doctools - DOCAP
download 
Report Transcription
tools - DOCAP
TOOLS A trusted name, serving Canadian industries since 1939 www.docap.com tools CA-DO_T-1213-17 “C” Clamps 3 Heavy Duty Wire Stripper 6 4 Pc Sand Blasting Kit 22 Hole Saw – High Speed Steel 11 48” Lift – All Jack 4 Knife Sharpener 13 204 Pc Drill Set 9 Magnetic Tools 23 285 Automotive Electrical Repair Kit 24 Mallet 2 Auto & Marine Electrical Tool Kit 24 Mechanic’s Seat 22 Axes 2 Micrometer with Counter 17 Ball Pen Machinist’s Hammers 3 One Touch Snow Brush 1 Battery Brush 23 Pliers 7 Battery Filler 22 Post and Terminal Cleaner 23 Battery Terminal Lifter 22 Power Pullers 4 Bench Grinder 3 Retractable Knives 13 Brass Jiggle Siphon 19 Rivets 11 Brushes 17 Rivets Nuts 11 Burrs 9 Saw 12 Cable and Spring Wire Cutter 6 Shears 15 Chalk Line Reel 19 Shovels 1 Chisel Set 8 Side Terminal Battery Wrench 23 Circuit Testers 24 Sledge Hammer with Fibreglass Handle 2 Sledge/Club Hammers 2 Cobalt Bi-Metal Blade 12 Slide Hammer 5 Creeper 22 Speed Angle Driver 10 Crimping Tool 5 Spray Gun 21 Cutters 6 Tape Measures 16 Digital Battery Load Tester 25 Testers 23 Digital Caliper 17 T-Handle Key Sets 8 Digital Multi-Meter 25 Tie Wire 18 Drill Bits 8 Ties 18 Drill Chucks 10 Transfer Pumps 20 Engraver 5 Trigger Sprayer 19 Flashlights 24 Vacuum Cup 19 Funnel Heavy Duty 19 Vises 3 Grease Gun & Accessories 21 Wrenches 7 Hand Pump 20 TOOLS ONE TOUCH SNOW BRUSH • • • • DRAIN SPADE TURN STEP SHOVEL (TRACK SHOVEL) Adjustable Telescopic handle 11” width Length 28” extends to 46” Product Code Description Pkg Qty 645-250 Snow brush 1 Product Code Description Pkg Qty 645-272 645-272H Drain Spade Turn Step Shovel Replacement Handle 1 1 GRAIN SCOOP SHOVEL SHOVELS SIDEWALK SCRAPER Product Code Description Pkg Qty 645-265 Sidewalk scraper 1 Product Code Description Pkg Qty 645-273 645-273H Grain Scoop Shovel Replacement Handle 1 1 ROUND POINT SHOVEL WITH Y HANDLE SQUARE POINT SHOVEL Product Code Description Pkg Qty 645-270 Square Point Shovel 1 ROUND POINT SHOVEL Product Code Description Pkg Qty 645-275 Round Point Shovel with Y handle 1 SQUARE POINT SHOVEL WITH Y HANDLE Product Code Description Pkg Qty 645-271 645-271H Round Point Shovel Replacement Handle 1 1 Product Code Description Pkg Qty 645-276 Square Point Shovel with Y handle 1 www.docap.com 1 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS SLEDGE HAMMER WITH FIBERGLASS HANDLE MALLET MALLET WITH FIBERGLASS HANDLE • Great for auto body work • 16 oz. rubber mallet • Rubber head for a cushioned strike Product Code Description Pkg Qty 648-362 Mallet with fiberglass handle 1 30MM DOUBLE FACE SOFT MALLET • • • • High impact plastic head for a positive strike Chrome plated, tubular steel handle for added strength Complete with two removable, replaceable heads Black rubber head for a cushioned strike Product Code Product Code Description Pkg Qty 648-368 30mm double face soft mallet 1 SLEDGE/CLUB HAMMERS Description Pkg Qty 648-424 4 lb Sledge Hammer with Fiberglass Handle 648-426 6 lb Sledge Hammer with Fiberglass Handle 648-428 8 lb Sledge Hammer with Fiberglass Handle 648-430 10 lb Sledge Hammer with Fiberglass Handle 648-431 12 lb Sledge Hammer with Fiberglass Handle 648-433 16 lb Sledge Hammer with Fiberglass Handle 648-435 20 lb Sledge Hammer with Fiberglass Handle REPLACEMENT HANDLES 648-424H 4 lb Replacement Fiberglass Handle 648-426H 6 lb Replacement Fiberglass Handle 648-430H 10-12 lb Replacement Fiberglass Handle 648-433H 16-20 lb Replacement Fiberglass Handle 1 1 1 1 1 1 1 1 1 1 1 AXES Product Code Description 648-370 4 lb Club Hammer 648-371 4 lb Sledge Hammer Hickory Handle 648-372 6 lb Sledge Hammer Hickory Handle 648-373 8 lb Sledge Hammer Hickory Handle 648-375 10 lb Sledge Hammer Hickory Handle 648-374 12 lb Sledge Hammer Hickory Handle 648-376 16 lb Sledge Hammer Hickory Handle 648-369 20 lb Sledge Hammer REPLACEMENT HANDLES 648-371H 4 lb Replacement Hickory Handle 648-372H 6 lb Replacement Hickory Handle 648-373H 8 - 12 lb Replacement Hickory Handle 648-376H 16 lb Replacement Hickory Handle 648-369H 20 lb Replacement Handle Pkg Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 Product Code Description Pkg Qty 648-377 648-378 648-379 648-380 1.1/2 lb Axe with Fiberglass Handle 2.1/2 Axe with Fiberglass Handle 4 lb Axe with Fiberglass Handle 4 lb Axe 1 1 1 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 2 TOOLS BALL PEIN MACHINIST’S HAMMERS BENCH GRINDER AMERICAN HICKORY HANDLES 6” BENCH GRINDER 1/2 HP • Complete with hickory handles • Polished sides Product Code 648-450 648-451 648-452 648-453 648-454 648-455 648-456 Head Weight 1/2 lb. 3/4 lb. 1 lb. 1 ½ lbs. 2 lbs. 2 ½ lbs. 3 lbs. (8 oz) (12 oz) (16 oz) (24 oz) (32 oz) (40 oz) (48 oz) • 1/2 HP motor • 1/2” arbor to accept standard 6” wheel • 115 volts, 60Hz • 3550 RPM (no load) • Eye shields • Ball bearing construction for long life and smooth operation Handle Length Pkg Qty 12” 12” 14” 16” 16” 18” 18” 1 1 1 1 1 1 1 Product Code Description Pkg Qty 647-460 6” Bench Grinder 1/2 HP 1 “C” CLAMPS • Made from forgeable cast malleable iron • Tensile strength FIBERGLASS HANDLES • Polished surfaces • Rubber grip Product Code Description Tensile Strength Pkg Qty 647-791 647-792 647-793 647-794 647-795 647-796 647-797 647-798 “C” Clamp - 2” “C” Clamp - 3” “C” Clamp - 4” “C” Clamp - 5” “C” Clamp - 6” “C” Clamp - 8” “C” Clamp - 10” “C” Clamp - 12” 800 kgs 1000 kgs 1300 kgs 1500 kgs 1800 kgs 2000 kgs 2500 kgs 2800 kgs 1 1 1 1 1 1 1 1 VISES Product Code Head Weight Handle Length Pkg Qty 648-460 648-462 648-463 648-464 648-465 648-466 1/2 lb. (8 oz) 1 lb. (16 oz) 1 ½ lbs. (24 oz) 2 lbs. (32 oz) 2 ½ lbs. (40 oz) 3 lbs. (48 oz) 11 ½” 13” 14” 15 ½” 16 ½” 17 ¾” 1 1 1 1 1 1 4” BENCH VISE • 100mm /4” bench vise • Teeth holds & grips • Swivel handle crank for easy jaw adjustment • Jaw opens to 4” Product Code Description Pkg Qty 647-706 4” 1 www.docap.com 3 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS FIXED BASE VISES WITH ANVIL • • • • • • • Heavy duty construction Vise head and body made from grey cast iron Handle and terminal fittings made of reinforced carbon steel Replaceable reinforced carbon steel jaws Spindle made from reinforced carbon steel Extra deep throat to handle large materials Swivel bases available in grey cast iron Product Code Description Pkg Qty 647-710 647-711 647-712 647-713 647-714 3” 4” 5” 6” 8” 1 1 1 1 1 48” LIFT - ALL JACK • • • • 7000lb lifting capacity Can be used as a jack, hoist, crane and a clamp It can be used for such functions as lifting, pushing and pulling Known as a Farmer’s Jack SWIVEL BASE ONLY Product Code Description Pkg Qty 647-740 Farmer’s Jack 1 POWER PULLER 1 TON HAND POWER PULLER Product Code Description Pkg Qty 647-720 647-721 647-722 647-723 647-724 3” 4” 5” 6” 8” 1 1 1 1 1 Product Code Description Pkg Qty 647-730 647-731 647-732 647-733 647-734 3” 4” 5” 6” 8” 2 2 2 2 2 • • • • • • • Horizontal pulling capacity: 2000 lbs (1000 kgs) Vertical lifting capacity: 1000 lbs (500 kgs) Single line cable: 3/16” x 5mm x 12ft Double line cable: 3/16” x 5mm x 6ft 2 hooks Single gear and pawl Stores conveniently in plastic blowcase REPLACEMENT JAWS Product Code Description Pkg Qty 647-901 1 ton hand power puller 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 4 TOOLS 2 TON HAND POWER PULLER • • • • • • • • SLIDE HAMMER Heavy duty stamped aluminum Patent drive pawl and stop pawl 2 drop forged steel hooks with spring safety catches Double safety switches 3m (10 ft) cable Lifting capacity: 1000kgs/2000lbs Maximum lift: 4.5 ft Pulling capacity: 2000kgs/4000lbs • 22” slide handle with a 4.3/4lb sliding hammer • Comes with the following attachments: External 3 Jaw puller - allows you to remove gears and bearings Internal 3 Jaw puller - provides gripping for a variety of internal pulling jobs External 2 Jaw puller - ideal for close quarter pulling jobs Internal 2 Jaw puller - facilitates easy removal of bearing cups and outer races Grip Wrench Adaptor - allows you to attach grip type wrench to slide hammer Puller Hook - use to remove oil seals and bearings situated where conventional methods don’t work Rear Axle Puller - removes flange type axles from most passenger cars and light trucks Dent Puller - pulls out of hard to get at dents and creases in auto bodies Product Code Description Pkg Qty 647-902 2 ton hand power puller 1 4 TON HAND POWER PULLER • • • • • • • • Heavy duty stamped steel Twin drive pawl and twin stop pawl 3 drop forged steel hooks with spring safety catches Double safety switches 10 ft cable Lifting capacity: 2000kgs/4000lbs Maximum lift: 4.5 ft Pulling capacity: 4000kgs/8000lbs Product Code Description Pkg Qty 647-770 Slide Hammer 1 ENGRAVER • Diamond tipped • Engraves any surface • Includes extra diamond tip • Diamond tip diameter: 2.34 - 0.01mm • Diamond tip length: 45mm Product Code Description Pkg Qty 647-904 4 ton hand power puller 1 Product Code Description Pkg Qty 563-080 Engraver 1 www.docap.com 5 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS CUTTERS CRIMPING TOOL • • • • CABLE CUTTERS Heat treated hardened steel Cuts bolts