired towing supply/supply class PSV vessel was
originally sold and leased back in fiscal year 2006. Tidewater elected to repurchase this vessel from the lessor for a
total $8.9 million in September 2012.
www.marcon.com
52
Quarterly Utilization and Average Day Rates for Tidewater Inc.
Americas Fleet
Towing-Supply/Supply
Offshore Tugs
New Vessels
Traditional Vessels
Asia Pacific Fleet
Offshore Tugs
New Vessels
Traditional Vessels
Mid-East / No. Africa Fleet
Offshore Tugs
New Vessels
Traditional Vessels
Sub-Sahara Africa / Europe
Offshore Tugs
New Vessels
Traditional Vessels
Americas Fleet
Offshore Tugs
New Vessels
Traditional Vessels
Asia Pacific Fleet
Offshore Tugs
New Vessels
Traditional Vessels
Offshore Tugs
New Vessels
Traditional Vessels
Offshore Tugs
New Vessels
Traditional Vessels
Domestic
Towing-Supply
Americas Fleet
Offshore Tugs
New Vessels
Traditional Vessels
International
Towing-Supply
Offshore Tugs
Asia Pacific Fleet
Offshore Tugs
New Vessels
Traditional Vessels
Offshore Tugs
New Vessels
Traditional Vessels
Offshore Tugs
New Vessels
Traditional Vessels
30-Sep
2012
30-Jun
48.20%
53.40%
79.80%
36.10%
85.30%
41.80%
52.20%
54.90%
84.20%
0.00%
93.60%
0.00%
71.20%
77.20%
84.80%
37.50%
89.50%
46.00%
67.80%
60.30%
86.80%
36.70%
83.70%
31.60%
$14,103
$14,135
$20,771
$8,203
$19,119
$8,318
$12,663
$14,229
$20,109
$0
$19,384
$0
$9,857
$9,812
$12,453
$7,179
$12,388
$7,186
$15,721
$13,572
$15,332
$8,773
$13,680
$8,331
31-Mar
2011
31-Dec
30-Sep
30-Jun
Utilization
31-Mar
2010
31-Dec
30-Sep
30-Jun
31-Mar
2009
31-Dec
53.10%
38.70%
87.30%
41.30%
54.20%
23.60%
90.10%
37.70%
42.90%
19.30%
85.60%
36.20%
43.30%
20.00%
86.80%
35.10%
48.30%
20.00%
87.40%
36.10%
41.00%
16.40%
83.40%
30.20%
42.70%
17.00%
84.70%
31.10%
39.30%
16.80%
82.00%
29.20%
40.80%
25.10%
76.50%
32.20%
43.30%
19.80%
75.70%
34.70%
43.10%
100.00%
81.00%
10.40%
43.80%
100.00%
83.10%
10.20%
36.30%
100.00%
69.80%
8.20%
42.50%
100.00%
80.80%
16.80%
43.50%
100.00%
79.30%
22.00%
46.80%
100.00%
79.70%
31.70%
46.50%
100.00%
69.70%
34.00%
49.70%
100.00%
87.80%
37.60%
53.00%
93.30%
82.40%
44.40%
69.80%
76.40%
66.30%
73.30%
50.00%
83.90%
55.90%
59.20%
50.00%
68.20%
59.60%
49.70%
50.00%
58.60%
55.90%
57.60%
63.20%
69.10%
54.30%
66.60%
58.80%
79.70%
61.30%
72.50%
59.70%
93.00%
59.70%
71.70%
60.00%
87.70%
63.40%
64.80%
59.60%
70.20%
66.20%
66.50%
55.60%
77.90%
60.90%
66.60%
71.80%
70.20%
67.10%
55.60%
72.60%
82.20%
32.10%
58.10%
69.00%
84.80%
36.10%
55.80%
57.90%
60.80%
62.00%
86.80%
88.00%
33.70%
33.80%
Average Day Rates
60.00%
60.30%
87.80%
35.80%
62.50%
73.30%
89.70%
41.70%
62.60%
66.10%
89.80%
41.60%
63.20%
74.60%
88.20%
45.20%
66.90%
68.60%
87.00%
51.20%
70.90%
70.60%
91.60%
51.70%
$13,704
$9,613
$19,096
$8,851
$13,812
$8,525
$18,863
$8,655
$14,786
$6,318
$19,469
$8,650
$14,031
$6,332
$18,849
$9,958
$14,411
$6,341
$18,400
$10,115
$13,741
$6,342
$20,078
$9,757
$13,603
$6,383
$20,073
$10,264
$13,005
$6,345
$20,247
$10,416
$11,742
$7,261
$20,928
$8,914
$12,036
$6,775
$22,095
$8,442
$13,751
$10,000
$20,247
$3,642
$12,836
$9,709
$17,395
$3,749
$11,974
$9,236
$15,028
$3,953
$12,519
$9,709
$16,716
$4,232
$12,688
$9,709
$18,332
$5,195
$12,305
$9,426
$18,880
$5,769
$12,917
$9,426
$20,235
$6,361
$12,117
$9,426
$19,503
$6,320
$11,441
$9,497
$19,313
$6,725
$11,782
$0
$21,494
$7,176
$8,992
$5,194
$11,657
$7,377
$8,604
$5,127
$12,337
$7,174
$8,513
$5,117
$13,562
$6,759
$7,738
$5,302
$12,496
$6,259
$7,693
$5,235
$12,325
$6,414
$7,595
$5,226
$11,028
$6,442
$7,522
$5,262
$10,983
$6,591
$7,401
$5,205
$13,526
$6,835
$7,046
$5,751
$16,636
$6,293
$7,752
$6,818
$17,647
$7,043
$13,479
$6,705
$14,098
$8,353
$13,004
$12,665
$12,812
$11,848
$6,620
$6,751
$7,110
$6,836
$12,921
$12,134
$11,907
$11,077
$8,226
$8,313
$7,970
$7,537
Average Vessel Count (excluding stacked)
$11,563
$6,930
$11,022
$7,274
$11,784
$6,541
$11,164
$7,268
$12,306
$6,528
$11,506
$7,319
$13,472
$6,780
$12,467
$7,738
$13,185
$6,552
$12,331
$8,096
24
46
19
43
21
57
5
41
24
52
6
42
24
57
5
41
26
65
5
39
30
70
6
39
31
70
6
45
35
70
6
45
33
42
42
25
81
7
40
50
200
27
29
0
28
8
114
14
31
1
38
1
32
1
37
1
30
3
40
1
30
3
38
1
27
3
42
1
30
6
44
1
32
10
43
1
27
4
27
8
31
6
27
9
29
6
27
11
30
6
25
13
33
6
24
17
30
6
18
20
30
6
14
22
31
6
15
22
115
15
74
13
113
18
72
12
105
20
76
13
102
23
79
13
104
23
82
14
103
27
83
14
99
29
83
14
97
32
www.marcon.com
37
55
206
25
23
18
43
0
23
21
21
27
11
23
26
6
7
25
8
28
94
36
82
13
91
41
87
44
53
Trinity Industries of Dallas, Texas, reported net income attributable to Trinity
stockholders of $63.2 million for the third quarter ended September 30, 2012. Net
income for the same quarter of 2011 was $31.9 million. Revenues for third quarter
2012 increased 19% to $937.5 million compared to revenues of $791.1 million for the
same quarter of 2011. Trinity reported an operating profit of $141.9 million in the third quarter of 2012, a 35% increase
compared to an operating profit of $105.4 million for the same quarter last year. “I am pleased with our third quarter
2012 results, which represent the Company's eighth consecutive quarter of combined year-over-year revenue and
earnings growth,” said Timothy R. Wallace, Trinity's Chairman, CEO and President. “During the quarter, our portfolio of
businesses performed well, especially those serving the North American oil, gas, and chemical industries.” “We made
solid progress during the quarter leveraging our manufacturing flexibility to reposition a portion of our production
capacity to meet growing demand in these industries,” Mr. Wallace continued. “During the short term, repositioning
requires up-front investment and causes operating inefficiencies that will impact results through the end of this year. In
the long term, our repositioning enhances our ability to better serve our customers. Our outlook for 2013 remains
optimistic. We are anticipating long production runs, resulting in additional operating leverage in our businesses that
support the oil, gas, and chemical industries.” The Inland Barge Group reported revenues of $166.5 million compared
to revenues of $143.2 million the third quarter 2011. The increase in revenues
was due to higher volumes and a change in mix of barge types. The increased
volume was partially due to the recovery from flooding that reduced production
levels in the third quarter of last year. Operating profit for this Group was $26.9
million in the third quarter of 2012 compared to $26.0 million in the third quarter
of 2011. Third quarter 2011 operating profit included a $3.1 million net gain from
flood-related insurance recoveries. During the third quarter of 2012, the Inland
Barge Group received orders of $162 million, and as of September 30, 2012
had a backlog of $537 million compared to a backlog of $542 million as of June
30, 2012.
Conrad Industries, Inc. of Morgan City, Louisiana net income for the third quarter of 2012 ending September 30th was
$4.4 million compared to net income of $3.5 million during the third quarter of 2011. Conrad had net income of $12.9
million for the nine months ended September 30, 2012 compared to net income of $12.4 million for the nine months
ended September 30, 2011. During the first nine months of 2012, Conrad added $183.5 million of backlog to its new
construction segment compared to $135.8 million added to backlog during the first nine months of 2011. Backlog at
September 30, 2012 was $104.4 million compared to $87.7 million at September 30, 2011, $47.1 million at December
31, 2011, and $57.2 million at June 30, 2012. Conrad Industries has signed $58.7 million of new contracts since
September 30, 2012.
In just under three months, Vigor Marine in Portland, Oregon replaced the bow of the 369’ x 72’ x 28’ “Olympic Spirit”,
an 80,000bbl double-hull, ocean petroleum barge owned by Harley Marine subsidiary, Olympic Tug & Barge, Inc.
Meeting the aggressive schedule has helped keep Harley’s fleet in the water where it needs to be to continue to
provide quality marine services. “This was a very unique project that you just can’t do in any shipyard,” said Harley
Franco, Founder & CEO of Harley Marine Services. “So we went to Vigor,
who we thought would be the best facility and the best place on the West
Coast to meet that challenge. The size of this bow, how to stage the job
effectively and get us back out to sea as quickly as possible were major
considerations. How our organizations worked together to accomplish our
goals was, to me, a testimony to innovation. It all went into place very, very
well. Vigor exceeded our expectations.” The bow replacement of “Olympic
Spirit” was necessitated by some mistakes that were made during the original
construction of the barge. Harley worked closely with naval architect, Elliott
Bay Design Group, on the most effective strategy to bring “Olympic Spirit”
up to Harley’s standards of excellence. It was decided a total bow
replacement was the best solution. Solid teamwork was a key component to
the success of this significant and complex project. The 300-ton bow module was pre-built in a section of Vigor’s
150,000 square feet of fabrication bays in its Swan Island shipyard allowing the barge to continue operations. As the
module neared completion, the “Olympic Spirit” was transported to the Portland yard and lifted by one of Vigor’s
versatile drydocks, purchased through Marcon International in 2006, and positioned at the end of a 800’ long buildway. There the existing bow was removed and the new module was attached. The excellent design work provided by
Harley and Elliott Bay allowed Vigor Marine teams to retain the forward collision bulkhead both speeding and
simplifying installation.
www.marcon.com
54
Recent News – Latin America & Caribbean
Redwise Maritime Services BV is currently delivering the
33.2m x 9.76m x 4.3m depth, twin screw tug “Clara B” (exTarget 3, Sapor 45) and tow on a 10,600nm voyage from Sibu,
Malaysia to Montevideo, Uruguay on behalf of Paranave SA of
Paraguay. The 3,200HP tug was built in 2011 by Sapor
Shipbuilding Industries Sdn Bhd in Sibu, Malaysia. Tug is
powered by a pair of 1,193kW Cummins KTA-50-M2 diesels
developing a bollard pull of abt. 40 tons. Tug, tow and the seven
man crew departed from the shipyard on 27th September for
Singapore where stores, bunkers and water were replenished
along with towing gear and wire replaced for the long trip to Cape Town and West Africa via the South Cocos Islands
to find some shelter to check the barge and it’s running lights with the assistance of a couple of meters of duct tape. By
9th November the tow was lying offshore Mauritius to re-arrange the towing gear and adjust main engine settings –
which brings back memories as I remember 32 years ago on a tug supply boat rolling our decks under while briefly at
anchor off Mauritius with an eastbound tow from Pointe Noire,
Republic of Congo around Cape Horn and beating our way across
the Indian Ocean and into Singapore……Also presently enroute for
Paranave SA under command of a Redwise crew is the 32.4m x
9.15m x 4.48m tug “Raul D” (ex-Fordeco 87, Sapangar SS018) and
tow from Lahad Datu, Malaysia to Nuevo Palmira Uruguay. “Raul D”
was built earlier this year by Sapangar Shipyard Sdn Bhd in Lahad
Datu and like the “Clara D” above powered by a pair of Cummins
KTA-50M2 diesels developing a bollard pull of abt. 42 tons.
Fairmount Marine’s tug “Fairmount Sherpa” has delivered rig “Atwood Condor” to
Port of Spain, Trinidad. The semi-submersible rig was towed from Port Louis,
Mauritius, over a distance of 8,100 nautical miles with an average speed of 8.5
knots. The “Atwood Condor” is a 2012 Singapore built dynamically positioned semisubmersible drilling unit capable of operating in 3,050 meters of water and drilling
depths up to 12,200 meters. The 118m long state-of-the-art rig has an
accommodation capacity for up to 200 persons. The rig is owned by Atwood
Oceanics, headquartered in Houston, Texas. Before crossing the Atlantic Ocean
“Fairmount Sherpa” and her tow made a planned four days stop-over at Walvis Bay,
Namibia. During this stop-over the “Fairmount Sherpa” performed several cargo and
passengers runs between the rig and the port.
On 7th November, Harms Bergung’s 100 ton
bollard pull AHT “Pegasus” assisted with an
emergency tow of the Liberian flag, 229.0m x 32.3m
x 20.1m, 81,652dwt bulk carrier “Blumenau” off
Recife, Brazil to a safe anchorage in Natal, Brazil.
The 48.8m x 14.1m, 8,000HP “Pegasus” was
mobilized from Rotterdam to tow the 122m x 30m
derrick / pipelay barge “Global Iroquois” from Natal,
Brazil to Cameron, Louisiana on behalf of Technip.
The Panama Canal Authority (ACP) awarded the contract to build a bridge on the Atlantic side of the Canal to Vinci
Construction Grands Projets of France who offered the lower price of US$ 365,979,472 and selected as the
contractor to build the bridge. The bridge design is inspired on similar infrastructure work in countries such as Spain,
Korea, France, China and Japan. The double-plane, twin pylon, cable-stayed bridge will feature two lanes of traffic in
each direction. Its length will be 4.6km and it will stand 75m above sea level. The bridge will be located 3km North of
Gatun Locks and the new Post-Panamax locks on the Atlantic side province of Colon. The bridge will be built with
reinforced concrete. Odebrecht - Hyundai Joint Venture (Brazil - Korea) and Acciona Infraestructuras - Tradeco
(Spain - Mexico) were also pre-qualified and presented offers of US$ 429,633,298 and US$ 386,619,316.04
respectively.
www.marcon.com
55
Grupo TMM, S.A.B., reported financial results for third quarter of 2012. José F. Serrano,
Chairman and CEO of Grupo TMM, said, “In the 2012 third quarter we secured three new
vessel contracts, which are worth a total of $30 million in revenue. These new contracts
demonstrate the resilient nature of the Company´s Maritime division, despite the global
downturn in this industry. To date, the Maritime division´s backlog is $175.6 million.”
“While 2012 third-quarter consolidated revenue decreased compared to the 2011 period,
primarily as a result of lower tariffs and lower utilization at the product tanker segment and reduced operations at
Acapulco, our Maritime division continues to generate important EBITDA margins.” Serrano concluded, “We believe
the future holds profitable opportunities for Grupo TMM. Although it has taken longer than anticipated, we expect to
reach an agreement for the financing of the development of a container terminal at Tuxpan before year end.
Additionally, we are working on a potential joint venture with an international shipyard, which would provide the
necessary capabilities to build vessels at our own shipyard. These additional capabilities would position TMM in a new
niche market of building vessels, for the Company or for third parties. Both of these projects will significantly grow our
revenue and profit base in the longer term.”
Compared to the same period last year, consolidated revenue in the 2012 third quarter decreased 3.0%. Third-quarter
2012 consolidated operating profit was $11.1 million, increasing 85.0% compared to $6.0 million recorded in the third
quarter of 2011. Consolidated EBITDA in the 2012 current quarter was $23.7 million, improving 26.1% compared to
$18.8 million in the same period of last year.
Maritime revenue increased 0.4% in the 2012 third quarter compared
to the same period last year, due to improvements at all segments
except for product tankers, which was impacted by one unemployed
vessel for half of the 2012 third quarter, by lower average daily tariffs
compared to the third quarter of last year, and by two less vessels in
operation, which had been leased in
the 2011 third quarter. Maritime
operating profit increased 2.8% in the
2012 third quarter compared to the
same period of last year as a result of profit improvements at offshore and lower costs
at harbor tugs compared to the 2011 third quarter, during which an additional vessel
was leased to substitute two of the fleet´s tugboats while in dry dock. The operating
profit increase in the 2012 third quarter was partially offset by an operating loss at
product tankers and by higher costs at chemical tankers due to the addition of a leased
vessel in September, to substitute one of the fleet´s tankers while in dry dock.
TMM is the major shipping company that provides transport services for chemicals, molasses and vegetable oils
between Mexican and US ports in the Gulf of Mexico. It operates a modern fleet of two chemical tankers equipped with
stainless steel and Marine Line coated tanks and heating and cleaning systems which permit the suitable and safe
handling of every product TMM transports. Since 1992 Grupo TMM has provided transportation of clean petroleum
products for “Pemex Refinación” in cabotage trades and for third parties in international trades. Its operations are
carried also in the international market out in compliance with the highest international standards in order to ensure a
safe and reliable operation to its customers.
Grupo TMM currently operates a fleet of six product and two
chemical tankers, about nine AHTSs, six crew/supply vessels and
nine PSVs. Since 1997 Grupo TMM has offered a towing service
at the port of Manzanillo, Colima, Mexico’s busiest commercial
port. Grupo TMM has five tugs. Last March 16th, two new ASD
tugs were incorporated into Transportación Marítima Mexicana,
S.A de C.V.’s fleet. “V.B. Chihuahua” and Intertug S.A.’s
5,364BHP, 75 ton bollard pull “Tyr”, the latter 32m x 11.6m, 2011
built tug brokered through Marcon International on the short term
time charter to provide port towage, along with the other TMM tugs
at the Port of Manzanillo and the Maritime Terminal to receive
LNG.
www.marcon.com
56
Ultrapetrol (Bahamas) Limited, serving three markets (River Business, Offshore
Supply Business and Ocean Business), recorded third quarter 2012 revenues of $82.8
million as compared with $80.0 million in the same period of 2011. Adjusted EBITDA for
the third quarter 2012 was $9.1 million as compared with $13.3 million in the same
period of 2011. Adjusted net loss for the third quarter of 2012 was $(11.5) million, as compared with net loss of $(2.9)
million during the same period 2011. Third quarter 2012 adjusted net loss excludes a $(0.5) million loss for deferred
taxes on an unrealized foreign currency exchange gain on U.S. dollar-denominated debt of its Brazilian subsidiary in
the Offshore Supply Business and includes a $0.8 million gain related to the sale of six dry barges, which were leased
back to Ultrapetrol. Without these adjustments, the net loss for the third quarter of 2012 was $(12.9) million. Len
Hoskinson, Ultrapetrol's CFO, said, “To date, 2012 has been a challenging year due to the drought related weather
effects in our River Business. Third party sale of barges from our new building yard have partially compensated this
effect….” Felipe Menéndez, Ultrapetrol's President and CEO, stated, “… While it has been a very difficult year for our
River Business because of the severe drought, the new planting season has commenced very successfully and
experts anticipate very strong crops in the regions we serve for 2013. Our new building yard has achieved high
productivity levels and is fully employed building barges for us and third parties…. We look forward to a strong 2013
with an expanded and fuel efficient river fleet in operation, which we expect will meet high transportation demand …
and a good performance of our ocean feeder container service.”
Third quarter 2012 River Business segment adjusted EBITDA decreased to a
$(0.3) million loss from an $8.3 million gain when compared to the same period of
2011. This quarter's result had a combined effect of a severe drought that
affected soybean production in the region earlier in the year which reduced
significantly volumes of soy products transported, and by lower than usual water
levels in the Upper Paraguay River which translated into a 27% decrease in the
volume of cargo transported in third quarter 2012 compared with the same period
of 2011. Ultrapetrol’s operating costs in the River Business, particularly manning
and maintenance costs, have been impacted by salary increases and inflationary
pressure on costs not adjusted by a proportional devaluation of local currencies
with respect to the U.S. dollar. According to the United States Department of
Agriculture, the soybean crop in Paraguay for 2012 dropped to 4.0 million tons down from 8.4 million tons in 2011, a
decrease of 52% year over year. This decrease is mainly attributable to the effects of a severe drought and higher
than average temperatures in January and February 2012 in large parts of Argentina and central Brazil, as well as
Paraguay. Soybean, particularly the early variety crop in Paraguay, suffered severe impacts on yields. Compounding
this, low river levels limited the draft at which Ultrapetrol could operate through the Upper Paraguay River during the
third quarter. Ultrapetrol has partially offset lower prospects for agricultural products in the Hidrovia region for 2012 by
skewing cargo mix to include higher proportions of iron ore which produce lower margins. As a result, longer transit
times and fuel costs impacted substantially Ultrapetrol's operations of river activity. During third quarter 2012 river
levels through the Upper Paraguay River decreased earlier and even further than anticipated, which prevented
Ultrapetrol from loading as much iron ore as expected. Despite the severe drought the seeded area is expected to
continue to grow in 2013 and beyond fostered by strong prices of soybean and other agricultural commodities.
Argentina, Brazil, Bolivia, Paraguay and Uruguay are estimated to account for approx. 55% of world soybean
production in 2013, compared to 30% in 1995. This steady long-term growth trend represents an important demand
driver for Ultrapetrol's future River Business. Ultrapetrol continues to add capacity and implement various marginexpansionary initiatives to profitably capitalize on the long-term growing demand of the agricultural sector along the
Hidrovia which remains strong. Ultrapetrol's barge building shipyard, which it believes is one of the most modern in
South America, has been in operation since first quarter 2010. During third quarter 2012 Ultrapetrol delivered nine
barges in connection with contracts with third parties entered into during second quarter 2012: In addition to these
contracts, in the third quarter Ultrapetrol entered into another contract to build seven tank and seven dry barges for a
total of $20.3 million. These barges will be exported to Colombia and buyers have advanced a portion of the purchase
price. The yard will continue to be fully employed until the end first quarter 2013 addressing construction of barges to
be delivered under the shipbuilding contracts already signed and also barges for Ultrapetrol's own use. Ultrapetrol
successfully continued re-engining and re-powering programs that aim to change the engines on a substantial portion
of its line pushboats from diesel to heavy fuel. Having finalized re-engining two pushboats in second quarter 2012, six
heavy fuel-consuming pushboats are now in operation compared to only two pushboats a year ago. The next reengined pushboat is expected to commence operation within first quarter 2013 bringing the total to seven where
Ultrapetrol will have installed 17 out of a total of 25 new engines purchased. Ultrapetrol expects this program to lead to
substantial savings in fuel expense and to an increase in tow size and navigation speed which will enhance its
EBITDA margins in the future.
www.marcon.com
57
Recent News – Europe and Mediterranean
The tugs “VB Lanzarote” of 4.260BHP, “VB Alborán” and “VB
Mediterráneo” of 4.134BHP, from the fleet of Boluda Towage and
Salvage, based in Las Palmas, in November the perforation
platform “Constellation” that, transported by the ship “Truster”,
accessed to the port to be repaired, with its way-out preview in 40
days. The fleet of Boluda Towage and Salvage is specialized in
rescuing, during port maneuvers, big platforms and boats of
special transport, having assisted in the year past in the Port of
Las Palmas at 5 platforms of those characteristics. Boluda
Towage and Salvage, counts with a fleet of nearly 200 tugs, that
operate in the Peninsula, Canary Islands, France and West
Coast of Africa, to assist maneuvers in port and offshore…… Tugs from Boluda Towage and Salvage France, also
had to act urgently due to the big storm suffered by the coast of Marseille which originated that the Ferry Napoleon
Bonaparte, of 172m long and 30.4m beam, because of a violent knock of wind, broke all its moorings and drifted to go
to crash into the dock of the port of the French city, provoking a way of water. The tugs of Boluda France were alerted
urgently by the maritime competent authorities to go to rescue the “Napoleón
Bonaparte”. The maneuvers executed in the middle of a big storm, allowed the
stabilization of the boat and to maintain against the dock, till it was moored
again. As a precaution of the bad weather the fleet of tugs of Boluda France
was maintained in alert from Saturday the 27th, and it was on Sunday, about
0130am, due to the increase of the strength of the wind, when it has to
intervene to avoid a disaster of big dimensions. Thanks to the skill of the
maneuvers of rescue executed, there were neither victims nor any marine
pollution. Boluda Towage and Salvage has in Marseille a fleet of 11 tugs
assisting maneuvers in the port, salvage and pollution control.
On Monday 5th November 2012 Landfall Marine Contractor’s 36.0m x
11.4m, 44 ton bollard pull “Neptun 11” departed from Rotterdam with two
fully loaded barges with “contractor's materials” to Sierra Leone in West
Africa; meanwhile this convoy is crossing the Bay of Biscay and is
expected to arrive at her destination before the end of the month. After her
arrival in Sierra Leone and delivery of the present double tow, this 2011
built “beautiful lady” will pick up another flattop barge for the return tow to
Rotterdam again. The Bureau Veritas classed “Neptun 11” is powered by
a pair of Cummins KTA-50M diesels developing a total of 3,200BHP and
fitted with a double drum waterfall anchor handling / towing winch with
capacity for 1,000m and 800m 48mm tow wires……Throughout the past years, Avra Towage and Landfall have
cooperated on projects and recently
Landfall has taken Avra's strongest tug,
the 3,454HP, 50 ton bollard pull
“Compass”, on charter again to perform a
double Atlantic crossing with Fugro
Seacore / Van Oord’s 32m x 32m x
4.5m, eight independent leg, walking jackup platform “Wave Walker 1” loaded onto
a flattop-barge from Rotterdam to Brazil working on the Brazilian Suape Outer Channel project. The 2012 built
“WaveWalker 1” was developed by Fugro and Van Oord to move and operate in rough seas, surf zones, beaches and
other intertidal locations supporting activities such as installing pipelines
through surf zones, excavating trenches, geotechnical drilling and drilling
and blasting. Departure of this convoy was due to depart from Rotterdam
on 5th November 2012 and after delivery of the “Wave Walker 1” in
Brazil, the “Compass” will bring back the empty barge to Rotterdam
again……In early October, the “Neptune 11” departed from Rotterdam
with the 2008 built, 330’ x 110’ x 25’ depth flattop barge “H-331” bound
for Wismar on the German Baltic Sea coast.
www.marcon.com
58
On Friday September 21st, 2012 the new “JadeWeserPort”–Container
Terminal Wilhelmshaven was commissioned. During the official Opening
Ceremony, in the presence of 1,400 guests, Kotug´s 31.6m x 12.0m, 75 ton
bollard pull RotorTugs “RT Innovation” and “RT Pioneer”, both built by
Balenciaga, S.A. in Zumaia, Spain in 1999, performed symbolically the first
assistance of the container vessel “Maersk Laguna” into Germany’s only deep
water port. “JadeWeserPort” – Container Terminal Wilhelmshaven (CTW) in
Wilhelmshaven will be Germany's third largest container port on the German
North Sea coast. The rise in the number of containers transported, and in
particular the increasing size of the container ships (currently: 18,000 TEU)
must be catered to with suitable port structures. Wilhelmshaven is optimally
located. “JadeWeserPort” – Container Terminal Wilhelmshaven (CTW) with its short navigable channel of only 23nm
can handle fully loaded container ships up to 430m length, 58m width and drafts of 16.5m, at any time independent of
tide. The 1,725m long riverside quay can simultaneously handle large container ships and feeder ships. CTW expects
more than 30 container vessels until end of 2012. Earlier this year Kotug was awarded a 6 years towage concession
for the German container terminal.
Two new tugs, “Smit Kiwi” (ex-RT Samba) and “Smit Emoe”, have joined the
URS Belgie NV fleet. Last year URS won the concession for exclusive tugboat
assistance in the port of Zeebrugge again for a period of 7 years. With this new
concession URS had to upgrade the fleet from six 65 tons bollard pull tugs up
to four 80 plus tons bollard pull and two 65 tons bollard pull. As part of the
upgrade process “Smit Kiwi” and “Smit Emoe”, both 28.3m x 12.0m, 86 ton
bollard pull Rotortugs, joined URS’ fleet in the port. Both Rotortugs were built
by PT ASL Shipyard Indonesia in Batam
in 2011 as Hull No. 895 and No. 896
respectively, and are equipped with firefighting. Tugs are powered by three 1,760kW ABC 8DZC diesels developing a
total of 7,179HP. The 2009 and 2010 Damen built, 32.1m x 13.3m x 5.4m depth,
sea-going ASD tugs “Smit Tiger” and “Smit Lion”, both 96 tons bollard pull, are
also part of the upgrade but were transferred from other locations to Zeebrugge.
“Smit Tiger” and “Smit Lion” are powered by a pair of 2,710kW CAT C280-8
diesels developing a total of 7,370HP.
On Wednesday 19th September 2012 Tsavliris Salvage Group of Piraeus, Greece dispatched their 47.0m x 11.1m,
80 ton bollard pull salvage tug “Megas Alexandros” (ex-Tito Neri) from her Piraeus
salvage station for the towage of the 54,057dwt bulk carrier “Delos Ranger” laden
with 36,900mt of grain, disabled due to stern tube problems from Suez Gulf, Egypt
to Aqaba, Jordan. On Saturday 22nd September, the salvage tug arrived alongside
190.0m x 32.3m x 17.5m depth “Delos Ranger” and connected up, departing the
Suez anchorage the same day bound for Aqaba. Although the convoy encountered
bad weather and strong currents during the tow, both vessels safely arrived on
Wednesday 26th September. “Megas Alexandros” provided standby services to
th
“Delos Ranger” until 8 October whence the tug demobilized to Piraeus.
In October, Rimorchiatori Riuniti’s 81 ton bollard pull VSP anchor-handling
tug “Spinola” was contracted for a spot job in Tunisia in August 2012 to assist
the FPSO “Ikdam” off Sousse. The operation was conducted smoothly and to
full satisfaction of charterers. This was followed by “Spinola” once again
chartered to carry out final positioning of the FSO “Alba Marina” in Rospo
Mare field, Adriatic Sea. The scope of work was to maintain the 244.6 x 42.0
x 22.2m depth FSO in position for the time necessary to connect the
140,000dwt vessel to the mooring system. The job lasted 9 days at the end
of which 36.65m x 13.60m x 6.60m “Spinola” returned to Malta. “Spinola” was
built in 2009 by Armon Shipyards in Spain and powered by twin MaK
8M25s developing a total output of 7,180BHP.
www.marcon.com
59
Gigilinis Salvage & Towage’s 45.0m x 10m x 4.4m depth. 75 ton
bollard pull ocean salvage tug “Hellas” (ex-Petrola’s Seamaster 20,
Nego Prince) successfully completed towage of a N/B Hull from
Istanbul, Turkey to Leirvik, Norway. The voyage, which lasted
approximately 25 days, was concluded with the safe delivery of the
tow to her owners on the 12th of October 2012, after successfully
completing the challenging transatlantic tow of a 180m tanker from
Freeport, Bahamas to
Aliaga, Turkey. The
voyage lasted for approx. 50 days and was completed with safe delivery of
the tow to her owners on 21st September. “Hellas” has since been
positioned on salvage station in Falmouth, U.K. Tug was built in 1975 by
Matsuura Tekko Zosen K.K. in Osakikamijima, Japan and powered by a
pair of Fuji 8M34CH4C diesels developing a total of 5,200HP with fixed
pitch props in kort nozzles.
