The Warner and Swasey Collection - Blog@Case

Transcription

THE
WARNER AND SWASEY
COLLECTION
Incorporating Certain Papers of
Worcester R. Warner
Ambrose Swasey
The Warner & Swasey Co.
Special Collections
University Libraries
Case Western Reserve University
In August 1974, The Warner & Swasey Co. deposited in the Special Collections of
Case Western Reserve University Libraries the papers described in the following pages. The
Warner and Swasey Collection includes correspondence of both Worcester R. Warner and
Ambrose Swasey as well as early corporate and engineering records of the company they
founded. The greatest part of the Collection deals with the instruments, especially telescopes
and observatories, engineered and built by The Warner & Swasey Co.
lt is particularly fitting that this Collection should come to Case Western Reserve
University. Both Mr. Warner and Mr. Swasey were keenly interested in and supported the
forerunners of the present University. Also, Mr. Swasey's personal correspondences were
donated to the University Libraries by Mr. and Mrs. Warren G. Henderson and is now
housed with The Warner and Swasey Collection.
The Warner & Swasey Co., in addition to transferring this Collection to the Case
Western Reserve University Libraries, generously underwrote the processing and cataloging
of the material. Without that support, the Collection would have remained minimally useful
to future scholars. lt can now be consulted with ease by any qualified researcher. The
University Libraries are grateful to Mr. C. William Bliss, Vice Chairman, Mr. Joseph T.
Bailey, Chairman and President, and the Warner & Swasey Co. for their assistance and
support in this important project. Steven W. Gelston ably carried out the processing of this
Collection.
7.
WORCESTER REED WARNER b. May 16, 1846, Cummington, Massachusetts
d. June 25, 1929, Eisenach, Saxe-Weimar, Germany
In school, young WARNER showed keen delight in the study of physics and
mathematics. At the age of 19, he completed his schooling with a three-month term under G.
Stanley Hall, who was then a student at Williams College, and later president of Clark
University. WARNER secured his first employment in the drafting room of the American
Safety Steam and Engine Company, Boston, in 1865. When the company moved to Exeter,
New Hampshire, in 1866, WARNER moved with it. It was at this time that he met his future
partner, AMBROSE SWASEY. In 1869,WARNER and SWASEY decided to start out
together, securing positions at the Pratt and Whitney Company in Hartford, Connecticut.
Within two years both had been placed in charge of departments; WARNER was the foreman
of the machine-tool-building department. In 1873, at a Boston exhibit, and in 1876, at the
Centennial Exposition in Philadelphia, WARNER was in charge of the Pratt and Whitney
Company display. In 1878, WARNER made his first trip to Europe on which he first
demonstrated his uncanny ability to "get into places".
In 1880, WARNER and SWASEY decided to leave Pratt and Whitney to establish a
business of their own in the mid-west. Initially, they settled in Chicago but in 1881 moved to
Cleveland. In 1890, WARNER married Cornelia F. Blakemore of Philadelphia. In 1911, he
retired from active business, settling in Tarrytown, New York.
In addition to his outstanding success as an engineer and manufacturer, WARNER in
his 30 years in Cleveland, became one of the leading men in the city in civic and financial
affairs. He was Director of the Guardian Trust Company, and the Society for Savings;
Trustee of Western Reserve University, and Case School of Applied Science; and one of the
early presidents of the Cleveland Chamber of Commerce. WARNER was a charter member
of the American Society of Mechanical Engineers, and its president in 1897, and a member
of various astronomical and engineering societies, both in the United States and abroad.
Warner contributed liberally to various universities, churches, and other institutions,
including the Cleveland Museum of Art; and the towns of Cummington, Massachusetts, and
Tarrytown, New York.
AMBROSE SWASEY b. December 19, 1846, Exeter, New Hampshire
d. June 15, 1937, Exeter, New Hampshire
SWASEY'S formal education was limited to that offered by the elementary school at
Exeter. Leaving his father's farm at the age of 19, SWASEY became an apprentice in the
Exeter Machine Works. Here, two years later, he met, worked with and for several years
lived with, his future partner, WORCESTER R. WARNER. Together in 1869 the friends
went, as master machinists, to work for the Pratt and Whitney Company in Hartford,
Connecticut. SWASEY was soon placed in charge of the gear-cutting department. SWASEY
devised improved methods of manufacturing machine gears, including the first method of
generating and cutting teeth of spur gears entirely by mechanical processes. In the spring of
1880, SWASEY and WARNER went west to start a business of their own in Chicago. A year
later the company of WARNER & SWASEY was relocated in Cleveland. SWASEY had an
intense interest in the advancement of the engineering sciences. He was a charter member of
the American Society of Mechanical Engineers and its president in 1904, and a member of
numerous other engineering societies. Through his generous financial support, the
Engineering Foundation was established. He received many honorary degrees, numerous
awards and honors including: Chevalier of the Legion of Honor (France),1901; Officer of the
Legion of Honor (France), 1921; The John Fritz Gold Medal, 1924; The City of Cleveland
Medal for Public Service, 1930; Gold Medal of the Franklin Institute, 1932; Gold Medal of
the American Society of Mechanical Engineers, 1933; and the Hoover Gold Medal, 1935.
SWASEY was a generous benefactor of several universities, including Denison, Case
School of Applied Science, and Nanking University, China; as well as to various churches
and other institutions.
In 1871, SWASEY married Livonia D, Cummings. She died in 1912.
THE WARNER & SWASEY COMPANY
In 1880, WORCESTER R. WARNER and AMBROSE SWASEY, two New England
machinists, decided to establish a machine business of their own in the mid-west. From
boyhood days, both WARNER and SWASEY showed a consuming interest in things
mechanical. WARNER early developed an interest in astronomy and built a small telescope,
and SWASEY was interested in fine mechanisms, later becoming an expert on the subject of
gearing. The founding of their own machine tool plant gave them an opportunity to
demonstrate these interests in a very practical way. Machine tools are precision instruments.
The equipment, which made machine tools, could therefore make telescopes. Initially the
partners settled in Chicago, but in 1881 they relocated the company in Cleveland. Though the
company was founded in 1880, it was not incorporated until 1900 and these incorporation
papers actually constitute the first written agreement between the founders.
The partnership of these two men was an unusual one in the annals of American
business. Each one supplemented the other. It used to be said that WARNER could sell
anything that SWASEY could make, and that SWASEY could build anything that WARNER
believed he could sell. WARNER had an instinct for business development and skill in
dealing with people. SWASEY had a passion for precision, skill, and accuracy. This
combination built the WARNER & SWASEY COMPANY.
From the beginning, the WARNER & SWASEY COMPANY has been known in two
seemingly unrelated fields, turret lathes and astronomical telescopes. Their principle work
was the designing and manufacturing of machine tools of the highest quality: turret lathes,
planers, grinding machines, etc., at which they achieved great success; but always they were
interested, as a decidedly minor activity, in the designing and constructing the mountings of
astronomical instruments. They achieved distinction for their efforts in three separate
occasions of designing and building the world's largest telescope: the Lick telescope for the
University of California, a 36" object-glass, in 1887; the Yerkes telescope for the University
4
of Chicago, a 40" object-glass, in 1897; and the 72" reflecting telescope for the Dominion
Astrophysical Observatory in Vancouver, Canada, in 1916.
The WARNER & SWASEY COLLECTION is divided into two segments, Personal
and Company. The Personal section is divided into material dealing with WORCESTER R.
WARNER, and AMBROSE SWASEY. There is little material collected pertaining to
WARNER. The overwhelming majority of material collected here is related to SWASEY. Of
special note are SWASEY'S diaries and his collection of personal clippings, mounted and
bound. There is some correspondence between the two men. This is arranged between the
two sections chronologically.
The section entitled Company is also divided into two groups, company and article file.
The company section is divided into categories, arranged alphabetically. The dates of this
collection range from 1880 to 1967. Most of the material, however, is of the late 19th and
early zo- centuries. The bulk of the material deals with the instruments manufactured by the
WARNER & SWASEY COMPANY, especially Telescopes and Observatories. The material
on Telescopes and Observatories is arranged by the name of the institution for which the
instruments were contracted, not by the Observatory's name. (i.e. University of Chicago, not
Yerkes Observatory). Instruments for foreign institutions are arranged by country (i.e.
Canada for Dominion Astrophysical Observatory). Of special note is the material concerning
Case School of Applied Sciences (Warner & Swasey Observatory); University of California
(Lick Observatory); University of Chicago (Yerkes Observatory); University of Texas
(McDonald Observatory); Argentina (Observatorio Nacional de Cordoba); and Canada
(Dominion Astrophysical Observatory). The ledgers of the Company are also of special
interest.
The article file has been maintained in its original numerical order. This is not solely
a grouping of articles written by or about the WARNER & SWASEY COMPANY. Included
in this order are periodical articles, talks by Company personnel, and correspondence relating
to various articles and/or topics. A list has been made describing the contents of the files,
numbered A-IA to A-507. An index has been compiled of the authors of the articles, memos,
and correspondences that appear in the files. Following each name is a list of the files in
which these documents can be located.
Worcester Reed Warner and Ambrose Swasey
(personal)
Box 1
Worcester R. Warner: Biographical.
Worcester R. Warner: Correspondence. (see Appendix A)
Worcester R. Warner: Obituaries and Tributes. (2)
Worcester R. Warner: Publications.
Worcester R. Warner: Recollections and Miscellaneous.
Worcester R. Warner: Cornelia Blakemore Warner (wife).
Worcester R. Warner: Cornelia Blakemore Warner Letters from Afar.
Worcester R. Warner: Photographs.
Box 2
Messrs Warner and Swasey: Correspondence between them 1902-29.
Messrs Warner and Swasey: Articles mentioning them.
Messrs Warner and Swasey: Photographs.
Messrs Warner and Swasey: Photographs, homes.
Ambrose Swasey: Addresses.
Ambrose Swasey: Biographical, Book 1, Part 1.
Box 3
Ambrose Swasey: Biographical*, Book 2, Part 1.
Ambrose Swasey: Biographical, miscellaneous.
Ambrose Swasey: Biographies.
Ambrose Swasey: Clippings, 1901-1937.
Ambrose Swasey: Clippings, AS and The Engineering Foundation, 1915.
Ambrose Swasey: Personal Clippings, 1900-1904.*
Box4
Box 5
Box 6
Ambrose Swasey: Personal Clippings, 1918.*
Box7
Box 8
Box 9
Ambrose Swasey: Clippings, 1934+
Box 10
Ambrose Swasey: Clippings, Birthday 1936.+
Ambrose Swasey: Clippings, Hoover Medal Presentation, 1937.+
Ambrose Swasey: Correspondence (see Appendix A).
Ambrose Swasey: Correspondence - Herbert Hoover.
Ambrose Swasey: Diaries - 1877; 1879; 1887; 1888; 1889; (2) 1890; 1892;
1893, in two parts.
Ambrose Swasey: Diaries - (2) 1894; 1895; 1896; 1897; (2) 1898; 1899.
Box 11
Ambrose Swasey: Diaries Ambrose Swasey: Diaries Ambrose Swasey: Diaries Ambrose Swasey: Diaries Ambrose Swasey: Diaries -
Box 12
Ambrose Swasey: Diaries - 1920; 1921; 1922; 1923; 1924; 1925.
Ambrose Swasey; Diaries-1926; 1927; 1928; 1929; 1930; 1931.
Ambrose Swasey: Diaries - 1932; 1933; 1934; 1935; 1936; 1937;
extracts from diaries, 1868-1921.
Ambrose Swasey: Genealogy of The Swasey Family.
Box 13
Ambrose Swasey: Honors and Tributes, 1899-1922. (see also oversize)
Ambrose Swasey: Honors and Tributes, 1924.
Ambrose Swasey: Honors and Tributes, John Fritz Award Booklet, 1924.
Ambrose Swasey: Honors and Tributes, 1929-1936.
Ambrose Swasey: Honors and Tributes, 1936-1937.
Ambrose Swasey: Obituaries (2).+
