AFRIKA - Florim USA

e made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAmade in USA An italian tile made in USA A
SUBSTANTIAL VARIATION
Random color differences from tile
to tile, so that one tile may have
totally different colors from that on
other tiles. Thus, the final installation
will be unique.
40% RECYCLED
CONTENT
AFRIKA
The Afrika collection is inspired by the warm colors of a faraway land that is home
to diverse ethnicities and languages. The sinuosity of the lines evokes the soft
m o v e m e n t s o f t h e w i n d c r e a t i n g a m a z i n g a n d p e r f e c t s a n d d u n e s . Ti l e f l o o r i n g
with the power to harness the glowing colors of a tropical savanna sunset. An
impressive surface that reproduces the glowing colors only found in the most
heavenly tropical savanna sunsets. The series comes in four colors that embody
the sensations and atmospheres of this ancient continent.
cairo
PRODUCT FEATURES
Afrika is a Glazed Porcelain, High Definition Graphic, stone look
with a 40% recycled content body.
18”x18”
12”x12”
Mosaic 12”x12”
6”x6”
dakar
Listello Mosaic 12”x12”
capetown
3”x12” Bullnose
Outside Corner 1”x6”
Inside Corner 1”x6”
Cove Base 6”x12”
TECHNICAL SPECIFICATIONS - GLAZED PORCELAIN
nairobi
Surface Abrasion
Water Absorption
Chemical Resistance
Dynamic Coefficient of Friction
Stain Resistance
Breaking Strength
Resistance to Freeze
Scratch Hardness
PEI
IV
≤ 0.5%
NOT AFFECTED
≥0.50 F
NOT AFFECTED
≥ 400
RESISTANT
≥8
ASTM C1027
ASTM C373
ASTM 650
ANSI 137.1
ASTM C1378
ASTM C648
ASTM C1026
MOHS
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
F DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE
COEFFICENT OF FRICTION MAY VARY WITHIN AND BETWEEN PRODUCT RUNS.
e made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAmade in USA An italian tile made in USA A
n tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian
SUBSTANTIAL VARIATION
FLORIM
USA
Random color differences from tile
to tile, so that one tile may have
totally different colors from that on
40%
other tiles.
Thus,RECYCLED
the final installation
will be unique.
CONTENT
40% RECYCLED
CONTENT
AFRIKA
Sample Boards (25”x25”) - $11.00 each
Capetown - 701817
Nairobi - 701819
Dakar - 701818
Cairo- 701816
Contractor Board
(9”x11”) - $5.00 each
Cairo
Nairobi
An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA
An italian
An Italian
tile made
tile made
in USA
in the
AnUSAin
italian tile
USA
made
An italian
in thetile
USA
made
An in
Italian
USA
tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA
An italian
An Italian
tile made
tile made
in USA
in the
AnUSAin
italian tile
USA
made
An italian
in thetile
USA
made
An in
Italian
USA
tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAin USA An italian tile made in USA
FLORIM
USA
PROGRESS THAT TOUCHES PEOPLE AND INVESTS IN THE ENTIRE SOCIETY
As an active member of the U.S. Green Building Council, Florim promotes awareness in the American community of a greener
tomorrow by encouraging the use of building solutions inspired by environmentally friendly practices. Using Florim products in
building projects will contribute to the attainment of scores and points required for LEED certification (Leadership in Energy and
Environmental Design).
SUGGESTED INSTALLATIONS
AFRIKA
PEI Class
IV
Moderate to heavy foot traffic
FLORIM
USA
A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR RESPONSIBLE AND SUSTAINABLE BUILDING
Florim offers products containing recycled material. The adoption of ecologically compatible production systems emerges from
Italian designs produced in the U.S.A.
Recommended for all residential applications as well as medium commercial and light institutional
applications.
TECHNICAL DEVELOPMENT THAT RESPECTS THE NATURAL ENVIRONMENT
Florim is committed to eco-sustainable projects, as reflected in avant-garde production processes that minimize the impact on the
environment.
