Loudspeaker Accessories

Dynaudio Loudspeaker Accessories
Loudspeaker Accessories
Home Systems I Professional I Automotive I Multimedia
Stand¹
The Dynaudio Stand¹ was conceived as a
The base plate of the Stand¹ conceals four
slim profile, high value solution for any quality
height-adjustable spikes to allow precise leveling
compact monitor, offering a solid and stable
and added stability on a wide range of floors,
foundation that will allow the speakers an ex-
while the top plate features the provision for the
cellent platform to achieve a more optimized
optional four-cone spike assembly as well.
performance as compared to conventional
More importantly, the base plate and center column
stand designs.
of the Stand¹ also feature an intelligent cable
management provision. The speaker wire is run
Available in Silver or Black, the Stand¹ utilizes a
up from below the base plate assembly through
one-layer metal top plate and a single oval alu-
a channel in the column, yielding a very clean
minum column that can be filled with sand or
appearance and an elegant visual presentation
lead shot for additional mass – attached to a
that keeps the cables hidden. With its high value
threelayer base plate using the same sandwich
accented by its simple yet attractive design, the
construction of the plates in the Stand 4 model to
Stand¹ is the perfect choice for the compact
reduce resonance and offer additional damping.
Dynaudio Excite X12 or Focus 110 models.
Technical specifications:
Height (Stand):
Dimensions
(Top-Plate):
Dimensions
(Base-Plate):
Finishes:
63.5 cm / 25"
18.5 x 14.8 cm
7.3 x 5.8"
28.8 x 21 cm
11.3 x 8.3"
Silver
Black
Dynaudio Loudspeaker Accessories
Stand 3
1
2
Insert
The Dynaudio Stand³ perfectly complements
atop spikes (1). The base plate itself is also fitted
small and medium-sized modern compact
with spikes, which are adjustable in order to
loudspeaker designs.
achieve a perfect foundation for the loudspeaker
The slightly tilted elliptical profile post offers the
even on unlevel floors. Each spike can be adjus-
Stand³ a modern, dynamic shape. The high-quality
ted easily from the top side via an integrated
lacquer finish in High-gloss White or Black ideally
bolt. By fastening the corresponding nuts, the
elegantly complements any interior. Either hue
position can be fixed (2). The Stand³ cable ma-
matches perfectly with the Dynaudio Focus 110
nagement system neatly conceals the speaker
and 110 A and Excite X12 loudspeakers, espe-
cable, as it is routed through the base plate (3)
cially when these models are finished in the res-
up through a separate channel of the post (1).
pective lacquer variants. The Stand³ may of
The slim yet durable steel and aluminium const-
course also be utilized with a wide range of com-
ruction is extremely torsion-resistant and stable;
pact loudspeaker offerings. The speaker is positi-
for addtional damping and mass the post can be
oned on the Stand³ top plate either directly or
filled with sand or similar material.
3
Technical Specifications:
Height (Stand):
62,0 cm / 24.4"
Dimensions
(Top-Plate):
19,0 x 14,0 cm
7.5" x 5.5"
Dimensions
(Base-Plate):
21,4 x 30,0 cm
8.4" x 11.8"
Finishes:
High-gloss white
High-gloss black
Stand 4
The Dynaudio Stand 4 was specifically
quality from the speakers by further isolating
developed to enable maximum performance
from resonance while offering a firm platform.
from any high quality compact loudspeaker
The intelligent cable management system allows
design. The elegant lines and attractive design
the speaker wire to be run up from below the
of the Stand 4 offer a much more stylistic
base plate assembly through the column to yield
approach versus conventional loudspeaker
a very clean and more elegant visual presentation
stand constructions.
by keeping the cables hidden from view. The
The Stand4 utilizes a unique three-layer sand-
columns can both be filled with sand or lead shot
wich construction in the top and base plates. A
to easily add mass and weight to the assembly,
special layer of damping material fitted between
thus providing additional stability and resonance
the steel top and base tiers of the plates serves
damping.
to reduce resonance, allowing the speakers to
The Stand4 is available in high quality Silver or
reach their maximum performance capabilities.
Black finish. The Stand4 is an ideal solution for
The base plate conceals four height-adjustable
any high quality compact monitor such as the
spike assemblies that allow precise leveling
Excite X16 or the Focus 140.
while providing perfect stability on avariety of
The Dynaudio Contour S 1.4 and Confidence C1
floor surfaces.
models feature plinths pre-threaded to accom-
The top plate features a provision for the optional
modate the stand assembly without the need for
four-cone spike assembly which is recommended
the top plate, thus forming both a very stable
by Dynaudio to achieve the highest performance
foundation and a perfectly homogenous design.
