For MENA Region

Don Construction Products
Product Summary
Don Construction Products
Hong Kong
DCP Operating Companies
DCP Trading
Company Profile
Don Construction Products
Don Construction Products (DCP) has accumulated over 80 years of experience in developing,
manufacturing and marketing innovative construction materials. DCP has operations in Europe,
Africa, Middle East and Asia with 14 manufacturing locations and a distribution network to over 25
countries.
DCP Timeline
1927
1928
1986
1997
2000
2005
2010
Company set up as Akis Chemicals Company Ltd., in Doncaster, UK.
Company merged with Francois Chemicals Ltd.
Management buyout and the company rebranded as Don Construction Chemicals.
F. Ball and Co. Ltd., UK’s leading manufacturer of flooring adhesives and floor preparation materials acquires Don Construction Chemicals and renames the company as Don Construction Products (DCP).
G.R.A.B. Resins of the UK, a 1995 F. Ball and Co. Ltd. acquisition, is integrated into DCP.
DCP sign a license agreement with Ayla Construction Chemicals for the Middle East.
DCP merged with Ayla Construction Chemicals expanding operations into the Middle East.
DCP Commitments
Expertise
DCP provides exceptional level of expertise and support services both at the office and on site.
Quality
All products are produced to comply with the best relevant international standards.
Full Range
DCP offers a comprehensive range of products covering a wide range of civil and aesthetic requirements of construction projects.
Expertise Provided
•
•
•
•
•
•
Properly equipped laboratories in every country to service clients.
Concrete mix designs and evaluations carried out in each country.
Understanding all business units from the client’s point of view.
Technical site support.
Short lead time for shipment dispatch from time of order.
Continuous training programs to expand staff and customer knowledge.
1
Company Profile
Quality Assurance
• Fully equipped R&D laboratories covering diverse climatic and application conditions.
• Continuous R&D activities ensuring a leading market position and full product range.
• Strong commitment to introduction of new innovative products to market.
• Tuning of products to suit local environment conditions while maintaining the right product performance.
• Enduring product performance evaluation and benchmarking.
• Unending upgrading of products through cost engineering and introducing new raw materials.
Full Product Range
The focus of our full product range below caters to our 3 core business units: Concrete &
Cement Technology, Construction Projects Materials Technology & Building Finishing Products.
Concrete Admixtures
Sealants & Joints
Surface Treatments
Waterproofing
Grouts & Anchors
Adhesives
Concrete Repair
Tile Adhesives & Grouts
Flooring Systems
Building Finishing Products
Protective Coatings
Structural Strengthening
DCP’s HSE Commitment
• Do everything reasonably practicable to prevent accidents, injuries and work related ill health.
• Comply with, and where practical, exceed all applicable legislation, adopted codes of practice and other requirements. Where none exist, set and adhere to stringent standards based on DCP’s best practices.
• Actively involve and encourage all employees in the achievement of DCP’s objectives.
• Appoint competent people to assist in meeting statutory duties including external HSE performance.
DCP’s Environment Commitment
Our commitment to the environment, low CO2 foot print and low dust emissions enables
us to operate production close to residential areas where the most stringent environmental
regulations exist. We commit unreservedly to this directive since these residential areas are
our homes and backyards.
2 DCP Product Summary
Table of Contents
Concrete Admixtures4
Surface Treatments7
Grouts & Anchors8
Concrete Repair10
Flooring Systems13
Protective Coatings18
Sealants & Joints21
Waterproofing 23
Adhesives26
Tile Adhesive & Grouts28
Building Finishing Products30
Structural Strengthening 32
3
Concrete
Admixtures
Indispensable components to modern
concrete production, for enhancing and
modifying vital concrete and cement
characteristics.
Name
Description
Highlighted Uses
Standards
Recommended
Dosage
1.1 Mortar Plasticiser
Trowelite P
High range mortar
plasticiser
• Sand cement mortar admixture that improves:
-- Workability
-- Surface finish
-- Cohesion
-- Resistance to freeze/thaw cycles
Trowelite WP
Integral liquid
waterproofing
admixture for mortars
• Sand cement mortar waterproof admixture that improves:
-- Hydrophobic properties and minimizes penetration of moisture and
water dissolved salts
-- Workability
-- Cohesion
BS 4887-1
BS EN 934-3
0.3 - 0.6
litres/100 kg
of cement
1.0 - 1.4
litres/20 litre
of water in the
mix
1.2 NRWR Plasticisers & Retarders
Flocrete P10
Water reducing
admixture
• Produce high quality concrete by improving durability and water
tightness
• Improves cohesion within concrete mixes
ASTM C494, Type A
BS 5075-1
BS EN 934-2
0.2 - 1.1
litres/100 kg
of cement
0.3 - 0.9
litres/100 kg
of cement
Flocrete RP55
Flocrete RP66
Retarding and water
reducing admixture
Flocrete RP305
• Long concrete deliveries, hot weather concreting and other
applications where high workability retention and retardation are
required
• Produce high quality concrete by improving durability and water
tightness
• Improves cohesion within concrete mixes
ASTM C494, Types B & D
BS 5075-1
BS EN 934-2
0.3 - 0.8
litres/100 kg
of cement
0.3 - 0.7
litres/100 kg
of cement
0.3 - 0.7
litres/100 kg
of cement
Flocrete RP320
1.3 HRWR Plasticisers
Flocrete SP124
High performance
water reducer
admixture for HSC
• To produce high quality concrete of improved durability and water
tightness
• Recommended for high strength concrete mixes
• Improved cohesion allows for use in mass concrete pours and piling
ASTM C494, Type G
BS 5075-3
BS EN 934-2
1.0 - 3.0
litres/100 kg
of cement
Flocrete SP33
High range
water reducing
superplasticiser
admixture
• Low water cement ratio, high strength concrete
• To accelerate early strength development
• To produce high quality concrete of improved durability and ater
tightness
• Pre-cast concrete
ASTM C494, Type A & F
BS 5075-3
BS EN 934-2
0.8 - 2.8
litres/100 kg
of cement
4 DCP Product Summary
Concrete
Admixtures
Name
Flocrete SP90S
Description
Highlighted Uses
Standards
Recommended
Dosage
0.8 - 2.1
litres/100 kg
of cement
High range water
reducing admixture
with workability
retention properties
• Long distance and hot weather concrete deliveries
• Where high workability retention and retardation are of prime
importance
• To produce high quality concrete of improved durability and water
tightness
Flocrete SP100
High performance
water reducing
admixture for HSC
• Recommended for high strength concrete mixes
• Improved cohesion allows for use in mass concrete pours and piling
• To produce high quality concrete of improved durability and water
tightness
Flocrete SP42
High range concrete
superplasticiser
admixture
• To increase workability retention of fresh concrete
• To provide increased ultimate strength by reducing water demand
in concrete mixes
• To produce high quality concrete of improve durability by reducing
permeability
High range
workability retention
concrete admixture
• Long distance and hot weather concrete deliveries
• To increase workability retention of fresh concrete
• To provide increased ultimate strength by reducing water demand
in concrete mixes
• To produce high quality concrete of improved durability by
reducing permeability
ASTM C494, Type B, D & G
Hyperplast PC711
High performance
concrete
admixture based
on polycarboxylic
polymers for concrete
with low water
cement ratio
• Self compacting concrete
• Structures with congested reinforcement
• High strength and high performance concrete
• Pre-cast concrete
• Improved cohesion allow for use in mass concrete pours and piling
ASTM C494, Type G
0.3 - 1.7
litres/100 kg
of cement
Hyperplast ES901
High performance
early strength
concrete
hyperplasticiser
admixture
• Structures with congested reinforcement
• High strength and high performance concrete
• Pre-cast concrete
• Improved cohesion allow for use in mass concrete pours and piling
• Self compacting concrete
ASTM C494, Type E & F
0.5 - 3.0
litres/100 kg
of cement
Hyperplast PC600
High performance
polycarboxylic
based concrete
superplasticiser for
durable and high
performance concrete
• High strength and high performance concrete
• Pre-cast concrete
• Improved cohesion allow for use in mass concrete pours and piling
• High durability concrete
• Structures with congested reinforcement
• For high levels concrete pumping
• Self compacting concrete
ASTM C494, Type G
BS EN 934-2
0.5 - 2.5
litres/100 kg
of cement
Flocrete SP95
Flocrete SP40
ASTM C494, Type B, D & G
BS EN 934-2
ASTM C494, Type G
ASTM C494, Type B, D & G
0.9 - 3.0
litres/100 kg
of cement
1.0 -2.8
litres/100 kg
of cement
0.8 - 2.0
litres/100 kg
of cement
0.8 - 1.75
litres/100 kg
of cement
For HSC:
1.0 - 2.75
litres/100 kg
of cement
1.4 Hyperplasticisers
0.5 - 2.5
litres/100 kg
of cement
Hyperplast PC200
Hyperplast PC260
Hyperplast PC155
High performance
concrete
superplasticising
admixture
• High strength and high performance concrete
• Structures with congested reinforcement
• Pre-cast concrete
• Self compacting concrete
• Improved cohesion allow for use in mass concrete pours and piling
ASTM C494, Type A & G
0.5 - 3.0
litres/100 kg
of cement
ASTM C494, Type F, G
BS EN 934-2
0.5 - 3.0
litres/100 kg
of cement
5
Concrete
Admixtures
Name
Description
Highlighted Uses
Standards
Recommended
Dosage
1.5 Air Entrainers
Cemairin 260
Air entraining
admixture for
concrete
• In concrete mixes for roadways, airport runways and other concrete
exposed to potential frost damage
• To increase the durability of concrete and its resistance to damage
by frost and de-icing salts
• To increase cohesion of concrete mixes to overcome bleed,
segregation and sand runs where poorly graded aggregate with
high fine content needs to be used
ASTM C260
BS 5075-2
BS EN 934-2
0.05 - 0.3
litres/100 kg
of cement
1.6 Integral Waterproofing
Flocrete W50
High performance
permeability and
absorption reducing
admixture
• In combination with Flocrete W52 or any other high performance
superplasticisers from DCP to produce high quality concrete of
improved durability by reducing concrete permeability and water
absorption
Flocrete W52
High range concrete
superplasticiser and
permeability reducing
admixture
• To produce high quality concrete of improved durability by
reducing permeability
• To increase workability retention of fresh concrete
• To provide increased ultimate strength gain by reducing water
demand in concrete mixes
Flocrete W66
Integral waterproofing
admixture
• To produce concrete with lower permeability
• For water retaining structures and concrete substructures
2.0 litres/100 kg
of cement
• All types of steel reinforced concrete that will be exposed to
chlorides environments or de-icing salts
• Provide protection against corrosion in reinforced concrete
ASTM C494, Type C
7.5 – 30
litres/m3
depending on the
chloride exposure
conditions
ASTM C494, Type C & E
BS 5075
BS EN 934-2
Typical dosage
is between
1% - 2% of
cement content,
depending on
cement content
and outside
temperature
1.0 - 2.3
litres/100 kg
of cement
ASTM C494, Type B, D & G
1.0 - 2.4
litres/100 kg
of cement
1.7 Corrosion Inhibitor
Flocrete CN30
Corrosion inhibiting
admixture for
reinforced concrete
containing a
minimum of 30% of
calcium nitrate
1.8 Antifreeze
• Concrete casting at low temperatures (Freezing point: -18°C)
• Expected overnight frost
• Early concrete strength requirements
• High strength concrete
Flocrete
Antifreeze Plus
Cold weather
water reducing and
antifreeze concrete
admixture that is
chloride free
Flocrete SP5000J
• Concrete casting at low temperatures (Freezing point: -14°C)
• Expected overnight frost
• Early concrete strength requirements
• High strength concrete
• Can be used as a sole additive to achieve required concrete
performance at very low temperatures
6 DCP Product Summary
Surface
Treatments
To improve concrete surfaces, aiding in the
curing of concrete or facilitating its release
from formwork.