Box 14
Ambrose Swasey: Publications.
Ambrose Swasey: Scrapbook.
Ambrose Swasey: Scrapbook - Astronomy.
Ambrose Swasey: Societies - American Society of Mechanical Engineers.
Ambrose Swasey: Societies - Engineering Foundation, Correspondence.
1899; 1900; 1901; 1903; 1908; 1909; (2) 1910.
1919-1923; 1924-1925.
1902; 1903; 1904; 1905; 1906; 1907.
1908; 1909; 1910; 1911; 1912; 1913.
1914; 1915; 1916; 1917; 1918; 1919.
Ambrose Swasey: Societies - Engineering Foundation: Inauguration,
Anniversary, Articles.
+ mounted
7
Ambrose Swasey: Societies - Engineering Foundation: Publications (2).
Ambrose Swasey: Societies - National Research Council.
Box 15
Ambrose Swasey: Travel Logs - 1887; 1887-1888; 1889.
Ambrose Swasey: Travel Logs - 1894; 1897; 1898.
Ambrose Swasey: Travel Logs - 1900; 1902-1903.
Ambrose Swasey: Miscellaneous Small Books - 4 notebooks, n.d.: address
book, 1911 & 1921.
Ambrose Swasey: Photographs. (see also oversize)
Ambrose Swasey: Photographs - Birthdays.
Ambrose Swasey: Photographs, with others; negatives.
Ambrose Swasey: Miscellaneous.
Box 16
Ambrose Swasey: Clippings Relative to Friends, 1893-1910.*
Ambrose Swasey: Clippings Relative to Friends, 1911-1915.*
Ambrose Swasey: Clippings Relative to Friends, 1920-1924.* (wrapped)
Warner & Swasey Company
Box 17
Anniversaries: Twenty-fifth, 1906; Thirtieth, 1910.
Anniversaries: Fortieth, 1920.
Anniversaries: Fortieth, Anniversary Book (3).
Anniversaries: Fiftieth, 1930.
Anniversaries: Fiftieth, Anniversary Book (3).
Anniversaries: Sixtieth, 1940; Seventy-fifth, 1955.
Box 18
Apprenticeship Papers - (see also oversize: work identures, diploma).
Articles
Correspondence: A. - Blinn. (see Appendix B).
Correspondence: Brashear.
Correspondence: Braymer - G.
Correspondence: H - L.
Correspondence: M - R.
Correspondence: S.
Correspondence: T - Y.
Correspondence: Instrument Inquiries.
Correspondence: Telescope Inquiries.
Box 19
Correspondence: Letter Book, 1882 -1883.
Correspondence: Letter Book, 1/3/1890 - 3/15/1890.
Notebook, 1886 - 1888.
Box 20
Employee Relations
Engineering Reports; 1923 - 1938.
Engineering Reports; 1939; 1940.
Exhibitions - awards, visitor booklet.
Expense Accounts, 1890's.
Shipping Expenses.
History, (see also Box 20); Archives.
Instruments: General. (see also Box 20 and Photographs)
Instruments: Altazimuth; Azimuth.
Instruments: Binoculars, BOFORS gun; Construction Equipment;
Chronograph;
Box 21
Instruments: Dividing Engine; Fire Control.
Instruments: Micrometer, Position Finder; Prism.
Instruments: Radar Equipment, 1943-1945.
Instruments: Range Finder; Spectroscopes.
Instruments: Telescopes and Observatories, General.
Instruments: Telescopes and Observatories, Data on Telescopes, Domes and
& Astronomical Instruments (2).
Instruments: Telescopes and Observatories, list of company made telescopes.
Instruments: Telescopes and Observatories, miscellaneous.
Box 22
Instruments: Telescopes and Observatories, Alabama Polytechnic Institute Brigham Young University. (see index of Universities and
Observatories - Appendix C).
Instruments: Telescopes and Observatories, Brooklyn College - Carleton
College.
Instruments: Telescopes and Observatories, Case Institute of Technology
(CWRU); 1950 -1971.
Instruments: Telescopes and Observatories, Case Institute of Technology
(CWRU); 1936 -1947.
Instruments: Telescopes and Observatories, Case School of Applied Science
(CIT) (CWRU); 1930, 1920.
Instruments: Telescopes and Observatories, Chamberlain Observatory Denison University.
Instruments: Telescopes and Observatories, DePauw University - Gallandet
College.
Box 23
Instruments: Telescopes and Observatories, Hartford Public Schools Lowell Observatory.
Instruments: Telescopes and Observatories, Miami University - Ohio State
University.
Instruments: Telescopes and Observatories, Ohio Wesleyan University.
Instruments: Telescopes and Observatories, Smith College Observatory Trinity College.
Instruments: Telescopes and Observatories, United States Naval
Observatory; 1900-1966.
Instruments: Telescopes and Observatories, United States Naval
Observatory; 1886-1895.
C)
Box 24
Instruments: Telescopes and Observatories. University of AlabamaUniversity of California (Berkeley).
Instruments: Telescopes and Observatories, University of California;
1938 -1953.
Instruments: Telescopes and Observatories, University of California; 18871947.
Instruments: Telescopes and Observatories, University of California; 18851887.
Instruments: Telescopes and Observatories, University of California; 1881 1884.
Instruments: Telescopes and Observatories, University of California;
photographs & pamphlets.
Instruments: Telescopes and Observatories, University of Chicago
Instruments: Telescopes and Observatories, University of Chicago;
pamphlets; 1905 - 1951.
Box 25
Instruments: Telescopes and Observatories, University of Chicago;
pamphlets, 1892 - 1897.
Instruments: Telescopes and Observatories, University of the City of Toledo
- University of Michigan.
Instruments: Telescopes and Observatories, University of Minnesota University of Pennsylvania.
Instruments: Telescopes and Observatories, University of Texas; 19381955.
Instruments: Telescopes and Observatories, University of Texas, 19321937.
Instruments: Telescopes and Observatories, University of Texas, pamphlets
& clippings.
Instruments: Telescopes and Observatories, University of Texas; dedication;
5/5/39.
Instruments: Telescopes and Observatories, University of Texas; dedication
book.
Box 26
Instruments: Telescopes and Observatories, University of Texas; dedication
book (2).
Instruments: Telescopes and Observatories, University of Texas;
Correspondence re: model; 1936 - 1959.
Instruments: Telescopes and Observatories, University of Toledo - Virginia
Polytechnic Institute.
Instruments: Telescopes and Observatories, Warner Observatory - Yankton
College.
Instruments: Telescopes and Observatories, Argentina - Observatorio
Nacional de Cordoba.
Instruments: Telescopes and Observatories, Canada - Dominion
Astrophysical Observatory.
10
Box 27
Astrophysical Observatory; articles, visitor guide.
Astrophysical Observatory; pamphlets (2).
Instruments: Telescopes and Observatories, Foreign; Africa -Poland.
Instruments: Telescopes and Observatories, Foreign; Russia - General.
Instruments: Battery Commander's Telescope; Telescopic Sight.
Instruments: Panoramic Sight.
Instruments: Turret Lathe.
Box 28
Instruments: Turret Lathe.
Instruments: Turret Lathe; Machine Tools.
Invitations and Celebrations.
Letterheads.
Michelson and Morley Experiment.
Personnel: Allen; J.T. Bailey; W.K. Bailey; P.E. Bliss.
Personnel: John A. Brashear.
Personnel: Edward P. Burrell.
Box 29
Personnel: Myron C. Curtis - Talks, 1954-1963.
Personnel: Myron C. Curtis - Talks, 1948-1953.
Personnel: Myron C. Curtis - Talks, 1945-1947; personal, patents.
Personnel: Myron C. Curtis - Duplicate Talks, 1948-1960; G.L. Fecker.
Personnel: James C. Hodge
Personnel: Ernest N. Jennison - The Story of Warner & Swasey Telescopes
1880-1951.
Personnel: S. Lawson; C.A.R. Lundin; L.D. McDonald: D.M. Pattison.
Box 30
Personnel: Walter E. Reed - Paris Exposition Photographs (2).
Personnel: EA. Scott; W. Seely; O.J. Stilwell.
Personnel: Wamer Seely - Astronomical Articles by famous astronomers
saved by WS.
Personnel: Charles J. Stilwell- Where Precision Reigns, 1940.
Personnel: Charles J. Stilwell- Where Precision Reigns, 1944;
C.S. Stilwell; talk by unknown W&S official,12/30/41.
Promotional Material.
Publications - Company Newspaper. (see also flat box).
Box31
Publications: Catalogues; 1884, 1887, 1889.
Publications: Catalogues; 1901.
Publications: Catalogues; 1903. (2)
11
Box 32
Box 33
Publications: Machine Catalogue; 1887 - 1919.
Box 34
Box 35
Sales Manual (Obsolete): "A" Type Turret Lathe, 1928.
Sales Manual (Obsolete): "RAM" and "A" Type Turret Lathe, 1936.
Sales Manual: Turret Lathes and Tools, 12/15/43. (2)
Secretary's Report, 1911; Stockholder's Report, 1966; 1967.
Visitor's Guide, 1915.
Photographs of Company Building. (see also oversize).
Pratt & Whitney - Company History; (mentions Wand S).
Box 36
John A. Brashear Co., 1894 - 1896.
History: Data Pertaining to founding, and growth to 1/1/1900.
History: Data on move to Cleveland, 1880.
Instruments: Chronograph (Prof. Creshore and Lt. Squier) 1896.
Instruments: Meridian Circle - U.S. Government Observatory
Contract and Specification, 1893 -1896.
Instruments: Ranger Finder, U.S. Government Board of Ordinance and
Fortification, 1898 - 1899.
Instruments: Wood Screw Machinery, 1892-1894.
Instruments: Telescopes and Observatories; Case School of Applied
Science, 1899; Western Reserve University, 1899.
Instruments: Telescopes and Observatories; CSAS; Warner & Swasey
Observatory; contract specification, 1919-1920.
Instruments: Telescopes and Observatories; CSAS; Observatory, 1920.
Instruments: Telescopes and Observatories; Central Manual Training
School, 1894-1896.
Instruments: Telescopes and Observatories; Ohio Wesleyan University;
60" Telescope & Dome, 1923-1924.
Instruments: Telescopes and Observatories; U.S. Government; 26"
Equatorial telescope; remounting, 1890-1897.
Instruments: Telescopes and Observatories; U.S. Naval Observatory; 15"
Photographic Telescope, contract dated 11/10/32.
Instruments: Telescopes and Observatories; University of California; 20"
Double Photographic Telescope, mounting, 1919-1936.
Instruments: Telescopes and Observatories; University of Chicago,
1890-1897.
Instruments: Telescopes and Observatories; Wesleyan University,
Box 37
18 1/2" Equatorial Telescope, 1914.
Instruments: Telescopes and Observatories; Argentina - Obervatorio
Nacional de Cordoba; 60" Telescope, 1912-1936.
Instruments: Telescopes and Observatories; Canada - Dominion Astrophysical Observatory, 1915-1916.
Instruments: Telescopic Sights.
Instruments: Telescopes - expenses incurred setting up.
Inventory, 1883; Orders, by departments, 1896.
Data taken aboard, 1897-1898.
Miscellaneous: contract for knitting machines; selling AS's right and title
in Epicycloridal Milling Machine; Sale of Patent shares to
WRW; Patent license to Hancock Inspiration Co.; AS notes,
1900.
Cash Book, 12/1880-9/1882.
Time Book, 5/1880-2/1882.
Box 38
Daily Journals:
Daily Journals:
Daily Journals:
Daily Journals:
1894.
1895.
1896.
1900.
Box 39
Invoice Book: 6/1880-12/1885.
Sales Book: 8/2/1880-12/1887.
Sales Book: 12/1887-7/1892.
Box 40
Scrapbook, 1886-1914.
Scrapbook, 1895-1899.
Box 41
Photographs: Instruments; Altazimuth-Dividing Engine.
Photographs: Instruments; Domes, by institution, ABC.
Photographs: Instruments; Photographic Doublet - Position Finder.
Photographs: Instruments; Radar Antennas, 1943-1945, (Sales Order
#798367-J; 9718B-2; 9759A-FF).
Photographs: Instruments; Radar Antennas
Photographs: Instruments; Range Finder - Spectrometer
Photographs: Instruments; Telescopes and Observatories; by size: 2"-15".
Photographs: Instruments; Telescopes and Observatories, by size: 181/2"-
24".
Box 42
Photographs: Instruments; Telescopes and Observatories, by size: 26",
University of California - 40" University of
Chicago.
Photographs: Instruments; Telescopes and Observatories, by size: 60"
Reflective, Argentina.
Mt. Wilson Solar Observatory.
Ohio Wesleyan University.
Reflecting - Canada.
University of Texas. (2)
Box 43
University of Texas. (2)
Reflecting, model.
Photographs: Instruments; Telescopes, Field - Miscellaneous.
Photographs: Instruments; A Few Astronomical Instruments. (3)
Box 44
Photograph Book: #1, pictures #IA-l90A.
Photograph Book: #2.
Photograph Book: #3, pictures #400-1584.
Box 45
Photograph Book: #6, 72" Reflecting Telescope, Canada-Dominion Astrophysical Observatory.
Photograph Book: #8, 60" Reflecting Telescope, Argentina, Observatorio
Nacional de Cordoba.
Photograph Book: #9, 60" Reflecting Telescope, Argentina, Observatorio
Nacional De Cordoba.
Box 46
Photographs: pictures #5126-5131.
Photograph Book: #12,60" Reflecting, Ohio Wesleyan University.
Photograph Book: #13, Ohio Wesleyan University.
Photograph Book: #15, University of Texas.
Box 47
Photograph Book: University of Texas. (2)
Photograph Book: #21, University of Minnesota, University of California,
CSAS, Brooklyn College.
*List of Photographs in books, by number of the negative.
14
Box 48
Photographs: University of Chicago.
Photographs: Scrapbook. (2)
1'\
Warner & Swasey Company - Article File
Box 1
Articles
list, Appendix E).
Articles:
Articles:
Articles:
Articles:
Articles:
Articles:
lA-lB. (see attached author index, Appendix D; and title/subject
1C-2A.
3.
5-21.
22-43.
44-61.
62-73.
Box 2
Articles: 74-83.
Articles: 84-109.
Articles: 110-132.
Articles: 134-144.
Articles: 145-161.
Articles: 162-171.
Box 3
Articles:
Articles:
Articles:
Articles:
Articles:
Articles:
174-197.
198-205.
207.