Technical specifications:
Height (Stand):
65 cm / 25.6"
Dimensions
(Top-Plate):
23.5 x 19 cm
9.3 x 7.5"
Dimensions
(Base-Plate):
Finishes:
30 x 24 cm
11.8 x 9.4"
Silver
Black
Center Base
The center channel is not to be considered
suited for a wide range of center channel models.
an effects speaker; it is essentially as vital as
The Center Base itself is provided with two pair
the mains in any quality system.
of tilt wedges that offer four selectable pitch
As the performance is undoubtedly influenced by
angels of 4° or 8.8° upwards or downwards
the placement, it is important to direct the sound
each, for selectable directivity in either regard.
radiation properly into the room.
The Center Base is ideal for use with the
For the most involving home theater experience,
Excite X22 or the Focus 200 C centers, as well
a center channel needs to be placed in close
as the Contour S C or even S CX models.
proximity to the screen and accurately project
It also can be used with the optional spikes
its sound into the listening area. This would
integrated into its base plinth, allowing greater
typically require that the center channel be
resonance damping while offering leveling
positioned just below or above the screen while
capabilities. Fitting the speaker to the Center
the speaker would need to be tilted upwards or
Base is fairly straightforward and the complete
downwards respectively.
assembly allows for unobtrusive positioning of
The Dynaudio Center Base will allow the speaker
the center channel loudspeaker either above or
to be angled upwards or downwards, and is
below the video display.
Technial specifications:
Dimensions
(W x H x D):
35 x 6 x 25 cm
13.8 x 2.4 x 9.8"
Wedge 1 pitch:
+/- 4°
Wedge 2 pitch:
+/- 8.8°
Center Base²
The Dynaudio Center Base² was designed
placed above or below the screen and indepen-
for ambitious audio/video systems where
dent of the height of the center or the screen.
the highest level of refinement and tuning
The Center Base² was derived from the integrat-
possibilities are required.
ed module fitted to the Dynaudio Confidence
It incorporates a massive, 40 mm thick plinth that
Center model. It features a concealed spike as-
also integrates an intelligently conceived alumini-
sembly similar to that used in the bases of the
um adjustment mechanism that allows one to
Dynaudio Contour and Confidence floor standing
precisely set any dispersion angle of the speaker
models, adding further resonance damping as
cabinet as a whole – either upwards or down-
well as the possibility to adjust for precise level-
wards – anywhere between 10 degrees in either
ing from the top. The Dynaudio Center Base² is
direction. The complete construction allows a
an ideal complement to the Contour S CX, and
perfect sonic integration and placement of the
two units can be used together to support the
center channel into any home cinema setup,
Evidence Center model and further optimize the
regardless of whether the speaker is to be
incredible dispersion character of this loudspeaker.
Technial specifications:
Dimensions
(W x H x D):
Adjustable pitch:
35 x 9.5 x 25 cm
13.8 x 4 x 9.8"
-10° to +10°
Ocos
Loudspeaker Cable
IMPEDANCE OF LOUDSPEAKER CABLE
A high quality loudspeaker cable is indis-
a unique loudspeaker cable in response to this
pensable for achieving an authentic repro-
quest: Dynaudio Ocos.
Impedance (ohms)
duction of music. Even the finest loudspeaker
Other loudspeaker cable
Ocos loudspeaker cable
Frequency (Hz)
is only as good as the connection allows.
Ocos is short for Optimal Connection System -
Due to its unique characteristic properties and
the optimal link. The well-balanced, high-resolu-
innovative technology, Ocos remains exception-
tion sound is the result of Ocos’ unique physical
ally neutral while delivering remarkable detail and
properties, achieved through a special coaxial
imaging. No other loudspeaker cable brings out a
cable design based on scientific principles and
loudspeaker’s sound quality like Ocos.
an accurately defined conductive insulation:
Dynaudio Ocos is the first and only loudspeaker
Since the origins of stereo, music lovers have
cable with a low characteristic impedance, mir-
been on a quest for the optimum sound. Along
roring the typical loudspeaker impedance – and
with a perfect recording, a high-grade amplifier
remaining constant throughout the entire frequency
and outstanding loudspeakers, the speaker cable
range. This consistency is retained at any length –
is an important factor in high-end reproduction.
for example, the right speaker cable can be longer
Dynaudio engineers, in collaboration with Swiss
than the left one. The characteristics will remain
cable specialist Huber+Suhner, have developed
stable even at a length of 100 metres.
Dynaudio Ocos One – Ocos loudspeaker cable with one single run for high quality high-end hi-fi systems.
Dynaudio Ocos Pro – Dual runs of Ocos cable for premium grade high-end systems.
Dynaudio Ocos Ultra – Three runs of Ocos cable for ultimate performance high-end systems.
Dynaudio Ocos loudspeaker cable is available in various lengths, terminated on both ends with gold-plated
cable-end sleeves or with WBT nextgen™ banana plugs or spades. Further information on Ocos is available
online at www.dynaudio.com/ocos.