and steel wire Crimps insulated and ignition terminals Can also be used as a wire stripper • Stainless steel blades, precision ground and hardened for long lasting sharp edges • Cuts up to 10mm soft cable • Handles designed for either left or right handed users • Easy to use safety lock • Spring action • Light weight Product Code Description Pkg Qty 571-505 Crimping Tool 1 Product Code Description Pkg Qty HEAVY DUTY WIRE STRIPPER 690-320 Cable Cutters 1 • Self-adjustable strippers with adjustable stopper for wire stripping length • Adjustable stopper swivels if this function is not require • Micro adjusting swivel knob is available when stripping wire smaller than AWG24ga without damaging metal fibres • Sharp wire cutters make any cutting fast and easy • Cutter blades are precision machined for durability • For insulated terminals AWG 22-10 • For non-insulated terminals AWG 22-10 • For auto ignition terminals 7-8mm • Alloy steel jaws, hardness HV550° -650° (RC52° -57°) BOLT CUTTERS Product Code Description Pkg Qty 571-500 Heavy Duty Wire Stripper 1 CABLE AND SPRING WIRE CUTTER • • • • • • Cuts cleanly eliminating frayed ends One hand shearing action Cable cutting capacity of 3/16” diameter Spring wire cutting capacity of 1/16” diameter SK-5 blades Comfortable vinyl coated handles • • • • • Drop forged Cr-Mo steel blades Satin finished blades Hardness of blades: HRC53-60 Blade clearance adjusted with eccentric bolt Textured grip Product Code Description Pkg Qty 690-350 690-352 690-354 690-356 690-358 690-360 690-362 12” Bolt Cutters 14” Bolt Cutters 18” Bolt Cutters 24” Bolt Cutters 30” Bolt Cutters 36” Bolt Cutters 42” Bolt Cutters 1 1 1 1 1 1 1 REPLACEMENT BLADES • Drop forged Chrome Vanadium steel blades • Hardness HRC56-62 Product Code Description Pkg Qty 648-040 Cable and Spring Wire Cutter 1 Product Code Description Pkg Qty 690-351 690-353 690-355 690-357 690-359 690-361 690-363 12” Replacement Blades 14” Replacement Blades 18” Replacement Blades 24” Replacement Blades 30” Replacement Blades 36” Replacement Blades 42” Replacement Blades 1 1 1 1 1 1 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 6 TOOLS WRENCHES PLIERS PIPE WRENCH SNAP RING PLIERS • High Carbon hardened and tempered • Specially formed tips grip rings securely and release easily • Permits use with both internal and external snap rings • Heavy duty construction • Malleable cast iron handle • Exceeds ANSI standard Product Code Description Pkg Qty 648-050 Snap Ring Pliers 1 MULTI-PURPOSE HANDY PLIERS • Handly multi-purpose tool can be used for many purposes, ie. hammer, nail puller, pliers, grips, etc. Product Code Description Pkg Qty 648-058 10 Multi-purpose handy pliers 1 • Chrome vanadium • Drop forged • Belt Spring Description Pkg Qty 648-054 5 pc mini pliers set 1 Description Pkg Qty 648-142 648-143 648-144 648-145 648-146 648-147 648-148 648-149 8” Heavy Duty Pipe Wrench 10” Heavy Duty Pipe Wrench 12” Heavy Duty Pipe Wrench 14” Heavy Duty Pipe Wrench 18” Heavy Duty Pipe Wrench 24” Heavy Duty Pipe Wrench 36” Heavy Duty Pipe Wrench 48” Heavy Duty Pipe Wrench 1 1 1 1 1 1 1 1 ALUMINUM WRENCH 5 PIECE MINI PLIERS SET Product Code Product Code Product Code Description Pkg Qty 648-172 648-173 648-174 648-175 648-176 648-177 12” Aluminum Wrench 14” Aluminum Wrench 18” Aluminum Wrench 24” Aluminum Wrench 36” Aluminum Wrench 48” Aluminum Wrench 1 1 1 1 1 1 www.docap.com 7 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS T-HANDLE KEY SETS • • • • • • • DRILL BITS DRILL BITS Professional quality Chrome vanadium Impact resistant handles Molded T-shape handles Gull length Go-Thru hex shaft Complete set in a steel stand Meets with ASME specifications • High Speed Steel M2 Product Code Range Rises Qty Pkg Qty 676-213 676-219 676-221 1/16”- 1/4” 1mm - 10mm 1/16” - 3/8” 64th .5mm 64th 13 19 21 1 1 1 JOBBER DRILL • High Speed Steel (M2) • Straight Shank Product Code Description Pkg Qty 648-165 648-168 10 Pc. Hex Key Set (3/32” - 3/8”) 10 Pc. Hex Key Set (2mm -10mm) 1 1 CHISEL SET 14 PC PUNCH & CHISEL SET • • • • • S.A.E. Drop forged chrome vanadium steel Specially designed anvil heads Ends are precision ground and highly polished Comes in a heavy duty roll pouch Product Code Range Pkg Qty 672-004 672-005 672-006 672-007 672-008 672-009 672-010 672-011 672-012 672-013 672-014 672-015 672-016 672-017 672-018 672-019 672-020 672-021 672-022 672-023 672-024 672-025 672-026 672-027 672-028 672-029 672-030 672-031 672-032 672-036 672-040 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32” 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2” 9/16” 5/8” 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 Product Code Range Pkg Qty 673-018 1/8” 10 DOUBLE END • High Speed Steel (M2) • Straight Shank Product Code Description Pkg Qty 690-214 14 Pc punch & chisel assortment 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 8 TOOLS REDUCED SHANK 204 PC DRILL SET • High Speed Steel (M2) • Straight Shank Product Code Range Pkg Qty 673-316 673-324 673-432 1/2” - 1/4” 1/2 - 3/8” 5/8” - 1/2” 5 5 5 EXTRA SHORT • Includes long lasting titanium coated high speed steel drill bits • Complete assortment of power tool accessories for work on metal, masonry and wood • Includes large selection of the most popular sizes of screwdriver bits and nut drivers • High Speed Steel (M2) • Straight Shank Product Code Range Pkg Qty 674-008 674-012 1/8” 3/16” 10 10 Contents: 29 PIECE TITANIUM DRILL BITS • With 118 degree cutting angle • 1/16” – 1/2” in size • 1/64” increments Product Code Description Pkg Qty 676-280 29 pc. Titanium Drill Bits 1 BURRS • Tungsten • Double cut burr (for cleaner cuts) • 1/4” shank Product Code Description Pkg Qty 676-050 676-060 676-065 676-070 676-075 676-080 3/8” x 3/4” Cylinder Burr 3/8” x 5/16” Ball Shape Burr 3/8” x 3/4” Pointed Tree Shape Burr 3/8” x 3/4” Round Tree Shape Burr 3/8” x 1.1/16” 14° Included Angle 3/8” x 5/8” Oval Shape Burr 1 1 1 1 1 1 51 - Titanium-coated HSS drill bits 5 pcs of: 1/32, 1/16, 5/64, 3/32, 1/8, 9/64 6 pcs of: 7/64, 5/32 2 pcs of: 3/16 1 pc of: 11/64, 7/32, 15/64, 9/32, 5/16 11 Masonry drill bits: 7/64, 5/32, 11/64, 3/16, 7/32, 15/64, 1/4, 17/64, 5/16, 3/8, 7/16 42 Nitride treated high speed steel drill bits 4 pcs of: 1/32, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 1 pc of: 11/64, 3/16, 7/32, 15/64, 1/4, 17/64, 9/32, 5/16, 3/8, 7/16 3 Long 12” Masonry drill bits: 5/16, 7/16, 1/2 8 Wood Boring drill bits: 5/32 (2), 3/16, 1/4, 9/32, 5/16, 3/8, 7/16 6 Wood flat bits: 7/16, 1/2, 5/8, 3/4, 7/8, 11⁄4 4 — 12” Long wood flat bits: 5/16, 7/16, 1/2, 9/16 3 Hex Shank Pilot bits: 1/16, 1/8, 5/32 20 - 2” Screwdriver bits - 4 Slotted: 1/8, 3/16, 1/4, 9/16 - 3 Phillips: #1, #2, #3 - 3 Pozi: #1, #2, #3 - 7 Torx: T10, T15, T20, T25, T27, T30, T40 - 3 Robertson: S1, S2, S3 27 - 1” Screwdriver bits: 1/8, 5/32, 13/64, 15/64, 9/32, 5/16, - Phillips: #1, #2, #3 - Robertson(2 each): S1, S2, S3 - Torx: T10, T15, T20, T25, T27, T30, T40 - Slot: 1/8, 3/16, 1/4, 9/32 - Pozi: #1, #2, #3 - 4 Hex: 3, 4, 5, 6 mm 3 Cupped nail sets: 1/16, 3/32, 1/8 10 Nut drivers: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 3 Drill stoppers: 1/8, 3/16, 5/16 4 Hole Saws: 1.1/4, 1.1/2, 1.3/4, 2.1/8 1 Hole Saw adaptor 3 Screw finders 1 Drill gauge 1 Center punch 1 — 25mm Allen wrench 1 — 2” Magnetic Extension Product Code Description Pkg Qty 676-260 204pc Drill Set 1 www.docap.com 9 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS MEDIUM AND HEAVY DUTY DRILL CHUCK DRILL CHUCK • Packaged with the key inside the box KEYLESS DRILL CHUCK Product Code Description Thread Mount Pkg Qty Product Code Capacity Capacity Thread Mount Pkg Qty 695-002 Heavy Duty 0 - 1/2” 1/2” - 20 1 695-011 695-015 695-016 695-022 695-024 695-026 695-027 Medium Duty Medium Duty Medium Duty Heavy Duty Heavy Duty Heavy Duty Taper Mount 1/16” - 3/8” 5/64” - 1/2” 5/64” - 1/2” 0 - 3/8” 0 - 1/2” 0 - 1/2” 0 - 1/2” 3/8-24 1/2-20 3/8-24 3/8-24 1/2-20 3/8-24 JT6 1 1 1 1 1 1 1 • Perfect application for DIY and professional field • Featured with high quality and performance plastic sleeve which prevents it from rusting DRILL CHUCKS - KEYS Product Code Capacity Thread Mount Pkg Qty 695-021 1/16” - 3/8” 1/2” - 20 1 KEYLESS TAPER MOUNT DRILL CHUCK • Super Heavy Duty • High accuracy and precision design, makes this model suitable for CNC machines and machine center • All parts are ground, heat treated and surface treated • S-Type • Capacity 0 – ½” • JT6 Thread Mount Product Code Capacity Thread Mount Fits on Drill Chuck Pkg Qty 695-096 695-097 695-098 695-099 1/16”-3/8” 0-3/8” 0-1/2” 5/64:-1/2” 3/8-24 3/8-24 1/2-20 1/2-20 695-011 695-022 695-024, 026 695-015, 016 1 1 1 1 SPEED ANGLE DRIVER Product Code Description Pkg Qty 695-003 Super Heavy Duty Keyless Taper Mount 1 • Heavy Duty • Industrial design, especially for milling machines and drilling machines • All hardened parts ensure long life • JT6 Thread Mount • H – Type • 90° Drive attachement with 3/8” Drill Chuck • For use with: hand drills, power drill, portable electric drills, sanding attachements, buffing attachements and other drill accessories • 