The “Eurosund” (ex-Formidable) was sold by Svendborg Bugser of Denmark to
her new owners Kiev Shipping & Trading Corp. during closing in Copenhagen,
Denmark on 16th of October 2012 and renamed “Mignon”. For over a decade, the
“Eurosund” was Svendborg Bugser’s largest tug at over 50 tons bollard pull and
was also considered as the flagship of their fleet during that time. Physical delivery
of the tug to her new owners took place at Lekhaven in the port of Rotterdam and
the delivery coincided with the closing. During her time under Svendborg Bugser
colors, “Eurosund” successfully sailed just short of half a million miles, well over half
of which were performed with tows. Add several months of project charters to that
tally and she proved to be one of the hardest working tug's Svendborg Bugser ever
had the pleasure to own. Time and tide waits for no man or no tug for that matter,
so “Eurosund” will eventually be replaced by a younger and larger tug at some point in the future. This is part of a
wider fleet re-generation program that Svendborg Bugser A/S has been employing in recent years. The 35.7m x 10.3m
x 4.9m depth twin screw tug was built as ocean going tugs equipped for harbor duties in 1979 by Richard Dunston
(Hessle) Ltd. in the U.K. “Formidable” was originally built for Alexandra Towing, along with her sister-tug
“Indomitable”, now sailing as the “Hibernia” for GPS Marine Contractors, Ltd.
The tugs are powered with a pair of Ruston 8RK3CM diesels developing a total of
3,500HP / 5,000IHP to controllable pitch props in nozzle rudders. Howard Smith
Towage purchased in late 1992 the old-line U.K. towage company Alexandra
Towing Co. Ltd. of the U.K. which had been involved in towage as early as 1833,
although not under this name. Adsteam Marine Ltd. acquired the Australian and
U.K. harbor towage and related assets of Howard Smith in 2001 and in 2006,
SvitzerWijsmuller, the wholly owned subsidiary of A.P. Moller-Maersk A.S. made
a cash offer for all the shares in Adsteam Marine Ltd., which was accepted.
Harms Bergung’s 58.5m x 14.8m, 19,000BHP AHT “Magnus” towed the jack-up rig “Ukraine” from
Kavala to Giresun through the Bosporus. The rig was especially changed by having her legs
shortened in order to fit under the bridges. The 200 ton bollard pull AHT “Magnus” was mobilized
from Rotterdam to execute this tow.
Farstad Shipping achieved an operating income of NOK 958.8 million for
the 3rd quarter. The operating profit (EBIT) was NOK 213.6 million. The profit
after taxes was NOK 122.8 million. The operating income at 30.09.12 was
NOK 2,798.0 million. Operating profit (EBIT) was NOK 578.3 million. The
profit after taxes was NOK 280.6 million. Farstad Shipping's fleet currently
consists of 56 vessels (29 AHTS, 24 PSV and 3 SUBSEA) and 5 PSV and 4
AHTS under construction. Farstad’s operations are managed from Aalesund,
Aberdeen, Melbourne, Perth, Singapore, Macaé and Rio de Janeiro with a
total of 2,000 employees engaged onshore and offshore. Photo is the
25,000BHP, 85m “Far Sovereign” with a bollard pull of 280 tons.
www.marcon.com
60
Compared with third quarter 2011, Bourbon posted revenues of €306.1 million, up 21.4%
(+13% at constant exchange rates) owing to addition of 31 vessels to their fleet. Growth is
especially substantial in the Shallow Water Offshore segment (+49.1%). Compared with
second quarter 2012, Bourbon’s revenues were up 5.6%, thanks to the three Marine
Services segments, and more particularly to Shallow Water (+10%). “In a favorable oil and
gas services market, Bourbon’s growth is in line with the Bourbon 2015 Leadership
Strategy. Average daily rates are rising regularly and apply to an ever growing fleet,” says Christian Lefèvre, Bourbon's
CEO. “Revenues from Shallow water offshore vessels segment are up sharply for the quarter at €92 million, driven by
a number of factors such as long-term contracts signed for three ‘Bourbon Liberty 300’ vessels in Asia and Persian
Gulf.”
Compared with third quarter 2011, revenues from Marine Services grew 27.1% to
€254.5 million from €200.3 million, also an improvement over second quarter 2012’s
€238.4 million. Third quarter 2012 ended up with 439 vessels (+ 21 vessels over Q3
2011) reporting an average utilization of 83.4% up 0.4% over the same time period,
but off slightly from Q2 2012’s utilization of 83.9% when 428 vessels were in the
fleet. In the first nine months of 2012, Marine Services’ revenues amounted to €715
million, up 24% over the same period in 2011.
Deepwater Offshore revenues were up 14% at €93.2 million
mainly due to increase in daily rates and impact of the dollar.
Compared to second quarter 2012, Deepwater revenues were up
5.2%. In Africa, Bourbon continues to benefit from increase in day
rates, in particular the signing of a new contract in Ghana for a
PSV and renewal of a PSV contract in Nigeria. North Sea activity
was disappointing over the summer, with low day rates and
utilization, mild weather and over-capacity of PSVs and AHTSs
increased by new built vessels on the market and return of vessels
working in Brazil. During the first nine months of 2012, revenues
reached €268.2 million, up 16.1% from same period 2011.
Compared with third quarter 2011, third quarter 2012 revenues posted by Shallow Water Offshore vessels were up
sharply (+49.1%) at €91.7 million, driven by increase in average daily rates (+8.6%), by growth of the fleet (+10
vessels in 12 months), improvement in the average utilization rate (+3.9 points) and by impact of the dollar. As a result
of Bourbon’s strategic choice to invest in this replacement market, the
percentage of revenues accounted for by Shallow Water Offshore vessels
rose further. Compared with the second quarter of 2012, revenues were up
10.0%, driven by the growth of the fleet, increase in average daily rates
(+3.9%) and commissioning of three “Bourbon Liberty 300” vessels (photo
left) under contract in Thailand and Qatar. It should be noted that the longterm contract signed in Qatar with Maersk Oil, which has unusually high
operating standards, points to the future need for replacement vessels
equipped with deepwater offshore technology in the Persian Gulf region. In
the first nine months of 2012, revenues reached €245.5 million, up 40.4%
over the same period in the prior year. This reflects commissioning of 9 new Bourbon Liberty vessels, a 6.3% increase
in average daily rates, slight improvement in average utilization (+2 points) and favorable impact of the dollar.
In 2013, demand for offshore vessels is expected to be steady, buoyed by
investments by oil and gas company clients which are expected to rise by around
13%. More than 60 new drilling rigs should be commissioned during 2013, and
order books of offshore construction companies and subsea production
equipment manufacturers are fuller than ever. In shallow water offshore, speeding
up the job of replacing old vessels on the market deemed obsolete seems vital for
oil and gas companies to meet increasing requirements in terms of risk
management. In deepwater offshore, the international fleet continues to grow,
with new vessels commissioned, mainly large PSVs. In line with its strategy of
factoring in risk of over-capacity, Bourbon has little exposure in this market and is
focusing on medium-sized vessels, for which there is always a high demand on global markets.
www.marcon.com
61
Maersk delivered a profit of US$ 933m (US$ 371m) and a return on invested capital (ROIC) of
8.3% (4.9%) for Q3. Cash flow from operating activities was US$ 2.9bn (US$ 2.1bn) and cash
flow used for capital expenditure was US$ 678m (US$ 4.8bn). The Group’s equity ratio was
52.2% (51.9%) and net interest-bearing debt was US$ 14.8bn (US$ 14.5bn). The third quarter
result was better than expected, particularly in Maersk Line and Maersk Oil, while the result
was negatively affected by vessel impairments of US$ 267m on some of Maersk Tankers’
crude and product tanker segments. The divestment of the FPSO “Maersk Peregrino” resulted
in a divestment gain of US$ 177m, recognized in Q3.
Maersk Oil’s profit for the period was US$ 243m (US$ 368m). The result was negatively impacted by a 23% decline in
share of production to 240,000 barrels of oil equivalent per day (312,000 boepd), a lower average oil price of US$ 109
per barrel (US$ 113/bbl), as well as a change in the decommissioning relief tax in the UK. Maersk Oil completed three
exploration/appraisal wells (five wells) and exploration costs were US$ 268m (US$ 336m). The Caporolo discovery
offshore Angola was announced. APM Terminals’ profit for the period was US$
160m (US$ 173m) and EBITDA margin was at 23.5% (23.2%). Volume throughput
increased by 4% to 9.0m TEU (8.6m TEU), equivalent to a 2% increase on a likefor-like basis. Positive developments in Africa and Americas were able to offset
reductions in the ports servicing the Asia – Europe trade. APM Terminals signed an
agreement to acquire a co-controlling 37.5% ownership interest in the publicly listed
company Global Ports Investments PLC. Subject to regulatory approvals, the
transaction is expected to close in 2012. Maersk Drilling’s profit for the period was
US$ 87m (US$ 139m). The result was negatively impacted by delayed start-up and
maintenance yard stays of two units. Maersk Drilling has contract coverage of
100% of the available rig days for the remainder of 2012 and 97% for 2013. Maersk Supply Service’s result was US$
48m in Q3 (US$ 80m) and cash flow from operating activities was US$ 105m (US$ 111m). ROIC was 8.9% (14.3%).
The market in the AHTS, PSV and subsea support segments continued to be competitive during Q3. Especially the
North Sea market experienced less seasonal activity and a large supply of vessels led to pressure on day rates and
utilization. Main areas of operation remain Brazil (29% of revenue) and Africa (26% of revenue) with demand for high
end tonnage and a number of new contracts and extensions being completed during Q3. Maersk Supply Service has
in Q3 concluded a contract with a major oil company on the East Coast of Canada for two years with a total value of
approximately US$ 35m. The contract adds to Maersk Supply Service’s leading position in the Canadian market.
Within the emergency response and rescue segment Esvagt has achieved nearly full employment during Q3. Two new
Esvagt vessels have been delivered. Both are on fixed contracts in Norway, for eight years and ten years respectively.
Contract coverage for the remainder of 2012 is 83% and for 2013 56% excluding options.
Svitzer’s profit was US$ 33m in Q3 (US$ 26m), an increase of 29% compared to
Q3 2011, primarily driven by Harbor Towage tariff increases. ROIC was 8.1%
(6.1%). Activity in Svitzer’s
Harbor Towage business
improved during the quarter, up
3% year-on-year. Robust growth in Australian activity during Q3 was
partly offset by weakness in Scandinavia and the UK. Terminal
Towage activities developed as planned whereas salvage market
activity was very low during the quarter. Svitzer has decided to
divest its Ocean Towage division (1% of Svitzer invested capital), as
a consequence of the very small, ageing fleet which is not part of
core business.
The A.P. Moller - Maersk Group expects a result for 2012 around US$ 3.7bn (US$ 3.4bn in 2011) with an impairment
of US$ 267m in Maersk Tankers recognized in Q3. Cash flow used for capital expenditure is expected to be lower than
2011 (US$ 9.8bn) while cash flow from operating activities is expected to be at the same level as 2011 (US$ 7.3bn).
Maersk Line still expects a modest positive result in 2012 based on higher average rates in the second half of the
year. Global demand for seaborne containers is now expected to increase by 3% in 2012 with declining inbound
European volumes. Maersk Drilling expects the result for 2012 to be lower than 2011 (US$ 488m), mainly due to
delayed start-up on new contracts. Total result from all other activities is still expected to be lower than 2011, excluding
divestment gains and impairments, primarily due to lower expected result in Dansk Supermarked and Maersk Supply
Service. The outlook for 2012 is subject to considerable uncertainty, not least due to developments in the global
economy.
www.marcon.com
62
Royal Boskalis Westminster N.V. has concluded a good third quarter. Revenue
and profit was higher than in the first half of 2012 against stable market conditions.
The order book increased in recent months and stood at a new record high of EUR 4
billion at the end of the third quarter. Based on current insights, the second half of
the year is expected to be strong with a high workload and good results anticipated
on a number of dredging projects in progress and close-out results. Boskalis is now
expecting net profit to amount to around EUR 230-245 million in 2012. Boskalis has recently been approach by a party
from the Middle East, with whom talks are now being held on the possible sale of the 40% stake in Archirodon.
The Dredging segment achieved a good result in the third quarter. Utilization of the hopper
fleet was slightly lower than in the first half whereas utilization of the cutter fleet was at a
comparable level. In the second half of the year Boskalis added large contracts in India and
eastern Africa to the well-filled order book. The order book for Dredging rose incrementally
compared to mid-2012. In Harbor Towage activities volumes grew in the third
quarter at most of the locations where Smit operates. The level of activity at
Salvage, Transport & Heavy Lift was good. Smit Salvage had a relatively quiet
period with a limited number of emergency response assignments. Continued strong demand from the
offshore industry translated into strong fleet utilization at Subsea and Transport. At Heavy Lift demand
in Asia for floating sheerlegs was high. The level of utilization of the European fleet was lower despite a
“Taklift 4” installation project in Brazil. The level of activity at Terminal Services (mainly the 50% stake
in Smit Lamnalco) was in line with expectations. The order book increased as a result of a new
contract in Iraq. Maritime Infrastructure (40% stake in Archirodon) had a good third quarter with a
high level of revenue and good results. The order book rose due to several large new contracts. At the
end of September Smit Lamnalco (50% stake) completed its full refinancing by signing a new US$ 500
million credit facility. The bridging loan provided by Boskalis at the end 2011 was repaid, on balance
resulting in a positive cash effect of around EUR 80 million.
For the remainder of the year the Board of Management expects market developments to be in line
with the first three quarters, barring unforeseen circumstances. Based on current insights, the
second half of the year is expected to be strong with a high workload and good results anticipated on
a number of dredging projects in progress and close-out results. The 2012 full year net profit outlook
has been revised upward to approx. EUR 230-245 million.
Touax Group, owners and operators of river barges, railcars, shipping containers and
modular buildings, reported consolidated revenue for Q3 2012 amounted to €73.2 million
compared with €69.2 million in Q3 2011, i.e. an increase of 5.8%. On an cumulative basis,
consolidated revenue at September 30, 2012 amounted to €260.4 million and increased
18.8% compared with the first three quarters of 2011 (€219.3 million). On a constant
currency basis and excluding changes in the consolidation perimeter, the accumulated consolidated revenue at
September 30, 2012 increased by 12.6%. The increase in revenue in the third quarter of
2012 corresponds to a rise of 3.7% in leasing businesses, and a rise of 14.1% in sales
businesses. In total, the leasing businesses grew by 2.1% in the first three quarters of 2012
and sales businesses grew by 65.4%. Fabrice and Raphaël Walewski, Managing Partners of
Touax, commented: “The growth in revenue of the Touax Group is in line with the forecast
thanks to its international presence, in particular in emerging countries, and the development
of its asset sales and trading businesses alongside leasing”.
The European Maritime Safety Agency has strengthened its network of stand-by oil
spill response vessels by finalizing tenders for the Bay of Biscay, South Atlantic Coast
and Central Mediterranean Sea. In total, EMSA has contracted three bunker tankers,
located in Ferrol, Spain; Sines, Portugal and Malta. The tankers contracted for the
South Atlantic and Central Mediterranean replace previous arrangements following
the expiration of the contractual period. Only the vessel contracted for the Bay of Biscay will add a new response
capacity to an area that has suffered some of the worst spills in Europe. All vessels will be pre-fitted and specially
equipped for oil spill recovery activities and are expected to enter into operational service during the first half of 2013.
EMSA’s Executive Director, Markku Mylly, expressed his pleasure that the Agency is now able to provide oil spill
response for the Bay of Biscay as this was one of the main target areas in previous years.
www.marcon.com
63
Southeast / Southwest Asia, South Pacific and Far East News
Singapore’s CH Offshore Ltd.’s first quarter ended 30 September 2012 (1Q12/13) with
a profit after income tax of US$ 9.18 million, 43.3% higher than the profit after income
tax of US$ 6.405 million for the previous corresponding first quarter ending 30
September 2011. Revenue for 1Q12/13 rose 6% to US$ 13.21 million from US$ 12.468
million (1Q11/12) primarily due to higher utilization. During the previous corresponding
first quarter, one vessel was unable to secure a contract and another off-hire for
upgrading works and major overhaul. Higher revenue contributed by these two vessels
were able to mitigate the loss of revenue from one vessel sold Q3 of the previous financial year.
Jaya Holdings Ltd. of Singapore reported consolidated revenue of US$ 38.7 million and
net profit of US$ 10.1 million for the financial quarter ended 30 September 2012. Jaya’s
total revenue for the quarter was 36% higher than the previous corresponding quarter.
The Offshore Support Services Division recorded revenue of US$ 26.4 million, 65% higher
than the previous corresponding quarter while revenue from Offshore Engineering of US$ 12.3 million was 2% lower
than the previous corresponding quarter. Higher Offshore Support Services revenue was attributable to higher charter
utilization and higher day rates achieved at 84% compared to 68% for the previous corresponding quarter, on the
same fleet size of 28 vessels. Net profit for the Division was at US$ 9.3 million compared to US$ 2.6 million in the
previous corresponding quarter. The increase in net profit in the quarter under review was mainly attributable to
improved charter utilization and higher day charter revenue of 84% versus 68%, and US$ 12,104/d versus US$ 10,742
/day respectively. Offshore Engineering Services Division’s revenue remained flat as the Division sold only one vessel
in each respective quarter. This Division recorded a net profit of US$ 1.2 million in 1st Quarter FY2013 compared to
US$ 2.5 million the previous corresponding quarter. Lower net profit was attributable to lower gross profit margin in 1st
Quarter FY2013. Net profit was US$ 10.1 million, a 113% increase from US$ 4.8 million in the previous corresponding
quarter. Commenting on results, CEO Mr. Venkatraman Sheshashayee said, “We are in a significantly better position
today, compared to a year ago. With the timely shift in our strategic focus to grow our charter fleet and operations,
Jaya has been able to capitalize on the upturn in the sector. We will continue to optimize our fleet to meet the
demands of our customers as we expand our services to new markets in West Africa, the Middle East and Australia.”
Healthy oil prices and continued growth in exploration and production spending will underpin demand for offshore
supply vessels. Hence, outlook for the offshore market remains positive, supported by major oil and gas companies
increasing budgets for exploration and production activity. In addition, the drilling rig fleet, which is a key driver of OSV
demand, is growing. The subsea vessel market also remains strong. Despite high level of activity, day rates remain
low due to supply of new tonnage from the yards and vessels coming off existing contracts. Notwithstanding this,
market values of OSVs have held up well. Although recovery in rates for offshore supply vessels has been slow, the
improving supply-demand balance and increasing preference for newer tonnage will add traction to the recovery in
2013. Jaya Holdings has sales contracts of US$ 95 million for three AHTSs planned for delivery in Q2 FY2013.
Further, Jaya has a strong charter backlog of US$ 196 million. On 7th November, Jaya secured a term loan and
revolving credit facility of up to US$ 150 million from a consortium of financial institutions and banks led by GE Capital
Services Pte. Ltd., United Overseas Bank Limited and Cathay United Bank, Singapore Branch. CEO Mr. Venkatraman
Sheshashayee said, “FY2013 is shaping up to be a good year. Our charter utilization is improving and the strong
charter backlog will provide a strong recurring income base. We are pleased to be able to refinance the existing
Scheme Debt, as this would free the Group from Scheme restrictions, including those on the payment of dividends to
shareholders, and allow the Group flexibility to make new investments as well as seek additional borrowings.”
As part of Miclyn Express Offshore Limited of Singapore’s strategy to rebalance its tug and barge
fleet, Miclyn entered into an agreement with an Australian customer to sell two smaller 250’ barges.
Gain on disposal to be realized in FY2013 is approx. US$ 0.3m. Miclyn also commenced
construction of two 400’ ballastable barges in its Batam shipyard. The barges will be delivered in
first quarter FY2014. For the financial year ended 30 June 2012 (FY12), MEO continued to deliver
strong earnings growth. Revenues increased by 61%, and EBITDA by 26% versus the previous
year. As anticipated, overall fleet utilization continued to trend upwards as a result of strategy
execution and more lively market conditions. Overall utilization was 84% versus 80% the prior year. OSV fleet
utilization dropped off somewhat in FY12 to 82% as a result of preparations for new contracts and repositioning some
vessels. Tug and barge utilization improved substantially versus prior year from 53% to 77% partially due to long term
contract positions (LNG development in North-West Australia) and partially due to arms-length charters from MEO’s
newly established pipe transport business Express Offshore Solutions. Miclyn furthermore enjoyed full benefit of
ownership of their Australian business, Samson Express Offshore, for half a year following completion of acquisition of
the remaining 50%.
www.marcon.com
64
Recent News – Mid-East
In October, Harms Bergung’s Antigua & Barbudan flagged AHT “Centaurus” was lead tug for a rig move of
SinoTharwa Drilling’s jack-up rig “St. Bahari” in the Red Sea. The Egyptian flag
“St. Bahari” was built in 2011 by FG Offshore at Dalian Shipyard in China. After
completing the move, “Centaurus” then steamed to Aqaba to undertake a scrap
tow of the Jordanian 345m x 52m x 28m SBM-fitted VLCC “Rashi” to Gadani,
Pakistan where the 32,401ldt was beached and broken up. The 47.8m x 13.8m
“Centaurus” was built in 2009 by Mutzelfeldt in Cuxhaven, Germany and powered
by a pair of 2,970kW MaK 9M25Cs with controllable pitch props in kort nozzles.
Towing gear consists of a Hatlapa AH1.000 waterfall winch, two 10T tuggers,
Karmoy 300T SWL fork / tow pins and a 250T SWL stern roller.
Smit Lamnalco has been awarded an annual contract by Petrofac to support Single Point Mooring operations 20 km
off the Al Fao Peninsula for the Iraq Crude Oil Export Expansion Project. The annual contract value is approx. US$
70 million (Boskalis share 50%) starting in November. The SPM contract covers operations and maintenance of four
SPM systems. The contract has an initial duration of one year with two annual extension options resulting in a potential
total contract value of US$ 200 million. The agreement involves the full scope of maritime support services for the
crude oil export facilities.
Recent News – Africa
On 27th October, the 30.6m x 10.3m depth, ASD harbor tug “Sinyar” arrived safely at the
port of Maputo, Mozambique after being delivered by TOS. The voyage started at the
port of Jebel Ali, UAE one month previous. P&O Maritime is set to provide
management, pilotage, mooring services, crewing and maintenance for tugs, pilot boats
and mooring boats at the port of Maputo. The LR +100A1 class “Sinyar” will front run
new, state-of-the-art assets currently under construction which in conjunction with
training and development of local staff will drive the port’s efficiency as the Mozambican
economy continues to expand. “TOS is proud to have been awarded the delivery of the
Sinyar by P&O Maritime. We got in contact with our client during the Middle East
Workboats in Abu Dhabi earlier this year. Over the last few years the piracy threat has
influenced the way we prepare and execute ship deliveries extensively. Because of our tailor-made piracy plan for the
vessel and the voyage we were able to win the ship delivery contract.” said Ronald van der Kolk at TOS. “Sinyar” was
built by Dubai Drydocks in 2006 and powered by a pair Wartsila 9L20s developing a total of 4,350BHP and a bollard
pull of 50 tons.
Harms Bergung’s 24,500BHP, 285 ton bollard pull AHT “Uranus” is continuing
work offshore Angola as subcontractor to Interoil Angola. The 74.3 x 18.5 tug
was built in 2009 by Mutzelfeldt Yard in Cuxhaven, Germany and powered by
four 4,500kW MaK 9MC32 diesels with twin 4.5m diameter controllable pitch
props in kort nozzles. The 298 ton bollard pull, 24,500BHP, 74.3m “Orcus” and
219 ton bollard pull, 19,000BHP, 65.0m “Ursus” had their contracts extended
until the end of October by EMAS for the BP PSVM project in Angola. In the beginning of
November, “Uranus” performed anchor handling duties for the semi-submersible drill rig
“Pride South Pacific”, since renamed “Ensco 5001”, as subcontractor with the end client
Maersk Oil. The anchors were pulled from a water depth of over 1,400m. Upon completing
anchor handling duties, “Uranus” was awarded the contract to tow the “Ensco 5001” from
offshore Angola to Cape Town for Ensco. “Uranus” will then mobilize to Singapore for the
next contract.
Seven crew members, 6 Russians and 1 Estonian, abducted during the boarding of
Bourbon Offshore’s 59.8m x 15.0m, 80 ton bollard pull AHTS “Bourbon Liberty 249”
off Bonny Island in Nigerian waters at a Chevron oil platform on 15th October were
released on 1st November. Nine other crew members remained onboard the vessel
which headed for the Port of Onne after the attack and abduction. Despite difficult
conditions while in captivity, they all appear to be in good health.
www.marcon.com
65
Recently Updated Featured Tugs & AHTSs For Sale Direct From Owners (Sorted by HP)
File: SU22247 Supply Boat - AHTS - 222.1' loa x 47.7' beam x 15.7' depth x 19.50'
loaded draft. Built in 1983 by Hyundai Hvy. Ind.; Korea. Foreign flag. GRT: 1,621.
Class: LR + 100A1 Offshore Tug Supply Ice Class 1 + LMC, UMS. Deadweight:
1,900mt. Deck Cargo: 550MT on 36m x 11m clear deck. FO: 937m3. FW: 330m3.
DW: 681m3. Dry Bulk: 290m3 in 4 tanks. Liq. Mud: 1,200BBL. Crane: 1 - 5T @ 9m
outreach. Winch: Brattvaag LP waterfall 3-drum 400MT static holding. Line Pull:
250T. Wire Capacity: 1,000m x 64mm. Stern Roller. Main Engines: 4 x Bergen
KVMB12 total 12,240BHP. Ulstein CP 3,000mm dia prop(s). Kort nozzle(s). 1 800HP stern thruster. Bowthruster 2 - 800HP. Bollard Pull: 120mt. Speed about 12-16kn on 18-30Tpd. Pump(s): Bulk: 2-19.2m3/hr,
Liqmd: 2-60m3/hr, DW: 100m3/hr, FO: 150m3/hr. Genset(s): 2 - 1,570kVA / shaft; 2 - 250kW / CAT; 1 - 94kVA / CAT. Firefighting:
Prepared for future installation FiFi. Quarters: 13 - 1 berth crew cabins. Air Conditioned. Galley. Deep water ice classed anchor
handing tug supply vessel. Ulstein passive stabilization. 30m3 dispersant capacity. 104m3 rig chain lockers & 3” chain lifters.
Hydraulic tow pins. 3 capstans & 2 tuggers. Pennant reels for 900m 76mm and 2 x 500m 76mm wire. Deepwater anchoring system
with 1,500m 38mm wire capacity for anchoring in 400m water. Dispersant spray booms. Although not officially on the market, we
may be able to develop for sale or charter on a private & confidential basis. Southeast Asia. Prompt.
File: SU22248 Supply Boat - AHTS - 222.1' loa x 47.7' beam x 15.7' depth x 19.00' loaded draft.
Built in 1983 by Hyundai Hvy. Ind.; Korea. India flag. GRT: 1,621. Class: IRS & LR +100 A1
Offshore Tug Supply Ice Class 1, +LMC, UMS, LNC, Tug Supply`. Deadweight: 1,710mt. Deck
Cargo: 600mt on 37.3m x 11.0m clear deck. FO: 936m3. FW: 382m3. DW: 800m3. Dry Bulk:
290m3 in 4 tanks. Liq. Mud: 200m3. Calcium Chloride / Brine: 200m3. Crane: 1-2T @ 10m.
Winch: Hydraulic LP waterfall 3-drum. Line Pull: 400T. Wire Capacity: 1,420m 68mm. Stern
Roller. Main Engines: 4 x Bergen total 12,240BHP. Ulstein CP 3,000mm dia prop(s). Kort
nozzle(s). 1 - 800HP stern thruster. Bowthruster 2 - 800HP. Dynamic Positioning. Bollard Pull:
126mt. Speed about 10kn. Pump(s): Liq.Mud 2 x 60m3/h. Bulk 80mt/h. FW 150m3/h, DW 2 x 100m3/h. FO 150m3/h. Brine
150m3/h. Genset(s): 2 - 1,570kW Siemens / shaft, 2 - 305kW / CAT, 1 - 75kW / CAT. Quarters: 21 (1-13, 2-4). Air Conditioned.
Galley. DP1 deep water ice classed anchor handing tug supply vessel. Kongsberg dynamic positioning. Ulstein passive stabilization.
30m3 dispersant capacity. 2-105m3 rig chain lockers. Tow pins, 2-10T tuggers, 3-10T capstans, chain lifters and shark Jaws.
Southeast Asia.
File: SU23047 Supply Boat - AHTS - 230.1' loa x 47.0' beam x 23.9' depth x 20.67' loaded draft. Built in 1976
by Elsflether AG; Germany. Belize flag. GRT: 1,740. Class: GL. Deadweight: 1,540mt. FO: 1,319MT. Main
Engines: 2 x MAK 8M551AK total 11,964BHP. 2 - CP prop(s). Genset(s): 2 - 350kW 50Hz 400vAC. Caribbean.
File: SU21244 Supply Boat - AHTS - 211.7' loa x 45.3' beam x 23.4' depth x 21.32' loaded draft. Built in 1985
by BV J. Pattje, Holland. Foreign flag. GRT: 1,413. Class: DNV + 1A1 Tug Supply Vessel, EO, SF.
Continuous Hull Survey due 11/2014. Deadweight: 1,884mt. Light Disp.: 1,576mt. Deck Cargo: 650MT
on 30m x 11m; 330m2 clear deck. FO: 620m3. FW: 464m3. DW: 537m3. Dry Bulk: 226.5m3 in 4 tanks.
Liq. Mud: 185m3. Calcium Chloride / Brine: 188m3. Crane: 2T with 10m outreach. Winch: Brattvaag
Double drum waterfall. Line Pull: 250T. Wire Capacity: 1,200m x 76mm + work. Stern Roller. Main
Engines: 2 x Wartsila 12V32 total 11,140BHP. 3,500mm CP prop(s). Kort nozzle(s). Ulstein split spade
rudders. Bowthruster 800HP. Bollard Pull: 130MT. Speed about 8/10/12/18kn on 6/10/12/35T. Pump(s):
Dry Bulk: 80TPH; FW: 160m3/h; FO: 150m3/h; Liq. Mud: 50m3/h. Genset(s): 2 - 305kW/Stamford Aux;
2 - 830kW/Stamford shaft 440v6. Quarters: 18 in 8-1, 5-2 berths. Air Conditioned. Galley. UT704 Mk. III design AHTS. Joystick.
DNV approved bollard pull certificate. Ulstein anti-rolling tanks. 2-1,000m & 1-1,400m storage reels. 2 Karm forks 500T. Hydraulic
tow pins with flaps. 198m3 chain lockers. Contact Marcon for price ideas and inspection arrangement. Southeast Asia.
loaded draft. Built in 1982 by C. Amels & Zoon, Holland. Malta flag. GRT: 2,070. Class:
DNV + 1A1 Tug/Supply FiFi II Ice C Oil Rec E0. Special Survey just passed end 2011.
Deadweight: 1,430T. Deck Cargo: 700T on 430m2 clear deck. FO: 536.5m3. FW:
428.4m3. DW: 1,142m3. Dry Bulk: 175m3. Crane: 1 - 2T @ 18m / 1 - 4T @ 2.1m.
Winch: 1 - 350T Brake, 2 - 20T Tugger. Line Pull: 250T. Stern Roller. Main Engines: 4
x Bergen total 10,560BHP. 2 - VP prop(s). Kort nozzle(s). Thrusters: 2 - bow and 1 Stern. Bowthruster 2. Bollard Pull: 101.9T. Speed about 10-15kn. Pump(s): 2 - Fire
Pumps 3,600m3/hr. Firefighting: FiFi II, 4 Monitors 1,800m3/hr, 1 Foam Monitor. Quarters: 14 crew. Galley. Passengers: 27. 4 point
mooring system. Oil dispersant 2 - 6m spray booms. Keen Seller. Mediterranean. Prompt.
www.marcon.com
66
File: SU21158 Supply Boat - AHTS - 211.3' loa x 45.3' beam x 22.7' depth x 15.44' loaded draft. Built in
1983 by Sterkoder Mek; Norway. Vanuatu flag. GRT: 1,398. Class: ABS. Deadweight: 1,100T. Main
Engines: 2 x Nohab SF116VSF total 9,160BHP. 2 - CP prop(s). Bowthruster. Speed about 16kn.
Genset(s): 3 - 60kW 440vAC 60Hz. Southeast Asia.
File: TG84001 Tug - Twin Screw - 149.9' loa x 40.6' beam x 19.7' depth x 15.45' loaded draft.
Built in 1976 by Odense Shipyard; Lindo, Denmark. Rebuilt: 2006. Panama flag. ABS + A1
Towing Svc. + AMS Unrestricted Service. IR SUL, IY. Deadweight: 560T. Deck Cargo: 135T on
69.1'x28.5' clear deck. FO: 559MT. FW: 57MT. BW: 250MT. Winch: Hydraulic Brattvaag double
drum SL120/W BSL; 1 - 3MT tugger. Line Pull: 250T. Wire Capacity: 3,200' x 2.25” (2). Stern
Roller. Main Engines: 2 x MAK 12M453AK total 8,500BHP. 114” Lips CP prop(s). Kort nozzle(s).
