Tesmec-Trenchers Catalogue 2013

CHAINSAW
Dirt series 775DT CS
THE
NEW 775DT IS THE FIRST “LIGHT” TESMEC CHAINSAW TRENCHER SPECIFICALLY
DEVELOPED FOR DIRT EXCAVATION AND DRAINAGE WORKS. LIGHT WEIGHT AND
ROBUSTNESS, TRANSPORTABILITY, PRODUCTIVITY AND RELIABILITY, AND VERY HIGH USER
FRIENDLINESS THANKS TO THE BRAND NEW ELECTRONIC CONTROL TRENCHTRONIC 3.0 ARE
THE MAIN CHARACTERISTIC OF THIS MACHINE.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0200
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
775DT “Dirt Series” Chainsaw
Specification
2'-1"
[63cm]
'%
5/ er
6' ench
10'-2"
[310cm]
"B"
6'5/'%
Trencher
Tr
*
6'5/'%
"A"
230
Trencher
11'-1.9"
[340cm]
5'-10"
[178cm]
8' ft MACHINE SHOWN
MIN 10" [25cm]
MAX 24" [61cm]
2'-7"
[80cm]
8'-4"
[255cm]
* Dimension 10’ 2’’ [310 cm] becomes 10’ 4’’ [315 cm] in
the case of using single grouser.
“A”
“B”
6’
6’ (183 cm)
29’-4’’ (895 cm)
8’
8’ (244 cm)
31’-5’’ (959 cm)
100
BOOM
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning,
heating, sound suppression and ROPS structure
TrenchTronic 3.0 electronic machine control
with:
• Operator selectable digging pressure and
automatic operation
• Fully automatic operation
• Remote diagnostic system
Electrical system: 24 V
Self-leveling (tilting) undercarriage:
• Track tilt angle: 10°
• Automatic/manual operation
Weight.......................................34,171-41,887 lbs
......................................(15.500-19.000 kg)
Ground pressure................................4.05-4.98 psi
....................(0.285-0.35 kg/cm2)
Pressure and flow compensated (load sensing)
Pump flow maximum..............53 gpm (201 l/min)
Pressure setting......................2.600 psi (180 bar)
Oil tank capacity................................77 gal (290 l)
Note: dependent on configuration and options
Cross Conveyor
Trencher Drive
Note: ask to Tesmec Trenchers Technical Department for
the max width at max depth configuration
Hydrostatic: one pump and one motor capable of
transmitting full engine horsepower
Flywheel gearbox
Infinitely variable digging chain speeds
.......................................0-850 fpm (0-259 m/min)
Tesmec designed single strand, 4” 1/2 (11.4 cm)
pitch chain, “K” style
Single piece, light boom for dirt & soft soil
Standard cutters: single edge, hard surfaced cup
cutters for dirt
Engine
Crawler Drive
Trenching Dimensions
Max depth............................................8’ (244 cm)
Widths range..........................10”-24” (25-61 cm)
Model........................................CAT C6.6 TA Tier 3
Max horsepower.........................225 hp (168 kW)
Max no load rpm.....................................2.150 rpm
Fuel tank capacity.....................121.5 gal (460 l)
Fuel consumption.................12.2 gal/hr (46 l/hr)
at full load
Cooling rating adequate for 130° F (54.4° C)
ambient air temperature
Air cleaner: dry type 2 stages with
pre-cleaner and automatic dust ejection
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Hydrostatic drive, planetary transmissions
capable of full counter rotation with single lever
steering, single lever direction
Infinitely variable speed: forward and reverse
Speed range.................... 0-2.1 mph (0-3.3 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Tracks
Overall track length....................11’ 1.9” (340 cm)
Track pad type: single grouser, chamfered edges
Track chain type: FL6
Track pad width.................................2’ 7” (80 cm)
Pressure and flow compensated pump with dual
hydraulic drive motors reversible and shiftable
Belt speed infinitely variable
.......................................0-820 fpm (0-250 m/min)
Discharge direction: right or left
Conveyor belt width..........................1’ 6” (76 cm)
Conveyor length..............................8’ 4” (254 cm)
Discharge height...........................4’ 11” (152 cm)
Transport Dimensions
Length with 8’ boom.................... 31’ 5” (959 cm)
and crumbshoe
Width............................................8’ 4” (255 cm)
Height.........................................10’ 2” (310 cm)
Available Devices
Work light package: 24 V, for night use
Automatic laser control system for depth
control (Trimble make)
Hydraulic crumbshoe
Automatic laying system for pipes, including:
• gravel hopper
• laying crumbshoe
• guide rollers
• horizontal axis reel carrier:
• max. reel diameter: 5’ (152 cm)
• max. reel weight: 940 kg
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0200
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
885 CS
CHAINSAW
TRENCHER SPECIALLY DESIGNED FOR FIBER-OPTIC PROJECTS IN URBAN AND
SUBURBAN AREAS. THIS MODEL FEATURES OFFSET DIGGING CHAIN, TILTING TRACKS,
ELEVATING CAB AND - AS MAIN OPTIONAL - AUTOMATIC CABLE LAYING SYSTEM, BACKFILLING SYSTEM AND TRUCK LOADING CONVEYOR. THE 885 CAN ALSO BE EMPLOYED IN
TRENCH EXCAVATION FOR SMALL UNDERGROUND UTILITIES SUCH AS ELECTRIC CABLES,
WATER, GAS AND OTHER. TRENCHTRONIC 3.0 EQUIPPED.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0300
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
885 Chainsaw
Specification
"B"
8'-4"
[253cm]
TESMEC
Trencher
23°
TESMEC
7'-4"
[224cm]
-5°
5°
16°
5'-1"
[155cm]
8'-4"
[253cm]
11'-10"
[360cm]
9'-6"
[290cm]
"A"
8'-4"
[255cm]
4' ft MACHINE SHOWN
1'-8"
[51cm]
Trencher
1'-6"
[46cm]
2'-2"
[65cm]
13'-1"
[400cm]
9'-1"
[276cm]
r
he
nc
Tre
TE
SM
EC
2'-2"
[65cm]
Boom
“A”
“B”
3’
3’ (91 cm)
28’-11” (883 cm)
4’
4’ (122 cm)
29’-11” (913 cm)
5’
5’ (152 cm)
30’-11” (943 cm)
1'-8"
[50cm]
Min 8" [20cm]
Max 18" [46cm]
5'-7"
[169cm]
7'-10"
[240cm]
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating,
sound suppression
Elevating cab module with roll over protection
(ROPS)
TrenchTronic 3.0 electronic machine control with:
• Operator selectable digging pressure and
automatic operation
• Fully automatic operation
• Remote diagnostic system
Positive locking digging chain adjustment
Stabilizers with dirt drags: automatically adjust to
terrain changes
Vibration isolator mount: used on engine, radiator,
oil cooler, exhaust silencer and operator station
Electrical system: 24 V
Weight.......................................39,683-46,297 lbs
...................................(18.000-21.000 kg)
Ground pressure.....................................10-12 psi
.......................(0.70-0.80 kg/cm2)
Pressure and flow compensated (load sensing)
Pump flow maximum..............46 gpm (175 l/min)
Pressure setting......................2.500 psi (172 bar)
Oil tank capacity................................80 gal (300 l)
Trenching Dimensions
SINGLE BOOM
• Max depth.......................................5’ (152 cm)
• Widths range........................8”-18” (20 - 45 cm)
Note: dependent on configuration and options
Engine
Model.................................CAT C6.6 ACERT Tier 3
Max horsepower.........................196 hp (146 kW)
Max no load rpm.....................................2.150 rpm
Fuel tank capacity........................106 gal (400 l)
Fuel consumption.................11.4 gal/hr (43 l/hr)
at full load
Cooling rating adequate for 122° F (50° C)
ambient air temperature
Air cleaner: dry type, 2 stages with dual
pre-cleaner
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Note: dependent on configuration and options
Cross Conveyor
Trencher Drive
Hydrostatic: one variable displacement pump and
one motor
Flywheel gearbox: shaved, helical gearing, case
hardened for extreme shock load
Infinitely variable digging chain speeds
.......................................0-690 fpm (0-210 m/min)
Tesmec designed single strand, 4.5” (11.4 cm)
pitch chain, “K” or “M” style
Digging teeth:
• (Rock) 1” (2.54 cm) diameter shank, rotary
carbide insert
