LAYERS - Florim USA

e made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAmade in USA An italian tile made in USA A
MODERATE VARIATION
While the colors present on a single
piece of tile will be indicative of the
colors to be expected on the other
tiles, the amount of colors on each
piece will vary significantly
RECYCLED CONTENT:
10% - AGGREGATE,
CHALK, SEDIMENT
40% - OBSIDIAN
LAYERS
An elegant assortment of gentle hues surrounding you with modernity and style; Aggregate,
Chalk, Obsidian, and Sediment are contemporary colors that can be mixed to create an
impressive multicolor background for commercial and residential settings. This collection
draws inspiration from natural lines of drift. Those paths across terrain that create the least
amount of resistance; those paths that offer the greatest ease while taking into account
obstacles. Layers, the inspirational flooring choice.
PRODUCT FEATURES
aggregate
Layers offers the look of a linear travertine created with Color Body Porcelain and
High Definition Graphics. One of the many attributes of the Layers product is the
design versatility. You can combine the 4 colors of Layers together to create incredible
spaces. Layers has 10% recycled content for Aggregate, Chalk and Sediment colors
and 40% for Obsidian. Coordinated cove bases are available.
12”x24”
Mosaic 12”x12”
12”x12”
Listello Mosaic 12”x12”
chalk
6”x24”
obsidian
3”x12” Bullnose
Cove Base 6”x12”
Outside Corner 1”x6” Inside Corner 1”x6”
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED.
PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
F MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16”) IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED
BRICK PATTERN WITH 1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
TECHNICAL SPECIFICATIONS - COLOR BODY PORCELAIN
sediment
Surface Abrasion
Water Absorption
Chemical Resistance
Dynamic Coefficient of Friction
Stain Resistance
Breaking Strength
Resistance to freeze
Scratch Hardness
PEI
IV
≤ 0.5%
NOT AFFECTED
≥ 0.42 F
NOT AFFECTED
≥ 400
RESISTANT
≥8
ASTM C1027
ASTM C373
ASTM 650
ANSI 137.1
ASTM C1378
ASTM C648
ASTM C1026
MOHS
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
F DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY
WITHIN AND BETWEEN PRODUCT RUNS.
e made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAmade in USA An italian tile made in USA A
alian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian
MODERATE VARIATION
While the colors present on a single
piece of tile will be indicative of the
colors to be expected on the other
tiles, the amount of colors on each
piece will vary significantly
RECYCLED CONTENT:
10% - AGGREGATE,
CHALK, SEDIMENT
40% - OBSIDIAN
FLORIM
USA
LAYERS
LAYERS
Contractor Board
(9”x11”) - $5.00 each
An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian
made
the USA
An Italian
tile made
in the
USAin
An italian
tile made
in USA
Antileitalian
tilein
made
in USA
An italian
tile made
in the
USAUSA
An Italian
tile made
in the
USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAin USA An italian tile made in USA
FLORIM
USA
Moderate to heavy foot traffic
PROGRESS THAT TOUCHES PEOPLE AND INVESTS IN THE ENTIRE SOCIETY
As an active member of the U.S. Green Building Council, Florim promotes awareness in the American community of a greener
tomorrow by encouraging the use of building solutions inspired by environmentally friendly practices. Using Florim products in
building projects will contribute to the attainment of scores and points required for LEED certification (Leadership in Energy and
Environmental Design).
Recommended for all residential applications as well as medium commercial and light institutional
applications.
A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR RESPONSIBLE AND SUSTAINABLE BUILDING
Florim offers products containing recycled material. The adoption of ecologically compatible production systems emerges from
Italian designs produced in the U.S.A.
SUGGESTED INSTALLATIONS
LAYERS
PEI Class
IV
TECHNICAL DEVELOPMENT THAT RESPECTS THE NATURAL ENVIRONMENT
Florim is committed to eco-sustainable projects, as reflected in avant-garde production processes that minimize the impact on the
environment.
