VLB 212 - valbony

L IV E O N STA G E
VLB212
SISTEMA LINEAL UNISSON VLB212
El VLB-212 es un sistema lineal compacto pero poderoso, para los amantes del sistema pasivo, diseñado para
aquellos que gustan de una excelente presión sonora y un control total.
Optimo en todas sus partes, equilibrado y versátil en su uso. Al fabricarlo pensamos primero en calidad que en
economía, pero logramos ambas.
www.valbony.com [email protected] 52 (33) 3637 8976
L IV E O N STA G E
SISTEMA LINEAL VLB212
CARACTERÍSTICAS: La caja acústica del VLB212 está fabricada con un exclusivo sistema de ensamble
encajonado cortado con precisión en ROUTER CNC las cuales pasan al área de armado, pegado, engrapado,
clavado y atornillado a mano bajo rigurosos lineamientos de calidad, formando una pieza sólida y fuerte.
DIFUSOR: Difusor de 6" instalado de aluminio de guías-hondas para driver salida de 1 1/4""
TERMINADO: POLIUREA color negro a 3 capas. Este material es el numero 1 en terminados de alta calidad,
mejorando la gran acústica de nuestros bafles y dandole una extraordinaria durabilidad y resistencia al uso e
intemperie. Un terminado de clase mundial. Es el material más resistente conocido en el mercado
Los frentes están protegidos con lámina de metal perforado y pintura electrostática, recubiertos de poroflex
impermeable.
RIGGING: Los herrajes están diseñados para dar al sistema lineal todas las posibilidades de cobertura
solicitadas para cada necesidad. Barrenos calculados y exactos para un montaje fácil y seguro, CON 0°, 1.5° , 3°,
4.5°, 6° 7.5°. Pernos activos con sistema de seguridad fabricados por nosotros. Los herrajes están recubiertos de
pintura electrostática del mismo color de la caja acústica. Los proyectos pueden surgir desde 4 cajas acústicas
hasta 16 por lado. (Ver ficha técnica del boomper VLB212)
Cobertura horizontal: 120°. Cobertura vertical: depende del ángulo elegido
COMPONENTES: 2 bocinas 12" y un driver 3" (no incluidos) con conectores NL4 perfectamente utilizable en
montajes de mediana necesidad a grandes eventos
DIMENSIONES: 87cm de ancho. 32cm de alto 45cm de fondo.
PESO: 22.2kg (sin componentes)
UNISSON
www.valbony.com [email protected] 52- (33) 3637 8976
Belisario Dominguez 3993-1 Huentitán el alto Guadalajara, Jalisc,o México CP:44390
L IV E O N STA G E
SISTEMA LINEAL VLB212
NOTA: Algunos elementos han sido omitidos a propósito para proteger propiedad intelectual.
VISTA LATERAL
VISTA FRONTAL
24.5cm
87cm
VISTA SUPERIOR
45cm
ISOMETRICO
UNISSON
www.valbony.com [email protected] 52- (33) 3637 8976
Belisario Dominguez 3993-1 Huentitán el alto Guadalajara, Jalisc,o México CP:44390
32cm
GRADOS DE POSICIONAMIENTO EN LINEARRAY
1+
1+
2-
2-
1-
AGUDO (+)
1-
2+
2+
AGUDO (-)
BOCINA
IZQUIERDA (+)
BOCINA
DERECHA (+)
BOCINA
DERECHA (+)
VLB-212
BOCINA
IZQUIERDA (+)
DIAGRAMA DE CONEXIÓN
CABLE ROJO ( + )
CABLE NEGRO ( - )
UNISSON
www.valbony.com [email protected] 52- (33) 3637 8976
Belisario Dominguez 3993-1 Huentitán el alto Guadalajara, Jalisc,o México CP:44390
8 OHMS
12LW30/N
12LW30/N
Nd LW30 S e r i e s
KEY FEATURES
•
•
•
•
•
•
•
•
Ultra light loudspeaker (3.83 kg. 8.43 lb.)
