FURUNO FI-50 Navigation Instrument Series

WIND CH WIND DIGITAL MULTI COURSE
PILOT RUDDER MULTI XL
FI-501 FI-502 FI-503 FI-504 FI-505 FI-506 FI-507
0.3 kg 0.7 lb
™
™
™
™
™
™
-
™
-
™
™
™
™
™
™
™
™
™
™
™
™
™
™
-
-
™
™
™
™
™
™
™
™
™
™
™
™
™
™
™
™
™
-
™
™
™
™
™
™
™
™
™
™
-
™
™
™
™
™
™
™
™
™
™
-
™
™
™
™
™
™
™
™
™
™
™
-
-
™
™
™
™
™
™
™
™
™
™
™
™
-
™
-
-
™
™
™
™
™
™
™
-
™
™
™
™
™
-
™
™
™
™
™
™
™
-
-
-
™
™
™
™
™
™
™
™
™
™
™
™
-
-
™
™
™
™
™
™
™
™
™
™
™
-
-
™
™
™
™
™
™
™
™
™
™
™
™
™
™
™
™
-
-
™
™
™
™
™
™
™
™
™
-
-
™
™
™
™
-
-
™
™
-
-
-
™
-
™
™
-
-
-
™
™
™
-
-
™
™
™
Speed
STW (Speed through water)
SOG (Speed over ground)
Maximum speed
Average speed
VMG to windward
Log (0 – 99999nm)
Trip (0.01 – 999nm)
Wind
Apparent wind speed
Apparent wind angle
True wind speed
True wind angle
Beaufort scale angle
Maximum wind speed
Maximum true wind speed alarm
Low true wind speed alarm
High apparent wind angle alarm
Low apparent wind angle alarm
Ground wind direction
Wind sensor connector Cutout for
surface mount
(FI-501/502 only)
ø90 Hole Saw
Surface mount
175 6.9"
145 5.7"
4- ø3.5
CAN bus connector
Rudder angle
Cutout for
surface mount
Cutout for
flush mount
CAN bus connector
ø90
60 2.4"
173 6.8"
183 7.2"
4- R5
Wind Transducer
FI-5001
FI-5001L
0.3 kg 0.7 lb
80 3.1"
7.5 55
0.3" 2.2"
0.4 kg 0.9 lb
290
ø
ø13
0
4–ø5
(30 1.2")
517 20.4"
372 14.6" 70 2.8"
80 3.1"
7.5 55
0.3" 2.2"
Depth/Speed/Temp Sensor
DST-800 (Option)
0.9 kg 2.0 lb
90
ø2
ø1
30
4–ø5
(30 1.2")
865 34.1"
720 28.3"
145 5.7"
70 2.8"
Junction Box
FI-5002 (Option)
0.3 kg 0.7 lb
2–ø5
ø75 2.94"
124 4.87"
Autopilot
39 1.5"
10 17 0.7"
0.4"
194 7.6"
183 7.2"
160 6.3"
Timer
Count up timer
Count down timer
4- ø3.5
84 3.3"
Battery voltage
Battery voltage alarm
Date and time
Water temperature (two decimal points)
Air temperature
Pressure
Humidity
Wind chill temperature
Dew point
Flush mount
26 23
1.0" 0.9"
97 76
3.8" 3.0"
Environment
118 4.6"
0.5 kg 1.1 lb
50 2.0"
40 1.6"
Bearing to waypoint
Distance to waypoint
Cross Track Error and error steer bar
Target waypoint name
Target waypoint number
Latitude
Longitude
GPS satellite status
Roll
Pitching
SOG
108 4.3"
CAN bus connector
2–ø3.5
237 9.3"
Navigation
Cutout for
flush mount
Wind sensor connector
(FI-501/502 only)
FI-507
Heading
Heading
Average heading
Locked heading
Heading on next tack
COG (Course over ground)
CMG (Course made good)
DMG (Distance made good)
ROT (Rate of turn)
60
2.4"
CAN bus connector
17 0.7"
ø89
111 4.3"
-
76
3.0"
-
210
8.3"
™
™
™
™
™
49 1.9"
10
0.4"
113 4.4"
60 2.4"
™
™
™
™
™
ø89
-
115 4.5"
-
129 5.1"
115 4.5"
42.5 51.5
1.7" 2.0"
Current depth
Shallow alarm threshold
Deep alarm threshold
Anchor shallow alarm threshold