11,900nm range. Bowthruster 3.5MT. Bollard Pull: 100MT. Speed about 10-12kn on 31Tpd.
Pump(s): FO: 350gpm, Ballast: 350gpm. Genset(s): 3 - 175kW 380vAC 50Hz. Firefighting: 2 1,300gpm @ 400' monitors. Quarters: 23 person. Triplex shark jaw. 2 - 43m3 chain lockers. Anchor handling tug. Mid East.
File: SU24671 Supply Boat - AHTS - 246.0' loa x 52.5' beam x 24.6' depth x 20.00' loaded draft. Built in 2012 by Chinese yard.
Singapore flag. GRT: 2,759. Class: ABS + A1 (E) OSV AH, Towing Vessel, FiFi 1 + AMS, ACCU + DP-2. Deadweight: 2,500mt.
Deck Cargo: 800MT on 500m2 clear deck. FO: 850m3. FW: 355m3. DW: 1,330m3. Dry Bulk:
226m3 in 4 Tanks. Liq. Mud: 395m3. Crane: 1 - 5T @ 12m. Winch: Elec/hyd double drum
Zicom. Line Pull: 200/250MT. Wire Capacity: 2 - 1,500m 64mm. Stern Roller. Main Engines: 2
x Wartsila 9L26 total 8,300BHP. CP prop(s). Kort nozzle(s). 1- 600kW 10MT tunnel stern
thruster. Bowthruster 2 - 10T. Dynamic Positioning. Bollard Pull: 105MT. Speed about 10-14kn
on 12-19m3/d. Pump(s): FO: 150m3/hr; FW: 150m3/hr; BW / DW: 150m3/hr; Liq Mud: 2 100m3/hr. Genset(s): 2 - 1,500kW / shaft; 2 - 380kW; 1 - 94kW 415vAC 3Ph 50Hz. Firefighting:
2 - 1,500m3/h; 2-1,200m3/h water/foam monitors; Water curtain. Quarters: 40 in 8-1 & 16-2
berths. Air Conditioned. Galley. Kongsberg DP-2 and joystick. Oil dispersant system. Foam /
Detergent 10m3 / 10m3. 2 - 10T Zicom tuggers & 2-5T Zicom capstans. 300T SWL Zicom jaws. 2 elec / hyd Zicom tow pins.
Storage reel for 1,500m 64mm wire. Hospital. Direct from Chinese yard for whom Marcon has sold other newbuildings. Far East.
Prompt.
File: SU27873 Supply Boat - AHTS - 278.2' loa x 72.2' beam x 27.2' depth x 19.69' light draft x 22.31' loaded draft by Southeast
Asian Shipyard. Singapore flag. GRT: 5,166. Class: ABS + A1 + AMS (E) AHT OSV, FiFi 1, DPS-2 HAB(WB), ENVIRO, ORO 1,
ACCU, SPS 2008. Deadweight: 4,800mt. 850m2 clear deck. FO: 1,330m3. FW: 1,000m3. DW: 2,800m3. BW: 2,800m3. Dry Bulk:
280m3 in 4 tanks. Liq. Mud: 838m3. Calcium Chloride / Brine: 838m3. Winch: Brattvaag SL300W 2-drum waterfall, 2- 15MT tuggers,
2-10MT capstans. Line Pull: 300MT. Wire Capacity: 2 - 2,000m x 70mm. Stern Roller. Main Engines: 2 x Wartsila 9L26 total
8,207BHP. 2 - CP prop(s). Kort nozzle(s). 2 - 600kW Wartsila Lips CPP 10MT stern thrusters.
Bowthruster 2 - 800kW. Dynamic Positioning. Bollard Pull: 150MT. Speed about 15.4kn. Pump(s):
Methanol: 2-70m3/h; Liq/Brine/ORO: 2-100m3/h; DW/BW:150m3/h; Chemical: 20m3/h.
Genset(s): 2 - 1,950kW / Wartsila 6L26, 2 - 1,875kW / shaft. Quarters: 78 (6-1,12-2,12-4). Air
Conditioned. Galley. Hybrid propulsion, multi-purpose anchor handling supply vessel designed by
Wartsila Ship Design. SPS-code compliant with Oil Recovery capability, HAB & ENVIRO
notations. Max line pull 300MT ahead using combined diesel mechanical + the 1,950kW
generators and two 1,500kW electric motors. Kongsberg K-pos DP-21 positioning with HIPAP
500. Two 220m3 rig chain lockers. Two 76mm gypsies for rig chain storage. 2 Brattvaag rope storage winches capacity 2,000m
70mm wire. Macgregor 350mt tow pins and 500mt shark jaws. Deck strengthened for AHC crane. Open for outright sale, time
charter or BBC to qualified charterers. Due to high bollard pull, vessel can do a towage to area of operation helping defray cost of
mobilization. Southeast Asia. Q2 2013.
File: SU21120 Supply Boat - AHTS - 211.2' loa x 45.2' beam x 22.6' depth x 19.10' loaded draft. Built in 1982 by Aker Vindholmen;
Norway. Vanuatu flag. GRT: 1,316. Class: ABS. Deadweight: 1,898T. Deck Cargo:
750MT on 124.64'x36.08' clear deck. FO: 681m3. FW: 250m3. DW: 813m3. Dry Bulk: 4 x
42.5m3. Liq. Mud: 298m3. Crane: 1 - 2.5T x 7m Hydraulic. Winch: Hydraulic Brattvaag.
Line Pull: 250MT. Wire Capacity: 1-1200m x 64mm; 1-1000m x 64mm. Stern Roller. Main
Engines: 2 x Normo KVMB18 total 8,160BHP. 2 - CP prop(s). Kort nozzle(s).
Bowthruster. Bollard Pull: 100MT. Speed about 12-16kn on 12-25MT/d. Pump(s): FO,FW
& Liqmd: 100m3/hr, DW: 160m3/hr. Genset(s): 2 - 265kW 305kVA 415v 60Hz.
Firefighting: 2 - 4,500Lpm. Quarters: 13. Passengers: 12. UT-704 design. Karm fork
shark jaws & tow pins. Southeast Asia.
File: SU21125 / SU21140 Supply Boats - AHTS (2 total) - 211.3' loa x 45.3' beam x 22.6' depth x 15.42' loaded draft. Built in 1981
by Sterkoder Mek.; Norway. Belize flag. GRT: 1,334. Class: ABS. Deadweight: 1,050T. Deck Cargo: 750T on 126' x 36' clear deck.
FO: 835m3. FW: 437m3. DW: 437m3. Dry Bulk: 170m3 in 4 tanks. Liq. Mud: 93m3. Calcium Chloride / Brine: 366m3. Crane: Elect.
Hydraulic. Winch: Hydraulic Brattvaag double drum waterfall. Line Pull: 250T. Stern Roller. Main Engines: 2 x Nohab F316V total
8,160BHP. Ulstein CP prop(s). Kort nozzle(s). Bowthruster 800HP. Bollard Pull: 100MT. Speed about 10-16.3kn on 12-26Tpd.
Genset(s): 4 - 2,376kVA 440vAC. 119m3 rig chain locker. Standby rescue capability. Ulstein shark jaw. Southeast Asia.
www.marcon.com
67
File: SU21157 Supply Boat - AHTS - 211.3' loa x 45.3' beam x 22.7' depth x 15.42' loaded draft. Built in 1982 by Sterkoder Mek;
Kristiansund, Norway. Vanuatu flag. GRT: 1,398. Class: ABS. Deadweight: 1,059T. Main Engines: 2 x Nohab F316V total
8,160BHP. Bowthruster. Speed about 16kn. Genset(s): 2 - 180kW 440vAC 60Hz. Caribbean.
Built in 1983 by Tangen Verft; Norway. Belize flag. GRT: 1,323. Class: ABS. Deadweight: 1,050T.
Deck Cargo: 740LT on 124.8' x 36' clear deck. FO: 830m3. FW: 250m3. DW: 650m3. Dry Bulk:
6,000ft3 in 4 tanks. Liq. Mud: 117m3. Derrick/A-Frame: 1-Hydraulic. Winch: Hydralik Brattvaag
waterfall SL250Wear. Line Pull: 250T. Wire Capacity: 1,400m x 64mm. Main Engines: 2 x Polar
Nohab total 8,160BHP. Bowthruster 9.7T. Bollard Pull: 110MT. Speed about 16.9kn on 28Tpd.
Genset(s): 2 - 305kVA; 2 - 800kVA. Quarters: 13 cabins. Passengers: 12. Southeast Asia.
File: SU19507 Supply Boat - AHTS - 195.0' loa x 50.0' beam x 21.0' depth x 17.60' loaded draft. Built in 1982 by Gul Engineering
Pte Ltd.; Singapore. Belize flag. GRT: 1,963. Class: ABS + A1 AMS. Unrestricted Service. SOLAS fully compliant. Deadweight:
1,440mt. Deck Cargo: 750T on 360m2 clear deck. FO: 627m3. FW: 277m3. DW: 885m3. Dry Bulk:
266m3. Liq. Mud: 250m3. Crane: 1-2T @ 20m/min jet 7.4m. Winch: Hydraulic double drum + 2
tuggers & 2 capstans. Line Pull: 150MT. Wire Capacity: 900m 62mm + spare. Stern Roller. Main
Engines: 4 x Wichmann 5AXA total 8,000BHP. CP prop(s). 1-300HP stern thruster. Bowthruster 2500HP. Bollard Pull: 80MT. Speed about 10-12kn on 11-18Tpd. Pump(s): DW: 150m3/h; FW:
100m3/h; FO: 150m3/h; Dry bulk: 60m3/h; Brine: 60m3/h. Genset(s): 2 - 940kVA / shaft, 1 - 376kVA
/ main + emergency. Firefighting: 1 - 1,200m3/hr pump & 2 monitors. Quarters: 14 in 10 cabins. Air
Conditioned. Galley. Passengers: 12 in 2 cabins. 300MT Karmfork chain stoppers. Hydraulic tow
pins. Hatlapa storage reels for 1,000m wire. 2 chain lockers max 1,200m chain. Southeast Asia. Prompt.
1973 by H.H. Bodewes; Millingen a/d Rijn. Rebuilt: 2007. Malaysia flag. GRT: 1,294. Class: BV I Tug,
Unrestricted. Deadweight: 785mt. Deck Cargo: 500T on 302m2 clear deck. FO: 679.9m3. FW: 110m3.
DW: 595m3. Dry Bulk: 186m3 in 5 tanks. Winch: Giessen 3-drum. Wire Capacity: 1,000m x 61mm / 760m
x 58mm. Stern Roller. Main Engines: 2 x Stork Werkspoor 6TM410 total 8,000BHP. Lips 4-blade 2.9m
CP prop(s). Kort nozzle(s). Modified to burn HVFO. 4SA 6cyl 410 x 470mm. Bowthruster 365BHP.
Bollard Pull: 95T. Speed about 12-15.7kn on 12-30Tpd. Genset(s): 4 - 170kVA / Stork 440vAC 60Hz.
Quarters: 10 crew in 9 cabins. Air Conditioned. Galley. Passengers: 18 in 4 cabins. AHTS. 785mtdwt /
1,128mtdwt on 4.50m / 5.06m draft. 4 rig chain lockers for 2,438m 3” chain. Equipped with water cooled disc brake for deepwater
anchor handling. 2 storage reels. Employment or sale. Southeast Asia. Prompt.
1982 by Husumer Kroeger, Germany. Vanuatu flag. GRT: 1,334. Class: Ex DNV & GL. ABS (currently
withdrawn). Deadweight: 1,887mt. Deck Cargo: 675T on 124'x36' clear deck. FO: 794T. DW: 255T. BW:
577.5T. Dry Bulk: 170m3. Liq. Mud: 343m3. Winch: Karmoy Double drum. Line Pull: 551,000lbs. Wire
Capacity: 9,180' x 2.5”. Stern Roller. Main Engines: 2 x MAK 9M453AK total 8,000BHP. 2 - CP prop(s).
Kort nozzle(s). Bowthruster 670BHP. Bollard Pull: 100T. Speed about 11-15kn on 155gph @11kn.
Genset(s): 2 - 664kW 220/440v; 2 - 244kW. Firefighting: Fitted. Quarters: 9-1, 2-2, 1-7. Air Conditioned.
Galley. For sale only out of competition and strictly “as is, where is”. Africa West Coast.
File: TG80151 Tug - Twin Screw - 150.9' loa x 42.6' beam x 21.2' depth x
18.00' loaded draft. Built in 1978 by Mitsui SB, Eng. & SB; Japan. Canada flag.
ABS + A1 E + AMS. Deadweight: 869T. Deck Cargo: 307T on 12m x 7m clear
deck. FO: 866.9m3. FW: 237.3m3. Crane: 1 - 10T El/hydraulic. Winch: Double
drum Fukushima. Main Engines: 2 x Pielstick 8PC2-2L400 total 8,000BHP. 2 VP prop(s). Kort nozzle(s). 2 Oil 4SA 16cyl 225x460mm. Machinery under
continuous certificate. Bowthruster 340BHP. Bollard Pull: 92T. Speed about
10-12kn. Genset(s): 2 - 270kW / Nishiba 440/110v 60Hz; 1 - 80kW. Quarters: 12 men. Air Conditioned. Passengers: 8. Articulated
tug with 21,000DWT self-discharge bulk barge HB59472. Converted from MDO to IFO in 2007. Quarters updated & galley
refurbished. Sold through Marcon to present Owners. Exclusively for sale through Marcon. Canada Great Lakes.
File: TG80214 Tug - Twin Screw - 237.5' loa x 42.6' beam x 19.7' depth x 17.70' loaded draft. Built in
1977 by Miyoshi Zosen; Uwajima, Japan. Panama flag. GRT: 1,819. Class: ABS + A1 Towing + AMS,
Unrestricted Service. 4th Annual Survey completed beginning April 2012. Deadweight: 1,825T. FO:
1,380T. FW: 230T. BW: 192T. Winch: Double Drum 340T brake. Line Pull: 80T@5m/min. Wire
Capacity: 2 - 1200m x 64mm. Main Engines: 2 x Niigata 8M640X total 8,000BHP. Fixed Pitch nozzle
rudder prop(s). Kort nozzle(s). Oil 4st, 8 cyl 400x520mm capable of burning HVFO. Endurance: 80
days. Bowthruster 470BHP. Bollard Pull: 82T. Speed abt.12-14kn on 16-24Tpd. Genset(s): 2 - 280kW
/ Yanmar 470HP 445/110v 60Hz. Quarters: 18 total. Main towing wire renewed end 2011. Mid East.
www.marcon.com
68
File: SU21844 Supply Boat - AHTS - 218.0' loa x 43.0' beam x 19.0' depth x 16.74' loaded draft. Built in 1974 by Smedvik;
Tjorvaag, Norway. Vanuatu flag. GRT: 1,105. Deadweight: 965T. FO: 757m3. Main Engines: 4 x EMD 16-645E7B total 7,800BHP.
Speed about 16kn free. Genset(s): 2 - 250kW. Anchor handling fire-fighting AHTS. Caribbean.
File: TG74146 / TG74147 Tugs - Twin Screw (2 total) - 146.0' loa x 40.0' beam x 20.5' depth
x 12.30' light draft x 18.00' loaded draft. Built in 1976 by D.M. Kremer Sohn; Germany.
Azerbaijan / Belize flag respectively. GRT: 823. Class: ABS + A1 + AMS (exp. 30 Nov 2010 /
Apr 2009). Deadweight: 753lt. Deck Cargo: 170T on 50' x 18' clear deck. FO: 167,462g. DW:
13,713g. Winch: Surken Bodewes double drum + 10T tugger. Line Pull: 440,000lbs. Wire
Capacity: 5640' x 2.5”. Stern Roller. Main Engines: 2 x B&W 14U28L4 total 7,420BHP. 2 - CP
prop(s). Kort nozzle(s). Alpha. Bowthruster 450BHP. Bollard Pull: 100MT. Speed about 14kn.
Genset(s): 3 - 220kW / GM12V-71; 1 - 80kW / GM4-71 400vAC 60Hz. Quarters: 16 crew (4-1,
4-2, 1-4). Air Conditioned. Galley. Passengers: 4. Anchor handling tug. Shark jaw, open stern.
Sale “as is, where is”. Encouraging clean, cash offers after inspection. Mid East.
File: SU24668 Supply Boat - AHTS - 246.0' loa x 52.5' beam x 24.6' depth x 20.00' loaded draft. Built in 2011 by Chinese yard.
Singapore flag. GRT: 2,759. ABS + A1 (E) OSV AH, Towing, FiFi 1 + AMS, ACCU + DP-2. Deadweight: 2,500mt. Deck Cargo:
800MT on 500m2 deck. FO: 850m3. FW: 355m3. DW: 1,330m3. Dry Bulk: 226m3 in 4 Tanks. Liq. Mud: 395m3. Crane: 1 - 5T @
12m. Winch: Elec/hyd double drum Zicom. Line Pull: 200/250MT. Wire Capacity: 2 - 1,500m
64mm. Stern Roller. Main Engines: 2 x Wartsila 8L26 total 7,295BHP. CP prop(s). Kort
nozzle(s). 1- 600kW 10MT tunnel stern thruster. Bowthruster 2 - 10T. Dynamic Positioning.
Bollard Pull: 99.64MT. Speed about 10-14kn on 12-19m3/d. Pump(s): FO: 150m3/hr; FW:
150m3/hr; BW / DW: 150m3/hr; Liq.mud: 2 - 100m3/hr. Genset(s): 2 - 1,500kW / shaft; 2 380kW; 1 - 94kW 415vAC 3Ph 50Hz. Firefighting: 2 - 1,500m3/h; 2-1,200m3/h water/foam
monitors; Water curtain. Quarters: 40 in 8-1 & 16-2 berths. Air Conditioned. Galley. Kongsberg
DP-2 and joystick. Oil dispersant system. Foam / Detergent 10m3 / 10m3. 2 - 10T Zicom
tuggers & 2-5T Zicom capstans. 300T SWL Zicom jaws. 2 elec / hyd Zicom tow pins. Storage reel for 1,500m 64mm wire. Hospital.
Sewage treatment plant. Direct from Chinese shipyard for whom Marcon has sold other newbuildings. Far East. Prompt.
File: SU21138 Supply Boat - AHTS - 211.0' loa x 45.0' beam x 22.0' depth. Built in 1982. Vanuatu flag. Deadweight: 1,856T. Light
Disp.: 745T. 124' x 36' clear deck. Liq. Mud: 1,453BBL. Main Engines: 2 x MAK 9M453 total 7,240BHP. Firefighting: Fitted.
Quarters: 15. For sale only “as is, where is” outside of competition. Africa West Coast.
File: SU21744 Supply Boat - AHTS - 217.8' loa x 44.6' beam x 17.1' depth x
14.60' loaded draft. Built in 1982 by Southern Ocean Shipbldg; Singapore.
Vanuatu flag. GRT: 1,263. Class: ABS + A1 (E) + AMS. Deadweight: 1,386T. Light
Disp.: 1,264T. 123' x 32' clear deck. Main Engines: 2 x Yanmar 12ZL-ST total
7,200BHP. 2 - FP prop(s). Bowthruster. Speed about 15kn. Genset(s): 2 - 210kW
AC, 1 - 99kW AC. Quarters: 40 berths. Laid up. Southeast Asia.
File: TG72113 / TG72114 Tugs - Azimuthing (2 each) - 111.5' loa x 44.3' beam x 20.0' depth. Built in
2011 by Turkey. Foreign flag. GRT: 685. Class: RINA C + Hull + Mach, Unrestricted Navigation, AutUms, Escort Tug, FiFi 1. FO: 220m3. FW: 20m3. BW: 80m3. Crane: Knuckle Boom 31.5MT. Winch:
Ridderinkhof TW-H-450 (aft);1 - 65T tow hook. Line Pull: 200T brake. Wire Capacity: 200m x 88mm.
Stern Roller. Main Engines: 2 x ABC 12MVDZ total 7,200BHP. 2 - Schottel SRP 2020 CP prop(s).
Range: 3,000nm. Bowthruster Schottel 268BHP. Bollard Pull: 80T. Speed about 13.5kn. Genset(s): 2 240kW; 1 - 80kW. Firefighting: FiFi-1; Water/Foam monitor 1,200m3/hr; Water/Foam 300m3/hr.
Quarters: 12. Robert Allen RAstar 3400 design. Towing Pins: SWL 80T. Mediterranean.
File: TG66148 Tug - Twin Screw - 147.9' loa x 42.6' beam x 15.74' loaded draft. Built in 1992 by
Southern Ocean, S'pore. Vanuatu flag. GRT: 920. Class: ABS (formerly LR.). Deadweight: 631mt.
Light Disp.: 879mt. Deck Cargo: 300MT on 18.5m x 10m clear deck. FO: 440m3. FW: 220m3. BW:
100m3. Winch: Double drum hydraulic Brattvaag. Line Pull: 160T SWL. Stern Roller. Main Engines:
2 x Stork Werkspoor 8SW280 total 6,600BHP. CP prop(s). Independent Ulstein Rudders.
Bowthruster 335BHP. Dynamic Positioning. Bollard Pull: 75.54T. Speed about 12-14kn on 1517Tpd. Pump(s): FW: 100m3@60m, BW: 50m3/H: FO: 6m3/h. Genset(s): 3 - 250kW 415vAC 50Hz
+ 1-50kVA. Firefighting: FiFi 1,500m3/hr. Quarters: 15 in 9 cabins. Air Conditioned. Galley.
Passengers: 2 double cabins. Push bow. Shark jaw. Tow pins. Full anchor handling and tow gear.
Vessel has design provisions for lengthening to 213' LOA. Enclosed winch house. Mid East.
www.marcon.com
69
File: SU18404 Supply Boat - AHTS - 184.0' loa x 45.0' beam x 16.5' depth x 14.00' loaded draft. Built
in 1973 by Bel Aire Shipyard. Mexico flag. GRT: 950. ABS + A1 Towing, AMS Annual Hull, Machinery
& Special Survey due 17 May 2011. Originally Ice Class 1A. Deadweight: 1,268T. Deck Cargo: 500LT
on 75' x 38' deck. FO: 125,004g. FW: 43,581g. DW: 84,750g. Dry Bulk: 113m3. Crane: 3MT. Stern
Roller. Main Engines: 4 x EMD 16-567BC total 6,560BHP. Last Overhauled: Oct 1995. Anker 2642mm
CP prop(s) on 11.5” shaft(s). Kort nozzle(s). No. 2 main engine is an EMD 16-645E6. Bowthruster
300HP. Bollard Pull: 70MT. Speed about 12kn on 12Tpd. Pump(s): FO: 108m3/h; DW: 108m3/h; FW:
27m3/h. Genset(s): 2 - 320kW / CAT 3406, 1 - 60kW. Firefighting: 1 - Fire monitor. Quarters: 2-4, 5-2,
4-3 berth. Air Conditioned. Galley. Open stern anchor handling vessel. Double bottom; wide hull. Last worked 2010 offshore job with
CalDive in Bahamas. Now tied up with ABS surveys overdue as of May 18, 2011. Winch removed 2011. U.S. Gulf Coast.
File: TG62135 Tug - Twin Screw - 149.0' loa x 40.0' beam x 22.2' depth x 18.00' loaded
draft. Built in 1976 by Halter Marine. U.S. flag. GRT: 198. ABS Loadline. FO: 240,000g.
FW: 14,975g. Winch: Intercon double drum. Line Pull: 350,000lbs. Wire Capacity: 4,000' x
2.25”. Main Engines: 2 x Alco 16-251F total 6,200BHP. 2 - FP - 4 blade 144” x 105”
prop(s). Bowthruster. Bollard Pull: 70T. Speed about 13kn. Genset(s): 2 - 150kW.
Quarters: 15 in 8 cabins. Air Conditioned. Raised foc'stle bow. Open wheel. Remote
operated tow pins. Bollard pull abt. 77T (certified 1990). Sold to owner thru Marcon.
Current owners spent money on refurbishments after purchase in 2007. U.S. Northeast.
File: SU20538 Supply Boat - AHTS - 205.0' loa x 42.1' beam x 16.5' depth x 14.10' loaded draft. Built in 1983 by McDermott
Shipyard Inc.; LA. Vanuatu flag. GRT: 1,012. Class: ABS + A1, Towing Service (E) + AMS, Unrestricted Service. Deadweight:
1,260T. Light Disp.: 1,100T. 102' x 30' clear deck. Liq. Mud: 1,083BBL. Main Engines: 2 x EMD 16-645-E7B total 6,140BHP. 2 - FP
prop(s). Bowthruster. Speed about 12kn. Genset(s): 2 - 150kW AC. Quarters: 20 berths. Laid up. U.S. Gulf Coast.
File: SU19901 Supply Boat - AHTS - 199.6' loa x 42.6' beam x 20.3' depth x 16.56' loaded draft. Built in 1983 by Hudong;
Shanghai, China. Belize flag. GRT: 1,252. Class: ABS SS due Feb 09. Deadweight:
1,171T. Deck Cargo: 600T on 98.4' x 33.5' clear deck. FO: 451T. FW: 234T. DW: 525T.
Dry Bulk: 6,000ft3 in 4 tanks. Derrick/A-Frame: 250T. Winch: Norwinch double drum.
Line Pull: 180T. Wire Capacity: 2 - 1,100m x 57mm. Stern Roller. Main Engines: 4 x
MAN 12V20/27 total 6,000BHP. 2 - B&W CP 4-blade 108” dia. prop(s). Kort nozzle(s).
Each engine independently declutchable. Bowthruster 6.5T. Bollard Pull: 78MT. Speed
about 10.8-14kn on 10.2Tpd. Pump(s): FO, DW & FW: 100m3/h. Genset(s): 2 - 245kW /
MAN; 2 - 268kW / shaft 440vAC. Firefighting: 2 - 1,200gpm fire monitors. Quarters: 16
officers/crew. Air Conditioned. Galley. Passengers: 12 berths. 11 ballast tanks. 60m3 chain lockers. Vessel can operate on one or
two shafts producing 1,500, 3,000, 4,500 or 6,000BHP. Southeast Asia.
light draft x 16.40' loaded draft. Built in 1975 by Yokohama Shipyard; Japan. Rebuilt:
2002. Foreign flag. GRT: 1,163. Class: ABS + A1 (E) Towing Service + AMS.
Unrestricted. Deadweight: 1,262mt. Deck Cargo: 500mt on 30m x 10m clear deck. FO:
520mt. FW: 247mt. DW: 390T. Dry Bulk: 170m3 in 4 tanks. Crane: Hydraulic 2,500kg.
Winch: Fukushima double drum waterfall; 2 - 5T tuggers; 2 - 3T capstans. Line Pull:
150T. Wire Capacity: 800m 64mm / 100m 38mm. Stern Roller. Main Engines: 2 x
Niigata 12MGV28BX total 6,000BHP. Bowthruster 287BHP. Bollard Pull: 63.5mt.
Speed about 7-14kn max on 735-882Lph. Pump(s): FW: 100m3/h, DW: 100m3/h, FO: 60m3/h, Bulk: 550m3/h. Genset(s): 3 205kW / CAT 3306 440vAC 60Hz. Firefighting: 100m3/h head main, 200m3/h diesel. 1 - water monitor. Quarters: 30 in 4-1, 9-2, 2-4
cabins. 150T Shark jaws & 100T Tow pins. 800m spare tow wire. 3.1kW Yanmar salvage pump. Mid East.
File: SU19401 / SU19407 Supply Boats - AHTS (2 each) - 194.2' loa x 40.2' beam x 17.4' depth x
13.60' loaded draft. Built in 1978 by Carrington Shipways; Australia. Indonesia flag. GRT: 1,019.
Class: ABS A1(E), AMS, ACCU. Deadweight: 956T. Deck Cargo: 550MT on 95.5' x 31.16' clear
deck. FO: 568m3. FW: 173m3. DW: 326m3. Dry Bulk: 4 tanks in 42.5m3. Winch: Double drum
waterfall SMATCO. Line Pull: 175MT. Wire Capacity: 2 - 1,200m with 58mm wire. Stern Roller.
Main Engines: 2 x EMD 16-645E7A total 5,750BHP. 2 - CP prop(s). Kort nozzle(s). Bowthruster.
Bollard Pull: 81MT. Speed about 11.5-14kn on 10-15MT/d. Genset(s): 2 - 200kW, 1 - 140kW.
Firefighting: 2 - 5,500Lpm. 300MT Shark jaw with two pins. 3m dia moonpool Southeast Asia.
File: SU20702 Supply Boat - AHTS - 207.0' x 40.0' beam x 17.0' depth x 16.70' loaded draft. Built 1976 by Campbell Industries;
San Diego, CA. Vanuatu flag. ABS +A-1, E, Ice “C”. Deadweight: 938T. 118' x 32' clear deck. FO: 115,800g. FW: 41,100g. DW:
182,700g. Dry Bulk: 6,000ft3. Winch: Smatco 72 DAW-250 W/F Line Pull: 300,000lb. Wire Capacity: 3000” 2.125”. Stern Roller.
Main Engines: 2 x EMD 16-645E5 total 5,750BHP. 132”x112” 4 blade fixed prop(s). Kort nozzle(s). 133” dia. korts. Bowthruster
400HP. Bollard Pull: 90ST. Speed about 13-15kn on 125-248gph. Genset(s): 2 - 220kW / GM12V71. Firefighting: Fixed CO2
system. Quarters: 27 in 8 cabins. 2 capstans. Retractable tow pins. Flume tank stabilization. Africa West Coast.
www.marcon.com
70
File: SU22641 Supply Boat - AHTS - 226.0' loa x 40.0' beam x 17.0' depth x 8.20' light draft x 14.20' loaded draft. Built in 1976 by
Halter Marine; Lockport, LA. U.S. flag. GRT: 298. Class: ABS + A1, E, (expired Jan 2011). Deadweight: 1,213lt. Deck Cargo: 800LT
on 140' x 31' clear deck. FO: 86,000g. FW: 16,000g. DW: 186,100g. Dry Bulk: 8,000ft3. Crane. Winch: Double drum SMATCO DAW
250. Line Pull: 300,000lb. Wire Capacity: 2,500' x 2.25”. Main Engines: 2 x EMD 16-645E7 total 5,750BHP. 120” x 90” prop(s). Full
tow 5,200gpd / 85% @ 4,800gpd / 80% @ 4,000gpd. Bowthruster. Dynamic Positioning. Bollard Pull: 59LT. Speed about 14knots.
Genset(s): 2 - 150kW AC. Firefighting: Y. Quarters: 19 berths in 8 cabins. Air Conditioned. Galley. Stretched hull in 1997. Laid up.
Joy-stick controls, DP1. Walk in Fridge/Freezer. U.S. Gulf Coast.
File: TG48001 Tug - Twin Screw - 127.6' loa x 32.1' beam x 10.9' depth x 12.50' light draft x
15.50' loaded draft. Built in 1967 by Burton Shipyard, Port Arthur, TX. U.S. flag. GRT: 178.
Class: Unclassed. ABS Loadline allowed to lapse. FO: 78,000g. FW: 7,600g. Winch: Double
drum Almon Johnson. Wire Capacity: 2,100' x 2”. Main Engines: 2 x EMD 16-645E5 total
5,750BHP. Last Overhauled: Required. 115” x 81” prop(s). Repowered 1999 from Fairbanks.
Bollard Pull: 77T. Speed about 12kn. Genset(s): 2 - 75kW. Quarters: 14. In operating
condition. Tired engines. Ballast tanks need steel work. Try best offers. U.S. Northeast.
File: TG57142 Tug - Twin Screw - 126.0' loa x 36.0' beam x 18.6' depth x 16.18' loaded draft. Built in 1978
by Main Iron Works, LA. Foreign flag. GRT: 528. Class: ABS + A1 + AMS, Towing Services. FO: 112,000g.
FW: 24,000g. Winch: Smatco 66DAW double drum waterfall; 150T brake. Line Pull: 110T. Wire Capacity:
2,952'. Stern Roller. Main Engines: 2 x EMD 16-645E7 total 5,750BHP. FP prop(s). Kort nozzle(s).
Bowthruster. Speed about 12kn free. Pump(s): FiFi; 5,000gpm / GM16V71. Genset(s): 3 - 95kW / GM8V71
230/115vAC 60Hz. Firefighting: 1 - water / foam monitor. Foam - 3,408g. Quarters: 16. Air Conditioned.
Galley. 100MT capacity stern roller. 2 - 5T berthing winches forward. Tug fitted with two flanking rudders
forward of each propeller. Dispersant - 2,090g. Reportedly in very good condition. Current with ABS with full
crew aboard ready to work. 200T Shark jaws and tow pins. Mid East.
