Spit Epcon C8 Extreme Performance Epoxy Resin NEW Spit Epcon

NEWEpcon
Spit Epcon
C8 Extreme
Performance
Epoxy Resin
Spit
C8 Extreme
Performance
Epoxy Resin
Extreme performance resin,
specifically formulated for
extreme rebar and stud
applications. With virtually no
odour, NEW Epcon C8 is easy
to inject at low temperatures
and is approved for use in wet
and diamond drilled holes.
�
�
NEW
The new Epcon C8 is the first
resin to achieve an ETA for rebar
applications.
WRAS approved for the
maintenance or installation of
water treatment systems and
associated applications.
Approval number 0901501.
NO
unpleasant
ODOUR
�
NF approved (meets requirements
for creep resistance).
FIRE
TESTED
CSTB fire tested.
Application Tools
Eurocode & Description
• Eurocode: 050085 Epcon C8 Cartridge (450ml)
+ 1 Nozzle + 1 Extension
Qty
1
Technical Specification
• Pure Epoxy
• Minimal shrinkage: 0.05%
• High bond strength: 20 N/mm2
• ETA - European Technical Approval
Qty
1
• Eurocode: 050068*
Epcon 450ml Pneumatic Injection Tool
* Order to order, minimum order quantities apply.
Qty
1
• Eurocode: 050069
Application Nozzle with Extension
Qty
1
Product Advantages
Installation
• Suitable for use in oversized holes
• Easy to inject at low temperatures
• Reliable performance at high temperatures - 100% performance at 60ºC, 70% performance at 80ºC
Substrates
• Concrete
• Solid brick
• Solid stone
• Solid block
• Hollow brick
• Eurocode: 050067
Epcon 450ml Manual Injection Tool
• Hollow slab
• Hollow block
• Plasterboard
• Aerated concrete
• Submerged installations
• Installing process & ancillary equipment
• Water treatment
• Pumps and pipework
• Fixing steel framed structures
• Fixing machinery (resistant to vibration)
• Electric insulation (high dielectric strength 10,000V)
• Protective barriers, safety rails
• Rebar installation
• Starter bar installation
• Applications subject to dynamic loads
2
• Virtually no odour
• Phenol and Styrene free
3
• Two year shelf life - Reduces risks associated with holding stock
4
• 450ml cartridge
Applications
1
• High performance injection tool
- Reduces effort required for application
• Works in damp and underwater
• Minimum shrinkage - Improves long term performance in freeze / thaw cycles
• Vibration resistant
5
6
7
• Reduces anchor spacing and edge
distances
Technical Helpline UK: 0800 731 4924
Technical Helpline ROI: 1 800 882 388
For details of threaded studs and
accessories, see pages 120 - 122.
114
www.itwcp.co.uk