• (Dirt) single edge, hard surface cup cutters
Crawler Drive
Dual path, hydraulic drive, planetary
transmissions with single lever steering, single
lever direction
Variable displacement pump and motor
Infinitely variable speed:
forward and reverse.........0-2.2 mph (0-3.6 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Tracks
Self-leveling (tilting) undercarriage:
• Track tilt angle: +5°/-5°
• Automatic/manual operation
Overall track length..........................8’ 4” (255 cm)
Track pad type: triple grouser
Track chain type: FL6
Track pad width................................1’ 8” (50 cm)
Pressure and flow compensated pump with dual
hydraulic drive motors
Belt speed infinitely variable
...................................0-1.148 fpm (0-350 m/min)
Discharge direction: right or left
Conveyor belt width..........................1’ 8” (50 cm)
Conveyor length..............................6’ 1” (185 cm)
Transport Dimensions
Length with crumbshoe and truck loading
conveyor...................3 ft boom: 28’ 11” (883 cm)
..................4 ft boom: 29’ 11” (913 cm)
...................5 ft boom: 30’ 11” (943 cm
Width............................................8’ 4” (253 cm)
Height ..........................................9’ 6” (290 cm)
Available Devices
Work light package: 24 V, for night use
Automatic laser control system for depth
control (Trimble make)
Hydraulic crumbshoe
Automatic laying systems for cable and PVC pipe
Extended cross conveyor with hydraulic shift
Fuel pump, quick fill
Digging teeth*:
• (Rock) 1 1/2’’ diameter shank, rotary carbide
insert (3.81 cm)
• (Dirt) Tesmec spade teeth
Note: available with TESMEC blocks that allow use of
all industry standard 1-1/2’’ conical teeth, as well as
TESMEC spade teeth
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0300
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
975 CS
MID-SIZE CHAINSAW
TRENCHER CONCEIVED FOR ROCK EXCAVATION FOR UTILITIES
PROJECTS SUCH AS FIBER OPTIC, ELECTRIC CABLES, WATER CONDUITS, PIPELINES AND
OTHER. THE 975 CAN BE EQUIPPED WITH ELEVATING CABIN AND TILTING TRACKS; UPON
REQUEST IT CAN ALSO FIT AN AUTOMATIC LAYING SYSTEM FOR FIBER OPTIC BACK-BONE
PROJECTS OR ELECTRIC CABLE NETWORKS. TRENCHTRONIC 3.0 EQUIPPED.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0500
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
975 Chainsaw
15'-1"
[460cm]
6'-0"
[184cm]
975
OIL
DRAIN
LEVEL
OIL LEVEL
GEAR BOX
MOD.41T-140-SAE
SERIAL N°
6'-10"
[208cm]
nc
he
r
TESMEC
OIL LEVEL
Tre
SM
EC
DRAIN
TE
OIL
12'-7"
[385cm]
12'-9"
[389cm]
"B"
OIL
6'-0"
[184cm]
9'-7"
[291cm]
Specification
Trencher
OIL LEVEL
OIL DRAIN
FILL WITH : 85W/140W
WARNING : FAILURE DUE
TO LACK OF LUBRICATION
VOIDS WARRANTY
OIL
LEVEL
OIL DRAIN
TESMEC
Trencher
1'-6"
[46cm]
10'-4"
[315cm]
16°
5'-0"
[153cm]
2'-0"
[61cm] Track
"A"
5'-0"
[153cm]
Min 12" [30cm]
Max 36" [91cm]
8'-4"
[254cm]
9'-9"
[298cm]
8'-2"
[249cm]
8' ft MACHINE SHOWN
10°
11'-10"
[360cm]
8°
-8°
Boom
“A”
“B”
4’
4’ (122 cm)
27’-6’’ (839 cm)
6’
6’ (183 cm)
29’-10’’ (909 cm)
8’
8’ (244 cm)
32’-6’’ (990 cm)
10’
10’ (305 cm)
34’-9’’ (1.059 cm)
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating,
sound suppression
Elevating cab module with roll over protection
(ROPS)
TrenchTronic 3.0 electronic machine control with:
• Operator selectable digging pressure and
automatic operation
• Fully automatic operation
• Remote diagnostic system
Electrical system: 24 V
Anti vibration isolator mounts: used on engine,
radiator/oil cooler unit and cab
Stabilizers with trench cleaners: automatically
adjust to terrain changes
Positive locking digging chain adjustment
Weight.......................................55,116-72,752 lbs
..................................(25.000-33.000 kg)
Ground pressure.....................9.7-12.4 lbs/Sq Inch
......................(0.68-0.90 kg/cm2)
Pressure and flow compensated (load sensing)
Pump flow maximum..............43 gpm (164 l/min)
Pressure setting......................2.500 psi (172 bar)
Oil tank capacity................................73 gal (275 l)
Trenching Dimensions
SINGLE BOOM
• Max depth......................................10’ (305 cm)
• Widths range.......................12”-18” (30-45 cm)
DOUBLE LINK BOOM
• Max depth......................................10’ (305 cm)
• Widths range.......................18”-28” (45-71 cm)
DOUBLE BOOM
• Max depth........................................8’ (244 cm)
• Widths range.......................24”-36” (61-91 cm)
Note: dependent on configuration and options
Engine
Model....................................CAT C9 ACERT Tier 3
Max horsepower.........................325 hp (242 kW)
Max no load rpm...................................2.000 rpm
Fuel tank capacity........................193 gal (730 l)
Fuel consumption..............15.4 gal/hr (58.3 l/hr)
at full load
Cooling rating adequate for 122° F (50° C)
ambient air temperature
Air cleaner: dry type, 2 stages with
pre-cleaner and automatic dust ejection
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Note: dependent on configuration and options
Cross Conveyor
Trencher Drive
Hydrostatic: one pump and two motors capable
of transmitting full engine horsepower
Flywheel gearboxes
Infinitely variable digging chain speeds
.......................................0-525 fpm (0-160 m/min)
Tesmec designed single strand or double link 4.5”
(11.4 cm) pitch chain, “K” style
Standard cutters: rotary carbide tipped 1 ½”
(3.8 cm) shank diameter
Optional cutters: single edge, hard surfaced
spade teeth for dirt - Tesmec dirt tool with 1 ½”
(3.8 cm) shank diameter
Crawler Drive
Dual path, hydrostatic drive, planetary
transmissions capable of full counter rotation
with single lever steering, single lever direction
Infinitely variable speed: forward and reverse
Speed ranges:
• High range.......................0-2.5 mph (0-4 km/hr)
• Low range....................0-1.4 mph (0-2.2 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Pressure and flow compensated pump with dual
hydraulic drive motors
Reversible and shiftable
Belt speed infinitely variable
.......................................0-790 fpm (0-240 m/min)
Discharge direction: right or left
Conveyor belt width........................1’ 11” (60 cm)
Conveyor length..............................8’ 3” (250 cm)
Discharge height..............................4’ 9” (145 cm)
Transport Dimensions
Length with crumbshoe without truck loading
conveyor......................4 ft boom: 27’ 6’’ (839 cm)
...................6 ft boom: 29’-10’’ (909 cm)
.....................8 ft boom: 32’-6’’ (990 cm)
...............10 ft boom: 34’ 9” (1.059 cm)
Width, no motor removal.............8’ 7” (261 cm)
Width, with motor removal..........8’ 4” (254 cm)
Height ........................................10’ 4” (315 cm)
Available Devices
Work light package: 24 V, for night use
Laser control system pre-wire
Hydraulic crumbshoe
Tracks
Cab anti-vandalism window covers
Overall track length..........................9’ 9” (298 cm) Polyurethane or rubber track pads
Track pad type: triple grouser
TESMEC combination digging tool holders
Track chain type: Caterpillar D5
Track pad width......................................2’ (61 cm)
Available on special order
Tilt tracks:
• Track tilt angle: 9º each direction (18º total)
• Automatic/Manual operation
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0500
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1085 CS
THE
LARGEST OFF-SET CHAIN TRENCHER FOR ROCK EXCAVATION, THIS MODEL CAN BE
EQUIPPED WITH A DIGGING CHAIN UP TO 28” (71 CM) WIDE. THE 1085 IS A MID-SIZE
UNIT EMPLOYED IN ELECTRIC CABLE AND GAS PIPELINE PROJECTS, IT CAN BE USED ALSO
FOR OTHER UTILITIES PROJECTS SUCH AS WATER AND SLURRY PIPELINES.