3” (77 mm.) voice coil
High sensitivity: 96 dB
High performance neodymium magnet system
Half the weight than a conventional ferrite model
Large Xmax: 5 mm.
Extra vented magnetic structure
Designed for extremely compact woofer applications
GENERAL DESCRIPTION
This 12” bass loudspeaker has been designed to achieve a very light loudspeaker with superior technical specifications. Thus,
the magnetic system incorporates a high energy neodymium magnet, reducing the total mass of the unit to less than 50% of a
conventional ferrite model. Moreover, the heat dissipation has been improved with the use of extra-cooling. The 12LW30/N
incorporates a 3” voice coil made with high quality materials: round copper wire with high temperature bonding strength and
polyimide former. The 12LW30/N is highly recommended for those woofer applications that require a light and small loudspeaker
with excellent technical specifications.
FREQUENCY RESPONSE AND DISTORTION CURVES
FREE AIR IMPEDANCE CURVE
Note: on axis frequency response measured with loudspeaker standing
on infinite baffle in anechoic chamber, 1w @ 1m.
PREDICTED LOW FREQUENCY RESPONSE
POWER COMPRESSION LOSSES
6
5
dB
4
3
2
1
0
50
Note: Bass-reflex cabinet, Vb=50 l, fb=40 Hz
150
250
350
450
Power (W)
Note: These losses are calculated from a five minutes AES power test
applying band limited pink noise (25-1200 Hz). The loudspeaker is free-air
standing.
12LW30/N
12LW30/N
Nd LW30 S e r i e s
TECHNICAL SPECIFICATIONS
Nominal diameter
Rated impedance
Minimum impedance
Power capacity *
Program power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
DIMENSION DRAWINGS
300 mm. 12 in.
8 ohms.
7.1 ohms.
450 w AES
900 w
96 dB 2.83v @ 1m @ 2π
35 - 5000 Hz
20 / 70 l 0.7 / 2.5 ft.3
77 mm. 3 in.
3.13 kg. 6.88 lb.
17.9 N / A
0.066 kg.
17 mm.
8 mm.
30 mm.
MATERIALS
MOUNTING INFORMATION
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
- Front mount
- Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
312 mm. 12.28 in.
294.5 mm. 11.59 in.
277.5 mm. 10.93 in.
280 mm. 11.02 in.
147 mm. 5.79 in.
4 l 0.11 ft.3
3.83 kg. 8.43 lb.
4.53 kg. 9.97 lb.
THIELE-SMALL PARAMETERS **
Resonant frequency, fs
D.C. Voice coil resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ηo (%)
Effective Surface Area, Sd (m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1 kHz
•
•
•
•
•
•
•
38 Hz
6.1 ohms.
6.6
0.3
0.29
109 l
267 µm / N
2.4 kg / s
2
0.0540 m2
5 mm.
268 cm3
1.4 mH
Voice coil: round copper wire with high temperature
bonding strength. Polyimide former able to withstand
high temperatures.
Cone: high stiffness paper cone.
Surround: treated cloth to assure good retaining of
elasticity in despite of continuing use.
Spider: cotton spider.
Metal parts: anti-corrosion coated to resist
aggressive environmental conditions.
Basket: specially designed die cast aluminium basket to avoid disturbing resonances.
Magnet: high energy neodymium magnet.
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**T-S parameters are measured after an exercise period using a preconditioning power test.
The measurements are carried out with a velocity-current laser transducer and will reflect the long
term parameters (once the loudspeaker has been working for a short period of time).
acústica beyma,s.a.
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: [email protected] ·
CP-755Nd/Al
CP-755Nd/Al
HIGH FREQUENCY
COMPRESSION DRIVER
TECHNICAL SPECIFICATIONS
Throat diameter
Rated impedance
Minimum impedance
D.C. Resistance
Power capacity *
Program power
Sensitivity **
Frequency range
Recommended crossover
Voice coil diameter
Magnetic assembly weight
Flux density
BL factor
36 mm. 1.4 in.