Dynaudio A/S, 8660 Skanderborg, Denmark
Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 4108 - 41 80 - 0
www.dynaudio.com
SF1
Compact Loudspeaker Base
Technical Specifications:
Dimensions (W x D):
silver, black
WSB1
underlying foundation. Furthermore, the tilted
loudspeakers upon sideboards, shelves or
speakers take on a more attractive appearance,
desks.
elegantly integrating into any interior. The SF1
The SF optimizes loudspeaker performance
Base is available in matte black or silver. It is
with minimum effort or space: The SF1 places the
ideal for use with the Dynaudio Focus 110, 110 A,
speaker with a slight upward tilt, thus minimizing
and 140, Excite X12 and X16 models, as well, of
the impact of surface reflections on the sound
course, with many other compact loudspeakers.
Loudspeaker Wall Mount Bracket
Technical Specifications:
Dimensions
Base Platte (W x D):
quality which would otherwise occur from the
sitioning small or medium-sized compact
1
18,7 x 20,8 cm
7.4" x 8.2"
Finishes:
The Dynaudio SF1 is the ideal base for po-
11,4 x 21,0 cm
4.5" x 8.3"
The Dynaudio WSB1 is an exceptionally sturdy
secured to such by screws at the bottom. The
wall mount bracket ideal for small and medium-
double-jointed steel construction facilitates posi-
sized compact loudspeakers.
tioning the speaker within a wide range of adjust-
The WSB1 allows for simple yet secure wall
ment. The WSB1 is available in high-gloss white
mounting of passive as well as active loud-
lacquer or matte black. It perfectly suits the Dyn-
speakers – even heavier models. The speaker is
audio Focus 110, 110 A and 140, Excite X12 and
Capacity:
25 kg
not hung with the bracket fixed to its backside,
X16, and MC 15 models, but also many other
Finishes:
High-gloss white, black
but rather it is set on the WSB1 base plate and
compact loudspeakers.
TV1
Video Wall Mount Bracket
Technical Specifications:
Dimensions min. (W x H):
Wall distance TV:
23,0 x 23,0 cm
9.0" x 9.0"
10,0 to 44,5 cm
3.9" to 17.2"
Horiz. / vert.
angle of rotation:
infinitely adjustable
Capacity:
30 kg
Finishes:
silk-mat black
TV4
The Dynaudio TV1 is a perfect wall mount so-
the horizontal turning angle is only limited by the
lution for TV Displays between 21" to 37" in
width of the monitor‘s case. The vertical tilt angle
diameter.
can be adjusted precisely and then fixed in order
The rigid steel construction equipped with three
to achieve a perfect orientation to the viewing
stable joints allows secure and versatile positioning
position. The solid mounting plate and four addi-
of TV displays within a wide range of articulation
tional swivel-mounted arms with slotted holes
adjustment. The monitor may easily be moved
facilitate the easy and safe installation of any
up to a wall distance of 44,5 centimeters (17.2");
monitor.
The Dynaudio TV4 is a highly-stable and
wide range by just two fingers. The distance from
secure wall mount for TV Displays between
the wall can be extended up to 47 centimeters
37" to 55" diameter.
(18.5") and the horizontal turning angle is only
With the TV4 articulating wall mount bracket,
limited by the width of the monitor’s case. The
even large, heavy flat panel video displays
vertical tilt angle can be adjusted precisely and
can be effortlessly handled. The sophisticated
then fixed to achieve a perfect orientation to the
mechanics allow the smoothest adjustments:
viewing position. The TV4 installs simply and can
The set can easily be moved within an extremely
be used with any display.
Video Wall Mount Bracket
Technical Specifications:
Dimensions (W x H):
Wall distance TV:
Horiz. / vert.
angle of rotation:
74,1 x 57,3 cm
29.2" x 22.6"
7,0 - 47,0 cm
2.8" to 18.5"
infinitely adjustable
Capacity:
50 kg
Finishes:
silk-mat black
Wall Mount
Technical specifications:
Width:
16,5 cm / 6.5"
Height:
16,5 cm / 6.5"
The Dynaudio Wall Mount bracket was
designed to work particularly well with the
Dynaudio compact monitors, providing
such with a veryrigid and extremely stable
support.
It allows the speakers to perform at optimum levels
in a wide variety of positions when it is required
that they be mounted on the wall, thus enabling
proper sound dispersion and offering the ability
to minimize room reflections.
The unique curved shape adds strength to the
bracket’s mounting assembly, while the resulting
swivel joint offers the flexibility of both vertical
and horizontal adjustment capabilities, enabling
the speakers to be precisely angled to obtain the
optimum listening axis in any room.
The Wall Mount bracket was primarily intended for
use with compact models and aids considerably
in completing side or rear speaker installations in
multichannel system setups.
Dynaudio A/S, 8660 Skanderborg, Denmark
Sales & Marketing
Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 4108 - 41 80 - 0
www.dynaudio.com
© Dynaudio International GmbH, Accessories Brochure INT 0408, Item No. 466910. All text and image copyrights reserved. Subject to change without notice.