File: TG59117 Tugs - Single Screw (2 total) - 128.0' loa x 36.1' beam x 15.7' depth. Built in 1981 by
McDermott Shipyard; Amelia, LA. U.S. flag. GRT: 272. ABS + A1, Towing Service + AMS + ABCU.
Deadweight: 412T. Light Disp.: 720lt. FO: 83,600g. FW: 8,929g. Winch: Markey TDS 32 enclosed.
Wire Capacity: 2,000' 2”. Main Engines: 2 x EMD 16-645E7B total 5,750BHP. Single 12.5' dia VP
steering prop in Kort nozzle. Automated engine room ABCU. Speed about 10.5kn on 7,000gpd.
Genset(s): 2 - 210kW; 1 - 55kW. Firefighting: 1 - 1,000gpm fire monitor. Quarters: 12 persons. Two
ATB tugs. See also TG57128. Intercon linkage system installed 1997. Previously matched with
180,000BBL barge. Tug partial double hull. Upper pilothouse 51.35” height of eye. Twin engine/single
screw. Marcon sold to both present & past owners. Keen seller inviting offers. U.S. Gulf Coast.
by Main Iron Works; Houma, LA. U.S. flag. GRT: 176. Class: ABS + A1 Towing Service + AMS. Unrestricted
Service. Annual Hull & Machinery Surveys overdue 31 Dec 2011. Winch: Single drum. Main Engines: 2 x
EMD 16-645E7 total 5,750BHP. Cast steel FP prop(s) on Stainless shaft(s). Genset(s): 2 - 98kW. Oceangoing push tug with raised foc'stle bow and elevated pilot house. 64' highest fixed point. Laid-up in class.
Drydocking and tail shaft surveys due January 2013. U.S. Gulf Coast.
File: TG39134 Tug - Twin Screw - 107.0' loa x 26.7' beam x 14.8' depth x 12.65' draft. Built 1953 by
Higgins Industries; New Orleans, LA. Rebuilt: 1981. U.S. flag. GRT: 124. Unclassed. No Loadline.
FO: 35,000g. Winch: Single drum aft + bow. Wire Capacity: 2,200' 2” new 2007. Main Engines: 2 x
EMD 16-645 total 5,700BHP. Last Overhauled: 2006. Turbocharged. Repowered from
GM16V149TIs in 2006 @ 27.5T astern BP. Bollard Pull: 42.5T. Speed about 12kn. Genset(s): 2 75kW AC. Open for sale or try long-term bareboat to qualified charterers. U.S. East Coast.
File: SU20400 Supply Boat - AHTS - 204.0' loa x 40.0' beam x 16.5' depth x 8.00' light draft x 14.00' loaded draft. Built in 1974 by
Bellinger SY; Jacksonville, FL. Panama flag. GRT: 295. Class: BV- due June 2012. Deadweight:
934mt. Deck Cargo: 530T on 315m2 clear deck. FO: 378m3. FW: 340m3. DW: 4,550BBL. Dry
Bulk: 3,680ft3 in 4 tanks. Winch: Smatco double drum 72DAW 250 waterfall. Line Pull:
350,000lb. Wire Capacity: 3,500' x 2.25”. Stern Roller. Main Engines: 2 x Alco 12-251F total
5,600BHP. 108” x 92” 4 blade stainless prop(s). Kort nozzle(s). Bowthruster 450HP. Bollard Pull:
52.5MT. Speed about 9/11knots on 70-120-220gph. Pump(s): DW: 610gpm; FO: 610gpm; Bulk:
175gpm; FW: 610gpm @ 150'. Genset(s): 2 - 200kW / KATO 208/440vAC 60Hz; 1 - 94kW / GM
4-71 380v 50Hz. Firefighting: 1,200m3/h fire pump & 2 monitors. Quarters: 22 in 8 cabins. Air
Conditioned. Galley. Range 9150nm @ 11kn. 1 - 5T & 1 - 7T tuggers. Safety equipment in accordance with SOLAS. Dispersant
system. North Sea stacks. Working spot market, but open for sale “as is, where is”. Southwest Asia.
www.marcon.com
71
File: TG56147 Tug - Twin Screw - 148.0' loa x 35.1' beam x 19.3' depth x 17.56' loaded draft. Built in 1976 by
Southern Ship Bldg.; Slidell, LA. U.S. flag. GRT: 180. Class: ABS + A1 Towing Service. AMS, Unrestricted.
Drydocking overdue 8/2009. Special Periodic Hull Survey due 11/2011. Light Disp.: 727lt. FO: 122,000g. Main
Engines: 2 x EMD 16-645-E5 total 5,600BHP. Cast steel FP prop(s). Engine started abt. every 30 days. Speed
about 9 - 12kn. Genset(s): 2 - 165kW. Push tug with upper pilothouse with conventional wire connection
system. Height of eye 55.5'. Highest fixed point 92.83'. 75.27' light air draft. ITC tonnage GT/NT 606 / 181. In
lay-up status. Copy of ABS report & ultrasonics available on request. U.S. Gulf Coast.
File: TG54103 Tug - Azimuthing - 105.0' loa x 38.0' beam x 17.6' depth. Built in 2012 by
Turkey. Foreign flag. GRT: 500. Class: RINA C + Hull + Mach, Unrestricted Navigation, AutUms, Escort Tug, FiFi 1. Deadweight: 1,025. Crane: Knuckle Boom 14MT. Winch: Hyd
single drum; 65T tow hook. Wire Capacity: 1,000m x 52mm. Stern Roller. Main Engines: 2 x
Wartsila 6L26 total 5,467BHP. 2 - LIPS type HR nozzle prop(s). Range: 3,000nm.
Bowthruster. Bollard Pull: 70T. Speed about 13kn. Pump(s): Fire pumps. Genset(s): 2 175kW /Scania; 1 - 60kW. Firefighting: Water/Foam monitor 1200m3/hr, water/foam
300m3/hr. Quarters: 10 persons. Air Conditioned. Galley. Ramparts 3200 design escort tug.
Bollard pull: 70T ahead; 66T astern @ 100% MCR 5,467BHP. Towing pins. Mediterranean.
File: SU19276 Supply Boat - AHTS - 192.2' loa x 44.6' beam x 22.2' depth x 19.47' loaded draft. Built in 1985 by Robin Shipyard
Pte Ltd, Singapore. India flag. GRT: 1,310. Class: IRS + SUL + IY, Tug/Supply Vessel, STS DP1. Formerly DNV. Deadweight:
1,819mt. Light Disp.: 1,233mt. FO: 622kL. FW: 209MT. DW: 612MT. Dry Bulk: 150MT. Line Pull: 150MT. Wire Capacity: 1,000m x
56mm. Main Engines: 4 x Daihatsu 6DSM-26A total 5,400BHP. 2 - CP prop(s). Bowthruster 368kW. Dynamic Positioning. Bollard
Pull: 63-74T. Speed about 12kn max on 8kL/day. Genset(s): 2 - 680kW; 2 - 245kW / Cummins-KT-1150G 380vAC 50Hz. Quarters:
18 crew. UT 714 design. DP-1. Southwest Asia.
File: TG53098 / TG53097 Tugs - Azimuthing (2 each) - 106.6' loa x 38.3' beam x 18.4'
depth x 14.10' loaded draft. Built in 2012 by Turkey Shipyard. Foreign flag. GRT: 456. Class:
BV 1 Hull + Mach, Escort, Salvage, FiFi 1, AUT-UMS, Water Spray, Oil Rec, Unrestricted
Nav. FO: 250m3. FW: 53m3. BW: 70m3. Winch: Double drum aft towing. Line Pull: 65T. Wire
Capacity: 800m + 400m x 52mm steel wire. Main Engines: 2 x CAT 3516B total 5,364BHP.
Schottel SRP1515CP prop(s). Bollard Pull astern 64MT. Bollard Pull: 65T. Speed about 13
free. Pump(s): 2 - FFS type SFP 250 x 350 1,350m3/h FiFi pumps. Genset(s): 2 - 150kW /
CAT C9 1,500RPM. Firefighting: 2 - FFS 1,200 / 300m3/h water / foam monitors + water
spray. Quarters: 10 persons. Air Conditioned. Galley. Cintranaval-Defcar design harbor,
escort, ship docking ASD tug. Single, split drum escort towing winch (forward) with 2 - 250m x
54mm synthetic line, with line pull of 80MT. 70T tow hook, tow pins, stern roller. Schottel
bowthruster is optional. Marcon sold other tugs from shipyard as sole broker. Mediterranean.
File: SU19257 Supply Boat - AHTS - 192.5' loa x 47.9' beam x 18.0' depth x 15.74' draft. Built
in 2005 by Yuexin; Panyu, China. Singapore flag. GRT: 1,470. BV I + Hull & Mach, Unrestricted,
FiFi 1. Deadweight: 1,400mt. Deck Cargo: 500MT on 350m2. FO: 475m3. FW: 230m3. DW:
460m3. Dry Bulk: 1,650ft3 in 4 tanks. Liq. Mud: 254m3. Crane: None. Winch: Double Drum
Elec/hyd. 2 - 5T capstans. 2 - 10T tuggers. Line Pull: 150MT@6m/m. Wire Capacity: 2 - 1,000m
x 56mm. Stern Roller. Main Engines: 2 x CAT 3516B total 5,150BHP. Berg CP prop(s). Kort
nozzle(s). Bowthruster 315kW. Bollard Pull: 65MT. Speed about 10-13kn on 12-19m3/d MGO.
Pump(s): FO: 150m3/h; FW: 100m3/h; DW: 100m3/h; Liq Mud: 2 - 70m3/h. Genset(s): 3 320kW / CAT 3408DITA; 1 - 52kW 415vAC 3ph 50Hz. Firefighting: Class 1. Water curtain all round. 1200m3/h; 300-1200m3/h
monitors. Quarters: 2-1, 4-2, 8-4 berth cabin. Air Conditioned. Galley. Passengers: 1 - 1 berth hospital. Foam / detergent 14m3
each. 300MT SWL Karmfork. Elec/hyd towpins with turntable top flaps. Elec/hyd rope reel. Oil dispersant system. Southeast Asia.
draft. Built in 2007 by Guangzhou Hantong, China. Singapore flag. GRT: 1,450. BV I +
Hull + Mach Tug Supply Vessel. Deadweight: 1,475mt. 375m2 deck. FO: 482kL. FW:
228m3. BW: 464m3. Dry Bulk: 1,650ft3 in 4 tanks. Liq. Mud: 259m3. Winch: 200T
brake Mentrade; 2 - 10T tuggers. Stern Roller. Main Engines: 2 x CAT 3516B total
5,150BHP. 4 Blades, Berg CP prop(s). Bowthruster 1 - 315kW. Bollard Pull: 68T.
Speed about 14kn on 14.7kL/d. Pump(s): Fire: 1,500m3/h; FO: 1 - 150m3/h; FW:
100m3/h; BW/DW: 100m3/h; LM: 2 - 70m3/h. Genset(s): 3 - 315kW / CAT 3408C; 1 65kW / Perkins. Firefighting: 2 monitors 1,200m3/h @ 12 bars; Foam 13.17m3;
Detergent 13.17m3. Quarters: 42 (2-1, 4-2, 8-4). Southeast Asia. End 2012.
www.marcon.com
72
File: SU19472 Supply Boat - AHTS - 194.3' x 49.0' x 20.0' depth x 16.23' loaded draft. Built
2007 by Fuijan Southeast Shipyard, China. Singapore flag. GRT: 1,678. ABS + A1 Towing,
FiFi 1; OSV AH (E) + AMS. Deadweight: 1,392mt. 340m2 clear deck. FO: 537kL. FW:
361m3. BW: 399m3. Dry Bulk: 1650ft3. Liq. Mud: 370m3. Winch: 200T brake Mentrade; 2 10T tuggers. Stern Roller. Main Engines: 2 x CAT 3516B total 5,150BHP. 4 Blades, Berg CP
prop(s). Bowthruster 1 - 315kW. Bollard Pull: 63T. Speed about 14kn on 14.7kL/d. Pump(s):
Fire: 1,500m3/h; FO: 1 - 150m3/h; FW: 100m3/h; BW/DW: 100m3/h; Liq.Mud: 2 - 70m3/h.
Genset(s): 3 - 315kW / CAT 3408C; 1 - 52kW. 2 monitors 1,200m3/h @ 12 bars; Foam
13.17m3; Detergent 13.17m3. Quarters: 42 (2-1, 4-2, 8-4). Southwest Asia. End 2012.
File: TG51115 Tug - Azimuthing - 115.0' loa x 37.7' beam x 18.4' depth x 15.70' loaded
draft. Built in 2011 by Southeast Asia. Foreign flag. GRT: 493. Class: BV. FiFi 1.
Deadweight: 250mt. 65m2 clear deck. FO: 220m3. FW: 30m3. Crane: Hiab 1,310kg @
9.7m. Winch: Hyd. Tow. Line Pull: 150T brake. Wire Capacity: 1,000m x 50mm. Stern
Roller. Main Engines: 2 x CAT 3516BHD total 5,150BHP. ASD - Schottel prop(s). Bollard
Pull: 62MT. Speed about 12.5kn. Pump(s): Bilge, FO, FW. Genset(s): 2 - 143kW / CAT
C6.6. Firefighting: FiFi 1, 3 monitors. Quarters: 12 crew in 7 cabins. Air Conditioned.
Newbuild ASD completed end of 2011. Southeast Asia. Prompt.
2007 by Tuong Aik Shipyard; Malaysia. Singapore flag. GRT: 1,079. BV 1 + Hull + Mac, Tug
Unrestricted. Deadweight: 323mt. 240m2 deck. FO: 450m3. FW: 200m3. DW: 100m3. Crane: 1 - 2MT
elec/hyd. Winch: Elec/hyd double drum towing / AH winch. 2 - 10T tuggers. Line Pull: 150MT@6m/m.
Wire Capacity: 2 - 100m 56mm. Stern Roller. Main Engines: 2 x CAT 3516B total 5,150BHP. Berg CP in
nozzles prop(s). Kort nozzle(s). Bowthruster 440kW. Bollard Pull: 60MT. Speed about 10-13kn on 1219m3/d MGO. Pump(s): FO: 100m3/h; FW: 70m3/h; DW: 50m3/h. Genset(s): 3 - 340kW / CAT3408
415vAC 3ph 50Hz. Firefighting: Class 1 with water curtain all round. Quarters: 27 in 10 cabins. Anchor
handling tug. 8m3 foam. 8m3 detergent. 300MT elec/hyd Karmfork. 2 elec/hyd towpins with turntable flat tops. Rope reel. Joystick.
Oil dispersant system. 300-1,200m3/h & 1,200m3/h fire monitors. Southeast Asia.
File: TG50139 Tug - Azimuthing - 117.1' loa x 37.7' beam x 18.4' depth x 15.90' draft. Built in
2011. RINA I +Hull +Mach / FiFi Ship 1 / Water Spray / Unrestricted / AUT-UMS. FO: 313.1m3.
FW: 48.8m3. BW: @55.8m3. Crane: Palfinger hyd 2,960kg @ 4m. Winch: Double drum hydraulic
aft + 70T SWL tow hook & tow pins. Wire Capacity: 2 - 750m x 52mm. Stern Roller. Main Engines:
2 x ABC 8DZC total 5,095BHP. Schottel 1515 CP 2,600mm dia prop(s). FiFi pumps PTO both
M/E. Range @ 2,000nm at @ 6kn towing speed. Bowthruster 150kW. Bollard Pull: @65MT.
Speed about @13kn trial on 14MT/d. Pump(s): Bilge / Ballast: 40m3/hr. Fire / GS: 40m3/hr.
Genset(s): 3 - 126kW / Volvo Penta D7-TA 400vAC 50Hz 3ph. Firefighting: Foam 17.4m3. 2 1400m3/hr pumps. 2 - Skum water / foam monitors. Quarters: 3-1, 1-2, 2-4 berth cabins. Air
Conditioned. Galley. Linepull: 45MT @ 5m/min. Newbuilding multipurpose ASD tug. Two sister tugs previously delivered. Dispersant
@ 17.4m3. Endurance @22 days. Curtain type water spray. 4.25m work / rescue boat. Full fendering. Oil dispersant booms.
Mediterranean.
File: TG46128 Tug - Twin Screw - 127.6' loa x 32.1' beam x 10.9' depth. Built in 1967
by Burton Shipyard; Port Arthur, TX. U.S. flag. GRT: 180. Class: ABS Loadline. FO:
73,000g. FW: 7,600g. BW: 15,000g. Winch: Burrard single drum. Line Pull: 110,000lb.
Wire Capacity: 2,800' x 2.25” IWRC. Main Engines: 2 x Fairbanks Morse 10-38D8-1/8
total 5,000BHP. 2 - 115” x 81” 5 blade SS prop(s) on 9” shaft(s). 10-38D8-1/8 12cyl.
Speed about 13kn light. Genset(s): 1 - 99kW / GM6-71; 1 - 99kW 280vAC.
Firefighting: 1 @ 5,000GPM w/50' hose. U.S. Northeast. Prompt.
File: SU19440 Supply Boat - AHTS - 194.0' loa x 40.0' beam x 17.0' depth x 15.00' loaded
draft. Built in 1974 by Halter Marine, Inc.; Moss Point, MS. Rebuilt: 1993. Panama flag.
GRT: 758. Class: BV. (Formerly ABS) FiFi 1. Deck Cargo: 500MT on 104' x 32' clear deck.
FO: 110,390g. FW: 109,271g. BW: 21,928g. Dry Bulk: 80m3 in 4 tanks. Liq. Mud: 200m3.
Winch: Smatco Double drum + 1 - 7MT & 1 - 5MT Tuggers. Line Pull: 125T. Stern Roller.
Main Engines: 2 x MWM TBD441V16 total 4,800BHP. Last Overhauled: 2008. 2 - Fixed (4
blade) prop(s). Range - 8,920nm. Bowthruster 300HP. Bollard Pull: 48T. Speed about 13kn
on 3,460gpd. Genset(s): 2 - 300kW / GM12V71 440/220vAC; 1 - 85kW / CAT3304.
Firefighting: 2 - 2,400m3/hr monitors, SOLAS. Foam - 20.4m3. Quarters: 12 crew. Air Conditioned. Galley. Passengers: 15.
Sprinkler system fitted. Dispersant system. No. Sea stacks. Completed 5 year drydocking in July 2008. Both engines and generators
overhauled. Currently working, but is available “as is, where is” basis. Mid East. End November 2012.
www.marcon.com
73
File: SU19450 Supply Boat - AHTS - 194.3' loa x 49.0' beam x 20.0' depth. Built in 2004 by Fujian
Southeast; China. Singapore flag. GRT: 1,690. ABS A1 (E) Towing Vessel, FiFi 1 + AMS. Deadweight:
1,348mt. Light Disp.: 1,543mt. Deck Cargo: 500MT on 350m2 clear deck. FO: 535m3. FW: 360m3. DW:
400m3. Dry Bulk: 6,600ft3 in 4 tanks. Liq. Mud: 370m3. Winch: Double drum. 2 - 5T capstans & 2 - 10T
tuggers. Line Pull: 200MT@5m/m. Stern Roller. Main Engines: 2 x CAT 3516B HD total 4,750BHP. 4
blade CP prop(s). Kort nozzle(s). Bowthruster 5T. Bollard Pull: 60MT. Speed about 11-13kn on 13MT/d
MGO. Genset(s): 3 - 315kW / CAT 415vAC 3ph 50Hz; 1 - 52kW. Firefighting: 2 - 1,550m3/h fire pumps &
2 - 1,220m3/h monitors. Quarters: 42 in 15 cabins. Galley. Passengers: 1 - 1 berth hospital. Foam 10m3.
Detergent 13m3. Rope reel. Shark jaw. Tow pin. Joystick. Class 1 FiFi with water curtain all around. Mid East.
File: TG43150 Tug - Twin Screw - 150.0' loa x 35.0' beam x 20.0' depth x 15.00' draft. Built in
1963 by Southern Shipbldg.; Slidell, LA. Rebuilt: 2004. U.S. flag. GRT: 290. Class: ABS + A1
Towing Service (E) + AMS. Continuous Hull Survey due 11/2014. FO: 100,000g. Winch: Single
Drum Markey / GM3-71 powered. Wire Capacity: 2,000' x 2”. Main Engines: 2 x CAT 3606 total
4,640BHP. 2 - FP prop(s). Repowered from Fairbanks in 2004. Genset(s): 2 - 60kW / GM8V71.
Air Conditioned. Galley. Raised foc'stle bow. Raised pilot house with @ 44' height of eye.
Previously worked with 18,125dwt drybulk ITB hopper barge. New Fernstrum coolers in 2004.
Totally rebuilt at Bollingers’ in 2004. Inviting firm cash offer. U.S. Gulf Coast. Prompt.
File: SU19223 Supply Boat - AHTS - 192.0' loa x 40.0' beam x 15.0' depth x 12.88' loaded draft. Built in 1982 by Halter Marine,
Moss Point, MS. Vanuatu flag. GRT: 820. Class: ABS +A1, E, +AMS. Deadweight: 932T. Light Disp.: 872T. 100' x 32' clear deck.
FO: 349T. Liq. Mud: 1,480BBL. Crane: 1 - 8T. Main Engines: 2 x EMD 12-645E7B total 4,610BHP. 2 - FP prop(s). Bowthruster 1 976BHP. Speed about 13kn on 16Tpd. Genset(s): 2 - 150kW 450v 60Hz. Firefighting: Fitted. Quarters: 21. For sale out of
competition on a strictly “as is, where is” basis. Southeast Asia.
File: SU19340 Supply Boat - AHTS - 192.5' loa x 40.0' beam x 15.0' depth x 7.40' light
draft x 12.80' loaded draft. Built in 1982 by Halter Marine; Moss Point, MS. Vanuatu flag.
ABS + A1 (E) Towing Service. Deadweight: 955T. Deck Cargo: 542LT on 100' x 32'
deck. FO: 112,400g. FW: 272,300g. Dry Bulk: 5,000ft3. Liq. Mud: 1,480BBL. Winch:
Fritz Culver. Line Pull: 220,000lb. Wire Capacity: 5000' 2”. Main Engines: 2 x EMD 12645E7B total 4,610BHP. 11,200nm at 10 knots. Bowthruster 4.5ST. Bollard Pull: 49MT.
Speed about 10-13kn on 100-190gph. Genset(s): 2 - 150kW / GM 12V71 450v 60Hz.
Firefighting: 1 - 800gpm @ 400. Quarters: 21. For sale out of competition on a strictly “as is, where is” basis. Southeast Asia.
loaded draft. Built in 1976 by J.G. Hitzler; Germany. Liberia flag. GRT: 800. Class: GL
+ 100 A4 Tug + MC. Deadweight: 871T. Deck Cargo: 444T on 105' x 30' clear deck.
FO: 742m3. FW: 132m3. DW: 443m3. Dry Bulk: 187m3. Liq. Mud: 243.5m3. Winch:
Double drum. 2 - 8T tuggers. Line Pull: 181T. Wire Capacity: 800m. Stern Roller. Main
Engines: 2 x B&W 8V22 total 4,600BHP. CP prop(s). Kort nozzle(s). Bowthruster
400HP. Bollard Pull: 60MT. Speed about 14.5kn. Genset(s): 2 - 336kW, 2 - 112kW & 1
- 60kW 380/220vAC. Firefighting: 2 - monitors @ Total 600MT/hr. Try best offers after
inspection. Laid up. “as is, where is” Africa West Coast. Prompt.
6.60' light draft x 12.60' loaded draft. Built in 1983 by Eastern Marine;
Panama City, FL. U.S. flag. GRT: 275. Class: ABS + A1, AMS, E, Towing
Service exp. Mar 2008. Deadweight: 1,114T. Deck Cargo: 770LT on 108' x
31' clear deck. FO: 77,040g. FW: 12,000g. DW: 163,560g. Dry Bulk:
5,400ft3. Liq. Mud: 1,600BBL. Winch: Smatco 66 DAW 200 Double Drum
+5T tugger. Line Pull: 250,000lb. Wire Capacity: 2,550' x 2.25”. Stern Roller.
Main Engines: 2 x EMD 16-645E7D3A total 4,500BHP. 2 - Fixed Pitch 90” x
68” prop(s). Bowthruster 300HP. Bollard Pull: 40.8T. Speed 9-14kn on 83-203gph. Genset(s): 2 - 99kW / GM 8V71 450v 60Hz.
Firefighting. Quarters: 18 crew in 7 cabins. For sale “as is, where is” out of competition. U.S. Gulf Coast.
File: TG45131 Tug - Twin Screw - 131.2' loa x 38.7' beam x 15.0' depth. Built in 2012 by
Chinese Yard. Foreign flag. Class: ABS + A1 (E), AMS, Towing Service Anchor Handling Tug
for Unrestricted Service. Deck Cargo: 350T on 120m2 clear deck. FO: 281m3. FW: 61m3.
Crane: 3T @ 14m. Winch: AH Towing winch; 2 - 10T tuggers. Line Pull: 75T/150Tbr. Wire
Capacity: 1,000m x 41mm. Stern Roller. Main Engines: 2 x CAT 3512C total 4,500BHP. 2 FP prop(s). Kort nozzle(s). Bowthruster 3.2T. Bollard Pull: abt. 52T. Genset(s): 3 - 350kW /
Cummins. Firefighting: 1/2 FiFi system; 1 - 470m3 monitor. Quarters: 18 (2-1, 2-2, 2-6). Air
Conditioned. Anchor Handling tug. Combined shark jaw/towing pin SWL 200T. Far East.
www.marcon.com
74
File: TG45132 Tug - Twin Screw - 131.2' loa x 38.7' beam x 14.9' depth x 10.50' loaded draft. Built in 2012. Foreign flag. Class:
ABS A1 AMS Towing. 120m2 clear deck. FO: 281m3. FW: 61m3. Total 4,500BHPBollard Pull: 52T. Speed about 12kn. Passengers:
18. Multi-purpose AHT. Far East. Q4 2012.
draft. Built in 2012 by Guangzhou Hangtong Ship Ind. Co. Ltd. Singapore flag. GRT:
1,459. BV I Hull E Mach, Supply Vessel, Tug, Special Service Anchoring Handling
Vessel, FiFi 1-Water Spray, Unrestricted Nav, DPS-1. Deadweight: 1,375mt. Deck
Cargo: 600MT on 370m2 clear deck. FO: 520m3. FW: 260m3. DW: 390m3. BW:
390m3. Dry Bulk: 187m3. Liq. Mud: 130m3. Crane: 5.9MT @ 4m. Winch: Double
drum Mentrade 200T brake. Line Pull: 150T. Wire Capacity: 1,000m x 56mm. Main
Engines: 2 x CAT 3516B total 4,462BHP. 2 prop(s). Bowthruster 2 - 515kW. Dynamic
Positioning. Bollard Pull: 65T. Speed about 10-13.5kn on 6.5-18.1MT/d. Genset(s): 2 450kWe CAT / 1 - 65kWe CAT 415v 3ph 50Hz. Firefighting: 2 - 1,200m3/h monitors / Water Curtain. Quarters: 42 (2-1, 4-2, 8-4).
300T Shark Jaws / 200T tow pins. Southeast Asia.
File: TG44135 Tug - Twin Screw - 135.8' x 34.4' x 17.4' depth x 14.40' loaded
draft. Built 1977 by Jonker & Stans; Holland. Foreign flag. GRT: 557. BV I 3/3 E +
Tug Deep-sea AUTO-OS. Special Survey completed 2008. 50' x 30' clear deck.
FO: 503MT. FW: 133MT. DW: 50MT. Crane. Winch: Ysselwerf single drum
hydraulic. Wire Capacity: 3,600' x 2”. Stern Roller. Main Engines: 2 x Alco 12251F total 4,460BHP. Seffle CP stainless props. Kort nozzles. Range - 7,200 mi.
Bowthruster 208BHP. Bollard Pull: 63.6MT. Speed about 10kn on 150gph.
Genset(s): 1 - 288kVA; 1 - 96kVA / CAT 440vAC 60Hz. 500gpm FiFi. Quarters: 13
in 9 cabins. Raised foredeck. Electric bow thruster. Bollard pull 70MTat 100%
MCR. Tow pins. H-bitt aft of winch. New compressors & fire monitors in 1996.
Class renewal, drydocking, rebuild of CPP system early 2008. BV certified BP at 63.6mt. Caribbean.
File: SU13729 Supply Boat - AHTS - 137.8' loa x 36.1' beam x 16.1' depth x 11.50' light draft x
13.61' loaded draft. Built 2011 by Chinese Yard. Foreign flag. GRT: 499. Class: BV I + Hull + Mach
Special Service Multi-purpose AHT Unrestricted Navigation. 160m2 clear deck. FO: 363.53m3. FW:
78.49m3. Crane: 1.25MT/8MT @ 9.75m/2m. Winch: Double Drum 180MT brake. Line Pull: 65MT.
Wire Capacity: 52mm x 1000m; 600m x 52mm. Stern Roller. Main Engines: 2 x Cummins QSK60-M
total 4,400BHP. 2 FP 4 blades prop(s). Kort nozzle(s). Bowthruster 335BHP. Bollard Pull: 60mt.
Speed about 14kn. Pump(s): FO: 40m3/h; FW: 36m3/h. Genset(s): 2 - 245kW / CAT 3406mSG 400v
50Hz; 1 - 60kW / Cummins CCFJ-60Y. Firefighting: 2 - monitors 1,000m3/h @135m; Foam: 9.27m3.
Quarters: 22 person. Hydraulic shark jaw: 200MT. Tow pin: 200MT. Far East.
14.43' loaded draft. Built in 1972 by Carrington Slipways; Australia. Foreign flag.
GRT: 883. Class: LR Ocean (disc. 05/2001) now Isthmus. Deck Cargo: 500T on
27.4m x 10.1m clear deck. FO: 275T. FW: 115T. DW: 320m3. Dry Bulk: 3,500ft3
(3 tanks). Winch: Double drum Swaan/CATD334. Main Engines: 4 x Daihatsu
8PSHTCM26D total 4,400BHP. 2 prop(s). Kort nozzle(s). Bowthruster 3.5T.
Bollard Pull: 50MT. Speed about 10kn. Genset(s): 2 - 250kW / CAT D343 415vAC
50Hz. Firefighting: 120Tph. Quarters: 24 total. Inviting best offers. Mid East.
File: SU19629 / SU19630 / SU19645 Supply Boats - AHTS (3 total) - 196.8' loa x 46.6' beam x 19.7' depth x 16.70' loaded draft.
Built in 2012 by Chinese Shipyard. Hong Kong flag. GRT: 1,576. Class: BV 1 + Hull + MACH + DYNAPOS AM/TR, Supply Vessel,
Tug, Special Service AHTS, OSV, Standby Vessel, FiFi 1, Unrestricted.
Deadweight: 1,974mt. Deck Cargo: 600T on 330m2 clear deck. FO:
578.6m3. FW: 296.9m3. DW: 234.4m3. Dry Bulk: 136m3 in 4 tanks. Liq.
Mud: 220.55m3. Crane: 2T with 9.75m outreach. Winch: Double drum
200T brake; 2 - 5T capstans; 2 - 10T tuggers. Line Pull: 75T. Wire
Capacity: 1,000 x 52mm. Stern Roller. Main Engines: 2 x CAT 3516B
total 4,400BHP. Berg CP prop(s). Stern thruster 400kW. Bowthruster 2 550kW. Dynamic Positioning. Bollard Pull: 56T. Speed about 12kn.
Pump(s): Liqmd: 2 - 30-60m3/h dual speed Desmi. Genset(s): 1245kW/CAT 3406C, 2-450kW/CAT C-18, 1-100kW/Deutz 400vAC 50Hz
3ph. Firefighting: 2 - 1,550m3/h pumps; 300/1,200m3/h foam/sea-water FFS monitor. Quarters: 46 persons (2-1, 16-2, 3-4). FiFi-1
anchor handling tug supply vessel. Hydraulic shark jaws & tow pins 200T. Kongsberg K-POS DP-21 system. Far East.
www.marcon.com
75
File: TG44072 / TG44073 Tugs - Azimuthing (2 each) - 98.4' loa x 35.4' beam x 17.7' depth x
11.81' loaded draft. Built in 2008 in China. Hong Kong flag. GRT: 469. Class: BV1 + Hull + MACH,
Salvage Tug / Utility Boat / FiFi I Unrestricted Navigation. FO: 250m3. FW: 110m3. Crane: [email protected] / 8MT@2m SWL. Winch: 1-Electro Hyd tow winch 100MT; Electro hyd. AHT 80MT.
Main Engines: 2 x Cummins QSK60M total 4,400BHP. 2 - Aquamaster prop(s). Bowthruster. Bollard
Pull: 66.8MT. Genset(s): 3 - 116kW / Perkins 400v 50Hz. Firefighting: FIFI as per BV classification.