3/8” -24 Thread Mount • Allows you to drill in tight corners or at akward angles • 1:1 gear ratio • Lubricated steel gears • High impact plastic body • For right or left hand use Product Code Description Pkg Qty Product Code Description Pkg Qty 695-004 Heavy Duty Keyless Taper Mount 1 695-100 Speed Angle Driver 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 10 TOOLS HOLE SAW BLADES RIVETS • Bi-metal, M3 high speed steel • Variable Tooth - 4T/6T • Cuts through stainless steel, pipe, nail embedded wood, hardwood floors, plywood and plastics HAND RIVET TOOL KIT • 1 hand rivet tool and 200 rivets • Interchangeable nozzle busings for 3/32”, 1/8”, 5/32” and 3/16” rivets SPEED RPM Product Code Description Pkg Qty 655-100 Hand Rivet Tool Kit 1 Product Code 691-036 691-040 691-044 691-048 691-052 691-056 691-060 691-064 691-068 691-072 691-076 691-080 691-084 691-090 691-092 691-096 691-100 691-104 691-110 691-112 691-116 691-120 691-128 691-132 691-136 691-144 691-148 691-152 691-160 691-162 691-168 691-176 691-184 691-192 691-200 691-208 691-216 691-224 691-232 691-240 691-248 691-256 691-264 691-272 691-280 691-288 691-304 691-320 691-352 691-368 691-384 RIVET NUTS RIVET NUT TOOL KIT • Ideal for materials that cannot be tapped or welded • May be used as a blind fasterner or anchor screw • Kit contains 40 rivet nuts and one riveting tool in a handy plastic case Product Code Description Pkg Qty 656-100 Rivet Nut Tool Kit 1 REPLACEMENT RIVET NUTS Product Code Description Pkg Qty 656-210 656-220 656-230 656-240 6-32 8-32 10-24 1/4-20 50 50 50 50 HOLE SAW - HIGH SPEED STEEL Size (in) 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1” 1.1/16” 1.1/8” 1.3/16” 1.1/4” 1.5/16” 1.3/8” 1.7/16” 1.1/2” 1.9/16” 1.5/8” 1.11/16” 1.3/4” 1.13/16” 1.7/8” 2” 2.1/16” 2.1/8” 2.1/4” 2.5/16” 2.3/8” 2.1/2” 2.9/16” 2.5/8” 2.3/4” 2.7/8” 3” 3.1/8” 3.1/4” 3.3/8” 3.1/2” 3.5/8” 3.3/4” 3.7/8” 4” 4.1/8” 4.1/4” 4.3/8” 4.1/2” 4.3/4” 5” 5.1/2” 5.3/4” 6” Size (mm) 14 16 17 19 21 22 24 25 27 29 30 32 33 35 37 38 40 41 43 44 46 48 51 52 54 57 59 60 64 65 67 70 73 76 79 83 86 89 92 95 98 102 105 108 111 114 121 127 140 146 152 Mild Steel 580 550 500 460 425 390 370 350 325 300 285 275 260 250 240 230 220 210 205 195 190 180 170 165 160 150 145 140 135 130 130 125 120 115 110 105 100 95 95 90 90 85 80 80 80 75 70 65 60 55 55 Stainless Steel 300 275 250 230 210 195 185 175 160 150 145 140 135 125 120 115 110 105 100 95 95 90 85 80 80 80 75 75 70 65 65 65 60 60 55 55 50 50 45 45 45 45 40 40 40 40 35 35 25 25 25 Cast Iron 400 365 330 300 280 260 245 235 215 200 190 180 175 165 160 150 145 140 135 130 125 120 115 110 105 100 100 95 90 85 85 80 80 75 70 70 65 65 60 60 60 55 55 55 50 50 45 45 40 35 35 Pkg Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ARBORS HOLE SAW ASSORTMENT KITS Product Code Size Description Pkg Qty 693-100 693-108 3/4” - 3” 7/8” - 2.1/2” Combination Kit Electrician Kit 1 1 Product Code 694-001 694-002 694-005 694-007 694-008 Description Size Fits Round Hex Shank Hex Shank Hex Shank Pilot Drill 1/4” 7/16” 5/16” 7/16” 1/4” 9/16” - 1.1/4” 1.5/16” - 6” 9/16” - 1.1/4” 1.5/16” - 6” 3 slots fit, all arbors Pkg Qty 1 1 1 1 10 www.docap.com 11 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS 12” COMPASS SAW COBALT BI-METAL BLADE • Precision crafted to provide dependable service • Premium high carbon steel blade, hardened and tempered • Machine field and set teeth for added sharpness and precision Product Code Description Pkg Qty Product Code Description Pkg Qty 690-040 690-041 690-042 18T 12 x 18 COBALT Bi-Metal Blade 24T 12 x 24 COBALT Bi-Metal Blade 32T 12 x 32 COBALT Bi-Metal Blade 10 10 10 690-065 6” Drywall Saw 1 HACKSAW • Complete with one (12” x 24 teeth per inch)blade • Heavy duty oval tubular construction • Strong balanced twist resistant frame holds 10” and 12” blade SAW HAND SAW • • • • • • • • For superior cutting Quality steel blade Double – coloured handle and soft grip 7 point per inch Precision made Pro quality Heat treated Hardened steel Product Code Description Pkg Qty 690-045 690-050 15” Hand Saw 22” Hand Saw 1 1 Product Code Description Pkg Qty 690-100 Hacksaw 1 4 PIECE 6” RECIPROCATING SAW • Idea for cutting wood, mild steel, PVC plastic etc • Includes: - 24 TPI bimetal blade for metal cutting - 18 TPI bi-metal blade for metal cutting - 19 TPI wood cutting plastics and fibreboard blade - 6 TPI wood cutting blade 6” DRYWALL SAW • Ideal for drywall, plastering and wood cutting Product Code Description Pkg Qty 690-060 6” Drywall Saw 1 Product Code Description Pkg Qty 690-015 Reciprocating Saw 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 12 TOOLS 14 PIECE RECIPROCATING SAW BLADE RETRACTABLE KNIVES Product Code Description Pkg Qty 690-016 14 pc. Reciprocating Saw Blade 1 Product Code Description Pkg Qty 690-165 690-166 690-167 Diecast metal, blade stored in handle Plastic handle, dial lock snap off blade Pocket-size, retractible, snap off blade 1 1 1 RETRACTABLE KNIVES REPLACEMENT BLADES 14 PIECE JIGSAW SET • Complete with plastic storage case • Ideal for cutting wood, mild steel, PVC plastic, etc. • Contains: - 24 T x 2 pc metal cobalt steel - 32 T x 2 pc metal cobalt steel - 18 T x 2 pc metal cobalt steel - 14 T x 2 pc metal cobalt steel - 6 T x 2 pc wood high alloy steel - 8 T x 2 pc wood high alloy steel - 10T x 2 pc wood high alloy steel Product Code Description Pkg Qty 690-020 14 pc Jigsaw Set 1 690-140 Knife Sharpener Pkg Qty Use on 690-166 10/slv Product Code Description Pkg Qty 690-172B Use on 690-185 and 690-168 10/slv Product Code Description Pkg Qty 690-174B Use on 690-167 10/slv • Retractable auto reload blade • All parts metal with TPR soft grip • 5 blades included • Sharpens dull knives to razor sharp in one or two strokes • No-slip grip with protective finger guard Description Description 690-170B AUTO RELOADING UTILITY KNIFE KNIFE SHARPENER Product Code Product Code Pkg Qty Product Code Description Pkg Qty 1 690-192 Auto Reloading Utility Knife 1 www.docap.com 13 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS GRIP FIT L-KNIFE SAFETY MASTER METAL KNIFE • Rubber grips on top and bottom • Comes with two Power Black L-blades • Auto-retracting blade, ergonomic handle, with adjustable depth settings. With 10 spare blades included. Product Code Description Pkg Qty SA-12D Safety Master Metal Knife 1 GRIP FIT AUTO LOCK G Product Code Part Number Description Pkg Qty L-22 L-23 690-202 Grip Fit Auto Lock L-Knife Grip Fit Twist Lock L-Knife 1 1 • Cuts heavier materials • Ergonomic design for all-day use, with rubber grips on top and bottom. • Comes with 3 Power Black G-blades GOOD GRIP SCRAPER Product Code Description Pkg Qty G-15 Auto Lock Knife 1 • • • • Superior to other scrapers, with an ergonomic handle and non-stick head Blades can be changed with your thumb No drivers or coins needed Comes with 5 no-snap Power Black L-blades GRIP FIT TWIST LOCK G • Cuts heavier materials • Ergonomic design for all-day use, with rubber grips on top and bottom. • Comes with 3 Power Black G-blades Product Code Description Pkg Qty Product Code Description Pkg Qty G-16 Twist Lock Knife 1 SCL200 SCL300 SCL600 Good Grip 200mm (8”) Scraper Good Grip 300mm (12”) Scraper Good Grip 600mm (24”) Scraper 1 1 1 FINGER GUARD KNIFE • Protect your fingers while cutting rough materials like shingles and carpet backing or compress materials like insulation • Screw-lock slider • Loaded with one Power Black blade • Two spares in the handle Product Code Part Number Description Pkg Qty L-30 690-200 Finger Guard Knife 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 14 TOOLS POWER BLACK REPLACEMENT BLADES SHEARS • Start 25% sharper than our silver blades • Higher carbon content and fewer impurities • The rigorous heat treatment process produces a snap blade better than any other in the market Product Code Description SB-50BH GB-10BH GB-50BH HB-10BNL LB-10BNL SB-50SH SB-10H SB-50H HB-10H HB-5SCL LB-5SH Product Code TB-10S • Great for both light and duty applications • Cuts wire, wood, branches, doweling, rope, cord, cardboard, leather and many other materials • Stainless steel blades, precision ground and hardened for long lasting sharp edges • Handles designed for either left or right handed users • Easy to use safety lock • Spring action • Light weight Pkg Qty 8mm wide x 0.38mm thick, slim blade. Fits all brands of slim knives (50 pack) 3/4” wide x 0.6mm thick. Fits all brands of L- & G-knives (10 pack) 3/4” wide x 0.6mm thick. Fits all brands of L- & G-knives (50 pack) 1” wide x 0.7mm thick. Fits all brands of L-knives (10 pack) 3/4” wide x 0.5mm thick, slim blade. Fits all brands of L-knives (10 pack) Solid non-striated blade Perfect for All Scrapers 1 1 1 1 1 Description Product Code Description Pkg Qty 690-321 Multi-purpose shears 1 HEAVY DUTY SHEARS • Ideal for cutting heavy cloth, fabric, rubber, upholstery, rope leather, cardboard & poultry processing • Stainless steel blades, precision ground and hardened for long lasting sharp edges • Ergonomic handles made from TPE, can be used for either left or right hand cutting • Adjustable knife edge with nut and bolt construction • Light weight SILVER REPLACEMENT BLADES Product Code MULTI-PURPOSE SHEARS Pkg Qty 8mm wide x 0.38mm thick, slim blade. Fits all brands of slim knives (50 pack) 8mm wide x 0.38mm thick, slim blade. Fits all brands of slim knives (10 pack) 8mm wide x 0.38mm thick, slim blade. Fits all brands of slim knives (50 pack) 1” wide x 0.7mm thick. 