Anchor deep alarm threshold
110 4.3"
ø89
Depth
Flush mount
49 1.9"
26 1.0"
24 0.9"
111 4.4"
Surface mount
113 4.4"
60 2.4"
™
-
125 4.9"
™
-
125 4.9"
60 2.4"
™
-
44.6 45
1.8" 1.8"
™
-
ø89
™
-
45 1.8"
90 3.5"
™
™
50 2.0"
40 1.6"
™
™
350 13.8"
Port
CAN bus ×2
WIND
×1
Instruments
FI-501/502/503/504/505/506
200 7.9"
220 8.7"
52
2.0"
Engine
Fuel information
Fuel consumption
Engine RPM
ø75 2.94"
5
0.19"
14
0.57"
TRADEMARK REGISTERED
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FURUNO ELECTRIC CO., LTD. FURUNO FRANCE S.A.S. FURUNO NORGE A/S
Nishinomiya, Hyogo, Japan
Phone: +81 (0)798 65-2111
Fax: +81 (0)798 65-4200, 66-4622
Bordeaux-Mérignac, France
Phone: +33 5 56 13 48 00
Fax: +33 5 56 13 48 01
Ålesund, Norway
Phone: +47 70 102950
Fax: +47 70 102951
FURUNO POLSKA Sp. Z o.o.
FURUNO U.S.A., INC.
FURUNO ESPAÑA S.A.
FURUNO SVERIGE AB
FURUNO DEUTSCHLAND GmbH
FURUNO (UK) LIMITED
FURUNO DANMARK AS
FURUNO FINLAND OY
FURUNO EURUS LLC
Camas, Washington, U.S.A.
Phone: +1 360-834-9300
Fax: +1 360-834-9400
Havant, Hampshire, U.K.
Phone: +44 23 9244 1000
Fax: +44 23 9248 4316
Madrid, Spain
Phone: +34 91-725-90-88
Fax: +34 91-725-98-97
Hvidovre, Denmark
Phone: +45 36 77 45 00
Fax: +45 36 77 45 01
Västra Frölunda, Sweden
Phone: +46 31-7098940
Fax: +46 31-497093
Espoo, Finland
Phone: +358 9 4355 670
Fax: +358 9 4355 6710
Gdynia, Poland
Phone: +48 58 669 02 20
Fax: +48 58 669 02 21
Rellingen, Germany
Phone: +49 4101 838 0
Fax: +49 4101 838 111
St. Petersburg, Russian Federation
Phone: +7 812 767 15 92
Fax: +7 812 766 55 52
09025U Printed in Japan
Catalogue No. M-1542d
www.furuno.com
WIND
CH WIND
DIGITAL
Precision Instrumentation for Safe
MULTI / MULTI XL
COURSE PILOT
RUDDER
and Comfortable Boating
The FURUNO FI-50 Navigation Instrument Series are professionally
designed to meet the needs of all sailing and power boat vessels.
These instruments provide a wide variety of precise information,
FI-501
even under the harshest conditions, enhancing your safety at sea.
FI-502
FI-503
Each
display
utilizes
standard
CAN busThe
network
Apparent and True Wind Angle
areeasy-to-use
displayed
FI-503 displays critical digital navigation
The
FI-502unit
provides
detailed
and precise
in both analog and digital format
when
data
wind
bearing
measurements
from
60
Port
to
connectors and cabling. Data from each component may besuch
fullyas depth, speed, temp, and
connected to the FI-5001/5001L or other
weather data on a 3-way split screen.
60 Starboard, an important range for Close
NavNet
3D orofother
CAN bus wind measurementintegrated
devices. with any
Hauled
(CH) points
sail. CAN bus system providing
Data displayed
an easy “Plug and Play” installation.