Quarters: 2-1, 2-2, 2-4 cabins. Air Conditioned. Galley. Sewage treatment plant. Bollard pull ahead
66.8MT & 63.6MT astern. Southeast Asia. Prompt.
2011 by Zhuhai Chenlong Shipyard; China. Singapore flag. GRT: 475. Class: BV 1 3/3 + Unrestricted.
144m2 clear deck. FO: 350m3. FW: 116m3. DW: 26m3. Winch: Double drum waterfall + 1 - 5T Tugger;
1 - 2T capstan. Main Engines: 2 x Daihatsu 6DKM-26F(L) total 4,400BHP. 2 - FP Kaplan prop(s). Kort
nozzle(s). Endurance 20 days. Bowthruster 3MT. Bollard Pull: 58.5MT. Speed about 12kn service.
Pump(s): Bilge/Ballast: 35m3. Genset(s): 2 - 240kW 415/230vAC 3ph 50Hz; 1 - 64kW / emergency.
Firefighting: 2 - 600m3 monitors; 1 - 25m3 @ 35m pump. Quarters: 16 crew in 6 cabins. Air
Conditioned. Anchor handling tug. 100T shark jaw and guide pins. Certified bollard pull. Far East.
15.25' loaded draft. Built in 1970 by Gulfport SB. Rebuilt: 2000. U.S. flag. GRT: 198. Formerly
ABS +A1. (5yr SS done June 2006) exp. 2010. FO: 125,650g. FW: 7,060g. Winch: Single drum
Burrard HJ-5/GM6-71. Wire Capacity: 2,800' x 2.25”. Stern Roller. Main Engines: 2 x Fairbanks
Morse 12-38D8-1/8 total 4,400BHP. Last Overhaul: 2000. 120” x 108” prop(s) on 10.75”
shaft(s). Direct reversing. Speed about 12-14kn. Genset(s): 2 - 98kW / GM6-71 450vAC 60Hz
3ph; 1- 15kW. Quarters: 10 crew. Galley. Marcon has sold tug twice and longterm chartered
once in her lifetime. Tug laid-up last few years with class allowed to lapse. Raised pilot house
installed in 2008. Sale strictly “as is, where is”. Try ALL outright cash offers. U.S. Gulf Coast.
File: TG44144 Tug - Twin Screw - 124.6' loa x 35.4' beam x 16.4' depth x 13.10' loaded draft. Built
in 2012 by Malaysian Shipyard. Malaysia flag. GRT: 494. Class: BV. Winch: Double drum waterfall
150T SWL. Stern Roller. Main Engines: 2 x Cummins QSK 60-M total 4,400BHP. 4-blade fixed pitch
prop(s). Kort nozzle(s). Bowthruster 125kW. Bollard Pull: 53-54MT. Speed about 12-12.5kn.
Pump(s): Bilge & Ballast: 35m3/h; GS & Fire: 35m3/h; FO: 20m3/h; FW: 20m3/h. Genset(s): 2 250kW / Cummins QSM 11D(M) 415vAC 3ph 50Hz. Firefighting: FiFi 1/2. 2 - 600m3/hr monitors.
1,400m3/hr pump. Quarters: 2-1,1-2,3-4 berth cabins. Air Conditioned. Galley. Anchor handling tug.
1 - 10T tugger winch. 1 - 5T capstan. 150T SWL shark jaw & tow pins. 75mm thick hardwood
sheathing on aft deck. Water spray system around wheelhouse. Southeast Asia. 3 months.
Built in 2010. GRT: 149. Class: ABS + A1 + AMS AHT Offshore Support Vessel, SOLAS.
Deadweight: 314T. Deck Cargo: 300T on FO: 320m3. FW: 150m3. Crane: 1 - 2T @ 6m. Winch:
Macgregor-Plimsoll Double drum 150T brake; 2 - 10T Tugger. Wire Capacity: 2-1,000m x 52mm.
Stern Roller. Main Engines: 2 x Cummins QSK60 total 4,400BHP. 2,300mm Kaplan FP prop(s).
Kort nozzle(s). Bowthruster 1 - 5T. Bollard Pull: 65T. Speed about 12.5-13.5kn. Genset(s): 3 245kW / CAT 3406 415v 3ph 50Hz. Firefighting: FiFi: 1-1,200m3 Pump; 2 600m3/h monitors.
Quarters: 2-1, 2-2, 4-3. Air Conditioned. Galley. 2-5T capstans, 1,000m storage reel, & Plimsoll
Smit Berger shark jaws / tow pins. Southeast Asia.
File: TG43410 Tug - Azimuthing - 108.6' loa x 31.5' beam x 16.4' depth x 14.00' loaded draft. Built in
1987 by Cochrane-Selby; U.K. St Vincent/Grenadine flag. GRT: 376. Class: LR 100A1 Tug; Dtp Class
VII. Deadweight: 297T. FO: 198.6m3. FW: 22.47m3. BW: 70.61m3. Winch: Winch/windlass forward &
hook aft. Main Engines: 2 x Ruston 6RK270M total 4,340BHP. Aquamaster US2001/3150 prop(s).
6RR-270m/270 x 305mm. Astern pull @ 50MT. Bollard Pull: 55MT. Firefighting: 2 foam/water each,
300m3/h @ 120m. Quarters: 8. ASD (Azimuth Stern Drive) harbor/coastal terminal tug. Oil dispersal
tank 14.2MT. Foam 31.72m3. Special Survey & drydock October 2012. South America West Coast.
File: TG43123 Tug - Twin Screw - 124.0' loa x 33.1' beam x 19.9' depth x 15.00' light draft x 18.00'
loaded draft. Built in 1967 by Gulfport Shipbldg; Port Arthur, TX. U.S. flag. GRT: 194. Class: ABS + A1
Towing + AMS. FO: 70,378g. FW: 2,467g. Winch: Markey TYS-36 single drum. Wire Capacity: 2,200'
x 2.25”. Main Engines: 2 x EMD 12-645E5 total 4,300BHP. 2 - FP prop(s). Genset(s): 2 - 125kW /
GM8V - 71. Quarters: 8 in 7 staterooms. Galley. Elevated pilot house & raised foc'stle bow. 70.3'
highest fixed point. 45' height of eye. Previously handled 192,000DWT bulk barge. Although not
officially on market, we may develop on private & confidential basis. U.S. Northeast.
www.marcon.com
76
draft. Built in 1983 by Goole Shipbuilders; Goole, U.K. Vanuatu flag. GRT: 806. Class: ABS
A1 AMS Special Survey date 09/2008. Deadweight: 1,018T. Light Disp.: 1,040T. 111' x 33'
clear deck. FO: 198T. Liq. Mud: 2,000BBL. Main Engines: 2 x Mirrlees 6MB275 total
4,224BHP. 2 - CP prop(s). Bowthruster. Speed about 12.5kn on 10Tpd. Genset(s): 2 500kW 440vAC 60Hz; 1 - 250kW. Quarters: Total 24 persons. “as is, where is”. Owner
prefers sale out of competition. Sale subject to management approval. Southeast Asia.
draft. Built in 1972 by Burton Shipyard; Port Arthur, TX. Bahrain flag. GRT: 558. Class: BV 1
Tug Unrestricted Navigation, SS due in 2014. Deadweight: 1,145. Deck Cargo: 471 on 108' x
31.5' clear deck. FO: 250T. FW: 400m3. Dry Bulk: 57m3 in 4 tanks. Crane: 3T. Winch: Markey
Model TDSD-28 D/Drum. Line Pull: 113T. Wire Capacity: 610m x 45mm. Stern Roller. Main
Engines: 2 x EMD 16-567 BCRL total 4,200BHP. 2 - Fixed prop(s). Bowthruster 300HP. Bollard
Pull: 50MT. Speed about 8.5kn on 5.8T/d. Genset(s): 2 - 75kW Delco / GM6-71 220vAC 60Hz.
Quarters: 16 total. Air Conditioned. Working. Reportedly in good condition. Mid East.
File: SU18240 Supply Boat - AHTS - 182.9' loa x 39.0' beam x 18.1' depth x 15.40' loaded draft. Built
in 1971 by Verlome Scheepswerf, Holland. Foreign flag. GRT: 888. Class: Maritime Services Limited
(ex- RINA Class: withdrawn 06/2002). Ice strengthened. Deadweight: 980mt. 95.1' x 32' clear deck.
Crane: 1 - 2T / 14m Brevini. Winch: KARMOY Single drum with automatic spooling & tugger. Main
Engines: 4 x Polar Nohab SF16RSF total 4,200BHP. 2-CP Scania Volda props. Kort nozzles.
Bowthruster 300HP. Bollard Pull: 51MT. Genset(s): 1 - 280kVA, 1 - 60kVA & 1 - 45kVA. Firefighting:
Fifi fitted. Quarters: 11 cabins - 1 & 2 man. Stern roller, winches, mud tanks, etc. all removed when
vessel converted. Extensive hydraulic system in engine room (2 - 30kW 130LPM). Complete overhaul.
Now certified by local maritime authority. Sea trials Summer 2012. List of major repairs on request. Caribbean.
File: TG39002 Tug - Twin Screw - 139.0' loa x 34.0' beam x 17.2' depth x 10.60' light
draft x 14.10' loaded draft. Built in 1976 by Burton Shipyard; Port Arthur, TX. Rebuilt:
2000. U.S. flag. GRT: 198. ABS +A1, Towing Service +AMS. Drydocking due May 2014.
Special due Sep 2015. Deadweight: 647T. FO: 129,000g. FW: 12,300g. BW: 122,400g.
Winch: Intercon 74077 double drum. Line Pull: 100T. Wire Capacity: 2 x 2,200' 2”. Main
Engines: 2 x EMD 16-645E6 total 4,200BHP. 4 blade 115”x88” stainless props.
12,400nm range @ 10kn. Bollard Pull: 52.5ST. Speed about 10-12.5kn on 104-179gph.
Genset(s): 2-99kW / GM8V71 450v 60hz. Quarters: 8 berths. Hydraulic tow pins. 65 ton
electric barge winches. Keen Seller inviting serious cash offers. U.S. Gulf Coast.
Prompt.
in 1978 by Kochi Jukogyo Kochi; Japan. India flag. GRT: 969. Indian Registry of Shipping.
Deadweight: 704mt. FO: 575MT. FW: 215MT. Crane: 1-Hiab 180 Sea Crane 10T max. Derrick/AFrame: 1-10T SWL. Winch: Double drum waterfall with quick release. Wire Capacity: 640m x 64mm.
Stern Roller. Main Engines: 2 x Niigata 6MG31EZ total 4,200BHP. CP Kamome steering props. Kort
nozzles. 45 day range. Bowthruster 300HP. Bollard Pull: 48MT. Speed about 10-12kn on 9Tpd.
Pump(s): 3 - 300m3/h portable & 1 - 640m3/h fire. Genset(s): 2 - 250kVA / Yanmar 440v 3ph 60Hz.
FiFi 1/2: 2 - 300m3/h water & 1- 600m3/h water/foam monitors. Quarters: 12 crew. Passengers: 12.
Salvage & anchor handling tug. 1,000m 54mm spare wire. 2 each tuggers on main deck and forward. Mid East.
draft. Built in 1983 by Torrens; Port Adelaide, Australia. Vanuatu flag. GRT: 1,141. ABS A1
(E), AMS, ACCU. Deadweight: 1,503T. Deck Cargo: 575MT on 86.92' x 36.08' clear deck.
FO: 554m3. FW: 727m3. Winch: Norwinch Double drum waterfall. Wire Capacity: 2-900m x
52mm dia. Stern Roller. Main Engines: 2 x Nohab F38A total 4,040BHP. 2 - CP prop(s). Kort
nozzle(s). Bowthruster. Bollard Pull: 65MT. Speed about 12-13kn on 8-13MT/d. Pump(s): FW:
2-55m3/hr @ 56m head. FO: 554m3/hour. Genset(s): 2 - 150kW, 2 - 40kW 415v 50Hz. FiFi
class 1, 2 - 2,400m3/hr @ 120m head. Quarters: 10. Passengers: 8. 300MT shark jaws. “As
is, where is”. Southeast Asia.
Built in 1972 by Adelaide Ship Const.; Australia. Rebuilt: 2000. India flag. GRT: 817. Indian
Register of Shipping. Deadweight: 730mt. Deck Cargo: 400T on 30m x 10m deck. FO: 330MT.
FW: 521MT. Dry Bulk: 150m3. Crane: 1 - 3.5T. Winch: Double drum 112mt SWL Smatco + 2-7T
tuggers. Wire Capacity: 600m x 52mm. Stern Roller. Main Engines: 2 x EMD 16-645E2 total
4,000BHP. Bowthruster 280BHP. Bollard Pull: 45mt. Pump(s): FO: 50m3/hr @ 60m; FW: 75m3/hr
@ 60m; DW: 75m3/hr @ 60m; FiFi: 330m3/hr. Genset(s): 2 - 100kVA / GM6-71; 1 - 65kVA
415vAC 50Hz. FiFi 1/2. Quarters: 12 crew. Passengers: 12. Mid East.
www.marcon.com
77
File: SU18829 / SU18834 Supply Boats - AHTS (2 each) - 188.4' loa x 38.4' beam
x 15.7' depth x 13.80' loaded draft. Built in 1983 by Teraoka Shipyard.; Japan.
Vanuatu flag. GRT: 887. Class: ABS + A1, Towing Vessel + AMS, Unrestricted
Service. Deadweight: 874T. 104' x 27' clear deck. Liq. Mud: 1,459BBL. Main
Engines: 2 x Yanmar 8Z280-ET total 4,000BHP. 2 - FP prop(s). Bowthruster. Speed
about 12.5kn. Laid up. Africa West Coast.
File: SU18948 / SU18950 Supply Boats - AHTS (2 each) - 190.0' loa x 44.0' beam x 16.0'
depth x 8.00' light draft x 13.60' loaded draft. Built in 1999 by Eastern Marine, Panama City,
FL. U.S. flag. GRT: 1,004. Class: ABS + A1 + AMS USCG Sub L. Not SOLAS ready.
Deadweight: 1,310mt. Light Disp.: 844mt. Deck Cargo: 440MT on 4,041ft2 clear deck. FO:
68,704g. FW: 8,650g. DW: 221,341g. Dry Bulk: 7,200ft3. Liq. Mud: 2,053BBL. Calcium
Chloride / Brine: 86,258g. Winch: Smatco 72 DAW double drum waterfall + tugger. Line Pull:
134LT. Stern Roller. Main Engines: 2 x CAT 3516B total 4,000BHP. 2,590mm stainless
prop(s). Bowthruster 500HP. Bollard Pull: 42MT. Speed about 11-12kn on 108-210gph.
Genset(s): 2 - 175kW / CAT 3306. Firefighting: 1,000gpm. Quarters: 18 berths / 7 cabins. Fritz
Culver tow pins. Certified to carry 2 x 500BBL tanks which can be used for liquid mud bringing
total capacity over 3,000BBL (tanks measure 34'L x 10'W X 8'H). Sold by Marcon in 2001 to
last operator. For sale direct from bank-owner. May also consider charter subject to credit
review. U.S. Gulf Coast.
File: SU19738 Support Vessel - 197.8' loa x 38.7' beam x 17.4' depth. Built in 1997 by
Ishii Zosen; Japan. Panama flag. GRT: 998. Class: NK, Ocean Going International
SOLAS Compliant. Deadweight: 1,174T. Deck Cargo: 500T on 98.4' x 32.8' clear deck.
FO: 450m3. FW: 514m3. Crane: 1 - 7.5T @ 7.5m knuckle revolving. Winch: Waterfall, 70T
brake. Line Pull: 45T@4m/mm. Wire Capacity: 46mm-1,000m. Main Engines: 2 x Yanmar
6N260EN total 4,000BHP. 2 - variable pitch prop(s). Kort nozzle(s). 13,500nm range.
Bowthruster 520BHP. Bollard Pull: 45T. Speed about 12.5-14.25kn. Genset(s): 2 - 250kVA
AC 440/220v 60Hz; 1 - 125kVA AC 440/220v 60Hz. Quarters: 40. Multi-purpose workboat.
14-1, 5-2, 2-4 & 1-8 man rooms. Joystick control. 2 - 7T tuggers. Africa West Coast.
File: SU21133 Supply Boat - AHTS - 211.0' loa x 43.0' beam x 20.0' depth x 17.30' loaded draft. Built in 1977 by Appledore
Shipbuilders Ltd. Vanuatu flag. GRT: 1,326. Class: ABS + A1 + AMS. Special Survey due 02/2012. Drydocking overdue 04/2010.
Deadweight: 1,835T. Light Disp.: 1,150lt. 136' x 33' clear deck. FO: 78MT. Liq. Mud: 2,150BBL. Crane: Fitted. Main Engines: 2 x
Mirrlees ESL16MGR total 4,000BHP. 2 - FP prop(s). Bowthruster. Speed about 14kn. Genset(s): 1 - 250kW 440v 60Hz; 2 - 200kW
440v 60Hz. Quarters: 36 persons total. Four point mooring. For sale “as is, where is” out of competition. Africa West Coast.
Halter Marine Services Inc. U.S. flag. GRT: 198. ABS +A1 Towing Service, +AMS. FO: 83,302g.
FW: 5,086g. BW: 11,411g. Winch: Markey. Wire Capacity: 2,000' 2”. Stern Roller. Main
Engines: 2 x EMD 16-645E6 total 4,000BHP. 4 blade 100”x76” props. Speed @ 8.5/10kn on 8095gph. Genset(s): 2 - 99kW / GM6-71. Quarters: 10 in 5 cabins. Air Conditioned. Galley. Upper
pilothouse. Molded “D” fendering system. Laid up. U.S. Gulf Coast.
draft. Built in 1974 by Towa Zosen; Japan. Panama flag. GRT: 633. Class: RINA.
Deadweight: 584T. 1 hatch(es). Hatch Sizes: 1.9mx1.9m. FO: 500MT. FW: 93.5m3. Crane:
1 - 5T 10m. Winch: Single drum + 65T tow hook. Line Pull: 30T@9m/min. Wire Capacity:
1,000m x 52mm. Stern Roller. Main Engines: 2 x Niigata 6MG31EZ total 4,000BHP. Range
13,000nm 45 days. Bowthruster 2T. Bollard Pull: 55.5T. Speed about 10-12kn free on 911Tpd. Genset(s): 2 - 250kVA / Niigata 440/220v. Quarters: 10 crew. Passengers: 22
supernumeraries. Deep Sea Towing Tug. Far East. Prompt.
1998 by East Isle; George Town Canada. Netherlands flag. GRT: 392. Class: LR + 100 A1. Deadweight:
145T. Main Engines: 2 x CAT 3516TA total 4,000BHP. Aquamaster prop(s). Speed about 12.5kn.
Genset(s): 2 - 170kW / CAT 3306DIT 480vAC 60Hz. Europe.
Built in 2000 by Seaboats Inc.; Fall River, MA. U.S. flag. GRT: 157. Renewed ABS Loadline July
2012. FO: 56,000g. FW: 5,800g. Winch: Almon-Johnson Hyd single drum. Wire Capacity: 2,400'
x 2”. Main Engines: 2 x Alco 251E total 4,000BHP. 2 - FP prop(s). Pump(s): 2 - Bilge / Ballast;
FO transfer. Genset(s): 3 - 65kW / CAT 3304 120/208vAC 60Hz. Firefighting: Pump. Quarters: 7
persons in 3 cabins. Upper pilot house. U.S. Northeast.
www.marcon.com
78
draft. Built in 1999 by Nam Cheong Dockyard; Malaysia. Singapore flag. GRT: 723. ABS +
A1, Towing Vessel (E) + AMS, Unrestricted Service. Deadweight: 666mt. Deck Cargo: 100T
on 160m2 deck. FO: 450T. FW: 250T. Crane: Deck 5MT @ 9m. Winch: Plimsoll 145MT
brake double drum, 2 - 5MT tuggers. Line Pull: 120MT. Wire Capacity: 1,200m x 60mm.
Stern Roller. Main Engines: 2 x Yanmar 6Z280A-EN total 4,000BHP. Kamome CP props.
Kort nozzles. Bowthruster 5MT. Bollard Pull: 48T. Speed @12kn max on 7Tpd. Genset(s): 2
- 304kW AC. 26 berths. Anchor handling tug / utility vessel. 250MT shark jaws. Mid East.
Built in 2003 by PT Batamec; Batam, Indonesia. Mexico flag. GRT: 394. Class: ABS, A1, AMS.
FO: 53,000g. FW: 18,500g. BW: 25m3. Winch: 50T Double drum waterfall. Main Engines: 2 x
CAT 3516B total 4,000BHP. 2 - FP prop(s). Kort nozzle(s). 16 cylinder, 4 stroke. Bollard Pull:
41ST. Speed about 11kn on 125gph. Pump(s): Fuel Oil, Bilge, Fire, Oily Water Separator.
Genset(s): 2-152kW/Cummins CT8.3DM/Stamford 415v 50Hz; 1-32kW/Yanmar emerg.
Quarters: 14. Galley. Fendering bow, sides and stern. No Jones Act trade. Mexico.
1972 by Schpsw. Bodewes Millingen; Holland. Panama flag. GRT: 545. LR + 100 A1 Tug LMC. Special
Survey due 04/2015. Deadweight: 382T. Deck Cargo: 70MT on 144m2 clear deck. FO: 220.66MT. FW:
55MT. Winch: Norwinch double drum waterfall. Line Pull: 100MT. Wire Capacity: 850m 52mm. Stern
Roller. Main Engines: 2 x Stork Werkspoor 6SW280 total 3,940BHP. 2 - CP prop(s). Kort nozzle(s).
Fitted with Becker rudders. Repowered with new engines 06/1996. Bowthruster 200BHP. Bollard Pull:
60T. Speed about 14kn free. Pump(s): FO: transfer 40MT/h @ 40m. Genset(s): 3 - 119kW 440vAC
60Hz. Firefighting: 150m3/h pump. Two water jet monitors on platform between stacks. Quarters: Total
13 persons. Anchor handling & firefighting. 2-12T tugger winches. 1-5T capstan. Two retractable towing pins. Mediterranean.
File: TG39182 Tug - Triple Screw - 182.3' loa x 35.8' beam x 24.6' depth x 18.05'
loaded draft. Built in 1980 by Zavoid Leninskaya Kuznitsa, Kiyev. Foreign flag. GRT:
931. Class: Turk Loydu + 1A5 Tug + M. Deadweight: 357mt. FO: 179T. Main Engines:
Powered by twin 720HP CAT (new 2000) and one 2,500HP Kolomna diesels total
3,940BHP. 3 - FP prop(s). Kort nozzle(s). Bowthruster 220BHP. Bollard Pull: 55MT.
Speed about 12kn on 8Tpd. Genset(s): 3 - 220kW / SKL. Quarters: 28 persons. Ocean
going salvage / supply tug. Mediterranean.
File: SU18587 Supply Boat - AHTS - 185.0' loa x 40.0' beam x 14.0' depth x 12.10' loaded draft. Built in 1983 by Halter Marine;
Gulfport, MS. Malaysia flag. GRT: 722. Class: AB + A1 Tow Service (E) + AMS. Deadweight: 841T. Light Disp.: 555T. 93' x 32' clear
deck. Liq. Mud: 914BBL. Main Engines: 2 x EMD 16-645CE6 total 3,900BHP. 2 - FP prop(s). Bowthruster. Speed about 12kn.
Genset(s): 2 - 150kW. Firefighting: Fitted. Quarters: 16 crew. For sale “as is, where is” out of competition. Southeast Asia.
File: TG38106 Tug - Twin Screw - 110.0' loa x 32.4' beam x 14.0' depth x 6.70' light draft. Built
in 1970 by Main Iron Works, Houma, LA. U.S. flag. GRT: 190. Class: ABS + A1, Towing Service.
FO: 55,135g. FW: 2,055g. DW: 32,351g. BW: 21,225g. Winch: Markey Single Drum. Line Pull:
120ST. Wire Capacity: 2000' x 2.125”. Main Engines: 2 x EMD 16-645E2 total 3,900BHP. 2 - FP
108” x 76” 4 blade prop(s). Bollard Pull: 47.7ST. Speed about 8.5-10kn on 80-95gph. Genset(s):
2 - 60kW / GM6-71 480v 60Hz 3ph. Firefighting: 1 - 2,700gpm. Quarters: 10 in 5 cabins. Air
Conditioned. Galley. Raised pilot house. U.S. Gulf Coast.
Halter Marine Services Inc. U.S. flag. GRT: 198. Class: ABS +A1. Towing Service +AMS. FO:
83,302g. FW: 5,068g. BW: 11,411g. Winch: Markey TDS-32. Wire Capacity: 2,000' x 2”. Main
Engines: 2 x EMD 16-645E2 total 3,900BHP. 2 - FP prop(s). Bollard Pull: 34.5T. Speed about
8.5-10kn on 80-95gph. Genset(s): 2 - 99kW / GM 480v 60Hz 3 ph. Quarters: 10 in 5 cabins.
Air Conditioned. Galley. Raised pilot house. Laid up. U.S. Gulf Coast.
File: TG39088 Tug - Azimuthing - 95.0' x 34.5' x 13.3'. Built in 1985 by Eastern Marine; Panama
City. U.S. flag. GRT: 194. ABS +A1, Towing, +AMS Unrestricted. FO: 52,208g. FW: 7,692g. BW:
10,000g. Winch: McElroy DT-54 + 2 Smatco capstans. Line Pull: 13.6MT. Wire Capacity: 2,400' x
2.25”. Main Engines: 2 x EMD 16-645E6 total 3,900BHP. Last Overhauled: 2006. 92” Ulstein 1650
Z-drives. Range abt. 4,000 miles. Bollard Pull: 48.7ST. Speed about 10.5-12.5kn. Genset(s): 2 175kW Detroit 8V-71 / 480v. Firefighting: 1 @ 3,000g/min, 4 @ 150g/min; w/50' hose. 5-2 man
cabins. Designed for docking subs. Last drydock August 2007. Refurbished after off long term
charter, but in need of overhaul to engines & drives. U.S. Northeast. Prompt.
www.marcon.com
79
18.00' loaded draft. Built in 1973 by Southern Shipbuilding. U.S. flag. GRT: 173. Class: Ex ABS.
Now loadline only. Last drydock November 2008. FO: 112,450g. FW: 10,370g. Crane: 1,250lb.
Winch: Markey double drum. Main Engines: 2 x EMD 16-645E6 total 3,900BHP. 2 - 4 blade
prop(s). Genset(s): 2 - 148BHP / John Deere 6068T. Quarters: 6. Upper pilot house. Minimum
air draft 60'. H-bitt forward. Readily inspectable. All certificates & inspections up to date.
Reportedly excellent condition. U.S. East Coast. Prompt.
File: TG39121 Tug - Twin Screw - 120.0' loa x 29.2' beam x 11.0' depth. Built in 1964 by Burton
Construction; Port Arthur, TX. U.S. flag. GRT: 197. Class: ABS Loadline allowed to Lapse. 28'x27' clear
deck. FO: 38,000g. FW: 8,000g. Winch: Markey single drum. Wire Capacity: 1,800' x 1 5/8”. Main
Engines: 2 x EMD 16-567D total 3,900BHP. Originally powered with EMD12-567Cs. on
170gphGenset(s): 2 - 60kW / GM6-71 Delco 120/240v 60Hz. Firefighting: Full USCG lifesaving &
firefighting equipment. Quarters: 10 berths in 4 cabins. Air Conditioned. Galley. Copy of April 2009 survey
available on request. Vessel reportedly in good condition for her age. U.S. Gulf Coast.
Built in 1967 by Burton Shipyard; Port Arthur, TX. Rebuilt: 1987. U.S. flag. GRT: 193. ABS
International Loadline. Annual Survey 2 due 28 Feb 2013. Renewal due 29 Feb 2016. FO:
92,800g. FW: 2,500g. Winch: Smatco 62-DADT-200 single drum / GM8V-71. Line Pull:
120,000lb. Wire Capacity: 2,600' x 2.25”. Main Engines: 2 x EMD 16-645E2 total 3,900BHP. FP
80” x 67” prop(s) on 9” shaft(s). Repowered 1987. Bollard Pull: 38ST. on 4,200gpd. Genset(s): 1
- 70kW / John Deere;1 - 100kW / John Deere 60Hz AC. Air Conditioned. Galley. Hydraulic tow
pins. Pendant drum with 690' x 2.25” wire. Originally built to ABS Class. U.S. Gulf Coast.
18.10' loaded draft. Built in 1972 by Adelaide Shipyard; Australia. Canada flag. GRT: 585. Class:
Lloyds + 100 A1 towing, LMC. Light Disp.: 649mt. FO: 276T. FW: 22T. Winch: Double drum
Burrard. HJ-D (Anchor/tow). Wire Capacity: 2400' -2 1/4”. Main Engines: 2 x EMD 16-645 total
3,900BHP. Last Overhauled: 2003. CP prop(s). Kort nozzle(s). 07/03 Installed Factory rebuilds /
zero hours. Range - 8,000nm. Bowthruster 1.74T. Bollard Pull: 55MT. Speed about 13.5kn.
Genset(s): 1 - 200kW / Paxman, 1 - 200kW / GM 8V-92, 1 - 15kW AC. Firefighting: 2 dual
water/foam monitors, 5,400gpm / 8,100gpm. Quarters: 14 berths/10 cabins. Air Conditioned.
Galley. Towmaster rudder nozzle system. Working. Reportedly excellent condition and underwent
full class inspection, including underwater & main engines, winter 2000. Full conversion of the
power source from DC to AC. Upper pilot house installed. Bludworth linkage system. Available only with 13,390dwt, double-hull,
clean ocean tank barge TB85379. On charter but call if serious interest. Canada Great Lakes.
14.50' loaded draft. Built in 1981 by Edward Sanchez; Fall River, MA. U.S. flag. GRT: 197. Class:
ABS + A1 Towing Service. ABS valid until May 2016. FO: 77,000g. FW: 6,898g. BW: 49,450g.
Winch: Almon Johnson Type 22 / GM4-71 powered. Wire Capacity: 2,400' x 2”. Main Engines: 2 x
Alco 12-251C total 3,800BHP. Last Overhaul: 2002. FP 116” x 80” props on 10.75” shafts. Turbo
charged. Bollard Pull: 52.3st. Genset(s): 2 - 75kW / GM6-71. Reportedly heavily built. Raised pilot
house (height of eye 45'). Maximum air draft 64'. Condition fair. Certs on file. U.S. Northwest.
Built in 2007 by ST Shipbuilding Co; Malaysia. Mexico flag. GRT: 296. Class: BV - Ocean. FO:
64,250g. FW: 8,624g. BW: 24T. Winch: Single drum tow with auto spool. Line Pull: 40T. Stern
Roller. Main Engines: 2 x Cummins KTA-50-M2 total 3,600BHP. 4 blade Mag / Bronze prop(s) on
7.5” S/S shaft(s). Kort nozzle(s). Bollard Pull: 42ST. Speed about 11kn on 125gph. Genset(s): 2 125kW / Cummins 6CTA8.3 415v 3ph; 1 - 32kW 415v 3ph. Quarters: 2 single, 5 double. Air
Conditioned. Galley. Raised foc'stle. Mexico East Coast.
12.30' loaded draft. Built in 1966 by McDermott SY. U.S. flag. GRT: 199. Class: ABS + A1,
AMS, All Ocean Towing. Loadline not renewed. Deadweight: 446T. FO: 112,000g. FW: 1,795g.
Winch: Double drum Markey TDSD-32. Line Pull: 135,000lb. Wire Capacity: 2,200' 2”. Stern
Roller. Main Engines: 2 x EMD 16-645E6 total 3,600BHP. EMD16-567CB blocks. Both gear
boxes rebuilt. Several power pack repl. Bollard Pull: 39.5T. Speed about 12-14kn free on
2,880gpd. Genset(s): 2 - 99kW / GM8V71 (one needs to be rebuilt.). Quarters: 11 in 7 cabins.
Air Conditioned. Vessel drydocked, with hull and machinery class items updated 11/00. Sold to
present owners by Marcon. U.S. Southeast.
www.marcon.com
80
File: TG40162 Tug - Single Screw - 151.4' loa x 37.2' beam x 20.1' depth x 18.45' light draft x 23.30'
loaded draft. Built in 1971 by F. Schichau. Marshall Islands flag. GRT: 859. GL + ICOA4E Tug + MC
AUT-16/24. Ice strengthened. FO: 746m3. FW: 56m3. Derrick: 1-3T SWL. Winch: Suerken Double Drum
SW 20/2. 50T tow hook. Line Pull: 150T. Wire Capacity: 1500m x 46mm. Main Engines: 2 x MAK
8MU452AK total 3,600BHP. FP prop. Kort nozzle. 4T/day consumption economic free towing. Cruising
range 18,000nm. Bowthruster 250BHP. Bollard Pull: 55T. Speed about 11.6kn on 8Tpd towing. Pump(s):
Portable salvage pumps total 400m3/h. Genset(s): 1 - 210kVA / MWM 380vAC 50Hz; 2 - 210kVA / Deutz.