Name
Description
Highlighted Uses
Standards
Recommended
Coverage Rate
2.1 Curing Compounds
Setseal 22
Water based curing
compound formulated from
selected emulsified paraffin
with good curing efficiency
Setseal 33
Water based curing
compound formulated from
selected emulsified paraffin
with improved curing
efficiency
Setseal 44
Water based curing
compound formulated
from selected emulsified
paraffin with excellent curing
efficiency
Setseal A
Multipurpose, solvented
resin based concrete curing
compound and hardener
Setseal AW
Multipurpose, non-solvented
resin based concrete curing
compound and hardener
4 - 6 m²/litre
• Newly cast concrete in areas such as:
-- Runways and roads
-- Roof decks
-- Retaining walls
-- Irrigation canals
-- Concrete floors
-- Columns and underground foundations
• Available as clear or white pigmented liquid
AASHTO M148 & ASTM C309,
Types 1 & 2, Class A
4 - 6 m²/litre
3 - 5 m²/litre
• Newly cast concrete in areas such as:
-- High rise construction to eliminate water curing
-- Runways and roads
-- Roof decks
-- Retaining walls
-- Irrigation canals
-- Concrete floors
-- Columns and underground foundations
AASHTO M148 & ASTM C309,
Type 1, Class B
4 - 5 m²/litre
AASHTO M148 & ASTM C309,
Type 1, Class A
5 m²/litre
2.2 Release Agents
Formcoat S
Solvent based mould release
agent
Formcoat WB
Water based formwork
release agent
Formcoat WS100
Formwork chemical release
agent
30 - 70 m²/litre
• Most types of formwork allowing for :
-- Easy stripping of formwork
-- Improving concrete finish
VOC < 10 g/l
35 - 65 m²/litre
VOC < 20 g/l
30 - 70 m²/litre
7
Grouts &
Anchors
Designed to fill gaps in or between
structural elements in addition to installing
anchors.
Name
Description
Highlighted Uses
Standards
Approximate Yield
3.1 Grout Additives & Admixtures
Flo-Add 1
Flo-Add C
Flo-Add HF
Expansive and plasticising grout
admixture
Free flow non-shrink grout additive
for post tensioned cables
Hydrogen free expansive and
plasticising grout additive
• Bed plate grouting
• Duct grouting
• Grouting tunnel lining
• Non-shrink infilling grouts
• Post tensioned cables
ASTM C109:
Compressive strength
@ 28 days
> 45 MPa
(without sand)
> 50 MPa
(with sand)
Flo-Add 1
227 g
50 kg
227 g
50 kg
Flo-Add C
• Duct grouting
• Post tensioned cables
• Pre-stressed structural elements
• Where an expansive and
flowable grout is required
ASTM C1107, Grade A
ASTM C109:
Compressive strength
> 25 MPa @ 1 day
> 50 MPa @ 7 days
> 60 MPa @ 28 days
OPC
Sand
50 kg
General purpose non-shrink chloridefree cementitious grout with excellent
flow properties
Flo-Grout 3
General purpose non-shrink chloridefree cementitious grout with high
early strength
Flo-Grout HF1
Flo-Grout HFR
• General purpose grouting
• Machine beds
• Stanchion bases, struts, railings &
guardrail assemblies
• Void filling of shutter tie rod
openings
• Anchoring of tie bars and bolts
• Pile top re-profiling
ASTM C1107, Grade A
High flow non-shrink chloride and
hydrogen-free pourable precision
grout
• Machine beds
• Bridge bearing pads and plinths
• Under machinery base plates,
crane rails, stanchion plates, etc.
• Anchoring of tie bars, bolts and
stressing cables
• Underpinnings
ASTM C1107, Grade C
U.S. Corps of Engineers
Specifications:
CRD–C621-82A
High flow non-shrink chloride- and
hydrogen-free cementitious precision
grout with excellent flow properties
• Pile cap re-profiling
• Machine beds
• Bridge bearing pads and plinths
• Under machinery base plates,
crane rails, stanchion plates etc.
• Anchoring of tie bars, bolts, and
stressing cables
• Underpinning
8 DCP Product Summary
37 litres
23 ± 2
litres
59 litres
Water
Yield
6 kg
100 kg
35 ± 2
litres
68 litres
Flo-Add HF
OPC
Water
Yield
50 kg
15 ± 2
litres
32 litres
520 g
13.5 – 14 litres/25 kg bag
13.5 – 14 litres/25 kg bag
ASTM C1107, Grade C
U.S. Corps of Engineers
Specifications:
CRD–C621-82A
Yield
OPC
3.2 Cementitious Grouts
Flo-Grout 2
Water
21 ± 2
litres
13 – 13.5 litres/25 kg bag
13 – 13.5 litres/25 kg bag
Grouts &
Anchors
Name
Description
Highlighted Uses
Standards
Approximate Yield
Flo-Grout BP800
Non shrink cementitious bearing
pads precision grout with high early
strength
• Bridge bearing pads
• Pile cap treatments
• Heavy stanchion bases
• Base plates where high early
strength grout is required
ASTM C1107, Grade C
U.S. Corps of Engineers
Specifications:
CRD–C588-79
CRD – C621
14 – 15 litres/25 kg bag
Flo-Grout CR
Free flow non-shrink grout for post
tensioned cables that reduces
the ingress of harmful agents and
protects the cables from corrosion
• Post tensioned cables used in
bridges, deck ducts, etc.
• Cable duct grouting
• Pre-stressed structural elements
• For excellent bonding to steel
EN 447 when tested
in accordance with
EN455, EN196-1 and
EN196-3
13 – 13.5 litres/ 20 kg bag
High flow heat resistant (up to 400°C)
cementitious precision grout
• For grouting areas where high
temperature resistance and high
early strength grout is required
ASTM C1107, Grade A
U.S. Corps of Engineers
Specifications:
CRD–C588-79
CRD – C621 in terms of
workability
13 – 14 litres/25 kg bag
High flow non-shrink cementitious
grout for underwater application with
high resistance to cement washout
• Underwater micro concrete
repair and grouting
• Bridge column and jetty piers
• Repairing of concrete piles
• General strengthening by
jacketing
• Repair and grouting of dams
ASTM C109:
Compressive strength
≥ 22 MPa @ 1 day
≥ 34 MPa @ 3 days
≥ 38 MPa @ 7 days
≥ 45 MPa @ 28 days
14.5 – 15 litres/25 kg bag
Ambient working
temperatures:
5 - 35°C
10 litres/20 kg pack
Ambient working
temperatures:
10 - 40°C
10 litres/20 kg pack
Ambient working
temperatures:
15 - 55°C
7.5 litres/15 kg pack
Ambient working
temperatures:
15 - 35°C
50.5 litres/106.5 kg pack
Flo-Grout HT
Flo-Grout UW
3.3 Epoxy Grouts
Flo-Grout EP260
High strength, pourable epoxy resin
grout suitable for gaps from 10 to
100 mm
Flo-Grout EP270
High strength, pourable epoxy resin
grout suitable for gaps from 10 to
150 mm
Flo-Grout EP330
High strength, low exothermic,
pourable epoxy resin grout suitable
for gaps from 10 to 400 mm at high
ambient temperatures
Flo-Grout EPCG
High strength, adjustable, pourable
epoxy foundation resin grout suitable
for gaps up to 300 mm
• Machine base plates
• Heavy crane rails
• Bearing plinths
• Pile top waterproofing
• High speed turbines
• Anchoring of steel fixings
• Grouting areas where occasional
chemical spillage may occur
3.4 Anchor Grouts
Keyfix AE100
High strength, fast cure, styrene free
epoxy acrylate resin cartridge system
for anchoring
Keyfix E
High strength, fast cure epoxy resin
cartridge system for anchoring
Keygrout
High strength, fast curing polyester
grout for anchoring and fixing
• Bonding of concrete reinforcing
bars and securing profiled
sections and bars
• Permanent installation of:
-- Starter bars, steel rods, dowel
bars
-- Wall ties, bolts, hand rails
-- Safety fences
-- Railway tracks
-- Ground anchors
• Permanent installation of:
-- Starter bars, steel rods, dowel
bars
-- Wall ties, bolts, hand rails
-- Safety fences
-- Railway tracks
-- Ground anchors
Volume of grout (ml) =
3.14 * (Dh2 – Db2) * H
4000
ASTM C881, Type 4,
Grade 3, Class A, B & C
Where:
Dh is hole diameter in mm
Db is bar diameter in mm
H is hole depth in mm
9
Concrete
Repair
Manufactured to restore and repair damaged
or substandard concrete by providing
structural and non-structural repairs, in
addition to sealing and bonding cracks
through injection.