Data displayed
•Apparent and true wind speed •Apparent and true wind angle •Maximum true wind speed
•MAX/LOW true wind speed alarm •High/Low apparent wind angle alarm •Beaufort wind speed
•VMG to windward
1
2
3
•Current depth •Shallow/deep alarm
•Shallow/deep anchor alarm •Wind angle
•High/Low apparent wind angle
•Boat speed •MAX/AVG STW •SOG
•MAX/AVG SOG •VMG to windward •Wind
speed •MAX true wind •MAX/LOW true wind
speed alarm •Beaufort wind speed
•LOG •Trip •Count up/down timer •Water
temperature •Air temperature •Air pressure
•Humidity •Wind chill temperature •Dew point
FI-504
1 DIN type
1.5 DIN type
FI-507
The FI-504 and FI-507 feature large digital displays with
easy-to-read characters presenting all of the information
available in the CAN bus network*. Alternating data display
mode switches the user-selected information in 3-second
intervals.
Data displayed
•Displays all information on the FI-50 series* •NAVIGATION
(Bearing/distance to WPT, XTE, WPT number/name, L/L, Satellites
tracked, Roll & Pitch) •ENVIRONMENT (Battery voltage, Time & Date)
•ENGINE (Trip fuel used, Fuel consumption, Engine RPM)
FI-505
FI-506
The FI-505 provides a digital compass
readout with an analog “Off Course”
needle that greatly assists the
helmsman in maintaining a desired
course. When connected to satellite
compass, smooth and precise ROT
(Rate Of Turn) of the boat is shown
with the analog needle. The needle
can also be used to verify autopilot
steering performance.
When connected to an autopilot,
the analog FI-506 Rudder Angle
Display shows precise rudder
angle information.
Data displayed
•Rudder angle
Data displayed
* Except ROT. ROT can be displayed on FI-505.
•Current heading •Locked heading
•Average heading •Course over ground
•ROT
Specifications of FI-50 series
Display:
Power supply:
Temperature:
Waterproofing:
Analog and digital LCD (FI-501, 502, 505)
Digital LCD (FI-503, 504, 507)
Analog (FI-506)
12 VDC, less than 0.1 A
–15°C to +55°C
IP56
Sensors and Accessories (Option)
sBright
backlit
FI-5001 displays with wide
FI-5001Lviewing angles
Auto-Backlighting feature minimizes power consumption
Wind
s Transducer
FI-5001/FI-5001L
Power supply:
12 VDC, less than 40 mA
s
Transducer cable: 30/50 m
CAN bus interface offers “Plug and Play” networking
sEasy
installation with hole-saw flush-mount design
sIdeal
for mast or bulkhead mounting configurations
sWhite
face “F1 Style” gauges provide maximum contrast
and visibility
Junction Box
Depth/Speed/Temp Sensor
FI-5002
Organic Light Emitting
Diode (OLED) Backlighting
CAN bus backbone x 2 ports
CAN bus x 6 ports
Technology reduces power consumption
Power supply: 12 VDC, less than 2 A
DST-800
sLatest
Frequency: 235 kHz
Cable:
6m
System Configurations
WIND
CH WIND
DIGITAL
FI-501
FI-502
FI-503
Apparent and True Wind Angle are displayed
in both analog and digital format when
connected to the FI-5001/5001L or other
CAN bus wind measurement devices.
The FI-502 provides detailed and precise
wind bearing measurements from 60 Port to
60 Starboard, an important range for Close
Hauled (CH) points of sail.
The FI-503 displays critical digital navigation
data such as depth, speed, temp, and
weather data on a 3-way split screen.