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0700
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1085 Chainsaw
Specification
"B"
Tr M
en EC
ch
er
TESMEC
TES
Trencher
13'-4"
[406cm]
10'-11"
[333cm]
10'-5"
[318cm]
TESMEC
Trencher
18°
"A"
10'-9"
[328cm]
9'-2"
[279cm]
2'-0"
[61cm]
TRACK
RECOIL
ADJUSTER
8' ft MACHINE SHOWN
2'-6"
[76cm]
9°
9°
Boom
“A”
“B”
4’
4’ (122 cm)
36’-9’’ (1120 cm)
6’
6’ (183 cm)
39’-2’’ (1190 cm)
8’
8’ (244 cm)
41’-5’’ (1260 cm)
Min 18" [45 cm]
Max 28" [71 cm]
ck
1'-10" Tra
[56cm]
ck
8'-3" Tra
[250cm]
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating,
sound suppression
Elevating cab module with roll over protection
(ROPS)
Load control: operator selectable digging
pressure, automatic operation
Tool box/battery box with locking door
Engine doors with security locks
Flywheel gearboxes and hydraulic tanks:
pressurized with 5 psi (0.3 bar) filtered breathers
Flywheel gearboxes: shaved, helical gearing,
case hardened for extreme shock load
Vibration isolator mount: used on engine, radiator,
oil cooler, and exhaust silencer
Electrical system..................................12 V / 24 V
Weight.......................................85,000-95,000 lbs
....................................(38.556-43.092 kg)
Pressure and flow compensated (Load sensing)
Pump flow maximum...............45 gpm (170 l/min)
Pressure setting.......................2.500 psi (172 bar)
Oil tank capacity........................108 gal (408.7 l)
Trenching Dimensions
Depths.......................4, 6, 8 ft (122, 183, 244 cm)
Widths........18”-28” double link chain (45-71 cm)
Engine
Model....................................CAT C9 ACERT Tier 3
Max horsepower.........................325 hp (242 kW)
Max no load rpm...................................2.100 rpm
Fuel tank capacity........................236 gal (893 l)
Fuel consumption..............16.5 gal/hr (62.4 l/hr)
at full load
Cooling rating adequate for 122° F (50° C)
ambient air temperature
Air cleaner: dry type, centrifugal precleaner
with primary and secondary filters
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Trencher Drive
Hydrostatic: two pumps and two motors capable
of transmitting full engine horsepower
Infinitely variable digging chain speeds
.......................................0-700 fpm (0-213 m/min)
Cutters: rotary carbide tipped 1” (2.5 cm) shank
diameter
OPTIONAL cutters: rotary carbide tipped 1 ½”
(3.81 cm) shank diameter
Double link chain tensile strength
......................................509,130 lbs (230.940 kg)
Tailwheel diameter........................3’ 4” (101.6 cm)
Double link chain tensile strength
......................................509,130 lbs (230.940 kg)
Crawler Drive
Note: dependent on configuration and options
Tesmec S.p.A.
Note: dependent on configuration and options
Dual path, hydrostatic drive, planetary
transmissions capable of full counter rotation
with single lever steering, single lever direction
Infinitely variable speed: forward and reverse
• High range...................0-3.1 mph (0-4.9 km/hr)
• Low range....................0-1.3 mph (0-2.1 km/hr)
Integral parking and emergency brake: spring
applied, hydraulic release, wet disc brake
Tracks
Conveyor
Pressure and flow compensated pump with dual
hydraulic drive motors
Description: reversible and shiftable 12” (30.5 cm)
in each direction
Belt speed infinitely variable
.......................................0-750 fpm (0-229 m/min)
Discharge direction: right or left
Conveyor belt width............................2’ (60.9 cm)
Conveyor length..............................8’ 3” (250 cm)
Transport Dimensions
Length with crumbshoe
.................................4 ft boom: 36’ 9” (1.120 cm)
.................................6 ft boom: 39’ 2” (1.190 cm)
.................................8 ft boom: 41’ 5” (1.260 cm)
Width...........................................8’ 3” (250 cm)
with 22” (0.56 m) track pads
Height with cab .......................10’ 11” (333 cm)
Height with cab elevated............13’ 4” (406 cm)
Attachment Offset..........................2’ 6” (76.2 cm)
from machine centerline either direction (60”
(152.4 cm) total), hydraulically shiftable the entire
distance without cylinder change
Overall track length................................10’ 9” (328 cm)
Available Devices
Track pad type: single, double, or triple grouser
Work light package: 24 V, for night use
Track chain type: Caterpillar D5
Track pad width........................................1’ 10” (56 cm) Laser control system pre-wire
Cab anti-vandalism window covers
Air compressor
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0700
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1150XHD CS
50
METRIC TON-CLASS, TRENCHTRONIC 3.0 EQUIPPED ROCK TRENCHER FOR MID-SIZE
PIPELINES; THE 1150XHD IS THE BEST-SELLING TESMEC TRENCHER. THIS MODEL IS
EQUIPPED WITH A 440 HP ENGINE AND CAN DIG UP TO 12’ (366 CM) DEEP AND UP
TO 42” (107 CM) WIDE, MAKING IT THE IDEAL TRENCHER FOR MID-SIZE PIPELINES AND
UNDERGROUND UTILITIES.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0900
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1150XHD Chainsaw
Specification
12'-5"
[378cm]
9'-6"
[290cm]
TE
S
Tr
en
ch
er
ME
C
Trencher
13'-1"
[399cm]
11'-1"
[338cm]
1150
TESMEC
15'-0"
[457cm]
"B"
TESMEC
Trencher
1'-11"
[57cm]
r
he
SM
TE
"A"
Tre
nc
EC
14°
12'-5"
[379cm]
Boom
“A”
“B”
6’
6’ (183 cm)
36’-5’’ (1112 cm)
8’
8’ (244 cm)
38’-5’’ (1172 cm)
10’
10’ (305 cm)
40’-9’’ (1242 cm)
12’
12’ (366 cm)
42’-9’’ (1304 cm)
10'-7"
[322cm]
4'-9"
[145cm]
2'-0" Track
[60cm]
10'-6"
[320cm]
6' ft MACHINE SHOWN
Min 18" [45cm]
Max 42" [107cm]
8'-11" Track
[271cm]
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating,
sound suppression
Elevating cab module with roll over protection
(ROPS)
TrenchTronic 3.0 electronic machine control with:
• Operator selectable digging pressure and
automatic operation
• Fully automatic operation
• Remote diagnostic system
Electrical system: 24 V
Stabilizers with adjustable drags
Gearboxes, fuel and hydraulic tanks: pressurized
with 5 psi (0.3 bar) filtered breathers
Vibration isolator mounts: used on engine, radiator,
oil cooler, exhaust silencer and cab
Weight...................................110,231-132,278 lbs
......................................(50.000-60.000 kg)
Ground pressure...................15.6-18.5 lbs/Sq Inch
...........................(1.1-1.3 kg/cm2)
Pressure and flow compensated (load sensing)
Pump flow maximum...........63.4 gpm (240 l/min)
Pressure setting......................2.500 psi (172 bar)
Oil tank capacity...........................100 gal (378.5 l)
Trenching Dimensions
SINGLE CHAIN BOOM
• Max depth........................................8’ (244 cm)
• Widths range......................18”-20” (45-51 cm)
DOUBLE CHAIN NARROW BOOM
• Max depth......................................12’ (366 cm)
• Widths range.......................28”-36” (71-91 cm)
DOUBLE CHAIN WIDE BOOM
• Max depth......................................10’ (305 cm)
• Widths range.....................34”-42” (86-107 cm)
Note: dependent on configuration and options
Engine
Model..................................CAT C13 ACERT Tier 3
Max horsepower.........................440 hp (328 kW)
Max no load rpm.....................................2.150 rpm
Fuel tank capacity....................324 gal (1.230 l)
Fuel consumption....................23 gal/hr (87 l/hr)
at full load
Cooling rating adequate for 122° F (50° C)
ambient air temperature
Air cleaner: dry type, 2 stages with
pre-cleaner and automatic dust ejection
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Note: dependent on configuration and options
Cross Conveyor
Trencher Drive
Hydrostatic: two pumps and two motors capable
of transmitting full engine horsepower
Flywheel gearboxes: shaved, helical gearing,
case hardened for extreme shock load
Infinitely variable digging chain speeds
