January 2015 - San Diego Fine Woodworkers Association

San Diego Fine Woodworkers Association
Volume 34
Newsletter January, 2015
Issue 1
Our 34th Year of bringing Woodworkers together
The Next Meeting is 7pm Wednesday, Jan 28th at the Al Bahr Temple, 5440 Kearny Mesa Rd.
behind the Hampton Inn
January Program:
New Woodturning Techniques
with Tom Edwards
February Shop Tour:
Brian Jackson’s Shop
February 14th, 2015
Tom Edwards, an officer with the local woodturning
group, will give a demonstration, talk about woodturning
techniques and discuss his new method of using resin in
the finish of the bowl. This allows using imperfect wood
by filling the missing areas with clear and or colored
resins. Tom, a retired Navy Seal, now shows his work at
the Spanish Village Art Center and has won several
awards at the Del Mar Design In Wood show. Lately, he
has been demonstrating at various woodturning clubs
around the U.S. Tom's website is:
http://www.artinwood.org/t_edwards/tedwards.html
The meeting will be on Wednesday, January 28th at
7:00PM in the Al Bahr Temple, located at 5440 Kearny
Mesa Rd. (behind the Hampton Inn)
Hope to see you there
The tour begins at 9:00 am, coffee and donuts will be
served. Brian will demonstrate the Rose engine lathe. If
you aren’t familiar with this fascinating piece of
equipment, prepare to be amazed. His shop is located at
9598 Leyendekker Court, Lakeside, CA 92040. Come
out and enjoy the fellowship of like-minded wood
enthusiasts. Brian’s website is: jacksonwoodworks.com
Directions: From I 8 east, keep right at the fork and
continue on CA-67N/State 67N, take Winter Gardens
Blvd. exit, turn right on Winter Gardens Blvd., take
1st left on Woodside Ave., turn Right on Los Coches
Rd, turn right to stay on Los Coches Rd, take third
right onto Leyendekker Rd, Turn right on
Leyendekker Ct. Thanks again to Al DeVries for the
January shop tour; we all had a great time.
Dell Cover,
Program Chairman
Dale Stauffer, Program
Chairman
Please check website for changes www.sdfwa.org/
1
meeting will be held later beginning at 7 PM. Many of us
have enjoyed these classes in the past which have
typically been held on a Saturday morning in front of the
store, so I expect many will find these helpful and
interesting. Depending on the response to this first
class, we hope to continue offering such events before
each of our meetings.
President's
Message
January, 2015
If you are reading this online, please scan through other
sections of our website to familiarize yourself with our
organization and the calendar of events for this year. If
you are not yet a member, please feel free to attend one
of our General Membership meetings to check us out.
While there will be no pressure, we hope you find it as
inviting as we did and decide to join us.
In my first message as your new President, I would like
to start by wishing all a Happy New Year. I sincerely
hope your holidays were filled with joy and that you
begin 2015 with the intent to be active in woodworking
and all the other activities which bring you happiness.
Importantly, I would like to thank the membership for
trusting me with the leadership role for this year and the
vast number of others who have agreed to take on the
role of officers, committee leaders and members. Our
numerous and diverse activities require many of us to
step up and take on the responsibility of leading the
group through these efforts and we really appreciate
those who accept the call. Our special thanks go out
also to those who served us so well last year; we are
especially fortunate that Dick Ugoretz, our very capable
president for both 2013 and 2014, will remain on the
Board and be available to guide us through the year.
Bernie Burke
President, SDFWA
DESIGN IN WOOD 2015
The New Year brings us once again to preparations for
the annual Design in Wood Exhibition. Again this year,
we hope to improve this exceptional international
competition of fine woodworking. We have secured
major commitments from our many corporate and local
sponsors. Our co-sponsor, the 22nd Agricultural District,
also looks forward to our successful exhibition. Last
year's attendance provided the opportunity for over one
million fairgoers to see our exhibit.
I am excited by the outlook for this year and will do my
best to make it a very successful one for all of our
members. The organizational meeting for the Design In
Wood group held early this month made it clear that their
new leader, Ed Gladney, is highly qualified for the role
and that he has the support of a large and dedicated
group who rightfully take pride in our annual show at the
Del Mar fairgrounds. Bob Stevenson, who successfully
led the DIW event for so many years with the help of his
wife Janet, has decided to move on and has put forward
an ambitious plan to instill new vigor in our Mentor
program.