COLOR CODY PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”X24” - 18”X18” - 12”X12” - 6”X6”-MOSAICS
TRIMS: BULLNOSE - COVE BASE - INSIDE/OUTSIDE CORNERS
FLOOR / WALL
SHADE VARIATION : V4
THICKNESS: 10MM - 11MM (12”X24”)
AFRIKA
FLORIM
USA
40% RECYCLED CONTENT
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
18”x18” - 12”x24” - 12”x12” - 6”x6”- mosaics - cove base - bullnose
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”X24” - 18”X18” - 12”X12” - 6”X6”-MOSAICS
TRIMS: BULLNOSE - COVE BASE - INSIDE/OUTSIDE CORNERS
FLOOR / WALL
SHADE VARIATION : V4
THICKNESS: 10MM - 11MM (12”X24”)
AFRIKA
701792
40% RECYCLED CONTENT
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
18”x18” - 12”x24” - 12”x12” - 6”x6”- mosaics - trims
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile
18”x18” - 12”x24” - 12”x12” - 6”x6”- mosaics - trims
FLORIM
USA
An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian
italian tile made in USA
the USAin
An italian
USA
tileAn
made
italianintile
the
made
USAin
AnUSA
Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAin USA An italian tile made in USA
FLORIM
USA
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”X24” - 18”X18” - 12”X12” - 6”X6”- MOSAICS
TRIMS: BULLNOSE - COVE BASE - INSIDE/OUTSIDE CORNERS
FLOOR / WALL
SHADE VARIATION : V4
THICKNESS: 10MM - 11MM (12”X24”)
AFRIKA
FLORIM
USA
40% RECYCLED CONTENT
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”X24” - 18”X18” - 12”X12” - 6”X6”-MOSAICS
TRIMS: BULLNOSE - COVE BASE - INSIDE/OUTSIDE CORNERS
FLOOR / WALL
SHADE VARIATION : V4
THICKNESS: 10MM - 11MM (12”X24”)
AFRIKA
AFRIKA
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
FLORIM
USA
18”x18” - 12”x24” - 12”x12” - 6”x6”- mosaics - trims
18”x18” - 12”x24” - 12”x12” - 6”x6”- mosaics - trims
V4
SUBSTANCIAL VARIATION
V4
SUBSTANCIAL VARIATION
Nominal Size
1094389 - 12”x24”
18”x18”
12”x24”
12”x12”
6”x6”
2”x2” Mosaic (12”x12”)
6”x12” Cove Base
1”x6” Inside Corner
1”x6” Outside Corner
3”x12” Bullnose
1094391 - 12”x24”
1094385 - 18”x18”
1094387- 18”x18”
1094393 - 6”x6”
1094401
6”x12”
Cove Base
1094413
1”x6” Outside
Corner
1094409
1”x6” Inside
Corner
1094397
3”x12” Bullnose
1094383 - 12”x12”
1094395 - 6”x6”
1094407 - 2”x2”
Mosaic (12”x12”)
1094403
6”x12”
Cove Base
18”x18”
12”x24”
12”x12”
6”x6”
2”x2” Mosaic (12”x12”)
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
1094415
1”x6” Outside
Corner
1094411
1”x6” Inside
Corner
CAPETOWN
NAIROBI
DAKAR
CAIRO
1094385
1094389
1094381
1094393
1094405
1094401
1094409
1094413
1094397
1094387
1094391
1094383
1094395
1094407
1094403
1094411
1094415
1094399
1094386
1094390
1094382
1094394
1094406
1094402
1094410
1094414
1094398
1094384
1094388
1094380
1094392
1094404
1094400
1094408
1094412
1094396
METRIC
(CM)
THICKNESS
(CM)
45x45
30x60
30x30
15x15
30x30
10 mm
11 mm
10 mm
10 mm
10mm
15x30
2.5x15
2.5x15
8 mm
8 mm
8 mm
7.5x30
10 mm
PIECES PER BOX
SQ. FT PER BOX
6
6
13
30
10
13.5
12
13
7.5
10
10
4
4
5
.16
.16
12
3
WEIGHT PER BOX
57.4
52.8
55.3
72
41
UM PER
PALLET
WEIGHT PER PALLET
432
576
624
540
450
17.5
1
1
-
168
2016
1892
2589
2709
1890
1900
-
SUBSTANCIAL VARIATION
Cairo
V4
1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
Surface Abrasion
Water Absorption
Chemical Resistance
Coefficient of Friction
PEI
IV
< 0.5%
CLASS A
(Dry)
(Wet)
≥0.60 ✦
≥0.60 ✦
CLASS A
> 400
RESISTANT
≥6
Stain Resistance
Breaking Strength
Resistance to freeze
Scratch Hardness
1094407 - 2”x2”
Mosaic (12”x12”)
Nominal Size
HOW TO MAINTAIN
YOUR PORCELAIN TILE
• Sweep or vacuum regularly.