Basic Configurations
Wind Transducer
Wind Transducer
Wind
Digital
12 V
Digital
Wind
Data displayed
Multi
12 V
12 V
Depth/Speed/Temp
Sensor
Depth/Speed/Temp
Sensor
Sail Boat
Navnet 3D
Multi Function
Display
Network Radar Sensor
Wind Transducer
Wind
Digital
WAAS/GPS
Antenna
Depth/Speed/Temp
Sensor
Junction Box
Weather Station
Multi
Multi XL
* 12V power supplied from NavNet 3D
Power Boat
Navnet 3D
Multi Function
Display
Network Radar Sensor
Digital
Wind Transducer
Wind
Multi
Multi XL
HUB
DFF1
Transducer
WAAS/GPS
Antenna
Satellite Compass
Depth/Speed/Temp
Sensor
Junction Box
* 12V power supplied from NavNet 3D
Weather Station
CAN bus
Ethernet
others
Data displayed
•Apparent and true wind speed •Apparent and true wind angle •Maximum true wind speed
•MAX/LOW true wind speed alarm •High/Low apparent wind angle alarm •Beaufort wind speed
•VMG to windward
1
•Current depth •Shallow/deep alarm
•Shallow/deep anchor alarm •Wind angle
•High/Low apparent wind angle
2
•Boat speed •MAX/AVG STW •SOG
•MAX/AVG SOG •VMG to windward •Wind
speed •MAX true wind •MAX/LOW true wind
speed alarm •Beaufort wind speed
3
•LOG •Trip •Count up/down timer •Water
temperature •Air temperature •Air pressure
•Humidity •Wind chill temperature •Dew point
MULTI / MULTI XL
COURSE PILOT
RUDDER
Easy to install
FI-504
1 DIN type
FI-507
1.5 DIN type
The FI-504 and FI-507 feature large digital displays with
easy-to-read characters presenting all of the information
available in the CAN bus network*. Alternating data display
mode switches the user-selected information in 3-second
intervals.
Data displayed
•Displays all information on the FI-50 series* •NAVIGATION
(Bearing/distance to WPT, XTE, WPT number/name, L/L, Satellites
tracked, Roll & Pitch) •ENVIRONMENT (Battery voltage, Time & Date)
•ENGINE (Trip fuel used, Fuel consumption, Engine RPM)
FI-505
FI-506
The FI-505 provides a digital compass
readout with an analog “Off Course”
needle that greatly assists the
helmsman in maintaining a desired
course. When connected to satellite
compass, smooth and precise ROT
(Rate Of Turn) of the boat is shown
with the analog needle. The needle
can also be used to verify autopilot
steering performance.
When connected to an autopilot,
the analog FI-506 Rudder Angle
Display shows precise rudder
angle information.
Surface Mount the displays with a hole saw and install 4 screws
under the front bezel. Installations are easy and clean with a finished
appearance (1"(26mm)bulkhead protrusion)
Data displayed
•Rudder angle
Surface mount installation
Data displayed
* Except ROT. ROT can be displayed on FI-505.
•Current heading •Locked heading
•Average heading •Course over ground
•ROT
Specifications of FI-50 series
Display:
Power supply:
Temperature:
Waterproofing:
Optional “Low Profile” Flush Mounting front panels provide
a cosmetic match to NN3D Displays and a custom console
appearance (0.4"(10mm)bulkhead protrusion)
Analog and digital LCD (FI-501, 502, 505)
Digital LCD (FI-503, 504, 507)
Analog (FI-506)
12 VDC, less than 0.1 A
–15°C to +55°C
IP56
The units are designed to match the
NavNet 3D series and other navigation
equipment. The “Plug and Play” system
utilizes CAN bus interface protocol, which
gives the system exceptional interface
ability.
Flush mount installation
with optional front panel
Wind Transducer
FI-501
FI-503
MULTI FUNCTION
DISPLAY
Sensors and Accessories (Option)
JUNCTION
BOX
Easy to Read with Silver Bright LCD Display
FI-5001
FI-5001L
Wind Transducer
FI-5001/FI-5001L
The FI-50 Series utilize high-contrast, backlit LCD displays for
superior viewing even in direct sunlight. Each unit features an
easy-to-read display and 4 simple programming buttons for
operation. The function for each key and combination are printed
directly on the front panel.
Power supply:
12 VDC, less than 40 mA
Transducer cable: 30/50 m
FI-503 DIGITAL
Automatic Backlight Adjustment
The FI-50 series of instruments minimize power consumption
by turning off the backlight during the daytime. Sensors on
the front panel measure ambient lighting conditions and
adjust the on/off condition of the display backlighting
accordingly.
FI-504 MULTI
Daytime
Sunset or after
22 mm
22 mm
41 mm
Back Light
Turns On
Depth/Speed/Temp Sensor
DST-800
Frequency: 235 kHz
Cable:
6m
Automatic Detection
Junction Box
Back Light
FI-5002
CAN bus backbone x 2 ports
CAN bus x 6 ports
Power supply: 12 VDC, less than 2 A
Turns Off
Operational guide description on the front panel