“SHIMPO” Digital Tachometer Japan

“SHIMPO” Digital Tachometer
Japan
Contact Type Tachometer
DT-105A
(5 digit 12mm high LCD)
PH-100A
(5 digit 12mm high LCD)
DT-107A
(5 digit 10mm high LED)
DT-105A/ DT-107A
PH-100A
rpm
rev/s
rev/h
cm/s
m/s
m/min
m/h
km/h
km
m
cm
rev
Measuring range
Surface speed
Length
Total number of rotation
0.10~25,000
0.002~416.67
6~99,999
0.03~6,350.0
0.0003~63.500
0.02~3,810.0
0.9~99,999
0.001~228.60
0.0001~99,999
0.005~99,999
0.5~99,999
0.1~99,999
Measuring range
Surface speed
(by 6” wheel)
Length
Total number of rotation
1.0~25,000rpm
0.1~3809.8 m/ min
0.1~4,166.4 yards/ min
3~99,999 inches/min
0.2~12,499 feet/ min
0.01~99,999 m
0.01~99,999 yards
1~99,999 inches
0.1~99,999 feet
0.1~99,999 rev
Non-Contact/ Contact Type Tachometer
DT-205L
(5digit 12mm high LCD)
DT-207L
(5 digit 10mm high LED)
PH-200LC (contact and laser
non-contact)
(5 digit 12mm high LCD)
DT-205L/ DT-207L
Measurement
range
Surface
speed
PH-200LC
Contact
Non-contact
(laser)
Contact
Surface
length
rpm
rev/s
rpm
rev/h
cm/s
m/s
m/min
km/h
km
m
0.8~25,000
0.01~416.67
6~99,999
0.10~1666.7
0.2~6350.0
0.002~63.500
0.11~3810.0
0.007~228.60
0.0001~99,999
0.02~99,999
Measuring range
Surface speed
(by 6” wheel)
length (by 6” wheel)
Total number of rotation
Hong Kong Head office:
Unit D, 18/F, Roxy Industrial Centre, 58-66 Tai Lin Pai Road, Kwai
Chung, Hong Kong
TEL: (852) 2481 1323
PH-200L (non- contact)
(5 digit 12mm high LCD)
Measuring range:
6.0~99,999rpm
FAX: (852) 2418 1302
E-mail: [email protected]
Website: www.chescientific.com
6.0~25,000 rpm (contact)
6.0~99,999 rpm (laser, non-contact)
1.0~3,809.8m/ min
1.0~4,166.4 yards/ min
36~99,999 inches/ min
3.0~12,499 feet/ min
0.2~99,999m
0.2~99,999 yards
0.5~99,999 feet
1~99,999 rev
TEL: (86 571) 8729 7500 FAX: (86 571) 8729 7511
E-mail: [email protected]
Website: www.fortunescientific.com.cn
Guangzhou Branch:
TEL: (86 20) 8130 7388
FAX: (86 20) 8108 4925
E-mail: [email protected]
“SHIMPO” Stroboscope
Japan
Stroboscope
Stroboscope can emit short-term frequent flash, when the flash rate of stroboscope synchronize with the
speed or vibration rate of the detected object, the moving object rendered quiescent state in vision, then the
speed of the moving object (e.g. Motor) can be determined. In addition, The vibration of object, high-speed
photography and analysis of high-speed object can be analyzed by making use of stroboscope.
DT-311N
DT-315N
Model
Flashing range
Accuracy
Resolution
Internal
mode
Phase shift
Output signal
DT-326
Specification
DT-311N
DT-315N
40.0-35,000 rpm
±0.01% of reading
0.1rpm: 40.0-4,999.9rpm
0.2rpm: 5,000-7999.8rpm
0.5rpm: 8,000-9,999.5rpm
1rpm: 10,000-35,000rpm
Use +/- push buttons (360˚ in 6 seconds)
Synchronous, 400msec. Pulse output, 0
to +12 VDC amplitude (approx.), 4.7 KΩ
impedance
Rate multiplier/
divider
External
Mode
General
unit: fpm/ Hz
Forward/ backward by 3˚ increment
Voltage: DC30V or less,
Current: 30mA or less,
Pulse width: approx. 200µs
X 2, ÷2
Flashing range
0.0-35,000rpm at 40-10,000rpm
Phase shift
Delay time
0-359˚ with 1˚ resolution
0-2,000 msec at 40-10,000 fpm
LO level: 0-0.8 VDC,
HI level: 2.5-12 VDC,
Pulse width 50µsec min
External trigger
Input signal
DT-325
DT-326
1~2,000Hz, 60~120,000fpm
0.02% ±1 digit (at 25℃)
0.01Hz (0.01-200Hz)
0.1Hz (0.1-2000Hz)
-
Flash rate (input frequency):
1-166Hz,
60-10,000fpm
Delay: angle: 0~359˚
Delay time: 0~999ms
Photo Coupler input,
Current 12mA (approx.)