• Wash with a household
cleaner and hot water then
rinse with clean water (do
not use wax, oil-based,
or abrasive cleaners).
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” I F STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH
SUBSTANCIAL VARIATION
ASTM C1027
ASTM C373
ASTM 650
ASTM C1028
ASTM C1028
ASTM C1378
ASTM C648
ASTM C1026
MOHS
18”x18”
12”x24”
12”x12”
6”x6”
2”x2” Mosaic (12”x12”)
Listello Mosaic (14.75”x12”)
6”x12” Cove Base
1”x6” Inside Corner
1”x6” Outside Corner
3”x12” Bullnose
Find more care, maintenance, and installation tips at
www.florim.com
Colors Shown in this brochure may vary from actual product.
Final selection should be made from actual product samples.
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
1094388 - 12”x24”
NOMINAL SIZE
SHADE VARIATION
1094386 - 18”x18”
1094406 - 2”x2”
Mosaic (12”x12”)
1094402
6”x12”
Cove Base
1094410
1”x6” Inside
Corner
1094398
3”x12” Bullnose
1094404 - 2”x2”
Mosaic (12”x12”)
V1
1094392 - 6”x6”
1094400
6”x12”
Cove Base
1094412
1”x6” Outside
Corner
1094408
1”x6” Inside
Corner
1094396
3”x12” Bullnose
*
*
V3
UNIFORM APPEARANCE
V2
Differences among pieces from the same
production run are minimal.
SLIGHT VARIATION
Clearly distinguishable differences in texture
and/or pattern with similar colors.
MODERATE VARIATION
SUBSTANTIAL VARIATION
While the colors present on a single piece
of tile will be indicative of the colors to be
expected on the other tiles, the amount of
colors on each piece will vary significantly.
Random color differences from tile to tile,
so that one tile may have totally different
colors from that on other tiles. Thus, the
final installation will be unique.
*
V4
NAIROBI
300 International Blvd.
Clarksville, TN 37040
Toll free: 877 - Florim1 (356-7461)
tel. 931 645 5100
FLOOR AND WALL
Tiles with styling and sizes suitable
for both floors and walls.
www.florimusa.com
FLOOR
AND WALL
CONSUMERS SHOULD LOOK AT MULTIPLE PIECES OF TILE TO REALIZE THE FULL COLOR SPECTRUM OF THIS PRODUCT
V4
V2
SUBSTANTIAL VARIATION
Random color differences from tile to tile, so that one tile may
have totally different colors from that on other tiles. Thus, the
final installation will be unique.
CAIRO
AVAILABLE IN
ALL COLORS
FLOOR AND WALL
Tiles with styling and sizes suitable
for both floors and walls.
3”x12”
Bullnose
6”x12”
Cove Base
1”x6”
1”x6”
Inside Corner Outside Corner
701817 - May 2010
1094380 - 12”x12”
1094414
1”x6” Outside
Corner
18”x18”
12”x24”
12”x12”
6”x6”
2”x2” Mosaic (12”x12”)
Listello Mosaic (14.75”x12”)
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
1094384 - 18”x18”
1094394 - 6”x6”
701817 - May 2010
1094382 - 12”x12”
1094401
6”x12”
Cove Base
1094488
Listello Mosaic
(14.75”x12”)
1094413
1”x6” Outside
Corner
SUBSTANCIAL VARIATION
1094409
1”x6” Inside
Corner
V4
1094403
6”x12”
Cove Base
1094415
1”x6” Outside
Corner
1094397
3”x12” Bullnose
SUBSTANCIAL VARIATION
CAPETOWN
NAIROBI
DAKAR
CAIRO
1094385
1094389
1094381
1094393
1094405
1094486
1094401
1094409
1094413
1094397
1094387
1094391
1094383
1094395
1094407
1094488
1094403
1094411
1094415
1094399
1094386
1094390
1094382
1094394
1094406
1094487
1094402
1094410
1094414
1094398
1094384
1094388
1094380
1094392
1094404
1094485
1094400
1094408
1094412
1094396
Dakar
1094411
1”x6” Inside
Corner
1094406 - 2”x2”
Mosaic (12”x12”)
V4
1094399
3”x12” Bullnose
1094487
Listello Mosaic
(14.75”x12”)
1094402
6”x12”
Cove Base
1094414
1”x6” Outside
Corner
SUBSTANCIAL VARIATION
1094410
1”x6” Inside
Corner
1094398
3”x12” Bullnose
PACKAGING
✦ DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY
WITHIN AND BETWEEN PRODUCT RUNS.