40% thicker than L-blades 1” wide x 0.7mm thick. Extra Heavy duty, single hone blades 3/4” wide x 0.5mm thick stainless L-blades Fits all L-knives (5 pack) Description 1 1 1 1 Description Pkg Qty 690-322 Multi-purpose shears 1 1 1 Pkg Qty Trapezoid blade. Fits all trapezoid -blade knives (10 pack) Product Code ELECTRICAL SHEARS • Blades are made of high carbon stainless steel with vanadium and molybdenum • One serrated blade reduces slippage • Specially designed for cutting Optical Fible • Ideal for cutting soft cable, insulting materials, electrical tape and cable ties • Designed for both left and right handed users 1 Product Code Description Pkg Qty 690-324 Electrical Shears 1 www.docap.com 15 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS HEAVY DUTY SHORT NOSE SHEARS GOOD GRIP STEEL TAPE • Great for both heavy and light duty applications • Cuts heavy cloth, fabric, rubber upholstery, rope, leather, cardboard & poultry processing • Stainless steel blades, precision ground for long lasting edges • Ergonomic handles made from TPE are designed for left/right handed users • Adjustable knife edge with nut and bolt construction • Light weight Product Code Description Pkg Qty 690-326 Heavy duty shot nose shears 1 • • • • • • Product Code Size Description Pkg Qty DVG25-75YEB DVG25-75YMEB 1” x 25’ 1” x 25’ Imperial Measurements Imperial and Metric Measurements 1 1 MULTI-PURPOSE ANGLE SHEARS • Great for both heavy and light duty applications • Cuts wire, wood, branches, doweling, rope, cord, cardboard, leather and more • Stainless steel blades, precision ground for long lasting sharp edges • Handles designed for either left or right handed users • Easy to use safety lock • Spring action • Light weight Product Code Description Pkg Qty 690-327 Multi-purpose Angle Shears 1 25’ / 7.5M x 1” with with metric and imperial graduations. Scales on both sides of the blades Pull up on the thumb slider to apply brake, push down to lock the blade Dura-coat on the blade 100x stronger than acrylic Diamond -pattern rivets GOOD GRIP STAINLESS STEEL TAPE • • • • • • • 25’ / 7.5M x 1” with with metric and imperial graduations. Scales on both sides of the blades Pull up on the thumb slider to apply brake, push down to lock the blade Nylon-coated blade 100x stronger than acrylic Diamond -pattern rivets Can be washed clean TAPE MEASURES TAPE MEASURE • Bright colours make it easy to find • Flexible steel blade coated with lacquer • Toggle locking system • Positive locking knob and automatic power return • ABS durable plastic case • Built durable plastic case • Removable belt clip • Red indicator every 10 cm and/or every foot • Structural stud indicator Product Code Size Description Pkg Qty 644-001 644-002 644-003 644-004 1” x 25’ 1” x 25’ 3/4” x 16’ 3/4 x 16’ Imperial and Metric Measurements Imperial Measurements ONLY Imperial and Metric Measurements Imperial Measurements ONLY 1 1 1 1 Product Code Size Description Pkg Qty GGS25-75YMEB 1” x 25’ Stainless Steel Imperial and Metric Measurements 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 16 TOOLS QUADSPEED LONG, STEEL TAPE • • • • • • BRUSHES 4-speed crank for fast rewind Extruded nylon coating covers the blade over the edges Wide rubberized grip for use in wet conditions while wearing gloves Rubber shock-absorbing base Hook end for one-person use Scale in both metric and imperial Product Code Part No Description Pkg Qty 645-001 PC-1 Parts Cleaning 1 Product Code Description Pkg Qty Product Code Description Pkg Qty ST13-30MEDH ST13-60MEDH 30 M / 100’ 60M / 200’ 1 1 645-002 Brass Utility 1 MICROMETER WITH COUNTER • The micrometer is a precision, hand held measuring tool • Range of measurement is from 0 to 1” • A number of suitable measuring applications Product Code Description Pkg Qty 648-098 Micrometer with counter 1 DIGITAL CALIPER • • • • • • • Range: 0-8” 7.0mm (1/4”) LCD Accuracy: 0.02 mm (0.0008”) to 100 mm (3.9”) 0.03 mm (0.0012”) above Caliper comes supplied with a battery, and is instantly operational Mechanical parts in stainless steel, hardened and ground Scale is coated with a highly resistant protection flim Case is made of industrial plastic Product Code Description Pkg Qty 648-107 Digital caliper 1 Product Code Part No Description Pkg Qty 645-004 B4 Wire Scratch - 4 x 16 Rows 1 Product Code Description Pkg Qty 645-005 Shoe Handle - 4 x 16 Row Wire 1 Product Code Description Pkg Qty 645-006 Shoe Handle - 4 x 16 Row Stainless Wire 1 www.docap.com 17 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS BRUSHES (CONT) TIES CABLE TIES Product Code Description Pkg Qty 645-007 Mini Brush Crimped Stainless Wire 1 Product Code Description Pkg Qty Length 4”, Min. Tensile Strength 18lbs Length 6”, Min. Tensile Strength 40lbs Length 8”, Min. Tensile Strength 50lbs Length 15 3/16”, Min. Tensile Strength 50lbs Length 15”, Min. Tensile Strength 120lbs 25 25 25 25 25 Length 4”, Min. Tensile Strength 18lbs Length 6”, Min. Tensile Strength 40lbs Length 8”, Min. Tensile Strength 50lbs Length 15 3/16”, Min. Tensile Strength 50lbs Length 15”, Min. Tensile Strength 120lbs 25 25 25 25 25 Description Pkg Qty Length 6”, Min. Tensile Strength 40lbs Length 8”, Min. Tensile Strength 50lbs Length 14 7/16”, Min. Tensile Strength 50lbs Length 15 1/2”, Min. Tensile Strength 120lbs 25 25 25 25 Length 6”, Min. Tensile Strength 40lbs Length 8”, Min. Tensile Strength 50lbs Length 14 7/16”, Min. Tensile Strength 50lbs Length 15 1/2”, Min. Tensile Strength 120lbs 25 25 25 25 NATURAL Product Code Description Pkg Qty 645-008 Mini Brush Stainless Wire 1 569-504 569-506 569-508 569-515 569-516 BLACK 569-604 569-606 569-608 569-615 569-616 MOUNTING TIES Product Code Part No Description Pkg Qty 645-200 6235 Bench Brush 1 TIE WIRE Product Code NATURAL 570-506 570-508 570-515 570-516 BLACK GENERAL PURPOSE • 18 gauge • 2 lb spool • Soft annealed • Approximately 328’ STAINLESS STEEL • 18 gauge • 1 lb spool • Approximately 164’ REBAR WIRE • 16 gauge • 3.125 lb spool • Approximately 291’ Product Code Description Pkg Qty 560-100 560-110 560-120 General Purpose Stainless Steel Rebar Wire 1 1 1 570-606 570-608 570-615 570-616 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 18 TOOLS CHALK LINE REEL FUNNEL HEAVY DUTY • Handy handle • Manufactured from heavy duty white polypropylene plastic • Non sparking material • For use with oil, kerosene gasoline, fuel oil, etc. • Also safe for milk products • Temperature range -40º to 250ºF • Fine Plastic body with quick release chalk line reel • Fold away winding handle, filling hole and self-chalking • Average length 30m/100’ with metal end suppor • Supplied completely with a bottle of 115g (4oz.) Blue chalk Product Code Description Pkg Qty 648-190 Chalk Line Reel 1 Product Code Part No. Description Pkg Qty 649-045 649-060 649-100 45D 60D 100D 4.1/2” Diameter 6” Diameter 10” Diameter 1 1 1 BRASS JIGGLE SIPHON VACUUM CUP • An easy and safe way to siphon liquids • No more bad spills • Non-static hose • 2 meter x 1/2” tube • Can be used around the house, in the car and boat as well as for industrial use SINGLE VACUUM CUP • • • • • • Quick release vacuum lock handle Handles stone, tile and glass Lifts or moves any smooth surface material safely Durable hi-impact nylon body Perfect for pulling out dents Product Code Description Pkg Qty 648-607 Single Vacuum Cup 1 Product Code Description Pkg Qty 648-678 Brass Jiggle Siphon 1 TRIGGER SPRAYER DOUBLE VACUUM CUP • • • • Quick release vacuum lock handle Handles stone, tile and glass Flexible heads for curved surfaces Durable hi-impact nylon body Product Code Description Pkg Qty 648-609 4.5” x 2 Double Vacuum Cup 1 Product Code Description Pkg Qty 650-721 650-722 Sprayer only Bottle only 1 1 www.docap.com 19 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS FLUID LUBRICANT PAIL PUMP TRANSFER PUMPS METAL LEVER BARREL PUMP • • • • • • 2” and 1.1/2” NPT bung nut Equipped with a telescopic suction tube to fit 15 to 55 gallon drums Aluminum construction Removable spout is threaded to fit garden hose fittings Cushioned vinyl handle P.E (polyethylene) piston rings allow it to pump agricultural & industrial chemicals • Dispenses approximately 350cc of liquid per single stroke Product Code Description Pkg Qty 638-030 Metal Lever Barrel Pump 1 • • • • Fits 5 gallon open head pails Pumps most non-corrosive fluids Equipped with 4” oil resistant hose and spout Includes drum pail cover Product Code Description Pkg Qty 638-042 Fluid Lubricant Pail Pump 1 TRANSFER PUMP WITH METAL HOSE • • • • • • • HAND PUMP 18 or 20 litre drum pump 14 strokes per litre Non drip nozzle for gear oil Made of durable plastic Downstroke action With 4.1/2’ rubber hose Suitable for transfer of engine oil, gear oil and AFT oil • • • • Product Code Description Pkg Qty 638-040 Transfer Pump with Rubber Hose 1 Metal Body Size 45 x 500mm Equipped with painted plastic handle Chain with nozzle and needle Product Code Description Pkg Qty 638-045 Hand pump 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 20 TOOLS SPRAY GUN GREASE GUN & ACCESSORIES PROFESSIONAL PAINT SPRAYER • • • • • PISTOL TYPE GREASE GUN No compressor needed For big jobs such as houses, garages, decks and fences Paint compatibility: Solvent or water base Flow Rate: 200 g/min (water) Piston Material: Hardened stainless steel • Multi-loading system (cartridge, bulk or filler pump) Product Code Description Pkg Qty 638-060 Professional Paint Sprayer 1 Description Pkg Qty 638-012 Hand Lever Type Grease Gun 1 FLEXIBLE HOSE 7 PIECE SPRAY GUN KIT • • • • Product Code • Working pressure at 4500 psi • Rubber with wire braids • 1/8” x 27 NPT thread High atomization with low air pressure Environmentally friendly Better than 75% transfer efficiency with less than 10% output pressure Stainless steel nozzle and needle allows the use of water based paint Product Code Description Pkg Qty 638-020 638-022 12” Flexible Hose 18” Flexible Hose 1 1 Product Code Description Pkg Qty 638-025 Grease Gun Coupler 1 GREASE GUN COUPLER • Made or carbon steel • Znc plated • 1/8” x 27 NPT thread Product Code Description Pkg Qty 638-070 7 Piece Spray Gun Kit 1 www.docap.com 21 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS MECHANIC’S SEAT • • • • • CREEPER Mechanic’s seat with a tubular frame Handy tool tray under the seat for small parts and tools 4 oil resistant wheels that swivel easily 7” x 14” padded seat Weight: 14lbs Product Code Description 639-000 40” CREEPER 6 WHEELS • • • • • • • Metal frame Full leatherette padded back and adjustable headrest Powder coated finish to prevent rust Oil resistant wheels Wheel size: 2.1/2” Frame Dimensions: 40” x 17” Weight: 14.4 lbs Pkg Qty Product Code Description Pkg Qty 1 639-302 40” Creeper with 6 wheels 1 Mechanic’s Seat BATTERY TERMINAL LIFTER 4 PC SAND BLASTING KIT • Removes rust and old paint from metal or wood • Etches designs into glass or plastic • Includes sandblasting gun with 5.0mm nozzle, steel pick-up tube, 6.0mm nozzle and 10ft. rubber hose • Jaws spread 2.1/2” • 2” deep • Use for pulling small gears, pulleys and bearings • Excellent tool for removing worn terminal leads from battery Product Code Description Pkg Qty 613-130 Steel battery terminal lifter 1 BATTERY FILLER Product Code Description Pkg Qty 646-300 4 pc Sand blasting Kit 1 • • • • • Acid resistant 6” flexible spout 6oz. capacity bulb Multi-purpose Will not crack in cold weather Product Code Description Pkg Qty 613-137 Battery Filler 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 22 TOOLS TESTERS POST AND TERMINAL CLEANER • Shaves off rust and corrosion BATTERY TESTER • Reveals battery charge instantly and accurately – hot or cold • Detects over – charge • Tests 6, 12 and 24 volt system Product Code 613-121 Description Pkg Qty Professional 4 way battery post and terminal center 1 Product Code Description Pkg Qty 613-150 Battery Tester 1 ANTI-FREEZE TESTER BATTERY BRUSH • • • • • Accurately tests all permanent solutions with radiator hot or cold Cleans battery posts and terminals Plastic case Use bottom brush for cleaning terminals Unscrew top and use inside brush for cleaning cables Product Code Description Pkg Qty 613-122 Plastic Case Battery Brush 1 Product Code Description Pkg Qty 613-151 Anti-Freeze Tester 1 MAGNETIC TOOLS TELESCOPIC TOOLS • Telescopic reach picks up metal objext in hard to reach places • Can be used as a pointer • Pocket clip keeps tool close at hand SIDE TERMINAL BATTERY WRENCH • Reversible 5/16” ratcheting box wrench Product Code Description Pkg Qty Product Code Description Pkg Qty 613-123 Side Terminal Battery Wrench 1 636-010 3 in 1 Telescopic Magnetic/Mirror/Scriber 1 636-012 Telescopic Pick-up Tool 1 www.docap.com 23 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 TOOLS 285 PC AUTOMOTIVE ELECTRICAL REPAIR KIT CIRCUIT TESTERS CIRCUIT AND SPARK PLUG TESTER • • • • • Test 6, 12, 24 volt systems Extra long 48” lead Finds shorts and open circuits Locate live wires Test fuses, light sockets, spark plugs Product Code Description Pkg Qty 613-152 Circuit and spark plug tester 1 CIRCUIT TESTER • Great for use on automotive, marine, industrial and agricultural applications • 2-part plastic case folds open 180° for easy access to both sides • Folds shut for carrying case • Set contains: • Trouble shoot 12 volt & 24 volts circuits • Heavy duty probe & ground clip • Extra long 48” lead Product Code Description Pkg Qty 637-100 Circuit tester 1 VOLTAGE TESTER • Test 6, 12 and 24 volt system • 60º heavy duty rubber lead wire • Replacement bulb No. 1893 1 - Wire crimping tool 1 - 6-12V tester 1 - Slotted screwdriver 1 - Phillips screwdriver 1 - Roll of electrical tape 2 - Test leads, 32” 5 - Glass style fuses 1 - Fuse puller 1 - Roll of primary wire, 60” 10 - 1/8” Wire clamps 3 - 1/4” Wire clamps 10 - Heat shrink tubes 30 - Small cable ties 10 - Medium cable ties 10 - Large cable ties 6 - Rubber grommets 26 - Assorted wire nuts 160 - Assorted insulated terminals 1 - Plastic organizer case Product Code Pkg Qty 571-520 1 AUTO & MARINE ELECTRICAL TOOL KIT Product Code Description Pkg Qty 637-200 Voltage tester 1 FLASHLIGHTS • Ultra bright LED lights • Water resistant INCLUDES: 1 - Crimping Plier 9” 2 - Electrician Screwdrivers 1 - Insulated Tape 1 - Roll Primary Wire 1 - Wire Cutter 22 - Auto Fuses 222 - Cable Ties 1 - Long Nose Plier 6” 1 - Tester 1 - Fuse Puller 2 - Test Leads 40 - PVC Magnetic Twist Ties 106 - Insulated Terminals Product Code Description Pkg Qty 648-240 7 LED Adjustable Head Lamp 1 Product Code Pkg Qty 648-241 8 LED Mini Worklight 1 571-525 1 www.docap.com TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 24 TOOLS DIGITAL MULTI-METER • • • • • • POCKET SIZE DIGITAL MULTI-METER • • • • • • • PREMIUM DIGITAL MULTI-METER Equipped with international electrical symbols Rotary Switch DC Current measurement Square wave output Diodes test Measuring resistance DC Voltage measurement and battery test Product Code Part Number Description 841-057 UT20B Pocket size Multi-meter Maximum Voltage between any terminals and grounding Displays battery deficiency, data holding, negative reading, overloading Equipped with full icons display Weight: Approximately 300g (battery included) Dimensions: 177 x 85 x 40 mm Auto & manual range selection Product Code Part Number Description 841-059 UT60A Digital Multi-meter DIGITAL MULTI-METER CLAMP • This unique kit contains the neccessary tools for fixing, repairing, installing and troubleshooting. • Equipment is packaged in a light weight case that is easy to carry and store • Maximum voltage including transient over voltage between any terminal and grounding: 500V ms. • Display 3-1/2” digits LCD display, max. display 1999 Product Code Description 841-056 Digital Multi-meter Clamp DIGITAL BATTERY LOAD TESTER • Microprocessor controlled design guarantees an easy and accurate load test, and no need to time yourself anymore • Bright LED digital display indicates both voltage and test results • Automatically turns off the load after 10 seconds and latch the voltage • Unique 3 step design: LED polarity checking function, battery load test and charging system test readout • Check both battery and charging systems • Patent Pending • For 12V battery system use only DIGITAL MULTI-METER • • • • • • • • • • Pocket size multi-meter 3-1/2 LCD” Maximum display 5% basic accuracy Auto polarization Overrange: maximum display “1” Battery: 9V Zinc NEDA 1604 or 6F22 or 006P High voltage symbol: DC 500V or AC 500V or AC 500V range will show high voltage symbol “HV” Low voltage indication will show battery symbol Size 150mm x 70mm x 24mm Weight: 150g (includes battery) Product Code 841-061 Product Code Part Number Description 841-058 DT830B Digital Multi-meter Part Number Description 50888 Digital Battery Load Tester / Charging System Analyzer www.docap.com 25 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T: 905.673.0000 F: 905.673.1333 Toll Free: 1.800.268.6955 MONTREAL 900 Montee de Liesse • St. Laurent QC T: 514.344.3536 F: 514.344.1020 Toll Free: 1.800.361.0297 EDMONTON 11716-170th St. • Edmonton AB T: 780.453.5895 F: 780.454.9302 Toll Free: 1.800.661.1909 CALGARY 4311 122nd Ave. S.E. • Calgary AB F: 780.454.9302 Toll Free: 1.800.661.1909 index Product Code 312-122 560-100 560-110 560-120 563-080 569-504 569-506 569-508 569-515 569-516 569-604 569-606 569-608 569-615 569-616 570-506 570-508 570-515 570-516 570-606 570-608 570-615 570-616 571-500 571-505 571-520 571-525 613-121 613-122 613-123 613-130 613-137 613-150 613-151 613-152 636-010 636-012 637-100 637-200 638-012 638-020 638-022 638-025 638-030 638-040 638-042 638-045 638-060 638-070 639-000 639-302 644-001 644-002 Page . . . . . . . . . . 21 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 ..........5 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 . . . . . . . . . . 18 ...........6 ...........6 . . . . . . . . . . 24 . . . . . . . . . . 24 . . . . . . . . . . 23 . . . . . . . . . . 23 . . . . . . . . . . 23 . . . . . . . . . . 22 . . . . . . . . . . 22 . . . . . . . . . . 23 . . . . . . . . . . 23 . . . . . . . . . . 24 . . . . . . . . . . 23 . . . . . . . . . . 23 . . . . . . . . . . 24 . . . . . . . . . . 24 . . . . . . . . . . 21 . . . . . . . . . . 21 . . . . . . . . . . 21 . . . . . . . . . . 21 . . . . . . . . . . 20 . . . . . . . . . . 20 . . . . . . . . . . 20 . . . . . . . . . . 20 . . . . . . . . . . 21 . . . . . . . . . . 21 . . . . . . . . . . 22 . . . . . . . . . . 22 . . . . . . . . . . 16 . . . . . . . . . . 16 Product Code Page 644-003 . . . . . . . . . . 16 644-004 . . . . . . . . . . 16 645-001 . . . . . . . . . . 17 645-002 . . . . . . . . . . 17 645-004 . . . . . . . . . . 17 645-005 . . . . . . . . . . 17 645-006 . . . . . . . . . . 17 645-007 . . . . . . . . . . 18 645-008 . . . . . . . . . . 18 645-200 . . . . . . . . . . 18 645-250 . . . . . . . . . . 1 645-265 . . . . . . . . . . 1 645-270 . . . . . . . . . . 1 645-271 . . . . . . . . . . 1 645-271H . . . . . . . . 1 645-272 . . . . . . . . . . 1 645-272H . . . . . . . . . 1 645-273 . . . . . . . . . . 1 645-273H . . . . . . . . . 1 645-275 . . . . . . . . . . 1 645-276 . . . . . . . . . . 1 646-300 . . . . . . . . . . 22 647-460 . . . . . . . . . . 3 647-706 . . . . . . . . . . 3 647-710 . . . . . . . . . . 4 647-711 . . . . . . . . . . 4 647-712 . . . . . . . . . . 4 647-713 . . . . . . . . . . 4 647-714 . . . . . . . . . . 4 647-720 . . . . . . . . . . 4 647-721 . . . . . . . . . . 4 647-722 . . . . . . . . . . 4 647-723 . . . . . . . . . . 4 647-724 . . . . . . . . . . 4 647-730 . . . . . . . . . . 4 647-731 . . . . . . . . . . 4 647-732 . . . . . . . . . . 4 647-733 . . . . . . . . . . 4 647-734 . . . . . . . . . . 4 647-740 . . . . . . . . . . 4 647-770 . . . . . . . . . . 5 647-791 . . . . . . . . . . 3 647-792 . . . . . . . . . . 3 647-793 . . . . . . . . . . 3 647-794 . . . . . . . . . . 3 647-795 . . . . . . . . . . 3 647-796 . . . . . . . . . . 3 647-797 . . . . . . . . . . 3 647-798 . . . . . . . . . . 3 647-901 . . . . . . . . . . 4 647-902 . . . . . . . . . . 5 647-904 . . . . . . . . . . 5 648-040 . . . . . . . . . . 6 Product Code Page 648-050 . . . . . . . . . . 7 648-054 . . . . . . . . . . 7 648-058 . . . . . . . . . . 7 648-098 . . . . . . . . . . 17 648-107 . . . . . . . . . . 17 648-142 . . . . . . . . . . 7 648-143 . . . . . . . . . . 7 648-144 . . . . . . . . . . 7 648-145 . . . . . . . . . . 7 648-146 . . . . . . . . . . 7 648-147 . . . . . . . . . . 7 648-148 . . . . . . . . . . 7 648-149 . . . . . . . . . . 7 648-165 . . . . . . . . . . 8 648-168 . . . . . . . . . . 8 648-172 . . . . . . . . . . 7 648-173 . . . . . . . . . . 7 648-174 . . . . . . . . . . 7 648-175 . . . . . . . . . . 7 648-176 . . . . . . . . . . 7 648-177 . . . . . . . . . . 7 648-190 . . . . . . . . . . 19 648-240 . . . . . . . . . . 24 648-241 . . . . . . . . . . 24 648-362 . . . . . . . . . . 2 648-368 . . . . . . . . . . 2 648-369 . . . . . . . . . . 2 648-369H . . . . . . . . . 2 648-370 . . . . . . . . . . 2 648-371 . . . . . . . . . . 2 648-371H . . . . . . . . . 2 648-372 . . . . . . . . . . 2 648-372H . . . . . . . . . 2 648-373 . . . . . . . . . . 2 648-373H . . . . . . . . 2 648-374 . . . . . . . . . . 2 648-375 . . . . . . . . . . 2 648-376 . . . . . . . . . . 2 648-376H . . . . . . . . . 2 648-377 . . . . . . . . . . 2 648-378 . . . . . . . . . . 2 648-379 . . . . . . . . . . 2 648-380 . . . . . . . . . . 2 648-424 . . . . . . . . . . 2 648-424H . . . . . . . . . 2 648-426 . . . . . . . . . . 2 648-426H . . . . . . . . . 2 648-428 . . . . . . . . . . 2 648-430 . . . . . . . . . . 2 648-430H . . . . . . . . . 2 648-431 . . . . . . . . . . 2 648-433 . . . . . . . . . . 2 648-433H . . . . . . . . . 2 I-1 Product Code 648-435 648-450 648-451 648-452 648-453 648-454 648-455 648-456 648-460 648-462 648-463 648-464 648-465 648-466 648-607 648-609 648-678 649-045 649-060 649-100 650-721 650-722 655-100 656-100 656-210 656-220 656-230 656-240 672-004 672-005 672-006 672-007 672-008 672-009 672-010 672-011 672-012 672-013 672-014 672-015 672-016 672-017 672-018 672-019 672-020 672-021 672-022 672-023 672-024 672-025 672-026 672-027 672-028 Page ..........2 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 ...........3 . . . . . . . . . . 19 . . . . . . . . . . 19 . . . . . . . . . . 19 . . . . . . . . . . 19 . . . . . . . . . . 19 . . . . . . . . . . 19 . . . . . . . . . . 19 . . . . . . . . . . 19 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 ..........8 Product Code Page 672-029 . . . . . . . . . . 8 672-030 . . . . . . . . . . 8 672-031 . . . . . . . . . . 8 672-032 . . . . . . . . . . 8 672-036 . . . . . . . . . . 8 672-040 . . . . . . . . . . 8 673-018 . . . . . . . . . . 8 673-316 . . . . . . . . . . 9 673-324 . . . . . . . . . . 9 673-432 . . . . . . . . . . 9 674-008 . . . . . . . . . . 9 674-012 . . . . . . . . . . 9 676-050 . . . . . . . . . . 9 676-060 . . . . . . . . . . 9 676-065 . . . . . . . . . . 9 676-070 . . . . . . . . . . 9 676-075 . . . . . . . . . . 9 676-080 . . . . . . . . . . 9 676-213 . . . . . . . . . . 8 676-219 . . . . . . . . . . 8 676-221 . . . . . . . . . . 8 676-260 . . . . . . . . . . 9 676-280 . . . . . . . . . . 9 690-015 . . . . . . . . . . 12 690-016 . . . . . . . . . . 13 690-020 . . . . . . . . . . 13 690-040 . . . . . . . . . . 12 690-041 . . . . . . . . . . 12 690-042 . . . . . . . . . . 12 690-045 . . . . . . . . . . 12 690-050 . . . . . . . . . . 12 690-060 . . . . . . . . . . 12 690-065 . . . . . . . . . . 12 690-100 . . . . . . . . . . 12 690-140 . . . . . . . . . . 13 690-165 . . . . . . . . . . 13 690-166 . . . . . . . . . . 13 690-167 . . . . . . . . . . 13 690-170B . . . . . . . . . 13 690-172B . . . . . . . . . 13 690-174B . . . . . . . . . 13 690-192 . . . . . . . . . . 13 690-214 . . . . . . . . . . 8 690-320 . . . . . . . . . . 6 690-321 . . . . . . . . . . 15 690-322 . . . . . . . . . . 15 690-324 . . . . . . . . . . 15 690-326 . . . . . . . . . . 16 690-327 . . . . . . . . . . 16 690-350 . . . . . . . . . . 6 690-351 . . . . . . . . . . 6 690-352 . . . . . . . . . . 6 690-353 . . . . . . . . . . 6 index Product Code 690-354 690-355 690-356 690-357 690-358 690-359 690-360 690-361 690-362 690-363 691-036 691-040 691-044 691-048 691-052 691-056 691-060 691-064 691-068 691-072 691-076 691-080 691-084 691-090 691-092 691-096 691-100 691-104 691-110 691-112 691-116 691-120 691-128 691-132 691-136 691-144 691-148 691-152 691-160 691-162 691-168 691-176 691-184 691-192 691-200 691-208 691-216 691-224 691-232 691-240 691-248 691-256 691-264 Page ..........6 ..........6 ..........6 ..........6 ..........6 ..........6 ..........6 ..........6 ..........6 ..........6 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 . . . . . . . . . . 11 Product Code Page 691-272 . . . . . . . . . . 11 691-280 . . . . . . . . . . 11 691-288 . . . . . . . . . . 11 691-304 . . . . . . . . . . 11 691-320 . . . . . . . . . . 11 691-352 . . . . . . . . . . 11 691-368 . . . . . . . . . . 11 691-384 . . . . . . . . . . 11 693-100 . . . . . . . . . . 11 693-108 . . . . . . . . . . 11 694-001 . . . . . . . . . . 11 694-002 . . . . . . . . . . 11 694-005 . . . . . . . . . . 11 694-007 . . . . . . . . . . 11 694-008 . . . . . . . . . . 11 695-002 . . . . . . . . . . 10 695-003 . . . . . . . . . . 10 695-004 . . . . . . . . . . 10 695-011 . . . . . . . . . . 10 695-015 . . . . . . . . . . 10 695-016 . . . . . . . . . . 10 695-021 . . . . . . . . . . 10 695-022 . . . . . . . . . . 10 695-024 . . . . . . . . . . 10 695-026 . . . . . . . . . . 10 695-027 . . . . . . . . . . 10 695-096 . . . . . . . . . . 10 695-097 . . . . . . . . . . 10 695-098 . . . . . . . . . . 10 695-099 . . . . . . . . . . 10 695-100 . . . . . . . . . . 10 841-056 . . . . . . . . . . 25 841-057 . . . . . . . . . . . 25 841-058 . . . . . . . . . . . 25 841-059 . . . . . . . . . . . 25 841-061 . . . . . . . . . . . 25 DVG25-75YMEB… . 16 G-15 ……………. . 14 G-16 ……………. . 14 GB-10BH ………… 15 GB-50BH ………… 15 GGS25-75YMEB… . .16 HB-5SCL …………. 15 HB-10BNL ……… . .15 HB-10H . . . . . . . . . . . .15 L-22 ……………… 14 L-23 ……………… 14 L-30 ……………… 14 LB-5SH…………… 15 LB-10BNL …………15 SA-12D ………… . .14 SB-10H ………… . .15 SB-50H ………… . .15 Product Code Page Product Code Page Product Code Page SB-50BH …………. 15 SB-50SH …………. 