FIFI -180m3/h pump. Water/foam monitor. Quarters: 19 in 1-2 man rooms. Europe. Prompt.
Built in 2011 by Shin Yang Shipyard Sdn Bhd; Miri. Malaysia flag. GRT: 476. Nippon Kaiji
Kyokai NS *(AHV/TV)/MNS, MPP, LSA,RCF,AFS. Docking due 08/2014. Tail shafts & Special
due 08/2016. Deadweight: 350mt. 10m x 10m clear deck. FO: 280m3. FW: 80m3. Winch:
Double drum 150T brake, 5T tugger. Line Pull: 60T. Stern Roller. Main Engines: 2 x Cummins
KTA-50-M2 total 3,600BHP. 4.65m FP 4-blade prop(s). Kort nozzle(s). Joystick at fore & aft
engine controls. Bowthruster 3.5T. Bollard Pull: 47.48T. Speed about 12.2kn max on 11T/day
MDO. Pump(s): FO/BW/Bilge: 36m3/h each. Genset(s): 2 - 150kW / Cummins 6CTA8.3
415vAC 50Hz. Firefighting: FiFi 1/2. Quarters: 14 (2-2, 2-1, 2-4). Galley. Conan Wu design
37m offshore AHT. 100T shark jaw and tow pins. Mooring drum capacity 100m x 72mm. Wood
sheathed cargo deck. Southeast Asia.
File: SU20034 / SU20035 Supply Boats - AHTS (2 each) - 200.0' loa x 38.0' beam x 15.0' depth x 13.18' loaded draft. Built in 1979
by Yokohama Zosen; Chiba, Japan. Belize flag. GRT: 836. Class: ABS A1, AMS (exp.). Deadweight: 1,130T. 121' x 30' clear deck.
Hold Capacity: 190T in 3 holds. FO: 788.5T. Crane: 1 - 8T. Main Engines: 2 x Yanmar 6Z-ET total 3,520BHP. 2 - FP prop(s).
Bowthruster Water jet. Speed about 13kn. Genset(s): 3 - 200kW 440v 60Hz; 1 - 50kW 440v 60Hz. Firefighting: Fitted. Laid up. For
sale out of competition on a strictly “as is, where is” basis. Africa West Coast.
File: SU18602 Supply Boat - AHTS - 186.0' loa x 43.0' beam x 15.9' depth x 10.10' light
draft x 13.20' loaded draft. Built in 1977 by Taiwan Shipping Corp; Taiwan. India flag.
GRT: 992. Class: IRS - Indian Register of Shipping. Deadweight: 1,142T. Deck Cargo:
600mt on 28m x 10.5m clear deck. FO: 851m3. FW: 168m3. DW: 885m3. Dry Bulk:
6,000ft3. Derrick/A-Frame: 1 - 8T. Winch: 200T brake Hatlapa double drum waterfall. 2 6T tuggers. Line Pull: 75mt. Wire Capacity: 800m x 48mm. Stern Roller. Main Engines: 2
x Deutz SBA12M528 total 3,500BHP. Fixed prop(s). Kort nozzle(s). New GM12V71
thruster engine in 12/96. Bowthruster 400BHP. Bollard Pull: 45mt. Speed about 10-12kn
on 5.8-13.3Tpd. Pump(s): FW: 80m3/h, FO: 65m3/h, DW: 110m3/h, Bulk: 25Tph. Genset(s): 2 - 220kW / Deutz, 1- 435kVA /
Cummins KTA19GS. Firefighting: 2 - 125m3/h @ 93m head monitors. Quarters: 12 crew berths. Air Conditioned. Galley.
Passengers: 12 berths. Multi-purpose OSV. Winch fitted with 2.5” chain wildcats & capable of fitting 3” wildcats. 5,382ft3 rig chain
lockers fitted. Cooper Pegler anti-pollution control system. Southwest Asia.
File: TG34082 Tug - Tractor - 96.8' loa x 36.1' beam x 13.1' depth x 8.20' loaded draft. Built in
1997 by Astilleros Zamakona SA; Spain. Foreign flag. GRT: 335. Class: BV 1 + Hull, MACH, Tug
Sheltered Area + AUT, UMS. FO: 115MT. Winch: Brattvaag single drum + tow hook. Line Pull:
80T. Main Engines: 2 x CAT 3516TA total 3,480BHP. Voith Schneider 26GII/165 prop(s). Bollard
Pull: 35T. Speed about 12kn. Genset(s): 2 - 85kW / CAT 3304B 380vAC 50Hz. Firefighting: Two
monitors total 800m3/h & water spray around house. Quarters: 4-1 berth. Galley. Fitted for oil
spill recovery. Europe.
File: TG35129 Tug - Twin Screw - 141.0' loa x 34.1' beam x 20.1' depth x 16.50'
loaded draft. Built in 1966 by Dominion Steel. Rebuilt: 2009. Canada flag. GRT:
565. FO: 83,925g. FW: 7,500g. BW: 10,563g. Winch: J. Swan Single Drum. 3-12”
tow pins. Wire Capacity: 3000' 2 1/4”. Stern Roller. Main Engines: 2 x Stork
Werkspoor total 3,470BHP. 101”x 70.7” prop(s). Oil 4SA 8cyl 390x680. Open
wheel. Bollard Pull: 37.5T. Speed about 12kn. Genset(s): 2 - 120kW 460vAC
60Hz. Quarters: 10 men. ITB tug partnered with DB30033 heavy lift barge
converted from Ro-Ro ship. 1,000mt bow ramp. Can operate in both Ro-Ro & LoLo configurations. Canada Great Lakes.
Built in 2007 by SL Shipbuilding; Sibu, Malaysia. U.S. flag. GRT: 296. Class: BV 1. FO: 211MT.
FW: 32MT. BW: 50m3. Winch: Single drum. Line Pull: 40T. Main Engines: 2 x Cummins
KTA50M2 total 3,246BHP. FP prop(s). Kort nozzle(s). Bollard Pull: 40T. Speed about 11kn free
on 9Tpd. Genset(s): Cummins 6CTAB. Africa West Coast.
www.marcon.com
81
File: TG32044 Tug - Twin Screw - 100.1' loa x 29.5' beam x 13.9' depth. Built in 2009 by Nantong
Huigang Shipbuilding. Singapore flag. GRT: 262. Class: ABS + A1, Tow vessel (E) + AMS. Deadweight:
203mt. FO: 185MT. Main Engines: 2 x Cummins KTA50M2 total 3,244BHP. 2 - FP prop(s). Bollard Pull:
45T. Genset(s): 2 -99kW AC. Mid East.
File: TG32039 Tug - Azimuthing - 127.9' loa x 31.2' beam x 14.8' depth x 11.50' loaded draft.
Built in 1981 by Teraoka Shipyard; Minamiawaji, Japan. Foreign flag. GRT: 465. Class: ABS + A1
Towing Service + AME Unrestricted Service. 80m2 clear deck. FO: 333.4m3. FW: 83.6m3.
Crane: Palfinger 3T @ 7.5m 24m boom. Winch: Double drum waterfall / CAT 3306T + capstan.
Line Pull: 50T@12m/mi. Wire Capacity: 1,000m/150m 37.5mm. Main Engines: 2 x Yanmar 6ZLUT total 3,200BHP. FP prop(s). Bowthruster. Bollard Pull: 40T. Speed about 11.5kn. Genset(s): 2
- 125kW / CAT 3306 & 1 - 52kW AC. Quarters: 16 persons. Offers invited. Mid East. Prompt.
Built in 2006 by Wuhu Dajiang Shipyard. Singapore flag. GRT: 248. Class: ABS + A1 + AMS
Circle E SOLAS BKI. FO: 130MT. FW: 25MT. Winch: 1 - 300kN, 80kN w/ 100T brake; 1 - 40T
towhook. Wire Capacity: 700m x 44mm. Main Engines: 2 x Cummins 50 KTAM2 total
3,200BHP. 2 - FP prop(s). Kort nozzle(s). Bollard Pull: 40T. Speed about 12k free. Genset(s): 2
- 99kW Stamford / Cummins 6CT8.3 - D(M) 380v 3ph 50HZ. Quarters: 12 in 6 cabins. Air
Conditioned. Sale strictly “as is, where is” subject to Owner's Board of Directors approval. To be
sold en-bloc with 371' x 92' x 22 ocean deck barge. Mid East.
Built in 2006 by Wuhu Dajiang Shipyard. Indonesia flag. GRT: 248. Class: ABS + A1 + AMS
Circle E SOLAS BKI. FO: 130MT. FW: 25MT. Winch: 1 - 300kN, 80kN w/ 100T brake; 1 - 40T
towhook. Wire Capacity: 700m x 44mm. Main Engines: 2 x Cummins 50 KTAM2 total 3,200BHP.
2 - FP prop(s). Kort nozzle(s). Bollard Pull: 40T. Speed about 12k free. Genset(s): 2 - 99kW
Stamford / Cummins 6CT8.3 - D(M) 380v 3ph 50HZ. 12 in 6 cabins. Southeast Asia.
in 1973 by Towa Shimonoseki; Japan. India flag. GRT: 269. Class: IRS. Deadweight: 177mt. FO:
75mt. FW: 25mt. Winch: Single drum hydraulic tow, quick release hook & 1-2T capstan. Wire
Capacity: 500m x 38mm. Main Engines: 2 x Hanshin 6LUD32 total 3,200BHP. CP Steerable
Nozzles prop(s). Kort nozzle(s). Bollard Pull: 33mt. Speed about 10kn free. Pump(s): 2 - 240/540
m3/h fire pumps. Genset(s): 2 - 93kVA / Yanmar 440v 50Hz. Quarters: 12 berths. Air Conditioned.
Galley. Berthing, unberthing & ocean towing tug. Southwest Asia. Prompt.
File: TG32176 / TG32177 Tugs - Twin Screw (2 each) - 105.0' loa x 29.5' beam x 13.1'
depth x 10.80' loaded draft. Built in 1975 by Matsuura Tekko Zosen, Japan. Malaysia flag.
GRT: 286. Class: BV I Tug, Unrestricted Navigation. Deadweight: 192mt. FO: 168T. FW:
40T. Winch: Skagit single drum 100T brake. Line Pull: 12T. Wire Capacity: 600m x 44mm.
Main Engines: 2 x Fuji 6M275FH total 3,200BHP. 2 - CP prop(s). Kort nozzle(s). Bollard Pull:
37MT. Speed about 11kn on 6.5Tpd. Genset(s): 2 - 60kW / Yanmar 4KDL 445vAC 60Hz.
Quarters: 14 crew. Southeast Asia. Prompt.
File: TG32180 Tug - Twin Screw - 113.2' loa x 31.2' beam x 15.1' depth. Built in 2012 in China.
Foreign flag. GRT: 321. Class: BV. FO: 278m3. FW: 62m3. Main Engines: 2 x total 3,200BHP.
Bollard Pull: 40MT. Air Conditioned. Galley. Passengers: 12. Newly built 34.5m 3,200BHP twin
screw tug available prompt ex-China yard. Far East. Prompt.
draft. Built in 2008 by Hung Seng Shipbuilding; Malaysia. Singapore flag. GRT: 299. Class:
NKK. Deadweight: 236mt. FO: 232T. FW: 22T. Winch: 40/10T - 70HP; 1 - 40T tow hook.
Main Engines: 2 x Cummins KTA50M2 total 3,200BHP. 2 - FP prop(s). Speed about 12kn.
Genset(s): 2 - 100kW / Cummins 6BT5.9-D; 1 - 25kW / Yamaha. Air Conditioned. Available
en-bloc with 330' deck barge DB33074. Both reported in very good condition. Marcon sold
three similar tugs from this owner early 2011 as sole broker. Southeast Asia.
www.marcon.com
82
File: TG32198 / TG32199 Tugs - Twin Screw (2 each) - 105.3' loa x 29.5' beam x 13.8' depth x
11.80' loaded draft. Built in 2008 by Tang Tiew Hee. Singapore flag. Class: NKK. Deadweight:
212mt. FO: 236T. FW: 22T. BW: 31T. Winch: 40/10T - 70HP; 1 - 40T tow hook. Main Engines: 2 x
Cummins KTA50M2 total 3,200BHP. 2 - FP prop(s). Speed about 12kn. Genset(s): 2 - 100kW /
Cummins 6BT5.9-D; 1 - 25kW / Yamaha. En-bloc with 10,000 DWT deck barge DB33073. Marcon
sold three similar tugs from this owner early 2011 as sole broker. Southeast Asia.
2009 by Jiangsu Sentsa Marine; Yizheng JS. Singapore flag. GRT: 486. Class: BV, I Tug. FO: 338MT.
Main Engines: 2 x Cummins KTA-50-M2 total 3,200BHP. 2 - FP prop(s). Bollard Pull: 40T. Speed
about 12kn. Genset(s): 2 - 90kW 415vAC 50Hz. Southeast Asia.
Built in 2009 by Sapor Shipbuilding Ind. Sdn Bhd. Singapore flag. GRT: 317. Class: GL +100A5
Tug. Deadweight: 285mt. Main Engines: 2 x Cummins KTA-50-M2 total 3,200BHP. 2 - FP
prop(s). Bollard Pull: 40T. Speed about 12kn. Southeast Asia.
Built in 2009 by Tianjin Junlian Marine Eng.; Tianj. Singapore flag. GRT: 365. Class: BV. Main Engines: 2 x Cummins KTA-50-M2
total 3,200BHP. 2 - FP prop(s). Bollard Pull: 40T. Speed about 12kn. Genset(s): 2 - 40kW 60Hz. Southeast Asia.
File: TG31105 Tug - Twin Screw - 105.0' loa x 30.0' beam x 14.5' depth x 9.00' light draft x 12.00' loaded draft. Built in 1977 by
Bollinger SY; Lockport, LA. U.S. flag. GRT: 179. Class: ABS + A1 Towing. ABS Loadline. FO: 65,000g. FW: 20,000g. Winch:
Intercon DD-200 double drum; GM6-71 power. Line Pull: 190,000lb. Wire Capacity: 2,000' x 2”. Stern Roller. Main Engines: 2 x CAT
3516TA total 3,100BHP. 87” x 90.5” prop(s). Kort nozzle(s). Repowered 1985 - 2 years warranty left. Speed about 12kn free.
Genset(s): 2 - 75kW / GM6-71. Quarters: 11 berths in 4 cabins. Air Conditioned. Galley. Standard bow. Owner will consider a sale or
long term charter. U.S. Gulf Coast.
File: TG30209 Tug - Single Screw - 101.7' loa x 29.5' beam x 15.2' depth x 14.10' light draft x
12.60' loaded draft. Built in 1974 by Ast. de Tarragona; Tarragona, Spain. GRT: 276. Class: BV 1
+Mach Tug Unrestricted Nav., Special Survey due Jan 31, 2014. Deadweight: 207T. FO: 134m3.
Crane: 9T Hyd. Crane (2T @ 10m). Winch: Towing Winch. 60T Tow Hook. Line Pull: 164T brake.
Wire Capacity: 700m x 48mm. Main Engine: 1 x Deutz RVB8M358 total 3,040BHP. 1 -Steering CP
prop(s). Kort nozzle(s). Bollard Pull: 41T. Speed about 13kn max. Pump(s): Salvage; 2 - FiFi
pumps. Genset(s): 2 - 165kVA 380v 50Hz AC; 1 - 65kVA 380v 50Hz AC.: 4 - FiFi monitors.
Quarters: 8 in 5 cabins. Owner reports “yacht” like condition. Ocean nav. & com equipment. Linehaul / long range tug. Caribbean. Prompt.
File: SU16000 Supply Boat - AHTS - 160.1' loa x 39.2' beam x 15.9' depth x 14.00' l
draft. Built 1969 by A.B. Rea SB., Australia. GRT: 397. Class: Turk Loydu. Deadweight:
747T. Deck Cargo: 400T on 285.74m2 clear deck. FO: 91,280g. FW: 37,400g. DW:
95,700g. Dry Bulk: 1,950ft3 in 3 tanks. Crane: 1 - 12T Hydraulic. Winch: SMATCO
double drum hyd. Line Pull: 225,000lb. Wire Capacity: 400/600m 52m. Stern Roller.
Main Engines: 2 x EMD 12-645 total 3,000BHP. Fixed 4 bl. 90” prop(s). Kort nozzle(s).
Kort nozzle rudders. Main & Aux Engines Reconditioned 07/05. Bowthruster 150BHP.
Bollard Pull: 43MT. Speed about 13kn max on 6m3/day. Pump(s): FO: 360gpm @ 150',
DW: 577gpm @ 150'. Genset(s): 2 - 135kW, 1 - 30kW 415vAC. 90g/min @ 60' fire
pump. Quarters: 22 incl. 12 crew. Mediterranean. Prompt.
File: SU18050 Supply Boat - AHTS - 180.0' loa x 38.0' beam x 14.0' depth x 12.10' loaded draft. Built in 1974 by Halter Marine,
USA. U.A.E. flag. GRT: 674. Class: ABS + A1 + Towing Service, +AMS (exp. 30 Sept 2011). Deadweight: 1,030mt. Deck Cargo:
158MT on 2,800ft2 clear deck. FO: 78,085g. FW: 14,175g. DW: 69,090g. BW: 138,417g. Dry Bulk: 3,600ft3 in 4 tanks. Winch:
Smatco 66 DAW 2000. Line Pull: 136mt. Wire Capacity: 200m44mm/130 38mm. Main Engines: 2 x EMD 12-645E2 total 3,000BHP.
2 - 4 blade Fixed prop(s). Bowthruster 2.7T,. Bollard Pull: 27MT. Speed about 10/12kn on 2112-3288gpf. Pump(s): LO: 80m3/hr
total. Genset(s): 2 @ 99kW/GM6-71 480vAC 3ph 60Hz. Firefighting: 2-227m3/h monitors. 340m3/h pump. Quarters: 11 berths. Air
Conditioned. Galley. Passengers: 23 berths. Call for price guidance. Vessel has been working as a dedicated lube oil (750m3)
carrier for oil major. Mid East. Prompt.
File: SU18005 Supply Boat - AHTS - 180.0' loa x 38.0' beam x 14.0' depth. Built in 1977. Venezuela flag. Deadweight: 818T. Light
Disp.: 641T. 100' x 30' clear deck. Liq. Mud: 1,381BBL. Main Engines: 2 x EMD 12-645E7B total 3,000BHP. Firefighting: Fitted.
Quarters: 15. For sale only out of competition and strictly “as is, where is”. U.S. Gulf Coast.
www.marcon.com
83
File: TG30221 Tug - Azimuthing - 93.0' loa x 34.0' beam x 12.5' depth x 18.00' loaded draft. Built
in 1982 by Valley Shipbldg, TX. Netherlands flag. GRT: 272. Class: ABS + A1 Towing Service +
AMS + ACCU, Unrestricted Service. FO: 222,500L. FW: 20,000L. Winch: Intercon SP150 68MT
brake. Line Pull: 27T. Wire Capacity: 500m x 48mm / 250m x 48mm. Main Engines: 2 x EMD 12645-E6 total 3,000BHP. Niigata 3A Z-peller prop(s). Bollard Pull: 45T. Speed about 8kn on 120gph.
Genset(s): 2 - 90kW / GM 6-71 440vAC 60Hz. Firefighting: 1,000gpm Aurora fire pumps. Halon
system. Quarters: 5. Forward mount azimuthing units with skeg aft. Equipped as harbor tug,
although previously worked coastal and offshore under previous ownership. Europe.
by Halter Marine, Pierre Port, LA. U.S. flag. GRT: 180. Class: ABS Loadline (5yr SS done April 2010 / Exp.
04/06/2015). FO: 50,000g. FW: 5,000g. Winch: Intercon (74073) single drum / GM6-71 power. Line Pull:
80,000lbs. Wire Capacity: 2,600' x 1.75”. Main Engines: 2 x Cummins KTA50M2 total 3,000BHP. 91” x 89”
4 blade skewed prop(s) on 8.5” shaft(s). Kort nozzle(s). 10/04 Repowered with “Tier 1” diesels. Bollard Pull:
45ST. Genset(s): 2 - 90kW / Power Tech 480vAC 60Hz. Air Conditioned. Galley. ITC 387G / 116N. Foc'stle
bow. Quad rudders installed in 2004. New engine & reduction gear foundations, shafts and props, and a lot
of new steel work. 5yr Dry-docking & special survey for ABS Loadline done April 2010. U.S. West Coast.
File: TG30037 Tug - Twin Screw - 103.0' loa x 27.0' beam x 12.00' loaded draft. Built in 1966 by
Lockport, LA. U.S. flag. GRT: 149. FO: 27,630g. FW: 17,940g. BW: 8,284g. Winch: None. “H” bitt and
Pelican hook. Main Engines: 2 x EMD 12-645CE2 total 3,000BHP. 4 - blade 96” fixed prop(s). 1996 EMD
(12 cylinder) as of 8/11 est. 12K hrs. Bollard Pull: est. 28T. on 150gphGenset(s): 2 - GM-471; Shore power
connection. Firefighting: 2 Monitors on 02 deck forward; GM 8V92 diesel driven pump in forepeak.
Quarters: 2-2, 1-1 berth cabins. Air Conditioned. Galley. Harbor tug. “H” bitt & staple forward. Type II Red
Fox Marine Sanitation Device. Copy of April 2009 survey available on request. Good condition for her age.
Repowered and geared 1996. U.S. Gulf Coast.
1980 by Valley Shipbuilding; Brownsville TX. Netherlands flag. GRT: 272. Class: ABS +A1 Towing
Service, ACCU + AMS, Unrestricted Service thru Jan 2013. Deadweight: 337mt. FO: 222,500L. FW:
20,000L. Winch: Intercon SD150, 68T brake. Line Pull: 27T. Wire Capacity: 500m x 48mm. Main
Engines: 2 x EMD 12-645E6 total 3,000BHP. 2 - Z-Peller Forward prop(s). Bollard Pull: 45T. Speed
about 11.5kn max. Genset(s): 2 - 99kW / GM 6-71 440vAC 60Hz. Quarters: 3 cabins. Air Conditioned.
Tractor tug with 360 deg. azimuthing props, located forward of midships with skeg aft. Designed for ship
docking and coastal towing. “As is, where is”. Europe. Prompt.
1976 by Main Iron Works; Bayou Blue, LA. U.S. flag. GRT: 109. Class: ABS Loadline (renewed 5yr in
2010, exp. June 29, 2015). Deadweight: 434T. FO: 110,000g. Crane: 1 - 200lb Daybrook. Winch:
Intercon Double Drum. Wire Capacity: 2,200' x 2”. Main Engines: 2 x EMD 12-645E6 total 3,000BHP. 2 FP prop(s). Kort nozzle(s). Genset(s): 2 - 90kW / GM6-71 220vAC 3ph 60Hz. Quarters: 6. Galley. High
foc’stle bow. Working, but may develop against serious non-competing interests. U.S. Northwest.
File: TG30180 Tug - Twin Screw - 90.0' loa x 28.0' beam x 15.0' depth x 10.80' light draft x 12.00' loaded
draft. Built in 1975 by Main Iron Works; Morgan City, LA. Rebuilt: 2004. U.S. flag. GRT: 152. Class: ABS +
A1 + AMS Towing Service, +AMS. ABS Loadline. FO: 26,000g. FW: 4,000g. Main Engines: 2 x EMD 12645 -E2 total 3,000BHP. 2 - 92” x 68” FP 4 -blade prop(s). Kort nozzle(s). 08/03 - 16,760hr on ea since
1993 OH. Bollard Pull: 44mt. Speed about 11kn free. Pump(s): 2,190 gpm fire pump. Genset(s): 2 - 75kW /
DD 6-71 480v 60Hz. Firefighting: 1 fire monitor. Quarters: 6. Harbor tug. 45' highest fixed point. Height of
eye is 18' 5”. Rebuilt 2004. 40HP stern capstan for hawser towing with soft line. H bitt at stern. U.S. Gulf Coast. Prompt.
File: TG30189 Tug - Twin Screw - 106.0' x 28.5' x 14.2' depth. Built in 1960 by Albina Eng. & Mach.,
Portland. U.S. flag. GRT: 195. ABS loadline renewed June ‘09 / exp. June 4, 2014. FO: 75,000g. FW:
5,700g. Winch: Electric Almon Johnson Double Drum with gypsies. Wire Capacity: 1,700' x 2”; 2,100'
x.75”. Main Engines: 2 x EMD 12-645E2 total 3,000BHP. FP 106”x92” 4-blade inboard turning props on
8” stainless shafts. 2010: MEs rated Tier 2 EPA and “zeroed out” 11/12 PME-8,599hrs/SME-8,553hrs.
Bollard Pull: 38.5ST. Genset(s): 2-75kW Lima/John Deere new 2010-Tier 2 480vAC 60Hz. 4 cabins.
Repowered & rebuilt late 1980s plus new pilot house. 3 hydraulic tow pins. Rubber bow pud & “D”
fendering. Walk-in freezer & cooler. Owner adapted electronic system for EPA & now certified Tier 2 emissions rating. U.S. West
Coast.
www.marcon.com
84
Built in 1965 by Erieau SB & DD; Ontario, Canada. Canada flag. GRT: 194. Class: LR + 100A1
Tug + LMC (lapsed) Ice Class II. FO: 78.96T. FW: 12T. Winch: Single Drum. Wire Capacity:
2,000' x 1.5”. Main Engines: 2 x Paxman total 2,920BHP. Vee oil 4SA 8 Cyl 248x267mm. Bollard
Pull: 44T. Speed about 15km. Genset(s): 2 - 25kW 230/115v DC. Quarters: 9 total. Coastal &
harbor tug. Tow hook. Canada East Coast. Prompt.
draft. Built in 1982 by Dricon Scheepsconstructie; Holland. Colombia flag. GRT: 184. Class:
BV I 3/3 E Tug Deep Sea (disc. 6/2006) Last DD April 2011. Deadweight: 341T. Light Disp.:
210mt. Deck Cargo: 50mt on FO: 17,000g. FW: 70MT. Winch: No tow winch. 1 - 4T
capstan. Main Engines: 2 x MWM TBD603T16 total 2,900BHP. Last Overhauled: 2009.
Fixed pitch prop(s). Kort nozzle(s). Bollard Pull: 35T. Speed about 10kn cruise on 56gph.
Pump(s): 400m3/h fire pump. Genset(s): 2 - 50kVA / GM3-71 220vAC 60Hz 3ph consuming
abt. 1gph. Firefighting: Foam: 12m3 Two Skum Mk.15 Foam / Water Fire Monitors.
Quarters: Total 13. Air Conditioned. Galley. Coastwise / harbor tug. Caribbean.
draft. Built in 1990 by Jurong Shipyard; Singapore. GRT: 741. Class: ABS A1 Towing
Vessel, AMS. (Formerly RS KM+1, 1[1]A2 Tug Icebreaking Ice Class 1 which can be
reinstated). Deadweight: 232mt. 24.6' x 26.2' clear deck. FO: 263m3. FW: 35m3. Crane:
Hiab 60 3,400kg @ 1.7m. Derrick/A-Frame: 90T. Winch: Norwinch single drum hydraulic +
Mampaey quick release towhook. Line Pull: 30MT. Wire Capacity: 550m 52mm +spare.
Stern Roller. Main Engines: 2 x Yanmar T260ST total 2,840BHP. Last Overhauled: 2009. 4
blade 2,300mm Fixed Pitch prop(s). Kort nozzle(s). oil 4SA 6cyl. 250x330mm. Endurance
8,000nm@10kn. Bowthruster 300BHP. Bollard Pull: 41T. Speed abt. 13.0kn on 4-8MT/d. Genset(s): 2 - 200kW; 2 - 100kW 380vAC
50Hz 3ph. Quarters: 28 in 16 cabins. Both main & auxiliary engines were fully overhauled by in October 2009. For sale or charter
with 200 man accommodations work barge MB20053. Try individual basis. Caspian Sea. Prompt.
Built in 1975 by Halter Marine; Pierre Pt., LA. U.S. flag. GRT: 173. Class: ABS Loadline - exp.
May 31, 2012 (formerly ABS + A1 Class). Winch: Intercon Double drum / GM4-71. Wire
Capacity: 2000' x 2”. Main Engines: 2 x CAT 3516 total 2,820BHP. 2 - FP / 4 blade stainless
prop(s). New M/Es '96. New tail shafts 05/00. Genset(s): 2 - 99kW / GM6-71. Quarters: 6 cabins
/ 8 berths. Air Conditioned. Galley. Fitted with upper pilothouse. 60' highest fixed point.
Reportedly in excellent condition. Laid up. U.S. Gulf Coast.
in 1975 by Bollinger Machine Shop; Lockport LA. U.S. flag. GRT: 183. Class: ABS Loadline only (exp.
April 2014). FO: 66,070g. FW: 10,000g. Winch: Intercon DD-175D Double drum. Dutch Bar. Line Pull:
145ST max. Wire Capacity: 2,000' x 2.25”. Stern Roller. Main Engines: 2 x CAT 3516 total 2,820BHP.
FP 4 blade 100” dia. prop(s). Speed about 8.5-10kn on 80-95gph. Genset(s): 2 - 75kW. Quarters: 10
Crew in 5 Cabins. Upper pilot house. Solid rubber fendering. Laid up. U.S. Gulf Coast.
File: TG22122 Tug - Single Screw - 121.4' loa x 32.0' beam x 16.5' depth x 13.00'
light draft x 15.40' loaded draft. Built in 1965 by Paceco; Alameda, CA. U.S. flag.
GRT: 199. ABS International Loadline. FO: 115,000g. FW: 18,000g. Winch: AlmonJohnson Single Drum 229 single drum hydraulic. Line Pull: 80,000lb. Wire Capacity:
2100' x 2”. Main Engine: 1 x EMD 16-645D5 total 2,800BHP. Last Overhauled: 1997.
5 blade 121.5” x 94-96' prop(s). Main engine repacked to 645s. Turbo-charged.
Bollard Pull: 30ST. Genset(s): 2 - 75kW / CATD 3306 120/208vAC 60Hz. Air
Conditioned. Galley. Wheelhouse height 23.4'. Ocean going. Reportedly good overall
condition, turnkey & ready to work. Keen to sell and will entertain serious cash offers. U.S. Gulf Coast. Prompt.
loaded draft. Built in 1975 by Universal Iron Wks.; Houma, LA. Rebuilt: 2008. U.S. flag. GRT: 125.
Class: ABS Loadline. 5 year DD and SS renewed May 2012. FO: 36,470g. FW: 6,632g. Crane: 5T
Pitman Hydraulic. Winch: Smatco (DPW-74). Line Pull: 150,000lb. Wire Capacity: 1,800' x 1.5”. Stern
Roller. Main Engines: 2 x Cummins QSK38 total 2,800BHP. 4 blade 75” x 72” props. Kort nozzles.
Repowered with new ME and new gears 2008 / Tier 2 compliant. Genset(s): 2 - 50kW / GM4-71.
Quarters: 7. Air Conditioned. 2 1/2 level deckhouse. Aft steering station. New Kort nozzles, 4 cutlass
bearings &1 new shaft all renewed Spring 2012. 45' height of eye. U.S. Northeast.
www.marcon.com
85
File: TG26101 Tug - Twin Screw - 100.0' x 25.0' x 11.3' depth x 11.00' light
x 14.00' loaded draft. Built in 1944 by Luders Marine; Stamford, CT. Rebuilt:
2008. U.S. flag. GRT: 143. FO: 52,000g. FW: 3,500g. Winch: Parkersburg
Single Drum with under-rider drum. Wire Capacity: 2,000' 2” / 800' 1.75”.
Main Engines: 2 x GM 16V149TI total 2,800BHP. 2 - FP 87” x 84” SS prop(s)
on 7.5” shaft(s). Main engines & gears completely rebuilt 2008. Genset(s): 2 75kW / GM 4-71. Rebuilt or low hour. Quarters: 10 berths. 47' highest fixed
point. 20' eye level. Upper house is aluminum; lower house steel. Marcon
sold to present owner. New switchboard, distribution panel. Ready to work.
Repowered & converted to twin screw in 1978. New tow wire, and pendant,
plus recent dry-docking and painting in 2012. U.S. Northwest.