COLOR-BODY PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
FLORIM
USA
COLOR-BODY PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
6”X24” - 12”X24” - 24”X24” - 12”X12” - MOSAICS
TRIMS: BULLNOSE - COVE BASE - INSIDE/OUTSIDE CORNERS
FLOOR / WALL
SHADE VARIATION : V2
THICKNESS: 10MM (11MM, 24”X24”)
LAYERS
An italian tile made in USA
701822
COLOR-BODY PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
24”x24” - 12”x24” - 6”x24” - 12”x12” - mosaics - cove base - bullnose
24”x24” - 12”x24” - 6”x24” - 12”x12” - mosaics - trims
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile
FLORIM
USA
LAYERS
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”x24” - 24”x24” - 12”x12” - mosaics
TRIMS: bullnose - cove base - inside/outside corners
FLOOR / WALL
FLORIM
USA
Chalk
SEDIMENT
1094433 - 2”x2”
Mosaic (12”x12”)
Sediment
V2
SLIGHT VARIATION
Chalk
V2
SLIGHT VARIATION
COLOR SPECIFICATIONS AND SIZES AVAILABLE
Nominal Size
24”x24”
12”x24”
6”x24”
12”x12”
2”x2” Mosaic (12”x12”)
12”x12” Listello Mosaic
6”x12” Cove Base
1”x6” Inside Corner
1”x6” Outside Corner
3”x12” Bullnose
1094421 - 12”x24”
1094423 - 12”x24”
1094497 - 6”x24”
1094495 - 6”x24”
1094427- 24”x24”
1094425 - 24”x24”
NOMINAL SIZE
1094419 - 12”x12”
1094439
6”x12”
Cove Base
1094492
12”x12” Listello Mosaic
1094447
1”x6” Outside
Corner
1094417 - 12”x12”
1094435 - 2”x2”
Mosaic (12”x12”)
1094431
3”x12” Bullnose
1094443
1”x6” Inside
Corner
1094437
6”x12”
Cove Base
1094490
12”x12” Listello Mosaic
1094445
1”x6” Outside
Corner
1094441
1”x6” Inside
Corner
CHALK
SEDIMENT
1094425
1094421
1094495
1094417
1094433
1094490
1094437
1094441
1094445
1094429
AGGREGATE
1094427
1094423
1094497
1094419
1094435
1094492
1094439
1094443
1094447
1094431
OBSIDIAN
1094424
1094420
1094494
1094416
1094432
1094489
1094436
1094440
1094444
1094428
1094426
1094422
1094496
1094418
1094434
1094491
1094438
1094442
1094446
1094430
PACKAGING
24”x24”
12”x24”
6”x24”
12”x12”
2”x2” Mosaic (12”x12”)
12”x12” Listello Mosaic
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
1094433 - 2”x2”
Mosaic (12”x12”)
METRIC
(CM)
THICKNESS
(MM)
PIECES PER BOX
SQ. FT PER BOX
WEIGHT PER BOX
UM PER
PALLET
WEIGHT PER PALLET
60x60
30x60
30x60
30x30
30x30
30x30
15x30
2.5x15
2.5x15
7.5x30
11 mm
10 mm
10 mm
10 mm
10mm
10mm
8 mm
8 mm
8 mm
10 mm
3
6
12
13
10
10
10
4
4
12
12
12
12
13
10
10
5
.16
.16
3
58
52.8
52.8
55.3
39
39
17.5
1
1
12.7
432
576
576
624
450
450
2016
2133
2589
2589
2709
1805
1805
2189
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED.
PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
1094429
3”x12” Bullnose
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2
PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
TECHNICAL SPECIFICATIONS
Aggregate
V2
SLIGHT VARIATION
Obsidian
V2
Surface Abrasion
Water Absorption
Chemical Resistance
SLIGHT VARIATION
Coefficient of Friction
PEI
IV
≤ 0.5%
CLASS A
(Dry)
(Wet)
≥ 0.78 ✦
≥ 0.68 ✦
CLASS A
≥ 400
RESISTANT
≥8
Stain Resistance
Breaking Strength
Resistance to freeze
Scratch Hardness
Nominal Size
24”x24”
12”x24”
12”x12”
2”x2” Mosaic (12”x12”)
6”x12” Cove Base
1”x6” Inside Corner
1”x6” Outside Corner
3”x12” Bullnose
NOMINAL SIZE
CHALK
HOW TO MAINTAIN
YOUR PORCELAIN TILE
• Sweep or vacuum regularly.
• Wash with a household
cleaner and hot water then
rinse with clean water (do
not use wax, oil-based,
or abrasive cleaners).