8 ohms
7.3 ohms @ 3.5 kHz
5.5 ohms
60 w AES above 0.8 kHz
80 w AES above 1.5 kHz
120 w above 0.8 kHz
160 w above 1.5 kHz
112 dB 1 w @ 1m
coupled to TD-565 horn
0.6 - 20 kHz
800 Hz or higher (12 dB/oct. min.)
72.2 mm. 2.87 in.
2.7 kg. 5.94 lb.
2.2 T
11.5 N/A
DIMENSION DRAWINGS
MOUNTING INFORMATION
Overall diameter
Depth
Mounting
Net weight
Shipping weight
145 mm. 5.70 in.
65 mm. 2.56 in.
Four M6 threaded holes, 90º apart on
101.6 mm (4 in.) diameter circle.
Mounting hardware is supplied.
2.96 kg. 6.51 lb.
3.21 kg. 7.06 lb.
MATERIALS
•
•
•
•
Diaphragm: aluminium.
Voice coil: edgewound aluminium ribbon wire.
Voice coil former: kapton.
Magnet: neodymium.
GENERAL DESCRIPTION
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.
This high frequency compression driver features a composite structure diaphragm. It has a Mylar surround to provide damping and
avoid resonant peaks typical of metal surrounds. The dome is made of pure aluminium, with its unique mechanical properties.
This diaphragm combined with a new optimized phasing-plug and a copper ring, results in an extremely smoothed and extended high
frequency response.
FREQUENCY RESPONSE AND DISTORTION CURVES
Note: on axis frequency response measured coupled to TD-565
horn in anechoic chamber, 1w @ 1m.
Note: on axis frequency response measured coupled to TD-595
horn in anechoic chamber, 1w @ 1m.
049
FREQUENCY RESPONSE AND DISTORTION CURVES
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: [email protected] ·
CP-755Ti
CP-755Ti
HIGH FREQUENCY
COMPRESSION DRIVER
TECHNICAL SPECIFICATIONS
Throat diameter
Rated impedance
Minimum impedance
D.C. Resistance
Power capacity
Program power
Sensitivity
Frequency range
Recommended crossover
Voice coil diameter
Magnetic assembly weight
Flux density
BL factor
36 mm. 1.4 in.
8 ohms
7.3 ohms @ 3.5 kHz
5.5 ohms
70 w AES above 0.8 kHz
90 w AES above 1.5 kHz
140 w above 0.8 kHz
180 w above 1.5 kHz
110 dB 1 w @ 1m
coupled to TD-565 horn
0.6 - 20 kHz
800 Hz or higher (12 dB/oct. min.)
72.2 mm. 2.87 in.
6.5 kg. 14.33 lb.
1.875 T
10 N/A
DIMENSION DRAWINGS
MOUNTING INFORMATION
Overall diameter
Depth
Mounting
Net weight
Shipping weight
192 mm. 7.56 in.
78 mm. 3.07 in.
Four M6 threaded holes, 90º apart on
101.6 mm (4 in.) diameter circle.
Mounting hardware is supplied.
6.75 kg. 14.85 lb.
7 kg. 15.4 lb.
MATERIALS
•
•
•
•
Diaphragm: titanium.
Voice coil: edgewound aluminium ribbon wire.
Voice coil former: kapton.
Magnet: ferrite.
GENERAL DESCRIPTION
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.
FREQUENCY RESPONSE AND DISTORTION CURVES
FREQUENCY RESPONSE AND DISTORTION CURVES
Note: on axis frequency response measured coupled to TD-565
horn in anechoic chamber, 1w @ 1m.
Note: on axis frequency response measured coupled to TD-595
horn in anechoic chamber, 1w @ 1m.