1094390 - 12”x24”
1094486
Listello Mosaic
(14.75”x12”)
COLOR SPECIFICATIONS AND SIZES AVAILABLE
2189
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED.
PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
1094399
3”x12” Bullnose
TECHNICAL SPECIFICATIONS
V4
1094405 - 2”x2”
Mosaic (12”x12”)
Nairobi
Benefits of Porcelain Tile
• Impervious to water
• Easy to maintain
• Variety of design options
• Environmentally friendly
• Resistant to germs and bacteria
• Fade resistant
• Fire resistant
• Durable - best long-term
value vs. other floor coveings
PACKAGING
NOMINAL SIZE
1094381 - 12”x12”
1094405 - 2”x2”
Mosaic (12”x12”)
Dakar
18”x18” - 12”x24” - 12”x12” - 6”x6” - mosaics - trims
NAIROBI
WHY PORCELAIN?
There are many reasons to
choose impervious porcelain
tile over other floor coverings. It
offers the largest array of design
options and holds its value the
longest.
In a comparison between the
many different flooring options,
porcelain tile offers one of the
most durable and least expensive options over the lifespan of the
building.
COLOR SPECIFICATIONS AND SIZES AVAILABLE
V4
GLAZ E D PORC EL AIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
CAPETOWN
Nairobi
GLAZED PORCELAIN
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”x24” - 18”x18” - 12”x12” - 6”x6”- mosaics
TRIMS: bullnose - cove base - inside/outside corners
FLOOR / WALL
Capetown
40% RECYCLED
CONTENT
AFRIKA
Capetown
40% RECYCLED
CONTENT
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile
40% RECYCLED CONTENT
FLOOR
AND WALL
877-Florim1 (356-7461) - www.florimusa.com
V4
SUBSTANTIAL VARIATION
Random color differences from tile to tile, so that one tile may
have totally different colors from that on other tiles. Thus, the
final installation will be unique.
CAIRO
DAKAR
AVAILABLE IN
ALL COLORS
METRIC
(CM)
THICKNESS
(MM)
PIECES PER BOX
SQ. FT PER BOX
WEIGHT PER BOX
UM PER
PALLET
WEIGHT PER PALLET
45x45
30x60
30x30
15x15
30x30
36.8x30
15x30
2.5x15
2.5x15
7.5x30
10 mm
11 mm
10 mm
10 mm
10mm
10mm
8 mm
8 mm
8 mm
10 mm
6
6
13
30
10
10
10
4
4
12
13.5
12
13
7.5
10
12.5
.16
.16
3
57.4
52.8
55.3
72
41
51.25
17.5
1
1
168
432
576
624
540
450
562.5
2016
1892
2589
2709
2294
1900
2306.25
2189
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED.
PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
3”x12”
Bullnose
6”x12”
Cove Base
1094404 - 2”x2”
Mosaic (12”x12”)
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2
1”x6”
1”x6”
Inside Corner Outside Corner
Cairo
V4
1094485
Listello Mosaic
(14.75”x12”)
1094400
6”x12”
Cove Base
1094412
1”x6” Outside
Corner
SUBSTANCIAL VARIATION
1094408
1”x6” Inside
Corner
1094396
3”x12” Bullnose
PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
877-Florim1 (356-7461) - www.florimusa.com
PEI
(Dry)
(Wet)
Coefficient of Friction
Stain Resistance
Breaking Strength
Resistance to freeze
Scratch Hardness
IV
≤ 0.5%
CLASS A
≥0.60 ✦
≥0.60 ✦
CLASS A
≥ 400
RESISTANT
≥6
ASTM C1027
ASTM C373
ASTM 650
ASTM C1028
ASTM C1028
ASTM C1378
ASTM C648
ASTM C1026
MOHS
✦ DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY
CAPETOWN
FLOOR AND WALL
Tiles with styling and sizes suitable
for both floors and walls.