......................................0 -550 fpm (0-168 m/min)
Tesmec designed 6.5” pitch digging chain for
single chain configuration or 4.5’’ pitch digging
chain for double chain configuration
Cutters: rotary carbide tipped 1 ½” (3.81 cm)
shank diameter
Crawler Drive
Dual path, hydrostatic drive, planetary
transmissions capable of full counter rotation
with single lever steering, single lever direction
Infinitely variable speed: forward and reverse
Speed ranges:
• High range................0-2.77 mph (0-4.46 km/hr)
• Low range................0-1.25 mph (0-2.01 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Tracks
Overall track length.......................12’ 5” (379 cm)
Track pad type: triple grouser
Track chain type: Caterpillar 42/325 or equivalent
Track pad width.....................................2” (60 cm)
Pressure and flow compensated pump with dual
hydraulic drive motors
Reversible and shiftable
Belt speed infinitely variable
.......................................0-750 fpm (0-229 m/min)
Discharge direction: right or left
Conveyor belt width..........................2’ 6” (76 cm)
Conveyor length............................13’ 8” (416 cm)
Discharge height............4’-4”- 5’-11” (123-181 cm)
Transport Dimensions
Length with crumbshoe with crumbshoe and
counterweight.........6 ft boom: 36’ 5” (1.112 cm)
.........8 ft boom: 38’ 5” (1.172 cm)
.......10 ft boom: 40’ 9” (1.242 cm)
.......12 ft boom: 42’ 9” (1.304 cm)
Width*.........................................9’ 6” (290 cm)
Height with cabin.......................11’ 1” (338 cm)
* width could be reduced to 110” (280 cm) removing
digging motors
Available Devices
Work light package: 24 V, for night use
Laser control system
Hydraulic crumbshoe
Cab anti-vandalism window covers
TESMEC combination digging tool holders
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
0900
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1475 CS
90 METRIC TON-CLASS ROCK TRENCHER FOR MID TO BIG SIZE PIPELINES, THE 1475 IS THE
SECOND LARGEST TESMEC CHAINSAW TRENCHER. TRENCHTRONIC 3.0 EQUIPPED, THIS
630 HP POWERED UNIT CAN DIG TRENCHES FOR BIG-DIAMETER PIPE UP TO 16’ (488 CM)
DEEP IN THE TOUGHEST CONDITIONS.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1400
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1475 Chainsaw
Specification
"B"
17'-3"
[525cm]
6'5/'%
Trencher
6'5/'%
Trencher
7'-7"
[231cm]
14'-6"
[441cm]
12'-3"
[373cm]
6'
Tre 5/
nc
'
he %
r
35'-3" Tractor W/Stabilizers
[1073cm]
"A"
2'-2"
[65cm]
140
15'-6"
[473cm]
4'-11"
[151cm]
10'-4"
[315cm]
2'-6" Track
[76cm]
Boom
“A”
“B”
8’
8’ (244 cm)
42’-7’’ (1292 cm)
10’
10’ (305 cm)
45’ (1372 cm)
12’
12’ (366 cm)
47’-7” (1452 cm)
14’
14’ (427 cm)
51’ (1553 cm)
16’
16’ (488 cm)
52’-5’’ (1592 cm)
Min 32" [81cm]
Max 48" [122cm]
11'-6" Tracks
[350cm]
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating, sound
suppression
Elevating cab module with roll over protection
(ROPS)
TrenchTronic 3.0 electronic machine control with:
• Operator selectable digging pressure and
automatic operation
• Fully automatic operation
• Remote diagnostic system
Battery box and toolbox with locking door
Fuel and hydraulic tank: aircraft quality locking caps
Flywheel gearbox and hydraulic tanks: pressurized
with 5 psi (0.3 bar) filtered breathers
Flywheel gearbox: shaved, helical gearing, case
hardened for extreme shock load
Vibration isolator mount: used on engine, radiator, oil
cooler, and exhaust silencer
Stabilizers / dirt drags (chainsaw only): automatically
adjust to terrain changes
Lights: 24 V forward facing
Hydraulic cooler externally mounted
Electrical system: 24 V
Weight........................................169,756-242,509 lbs
......................................(77.000-110.000 kg)
Ground pressure..........................15-21.5 lbs/Sq Inch
...........................(1.05-1.51 kg/cm2)
Pressure and flow compensated (load sensing)
Trenching Dimensions
SECTIONABLE BOOM
• Depths range....................................8’ through 16’
..................(244 cm through 488 cm)
• Min width.........................................32” (81 cm)
• Max width limited by depth:
• Max width 48” (122 cm) at 12’ (366 cm) depth
• Max width 42” (107 cm) at 14’ (427 cm) depth
• Max width 36” (91 cm) at 16’ (488 cm) depth
Note: dependent on configuration and options
Engine
Model.......................................CAT C18 ACERT Tier 3
Max horsepower..............................630 hp (470 kW)
Max no load rpm.........................................2.150 rpm
Fuel tank capacity........................360 gal (1.363 l)
Fuel consumption...................34.6 gal/hr (131 l/hr)
at full load
Cooling rating adequate for 122° F (50° C)
ambient air temperature
Air cleaner: dry type, centrifugal pre-cleaner
with primary and secondary filters
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Note: dependent on configuration and options
Pump flow maximum...................45 gpm (170 l/min)
Pressure setting..........................2.500 psi (172 bar)
Oil tank capacity..................................191 gal (723 l)
Cross Conveyor
Trencher Drive
Hydrostatic: four pumps and two motors capable of
transmitting full engine horsepower
Flywheel gearboxes, shaved, helical gearing, case
hardened for extreme shock load
4 operator selectable digging speed ranges:
............................................0-400 fpm (0-122 m/min)
............................................0-470 fpm (0-143 m/min)
............................................0-530 fpm (0-162 m/min)
............................................0-600 fpm (0-183 m/min)
Tailwheel diameter....................................4’ (122 cm)
Headshaft diameter..................................1’ (30.8 cm)
Cutters: rotary carbide tipped 1 ½” (3.81 cm) shank
diameter
Digging chain: D9L
Crawler Drive
Dual path, hydrostatic drive, planetary transmissions
capable of full counter rotation with single lever
steering, single lever direction
Infinitely variable speed: forward and reverse
Speed ranges:
• High range....................0-1.62 mph (0-2.59 km/hr)
• Low range....................0-0.81 mph (0-1.30 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Tracks
Overall track length............................15’ 6” (473 cm)
Track pad type: triple grouser
Track chain type: Caterpillar D8K (1” bolts)
Track pad width.....................................2’ 6” (76 cm)
Hydrostatic: one pump and two motors
Reversible and shiftable
Belt speed infinitely variable
............................................0-900 fpm (0-275 m/min)
Discharge direction: right or left
Conveyor belt width..........................2’ 11” (91.4 cm)
Conveyor length.................................14’ 9” (450 cm)
Discharge height..................................7’ 7” (231 cm)
Transport Dimensions
Length with crumbshoe
.....................................8 ft boom: 42’ 7” (1.292 cm)
........................................10 ft boom: 45’ (1.372 cm)
...................................12 ft boom: 47’ 7” (1.452 cm)
........................................14 ft boom: 51’ (1.553 cm)
...................................16 ft boom: 52’ 5” (1.592 cm)
Length without boom:
only tractor with stabilizers...........35’ 3” (1.073 cm)
Width.............................................11’ 6” (350 cm)
with motor removal
Height with cab..............................12’ 3” (373 cm)
Height with cab elevated .......... ....14’ 6” (441 cm)
Available Devices
Work light package: 24 V, for night use
Laser control system
Hydraulic crumbshoe
Cab anti-vandalism window covers
Air compressor
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1400
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1675 CS
TESMEC’S LARGEST CHAINSAW TRENCHER IS CONCEIVED AS A HIGH-PRODUCTIVITY MACHINE
FOR BIG DIAMETER PIPELINES AND UTILITIES PROJECTS IN HARD ROCK. TRENCHTRONIC 3.0