Name
Description
Highlighted Uses
Approximate Yield
(Coverage)
4.1 Cementitious Repair Products
Cemfair FD
One component, polymer modified cementitious
fairing coat and cosmetic repair mortar applied
from feather edge to 3 mm thicknesses
Cemfair PF
One component, polymer modified cementitious
fairing coat and cosmetic repair mortar applied
from feather edge to 3 mm thicknesses with
excellent weathering properties and durability
Cemfair PF100
Crack filling, polymer modified cementitious fairing
coat and cosmetic repair mortar applied from
0.5-10 mm thicknesses
Cemfair 2C
Two component, crack filling, polymer modified
cementitious fairing coat and cosmetic repair
mortar applied from
0.5-10 mm thicknesses
Cempatch LS
One component, medium build, high strength,
fibre reinforced cementitious repair mortar applied
from 10 mm to 20 mm and 50 mm thicknesses for
overhead and vertical applications respectively
ideal for hot climate conditions
Cempatch S
One component, high build, high strength, fibre
reinforced cementitious repair mortar applied
from 10 mm to 50 mm and 75 mm thicknesses for
overhead and vertical applications respectively
10 DCP Product Summary
18 litres/25 kg bag
• For fairfaced concrete repair
• As a thin layer render
• As a skim coat for pin holes and minor honeycombed
concrete repair
• As a pore sealer and leveling mortar
• To produce a uniform surface for subsequent paint finish
0.7 litres/kg
19 litres/25 kg bag
• For crack filling
• For fairfaced concrete repair
• As a thin layer render
• As a skim coat for pin holes and minor honeycombed
concrete repair
• As a pore sealer and leveling mortar
• To produce a uniform surface for subsequent paint finish
12 litres/20 kg pack
16 – 17 litres/25 kg bag
• Repair of all types of structural concrete where high
strength and extremely low shrinkage properties are
required
• For the repair of vertical and overhead elements
• As a repair mortar for all structural elements in buildings,
water retaining structures, industrial plants, bridges, etc.
13.5 - 14 litres/ 25 kg bag
Concrete
Repair
Name
Cempatch MH
Cempatch SA
Cempatch FL
Cempatch FS
Setplug
Description
One component, high build, fibre reinforced
cementitious repair mortar applied from 10 mm to
50 mm and 75 mm thicknesses for overhead and
vertical applications respectively with very high
ultimate compressive, flexural and tensile strength
Spray applied, high build, high strength, fibre
reinforced cementitious repair mortar applied from
10 mm to 150 mm and 200 mm thicknesses for
overhead and vertical applications respectively
One component, shrinkage compensated,
self-compacting, fast setting and free flowing
microconcrete
Highlighted Uses
Approximate Yield
(Coverage)
13.5 – 14 litres/25 kg bag
• Repair of all types of structural concrete where high
strength and extremely low shrinkage properties are
required
• For the repair of vertical and overhead elements
• As a repair mortar for all structural elements in buildings,
water retaining structures, industrial plants, bridges, etc.
13.5 litres/25 kg bag
• Repair of all types of structural concrete elements such
as walls, columns, beams and floors
• Suitable for repair of steel congested areas
• Large volume concrete repairs
One component, self-compacting, fast setting,
pourable cementitious repair mortar with high
early and ultimate strength for heavy duty
trafficable horizontal surfaces such as runways
• For all types of concrete elements where fast
refurbishment is required for a quick return to service or
traffic
• Concrete pavements
• Car parks and garages
• Airport runways and aprons
Rapid set cementitious mortar for plugging of
water leaks in concrete structures
• Patching water leaks in concrete structures such as:
-- Tunnel lining
-- Sewage plants
-- Basements
-- Water tanks
-- Foundations
-- Concrete segments
FL standard:
12.5 litres/25 kg bag
FL 90:
12 litres/25 kg bag
FL100:
11.5 litres/25 kg bag
12.5 litres/25 kg bag
4.2 Epoxy Repair Products
Quickmast 341
Two component, solvent-free, high strength epoxy
adhesive and patching compound that can be
easily applied by hand or gun application
• Patching repair to defective concrete
• Bonding:
-- Concrete to concrete
-- Steel to concrete
-- Rubber to concrete
-- Natural stone (such as granite, limestone and marble) to
concrete
-- Natural stone (such as granite, limestone and marble)
to steel
• For gap filling and pin holes in concrete
• For bonding all types of tiles
• Works as a base coat for epoxy and polyurethane
coating
• For bonding Hydroseal FS (Waterproof jointing system)
0.67 litres/1 kg pack
11
Concrete
Repair
Name
Description
Highlighted Uses
Approximate Yield
(Coverage)
Three component, solvent-free, high build,
lightweight epoxy mortar for construction
and renovation work in vertical and overhead
applications
• Repair application areas such as:
-- In situ concrete columns
-- Soffits
-- Lintels
-- Gutters
-- Pre-cast units
9 litres/10 kg pack
Quickmast 201EJ
Three component, solvent-free, high strength
epoxy concrete which allows for easy placing and
compaction with negligible shrinkage designed
principally for use in construction and renovation
work
• Deep section repairs in columns, walls and heavily
loaded areas
• Infill mortar by ramming and packing techniques
beneath steelwork or beneath concrete beams in
underpinning work
• Sub-base for epoxy resin coatings and fine screeds
when a greater build is required together with a tighter,
smoother finish
10 litres/20 kg pack
Quickmast 350MLS
Three component, solvent-free, lightweight lining
and benching epoxy mortar with high chemical
and abrasion resistance
• Lining and benching manholes, sewage tanks, and all
similar structures which require impervious mortar or
lining to achieve maximum chemical resistance
8.4 – 9 litres/16 kg pack
Quickmast ETS
Three component, solvent-free, flexible epoxy
mortar
• For use as a transition strip between expansion joints
and bridge decks, asphalt, steel and concrete substrates
• Industrial floor joint filler for concrete construction and
control joints
10 litres/20 kg pack
Two component, low viscosity, high strength epoxy
resin system for crack injection applications in
concrete, masonry and brickwork
• Suitable for use in contact with potable water (BS 6920)
• Injection of cracks in all types of structural concrete
elements, masonry and brickwork
• Penetrating injection of cracks with widths from
0.2 - 10 mm
• Damp and dry conditions
4.54 litres/5 kg pack
Two component, low viscosity, moisture reactive
polyurethane foam resin for temporary water
stopping sealing of cracks
• Suitable for use in contact with potable water (BS 6920)
• Permanent and effective sealing of live cracks in wet
conditions when applied with Quickmast 120
• Injection of cracks in all types of structural concrete
elements, masonry, and brickwork
• Wet and damp conditions
4.46 litres/5 kg pack
Two component, low viscosity, elastic polyurethane
resin for permanent sealing of cracks in wet or dry
conditions
• Suitable for use in contact with potable water (BS 6920)
• Permanent and effective sealing of live cracks in wet
conditions when applied with Quickmast 110
• Injection of cracks in all types of structural concrete
elements, masonry, and brickwork
• Wet, damp and dry conditions
4.54 litres/5 kg pack
Quickmast 601HL
4.3 Injection Products
Quickmast 105
Quickmast 110
Quickmast 120
12 DCP Product Summary
Flooring
Systems
To enhance and protect new or existing
concrete floors. Ranges include screeds,
underlayments, coatings and toppings to
provide durability, longevity, performance and
decorative finishing.
Name
Description
Highlighted Uses
Standards
Coverage Rate
or Area Density
5.1 Dry Shake Hardeners
Emerishake
Emery based dry shake
monolithic concrete floor
hardener that provides
a non-oxidizing, dense
and smooth surface with
high abrasion and wear
resistance
• Heavy industry
• Parking areas
• Warehouses
• Workshops
• Service stations
• Aircraft hangars
• Loading bays
Monoshake
Dry shake quartz
monolithic concrete floor
hardener that provides
a non-metallic, nonoxidizing, dense and
smooth surface with
high abrasion and wear
resistance
• Parking areas
• Warehouses
• Workshops
• Service stations
• Aircraft hangars
Monotop
Dry shake monolithic
concrete floor hardener
for stamped concrete
that provides a metallic,
non-oxidizing, dense
and smooth surface with
high abrasion and wear
resistance
Monorelease
High quality coloured
hydrophobic powder
release agent for stamped
concrete
•
•
•
•
•
•
•
•
Parking areas
Driveways
Warehouses
Sidewalks
Walkways
Patios
Garden landscaping
Pool decks
EN 13813, Class CT-C70-F10-AR1
EN 13813, Class CT-C80-F7-AR1
EN 13813, Class CT-C35-F5-AR6
• Applied with a different colour than Monotop to
accentuate or emphasize the base colour for a
natural look
• Promotes the release of the stamping mats that
imprint the design in the concrete
3 - 7 kg/m²
Normal or medium
duty floors:
3 - 5 kg/m²
Heavy duty floors:
5 - 7 kg/m²
3 – 5 kg/m²
depending on colour
0.14 - 0.2 kg/m²
5.2 Cementitious Flooring Systems
Cemflow TS300
Trowel applied
cementitious screed
applied 10-15 mm for use
as a leveling mortar and
medium to heavy duty
base underlayment
• Floor leveling prior to tiling works and other floor
finishes
• Repair of breakage caused by mechanical and
electrical fittings installations or maintenance
• Repair of damaged floors or plaster
• Topping over heated flooring conduits
• Can be installed over hard wood, metal surfaces as
a base layer
EN 13813, Class CT-C35-F6-AR1
Cemflow GPU
Commercial grade, selfsmoothing underlayment
applied 1-10 mm by hand
or pump
• Topping with good wearing surface
• As an underlayment for many types of floor finishes
such as vinyl sheeting, carpeting, rubber sheet and
tiles
EN 13813, Class CT-C30-F4-AR0.5
1.3 m²/25 kg bag @
10 mm thickness
2.9 m2/25 kg @
5 mm thickness
13
Flooring
Systems
Name
Description
Highlighted Uses
Cemflow Base S
Industrial grade, selfsmoothing underlayment
and topping applied
5-50 mm by hand or pump
to provide a finished
sound floor
• For industrial areas such as:
-- Warehouses
-- Food processing plants
-- Industrial plants
-- Car parks
Cemflow Topping S
Industrial grade, selfsmoothing topping
applied 5-15 mm by hand
or pump for upgrading
and renovating new and
existing internal floors
• For industrial environments subjected to medium
to heavy traffic such as warehouses and food
processing plants