FLOOR
AND WALL
V2
V4
SUBSTANTIAL VARIATION
Random color differences from tile to tile, so that one tile may
have totally different colors from that on other tiles. Thus, the
final installation will be unique.
DAKAR
AVAILABLE IN
ALL COLORS
FLOOR AND WALL
Tiles with styling and sizes suitable
for both floors and walls.
3”x12”
Bullnose
6”x12”
Cove Base
1”x6”
1”x6”
Inside Corner Outside Corner
Capetown
877-Florim1 (356-7461) - www.florimusa.com
701817 - May 2010
701817 - May 2010
WITHIN AND BETWEEN PRODUCT RUNS.
FLOOR
AND WALL
V4
SUBSTANTIAL VARIATION
Random color differences from tile to tile, so that one tile may
have totally different colors from that on other tiles. Thus, the
final installation will be unique.
Find more care, maintenance, and installation tips at
www.florimusa.com.
701792 - May 2010
TECHNICAL SPECIFICATIONS
Surface Abrasion
Water Absorption
Chemical Resistance
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
AVAILABLE IN
ALL COLORS
3”x12”
Bullnose
6”x12”
Cove Base
1”x6”
1”x6”
Inside Corner Outside Corner
877-Florim1 (356-7461) - www.florimusa.com
Dakar
Brochure (8 ½”x11”) - $2.80 each
701790
Architect Binder (8 ¾”x11”) - $15.00 each
9
GLAZED
PORCELAIN
FLOOR TILE
18”x18”
12”x24”
12”x12”
6”x6”
Mosaics
Trims
V4
WHY PORCELAIN?
COLOR SPECIFICATIONS AND SIZES AVAILABLE
Nominal Size
18”x18”
12”x24”
12”x12”
6”x6”
2”x2” Mosaic (12”x12”)
Listello Mosaic (14.75”x12”)
6”x12” Cove Base
1”x6” Inside Corner
1”x6” Outside Corner
3”x12” Bullnose
ian tile made in USA
CAPETOWN
NAIROBI
DAKAR
CAIRO
1094385
1094389
1094381
1094393
1094405
1094486
1094401
1094409
1094413
1094397
1094387
1094391
1094383
1094395
1094407
1094488
1094403
1094411
1094415
1094399
1094386
1094390
1094382
1094394
1094406
1094487
1094402
1094410
1094414
1094398
1094384
1094388
1094380
1094392
1094404
1094485
1094400
1094408
1094412
1094396
There are many reasons to choose
impervious porcelain tile over other floor
coverings. It offers the largest array of
design options and holds its value the
longest. In a comparison between the
many different flooring options, porcelain
tile offers one of the most durable and
least expensive options over the lifespan
of the building.
SUBSTANCIAL VARIATION
NOMINAL SIZE
18”x18”
12”x24”
12”x12”
6”x6”
2”x2” Mosaic (12”x12”)
Listello Mosaic (14.75”x12”)
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
METRIC
(CM)
THICKNESS
(MM)
PIECES PER BOX
SQ. FT PER BOX
WEIGHT PER BOX
UM PER
PALLET
WEIGHT PER PALLET
45x45
30x60
30x30
15x15
30x30
36.8x30
15x30
2.5x15
2.5x15
7.5x30
10 mm
11 mm
10 mm
10 mm
10mm
10mm
8 mm
8 mm
8 mm
10 mm
6
6
13
30
10
10
10
4
4
12
13.5
12
13
7.5
10
12.5
.16
.16
3
57.4
52.8
55.3
72
41
51.25
17.5
1
1
168
432
576
624
540
450
562.5
2016
1892
2589
2709
2294
1900
2306.25
2189
V2
V3
• Wash with a household cleaner and
hot water then rinse with clean water
(do not use wax, oil-based, or abrasive
cleaners).
SLIGHT VARIATION
MODERATE VARIATION
SUBSTANTIAL VARIATION
Differences among pieces from the
same production run are minimal.
Clearly distinguishable differences
in texture and/or pattern with similar
colors.
While the colors present on a single
piece of tile will be indicative of the
colors to be expected on the other
tiles, the amount of colors on each
piece will vary significantly.
Random color differences from tile
to tile, so that one tile may have
totally different colors from that on
other tiles. Thus, the final installation
will be unique.
Dakar
V4
PEI
IV
≤ 0.5%
CLASS A
(Dry)
(Wet)
≥0.60 ✦
≥0.60 ✦
CLASS A
≥ 400
RESISTANT
≥6
Surface Abrasion
Water Absorption
Chemical Resistance
SUBSTANCIAL VARIATION
Coefficient of Friction
Stain Resistance
Breaking Strength
Resistance to freeze
Scratch Hardness
ASTM C1027
ASTM C373
ASTM 650
ASTM C1028
ASTM C1028
ASTM C1378
ASTM C648
ASTM C1026
MOHS
AFRIKA
40% RECYCLED
CONTENT
6” x6”
Colors Shown in this brochure may vary
from actual product.
Final selection should be made from
actual product samples.
14 3/4"x 12"
Listello Mosaic
TECHNICAL SPECIFICATIONS
Dakar
1"x 6"
Outside
Corner
6"x12"
Cove Base
more care, maintenance, and
Nairobi Find
installation tips at www.florimusa.com
V4
UNIFORM APPEARANCE
1"x 6"
Inside
Corner
HOW TO MAINTAIN YOUR
PORCELAIN TILE
Capetown
• Sweep or vacuum regularly.
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED.
PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
V1
9
GLAZED
PORCELAIN
• Impervious to water
• Easy to maintain
• Variety of design options
• Environmentally friendly
18” x18”
• Resistant to germs and bacteria
• Fade resistant
• Fire resistant
• Durable - best long-term value vs.
other floor coverings
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2
PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
SHADE VARIATION
SUBSTANCIAL VARIATION
AFRIKA
V4
V4
FLOOR TILE
18”x18”
12”x24”
12”x12”
6”x6”
Mosaics
Trims
Benefits of Porcelain Tile
PACKAGING
Nairobi
Cairo
40% RECYCLED
CONTENT
SUBSTANCIAL VARIATION
701793 - May 2010
Capetown
AFRIKA
AFRIK A
701793
✦ Minimum grout size recommended = 5 mm (or approx. 3/16" If staggered tile placement, we recommend
using a 30% offset. If specified brick pattern with 1/2 pattern mandatory, a bigger grout is recommended to hide
imperfections of installation (minimum 1/4").
Cairo
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
An Italian tile made in the USA
✦ DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY
WITHIN AND BETWEEN PRODUCT RUNS.
Capetown
PROGRESS THAT TOUCHES AND INVESTS IN THE ENTIRE SOCIETY
As a active member of the U.S Green Building Council, Florim spreads awareness to the entire American communities
and encourages towards the use of building solutions inspired by environmentally friendly practices.
Using Florim products for project implementation, will positively contribute in obtaining scores and points required for
earning the LEED certification (Leadership in Energy and Environmental Design).
Culla Set
Set of 4
(18”x33”)
702702
$200.00
300 International Blvd. Clarksville, TN 37040
free call 877 - Florim1 (356-7461)
tel. 931 645 5100
www.florimusa.com
Nairobi
A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR A CONSCIOUS BUILDING TRADE
Florim offers products containing recycled material. The adoption of eco-compatible production systems is merit of
Italian designs produced in the U.S.
FLORIM
USA
Dakar
TECHNICAL DEVELOPMENT THAT CONSIDERS THE NATURAL ENVIRONMENT
Florim commits to the eco-compatible project and translates the same into an avant-guard production process,
minimizing the negative impact on the environment.
