TL26 - Takeuchi

I
TAKEUCHI
TL26 SPECIFICATIONS
PERFORMANCE
Tipping load (lbs.) SAE 732
HYDRAULIC SYSTEM
3750
1310
Hydraulic reservoir capacity (Gal.)
Auxiliary hydraulic flow (GPM)
System operating pressure (PSI)
STANDARD EQUIPMENT
13.2
• Two-way auxiliary hydraulics
•Hydraulic self-leveling bucket
•Quick attach mounting bracket
4930
• Console mounted servo joystick controls
CYCLE TIME
with arm rests. float and horn switch.
UNDERCARRAIGE
Eleclronic monitoring system.
•
Raise - full load (seconds)
4.2
Traction motor type
Piston
• Emergency engine shutdown system
2.5
Lower - no load (seconds)
Rear clearance radius
59.1"
Planetary •Air cleaner with safety element
Traction drive type
26°
2.7 Traction brake type
Angle of departure
Dump • full load (seconds)
Friction •Fuel gauge
•ROP&fOPS lllt·up operators
2.1
119.2"
Curl • full load (seconds)
MaxiJT1urn lift height to bucket pm
6514
Traction force (lbs.)
compartment.
Durn height fully raised
93 8"
Track rollers per side
5 • Four-way adjustable suspension seal.
ENGINE
38°
Max. dump angle fully raised
Rubber crawler belt • Lap oar and seat belt operator's restraint
Shoe type
Isuzu 4JB1
Make/model
• Litt arm stop.
°
Max. bucket rollback at ground level
30
12.6'' •Back up alarm.
Shoe width
61/2600
Horsepower/RPM (SAE gross)
27.8"
Reacti rully raised
46.5" • Planetary final drives with integral
Track ground contact length
4
Cylinders
drsc brakes
Ground pressure (PSI)
5.8 • Grease-type t
169
Displacement (CID)
rack ad1ustment wrth
10.8" cushion spnng
Minimum ground clearance
15.6
Fuel tank capacity (Gallons)
Maximum travel speed (MPH)
5.3 • Positive friction travel brakes applied by
87.0
Noise level at operator's ear (d.b.a.)
ity SAE Heaped (Cu. Ft.)
lap bar. engine shut oft and independent
brake lever.
•Rear and top windows
In accordance with our establtshed policy of continued improvement. spec1ftcattons and features are sub1ect to change without
• Front and rear worlc l�ht�.
notice Pictures of track loader may show other than standard equipment.
·operating capacity of track loader to be rated accord• Key lock engine compartment and
°
ing to SAE J818 al no more than 35 � of tipping load
fuel cap.
• Hydraulic oil cooler.
Overall width without bucket
Overall height
Ove1111 1ength with bucket
Fron clearance radius w/bucket
60.2"
79.4"
130.4"
81.0"
Operating Capacity (lbs.)· SAE JS1s
Breakout force (lbs.) bh cy1,nders onty
r,AKEUCHI
519 Bonnie Valentine Way
Pendergrass, GA 30567
Phone: 706-693-3600 / Fax: 706-693-3725
I
Sold By:
18.0
2276