208-219.
220-250.
251-264.
Box 4
Articles:
Articles:
Articles:
Articles:
Articles:
Articles:
265-279.
280-289.
290-304.
305-330.
331-350.
353-364.
Box 5
Articles: 365-379.
Articles: 380-398.
Articles: 399-402.
Articles: 403-406.
Articles: 406A-419.
Articles: 420-431.
Box 6
Articles: 432-441.
Articles: 442-447.
Articles: 448-460.
Articles: 461-466.
1n
Articles: 467-477.
Articles: 478-485.
Box 7
Articles: 489-502.
Articles: 503-507.
Glass Slides
Glass Slides & Negatives
Glass Slide Index
Flat Box
1: Ledger, 10/80-12/31/87 (I" Ledger of Company).
2: Company Newspaper, 1/46-7/61 (not complete).
Work Indenture: EE. Bender, 4/3/1882; Joseph Leatham, 7/13/1880;
Charles E Gross, 7/28/1890. (copy)
Diploma - apprenticeship to the machinist trade - Charles E Gross,
9/25/1895. (copy)
3: Scrapbook.
4: Scrapbook.
Scientific American, 3/17/1888, University of California.
Scientific American, 12120/1909, University of Chicago.
5: Scrapbooks. (2)
Oversize
Photographs - Warner and Swasey. (2)
Photographs - Ambrose Swasey. (9)
Photographs - Warner & Swasey Plant.
Scrapbook.
Department of State Certificate - AS, Delegate for U.S. to International
Congress on Commercial Instruction at Vienna 9/12- 16/10.
Poster for 40 th Anniversary Celebration.
Diagram of Taper Spend1es used by Pratt & Whitney, drawn by AS
11/20/79 Hartford, Connecticut.
Poster - "Hudson Entertainment Lecture Course presented by Hudson
Men's Club ...benefitofHigh School Library ....Mr. W.R. Warner
November 19 (1908) lecture on Egypt & Pyramids."
Hartford Courant 10/5/30 Pratt & Whitney Spread, (Wand S pictured).
Cleveland Plain Dealer - Art Gravure Section 7/4/1939 AS Spread.
AS - birthday greeting from friends at Pratt & Whitney 1936.
17
Appendix A
Index of Correspondents of Worcester R Warner (WRW); and Ambrose Swasey (AS).
AS
WRW
AS,WRW
WRW
AS
WRW
AS,WRW
WRW
WRW
WRW
WRW
AS
AS
AS
WRW
AS
WRW
WRW
AS
AS
AS
AS
AS
AS
AS
WRW
WRW
WRW
WRW
AS
WRW
WRW
WRW
AS
AS
AS
AS
WRW
AS
AS
Bacon, Henry
Baker, Elbert A.
Baker, Newton D.
Baker, Motor Vehicle Co.
Barnard, E.E.
Belt Line
Brashear, John A.
Brayton, George B.
Burlingame, Wm.
Burton, Senator Theodore E.
Carter, Mrs. Robert
Case, Eckstein (see Case School of Applied Science)
Case School of Applied Science
Chapple, Joe Mitchell
Chisholm - Phillips Automobluim Co.
Cleveland Police Department
Cobb, John N.
Coolidge, Calvin
Crane, Charles R
Crane, RT., Jr.
Cumming, Hugh S.
Cushing, Harvey
Cutler, James G.
Denison University
Dickens, Edith P.
Duke, George L.
Elliot, Henry W.
Euclid Ave. Property Owners, Committee of
Floyd, RG.
French, Daniel Chester
Garfield, James R
Giering, Robert Xavier
Gobeille, J. Leon
Goethals, George W.
Grassle, W.W.
Griebly, AW
Hammond, John Hays
Herrick, Myron
Hoover, Herbert
Howe, Charles H. (see Case School of Applied Science)
lR
AS
AS
WRW
AS
WRW
AS
AS
WRW
WRW
AS
WRW
WRW
AS
AS
AS
WRW
AS
AS
AS
AS
AS
AS
WRW
WRW
AS,WRW
AS
WRW
WRW
AS
AS
Hughes, Charles Evans
Hunt, Charles Wallace
Johnson, Tom L.
Kelly, SJ.
Kline, H.M.
Leland, Henry M.
Lincoln, Robert
National Daylight Association of Cincinnati
Newcomb, Simon
Nichols, C.A.
Ohio - Secretary of State - Automobile Dept.
Panama Canal
Pray, Thomas Jr.
Pupin, Michael I.
Quail, Frank. (see School of Applied Science)
Rockefeller, John D.
Rockefeller, John D., Jr.
Ryder, James F.
Smithsonian Institution
Staffard, O.M.
Struve, Otto
Thymy, E.S.
Trouvelot, George H.E.
United States Government
Warner, Cornelia Blakemore (Mrs. W.R. Warner)
Wellman, S.T.
White, Walter C.
Whitney, Amos
World's Columbian Commission
Miscellaneous, unknown correspondent.
19
Appendix B
Index of Correspondants of Warner & Swasey Company
A. Clark & Sons
Advance Orthopedic Company
A.G. Haraugh & Company
Allen
A.M. Powell & Company
American Machinist
Astrophysical Journal
Baker
Ball
Bardens & Oliver
Bartlett & Company
Beale
Belfield
Bixhop
Blatchford
Blinn
Brashear
Braymer
Bresnahan
Budgman
Brown
Bullard
Burckhalter
Burgess
Butler
Butman Furnace Company
Chandler & Company
City of Chattanooga
Church
Christy
Clacey
Clements
Claigh
Candit, Fuller & Company
Connally
Davis, Charles H.
Davis, Robert
Durkee & Doe
Elson
Fleming Diamond Drill Company
Gans
German Society of Mechanical Engineers
Great Britain - patent office
Gundlach Optical Company
Hale, G.E.
Hale, W.E.
Hanchett
Haren
Harrison
Higgins
Horne
Hurdbut
Kahler
Kerscher
Kussner
Lamb & Rich
Lincoln
Lloyd
Mallinckrodt Chemical Works
Mason
Maury
McLean
Michelson
Mineur
Morley
Morton
National Exposition of Railway Appliances
Niles-Bement-Pond Company
The Optician
OPTO Mechanisms, Incorporated
Parr & Carpenter
Patton
Pearson
Peters
Philbrick
Pratt
Renshaw
Rice Rickert
?.o
Engineering: an illustrated weekly journal
Riley
Ewell
Ritchey
Fauth & Company
Roberts
Rockwell
Rocky Mountain Mining Review
Rogersen
Shankland (CWRU professor of physics)
Smith
Smithsonian Institution
Stendicke
Tatlock
Thurston and Kuris
Tydeman
United States Air Force
United States Army
United States Coast & Geodetic Survey Office
United States District Judge
United States Government: panoramic sights
West
White
Woodside
Yerkes
Young
?1
Appendix C
Instruments: Telescopes and Observatories
(W & S Company, Box 5-11)
Alabama Polytechnic Institute
Albion College
Alegheny Observatory
Amherst College Observatory - Lawrence Observatory
Balwin - Wallace College
Beloit College
Brigham Young
Brooklyn College
Buchtel College
Buchnell University
Burr & Burton Seminary
Butler University
California Institute of Technology
Carleton College
Case Institute of Technology (Case School of Applied Science) (CWRU) - (W&S
Observatory)
Central Manual Training School (Box 20)
Chabot Observatory (see Oakland School System)
Chamberlain Observatory
Cincinnati Observatory
College of Puget Sound
Columbia College
Cornell University
Davidson Observatory
Dearborn Observatory
Denison University - (Swasey Observatory)
DePauw University - (McKim Observatory)
Doane College
Dudley Observatory
BUC Durfee High School
Fisk University
Flint Junior College
Gallandet College
Hartford Public Schools
Harvard College
Haverford College
Hiram College
Houston High School
??
Indiana University
State University of Iowa
Johns Hopkins University
Lafayette College
Lake Erie Seminary
Lehigh University
Leland Stanford Junior University
Lowell Observatory
Miami University
Millsaps College
Mississippi State College
Montana State University
Mount Wilson Solar Observatory
National Astronomical Observatory
New River State College
New Windsor Observatory
Northwestern University
Oakland Public Schools - (Chabot Observatory)
Ohio State University
Ohio Wesleyan University - (Perkins Observatory)
State University of Oregon
Packer Collegiate Institute
Pan American College
Park College
Pennsylvania State College
Princeton University
Racine College
Red House Observatory
Rose Polytechnic Institute
St. Horus University
St. Mary's School
San Diego State College
Shefield Scientific School (see Yale College)
Smith Observatory
Smith College Observatory
Swarthmore College - (Sproul Observatory)
Trinity College
United States Naval Observatory
University of Alabama
University of Arizona
University of California (Berkley)
University of California - Lick Observatory
University of Chicago - Yerkes Observatory
University of City of Toledo
University of Illinois
University of Kansas
':'3
University of Michigan
University of Minnesota
University of North Carolina
University of Notre Dame
University of Oregon
University of Pennsylvania - (Flower & Cook Observatory)
University of Texas - (McDonald Observatory)
University of Toledo - (Ritter Observatory)
University of Virginia - (Leander McCormick Observatory)
University of Wisconsin - (Washburn Observatory)
Vanderbilt University
Vassar College
Virginia Polytechnic Institute
Warner Observatory
Washington University
Wellesley College - (Whitin Observatory)
Williams College
Yale University (Yale College; Sheffield Scientific School of Yale College)
Yankton College
Argentina - (Observatorio Nacional de Cordoba)
Canada - (Dominion Astrophysical Observatory)
Foreign: Africa - Poland
Foreign: Russia - General
Telescopes: Battery Commander's Telescope; Telescope Sights; Panoramic Sight Turret
Lathe.
1.4
Appendix D
Author Index for Article File
J.P. Allen
E.T. Armstrong
W.K. Bailey
H.P. Balsom
J.P. Bank
Barnes
LJ. Bayer
Ee. Beaudet
G.V. Black
F.W. Blaisdell
c.r, Blake
P.E Bliss
RJ. Blyth
WJ. Burger
EP. Burrell
W.e. Burton
J.M. Callahan
G.B. Carson
Castle
N.B. Clark
RH. Clark
L.O. Coffin
L.M. Cole
A.S. CosIer
N.H. Cook
lE Craig
M.S. Curtis
N.P. Darash
C. DeCumbe
DeGraff
R Denton
FJ. Dost
W.E. Dowling
n.c. Ebersold
D.P. Eckman
e.D. Ferguson
H.W. Fortey
219,224,233,252,463.
345.
94,99,124,124,130,131,161,169,178,199,222,249,263,275,
280,292,431,435,439,441,444,456,471,486.
342, 357, 435.
377.
202.
29,454.
480.
137.
411.
408,503.
15,17,32,48,75,84,93,112,200.
148, 156.
7,30,119,121,150.
1a.
484.
254,306.
66.
202.
407.
210,216,234,236,273,281,433.
472.
421,465.
345.
490.
269.
239,267,270,283,286,287,293,294,303,338,341,343,358,
404,417,501.
438.
385.
30, 113.
356.
117.
443.
409,427.
473.
388.
41,95, 143.
J.D. Frank
RS. Frownfelter
ER Gardner
EB. Gausby
EV. Geier
G. Giraudi
EW. Gressle
RF. Griffin
D.M.Gumey
A.a. Haeme
L.R Hawkins
Herb
e. Himmelright
W.A. Hofman
J.J. Hogan
RT. Hook
e.a.
G. Hubbard
T.J. Hudson
H.B. Hunter
EN. Jennison
E.F. Katz
A.H. Keetch
D.R. Kibbey
J.e. Kline
G.L. Kluter
D. Knowlton
M.E. Lange
R LeGrand
EJ. Loeffler
J. Longnecker
J.R Longstreet
W.e. Mason
W.A.Maybom
A.J. McClelland
L.D. McDonald
J. McFadyen.
P.M. McKenna
J.R McLain
RH. Meister
L.M. Merrill
F. Meyer
RD. Moore
J.S. Morgan
E.L. Murray
50.
188.
29,366.
450.
405.
410,478.
195,201, 333, 382.
395a,417, 428, 496.
14, 14a, 63, 290.
461,477,497.
29,49.
37.
226, 227, 228.
295.
346.
432,437,445,446,447,451,460,461,462,467,468,476,477,
479,488,489,491,498,499,500,502,506,507.
33.
166.
384,462.
3,260.
345.
419.
495,507.
107.
5,85,208,326,401,483.
92,253,393.
61,72.
482.
417,466,469,481.
448,466.
10,46,51,100,124,125,126,130,131,282,318,322,363,417.
181.
374.
430,496.
11,55,132,194,217,265,279,314,315,381,402,403.
175, 183,321,365.
412.
268.
36.
15.
375.
495,507.
348.
229,297,298,300. 301, 304, 304a, 305, 307,308, 310, 311, 313,
316, 319, 320, 321a, 323,325,329,330, 332,334,335,336,
?n
J.1. Nassau
H.M. Nobis
H.A. Oldenkamp
W. Orebaugh
M.H.Palm
M.W. Papp
D.M. Pattison
T.T. Pechy
W. Pelich
F.L. Prentis
W.H.Rhea
K.S. Ridley
MJ. Rowan
W. Rudolf
W. Rudolph
D.H. Sammuelson
R.H. Schuman
F.A. Scott
W. Seely
W.M.Shook
Siedel
C. Smith
J.M. Spenser
A.A. Spisak
H.W. Spreitzer
c.i. Stilwell
T.L. Stilwell
D.S. Stoneman
R.T. Studer
A. Swasey.
N.W. Swenson
c.x, Taft
337,340,344,353,364,368,272.
238.
232,370.
175,176,183,247,276.
312.
413.
378, 425, 458.
171, 196, 231, 257a, 328,367,369,371,389.
424.
28.
82.
171.
350.
347,349.
395.
398a.
174.
289,331,391,455,472,473,485.
2a.
Ib, lc,3, 12, 13, 17, 18,21,22,26,28,29,30,35,39,40.41.42,
44,45,46,48,50,51,53,55,56,57,60,61,62,63,69,70,71,
73,74,77,78,79,80,81,83,84,85,86,88,90,91,92,97,99,
100, 102, 104, 108, 109, 111, 117, 119, 121, 129, 132, 134,
136, 140, 144, 151, 152, 153, 154, 155, 166, 170, 171, 175,
176, 178, 188, 197, 198,207,208,211, 213a, 220,224,227,
243, 247, 254, 271, 274a, 276, 288, 291, 297, 298,300,301,
304a,309, 321, 362, 391, 394, 396, 397, 398a,401, 406, 406a,
408,409,412,413,415,417,423,425,427,431,432,437,
442,444,445,453,455,458,460,461,466,468,482,483,
486,487,490,497,499,500,503.
452.
21.
355.
26.
243.
487.
27,31,38,42,53,59,83,118,127,129,135,142,149,152,155,
163,165, 195a, 197, 203, 204, 205, 211, 244, 246a, 250, 255,
256, 257b, 258, 259, 261, 262, 264, 266, 272, 274,304a,324,
350,359,376,379,380,400,412,420,422,424,426.
495,504.
296,394, 399, 406.
494.
18.
123, 162, 164.
473.
?.7
W.S. Tandler
N.W. Taylor
R. Thompson
c:». Ufford
S.W. Watkins
R. Whewell
J. Williams
S.P. Winchell
W.J. Wood
H.W. Worstell
T.e. Wright
418,493.
277.
397.
414,505.
87,89,111,151,218,284,354.
360.
339.
361,387,416,452.
470.
240.
158.
?.R
AppendixE
Title/Subject List by File
A-I
A-la
Ib
lc
Id
le
2
2a
3
4
5
6
7
8
9
10
11
12
"The Mechanics of the Telescope", paper before the American Association for
the Advancement of Science, by E.P. BURRELL, Director of Engineering,
December 1930; article in Mechanical Engineering, April vol. 53, no. 4.
"Telescopes "61" Reflector for Argentine National Observatory, Cordova,
Argentine, By WARNER SEELY, 1922, never released for publication.
"A New Sixty-inch Telescope for Perkins Observatory, Ohio Wesleyan
University", for Mechanical Engineering, 1924; correspondence between
WARNER SEELY and The American Society of Mechanical Engineers
relating to article.
Article on Development of Turret Lathes, July 15, 1929, author unknown, for
American Machinist.
