scope of accreditation - OMKA Kalibrasyon Merkezi

Transcription

scope of accreditation - OMKA Kalibrasyon Merkezi
TÜRK AKREDİTASYON KURUMU
iiiii~
18/12/2014
Sayı : 80224019-105.03/4886
11111111
Konu: Akredite Belge İnceleme Başvuru Formu
Omka-Omega Ölçme Kontrol Sistemleri Kalibrasyon Laboratuvar Cihazları San. Tic. Ltd. Şti.
1348. Sok, No: 5/401 TeknikMalzeme İş Merkezi Yeni şehir/İZMİR
İlgi: 18.12.2014 tarihli laboratuvar belge inceleme başvunmuz.
Başvuru yazımz ile akreditasyon durumunu sormıış olduğunuz "Omka-Omega Ölçme Kontrol
Sistemleri Kalibrasyon Laboratuvar Cihazlan San. Tic. Ltd. Şti." laboratuvanna
ilişkin gerekli
incelemeler yapılmıştır. Yapılan incelemeler sonucu;
"1348. Sok No: 5/401 Teknik Malzeme İş
Merkezi Yenişehir İzmir/Turkey"
adresinde
yerleşik "Omka-Omega
Ölçme Kontrol Sistemleri
Kalibrasyon Laboratuvar Cihazlan San. Tic. Ltd. Şti."
laboratuvanmn
Uluslararası Laboratuvar
Akreditasyon Birliği llAC ile karşılıklı tamma anlaşmasım (MRA) imzalamış olan "IAS (International
Accreditation Service)" akreditasyon kurumundan ISO/IEC 17025 alamnda alınmış "CIr 142" numaralı
akreditasyon sertifikasına sahip olduğu tespit edilmiştir.
Adı geçen laboratuvarın akredite edilmiş faaliyet konularına dair ilgili akreditasyon kurumunun
kataloğundan alınmış bilgiler ekte sunulmaktadır. Katalogtaki bilgilerin kullamm amacına uygunluğu
tarafimzca değerlendirilmelidir.
Bilgilerinizi rica ederim
Soner KARATAŞ
Genel Sekreter a.
Laboratuar Akredi~aşkan
Vekili
EK: Akreditasyon Belgesi (lOsayfa)
Sı
TÜR~!
(t)!
* Bu Belge,
5070 sayıh Karnm iıiikiiııierin: uygım olarak elektronik iımı ile iırı2alamrıştır.
1ÜRK AKREDİTASYON
KURUMU
Mustafa Ketral Mahal\esi 2125. Sk. No:1 06800 Çankaya Ankara TıiıXi)e
Telefun: +903 124108200 Faks: +903 124108300
A yrıııtıh Bilgi İçin İrtibat:
E- Posta: akirgoı@tı.ııkak.orgtr
Elekronik Ağ: www.tıırkak.orgtr
International Accreditation Service
CERTIFICATE OF ACCREDITATION
This is to signify that
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI
1348 SAK NO: 5/401
TEKNIK MALZEME ISMERKEZI
YENISEHIRIIZMIR
TURKEY
Calibration Laboratory CL-142
(Revised September 26,2014)
has met the requirements of the !AS Accreditation Criteria for Calibration Laboratories (AC204), has demonstrated compliance with the
ISO/IEC Standard ı7025 :2005, General requirements for the competence of testing and calibration laboratories, and has been accredited
commencing October 31, 2013, for the calibration discipline( s) listed in the approved scope of accreditation. The laboratory meets IAS
program requirements in the field of calibration.
~~
Patriek V. MeCullen
Viee President
G;?~CfY\
&nA'
. P. Ramaııı, P.E.
President
",
"\" i"{",1
...-x ~
,
J
~'~/.:::.
J,
/"....
BacMfft6i
~.....:~~-::••..•.•...