Flash tube
power/ life
Xenon, 10W max. (100 million flashes)
Power
230VAC, 60/50Hz
Internal battery
pack battery
charger
White LED 5500K, More than 1500 hours
8
(approx. 5 x 10 times at 6000 fpm)
0.1˚~2.5˚/ 360˚ setting can be changed by 0.1˚
increments
Alkaline AA
Alkaline AA battery (1.5V x
battery (1.5V x 4pcs), AC adapter (DC5V/
4pcs)
2.0A)
Flash duration
10-40µsec.
Weight
1.2kg (2.6lbs)
2kg (4.4lbs)
About 500g (include batteries)
Handle, flash tube
Handle, flash tube,
AC charger/
adapter
Standard
accessories
Hong Kong Head office:
Unit D, 18/F, Roxy Industrial Centre, 58-66 Tai Lin Pai Road, Kwai
Chung, Hong Kong
TEL: (852) 2481 1323
FAX: (852) 2418 1302
E-mail: [email protected]
Website: www.chescientific.com
Carrying case,
alkaline AA
battery x 4
AC adapter, connection port
for external output, carrying
case, alkaline AA battery
(1.5V x 4pcs)
TEL: (86 571) 8729 7500 FAX: (86 571) 8729 7511
E-mail: [email protected]
Website: www.fortunescientific.com.cn
Guangzhou Branch:
TEL: (86 20) 8130 7388
FAX: (86 20) 8108 4925
E-mail: [email protected]
“SHIMPO” Torque Meter
Japan
TRC Series Digit Torque Checker
Fast, accurate and convenient calibration of torque wrenches, torque drivers, and torque watches
Include accessory (bracket and screw)
The TRC torque Checker is USB capable for easy PC/software interface. Combined with the free
DigiTorque_TRC software, graphical display and statistical analysis are performed and collected
automatically
With visible and audible alarm for reminding user the low or high limit is exceeded.
Can store up to 3000 data points and automatically calculate the maximum, minimum and average value
Model
Capacity
Measuring Unit
Measuring
Nm
range
Ncm
Resolution
Nm
Ncm
Display
Accuracy
Measuring Modes
Overloading
A/D conversion
Sampling
Memory
Comparator feature
Wrench
I/O interface
Power
Operating
Environment
Dimensions (in)
Weight
Software
Accessory
Specification
TRC-5
TRC-10
5 Nm
10 Nm
Nm, Ncm, kgcm, lbin
0.020-2000
0.050-5000
0.10-10.00
2.0-200.0
5.0-500.0
10-1000
0.001
0.001
0.01
0.1
0.1
1
4-digit LCD display, Character height 12mm
Sub display, 3-digit
±0.5/ FS
Mean; displays torque value in real time, Peak; displays peak torque value
120% of full scale
12 bit
10msec (100/ sec)
Total 3000 data, 10 sets with 300 data points per set
LED indicates “NG”, “OK” with adjustable alarm
9.5 square drive
USB1.1 (data download by special software)
NiMH rechargeable battery and AC adapter 100-240vac, 50/60Hz
TRC-2
2 Nm
0-40℃, (32-104℉) 35-85%RH (non condensing)
L320 x W220 x H97 (12.60” x 8.66” x 3.82”)
Approx. 6.0 kg (13.25lbs)
DigiTorque_TRC Free Download From Shimpo Web site
Adapter for electric torque driver
AC adapter, USB cable, Desktop, Mounting Bracket & Screws (2)
TNJ/TNP Series Digital Torque Meter
Precision, digital display and easy to use
Small and save place
Can be applied in different aspect such as measure OPEN and CLOSE torque values for
various applications, as a cap torque analyzer, determine bottle closure and breakaway
torque
TNP Series functions:
1 It has a wide memory capacity capable of storing 1,000 data points.
2 Contains statistic function such as average, maximum and minimum
3 The TNP torque meter is USB capable for computer testing, combined with the free
Digitorq Software, additional analysis and testing can be performed.