OBSIDIAN
AGGREGATE
1094436
6”x12”
Cove Base
1094489
12”x12” Listello Mosaic
1094444
1”x6” Outside
Corner
1094440
1”x6” Inside
Corner
1094432 - 2”x2”
Mosaic (12”x12”)
1094428
3”x12” Bullnose
1094418 - 12”x12”
1094438
6”x12”
Cove Base
1094491
12”x12” Listello Mosaic
1094446
1”x6” Outside
Corner
1094442
1”x6” Inside
Corner
60x60
30x60
30x30
30x30
1094447
1”x6” Outside
Corner
1094429
3”x12” Bullnose
Aggregate
1094426
1094422
1094418
1094434
1094438
1094442
1094446
1094430
UM PER
PALLET
WEIGHT PER PALLET
432
576
624
450
2133
2589
2709
1900
11 mm
11 mm
10 mm
10mm
3
6
13
10
12
12
13
10
58
52.8
55.3
45
15x30
2.5x15
2.5x15
8 mm
8 mm
8 mm
10
4
4
5
.16
.16
17.5
1
1
-
-
7.5x30
10 mm
12
3
12.7
2016
2189
1094432 - 2”x2”
Mosaic (12”x12”)
Obsidian
V2
1094444
1”x6” Outside
Corner
1094443
1”x6” Inside
Corner
1094439
6”x12”
Cove Base
1094431
3”x12” Bullnose
V2
SLIGHT VARIATION
1094440
1”x6” Inside
Corner
1094436
6”x12”
Cove Base
Coefficient of Friction
PEI
IV
≤ 0.5%
CLASS A
(Dry)
(Wet)
0.60 ✦
0.60 ✦
CLASS A
> 400
RESISTANT
≥6
Stain Resistance
Breaking Strength
Resistance to freeze
Scratch Hardness
ASTM C1027
ASTM C373
ASTM 650
ASTM C1028
ASTM C1028
ASTM C1378
ASTM C648
ASTM C1026
MOHS
1094434 - 2”x2”
Mosaic (12”x12”)
1094446
1”x6” Outside
Corner
1094442
1”x6” Inside
Corner
1094438
6”x12”
Cove Base
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
UNIFORM APPEARANCE
V2
Differences among pieces from the same
production run are minimal.
MODERATE VARIATION
*
*
V3
WITHIN AND BETWEEN PRODUCT RUNS.
SLIGHT VARIATION
Clearly distinguishable differences in texture
and/or pattern with similar colors.
Find more care, maintenance, and installation tips at
www.florimusa.com.
RECYCLED CONTENT:
10% - AGGREGATE, CHALK, SEDIMENT
40% - OBSIDIAN
SUBSTANTIAL VARIATION
While the colors present on a single piece
of tile will be indicative of the colors to be
expected on the other tiles, the amount of
colors on each piece will vary significantly.
*
V4
Random color differences from tile to tile,
so that one tile may have totally different
colors from that on other tiles. Thus, the
final installation will be unique.
1094428
3”x12” Bullnose
SLIGHT VARIATION
✦ DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY
1094434 - 2”x2”
Mosaic (12”x12”)
1094430
3”x12” Bullnose
24”x24”
12”x24”
12”x12”
2”x2” Mosaic (12”x12”)
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
WEIGHT PER BOX
1094437
6”x12”
Cove Base
OBSIDIAN
1094424
1094420
1094416
1094432
1094436
1094440
1094444
1094428
SQ. FT PER BOX
1094441
1”x6” Inside
Corner
SLIGHT VARIATION
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED.
PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
Surface Abrasion
Water Absorption
Chemical Resistance
Colors Shown in this brochure may vary from actual product.
Final selection should be made from actual product samples.
1094426 - 24”x24”
V1
1094416 - 12”x12”
AGGREGATE
1094427
1094423
1094419
1094435
1094439
1094443
1094447
1094431
PIECES PER BOX
TECHNICAL SPECIFICATIONS
Find more care, maintenance, and installation tips at
www.florim.com
✦ DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY
WITHIN AND BETWEEN PRODUCT RUNS.