"/'
~
~ attach ed scope oif accrediitation
o fior fi eIds oif ca10b
o
d
di d 10b
o
h d )J'~,I"I\I\,'\"
,see
i ratian an accre ıle ca i ratton met o s
Print Date: 09/26/2014
~,,,,
ACCREDITED
Page 1 of 10
Thısoeereditation eer!ıfıeate supersedes ony IAS ocereditation eertıreot. beoring an oorllerdoteo The eertıfıeote becornes involld upon suspensfon, euncellotıon or revoeatlon or oeueditotion o
See the fAS Aceredltation Ustings on the web ot www.iosonlineoorgfOrcurrentoeeredltotioninformation, or eontoet!AS direetly ot (562) 364-82010
]1-04577
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALmRASYON
CIHAZLARI SAN. TIC. LTD. STI CL-142
(Revised September 26,2014)
LABORATUVAR
OMKA Omega Oleme Kontrol Sistemleri Kalibrasyon Laboratuvar Cihazlari San. TIC. LTD STI
1348 Sok No: 5/401
Teknik Malzeme Ismerkezi
Yenisehirllzmir
Tur key
MEASUREMENT
AREA
Electrical DC/LF
DC Voltage - Measure
RANGE & RESOLUTION
CALIBRATION
&
MEASUREMENT
CAPABILlTY1 (CMC) (i)
Salih Ayvaz
+009002324596263
TECHNIQUE,
ST ANDARO,
REFERENCE
EQUIPMENT
20mV to 200mV
>200mVto 2V
>2V to 20V
>20V to 240V
>240V to 1000V
41IJV
93IJV
870IJV
11mV
120mV
M140 Meatest Multifunction
Calibrator Multimeter Function
Up to 20kV
0.6kV
High Voltage Probe, Multimeter
DC Current Measure
200IJA to 2mA
>2mAto 20mA
>20mA to 200mA
>200mA to 2A
>2A to 20A
3.4IJA
3.4IJA
35IJA
750IJA
8mA
M140 Meatest Multitunction
Calibrator Multimeter Function
DC Resistance Measure
1 to 4000
>4000 to 2 kO
>2kO to 10 kO
>10kO to 40 kO
>40kO to 200kO
>200kO to 1 MO
>1MO to4 MO
>4MOto 20 MO
>20MO to 50 MO
170mO
370mO
1.90
9.40
370
5900
4.7kO
47kO
290kO
M140 Meatest Multifunction
Calibrator Multimeter Function
AC Voltage Measure
200mVto 2V
20Hz to 50kHz
>50kHz to 100kHz
>2V to 20V
20Hz to 10kHz
>10kHz to 50kHz
>50kHz to 100kHz
>20V to 240V
20Hz to 10kHz
>240V to 1000V
20Hz to 10kHz
DC Volts - Measure
High Voltage
October 31,2013
Commencement Date
Print Date: 09/26/2014
2mV
8mV
M140 Meatest Multitunction
Calibratar Multimeter Function
15mV
25mV
80mV
.~
9ACCREDITED
160mV
1.0V
"~
ThisDccredıtol'M artificaıe slIpers<!desany IAS accredilolion certificDıe beorine on earfı.r dole. The "'rtiticate becemes ,"valid upon suspens,on,
aeeredllation See the IAS Accreditattcn Listings on the web ol www,iosonlıne,of8 for currcııt oceredilation informotion, ofCoıılac! IAS dır.ct
08892
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD_ STI CL-142
(R evıse
- dS eptem b er 262014)
,
MEASUREMENT AREA
RANGE&
RESOLUTION
CALIBRATION &
MEASUREMENT
CAPABILlTY1
(CMC) (:t)
TECHNIQUE, REFERENCE
STANDARD, EQUIPMENT
Electrical
AC Volts - Measure
High Voltage
AC Current Measure
Up to 5kV
1kHz
2mA t0200mA
20Hz to 1kHz
>1kHz to 5kHz
>5kHz to 10kHz
>200mA to 20A
20Hz to 1kHz
0.6kV
l7IJA
62IJA
150IJA
High Voltage Probe, Multimeter
M140 Meatest Multifunction Calibrator
Multimeter Function
1.7mA
Sound Level - Generate
94dB at 1kHz
114dB at 1kHz
0.35dB
0.35dB
SC-05 Sound Generator
Inductance - Generate
0.1 to 1111mH