4 With internal rechargeable battery
Model
Standard
With USB interface
Measuring range x
resolution
Accuracy
Chuck range
Weight
Dimensions
TNJ-2
TNJ-5
TNP-2
TNP-5
0~2.000 x 0.001Nm 0~5.000 x 0.001Nm
0~200.0 x 0.1Ncm
0~500.0 x 0.1Nm
0~20.39 x 0.01kgcm 0~50.99 x 0.01kgcm
0~17.70 x 0.01lbin
0~44.25 x 0.01lbin
± 0.5% full scale
10~190mm
8 kg
320 x 227 x 126mm
Hong Kong Head office:
Unit D, 18/F, Roxy Industrial Centre, 58-66 Tai Lin Pai Road, Kwai
Chung, Hong Kong
TEL: (852) 2481 1323
FAX: (852) 2418 1302
E-mail: [email protected]
Website: www.chescientific.com
TNJ-10
TNP-10
0~10.00 x 0.01Nm
0~1000 x 1Nm
0~102.0 x 0.1kgcm
0~88.5 x 0.1lbin
12.5 kg
TEL: (86 571) 8729 7500 FAX: (86 571) 8729 7511
E-mail: [email protected]
Website: www.fortunescientific.com.cn
Guangzhou Branch:
TEL: (86 20) 8130 7388
FAX: (86 20) 8108 4925
E-mail: [email protected]
“SHIMPO” Force Gauge and Test Stand
Japan
FGN Series Economy Digital Gauge
Inexpensive while maintaining high accuracy
and versatility
Can measure stress, tension and breaking
force
4 digit (12mm high) LCD display
Can be chosen kg (metric), N Newton
(international) or lb-pound (Imperial) units
Can measure peak (maximum value)
Built-in rechargeable battery
Accuracy: ±0.2%RC ±1/2 digit at 23℃
Model
Capacity x Resolution
2.000kgf x 0.001kgf
20.00N x 0.01N
5.000lb x 0.001lb
5.000kgf x 0.001kgf
50.00N x 0.01N
10.00lb x 0.01lb
20.00kgf x 0.01kgf
200.0N x 0.1N
50.00lb x 0.01lb
50.00kgf x 0.01kgf
500.0N x 0.1N
100.0lb x 0.1lb
FGN-2B
FGN-5B
FGN-20B
FGN-50B
FGP Series Standard Digital Force Gauge
In addition to the features of FGN, FGP also contains standard USB interface and output. It enable us to complete the
process of measurement to analysis of data.
Model
Capacity x Resolution
Model
Capacity x Resolution
5.000kg x 0.001kg
50.00N x 0.01N
10.00lb x 0.01lb
10.00kg x 0.01kg
100.0N x 0.1N
FGP-10
500.0g x 0.1g
20.00lb x 0.01lb
5.000N x 0.001N
FGP-0.5
1lb x 0.001lb
20.00kg x 0.01kg
200.0N x 0.1N
FGP-20
1000g x 1g
50.00lb x 0.01lb
10.00N x 0.01N
FGP-1
2.000lb x 0.001lb
50.00kg x 0.01kg
FGP-50
500.0N x 0.1N, 100.0lb x 0.1lb
2.000kg x 0.001kg
20.00N x 0.01N
FGP-2
100.0kg x 0.1kg
FGP-100
5.000lb x 0.001lb
1000N x 1N, 200lb x 0.1lb
With USB cable, Toriemon USB software is available (optional accessory)
FGP-0.2
200.0g x 0.1g
2.000N x 0.001N
0.5lb x 0.001lb
FGP-5
Test stand - Use together with FGN and FGP series digital force gauge, it enhances the versatility. The maximum
loading is 50kgf
FDS-50L
FGS-50VB-L
FGS-50VB-H
FGS-50H
FGS-50XB-L
FGD-50XB-H
MF series Mechanical Force Gauge
Model
MF-1
MF-2
MF-3
MF-5
MF-10
MF-20
MF-30
MF-50
Capacity x
Resolution
1kg x 5g
2kg x 10g
3kg x 20g
5kg x 25g
10kg x 50g
20kg x 100g
30kg x 200g
50kg x 250g
Model
MF-10N
MF-20N
MF-30N
MF-50N
MF-100N
MF-200N
MF-300N
MF-500N
Hong Kong Head office:
Unit D, 18/F, Roxy Industrial Centre, 58-66 Tai Lin Pai Road, Kwai
Chung, Hong Kong
TEL: (852) 2481 1323
FAX: (852) 2418 1302
E-mail: [email protected]
Website: www.chescientific.com
Capacity x
Resolution
10N x 0.05N
20N x 0.1N
30N x 0.2N
50N x 0.25N
100N x 0.5N
200N x 1N
300N x 2N
500N x 2.5N
Model
MF-2 (lb)
MF-5 (lb)
MF-10 (lb)
MF-20 (lb)
MF-30 (lb)
MF-50 (lb)
MF-100 (lb)
Capacity x
Resolution
2 lb x 0.01 lb
5 lb x 0.025 lb
10 lb x 0.05 lb
20 lb x 0.1 lb
30 lb x 0.2 lb
50 lb x 0.25 lb
100 lb x 0.5lb
TEL: (86 571) 8729 7500 FAX: (86 571) 8729 7511
E-mail: [email protected]
Website: www.fortunescientific.com.cn
Guangzhou Branch:
TEL: (86 20) 8130 7388
FAX: (86 20) 8108 4925
E-mail: [email protected]
“SHIMPO” Tension Meter
Japan
DTMB and DTMX series Digital Tension Gauge
The unit can measure standard wires; string, steel, copper and
2 other sample wires.