1094496 - 6”x24”
SEDIMENT
THICKNESS
(CM)
V2
SEDIMENT
300 International Blvd.
Clarksville, TN 37040
Toll free: 877 - Florim1 (356-7461)
tel. 931 645 5100
FLOOR AND WALL
Tiles with styling and sizes suitable
for both floors and walls.
www.florimusa.com
CONSUMERS SHOULD LOOK AT MULTIPLE PIECES OF TILE TO REALIZE THE FULL COLOR SPECTRUM OF THIS PRODUCT
&,//2
!.$7!,,
OBSIDIAN
AGGREGATE
V2
SLIGHT VARIATION
Clearly distinguishable differences in texture and/or pattern with similar colors.
1094430
3”x12” Bullnose
701847 - June 2010
1094424 - 24”x24”
CHALK
1094425
1094421
1094417
1094433
1094437
1094441
1094445
1094429
METRIC
(CM)
1094445
1”x6” Outside
Corner
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH
1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
SHADE VARIATION
1094494 - 6”x24”
1094435 - 2”x2”
Mosaic (12”x12”)
COLOR SPECIFICATIONS AND SIZES AVAILABLE
PACKAGING
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
1094422 - 12”x24”
1094420 - 12”x24”
ASTM C1027
ASTM C373
ASTM 650
ASTM C1028
ASTM C1028
ASTM C1378
ASTM C648
ASTM C1026
MOHS
WHY PORCELAIN?
There are many reasons to
choose impervious porcelain
tile over other floor coverings. It
offers the largest array of design
options and holds its value the
longest.
In a comparison between the
many different flooring options,
porcelain tile offers one of the
most durable and least expensive options over the lifespan of the
building.
Benefits of Porcelain Tile
• Impervious to water
• Easy to maintain
• Variety of design options
• Environmentally friendly
• Resistant to germs and bacteria
• Fade resistant
• Fire resistant
• Durable - best long-term
value vs. other floor coveings
SLIGHT VARIATION
24”x24” - 12”x24” - 12”x12” - 2”x2” mosaic - cove base - trims
CHALK
Sediment
V2
GLAZED POR C E L AIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
LAYERS
701822 - March 2010
Sample Board
(25”x25”)
701847
$11.00
AVAILABLE IN
ALL COLORS
3”x12”
Bullnose
6”x12”
Cove Base
1”x6”
1”x6”
Inside Corner Outside Corner
877-Florim1 (356-7461) - www.florimusa.com
8 Page Brochure (8 ½”x11”) - $0.75 each
701820
Architect Binder (8 ¾”x11”) - $15.00 each
701823
9
GLAZED
PORCELAIN
A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR A CONSCIOUS BUILDING TRADE
Florim offers products containing recycled material. The adoption of eco-compatible production systems is merit of Italian designs produced in the U.S.
FLOOR TILE
24”x24”
12”x24”
12”x12”
Mosaics
Cove Base
Trims
TECHNICAL DEVELOPMENT THAT CONSIDERS THE NATURAL ENVIRONMENT
Florim commits to the eco-compatible project and translates the same into an avant-guard production process,
minimizing the negative impact on the environment.
Chalk
V2
Sediment
V2
Sediment
SLIGHT VARIATION
LAYERS
LAYERS
WHY PORCELAIN?
COLOR SPECIFICATIONS AND SIZES AVAILABLE
CHALK
SEDIMENT
AGGREGATE
OBSIDIAN
1094425
1094421
1094417
1094433
1094437
1094441
1094445
1094429
1094427
1094423
1094419
1094435
1094439
1094443
1094447
1094431
1094424
1094420
1094416
1094432
1094436
1094440
1094444
1094428
1094426
1094422
1094418
1094434
1094438
1094442
1094446
1094430
Nominal Size
An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA
made in USA An italian tile made in USA An italian tile made in USA
24”x24”
12”x24”
12”x12”
2”x2” Mosaic (12”x12”)
6”x12” Cove Base
1”x6” Inside Corner
Outside Corner
3”x12” Bullnose
SLIGHT VARIATION
1”x6”
There are many reasons to choose
impervious porcelain tile over other floor
coverings. It offers the largest array of
design options and holds its value the
longest. In a comparison between the
many different flooring options, porcelain
tile offers one of the most durable and
least expensive options over the lifespan
24” x24”
of the building.