"Mechanical Development in Cleveland since 1880", author unknown, 1930.
"Tooling Micarta on Turret Lathes" (2 approaches) authors unknown, 1935,
mentions both Warner and Swasey Co. and the Cloyes Gear Works.
"The Beginning and Development of Cleveland's Metal Working
Industries", by EA. SCOTT, President, Cleveland Engineering February 10,
1927,vol.
xix, no. 37.
"The 62' Dome of McDonald Observatory" by E.N. JENNISON, prepared for
Mechanical Engineering 1935; outline, paper correspondence between
WARNER SEELY and The American Society of Mechanical Engineers relating to article and blueprints.
"Turret Lathe Aprons Made Without Jigs" by G.L. KLUTER, as "Turret Lathe
Aprons Machined Without Use of Jigs" for Iron Age, April 25, 1935; and
Photographs.
"Manufacturing Gears for Turret Lathes" by W.J.BURGER, submitted to
Machinery July 17, 1935; "Accurate Gears for Turret Lathes" author
unknown; "Warner & Swasey Gears" author unknown, May 3, 1935.
Selecting the Right Machine for the Right Job (empty).
"Turret lathes on Unusual Materials" by J.R. LONGSTREEf, American
Machinist, April 10, 1935.
"Is Written Off Machinery an Asset or a Liability?" by L.D. MCDONALD,
Assistant Treasurer, Machinery, July 1935, reprint.
Testing Bearings for Turret Lathes - "Spindle Accuracy of .0001", The News
Bureau of Timken Roller Bearing Co., for Iron Age, 1935.
1.9
13
14
15
16
17
18
A-19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
"Accuracy from the Ground Up - correspondence between WARNER SEELY
and American Machinist, 1935, diagram.
"Production of High Grade Castings for Machine Tools" by D.M. GURNEY,
Metallurgist, for Steel. September 9, 1935, reprint; "Alloys Used in Machine
Tools" by D.M. GURNEY, Metal Progress. January 1932.
"How New Machines Saved Us Money" by L.M. MERRILL, American Gas
Accumulator Co., sent to Machinery, October 9, 1934.
"How Much of Our Codes Shall We Keep" by PHILIP E. BLISS, President, nd.
"Obselescence Versus Earnings" by P.E. BLISS, President, nd.
"McDonald Telescope and Observatory - "The McDonald Telescope and
Observatory" by AMBROSE SWASEY, 1934, (not published); "A New
'Eye' for Astronomers" by W. SEELY, Cleveland Trust Magazine, January
and February 1936, vol 17, no. 1 and 2.
"Meeting Increased Production Costs Under NRA, March 7, 1934.
Sales Bulletin - Instruments, June 15, 1934; Sales Bulletin - Telescopes, June
29, August, September 1934; photographs for sales bulletin - telescopes.
Sales Bulletin - Company History - 3 Histories nds.; "The Warner & Swasey
Co., August 2, 1932; Memo, June 5, 1934; Letter and "The Ohio Story" script
(1948); "The Ohio Story -' The Tool Builders"'; by FRANK SIEDEL,
January 19, 1951.
Problems of a Machine Tool Demonstrator - memo to WILLIAM SCOTT from
WARNER SEELY.
"Profits from Depression Purchases" by J.M. SPENCER, Vice President and
General Manager of Hobart Manufacturing Co., American Machinist,
February 13, 1935, reprint; memo of W. SEELY regarding article.
Outlook for Machine Tool Exports - "Machine Tool Exports" by CHARLES J.
STILWELL, Vice President, Iron Age, August 8, 1935.
"Accurate Collets for Turret Lathes" by WILLIAM PELICH, correspondence of
W. SEELY relating to article.
Turret Lathes in Navy Yards - memorandum - J.L. BAYER, Sales Engineering
Dept.; E.R. GARDNER; L.R. HAWKINS, Manager, West Coast Branch; and
W. SEELY, 1935.
Why Purchase Tooling for the Turret Lathe Manufacturer - memorandum DeGRAFF, SEELY, 1935.
"Broader Adaptability Features of New Machine Tool Models' by C.J.
STILLWELL, Vice President, for Automotive Industries, nd.; "Address of
the President" by Ccl. STILLWELL, Vice President, before convention of
the National Machine Tool Builders' Association, May 22, 1935.
"Small Businesses Carry On" by P.E. BLISS, President, September 9, 1934;
galley proof for Nation's Business, October 1934.
Minor Design Refinements - "Improvements of Minor Details is Major Factor in
Machine Tool Developments" by G. HUBBARD, consulting engineer, for
American Machinist, 1936.
34
"Warner & Swasey Company Takes its Own Medicine", author unknown, Iron
Age, May 14, 1938.
35
36
"Cutting Speed Pre-selector" author unknown, n.d.
Cedar Rapids Engineering Co., - "Holding Costs Down By New Equipment" by
RH. MEISTER, American Machinist, nd.
"Modem Astronomy Relies on the Machine Shop" by CHARLES O. HERB,
Machinery, December 1935, vol. 42, no. 4.
"Machine Tools - Old or New" by C.S. STILLWELL, Vice President, Mill and
Factory, February 1936 reprint.
Training Skilled Men, Learners, Special Learners, Apprentices, - article by W.
SEELY, 1936.
Spindle Article - "Design and Manufacture of Spindles for High Powered Turret
Lathes" by W,J. BURGER, Works Manager, nd.; blueprints.
Aids Accuracy in Machine Tools - memorandum - H.W. FORTEY, Director of
Advertising, and E. BREMMER, Abrasive Industry, to W. SEELY, 1936.
How Will Higher Taxes be Met? - "Where Will We Get the Money to Pay
Higher Taxes?" by CJ. STILLWELL, Vice President, American Business,
August 1936.
Turret Lathes used as Jig Borers - correspondence of L.R HAWKINS and W.
SEELY, 1936; blueprints.
McDonald Telescope - article for Wellman Magazine, 1936.
" Getting the Most from Your Turret Lathes" by W. SEELY, American
Machinist, December 19, 1934.
"The Optical System of the 80 Inch Reflecting Telescope for McDonald
Observatory" by W. SEELY, Popular Astronomy, December 1933.
Motor Selection for Turret Lathes - I -letter regarding article by J.R
LONGSTREET, in American Machinist, n. d.
Redesigning the Turret Lathes for Cemented Carbide Tools (empty).
"Keeping the Employee Sold", by P.E. BLISS, President, Nation's Business,
September 1936.
"Welded Vs. Cast Iron Jigs" by L.R HAWKINS, Manager, West Coast Branch,
for Western Machinery and Steel World, nd.
High Test Alloy Cast Iron for Machine Tools - correspondence relating to article
by FJ. DOST.
"Holders for Carbide Cutting Tools" by J.R LONGSTREET, Machinery,
September 1936.
"The New Approach in Machine Tool Merchandising" by CLIFFORD S.
STILLWELL, Vice President and Sales Manager, Industrial Marketing,
September 1936.
"Current Trends in Europe" by CJ. STILWELL, Vice President, Export Trade
and Shipper; correspondence relating to article.
37
38
39
40
41
42
43
44
45
45a
46
47
48
49
50
51
52
53
54
55
"Taxpaying Machinery" by L.D. McDONALD, Assistant Treasurer, Banking,
November 1936.
~1
56
"Keeping Costs Down In 1937" by E.S. STILWELL, Vice President and Sales
Sales Manager, 1936.
57
"Labor Supply and Apprenticeship" by W. SEELY, Secretary, speech before the
Labor Relations Group, National Industrial Council, December 7, 1936.
58
59
60
61
62
63
64
65
66
67
68
69
A-70
71
72
73
74
75
76
77
"The Export Outlook for Machine Tools" by C.J. STILWELL, Vice President,
for American Machinist, 1936.
"Modern Lighting - Worker Efficiency" by W. SEELY, Secretary, several
Industrial Magazines, June 1937; "Good Lighting Betters Worker Efficiency"
By W. SEELY, Secretary, nd.
"When is a Machine too Old?" by M.E. LANGE, Engineer, nd.; notes for
address "When is a Machine too Old?" before Management Group of the
Chamber of Commerce of Rochester, New York., December 7, 1936.
"When is a Machine too Old?" by C.S. STILWELL, Vice President, La
Machine Moderne, Paris, January 1, 1937.
Heating Treating of Machine Tool Parts - "Heat-Treating to Sustain Tool
Accuracy" by D.M. GURNEY, Mettalurgist, nd.
"Learner" Training S stem Produces Machine Operatives in Sixty Days correspondence regarding interview of C.J. STILWELL, Vice President and
E.c. KREUTZBERG, Development Manager of Steel, 1937.
"Building Accuracy into Turret Lathes", author unknown, Machinery, July,
1937.
Better Appearance Inspires Better Machine Production, article by G.B.
CARSO, nd.; photograph.
Self-Aligning Coupling, article for Warner & Swasey Co., for several industrial
magazines, 1937, blueprints.
"Looking at the Stars", author unknown, Oil Power, July 1937, vol. xii, no. 7.
Depreciation Reserves, - "Depreciation Reserve Policies", author unknown, nd.
"Special Equipment Features Materials Handling in Machine Tool Plant",
author unknown, Steel, March 1937; correspondence between W. SEELY,
Secretary, and Steel, relating to article.
Nathan Manufacturing Co. - article for American Machinist, nd.; blueprint.
"New Attachment Revolutionizes Turret Lathe Operation" (pre-selector) by
M.E. LANGE, Engineer, nd.
Apprentice Article - correspondence between W. SEELY, Secretary, and
Western Machinery and Steel World, relating to apprentice article, 1937.
Article for Advertising and Selling - outline for article for Advertising and
Selling, 1937.
"The Need for More Machine Tools" by P.E. BLISS, President, 1937.
Coordinating Sales with Production - Letter relating to C.S. STILWELL's
article for Steel "Are Sales Managers Getting What They Need in Product and
Production?", 1937.
"Design to Fit Operator" by W. SEELY, Secretary, Machine Design,
November 1937.
1?
78
"Wanted -Trained Men" by W. SEELY, Secretary, for several industrial
Magazines, February 1937.
79
"Training Learners for Production Operations" by W. SEELY, Secretary,
Machinery, December 1937; "Putting Learners into Production" by W.
SEELY, Secretary, nd.
"Industry Needs Skilled Help" - correspondence regarding article.
Survey of Employment - April and May 1937.
"Centralized Tool room Eliminates Tool Crib Troubles" by FRED L. PRENTIS,
Editor of Iron Age, September 9, 1937.
"Fitting Men for Industry" by C.J. STILWELL, Vice President, Executive
Services Bulletin, March 1938, vol. xvi, no.3.
"Large Chips -letters relating to production of big chips, 1937.
Comment on Machine Tool Industry - by P.E. BLISS, President, October, 1937,
not published.
"Machining Turret Lathe Beds" by GEORGE L. KLUTER, Production
Engineer, American Machinist, 1938.
"Sight Saving Light is Installed as Essential Part of Lathe Manufacture" by S.W.
WATKINS, Electrical Enaineer, Electrical Production, December 1937.
Machine Shop Lighting - letter from Iron Aae regarding article.
Power Distribution - correspondence relating to article.
Decentralization - correspondence relating to article.
The Place of Advertising in the Machine Tool Industry - correspondence
"What Price Slow Down?" author unknown, 1937.
Questionnaire (Obselescence) - "A 'Sampling Method' Survey of Machine
Tool Equipment" by P.E. BLISS, President, American Machinist, April 20,
1938, reprint.
"Maintenance Operations on Turret Lathes" by W.K. BAILEY, Service
Manager, Modem Machine Shop, December 1938, reprint.
W&S Advertising Campaign, 1937 - letter relating to.
"To Buy or Not to Buy" by C.S. STILWELL, Vice President and Sales
Manager, Steel, January 31,1938, reprint.
Machining and Finishing Jigs and Tools -letter relating to proposed article.
"Leading - on Attachment for Hexagon Turret Announced by Warner &
Swasey", for various industrial magazines, March 1938.
"New Tools Increase Turret Lathe Productivity" by W.K. BAILEY, Manager
Tool Division, nd.; memo and questionnaire on publicity and sales.
"New Tools Make Carbide Cutters Available to Small Shops" by JAMES P.
LONGSTREET, Development Engineer; letters regarding article in
Machinery, 1938.
"Calculator Short-Cuts Figuring of New Equipment Savings" author unknown,
nd.
Modem Machine Shop - Case Histories - correspondence relating to article in
Modem Machine Shop, 1935.
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
A-99
100
101
102
103
104
Rebuilding Article - Iron Age - "Fixed Price Rebuilding Aids Employees and
Customers", article for Iron Age, killed, April 1939.
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
"Planning and Employees' Hobby Show" by JOHN e. KLINE, Supervisor of
Purchases, Factory Management and Maintenance, nd.
"The Cost of Apprenticeship" by W. SEELY, Secretary, Mechanical
Engineering. December 1938; The Clevelander, January 1939; and
Ponder, March 1939.
Wanted - Steady Work - correspondence relating to proposed article for Steel,
December 1938.
"The Place of the Turret Lathe in the Tool Room" by C.S. STILWELL, Vice
President, April 28, 1938.
"Re-wired for Profit" by S. WATKINS, Electrical Engineer, Factory
Management and Maintenance, August 1939.
"Ask the Man Who Runs One" by P.E. BLISS, President, Iron Age, April 13,
1939.
"Getting More From Your Turning Equipment" by W.e. DeGRAFF, nd.
"Making Better Machine Tool Catings" by F.J. DOST, Superintendent,
Sterling Foundry Co., Mechanical Engineering, May 19, 1940;
Correspondence relating to article.
"Machine Tool Industry Under Full Steam" by e.J. STILWELL, President,
The Clevelander, September 1939.
"Carbides Work on Small Lots" by W.J. BURGER, Works Manager, nd.;
correspondence relating to article.
"What of the Future?" by e.S. STILWELL, Executive Vice President, nd.
"Standard Tool are Breaking Production Bottlenecks" by W.J. BURGER,
Works Manager, Machinery, February 1940; letters relating to article.
"Modern Gaging Problems" by NELS SWENSON, Superintendent, Iron Age,
March 28, 1940; " Measuring Our Gage Practices" by NELS SWENSON,
Superintendent, nd.
"How to Hold the Work" by J.R. LONGSTREET and W.K. BAILEY,
American Machinist, March 6, 1940.
"Chucks and Holding Fixtures" by J.R. LONGSTREET and W.K. BAILEY,
"Varied Set-ups with Standard Tools" by J.R. LONGSTREET and W.K.
BAILEY, American Machinist, April 3, 1940.
"New Right-of-Way for Cleveland" by C.J. STILWELL, President, The
Clevelander, April 1940.
"Manufacturing and National Defense" by C.J. STILWELL, President,
~4
A-130
131
132
133
134
135
136
137
address before the American Society of Mechanical Engineers, April 25,
1940; letters relating to address.
"Typical Bar Stock Set-ups" by J.R. LONGSTREET and W.K. BAILEY,
American Machinist, May 1, 1940.
"Equipment for Chucking" by J.R. LONGSTREET and W.K. BAILEY,
American Machinist, May 1, 1940.
"Adapting Training Courses to Meet the Present Special Needs" by L.D.
McDONALD, Vice President, address before the Personnel Conference
of the American Management Assoc., February 16, 1940; letters relating
to address.
"Vocational Education as the Business Man Sees It" by W. SEELY,
Secretary, The Ohio Vocational Association News, June 1940, vol. iv,
no. 3; correspondence relating to article.
"Let's Nurture the Machine - and Reduce Technological Unemployment!"
by Csl. STILWELL, President, Iron A~e, June 20, 1940; letters relating to
article.
"Training People to be Skilled Workers" by W. SEELY, Secretary. Address
before the Sectional Meeting of the Silver Bay Industrial Conference, July
25, 1940; correspondence relating to Conference.
"How to Control and Plan Production" by G.V. BLACK, Production
Manager, Iron A~e, July 11,1940; letters relating to article.
138
139
140
141
142
143
144
145
146
147
148
"A Coordinated Training Program that has Produced Results"correspondence relating to article, 1940.
"Increasing Productive Capacity through Trained Personnel" by C.S.
STILWELL, Executive Vice President, Executive Service Bulletin,
August 1940, vol. xviii, no. 8.
"How Big a Job is National Defense?" By Csl. STILWELL, President, Iron
A~e, October 24, 1940.
"Selling the Man in the Plane" by HARRY W. FORTEY, Director of
Advertising, Paper Pro~ress, October 1940.
"Industrial Requirements in Tool Engineering Education" by C.S.
STILWELL, Executive Vice President, Address before the American
Society of Tool Engineers, March 8,1940.
''The Problem of the Supply of Labor" by C.S. STILWELL, Executive Vice
President, address before the National Association of Manufacturers,
December 12, 1940; correspondence relating to conference.
"We Show Customers' Operators How" by C.S. STILWELL, Executive Vice
President, Factory Mana~ement and Maintenance, January 1941, vol. 99,
no.1; Blue Chips, magazine of Warner and Swasey Co., vol. 4, nos. 7-10.
"This War for America is Being Fought at the Lathe" by C.S. STILWELL,
Executive Vice President, The Clevelander, January 1941.
"The Warner & Swasey Learner Training Program" by RAY J. BLYTH,
Personnel Director, Address before the American Management
149
150
151
152
A-153
154
155
156
157
158
Association, Production Conference, November 13, 1940.
"Man Hour Output is Increased Without Fatigue to Operator" by C.S.
STILWELL, President, Steel, January 6, 1941.
"Can't Use Carbides?" by W.J. BURGER, Director of Engineering,
"Light and Defense Production" by SIDNEY W. WATKINS, Electrical
Engineer, Electrical Production, April 1941.
"Defense Is a Race Against Time" by C.J. STILWELL, President, The
Cleveland Trust Ma~azine, March-April, 1941, vol. 22, nos. 3-4 letters
"Maintenance Goes On Day and Night" by S.W. WATKINS, Electrical
Maintenance Department, Factory Mana~ement and Maintenance, May,
1941, vol. 99, no. 5.
"Producing Skilled Workers by Short Term Training" by W. SEELY,
Secretary, various Chamber of Commerce magazines, 1941.
"Make Machine Tools Work Harder!" by c.r. STILWELL, President, The
Clevelander, June 1941; letters relating to article.
"Short-Term Training at Warner & Swasey," by RAY J. BLYTH, Personnel
Director, Iron A~e, July 10, 1941.
"All-Welded Telescope Aluminizing Cell" by THOMAS C. WRIGHT,
Designer, The Weldin~ En~ineer, August 1941.
159
160
161
162
163
164
165
166
"Plenty to Advertise" by W.K. BAILEY, Sales Manager, Address before the
Direct Mail Advertising Association, October 8, 1941.
"Lubrication Keeps Production Rolling" by NELS SWENSON, General
Superintendent, American Machinist, November 12, 1941.
"Labor Relations Today" by Ccl. STILWELL, President, Address before the
Labor Relations Forum of the Ohio Chamber of Commerce, November,
1941.
"Oiling by Schedule Keeps Our Machines Running" by NELS SWENSON,
General Superintendent, Factory Mana~ement and Maintenance,
November 1941, voL 99, no. 11.
"Applying Salesmanship to Labor" by C.J. STILWELL, President, The
Clevelander, December 1941.
"Special Turret Lathe Tooling Speeds Up Defense Production" by T.J. HUDSON, Chief Tool Designer, Machinery, January 1942; letters relating to
article.
167
168
169
170
"What are Machine-tool Salesmen Doing These Days?" by W.K. BAILEY,
Vice President in Charge of Sales, Executive Service Bulletin, May, 1942,
voL xx, no. 5; letter relating to article.
"Vestibule School for Greater War Production" by W. SEELY, Secretary,
171
172
173
174
175
176
177
178
179
180
181
A-182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
Iron Age, September 10, 1942; material relating to vestibule school.
"Standard Tools Speed Conversion" by D.M. PATTISON, Sales Manager,
nd.; Letters relating to article; photographs for article.
Spindles Drilled Faster - " using Turret Lathes for Deep Hole Drilling/ Trebles
Production" by DAVID H. SAMUELSON, Lubrication Engineer, nd.
"Carbides Vs. High Speed Steel- Some Recent Developments" by H.A.
OLDENKAMP and JAMES McFAYDEN, presented to the American
Society of Mechanical Engineers, 1942.
"Replacing Cast-Iron Guard with One of Sheet Steel" by H.A. OLDENKAMP,
Welding Consultant, Machinery, January 1943.
"Using Available Machine Tool Equipment to Best Advantage" by W.K.
BAILEY, Vice President, Machinery, February 1943; letters relating to
article.
"Scheduling and Allocating Manpower" by WALTER C. MASON, Assistant
Employment Manager, address before American Management Association
Conference on Manpower Utilization, February, 12, 1943.
"Recent Developments in Carbide Vs. High Speed Steel" by H.A. OLDENCAMP and JAMES McFAYDEN, Mechanical Engineering, April 1943.
"Suggestion Systems Can Be Prepped Up!" by R.S. FROWNFELTER, 1942;
letters relating to article.
Mechanical Design Facilities Observations, E.P. BURRELL, (empty).
"What Price Depreciation?" by L.D. McDONALD, Rand McNally Bankers
Monthly, November 1935.
"The Split-Shift Plan" by E.W. GRESSLE, address before the Silver Bay
Industrial Conference, July 30, 1943.
"Advertising Spreads Practical Ideas for Relieving Chokes in Production" by
D.M. PATTISON, Sales Manager, Sales Management, August 1, 1943;
letters relating to article.
"Industry's Problems Ahead" by C.J. STILWELL, President, talk at the First
Baptist Church, November 17,1943; letters relating to talk; other speeches
Concerning church and industry, not related to Warner & Swasey.
17
198
199
200
201
202
203
204
205
206
207
208
209
210
211
A-212
213
213a
214
215
216
217
218
"You Can Train Learners in Four Weeks" by W. SEELY Secretary, Trained
Men, September-October, 1943, no. 5; letters relating to article; material
relating to vestibule schools.
"Conversion of a Machine Tool Plant" by W.K. BAILEY, Vice President,
American Machinist, November 25, 1943.
Untitled Address by P.E. BLISS, President, address before a sales convention,
January 27, 1934.
"Cleveland Makes It," radio program on WHK with c.J. STILWELL,
President and E.W. GRESSLE, February 18, 1940.
"Defense for America", National Association of Manufacturers radio broadcast
on Machine Tool Industry with F. CASTLE, Machinist, February 22, 1941.
War Situation - radio talk for CJ. STILWELL, President, December 16, 1941.
"Production for War" by CJ. STILWELL, President, address before the
Denison Alumni Association, Cleveland Chapter, February 20, 1942.
Untitled Address, by c.J. STILWELL, President, given at the Graduation of
Auxiliary Firemen, September 11, 1942.
"Machine Tool Maker's Dilemma", article on Warner & Swasey Co., Fortune
Magazine, October 1942; correspondence relating to article; photographs
and negatives.
"A Machine Tool Builder Makes Navy Diesel Engine Cases" by G.L.
KLUTER, Works Manager, Iron Age, March 2, 1944; letters relating to article.
"New Questions on Sales and Service" by W.K. BAILEY, Vice President, address
before National Machine Tool Builders' Association, May 9, 1944.
"Report of the Committee on Electrical Problems" by R.H. CLARK, Electrical
Engineer, address before National Machine Tool Builders' Association, May
9, 1944.
Untitled Address by CJ STILWELL, President, presented before The
Manufacturers Club (affiliated with The Mansfield Chamber of Commerce)
rough draft, March 31, 1944.
"Our Dwindling Natural Resources - What Shall We Do About Them?" by W.
SEELY, Secretary, paper presented before Philosophical Club of Cleveland,
November, 1944; used as basis for talk, same title, before St. James Episcopal
Church, Painesville, October 1951.
"Briquetting 'Swarf' at Warner & Swasey" by G.W. BIRDSALL, Associate
Editor of Steel, September 18, 1944.
"Why Better Standards Mean Better Machines" by R.H. CLARK, Electrical
Engineer, Electrical Manufacturing, October 1944.
"What to Do With Postwar Excess Plant Capacity" by L.D. McDONALD, Vice
President, Iron Age, November 23, 1944.
"How One Plant Organized Electrical Maintenance" by S.W. WATKINS, Superintendent of Power, Factory Management and Maintenance, November, 1944.
219
220
221
222
"Limitations of Epicyclic Gearing for Variable Speed Drives" by J.P. ALLEN,
Experimental Engineer, Product Engineering, October 1944; diagrams 1-7.
"Novel Tooling Developed to Machine Diesel Cylinder Blocks" author unknown,
American Machinist, October 12, 1944; photographs.
"New Selling Problems" by W.K. BAILEY, Vice President, address before
National Machine Tool Builders' Association, October 20, 1944.
223
224
"Savings Effected by Improved Tip Design" by J.F. ALLEN, Experimental
Engineer, Production Engineering and Management, June 1945, vol. xv
no. 6.
225
226
227
228
229
230
231
232
233
234
235
236
237
A-238
239
240
241
242
243
"Indicated Principles of Postwar Machinery" by CARL HIMMELRIGHT, Project
Engineer, paper presented before American Society of Mechanical Engineers,
November 29, 1944; as article in Mechanical Engineering, July 1945.
"Production Work On Jig Borers" by CARL HIMMELRIGHT, Project Engineer,
Iron Age, August 23, 1945; letters relating to article.
"Broaching Hardened Involute Splines" by CARL HIMMELRIGHT, Project
Engineer, Iron Age, August 30, 1945.
"Selection and Use of Diamond Tools" by EDWARD L. MURRAY, Iron Age,
August 30, 1945.
"The 'Lost Art' of Small-Lot Production" by D.M. PATIlSON, Sales Manager,
Iron Age, September 27, 1945.
"The Whole of Heating Economics is the Sum of all its Parts" by HARRY
NOBIS, nd.
"Single-Point Turning Research" by J.P. ALLEN, Project Engineer, Iron Age,
January 10 and 17, 1946.
"Standardization of Electrical Equipment for Machine Tools" by R.H. CLARK,
Electrical Engineer, Machinery, January 1946.
"The Recent Revision of the Machine Tool Electrical Standards" by R.H.
CLARK, Electrical Engineer, Electrical Manufacturing, January 1946.
"The Warner and Swasey Observatory of The Case School of Applied Science",
By J.1. NASSAU, Publications of the Astronomical Society of the Pacific,
December 1945, vol. 57, no. 339.
"The Economics of Future Machine Tool Design" by MYRON CURTIS,
presented before American Society of Tool Engineers, Rochester Chapter,
December 12, 1945.
"Precision Threading" by H.M. WORSTELL, Field Engineer, Engineering
Experiment Station News, February 1946.
"Ohio Industrial Biography 17. The Warner and Swasey Company". Author
unknown, Engineering Experiment Station News, February 1946.
"Chromium-Plated Tools Have Longer Life" by ANDREW A. SPISAK, Project
244
245
246
246a
247
248
249
250
251
252
253
254
255
256
Engineer, American Machinist, February 28, 1946, photographs.
"Machine Tools as a Brake on Inflation" by Czl. STILWELL, President, address
before Cleveland Engineering Society, May 7, 1946.
"Machines That Make Machines", author unknown, Nickel Cast Iron News, 2nd
quarter, 1946, vol. 17 no. 2.
Untitled Address by c.J. STILWELL, President, presented before Old Timer's
Club, May 15, 1946.
"Welded Design As Applied to Light-Weight Army and Navy Structures" by
H.A. OLDENKAMP, Weldin~ Journal, January 1946, letters relating to article.
"A Neighborhood Conservation Project" by W.K. BAILEY, Vice President, The
Clevelander, July 1946.
"The Machine Tool Outlook" by C,J. STILWELL, President, The Clevelander,
October 1946.
"The Much-Discussed Production" by C,J. STILWELL, President, address before
SAE National Production Meeting, October 14, 1946.
"Exploring Carbide Possibilities in Single Point Turning" by J.E ALLEN, The
Tool Eneineer, September 1946.
"What Price Payroll Deduction?" by DON KNOWLTON, November 1945.
"Corporate Thinking as Industrial Cafeterias" by W. SEELY, Secretary, address
before Conference on Restaurant Management: November 12, 1945. Untitled
address by J.M. CALLAHAN before same conference.
Untitled Radio Address by C,J. STILWELL, President; for WGAR, June 23,
1946, "An Incident for Dramatization", idea for a radio script for June 23.
"Ambrose Swasey - In Tribute" by C,J. STILWELL, President; address before
Founders' Day Convocation at Denision University (with special recognition
of the One Hundredth Anniversary of the birth of Ambrose Swasey, 18461937). December 11, 1946.
257
257a
"Maintenance Costs as a Replacement Index" by D.M. PATTISON, Sales
Manager, draft of article, August 26, 1946.
257b
"Can Durable Goods Industries Achieve Steadier Employment?" by C.J.
STILWELL, President, second draft of article, September 6, 1946.
Untitled Memo by C,J. STILWELL, President, as article for the New York
258
Journal of Commerce, December 14, 1946. (appeared as "Warner and Swasey
Diversifies Its Line").
A-259
Untitled Article by C.J. STILWELL, President, Steel, written November 26,
1946.
(appeared as "Doubled Capacity of Plant Inspires Diversification").
"Electrical Control of Astronomical Telescopes" by ERNEST JENNISON,
260
Telescope Designer, Cleveland Engineering, February 6, 1947, vol. XL, no. 6.
"Dollars are no Answer" by C,J. STILWELL, President, address before the
261
Industrial Executive Club, February 5, 1947.
"Wages and Prices - Looking Behind the Figures" by C,J. STILWELL, President,
262
40
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
A-280
281
address before National Association of Costs Accountants, C Cleveland Chapter, April, 12, 1947.
"Some Present Day Economic Fallacies" by W.K. BAILEY, address before
Cleveland Engineering Society, May 13, 1947.
"Small Communities - Their Importance in the Business World" by C.J. STILWELL, President, address before the Wellington Kiwanis Club, July 10, 1947.
"For Sale - Greater Output per Dollar" by L.D. McDONALD, Vice President,
Iron Age, August 21, 1947.
"40 Years of Machine Tool Shows" by C.J. STILWELL, President, statement released to Iron Age, published September 11, 1947.
"Turning Points in the Metalworking Industry" by MYRON S. CURTIS, Assistant
Director of Engineering, address before joint session of American Society of
Tool Engineers and American Foundrymen's Association, September 19, 1947.
Untitled Memo by J.R McLAIN, General Superintendent, machine tool maintenance, nd.
"How We Use Case Histories in Direct Mail" by J.E. CRAIG, Manager Advertising Department, address before The Direct Mail Advertising Association,
October 25, 1947. "Prove Results - and Improve Sales" by J.E. CRAIG, article
in Industrial Marketing, November 1947 - based on address of October 25,
1947, 17 photographs used in both.
"Highlights of the Machine Tool Show" attributed to MYRON S. CURTIS,
address before Cleveland Engineering Society, November 3, 1947.
"What About It?" by W. SEELY, address before Cleveland Hardware Foreman,
November 20, 1947.
"Management's Educational Responsibility" by C.J. STILWELL, President,
Address before The New England Council, November 21, 1947.
"Electrification Increases Productivity of Small Turret Lathes" by RH. CLARK,
Electrical Engineer, September 1, 1947.
"Management Leadership in Employee-Employer Relations" by C.J. STILWELL,
President, address before the Labor Relations Session of the National
Association of Manufacturers, December 4, 1947.
"Some of Our Present Economic Fallacies and Practices" by W.K. BAILEY, address before Cleveland Personnel Association, December 9, 1947.
"Redesign of Welded Structures to Reduce Costs and Improve Performance" by
H.A. OLDENKAMP, nd.
"Simplified Dimensioning System" by NORMAN W. TAYLOR, Design
Engineer, Machine Design, February 1948.
"What an Executive Expects From the Accountant" by L.D. MCDONALD, Vice
President, address before National Association of Cost A Accountants, Cleveland Chapter, February 19, 1948, excerpts from address in N.A.C.A Bulletin,
May 1, 1948, vol. XXIX, no. 17.
Untitled address by W.K. BAILEY, before Foreman's Club, February 12, 1948.
"High-Speed Cycling" by RH. CLARK, Electrical engineer, Machine Design,
April 1948.
41
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
"Extension of Pin Control in Worsted type Yam Processing" by J.R. LONGSTREET, paper before American Association of Textile Technologists, June
2, 1948, same as article in Papers of the American Association of Textile
Technologist, September 1948; "Pin Control in Worsted Spinning" author
unknown; American Wool and Cotton Reporter, relating to LONGSTREET artticle, June 24,1948.
"The Warner & Swasey Sulzer Weaving Machine" by M.S. CURTIS, Assistant
Director of Engineering, June 3, 1948.
"Saves 90% in Cost of Hardening Iron" by S. WATKINS, Electrical Maintenance
Engineer, for Electrical Production, June 1948.
"The Warner & Swasey Sulzer Weaving Machine" by M.S. CURTIS, Assistant
Director of Engineering, June 3, 1948; "Warner & Swasey's New Weaving
Machine" by M.S. CURTIS, Assistant Director of Engineering, Canadian
Textile Journal, July 23, 1948.
"Wealth, Production, and Machine Tools" by M.S. CURTIS, address before the
American Society of Tool Engineers, September 7, 1948.
"Untitled radio broadcast, with W. SEELY," Secretary, relating to The Warner
Oriental Art Collection on the Cleveland Museum of Art, WTAM, September
11,1948.
"Single Spindle Automatic Chucking Machine" by RALPH SCHUMAN,
submitted to Electrical Manufacturing contest, July, 1948; "Single Spindle
Automatic" by R. SCHUMAN, Electrical Engineer, Electrical Manufacturing,
product, design award winner, October 1948, photographs and blueprints of
figures 1-9.
"Alloy Steel in the Turret Lathe" by D.M. GURNEY, Metallurgist, Metal
Progress, October 1948.
"Cleaner Skies and Better Health" attributed to W. SEELY, nd.
Letter by W.K. BAILEY, Vice President, to American Society of Tool Engineers,
Cleveland Chapter relating to college scholarships, October 13, 1948.
"The Warner & Swasey Sulzer Weaving Machine" by M.S. CURTIS, Director of
Engineering, address before American Society of Mechanical Engineers,
December 3, 1948.
"Machine Design As a Profession" by M.S. CURTIS, Director Engineering, talk
given to Engineering Students of University of Pittsburgh, December 2, 1948.
"Redesign Effects Economies in Production Weaving Machine" by WALTER A.
HOFMANN, Project Engineer, for Machine Design, nd.
"Tapped Holes for Cap Screws" by D.S. STONEMAN, Engineer, written for
Fasteners, nd., figures 1-4.
"Turret Lathe Practice" by EDWARD L. MURRAY, Screw Machine Engineering,
January 1949.
"Turret Lathe Practice" by EDWARD L. MURRAY, Screw Machine Engineering,
February 1949; "How to Get Better Results on Turret Lathes" by EDWARD
L. MURRAY, draft of article, November 22, 1948.
"Power Considerations Related to Motor Selection for the Turret Lathe" by
EDWARD L. MURRAY- draft of article for Screw Machine Engineering,
41.
300
A-301
302
303
304
304a
304b
305
306
307
308
309
310
311
312
313
314
315
316
March 1949; December 1948.
"Cutting Operations on the Turret Lathe" by EDWARD L. MURRA Y, draft for
article for Screw Machine En~ineerin~, April 1949; January 1949.
"Cutting Operations in the Turret Lathe" by EDWARD L. MURRAY, draft of
article for Screw Machine En~ineering, May 1949; January 1949.
"Wealth, Production and Machine Tools" by M.S. CURTIS, Director of
Engineering, address before the American Society of Tool Engineers, WilliamSport Chapter, May 9, 1949.
"Turret Lathe Practice - Contour Machining" by E.L. MURRA Y, draft of article
for Screw Machine Engineering, June 1949, nd.
Untitled article by C.J. STILWELL, President, draft of article for New York
Journal of Commerce - "Year End" Issue, January 1948, and January 1949.
"Handling Time Vs. Machining Time" by E.L. MURRAY, Engineer, paper presented before American Society of Mechanical Engineers, September 29, 1949.
"Machine Tool Selection In the Turning Field" by E.L. MURRAY, The Tool
Engineer, June 1949.
"How to Hire Effectively" by JAMES M. CALLAHAN, International Steward,
July 1949.
"Turret Lathe Practice" by E.L. MURRAY, Screw Machine Engineering, July
1949, draft of article, nd.
"Turret Lathe Practice" by E.L. MURRA Y, draft of article for Screw Machine
Engineering, August 1949, nd.
"Control of Air Pollution Control" by W. SEELY, Secretary, draft of article, nd.
"Turret Lathe Practices" by E.L. MURRAY, draft of article for Screw Machine
Engineering, September 1949, nd.
"Turret Lathe Practice" by E.L. MURRAY, Screw Machine Engineering,
October 1949, draft of article, nd.
"Economical Production of Short Run Jobs" by WILLIAM OREBAUGH, Screw
Machine Engineering, October 1949, draft of article, nd.
"Turret Lathe Practice" by E.L. MURRAY, draft of article for Screw Machine
Engineering, November 1949, nd.
"Machine Tools Provide the Competitive Edge Which Protects Your Profits" by
L.D. McDONALD, Vice President, American Machinist, November 17,1949.
"The Tools of Freedom" by L.D. McDONALD, Vice President, Production
En~ineering Management, November 1949.
"Psychology Plays Important Part in Design of 'Machine Handling' Controls"
E.L. MURRA Y, Engineer; Production Engineering Management, November
1949.
317
318
"The Textile Industry Today Requires the Engineering Approach" by J. LONGSTREET, address before American Society of Mechanical Engineers, December2,1949.
319
"Handling Time Vs. Machining Time" by E.L. MURRAY, Engineer, address
before American Society of Mechanical Engineers, September 1949.
320
321
A-321a
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
"Turret Lathe Practice" by EL. MURRAY, draft of article for Screw Machine
Engineering, January 1950, nd.
"Applying Carbide Tools to Every Day Operations" by JAMES McFAYDEN,
Cutting Tool Supervisor, draft of article for Tool & Die Journal, nd. (1949).
"Multiple Tooling" and "Small Lot Production on Automatics" attributed to E.L.
MURRAY, drafts of article for Screw Machine Engineering, 1950, nd.
"More Precise Methods Needed by Textile Industry" by J.R LONGSTREET,
Textile Division, draft of article for Journal of Commerce, January 1939, nd;
"Precise Methods Held Vital Need in Textile Field" by r.s, LONGSTREET,
Journal of Commerce, January 30, 1950.
Engineering, February 1950, nd.
"The Effect of Mechanization Upon Society" by C.J. STILWELL, President,
address before Cleveland Engineering Society, February 1, 1950.
Engineering, March 1950, nd.
"Recent Trends in Turning and Boring" by G.L. KLUTER, Works Engineer, draft
of article for The Tool Engineer, February 7, 1950.
"Automatic or Hand-Operated?" by D.M. PATIlSON, Vice President in Charge
of Sales, Machinery, May 1950.
Engineering, May 1950, nd.
Engineering, June 1950, nd.
"Comprehensive Analysis of Motor Performance on Turret Lathe Duty Cycle" by
RH. SCHUMAN, paper presented before American Society of Mechanical
Engineers, June 1950.
Engineering, July 1950, nd.
"New Vocations for After- 50 Workers" by EDWARD W. GLESSLE, Manager,
Industrial Relations, The Clevelander, July 1950.
Engineering, August 1950, June 8, 1950.
"Turret Lathe Practice - Concentric Thin-Walled Die Castings Machined on
Turret Lathes" by E.L. MURRAY, draft of article for Screw Machine
Engineering, September 1950, nd.
"How to Get the Most Out of Turret Lathes" by EL. MURRAY, American
Machinist, October 2, 1950, draft of article, nd.
Engineering, October 1950, nd.
"Student talks by M.S. CURTIS, Director of Engineering, at Michigan College of
Mining and Technology, October 17, 1950.
"Redesign for More Economical Manufacture" by JAMES WILLIAMS, Equipment Engineer, Machine Design, November 1950.
"Turret Lathe Practice - Rough Machinery, Assembling Finishing Machining
44
..all in 1 set up" by EL. MURRAY, draft of article for Screw Machine
November 1950, nd.
"Production for Freedom" by M.S. CURTIS, Director of Engineering, address
before American Society of Tool Engineers, November 1,1950.
"Modern Machinery and Its Relation to Fiber Blending" by HARVEY
BALSOM, address before Textile Society of Canada, November 24, 1950.