0.01mH
Inductance Box
Capacitance - Generate
0.001 to 0.01IJF
>0.01 toO.11JF
>0.1 to 1IJF
>1 to 50IJF
1.2nF
5.1nF
50nF
0.55IJF
Capacitance Box
Power Analyzers and Power Meters Generate
Electricity_One Phase to Three Phase
- kW, kVA, kVAr, kWh
Up to 2000
>2000 to 5000
>5000 to 50000
1.28x10-4
1.28x10-1
1.55x10-1
M140 Meatest Multifunction Calibrator,
Resistance Box
DC Current - Generate
20 to 100mA
>100 to 200mA
>200mA to 1A
>1t010A
0.8mA
1.3mA
5.8mA
231mA
M140 Meatest Multifunction Calibrator,
50 Turn Coil
AC Current - Generate
20 to 200mA
50Hz to 1kHz
1.3mA
M140 Meatest Multifunction Calibrator,
50 Turn Coil
>200mA to 1A
50Hz to 1kHz
6.5mA
>1 to 10A
50Hz to 1kHz
87.6mA
1 to 1000
>100 to 4000
>400 to 2kO
50mO
100mO
20
Resistance - Generate
October 31 , 2013
Commencement Date
ACCREDITED
Print Date: 09/2612014
Thıs oeeredılolıorı eerti~eole supersedes ony IAS aeerediıalion eerti~eote beoring on earli,r dole The urtipeaı. beeomes i
oeeredııalion See the fAS Accreditation Listings on the web at www.ıaıon/ıne or8 for current aeer.ditation informo
M140 Meatest Multifunction Calibrator
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI CL-142
(Revised September 26,2014)
MEASUREMENT AREA
Electrical (conlinued)
Resistance - Generate
RANGE&
RESOLUTION
CALIBRATION &
MEASUREMENT
CAPABILlTy1
(CMC) (±)
>2 to 10kO
>10 to 40kO
>40 to 200kO
>200 to 1MO
>1 t04MO
>4 to 20MO
>20 to 50MO
10.10
40.60
1060
5900
4.7kO
47kO
290kO
M140 Meatest Multifunction Calibrator
1.7IJm
ULM 300 Universal Length
Measurement
15.8IJm
26IJm
Gauge Blocks
15.8IJm
Gauge Blocks
4.6IJm
12IJm
Gauge Blocks
111IJm
Linear Standard
ULM 300 Universal Length
Measurement
TECHNIQUE, REFERENCE
STANDARD, EQUIPMENT
Dimensional
Dial Indicator
Calipers
Caliper - Digital
Height Gauges
Micrometers
Micrometer - Digital
Rules - Tapes
mm
0-1 00mm/0.001
O to 450mm/0.01mm
>450 to 900mm/0.Q1 mm
O to 450mm/0.01
mm
O to 25mm/0.001 mm
>25 to 175mm/0.001 mm
1 to 1000mm/0.5mm
Snap Gauges
10 to 150mm
2.4IJm
Ring Gauges
<i> 10 to 150mm
2.4IJm
Plug Gauges
<i> .5 to 100mm
1.7IJm
ULM 300 Universal Length
Measurement
Thread Plug Gauges (only Pitch <1»
Thread Ring Gauges (only Pitch <1»
Up to M100
M14 to M150
4.1IJm
4.1IJm
ULM 300 Universal Length
Measurement
Block Gauge
O to 125mm
880nm
ULM 300 Universal Length
Measurement
Depth Caliper
O to 300mm/0.001mm
9.23IJm
ULM 300 Universal Length
Measurement
Depth Micrometer
O to 175mm/0.001mm
3.54IJm
Block Gauge
800nm
Block Gauge
Feeler Gauge
Micrometer Setiing Bar
October 31, 2013
Commencement Date
Print Date:
O to 6mm
.~
•
O to 125mm
640nm
ULM 300 Universal Length
Measurement
ACCREDITED
0912612014
TIüsaccrcditatıoıı eerti~'Q!e supersedes ony IAS accrcditation ccrti(ıcate beoring an carlier dote. The certifje
occ,edı!ation See the IAS Accreditation Listings on the web at wıvıv.iasonlinc.org for current accredi
'3 08892
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI CL-142
(Revised September 26, 2014)
MEASUREMENT AREA
Dimensiona/