15 SCL600 ………… . .14 ST13-30MEDH…… 17 ST13-60MEDH…… 17 TB-10S ……………15 keyword index Product "C" Clamps 4 Pc Sand Blasting Kit 48" Lift - All Jack 204 Pc Drill Set 285 Automotive Electrical Repair Kit Auto & Marine Electrical Tool Kit Axes Ball Pein Machinist’s Hammers American Hickory Handles Fiberglass Handles Battery Brush Battery Filler Battery Terminal Lifter Bench Grinder Brass Jiggle Siphon Brushes Burrs Cable and Spring Wire Cutter Chalk Line Reel Chisel Set 14 Pc Punch & Chisel Set Circuit Testers Circuit & Spark Plug Tester Circuit Tester Voltage Tester Cobalt Bi-Metal Blade Creeper Crimping Tool Cutters Bolt Cutters Cable Cutters Replacement Blades Digital Battery Load Tester Digital Caliper Digital Muli-Meter Digital Multi-Meter Digital Multi-Meter Clamp Pocket Size Digital Multi-Meter Premium Digital Multi-Meter I-2 Page Product Code Series 3 22 4 9 24 24 2 3 3 3 23 22 22 3 19 17 9 6 19 8 8 24 24 24 24 12 22 5 6 6 6 6 25 17 25 25 25 25 25 647 646 647 676 571 571 648 648 648 648 613 613 613 647 648 645 676 648 648 690 690 613, 637 613 637 637 690 639 571 690 690 690 690 841 648 841 841 841 841 841 keyword index Product Drill Bits 29 Pc Titanium Drill Bits Double End Drill Bits Extra Short Jobber Drill Reduced Shank Drill Chuck Drill Chucks - Keys Keyless Drill Chuck Keyless Taper Mount Drill Chuck Medium and Heavy Duty Drill Chuck Engraver Flashlights Funnel Heavy Duty Grease Gun & Accessories Pistol Type Grease Gun Flexible Hose Grease Gun Coupler Hand Pump Heavy Duty Wire Stripper Hole Saw - High Speed Steel Arbors Hole Saw Assortment Kits Hole Saw Blades Knife Sharpener Magnetic Tools Mallet 30mm Double Face Soft Mallet Mallet with Fiberglass Handle Mechanic's Seat Micrometer with Counter One Touch Snow Brush Pliers 5 Piece Mini Pliers Set Multi-Purpose Handy Pliers Snap Ring Pliers Post and Terminal Cleaner Power Puller 1 Ton Hand Power Puller 2 Ton Hand Power Puller Retractable Knives Auto Reloading Utility Knife Finger Guard Knife Good Grip 600 Scraper Grip Fit Auto Lock G-Knife Grip Fit Twist Lock G-Knife Grip Fit Auto Lock L-Knife Grip Fit Twist Lock L-Knife Power Black Replacement Blades Retractible Knives Replacement Blades Safety Master Metal Knife Silver Replacement Blades Rivet Nuts Replacement Rivet Nuts Rivet Nut Tool Kit Rivets Hand Rivet Tool Kit Page Product Code Series 8 9 8 8 9 8 9 10 10 10 10 10 5 24 19 21 21 21 21 20 6 11 11 11 11 13 23 2 2 2 22 17 1 7 7 7 7 23 4 4 4 13 13 14 14 14 14 14 14 15 13 14 15 11 11 11 11 11 672 - 674, 676 676 673 676 674 672 673 695 695 695 695 695 563 648 649 638 638 638 638 638 571 691, 693, 694 694 693 691 690 636 648 648 648 639 648 645 648 648 648 648 613 647 647 647 690 690 LSCL GGLL- Product Saw 4 Pc 6" Reciprocating Saw 6" Drywall Saw 12" Compass Saw 14 Pc Jigsaw Set 14 Pc Reciprocating Saw Blade Hacksaw Hand Saw Shears Electrical Shears Heavy Duty Shears Heavy Duty Short Nose Shears Multi-Purpose Angle Shears Multi-Purpose Shears Shovels Drain Spade Turn Step Shovel (Track Shovel) Grain Scoop Shovel Round Point Shovel Round Point Shovel with Y Handle Sidewalk Scraper Square Point Shovel Square Point Shovel with Y Handle Side Terminal Battery Wrench Sledge Hammer with Fiberglass Handle Sledge/Club Hammers Slide Hammer Speed Angle Driver Spray Gun 7 Pc Spray Gun Kit Professional Paint Sprayer Tape Measures Good Grip Stainless Steel Tape Good Grip Steel Tape Quadspeed Long Steel Tape Tape Measure Testers Anti-Freeze Tester Battery Tester T-Handle Key Sets Ties Cable Ties Mounting Ties Tire Wire Transfer Pumps Fluid Lubricant Pail Pump Metal Lever Barrel Pump Transfer Pump with Metal Hose Trigger Sprayer Vacuum Cup Double Vacuum Cup Single Vacuum Cup Vises 4" Bench Vise Fixed Base Vises with Anvil Replacement Jaws Swivel Base Only Wrenches Aluminum Wrench Pipe Wrench SA656 656 656 655 655 I-3 Page Product Code Series 12 12 12 12 12 12 13 13 15 15 15 16 16 15 1 1 1 1 1 1 1 1 23 2 2 5 10 21 21 21 16 16 16 17 16 23 23 23 8 18 18 18 18 20 20 20 20 19 19 19 19 3 3 3 3 3 7 7 7 690 690 690 690 690 690 690 690 690 690 690 690 690 690 645 645 645 645 645 645 645 645 613 648 648 647 695 638 638 638 644 GGS DVG ST13644 613 613 613 648 569 - 570 569 570 560 638 638 638 638 650 648 648 648 647 647 647 647 647 648 648 648 TERMS AND CONDITIONS OF SALE / TERMES ET CONDITIONS DE VENTE • TERMES ET CONDITIONS DE VENTE • • TERMS AND CONDITIONS OF SALE • The following terms and conditions, including the Return Policy, are applicable to all Docap product lines. Les termes et conditions de vente suivants, incluant la politique de retour, s’appliquent sur tous les produits Docap. PAYMENT TERMS Subject to the provisions of CREDIT APPROVAL, terms are Net 30 days upon issuance of invoice; past due thereafter and payable in Canadian funds TERMES DE PAIEMENT Sujet aux conditions de l’approbation de crédit, le terme est de « Net 30 jours » à partir de la date de facturation, considéré comme en souffrance passé ce délai et payable en fonds canadiens. FREIGHT POLICY F.O.B Docap locations POLITIQUE DE TRANSPORT F.A.B. succursale Docap. Freight will be prepaid on orders of $750.00 or more on net invoice value, however, the following exceptions will apply: Le transport sera prépayé sur toute commande excédant $750.00 net sur la facture avant taxes. Toutefois, les exceptions suivantes s’appliquent : Prepaid Freight will NOT apply to the following product: • Warn Products • Bolt Bins • Drum quantity of Spray Nine Product • Produits Warn • Ensembles de boulons • Produits Spray Nine en vrac Prepaid requirements for Threaded Rod orders will be a minimum $2000.00 Le transport prépayé pour les tiges filetées sera de $2,000.00 minimum. Prepaid requirements for Spray Nine orders will be a minimum of $1000.00 Le transport prépayé pour le produit Spray Nine sera de $1,000.00 minimum. CANCELLATION Standard orders for stocked items may be cancelled without charge if communicated to Docap in time to stop the shipment. Special orders may NOT be cancelled. CANCELLATION Les commandes régulières pour les items en inventaire peuvent être cancellées sans frais en communiquant avec Docap avant l’envoi de celle-ci. Les commandes spéciales ne peuvent être cancellées. BACKORDERS Backorders will be shipped twice a month, or with next customer order, whichever comes first, however the minimum invoice of the backorder must exceed Docap’s minimum invoice amount of $40.00. RUPTURE DE MARCHANDISE Les commandes en rupture de marchandise seront envoyées 2 fois par mois ou avec la prochaine commande du client, selon la circonstance par contre la facture doit excéder le montant minimum de commande de Docap de $40.00. DISCLAIMER Not all geographical areas of Canada are covered by the above freight policy; please contact your nearest Docap office listed below for confirmation of these terms and conditions. Docap may add to, change or remove any part of these Terms and Conditions of Sale at any time, without notice. EXCEPTION Certaines exceptions s’appliquent selon votre région concernant les frais de transport, veuillez contacter le bureau de Docap le plus près, aux endroits mentionnés ci-dessous pour la confirmation de ces termes et conditions. Docap peut ajouter, changer ou enlever une de ces conditions de ventes à n’importe quel moment, sans aucun avertissement. I-4 RETURN POLICY / POLITIQUE DE RETOUR • RETURN POLICY • • POLITIQUE DE RETOUR • All returns must be authorized by a Docap Customer Service Representative. Product may only be sent back after getting a pre-authorized Return Goods Authorization (RGA) number. For an RGA number please contact your nearest Docap branch listed below. Tous les retours doivent être autorisés par un représentant du service à la clientèle de Docap. Tout produit ne peut être retourné qu’après avoir obtenu un numéro de pré-autorisation de retour de marchandise (RGA). Afin d’obtenir un numéro de pré-autorisation (RGA), veuillez contacter un représentant du service à la clientèle à la succursale Docap la plus près de chez-vous. Le produit retourné doit avoir été acheté dans les douze (12) derniers mois et représenter moins de cinq pourcent (5%) des achats de l’année par ligne de produit. Docap will accept product, returned for Credit, once in a calendar year, to a maximum of 5% of previous year’s sales, per product line. Product must be returned to Docap within 14 calendar days of the issuance of the RGA. All products must be returned with Docap issued RGA number, packing slip/invoice and packed in the original packaging including any accessories, manuals, documentation, and registration that shipped with the product. Returned product must not be installed or altered and must be in its original packaging, in saleable condition. Products that are special order, custom built, not listed or identified as discontinued products are non-returnable. The Purchaser is responsible for shipping product, prepaid, back to our location. Docap recommends that you use a carrier that offers shipment tracking for all returns and either insure your package for safe return to Docap or declare the full value of the shipment so that you are completely protected if the shipment is lost or damaged in transit. AUTHORIZED RETURNS Authorized returns may be subject to a 25% restocking charge. Any costs in excess of 25% restocking charge incurred in placing the goods in saleable condition will be charged to the Purchaser by a corresponding deduction from the allowed credit. Shipping charges will not be refunded. UNAUTHORIZED RETURNS Any unauthorized returns will NOT be accepted and will be sent to the Purchaser with shipping costs collect. CLEARANCE SALES Sales of items marked as “Clearance” or “Specials” are FINAL. There will be no returns or exchanges of those items. DEFECTIVE PRODUCT