File: TG28105 Tug - Single Screw - 104.3' x 31.5' x 16.4' depth x 13.30' loaded draft. Built in
1970 by Svendborg Shipyard; Denmark. Denmark flag. GRT: 291. Super Ice Class, World Wide
Trading. Deadweight: 189mt. 1 hatch: 4' x 6.9'. FO: 152MT. Crane: 1 - 7T Hydraulic. Winch:
Hydraulic Single Drum. Line Pull: 15MT. Main Engines: 2 x MAK 6M452AK total 2,800BHP. 1 CP prop. Bowthruster 225BHP. Bollard Pull: 40T. Speed about 13kn. Total salvage pumping
capacity @ 600Tph. Genset(s): 1 - 180kW; 1 - 150kW 380vAC 50Hz. Quarters: 8-9 cabins (2-2,
6-1 man). Galley. Deep-sea / Harbor Tug. Super Ice Classed. Reportedly can do some ice
breaking. Fitted for high sea towage. Brunvoll bow thruster installed October 2001. Baltic.
draft. Built in 1979 by Malaysia S/Y & Eng.; Pasir Gudang. Malaysia flag. GRT: 289.
Class: BV I Tug, Unrestricted Navigation. Last Special Survey 05/2006. FO: 168mt. FW:
40T. Winch: Kitagawa single drum 80T brake. Line Pull: 18T. Wire Capacity: 600m x
44mm. Main Engines: 2 x Yanmar 6Z-DT total 2,800BHP. Fixed pitch prop(s). Kort
nozzle(s). Bollard Pull: 33.8T. Speed about 11kn on 6.5Tpd. Genset(s): 2 - 88kW /
Yanmar 5KDL; 1 - 40kW / Yanmar 3KDL 420vAC 50Hz. Quarters: 12 crew. Working.
Southeast Asia. Prompt.
light draft x 15.50' loaded draft. Built in 1965 by Paceco, Alameda. Rebuilt: 2001. U.S.
flag. GRT: 143. Formerly ABS Classed & Loadline, but now under tonnage. FO:
100,000g. FW: 18,000g. Winch: Markey TYSD32 Double Drum. Wire Capacity: 2” x
2250'. Main Engine: 1 x EMD 16-567D5 total 2,800BHP. 1-FP 5 blade SS 121.5”x9496” prop(s) on 9” shaft(s). EMD645 Power Packs 2,200BHP @ 800RPM. Bowthruster
180BHP. Bollard Pull: 30ST. Genset(s): 2 - 60kW / CAT3306 (one replaced 2011)
120/240vAC 60Hz. Quarters: 9 berths in 5 cabins. Air Conditioned. Galley. Tow pins /
stern roller aft. New bowthruster 2007 and new CAT3306 powered genset installed, plus steel work done on house, under towing
winch. New bulwarks and various steel replaced aft. U.S. Northwest. Prompt.
File: TG28122 Tug - Twin Screw - 94.4' loa x 28.9' beam x 12.5' depth. Built in 1976 by Japanese Shipyard. Indonesia flag. GRT:
262. Class: BKI. FO: 92,778L. Main Engines: 2 x Yanmar total 2,800BHP. Speed about 13kn. Genset(s): 2 - 78kW. Quarters: 8 -10
persons. Galley. Far East.
File: TG31030 Tug - Twin Screw - 105.0' loa x 30.0' beam x 14.5' depth x 12.00' loaded draft. Built in 1981 by Bollinger Shipyard;
Lockport, LA. U.S. flag. GRT: 141. Class: ABS + A1 Towing. ABS Loadline. FO: 65,000g. FW: 15,200g. Winch: Intercon DD200
Double drum; GM6-71 power. Line Pull: 190,000lbs. Wire Capacity: 2,400' x 2”. Main Engines: 2 x CAT 3516 total 2,800BHP. 98” x
97” prop(s). Kort nozzle(s). Bollard Pull: 41T. Genset(s): 2 - 75kW / GM6-71. Quarters: 11 in 5 cabins. Air Conditioned. Galley.
Owner will consider a sale or long term charter. Contact Marcon for further details. U.S. Gulf Coast.
loaded draft. Built in 1971 by Bodewes Millingen - Netherlands. Denmark flag. GRT: 282.
Class: World Wide Trading. Deadweight: 138T. Winch: Brake force 60T max. Wire
Capacity: 650m 38mm. Main Engine: 1 x Deutz SBV6M358 total 2,750BHP. Kort
nozzle(s). Bowthruster 184kW. Bollard Pull: 30T. Speed about max 13.5kn. Pump(s): 1 180m3 @ 14 bar; 2 - 110m3 @ 10 bar fire pumps. Genset(s): 2 - 140kVA; 1 - 70kVA
380vAC 3ph 50Hz. Firefighting: 3 water / foam monitors (1 hyd / snorkel 22m above
water). Quarters: 6 persons. Baltic.
www.marcon.com
86
File: TG27294 Tug - Single Screw - 94.6' loa x 28.5' beam x 15.7' depth x 12.80' loaded draft. Built in 1992
by Astilleros Zamakona SA; Spain. Italy flag. GRT: 265. Class: RINA (formerly BV). Continuous Hull Survey
due 07/2012. Deadweight: 183mt. Deck Cargo: 50MT on 6m x 8m clear deck. FO: 152m3. FW: 43m3.
Crane: 1 - 4,000kg @ 2.0m. Winch: Single drum & tow hook. Wire Capacity: 800m x 44mm. Main Engine: 1
x Bergen KRMB-9 total 2,727BHP. Kamewa CP prop(s). Range: 16 days. Bowthruster 250BHP. Bollard
Pull: 43MT. Speed about 12-15kn. Genset(s): 2 - 100kVA / Guascor 50Hz 380v. Firefighting: 2 monitors.
Foam 6.7m3. 1 - 800m3/hr pump. Quarters: 2-1, 4-2 man. Air Conditioned. Galley. Passengers: 4.
Dispersant - 6.7m3. Not officially on the market, but we may be able to develop on a private & confidential
basis for an “as is, where is” sale. Vessel reportedly in good working condition and trading in spot market.
Marcon has sold about six or seven vessels to owner over last 15 years. Mediterranean.
File: TG27123 Tug - Twin Screw - 123.0' loa x 30.2' beam x 10.5' depth. Built in 1956 by Gulfport
Shipbuilding; TX. U.S. flag. GRT: 292. Class: Originally classed with ABS until 1980. Winch: Vertical capstan
aft. Main Engines: 2 x EMD 16-567C total 2,700BHP. FP prop(s). Abt. 3,600HP @ 900RPM. Repowered from
GM8-278s diesel electric. Genset(s): 2 - 100kW. Quarters: 6. Galley. Hawser tug used for ship assist work.
Available for sale, but may develop for long-term bareboat to qualified charterer. Keen seller. U.S. East Coast.
File: TG26070 Tug - Azimuthing - 93.5' loa x 29.8' beam x 16.0' depth x 11.97' loaded draft.
Built in 1984 by Sabah Shipyard; Malaysia. Rebuilt: 2007. Panama flag. GRT: 251. Class: LRS +
100A1 (disc). Last drydock July 2011. FO: 41.4m3. FW: 25.62m3. BW: 5.98m3. Winch: Hatlapa
single drum hydraulic. Line Pull: 80MT. Wire Capacity: 250m. Main Engines: 2 x Deutz
SBV6M628 total 2,682BHP. Last overhaul: 2007. Wartsila completed overhaul of M/Es in 2007.
Bollard Pull: 34T. Speed about 12kn on 6m3/day. Pump(s): 360m3/h @ 175psi external fire.
Genset(s): 2 - 68kW / Deutz F6L914 400vAC 3ph 50Hz. Firefighting: 2 - water/foam monitors
3,000Lpm. Harbor azimuthing tug with drives forward and skeg aft. Drydocked, blasted & painted
2007 when totally rebuilt including MEs, Schottel drives, Kolbelt controls, etc. South America East Coast.
File: TG26126 Tug - Single Screw - 108.0' x 30.0' x 16.07' draft. Built in 1977 by R. Dunston (Hessle) Ltd.;
U.K. Belize flag. GRT: 277. Class: Lloyds + 100 A1 Tug. Deadweight: 175T. 65m2 clear deck. FO: 148m3. FW:
12m3. Crane: 1 - 18MT / hyd. Winch: Donkin single drum hydraulic. Wire Capacity: 732m x 44mm. Main
Engine: 1 x Ruston 12RK3CM total 2,640BHP. 1 - 4 blade Berg CP prop(s). Kort nozzle(s). Bowthruster
320HP. Bollard Pull: 40.2MT. Speed about 13kn free. Pump(s): 1 - Dorman diesel 480HP salvage pump.
Genset(s): 3 - 127kW / Gardner 6LXB 440vAC 3ph 50Hz. Firefighting: 3 monitors. Quarters: 1 master, 4-1 & 12 berth. Deep sea towing tug reportedly good condition. Africa West Coast. September 2012.
File: TG26073 Tug - Twin Screw - 73.8' loa x 26.9' beam x 12.1' depth. Built in 2005 by Ge-Ta
Corp; Tuzla, Istanbul, Turkey. Turkey flag. GRT: 156. Class: BV I Tug. Unrestricted Navigation.
Deadweight: 277mt. FO: 65.5m3. FW: 13.8m3. Winch: Data single drum + tow hook. Wire
Capacity: 40mm x 450m. Main Engines: 2 x Cummins KTA38 total 2,600BHP. 2 - CP prop(s). Kort
nozzle(s). Range: 1,920nm. Bollard Pull: 40T. Speed about 12kn. Genset(s): 2 - 90kW /
Cummins. Firefighting: 1 - 300m3 pump; 1 - monitor. Quarters: 6 persons. Black Sea.
1982 by Penang Shipbldg. Corp; Malaysia. Malaysia flag. GRT: 209. Class: BV Unrestricted Navigation
through 16 April 2014. FO: 110MT. FW: 34MT. Winch: Single drum. Main Engines: 2 x Ruston
6AP230M total 2,580BHP. 2 - 3 blade CP prop(s). Kort nozzle(s). Bollard Pull: 33.8T. Speed about
12kn on 5Tpd. Genset(s): 2 - 64kW / MWM TD226-6. Quarters: 12 crew. Working. Periodically open for
employment or sale “as is, where is”. Southeast Asia.
draft. Built in 1981 by B.V. Scheepswerven v/h HH Bodewes. Foreign flag. GRT: 292.
Class: Ex-LR +100A1 +LMC. FO: 29.6m3. FW: 17.4m3. Winch: Tow winch. Main Engines:
2 x MAK 6M332AK total 2,574BHP. 2 - FP prop(s). Bollard Pull: 30T. Speed about 12kn
on 132Lph. Quarters: 14. Operational. Caribbean.
File: TG25097 Tug - Twin Screw - 97.0' x 29.6' x 11.2' x 12.00' draft. Built in 1964 by Main Iron Works; Houma, LA.
Rebuilt: 2001. U.S. flag. GRT: 186. FO: 32,298g. FW: 5,394g. BW: 48,198g. Winch: None. 10” double bitt aft. Main
Engines: 2 x GM 16V149TI total 2,560BHP. 4 - blade FP prop(s) on 6” shaft(s). Main & flanking rudders. Repowered
& from Fairbanks and new gears in 2001. Bollard Pull: est. 28T. on 140gphGenset(s): 2 - 60kW / GM4-71 200vAC
60Hz new in 2001 with new switchboard. Quarters: 3-1, 1-2 berth cabins. Air Conditioned. Galley. Harbor tug. 10”
double bitt forward. Copy of April 2009 survey available on request. Reportedly in good condition. New steering 2001.
Last drydock abt. 2008. Currently working. U.S. Gulf Coast.
www.marcon.com
87
File: TG25093 Tug - Twin Screw - 91.9' loa x 26.6' beam x 13.1' depth. Built in 2006 by Malaysia. Belize flag. GRT: 212. FO:
120MT. FW: 35MT. Winch: 30MT towing and tow hook. Main Engines: 2 x CAT D399PCTA total 2,500BHP. Genset(s): 2 - 75kW /
CAT 3306. Quarters: 10 persons. Galley. Caribbean.
2011 by Malaysian Shipyard. Malaysia flag. GRT: 326. Class: BV. Deadweight: 285mt. FO: 240MT. Main
Engines: 2 x Jinan G12V190 total 2,414BHP. 2 - FP prop(s). Speed about 11kn. Genset(s): 2 - 80kW
50Hz / Cummins 6BT 5.9D. Southeast Asia.
2009 by Malaysia Shipyard. Malaysia flag. GRT: 287. Class: NK. Continuous Hull Survey due 08/2014.
Deadweight: 329mt. FO: 260MT. FW: 65MT. Winch: Single drum + 20T tow hook. Main Engines: 2 x
Cummins KTA38M2 total 2,400BHP. 2 - FP prop(s). Endurance 30 days. Bollard Pull: 28T. Speed about
13kn max. Genset(s): 2 - 78kW / Cummins 6BT5.9D(M) AC 415v 50Hz 3ph. Galley. Ready for delivery.
Raised foc'stle bow, conventional twin screw tugs direct from Owners. Two 30m, 2,000HP; one 30m,
2,400HP; three 32m 3,200HP and one 42m, 3,500HP tugs available. Southeast Asia. Prompt.
File: TG23105 Tug - Single Screw - 95.5' loa x 27.1' beam x 13.5' depth x 10.00' loaded draft. Built in
1957 by Ira S, Bushey & Sons, Brooklyn, NY. U.S. flag. GRT: 198. Class: Unclassed, built to ABS.
Loadline expired, but can reportedly be regained. FO: 14,000g. FW: 2,500g. Main Engine: 1 x EMD 12645E7C total 2,400BHP. 99” x 66” 4 blade SS prop(s) on 9” shaft(s). Repowered 1983. Genset(s): 2 75kW Delco / GM 4 - 71 240/480vAC. Quarters: 2-1, 3-2 person berths. Air Conditioned. Galley. All
welded steel construction, model bow tug reportedly “ready-to-go”. Flush main deck, fully enclosed main
deck, superstructure with raised pilothouse. Sewage treatment system, Vickers hydraulic steering pump
system. New galley. Molded rubber sub fendering. Needs cosmetics. May consider long-term bareboat to
qualified charterers. Working. U.S. East Coast. Prompt.
in 2012 by Chinese Shipyard. Foreign flag. Class: ABS + A1 (E) + AMS Towing Service.
Unrestricted. FO: 200m3. FW: 40m3. Winch: Single drum elect/hyd. Line Pull: 30MT. Main
Engines: 2 x Cummins KTA38M2 total 2,400BHP. 2 - FP prop(s). Kort nozzle(s). Range - 4,500nm
max at economic speed, and 12 days at max RPM. Bollard Pull: 30MT. Speed about abt. 10kn.
Pump(s): Ballast/Bilge/GS: 25m3/h, FO: 7.9m3/h, FW: 3.5m3/h. Genset(s): 2 - 91kW / Cummins
415vAC 50Hz. Firefighting: 25m3/h pump. Quarters: 12 men. Air Conditioned. Galley. For sale
direct from shipyard for whom Marcon has handled seven previous sales as sole broker. Currently
under construction. Same builder has several new deck barges for sale ranging in size from 180' to 300'. Far East.
Built in 2008 by Eastern Marine Shipbldg; Malaysia. Singapore flag. GRT: 261. Class: GL
+100 A5 Tug. FO: 195T. FW: 72T. BW: 39T. Winch: 1 - 80T brake single drum; Tow Hook
40T. Line Pull: 30T. Wire Capacity: 600m x 38mm. Main Engines: 2 x Cummins KTA-38-M2
total 2,400BHP. 4 blade Manganese/Bronze prop(s). Kort nozzle(s). Bollard Pull: 30T. Speed
about 11kn. Pump(s): GS/FP: 30m3/h; BW: 30m3/h; FO: 8m3/h. Genset(s): 2 - 80kW /
Cummins. Firefighting: 4 Hydrant with coupling & nozzles. Quarters: 12 Crew. Air
Conditioned. Periodically available for employment to handle movement of complex, heavy lift
& special project cargoes. Southeast Asia.
loaded draft. Built in 1998 by Shanghai Fishing; Shanghai, China. Colombia flag.
GRT: 250. Class: LR +100A1, Tug +LMC (exp. Aug 30, 2013). Deadweight: 184mt.
FO: 183m3. FW: 21m3. Winch: Hydraulic 18T + Tow Hook 65T. Main Engines: 2 x
Yanmar M220EN total 2,400BHP. 2 - FP 2.43m dia prop(s). Kort nozzle(s). 1 300m3/hr Water / Foam mix. Bollard Pull: 36T. Speed about 11.7kn free. Pump(s):
FiFi: 300m3/h / Cummins powered. Genset(s): 2 - 77kW / Cummins 6BT5.9 - G2M
400vAC 50Hz. Firefighting: FiFi monitors. Quarters: 8 in 4 cabins. Oil dispersant
spray booms (82lts/min). Reportedly good overall condition and working. Caribbean.
File: TG24190 Tug - Twin Screw - 98.8' loa x 29.5' beam x 14.0' depth. Foreign flag. Class: NKK.
FO: 199MT. FW: 58MT. BW: 30MT. Winch: Single drum 30MT towing. Line Pull: 80MT brake. Main
Engines: 2 x Cummins DTA38-M2 total 2,400BHP. 2 - FP 4-blade prop(s). Kort nozzle(s). Speed
about 11kn. Genset(s): 2 - 78kW 3ph 50Hz / Cummins. Quarters: 10 persons.
www.marcon.com
88
File: TG24191 Tug - Twin Screw - 95.2' loa x 29.5' beam x 13.9' depth x 11.48' loaded draft. Built in 2012 by Chinese Shipyard.
Foreign flag. Class: ABS A1 Tug, Unrestricted Service. FO: 200m3. FW: 37m3. Main Engines: 2 x Cummins total 2,400BHP. U.K.
manufactured main engines. Bollard Pull: 30T. Speed about 11kn. Genset(s): Cummins (U.K. mfg.). 4 units available prompt. 2 units
under construction. Far East. Prompt.
Foreign flag. Class: BV. FO: 200m3. FW: 37m3. Main Engines: 2 x Cummins total 2,400BHP. U.K. manufactured main engines.
Bollard Pull: 30T. Speed about 11kn. Genset(s): Cummins (China mfg.). Far East. Prompt.
Foreign flag. Class: BV. FO: 200m3. FW: 37m3. Main Engines: 2 x Cummins total 2,400BHP. Chinese manufactured main engines.
Bollard Pull: 30T. Speed about 11kn. Genset(s): Cummins (China). Far East. Prompt.
File: TG26141 Tug - Single Screw - 96.0' loa x 25.2' beam x 11.0' depth. Built in 1957 by
Gulfport Shipbldg.; Pt. Arthur, TX. Rebuilt: 1970. U.S. flag. GRT: 196. FO: 23,000g. FW:
5,000g. Main Engine: 1 x Polar Nohab F212V turbo total 2,400BHP. 114” x 68” 4 blade
stainless prop(s) on 10” shaft(s). Repowered 1970 with 12 cyl. Polar Nohab. Full spare
parts. Bollard Pull: 31.5T. Speed about 11kn free. Pump(s): Bilge. Genset(s): 2 - 60kW
DC/GM6-71 with 2 - 4kW MG sets for AC. Air Conditioned. Reportedly working condition,
ready-to-go. Full electronics. Galley, heat & air conditioning. Negotiable. Being
refurbished with rotten steel being replaced by new inserts. New bulwarks in 2008. New
steel railings on top deck, visor & radar stand. 20' container on shore with $30,000 spare parts (including new turbo, heads, pumps,
injectors, etc.) also available for sale. Interior still needs completed. Try all CASH offers to test. U.S. East Coast. $80,000.
File: TG21092 Tug - Single Screw - 92.0' loa x 26.0' beam x 10.6' depth x 14.50' light draft x
15.40' loaded draft. Built in 1967 by Martinolich SB Tacoma, WA. Rebuilt: 1994. U.S. flag.
GRT: 164. FO: 25,000g. FW: 1,390g. Winch: Markey DYSS-42 +capstan & Hawser winch
(not set up for offshore towing). Main Engine: 1 x EMD 12-645E5 total 2,350BHP. 3 blade
Nautican prop(s). Thrust: 8V149 Turbo. Est. 4,500m range. Fresh water cooled (keel).
Bowthruster 600BHP. Bollard Pull: 46.2ST. Speed about 9-10kn. Genset(s): 2 - 75kW / GM671. Can be paralleled. Quarters: 8 crew. Galley. Bollard pull astern 33st. Dedicated ship
docking service. Combi-tug with Nautican nozzle & triple rudders (+) 600HP retractable bow
thruster (360 deg. Z-peller). Bow thruster driven by DDEC 8-149TIB diesel. Not in operation
and requires work. For sale “as is, where is” out of competition. Rebuilt gear box (less than 10hrs), new clutches and drums (less
than 10hrs), Z-drive has 4,000hrs since last rebuild. Grandfathered for California emissions. Drydock overdue: zinc, paint, etc. U.S.
West Coast. Prompt.
loaded draft. Built in 1976 by Rysco Shipyard, Blountstown, FL. Rebuilt: 1989.
U.S. flag. GRT: 148. Class: Uninspected Coastwise Service. FO: 47,300g. Winch:
Markey Double Drum. Wire Capacity: 2,250' & 1,750' x 2”. Main Engines: 2 x CAT
D399 total 2,250BHP. 2 - FP prop(s). Genset(s): 2 - 40kW / GM6-71. Quarters: 7
crew. Galley. Wagner hydraulic steering gear. U.S. Northwest. Prompt.
File: TG21001 / TG21006 Tugs - Single Screw (2 each) - 97.9' loa x 24.7' beam x 14.0'
depth x 12.00' loaded draft. Built in 1952 by Paceco, Alameda. U.S. flag. GRT: 184. FO:
31,311g. FW: 1,949g. Winch: Markey Single Drum (TYS 18). Wire Capacity: 1200' x 1”. Main
Engine: 1 x EMD 12-645E5 total 2,150BHP. Last Overhaul: 2001. 92” x 46” - 5 blade
stainless prop(s). Genset(s): 2. Quarters: 4 berths. Some wash-boarding in hull and dents
along main deck line. Keen to sell. Inviting serious cash offers. U.S. West Coast. Prompt.
File: TG21101 Tug - Single Screw - 101.0' loa x 26.7'
beam x 12.6' depth. Built in 1955 by Nat'l Steel & Ship. Rebuilt: 1992. U.S. flag. GRT: 189.
Class: ABS Loadline. (exp. July 14, 2013). FO: 35,000g. FW: 2,756g. Winch: Almon Johnson
Single drum 600' under-rider. Wire Capacity: 1800' x 1.75”. Stern Roller. Main Engine: 1 x EMD
12-645E4 total 2,150BHP. 116” x 82” 5 blade SS prop(s) on 9.75” shaft(s). Repowered 1992 at
Duwamish Shipyard. on 1,800g/day. Genset(s): 2 - 42kW / GM4 - 71 120vAC. Fixed Halon in
engineroom. Galley. Aft winch controls. Tow pins aft. Keen Seller. Reportedly good overall
condition. U.S. Northwest.
www.marcon.com
89
File: TG20166 / TG20167 / TG20168 / TG20169 Tugs - Twin Screw (4 each) - 101.7' loa x 30.0'
beam x 14.1' depth x 11.48' loaded draft. Built in 2009 / 2009 / 2010 / 2009 resp. by Malaysian
Shipyard. Malaysia flag. GRT: 326. Class: Nippon Kaiji Kyokai, NK, NS* Tug / MNS LSA, RCF.
Special Survey due 03/2013. FO: 240MT. Main Engines: 2 x Mitsubishi S6R2-MTK3L total
2,064BHP. 2 prop(s). Speed about 11kn. Genset(s): 2 - Cummins 6BT. Southeast Asia.
File: TG20170 Tug - Twin Screw - 99.1' loa x 28.2' beam x 14.1' depth x 11.81' loaded draft. Built in 2006 by Berjaya Dockyard
Sdn Bhd. Malaysia flag. GRT: 269. Class: Nippon Kaiji Kyokai NK NS8 Tug / MNS LSA, RCF. Deadweight: 298mt. FO: 215MT.
Main Engines: 2 x Mitsubishi S6R2-MPTK2 total 2,062BHP. 2 prop(s). Speed about 10kn. Genset(s): 2 - Cummins 6BT5.9-G6.
Southeast Asia.
2004 by Celtug Services Shipyard Sdn Bhd. Malaysia flag. GRT: 261. Class: Nippon Kaiji Kyokai, NK,
NS* Tug / MNS LSA, RCF. Special Survey due 12/2013. Deadweight: 155mt. FO: 165MT. Main
Engines: 2 x Cummins KTA-38-M total 2,026BHP. 2 - FP prop(s). Speed about 11kn. Genset(s): 2 78kW / Cummins 6BT5.9. Southeast Asia.
File: TG20059 Tug - Single Screw - 103.1' loa x 30.3' beam x 14.2' depth x 12.20' loaded
draft. Built in 1972 by Schichau-Unterweser AG; Germany. Foreign flag. GRT: 246. Class:
Formerly GL + 100A5m E2 Tug + MC E2. Now DMRI. FO: 103m3. Winch: 1 - Elect. Hyd.
Tow winch. Wire Capacity: 650m x 36mm. Main Engine: 1 x Deutz SBV6M385 total
2,000BHP. FP prop(s). Kort nozzle(s). Bollard Pull: 30T. Speed about 12kn max.
Firefighting: 2 - 386m3/h Monitors (not operational). Air Conditioned. Galley. Valid vessel
security plan. Try best offers to test. Caribbean.
Built in 2005 by Sealink, Malaysia. Malaysia flag. GRT: 255. Class: BV unrestricted. FO: 160MT.
FW: 70MT. Winch: 1 - 80T @ 25T/min SWL/tow, 1 - Capstan. Wire Capacity: 40mm x 600m. Main
Engines: 2 x CAT 3508 total 2,000BHP. Bollard Pull: 25T. Speed about 12kn. Genset(s): 2 - 80kW
415v 3ph 50Hz. Firefighting: C02 system. Quarters: 14 in 4 cabins. Air Conditioned. 30 day
endurance. Southeast Asia.
loaded draft. Built in 1983 by Bijlholt BV; Netherlands. Mexico flag. GRT: 160. Class:
Ex BV. FO: 54.5T. FW: 15T. Winch: Single drum, Van der Gressen. Main Engines: 2
x Stork Werkspoor 6FFHD240 total 2,000BHP. 2 - CP prop(s). Bollard Pull: 29MT.
Speed about 10kn. Genset(s): 2 - 45kW / Detroit Diesels 220/440vAC 50Hz / 2
Alternators. Harbor / Coastal tug. Available for sale. Sold to current owners by
Marcon. Mexico East Coast.
Built in 2002 by Yuexin Shipbuilding Co; Guangzhou. Singapore flag. GRT: 252. Class: BV I Tug.
Deadweight: 553mt. Main Engines: 2 x Cummins KTA-38-M1 total 2,000BHP. 2 - FP prop(s).
Bollard Pull: 30T. Genset(s): 2 - 104kW. Southeast Asia.
File: TG20163 Tug - Twin Screw - 85.3' loa x 26.2' beam x 12.0' depth x 9.80' loaded draft. Built in 2012 by Malaysian Shipyard.
Foreign flag. total 2,000BHP Kort nozzle(s). Available for sale direct from shipyard. Southeast Asia.
File: TG24173 / TG24186 / TG24187 / TG24188 Tugs - Twin Screw (4 each) - 101.7' loa x 30.0'
beam x 14.1' depth x 11.48' loaded draft. Built in 2010 by Malaysian Shipyard. Malaysia flag. GRT:
326. Class: BV I Tug. Special Survey due 02/2015. Deadweight: 285mt. FO: 220MT. Main Engines: 2
x Mitsubishi 12V190 total 2,000BHP. 2 - FP prop(s). Changing from Jinan diesels to brand new
Mitsubishi main engines. Speed about 11kn. Genset(s): 2 - 80kW 50Hz / Cummins 6BT 5.9D.
Southeast Asia.
Charles D. Holmes & Co. Ltd; UK. Foreign flag. GRT: 142. Main Engine: 1 x Sulzer total
1,960BHP. FP prop(s). Bollard Pull: 26T. Speed about 13kn. Mediterranean. Prompt.
www.marcon.com
90
File: TG19096 Multicat - Triple Screw - 91.8' loa x 41.0' beam x 12.0' depth x 6.20' light
draft x 7.50' loaded draft. Built in 2007 by Kooiman; Zwujndrecht, Netherlands. Netherlands
flag. GRT: 297. Class: BVI + Hull, Mach Tug Unrestricted, AUT-UMS. Deadweight: 244mt.
215m3 clear deck. FO: 148m3. FW: 60m3. BW: 52m3. Crane: 2 - HS Marine 20MT @ 13m.
Winch: Hydraulic anchor handling / towing forward / aft. Line Pull: 100 / 40MT. Wire
Capacity: 100m 56mm / 600m 36mm. Main Engines: 3 x Cummins KTA19M3 total
1,920BHP. 3 - 1,550mm FP prop(s) on C45 steel shaft(s). Kort nozzle(s). 1 - Cummins KTA19M3 for hydraulics. Bowthruster 350HP. Bollard Pull: 29MT. Speed about 11kn. Pump(s):
50m3/h FO & FW transfer pumps including transfer hoses on reels & indicators. Genset(s):
2 - 80kVA / Cummins 220/380vAC 50Hz + shore power. Quarters: 7 in 4 cabins. Air
Conditioned. Galley. Unique, custom multipurpose support vessel / multicat with special characteristics & capacities. Shallow draft.
Fully fendered. Four push knees forward and two aft. 360deg hydraulic retractable thruster. Triple rudders with max rudder angle of
2 x 70 degrees. Heavily constructed 150 ton SWL bow and stern rollers. Two 8T tugger winches with 75m 20mm wire. Two hydraulic
150 tons SWL guide pins. 15MT SWL Mampaey tow hook. Two 600mm x 15m long spuds. 1,000mm diameter moonpool. Cranes
remotely operated. Store room / workshop. Open for charter. Try outright “as is, where is” purchase. Mid East. 2Q 2013.
File: TG20094 Tug - Single Screw - 94.0' loa x 25.0' beam x 12.5' depth x 9.20' light draft x 12.50'
loaded draft. Built in 1942 by Ira S. Bushey & Sons; Brooklyn, NY. Rebuilt: 1981. U.S. flag. GRT: 173.
Main Engine: 1 x EMD 16-567CE2 total 1,800BHP. 5-blade stainless 88” x 57” prop(s). Bollard Pull:
19MT. Firefighting: FiFi. Quarters: 5 berths. Harbor tug. Single screw. Skipper steering system.
Reportedly good condition. Height of eye 20'. Sale “as is, where is”. U.S. Gulf Coast. Prompt.
File: TG17089 / TG17098 Tugs - Tractor (2 total) - 86.3' loa x 28.9'
beam x 12.10' loaded draft. Built in 1978 / 1975 respectively by M. Sieghold; Germany. Germany flag.
GRT: 190. Class: Ex GL. Now PRS. Ice Strengthened. FO: 86m3. Winch: Storewinch Steen Type 380 /
Seebeck 30T Tow hook. Main Engines: 2 x Deutz SBA6M528 total 1,740BHP. Schottel 501/505 prop(s).
6 cyl. 220 x 280mm. Bollard Pull: 25T. Speed about 11.6kn. Genset(s): 2 Deutz F4L912. Europe.
File: TG17079 Tug - Single Screw - 79.3' loa x 26.8' beam x 14.0' depth x 13.40' loaded draft. Built in
1977 by AB Asi-Verken, Amal. Denmark flag. GRT: 124. Class: LR + 100A1 + LMC. Ice Class 1.
Coastal Trade. Winch: Tow hook & polypropylene. Main Engine: 1 x Alpha 12V23LVO total 1,715BHP.
CP prop(s). 4SA Vee 12cyl 225x300mm. Bollard Pull: 18.5T. Speed about 13kn free. Genset(s): 2 88kW / Saab 6cyl 390vac 50Hz. Quarters: 3 persons. Europe Northern.
File: TG18237 Tug - Twin Screw - 77.1' loa x 26.5' beam x 11.0' depth. Built in 1980 by Main Iron
Works, Bayou Blue, LA. U.S. flag. GRT: 106. FO: 19,500g. FW: 3,500g. Winch: Intercon SD150 single
drum / GM4-71 power. Wire Capacity: 2,000' x 1.5”. Main Engines: 2 x CAT D398SCAC total 1,700BHP.
2 - FP prop(s). 12 Cyl. Bollard Pull: 26.4T. Speed about 12kn. Genset(s): 2 - 50kW / GM 4-71. Quarters:
7 crew. Galley. U.S. Northwest.
1966 by Equitable Equip.; Madisonville, LA. U.S. flag. GRT: 191. Class: ABS + A1 Towing Unrestricted.