Cairo
An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An
An italian tile
made in USA
Back of Tile Label (11 ¾”x11 ¾”) - $1.50 each
701791
made in USA An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An italian tile made in USA An italian tile made in USA An italian tile
An italian tile made in USA An italian tile made in USA An italian tile made in USA
GLAZED PORCELAIN
AFRIKA
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
SIZES AVAILABLE:
12”X24” - 18”X18” - 12”X12” - 6”X6”- MOSAICS
TRIMS: BULLNOSE - COVE BASE - INSIDE/OUTSIDE CORNERS
FLOOR / WALL
40% RECYCLED
CONTENT
G L A ZE D P O RC E LA I N
COLLECTION MADE WITH HIGH DEFINITION TECHNOLOGY
18”x18” - 12”x24” - 12”x12” - 6”x6”- mosaics - trims
Capetown
V4
Nairobi
SUBSTANCIAL VARIATION
V4
1094387- 18”x18”
1094385 - 18”x18”
1094381 - 12”x12”
1094393 - 6”x6”
1094405 - 2”x2”
Mosaic (12”x12”)
1094486
Listello Mosaic
(14.75”x12”)
1094383 - 12”x12”
1094401
6”x12”
Cove Base
1094413
1”x6” Outside
Corner
V4
1094395 - 6”x6”
1094403
6”x12”
Cove Base
1094409
1”x6” Inside
Corner
1094407 - 2”x2”
Mosaic (12”x12”)
1094397
3”x12” Bullnose
Dakar
1094415
1”x6” Outside
Corner
1094411
1”x6” Inside
Corner
1094399
3”x12” Bullnose
1094488
Listello Mosaic
(14.75”x12”)
Cairo
SUBSTANCIAL VARIATION
V4
SUBSTANCIAL VARIATION
1094388 - 12”x24”
1094390 - 12”x24”
1094384 - 18”x18”
1094386 - 18”x18”
1094487
Listello Mosaic
(14.75”x12”)
1094414
1”x6” Outside
Corner
1094398
3”x12” Bullnose
1094400
6”x12”
Cove Base
1094404 - 2”x2”
Mosaic (12”x12”)
NOMINAL SIZE
40% RECYCLED
CONTENT
V4
1094392 - 6”x6”
1094410
1”x6” Inside
Corner
18”x18”
12”x24”
12”x12”
6”x6”
2”x2” Mosaic (12”x12”)
Listello Mosaic (14 3/4”x12”)
6”x12” Cove Base .
1”x6” Inside Corner .
1”x6” Outside Corner .
3”x12” Bullnose
1094485
Listello Mosaic
(14.75”x12”)
1094412
1”x6” Outside
Corner
1094408
1”x6” Inside
Corner
1094396
3”x12” Bullnose
INCHES
METRIC
(CM)
THICKNESS
(MM)
17 3/4”x 17 3/4”
11 3/4”x 23 3/4”
11 3/4”x 11 3/4”
5 3/4”x 5 3/4”
11 3/4”x 11 3/4”
14 3/4”x 12”
6”x 11 3/4”
1”x 5 3/4”
1”x 5 3/4”
3”x 11 3/4”
45x45
30x60
30x30
15x15
30x30
36.8x30
15x30
2.5x15
2.5x15
7.5x30
10 mm
11 mm
10 mm
10 mm
10mm
10mm
8 mm
8 mm
8 mm
10 mm
SUBSTANTIAL VARIATION
Random color differences from tile to tile, so that one tile may
have totally different colors from that on other tiles. Thus, the
final installation will be unique.
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET.
IF SPECIFIED BRICK PATTERN WITH 1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION
(MINIMUM 1/4”).
HOW TO MAINTAIN YOUR
PORCELAIN TILE
• Sweep or vacuum regularly.
• Wash with a household cleaner and
hot water then rinse with clean water
(do not use wax, oil-based, or abrasive cleaners).
Find more care, maintenance, and installation tips at www.florim.com
FLORIM
USA
701791 - May 2010
1094380 - 12”x12”
1094394 - 6”x6”
1094402
6”x12”
Cove Base
1094406 - 2”x2”
Mosaic (12”x12”)
SUBSTANCIAL VARIATION
1094391 - 12”x24”
1094389 - 12”x24”
1094382 - 12”x12”
SHADE VARIATION : V4
THICKNESS: 10MM - 11MM (12”X24”)
300 International Blvd.
Clarksville, TN 37040
Toll free:1- 877 - Florim1 (356-7461)
Phone: 931 645 5100
www.florimusa.com
Find more care, maintenance, and installation tips at
www.florimusa.com