"Application of Automatics to Small Lot Production" by M.S. CURTIS,
Director of Engineering, address before American Society of Mechanical
Engineers, November 27, 1950, correspondence relating to address.
"Hints from the Warner & Swasey Carbide Department" by EL. MURRAY,
Draft of article for Screw Machine Engineering, December 1950, nd.
(appeared as "Standardization of Carbide Tools).
"Machining of Heated Metals" by ARMSTRONG, COSLER, AND KATZ,
Battelle Memorial Institute, Transaction of the American Society of
Mechanical Engineers, 1950.
"Economical Short-Run Production of Elevator Parts" by J.1. HOGAN, Manager,
Process Division, Ohio Elevator Company, Machinery, July 1950, vol. 56,
no. 11.
"Organized Replacement Steadily Increases Plant Productivity" by MILES J.
ROWAN, Associate Editor, American Machinist; American Machinist
August 21, 1950.
"Better Equipment Replacement" by JOHN S. MORGAN, Associate Editor,
Steel; Steel, April 21, 1950.
"Multiple-Spindle Bar Machines" by M.1. ROWAN, Associate Editor, American
Machinist; American Machinist, 1950.
"Ambrose Swasey and the Great Liek Telescope" by KATHERINE SCOTT
RIDLEY, a radio program for The Ohio Story, 1950; (not used), letters
relating to script.
En~ineering,
341
342
343
A-344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
Engineering, April 1951, nd.
"Maintenance of Electrical Equipment" by S.W. WATKINS, Superintendent of
Power, address before Plant Maintenance Conference, January 1951.
"Pin Drafter" by CRAIG R. SMITH, Textile Division, Textile Forum, February,
1951; draft of article, January 26, 1951.
"High Speed Machines and Special Design Problems with Reference to the
Revolutionary Warner & Swasey Sulzer Weaving Machine" by RICHARD
DENTON, Project Engineer, address before Machine Design Conference of
Cleveland Engineering Society, February 5, 1951; "The New Weaving
Machine" by R. DENTON, Project Engineer, Cleveland En~ineering, March
1, 1951.
"Warner & Swasey's Pacific Converter, Pin Drifters & Modern Weaving Machines" by H.P. BALSOM, Textile Division, Canadian Textile Journal, March
2,1951.
"Conservation of Materials and Manpower" by M.S. CURTIS, Director of Engi-
4';
359
360
361
362
363
364
neering, address before Machine Tool Electrification Forum (Westinghouse
Forum), April 11, 1951.
Remarks on Machine Tool Industry by CJ. STILWELL, President, before Federal Reserve Bank, April, 1951.
"The Warner and Swasey - Sulzer Weaving Machine" by ROBERT
WHEWELL, Textile Engineer, address before Weavers and Dressers Guild,
May 18, 1951; address before Textile Associates Club, November 17, 1951.
"Improved Components Highlight New Gradall Design" by S.P. WINCHELL,
Chief Engineer, Applied Hydraulics, September 1951.
"Our Dwindling Natural Resources - What Shall We Do About Them?" by W.
SEELY, Secretary, address before Men's Group of St. James Episcopal
Church, Painesville, Ohio, October 1951.
"Precision Causes and Effect on Textile Machinery" by l.R. LONGSTREEf, talk
before Providence & Worchester Section of American Society of Mechanical
Engineers, December 4, 1951.
How to Get the Most Out of Your Turret Lathe, by the Warner & Swasey Company; miscellaneous articles, 1949-1952; compilation attributed to E.L. MUR-
RAY.
A-365
366
367
368
369
370
371
372
373
"Carbide Tooling on Small Lots" by J. McFADYEN, Cutting Tool Supervisor,
Tooling & Production, February 1952, draft of article, nd.
"The Warner & Swasey Sulzer Weaving Machine" by E.R. GARDNER, Sales
Manager Textile Division, address before American Society of Mechanical
Engineers, Textile Division, May 16, 1952.
"Tough Selling Ahead" by D.M. PATTISON, address before Ohio Valley Industrial Advertisers Council, May 22, 1952.
"Screw Machine Engineering Principles and Practices" parts XI and XII by E.L.
MURRAY, Screw Machine Engineering, May and June, 1952; "Turret Lathe
Attachments by E.L. Murray, draft of article for SME., May 1952, nd; "The
Elements of Turret Lathe Tooling" by E.L. MURRAY, draft of article for
SME, June 1952, nd.
"The Economics and Philosophy of Choosing New Machinery and Equipment"
by D.M. PATTISON, paper before the American Society of Mechanical Engineers, June 1952.
"How the Warner & Swasey Cut Their Heating Bills" by H.M. NOBIS, Plant
Engineer, The Plant, June 1952.
"Sales Results of the Warner & Swasey Opinion Forming Campaign" by D.M.
PATTISON, Vice President in Charge of Sales, address before the National
Industrial Advertisers' Association, July 2, 1952.
"Running Sequence of Similar Parts Reduces Setup Time" attributed to E.L.
MURRAY, (Crawford Fittings Company), Screw Machine Engineering, July
1952, draft of article, nd; "Break Even Point. ..is vitally important to operate
at lowest costs" (Cloyes Gear Works), E.L. MURRAY, Screw Machine Engineering, August 1952; draft of article, nd.
"Expanding Precision Machine Production Through Subcentracting" by W.K.
BAILEY, Manufacturing Vice President, nd.
374
375
376
377
378
379
380
381
382
383
384
385
A-386
387
388
389
390
391
392
393
394
Untitled address by W.A. MAYBORN, before Commerce & Industry Division,
Cleveland Community Fund, September 25, 1952.
"How to Make Machinists" by GEORGE F. MEYER, Supervisor of Training,
draft of article prepared for Mill & Factory, November 1952, nd; photographs.
Letter from C.J. STILWELL, President, to Industrial Marketing's Top Management Forum, December 1952.
"Boosting Output of the Power Tools" by JOHN P. BANK, Works Manager, Independent Pneumatic Tool Company, draft of article for Iron A~e, 1952, nd.
"Appearance Comes in Three Shades" by M.W. PAPP, Standards Engineer,
paper presented to American Society of Mechanical Engineers, December
1952.
Untitled Article by C.J. STILWELL, President, for Newsweek, submitted December 15, 1952.
Untitled Article approved by Cil. STILWELL, for Wall Street Journal, submitted
December 22, 1952.
Untitled Statement by L.D. McDONALD, Executive Vice President, Steel, submitted November 1952.
Suggested outline for Talk on Training Program attributed to E.W. GRESSLE,
February 2, 1953.
"For Carbide Tooling - Your Turret Lathe Needs the Right Size Motor" author
unknown, Toolin~ and Production, February 1953.
"What the Warner & Swasey Sulzer Weaving Machine Means to You" by HERMAN B. HUNTER, address before the Midwest Woolen Manufacturers Association, February 10, 1953.
"Preventive Maintenance is...Production's Silent Partner" by CARL DeCUMBE,
Maintenance Superintendent, Electric Construction & Maintenance, 1953.
"Gradall Operation is Completely Hydraulic" by S.F. WINCHELL, Chief Engineer, The Hydraulic Engineer, February-March, 1953.
"Organization of the Warner & Swasey Library" attributed to MRS. O.D. FERGUSON of the School of Library Science, Western Reserve University, May
18,1953.
"Don't Overlook Finge Benefits of Machine Tools" D.M. PATTISON, Sales Vice
President, Iron Age, May 21, 1953.
"Computing Earnings as Modernization" by D.M. PATTISON, Sales Vice President, draft of article for Textile World, October 28, 1952.
"Qualification Testing of Control Relays" by R.H. SCHUMAN, Engineering Phys
-icist, Electrical Manufacturing, June 1953, correspondence relating to article.
"The Economics and Philosophy of Choosing New Machinery and Equipment"
by D.M. PATTISON, Sales Vice President, mailing piece based on ASME paper, 1953.
Letter to United States Chamber of Commerce from Don KNOWLTON relating
to replacement, August 7, 1953.
Untitled Article relating to industrial libraries attributed to DALE STONEMAN,
for Factory Magazine, 1953.
47
395
395a
396
397
398
398a
399
400
401
402
403
404
405
406
A-406a
407
408
409
410
411
"Warner & Swasey Machine Finishing Standardization Studies Reap Important
Results in Economy and Appearance" by WALTER RUDOLF, Organic Finishing, September 1953.
"Designing Cans With the Aid Of Computers" by RE GRIFFIN, Research Engineer, paper presented before Purdue University Conference on Machine
Design, October 1953.
"When Automatics Make Intricate Parts" author unknown, (Hawk-Eye Works,
Eastman-Kodak Company) American Machinist, November 9, 1953;
correspondence relating to article.
New Roof Sign on Company Building - article in Turret Topics, November,
1953, correspondence relating to sign.
"Economies of Tooling and Lathe Selection", author unknown, The Tool Engineer, November 1953.
"Planned Crane Maintenance" by WALTER RUDOLPH, Mill & Factory,
December, correspondence relating to article.
"Improved Chuck Speeds Machining of Brass Parts" by D. STONEMAN, Tool
Engineer, Iron Age, December 3, 1953; "Speeding Multiple End - Piece
Machining in Brass Shops" by D. STONEMAN, Tool Engineer, draft of
article, nd.
"Year-End Statements by C.J. STILWELL, President, Industrial Marketing, Iron
Age, Newsweek, January 1954.
"Guarding Against Obsolescence" By G.L. KLUTER, Works Engineer, draft of
article for Tooling and Production Magazine, nd.
Articles and Talks by L.D. McDONALD, 1935-1949.
Articles and Talks by L.D. McDONALD, 1950-1953.
"Practical Machine Tool Economics" by M.S. CURTIS, Engineering Vice President, paper presented before American Society of Mechanical Engineers, Fairfield County Section, March 16, 1954.
"Lower Prices: Through New Machines" by FREDERICK V. GEIER, President,
The Cincinnati Milling Machine Company, U.S. News & World Report,
March 12, 1954.
"Automatics Can Show Profits on Short Runs" by D. STONEMAN, Tool Engineer, Iron Age, April 22, 1954; correspondence relating to article.
"The New Warner & Swasey Filling Mix Unit", author unknown, submitted to
Textile World, nd.; Letters relating to article.
"How Good is European Machine Design?" by NOBLE B. CLARK, Sales Manager, Tool Division, Cleveland Engineering, 1954.
"Production Without Prototype Cuts New Model Costs" by C.T. BLAKE, Executive Assistant to the Vice President Engineering, The Iron Age, May 20,
1954; correspondence relating to article.
"Hydraulic Control System...for 6-Speed Chucking Machine" by RC. EBERSOLD, Development Engineer, submitted to Applied Hydraulics, paper
contest, May 28, 1953.
"Warner & Swasey Pacific Converter" by GERMINAL GERAUDS, lecture before Textile Machinery Society, Osaka, Japan, November 24, 1975.
Statement by EW. BLAISDELL, JR, General Works Manager, for the Fore-
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
A-427
428
429
man's Club of Greater Cleveland, 1954.
"What's Ahead for Machine Tools" interview of C.J. STILWELL, President,
Iron Age, July 22, 1954.
"Single-Spindle Automatics Solve Production Problems" by MARVIN H.
PALM, Division Superintendent, Wagner Electric Corporation, The Tool Engineer, August 1954; correspondence relating to article.
"Management-Labor Relations in Industry" by C.W. UFFORD, outline for talk,
September, 1954.
"Leth the Other Fellow Know" by W. SEELY, Vice President, talk before
Ohio Society of Professional Engineers, October 9, 1954; correspondence relating to talk.
"Excess Reject System" by S. WINCHELL, Chief Quality Engineer, article submitted to American Machinist, nd; correspondence relating to article.
List of Talks and Papers by Members of the Engineering Department, 19471954.
"A Precise Technique for Accurate Checking of Gear Dimensions" by W.S.
TANDLER, President, Warner & Swasey Research Corporation, paper before
American Gear Manufacturers Association, October 1954; correspondence
"Preventive Maintenance School" by A.H. KEETCH, Science Manager, Tooling
and Production, November 1954; "School for Preventive Maintenance" by
A.H. KEETCH, draft of article, nd.; correspondence relating to article.
Statement of C.J. STILWELL, President, for interview by New York Journal of
Commerce, December 1954.
"Why Lease Machine Tools" by LESTER M. COLE, General Sales Manager,
December 16, 1954; killed, February 1955.
"Management Looks to the Foreman" by C.J. STILWELL, President, talk before
Foremen's Club of Greater Cleveland, February 16, 1955.
"Drill Speeder Cuts Deep Hole Drilling Time" (Bradley Pulverizer Company),
author unknown, Screw Machine Engineering, July 1955; letters relating to
article.
"So You Want to Cut Costs", author unknown, Steel, March 14, 1955.
"Roughness Standards" by M.W. PAPP, Senior Engineer, Machinery, May 1955,
vol. 61, no. 9; "Roughness Standards Developed to Meet Machine Tool Building Requirements" by M.W. PAPP, Machinery (British), August 19, 1955,
vol. 87; correspondence relating to article.
Untitled Address by Ccl, STILWELL, President, before Lorain County Industrial
Council of Clergy - Industry Discussion Group, May 17, 1955.
"Dual Pressure Relief Value" by RC. EVERSOLD, Development Engineer,
Applied Hydraulics, September 1955.
"Dynamics in Modem Machine Design" by RF. GRIFFIN, address at Pennsylvania State College, June 21, 1955.
"A Builder of Universal Machine Tools Looks at Automation" by RC. EBERSOLD, Development Engineer, talk to Pennsylvania State University, June