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: [email protected] ·
049
This high frequency compression driver features a composite structure diaphragm. It has a Mylar surround to provide damping and
avoid resonant peaks typical of metal surrounds. The dome is made of pure titanium, with its unique mechanical properties.
This diaphragm combined with a new optimized phasing-plug and a copper ring, results in an extremely smoothed and extended high
frequency response.
SM112/N
SM112/N
S M
S e r i e s
KEY FEATURES
•
•
•
•
•
High power handling (400 w AES)
3” (77 mm) copper voice coil with apical former
Optimum winding length for increased linear
excursion
Extended response in the medium frequency range
Designed for high power woofer applications
GENERAL DESCRIPTION
The design concept of this low frequency transducer arises from the need of achieve a more resistant loudspeaker that matches
the more and more power given by ultimate amplification systems. In order to accomplish that, almost every component of the
speaker has been reconsidered. The SM-112/N incorporates a 3” voice coil made with high quality materials: copper round wire
with high temperature bonding strength and apical former. Moreover, it features a powerful magnet system with rear air
ventilation. All these facts result in a 12” driver with extended and smooth low-mid frequency response, reduced harmonic
distortion, good efficiency and excellent power handling (400 w AES). The SM-112/N is specially recommended for woofer
applications.
FREQUENCY RESPONSE AND DISTORTION CURVES
FREE AIR IMPEDANCE CURVE
Note: on axis frequency response measured with loudspeaker standing
on infinite baffle in anechoic chamber, 1w @ 1m.
PREDICTED LOW FREQUENCY RESPONSE
POWER COMPRESSION LOSSES
5,0
dB
4,0
3,0
2,0
1,0
50
120
190
260
330
400
Power (W)
Note: Bass-reflex cabinet, Vb=70 l, fb=40 Hz
Note: These losses are calculated from a five minutes AES power test
applying band limited pink noise (25-1200 Hz). The loudspeaker is free-air
standing.
SM112/N
SM112/N
S M
TECHNICAL SPECIFICATIONS
Nominal diameter
Rated impedance
Minimum impedance
Power capacity *
Program power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
DIMENSION DRAWINGS
300 mm. 12 in.
8 ohms.
7.4 ohms.
400 w AES
800 w
97 dB 2.83v @ 1m @ 2π
35 - 4000 Hz
30 / 100 l 1.06 / 3.53 ft.3
77 mm. 3 in.
4.9 kg. 10.8 lb.
17.2 N / A
0.052 kg.
18 mm.
7 mm.
30 mm.
MATERIALS
MOUNTING INFORMATION
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
- Front mount
- Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
S e r i e s
312 mm. 12.3 in.
294.5 mm. 11.6 in.
277.5 mm. 10.9 in.
280 mm.
11 in.
138 mm. 5.43 in.
4.5 l 0.16 ft.3
5.65 kg. 12.45 lb.
6 kg. 13.23 lb.
•
•
•
•
•
•
•
Voice coil: copper round wire with high temperature
bonding strength. Apical former able to withstand
high temperatures.
Cone: high stiffness paper cone.
Surround: specially treated cloth surround.
Spider: cotton spider.
Metal parts: effective protection against corrosion.
Basket: specially designed die cast aluminium basket to avoid disturbing resonances.
Magnet: high Curie temperature ferrite.
THIELE-SMALL PARAMETERS **
Resonant frequency, fs
D.C. Voice coil resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ηo (%)
Effective Surface Area, Sd (m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1 kHz
38 Hz
6.5 ohms.
7.2
0.28
0.27
138 l
327 µm / N
1.8 kg / s
2.6
0.0550 m2
5.5 mm.
300 cm3
1.1 mH
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**T-S parameters are measured after an exercise period using a preconditioning power test.
The measurements are carried out with a velocity-current laser transducer and will reflect the long
term parameters (once the loudspeaker has been working for a short period of time).
acústica beyma,s.a.
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: [email protected] ·