(conlinued)
RANGE&
RESOLUTION
CALIBRATION &
MEASUREMENT
CAPABILITy1
(CMC) (:t)
o to 300mm
o to 2mm
TECHNIQUE, REFERENCE
STANDARD, EQUIPMENT
2.4 IJm
Reference Calibrator
820nm
Thickness Foil
6.5mm (R1) to 50mm
(R25)
9.02IJm
Glass Rule - Dino Lite
Oto 200mm
9.01IJm
Reference Calibratar
Oto 90·
0.26·
Oto 25mm
820nm
Thickness Foil, Black Gauge
Thickness Foil
Oto 6mm
800nm
ULM 300 Super Micrameter
Passometer
Oto 2mm
800nm
Thickness Foil, Black Gauqe
Up to 14pH
0.09pH
Reference Buffer Solutions
84 to 12,880IJS/cm
1.7%IJS/cm
Reference Buffer Solutions
Oto 100%
1.17% Alcahal
Reference Solution
0.8 to 1.3g/cm3
1.17%g/cm3
Reference Solution
Viscosity Meter
100 to 23000cPs
0.78cPs
Reference Solution
Refractometer
Oto 100%brix
1.17%brix
Reference Solution
Miter
Thickness Meter
Radius Gauge
Sieve
Spirit Level, Angle Meter
Thickness Comparatar
Angle Gauge
Chemica//Gas
pH Meter
Conductivity Meter
Alcohal Meter
Aero, Baume, Density Meters
8 to 2000mm2/s
Din CUD
2
0.78mm /s
Reference Solution
Mechanica/
Oto 1,000Nm
2.5% indicated value
Tachometer
1Orpm to 1,000rpm
>1,000 to 10,000rpm
>10,000 to 99,999rpm
0.006rpm
0.06rpm
0.6rpm
Centrifuge
10rpm to 1,000rpm
>1,000 to 10,000rpm
>10,000 to 99,999rpm
1.6rpm
11rpm
76rpm
Torque Wrench
October 3 Lı 2013
Commencement Date
ACCREDITED
Print Date: 09/26/2014
Reference Torque Calibratar
M140 Meatest Multifunction Calibratar
Tachometer
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI CL-142
(R evıse
. d Seprem
t
b er 26 , 2014)
MEASUREMENT AREA
Mechanica/ (continued)
Pipettes
Gravemetric Method
Burettes
Gravemetric Method
Cylinders
Gravemetric Method
RANGE&
RESOLUTION
CALIBRATION &
MEASUREMENT
CAPABILlTY1
(CMC) (±)
Up to 100~L
>100 to 200~L
>200~L to 500~L
>500~L to 1mL
>1 to 2mL
>2 to 5mL
>5 to 10mL
>10 to 25mL
>25 to 50mL
>50 to 100mL
>100 to 200mL
O.4~L
0.6~L
0.9~L
1.8~L
2.9~L
5.8~L
8.7~L
14.4~L
17.7~L
21.1~L
29.7~L
Balance, Distilled Water
Up to 500~L
>500~L to 1mL
>1 to 2mL
>2 to 5mL
>5 to 10mL
>10 to 25mL
>25 to 50mL
>50 to 100mL
1.8~L
2.9~L
5.8~L
8.7~L
14.4~L
17.7~L
29.9~L
57.7~L
Balance, Distilled Water
>2 to 5mL
>5 to 10mL
>10 to 25mL
>25 to 50mL
>50 to 100mL
11
14
17
26
35
Balance, Distilled Water
~L
~L
~L
~L
~L
>100 to 250mL
>250 to 500mL
>500 to 1,000mL
>1,000 to 2,000mL
59 ~L
88 ~L
161 ~L
251 ~L
>2000 to 10000mL
>10000 to 20000mL
>20000 to 30000mL
>30000 to 40000mL
>40000 to 50000mL
1245 ~L
2134~L
3125 ~L
3692 ~L
4542ı.ıL
TECHNIQUE, REFERENCE
STANDARD, EQUIPMENT
Balance, Distilled Water,
OIML R-120, Clause 3
October 31, 2013
Commencement Date
Print Date: 0912612014
ACCREDITED
Thi, o,,,editotioıı certjficaı. s••persedes any fAS acuedjtatiorı certi/icate bearing.n ca,lier dote. The urtipcat. becemes i"valid upan
occredi/a/ion See tlıe IAS Accredıtatton Listings On the web at w\Vw.iosonlinc.ofg for current occredilotioıı informotion, Of corı
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI CL-142
(R evıse
. d Septem b er 26 , 2014)
MEASUREMENT AREA