EQUIPPED, THANKS TO ITS 751 HP ENGINE THE 1675 CAN CUT TRENCHES UP TO 22’
(671 CM) DEEP AND 72” (183 CM) WIDE. THE PEAK OF EXCELLENCE FOR BIG PROJECTS
IN THE TOUGHEST EXCAVATING CONDITIONS.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1700
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
1675 Chainsaw
Specification
19'-0"
[579cm]
"B"
40'-11"
[1247cm]
13'-1"
[399cm]
nc
he
r
Trencher
Tre
TE
SM
EC
1675
TESMEC
TESMEC
18'-11"
[577cm]
16'-5"
[500cm]
14'-6"
[441cm]
Trencher
2'-7"
[79cm]
13°
"A"
15'-11"
[484cm]
15'-11"
[484cm]
5'-7"
[171cm]
2'-6" Track
[76cm]
10'-2"
[310cm]
9'-4"
[284cm]
20' ft MACHINE SHOWN
Boom
“A”
“B”
Boom
“A”
“B”
16’
16’ (488 cm)
57’-3’’ (1745 cm)
8’
8’ (244 cm)
57’-7’’ (1541 cm)
18’
18’ (549 cm)
59’ (1799 cm)
10’
10’ (305 cm)
52’-2’’ (1589 cm)
20’
20’ (610 cm)
60’-10’’ (1855 cm)
12’
12’ (366 cm)
53’-10’’ (1640 cm)
22’
22’ (671 cm)
62’-8’’ (1911 cm)
14’
14’ (427 cm)
55’-6” (1692 cm)
24’
24’ (732 cm)
64’-7’’ (1967 cm)
Min 28" [71 cm]
Max 42" [183 cm]
13'-1" Tracks
[398cm]
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating, sound
suppression
Elevating cab module with roll over protection
(ROPS)
Elevating cab module with roll over protection (ROPS)
TrenchTronic 3.0 electronic machine control with:
• Operator selectable digging pressure and
automatic operation
• Fully automatic operation
• Remote diagnostic system
Battery box and toolbox with locking door
Engine doors with security locks
Gearboxes and hydraulic tanks: pressurized with 5
psi (0.3 bar) filtered breathers
Vibration isolator mount: used on engine, radiator, oil
cooler, and exhaust silencer
Conveyor fold: hydraulic winch
Lights: 24 V forward facing
Electrical system: 24 V
Weight........................................249,124-308,649 lbs
..................................(113.000-140.000 kg)
Ground pressure..........................21.8-27 lbs/Sq Inch
...........................(1.53-1.90 kg/cm2)
Pressure and flow compensated (load sensing)
Pump flow maximum...................65 gpm (245 l/min)
Pressure setting...........................2.500 psi (172 bar)
Oil tank capacity..................................235 gal (890 l)
Trenching Dimensions
DOUBLE CHAIN NARROW BOOM
• Max depth..........................................24’ (732 cm)
• Widths range..........................28”-48” (71-122 cm)
DOUBLE CHAIN WIDE BOOM
• Max depth..........................................22’ (671 cm)
• Widths range........................40”-60” (102-152 cm)
TRIPLE CHAIN WIDE BOOM
• Max depth..........................................14’ (427 cm)
• Widths range........................54”-72” (137-183 cm)
Note: dependent on configuration and options
Engine
Model..............................................Cummins QSK 19
Max horsepower..............................760 hp (567 kW)
Max no load rpm.........................................2.100 rpm
Fuel tank capacity........................430 gal (1.630 l)
Fuel consumption......................36 gal/hr (136 l/hr)
at full load
Cooling rating adequate for 122° F (50° C)
ambient air temperature @ 8.000 ft (2.438 m) alt
Air cleaner: dry type, 2 stages with dual
pre-cleaner
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Note: dependent on configuration and options
Cross Conveyor
Trencher Drive
Hydrostatic: four pumps and two motors capable of
transmitting full engine horsepower
Flywheel gearboxes, shaved, helical gearing, case
hardened for extreme shock load
Infinitely variable digging chain speeds:
Depths............8’ through 24’ (244 cm through 732 cm)
Sectional Boom
4 operator selectable digging speed ranges:
............................................0-350 fpm (0-107 m/min)
............................................0-430 fpm (0-131 m/min)
............................................0-500 fpm (0-152 m/min)
............................................0-570 fpm (0-174 m/min)
Tailwheel diameter....................................4’ (122 cm)
Headshaft diameter..................................1’ (31.8 cm)
Cutters: rotary carbide tipped 1 ½” (3.8 cm) shank
diameter
Digging chain: 67/D9N
Crawler Drive
Dual path, hydrostatic drive, planetary transmissions
capable of full counter rotation with single lever
steering, single lever direction
Infinitely variable speed: forward and reverse
Speed ranges:
• High range.........................0-2.1 mph (3.36 km/hr)
• Low range..........................0-1.1 mph (1.76 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Tracks
Overall track length..........................15’ 11” (484 cm)
Track pad type: double or triple grouser
Track chain type: Caterpillar 245B
Track pad width.....................................2’ 6” (76 cm)
Hydrostatic: one pump and two motor
Reversible and shiftable
Belt speed infinitely variable
............................................0-900 fpm (0-275 m/min)
Discharge direction: right or left
Conveyor belt width.............................3’ 6” (107 cm)
Conveyor length.................................17’ 0” (518 cm)
or.................................21’ 0” (640 cm)
Discharge height..................................8’ 1” (246 cm)
or............................... 9’ 10” (300 cm)
Transport Dimensions
Length with boom and guard:
.......................................10 ft boom: 47’ (1.434 cm)
...................................12 ft boom: 49’ 5” (1.505 cm)
...................................14 ft boom: 51’ 9” (1.578 cm)
...................................16 ft boom: 54’ 2” (1.650 cm)
...................................18 ft boom: 56’ 6” (1.721 cm)
.................................20 ft boom: 58’ 11” (1.795 cm)
...................................22 ft boom: 59’ 8” (1.818 cm)
...................................24 ft boom: 60’ 4” (1.840 cm)
Length without boom:
only tractor with stabilizers.........40’ 11” (1.247 cm)
Width.............................................13’ 1” (398 cm)
with 30” (76 cm) track pads
Height with cab..............................13’ 1” (398 cm)
Available Devices
Work light package: 24 V, for night use
Laser control system
Hydraulic crumbshoe
Cab anti-vandalism window covers
Air compressor
Increased cooling capacity for high temperature
ambient application
Truck conveyor
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1700
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
M3 CS
TESMEC’S SMALLEST TORQUE CONVERTER EQUIPPED UNIT @ 350 HP FEATURES VERY HIGH
CHAIN PULL AND VERY LOW CHAIN SPEED. ORIENTED TOWARD TRENCHING REQUIREMENTS
IN HIGHLY ABRASIVE AND EXTREME ROCK CONDITIONS. TRENCHTRONIC 2.0 EQUIPPED.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1800
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
M3 Chainsaw
Specification
11'-2"
[340cm]
6'-1"
[186cm]
14'-8"
[447cm]
"B"
TESMEC
TESMEC
TESMEC
TESMEC
EC
TESMEC
er
TESMEC
ch
TE
SM
TESMEC
TESMEC
Trencher
Tr
en
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
Trencher
TESMEC
TESMEC
TESMEC
TESMEC
13°
TRACK
RECOIL
ADJUSTER
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
"A"
1'-7"
[49cm]
TESMEC
TESMEC
TESMEC
TESMEC
12'-6"
[381cm]
TESMEC
TESMEC
TESMEC
TESMEC
2'-0" Tracks
[61cm]
TESMEC
TESMEC
TESMEC
TESMEC
12' ft MACHINE SHOWN
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
5'-0"
[153cm]
TESMEC
TESMEC
TESMEC
Boom
“A”
“B”
6’
6’ (183 cm)
38’-0’’ (1158 cm)
8’
8’ (244 cm)
40’-6’’ (1235 cm)
10’
10’ (305 cm)
42’-4’’ (1290 cm)
12’
12’ (366 cm)
44’-7’’ (1359 cm)
Min 26" [66cm]
Max 40" [102cm]
8'-9"
[267cm]
TESMEC
TESMEC
TESMEC
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating, sound
suppression
Elevating cab module with roll over protection
(ROPS)
Load control: automatic optimal digging performance
feature
Auto stabilizers or adjustable bern scrapers on
chainsaw models (optional)
Tool box/battery box with locking door
Engine doors with security locks
Fuel and hydraulic tank: aircraft quality locking caps
Stabilizers / dirt drags: automatically adjust to terrain
changes.