Standards
EN 13813, Class CT-C35-F5-AR0.5
Coverage Rate
or Area Density
1.36 m2/25 kg @
10 mm thickness
2.9 m2/25 kg @
5 mm thickness
5.3 Flooring System Sealers
Monoseal
Sethard S
High solids “look
enhancing” acrylic floor
and wall sealer and curing
compound that provides
dust proofing, resistance
to penetration of oils and
liquids and ease of clean
• Parking areas
• Driveways
• Garages
• Warehouses
• Industrial floors
• Sidewalks
• Walkways
• Patios
• Garden landscaping
• Pool decks
• Walls and columns
• Curing compound and sealer for freshly placed
concrete
Liquid surface hardener,
dust proofer and curing
aid for concrete surfaces
that provides non-staining,
non-toxic and good
penetration with improved
chemical and abrasion
resistance
• New concrete and cement based surfaces
• Renovation of old concrete and cement based
surfaces
• Deep sealing of pores
• Assists the curing process
• Reduces possibilities of:
-- Shrinkage
-- Hairline cracks
• Typical applications:
-- Factories
-- Warehouses
-- Garages
ASTM C309, Type I, Class B
ASTM C1315, Type II, Class B
Concrete:
8 -12 m²/litre
Stamped Concrete:
6 -10 m²/litre
Mixed (diluted)
1 part Sethard S with
3 parts clean water:
ASTM C309, Type I, Class A
ASTM C1315, Type I, Class B
10 m²/litre/coat for
1 coat application
7.5 m²/litre/coat for
2 coat application
5 m²/litre/coat for
3 coat application
5.4 Epoxy Flooring Systems
Strongcoat WD
Strongcoat EC10
High performance, water
based epoxy resin floor
and wall coating designed
to provide a hard, semimatt seal to concrete
floors, walls, ceiling and
other substrates
Hard wearing, solvent
based, anti-corrosive
epoxy resin coating,
designed to provide a
hard, semi-gloss coating
14 DCP Product Summary
• Soft drink and beverage production areas
• Industrial and commercial kitchen walls
• Warehouses
• Hospitals and pharmaceutical factory walls
• Fish and meat processing plant walls
• General food processing and manufacturing plants
• Light vehicular traffic areas
30 m²/5 kg pack/coat
to achieve
65 - 75 micron dry
film thickness
• Protective, decorative & hard wearing coating
for concrete floors, walls, ceilings, steel and other
substrates in areas such as:
-- Soft drink and beverage production areas
-- Dairies production areas
-- Showrooms
-- Industrial and commercial kitchen walls
-- Warehouses
-- Hospitals and pharmaceutical factory walls
-- Fish and meat processing plant walls
-- General food processing and manufacturing plants
-- Light vehicular traffic areas
30 m²/5 kg pack/coat
to achieve
70 - 80 micron dry
film thickness
BS 476-7, Class 1 spread of flame
Flooring
Systems
Name
Strongcoat EC50
Strongcoat HB
Description
Highlighted Uses
Standards
High build, hard wearing,
solvent based, anticorrosive epoxy resin
coating, designed to
provide a hard, semigloss
coating
High build, hard wearing,
solvent free, epoxy resin
coating, designed to
provide a hard, gloss
coating to concrete floors
Coverage Rate or
Area Density
2.9 m²/kg/coat
to achieve
150 micron dry
film thickness
• Protective, decorative, high chemical resistance
and hard wearing coating system for floors or walls
in many applications including:
-- Aircraft hangars
-- Car parks
-- Soft drink and beverage production areas
-- Dairies production areas
-- Showrooms
-- Production, maintenance and assembly areas
-- Warehouses
-- General food processing and manufacturing plants
Standard coverage:
Strongcoat Primer S:
5 m²/kg
Strongcoat HB
(base coat):
0.30 kg/m²
BS 476-7, Class 1 spread of
flame
Strongcoat HB
(top coat):
0.30 kg/m²
Refer to Technical Data
Sheet for Antislip coverage
details for:
Approximately 2 mm
thickness, medium texture
(Antislip Aggregate #2)
Approximately 1.25 mm
thickness, fine texture
(Antislip Aggregate #3)
Strongcoat SL1
(0.5 - 1.5 mm)
Strongcoat SL2
(1.5 - 3.5 mm)
EN 13813,
Class SR-B1.5-AR0.5-IR2.9
Solvent free, epoxy based
self-levelling topping that
provides floor surfaces
with a seamless, hygienic &
appealing finish
• Very durable topping for pedestrian & vehicular
traffic
•Resistant to many of the chemicals found in an
industrial environment
•Applied in areas such as:
--Aircraft hangars
--Hospitals
--Pharmaceutical factories
--Showrooms
--Laboratories
--Light industrial plants
--Kitchens
Strongcoat SL4
(4.0 - 6.0 mm)
Strongcoat Topping
(Above 5 mm)
EN 13813,
Class SR-B2.0-AR0.5-IR4.7
EN 13813,
Class SR-B2.0-AR0.5-IR8.3
Heavy duty, trowel applied
solvent free epoxy based
topping that provides floor
surfaces with a seamless,
hygienic & cosmetically
attractive finish, very
good slip resistance and
chemical resistance
• Can be coved and laid to falls
• Heavy industry factories
• Paint workshops
• Steel works
• Dairies
• Chemical factories
• Oil refineries
• Freezers and refrigerated storage
EN 13813,
Class SR-B2.0-AR0.5-IR10
Strongcoat Primer S:
5 m²/kg @
175 micron dry film
thickness
Strongcoat SL1:
10.6 m²/kit @
1 mm thickness
Strongcoat Primer S:
5 m²/kg @
175 micron dry film
thickness
Strongcoat SL2:
6.25 m²/kit @
2 mm thickness
Strongcoat Primer S:
5 m²/kg @
175 micron dry film
thickness
Strongcoat SL4:
3.75 m²/kit @
4 mm thickness
Strongcoat Primer S:
5 m²/kg @
175 micron dry film
thickness
3 m²/kit @
5 mm thickness
15
Flooring
Systems
Name
Strongcoat
Conductive
Strongcoat Primer
Strongcoat Primer S
Description
Flow-applied, 2 mm thick,
epoxy resin conductive
floor with resistance
between 5x10� and 1x106
ohms that comprises of a
primer, conductive base
and a top coat
Solvent free, high
performing epoxy resin
primer that improves the
adhesion of epoxy flooring
and coatings
Solvent based, high
performing epoxy resin
primer that improves the
adhesion of epoxy flooring
and coatings
Highlighted Uses
Standards
Surface resistance:
ASTM F150
5 x 104 to 1 x 10⁶ ohms
• Intended for static conductive flooring areas
such as:
-- Electronic manufacturing facilities
-- Hospital operation theatres
-- Hazardous dust and chemical environments
Bulk resistance:
DIN 51953
5 x 104 to 1 x 10⁶ ohms
US Federal Specifications
101C Method 4046:
Charge decay 5000v to
zero in less than 0.1 sec
Coverage Rate
or Area Density
Strongcoat Primer:
5 m²/kg
Strongcoat Conductive Basecoat:
4.5 m²/kg @ 2 mm thickness
Strongcoat Conductive Top Coat:
3.2 kg/m²
5 m²/kg @
200 micron dry
film thickness
• Improves the adhesion of subsequent epoxy
layers to walls & floors
5 m²/kg @
175 micron dry
film thickness
5.5 Polyurethane Flooring Systems & Vehicle Decking Systems
Gripdeck AJ System
Gripdeck Primecoat E:
0.25 – 0.30 kg/m²/coat
Wearcoat TG: 0.33 kg/m²/coat
Wearcoat Plus: 0.28 kg/m²/coat
Antislip Aggregates: 2-3 kg/m²
Ramps and turning circles:
Approx. 1.4-1.6 mm thickness
Traffic aisles and parking bays:
Approx. 0.9-1.1 mm thickness
Hard wearing, solvent
free, flexible polyurethane
coating system primarily
designed for use in car
parks with excellent
resistance to petrol,
battery acid, diesel, brake
fluid, de-icing salts, etc.
• Car park decks
• Car park ramps and turning circles
• Traffic aisles and parking bays
Gripdeck EW
System
Hard wearing, solvent free,
flexible waterproofing
polyurethane coating
system primarily designed
for use in car parks,
walkways, balconies, etc.
16 DCP Product Summary
Gripdeck Flexcoat
complies with ASTM
C957
Gripdeck Primecoat E:
0.25 – 0.30 kg/m²/coat
Gripdeck Primecoat PU:
0.30 – 0.40 kg/m²/coat
Gripdeck Flexcoat:
0.70 – 1.00 kg/m²/coat
Wearcoat TG:
0.33 kg/m²/coat
Wearcoat Plus:
0.28 kg/m²/coat
Antislip Aggregates:
2-3 kg/m²
Ramps and turning circles:
Approximately 2.4 mm thickness
Traffic aisles and parking bays:
Approximately 1.9 mm thickness
Flooring
Systems
Name
Griptop LDS
(1.0 - 3.0 mm)
Description
Highlighted Uses
Standards
Solvent free, flexible,
self-levelling polyurethane
floor topping that provides
floor surfaces with a
seamless, hygienic and
appealing gloss finish
• Durable and hard wearing surfaces for
applications such as:
-- Hospitals
-- Pharmaceutical factories
-- Showrooms
-- Laboratories
-- Light industrial plants
-- Kitchens
Heavy duty, trowel applied,
solvent free, modified
epoxy polyurethane floor
topping that provides floor
surfaces with a hygienic
and cosmetically attractive
finish with very good slip
and chemical resistance
• Durable and extremely hard wearing surfaces
for applications such as:
-- Heavy industry factories
-- Paint workshops
-- Steel works
-- Dairies
-- Chemical factories
-- Oil refineries
EN 13813,
SR-B2.0-AR 0.5-IR10
Hard wearing, solvent
based, modified
polyurethane flexible
coating designed to
provide a hard, semi-gloss
coating to concrete floors,
walls, ceiling and other
substrates
• Protective, decorative and hard wearing
coating for floors or walls in many applications
including:
-- Soft drink and beverage production areas
-- Dairies production areas
-- Showrooms
-- Industrial and commercial kitchen walls
-- Warehouses
-- Hospitals and pharmaceutical factory walls
-- Fish and meat processing plant walls
-- General food processing and manufacturing
plants
-- Light vehicular traffic areas
-- Normal metal surfaces
-- UV resistant; Colour change may occur
under direct sunlight without affecting the
performance
BS 476-7,
Class 1 Spread of Flame
Don Acid Etch
Concrete surface
preparation acid
etching liquid solution
incorporating corrosion
inhibitors
• Surface preparation solution for use on
concrete floors prior to sealing, epoxy coating
or painting
• Removes excess laitance from concrete floors
and walls which will undermine coating
adhesion
• Removal of hardened concrete from tools and
equipment
DCP Solvent
General purpose high
quality blend of industrial
cleaning solvents
• Non cured epoxies, polyurethane and polyester
• Wax and resin based curing compounds
• Solvent based acrylics and sealers
• Bitumen systems
• Industrial oil, wax and grease
Griptop MDS
(3.0 - 6.0 mm)
Griptop TF
Griptop Seal S100
Coverage Rate
or Area Density
10 m²/kit @ 1 mm thickness
EN 13813,
SR-B2.0-AR0.5-IR10
Griptop MDS Primer:
4-5 m²/kg
Griptop MDS:
3 m²/kit @ 4 mm thickness
Griptop TF:
2.6 m²/kit @ 5 mm thickness
Griptop TF Primer:
4.5 m²/kg/coat
Griptop TF Seal:
0.2 - 0.25 kg/m²/coat
40 m²/5 kg pack/coat to achieve
85 micron dry film thickness
5.6 Ancillary Products
2 - 3 m²/litre/coat
17
Protective
Coatings
Formulated to protect structures as the
first line of defence, for various structural
elements and substrates. To give protection
from weathering, chemical and mechanical
attacks and in some cases providing a
decorative finish.
Name
Description
Highlighted Uses
Recommended Coverage
or Spread Rate
6.1 Acrylic & Anti-Carbonation Coatings
Repcoat
One component, high build, water based,
micropourous acrylic elastomeric protective
anti-carbonation coating system with exceptional
weathering resistance
Repcoat S
One component, solvent based, high performance
aliphatic acrylate protective coating with excellent
hiding power, maximum protection against
chloride ingress and carbon dioxide diffusion
Repcoat FF
One component, water based, high performance
acrylic protective and decorative coating with a
matt finish, excellent long term weathering and
UV resistance
• Smooth decorative and protective coating
for concrete and other masonry surfaces in
applications such as:
-- Bridge abutments
-- External concrete surfaces of storage tank and
masonry surfaces
-- Multistory building and villas
-- Where a high external tough coating is required
-- Concrete cladding
Repcoat primer:
0.2 - 0.4 litres/m²
Repcoat:
0.5 litres/m²/coat to achieve 250 micron
dry film thickness
Repcoat S Primer:
0.2 litres/m²/coat
• Excellent protective and decorative fairfaced
coating can be used for many applications
including:
-- Retaining walls
-- Bridge abutments
-- External concrete of storage tanks
-- Multistory buildings and villas
-- Pre-cast elements and concrete cladding
-- Commercial and Industrial complexes
Repcoat S:
0.16 litres/m²/coat
0.18 - 0.22 litres/m²/coat to achieve
80 - 100 micron dry film thickness
6.2 Polyurethane Coating
Repcoat P
High performance, UV resistant polyurethane
based protective coating with semi-gloss finish on
steel and concrete surfaces
18 DCP Product Summary
• External protection on areas such as:
-- Steel tanks
-- Chemical processing areas
-- Concrete walls and floors
-- Protective UV coating over wide range of epoxy
systems
Repcoat P (Coloured):
0.11 - 0.18 litres/m²/ coat to achieve
50 – 100 micron dry film thickness
Repcoat P (Clear):
0.06 - 0.13 litres/m²/coat to achieve
30 – 70 micron dry film thickness
Repcoat P Primer:
0.125 - 0.2 litres/m²/coat to achieve
70 – 90 micron dry film thickness
Protective
Coatings
Name
Description
Highlighted Uses
Nontoxic, solvent free, high build epoxy protective
coating for concrete and metal with outstanding
chemical and mechanical properties
• Heavy duty protective coating for concrete and
steel
• Internal protective lining for potable water
concrete or steel tanks (BS 6920)
• Heavy duty wall and floor coating in food
processing plants, grain silos, dairies, hospitals
and pharmaceutical industries
• High chemical resistant protective coating
for power stations, oil refineries and sewage
treatment plants
High chemical resistant, solvent free epoxy
protective coating for concrete and metal
• Heavy duty protective coating for concrete and
steel
• Heavy duty wall and floor coating in food
processing plants, grain silos, dairies, hospitals
and pharmaceutical industries
• High chemical resistant protective coating
for power stations, oil refineries and sewage
treatment plants
Heat resistant, solvent free epoxy resin protective
coating for concrete and steel which can
withstand temperatures up to 130°C
• Resists boiling water and can be used in:
-- Water treatment plants
-- Desalination plants
-- Boiling water tanks and water stations
Recommended Coverage
or Spread Rate
6.3 Epoxy Coatings
Strongcoat 400
Strongcoat
CR402
Strongcoat
HR130
Strongcoat
EN100
Strongcoat PE1
Strongcoat PE4
Strongcoat
PE350
15 m²/5 kg pack/coat to achieve
400 micron dry film thickness
For smooth finish:
19 m²/pack/coat to achieve
200 micron dry film thickness
For antislip finish:
0.4 - 0.5 kg/m² depending on antislip
aggregate size
7 – 8 m2/5 kg pack/2 coats to achieve
400 micron dry film thickness
For smooth finish:
Strongcoat Primer S: 5 m2/kg
Strongcoat EN100:
5.8 – 5.9 m2/kg/2 coats
To achieve 680 micron dry film system
thickness
High performance, high chemical resistant,
seamless epoxy novolac lining with excellent wear
and chemical resistance properties
• Chemical plants
• Sewage treatment plants
• Pharmaceutical industry
• Petroleum refineries
• Storage areas
• Loading docks
• Food processing areas
Two component, high solids, polyamide coal tar
epoxy resin coating system with excellent water
and chemical resistance properties
• Waterproofing applications on concrete
substrates
• Lining of manholes, pipes, jetties, piers, ducting
and foundations waterproofing
• Sewage treatment plants
• Protection of concrete and steel structures
submerged in sea water or exposed to tidal or
splash zones
42 – 43 m2/18 kg pack/2 coats to achieve
400 micron dry film thickness
Two component solvent free coal tar epoxy resin
coating system with excellent water, chemical and
abrasion resistance properties
• Seawater tanks, channels and intakes
• Manhole linings
• Sewage and effluent plants
• Chemical processing areas
• Building foundations waterproofing
• Jetties, piers and docks
44 - 45 m²/14 kg/coat to achieve
200 micron dry film thickness
Two component, solvent based coal tar epoxy
resin coating system with excellent chemical
resistance properties
• Sewage treatment plants
• Protection of concrete and steel structures
submerged in sea water or exposed to tidal or
splash zones
• Lining of manholes, pipes, jetties, piers, ducting
and foundations waterproofing
40 - 41 m²/25 kg/2 coats to achieve
400 micron dry film thickness
For antislip finish:
Strongcoat Primer S: 5 m2/kg
Strongcoat EN100 (base coat):
2.90 – 2.95 m2/kg
Antislip aggregate #2: 0.35 – 0.75 kg/m2
Strongcoat EN100 (top coat):
1.90 – 1.95 m2/kg
To achieve 1500 micron dry film system
thickness
19
Protective
Coatings
Name
Strongcoat
EPU100
Strongcoat EPW
Description
Highlighted Uses
Recommended
Coverage Rate
High performance, flexible epoxy polyurethane
resin floor and wall protective coating with
excellent water and chemical resistance properties
• Wall and floor protective coating
• Protection system for car park decks
• Manhole and pipe lining
• Secondary containments
• Lining for sewage and effluent plants
• Lining of aeration and sludge tanks
• Sea water tanks, channels and intakes
• Foundation waterproofing
• Reservoirs, water treatment plants
50 m2/14 kg pack to achieve
200 micron dry film thickness
Solvent free, flexible, high build epoxy
polysulphide resin coating with outstanding
chemical and mechanical properties that is
available in two grades; (P) for use in contact with
potable water reservoirs (BS 6920) and (S) for use
in sewage treatment tanks, chemical plants, etc.
• Heavy duty protective and waterproof coating
for concrete and steel
• Strongcoat EPW-P is suitable for use with
potable water retaining structures and
reservoirs (BS 6920)
• Strongcoat EPW-S is suitable for use in
reservoirs containing sewage sludge, chemical,
oils and fuel
• Heavy duty wall and floor coating in food
processing plants, grain silos, dairies, and car
parks
24 m2/18 kg pack to achieve
500 micron dry film thickness
• Excellent water repellence for concrete, natural
and artificial stone walls and cementitious
products
• Helps protect substrates and acts as a moisture
barrier
• Injection into walls to prevent rising dampness
0.1 - 0.4 litres/m²
6.4 Water Repellent Coatings
Repelicone W
Ready for use, single component water based
water repellent protective coating for concrete,
stone and cementitious products
Repelicone L
Ready for use, single component
silane/siloxane based water repellent coating for
concrete, stone and cementitious products
Repelicone
LS300
High water and chloride intrusion resistance,
silane/siloxane based water repellent coating for
concrete, stone and cementitious products
20 DCP Product Summary
Sealants &
Joints
Designed to allow for movement in joints,
while protecting structures from chemicals
and weathering elements such as water, wind
and sunlight while preserving the overall
aesthetic design.
Name
Description
Highlighted Uses
Standards
7.1 Acrylic Sealants
Flexseal GA700
General purpose acrylic
sealant
Flexseal GA777
General purpose acrylic
sealant with mould
resistance
• Bonds to concrete, wood, anodised aluminum,
blockwork, marble and natural stone
• Sealing joints around windows and door frames,
cladding panels, galvanized metal sheets and
ducts
ASTM C834, Type OP, Grade NF
7.2 Silicone Sealants
Flexseal AS Series
Sanitary & universal acetoxy
cure silicone sealants
• Sanitary and wet room applications such as sealing
wall joints formed by ceramic tiles in bathrooms
and kitchens and perimeter joints around UPVC
frames
ASTM C920, Type S, Grade NS, Class 25, Use G, A, O & NT
BS EN ISO 11600 F25 LM
Flexseal NS Series
Neutral cure silicone sealants
• Industrial and commercial applications such
as glass wall assemblies, curtain walls, pre-cast
elements
• Ideal for non-porous substrates
7.3 Civil & Pavement Sealants
Flexseal PU425/440
One component, non-sag,
elastomeric polyurethane
sealant with high tear and
weather resistance
• Sealing of construction joints, water tanks,
irrigation channels, basement walls and pre-cast
concrete elements
• Bonds to concrete, wood, marble, aluminum, steel,
gypsum boards, etc.
ASTM C920, Type S, Grade NS, Class 25, Use NT, T, A
and M
DIN 18540-F
ISO 11600, Type F, 25 LM
U.S. Federal Specification TT-S-00230C, Type 2, Class A
Flexseal PF850
Pitch free, high performance,
cold applied, fuel resistant
pavement joint sealant
• Airport runways and aprons, car parks and traffic
decks, warehouses, oil terminals, docks and
harbours
BS 5212 Type FB (includes types N & F)
U.S. Federal Specification SS-S-200E
Flexseal PP800/F
Elastomeric, high
performance, cold applied,
fuel resistant pavement joint
sealant
• Sewage treatment plants, airport runways and
aprons, car parks and traffic decks, warehouses, oil
terminals, docks and harbours
• For horizontal joints only
BS 5212 Type FB (includes types N & F)
U.S. Federal Specification SS-S-200E, Type M in terms of
mixed viscosity and tack free time
Flexseal PS660
High performance
polysulphide civil sealant
that forms a flexible rubber
seal that bonds to all
common building materials
• Parapet wall joints
• Joints in metal and concrete sea walls
• Joints in water retaining structures
• Runway aprons and runways
• Road & tile joints
• Structural floor joints
Gun Grade:
ASTM C920, Type M, Class 25, Use NT, T, I & M
BS 4254, BS 6920, BS EN ISO 11600 F 25 LM
WRAS approved product: Listing number 9609512
Pouring Grade:
BS 5212 Type FB (includes types N & F)
21
Sealants &
Joints
Name
Description
Highlighted Uses
Standards
Flexseal PS900
Elastomeric, high polymer
content, cold applied,
polysulphide sealant with
resistance to fuel, sewage
water and oil
• Airport runways and aprons
• Water treatment and sewage treatment tanks
including sludge digestion, filtration and aeration
tanks
• Car parks and traffic decks
• Warehouses, oil terminals, docks and harbours
• Sea water retaining walls
BS 4254
US Federal Specification TT-S-00227E
Donseal 777
Elastomeric, high
performance, one
component, hot applied, fuel
and oil resistant pavement
joint sealant
• Al types of concrete pavement joints
• Airport runways and aprons
• Car parks and traffic decks
• Warehouses, oil terminals, docks and harbours
ASTM D3406, ASTM D3569
BS 2499, Type F1
US Federal Specifications:
SS-S-1614, SS-S-167b, SS-S-1401b, SS-S-1614
Don Hotrod
Heat resistant backing rods
for hot sealants
• Natural barrier onto which hot sealants can be
poured or extruded to make expansion joint in
applications such as runways, motorways, cargo
areas
• All concrete slab construction
Temperature stability: -40°C to +200°C
Cellrod
Closed cell polyethylene
foam backing rod that is
nonabsorbent and rot proof
• Provides a firm backing for the sealant to be tooled
• Bond breaker at the base of the joint thus:
-- Preventing three sided adhesion
-- Accompanying additional stress during joint
movement
ASTM C1330, Type C
Fibreboard
Compressible bitumen
impregnated wood fibre
sheets
• Expansion joints filler in concrete pavements, walls
and suspended slabs
• As a filler for joints in roads, runways and bridges
• Protection board for waterproof, coatings, and
membranes
• For structural isolation joints
DTp Specifications for Highway Works, Dec. 1991, Series
1000, Clause 1015 (pavement joints)
High density, compressible,
closed cell polyethylene joint
filler
• Potable water retaining structure
• Sewage treatment plants
• Sea walls
• Heavily trafficked floors
• Pedestrian areas
• Culverts and open canals
BS ISO 7214
DTp Specifications for Highway Works, Dec. 1991, Series
1000, Clause 1015 (pavement joints)
7.4 Joint Fillers, Covers & Accessories
Hydroboard
22 DCP Product Summary
Waterproofing
A very critical part of any construction
project, affecting durability and the protection
of structures from the access of unwanted
water. A wide comprehensive range of
products to cover all the different needs.
Name
Description
Highlighted Uses
Standard
Recommended
Coverage Rate
8.1 Bituminous Damp & Waterproofing
Bituproof 40S
Thin build, water based,
rubberised bitumen
protective coating for
substructure dampproofing, roof vapour barrier
and as a curing compound
Bituproof 50R
Medium build, water
based, rubberised bitumen
protective coatings for
substructure waterproofing,
roof vapour barrier and as a
curing compound
Bituproof
300F
High build, fibre reinforced,
water based, rubberised
bitumen protective coatings
for roof and substructure
waterproofing
Bituproof
320
High build, elastomeric,
water based, rubberised
bitumen protective coatings
for roof and substructure
waterproofing
• Underground concrete foundations
• Concrete and masonry block walls
• Walls below cladding systems
• Concrete slabs
• Basement walls
• As protective coating for normal and galvanized steel
plates
• Suitable for use as curing compound for fresh concrete
• Works as a primer for concrete, masonry surfaces,
before applying waterproofing bituminous membranes
• Retaining walls
• Shaded or tiled roofs
• Underground concrete foundations
• Wet floor areas such as bathrooms and kitchens
• Where minor live cracks may occur in concrete
substrates, Bituproof 320 will bridge such minor cracks
• Basement walls
• Concrete slabs
• Suitable for use as curing compound for fresh concrete
• As protective coating for normal and galvanized steel
plates
• Works as a primer for concrete, masonry surfaces,
before applying waterproofing bituminous membranes
ASTM D1227, Type II, Class 2
ASTM C309 when applied
with two coats at a rate of
2 m²/litre
3 - 5 m²/litre
ASTM D1227, Type II, Class 2
ASTM C309 when applied
with two coats at a rate of
2 m²/litre
ASTM D1227, Type II, Class 1
ASTM C309 when applied
with two coats at a rate of
2 m²/litre
ASTM D1227, Type III, Class 1
ASTM C309 when applied
with two coats at a rate of
2 m²/litre
As a protective
coating:
3 - 5 m²/litre/coat
As a waterproof
coating:
1 - 1.5 m²/litre/coat
8.2 Cementitious Waterproofing
Setseal C
Setseal 200C
Setseal B
Two component, flexible
acrylic cement modified
waterproof coating for
internal and external
applications available in
many attractive colours
One component, flexible
acrylic cement modified
waterproof coating for
internal and external
applications
Two component,
elastomeric acrylic cement
modified waterproof coating
for internal and external
applications
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 3 bars
• Water retaining structures and reservoirs
• Basements, roofs, and foundations
• Bathrooms and wet areas
• Protection of concrete substrates and masonry against
carbon dioxide, chloride ions, water and de-icing salts
• Non-toxic, suitable for drinking water
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 5 bars
Water Byelaws Scheme; WRc
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 7 bars
Negative: > 3 bars
11 m²/20 kg @
1 mm thickness
11.3 m²/15 kg @
1 mm thickness
12.5 m²/23 kg @
1 mm thickness
23
Waterproofing
Name
Setseal FLX
Setseal FLX
Plus
Setseal R
Description
Two component, enhanced
elastomeric acrylic cement
modified waterproof coating
for roofs and wet areas
Two component, high
quality elastomeric acrylic
cement modified waterproof
coating for roofs and wet
areas
One component
cementitious crystalline
capillary waterproofing
system for concrete
Highlighted Uses
• Water retaining structures and reservoirs
• Basements, roofs and foundations
• Bathrooms and wet areas
• Protection of concrete substrates and masonry against
carbon dioxide, chloride ions, water and de-icing salts
• Non-toxic, suitable for drinking water
• Potable water tanks
• Basements
• Bridge decks
• Tunnels
• Swimming pools
• Sewage tanks
• Retaining walls and foundations
• Underground parking
Standard
Recommended
Coverage Rate
BS 6920
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 12 bars
Negative: > 6 bars
9 m²/16 kg @
1 mm thickness
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 12 bars
Negative: > 6 bars
8.5 – 9 m²/15 kg @
1 mm thickness
BS 6920
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 8 bars
Negative: > 8 bars
After reaching the full activation
period
17-20 m²/25 kg @
1 mm thickness
8.3 Acrylic Waterproofing
Sealguard
Elastomeric, acrylic based,
waterproof coating for roofs
and walls available in many
colours
• Suitable for application on concrete, masonry, plaster,
etc.
• Sloped roofs and vertical walls
• Over existing terrazzo tiles
• Over corrugated iron sheets
• Over roof polyurethane foam
About 100% Elongation @ 2 mm
dry film thickness
1.5 - 2.0 m2/kg/coat
8.4 Waterstops
Hydrostop AB
Hydrostop
AW
Hyperseal DP
Hyperseal
DP-2010H
10 mm thick, self-supporting
PVC waterstops for
permanent protection
against leakage from cast-inplace concrete joints
Highly precise PVC
waterstops for permanent
protection against leakage
from cast-in-place concrete
joints
• Construction, contraction and expansion concrete
joints in:
-- Water reservoirs
-- Waste water treatment plants
-- Storage tanks
-- Dams
-- Swimming pools
-- Subways, tunnels and culverts
-- Canals, pumping stations and underground chambers
-- Foundations, basements and suspended slabs
BS 2571
BS 2782
U.S. Corps of Engineers
CRD-C 572-74
Available in different
sizes
High performance,
bentonite free, hydrophilic
swellable waterstop that
creates a positive seal
against the face of concrete
joints
• Installation in contraction and construction joints
primarily for:
-- Foundation walls slabs
-- Slabs-on-grade
-- Pre-cast wall panels
-- Manholes
-- Pipe connections
-- Box culverts
-- Utility and wet wells
-- Potable water tanks
Expansion volume rate: ≥ 300%
Available in different
sizes
High performance,
bentonite free, hydrophilic
swellable waterstop for
protection against sea water
• Positive seal against the face of the concrete joint and
prevents the saline water entry into the structure
• Applied against existing concrete and are simply
installed by nailing or using a hydrophilic adhesive
such as Hyperseal DPS-200
KS M 6518
Expansion volume rate GTE 350%
20 mm x 10 mm
24 DCP Product Summary
Waterproofing
Name
Hyperseal
DPS-200
Standard
Recommended
Coverage Rate
Description
Highlighted Uses
One component, elastic
water hydrophilic swellable
sealant and adhesive
for bonding swellable
waterstops
• Adhesive for bonding Hyperseal strips
• Problem-solving hydrophilic waterstop in difficult
access areas including:
-- Sealing around joints in pre-cast manhole covers cable
ducts and pipe, etc.