DTMB Series (Standard type)
Max., min., peak and the last values are stored
automatically
DTMX series (With Output function)
Max., min., peak and the last value are stored
automatically. 100 data can be stored.
Include 0~1Vdc analog output
Include RS-232 digital output
Specification
Model Standard DTMB-0.2 DTMB-0.5 DTMB-1
DTMB-2
DTMB-2.5B
type
With Output
DTMX-0.2 DTMX-0.5
function
DTMX-1
DTMX-2
Measuring range 0~200cN 1~500cN 100~1000cN 200~2000cN
196.1cN 490.3cN
981cN
1961cN
Capacity
Diameter String
<0.15 0.05~0.25
0.1~0.4
0.3~0.7
(TEX)
Steel
(WIRE)
Copper
DTMB-5B
DTMB-10B DTMB-20B
DTMX-2.5B
DTMX-5B
DTMX-10B DTMX-20B
250~2500cN
2452cN
500~5000cN
4903cN
1~10daN
9.81daN
2~20daN
19.61daN
0.3~0.7
0.5~1.2
0.7~1.4
Customer’s
wires
(custom
calibration)
<0.08
0.01~0.15
0.05~0.25
0.15~0.4
0.15~0.4
0.3~0.7
0.4~0.8
<0.15
0.05~0.25
0.1~0.4
0.3~0.6
0.3~0.6
0.4~1.0
0.7~1.2
Roller Span
Accuracy
Update time
Max. speed
Power
38mm
±1%R.C.
150~200m
m
100mm
±1.5%R.C.
0.5, 1, 2, 4 seconds selectable
1000m/min
AA x 4 (Alkaline battery: Continuous 20 hours) AC Adapter (Option)
Model with unit gf is available
“YOKOGAWA” Tension Meter
T-101 and T-102 Series Dial Type Tension Gauge
In the textile process, it is very important to control the tension of yarn.
'Yokogawa' dial tension meter equipped with three wheels, the tension of yarn
can be presented quickly and conveniently in dynamically state
Can be used to test the tension of wire or metal wire
Precision and reliable.
Specification
Range/ Resolution
Dimension
Model
Wight (g)
(W) x (H) x (D)mm
Gram (g)
Newton (N)
T-101-02
0~20/ 0.5
0~0.2/ 0.005
T-101-05
0~50/ 1
0~0.5 /0.001
T-101-10
0~100/ 2
0~1/ 0.02
About 60 x 152 x 95
About 320
T-101-20
0~200/ 5
0~2/ 0.05
T-101-30
0~300/ 10
0~3/ 0.1
T-101-50
0~500/ 10
0~5/ 0.1
T-102-01
0~1000/ 20
0~10/ 0.2
About 114 x 152 x 95
About 410
T-102-02
0~2000/ 50
0~20/ 0.5
About 90 x 152 x 95
About 400
Units (Gram and Newton) are available
Hong Kong Head office:
Unit D, 18/F, Roxy Industrial Centre, 58-66 Tai Lin Pai Road, Kwai
Chung, Hong Kong
TEL: (852) 2481 1323
FAX: (852) 2418 1302
E-mail: [email protected]
Website: www.chescientific.com
Japan
T-101
T-102
TEL: (86 571) 8729 7500 FAX: (86 571) 8729 7511
E-mail: [email protected]
Website: www.fortunescientific.com.cn
Guangzhou Branch:
TEL: (86 20) 8130 7388
FAX: (86 20) 8108 4925
E-mail: [email protected]