Benefits of Porcelain Tile
• Impervious to water
• Easy to maintain
• Variety of design options
• Environmentally friendly
• Resistant to germs and bacteria
• Fade resistant
• Fire resistant
- best long-term value vs.
Chalk• Durable
other floor coverings
PACKAGING
NOMINAL SIZE
24”x24”
12”x24”
12”x12”
2”x2” Mosaic (12”x12”)
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
UM PER
PALLET
WEIGHT PER PALLET
432
576
624
450
2133
2589
2709
1900
METRIC
(CM)
THICKNESS
(CM)
60x60
30x60
30x30
30x30
11 mm
11 mm
10 mm
10mm
3
6
13
10
12
12
13
10
58
52.8
55.3
45
8 mm
8 mm
8 mm
10
4
4
5
.16
.16
17.5
1
1
-
-
10 mm
12
3
12.7
2016
2189
15x30
2.5x15
2.5x15
7.5x30
PIECES PER BOX
SQ. FT PER BOX
WEIGHT PER BOX
701823 - March 2010
PROGRESS THAT TOUCHES AND INVESTS IN THE ENTIRE SOCIETY
As a active member of the U.S Green Building Council, Florim spreads awareness to the entire American communities
and encourages towards the use of building solutions inspired by environmentally friendly practices.
Using Florim products for project implementation, will positively contribute in obtaining scores and points required for earning the LEED certification
(Leadership in Energy and Environmental Design).
9
GLAZED
PORCELAIN
HOW TO MAINTAIN YOUR
PORCELAIN TILE
hot water then rinse with clean water
(do not use wax, oil-based, or abrasive
cleaners).
1"x 6"
Inside
Corner
installation tips at www.florimusa.com
Aggregate
V3
V4
UNIFORM APPEARANCE
SLIGHT VARIATION
MODERATE VARIATION
SUBSTANTIAL VARIATION
Differences among pieces from the
same production run are minimal.
Clearly distinguishable differences
in texture and/or pattern with similar
colors.
While the colors present on a single
piece of tile will be indicative of the
colors to be expected on the other
tiles, the amount of colors on each
piece will vary significantly.
Random color differences from tile
to tile, so that one tile may have
totally different colors from that on
other tiles. Thus, the final installation
will be unique.
V2
Colors Shown in this brochure may vary
from actual product.
Final selection should be made from
actual product samples.
✦ Minimum grout size recommended = 5 mm (or approx. 3/16" If staggered tile placement, we recommend
using a 30% offset. If specified brick pattern with 1/2 pattern mandatory, a bigger grout is recommended to hide
imperfections of installation (minimum 1/4").
Sediment
SLIGHT VARIATION
TECHNICAL SPECIFICATIONS
Surface Abrasion
Water Absorption
Chemical Resistance
Coefficient of Friction
e in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian
PEI
IV
≤ 0.5%
CLASS A
(Dry)
(Wet)
0.60 ✦
0.60 ✦
CLASS A
> 400
RESISTANT
≥6
Stain Resistance
Breaking Strength
Resistance to freeze
Scratch Hardness
6"x12"
Cove Base
LAYERS
Aggregate
V2
1"x 6"
Outside
Corner
Find more care, maintenance, and
PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
V1
LAYERS
• Sweep or vacuum regularly.
• Wash with a household cleaner and
Sediment
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2
FLORIM
USA
SLIGHT VARIATION
FLOOR TILE
24”x24”
12”x24”
12”x12”
Mosaics
Cove Base
Trims
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED.
PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
SHADE VARIATION
V2
ASTM C1027
ASTM C373
ASTM 650
ASTM C1028
ASTM C1028
ASTM C1378
ASTM C648
ASTM C1026
MOHS
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
✦ DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY
WITHIN AND BETWEEN PRODUCT RUNS.
Chalk
PROGRESS THAT TOUCHES AND INVESTS IN THE ENTIRE SOCIETY
As a active member of the U.S Green Building Council, Florim spreads awareness to the entire American communities
and encourages towards the use of building solutions inspired by environmentally friendly practices.
Using Florim products for project implementation, will positively contribute in obtaining scores and points required for
earning the LEED certification (Leadership in Energy and Environmental Design).
Culla Set
Set of 4 Boards
(18”x33”)
A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR A CONSCIOUS BUILDING TRADE
Florim offers products containing recycled material. The adoption of eco-compatible production systems is merit of
Italian designs produced in the U.S.