This year's theme is A Fair to Remember: a
Celebration of World’s Fairs & Balboa Park. The fair
has teamed with the City of San Diego in its Centennial
Celebration of Balboa Park. We will have a special
exhibit area planned around the theme this year.
Fine Woodworking Magazine will sponsor the "Best of
Show" award as the top award. We will be giving out
over $20,000 in cash and merchandise awards.
Our program chair, Del Cover, remains active in lining up
an interesting and informative set of speakers for our
General Membership meetings, beginning with Tom
Edwards who will speak of his unique approach to
woodturning at our General Meeting on Wednesday,
January 28, 2015. I hope as many as possible are able
to join us at 7 PM at Al Bahr Temple, located at 5440
Kearny Mesa Rd. (behind the Hampton Inn). Dale
Stauffer organized another of his popular Shop Tours on
Saturday, January 10 at Al DeVrie’s shop in El Cajon.
The Design in Wood Committee meets the first Saturday
of each month, January through May 2015.
Now is the time for you to get busy on your entry for the
competition. The fair will run 24 days again this year
from June 5 to July 5, 2015. All entries are online this
year, and will be available on the fair’s website
beginning in January. There is plenty of computer help
available for those that need it to enter. The fair entry
office personnel, as well as SDFWA volunteers, are
available to help with entering online. This includes help
with digital photography if needed. For help from
SDFWA members please call or email me at
858-484-4366, [email protected] or Jeff Bratt at
619-276-8641, [email protected]
Our January General Meeting will also find us setting out
on a new course with one of our sponsors, Rockler.
Mike Durlak, who manages the local Rockler store and
has always been a big supporter, has agreed to provide
a speaker to lead an informal class in various subjects
before our regular meetings get started. Paul Durshem
will lead off with a 45 minute class in Finishing, starting
at 6 PM at the Al Bahr Temple where our regular
Continued next page
2
Please note: The entry deadline is May 1, 2015.
Please note the calendar of events below:
Registration Deadline:
Friday, May 1, 2015
Exhibit Delivery Date:
Thursday, May 28, 2015
noon to 8:00pm
Exhibit Awards Ceremony:
Thursday June 4, 2015
7:00pm
Volunteers from our membership are desperately
needed
NO experience is necessary and volunteering is very
rewarding
January Raffle
1. Bessey 4-piece clamp set
2. Rockler 25 piece brad point drill bit set
3. Two Cherries 6 piece chisel set
4. DeWalt random obit sander
5. DeWalt laminate trimmer
6. DeWalt drill/driver 20V MAX
James Strawn, Raffle
Program Chairman
We need help with set up Monday, May 18 through
Friday, May 22. In addition to free fair tickets, enjoy
coffee, juice and donuts in the morning, a great lunch
and refreshments throughout the day.
We need members to “walk the floor” to help educate the
public and protect the exhibits. A shift is three hours.
You receive two tickets for each shift or four tickets for
each closing (last shift in the evening) floor-walking shift.
Notes from the Webmaster
It’s a new year, and there are some new faces on the
SDFWA Board of Directors – including myself, as I’ll also
be taking on the Treasurer duties this year. We’ve got
ideas about reinvigorating some programs SDFWA has
done in the past, and new ideas we hope you’ll be
excited about. We can always use help – you can
volunteer by contacting any Board member or
Committee chair.
We need members to work in the chair shop, building
children's chairs for charity. A shift is two hours. You
receive two tickets for each shift.
Fair tickets will be given to those who volunteer.
Volunteer for several shifts and you can receive enough
tickets for your family and friends. Up to 4 tickets will be
given to those who help with setup (exact number
depends on amount of time helping). Two tickets will be
given for each floor-walking shift or chair-shop shift.
For those who help with set up, we have free tickets
based on how much time you work, along with
refreshments and a great lunch
The new website has been up and running for just over
one year. I’ve been getting generally positive feedback,
and I also try to respond to fix problems and implement
suggestions. While I’m generally happy about the look
and design, we still have some issues when working with
the membership database. I apologize if this has caused
some login problems – I’ll fix those when you tell me
about them. Fortunately, there is really not much that
requires one to login – all the website content is visible,
there is nothing hidden. There are only two things that
require a login – to renew your membership on-line, or to
sign-up on-line for the Fall Seminar at the member’s
price.