Last DD 2010 with class renewed. FO: 35,000g. FW: 10,000g. Winch: 40HP electric Markey single drum.
Wire Capacity: 2 x 1,500'. Stern Roller. Main Engines: 2 x CAT D398A total 1,700BHP. 2 - FP 90” x 62”
prop(s). 900HP @ 1,300RPM / each. Bollard Pull: 25ST. Genset(s): 2 - 40kW / CAT D320 60Hz 3ph.
Quarters: 7 berths. Air Conditioned. Galley. Sheer bow. 3 tow pins & hold-down. Forward electric
capstan & H-bitt. Reportedly good condition. Sold to present owners by Marcon. Caribbean. Prompt.
File: TG17002 Tug - Twin Screw - 69.1’ x 26.0' beam x 10.5' depth x 9.00' loaded draft. Built in 1986
by M.F. Martin, Jr.; Brunswick, GA. U.S. flag. GRT: 126. Main Engines: 2 x CAT D398 total 1,700BHP.
Fixed Pitch prop(s). Kort nozzle(s). Bollard Pull: 25T. Firefighting: 1,000gpm. Fully fendered for safe
handling of submarines & surface vessels. U.S. Southeast.
loaded draft. Built in 1981 by Dakota Creek; Anacortes, WA. U.S. flag. GRT: 146. Class: ABS
Loadline (valid till August 2016). FO: 32,330g. FW: 1,650g. BW: 118T. Winch: Single Drum Markey
TYS-24 w/gypsy roller. Line Pull: 25,000lb. Wire Capacity: 1,350' x 1 3/4”. Main Engines: 2 x CAT
D398 total 1,700BHP. 2 - FP prop(s). Kort nozzle(s). Speed about 11kn on 7.5Tpd. Genset(s): 2 90kW 208vAC 60Hz. Quarters: 3 singles, 2 - doubles. Galley. Ice Strengthened, shallow draft. Push
knees, hydraulic tow pins, stern roller. Sold to current owner via Marcon. Vessel has security plan.
U.S. East Coast.
www.marcon.com
91
loaded draft. Built 1981 by Service Machine, Amelia LA. U.S. flag. GRT: 95.: ABS Loadline renewed
June 2012. FO: 50,000g. FW: 10,000g. Winch: Double drum waterfall SAW-46. Line Pull: 100,000lb.
Wire Capacity: 2,000' x 1.5”. Main Engines: 2 x CAT D398B total 1,700BHP. 87” 4-blade stainless
prop(s). Genset(s): 2 - 40kW / GM. Quarters: 6 berths in 3 cabins. Towing & anchor handling tug.
Periodically open for employment. Call for availability and rate ideas. In 2009/2010 entire house gutted
and refurbished. Last drydock June 2012 for ABS loadline renewal & steel replaced in forepeak, chain
locker, ballast tank, rudder room, etc. Reported excellent condition. U.S. Gulf Coast.
File: TG17116 Tug - Twin Screw - 85.3' loa x 26.2' beam x 12.0' depth x 9.80' loaded draft. Built in 2012 by Malaysian Shipyard.
Foreign flag. total 1,700BHP Kort nozzle(s). Two available for sale direct from shipyard. Southeast Asia.
2012. Singapore flag. GRT: 204. Class: NKK. FO: 200T. FW: 80T. Winch: Tow winch, 25T SWL Tow
hook. Main Engines: 2 x CAT 3412D total 1,696BHP. 2 prop(s). Kort nozzle(s). Speed about 11kn.
Genset(s): 2 - 50kW / Yanmar. Quarters: 10 crew. Southeast Asia.
2012 by Hung Seng Shipbuilding; Malaysia. Singapore flag. GRT: 204. Class: NKK. FO: 200T. FW: 80T. Winch: Tow winch, 25T
SWL Tow hook. Main Engines: 2 x CAT 3412D total 1,696BHP. 2 prop(s). Kort nozzle(s). Speed about 11kn. Genset(s): 2 - 50kW /
Yanmar. Quarters: 10 crew. Southeast Asia.
in 2012 by Malaysian Shipyard. Foreign flag. Class: NKK. FO: 134MT. FW: 53MT. Winch: 25T
tow hook. Main Engines: 2 x Yanmar 6AYM-ETE total 1,658BHP. FP 4-blade prop(s). Kort
nozzle(s). Speed about 10kn. Pump(s): FO: 100L/m; FW: 2m3/h; GS/Fire:450L/m; Bilge/Ballast:
450L/m. Genset(s): 2 - 50kW / Yanmar. Firefighting: Pump. Quarters: 10 crew. Air Conditioned.
Galley. Southeast Asia.
File: TG16061 Tug - Single Screw - 110.1' loa x 26.1' beam x 12.8' depth. Built in 1952 by RTC
Shipbuilding. U.S. flag. GRT: 188. Class: ABS + A1 + AMS, Unrestricted. Laid up active classed.
Drydocking due Oct 2012. Annuals overdue Oct 2011. FO: 114m3. Main Engine: 1 x Fairbanks Morse total
1,600BHP. FP prop(s). Genset(s): 1 - 75kW AC; 1 - 40kW AC. May be developed for sale out of
competition. U.S. Northeast.
Built in 1988 by Terrebonne Shipbldg; Houma, LA. U.S. flag. GRT: 97. FO: 20,000g. Winch: 2 20T (Beebe) electric winches aft + 10HP Capstan. Main Engines: 2 x Cummins KTA38M total
1,600BHP. 2 - FP 72” x 62” prop(s) on 6” shaft(s). Speed about 8-11kn. Genset(s): 2 - 50kW /
Cummins. Quarters: 5. Air Conditioned. Galley. Model bow tug started in 1982 and completed
in 1988. Hull reinforced for ice. Enclosed aft control station. Lever steering. Working in fresh
water. U.S. Great Lakes.
File: TG15111 Tug - Twin Screw – 91.9’ x 24.3' beam x 11.8' depth. Built in 2004 by PT Belitung
Dockyard Perdana. Indonesia flag. GRT: 193. Class: BKI A100, Tug Boat, SM. Winch: Tow Hook.
Main Engines: 2 x Niigata 6MG20AX total 1,600BHP. 2 - FP prop(s). Speed about 6kn. Genset(s):
2 - 100kVA / Perkins 380vAC. Air Conditioned. Galley. Southeast Asia.
in 2003 by Tang Tiew Hee, Malaysia. Dominica flag. GRT: 193. Class: Indian Register of Shipping.
Valid Sept 2013. FO: 143m3. FW: 46m3. BW: 27.8m3. Winch: Hydraulic Tow. Main Engines: 2 x
Mitsubishi S6R2.MPTK total 1,600BHP. 2 prop(s). on 2,500L at sea. Genset(s): 2 - 80kW /
Cummins. Quarters: 10 (2-1, 1-8). Galley. Indian Ocean. Prompt.
1949 by G.M. Nichols; Hood River, OR. Rebuilt: 1994. U.S. flag. GRT: 71. FO: 7,000g. Main Engines:
2 x CAT 3508 total 1,550BHP. 3 blade 75” x 60” steel prop(s). Bollard Pull: 19.5T. Genset(s): 2 - 30kW
/ GM3-71 208vAC. Low freeboard. For sale “as is, where is” out of competition. Mechanically sound
with good operational machinery, new bulwarks installed. Requires new exterior water tight doors,
blasting and paint, one shaft and both props need to be reworked. U.S. West Coast. Prompt.
www.marcon.com
92
1998 by R&S Fabrication, LA. U.S. flag. GRT: 97. Class: None. FO: 35,000g. FW: 4,000g. Crane: None.
Winch: Skagit Dbl. Drum W/F (BU-80). Line Pull: 75,000lb. Wire Capacity: 1,600' x 1.25”. Main Engines:
2 x CAT 3412C total 1,500BHP. 2 - FP 65” x 67” stainless prop(s). Kort nozzle(s). Stainless steel type
37 nozzles. PME o'hauled (top end) April 2008. Speed about 11kn. Genset(s): 2 - 35kW / GM371.
Quarters: 5. Air Conditioned. Galley. Harbor/Coastal tug. Main engines new in 1998. Generators &
winch engines re-built. Tire fendering. Aluminum wheelhouse doors. U.S. Gulf Coast.
draft. Built in 2012. Singapore flag. GRT: 231. Class: GL, ABS + A1. FO: 141.2m3.
FW: 53.7m3. Crane: Fassi 98.2MT marine grade. Derrick/A-Frame: Hydraulic AFrame. Winch: Single Drum 50T brake tow & 30T SWL tow hook. Line Pull: 25T. Stern
Roller. Main Engines: 2 x CAT 3412C TA total 1,440BHP. 1,400mm 4-blade FP
prop(s). Bollard Pull: 19T. Speed about 8.5kn. Genset(s): 2 - 150kW / CAT 3406C
415vAC 50Hz. Galley. Shallow draft, flow-through design Multi-Cat. Draft only 4.9' with
50% liquid capacity. Far East. December 2012.
File: TG14107 Tug - Twin Screw - 58.1' loa x 17.6' beam x 4.1' depth. Built in 1975 by Sikanni Oilfield
Construction; BC. Canada flag. GRT: 45. Main Engines: 2 x CAT C-18 total 1,430BHP. New engines in 2008.
Speed about 8-9kn. Truckable. 2008 upgraded hull, new bow fabricated and pusher frames built. Extensive
overhaul in 2008. Currently stored offshore. Canada.
File: TG14052 Tug - Twin Screw - 52.0' loa x 16.0' beam x 5.0' depth. Built in 1957 by Mertel Gravel Co.; Peru, IL. U.S. flag. GRT:
48. Class: USCG. Main Engines: 2 x Cummins NTA-855-A335 total 1,400BHP. Last Overhauled: 2004. Retractable pilothouse. U.S.
Midwest. By Arrangement.
File: TG13095 Tug - Tractor - 94.7' loa x 27.5' beam x 11.4' depth x 12.46' loaded draft.
Built in 1961 by Bodewes Millingin; Netherlands. Portugal flag. GRT: 168. Class: TL. FO:
32T. Main Engines: 2 x Stork Werkspoor total 1,360BHP. 2 - Voith Schneider prop(s).
Bollard Pull: 16T. Speed about 11kn. Mediterranean.
File: TG19065 Tug - Twin Screw - 65.0' loa x 23.0' beam x 11.0' depth x 9.50' light
draft x 11.00' loaded draft. Built in 1977 by Jones Tug & Barge; Long Beach, CA. U.S.
flag. GRT: 95. FO: 19,500g. FW: 800g. Winch: Markey Hydraulic Double drum w/cat
head. Wire Capacity: 1 1/2” x 1,500'. Main Engines: 2 x GM 12V149 total 1,350BHP.
Last Overhauled: 11/93. 2-FP 59” x 59” 4-blade Kaplan prop(s) on 5.5” shaft(s). Kort
nozzle(s). Stainless steel lined nozzles. Keel cooled. Speed about 10kn. Genset(s): 2 30kW LIMA / GM6-71 and GM4-71. Quarters: 4. Steel hull with aluminum two-level
deckhouse. 34” high reinforced steel bulwarks reducing aft to 18” around stern. Fully
fendered. 2 cat heads, 2 anchor gypsies & wire drum on bow. Air start. Both main engines rebuilt in 11/1993. Reduction gears
replaced new in 1996. Elevated fly bridge with control station plus controls aft of engine trunk. Working. U.S. Northwest. Prompt.
File: TG13092 Tug - Tractor - 84.0' loa x 24.7' beam x 9.8' depth x 14.40' loaded draft. Built in 1970 by
Jadewerft, Germany. Italy flag. GRT: 143. Class: RINA. FO: 36.4m3. FW: 28.0m3. BW: 18.0m3. Winch:
1-3T tugger, 2 tow hooks. Main Engine: 1 x Deutz SBV8M545 total 1,320BHP. Last Overhauled: 03/92.
Voith Schneider 30G/185A5 prop(s). Bollard Pull: 15MT. Speed about abt. 12kn. Genset(s): 1 - 25kW /
aux & 1 - 25kW / shaft. Voith Schneider tractor. Reportedly in good working condition and currently
trading in spot market. Marcon has sold 6 or 7 boats to this owner over the last 15 years.
Mediterranean.
File: TG13093 Tug - Twin Screw - 77.1' loa x 24.0' beam x 10.5' depth. Built in 2012 by Eastern Marine
Shipbldg. Sdn; Sibu. Singapore flag. GRT: 148. Class: Nippon Kaiji Kyokai. Main Engines: 2 x Yanmar 6AYMWST total 1,300BHP. 2 prop(s). Bollard Pull: 25T. Southeast Asia.
by S.B.A. Shipyards; Jennings, LA (USA). Rebuilt: 2003. U.S. flag. GRT: 145. FO: 25,000g. FW: 8,000g.
Winch: Hydraulic single drum. Line Pull: 75,000lbs. Wire Capacity: 2,000' x 1.25”. Main Engines: 2 x
Cummins KTA 19-M4 total 1,280BHP. Fixed pitch 72” X 76” prop(s) on 6” shaft(s). Replaced GM 16V92s
with new Cummins engines. Fitted with stern controls. Genset(s): 2 - 30kW / GM 371. Quarters: 6 berths
in 3 cabins. Air Conditioned. Galley. Model bow tug with upper pilothouse with 34' height of eye. For sale
out of competition. U.S. Gulf Coast.
www.marcon.com
93
Coastal Pilots; Providence, RI. U.S. flag. GRT: 97. Class: No loadline. FO: 26,000g. FW:
2,500g. BW: 12,000g. Crane: Hydraulic telescoping boom. Winch: Bevis hydraulic single
drum. 2 tow pins. Wire Capacity: 1,800' x 1.5”. Stern Roller. Main Engines: 2 x CAT
3412TA total 1,250BHP. Last Overhauled: 1991. 55.6” x 62” 4 blade stainless prop(s) on
5.25” Stainless shaft(s). Kort nozzle(s). Shaft brakes. Endurance 17 days. Genset(s): 2 40kW / John Deere. Air Conditioned. Galley. 1999 survey available. U.S. Northwest.
File: TG12145 Tug - Twin Screw - 75.5' loa x 23.0' beam x 12.0' depth x 9.14' loaded draft. Built in 2012.
Singapore flag. FO: 98.79MT. FW: 42.28MT. Winch: 1 - 20MT tow hook. Main Engines: 2 x Weichai
X6170ZC620-4 total 1,240BHP. Speed about 10kn. Genset(s): 2 - 50kW / Cummins 4TB 3.9. Quarters: 8
persons. Galley. Southeast Asia.
File: TG12151 Tug - Twin Screw - 75.5' loa x 23.0' beam x 12.0' depth x 9.51' loaded draft. Built in 2012. Singapore flag. FO:
98.79MT. FW: 42.28MT. Winch: 1 -2.5MT tow hook. Main Engines: 2 x Cummins KTA19M3 total 1,240BHP. Speed about 10kn.
Genset(s): 2 - 50kW / Cummins 4TB 3.9. Quarters: 10 persons. Galley. Southeast Asia.
by Blount/Barker Shipyard. U.S. flag. GRT: 63. FO: 10,600L. FW: 800L. Winch: 2 - Hyd winches /
Pullmaster M25. Main Engines: 2 x CAT 3412 total 1,230BHP. 4 blade fixed 1,270mm dia prop(s). Bollard
Pull: 8.6T. Genset(s): 1 - 32kW / Northern Lights 984. Firefighting: EMD Griswold HL 3”x2” 5HP fire pump.
Model bow harbor tug, square pusher bow w/ 14' push knees. All welded steel construction. Open bow,
well fendered. H-bitt on centerline aft deck. Can be shipped overland with house removed, on an
“oversized load” basis. Owner recently spent $600K on refurbishing tug. U.S. West Coast. Prompt.
File: TG12149 Tug - Twin Screw - 72.4' loa x 24.0' beam x 10.2' depth. Built in 2008 by Hung Seng
Shipbuilding Sdn Bhd; Sibu. Singapore flag. GRT: 137. Class: GL + 100A5 SS 2013. Main Engines: 2 x
Cummins KTA-19-M3 total 1,200BHP. FP prop(s). Bollard Pull: 25T. Speed @10kn. Southeast Asia.
File: TG11084 Tug - Single Screw - 84.0' loa x 21.5' beam x 10.8'
depth x 8.70' loaded draft. Built in 1951 by B&W Shipyard; Copenhagen. Denmark flag. GRT:
98. Class: Lloyds + 100A1. Ice Class II. Coastal Trade. Main Engine: 1 x B&W 8V23LVO total
1,160BHP. CP prop(s). M/E new '75. Bollard Pull: 12.6T. Speed about 11.5kn. Firefighting:
FiFi. Quarters: 4 persons. Europe Northern.
File: TG11582 Tug - Single Screw - 81.0' loa x 24.0' beam x 9.8' depth. Built in 1944 by Neponset, MA.
Rebuilt: 1997. U.S. flag. GRT: 145. FO: 19,500g. FW: 2,000g. Winch: Capstan & Facing winches. Main
Engine: 1 x EMD 12-645 total 1,150BHP. 4 blade 86” x 62” S.S. prop(s). Pump(s): Blige: 10HP; FO:
5HP. Genset(s): 2 - 75kW / GM6-71. Firefighting: 10HP pump. Quarters: 6. Air Conditioned. Galley.
Freshwater service last 30 yrs., aft engine & steering control station overlooking aft deck, capstan winch,
hydraulically powered retractable mast, 2 ea. electro-hydraulic facing winches, extensive electrical and
fire suppression updates in 2010, gray water evaporator (2010) and Incinolet head. Current USCG
Inspection for Uninspected Towing Vessel. Price reduced from $300,000. U.S. Great Lakes. $175,000.
File: TG11060 Tug - Twin Screw - 60.0' loa x 20.0' beam x 7.8' depth. Built in 1970 by A.W.
Covacevich Shipyard; Biloxi MS. Rebuilt: 2003. U.S. flag. GRT: 67. Class: None. FO: 7,000g. FW:
2,000g. Winch: Skagit Single Drum / GM3-71 power. Line Pull: 50,000lb. Wire Capacity: 900' x
1.5”. Stern Roller. Main Engines: 2 x CAT C-18 total 1,100BHP. 49” x 54 4 blade SS prop(s).
Repowered 2010 with Tier II marine diesels. Speed about 9kn. Genset(s): 2 - 20kW / GM 2-71.
Quarters: 4 berths. Air Conditioned. Galley. Model bow coastal tug. Reportedly completely rebuilt
in 2004. U.S. West Coast.
File: TG11058 Tug - Single Screw - 57.4' loa x 19.7' beam x 6.6' depth. Built in 2001 by Greece. Greece
flag. GRT: 47. Class: Ministry of Mercantile Marine. Out of class. Main Engine: 1 x CAT 3412 total
1,100BHP. Speed about 10kn. Mediterranean. Prompt.
depth. Built in 1977 by Greece. Greece flag. GRT: 60. Main Engine: 1 x CAT total
1,000BHP. Mediterranean.
www.marcon.com
94
File: TG09699 Tug - Single Screw - 99.1' loa x 25.0' beam x 7.5' depth. Built in
1962 by Yarwood, U.K. Greece flag. GRT: 164. Class: Deep-sea A2. Main Engine:
1 x B&W total 960BHP. Mediterranean. Prompt.
File: TG09045 Tug - Twin Screw - 45.0' x 18.0' x 6.3' depth x 5.30' light draft. Built 1965
by Harrison Brothers Shipyard, Alabama. Rebuilt: 2003. U.S. flag. GRT: 39. FO: 4200g.
Winch: 2 - Elect. Hydraulic facing. Main Engines: 2 x CAT 3406E total 900BHP. 3 blade
46”x32” S.S. props on 3.75” shafts. Only 2,850hrs on engine, new 2003. Genset(s): 2 35kW, new 2006 1,600hrs. Galley. Freshwater boat last 27 yrs. Cat digital machinery
display, 2 Nabrico electro-hydraulic facing winches, extensive electrical & fire suppression
updates in 2010, USCG COI for Uninspected Towing Vessel. Single Push knee. Reduced
from $400,000. U.S. Great Lakes. $300,000.
in 1970 by Garrett Construction Co. Rebuilt: 2003. U.S. flag. GRT: 39. Main Engines: 2 x MTU
S60 total 900BHP. 4-blade stainless 45” x 26” prop(s). Bollard Pull: 9MT. Quarters: 4. 18.3'
height of eye. Raised pilothouse over main deckhouse. Model bow with single push knee.
Vessel sank and has been raised. Main engines non-operational. Basically a hull. New lower
price ideas. U.S. Gulf Coast. Prompt.
John E. Matton & Sons. Rebuilt: 2010. U.S. flag. GRT: 72. Class: USCG COI Expires
05/2011. FO: 6,000g. FW: 1,300g. BW: 3,000g. Main Engine: 1 x CAT total 850BHP. 72” x
60” 4 blade @ 300RPM prop(s). Genset(s): 1 - 40kW; 1 - 21kW Marine Kubota.
Firefighting: CO2 suppression sys. in engine room. Quarters: 1 - single, 1 - double. Galley.
65' US Army tug ST. Modernized in 2010. Keel coolers. U.S. Northeast.
File: TG08051 Tug - Single Screw - 50.9' loa x 18.1' beam x 5.6' depth. Built in 1999 in
Greece. Greece flag. GRT: 39. Class: Ministry of Mercantile Marine exp. 05/2004. Main
Engines: 2 x CAT 3408B total 804BHP. Speed about 10kn. Mediterranean. Prompt.
File: TG08043 Tug - Twin Screw - 43.0' loa x 16.4' beam x 5.7' depth. Built in 1988 by Ingleside,
Texas Yard. Rebuilt: 2010. U.S. flag. GRT: 35. Light Disp.: 61st. FO: 2,500g. FW: 1,000g. Winch: 2
hand operated deck forward. Double tow bitt aft. Wire Capacity: 0.75”. Main Engines: 2 x CAT 3406B
total 800BHP. 46” x 38” SS four blade prop(s) on 3” stainless shaft(s). Morse type cable engine controls.
New main engine keel coolers in 2010. Pump(s): 1 - Pacer fire pump. Genset(s): 2 - 21kW / Kubota AC
keel cooled new 2010. Firefighting: 100lb. semi-portable CO2 fire extinguisher for engine room. Air
Conditioned. Galley. Welded steel typical inland tug. Bow fitted with single push knee. Deep “vee” bow.
2-1/2 tier deck aluminum house new in 2010. Completely refurbished November 2010 including
replacement of all machinery, vessel equipment, electrical wiring, electronics, gauges, coatings,
hydraulics, generators interior joiner work and piping. New bottom jobs April - May 2011. Reportedly in
very good condition and ready for immediate service. Copy of 29 December 2010 survey & audio
Gauge available on request. Four close twin screw sister-tugs built 1981 – 1993 and one single screw available. Motivated seller.
Inviting best firm cash offers either individually or en-bloc after inspection. U.S. Gulf Coast.
File: TG08045 Tug - Twin Screw – 45.6’ x 16.8' beam x 5.8' depth x 5.30' loaded draft. Built in
1968 by Souyres Marine Service. Rebuilt: 2004. U.S. flag. GRT: 32. Main Engines: 2 x MTU S60
total 800BHP. 4-blade stainless 45” x 28” prop(s). Bollard Pull: 9MT. Genset(s): Northern Lights.
Quarters: 4 berths. Model bow, twin screw with single push knee. Triple deck, inland pushboat
design. 21.7' height of eye. Due to competition concerns the tug will not be sold for operation
between Corpus Christi and Brownsville, TX. Generally poor condition. 2010 survey on file. New
lower price ideas. U.S. Gulf Coast. Prompt.
File: TG08068 Tug - Twin Screw - 65.6' loa x 18.1' beam x 9.2' depth. Built in 2011. Tuvalu flag. GRT:
50. FO: 40MT. FW: 20MT. Winch: towing hook. Main Engines: 2 x Cummins NTA855 total 800BHP.
Quarters: 8 persons. Galley. Southeast Asia.
File: TG08081 Tug - Twin Screw - 70.0' loa x 20.6' beam x 10.7' depth x 10.48' loaded draft. Built in 1977 by Gulf Pacific S/Y Pte;
Singapore. Malaysia flag. GRT: 100. Class: SCM (ex-ABS). Main Engines: 2 x CAT D343TA total 800BHP. Fixed pitch prop(s).
Bollard Pull: 12T. Speed about 10.5kn. Genset(s): 2 - 24kW. Working. Southeast Asia. Prompt.
www.marcon.com
95
Humber, St. Andrew, UK. Greece flag. GRT: 142. Class: MSIS. Deadweight: 22T. FO:
22MT. FW: 65MT. Winch: None. Main Engines: 2 x Lister ERSM total 792BHP. 6 cyl.
Bollard Pull: 13MT. on 3MT/d. Genset(s): 2 - 20kW. Range - 8 days. Salvage. Portable
pumps, foam system, anti-pollution, etc. Prompt.
File: TG07363 Tug - Twin Screw - 63.9' loa x 21.3' beam x 10.5' depth. Built in 1981 by Singapore.
Singapore flag. GRT: 92. Class: GL. Light Disp.: 192T. FO: 55T. FW: 23T. Winch: AH&D Towing
winch. Main Engines: 2 x CAT D343TA total 730BHP. 2 - 4blade 1,220mm x 1,016mm prop(s).
Endurance: @ 23 days. Bollard Pull: 10T. Speed about 10kn on 2.5Tpd. Genset(s): 2 - 27.5kVA
440v 3ph 50Hz. Quarters: 10. Passengers: 12. Southeast Asia.
Tuzla; Istanbul, Turkey. Foreign flag. GRT: 71. Deadweight: 16. Hold Capacity: 45m3
Crane: 2.5T. Main Engine: 1 x MAN total 550BHP. Speed about 10kn. Utility launch / tug.
Mediterranean.
File: TG05063 Tug - Single Screw - 61.1' loa x 14.7' beam x 5.4' depth. Built in 1968. Rebuilt:
2010. Foreign flag. Main Engine: 1 x Iveco total 500BHP. Bollard Pull: 11T. Mediterranean.
Prompt.
File: TG05046 Tug - Single Screw - 45.9' loa x 14.4' beam x 7.1' depth. Built in 1976.
Foreign flag. Main Engine: 1 x Iveco total 500BHP. Bollard Pull: 9T. Mediterranean. Prompt.
depth. Built in 1974. Foreign flag. Main Engine: 1 x Mercedes total
500BHP. Bollard Pull: 9T. Mediterranean. Prompt.
File: TG04048 Tug - Twin Screw - 47.0' loa x 16.0' beam x 5.50' loaded draft. Built in 1988 by Mangone Shipyard, Houston TX.
U.S. flag. Class: None. Last D/D 04/03. Winch: 2 bow & 2 stern barge make-up winches. Main Engines: 2 x CAT 3306 total
485BHP. Stainless Steel prop(s) on Stainless steel shaft(s). One rebuilt within past year. Genset(s): 1 - 35kW / Cummins 4 cyl new
Aug 2002. Quarters: 4 berths in 2 cabins. Galley. Low model bow. Good rig tender. Height of eye = 21'. 3 stories, flat front house. DRub rail. Reportedly in “A-1” shape. Round bilge. 1 push knee. Water tight doors on main deck. U.S. Gulf Coast.
File: TG04548 Tug - Single Screw - 49.2' loa x 16.4' beam x 5.58' loaded draft. U.K. flag. Class:
Licensed to carry 10 passengers & 2 crew. FO: 4T. Main Engine: 1 x CAT total 450BHP. 1 - FP
prop(s). Bowthruster. Bollard Pull: 5T. Speed about 9kn. Genset(s): 1 - 5.5kVA Kipor. Quarters:
Day. Ideally suited for standby / crew transfers. Can also be fitted with an “A” frame, winch & plough
for dredging. U.K.
Germany. Rebuilt: 1999. Foreign flag. GRT: 82. Crane: Boat davit. Main Engine: 1 x
CAT total 440BHP. Kort nozzle(s). Repowered 1999. Speed about 13kn on 2MT/day.
Quarters: 8 persons. Mediterranean.
File: TG04043 Tug - Single Screw - 43.0' loa x 16.4' beam x 5.6' depth. Built in 1968 by Ingleside, Texas
Yard. Rebuilt: 2005. U.S. flag. GRT: 22. Light Disp.: 40st. FO: 2,000g. FW: 400g. Winch: 2 hand operated
tuggers & double tow bitt. Wire Capacity: 0.75”. Main Engine: 1 x CAT 3406C total 400BHP. 46” x 38” SS
four blade prop(s) on 3” SS shaft(s). Morse type cable clutch / throttle controls. Pump(s): 1 - Pacer fire
pump. Genset(s): 2 - 21kW / Kubota AC keel cooled new 2004/05. Air Conditioned. Galley. Welded steel
typical inland tug. Bow fitted with single push knee. Deep “vee” bow. New fabricated 2-1/2 level aluminum
wheelhouse, repowered, new shaft & new prop, all new wiring, new electronics, hydraulics and piping in
2004/05. Reportedly very good condition and ready for immediate service. Copy of January 2011 survey &
audio-gauge available on request. Four twin screw close sister-tugs also available. Inviting firm cash offers
individually or en-bloc after inspection. U.S. Gulf Coast.
File: TG02515 Tug - Single Screw - 43.6' loa x 15.0' beam x 4.6' depth. Built in 1977. U.S. flag. Main Engine: 1 x
CAT D343S total 250BHP. 4 blade bronze 52” x 40” prop(s). U.S. West Coast. $63,000.
www.marcon.com
96
Singapore. Singapore flag. GRT: 31. Class: NKK, IS. FO: 12T. FW: 6T. Main Engine: 1 x CAT
3306 total 240BHP. 4 blade 1016mm dia prop(s). Endurance: @ 10 days. Bollard Pull: 10T.
Speed about 7.5kn on 1.2Tpd. Genset(s): 1 - 3.7kW 230V 13A/26A 3kVA. Quarters: 6
accommodations. Southeast Asia.
File: TG01824 Tug - Twin Screw - 24.9' loa x 10.0' beam x 4.0' depth. U.S. flag. FO: 1,000g. Main Engine: 1 x CAT 3208 total
180BHP. 2 - FP prop(s). Hydrostatic Drive. 04/12 New shafts and cutlass bearings in 2011. Small dredge support boat. Twin screw
with diesel powered hydrostatic drive. Stick boom aft with 10T hydraulic tugger. Aft steering / control station. Owner prefers an enbloc sale with 166' OSV (see SU16517) and / or 12” cutter suction dredge (see DR04414). Call Marcon for more details and to
arrange prompt inspection. U.S. Northwest. Prompt.
File: TG01632 Tug - Single Screw - 36.0' loa x 11.3' beam x 4.0' depth x 3.00' light draft
x 4.00' loaded draft. Built in 1958 by Houma, LA. U.S. flag. GRT: 10. Class: Last DD
Summer 2011. FO: 400g. FW: 130g. Winch: Steel “H” bitt aft. Main Engine: 1 x GM 6-71
total 165BHP. 4 blade 30” x 30” RH prop(s) on 2 Stainless shaft(s). Engine & transmission
overhauled 08/98. Speed about 10kn free. Pump(s): 2-115v 1” submersible +2” Honda gas
driven. Wood hull. Currently working. Full electronics. Fully fendered. Can be delivered via
truck & trailer. Working daily. Hauled and painted annually, most recently Oct 2012. Needs
some minor work on overhead in engine area. U.S. West Coast. Prompt.
File: TG01025 Tug - Single Screw - 25.7' loa x 8.5' beam x 3.70' loaded draft. Foreign
flag. Deadweight: 2T. Light Disp.: 5,673T. Main Engine: 1 x John Deere 4045 TFM M2
total 120BHP. 26” Fixed pitch prop(s) on Stainless steel shaft(s). Speed about 7kn. Type
Tomboy 26. Open workboat. Europe.
We are also interested in receiving your news, press releases and comments on the market for our next market report.
Custom lists of conventional, azimuthing or tractor tugs & AHTSs available for sale, charter or newbuilding designs on
request. Further details on these and other tugs and barges are available on our website at www.marcon.com.
www.marcon.com
97

Marcon International, Inc.

Transcription

Similar documents

AVERAGE MEAL COST: N$ 140 NON

HARBOUR TUG 45 TON BOLLARD PULL

bayu intan - EMAS Offshore Limited

Tug design advances through the years by Jack Gaston

Replacing LCD Inverter on a Dell Inspiron 8600 to

Tug Boat Market Report - Marcon International, Inc.

Port Ash Australia The Use of Manned Models for Shiphandling

Closing Session Slides - The UK National Work

Ship with tug escort 2010 (birds eye view)

Newsletter 14 2013 - Subscribe