300 International Blvd. Clarksville, TN 37040
free call 877 - Florim1 (356-7461)
tel. 931 645 5100
www.florimusa.com
Sediment
FLORIM
USA
Aggregate
TECHNICAL DEVELOPMENT THAT CONSIDERS THE NATURAL ENVIRONMENT
Florim commits to the eco-compatible project and translates the same into an avant-guard production process,
minimizing the negative impact on the environment.
Sediment
An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An
702704
Back of Tile Label (11 ¾”x11 ¾”) - $1.50 each
701821
An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An italian tile made in USA An italian tile made in USA An italian tile
made in USA An italian tile made in USA An italian tile made in USA An italian tile made in USA
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”X24” - 24”X24” - 12”X12” - MOSAICS
TRIMS: BULLNOSE - COVE BASE - INSIDE/OUTSIDE CORNERS
FLOOR / WALL
SHADE VARIATION : V2
THICKNESS: 10MM - 11MM (12”X24”, 24”X24”)
LAYERS
G LA ZED P ORCELA I N
COLLE CT I ON M AD E WITH HIG H DEF I NI TI ON T EC HNOLO G Y
24”x24” - 12”x24” - 12”x12” - mosaics - cove base - bullnose
Chalk
V2
Aggregate
Sediment
SLIGHT VARIATION
V2
V2
SLIGHT VARIATION
Obsidian
V2
SLIGHT VARIATION
SLIGHT VARIATION
1094421 - 12”x24”
1094423 - 12”x24”
1094420 - 12”x24”
1094422 - 12”x24”
1094426 - 24”x24”
1094425 - 24”x24”
1094427- 24”x24”
1094424 - 24”x24”
1094417 - 12”x12”
1094419 - 12”x12”
1094416 - 12”x12”
1094418 - 12”x12”
1094433 - 2”x2”
Mosaic (12”x12”)
1094435 - 2”x2”
Mosaic (12”x12”)
1094432 - 2”x2”
Mosaic (12”x12”)
1094434 - 2”x2”
Mosaic (12”x12”)
1094429
3”x12” Bullnose
1094431
3”x12” Bullnose
1094428
3”x12” Bullnose
1094430
3”x12” Bullnose
1094437
6”x12”
Cove Base
1094439
6”x12”
Cove Base
1094445
1”x6” Outside
Corner
1094441
1”x6” Inside
Corner
1094436
6”x12”
Cove Base
1094447
1”x6” Outside
Corner
1094444
1”x6” Outside
Corner
1094443
1”x6” Inside
Corner
1094438
6”x12”
Cove Base
1094440
1”x6” Inside
Corner
NOMINAL SIZE
24”x24”
12”x24”
12”x12”
2”x2” Mosaic (12”x12”)
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
V2
1094446
1”x6” Outside
Corner
1094442
1”x6” Inside
Corner
INCHES
METRIC
(CM)
THICKNESS
(CM)
HOW TO MAINTAIN YOUR
PORCELAIN TILE
23 3/4”x 23 3/4”
11 3/4”x 23 3/4”
11 3/4”x 11 3/4”
11 3/4”x 11 3/4”
5 3/4”x 11 3/4”
1”x 5 3/4”
1”x 5 3/4”
3”x 11 3/4”
60x60
30x60
30x30
30x30
15x30
2.5x15
2.5x15
7.5x30
11 mm
11 mm
10 mm
10mm
8 mm
8 mm
8 mm
10 mm
• Sweep or vacuum regularly.
• Wash with a household cleaner and
hot water then rinse with clean water
(do not use wax, oil-based, or abrasive cleaners).
SLIGHT VARIATION
Clearly distinguishable differences in texture and/or pattern with similar colors.
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET.
IF SPECIFIED BRICK PATTERN WITH 1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION
(MINIMUM 1/4”).
Find more care, maintenance, and installation tips at www.florim.com
FLORIM
USA
701821 - March 2010
$200.00
Featuring
Iced Rocks
300 International Blvd.
Clarksville, TN 37040
Toll free:1- 877 - Florim1 (356-7461)
Phone: 931 645 5100
www.florimusa.com
Scan this barcode with your smart phone for
more care, maintenance, and installation tips
at www.florimusa.com