Lights: 24 V forward facing
Digging chain boom top roller
Hydraulic digging chain adjustment
Vibration isolator mount: used on engine, radiator
and oil cooler
Conveyor fold: hydraulic winch
Electrical system: 24 V starting, 24 V controls
Weight.........95,000-135,000 lbs(43.091-61.235 kg)
Pressure and flow compensated (load sensing)
Pump flow maximum...................45 gpm (170 l/min)
Pressure setting...........................2.750 psi (189 bar)
Oil tank capacity.....................................97 gal (367 l)
Trenching Dimensions
Depths 6’ through 12’ (183 cm through 366 cm)
Depths:
....................26”-40” (66-102 cm) max 6’ (183 cm)
....................26”-40” (66-102 cm) max 8’ (244 cm)
..................26”-40” (66-102 cm) max 10’ (305 cm)
..................26”-40” (66-102 cm) max 12’ (366 cm)
Cut widths: double chain
Note: dependent on configuration and options
Model.........................................CAT C9 ACERT Tier 3
Max horsepower..............................350 hp (261 kW)
Max no load rpm........................................2.100 rpm
Fuel tank capacity........................300 gal (1.136 l)
Fuel consumption..................18.6 gal/hr (70.4 l/hr)
at full load
Cooling rating adequate for 130° F (54.4° C)
ambient air temperature
Air cleaner: dry type, centrifugal pre-cleaner
with primary and secondary filters
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Trencher Drive
This powertrain is comprised of several
components: an electronically controlled
transmission driving a heavy-duty differential,which
transmits power to the headshaft via sprockets and
multi-strand roller chain
Five operator selectable digging speed ranges:
..................................1st: 115-157 fpm (35-48 m/min)
.................................2nd: 151-206 fpm (46-63 m/min)
.................................3rd: 211-288 fpm (64-88 m/min)
...............................4th: 288-394 fpm (88-120 m/min)
.............................5th: 412-562 fpm (126-171 m/min)
Cutters: rotary carbide tipped 1 ½” (3.81 cm) shank
diameter
Chain option: 54/345
Note: chain speed are “as calculated” per a set-point
horsepower output and may vary accordingly
Crawler Drive
Dual path, hydrostatic drive, planetary transmissions
capable of full counter rotation with single lever
steering, single lever direction
Infinitely variable speed: forward and reverse
Speed ranges:
• High range......................0-1.7 mph (0-2.72 km/hr)
• Low range....................0-0.85 mph (0-1.36 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Tracks
Engine
Tesmec S.p.A.
Note: dependent on configuration and options
Overall track length c/c......................12’ 6” (381 cm)
Track pad type: single, double or triple grouser
Track chain type: Caterpillar D6
Track pad width...........................................2’ (61cm)
Transmission
Model: caterpillar
Oil filter: 6 micron paper cartridge integral filter
Electronically controlled utilizing (5)digging speeds
Capacity (refill).....................................10 gal (38 l)
Cross Conveyor
Hydrostatic: one pump and two motors
Reversible and shiftable
Belt speed infinitely variable
.......................................0-1.000 fpm (0-305 m/min)
Discharge direction: right or left
Conveyor belt width............................2’ 6” (76.2 cm)
Conveyor length.................................12’ 4” (376 cm)
Discharge height..................................6’ 1” (186 cm)
Transport Dimensions
Length with crumbshoe:
6 ft boom: 38’ 0” (1158 cm)
8 ft boom: 40’ 6” (1235 cm)
10 ft boom: 42’ 4” (1290 cm)
12 ft boom: 44’ 7” (1359 cm)
Width..............................................87’ 6’’(267 cm)
with 24” (61 cm) track pads
Height with cab................................8’ 9” (340 cm)
Height with cab elevated ...............14’ 8” (447 cm)
Height..................................................11’ 2” (340 m)
over cab with single grouser pads
over crumbshoe cylinder...................11’ 8” (360 cm)