Sign up to volunteer at www.sdfwa.org or at the General
meetings, starting with this month’s general meeting on
January 28.
Still, this year there will be a major effort on the “behind
the scenes” part of the website to streamline all the
duplicated effort currently required to keep the website
Remember, sign up for a shift and get 2 free tickets
to the Fair. Sign up for several shifts and get enough
for your family and friends also.
AGAIN THIS YEAR: SIGN UP FOR THE CLOSING
FLOOR WALKING SHIFTS AND DOUBLE YOUR
TICKETS TO 4 TICKETS FOR EACH CLOSING SHIFT
logins up-to-date.
This is your exhibit SDFWA. Let's make it the VERY
BEST. 858-484-4366 [email protected]
Jeff Bratt, Webmaster
Ed Gladney,
Coordinator, Design
In Wood
3
The Ocean Beach Branch
Library Sends a Letter of
Appreciation and Photo
IN MEMORIAM
We remember the three fellow woodworkers
whose lives ended in the past 12 months.
Mark Fuller
Russel Camp
Alvin Strunk
Each of these fine individuals was a long
time member of our association, a good
friend to many of us and a great contributor
to our activities.
2015 Craftsman List Update
The Craftsman List is posted on the association website,
www.sdfwa.org, under the heading of resources and is
also passed out at the Design In Wood exhibit at the San
Diego County Fair when visitors are looking for someone
who does woodworking. The list is only open to active
memberships.
I am in the process of updating the list. If you are
currently a member and want to remain on the list or do
not want to continue on the list, please let me know. If
you do not respond by February 15 th, you will be
dropped from the list. If you need to make changes,
please provide them when you reply about remaining on
the list. If you are not on the list and want to be placed
on the list, please provide the following information in the
order as listed: Last Name, First Name, Business
Name, City, Zip, Phone, Email/Website, Do you do this
Full Time or Part Time? Your Level of proficiency (pro,
advanced, intermediate), your Specialty.
Please provide all inputs to [email protected]. I
will need all inputs by February 15, 2015.
Ron Rossi, Craftsman List Chairman
Toy Program
Since our last report, the following toys have been
completed in 2014:
15
66
4
12
10
16
25
40
51
10
James Vitale, Pro Bono Chairman
Dinosaurs
Cars
Frogs
Cars
Cars
Cars
Baby Strollers
Bedding
Cars
Horse/Rider
Jerry’s Shop
George Byrne
John Carlson
John Berbow
Paul Trebbien
Ron Ronlinavage
Chuck Goldsmith
Barbara Moyer
Chuck Goldsmith
Bierman/Strolzoff
Our toy production total for this period was 249 and
1,571 to complete the year 2014.
ROGER SOLHEID, TOY PROGRAM
CHAIRMAN
4
Report on Jan. 10th Shop Tour
On January 10th we had the privilege of touring the
wonderful workshop of Al DeVries. The turnout was
good, the weather was perfect and Al’s presentation was
highly informative. He had many examples of his
woodwork displayed which he has built over the years.
Intarsia, jewelry boxes, custom cabinets and a great
storage shed he built for his lumber were among the
myriad items to study.
Al kept everyone in rapt attention as he went around his
shop noting and demonstrating the custom jigs, work
benches and tool cabinets he designed and built; many
of which he has had published in woodworking
magazines.
Al built his shop from the ground up about 22 years ago.
The layout is a marvel of efficiency. He explained his
method of workflow and tool choices, all the while
offering many tips for maintaining and using tools.
Because he has been woodworking for so many years
he was able to offer many insights for dealing with the
inevitable march of time that the aging woodworker
faces. He demonstrated special handles he has created
to allow extra leverage while adjusting jigs and tools. He
confided that he now makes mostly smaller pieces like
boxes, many of which he had on display. They are
beautiful.
The one thing that most impressed me about Al’s shop
was the degree of organization his custom made
cabinets allowed. I was left not only impressed but, truth
to tell, feeling personally inadequate. Upon arriving back
home I had the overwhelming urge to get organized!
Photos by Lou Adzima, SDFWA Historian
Article by Adrian Larson, Editor
Photos continued next page
5
Wants and Disposals
As you all know, the Wants & Disposals is open only to
current members that want to Buy, Sell, or Trade
equipment or supplies. It is not for commercial ads.