Product considered defective for credit return must be authorized by Docap. Docap in its discretion, along with its Vendors, will determine whether the returned defective products are in fact defective. All products that are deemed not defective, the Purchaser will be responsible for shipping costs of the product back to them. Le produit doit être retourné à Docap dans les quatorze (14) jours suivant l’émission du numéro de pré-autorisation. Tout produit retourné à Docap doit être accompagné du numéro de préautorisation, d’une copie de bon de livraison et/ou d’une copie de la facture originale, dans son emballage original incluant tout accessoire, manuels, documentation et enregistrement inclus à l’origine. Le produit retourné ne doit pas avoir été installé ou modifié et doit être dans son emballage original, en condition de revente. Les items commandés spécialement, assemblés sur mesure, non listés ou identifiés comme discontinués sont non-retournables. L’acheteur doit assumer l’expédition, port payé, vers la succursale Docap. Afin de sécuriser le retour, Docap recommande d’utiliser un transporteur qui offre le service de repérage et d’assurer le colis ou de mentionner une valeur déclarée pour tout retour. Ceci permettra de compenser en cas de perte ou dommages en cours de transit. Si vous choisissez d’utiliser un transporteur n’offrant pas ces services, vous devrez assumer les pertes ou dommages encourus durant l’expédition. RETOURS AUTORISÉS Les retours autorisés peuvent être sujets des frais de manutention de vingt-cinq pourcent (25%). Les coûts dépassant vingt-cinq pourcent (25%) occasionnés par la remise en état des items seront déduits du montant alloué au credit. Les frais d’expédition ne seront pas remboursés. RETOURS NON AUTORISÉS Tout retour non autorisé sera refusé et retourné à l’expéditeur à ses frais. VENTE DE LIQUIDATION Toutes les ventes indiquées “Liquidation” ou “Spécial” sont FINALES. Il n’y aura ni retour ni échange sur ces items. PRODUIT DÉFECTUEUX Le retour d’un produit considéré comme défectueux doit être pré autorisé par Docap. Il sera à la discrétion de Docap, selon les directives du manufacturier de déterminer la défectuosité du produit. Pour les produits considérés comme non défectueux, le coût du transport de retour à l’expéditeur sera aux frais de celui-ci. I-5 ADDITIONAL PRODUCTS AVAILABLE AT DOCAP Our other quality products include... • • • • • • • • • Heavy Duty Electrical Products L9 Fasteners Cleaners & Disinfectants Lubricants & Lubricant Equipment Winches & Accessories CV Axles & Joints Adhesives/Sealants/Threadlockers Universal Joints Aerosol Paint Products Our suppliers I-6 DOCAP PRODUCT LITERATURE 4 pc Sand Blasting Kit Battery Terminals Expansion Plugs Manifolds Studs 285 Pc Automotive Electrical Repair Kit Block Heater Parts E-Z Lok Repair Kit Mechanic’s Seat Automotive Spray Guns Air Accessories Brake Line Adapters E-Z Lok Thread Inserts Metric Brake Lines Steel Battery Clamps Auto & Marine Electrical Tool Kit Brake Line Long Nuts Flat Fender Washers Metric Expansion (Frost) Plugs Steel Fuel Line Repairs Automotive Lightbulbs Brake Lines Fuel Line Hose Metric O-Ring Splicing Kit Steel Tubing Autotex Pink Wiper Blades Car Fuses Fuel Lines Muffler Clamps Terminal Protectors Battery Bolts Circuit Testers Fuel Sending Repair Lines Nylon Quick Connect Testers Battery Brush Copper Tubing Fuses Nylon Repair Slice Line Throttle Ball Joints Battery Cables Creeper Grease Fittings Post and Terminal Cleaner Tire & Wheel Assemblies Battery Carriers Dash Controls Grease Guns & Accessories Pressure Gauges Transfer Pumps Battery Clips Driveway Signal Gong Grommets Protector Caps Transmission Cooler Lines Battery Filler Driveway Signal Hose Hand Choke Adapter Replacement Battery Trays Universal O-Rings Battery Hold Down Electric Fans Hand Pump Replacement Side Terminal Bolts Valve Hardware Battery Post Shims Engine Stud Nuts Hose Clamps Rubber Fuel Line Wheel Wrenches Battery Terminal Lifter Engine Studs License Plate Bolts Side Terminal Battery Wrench Brass Fittings Air Brake Tubing Air Break Nylon Tubing Compression Tube Fittings Drain Cocks Heavy Duty Multiple Shut-off Cocks Inverted Flare Tube Fittings Needle Valves Pipe Fittings S.A.E 45° Flare Fittings Shut-Off Cocks Aircraft Craft Anchor Shackles Clevis Grab Hooks - Gr. 43 Clevis Grab Hooks - Gr. 70 Clevis Slip Hooks Cold Shuts Eye Grab Hooks - Gr. 43 Hitch Pins – Fold Over Handle Hitch Pins - Vinyl Handle Lap Repair Links Linch Pins Load Binder Mild Link Quick Links Quick Pins S Hook Safety Lanyard Hooks Safety Snap Hook Safety Winch Hooks Shoulder Nut Eye Bolt Snap Links Turnbuckles – Light Duty Wire Rope Clips – Malleable Wire Rope Thimbles Chain & Rigging Electrical 12V Mini Compressor 285 pc Automotive Electrical Repair Kit Auto & Marine Electrical Tool Kit Automotive Lightbulbs Block Heater Parts Breakers Cable Clamps Cable Lugs Car Fuses Digital Battery Load Tester Digital Multi-meter Dynacamp Lantern Electrical Fans Electrical Tapes Extension Cords Flashers Flashlights Fuse Box Heavy Duty Wire Stripper Nail Cable Clips Open & Close LED Sign Primary Wire Cable Single Conductor Rough Service Bulbs Solderless Terminals Switches Trouble Lights Wire Nut Connectors Circuit Testers Fuses Work Lights Connectors Crimper General Purpose Replacement Motors Heat Shrinkable Tubing I-7 DOCAP PRODUCT LITERATURE Fasteners Alloy Bar L9 Hex Bolts Zinc Dichromate Clevis Pins L9 Nuts and Washers Socket Pipe Plug Clevis Yolks Machine Screw Nut Socket Screw Keys Corrugated Bin Boxes Machine Screws Socket Set Screws Cotter Pins Machinery Bushings Spring Centre Bolts Without Nuts Fastener Assortment Drawers Metric Hexagon Head Cap Screws Spring Pins Flat Head Socket Cap Screws Metric Hexagon Nuts Steel Woodruff Keys Heavy Duty Bolt Bins Metric Socket Head Cap Screws Stove Bolts With Nuts Heavy Duty Bolt Bins Labels Metric Socket Screw Keys Stover® Automation Locknut Specifications Hex Head Cap Screws Metric Washers Stover®Automation Locknuts Hitch Pin Clips Nuts Taper Pins Key Stock Sheet Metal Screw (Tapping) Threaded Rod L9® Design Features Shimstock Washers L9® Fastening System Snap Rings Wood Screws L9® Fastening System to Solve Common Problems Socket Head Cap Screws P&N/Sutton Adjustable Button Dies Button Die Holders Centre Drills Hand Taps (Chrome Steel) Hand Taps (Ground Thread High Speed Steel) Hand Taps Set (Chrome Steel) Hand Taps Set (Ground Thread High Speed Steel) Hex Die Nuts Jobber Drill Panel Drills Reduced Shank Drills Screw Extractor/Drill Set Screw Extractors Stub Drills Tap Wrenches Tap/Button/Die Set Taper Shank Drills Tools “C” Clamps Burrs Flashlights Power Pullers Testers 4 Pc Sand Blasting Kit Cable & Spring Wire Cutter Funnel (Heavy Duty) Retractable Knives T-Handle Key Sets 48” Lift – All Jack Chalk Line Reel Grease Gun & Accessories Rivets Tie Wire 204 Pc Drill Set Chisel Set Hand Pump Rivets Nuts Ties 285 Pc Automotive Electrical Repair Kit Circuit Testers Heavy Duty Wire Stripper Saw Transfer Pumps Auto & Marine Electrical Tool Kit Cobalt Bi-Metal Blade Hole Saw – High Speed Steel Shears Trigger Sprayer Axes Creeper Knife Sharpener Shovels Vacuum Cup Ball Pein Machinist’s Hammers Crimping Tool Magnetic Tools Side Terminal Battery Wrench Vises Battery Brush Cutters Mallet Sledge Hammer w/ Fibreglass Handle Wrenches Battery Filler Digital Caliper Mechanic’s Seat Sledge/Club Hammers Battery Terminal Lifter Digital Multi-Meter Micrometer with Counter Slide Hammer Bench Grinder Drill Bits One Touch Snow Brush Speed Angle Driver Brass Jiggle Siphon Drill Chucks Pliers Spray Gun Brushes Engraver Post and Terminal Cleaner Tape Measures Miscellaneous Coveralls Docap Tie Down Outdoor Kits Rubber Tie Down Safes Safety Products Safety Vest Shimstock Tapes Telescopic Tools Ties Tie Wire Tire and Wheel Assemblies I-8 NOTES For orders or inquiries, please call your local Docap location or visit us on the web at www.docap.com I-9 NOTES For orders or inquiries, please call your local Docap location or visit us on the web at www.docap.com I-10 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B Mississauga, ON Tel: 905.673.0000 Toll Free: 1.800.268.6955 MONTRÉAL 900 Montée de Liesse St. Laurent, QC Tel: 514.344.3536 Toll Free: 1.800.361.0297 CALGARY 4311 122nd Ave. S.E. Calgary, AB Toll Free: 1.800.661.1909 EDMONTON 11716-170th St. Edmonton, AB Tel: 780.453.5895 Toll Free: 1.800.661.1909
Similar documents
brass fittings
TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
electrical
• Trouble shoot 12 volt & 24 volts circuits
• Heavy duty probe & ground clip
• Extra long 48” lead
fasteners
3/8 x 3/4
3/8 x 1
3/8 x 1 ¼
3/8 x 1 ½
3/8 x 1 ¾
3/8 x 2
3/8 x 2 ¼
3/8 x 2 ½
3/8 x 2 ¾
3/8 x 3
3/8 x 3 ½
3/8 x 4
7/16 x 1
7/16 x 1 ½
7/16 x 2
7/16 x 2 ½
7/16 x 3
7/16 x 3 ½
7/16 x 4
1/2 x 1
1/2 x 1 ...
Part Number
en français - Ombudsman for Banking Services and Investments
rapide d'enquêtes sur les plaintes liées aux investissements. Si une plainte déborde, en partie ou
en totalité, du cadre de son mandat, l'OSBI s'est
engagé à le signaler par écrit aux consommateurs...
