Tidland Edge Trim Slitting System

Edge-Trim
TM
E
dge-Trim is a self-contained shear slitting system specifically
designed for trimming the edges of a continuously moving flexible web.
Instead of expensive cross-web hardware, this unique system has both upper
slitter and driven anvil ring mounted on a common C-Frame on linear rails.
Setup time is virtually eliminated because the blade-to-anvil geometric
relationship is never disturbed during slitting repositioning.
Optional Automated Controls are available for applications where trim
width accuracy is critical, where access to the trim slitters is difficult, or
where ‘on the fly’ trim changes or adjustments to the position of the
knives are required.
Optional Automated Controls
• User-friendly, intuitive operations and touch-screen controls
• Highly accurate absolute web width patterns
• Absolute incremental positioning
• Position accuracy of ± .008" (0.2 mm)
KEY
FEATURES
Self-Contained Shear Slitting System
Key Features:
• Advanced design allows for trim
changes and blade replacements
‘on the fly’, reducing downtime
and waste
• Built tough for reliable operations in
mill-duty/heavy-duty environments
• Automatically maintains critical
blade-to-anvil relationship, greatly
reducing setup time while ensuring
trimming accuracy
• C-Frame allows trim up to 6.6", with
maximum possible trim of 15”
• Modular and flexible for a wide
range of operations
• Compact and rugged control console
enables many mounting options
• Can be configured to run from PC
via stand-alone program or existing
Human Machine Interface
(RsView32, Wonderware, etc.)
Design Features
Standard Edge-Trim Assembly
12.625
(320.6)
25.187
(639.7)
30.639
(778.2)
Class II Knifeholders
12.331
(313.2)
5.000
(127)
15.707
29.813
(757.3)
35.230
5.750
(146.0)
(894.8)
(399.0)
Class III Knifeholders
14.408
(366.0)
Specifications
Electrical
Simplified Connections
- Requires only 110 (or 220) VAC single-phase power and two easy-to-wire interconnect lines between the touchscreen
control and edge trim units. Input air connections are (also) required for the knife control and pneumatic brakes
- RS-485 communication and 24 VDC power cables
Servo System
- True servo system with incremental encoder and DC brushless servomotors
Touch Screen
- Industrial touch screen controller with NEMA 4 / IP65 enclosure
Control Console
- Compact and rugged control console enables many mounting options
Anvil Motors
- Ziehl-Abegg 3-phase External-Rotor-AC dust sealed motors enable a wide range of operating speeds and torque
values. Gear reducers are available for slow speed applications.
Mechanical
Construction
- Heavy duty steel construction with non-corrosive nickel plated finish
Knifeholders
- Performance Series Class II and Class III
Carriage Design
- Modular mounts (bottom and back mount available), linear bearings, upper and lower blades are connected
Trim Widths
- Standard trim support 5.6” (14.22 cm) (narrower and wider supports are available)
- Maximum trim of 15” (38.1 cm) possible
Actuator
- Self contained lead screw actuator with servomotor
Options
Can be configured to run from customer’s PC via stand-alone program or an existing Human Machine Interface
(RsView32, Wonderware, etc.)
Product Sheet: Edge-Trim 6.06
Design Features
Complementary Products:
TIDLAND
Slitting Products & Systems
- Performance Series Knifeholders
Winding Products
- Air Chucks
- Boschert Safety Chucks
FIFE
Guiding Products & Systems
MAGPOWR
Tension Control Products
Torque Control Products
Nomenclature
Automated Edge-Trim
1.
2.
3.
4.
5.
6.
7.
8.
Performance Series Knifeholder
Optional Platen Trim Support
Edge Trim Unit
AC Motor Drive
Linear Bearing Rail
Cable Management
Sealed Linear Actuator
Servo Motor
3
2
1
4
5
6
7
8
Maxcess Europe
Fifestrasse 1, D-65779
Kelkheim/Ts., Germany
Phone: (49) 6195-7002-433
Fax: (49) 6195-7002-933
E-mail: [email protected]
Maxcess Asia
300 Orchard Road No. 15-05
Orchard Towers
Singapore 238875
Phone: (65) 6834-1998
Fax: (65) 6835-4818
E-mail: [email protected]
©2006 Maxcess International
Tidland Corporation
2305 SE 8th Avenue
Camas, WA 98607, USA
Phone: 360-834-2345
Fax: 360-834-5865
E-mail: [email protected]
Web: www.tidland.com