To list an item, please e-mail Dave Barnhart at:
[email protected] or call 760-721-1457 and
leave only your name, identify yourself as a SDFWA
member, and an evening call back number. When I call
back, please provide the following: Full Name, E mail
address, if you have one, the general area or town of
San Diego Co. where the equipment can be seen, price
range & item description.
You can bring a picture to the meeting and give a brief
talk or sales pitch. We do not have a display area, so
please bring only pictures to the General Meeting.
Please Note: Each ad will only run in one issue of the
newsletter. If you want to run the ad again, you will have
to resubmit the information to Dave Barnhart at the
above listed e-mail or phone number.
Dave Barnhart, Chairman
Wants and Disposals
Please contact Dave Barnhart
[email protected]
or 760-721-1457, when you have found a Buyer, an
Item to buy, or the help you requested.
Please check www.sdfwa.org for changes
6
Notice:
Wants
There will be a one day sale on February 7th,
beginning at 8:00am at the Ron Wolfe residence
801 Cabrillo Ave, Coronado, CA 92118.
There will be NO PRE-SALE – offered are:
SawStop 3HP Table Saw with mobile base 52” Fence
Model:PCS 312130 Price:$1,500.00
Delta 13” Planer 15 amp/120 V Model:22-580
Price:$375.00
Jet 14” Bandsaw with Carter Guides 220 Volt
Model:JWBS-14CS Price:$375.00
Craftsman Shopvac System with Vortex Dust
Separator Price:$80.00
RBI Hawk 16” scroll saw w/wheels and mag lite
Model: 216-3 Price:$275.00
Ohio Forge Drill Press 16 Speed w/mobile base
Model:510-459 Price:$180.00
Drill Doctor Drill Bit Sharpener Model:750SP
Price:$15.00
McCulloch 4” Angle Grinder Model:MG8302/12
Price:$20.00
Delta Tenoning Jig Model:34-182 Price:$40.00
Metabo Cordless Drill Model:6.27272 Price:$60.00
Kreg Pocket Hole System Model:K2000 Price:$40.00
Makita 5” Random Orbit Sander Price:$35.00
Work Bench w/ storage and 2 Vices Price:150.00
Multiple Hand Planes and other hand tools
Router Table w/ Porter Cable 690 Router w/ Multiple
accessories Price:Router $250.00
Wooden Tool Cabinet – Wall Hanging Price:$175.00
Craftsman Socket Set - Price:$75.00
Spokeshaves - Lie-Nielsen and others Price:$225.00
Jet Air Filter Unit w/remote 3-speed/1044 cfm
Model:AFS 100B Price:$175.00
Craftsman Storage Cabinet w/metalworking vice
Price:$80.00
Delta 12” Wood Lathe w/stand Many accessories and
full set of turning tools Price:$225.00
DeWalt 8” Grinder w/Wolverine Sharpening Jig
Model:DW 750 Price:$125.00
Craftsman Air Compressor 30 gal/5.5HP with hoses
and hose reel Model:919.165310 Price:$160.00
Makita Biscuit Jointer w/biscuits 5.6amp 6 depth
settings Model:3901 Price:$120.00
Plus Numerous Other Woodworking Tools and
Supplies
Dowload complete list with pictures at –
http://www.sdfwa.org/clientuploads/WantsAndDisposals/
WolfeToolSale.pdf
Welburn Gourd Farm is looking to outsource their precut
gourd work. They need to find the appropriate person to
take on the work. Ideally they would contract on a per
piece basis. Their current output is approximately 100200 pieces per month, but they are expecting an
increase. To start, they would send the contractor
cleaned bottle gourds:
http://www.welburngourdfarm.com/bottlegourds.aspx
Have pots and mini vases made:
http://www.welburngourdfarm.com/MiniVases.aspx
Gourds need to be cleaned:
https:www.youtube.com/watch?v=96SgSI4QFCU
An artistic eye is somewhat needed.
