docbell lubricants - Bell Equipment
download 
Report Transcription
bell lubricants - Bell Equipment
BELL LUBRICANTS Rev 5 Engineered for your machine 1 IndexPg Bell Machines Articulated Dump Trucks & Articulated Tractor................................................................................................................................... 03 Front End Loaders .............................................................................................................................................................................................. 04 Rigid Tractors ........................................................................................................................................................................................................ 05 Tri-Wheeled Loaders ......................................................................................................................................................................................... 06 Excavators .............................................................................................................................................................................................................. 07 Backhoe Loaders ............................................................................................................................................................................................... 08 Dozers ....................................................................................................................................................................................................................... 09 Motor Graders ...................................................................................................................................................................................................... 10 Bomag ............................................................................................................................................................................................................. 11 - 12 Forestry............................................................................................................................................................................................................ 13 - 14 Bell Lubricants Mineral Engine Oil 15W-40 ........................................................................................................................................................................... 15 Semi Synthetic Engine Oil 10W-40 .......................................................................................................................................................... 16 Engine Run-in Oil 15W-40.............................................................................................................................................................................. 17 Automatic Transmission Oil .......................................................................................................................................................................... 18 Manual Transmission Oil ................................................................................................................................................................................ 19 Torque Fluid 434 ................................................................................................................................................................................................. 20 Hydraulic Oil VHVI .............................................................................................................................................................................................. 21 Hydraulic Oil VG 32............................................................................................................................................................................................ 22 Hydraulic Oil VG 46............................................................................................................................................................................................ 23 Hydraulic Oil VG 68............................................................................................................................................................................................ 24 Universal Tractor Fluid ..................................................................................................................................................................................... 25 Gear Oil 85W-140................................................................................................................................................................................................ 26 Gear Oil Limited Slip 80W-90....................................................................................................................................................................... 27 Gear Oil Limited Slip 85W-140.................................................................................................................................................................... 28 Borate Oil................................................................................................................................................................................................................. 29 Brake Fluid ............................................................................................................................................................................................................. 30 Extended Life Coolant - Premix 50 .......................................................................................................................................................... 31 Extended Life Coolant - Premix 50 N ..................................................................................................................................................... 32 Grease - Multi Purpose ................................................................................................................................................................................... 33 Grease - Super Heavy Duty........................................................................................................................................................................... 34 Grease - Wheel Bearing .................................................................................................................................................................................. 35 Grease - High Temperature ........................................................................................................................................................................... 36 Cutter Bar Oil ........................................................................................................................................................................................................ 37 Machining Fluid..................................................................................................................................................................................................... 38 Hand Cleaner......................................................................................................................................................................................................... 39 Bell Lubricants Recommendations in accordance with Bell Equipment specifications The recommendations provided herein are given in good faith and on the basis of the best information available at the time of issue. It is the responsibility of the user to ensure that the products are used in the applications for which they are intended, and no legal liability therefore is accepted by Bell Lubricants 2 Articulated Dump Trucks & Articulated Tractors Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine C-series D-series & E-series Recommendations Mineral Engine Oil 15W-40 Semi Synthetic Engine Oil 10W-40 Part Numbers BN005541 BN005545 Coolant Extended Life Coolant - Premix 50 BN005611 Transmission Automatic Transmission Oil BN005548 Transfer box Automatic Transmission Oil BN005548 Axles C-series, D-series & E-series with Dry Disc Brakes D-series & E-series with Wet Disc Brakes Gear Oil Limited Slip 80W-90 Borate Oil BN005574 BN005579 Wet disc brakes Cooling B40D Brake cooling reservoir Universal Tractor Fluid BN005583 Dry disc brakes B40C & B35C Brake Fluid BN005559 Hydraulics* Hydraulic Oil VHVI Hydraulic Oil VG68 BN005556 BN005597 Grease General (Pin, Bushes, Auto greasing, etc.) Grease - Multi Purpose Drivetrain (Bearings & Propshaft, etc.) Grease - Wheel Bearing Drivetrain (High Temperature PTO-where applicable) Grease - High Temperature BN005567 BN005561 BN005770 * Either oil may be used but do not mix. (Drain and refill only) 3 Front End Loaders Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine D-series & E-series C-series Recommendations Semi Synthetic Engine Oil 10W-40 Mineral Engine Oil 15W-40 Part Numbers BN005545 BN005541 Coolant D-series & E-series C-series Extended Life Coolant - Premix 50 N Extended Life Coolant - Premix 50 BN005608 BN005611 Transmission C-series & D-series & E-series Universal Tractor Fluid BN005583 Axles C-series, L705D - L1004D & E-series D-series & E-series Gear Oil Limited Slip 80W-90 Universal Tractor Fluid BN005574 BN005583 Wet brakes / Park brake Universal Tractor Fluid BN005583 Dry disc brakes B-series Brake Fluid BN005559 Universal Tractor Fluid Semi Synthetic Engine Oil 10W-40 or Mineral Engine Oil 15W-40 BN005583 BN005545 BN005541 Grease - Multi Purpose Grease - Wheel Bearing BN005567 BN005561 Hydraulics C-series, 1706D MKII &L1806D - L2706D L705D - L1706D & E-series Grease General (Pin, Bushes, etc.) Drivetrain (Bearings, Propshaft, etc.) 4 Rigid Tractor Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine Engine Recommendations Mineral Engine Oil 15W-40 Part Numbers BN005541 Coolant Extended Life Coolant - Premix 50 BN005611 Transmission Manual Automatic (Series -I) Automatic (Series -II & MKIII) Manual Transmission Oil Torque Fluid 434 Automatic Transmission Oil BN005592 BN005589 BN005548 Transfer Box Gear Oil Limited Slip 80W-90 BN005574 Axles Gear Oil Limited Slip 80W-90 BN005574 Hydraulics Hydraulic Oil VG 68 BN005597 Grease Grease - Multi Purpose BN005567 5 Tri-Wheeled Loaders Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine Engine Recommendations Mineral Engine Oil 15W-40 Part Numbers BN005541 Axles / Wheels Gear Oil Limited Slip 80W-90 BN005574 Park Brake Housing Mineral Engine Oil 15W-40 BN005541 Hydraulics Hydraulic Oil VG 68 BN005597 Grease Grease - Multi Purpose BN005567 6 Excavators Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine Mk1/2/3 & R# E#, R964C & R974C Recommendations Mineral Engine Oil 15W-40 Semi Synthetic Engine Oil 10W40 Part Numbers BN005541 BN005545 Coolant Mk1/2/3, R#, E#, R964C & R974C Extended Life Coolant - Premix 50 N BN005608 Final Drive & Slew Gear Box Mk1/2/3, R# E#, R964C & R974C Gear Oil Limited Slip 85W-140 Gear Oil Limited Slip 80W90 BN005586 BN005574 Pump Distributor Gear E#, R964C & R974C Gear Oil Limited Slip 80W90 BN005574 Hydraulics Mk1/2/3, R# E#, R964C & R974C Universal Tractor Fluid Mineral Engine Oil 15W40 BN005583 BN005541 Grease Mk1/2/3, R#, E#, R964C & R974C General (Pin, Bushes, etc) Swing Ring - All Excavators Grease - Multi Purpose Grease - Wheel Bearing BN005567 BN005561 7 Backhoe Loaders Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine G-series, J-series & K-series Recommendations Mineral Engine Oil 15W-40 Part Numbers BN005541 Extended Life Coolant - Premix 50 N or Extended Life Coolant - Premix 50 BN005608 or BN005611 Universal Tractor Fluid BN005583 Axles G-series, J-series & K-series Universal Tractor Fluid BN005583 Hydraulics G-series, J-series & K-series Mineral Engine Oil 15W-40 BN005541 Grease Grease - Super Heavy Duty BN005600 Coolant G-series, J-series & K-series Transmission G-series, J-series & K-series 8 Dozers Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine C-series & J-series Recommendations Mineral Engine Oil 15W-40 Part Numbers BN005541 Coolant C-series & J-series Extended Life Coolant - Premix 50 N BN005608 Final Drives Rollers & Idlers C-series & J-series Gear Oil Limited Slip 80W-90 BN005574 Hydrostatic Drive C-series & J-series Mineral Engine Oil 15W-40 BN005541 Hydraulics C-series & J-series Mineral Engine Oil 15W-40 BN005541 Grease General (Pin, Bushes, etc) Drive train (Bearings, Propshaft, etc) Grease - Multi Purpose Grease - Wheel Bearing BN005567 BN005561 9 Motor Graders Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine D-series & G-series Recommendations Mineral Engine Oil 15W-40 Part Numbers BN005541 Coolant D-series & G-series Extended Life Coolant - Premix 50 N BN005608 Transmission D-series & G-series Universal Tractor Fluid BN005583 Universal Tractor Fluid Universal Tractor Fluid BN005583 BN005583 Mineral Engine Oil 15W-40 BN005541 Circle Drive Box D-series & G-series Universal Tractor Fluid BN005583 Grease General (Pin, Bushes, etc) Drive train (Bearings, Propshaft, etc) Grease - Multi Purpose Grease - Wheel Bearing BN005567 BN005561 Axles Differentials, D-series & G-series Tandems, 6WD Hubs, D-series & G-series Hydraulics D-series & G-series 10 Bomag Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine Single drum roller with air cooled engine Single drum roller with water cooled engine Refuse compactors with Cummins engine Refuse compactors with Deutz water cooled engine Heavy tandem roller with Deutz water cooled engine Light tandem roller with Kubota engine Walk behind roller with Hatz engine Vibratory plates with Honda engine Recyclers with Deutz water cooled engine Recommendations Mineral Engine Oil 15W-40 Semi Synthetic Engine Oil 10W-40 Mineral Engine Oil 15W-40 Semi Synthetic Engine Oil 10W-40 Semi Synthetic Engine Oil 10W-40 Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Semi Synthetic Engine Oil 10W-40 Part Numbers BN005541 BN005545 BN005541 BN005545 BN005545 BN005541 BN005541 BN005541 BN005545 Vibration Bearing Single drum roller with air cooled engine Single drum roller with water cooled engine Heavy tandem roller with Deutz water cooled engine Light tandem roller with Kubota engine Walk behind roller with Hatz engine Vibratory plates with Honda engine Vibration Bearing vario control Semi Synthetic Engine Oil 15W-40 Semi Synthetic Engine Oil 15W-40 Semi Synthetic Engine Oil 15W-40 Semi Synthetic Engine Oil 15W-40 Semi Synthetic Engine Oil 15W-40 Semi Synthetic Engine Oil 15W-40 Manual Transmission Oil 75W90 BN005541 BN005541 BN005541 BN005541 BN005541 BN005541 BN005593 Gear Oil Limited Slip 85W-140 Gear Oil Limited Slip 85W-140 BN005586 BN005586 Axle Oil Single drum roller with air cooled engine Single drum roller with water cooled engine 11 Bomag Final Drive Recommendations Refuse compactors with Cummins engine Gear Oil Limited Slip 85W-140 Refuse compactors with Deutz water cooled engine Gear Oil Limited Slip 85W-140 Heavy tandem roller Gear Oil Limited Slip 85W-140 Hydraukic Oil Single drum roller with air cooled engine Single drum roller with water cooled engine Hydraulic Oil VG46 Hydraulic Oil VG46 Refuse compactors with Cummins engine Hydraulic Oil VG46 Refuse compactors with Deutz water cooled engine Hydraulic Oil VG46 Heavy tandem roller with Deutz water cooled engine Hydraulic Oil VG46 Light tandem roller with Kubota engine Hydraulic Oil VG46 Walk behind roller with Hatz engine Hydraulic Oil VG32 Recyclers with Deutz water cooled engine Hydraulic Oil VG46 Part Numbers BN005586 BN005586 BN005586 BN005602 BN005602 BN005602 BN005602 BN005602 BN005602 BN005605 BN005602 Coolant for all Deutz Water Cooled Engines Extended Life Coolant - Premix 50 BN005611 Grease Grease - Multi Purpose 12 BN005567 Forestry Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life. Engine Knuckle Boom Loaders Skidders Tracked Harvesters / Fellerbunchers Forwarders