-- Sealing around pre-cast segments
-- Sealing between rough surfaces, e.g. slurry walls and
concrete slabs
-- Sealing around H-beams and other penetration
through concrete structures
-- Sealing around conventional rubber and plastic
waterstop to provide belt and braces seal prior to
concrete pour
Expansion volume: 100%
2.5 linear meters
when gunned to
form a constant
12 mm diameter
bead
Enhanced polyurethane
liquid membrane for
waterproofing and
protection
• Dry concrete, fibrous cement, mosaic cement roof tiles,
old (but well adhered) acrylic and asphalt coats, wood,
corroded metal, and galvanized steel
• Roofs
• Light roofing made of metal or fibrous cement
• Bathrooms
• Gypsum and cement boards
• Asphalt membranes
ASTM C836
1.2 - 1.6 kg/m²
to achieve
1 mm dry film
thickness
High quality polyurethane
liquid membrane for
waterproofing and
protection
• Dry concrete, fibrous cement, mosaic cement roof tiles,
old (but well adhered) acrylic and asphalt coats, wood,
corroded metal, and galvanized steel
• Roofs
• Bridges platforms
• Irrigation channels
• Light roofing made of metal or fibrous cement
• Verandas and balconies
• Bathrooms
• Gypsum and cement boards
• Asphalt membranes
• EPDM membranes
• Polyurethane insulation foams
ASTM C836
1.2 - 1.6 kg/m²
to achieve
1 mm dry film
thickness
• Used in conjunction with Quickmast 341/C to seal joints
and cracks having large movement capability
• Seal construction joints, expansion/contraction joints
and cracks even in damp conditions
• Seal joints and cracks in water retaining structures
and especially in places subjected to chemical
contamination
Elongation at Break: ≥ 500%
Available in different
sizes
ASTM E154-88, Section 10:
(resistance to puncture)
600 N for 3 mm
700 N for 4 mm
1000 N for 5 mm
Available in
3, 4 and 5 mm
thicknesses
ASTM D6506, Type 2 & 3, Class B
Sheets sizes:
1 x 2 m (3.2 and
4 mm).
0.90 x 2 m (6 mm)
8.5 Polyurethane Waterproofing
Aquathane
R200
Aquathane
R100
8.6 Waterproofing Membranes
Hydroseal FS
Highly elastic, hydrophobic
and chemically resistant
TPO (Thermoplastic
Polyolefin) Waterproof
jointing system
8.7 Ancillary Products & Accessories
Plasti-board
Proto-board
Semi-flexible,
polypropylene based
waterproofing protection
board with high puncture
resistance
Multi-layer bitumen
impregnated thermally
bonded protection board
• Used as permanent protection for all types of
waterproofing and damp-proofing
25
Adhesives
Designed for a variety of applications.
Such as bonding agents for new to old
concrete, primer for different applications
including concrete repair and general
purpose adhesives.
Name
Description
Highlighted Uses
Highly stable PVA, multi-purpose bonding
agent, primer, sealer and admixture for
cement or gypsum mixes for dry internal
applications
• Used as a:
-- Primer for porous substrates and paints
-- Sealer coat
-- Dust proofing
-- General bonding agent
-- Cement based admixture
• Areas of application are:
-- Concrete, cement based and gypsum
substrates
-- Dry internal applications
• Chloride free
Standards
Recommended
Coverage Rate
9.1 Polymer Adhesives
Keybond 2000
Cempatch SBR100
Good quality liquid styrene butadiene
rubber (SBR) latex, multi-purpose bonding
agent, primer, sealer and admixture for
cement or gypsum mixes
Cempatch SBR250
Very good quality liquid styrene butadiene
rubber (SBR) latex, multi-purpose bonding
agent, primer, sealer and admixture for
cement or gypsum mixes
Cempatch SBR400
Improved quality liquid styrene butadiene
rubber (SBR) latex, multi-purpose bonding
agent, primer, sealer and admixture for
cement or gypsum mixes
Cempatch AB
Acrylic bonding and curing agent for
cement mixes and concrete repair
26 DCP Product Summary
Bonding agent:
6 m² when diluted 1:1
Sealer coat:
25 m² when diluted 1:4
Admixture:
20 - 25 litre/100 kg of
cement depending on
use
• Used as a:
-- Primer for porous substrates
-- Sealer coat
-- Dust proofing
-- General bonding agent
-- Waterproofing enhancer
-- Cement based admixture
• Areas of application are:
-- Concrete, cement based and gypsum
substrates
-- PVC & rubber substrates
-- Submerged, external and internal
applications
• Special advantages include:
-- Water and water vapour resistance
-- Freeze/thaw stable
-- Chloride free
• Primer and curing aid for Cempatch
cementitious repair systems
• Bonding aid for bonding fresh to old
concrete
• Internal, external or submerged
conditions
Dosage is dependent on
required usage
ASTM C1042
ASTM C1059, Type I & II
As a primer:
5 – 8 m²/litre
As a curing aid:
4 – 6 m²/litre
Adhesives
Name
Description
Highlighted Uses
Standards
Recommended
Coverage Rate
9.2 Epoxy Adhesives
Quickmast 108
Two component, multi-purpose, moisture
tolerant, non-sag, solvent free epoxy resin
adhesive
• Bonding fresh wet
concrete/cementitious material to old
concrete/cementitious surfaces
• Damp and dry conditions
• External and internal applications
ASTM C881 Type 1,2,5,
Grade 2, Class C
3.0 – 3.5 m²/kg
(3.6 litres/5 kg pack)
Quickmast SB
Fast set, high strength, medium viscosity,
solvent free, two part epoxy adhesive that
bonds to asphalt and concrete surfaces
• Fixing traffic markers and road studs
• Filling gaps, holes and surface
irregularities
• Bonding of steel elements, natural
stone and polyethylene elements
AASHTO T237-73,
Type 2, slant shear, bond
strength and gel time
15 – 30 ml/stud
Multi-purpose, two component, medium
viscosity, solvent free epoxy resin adhesive
for high strength bonding
• Concrete and metals
• Glass
• Plastics
• Timber joints and ceramics
• Fixing laminates/veneers
• Rubber
• Submerged conditions
Quickmast EP100
BS 6319-2
(compressive):
≥ 65 MPa
BS 6319-3 (flexural):
≥ 15 MPa
0.9 – 1.0 m²/0.5 kg @
0.5 mm thickness
BS 6319-7 (tensile):
≥ 8 MPa
9.3 Steel Reinforcement Protection
Cempatch Primer M
Repcoat ZR
Cementitious bonding slurry and steel
reinforcement primer with corrosion
protection
• Corrosion protection for:
-- Steel reinforcement in concrete repair
-- As a bonding slurry between DCP
cementitious systems and concrete
substrates
One component, epoxy based zinc rich
primer for steel with corrosion protection
• Provide active anti-corrosion coating
for all forms of steel:
-- Reinforcement
-- Re-bars
-- Structure
-- Tanks
-- Pipelines
-- Plant components, etc.
BS 6319-3 (flexural):
≥ 6 MPa
BS 6319-7 (tensile):
≥ 2.5 MPa
6 m²/8 kg bag @
1 mm thickness
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 5 bars
6 m²/litre/coat to
achieve 50 micron dry
film thickness
27
Tile Adhesive &
Grouts
Never to be neglected by clients, designers,
or contractors as this group of products
provides the base, support and aesthetics
of the installation for all types of tiles and
natural stones.
Name
Description
Highlighted Uses
Standards
10.1 Ceramic Tile & Stone Adhesives
Cemfix GP
• For wall and floor applications
• Suitable for exterior and interior applications
• Can be used in wet areas such as bathrooms and kitchens
• Can be used with under floor heating systems
• On concrete, cement based mortar, screed and plaster
• On drywall such as gypsum boards and fiber cement boards
ANSI A118.1
BS EN 12004, C1T
ISO 13007-1, C1T
High performance, deformable
cementitious tile adhesive for
submerged conditions with high slip
resistance and extended open time
• For permanent fixing of all types of ceramic, porcelain and other non-porous
tiles on submerged condition such as swimming pools, fountains and potable
water tanks
• Highly recommended for bathrooms, kitchens and other wet areas
• Excellent for exterior applications
• Suitable with underfloor heating systems
• Suitable for fixing large format tiles
• On concrete and cement based mortar, screed and plaster
• On drywall such as gypsum boards and plaster boards
ANSI A118.4
BS EN 12004, C2TES1
ISO 13007-1, C2TES1
Single component, highly deformable
ceramic tile and stone adhesive with
slip resistance and extended open
time
• Laying large format or heavy tiles and natural stone over concrete and cement
base screed, mortar and plaster substrates
• Laying all types of ceramic tiles and stone on all common construction
substrates where slightly movements or deflections are likely
• Highly recommended with underfloor heating systems
• Superb in fixing tiles in external floors and walls exposed to sever
environmental conditions
• Recommended for bathrooms, kitchens and other wet areas
• Can be used for tile over tile applications
• On drywall such as gypsum boards and plaster boards
ANSI A118.4
BS EN 12004, C2TES2
ISO 13007-1, C2TES2
Two component, high performance
tile adhesive for heavy duty areas with
slip resistance and extended open
time
• Laying large format tile and natural stone over concrete and cement base
screed, mortar and plaster substrates
• For tile over tile applications
• For permanent fixing of all types of ceramic, porcelain and other non-pours
tiles on submerged condition such as swimming pools and fountains
• Highly recommended for bathrooms, kitchens and other wet areas
• Excellent for external application such as terraces and balconies
• Excellent for underfloor heating systems
• Non-sag, can be used for vertical walls
• On drywall such as gypsum boards and plaster boards
ANSI A118.4
BS EN 12004, C2TE
ISO 13007-1, C2TE
• Grouting all types of ceramic tiles and natural stones up to 6 mm joints
• Suitable for commercial and residential buildings
• Suitable for bathrooms, kitchens and other wet areas
• Non-sag, excellent for wall applications
• Excellent for internal and external applications
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
General purpose, cementitious tile
adhesive with high slip resistance for
internal and external use
10.2 Performance Tiling Adhesives
Cemfix W
Cemfix Flex
Cemfix 2CS
10.3 Ceramic Tile & Stone Grouts
Cemafill GP
General purpose cementitious
ceramic tile grout with high abrasion
resistance for joints up to 6 mm
28 DCP Product Summary
Tile Adhesive &
Grouts
Name
Cemafill Stone
Cemafill M
Description
Highlighted Uses
Standards
High performance cementitious tile
grout and stone pointing mortar for
joints up to 20 mm
• Specially designed for bricks and stone pointing for joints up to 20 mm
• Suitable for commercial and residential buildings
• Suitable for bathrooms, kitchens and other wet areas
• Non-sag, excellent for wall applications
• Excellent for internal and external applications
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
High performance, non-sanded
cementitious tile grout for joints up
to 3 mm
• Specially designed for fine grouting of joints up to 3 mm
• Excellent performance in high traffic areas such as shopping centres, hospitals
and universities
• Superb performance in wet areas and submerged conditions such as
swimming pools and fountains
• Non-sag, suitable for wall applications
• Excellent for external and internal applications
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
High performance and water repellant
cementitious tile grout for joints up to
8 mm in wet and submerged areas
• Grouting all types of ceramic tiles and natural stone up to 8 mm joints
• Superb performance in wet areas and submerged conditions
• Suitable for commercial and residential buildings
• Non-sag, excellent for wall applications
• Excellent for internal and external applications
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
Two component, high performance
cementitious tile grout with high
abrasion resistance characteristics for
joint widths up to 8 mm
• Grouting all types of ceramic tiles and natural stone up to 8 mm joints
• Ideally suitable for grouting high traffic areas such as shopping centres,
hospitals and universities
• Suitable for bathrooms, kitchens and other wet areas
• Non-sag, excellent for wall applications
• Excellent for internal and external applications
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
10.4 Performance Tiling Grouts
Cemafill W
Cemafill 2CS
10.5 Epoxy Adhesives & Grouts
Quickmast
EP200WD
Quickmast
EP200
Quickmast
EP500
Flexible fast setting three component
performance water based epoxy
ceramic tile and stone adhesive
and grout with abrasion and slip
resistance, mould, stain and water
impermeability
Highly flexible fast setting three
component performance solvent free
epoxy ceramic tile and stone adhesive
and grout with chemical, abrasion and
slip resistance, mould, stain and water
impermeability
Highly flexible fast setting three
component performance solvent free
epoxy ceramic tile and stone adhesive
and grout with chemical, abrasion and
slip resistance, mould, stain and water
impermeability that may be applied
on humid substrates
• Commercial centres
• Recreation centres
• Other high traffic areas
• Swimming pools
• Kitchens
• Applied on both concrete & steel substrates
• Swimming pools
• Laboratories
• Kitchens
• Dairy industries
• Meet poultry and food processing plants
• Hospitals
• Abattoirs
• Pharmaceutical plants
BS EN 12004, R2T
ISO 13007-1, R2T
ANSI A118.3
BS EN 12004, R2T
ISO 13007-1, R2T
29
Building Finishing
Products
Produced to serve the residential and
commercial construction industry, with
easy to apply, cost effective and attractive
products such as putties, plasters, and
decorative coatings to provide protective and
aesthetic finishing.
Name
Description
Highlighted Uses
Recommended
Coverage Rate
11.1 Block Mortars
Cemfix BB
Block and brick laying cementitious
mortar with water resistance
• For permanent fixing of all types of blocks and bricks
• Can be used internally and externally
• Non sag, can be used for vertical and horizontal surfaces
15 litres/25 kg bag
Cemfix AAC
Lightweight block thin laying
cementitious mortar with water
resistance
• For permanent fixing of all types of lightweight blocks
• Can be used internally and externally
• Non sag, can be used for vertical and horizontal surfaces
4 m²/20 kg bag for
10 x 20 cm blocks @
3 mm thickness
5 m2/25 kg bag @
3 mm thickness
11.2 Levelling Coat for Plasters
Proplast RC100
Cementitious key coat plaster to
enhance the bond between Proplast
range of plasters and all common
types of substrates
• Key bonding agent between plaster and smooth substrates including:
-- blocks (normal and lightweight)
-- fairfaced concrete
-- concrete with microsilica
Proplast
Contact Primer
Polymer modified resin based
contact primer to enhance the bond
between Proplast range of plasters
(mainly Gypsum based) and concrete
substrates
• Ideal designed primer coat to increase the bonding on smooth concrete
substrates for gypsum, lime and cement plasters
• Used internally, externally and for vertical and overhead applications
• Ideal primer for Gypsum based plasters
Proplast CM100
Cementitious levelling plaster with
improved bond strength, high impact
and condensate resistance
• Plastering of concrete and blocks surfaces internally and externally
• Applied by trowel or spray plastering machine
40 m2/ton @
15 mm thickness
Proplast GB1100
Gypsum levelling plaster with mould
and condensate resistance ready for
final top coat or paint
• Plastering of concrete and brick surfaces internally
• Applied by trowel or spray plastering machine
2.2 m²/25 kg bag @
10 mm thickness
30 DCP Product Summary
Undiluted:
3.0 - 3.5 m2/kg
Diluted:
(2 water:3 primer)
3.5 - 4.0 m2/kg
Building Finishing
Products
Name
Description
Highlighted Uses
Coverage
11.3 External Wall Insulating Plasters
Thermofix GP
Cementitious adhesive base coat
plaster for external wall insulating
systems with improved bond strength
Thermofix PRO
Flexible cementitious adhesive base
coat and protective top coat plaster
for external wall insulating systems
with improved bond strength, impact
and water resistance
Thermofix Flex
Highly flexible cementitious adhesive
base coat and protective top coat
plaster for external wall insulating
systems with improved bond strength,
impact and water resistance
• For permanent fixing of:
-- Expanded polystyrene boards
-- Extruded polystyrene boards
-- Mineral wool boards
• For permanent fixing to walls and roofs of:
-- Expanded polystyrene boards
-- Extruded polystyrene boards
-- Mineral wool boards
• Provides a strong and smooth layer over thermal insulation boards
• Used with reinforcing mesh to form a solid layer to protect insulation boards
• Suitable to receive a wide range of decorative finishes
6 m²/25 kg bag @
3 mm thickness
As an adhesive:
6 m²/25 kg bags @
3 mm thickness
As protective layer:
3.75 m²/25 kg bag @
5 mm thickness
11.4 Smooth Finishing & Filling Plasters
Probuild JC100
Probuild PB200/
Exterior
Thin coat gypsum smooth finishing
and joint compound putty plaster for
all common types of substrates
• Used internally to fill joints between adjacent gypsum and plaster boards in
conjunction with an appropriate mesh
• Used for covering corner beads, fasteners, trims and other small openings
• Skim coating for the entire gypsum and plaster panel surface
13 -13.5 m2/20 kg bag
@ 1 mm thickness
Thin coat cementitious smooth
finishing and small filling putty plaster
with mould and water resistance for
all common types of substrates
• When applied, it results in a smooth surface that can be easily hand sanded
• Available in:
-- Interior grade thin coat plastering of concrete ceilings and block surfaces
-- Exterior grade thin coat plastering of concrete and block surfaces
22 m2/25 kg bag @
1 mm thickness
• Primer coat to increase the bonding on smooth concrete substrates for DCP full
range of decorative plasters
• Used internally, externally and for vertical and overhead applications
5.0 - 8.0 m2/litre
• Wall coverings external and internal
• Decorative textured finishes comes in two different systems:
-- T type: normal textured uniform system
-- S type: scratch type finish
• As a decorative component of the ETICS/EIFS systems
• Complies with ETAG 004
Coverage is dependent
on selected texture
and grade
11.5 Decorative Plasters
Proplast
Universal Primer
Polymer modified, resin based primer
to enhance the bond between
Proplast range of plasters and surface
decorative finishes on different kind of
substrates
Proplast Acrylic
Ready to use, acrylic based decorative
finish coat with weather resistance
and vapour permeability
Proplast Silicate
Ready to use, silicate based decorative
finish coat with weather resistance
and vapour permeability
Proplast Silicone
Ready to use, silicone based
decorative finish coat with weather
resistance and vapour permeability
31
Structural
Strengthening
Very specialised products and systems
for use in the area in civil engineering that
deals with changing structural elements
loading capacities to accommodate changing
requirements or elements deterioration or
insufficient capacities.
Name
Profibre CP
Description
Highlighted Uses
Heavy duty carbon fibre reinforced polymer plate structural strengthening system
Profibre CW
Heavy duty carbon fibre reinforced polymer wrap structural strengthening system
Profibre GFW
High strength woven glass fabric for structural strengthening
32 DCP Product Summary
• Structure use change (load variations)
• Design or construction defects
• Standards and specifications regulatory change
• Increasing loading capacity
• Satisfying structure utilization requirements
• Structural repairs
• Protecting structures against natural disasters
Don Construction Products
www.dcp-int.com
DON CONSTRUCTION PRODUCTS W.L.L.
DOHA, QATAR
T: +974 4 411 4004
F: +974 4 411 4014
E: [email protected]
DCP SAUDI CO. - CENTRAL & EASTERN REGIONAL OFFICE
RIYADH, SAUDI ARABIA
T: +966 11 461 2003
F: +966 11 279 2059
E: [email protected]
DCP SAUDI CO. - MAIN & WESTERN REGIONAL OFFICE
JEDDAH, SAUDI ARABIA
T: +966 12 234 4221 Ext. 102
F: +966 12 234 4282
E: [email protected]
AYLA FOR BUILDING MATERIALS INDUSTRY & TRADE
BAGHDAD, IRAQ
T: +964 790 148 8730
M: +964 770 019 5748
M: +964 790 141 6514
E: [email protected]
AYLA FOR BUILDING MATERIALS INDUSTRY & TRADE
BASRA, IRAQ
T: +964 790 251 6909
M: +964 770 793 7631
E: [email protected]
AYLA FOR BUILDING MATERIALS INDUSTRY & TRADE
ERBIL, IRAQ
T: +964 750 422 2082
E: [email protected]
SULAIMANIYAH AGENT - LIBRO CO.
SULAIMANIYAH, IRAQ
T: +964 770 154 6704
E: [email protected]
AYLA CONSTRUCTION CHEMICALS
AMMAN, JORDAN
T: +962 6 533 8891
F: +962 6 533 8829
M: +962 79 666 5332 (Office)
M: +962 79 566 7311 (Showroom)
E: [email protected]
276 Khalda St., Al-Darraas Building (Showroom)
WEST BANK AGENT UNIVERSAL FOR MODERN CONSTRUCTION
RAMALLAH, PALESTINE
T: +970 2 290 4617
F: +970 2 295 0234
M: + 970 59 967 5600
E: [email protected]
AYLA LEBANON
BEIRUT, LEBANON
T: +961 1 444 562
F: +961 1 444 563
E: [email protected]
LIBYA AGENT - AL RADWAH CONSTRUCTION CHEMICALS
TRIPOLI, LIBYA
M: +218 91 354 1187
E: [email protected]
ALL OTHER MENA COUNTRIES
E: [email protected]