Barry Rosen - [email protected]
Please check website for changes
http://www.sdfwa.org/wants-and-disposals/
Disposals
Old Growth Teak Boards (all over 30 years old)
$24 per board foot
12”x11’8”x1” = 11.6 bf
11”x10’7”x1” = 9.7 bf
12”x9’7”x1” =11.2 bf
14”x9’7”x1” =11.2bf
10”x11’3”x1”=9.4 bf
8”x10’4”x1” = 6.9 bf
10”x10’9”x5/4” = 11.2 bf 8”x9’9”x5/4” = 8.1 bf
12”x7’8”x1” = 7.6 bf
7”x6’4”x1” = 4.7 bf
9”x6’8”x1” = 5.0 bf
8”x6’7”x1” = 5.4 bf
8”x6’7”x5/4” = 4.4 bf
Mike Madrid: 858-486-5423, [email protected]
Work Sharp 300 tool sharpener in perfect condition, all
original pads, 2 glass wheels, “edge vision” wheel,
leather honing wheel and manual $175;
Porter Cable 4210 Dovetail jig with all original items,
half-blind/dado combo template, template guide and
locknut plus manual $95.
Ted Moore: [email protected]
Stanley Safety Speed Cut Panel Saw model H-4, serial
number P-94, 8” blade, 2 ½ HP, 13 amps, 5800 RPM,
accepts 4’ x 8’ panel: $500 OBO.
Grizzly Jointer model G0586 and stand, new in boxes:
$600 OBO
Don Hicks 619-540-1949
Please check www.sdfwa.org for changes
7
2015 San Diego Woodworkers Association
DIRECTORS
President:
Vice-President:
Treasurer:
Secretary:
Member at Large:
Bernie Burke
Dale Stauffer
Jeff Bratt
Jeanne Skinner
Dick Ugoretz
760-723-0972
619-561-2202
619-276-8641
619-561-1655
858-490-6295
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
COMMITTEES
Craftsman list:
E-Mail List Manager:
Historian:
Magazine & book sales:
Membership:
Membership Greeters:
Mentor Program:
Merchandise:
Newsletter:
Pro Bono:
Programs:
Property:
Publicity:
Refreshments:
Resources/Raffle:
Scholarships:
Shop Tours:
Shows & Exhibits:
Sound Technician:
Special Events:
Swap Meet:
Toy Program:
Video Library:
Video Technician:
Wants and Disposals:
Web Site:
Ron Rossi
Harry Baldwin
Lou Adzima
Mike Switalski
Sia McGown
Kevin Deal
Bob Stevenson
Bob Dalton
Adrian Larson
Jim Vitale
Del Cover
Dale Stauffer
Clare Pister
Don Spangler
Jim Strawn
Jim Strawn
Dale Stauffer
Ed Gladney
Thomas Johnson
Ed Gladney
Don Spangler
Roger Solheid
Bob Reese
Michael Fairbanks
Dave Barnhart
Jeff Bratt
619-582-9883
858-278-8718
619-922-0311
858-404-3260
619-223-3259
951-565-6848
619-422-7338
619-534-8836
858-672-1808
858-623-8630
858-270-7739
619-561-2202
434-989-2357
858-270-6165
619-887-8090
619-887-8090
619-561-2202
858-484-4366
619-281-7170
858-484-4366
858-270-6165
858-279-1140
858-695-2460
619-465-4972
760-721-1457
619-276-8641
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Meeting Dates for 2015
General Membership Meetings
Board Meetings
Al Bahr Temple
5440 Kearny Mesa Road, SD
(behind the Hampton Inn)
7:00 PM
The Hardwood & Hardware Co.
8849 Complex Drive, SD
7:00 PM
Wednesday:
January 28
March 25
April 29
May 27
July 29
September 30
December 2
Wednesday:
March 4
April 1
May 6
July 8
September 2
November 4
SDFWA Mailing Address
P.O. Box 82323
San Diego, CA 92138-2323
SDFWA Web Page Address
http://www.sdfwa.org
8
Sponsors
To receive your discounts, please show your membership card before you make a purchase
American Furniture Design Co
www.americanfurnituredsgn.com
E-mail [email protected]
DeWalt, Porter Cable, Delta Factory Service Center
7290 Clairemont Mesa Blvd., San Diego, CA 92111
Phone: (858) 279-2012
Hours: 7:30-4:30 M-F
Dave Stelmachowski, Manager
Phone: (760) 743-6923 (Orders)
Hours: 8:30-4:30 M-F
Brian Murphy, Proprietor
Porter Cable, Delta, DeWalt, Devilbiss, FLEX,
Biesemeyer and Oldham Parts, Accessories, Repairs
and Reconditioned Tools.