Available Devices
Work light package: 24 V, for night use
Laser control system pre-wire
Hydraulic crumbshoe
Cab anti-vandalism window covers
Air compressor
Stabilizers or adjustable bern-scrapers
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1800
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
M5 CS
TESMEC’S LARGEST TORQUE CONVERTER EQUIPPED UNIT @ 440 HP FEATURES INDUSTRY
LEADING HIGH CHAIN PULL AND VERY LOW CHAIN SPEED. ORIENTED TOWARD TRENCHING
REQUIREMENTS IN HIGHLY ABRASIVE AND EXTREME ROCK CONDITIONS. TRENCHTRONIC
1.0 EQUIPPED.
powered by
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1900
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
M5 Chainsaw
Specification
BP
TE
er
TESMEC
BP
CAT 54/345
DIGGING
LINK
BP
CAT 54/345
CAT 54/345
DIGGING
DIGGING
Trencher
LINK
BP
CAT 54/345
CAT 54/345
DIGGING
DIGGING
LINK
BP
CAT 54/345
CAT 54/345
DIGGING
DIGGING
LINK
BP
CAT 54/345
CAT 54/345
DIGGING
DIGGING
LINK
CAT 54/345
DIGGING
BP
CAT 54/345
DIGGING
LINK
BP
CAT 54/345
DIGGING
DIGGING
TESMEC
LINK
CAT 54/345
DIGGING
BP
CAT 54/345
DIGGING
TESMEC
CAT 54/345
DIGGING
BP
CAT 54/345
DIGGING
LINK
BP
CAT
54/345
DIGGING
LINK
CAT 54/345
TESMEC
CAT 54/345
DIGGING
DIGGING
LINK
BP
DIGGING
54/345
CAT
TESMEC
CAT 54/345
DIGGING
LINK
LINK
54/345
DIGGING
54/345
DIGGING
BP
CAT
LINK
CAT
DIGGING
54/345
DIGGING
BP
CAT
54/345
TESMEC
DIGGING
LINK
CAT
6'-9"
[206cm]
13'-11"
[424cm]
DIGGING
DIGGING
DIGGING
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
TESMEC
CAT 54/345
11'-6"
[351 cm]
11'-10"
[361cm]
CAT 54/345
BP
CAT 54/345
BP
CAT 54/345
Tr
en
SM
TESMEC
TESMEC
TESMEC
TESMEC
ch
EC
"B"
Trencher
LINK
TESMEC
LINK
CAT 54/345
DIGGING
LINK
DIGGING
LINK
CAT 54/345
CAT 54/345
DIGGING
DIGGING
54/345
CAT
BP
54/345
DIGGING
LINK
CAT
CAT 54/345
DIGGING
LINK
CAT 54/345
BP
DIGGING
DIGGING
DIGGING
CAT 54/345
13°
TESMEC
CAT 54/345
CAT 54/345 DIGGING LINK
CAT 54/345 DIGGING BP
TESMEC
CAT 54/345
CAT
DIGGING
54/345
LINK
DIGGING
LINK
CAT 54/345
TESMEC
BP
TESMEC
TESMEC
CAT 54/345
DIGGING
BP
CAT 54/345
DIGGING
LINK
TESMEC
CAT 54/345
DIGGING
BP
LINK
TESMEC
CAT 54/345
TRACK
RECOIL
ADJUSTER
CAT 54/345
DIGGING
BP
DIGGING
DIGGING
LINK
54/345
CAT
BP
TESMEC
CAT 54/345
CAT 54/345
DIGGING
DIGGING
DIGGING
LINK
BP
54/345
CAT
TESMEC
CAT 54/345
TESMEC
DIGGING
BP
LINK
DIGGING
TESMEC
CAT 54/345
CAT
DIGGING
54/345
BP
CAT 54/345
TESMEC
CAT 54/345
DIGGING
LINK
CAT 54/345 DIGGING
DIGGING
LINK
BP
TESMEC
CAT 54/345
DIGGING
BP
BP
DIGGING
CAT
CAT 54/345
TESMEC
DIGGING
54/345
BP
CAT 54/345
TESMEC
TESMEC
DIGGING
BP
CAT 54/345
TESMEC
CAT 54/345 DIGGING
DIGGING
BP
BP
TESMEC
TESMEC
TESMEC
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
LINK
TESMEC
1'-8"
[51cm]
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
LINK
TESMEC
TESMEC
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
LINK
TESMEC
CAT
54/345
DIGGING
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
LINK
TESMEC
TESMEC
BP
CAT
54/345
DIGGING
BP
CAT
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
LINK
LINK
TESMEC
DIGGING
TESMEC
54/345
CAT
54/345
DIGGING
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
TESMEC
LINK
TESMEC
BP
CAT
54/345
DIGGING
TESMEC
BP
4'-4"
[132cm]
CAT
54/345
DIGGING
BP
TESMEC
CAT
54/345
DIGGING
CAT
54/345
DIGGING
BP
CAT
54/345
TESMEC
DIGGING
LINK
TESMEC
BP
CAT
54/345
DIGGING
CAT
54/345
DIGGING
BP
CAT
54/345
TESMEC
DIGGING
LINK
TESMEC
BP
CAT
54/345
CAT
DIGGING
CAT
54/345
DIGGING
BP
CAT
54/345
TESMEC
DIGGING
LINK
LINK
DIGGING
TESMEC
BP
54/345
CAT
54/345
DIGGING
CAT
BP
54/345
CAT
54/345
DIGGING
BP
CAT
54/345
DIGGING
TESMEC
LINK
LINK
TESMEC
DIGGING
CAT
13'-3"
[404cm]
54/345
DIGGING
CAT
BP
54/345
CAT
"A"
CAT
54/345
DIGGING
BP
CAT
54/345
DIGGING
TESMEC
LINK
LINK
TESMEC
DIGGING
54/345
CAT
DIGGING
BP
54/345
LINK
TESMEC
DIGGING
CAT
54/345
DIGGING
BP
CAT
54/345
DIGGING
LINK
TESMEC
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
CAT
54/345
DIGGING
CAT
BP
54/345
DIGGING
LINK
TESMEC
TESMEC
LINK
CAT
54/345
10'-7"
[323cm]
14' ft MACHINE SHOWN
2'-6"
[76cm]
CAT
DIGGING
BP
54/345
DIGGING
CAT
54/345
DIGGING
BP
CAT
54/345
DIGGING
LINK
TESMEC
TESMEC
LINK
CAT
54/345
DIGGING
CAT
54/345
DIGGING
CAT
BP
54/345
DIGGING
LINK
TESMEC
TESMEC
BP
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
LINK
CAT
54/345
CAT
DIGGING
BP
54/345
DIGGING
LINK
TESMEC
TESMEC
CAT
54/345
DIGGING
BP
54/345
DIGGING
BP
CAT
54/345
DIGGING
LINK
TESMEC
TESMEC
DIGGING
BP
54/345
DIGGING
CAT
54/345
CAT
CAT
LINK
CAT
TESMEC
54/345
DIGGING
LINK
TESMEC
DIGGING
CAT 54/345
DIGGING
BP
54/345
DIGGING
CAT
54/345
BP
CAT
LINK
CAT 54/345
DIGGING
LINK
TESMEC
CAT
54/345
DIGGING
CAT
CAT 54/345 DIGGING
LINK
CAT 54/345 DIGGING
TESMEC
BP
TESMEC
BP
54/345
DIGGING
BP
LINK
DIGGING
DIGGING
54/345
CAT
CAT
DIGGING
BP
54/345
DIGGING
CAT
54/345
54/345
CAT
TESMEC
BP
TESMEC
LINK
“A”
“B”
6’
6’ (183 cm)
39’-7’’ (1206 cm)
8’
8’ (244 cm)
41’-11’’ (1278 cm)
10’
10’ (305 cm)
44’-1’’ (1344 cm)
12’
12’ (366 cm)
46’-11’’ (1430 cm)
14’
14’ (427 cm)
49’-1’’ (1496 cm)
16’
16’ (488 cm)
49’-2’’ (1499 cm)*
DIGGING
LINK
TESMEC
Boom
CAT
54/345
54/345
CAT
BP
CAT
DIGGING
54/345
DIGGING
LINK
DIGGING
CAT
TESMEC
CAT
TESMEC
54/345
BP
LINK
54/345
DIGGING
DIGGING
CAT
LINK
54/345
CAT 54/345 DIGGING LINK
CAT
54/345
DIGGING
BP
BP
DIGGING
CAT
54/345
TESMEC
CAT
TESMEC
54/345
DIGGING
BP
CAT 54/345 DIGGING BP
TESMEC
TESMEC
* Boom 16’ W/O crumbshoe
Min 30" [76.2cm]
Max 42" [107cm]
9'-10"
[300cm]
(24" [61cm] PADS)
10'-4"
[315cm]
(30" [76cm] PADS)
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Pressurized cab with air conditioning, heating, sound
suppression
Elevating cab module with roll over protection
(ROPS)
Load control: automatic optimal digging performance
feature
Battery box and toolbox with locking door
Hydraulic tank: pressurized with 5 psi (0.30 bar)
filtered breathers
Vibration isolator mount: used on engine, radiator, oil
cooler, and exhaust silencer
Stabilizers / dirt drags: automatically adjust to terrain
changes
Lights: 24 V forward facing
Digging chain boom top roller
Hydraulic digging chain adjustment
Electrical system: 24 V starting, 24 V controls
Weight.....140,000-161,000 lbs (63.502-73.028 Kg)
Pressure and flow compensated (load sensing)
Pump flow maximum...................45 gpm (170 l/min)
Pressure setting...........................2.500 psi (172 bar)
Oil tank capacity.....................................97 gal (367 l)
Trenching Dimensions
Depths 6’ through 16’ (183 cm through 488 cm)
Depths:
......................30”-42” (76-107 cm) max 6’ (183 cm)
......................30”-42” (76-107 cm) max 10’ (305 cm)
......................30”-42” (76-107 cm) max 14’ (427 cm)
.....................30”-36” (76-91.5 cm) max 16’ (488 cm)
Cut widths based on 14” chain centers
Engine
Model.......................................CAT C13 ACERT Tier 3
Max horsepower..............................440 hp (328 kW)