Mechanical (conUnued)
Pykonometers
Gravemetric Method
Scales and Balances
Pressure
Shore Meter
A
Liquid in Glass
Thermocouples
Type S-T-R-B-E-J-K-N
Thermometers
Radiation
Thermometers
(IR)
Chambers
October
0.5~l
0.7~l
1.5~l
2.9~l
7.2~l
14.4~l
TECHNIQUE, REFERENCE
STANDARD, EQUIPMENT
Balance,
28.9~l
0.8 mg
0.9 grams
39 grams
E2 Class Weights
F1 Class Weights
M1 Class Weights
-0.85 to 10 bar/0.001 bar
10 to 400 bar/0.1 bar
0.0016 bar
0.42 bar
PressureNacuum
Calibratar
Pressure Calibratar
O to 96 Shore
2.09 Shore
Shore Test Black
O to 88 Shore
2.09 Shore
Shore Test Black
-30 to 90 °C/O.01 oc
>90 to 230°C/O.01 oc
>230 to 420°C/O.01 -c
o.sz-c
O to 250°C/O.1 oC
-30 to 230°C/O.01 oC
>230 to 420°C/O.01 -c
>420 to 800°C/O.01 -c
>800 to 1100°C/O.01°C
SPRT and Calibration
Baths
o.r-c
SPRT and Calibration
Baths
0.7°C
1.2°C
2.6°C
3.0°C
M140 Meatest
OSC
1.2°C
2.6°C
3.0°C
SPRT and S Type Thermocouples
Calibration Baths
50-200°C/O.1°C
>200-500°C/O.1°C
2.1°C
2.6°C
Black Body
200-900°C/O.1°C
>900-1200°C/O.1°C
4.0°C
4SC
S Type Thermocouple
1.1°C
K Tvpe Thermocouples
to 230°C/O.01
to 420°C/O.01
to 800°C/O.01
to 1100°C/O.01
-30 to 230°C/O.1
-c
-c
-c
-c
-c
0.31°C
0.8°C
3 Lı 2013
Commencement
Distilled Water
O to 300g/1 O~g
O to 40kg/1 mg
O to 600kg10.1 9
-30
>230
>420
>800
Furnace
Climatic
Up to 1ml
>1 to 2ml
>2 to 5ml
>5 to 10ml
>10 to 25ml
>25 to 50ml
>50 to 100ml
(Durameter)
Shore Meter D (Durorneter)
Thermal
Temperature
Measure RTD
CALIBRATION &
MEASUREMENT
CAPABILlTy1
(CMC) (±)
RANGE&
RESOLUTION
Date
ACCREDITED
Print Date: 09/2612014
Thisaeeredilalron certificaıe supersedes any MS acereditoliM cerlificate b;:oring aıı carlier dole. The certi~cate becemes invalid up
oeereditotion SeeIhe fAS Accredttaticn Listings on the web al wıyw.iasonlinc.org for current aeereditolion information, Ot c
Multifunction
Calibratar
and
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI CL-142
(R evıse
. d Sepıem
t b er 26 , 2014)
CALIBRATION
&
MEASUREMENT
CAPABILlTY1
(CMC) (±)
TECHNIQUE,
STANDARD,
Oto 140·C/0.1·C
1.1·C
Data Logger EBRO
Dataloggers
-30·C to 25·C
1.04·C
Reference Thermometer, Datalogger
Humidity (RH), Thermography
20 to 90%RH
1.23%RH
Heat Meter
-30·C to 90·C
0.5·C
1 to 10Hz
>10 to 100Hz
>1OOHzto 1kHz
>1 to 10kHz
>10 to 100kHz
>1OOkHzto 1MHz
>1 to 10MHz
>10 to 20MHz
5.84x10"'Hz
5.78x10-3Hz
5.78x10-2Hz
5.78x10-1Hz
5.78Hz
5.78x101Hz
577.6Hz
1.155kHz
M140 Meatest Multifunction Calibratar
100 9 to 3000 9
0.5 mm to 60 mm
Oto 99 rpm
0,9 9
0,1 mm
0,06 rpm
E2, F1 Class Weights
Linear Standard
M140 Meatest multifunction Calibratar
30 to 80'C
up to 1 Hz
40 rprn to 100 rprn
550 mm to 1000 mm
0,51'C
8,66 E-05 Hz
0,006 rpm
0,111 mm
SPRT and Calibration Baths
M140 Meatest Multifunction Calibratar
M140 Meatest Multifunction Calibratar
Linear Standard
25 to 80'C
50 mm to 200 mm
up to 1 Hz
1 kg to 20 kg
At 52 rpm and 500 rpm
0,51'C
0,111mm
8,66 E-05 Hz
0,9 9
0,006 rpm
SPRT and Calibration Baths
Linear Standard
M140 Meatest multifunction Calibratar
E2, F1 Class Weights
M140 Meatest Multifunction Calibratar
100 mm to 220 mm
30 'C to 95'C
up to 1 Hz
38 rpm to 42 rpm
500 ml to 600 ml
1100 ml to 1300 ml
0,111 mm
0,51'C
8,66 E-05 Hz
0,006 rpm
1,444 ml
2,887 ml
Linear Standard
SPRT and Calibration Baths
M140 Meatest Multifunction Calibratar
M140 Meatest Multifunction Calibratar
Balance, Distilled Water
MEASUREMENT
AREA
RANGE&
RESOLUTION
REFERENCE
EQUIPMENT
Therma/ (continued)
Autoclave
Time/Frequency
Frequency - Generate
Textile Testing Machines
Martindale Abrasion Machines
Mass
Linear
Speed
Tumble Dryers
Temperature
Timer
Speed
Linear
Reference Washing Machines (including
Wascator)
Temperature
Linear
Timer
Mass
Speed
Gyrowash and Washwheels
Linear
Temperature
Timer
Speed
Capacity
.7'\"'i ,
••••••
\
October 31, 2013
Commencement Date
ACCREDITED
Print Date: 09/2612014
Thisoecreditatton ,ertifıeat. soperscdes any IAS aeercditatiolt certificatc bcaring an earlier dotc. The ccrti[ıcate bccomes mvali
accrcdotation See the lAS Accreditation Listitlgs 011 the web at www.iasanlinc Or8 for cortcııl aeetedilolion information,
International Accreditatİon Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI CL-142
(R evıse
. d Sepıem
t b er 26 , 2014)
MEASUREMENT
AREA
Textile Testing Machines
(continued)
Random Tumble Pilling Testers
Linear
Speed
Timer
Pressure
RANGE & RESOLUTION
CALIBRATION
&
MEASUREMENT
CAPABILlTY1
(CMC) (i)
TECHNIQUE,
STANDARD,
REFERENCE
EQUIPMENT
5 mm to 160 mm
1200 rpm
up to 1 Hz
0,0069 to 1,035 bar
0,111 mm
0,006 rpm
8,66 E-05 Hz
0,0016 bar
Linear Standard
M140 Meatest Multifunetion Calibrator
M140 Meatest Multifunetion Calibrator
Pressure Calibrator
Pilling Testers (Box & Drum)
Linear
Speed
5 mm to 320 mm
30 rpm to 60 rpm
0,111 mm
0,006 rpm
Linear Standard
M140 Meatest Multifunetion Calibrator
Sample Cutters
Diameter of cut sample
20 mm to 150 mm
0,111 mm
Linear Standard
O mm to 120 mm
up to 1 HRz
O to 10 bar
10 to 15 bar
0,111 mm
8,66 E-05 Hz
0,0016 bar
0,42 bar
Pressure Calibrator
1 mm to 200 mm
200 mm to 800 mm
up to 1 Hz
10· to 90·
0,111 mm
0,111 mm
8,66 E-05 Hz
0,26
Linear Standard
Linear Standard
M140 Meatest Multifunction Calibrator
Digital Protraetor, Angle Gauge
0,1 to 1,1 kg
5 mm to 110 mm (stroke)
5 mm to 15 mm (peg diameter)
10 rpm to 60 rpm
0,9 9
0,111 mm
E2, F1 Class Weights
Linear Standard
0,006 rpm
M140 Meatest Multifunction Calibrator
100 9 to 5100 9
0,9 9
Oto 1,5 bar
1,5 to 3,5 bar
O mm to 140 mm
0.0016 bar
0.0016 bar
0,111 mm
Pressure Calibrator
Pressure Calibrator
Linear Standard
200 mm to 1000 mm
0,111 mm
Linear Standard
Burst Strength Testers
Linear
Timer
Pressure
Frame Textile Flammability Testers
Linear
Timer
Angle
Crockmeters
Mass
Linear
Speed
Perspirometer
Mass
Hydrostatic Head Tester
Pressure
Linear
Wrap Reel Tester
Circumferenee of the Cirele
Linear Standard
M140 Meatest multifunetion Calibrator
E2, F1 Class weights
October 31,2013
Commencement Date
Print Date: 09/26/2014
ACCREDITED
Thisoeeredjlol,on certilicolc '''persedes ooy IAS ocercdilolion ccrtilicoıe beoring on eorlier dotc. The ccrtiftcotc bccomcs invol'
oeered,lolion See the IAS Accreditation Listings on the web ot www.iosonlinc.org for current oeeredilction information
International Accreditation Service
SCOPE OF ACCREDITATION
OMKA-OMEGA OLCME KONTROL SISTEMLERI KALIBRASYON LABORATUVAR
CIHAZLARI SAN. TIC. LTD. STI CL-142
(R evıse d Septem b er 26 , 2014)
CALIBRATION
&
MEASUREMENT
CAPABILlTY1
(CMC) (i)
TECHNIQUE,
STANDARD,
upto10g
10 to 100 9
100 to 1000 9
0,8 mg
0,8 mg
0,9 9
E2, F1 Class Weights
E2, F1 Class Weights
E2, F1 Class Weights
Slide Ruler
1 mm to 1000 mm
0,111 mm
Linear Standard
Shirley Crease Recovery
Angle
Mass
Linear
10° to 180°
200 9 to 2000 9
1.5 mm to 200 mm
0,26°
0,9 9
0,111 mm
Digital Protractor, Angle Gauge
E2, F1 Class Weights
Linear Standard
Scorch i Sublimation
Surface Temperature
Mass
Timer
Linear
10°C to 250°C
500 9 to 5000 9
up to 1 Hz
1.5 mm to 300 mm
0,51°C
0,9 9
8,66 E-05 Hz
0,111 mm
SPRT and Calibration Baths
E2, F1 Class Weights
M140 Meatest Multifunction Calibrator
Linear Standard
Spray Rating
Linear
Timer
Volume
1.5 mm to 300 mm
up to 1 Hz
250 ml
0,111 mm
8,66 E-05 Hz
0,289 ml
Linear Standard
M140 Meatest Multifunction Calibrater
Balance, Distilled Water
Shirley Water Vapour Permeability
Linear
Speed
1.5 mm to 100 mm
10 rpm to 90 rpm
0,111 mm
0,006 rpm
Linear Standard
M140 Meatest Multifunction Calibrator
up to 10 9
10 to 100 9
100 to 1000 9
0,8 mg
0,8 mg
0,9 9
E2, F1 Class Weights
E2, F1 Class Weights
E2, F1 Class Weights
100 mm to 350 mm
% 0.1 to % 30
0.1 mm
0.02%
Linear Standard
Linear Standard
20% to 90 %
1.73%
MEASUREMENT
AREA
Textile Testing Machines
(continued)
Twist Tester
Mass
Yarn Tension Meter
Mass
Shrinkage SCHEDULE
Linear
Linear
Electronic Moisture Meter
Humiditv
..
RANGE & RESOLUTION
...
REFERENCE
EQUIPMENT
Humiditv Cabinet, Humidity Probe
Calibratıon and Measurement Capabılıty" iS the smallest uncertaınty of measurement that a laboratory can achıeve wılhın lls scope of accredılation when performıng more or less
routine calibralions of nearly ideal measuremenl standards or of nearly ideal measuring instrumenis. Calibration and Measurement Capabilities are expressed as uncertainties at
approximately the 95% level of confıdence. usually using a coverage faclor of k=2. The measuremenl uncertainty of a speclfıc calibralion performed by Ihe laboralory may be grealer
than the least uncertaınty due to the behavior of the customers device. to the enViron~libration
is performed in the fıeld). and to ınfluences from the circumstances of the
specifıc calibration.
•
October 31,2013
Commencement Date
•.
ACCREDITED
Print Date: 09/2612014
'

Similar documents

epiphot300/200 - Taylor Hobson Brasil

epiphot300/200 - Taylor Hobson Brasil MercuryLamp SocketB 100W EpiCollector

More information

“SHIMPO” Digital Tachometer Japan

“SHIMPO” Digital Tachometer Japan Photo Coupler input, Current 12mA (approx.)

More information