Wheeled Harvesters Wheeled Fellerbunchers Recommendations Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Part Numbers BN005541 BN005541 BN005541 BN005541 BN005541 BN005541 Transmission / Transfercase Skidders Forwarders Wheeled Harvesters Wheeled Fellerbunchers Universal Tractor Fluid Gear Oil Limited Slip 80W-90 Gear Oil Limited Slip 80W-90 Universal Tractor Fluid BN005583 BN005574 BN005574 BN005583 Hydraulic System Knuckle Boom Loaders Skidders Tracked Harvesters / Fellerbunchers Forwarders Wheeled Harvesters Wheeled Fellerbunchers Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Mineral Engine Oil 15W-40 Hydraulic Oil VG 68 Hydraulic Oil VG 68 Mineral Engine Oil 15W-40 BN005541 BN005541 BN005541 BN005597 BN005597 BN005541 Axles / Bogies / Final Drive / Track Drive Oil Skidders Tracked Harvesters / Fellerbunchers Forwarders Wheeled Harvesters Wheeled Fellerbunchers Universal Tractor Fluid Gear Oil Limited Slip 80W-90 Gear Oil Limited Slip 80W-90 Gear Oil Limited Slip 80W-90 Universal Tractor Fluid BN005583 BN005574 BN005574 BN005574 BN005583 13 Forestry Brake / Park Brake Skidders Forwarders Wheeled Harvesters Wheeled Fellerbunchers Recommendations Universal Tractor Fluid Universal Tractor Fluid Universal Tractor Fluid Universal Tractor Fluid Part Numbers BN005583 BN005583 BN005583 BN005583 Crane Base / Swing Drive Knuckle Boom Loaders Tracked Harvesters / Fellerbunchers Forwarders Wheeled Harvesters Gear Oil Limited Slip 80W-90 Gear Oil Limited Slip 80W-90 Gear Oil Limited Slip 80W-90 Gear Oil Limited Slip 80W-90 BN005574 BN005574 BN005574 BN005574 Pump Drive Tracked Harvesters / Fellerbunchers Wheeled Fellerbunchers Universal Tractor Fluid Universal Tractor Fluid BN005583 BN005583 Cooling System Knuckle Boom Loaders Skidders Tracked Harvesters / Fellerbunchers Forwarders Wheeled Harvesters Wheeled Fellerbunchers Extended Life Coolant - Premix 50 N Extended Life Coolant - Premix 50 N Extended Life Coolant - Premix 50 N Extended Life Coolant - Premix 50 N Extended Life Coolant - Premix 50 N Extended Life Coolant - Premix 50 N BN005608 BN005608 BN005608 BN005608 BN005608 BN005608 Grease Knuckle Boom Loaders Skidders Tracked Harvesters / Fellerbunchers Forwarders Wheeled Harvesters Wheeled Fellerbunchers Grease - Super Heavy Duty Grease - Super Heavy Duty Grease - Super Heavy Duty Grease - Super Heavy Duty Grease - Super Heavy Duty Grease - Super Heavy Duty BN005600 BN005600 BN005600 BN005600 BN005600 BN005600 Cablift / Engine Inclosure Skidders Tracked Harvesters / Fellerbunchers Forwarders Wheeled Harvesters Wheeled Fellerbunchers Universal Tractor Fluid Mineral Engine Oil 15W-40 Universal Tractor Fluid Universal Tractor Fluid Universal Tractor Fluid BN005583 BN005541 BN005583 BN005583 BN005583 Winches All Skidder Winches Universal Tractor Fluid BN005583 14 Mineral Engine Oil 15W-40 Bell Mineral Engine Oil 15W-40 is a super high performance multigrade diesel, and petrol engine oil with high quality mineral base stocks and specially developed additives. Application Product Specifications Bell Mineral Engine Oil 15W-40 is intended for all naturally aspirated and turbocharged petrol and diesel engines operating under the API service conditions described below. - ACEA A3, B3, E3-96 & E5-02 - MAN 3275 - EO-M Plus - Mercedes-Benz 228.3 - API CI-4 & SL - Mack EO-M plus - Cummins CES 20077/78 - Volvo VDS-3 - MTU Type 2 - Caterpillar ECF-1 The enhanced detergency and dispersancy of Bell Mineral Engine Oil 15W-40 enables it to remove preexisting sludge and other deposits from engines that have operated on other oils. An early oil and filter change is therefore recommended for the initial fill when switching to this oil. The superior lubricating properties of Bell Mineral Engine Oil 15W-40 can retard the bedding-in of new components and it is not recommended for use during the running-in phase of new or rebuilt engines. Features & Benefits Bell Engine Oil Multigrade 15W-40 has the following features and benefits: - excellent oxidation stability - enhanced high and low temperature dispersancy and detergency - outstanding anti-sludging properties - very good cold starting ability - good fuel saving properties Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s 14.5 @ 40°C mm2/s110 Apparent Viscosity mPa.s @ -15°C 3000 D5293 Viscosity Index 135 D2270 226 Pour Point °C -23 D97 15 Flash Point (COC) °C 220 D92 36 Evaporative Loss (Noack)% m/m 12 CEC L-40-T-87 or DIN 51581 Density @ 20°C kg/m3 890D4052365 Sulphated Ash % m/m 1.4 D874163 Total Base Number mg KOH/g 11 D2896276 Pack Size Part Number 5LBN005543 Pack Size Part Number 20LBN005542 Pack Size Part Number 210LBN005541 15 Semi Synthetic Engine Oil 10W-40 Bell Semi Synthetic Engine Oil 10W-40 is a semi synthetic multigrade engine oil formulated to protect latest technology petrol and diesel engines including engines equipped with exhaust gas recirculation (EGR) systems. The oil is designed to enable advanced engine technology to meet strict exhaust emission standards. Each component of the oil has been individually selected to provide superior engine protection and enable ultimate engine performance. Application Product Specifications Bell Semi Synthetic Engine Oil 10W-40 is designed to prolong the life of heavy-duty, high-speed diesel and petrol engines operating under severe service conditions. - API CI-4/CF, SL - RXD/ RLD-2 - ACEA E7-04 Issue 2, E4-07 - CES 20077 / 78 - Mercedes-Benz 228.5 - Mack EO-M+ - Volvo VDS-3 - MTU Type 3 - MAN 3277 The superior lubricating properties of Bell Semi Synthetic Engine Oil 10W-40 can retard the bedding-in of new components and it is not recommended for use during the running-in phase of new or rebuilt engines. Features & Benefits Bell Semi Synthetic Engine Oil 10W-40 provides improved oxidation resistance, improved deposit protection and better wear protection while ensuring energy conservation. Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s14 @ 40°C mm2/s100 Apparent Viscosity mPa.s @ -25°C 6200 D5293 Flash Point (COC) °C 195 D9236 870 D4052365 Density @ 15°C kg/m3 Sulphated Ash % m/m 1,0 D874163 Total Base Number mg KOH/g 12 D2896276 Pack Size Part Number 5LBN005547 16 Pack Size Part Number 20LBN005546 Pack Size Part Number 210LBN005545 Engine Run-in Oil 15W-40 Bell Run-In Oil 15W-40 is a multi-grade internal combustion engine oil formulated from quality base stocks and additives. Application Product Specifications Bell Run-In Oil 15W-40 is intended for all naturally aspirated and turbocharged petrol and diesel engines operating under the API service conditions described below. - API: SF/CC, CF Bell Run-In Oil 15W-40 is recommended for use during the run-in phase of new or rebuilt engines. Bell Run-In Oil 15W-40 enables the bedding-in of new components. Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Features & Benefits Avoid temperatures above 80°C and strong oxidizing agents. Bell Run-in Oil 15W-40 has the following features and benefits: - Enables running-in phase of new or re-built engines - Very good cold starting ability - Good fuel saving properties Storage & Handling Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s 14,1 @ 40°C mm2/s103 Apparent Viscosity mPa.s @ -15°C 3390 D5293 Viscosity Index 125 D2270226 Pour Point °C -30 D9715 Flash Point (COC) °C 220 D9236 Evaporative Loss (Noack) % m/m 12 CEC L-40-T-87 or DIN 51581 883 D4052365 Density @ 20°C kg/m3 Total Base Number mg KOH/g 10 D2896276 Pack Size Part Number 5LBN005748 Pack Size Part Number 20LBN005767 Pack Size Part Number 210LBN005766 17 Automatic Transmission Oil Bell Automatic Transmission Oil is a synthetic fluid designed to meet the demanding requirements of modern heavy duty automatic transmissions. Application Product Specifications Bell Automatic Transmission Oil is recommended for use in modern high performance trucks, buses, utility vehicles, haulers, vans and other equipment requiring Allison TES 295 performance level. Meets the Allison TES 295 specification. Features & Benefits Bell Automatic Transmission oil has been formulated to exceed the original TES 295 specification: - Excellent seal compatibility - Stringent cold - Increased durability - Protects against thermal breakdown at high temperatures while still providing outstanding performance at ambient temperatures as low as -54 °C. - It offers outstanding gear shifting and power transfer performance. Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 60°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM Density @ 20°C kg/l 0.85 ASTM 4052 Viscosity @ 100°C cSt 7 ASTM D445 @ 40°C cSt 39 ASTM D445 @-40°C cP 8 400 ASTM D2983 Viscosity Index 168 Pour Point °C -54 ASTM D97 Flash Point (COC) °C 235 Colour GoldVisual Pack Size Part Number 5LBN005550 18 Pack Size Part Number 20LBN005549 Pack Size Part Number 210LBN005548 Manual Transmission Oil Bell Synthetic Manual Transmission Oil 75W-90 is a fully-synthetic, multi-grade gear oil designed for use in gearboxes and differentials operating under a wide range of ambient temperatures. Application Product Specifications Bell Synthetic Manual Transmission Oil 75W-90 is intended for most heavy duty and passenger cars differentials requiring API GL4/ GL5 or MT1 level of extreme pressure protection. - API GL-4 - Arvin Meritor 0-76-N - API GL-5 / MT1 - MAN M 3343 Type S -MIL-PRF-2105E - Scania STO 1:0 - MB-Approval 235.8 - Volvo 97310/97312 - Mack GO-J - ZF TE-ML 02B, 05B, 07A, 08, 12B, 16F, 17B, 19C Features & Benefits Bell Synthetic Manual Transmission Oil 75W90 exceeds both API GL-4 and GL-5 gear oil requirements with enhanced features and benefits such as: - Retention of full lubrication characteristics down to temperatures of -40°C - Enhanced thermal stability with resultant longer drain interval capabilities and improved component cleanliness even under severe operating conditions - Outstanding shear stability - Excellent high temperature gear score performance with resultant longer differential service life - Better fuel consumption especially during low temperature operation Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s 15.3 @ 40°C mm2/s104 @ -40°C mPa/s 100 000 D2983 Pour Point °C -57 D9715 Flash Point °C 180 D9236 868 D4052365 Density @ 20°C Kg/m3 Pack Size Part Number 5LBN005548 Pack Size Part Number 20LBN005593 Pack Size Part Number 210LBN005592 19 Torque Fluid 434 Bell Torque Fluid 434 is a multipurpose gear and transmission oil whose viscosity is equivalent to SAE 30 oil. It can be used in many drive train applications and is specially formulated for good chatter suppression, low temperature performance & anti-foam properties. Application Product Specifications Bell Torque Fluid 434 can be used for the following applications where the grade is specified: - Allison C-3 & C-4 - Sperry Vickers M-2950-S - API CF & CF-2 - ZF TE-ML-03 & 04* (both) - Caterpillar TO-4 - hydraulic systems - heavy duty drive train and hydraulic systems - torque converters - gear units of certain commercial and construction vehicles Features & Benefits Bell Torque Fluid 434 is specifically formulated to meet Caterpillar’s TO-4 specification for transmission/drive train oils (TDTO). Bell Torque Fluid 434 meets the API CF specification requirements. Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s12 @ 40°C mm2/s108 Viscosity Index 94 D2270226 Pour Point °C -18 D9715 Flash Point (COC) °C 240 D9236 897 D4052365 Density @ 20°C kg/m3 Pack Size Part Number 5LBN005591 20 Pack Size Part Number 20LBN005590 Pack Size Part Number 210LBN005589 Hydraulic Oil VHVI Bell Hydraulic Oil VHVI is formulated from solvent refined base oils, viscosity index improvers, foam and oxidation-resistant fluid having frictional characteristics suitable for automatic transmissions designed to use Type G and Type F automatic transmission fluids and Ford specification ESW-M2C 33-G fluids. Bell Hydraulic Oil VHVI is dyed red like any other ATF fluid. Application Product Specifications Bell Hydraulic Oil VHVI is intended for the following components of many commercial vehicles and offhighway equipment: - heavy-duty transmissions - power steering systems - hydraulic and hydrostatic systems where Allison C-3 or C-4 fluid is recommended - Allison C-4 - Denison HF-0 - Ford ESW-M2C 33-G - MB 236.1 - General Motors Type F and G - ZF TE-ML-09,11& 14 - Caterpillar T0-2 -Voith Do NOT use in systems with silver-coated bearings Storage & Handling Features & Benefits This product is used primarily for some commercial transmissions and certain manual gearboxes and power steering units. Bell Hydraulic Oil VHVI is recommended for the automatic transmissions of Ford and other vehicles such as Leyland, Mazda, Volvo and older Toyota models. Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity 8.2 D44571 @ 100°C mm2/s 39 D44571 @ 40°C mm2/s @ -18°C cP 1400 D2983 Viscosity Index 190 D2270226 Pour Point °C -40 D9715 Flash Point (COC) °C 210 D9236 Cu Corrosion (3h @ 100°C) 1b D130154 Rust Protection Visual Pass D665 B 135 B 878 D4052365 Density @ 20°C kg/m3 Pack Size Part Number 5LBN005558 Pack Size Part Number 20LBN005557 Pack Size Part Number 210LBN005556 21 Hydraulic Oil VG 32 Bell Hydraulic Oil 32 is a quality, rust and oxidation-inhibited oil having anti-foam properties. It contains an anti-wear additive that combines the functions of lubricating and hydraulic oils in a single product. Application Product Specifications Bell Hydraulic Oil VG 32 is intended for: - Atlas Copco ECB 573/8 - General Motors LH-04-1 & LH-06-1 - Cetop RP 91G Category HM - Lee-Norse 100-1 - Cincinnati Milacron P-68, P-69 & P-70, - U.S. Steel 127 & 136 - P75A, P75B & P75C - Voest-Alpine - Miners - David Brown 0A, 1A, 2A, 3A - Ford M-6C32B - Denison HF-0, HF-1 & HF-2 - 51524 Part 2 - Sperry Vickers I-286-S & M-2950-S - hydraulic systems - lightly to moderately loaded spur and bevel gears - compressors (including certain rotary and other compressors) - machine tool and other bearings - industrial torque converters - hydraulic couplings Features & Benefits Bell Hydraulic Oil VG 32 can be used in the hydraulic systems of automotive and earthmoving equipment wherever SAE 10W engine oils are normally specified or preferred due to local conditions Bell Hydraulic Oils can be used to good advantage in rotary sliding vane pumps where vane sticking is experienced with other lubricants Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s5 @ 40°C mm2/s30 Viscosity Index 100 D2270226 Pour Point °C -18 D9715 Flash Point (COC) °C 210 D9236 872 D1298160 Density @ 20°C kg/m3 Load Carrying Capacity Stage 11 Anti-wear Characteristics mg loss 30 D2882 Pack Size Part Number 5LBN005607 22 Pack Size Part Number 20LBN005606 Pack Size Part Number 210LBN005605 Hydraulic Oil VG 46 Bell Hydraulic Oil VG 46 is a high quality, rust and oxidation-inhibited oil having anti-foam properties. It contains an anti-wear additive that combines the functions of lubricating and hydraulic oils in a single product. Application Product Specifications Bell Hydraulic Oil VG 46 is intended for: - Atlas Copco ECB 573/8 - General Motors LH-04-1 & LH-06-1 - Cetop RP 91G Category HM - Lee-Norse 100-1 - Cincinnati Milacron P-68, P-69 & P-70, - U.S. Steel 127 & 136 - P75A, P75B & P75C - Voest-Alpine - Miners - David Brown 0A, 1A, 2A, 3A - Ford M-6C32B - Denison HF-0, HF-1 & HF-2 - 51524 Part 2 - hydraulic systems - lightly to moderately loaded spur and bevel gears - compressors (including certain rotary and other compressors) - machine tool and other bearings - industrial torque converters - hydraulic couplings Do NOT use in systems with silver-coated bearings Features & Benefits Bell Hydraulic Oil 46 can be used in the hydraulic systems of automotive and earthmoving equipment wherever SAE 15W engine oils are normally specified or preferred due to local conditions Bell Hydraulic Oils can be used to good advantage in rotary sliding vane pumps where vane sticking is experienced with other lubricants. Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s7 @ 40°C mm2/s47 Viscosity Index 105 D2270226 Pour Point °C -15 D9715 Flash Point (COC) °C 225 D9236 875 D1298160 Density @ 20°C kg/m3 Load Carrying Capacity Stage 11 Anti-wear Characteristics mg loss 30 D2882 Pack Size Part Number 5LBN005604 Pack Size Part Number 20LBN005603 Pack Size Part Number 210LBN005602 23 Hydraulic Oil VG 68 Bell Hydraulic Oil VG 68 is a high quality, rust and oxidation-inhibited oil with very high viscosity index and excellent anti-rust, anti-oxidation and anti-foam properties. It contains anti-wear additives and combines the functions of lubricating and hydraulic oils in a single product. Application Product Specifications Bell Hydraulic Oil VG 68 can be used under widely varying temperature conditions and is therefore suitable for: - Atlas Copco ECB 573/8 - General Motors LH-06-1 - Cetop RP 91G Category HM - Lee-Norse 100-1 - Cincinnati Milacron P-69 & P75C - U.S. Steel 127 & 136 - David Brown 0A, 1A, 2A, 3A - Voest-Alpine - Miners - Denison HF-0, HF-1 & HF-2 - Ford M-6C32B - 51524 Part 2 - Sperry Vickers I-286-S & M-2950-S - Forklifts moving regularly into and out of cold storage areas. - Exhaust turbine bearings. - Hydraulic hatch covers aboard ships. - Machine tool copying attachments and other equipment where only small viscosity variations can be tolerated. - Other applications where the effects of widely ranging operating temperatures on viscosity must be minimized. Do NOT use in systems with silver-coated bearings Features & Benefits Bell Hydraulic Oil VG 68 can be used to good advantage in rotary sliding vane pumps where vane sticking is experienced with other lubricants. Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 12 @ 100°C mm2/s @ 40°C mm2/s70 Viscosity Index 165 D2270226 Pour Point °C -36 D9715 Flash Point (COC) °C 230 D9236 880 D4052365 Density @ 20°C kg/m3 Load Carrying Capacity (FZG) Stage 11334 Anti-wear Characteristics mg loss 30 D2882 Pack Size Part Number 5LBN005599 24 Pack Size Part Number 20LBN005598 Pack Size Part Number 210LBN005597 Universal Tractor Fluid Bell Universal Tractor Fluid is a multipurpose gear and transmission oil with a viscosity equivalent to that of an SAE 20W engine oil. Application Product Specifications Bell Universal Tractor Fluid is intended for: - Allison C-3 & C-4 - John Deere J20C - API GL-4 - Massey Ferguson M1110 - M1145 - Caterpillar TO-2 - ZF (Tractors) TE-ML-03E, 05F, -06 Ford M2C134 - A/B/C/D; M2C86 - B/C - JI Case MS 1204 to MS 1210 - B6 - New Holland: FNHA-2-C-210.00 - tractor transmissions and hydraulic systems - differentials equipped with wet brakes - drive train systems - torque converters - gear units of certain commercial and construction vehicles Features & Benefits Bell Universal Tractor Fluid can serve as a replacement for all oils, other than engine oil, used in agricultural tractors. This type of oil is sometimes also referred to as Universal Tractor Transmission Oil or UTTO. Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. It can be used in wet brake and many drive train applications and is specially formulated for good: Avoid temperatures above 80°C and strong oxidizing agents. - chatter suppression - low temperature performance - anti-foam properties Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s9.7 @ 40°C mm2/s65 Viscosity Index 157 D2270226 Pour Point °C -36 D9715 Flash Point (COC) °C 240 D9236 889 D4052365 Density @ 20°C kg/m3 Pack Size Part Number 5LBN005585 Pack Size Part Number 20LBN005584 Pack Size Part Number 210LBN005583 25 Gear Oil 85W-140 Bell Gear Oil 85W-140 is a sulphur/phosphorus type, multipurpose, extreme pressure mineral gear oil with high load-carrying properties. Application Product Specifications Bell Gear Oil 85W-140 has been developed for: - API GL-5 - U.S. MIL-L-2105D - SABS CKS 74 - ZF TE-ML-01, 05, 07 - Spiral bevel and moderately offset hypoid axles operating under various combinations of high speed, low speed, high torque and shock load service conditions. - Transmissions of automotive equipment operating under the API service conditions quoted below. Features & Benefits Bell Gear Oil 85W-140 is NOT recommended for automotive synchromesh gearboxes or final drives where GL-4 oils with milder extreme pressure properties are recommended. Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s29 @ 40°C mm2/s420 Apparent Viscosity of 150 Pa.s °C -12 D2983 Viscosity Index 100 D2270226 Pour Point °C -18 D9715 Flash Point (COC) °C 220 D9236 Load Carrying Capacity (FZG) kg >30 D2782240 908 D4052365 Density @ 20°C kg/m3 Pack Size Part Number 5LBN005554 26 Pack Size Part Number 20LBN005553 Pack Size Part Number 210LBN005552 Gear Oil Limited Slip 80W-90 Bell Gear Oil Limited Slip 80W-90 is a premium quality, multipurpose gear lubricant containing sulphurphosphorus EP additives developed to meet the rigorous demands of commercial-fleet manual transmissions, drive axles and final drives. Application Product Specifications This product is also suitable for similar components of farm and earth moving equipment and passenger cars. When properly applied at the intervals recommended by car manufacturers, this oil complies with new car warranty requirements. - API GL-5 LS - ZF TE-ML 05C - ZF TE-ML 12C - ZF TE-ML 16E - Arvin Meritor Axles Bell Gear Oil Limited Slip 80W-90 is recommended for smooth efficient operation of limited slip (LS) differentials. Storage & Handling Features & Benefits Bell Gear Oil Limited Slip 80W-90 has the following features and benefits: - Resistance to high temperature oxidation - Multipurpose capability minimizes misapplication - Protection against wear and scoring under all operating conditions including high torque - shock loading - Protection against rust and corrosion in wet operating conditions Bell Gear Oil Limited Slip 80W-90 is suitable for initial fill, top-up and refill of manual gearboxes, gear-cases of semi-automatic transmission where EP gear oils are recommended, as well as drive axles and final drives of passenger cars, bakkies trucks and earth moving, mine and farm equipment. Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. The exceptional chemical and thermal stability of this oil permit its use at intermittent bulk oil temperatures up to 150°C will appropriate drain and refill schedules. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s15 @ 40°C mm2/s145 Apparent Viscosity of 150 Pa.s °C -24 D2983 Viscosity Index 105 D2270226 Pour Point °C -30 D9715 Flash Point (COC) °C 205 D9236 Load Carrying Capacity (FZG) kg >25 D2782240 893 D4052365 Density @ 20°C kg/m3 Pack Size Part Number 5LBN005576 Pack Size Part Number 20LBN005575 Pack Size Part Number 210LBN005574 27 Gear Oil Limited Slip 85W-140 Bell Gear Oil Limited Slip 85W-140 is a premium quality, multipurpose gear lubricant containing sulphur-phosphorus EP additives developed to meet the rigorous demands of commercial-fleet manual transmissions, drive axles and final drives. Application Product Specifications This product is also suitable for similar components of farm and earth moving equipment and passenger cars. When properly applied at the intervals recommended by car manufacturers, this oil complies with new car warranty requirements. - API GL-5 LS - ZF TE-ML 05C - ZF TE-ML 12C - ZF TE-ML 16E - Arvin Meritor Axles Bell Gear Oil Limited Slip 85W-140 is recommended for smooth efficient operation of limited slip (LS) differentials Storage & Handling Features & Benefits Bell Gear Oil Limited Slip 85W-140 has the following features and benefits: - Resistance to high temperature oxidation - Multipurpose capability minimizes misapplication - Protection against wear and scoring under all operating conditions including high torque - shock loading - Protection against rust and corrosion in wet operating conditions Bell Gear Oil Limited Slip 85W-140 is suitable for initial fill, top-up and refill of manual gearboxes, gearcases of semi-automatic transmission where EP gear oils are recommended, as well as drive axles and final drives of passenger cars, bakkies trucks and earth moving, mine and farm equipment. Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. The exceptional chemical and thermal stability of this oil permit its use at intermittent bulk oil temperatures up to 150°C will appropriate drain and refill schedules. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 40°C mm2/s310 @ 100°C mm2/s29 Viscosity Index VI 97 D2270226 Pour Point, max °C -18 D9715 Timken OK Load kg 18 Pack Size Part Number 5LBN005588 28 Pack Size Part Number 20LBN005587 Pack Size Part Number 210LBN005586 Borate Oil Bell Borate Transmission Oil is a multipurpose gear and transmission oil with borate-enhanced EP properties. The special borate-based additive provides additional protection of gears against wear (scoring, pitting, ridging, rippling), optimum friction coefficient as well as protection of the synchronizer ring against wear. Application Product Specifications Bell Borate Oil is intended for: - Allison C-3 & C-4 - MASSEY FERGUSON M1110, - Ford M2C134-A/B/C/D - API GL-4 - M1127, M1129A, M1135, M1141, M1143 - -RENAULT - Caterpillar TO-2 - KUBOTA, DEUTZ, FIAT - NEW HOLLAND: FNHA-2-C-210.00 - White Farm Q-1826 - John Deere J20C - JJ Case MS 1207, MS 1210 -B6 - tractor transmissions and hydraulic systems - differentials equipped with wet brakes - drive train systems - take-off clutches - torque converters - gear units of certain commercial and construction vehicles Features & Benefits The Bell Borate Oil can serve as a replacement for all oils, other than engine oil, used in agricultural tractors. It can be used in wet brake and many drive train applications and is specially formulated for good: - chatter suppression - low temperature performance - anti-foam properties Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Viscosity D44571 @ 100°C mm2/s 14,76 99.84 @ 40°C mm2/s Viscosity Index 154 D2270226 Pour Point °C -30 D9715 Flash Point (COC) °C 230 D9236 888 D4052365 Density @ 20°C kg/m3 Pack Size Part Number 5LBN005581 Pack Size Part Number 20LBN005580 Pack Size Part Number 210LBN005579 29 Brake Fluid The Bell Brake Fluid DOT 4 complies with the National Compulsory Standard Specification for Hydraulic Brake Fluids. Application Product Specifications - The DOT 4 product is intended for systems where operating temperatures can rise to above 260°C but will not exceed 270°C - The grade number allocated to this product reflects the maximum permissible operating temperature - This grade is a heavy duty product and is equally suitable for hydraulic clutch systems where operating temperatures are generally below those in brake systems - SABS VC 8013 - SAE J1703, J1704 - ISO 4925 - U.S. Federal FMVSS No. 116 DOT 4 Features & Benefits - Bell Brake Fluid DOT 4 is not a mineral oil, but somewhat toxic hydraulic fluids, blended from glycols and selected additives. Skin and eye contact should be avoided. If swallowed obtain medical assistance. Avoid spillage onto vehicle paintwork which can be damaged if left in contact with the product. - The fluid is fully compatible with the natural rubber seals of automotive brake systems. - The product is hygroscopic (absorb water) and should be replaced annually, especially in coastal areas, to prevent rusting of components and possible brake failure due to water vapour in the system. Containers must be kept tightly sealed. Storage & Handling Use PVC, nitrile or other product-resistant gloves and protective clothing in cases where frequent or prolonged skin contact cannot be avoided. Where eye contact is a potential hazard, goggles or face shields should be worn. Respiratory protection is not normally required but if an inhalation risk is present wear a half-mask respirator with an approved organic vapour cartridge and particulate filter. Avoid elevated temperatures exceeding 100°C and contact with mineral oils, water and other fluids Lined tanks should NOT be used for storage. Ambient temperatures and atmospheric pressures normally encountered within buildings are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM IP Dry Equilibrium Reflux Boiling Point °C 270 4.1 Wet Equilibrium Reflux Boiling Point °C 170 D4454.3 D4454.4 Kinematic Viscosity mm2/s @ 100°C 2,3 D2983 @ -40°C 1100 D2270 Neutrality pH 8,0 D974.5 Pack Size Part Number 5LBN005559 30 Extended Life Coolant - Premix 50 Bell Extended Life Coolant Premix 50 is a nitrite-, amine-, phosphate-, silicate-, and borate-free coolant based on ethylene glycol. Product Specifications Application Bell Extended Life Coolant - Premix 50 gives outstanding protection against frost, corrosion and overheating in all modern engines, but especially highly loaded aluminium engines. It effectively protects against corrosion and deposits in the cooling system with its vital parts, the coolant channels in the block and cylinder head, the radiator, the water pump and the heater core. Features & Benefits It is recommended that the antifreeze in a cooling system be replaced annually. Before a cooling system is filled with Bell Extended Life Coolant - Premix 50 it should be drained and thoroughly flushed with clean water. Do not top up with plain water but use the same product as used for the initial fill. DO NOT MIX DIFFERENT BRANDS OF ANTIFREEZE. - ADE Antifreeze & Corrosion Inhibitors - Opel - Meets Requirements - Afnor - Meets Requirements - Porsche - Meets Requirements - BMW - Meets Requirements - SAAB - Meets Requirements - British Standard BS 6580 - SABS 1251 - General Motors - Meets Requirements - Sasol S194 - MAN - Meets Requirements - Volkswagen TL 774 - Mercedes-Benz 325.3 - Volvo - Meets Requirements Storage & Handling Keep container tightly closed in a dry and cool place. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Bell Extended Life Coolant - Premix 50 has a shelflife of at least three years when stored in originally closed, airtight containers at temperatures of maximum 30oC. For containers or container linings, use carbon steel or stainless steel. Do not use Galvanized containers because they may corrode. Typical Characteristics Property Units TypicalASTM Appearance @ 20°C Clear Complies Visual Hard Water Stability after 10 days stable, no precipitation Complies VW-PV 1426 Density @ 20°C g/cm3 1,122 - 1,125 ASTM D1122 pH Value 8,2 - 8,6 ASTM D1287 Refractive Index @ 20°C 1,432 - 1,436 DIN 51 423/2 Reserve Alkalinity ml, 0,1N HCL 8 - 11 ml ASTM D1287 Flash Point (COC) °C > 120 ASTM D92 Boiling Point °C > 160 ASTM D1120 Water Content % v/v 3,0 % max ASTM D1123 Corrosion Test: mg D1384 o Copper -0,8* o Solder -1,2* o Brass -0.9* o Steel +0,1 o Cast Iron +1,3 Pack Size Part Number 5LBN005613 Pack Size Part Number 20LBN005612 Pack Size Part Number 210LBN005611 31 Extended Life Coolant - Premix 50 N Bell Extended Life Coolant - Premix 50 N is an engine coolant concentrate based on ethylene glycol. It contains a hybrid corrosion inhibitor package with nitrites, salts of organic acids and silicates. Bell Extended Life Coolant Premix 50 N is free from amines and phosphates. Application Product Specifications Bell Extended Life Coolant - Premix 50 N was developed to protect car, truck and bus engines of both ferrous and aluminium construction against corrosion and frost damage. It is recommended as a year-round cooling system additive for all water-cooled internal combustion engines. It offers protection against: - damage as a result of coolant freezing during inclement weather - corrosion of the radiator, engine and other component surfaces exposed to the coolant - deposit formation that occurs when poor quality water is used, as Bell Extended Life Coolant Premix 50 N is premixed with treated water Features & Benefits Bell Extended Life Coolant - Premix 50 N contains a blend of inhibitors designed to give a high degree of corrosion protection to engine components such as radiators, cylinder block/heads and water pumps. Due to its nitrite content this product is especially recommended for use in heavy duty engines. It is recommended that the antifreeze in a cooling system be replaced annually. Before a cooling system is filled with Bell Extended Life Coolant Premix 50 N it should be drained and thoroughly flushed with clean water. Do not top up with plain water but use the same product as used for the initial fill. DO NOT MIX DIFFERENT BRANDS OF ANTIFREEZE. Bell Extended Life Coolant Pre-mix 50 N meets the requirements of both the ASTM D3306 and BS 6580:1992 - standards. Bell Extended Life Coolant Premix 50 N also carries the following approvals: - Mercedes-Benz - DBL 7700.20, page 325.0 - John Deere - JDM H24 - MTU - MTL 5048 - Leyland - BLS 22 AF.01 - Ford North America -WSS-M97B51-A1 - Chrysler -MS-9769 Storage & Handling Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Avoid temperatures above 80°C and strong oxidizing agents. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units TypicalASTM Appearance @ 20°C Clear Complies Visual Visual Hard Water Compatibility stable, no precipitationComplies 1,131 - 1,133 ASTM D1122 Density @ 20°C g/cm3 pH Value 7,57 ASTM D1287 Refractive Index @ 20°C nD 1,435 - 1,438 DIN 51 423/2 Reserve Alkalinity, ml, 0,1N HCL 15 - 19 ml ASTM D1287 Flash Point (COC) °C > 120 ASTM D92 Boiling Point °C > 160 ASTM D1120 Freezing Point (50% vol. in water) °C <-37 ASTM D 1177 Water Content % v/v 3,0 % max ASTM D1123 Ash Content % m/m 2,0 % max ASTM D1119 50 max ASTM D1881 Foaming characteristics m/ 3 s Corrosion Test: mg D1384 o Copper 0,0 o Solder -0.3* o Brass 0.6 o Steel -0.3* o Cast Iron 0.6 o Aluminium -2,4* Pack Size Part Number 5LBN005610 32 Pack Size Part Number 20LBN005609 Pack Size Part Number 210LBN005608 Grease - Multi Purpose Bell Multi Purpose EP-2 is a dark-brown, multi purpose, extreme pressure, rust-inhibited, lithium hydroxystearate based grease. Application Product Specifications Bell Multi Purpose EP 2 grease can be used wherever an extreme pressure grease of this type and grade is required or preferred and is recommended for the long term lubrication of equipment operating within a temperature range of -15°C to 120°C. Some of its usages include: - Brenco - Meets requirements - Nsk - Meets requirements - Rhp - Meets requirements - Fag - Meets requirements - Ntn - Meets requirements - Skf - Meets requirements - Koyo - Meets requirements - Timken - 2891 & 5492 - general purpose automotive and chassis applications - machine tool applications - industrial antifriction and plain bearings Bell Multi Purpose EP 2 grease should be used with caution in automotive wheel bearings where peak operating temperatures may exceed 120°C due to heat transfer from adjacent disc brakes. Storage & Handling Use PVC, nitrile or other product-resistant gloves and protective clothing in cases where frequent or prolonged skin contact cannot be avoided. Where eye contact is a potential hazard, goggles or face shields should be worn. Respiratory protection is not normally required under normal conditions. Avoid elevated temperatures and contact with water and other fluids. Do not store in open containers. Ambient temperatures and atmospheric pressures normally encountered within buildings are acceptable. Typical Characteristics Property Units Worked Penetration 0,1 mm Drop Point °C, min NLGI Load Carrying Capacity (FZG) Kg, min TypicalASTM IP 280 D21750 187 D566132 2 27 D2509240 Base Oil Properties (virgin): 240 D44571 Viscosity @ 40°C mm2/s Operating temperature, max °C -15 to +120 Flash Point (COC) °C 220 D9236 Pack Size Part Number 5LBN005768 Pack Size Part Number 20LBN005568 Pack Size Part Number 210LBN005567 33 Grease - Super Heavy Duty Bell Super Heavy Duty grease is a high performance multi-purpose grease containing solid lubricants. It is manufactured from solvent refined oils and it incorporates multi-functional extreme pressure additives as well as rust/corrosion inhibitors, anti-oxidation additives and molybdenum disulphide. Its service temperature range is between -30°C and 130°C. Application Product Specifications It is recommended for the long term lubrication of industrial and automotive equipment where heavy loading and/or shock loads are encountered and can be used for: - General purpose automotive and chassis applications including fifth wheels, kingpins, steering and universal joints. - Bulldozers, front-end loaders and other construction equipment. - Mining equipment. - Other applications include Constant velocity joints (CVJ), machine tools, geared couplings at normal speeds, vibrating shafts and sliding mechanisms. Features & Benefits Bell Super Heavy Duty Grease provides emergencyrun properties because of its molybdenum disulphide content, which plates out onto metal surfaces to form a solid lubricating film that reduces friction and wear between lengthy re-greasing intervals. - SABS VC 300 Storage & Handling Use PVC, nitrile or other product-resistant gloves and protective clothing in cases where frequent or prolonged skin contact cannot be avoided.Where eye contact is a potential hazard, goggles or face shields should be worn. Respiratory protection is not normally required under normal conditions. Avoid elevated temperatures and contact with water and other fluids. Do not store in open containers. Ambient temperatures and atmospheric pressures normally encountered within buildings are acceptable. Typical Characteristics Property Units TypicalASTM IP Worked Penetration 0,1 mm 280 D21750 Drop Point °C 180 D566132 Water Washout @ 38°C % m/m 5 D1264 Working Stability (Pen.Change) % 10 D21750 Timken OK Load kg 33 Base Oil Properties (virgin): Viscosity D44571 @ 40°C mm2/s 350 Molybdenum Disulphide % m/m % m/m 3 Colour, visual Grey Operating temperature range, °C °C -15 to 130 Pack Size Part Number 15KGBN005601 34 Pack Size Part Number 50KGBN005600 Grease - Wheel Bearing Bell Wheel Bearing is a multi-purpose lithium complex based grease developed for high temperature and long-term performance in industrial and automotive applications. The grease possesses good fretting corrosion protection, good water tolerance, resistance to water wash-out, and reliable corrosion protection combined with excellent mechanical stability and good load-carrying capabilities. It contains EP, Rust and Anti-oxidant additives. Bell Wheel Bearing grease has a wide operating temperature range, -20°C and +150°C. Application Storage & Handling This product is suitable for grease-lubricated bearings at low and high speeds including electric motors, automotive bearings and various antifriction bearings in the mining, petrochemical, construction and steel industries. Avoid elevated temperatures (exceeding 100°C) and contact with water and other fluids. Do not store in open or unlabelled containers. It has good pumpability properties and can be used in centralized lubrication systems Store away from strong oxidising agents or combustible material. Features & Benefits Some of the benefits are: - Good high temperature stability - Extreme pressure capability - Resistance to water washout - Excellent rust and corrosion protection - Long service life Typical Characteristics Property Units Typical ASTMIP Worked Penetration 0,1 mm 265-295 D21750 Drop Point °C, min >240 D566132 NLGI 2 Timken O.K. Load, min Kg, >27 Colour, Visual Brown Base Oil Properties (virgin): 200 D44571 Viscosity @ 40°C mm2/s Operating temperature, max °C 150 Pack Size Part Number 15KGBN005563 Pack Size Part Number 50KGBN005561 35 Grease - High Temperature Bell High Temperature Synthetic Grease is a high temperature grease based on fully-synthetic esters and hydrocarbons and a non-melting thickener system. It has excellent high temperature performance and oxidation stability. It allows for the long-term lubrication of journal bearings and anti-friction bearings at high working temperatures, high bearing loads and aggressive environmental conditions. Application Storage & Handling Bell High Temperature Synthetic grease is recommended for lubrication of: Avoid elevated temperatures (exceeding 100°C) and contact with water and other fluids. Do not store in open or unlabelled containers. - Journal and anti-friction bearings in high temperature applications - Fan bearings at the hot air stream - Re-heat and dry ovens - Bearings exposed to hot and cold water as well as steam Store away from strong oxidising agents or combustible material. Features & Benefits Bell High Temperature Synthetic grease has the following features and benefits: - Good oxidation and thermal stability - Excellent rust and corrosion protection - Extended lubrication intervals and equipment life - It also offers excellent mechanical stability Typical Characteristics Property Units TypicalASTM IP Colour VisualYellowish-white Worked Penetration 0,1 mm 280 D21750 Drop Point °C, min none D566132 NLGI 2 Base Oil Properties (virgin): D44571 Viscosity @ 40°C mm2/s Operating temperature, max °C -20 to +220 Pack Size Part Number 0.5KGBN005771 36 Pack Size Part Number 5KGBN005770 Cutter Bar Oil Bell Cutter Bar Oil is formulated to meet the special requirements of cutter bar lubrication. Application Storage & Handling The combination of medium viscosity oil, tackiness, and anti-wear additives provide excellent performance and wear protection. Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn.Avoid temperatures above 80°C and strong oxidizing agents. Features & Benefits Bell Cutter Bar Oil adheres strongly to metal surfaces due to its tacky nature and resists being flung off from the cutter bar during operation. Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Viscosity @ 40°C Flash point (COC) Pour Point °C Pack Size Part Number 5LBN005619 Units cSt °C °C Pack Size TypicalASTM 150 D445 252 D93 -18 D97 Part Number 20LBN005618 Pack Size Part Number 210LBN005617 37 Machining Fluid Bell Machining Fluid is a water-soluble metal working fluid for all cutting operations. The new biobalanced concept allows a nearly unlimited sump-life on the microbiological aspect and no addition of bactericides and fungicides are necessary. Through the usage of a new specially developed anti-foaming system this water-soluble metal working fluid is especially suited for the application where the water hardness is low or very low. Bell Machining Fluid is free of secondary amines, secondary amines releaser, nitrite, nitrite releaser, organic chloride compounds, formaldehyde, formaldehyde releaser, PCB, PCT, PTBB and heavy metals. Application Storage & Handling Bell Machining Fluid is a universal product for all cutting operations such as: milling, drilling, turning. It is resistant to hard water and has low tendency to foam formation when used in soft water. Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact. Where eye contact is a potential hazard, goggles should be worn. Features & Benefits Avoid temperatures above 80°C and strong oxidizing agents. - Excellent cutting performance - Skin friendly due to a balanced pH-range (8.6 - 9.0) - No foaming even in very soft water - Due to a selective bacteria flora no addition of Bactericides and fungicides are necessary - Low consumption, as well as economical Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics Property Units Appearance of concentrate Appearance of emulsion ( 5 % ) PH value ( 3 % solution) Refractometer @ 20°C Density @ 20°C kg/m3 Viscosity @ 40 °C cSt Typical ASTMIP Clear Brown Opaque -Transparent 8.6 - 9.0 0.9 (Multiply) 0.950 D4052365 60 D445 Recommended concentrations: Grinding 4.5 - 5.5 % Fine Cutting 5 - 7 % Medium Cutting 7 - 9 % Heavy Cutting 10 - 15 % Pack Size Part Number 20LBN005614 38 Hand Cleaner Bell Hand Cleaner is a gel / paste hand cleaner that contains specially selected abrasives that are soft on the hands, yet remove grease and grime easily. Application Storage & Handling Apply Bell Hand Cleaner onto hands, rub hands to dissolve grease and grime. Rinse hands with water and wipe dry with a towel. Bell hand cleaner may be stored in heavy duty polyethylene drums. Please ensure that the container lid is tightly closed whilst not in use. Do not leave container exposed to direct sunlight or excessive heat. Features & Benefits Bell Hand Cleaner has the following features: - Removes the heaviest grease and grime - Contains lanolin, which prevents drying of skin - Will not block drains - dissolves completely - Contains no petroleum solvents Keep the container closed at all times. Ensure that the product is used in a well ventilated area and that protective clothing is used when handling the product. Avoid entering areas where mists or vapours have built up as a result of abnormal temperatures or pressures without the proper breathing equipment and protective clothing. Typical Characteristics PropertyTypical Density @ 20°C 1 SmellLemon ColourYellow pH7.0-8.0 Pack Size Part Number 5KGBN005615 Pack Size Part Number 0.5KGBN005616 39 MINING & CONSTRUCTION B18E Articulated Dump Truck 12m3 Bottom Dumper Trailer 924K Tug Tractor HX230E Excavator B20E Articulated Dump Truck L705E Wheeled Loader 700J Dozer HX240E Excavator B25E Articulated Dump Truck L1004E Wheeled Loader 850J Dozer HX270E Excavator B25EN Articulated Dump Truck L1204E Wheeled Loader PR744 Dozer HX310E Excavator B30E Articulated Dump Truck L1506E Wheeled Loader PR754 Dozer HX390E Excavator B35D Articulated Dump Truck L1706E Wheeled Loader PR764 Dozer HX500E Excavator B40D Articulated Dump Truck L1806E Wheeled Loader 670G Motor Grader R964C Excavator B45D Articulated Dump Truck L2106E Wheeled Loader 672G Motor Grader R974C Excavator B50D Articulated Dump Truck L2606E Wheeled Loader 770G Motor Grader 2306D Articulated Tractor B25L Articulated Dump Truck L2706E Wheeled Loader 772G Motor Grader 2806D Articulated Tractor B30L Articulated Dump Truck 315SK Backhoe Loader 870G Motor Grader 4206D Articulated Tractor 11m3 Dumper Trailer 914K Loader 872G Motor Grader SCREENS & CRUSHERS J-1160 Jaw Crusher C-1550 Cone Crusher 595 Hydratrak 863 Heavy Duty Screener J-1170 Jaw Crusher I-100 Impact Crusher 663 Inclined Screener 883 Heavy Duty Screener J-1175 Jaw Crusher I-110 Impact Crusher 683 Inclined Screener 984 Horizontal Screener J-1480 Jaw Crusher I-110RS Impact Crusher 684 Inclined Screener C-1540 Cone Crusher I-130 Impact Crusher 693+ Inclined Screener C-1540RS Cone Crusher I-130RS Impact Crusher 694+ Inclined Screener ROADS & REHABILITATION BT 65/4 Tamper BW 138 AD Tandem Drum Roller BW 213 Single Drum Roller BC 472 Refuse Compactor BP 18/45-2 Plate BW 151 & 161 Tandem Drum Roller BW 216 Single Drum Roller BC 572 Refuse Compactor BPR 35/60 Plate BW 24RH Pneumatic Tyred Roller BW 219 Single Drum Roller BC 672 Refuse Compactor BW 65 H Pedestrian Roller BW 27RH Pneumatic Tyred Roller BW 226 Single Drum Roller BC 772 Refuse Compactor BW 75 H Pedestrian Roller BW 177 Single Drum Roller BF 300 P & BF 600 P Paver MPH 122 Stabilizer/Recycler BW 90 AD & BW 120 AD Tandem Drum Roller BW 211 & 212 Single Drum Roller BC 462 Refuse Compactor MPH 125 Stabilizer/Recycler FORESTRY 125A Logger TH302 Hauler 2 Bunk 4x4 HX230E Excavator with Waratah Head 703JH - JD Tracked Harvester 225A Logger TC403 Long Range Forwarder 6x6 643J - JD Wheeled Feller Buncher 753JH - JD Tracked Harvester 220E Telelogger TC302 Long Range Forwarder 6x6 843J - JD Wheeled Feller Buncher 759JH - JD Tracked Harvester 225E Logger Bell Tandem Timber Trailer 753J - JD Tracked Feller Buncher 540G III - JD Cable Skidder 225HP Debarker TC302 Long Range Forwarder 4x4 759J - JD Tracked Feller Buncher 548G III - JD Grapple Skidder TH403 Hauler 3 Bunk 6x6 Bell Timber Trailer Rear Tip/Non Tip Sawlog 1710D & 1910D - JD Forwarder 640H - JD Cable Skidder TH302 Hauler 2 Bunk 6x6 Afri Tractor: 904, 1216, 1716 2wd or 4wd Haulage Tractors 1270D - JD Wheeled Harvester 648H - JD Grapple Skidder 1216A & 1216AF Rigid Tractor 220A Cane Loader Std Tandem Spillerbar Rig 2806D Articulated Tractor 904A & 904AF Rigid Tractor 220A Versalift Wide Tandem Spillerbar Rig 4206D Articulated Tractor 125A 3cyl Cane Loader 120A 2,75T Rough Terrain Forklift High Roll Bin Tandem Rig 1716A & 1716AF Rigid Tractor 125A 4cyl Cane Loader 220A 3,5T Rough Terrain Forklift Non-spill/bundle Tandem Rig 2306D Articulated Tractor E-mail: [email protected] • www.bellequipment.com Broch/1343/04/13 - Lubricants Brochure Rev 5 AGRICULTURAL