Special consideration to SDFWA members
125 of the Finest Woodworking Plans, The only supplier
of Daly's Finishing Supplies in San Diego, Hardware,
Hand Tools and Books.
SDFW member Benefits, 15% on all products and Free
Shipping in San Diego County.
Environmental Spray Systems
www.espraysystems.com
Email: [email protected]
Bayside Paint, Inc.
www.baysidepaint.com
Email: [email protected]
1228 Knoxville St., San Diego, CA 92120
Phone (619) 275-7800
Hours: 6:30 – 5:30 M-F, 8 -5 Saturdays
Robert Lewis, Manager
7114 Convoy Ct. San Diego, CA 92111
Phone: (858) 279-7114
Hours: 8:00-5:30 M-F
Sam Rinaker, Owner
Specializing in spray finishing equipment. Local
distributor for Devilbiss, Graco, Paasche, Accuspray,
Ransberg and Gema. 10% discount to SDFWA
members.
Mohawk Finishing Products and many other stains,
sealers, fillers and tools. Free delivery with minimum
order and UPS shipping available.
10% discount to SDFWA members.
Fas-N-Go
Craftsman Studio Woodworking Tools Store
www.CraftsmanStudio.com
E-mail [email protected]
2260 Main St. Suite 15, Chula Vista, CA
Phone: (619) 424-4774
Hours: 7:30-5:00 M-F
2737 Via Orange Way - Suite 110, Spring Valley, CA
91978
Phone: (888) 500-9093
Hours: 10:00-5:00 Mon, 9:00-5:00 Tue-Thu. Closed FriSun
Bill Kohr, Proprietor
Nail guns, brads, staples, nails, plus accessories for nail
guns and repair service. Distributor for 3M, Senco,
Haubold, Josef Kihlberg, Spotnail, Hitachi, Bostich and
Paslode.
10% discount on sales and service to members.
Stocking Authorized Dealers for: Lie-Nielsen
Toolworks, Auriou, Shapton, DMT, TANOS (Systainers),
Veritas, FastCap, Trend Diamond Products, Glen-Drake
Toolworks, Czeck Edge Tools, Two Cherries Carving
Tools.
Note: web orders ship Mon-Fri.
In-store discount to SDFWA Members on selected
products.
Frost Hardwood Lumber
www.frosthardwood.com
6565 Miramar Rd. San Diego, CA 92112
Phone: (858) 455-9060 (800) 258-3534
Hours: 7:00-4:30 M-F, 8:00-12:30 Sat.
Jim Frost, proprietor
They stock a wide variety of domestic and imported
hardwoods as well as veneers, laminates and many
other supplies for the commercial and hobbyist
woodworker. The Frosts (Mr. G. T., Bruce and Jim)
along with their staff stand ready to serve your
woodworking needs.
Special SDFWA discount.
9
TH&H The Hardwood and Hardware Company
R. S. Hughes Co. Inc.
www.rshughes.com
The Woodworkers one Stop for Material and Supplies
www.th-h.com
1281-B Liberty Way, Vista, CA 92081-8309
Phone: (760) 579-0222
Hours: 7:45-5:00 M-F
Chuck Schweikart, Manager
8849 Complex Dr. San Diego, CA 92123
Phone: (858) 536-1800 Fax: (858) 614-1811
Hours: 7:00-5:00 M-F, 9:00-4:00 Sat.
Tom Drinnon, Manager
Hardwood lumber, Moldings, Veneers, Cabinet
Hardware, Finishes, Hand Tools and Supplies.
Contractor discount to members.
San Diegos largest inventory of 3m abrasives,
adhesives, safety equipment and more. Phone
orders/estimates. UPS shipping or walk in service
available. 10% discount to members.
TH&H goes out of their way for SDFWA! They
open their doors and stay late for our board meetings.
Thanks TH&H!
Rockler Woodworking and Hardware
www.rockler.com
Lane Stanton Vance Lumber
8199 Clairemont Mesa Blvd. San Diego, CA 92111
Phone: (858) 268-1005
Hours: 9:00–6:00 M-F, 9:00-5:00 Sat., 11:00-4:00 Sun.
Mike Durlak, Manager
360 Vernon Way, El Cajon, CA 92020
Phone: (619) 442-0821
Hours: 7:00-3:00 M-F
The company carries domestic and imported hardwoods,
molding and panel products for cabinet makers, furniture
makers and contractors.