Max no load rpm........................................2.100 rpm
Fuel tank capacity........................405 gal (1.533 l)
Fuel consumption.....................22.7 gal/hr (86 l/hr)
at full load
Cooling rating adequate for 122° F (50° C)
ambient air temperature
Air cleaner: dry type, centrifugal pre-cleaner with
primary and secondary filters
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Note: weight calculations based on Cat chain with
1 ¾” baseplates
Trencher Drive
This powertrain is comprised of several
components: an electronically controlled
transmission driving a heavy-duty differential,
which transmits power to the headshaft via
sprockets and multi-strand roller chain
Four operator selectable digging speed ranges:
....................................1st: 98-197 fpm (30-60 m/min)
.................................2nd: 129-259 fpm (39-79 m/min)
...............................3rd: 180-361 fpm (55-110 m/min)
...............................4th: 246-492 fpm (75-150 m/min)
Cutters: rotary carbide tipped 1 ½” (3.81 cm) shank
diameter
Note: chain speed are “as calculated” per a set-point
horsepower output and may vary accordingly
Crawler Drive
Dual path, hydrostatic drive, planetary transmissions
capable of full counter rotation with single lever
steering, single lever direction
Infinitely variable speed: forward and reverse
Speed ranges:
• High range......................0-2.4 mph (0-3.84 km/hr)
• Low range......................0-1.3 mph (0-2.08 km/hr)
Integral parking and service brake: spring applied,
hydraulic release, wet disc brake
Tracks
Overall track length ...........................13’ 3” (404 cm)
Track pad type: single, double or triple grouser
Track chain type: Caterpillar D7
Track pad width.......................................30” (76 cm)
Transmission
Model: caterpillar
Oil filter: 6 micron paper cartridge integral filter
Electronically controlled utilizing (5)digging speeds
Capacity (refill).....................................10 gal (38 l)
Cross Conveyor
Hydrostatic: one pump and two motors
Reversible and shiftable
Belt speed infinitely variable
.......................................0-1.000 fpm (0-305 m/min)
Discharge direction: right or left
Conveyor belt width............................2’ 6” (76.2 cm)
Conveyor length.................................12’ 9” (389 cm)
Discharge height..................................6’ 9” (206 cm)
Transport Dimensions
Length without crumbshoe:
.....................................6 ft boom: 39’ 7” (1.206 cm)
...................................8 ft boom: 41’ 11” (1.278 cm)
...................................10 ft boom: 44’ 1” (1.344 cm)
.................................12 ft boom: 46’ 11” (1.430 cm)
...................................14 ft boom: 49’ 1” (1.496 cm)
...................................16 ft boom: 49’ 2” (1.499 cm)
without crumbshoe (non available for 16’ boom)
Widths:
.........16’ 4” (315 cm) with 30” (76 cm) track pads
.........9’ 10” (300 cm) with 24” (61 cm) track pads
Height with cab..............................11’ 6” (351 cm)
Height with cab elevated .............13’ 11” (424 cm)
Height with crumbshoe...................11’ 10” (361 cm)
Available Devices
Work light package: 24 V, for night use
Laser control system pre-wire
Hydraulic crumbshoe
Cab anti-vandalism window covers
Air compressor
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
1900
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
800
HIGH-MOBILITY OFF-ROAD TRUCK (4WD) EQUIPPED WITH BUCKET CHAIN ATTACHMENT,
SPECIALLY DESIGNED TO BE EMPLOYED IN DIRT AND SOFT ROCK EXCAVATION.
RADIO-REMOTE CONTROLLED MACHINE. CENTRAL TIRE INFLATION SYSTEM (CTIS) THAT
PERMITS TO CONTROL TIRES PRESSURE FROM THE CAB. THE 800 CAN CUT TRENCHES UP
TO 6’ 7” (200 CM) DEEP AND 2’ 11” (90 CM) WIDE.
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
2000
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
800 Wheeled Trencher
Specification
9'-8"
[294cm]
~27'-11"
[851cm]
9'-11"
[302cm]
10'-5"
[318cm]
9'-11"
[302cm]
12'-8"
[385cm]
32'-10"
[1001cm]
8'-2"
[250cm]
7'-3"
[221cm]
31'-5"
[956cm]
12'-6"
[380cm]
5'-5"
[166cm]
13'-1"
[400cm]
1'-11"
[58cm]
1'-11"
[58cm]
13'-1"
[400cm]
7'-7"
[230cm]
35°
35°
8'-2"
[250cm]
7'-3"
[221cm]
5'-5"
[166cm]
1'-11"
[58cm]
6'-7"
[200cm]
35°
7'-10"
[239cm]
9'-11"
[302cm]
7'-5"
[225cm]
36"
[91 cm]
Standard Features
Operating and Transport Weight
Hydraulic Transmission
Three seats cab, air conditioned and pressurized
Remote control system for digging operations,
with full control in steering and translation
Load control
Heavy duty axels
High tensile steel frame
Working lights
Electrical system: 24 V
Weight...............................47,400 lbs (21.500 kg)
Oil tank capacity..............................105 gal (400 l)
Trenching Dimensions
Digging depth...................2’ - 6’ 7’’ (61-200 cm)
Digging width...............................2’ 11’’ (91 cm)
Note: dependent on configuration and options
Cross Conveyor
Trencher Drive
Hydrostatic: two variable displacement pumps
and one radial piston motor
Digging chain speed: selectable 3 speeds
Chain: double chain with buckets
Digging teeth: ¾” shank diameter, rotary carbide
insert
Powershift
Model: ZF 6WG261
Speeds: 6 forward, 1 reverse
Torque converter
Engine
Model................................................CAT C9 Tier 3 Lock-up
Max horsepower.........................350 hp (261 kW) Wheels Drive
Max no load rpm...................................2.100 rpm ROAD: selectable 2WD & 4WD, up to 50 mile/h
Fuel tank capacity........................132 gal (500 l) (80 km/h)
Cooling rating adequate for 122° F (50° C)
DIGGING: hydrostatic drive (4WD), infinite speed
ambient air temperature
from 0 to 656 ft/h (0-200 m/h)
Air cleaner: dry type, 2 stage with pre-cleaner
Oversized low pressure tires (16.00 x 25)
Alternator: 140A, 24 V
Note: dependent on configuration and options
Discharge direction: right or left
Belt speeds: 7
Belt length...................................16’ 11’’ (515 cm)
Belt width...............................................2’ (61 cm)
Transport Dimensions
Length......................................32’ 10” (1.001 cm)
Width.................................................8.2’ (250 cm)
Height............................................10’ 5” (318 cm)
Available Devices
Central tire inflation system (CTIS)
Camera monitor system, 7” TFT display & up to
4 heavy duty cameras
Suspension
Hydro-pneumatic suspensions system
Self- leveling
Slope-control
Tesmec S.p.A.
Headquarters
Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy
Tel: +39.035.4232911 - Fax: +39.035.335664
Ed. 2013/11
Tesmec USA Inc.
12520 East FM 917 - Alvarado, Texas 76009 - USA
Tel: +1.817.4732233 - Toll free: 800.8515102
Fax: +1.817.4739742
Keep you updated on:
www.tesmec.com
2000
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE