One Hot Car, Three Exciting Horsepower Options!

One Hot Car, Three Exciting Horsepower Options!
®®
2010
®
from
Creating a New Generation of Classics!
Camaro®, arguably one of the most legendary names in the history of late-model Chevrolet Muscle Cars, is once again the basis for
three limited-edition, normally-aspirated Specialty Vehicles from SLP; the SS-based ZL454* and ZL427*, and the RS-based ZL327*
Camaro!
Produced by SLP Performance Parts, Inc. (SLP), and only available through Chevrolet dealerships nationwide, these ZL® Camaros
offer the all-around performance, handling, and head-turning styling true to their distinctive nameplates – in a way that only SLP
can provide.
Following in the footsteps of the 40,000+ fourth
2
generation Camaro SS® specialty vehicles SLP
produced for GM and its dealers is a daunting
challenge. But one test drive will convince skeptics
that these three new ZL Camaro specialty vehicles
have recaptured and refined the special magic the
SLP name offers.
The 2010 ZL Camaros from SLP are destined to become legendary Camaro classics!
* The ZL454 is based off the V8 LS3 426 HP engine with the 6-speed manual transmission. The ZL427 is based off the V8 L99 400 HP engine with 6
speed automatic transmission. The ZL327 is based off the direct-injection V6 304 HP engine with manual or automatic transmission.
Camaro, SS, and RS are registered trademarks of General Motors Corporation
3
BEST-IN-CLASS PERFORMANCE
POWERFLO® AXLE-BACK EXHAUST SYSTEM
SLP’s Axle-Back Exhaust System was designed and tuned specifically
for the new ZL327/427/454 Camaros. The resulting tone is deep,
rich and powerful - a perfect blend of Muscle Car and GrandTouring sound quality.
The system features polished 304 stainless steel mufflers, mandrelbent stainless steel pipes, and 4” diameter dual-wall exhaust tips
4
5
that fit the factory rear fascia openings.
Note: SLP also offers this exhaust system with tips that fit the rectangular
shaped rear exhaust outlets that are included with the dealer installed GM
ground effects package.
Blackwing® Cold-Air Induction System
25% Underdrive pulley/harmonic balancer
SLP’s unique Underdrive Pulley/Harmonic Balancer for the ZL427and ZL454
Camaros only, reduces engine accessory (water pump, alternator and A/C compressor) drive speed by 25%, contributing to the engine’s increased horsepower
output. It features steel construction and incorporates a pair of extra-tall belt
retention walls that eliminate any possibility of belt slippage.
SLP pioneered this power-enhancing technology many years ago on the fourth
generation F-car-based Camaro. This technology is now incorporated in our new
2010 V6 and V8 ZL Camaros.
The Blackwing Cold-Air Induction System replaces the
restrictive, power robbing factory air filter and intake
tube assembly providing a noticeable power gain.
The system includes an OEM-quality black-finished
polypropylene high-flow intake tube with a raised SLP
Blackwing logo and a high-flow, reusable Blackwing filter.
Custom-tuned pcm program
Every one of SLP’s ZL327/427/454 Camaro
Specialty Vehicles includes a non-adjustable,
Performance-Optimized PCM Custom Tune
which is pre-installed using our hand-held
programmer (included). All of SLP’s Custom
tunes are dynamometer-developed to
provide maximum horsepower and torque
increases, while maintaining the Camaro’s
excellent driveability. 6
7
WORLD CLASS HANDLING
OPTIONAL Adjustable sway bar package
OPTIONAL SPORT SUSPENSION SPRING PACKAGE
SLP’s optional, Performance Front and Rear Sway Bar Package with adjustable links provides an easy-to-install, cost-effective upgrade
SLP’s optional Sport Suspension Spring Package is specifically engineered and tuned for the new V6 and V8 ZL
Camaros. By lowering the chassis 1.0” in the front and rear, it gives the 2010 ZL327/427/454 Camaros a more
aggressive stance, lower center of gravity and delivers even more response and control during high speed cornering. These German engineered, progressive rate springs are made to the same rigorous performance and quality
standards as the springs used for NASCAR, Formula 1, Indy Car and the World Rally Championship.
that will significantly improve traction and the overall handling characteristics of the ZL550 and ZL575 Camaros.
These tubular bars are both 29mm in diameter compared to the 23mm solid front and rear factory bars.
The front bar has two positions of adjustability, while the rear bar has three adjustments.
When combined with our optional Sport Suspension
Spring Package, this Sway Bar Package provides
world class handling.
RIDE HEIGHT WITH SLP’S SPORT SUSPENSION PACKAGE
STOCK RIDE HEIGHT
HEAD-TURNING STYLING
All of SLP’s exterior styling features help reinforce the SuperCar image of our ZL327//427/454 2010 Camaros.
From the functional hood scoop, to the aggressive rear spoiler and uniquely styled 20” wheels, this car makes a
powerful performance statement, ensuring its place with the new generation of Camaro classics.
functional REAR SPOILER
SLP’s OE-quality composite Rear Spoiler is a taller, more aggressive design, while still maintaining many of the design features of the
stock spoiler. It provides increased down-force at higher speeds to improve vehicle stability. (Design patent pending).
Optional performance HOOD WITH FUNCTIONAL SCOOP
SLP’s optional RTM Hood with Functional Heat Extractor Scoop (design patent pending) provides a more aggressive performance
image. It features OE-quality RTM composite material, is the same weight as the stock hood and includes many of the factory hood
design features including crush initiators and attaching hardware. The functional scoop allows cold, fresh air to enter the engine compartment, forcing hot, under-hood air out. It includes an injection molded grille for the hood scoop opening and an injection molded
close-out panel insert for the non-functional opening in the front fascia (SS models only).
8
REAR 1/4 PANEL GILL INSERTS
These gill insert graphics fade from clear to solid gloss black, giving the ZL Camaro’s rear 1/4 panels the appearance of functional
vents. Similar to the early Camaro gill accents, they also were part of the early Camaro’s heritage.
20” Five Spoke red line WHEELS
SLP’s OE-quality aluminum alloy wheels feature a powder-coated red line at the outer edge of the rim, reminiscent of the early
Camaro’s Red Line tires. These light-weight 20” x 8” front and 20” x 9” rear wheels provide the same offset and width as the factory
wheels. The wheels are painted metallic gray with a machined spoke face and include ZL center caps. (Wheel design patent pending).
9
OPTIONAL RALLY STRIPES* OR HOCKEY STICK STRIPE GRAPHICS
SLP’s ZL® Camaros can be ordered with either one of
these traditional muscle car stripe themes. The Rally
Stripes are painted on and clear-coated,
using the same paint and clear finish that the
factory supplies, providing a lasting finish
that won’t fade. The Hockey Stick Stripes
are OE-quality vinyl graphics.
Both optional stripe themes are available
in Black, White, Silver and Hugger Orange,
all with a non-metallic, high-gloss finish.
Any of the available stripe colors can be
ordered in combination with any factory
Camaro exterior color.
BLACK RALLY STRIPES
ON RALLY YELLOW
WHITE RALLY STRIPES
ON BLACK
BLACK RALLY STRIPES
ON VICTORY RED
SILVER RALLY STRIPES
ON IMPERIAL BLUE
METALLIC
HUGGER ORANGE RALLY STRIPES
ON SUMMIT WHITE
*Rally Stripes are only available with SLP’s optional Performance Hood.
10
11
WHITE RALLY STRIPES ON INFERNO ORANGE METALLIC
BLACK HOCKEY STICK STRIPES ON RALLY YELLOW
WHITE HOCKEY STICK STRIPES ON RED JEWEL TINTCOAT
BLACK HOCKEY STICK STRIPES ON SILVER ICE METALLIC
HUGGER ORANGE HOCKEY STICK STRIPES
ON SUMMIT WHITE
SILVER HOCKEY STICK STRIPES ON CYBER GRAY METALLIC
SILVER HOCKEY STICK STRIPES ON AQUA BLUE METALLIC
REAR BLACK-OUT PANEL
This OE-quality graphic is available in a
gloss black finish. This feature was part of
the early Camaro heritage, signifying that
the car had the larger engine option.
OPTIONAL HERITAGE-STYLE
SS® or RS® BADGES
Continuing the heritage theme on the ZL Camaros,
SLP provides the same style of lettering found on
earlier generation Camaros. These badges are
GM official licensed products. RS badges are only
available with the ZL327 V6 package.
EXTERIOR ZL BADGES
key fobs and dash plaque
These injection molded, dimensional badges
feature a chrome face with raised red ZL
letters and white numbers, similar to the
early Camaro badges. Each ZL Camaro
includes three badges; two for the front
fenders and one for the rear decklid.
Each ZL Camaro includes two cloisonné
ZL327/427/454 key fobs and one dash
plaque.
Front floor mats
Every ZL Camaro comes with a set of
premium quality front floor mats with
the ZL327/427/454 logo embroidered
on both mats.
12
13
car cover
To protect the finish of your ZL Camaro,
each vehicle includes a silver fabric
ZL327/427/454 logo silkscreened car
cover that reflects the sunlight and helps
protect it from the elements and against
harmful UV rays. Each cover includes a
locking cable and a tote bag.
OPTIONAL FRONT GRILLE
INSERT AND SS® or RS®
BADGE
SLP’s injection molded grille insert
provides a landing pad to accept the
SS or RS badges (GM official licensed
product), replacing the GM supplied
Bowtie emblem.
2010 CAMARO GRAPHICS PACKAGES
Only looking for 2010 Camaro appearance enhancements?
SLP offers two Graphics Packages for both V6 and V8
Camaros with and without GM installed stripes.
graphics package #1
14
ZL427 V8
1SS & 2SS
Automatic
Transmission
ZL327 V6
LS, 1LT & 2 LT
Manual/Automatic
Transmission
(for Camaros with GM installed stripes)
PowerFlo® Axle-Back Exhaust System
x
x
x
Includes:
• Rear Tail Light Black-Out Panel
Graphics in Gloss Black
• Rear 1/4 Panel Gill Insert Graphics
which fade from clear to Gloss Black
Blackwing Cold-Air Induction System
x
x
x
SLP Custom Tune
x
x
x
25% Underdrive Pulley/Harmonic Balancer
x
x
Functional Rear Spoiler
x
x
x
20” 5-Spoke Red Line Wheels with Machined Spoke Face & ZL Center Caps
x
x
x
Rear Tail Light Panel Graphics in Gloss Black x
x
x
graphics package #2
Rear 1/4 Panel Gill Inserts in Clear to Gloss Black Fade (1L/1R)
x
x
x
(for Camaros without GM installed stripes)
ZL454/427/327 Exterior Badges
x
x
x
Includes:
• Rear Tail Light Black-Out Panel
Graphics in Gloss Black (shown above)
• Rear 1/4 Panel Gill Insert Graphics
which fade from clear to Gloss Black
(shown above)
• Gloss-Finish, Heritage-Style Hockey Stick
Stripe Vinyl Graphics in Black, White,
Hugger Orange, Silver
ZL454/427/327 Embroidered Premium Floor Mats
x
x
x
ZL454/427/327 Dash Plaque & Key Fobs
x
x
x
Leather (faux) Bound Portfolio, Owner’s Manual & Window Sticker
x
x
x
Adjustable Sway Bar Package
x
x
x
Sport Suspension Spring Package
x
x
x
Performance RTM Hood with Functional Heat Extractor Scoop
x
x
x
Fascia Closeout Panel Insert
x
x
Rally-Style Dual Painted Stripes (only available with Performance Hood option)
x
x
x
Heritage-Style Hockey Stick Stripe Graphics (1L/1R)
x
x
x
20” x 8” Front and 20” x 9” Rear Toyo Proxes Tires
x
2010 CAMARO APPEARANCE ITEMS AVAILABLE SEPARATELY
These appearance enhancing items can be purchased as stand-alone parts.
Injection molded grille insert
provides a landing pad to accept
the SS or RS badges (GM official
licensed product), replacing the
GM supplied Bowtie emblem.
ZL® CAMARO STANDARD CONTENT
ZL454 V8
1SS & 2SS
Manual
Transmission
Injection molded close-out
panel insert available in
all factory Camaro
colors (V8 only).
®
ZL® CAMARO OPTIONAL CONTENT
Heritage-Style SS Badges for Front Grille and Rear Panel
x
x
Heritage-Style RS Badges for Front Grille and Rear Panel
x
Front Grille Insert for SS and RS Badges
x
x
x
ZL454/427/327 Silver Fabric Car Cover
x
x
x
15
®
®
from
Creating a New Generation of Classics!
Phone (810) 724-8703
Fax (810) 724-8789
www.slpcamaro.com
Printed in USA. Copyright 2009 SLP Performance Parts, Inc., Toms River NJ USA.
PowerFlo, SLP, ZL, and Blackwing are trademarks of SLP Performance Parts, Inc., all rights reserved. Chevrolet, Chevy, Camaro, SS, RS and their respective logos and emblems are trademarks and/or service marks of General Motors Corporation, its
subsidiaries, affiliates or licensors. SLP reserves the right to make changes at any time, without notice, to colors, materials, part specifications, availability, and pricing.