14, 1955; "New Designs In Universal Machine Tools" by RC. EBERSOLD,
condensed from talk, Production, August 1955.
49
430
431
432
433
434
435
436
437
438
439
"Redesign of Machine Components from Casting to Wellment" by A.J.
McCLELLAND, Development Engineer, submitted to Lincoln Electric Machine Tool Award Competition, 1955.
Untitled talk by W.K. BAILEY, President, before New York Society of Security
Analysts, June 23, 1955; correspondence relating to talk on Warner & Swasey
History and Development.
"Radio-Isotopes Measure Tool Wear in Metal-Cutting" by RT. HOOK, Chief
Metallurgist, Machinery, November 1955; "La Mesure de I'usure des Outils
De Coupe Par Les Radio - Isotopes" by RT. HOOK, Machine Moderne,
April 1956, correspondence relating to article.
"Highlights of the Recommended Practices for Electric Installations on Textile
Machinery Prepared for the AlEE Sub-Committee on Textiles" by RH.
CLARK, Chief Electrical Engineer, AlEE Conference on Electrical Equipment for the Textile Industry, November 3, 1955.
"When Can an Invention be Commercialized" attributed to T.T. PECHY, submitted to Machine Design, 1956; correspondence relating to article.
"Modern Machinery-Its Relation to Fiber Blending" by H.P. BALSOM, Field
Engineer, address before Textile Society of Canada, 1955.
Year-end Statements by W.K. BAILEY, President, Wall Street Journal, Steel,
Plain Dealer, 1955.
Untitled address on Engineering and Metallurgical Problems in Textile Machine
Manufacturing by RT. HOOK, presented before Worcester Chapter of the
American Society for Metals, January 11, 1956; "High Speed Weaving
Machine", author unknown, Product En~ineering, September 1956, "Metallurgical Modifications Speed Production of Textile Machines" by RT. HOOK,
Chief Metallurgist, article rejected by Machine Design, 1957; "Heat-Treat
Gives Part 'Impossible' Performance", author unknown, Metalworkin~,
October 1958.
"Four-in-One" Machine Redesigned for Welding" by N.P. DARASH, Industry
and Welding Monthly, January 1956.
"The Significance of Industrial Productivity" by W.K. BAILEY, President,
address before Cleveland Chamber of Commerce, February 24, 1956, July
1956.
440
441
A-442
443
444
445
"Summary of the Warner & Swasey Company, 1955" by W.K. BAILEY, President, February 1956.
"Benefits to Machine Tool Builders of Standardization" by W. SEELY, Vice
President, talk for the National Association of Purchasing Agents Panel
Discussion, February 16, 1956; correspondence related to talk.
"Method of Feed Controls for Machine Tools Electro-Mechanical Type" WARREN E. DOWLING, Assistant Supervisor Machine Tools, address before
Cleveland Engineering Society, March 27, 1956.
"Modernization Begins at Home" by W.K. BAILEY, President, The Tool Engineer, September 1956; correspondence relating to article.
"Alloy Steels Extend Machine Tool Service Life" by RT. HOOK, Chief Metallurgist, Iron Age, April 26, 1956; correspondence relating to article.
446
A-446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
"Late Developments in Carbide and Ceramic Tooling" by RT. HOOK, address
before American Society of Tool Engineers, September 10, 1956.
"Ceramic Tools in Production and in the Laboratory" by RT. HOOK, Chief Metallurgist, The Tool Engineer, August 1956; Untitled Speech in Ceramics by
RT. HOOK, before ASTE, Purdue University, April 28, 1956.
Untitled paper on Cutting Tools by RT. HOOK, Conference on Tooling and
Material, June 14, 1956; "How Good are Ceramic Tools" (part 4) by RT.
HOOK, Chief Metallurgist, American Machinist, December 3, 1956.
"Complex Turret Lathe Production" by J. LONGENECKER, Automatic Machining, July 1956.
"A Toolroom Goes Job Shop" author unknown, Steel, August 20, 1956.
"Advertising, Publicity, Promotion Techniques Adapted to Credit" by E.B.
GAUSBY, Secretary, Credit and Financial Management, August 1956.
"How to Find the Cheapest Machining Methods" by RT. HOOK, Chief Metallurgist, American Metallurgist; December 31, 1956; "Important Factors in Metal
Cutting Economics" by RT. HOOK; draft of article, nd.
"Hydrostatic Transmissions for Construction" by S.F. WINCHELL, Chief Quality
Engineer, Applied Hydraulics, December 1956; "Dual Fluid Motors" by
WILLIAM M. SHOOK, Chief Gradall Engineer, Applied Hydraulics, December, 1956.
"More Delegatory Builds Better Maintenance Force", author unknown, Factory
Management and Maintenance, March 1957.
"Design Factors for Controlling Manufacturing Costs" by LAD. J. BAYER, Chief
Industrial Engineer, Machine Design, August 9, 1956.
"A General View of Numerical Controls" by RH. SCHUMAN, nd.
"Philosophy of Business" by W.K. BAILEY, President, Junior Chamber of Commerce Roster and Year Book, January 1957.
"Mechanical Arm Reaches Out to Build Highways" author unknown, Machinery,
December 1956.
"Standards for Performance Quality" by M.W. PAPP, Standards Engineer,
Machine Design, May 2, 1957; correspondence relating to article.
"Turret Tooling Flexes Valve Machining" by GEORGE K. STEHLE, General
Superintendent, Kennedy Valve Manufacturing Company, American Machinist, April 8, 1956.
"Cutting Tools: Great Promise for New Materials" by RT. HOOK, Chief Metallurgist, Iron Age, March 14, 1957; correspondence relating to article.
"Industrial Application of Ceramic Tools" by ALFRED O. HAEME, Tool Superintendent and RT. HOOK, Chief Metallurgist, paper presented before American Society of Tool Engineers, March 1957; correspondence relating to paper.
Untitled speech by RT. HOOK on new developments and new equipment in textile division, February 22, 1957; "Current Machines and Future Developments"
by H.B. HUNTER, New Product and Development Department Textile
Divison, Canadian Textile Journal, April 5, 1957.
"How Are Your Carbide Tools Performing?" data by J.P. ALLEN, Research
Engineer, Machinery, January 1957, March 1957.
"Testing Packings on a Plant-built Machine" author unknown, Applied Hydrau-
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
lic, May 1957.
"Statement by L.M. COLE," draft of speech before National Industrial Conference.
Board, July 25, 1956.
"Automatic Tester Simulates Arcuits for Control Panels" by EJ. LOEFFLER and
J.R LONGENECKER, Electrical Engineering Department; Electrical
Manufacturing, August 1957; "Heading Off Customer Headaches in Electrical
Circuits" by EJ. LOEFFLER, Electrical Engineer, Cleveland Engineering,
April 4, 1957.
"Production Dividends from Basic Metal Cutting Tests" by RT. HOOK, Chief
Metallurgist, submitted to American Machinist, May 1957.
"Heat Treating Information Via Blueprints" by RT. HOOK, Chief Metallurgist,
submitted to Steel, April 1957.
"The Choice of the Ideal Machine Tool Relay" by EJ. LOEFFLER, for Automatic Control, June 1957.
"Worsted Blending - How Much is Enough?" by WATSON J. WOOD, Manager,
Knitters, Ltd.; Textile Industries, January 1957.
Untitled address by W.K. BAILEY, before Security Analysts, May 22, 1957.
"Numerical Control for Machinery" by RH. SCHUMAN and C.D. COFFIN, address before American Society of Mechanical Engineers, May 1957.
"Electrohydraulic Servomechanism With an Ultrahigh Frequency Response" by
by c.K. TAFT, Research Engineer, RH. SCHUMAN, Engineering Physicist,
D.P. ECKMAN, Professor of Mechanical Engineering at Case Institute of
Technology; presented before American Society of Mechanical Engineers,
March 1956; "An Analysis of an Electro-Hydraulic Positional Servomechanism" by CHARLES K. TAFT; MS. Thesis at Case Institute, 1955.
"Tape Controls Inspection Machine", author unknown, Steel, May 27, 1957.
"Ceramics-Tomorrow's Cutters Today?" by RT. HOOK, Chief Metallurgist, address before Industrial Education Institute, June 18, 1957 (used as basis for article - A-49l).
"Industrial Application of Ceramic Tools" by A.O. HAEME, Tool Superintendent
and RT. HOOK, Chief Metallurgist; paper presented before American Society
of Tool Engineers, June 28, 1957.
"Les Progres en Filature de Laine" by G.N. GIRAUDI, L'Industrie Textile, May
1957.
"Induction Harden Guide Small Lots for Extra Benefits" by RT. HOOK, Chief
Metallurgist, Iron Age, September 26, 1957; Metal Treating, March-April
1958.
"Ergonomics: A Human Guide to Machine Design" by E.c. BEAUDEf, Managing Editor of Iron Age, Iron Age, June 13, 1957.
"Evaluation of Previous Predictions" by EJ. LOEFFLER, prepared for American
Machinist, September 20, 1957.
"Quality Control Begins with a Gaging Policy" by RUPERT LE GRAND, Senior
Associate Editor, American Machinist, December 2, 1957; correspondence relating to article.
"Permanent Fixture Boring Reduces Set-Up Time" by G. KLUTER, Works Engi-
~?
484
485
486
487
A-488
489
490
491
492
493
494
495
496
497
498
499
500
501
neer, Metalworkinl:, November 1957.
"A Good Training Program is Good Business" by W.e. BURTON, Service Manager, Gradall Division, Construction Equipment News, September, 1957.
"Numerical Control Impact on Machine Design" by RH. SCHUMAN, Chief
Physicist, prepared for American Society of Mechanical Engineers, December
1957: June 26, 1957.
Year-end Statement by W.K. BAILEY, President, Steel, January 1958.
"New 'Eye' for Case Observatory" by H.W. SPREITZER, Development Engineer, Cleveland Enl:ineerinl:, January 2, 1958.
"Reducing Metal-Cutting Costs" by RT. HOOK, Chief Metallurgist, The Tool
Enl:ineer, May 1958; "Cutting Metal Cutting Costs" by RT. HOOK, Chief
Metallurgist, paper before the American Society of Tool Engineers, May 1958.
"Carbide vs. Carbide" by RT. HOOK, Chief Metallurgist, Automatic Machining,
October 1958; "Does Metal Cutting Research Pay Off' by RT. HOOK; prepared for Metalworking.
"The Heat Factor - cutting tool temperatures, ceramics vs. carbides" by N.H.
COOK, Assistant Professor, Mechanical Engineering, Massachusetts Institute
of Technology, Automatic Machining, May 1958; correspondence relating to
article.
"Ceramics - Tomorrow's Cutters Today?" by RT. HOOK, Chief Metallurgist,
nd.
"Ceramic Turning Tools" by H.D. MOORE and D.R KIBBEY, Department of
Industrial Engineering, Ohio State University, presented before the Annual
Conference for Engineers, May 2, 1958.
"Automatic Gaging by Tape Control" by W.S. TANDLER, Warner & Swasey
Research Corporation, The Tool Engineer, September 1957.
"The Supervisor and the Industrial Engineer" by RT. STUDER, Administrative
Engineer, Supervisory Management, October 1958; "The Foreman's Role in
Industrial Engineering" by RT. STUDER, talk before SAM-ASME Management Engineering Conference, April 25, 1958.
"Sistema Americano vs. Sistema Bradford" by T.L. STILWELL, Genente de
Ventas, Textiles Panamericanos, March 1958.
"High Pressure Filter for Best Operation" by RF. GRIFFIN, Manager, Research
and Development Laboratory, and A.J. McCLELLAND, Assistant Manager,
Machine Tool Design, survey submitted to Applied Hydraulics, 1958.
"Side Rails Locate Fixtures Accurately on Index Tables" (DeVlieg Jig Mills) by
A.O. HAEME, Tool Superintendent, for American Machinist, 1958.
"Ceramic Cutting Tools from Europe" by RT. HOOK. Chief Metallurgist, for
American Machinist, 1958.
"Ceramics Replace Grinding" by RT. HOOK, Chief Metallurgist, American Machinist, 1958; "Tests Show Ceramic Tools May Eliminate Need for Cylendrical
Grinding Some Parts" by RT. HOOK, American Machinist, 1958.
"Heat Treating Modern Machine Tools" by RT. HOOK, Chief Metallurgist, Metalworking, 1958; correspondence relating to article.
"Numerical Control" by M.S. CURTIS, given at Purdue University, July 31,
1958.
502
503
504
505
.506
507
"The Place Ceramic Tooling Will Occupy in Production" by R.T. HOOK, Chief
Metallurgist, paper presented before Engineering Institute Seminar, University
of Wisconsin, September 24, 1958.
"Iso Symbols for Machine Tool Controls" by C.T. BLAKE, Director of Engineering, Talk before ASA Conference on Standards, November 19, 1958; correspondence relating to talk.
"Pin Controlled Drawing in Yam Manufacturing" T .L. STILWELL, Sales Manager, Southern Textile News, October 4, 1958.
Miscellaneous Papers by C.W. UFFORD on Personnel-Industrial Relations; 1956
-1958.
"Russian Ceramics: Unusual Geometry contrasts with U.S. Practice" by R. T.
HOOK, Chief Metallurgist, American Machinist, December 1, 1958.
"You Can Make Ceramic Tools Pay Off' author unknown, Steel, December 15,
1958.

The Warner and Swasey Collection - Blog@Case

Transcription

Similar documents

The Swasey Daily - Swasey Central School

View Sample Display Ads

Thank you from the Rasmussen Family

Navigon MobileNavigator using POI Warner sync setup

Wednesday, Dec. 12, 11 am to 1 pm Texins Activity Center

2-page-FICA_ad

HaloLEDs deliver ambiance at Littlecote House Hotel

July 23-24, 2016 / 17th Sunday in Ordinary Time

Carson Machine Automation

WE MANUFACTURE AND SUPPLY SURGICAL,