Contractor discount to members.
Rockler is an excellent source for hard to find hardware
and accessories. Manager Mike Durlak and his staff can
help you with good selection of hardware, exotic
hardwoods, veneers, inlays, specialty moldings, fine
woodworking hand tools, an impressive array of finishing
materials, a great selection of books and plans and
weekly workshops in many disciplines. Visit this great
woodworking source next time you need that special
item no one else seems to have. Catalogues are
available. 10% discount on general purchases (except
power tools).
Mission Molding & Wood Specialties
www.missionmoulding.com
9510 Chesapeake Dr. # 401. San Diego, CA 92123
Phone: (858) 569-8591
Hours: 7:30-5:00 M-F, 8:00-1:00 Sat.
Bob Hawk, Manager
Russ Filbeck, Master Chair Maker
www.russfilbeck.com
E-mail: [email protected]
(858) 566-9699
The sign inside Mission Molding’s door says "We have
one of the largest selections of architectural and
decorative moldings in Southern California." Select from
more than 300 patterns in a variety of woods as well as
polystyrene, fiberglass and primed plastic. The staff of
Mission Molding can also supply you with mantels,
handrails, balusters, columns and more.
Depending on the item members will get a 5% to 10%
discount.
Make your own heirloom quality chair.
Chair styles include Appalachian Ladder Back and
Windsor chairs. All materials, tools and instruction
provided. Class size is limited to two students.
Use the web site, e-mail or call Russ to schedule your
class.
10% discount for SDFWA members on the Two-Slat
Ladder Back or Sack Back Windsor chair class.
Packaging Store
www.gopackagingstore.com
Shellac Finishes
www.shellacfinishes.biz
E-mail [email protected]
Vijay Velji, Proprietor
7848 Silverton, Suite A, San Diego, CA 92128
Phone (858) 549-7274
Hours: 9:00-5:00 M-F
Peter Wharf, Manager
Internet only. Shipped USPS
De-Waxed Shellac Flakes for classical woodworkers at
very competitive prices.
SDFWA members must enter coupon code 1010 during
checkout to receive a 10% discount
Custom boxes, crating, packaging supplies and
shipping. Phone estimates and pick up service available.
10% discount to SDFWA members
10
Strata Forest Products
www.strataforest.com
165 Denny Way, El Cajon, CA 92020
Phone: 619-449-9663
Hours: 7:00-4:00 Mon.-Sat.
Bob Evans & Jack Griede Proprietors
Strata Forest Products is a diversified company
specializing in hardwood lumber, panel products and
moldings. With years of experience, we have been
serving design firms, architects, cabinet shops and the
furniture industry in all their hardwood needs. From our
wide range of hardwood species, to our custom knife
grinding facilities, we have both the skills and tools to
turn unique designs into reality.
Contractor discount to SDFWA members.
Tropical Exotic Hardwoods of Latin America
www.anexotichardwood.com
2270 Camino Vida Roble, Suite "B", Carlsbad, Ca.
92011
Phone: (760) 434-3030, Fax: (760) 434-5423
Hours: 8:30-4:30 M-F, 9:30-1:00 Sat.
Mitch Talcove, Owner/ Manager
Specializing in a wide selection, varieties, sizes, and
shapes of Exotic Hardwoods from Latin America.10%off
all purchases with valid SDFWA card (cash or check
preferred if SDFWA is being applied).
Toolmart, Inc.
www.toolmarts.com
2750 Auto Park Way, Escondido, CA 92029-1030
Phone: (760) 747-2626
Hours: 7:00-5:30 M-F, 7:00-4:00 Sat.
Jeff McCreary, Manager
Discount tool store and authorized repair center.
Contractor discount to members.
Woodworker West
www.woodwest.com
P.O. Box 452058, Los Angeles, CA 90045
Phone: (310) 216-9265 Fax: (310) 216-9274
E-mail: [email protected]
Ron Goldman, publisher
Published bi-monthly to promote craftsmanship in
woodworking throughout the western U.S. Discount
subscription rate to SDFWA members. $10 for one year
and $18 for two year. When applying, after your name
add SDFWA member and your member number.
11
Non-Profit Org.
U.S. Postage Paid
Permit 697
San Diego, CA
Next meeting: 7 pm, Wednesday, January 28th, 2015 at the Al Bahr Temple
12