TECH-MASTERS: Moly Lube

LUBRICANTS
PREVENTS ABRASION AND
FRETTING
D
TEE
RAN
R
GUA ITY FO S
L
L
QUA SSIONA
E
F
O
PR
• Reduces friction, wear and material
losses
• Increases the lifetime of the base
materials
• Ideal pre treatment at assembling of
parts
• Prevents seizing of fine threaded
compounds
• Easier handling and running-in of
mechanisms
• It forms a thin layer of molybdenum
disulfide
• Operating temperature range: -200°C to
+450°C
• Excellent in dusty and humid fields
Moly Lube
MYE
GENERAL INFORMATION
MOLY LUBE is a molybdenum disulfide powder
of very high purity. Used for the pre-treatment
of various parts before assembling. No reduction
of mechanical gaps. Makes running-in easier,
reduces friction, increases parts
lifetime. A MOLY LUBE application significantly
slows down and often eliminates “fretting”
problems (for various assembling as: bearings,
bushes, cones mounting, swinging joints, pulleys,
spindles, cogwheels etc).
TECHNICAL INFORMATION
Appearance: bluish grey/ paste
Density at 20° C: MoS2 powder (ISO 787 IXI)
Vapour pressure: below 110 kPa (1.10 bar).
Flammability: high flammable
Auto ignition: > 200°C
Temp. Resistance: - 200°C to 450°C (600°C in
non oxidizing atmosphere)
Friction coefficient: 0,03 – 0,06
MoS2 granulometry: 96 % < 2 µ
Shelf life: 12 month
Safety measures: Consult the Safety Data Sheet
Approved by the Aircraft industry PD 81600:
NATO S 749, US MIL L 23398 C;
FR no. 34593STA/SE/S5
Approved by Air Liquide: RE No.2006/ R320
according to ISO 11114-3/EN 1797 f up to
20 bar at 250°C.
Conforms to the M5 A standards of the coal mining
industries.
APPLICATION AND USE
DRY LUBRICATION FOR SLOW MOVING,
LIGHTLY AND HEAVY LOADED SURFACES
• Applications: Taps and compressed air bottles,
including oxygen, as well as mechanisms and
regulators and pipes fittings. Mechanisms
used mostly in dusty and humid environment.
For easier assembling and abrasion reduction
of cold fitting assemblies and various fitted
assemblies. Various mechanisms in extreme
temperature fields, make using of liquid, or
plasticized lubricants almost impossible. Dry
lubrication of rotating or sliding joints out of
synthetic materials, in particular on
pneumatic servomechanisms they cannot
lubricated by standard processes.
Article Nr.
270001
NOTICE
All information including images are given with the
greatest care. Still, it is appropriate to users
regardless of the test the suitability of each
product for their own purposes. The company
liable for the completeness and accuracy of
information and refuses warranty for your specific
use. Provided guarantee, relates only to the
standard conditions of sale of this product. In no
case be held responsible for incidental damages,
or damages for improper use or sale of the
product to another customer.
Name
Moly Lube
• Use: For optimum efficiency clean the surface
by using a solvent. Shake well before use.
Move the valve towards the surface and spray
in a distance of 20 to 30cm. Spray very
lightly, to avoid thick layers. Allow the film to
dry, till it becomes a mat grey. Use in well
ventilated areas. Do not spray on hot surfaces
and keep it away from ignition sources.
Content
405 ml
Section
Lubricants